When compiling CV18xx_arch64, there are the following errors:
1. missing soc type for aarch64
2. uart device objects defined but not used
Analysis: a63c07f ("bsp: cvitek: new design for pinmux") and
114e143("bsp:cvitek: add pinmux for uart"), CV18xx_arch64 is not
considered.
Solution: Refer to the cv18xx_riscv format to add the corresponding
chip type SOC_Type_SG2002, as well as the corresponding macro
for the serial port pins and interrupts
Signed-off-by: Shicheng Chu <1468559561@qq.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Currently, the documents under bsp/cvitek are a bit
messy. There are currently four readme files:
- bsp/cvitek/README.md (Chinese)
- bsp/cvitek/c906_little/README.md (Chinese/English)
- bsp/cvitek/cv18xx_aarch64/README.md (Chinese)
- bsp/cvitek/cv18xx_risc-v/README.md (Chinese/English)
Regarding the working mode of the big + small cores, it
is meaningless to describe the small core alone, or the
large core alone. This can also be seen in the existing
files. The readme of the small core will also introduce
the programming of the large core, and vice versa.
Considering that the official default mode is
C906B + C906L. ARM large core can be treataed as a
special case. So the document structure is modified as
follows:
- Remove `bsp/cvitek/c906_little/README.md` and
`bsp/cvitek/cv18xx_risc-v/README.md`, merge them all
into `bsp/cvitek/README.md`
- Add a link to `bsp/cvitek/cv18xx_aarch64/README.md`
in `bsp/cvitek/README.md`
FIXME: The modified document does not provide English
version. Is it really necessary?
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Some drivers use INIT_BOARD_EXPORT, it is not necessary,
it is enough to use INIT_DEVICE_EXPORT for genearl drivers.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
See `components/drivers/include/drivers/watchdog.h`
maco definition of
RT_DEVICE_CTRL_WDT_GET_TIMEOUT
RT_DEVICE_CTRL_WDT_SET_TIMEOUT
RT_DEVICE_CTRL_WDT_GET_TIMELEFT
The wdt timeout time unit is defined as seconds in the API, but
the code incorrectly uses ms.
Correct this and comply with the API definition.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Yuanjie He <943313837@qq.com>
Reviewed-by: Shell <smokewood@qq.com>
Rewrote the spi driver.
Reuse the driver code from https://github.com/sophgo/cvi_alios_open,
which is Apache 2.0 licenced.
Signed-off-by: flyingcys <flyingcys@163.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
```
./bsp/cvitek/drivers/drv_wdt.c: In function '_wdt_control':
warning: assignment to 'void *' from 'unsigned int' makes pointer
from integer without a cast [-Wint-conversion]
119 | wdt_device->parent.user_data = (rt_uint32_t)(*(rt_uint32_t *)arg);
| ^
warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
122 | *(rt_uint32_t *)arg = (rt_uint32_t)wdt_device->parent.user_data;
| ^
```
Rootcasue: It's not portable to store integar in a pointer.
Solution: use global _wdt_dev to store the timeout value.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
The ADC controller needs to be calibrated during the initialization
phase, otherwise the measured voltage value will be inaccurate.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
In the new design, we require the user to manually enter the
PinName (as a string) in menuconfig instead of being given
menu items to select.
The original method will lead to too many menu item-related
macros being defined in the code, causing ifdef and other
codes scatter everywhere in the driver code, which is
inconvenient to maintain.
The new design adds a pinmux driver module to manage the
multiplexing of pins. This patch provides this driver module.
P.S., the reason why users are allowed to specify pinname
in a string instead of the pin number is mainly because
the technical manual provided by the SOC manufacturer
does not have numbers for some pins, only names.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Yuanjie He <943313837@qq.com>
Reviewed-by: Shell <smokewood@qq.com>
The contents of the SOC type part in the Kconfig configuration
are retained, and other parts related to I2C pin multiplexing
selection have been rolled back.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Yuanjie He <943313837@qq.com>
Reviewed-by: Shell <smokewood@qq.com>
* [bsp][hpmicro] add weak handle_trap implementation
- added weak handle_trap implementation
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
* [libcpu][risc-v][common] remove weak handle_trap function
- removed weak handle_trap function from trap_common.c
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
---------
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
The changes unify the tick.c implementations for all risc-v64
architectures, leveraging the CPUTIME feature. This refactoring was
necessary to streamline the codebase, and ensure consistent timer
handling across different platforms.
Changes:
- Updated `Kconfig` in `bsp/cvitek/cv18xx_risc-v` to fix formatting issues.
- Updated .config for BSPs to update `CPUTIME_TIMER_FREQ`
- Updated header of for API `riscv_cputime_init`
- Initialized riscv timer on `rt_hw_tick_init`
- Refactored `tick.c` and `tick.h` in `libcpu/risc-v/t-head/c906` and `libcpu/risc-v/virt64`:
- Replaced direct use of `rdtime` with `clock_cpu_gettime`.
- Removed redundant timer frequency definitions.
- Added static assertions to check the value of `CPUTIME_TIMER_FREQ`.
- Initialized `tick_cycles` based on `CPUTIME_TIMER_FREQ`.
- Integrated `ktime` support for tick initialization.
Signed-off-by: Shell <smokewood@qq.com>
Reviewed-on: https://github.com/RT-Thread/rt-thread/pull/9164
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
* [bsp/allwinner] feat: porting to RT_USING_DEVICE_OPS
This patch ports the codebase to use the RT_USING_DEVICE_OPS structure,
which is required by v5.1.0 Smart kernel, improves modularity and makes
it easier to manage device operations by consolidating them into a
single structure, enhancing maintainability and future scalability.
Changes:
- Added RT_USING_DEVICE_OPS conditionals to partition.c and drv_sdmmc.c.
- Defined rt_device_ops structures for partition and sdmmc drivers.
- Updated device initialization to use the ops structure if defined.
- Replaced direct function calls with rt_dev_control, rt_dev_read, and
rt_dev_write macros where applicable.
- Removed redundant us_delay function from os.c.
Signed-off-by: Shell <smokewood@qq.com>
* feat: update configuration
* feat: fixup compiler warning
---------
Signed-off-by: Shell <smokewood@qq.com>
* [libcpu] support for ARCH_REMAP_KERNEL
These changes introduce support for the ARCH_REMAP_KERNEL configuration,
which isolates kernel space in high virtual address regions. This feature
is necessary to enhance memory protection and management by segregating
user and kernel spaces more effectively.
Changes:
- Updated conditional macros to check for ARCH_REMAP_KERNEL instead of
ARCH_KERNEL_IN_HIGH_VA in board initialization files to reflect the new
configuration option.
- Modified qemu-virt64-riscv Kconfig and SConstruct files to include and
utilize ARCH_REMAP_KERNEL.
- Created a new linker script `link_smart.lds` for smart linking in qemu-virt64-riscv.
- Updated rtconfig.py to use a more flexible execution path setup.
- Enhanced user address space definitions in `lwp_arch.h` to support the
new virtual address mappings.
- Adjusted kernel memory initialization and mapping logic in `c906/mmu.c`
and `virt64/mmu.c` to account for high virtual address regions.
- Added Kconfig option to enable ARCH_REMAP_KERNEL for RISCV64 architectures.
- Enhanced memory setup functions to support new mapping scheme, including
updates to early page table setup and address relocation logic.
These modifications ensure that the system can utilize high memory
addresses for the kernel, improving memory isolation and system stability.
Signed-off-by: Shell <smokewood@qq.com>
* fixup: CI run failed
* bsp: default config without using smart
* fixup: static checks
* restore rt_hw_mmu_kernel_map_init for D1
---------
Signed-off-by: Shell <smokewood@qq.com>
- added new boards: hpm5300evk, hpm5301evklite and hpm6800evk
- upgaded hpm_sdk
- driver updates and bugfixes
- add hpmicro BSPs to CI
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
Z8MAN8
Bernard Xiong
heyuanjie87
Chen Wang
zhangyan
张衍
Rbb666
wdfk-prog
MuChenger
flyingcys
Shell
Fan Yang
heyuanjie87
LZerro
sakumisu
yuanzihao
Abner
andeyqi
2310863495@qq.com
Meco Man
Jisheng Zhang
yiyi
LTreeshu
zms123456
hengchuan.qi
Chasel
ShaquilleLiu
latercomer
QTbin
zhangyan
zhuzhuzhu
sp-cai
LaterComer
Fan YANG
Jiading Xu
WKJay
lzh