libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
14,342 Commits 14 Branches 40 Tags 1.3 GiB
Commit Graph

6259 Commits

Author SHA1 Message Date
linshire 14722a4853 Revert "提交stm32 bsp drv_pwm.c里面的一个小建议 (#6517)" 
This reverts commit a4eb5a5399.
 2022-10-28 21:07:39 -04:00
100ask-Alen a4eb5a5399
提交stm32 bsp drv_pwm.c里面的一个小建议 (#6517) 
在使用stm32的pwm驱动时，发现其初始化channel的时候是根据device->channel这个值去初始化的，device->channel这个值是在pwm_configh.h里面定义设置的，又根据rtt的pwm例程，和常规习惯，应该大多数人会更喜欢设置channel=1/2/3/4，而不是在pwm_configh.h中将channel设置为TIM_CHANNEL_1/2/3/4，因此建议drv_pwm.c做出PR中的修改。

在实际开发中，因pwm_configh.h的示例均是.channel=0，又没有做出解释说明要让.channel=TIM_CHANNEL_1/2/3/4的值，容易误操作导致没有成功输出PWM，这是我在实际开发中遇到的现实问题，因而提出此建议。
 2022-10-28 18:38:17 -04:00
linshire e01776ea76 将驱动文件中判断RT_USING_XXX改为BSP_USING_XXX,解决了部分框架层与驱动层的混用 2022-10-27 18:30:08 -04:00
Meco Man 0a533aeb79 [ch32v307] support c++ 2022-10-26 00:55:29 -04:00
Man, Jianting (Meco) 055267f049
[compiler] 增加SConscript依赖标志 AddDepend (#6534) 
* [compiler] 增加SConscript依赖标志 AddDepend

* RT_USING_NEWLIB->RT_USING_NEWLIBC RT_USING_ARM_LIBC->RT_USING_ARMLIBC

* 删除过时的板载测试例程

* [gd32] 移除无用的反汇编文件

* [bsp]移除老旧bsp中对RT_USING_NEWLIBC的手动宏定义
 2022-10-25 00:01:37 -04:00
linshire 7bc744dae9
[ch32v307] 删掉无意义的memset重载 (#6561) 2022-10-24 22:24:52 -04:00
linshire fd6cfa3bbd
replaced the judgement of RT_USING_XXX with BSP_USING, and add some… (#6554) 
* replaced the judgement of RT_USING_XXX  with  BSP_USING, and add some tips in Konfig about soft_i2c
 2022-10-23 23:08:20 -04:00
wdfk-prog e59b6c7ab4
FIX: [bsp][stm32]CAN从ACK错误恢复后发送异常 (#6511) 
* 修改ry命令，已便于自定义保存路径

* modified:   components/utilities/ymodem/ry_sy.c

* 修复从被动错误恢复后发送返回异常

* 修复在自动重传模式下,ACK异常阻塞线程
- 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断
- 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。

* 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数

* formatting格式化代码
 2022-10-23 22:37:19 -04:00
KurisaW 731bb8ba87 [bug] 修复drv_usart_v2.c 2022-10-24 10:25:25 +08:00
ItsGettingWorse 9c6d8d96ce Update drv_usart.c 
修复RX DMA 第一包收不到的bug
 2022-10-22 15:11:46 -04:00
self-confident neko 11f52eebcf
[bsp][ch32v307]补全PWM设备，并为每个PWM设备添加条件编译，减少代码量 (#6548) 
* 新增硬件定时器功能

* 新增定时器功能

* Update Kconfig

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_hwtimer.h

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* Update Kconfig

* 添加剩余的PWM设备，并为每个PWM设备添加条件编译，减少代码量

* Update drv_pwm.c

* 根据建议进行修改

* 已根据建议修改

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.h

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

* Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-10-22 11:07:04 -04:00
self-confident neko 642ba3bc93
新增CH32V307的硬件定时器功能 (#6545) 
新增CH32V307的硬件定时器功能，并在CH32V307V-R1-1V0板卡上进行了测试。
 2022-10-21 20:12:17 -04:00
spaceman 5f7d9b3e0e
[stm32-artpi-h750]去除冗余代码 与本文件36行重复 (#6522) 2022-10-20 12:19:52 -04:00
mingmiaojing 4690ed90f1 [stm32f103-fire-arbitrary] support nandflash K9F1G08U0E && LPM init && partition create && partition read/write 2022-10-20 00:28:52 -04:00
NU-LL 6723573716 [bsp/stm32] format code 2022-10-20 11:44:34 +08:00
NU-LL b380bdf071 [bsp/stm32] upgrade to rt-thread 5.0 2022-10-20 11:44:34 +08:00
NU-LL 40aaf3e7f3 [bsp/stm32] add weact mini stm32h7xx board bsp 2022-10-20 11:44:34 +08:00
Yunjie Gu 8fa9fde43a
[bsp][c28x] add support to not disable global interrupt in context-switch to enable zero-latency isr for critical interrupts. 2022-10-19 23:41:13 -04:00
Meco Man d277ee2e35 [n32] add CI queue 2022-10-19 22:21:28 -04:00
NationsHuanghanbin afe6c0386d
[n32] 增加多个BSP支持 (#6543) 
add bsp n32g43xcl-stb,n32g45xcl-stb,n32g45xml-stb,n32g45xrl-stb,n32g457qel-stb,n32l40xcl-stb,n32l43xml-stb,n32l43xrl-stb,n32l436_evb,n32wb45xl-evb
 2022-10-19 21:40:14 -04:00
zhaohaisheng 88179b75a1
[bsp][ch32v307]增加软件spi驱动 (#6532) 2022-10-19 00:23:25 -04:00
Man, Jianting (Meco) 2bcc22f6b0
[ch32v307][readme] 增加vscode编译介绍 (#6540) 2022-10-18 18:40:42 -07:00
Man, Jianting (Meco) afd1666918
[ch32v307] update readme (#6529) 
* [ch32v307] update Chinese readme

* add English readme
 2022-10-17 23:02:39 -04:00
BreederBai 3a9152c5fe
[bsp/stm32] 将spi DMA传输更改为阻塞线程方式 (#6513) 
* [bsp/stm32] 将spi DMA传输更改为阻塞线程方式

* Update bsp/stm32/libraries/HAL_Drivers/drv_spi.h

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-10-17 15:52:03 -04:00
Bernard Xiong b617a6abd2
Merge pull request #6531 from foss-for-synopsys-dwc-arc-processors/abrodkin-update 
ARC: Minor port updates
 2022-10-18 01:39:58 +08:00
Alexey Brodkin f641e8f421 ARC: rtconfig.py: Use RTT_EXEC_PATH for the toolchain location substitution 2022-10-17 14:37:18 +04:00
Alexey Brodkin 4ee100eb86 ARC: BSP: Fix timer call-backs 
In [1] we prefixed ARC Timer functions with "arc_"
and now we need to accommodate that change in RT-Thread
accordingly.

[1] 86a03d4bf9
 2022-10-17 14:37:10 +04:00
Alexey Brodkin 9fcd80a2a3 ARC: README: Fix GNU toolchain RTT_CC alias 2022-10-17 14:36:54 +04:00
Alexey Brodkin d6924d7a56 ARC: SConstruct: Fix print syntax 
In Python 3.x "print" is a function, not a command,
thus it requires braces around its arguments.

Otherwise build system fails to proceed.
 2022-10-17 14:35:46 +04:00
hg0720 fddc522d9c
[bsp][ch32v307]添加了pwm驱动 (#6519) 
* [bsp][ch32v307]添加了 pwm 驱动
 2022-10-16 20:14:08 -04:00
sheltonyu 1d77744a37 optimize emac and usart driver code 2022-10-16 17:56:50 -04:00
liYangYang 56794960d1
[RTduino]STM32F411对接RTduino软件包 (#6524) 2022-10-16 00:28:51 -04:00
YuQi 94221bbdd8
[bsp][c28x] 新增adc驱动 (#6520) 
1. 在c28x文件目录上一层再套一层文件夹ti，目前28379的项目路径为rt-thread\bsp\ti\c28x\tms320f28379d
2. 新增adc驱动与kconfig配置
 2022-10-15 00:56:00 -04:00
hg0720 76303f7bea [bsp][ch32v307]补充readme文件说明 2022-10-14 23:37:37 -04:00
Yifang 71e7efd41f
[add] 瑞萨RA6M4开发板对SEGGER-RTT作为console的使用文档 (#6512) 
* [add] 新增README文档说明

瑞萨RA6M4开发板对segger_rtt使用通知

* Update README.md

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-10-12 18:40:34 -04:00
朱天龙 (Armink) d480690f77 [bsp][stm32] Update the serialv2 driver for CPU Cache. Simplified the DMA receive code. 2022-10-12 14:21:41 +08:00
Meco Man 250de80e9a [bsp][rtduino] update readme 2022-10-12 14:20:46 +08:00
Yifang fafa611b00
[bsp][RA6M4]Add segger rtt function (#6508) 2022-10-11 23:49:11 -04:00
hg0720 90d566308d
[bsp][ch32v307]修复了模拟iic的BUG (#6505) 2022-10-11 21:35:37 -04:00
Wayne e443b56450
[bsp/nuvoton] Remove local libcpu cortex-a driver (#6504) 2022-10-10 22:42:34 -04:00
Wayne Lin ff15433cf3 Remove aarch64 CPU driver. 2022-10-11 08:59:42 +08:00
Wayne Lin d0b70ab753 Update NuWriter material. 
1. DDR timing setting.
2. README.md
3. Remove unused files.
 2022-10-11 08:59:42 +08:00
Wayne Lin 2d15f10385 Sync SConscript in application folder. 2022-10-11 08:59:42 +08:00
Wayne Lin 2825189542 Add NuMaker-HMI-MA35D1 and RTP porting. 2022-10-11 08:59:42 +08:00
Wayne Lin ece0c6eef8 Move gtimer driver to libcpu. 2022-10-11 08:46:01 +08:00
Rbb666 0eba85eed4 修改英飞凌BSP名称 2022-10-10 08:48:10 -04:00
Man, Jianting (Meco) ed1bcfbd7e
[rtduino][BSPs] translate readme to English (#6496) 2022-10-09 21:45:25 -04:00
Meco Man 8b0610fc34 [bsp][readme] 增加scons --exec-path=xxx 命令的使用说明 2022-10-10 09:42:44 +08:00
YuQi 7c122cca25
[bsp][c28x] add driver for GPIO and improve pwm's driver (#6493) 
1. 增加PWM模块的配置kconfig代码
2. 调整目录结构，新增c28x文件夹，将原有tms320f28379的porting移动至c28x文件夹下，通用设备驱动移动至c28x/libraries下
3. 增加gpio驱动代码以及外部中断触发驱动代码

目前已经在tms320f28379上通过测试
 2022-10-08 23:24:05 -04:00
bzrobotics 560a21207e FIX: [bsp][stm32] pulse_encoder driver did not handle TIM overflow 2022-10-08 22:32:45 -04:00
chenbin182 c17d5d509f
[bsp][ch32v307] 添加can驱动 (#6484) 
CH32V307 添加can驱动。
CAN1和CAN2均可以使用，而且调整好波特率
 2022-10-08 22:32:29 -04:00
Man, Jianting (Meco) f7be5fc84b
[bsp][applications][sconscript] 整理统一sconscript格式 (#6481) 
* [bsp][sconscript] 整理统一sconscript格式

* update

* update
 2022-10-03 10:43:08 -04:00
cy023 f741ccb400 Fix string comparison method 2022-10-01 14:00:21 -04:00
linshire e43a938ec1
[bsp][ch32v307] 修改部分菜单 (#6483) 
* 修改部分菜单

* change again
 2022-09-30 11:19:38 -04:00
linshire de48b65b0d
[ch32v3] 修改RT_USING为BSP_USING (#6482) 
* 修改RT_USING为BSP_USING

* Update SConscript

* Update SConscript

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-09-30 11:07:52 -04:00
Meco Man 688b6e2014 [iar] PLATFOMR更正为'iccarm' 2022-09-29 20:58:34 -04:00
Meco Man 0fadf23b8d [qemu-vexpress-a9] QEMU运行时显示qemu版本号 2022-09-29 20:58:15 -04:00
hg0720 ee57f2d0da
[ch32v307][bsp]添加了看门狗驱动 (#6474) 
添加了 ch32v307 看门狗驱动，已在 ch32v307评估板验证；
修改了 rt-thread\bsp\wch\risc-v\ch32v307v-r1\board 目录下的 Kconfig 文件；
修改了 rt-thread\bsp\wch\risc-v\Libraries\ch32_drivers 目录下的 SConscript 文件；
添加了 rt-thread\bsp\wch\risc-v\Libraries\ch32_drivers 目录下的 drv_iwdt.c 文件；
 2022-09-28 21:09:53 -04:00
liYangYang 9f97906756
[GD32][BSP]添加GD32303C-START开发板 (#6465) 
* first copy

* [GD32][BSP]添加GD32303C-START开发板

* 更新yml文件

* 更新scons脚本
 2022-09-28 12:00:43 -04:00
Meco Man 97c483fe35 [rtduino][readme] change title 2022-09-28 02:11:35 -04:00
tangzz98 82bf18b771
ESP32: Support applying patch to local IDF (#6467) 2022-09-26 00:55:51 -04:00
YuQi 5debfdd84d
[TMS320F28379] implement PWM driver (#6457) 
增加c28x芯片的pwm驱动
已经在TMS320F28379中通过测试
pwm设备框架增加如下方法：
#define PWM_CMD_SET_DEAD_TIME (RT_DEVICE_CTRL_BASE(PWM) + 8)
#define PWM_CMD_SET_PHASE (RT_DEVICE_CTRL_BASE(PWM) + 9)
#define PWM_CMD_ENABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 10)
#define PWM_CMD_DISABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 11)
 2022-09-25 22:41:00 -04:00
Man, Jianting (Meco) c7a9481831
[rtduino] 对接STM32F412 NUCLEO (#6461) 2022-09-25 22:38:35 -04:00
YangZhongQing 1c2d05d545 RTC STM32F1 Enable PWR and BKP clocks in the same time 
bsp\stm32\libraries\HAL_Drivers\drv_rtc.c在STM32F10x上有一个“RTC首次上电时BKP时钟没使能”的问题。

STM32F10x要求：
写RTC Domain and RTC registers之前需要__HAL_RCC_BKP_CLK_ENABLE（详见：stm32f1xx_hal_rtc.c里面的##### Backup Domain Access #####）

问题分析：
1、RTC首次上电时：由于HAL_RTC_Init初始化之前没有使能BKP时钟，所以对RTC registers的初始化无效。
2、然后用date命令设置时间，调用到set_rtc_time_stamp也没有__HAL_RCC_BKP_CLK_ENABLE，所以HAL_RTCEx_BKUPWrite写的值无法真正永存于BKP，重启后就丢失。
最终导致：对于RTC首次上电的情况，每次重启后RTC_BKP_DR1里的值都不是BKUP_REG_DATA，导致永远无法调用到rt_rtc_f1_bkp_update()去使能BKP时钟。

解决办法：
参考STM32F10x_StdPeriph_Lib_V3.5.0\Project\STM32F10x_StdPeriph_Examples\RTC\Calendar\main.c里面的RTC_Configuration()同时打开RCC_APB1Periph_PWR和RCC_APB1Periph_BKP
 2022-09-23 21:04:35 -04:00
supperthomas fc55785e70
[bsp][nrf52840]Add segger rtt function (#6460) 
* fix project to AC6

* add the segger_rtt function

* move Kconfig
 2022-09-23 09:38:42 -04:00
hg0720 714b93cc3d 添加了 rtc 驱动 2022-09-22 23:25:27 -04:00
BreederBai 61e1e31ca9
[bsp/stm32] 简化drv_usart中的DMA接收逻辑 (#6357) 2022-09-22 14:13:57 +08:00
YangZhongQing 50cb4be8ce
bsp beaglebone: add IAR support (#6443) 
* bsp beaglebone: add IAR template files and fix it's build error

ATTENTION:
project.* was generated by scons, so I add it to gitignore.
rtconfig.py *FLAGS located in "PLATFORM == 'iccarm'" are unverified and maybe wrong.
（我只是从STM32里面抄来，然后根据自己的理解改了一下，并没有验证这些参数的正确性，
我也不知道怎么用命令行调用这些参数来编译）

* bsp beaglebone: add beaglebone_ram.icf ROM address from uboot_cmd.txt

am335x_DDR.icf use 0x82000000, different to uboot_cmd.txt & gcc beaglebone_ram.lds,
the difference will easy cause later developer got below error:

=> go 0x80200000
## Starting application at 0x80200000 ...
undefined instruction
pc : [<8200956c>]	   lr : [<8ff62497>]
reloc pc : [<728a956c>]	   lr : [<80802497>]
sp : 8df37358  ip : 00000000	 fp : 00000002
r10: 8df4d448  r9 : 8df3feb8	 r8 : 8ffd30f8
r7 : 8ff78089  r6 : 00000002	 r5 : 80200000  r4 : 8df4d44c
r3 : 80200000  r2 : 8df4d44c	 r1 : 8df4d44c  r0 : 00000001
Flags: nzCv  IRQs off  FIQs on  Mode SVC_32
Code: 5dbffcdd bb9bdf7f abf85423 eff1f77f (7ed7daaf)
Resetting CPU ...

resetting ...

* libcpu am335x: context_iar.S rt_hw_context_switch: add thumb mode support

IAR new project defualt Processor mode is Thumb, this will cause user
easy occur the following error:
...
msh />Execption:
r00:0x8800aaa8 r01:0x802080c5 r02:0x00000000 r03:0x88009b4c
r04:0x00001000 r05:0x00000000 r06:0x00001403 r07:0x00100000
r08:0x00000000 r09:0x00000000 r10:0x0000000a
fp :0x0000000a ip :0x65687374
sp :0x00006c6c lr :0x0000008a pc :0x88008be0
cpsr:0x880001bc
software interrupt
shutdown...
(0) assertion failed at function:rt_hw_cpu_shutdown, line number:160

* bsp beaglebone: change IAR template.ewp code use Arm mode

Arm mode bin size will bigger than Thumb mode

* libcpu am335x: IAR: use rt_hw_cpu_dcache_enable instead of rt_cpu_dcache_enable

Reviewer mysterywolf say:
麻烦把rt_cpu_icache_enable 和 rt_cpu_dcache_enable, 统一改成 rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable
rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable 是其他bsp也是这么命名的 这是个命名统一的函数
 2022-09-22 14:13:34 +08:00
Meco Man 560166477e [stm32f401 nucleo] update main.c revert blinking LED 2022-09-20 10:33:12 -04:00
liyangyang f71a287a68 [RTduino]更新stm32f469的对接文件 2022-09-20 10:32:56 -04:00
Tangyuxin a4829b1c00
[fix] Fix simulator compilation warnings (#6438) 
* [fix] Fix simulator compilation warnings

* Update bsp/simulator/rtconfig_project.h

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-09-20 10:31:11 -04:00
Wayne 746d7a01bd
[bsp/nuvoton] Support NuMaker-IoT-M467 board (#6448) 
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
 2022-09-20 10:30:21 -04:00
liyangyang 4e9786cdab [RTduino]stm32f103-blue-pill更新对接文件 2022-09-19 23:36:22 -04:00
hg0720 90d9b449b1
[ch32v307v-r1] 添加了模拟iic驱动 (#6447) 2022-09-19 10:33:55 -04:00
xiao xie 4b897fea3f
[imxrt1170-m7]Adjust pro dir structure (#6446) 2022-09-19 01:20:02 -04:00
Man, Jianting (Meco) 8d3c1f7008
[rtduino]重新整理pinout (#6445) 
* [rtduino][stm32l475-pandora] 重新整理pinout

* [rtduino][bluepill] 整理pinout

* [rtduino][stm32-f401nucleo]整理pinout

* [rtduino][stm32-pandora] 整理pinout

* [rtduino][stm32f072]整理pinout
 2022-09-18 22:14:35 -04:00
liyangyang dc6b9fde98 [RTduino]stm32f401-st-nucleo 更新对接文件 2022-09-18 10:05:36 -04:00
hg0720 60d6e42941
[ch32v307v-r1] 添加dac驱动 (#6440) 2022-09-18 09:32:56 -04:00
linshire fdcee2da20
[BSP] CH32V307 add drv_adc (#6431) 
添加了ch32v307的adc驱动，已在ch32v307评估班上对adc1ch5进行了验证，并修改了kconfig以及scons脚本，可以成功编译以及使用
 2022-09-16 22:50:57 -04:00
myshowtogo 4637eb16dc Modified bsp/stm32/libraries/HAL_Drivers/drv_can.c 
修复字符串比较错误
 2022-09-16 08:36:48 -04:00
charlown 5ed3e81490
使用 __ARMCC_VERSION 代替 __CC_ARM 用以支持AC6编译 (#6436) 
将__CC_ARM 替换成 __ARMCC_VERSION 用以支持AC6编译，通过gd32f303测试。
 2022-09-16 08:13:40 -04:00
Man, Jianting (Meco) 1249bc45f9
完善bsp beaglebone的基本使用 (#6434) 
* bsp beaglebone: rerun menuconfg

* bsp beaglebone: add uart0 support

* bsp beaglebone: use uart0 as console

* bsp beaglebone: add heap init

fix rt_application_init() error:
(m != RT_NULL) assertion failed at function:rt_smem_alloc, line number:288

* bsp beaglebone: add mmu & interrupt init

must init mmu, otherwise no interrupt is generated, cause scheduler can't work.
I don't know why need mmu, just seen: bsp/rockchip/rk3568/driver/board.c

* libcpu am335x: reset interrupt controller before init vector

I think reset before init is more better

AM335X_StarterWare_02_00_01_01\system_config\armv7a\am335x\interrupt.c
IntAINTCInit()

* bsp beaglebone: full gpio driver support

* bsp beaglebone: add tftpboot way to uboot_cmd.txt

* bsp beaglebone: optimize am33xx_gpio_hdr, check irqstatus is the last one

Co-authored-by: YangZhongQing <vipox@qq.com>
 2022-09-15 23:56:31 -04:00
Meco Man 2133b8536a [stm32][bluepill] update readme 2022-09-15 23:52:23 -04:00
xiao xie a0ca06b499
[imxrt 1170]add flexspi support (#6429) 
* [imxrt 1170]add flexspi support

* format file

* format file

* update flexspi serial root clk to 80MHz

* format file
 2022-09-15 05:08:26 -04:00
Man, Jianting (Meco) 09e29c4d93
[rtduino][bluepill] 增加英语readme (#6425) 
* [rtduino][bluepill] update readme
 2022-09-14 21:44:36 -04:00
tangzz98 cb7fd304ff
ESP32_C3 migrate to ESP-IDF package (#6427) 2022-09-14 03:49:05 -04:00
xiao xie 52e1d76254
[imxrt 1170]Support us delay (#6424) 
* add us delay

* formating file
 2022-09-13 07:53:30 -04:00
Wayne c9db6ed151
[bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416) 
* [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers.

* Format files.

Co-authored-by: Wayne Lin <wclin@nuvoton.com>
 2022-09-12 07:36:11 -04:00
Harrypotter-zhs 4a83592596 完善README文件的格式 2022-09-11 09:52:20 -04:00
xiao xie 8317b9058a
[imxrt1170]update sdk files (#6405) 
* update sdk files

* add dcd config

* format files

* formating file
 2022-09-09 16:59:08 -04:00
Harrypotter-zhs 24bf4ad270 对README文件中的大小写和文章格式修改 2022-09-09 10:44:28 -04:00
xiao xie 2577fcc366
add sdio support (#6385) 
* add sdio support

* update board kconfig

* 优化SD卡挂载文件系统

* 使用通用接口实现led的闪烁操作
 2022-09-08 23:20:50 -04:00
liYangYang 19106eb3a1
[RTduino]更新blue-pill引脚分布 (#6400) 
* [RTduino]更新引脚分布

* update

* update readme
 2022-09-08 23:07:55 -04:00
Meco Man f35791e36b [rtduino] [stm32f072] update i2c device readme 2022-09-09 10:47:22 +08:00
hg0720 cd2a381a13 修改了ch32 的 readme 文件 2022-09-08 21:38:21 -04:00
小李憨憨 dd92a4979f Modify error annotations 2022-09-08 13:45:03 -04:00
liyangyang 29c6f6ed73 Remove duplicate initialization code 2022-09-08 07:19:45 -04:00
Yifang 464f827254
[annotation] renesas默认使用串口V2标准 (#6391) 2022-09-07 21:05:17 -04:00
Meco Man ce16945cba [kernel][version] 采用新的版本宏定义 
版本控制规范：https://semver.org/

目前的版本子号不是很规范，其中RT_VERSION甚至和VS那边造成了冲突
```c
/* RT-Thread version information */
#define RT_VERSION                      4L              /**< major version number */
#define RT_SUBVERSION                   1L              /**< minor version number */
#define RT_REVISION                     1L              /**< revise version number */
```

参考ESP32：
```c
/** Major version number (X.x.x) */
#define ESP_ARDUINO_VERSION_MAJOR   2
/** Minor version number (x.X.x) */
#define ESP_ARDUINO_VERSION_MINOR   0
/** Patch version number (x.x.X) */
#define ESP_ARDUINO_VERSION_PATCH   3
```

建议改成：
```c
/* Major version number (X.x.x) */
#define RT_VERSION_MAJOR   4
/* Minor version number (x.X.x) */
#define RT_VERSION_MINOR   2
/* Patch version number (x.x.X) */
#define RT_VERSION_PATCH   0
```
 2022-09-07 10:11:45 -04:00
liyangyang c75f52ff3a [RTduino]Add SPI adaptation 2022-09-07 10:11:23 -04:00