692e597847
[BSP] use RT_USING_LIBC instead of RT_USING_NEWLIB
2014-10-29 13:32:36 +00:00
e5953e671c
Add mb9bf568r to bsp
2014-10-20 10:10:18 +08:00
8c2008b050
[BSP] fix compiling error for beaglebone board
2014-09-25 09:42:21 +08:00
ab20554254
[BSP] change UART flag when register device driver.
2014-09-24 11:04:57 +08:00
640db6bdbd
[BSP] change UART flag when register device driver.
2014-09-24 11:01:07 +08:00
ec64b60c06
Merge pull request #343 from wzyy2/master
...
[GDB stub]add GDB stub
2014-09-24 10:59:14 +08:00
f40d11e9bc
update project.
2014-09-21 21:51:13 +08:00
4b99afc2b9
update EMAC driver.
2014-09-21 21:50:26 +08:00
89bcb70e5f
add delay for PHY check.
2014-09-21 21:49:43 +08:00
ff4fcd5b56
add EMAC driver.
2014-09-21 21:48:26 +08:00
a8106442e1
update uart driver.
2014-09-21 21:46:50 +08:00
9da1668cfe
import CM3-M7 project.
2014-09-21 21:45:36 +08:00
daac5388af
[bsp]change BBB uart flag
2014-09-20 20:56:02 +08:00
2a1e7d56fc
[bsp]Comment stm32f407 uart6
2014-09-20 01:44:56 +08:00
62af08370b
Merge pull request #2 from RT-Thread/master
...
sync
2014-09-20 01:19:42 +08:00
77b214f1bc
[BSP]Add serial receive overflow interrupt to stm32f10x ISR.
2014-09-13 11:53:21 +08:00
04c4e5d9a4
[BSP]Fixes two writing mistake for stm32f10x.
2014-09-13 11:50:54 +08:00
537beefa70
拼写错误
...
drvers->drivers
2014-09-08 19:53:55 +08:00
a5119d696c
[BSP] Add RT_DEVICE_CTRL_BLK_GETGEOME command handling in device control of LPC176x bsp
2014-08-27 09:23:32 +08:00
a55fd4b9c1
Merge pull request #314 from grissiom/ls1b
...
Ls1b
2014-08-19 10:48:49 +08:00
39ac8baeac
ls1bdev: format code in startup.c
2014-08-18 15:19:06 +08:00
bfc140826a
ls1bdev: init application after other things initialized
2014-08-18 15:17:36 +08:00
259cfdc79f
ls1bdev: don't hardcode the uart base address in rt_hw_console_output
2014-08-18 15:14:22 +08:00
f1bc40d697
ls1bdev: add uart3 support
2014-08-18 15:13:49 +08:00
45f0e289c6
[BSP]BM9BF618S:fix timer initialization issue.
2014-08-18 11:18:56 +08:00
45b2f2f07b
[BSP]BM9BF618S:Fix timer initialization issue。
2014-08-18 10:52:17 +08:00
b98c70fc3c
test
2014-08-18 10:48:11 +08:00
915f1adc93
[BSP]BM9BF618S:fix timer initialization issue.
2014-08-18 10:11:32 +08:00
04a7c95037
[BSP]BM9BF618S:Fix timer initialization issue
2014-08-15 20:13:54 +08:00
1f05b87e5a
[bsp]stm32f4xx typo
2014-08-12 20:30:55 +08:00
4cf77e255f
[bsp]add gdb support for BBB
2014-08-12 18:39:53 +08:00
ae8e46de1f
Revert "[bsp]add gdb support for BBB"
...
This reverts commit a966dd3c38
2014-08-12 18:27:50 +08:00
a966dd3c38
[bsp]add gdb support for BBB
2014-08-12 18:27:22 +08:00
ae3b6583ce
[bsp]add gdb support for stm32f4xx
2014-08-12 18:22:04 +08:00
bc2a890ab0
[BSP] TM4C129X: fix the bug that components_init do not work in IAR project
...
1. modify each dirver's INIT_EXPORT micro.
2. modify the lwip parameters' in rtconfig.h
3. insert keep section .rti_fn* in IAR link file
4. change part id from TM4C129XNCZAD to TM4C1294NCPDT
2014-07-31 14:11:26 +08:00
0fafa355f3
Merge pull request #307 from ArdaFu/master
...
[BSP] tm4c129x Add EMAC/PHY driver
2014-07-27 06:14:35 +08:00
baf608f156
[BSP] tm4c129x: fix compile bug when turn RT_USING_LWIP
...
1. Resize RT_LWIP_SEG_NUM drom 8 to 12
2. modify gcc compile switch, using C99
2014-07-25 23:25:32 +08:00
3879133d90
[BSP] tm4c129x add eth driver
...
1. Add ETH MAC driver using DMA for Tx and Rx lwip pBuf.
2. Modify the tivaware emac library to fix the bug that PHY read is not stable when sysclk is 120MHz
3. In PHY IRQ handler, insert a dummy reading (REG_BMSR) before read PHY_STS to force update STS register.
2014-07-25 19:07:25 +08:00
1e396417d8
Revert "[BSP] tm4c129x:"
...
This reverts commit 666d12988a
2014-07-25 19:02:37 +08:00
666d12988a
[BSP] tm4c129x:
...
1. Add ETH MAC driver using DMA for Tx and Rx lwip pBuf.
2. Modify the tivaware emac library to fix the bug that PHY read is not stable when sysclk is 120MHz
3. In PHY IRQ handler, insert a dummy reading (REG_BMSR) before read PHY_STS to force update STS register.
2014-07-25 18:58:56 +08:00
4e624d857e
[bsp] Fix MB9BF618s scons building issue
2014-07-21 22:02:27 +08:00
e0c56211b4
Merge pull request #304 from ArdaFu/master
...
[bsp] Add BSP for TM4C1294XL (TI Tiva C Series Connected LaunchPad)
2014-07-21 21:35:08 +08:00
b21c35df63
[bsp] Add IAR EWARM project template for SCONS project auto generation.
2014-07-21 19:09:15 +08:00
2a269a8a2a
[bsp] Fix MB9BF618S building issue.
2014-07-21 07:28:44 +08:00
66c2d28fbf
[bsp] Add MB9BF618 porting.
2014-07-21 06:59:50 +08:00
9572d3e46a
[bsp] Fix STM32F10x compiling warning.
2014-07-21 06:23:50 +08:00
d1a4f2e8fe
Merge pull request #1 from RT-Thread/master
...
pull rt-thread master
2014-07-20 00:27:39 +08:00
f74d7f16c0
[bsp] modify the uart_driver to fit the new rt-thread serial device driver framework. Modify the template.uvproj for auto generate MDK project.
2014-07-20 00:16:37 +08:00
3610e38050
[BSP] remove rt_device_init_all() invoking.
2014-07-19 06:52:00 +08:00
21b9e64cd6
[BSP] remove COMPONENTS_INIT for lpc176x and stm32f107 porting.
2014-07-19 06:51:43 +08:00
26118499e0
[BSP] remove rt_device_init_all() invoking.
2014-07-19 06:50:00 +08:00
3a1c1c4500
[bsp] Add BSP for TM4C1294XL (TI Tiva C Series Connected LaunchPad)
2014-07-18 17:17:56 +08:00
74377b2650
[Drivers] re-write serial framework.
2014-07-18 07:21:09 +08:00
c45f5a2490
[Drivers] re-write serial framework.
2014-07-18 06:45:54 +08:00
3e50b6ac67
xplorer4330:add the linker script file.
2014-07-15 15:51:32 +08:00
000daf03e2
xplorer4330:update the startup code.
2014-07-15 15:50:58 +08:00
7b32a2bd31
lpc43xx:add the linker script file.
2014-07-15 15:42:22 +08:00
67e79c3e97
lpc43xx:update the startup code.
2014-07-15 15:40:05 +08:00
f301643494
[bsp] Fix compiling issue for LPC43xx
2014-07-15 07:36:59 +08:00
5995b7a2a1
update the xplorer4330 bsp.
2014-07-13 15:17:26 +08:00
e152b68e33
add the lpc43xx bsp support.
2014-07-13 14:13:39 +08:00
2604440ceb
[bsp] Remove none-released porting
2014-07-12 11:08:38 +08:00
23686587ff
[bsp] Fix frdm-k64f compiling issue
2014-07-12 10:39:12 +08:00
f8d2f880c3
[bsp] Remove NUC140 porting
2014-07-12 10:23:41 +08:00
5c5928f822
[bsp] Remove none-released bsp
2014-07-12 09:40:37 +08:00
7e63d17653
[bsp] Change the output files directory in LPC2478.
2014-07-12 09:28:28 +08:00
1546274d89
fixed bsp/frdm-k64f gcc compile
2014-07-03 22:08:29 +08:00
857ac7e6e6
rename frdm-k64f bsp, support gcc compile
2014-07-02 22:42:29 +08:00
6b7637f3b4
rename frdm-k64f
2014-07-02 21:23:42 +08:00
a16a512ebd
change the uart name
2014-06-29 00:50:37 +08:00
8f7ec645fd
add Freescale k64F bsp. FRDM-K64 based
2014-06-29 00:34:20 +08:00
ee78b6190c
Merge pull request #288 from grissiom/zynq-7000
...
bsp: add zynq7000
2014-06-27 14:15:11 +08:00
97fb91dcc6
bsp: add zynq7000
2014-06-27 14:12:36 +08:00
e175b0724d
[BSP] Fix compiling error
2014-06-27 13:35:12 +08:00
2c5cfe4bcf
ls1b: cleanup code
2014-05-29 12:35:17 +08:00
6f53402e03
ls1b: add nostartfiles to LFLAGS
...
We don't need the crt0 from the toolchain.
2014-05-29 12:32:46 +08:00
a87ae1abee
ls1b: add rt_init section
2014-05-29 12:30:39 +08:00
adbe1ea390
Merge pull request #282 from ralfak/patch-4
...
Update SConscript
2014-05-22 22:31:24 +08:00
8c3f9b950e
Merge pull request #281 from ralfak/patch-3
...
Update stm32_rom.ld
2014-05-22 22:30:53 +08:00
4febbb20eb
Update SConscript
2014-05-22 21:02:13 +08:00
aed251280a
Update stm32_rom.ld
2014-05-22 20:56:40 +08:00
1f5e80a51a
Update rtconfig.py
...
add keil fpu support and gcc fpu support in scons building
2014-05-22 20:52:48 +08:00
e963de9aa1
update stm32f107 ethernet driver: add more debug cmd.
2014-05-16 18:37:13 +08:00
e32c1afa3a
update stm32f107 ethernet driver: optimize eth_rx, use memcpy.
2014-05-15 21:46:26 +08:00
072fd38a43
update stm32f107 ethernet driver: update dump function.
2014-05-15 21:36:40 +08:00
f0e5ee2d32
update stm32f107 ethernet driver: update ETH GPIO setting.
2014-05-15 21:30:25 +08:00
f28aa5e748
update stm32f107 ethernet driver: update hardware checksum setting.
2014-05-15 20:45:55 +08:00
a5b99acedf
update stm32f107 ethernet driver: update MII/RMII setting.
2014-05-15 20:39:43 +08:00
d01e0e9817
format code by Astyle.
2014-05-15 20:32:16 +08:00
075f79708a
[bsp/stm32f40x] code cleanup.
2014-04-27 10:02:52 +08:00
ce01270632
Merge pull request #272 from wzyy2/master
...
[bsp/stm32f40x] code style change
2014-04-25 21:23:05 +08:00
764c271c2c
Update emac.c
...
Fix PHY chip(dp83848c) init failed without Active Network.
2014-04-25 19:08:29 +08:00
9d07b6708f
[bsp/stm32f40x] code style change
...
TAB to 4 space
2014-04-25 18:37:06 +08:00
5a7e80bd6b
[bsp/stm32f40x] fix the uart3
2014-04-25 16:10:41 +08:00
ab4d18a137
[bsp/taihu] fix the link error
...
The taihu.lds hardcoded the path of start_gcc.o. Change it as the layout
of build/ has change by commit a03816ef9a
2014-04-14 18:01:50 +08:00
7d7390a188
[bsp/rva8] add mission header in rtt_api.h
2014-04-07 11:57:28 +08:00
430f85df7c
[bsp/rva8] make sure $BUILD_ROOT_DIR/output/target/vmm is a folder
2014-04-07 11:35:22 +08:00
023a0423ba
[bsp/rva8] cleanup drivers/SConscript
2014-04-07 11:18:58 +08:00
28f11fdd7b
[vmm] add realview-pb-a8 VMM support
2014-04-03 17:59:14 +08:00
c20ec19a96
modify the pixel format to RGB565 in sdl_fb.c
2014-03-12 16:36:39 +08:00
f615c1e92d
Revert "Merge pull request #241 from bright-pan/master"
...
This reverts commit 5aeedc4f3a3d80e414ff
2014-03-03 12:07:13 +08:00
a4cd949519
Fix uart device driver for gpio remap and hardware flow control.
...
Add uart4 and uart5 device driver.
2014-02-26 11:22:08 +08:00
ff302f2863
Merge pull request #227 from RTsien/master
...
Add supports for UART0 to UART5 of beaglebone(black)
2014-02-25 09:20:56 +08:00
d8f06c8542
simulator: fix compile errors in nand driver(512+16)
2014-02-16 14:30:58 +08:00
a6fa98f1ee
simulator: fix exit issue when close RTGUI window
2014-02-09 11:24:36 +08:00
d71b86c750
friendly for uart count under 6
2014-01-11 22:03:51 +08:00
ef09b822b7
add RT_USING_UARTx and set console via uart0
2014-01-11 15:09:43 +08:00
faf3515e6b
support UART0 to UART5 straightly
2014-01-11 15:05:51 +08:00
b9c6605876
add operating definitions of UART0 to UART5
2014-01-11 15:04:19 +08:00
0ddf1023f4
Revert "BBB: init timer on startup"
...
This reverts commit 9cdf989c59
2014-01-06 21:39:17 +08:00
dd3d96e83a
[BSP] fixed a compiling warning with GCC
2014-01-04 23:07:55 +08:00
053f579eeb
[BSP] change file name for Linux building
2014-01-04 21:49:31 +08:00
28246abb5a
[BSP] [ci skip] fix list issue in SConscript
2014-01-04 07:31:41 +08:00
a043a74c7b
add the bsp for lpc407x/408x
2014-01-02 18:30:13 +08:00
9cdf989c59
BBB: init timer on startup
...
It could fix the problem encountered in
https://groups.google.com/forum/?hl=en#!topic/rt-thread-cnusers/tpqZOMsIp8I
2013-12-27 16:25:14 +08:00
712d9428ed
simulator: disable RTGUI in rtconfig.h
...
clean code in SConstruct and application.c, disable RTGUI in rtconfig.h
by default.
2013-12-08 20:39:19 +08:00
9691c659c8
It is a big patch for stm32f0x, see the fellow :
...
1. fix heap management for stm32f0xx(SRAM=8k)
2. add USART1, USART2 driver for stm32f051R8
3. fix finsh support for stm32f0x
4. fix board components initial for stm32f0x and open debug msg
5. add led driver(pc9) and test thread for stm32f0discovery board
6. add init thread for stm32f0x do components initial
7. add rcc initial for stm32f0x in rt_hw_board_init()
8. add print rcc freq information function
the console output example is:
SYSCLK_Frequency is 48000000HZ
PCLK_Frequency is 48000000HZ
HCLK_Frequency is 48000000HZ
CECCLK_Frequency is 32786HZ
ADCCLK_Frequency is 14000000HZ
USART1CLK_Frequency is 48000000HZ
I2C1CLK_Frequency is 8000000HZ
SystemCoreClock is 48000000HZ
initialize rti_start:0 done
\ | /
- RT - Thread Operating System
/ | \ 1.2.0 build Nov 15 2013
2006 - 2013 Copyright by rt-thread team
do components intialization.
initialize rti_board_end:0 done
initialize rt_hw_led_init:32768 done
initialize finsh_system_init:0 done
finsh>>
2013-11-15 14:05:30 +08:00
0701b57eaa
Merge pull request #188 from prife/master
...
simulatr: print error messages when RTT_RTGUI is invalid
2013-10-28 07:59:35 -07:00
a12892af31
simulatr: print error messages when RTT_RTGUI is invalid
2013-10-26 14:00:24 +08:00
400b96d2d9
k60: add rt_interrupt_{enter,leave} in IRQHandler
2013-10-25 20:32:48 +08:00
5f61b8ce6c
Merge pull request #184 from caicai07/k60-fix
...
K60: fix compile error
2013-10-22 23:15:36 -07:00
15a769c6e4
K60: fix compile error
2013-10-23 12:08:42 +08:00
a3bf5e2d9b
Merge pull request #181 from grissiom/rm48x50-next
...
Rm48x50 next
2013-10-22 16:22:02 -07:00
2a9e893c79
initialize timer in bsp
...
With new timer algorithm, timer should be initialized during startup. So
add them to the bsps. Use these commands to get which bsp is missing
calling the function:
% git grep rt_system_timer_init bsp|sed -n 's|bsp/\([^/]*\).*|\1|p' | sort | uniq > have_tm_init
% ls -1 bsp |sed -n 's|\([^/]*\).*|\1|p' | sort > all_bsp
% comm -3 all_bsp have_tm_init
beaglebone
lpc176x
lpc178x
ls1bdev
mb9bf506r
stm32f10x
xplorer4330
2013-10-21 00:31:10 +08:00
d3648dbc9f
rm48x50: cleanup sys_startup.c
2013-10-20 18:51:47 +08:00
81ab083ae5
rm48: move some asm file to libcpu
2013-10-20 18:51:46 +08:00
9568669109
rm48x50: add GCC support
2013-10-20 18:51:45 +08:00
2f4329430d
rm48x50: cleanup HALCoGen code
2013-10-20 04:04:59 +08:00
6bcf1bc48b
rm48x50: fix the prototype of finsh_system_init
2013-10-19 21:10:49 +08:00
a0ffbc1fb8
Merge pull request #179 from grissiom/finsh-ex
...
Finsh ex
2013-10-18 17:06:36 -07:00
1e01252824
finsh: refactor the control key handling
...
We split the history handling form the key handling. So we could handle
the direction key even if the history is disabled. As a "side effect", I
also remove the unnecessary "use_history" bit.
2013-10-18 22:36:51 +08:00
3a33906ab1
simulator/jffs2: remove _TIME_T_DEFINED when built by VC++
...
_TIME_T_DEFINED was pre-defined in order to build jffs2 with VC.
While it may cause many side effects.
2013-10-17 23:47:08 +08:00
5641360b49
simulator: add createdef.py to generate def file for VS
...
Now we can get rid off Mingw to create def file. To create def file, one
should run:
scons --def
in the bsp/simulator.
2013-10-14 22:53:59 +08:00
d092105f3a
Add tap netif driver
2013-10-10 00:41:36 +09:00
821ab3b9aa
scons script: support to generate vs2012 project xml
...
rename template.vcproj to template_vs2005.vcproj
add template_vs2012.vcxproj
NOTE: the vs2012.py is ugly, just can work.
2013-10-01 15:37:34 +08:00
09b105ecf7
use UART0 as console
2013-09-21 17:18:45 +08:00
9d09cd9f23
Import beaglebone porting
2013-09-20 21:20:51 +08:00
35cac170fa
simulator: add clang-analyze tool support
...
When CROSS_TOOL or 'RTT_CC' env is setted to 'clang-analyze', it will
use Clang to check the codes.
2013-09-07 15:15:48 +08:00
18692c29b8
simulator: get CROSS_TOOL and EXEC_PATH from env
...
Simulator get it's way to Travis CI ready.
2013-09-06 21:54:27 +08:00
c6e81b58d9
simulator: move SDL setting staff into drivers/SConstruct
...
This could not only make a cleaner SConstruct, but could also benefit
RTGUI building.
2013-09-06 21:49:53 +08:00
d70761222c
stm32f10x: fix the rtgui initialization
...
The rtgui_system_server_init prototype is wrong. And if we use
RT_USING_COMPONENTS_INIT, there is no need to call
rtgui_system_server_init again.
2013-09-03 20:09:45 +08:00
6563ae6cab
simulator: init SDL after rt_components_init
...
SDL may use DFS to open files. It should be run after
rt_components_init.
2013-08-31 16:46:36 +08:00
3d0c0af371
simulator: fix SDL initialization under Linux
...
rt_hw_sdl_start should wait untill the rtgui_graphic_set_device is
called int the sdl_loop. Use pthread_cond_wait to achieve this in Linux.
2013-08-31 16:30:32 +08:00
e301d14979
Merge pull request #132 from MrVan/sep6200
...
SEP6200 Support
2013-07-29 22:35:31 -07:00
a431a25699
Merge pull request #135 from reynoldxu/K60Fxxxx
...
K60 fxxxx
2013-07-25 03:55:52 -07:00
151ce31be8
delete K60.pro
2013-07-24 18:38:16 +08:00
8f0fffc132
fix a bug in rt_hw_uart_init() where u CAN NOT init some feature.
2013-07-24 18:34:07 +08:00
421d980b07
add NRZ feature on K60
2013-07-24 18:32:09 +08:00
a927b48049
modify codes for fractional divider
2013-07-24 18:31:26 +08:00
8846ac8c40
simulator: update to support simulator for linux
2013-07-22 23:02:03 +08:00
37ac4855da
Embedded GPLv2 license.
2013-07-21 20:01:24 +08:00
3bdbf640b7
update at91sam9260 project directory structure.
2013-07-21 17:19:30 +08:00
885301bb14
update AT91SAM9260 usart driver， using serial driver component.
2013-07-21 15:01:42 +08:00
82bc21ff7b
Cleanup and add licencse
2013-07-17 18:42:19 +08:00
73beced22a
SEP6200 Support
2013-07-17 13:37:31 +08:00
13c30f9269
update usart driver: use serial driver component.
2013-07-12 23:32:48 +08:00
b12f6bbdee
cleanup code.
2013-07-12 23:28:24 +08:00
fc9d7926e2
update project support auto initial.
2013-07-12 23:09:12 +08:00
c44b02f08c
support auto initial.
2013-07-12 23:08:46 +08:00
8890e83aa9
update DM9000 ethernet driver for auto initial.
2013-07-12 22:54:53 +08:00
020d05ca92
update SD card driver for auto initial.
2013-07-12 22:54:48 +08:00
5183697fd4
update linker script for components auto initial.
2013-07-12 22:50:50 +08:00
e749fb6e9a
cleanup code.
2013-07-12 18:38:30 +08:00
a183f1fbe9
update stm32f10x project.
2013-07-12 18:31:42 +08:00
8c2a11c234
update stm32f10x project directory structure.
2013-07-12 18:16:43 +08:00
f0d03af696
remove unused file.
2013-07-12 17:51:35 +08:00
9b45002f27
Merge pull request #129 from BernardXiong/master
...
fix compiling error in Linux.
2013-07-12 00:34:02 -07:00
de5d4cbb94
fix compiling error in Linux
2013-07-12 03:32:59 -04:00
ba0e1f6f18
Merge pull request #128 from prife/sim-init
...
simulator: update code for new component initialization support on mingw
2013-07-11 15:55:34 -07:00
02e74583c7
simulator: update code for new component initialization support on mingw
2013-07-11 23:31:34 +08:00
8711a0c986
update SConstruct.
2013-07-11 23:11:16 +08:00
5779f0abf0
CPPPATH should be string.
2013-07-11 23:10:32 +08:00
cc8301d0f1
update linker script for components auto initial.
2013-07-11 23:07:16 +08:00
0f6131de40
add K60Fxxxx bsp for TWR-K60F120M board.
2013-07-11 18:15:38 +08:00
b9f9c3b2a4
remove RT_LWIP_TCP_SND_BUF setting
...
When not configured in rtconfig.h, lwipopt.h will give us a reasonable
value(TCP_MSS * 2).
2013-07-04 18:04:47 +08:00
1dd7e05336
fix lwip 1.4.1 compiling error when enable component init
2013-06-30 22:50:33 +08:00
e468c6efdc
Merge pull request #112 from aozima/pulls
...
update libcpu/arm/cortex-m4: support lazy stack optimized.
2013-06-23 08:54:59 -07:00
f83a34b85e
Update rtthread-lpc17xx.ld
2013-06-24 00:45:10 +09:00
90ab472d61
update scons script: support THUMB-2 CODE.
2013-06-23 18:10:46 +08:00
98c8a23e94
Add component initialization.
2013-06-23 07:48:42 +08:00
3071e35c54
Merge pull request #109 from grissiom/rm48x50
...
Rm48x50
2013-06-19 01:29:12 -07:00
c986754c49
Signed-off-by: visitor83 <wolflouiswang@gmail.com>
...
format the s3c24x0 serial.c and mini2440 rtconfig.py
2013-06-18 12:51:55 +08:00
2df7fc310f
RM48 does not have cache implemented
2013-06-12 23:48:29 +08:00
4807145a71
clean up code: remove the old file.
2013-06-08 20:50:09 +08:00
228a6be077
cortex-r4: add __rt_ffs
2013-06-05 23:20:39 +08:00
480ac34445
rm48x50: remove useless reg_test code
2013-06-03 22:25:25 +08:00
24fc6e6ebb
rm48x50: VFP lazy stacking
...
You need to turn on RT_VFP_LAZY_STACKING in rtconfig.h. By default, RTT
will turn on VFP for all threads and stack all the VFP registers. When
doing lazy stacking, VFP will only be turned on for the thread who
issued VFP instructions.
Currently, if a thread turned on VFP, it cannot be turned off. RTT will
never know what time the thread doesn't need VFP any more. The thread
might could turn off the VFP for it self in proper time.
2013-05-31 20:58:08 +08:00
ec1203bfab
rm48x50: turn on VFP support
...
This support Common VFPv2 sub-architecture.
2013-05-31 18:32:21 +08:00
939c58c295
rm48x50: remove unused vPortTaskUsesFPU
2013-05-30 17:39:32 +08:00
d8755ddd93
rm48x50: move uart.c to drv_uart.c
2013-05-30 10:02:26 +08:00
4d40978a70
rm48x50: add finsh support
2013-05-29 23:39:09 +08:00
eda09ab002
rm48x50/uart.c: fix bugs
2013-05-29 23:38:10 +08:00
50c8cbe1d5
rm48x50: now it has console
2013-05-29 17:26:34 +08:00
d22496aee8
rm48x50: update HALCoGen file
2013-05-29 16:42:26 +08:00
435f305fa2
rm48x50: temperately disable the VFP register test
2013-05-26 22:15:26 +08:00
56b640ecb6
rm48x50: add vRegTestTask2
2013-05-26 22:14:24 +08:00
2805d315bd
rm48x50: fix bug in reg_test from FreeRTOS
...
It does not satisfy AAPCS.
2013-05-26 21:49:26 +08:00
85ec844de9
rm48x50: add reg_test from FreeRTOS
...
The code is GPLv2 so I think we could use it for free(both free beer and
free speech).
2013-05-26 21:16:14 +08:00
f51bce3fed
add rm48x50 bsp and libcpu
...
We currently only support building with CCS and SCons is not using.
bsp/rm48x50/HALCoGen/HALCoGen.{hcg,dil} is the HALCoGen project file.
You may need to regenerate the source file as you like, providing that:
1, IRQ is in Dispatch Mode and the table entry is IRQ_Handler. The
channel 5 in enabled and connected to IRQ.
2, RTI driver is enabled and compare3 source is selected to counter1
and the compare3 will generate tick in the period of 10ms. This
value is coresponding with RT_TICK_PER_SECOND in rtconfig.h.
In CCS, you need to create a new CCS project and create link folders
pointing at bsp/rm48x50, libcpu/arm/rm48x50 and src/, include/. Remember
to add the include path to the Build Properties.
2013-05-24 22:55:13 +08:00
60857630c0
simulator: fix serial_write
...
printf("%s") will print a NULL terminated string, while rt_serial_write
should print buffer for size length. This also fix segfault when the
string is not null terminated but specified by size.
2013-05-15 20:16:03 +08:00
Bernard Xiong
yangfasheng
aozima
陈豪
armink
tcz717
Grissiom
MikeMao
ArdaFu
nongxiaoming
geniusgogo
ralfak
yuht
Bright Pan
prife
RTsien
lgnq
caicai
reynoldxu
prife
weety
Peng Fan
visitor83