d3820ed77e
给vector模块添加构建脚本
2024-11-27 18:04:59 +08:00
af5ca55736
[libcpu]rv添加c908 cpu
2024-09-23 12:57:53 +08:00
29c0357ff8
[libcpu]优化rv构建脚本中选择vendor目录的判断条件
2024-09-18 22:00:35 -04:00
57d002b25e
feat: remove redundant codes under virt64, c906
...
Changes:
- create new folder name `common64` and save all common codes of rv64
inside
Signed-off-by: Shell <smokewood@qq.com>
2024-09-13 17:35:00 -04:00
c11f5bb251
add bl60x/bl70x/bl61x/bl808 ( #7063 )
...
Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
b9e4fcfc68
[libcpu][riscv]整合libcpu/riscv中的移植文件 提供一份公共代码于common ( #6941 )
...
整合libcpu/riscv中的移植文件 提供一份公共代码于common
在提交本pr时，除hpmicro的内核，rv32内核bsp已完成去除大部分的冗余，大部分代码采用common中的实现。本pr的作用是进一步统一common中的文件，从而提供一份公用代码，新移植的RV32内核的BSP可以全部使用common代码。
- 在common中提供一份公用文件：interrupt_gcc.S
- 修改原有的文件，将原有的中断中上下文切换代码替换为interrupt_gcc.S
- 基于上述修改，修改仓库中risc-v内核的BSP与移植相关的部分 (主要包含中断入口函数 中断栈等)
- 在common中提供一份公用文件：trap_common.c；提供统一中断入口函数，中断入口函数初始化，中断入口注册等函数，并完善异常时的信息输出
- 在common中提供一份公用文件：rt_hw_stack_frame.h；将栈帧结构体剥离，供用户使用
- 在上述工作完成后，在上述工作的基础上测试仓库中risc-v内核的BSP
- 完善函数中的命名，完善中断栈的获取
- 提供一份详细的基于现有common文件的移植指南
#### 在什么测试环境下测试通过
- 1.CH32V307V-R1-R0
- 2.CH32V208W-R0-1V4
- 3.HPM6750EVKMINI
- 4.GD32VF103V-EVAL
- 5.qemu(CORE-V-MCU )
> 与上述开发板使用同样芯片的BSP均测试通过
在CH32V307V-R1-R0与HPM6750EVKMINI上基于现有移植文件进行多线程复杂场景下的长时间测试，测试过程系统运行正常。
2023-03-01 01:32:43 -05:00
98a997c57e
[bsp]add new bsp-bl808 ( #6824 )
...
* add new bsp-bl808
* support ARCH_RISCV_FPU_S && update rtconfig.py
2023-01-07 02:03:21 -05:00
b99769f686
[libcpu][riscv]移除ch32中的冗余文件,使用common下的文件 ( #6813 )
...
* [libcpu][riscv]移除ch32中的冗余文件,使用common下的文件
* 修正cpuport.h宏定义
* 规范宏定义格式
2023-01-04 21:06:09 -05:00
f2a66e122f
[libcpu][riscv]移除cv32e40p中部分文件，采用common中的文件
2023-01-02 16:42:18 -05:00
b77241935c
[bsp][ch32v208]添加ch32v208BSP,合并libcpu/riscv 中ch系列的port文件 ( #6780 )
...
【1】添加ch32v208-r0 bsp
【2】合并libcpu/riscv 下ch系列mcu的port文件
2022-12-27 13:24:02 -05:00
9d8da76543
[bsp] add core-v-mcu bsp ( #6705 )
...
* add core-v-mcu bsp
* 规范bsp格式 添加readme
* 修改readme
Co-authored-by: 1516081466@qq.com <ws051000>
2022-12-08 15:01:37 -05:00
ecf2d82159
sync branch rt-smart. ( #6641 )
...
* Synchronize the code of the rt mart branch to the master branch.
* TTY device
* Add lwP code from rt-smart
* Add vnode in DFS, but DFS will be re-write for rt-smart
* There are three libcpu for rt-smart:
* arm/cortex-a, arm/aarch64
* riscv64
Co-authored-by: Rbb666 <zhangbingru@rt-thread.com>
Co-authored-by: zhkag <zhkag@foxmail.com>
2022-12-03 12:07:44 +08:00
c1b22ede30
Add BSP for HPM6750EVK and HPM6750EVKMINI ( #6374 )
...
* Add CANFD support and correct typos
- Added CANFD required fields to can.h
- Fixed typos in can.h and can.c
- Corrected all the projects affected by the typo
- Fixed wrong line-ending in some affected can driver files
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
* update
* bsp: support boards from hpmicro
- Supported HPM6750EVKMINI
- Supported HPM6750EVK
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
Co-authored-by: Meco Man <920369182@qq.com>
2022-09-06 00:48:16 -04:00
d887d6eb19
fix scons
2022-08-22 23:39:39 -04:00
c802fcdcf8
WCH CH569W-R0-1v0 evt board bsp port, first version ( #6167 )
...
WCH CH569W-R0-1v0 evt board bsp port, first version
dev/test under Ubuntu 20.04
toolchain from MounRiver_Studio_Community_Linux_x64_V120
tested drivers : SysTick, gpio, gpio interrupt, uart1 (RX interrupt, TX polling)
libcpu/risc-v/SConscript :
group includes rtconfig.CPU only if folder exists
libcpu/risc-v/common/cpuport.c/rt_hw_context_switch_interrupt() :
make it RT_WEAK for customization
2022-07-30 02:10:51 -04:00
99526cc047
[bsp/ch32v103r-evt] add ch32v103r-evt bsp
...
feat: move MRS demo source to bsp and libraries folder
feat: update Sconscript
feat: modify SConstruct in the bsp
feat: use the rtconfig.py of gd32vf103v-eval bsp to modify
feat: use the MRS's rtconfig.h temoporarily
feat: update Kconfig files
feat: use the MRS's .ld and rename as link.lds
feat: add ch32v1 porting folder
perf: remove board/system_ch32v10x.c
fix: define SOC_ARM_SERIES_CH32V103 in rtconfig.h
fix: add some neccessary macros in rtconfig.h
perf: use the menuconfig to generate rtconfig.h
feat: add readme.md
fix: correct the bad encode in main.c
fix: include board.h in main.c
perf: check and update README.md
perf: remove ch32f10x_port_cn.md
feat: ignore the standard libraries's CI checking
feat: add sdk_dist.py
fix: correct some style errors again
perf: simply the board/kconfig
fix: format ch32v103r-evt
fix: format drvs and libcpu
2022-04-06 11:06:55 +08:00
ce602a6e4a
[libcpu/risc-v] 修复risc-v scons编译中间文件不能输出到build/kernel/libcpu目录问题 ( #5736 )
2022-03-29 22:18:05 +08:00
236e01bead
support T-HEAD Xuantie-E9xx Series CPU on Smart-EVB, eg. E906/F/D/P, E907/F/D/P
2021-07-14 20:12:55 +08:00
5036816967
add qemu-riscv-virt64 bsp
...
add qemu-riscv-virt64 bsp
2021-05-18 09:57:25 +08:00
2f68120e49
[libcpu][risc-v] Fixed bsp k210 failing to compile | 修复 k210 无法编译的问题。
2020-10-29 10:54:53 +08:00
60287b69fd
add t-head smart-evb bsp, and risc-v cpu e906
2020-09-11 10:18:24 +08:00
ee4cabe69f
[BSP][Nuclei] Add Nuclei RISC-V Processor support
...
* Nuclei RISC-V Processor support is added both RV32 and RV64
* Nuclei RVSTAR BSP is added, UART driver is added
* MSH works well in RVSTAR board
---------------------------
Squashed commit of the following:
commit b7368bc2ed2c42a997f7915ad4c076fe43869c798fd31727bcb432308b207366173d748c2cd4745bfa8a2f24ea1be40bc50b4c8beb204bda2bcf5c560b932c677a0431f6f01f0e1f502edf1131f6e648ad81c1d3bfd780138a1a60320d34b1a042b806ef2a9603adcb34aaf6aeba3451466e9d
2020-04-17 21:07:29 +08:00
bd8f0d0423
[libcpu] Fix the build directory issue
2019-03-26 13:36:01 +00:00
bde47018b8
[libcpu] Add SConscript in libcpu.
2019-01-07 06:09:45 +08:00
heyuanjie87
heyuanjie87
Shell
flyingcys
Yaochenger
Yaochenger
guo
Fan Yang
liyangyang
emuzit
blta
blta
chenzx
lizhirui
tangweikang
chenzx
Huaqi Fang
BernardXiong