diff --git a/.github/workflows/bsp_buildings.yml b/.github/workflows/bsp_buildings.yml index 4a5f6d31f1..0ebdb051e3 100644 --- a/.github/workflows/bsp_buildings.yml +++ b/.github/workflows/bsp_buildings.yml @@ -151,6 +151,7 @@ jobs: - "stm32/stm32g070-st-nucleo" - "stm32/stm32g071-st-nucleo" - "stm32/stm32g431-st-nucleo" + - "stm32/stm32g491-st-nucleo" - "stm32/stm32g474-st-nucleo" - "stm32/stm32h563-st-nucleo" - "stm32/stm32h743-armfly-v7" diff --git a/.github/workflows/manual_trigger_scons_STM32_all.yml b/.github/workflows/manual_trigger_scons_STM32_all.yml index 2e9c4e9bed..6da83c7355 100644 --- a/.github/workflows/manual_trigger_scons_STM32_all.yml +++ b/.github/workflows/manual_trigger_scons_STM32_all.yml @@ -87,6 +87,7 @@ jobs: - {RTT_BSP_NAME: "stm32_stm32g070-st-nucleo", RTT_TOOL_CHAIN: "sourcery-arm", RTT_BSP: "stm32/stm32g070-st-nucleo"} - {RTT_BSP_NAME: "stm32_stm32g071-st-nucleo", RTT_TOOL_CHAIN: "sourcery-arm", RTT_BSP: "stm32/stm32g071-st-nucleo"} - {RTT_BSP_NAME: "stm32_stm32g431-st-nucleo", RTT_TOOL_CHAIN: "sourcery-arm", RTT_BSP: "stm32/stm32g431-st-nucleo"} + - {RTT_BSP_NAME: "stm32_stm32g491-st-nucleo", RTT_TOOL_CHAIN: "sourcery-arm", RTT_BSP: "stm32/stm32g491-st-nucleo"} - {RTT_BSP_NAME: "stm32_stm32g474-st-nucleo", RTT_TOOL_CHAIN: "sourcery-arm", RTT_BSP: "stm32/stm32g474-st-nucleo"} - {RTT_BSP_NAME: "stm32_stm32h743-armfly-v7", RTT_TOOL_CHAIN: "sourcery-arm", RTT_BSP: "stm32/stm32h743-armfly-v7"} - {RTT_BSP_NAME: "stm32_stm32h743-atk-apollo", RTT_TOOL_CHAIN: "sourcery-arm", RTT_BSP: "stm32/stm32h743-atk-apollo"} diff --git a/bsp/stm32/stm32g491-st-nucleo/.config b/bsp/stm32/stm32g491-st-nucleo/.config new file mode 100644 index 0000000000..62ef76374c --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/.config @@ -0,0 +1,1059 @@ +# +# Automatically generated file; DO NOT EDIT. +# RT-Thread Configuration +# + +# +# RT-Thread Kernel +# +CONFIG_RT_NAME_MAX=8 +# CONFIG_RT_USING_ARCH_DATA_TYPE is not set +# CONFIG_RT_USING_SMART is not set +# CONFIG_RT_USING_NANO is not set +# CONFIG_RT_USING_AMP is not set +# CONFIG_RT_USING_SMP is not set +CONFIG_RT_CPUS_NR=1 +CONFIG_RT_ALIGN_SIZE=8 +# CONFIG_RT_THREAD_PRIORITY_8 is not set +CONFIG_RT_THREAD_PRIORITY_32=y +# CONFIG_RT_THREAD_PRIORITY_256 is not set +CONFIG_RT_THREAD_PRIORITY_MAX=32 +CONFIG_RT_TICK_PER_SECOND=1000 +CONFIG_RT_USING_OVERFLOW_CHECK=y +CONFIG_RT_USING_HOOK=y +CONFIG_RT_HOOK_USING_FUNC_PTR=y +CONFIG_RT_USING_IDLE_HOOK=y +CONFIG_RT_IDLE_HOOK_LIST_SIZE=4 +CONFIG_IDLE_THREAD_STACK_SIZE=256 +# CONFIG_RT_USING_TIMER_SOFT is not set + +# +# kservice optimization +# +# CONFIG_RT_KSERVICE_USING_STDLIB is not set +# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set +# CONFIG_RT_USING_TINY_FFS is not set +# CONFIG_RT_KPRINTF_USING_LONGLONG is not set +CONFIG_RT_USING_DEBUG=y +CONFIG_RT_DEBUGING_COLOR=y +CONFIG_RT_DEBUGING_CONTEXT=y +# CONFIG_RT_DEBUGING_AUTO_INIT is not set + +# +# Inter-Thread communication +# +CONFIG_RT_USING_SEMAPHORE=y +CONFIG_RT_USING_MUTEX=y +CONFIG_RT_USING_EVENT=y +CONFIG_RT_USING_MAILBOX=y +CONFIG_RT_USING_MESSAGEQUEUE=y +# CONFIG_RT_USING_MESSAGEQUEUE_PRIORITY is not set +# CONFIG_RT_USING_SIGNALS is not set + +# +# Memory Management +# +CONFIG_RT_USING_MEMPOOL=y +CONFIG_RT_USING_SMALL_MEM=y +# CONFIG_RT_USING_SLAB is not set +# CONFIG_RT_USING_MEMHEAP is not set +CONFIG_RT_USING_SMALL_MEM_AS_HEAP=y +# CONFIG_RT_USING_MEMHEAP_AS_HEAP is not set +# CONFIG_RT_USING_SLAB_AS_HEAP is not set +# CONFIG_RT_USING_USERHEAP is not set +# CONFIG_RT_USING_NOHEAP is not set +# CONFIG_RT_USING_MEMTRACE is not set +# CONFIG_RT_USING_HEAP_ISR is not set +CONFIG_RT_USING_HEAP=y +CONFIG_RT_USING_DEVICE=y +# CONFIG_RT_USING_DEVICE_OPS is not set +# CONFIG_RT_USING_INTERRUPT_INFO is not set +CONFIG_RT_USING_CONSOLE=y +CONFIG_RT_CONSOLEBUF_SIZE=128 +CONFIG_RT_CONSOLE_DEVICE_NAME="lpuart1" +CONFIG_RT_VER_NUM=0x50100 +# CONFIG_RT_USING_STDC_ATOMIC is not set +CONFIG_RT_BACKTRACE_LEVEL_MAX_NR=32 +# CONFIG_RT_USING_CACHE is not set +CONFIG_RT_USING_HW_ATOMIC=y +# CONFIG_ARCH_ARM_BOOTWITH_FLUSH_CACHE is not set +# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set +CONFIG_RT_USING_CPU_FFS=y +CONFIG_ARCH_ARM=y +CONFIG_ARCH_ARM_CORTEX_M=y +CONFIG_ARCH_ARM_CORTEX_M4=y + +# +# RT-Thread Components +# +CONFIG_RT_USING_COMPONENTS_INIT=y +CONFIG_RT_USING_USER_MAIN=y +CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048 +CONFIG_RT_MAIN_THREAD_PRIORITY=10 +# CONFIG_RT_USING_LEGACY is not set +CONFIG_RT_USING_MSH=y +CONFIG_RT_USING_FINSH=y +CONFIG_FINSH_USING_MSH=y +CONFIG_FINSH_THREAD_NAME="tshell" +CONFIG_FINSH_THREAD_PRIORITY=20 +CONFIG_FINSH_THREAD_STACK_SIZE=4096 +CONFIG_FINSH_USING_HISTORY=y +CONFIG_FINSH_HISTORY_LINES=5 +CONFIG_FINSH_USING_SYMTAB=y +CONFIG_FINSH_CMD_SIZE=80 +CONFIG_MSH_USING_BUILT_IN_COMMANDS=y +CONFIG_FINSH_USING_DESCRIPTION=y +# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set +# CONFIG_FINSH_USING_AUTH is not set +CONFIG_FINSH_ARG_MAX=10 +CONFIG_FINSH_USING_OPTION_COMPLETION=y + +# +# DFS: device virtual file system +# +# CONFIG_RT_USING_DFS is not set +# CONFIG_RT_USING_FAL is not set + +# +# Device Drivers +# +# CONFIG_RT_USING_DM is not set +CONFIG_RT_USING_DEVICE_IPC=y +CONFIG_RT_UNAMED_PIPE_NUMBER=64 +# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set +CONFIG_RT_USING_SERIAL=y +CONFIG_RT_USING_SERIAL_V1=y +# CONFIG_RT_USING_SERIAL_V2 is not set +CONFIG_RT_SERIAL_USING_DMA=y +CONFIG_RT_SERIAL_RB_BUFSZ=64 +# CONFIG_RT_USING_CAN is not set +# CONFIG_RT_USING_HWTIMER is not set +# CONFIG_RT_USING_CPUTIME is not set +# CONFIG_RT_USING_I2C is not set +# CONFIG_RT_USING_PHY is not set +CONFIG_RT_USING_PIN=y +# CONFIG_RT_USING_ADC is not set +# CONFIG_RT_USING_DAC is not set +# CONFIG_RT_USING_NULL is not set +# CONFIG_RT_USING_ZERO is not set +# CONFIG_RT_USING_RANDOM is not set +# CONFIG_RT_USING_PWM is not set +# CONFIG_RT_USING_MTD_NOR is not set +# CONFIG_RT_USING_MTD_NAND is not set +# CONFIG_RT_USING_PM is not set +# CONFIG_RT_USING_RTC is not set +# CONFIG_RT_USING_SDIO is not set +# CONFIG_RT_USING_SPI is not set +# CONFIG_RT_USING_WDT is not set +# CONFIG_RT_USING_AUDIO is not set +# CONFIG_RT_USING_SENSOR is not set +# CONFIG_RT_USING_TOUCH is not set +# CONFIG_RT_USING_LCD is not set +# CONFIG_RT_USING_HWCRYPTO is not set +# CONFIG_RT_USING_PULSE_ENCODER is not set +# CONFIG_RT_USING_INPUT_CAPTURE is not set +# CONFIG_RT_USING_DEV_BUS is not set +# CONFIG_RT_USING_WIFI is not set +# CONFIG_RT_USING_VIRTIO is not set +# CONFIG_RT_USING_KTIME is not set + +# +# Using USB +# +# CONFIG_RT_USING_USB is not set +# CONFIG_RT_USING_USB_HOST is not set +# CONFIG_RT_USING_USB_DEVICE is not set + +# +# C/C++ and POSIX layer +# + +# +# ISO-ANSI C layer +# + +# +# Timezone and Daylight Saving Time +# +# CONFIG_RT_LIBC_USING_FULL_TZ_DST is not set +CONFIG_RT_LIBC_USING_LIGHT_TZ_DST=y +CONFIG_RT_LIBC_TZ_DEFAULT_HOUR=8 +CONFIG_RT_LIBC_TZ_DEFAULT_MIN=0 +CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0 + +# +# POSIX (Portable Operating System Interface) layer +# +# CONFIG_RT_USING_POSIX_FS is not set +# CONFIG_RT_USING_POSIX_DELAY is not set +# CONFIG_RT_USING_POSIX_CLOCK is not set +# CONFIG_RT_USING_POSIX_TIMER is not set +# CONFIG_RT_USING_PTHREADS is not set +# CONFIG_RT_USING_MODULE is not set + +# +# Interprocess Communication (IPC) +# +# CONFIG_RT_USING_POSIX_PIPE is not set +# CONFIG_RT_USING_POSIX_MESSAGE_QUEUE is not set +# CONFIG_RT_USING_POSIX_MESSAGE_SEMAPHORE is not set + +# +# Socket is in the 'Network' category +# +# CONFIG_RT_USING_CPLUSPLUS is not set + +# +# Network +# +# CONFIG_RT_USING_SAL is not set +# CONFIG_RT_USING_NETDEV is not set +# CONFIG_RT_USING_LWIP is not set +# CONFIG_RT_USING_AT is not set + +# +# Memory protection +# +# CONFIG_RT_USING_MEM_PROTECTION is not set +# CONFIG_RT_USING_HW_STACK_GUARD is not set + +# +# Utilities +# +# CONFIG_RT_USING_RYM is not set +# CONFIG_RT_USING_ULOG is not set +# CONFIG_RT_USING_UTEST is not set +# CONFIG_RT_USING_VAR_EXPORT is not set +# CONFIG_RT_USING_RESOURCE_ID is not set +# CONFIG_RT_USING_ADT is not set +# CONFIG_RT_USING_RT_LINK is not set +# CONFIG_RT_USING_VBUS is not set + +# +# RT-Thread Utestcases +# +# CONFIG_RT_USING_UTESTCASES is not set + +# +# RT-Thread online packages +# + +# +# IoT - internet of things +# +# CONFIG_PKG_USING_LWIP is not set +# CONFIG_PKG_USING_LORAWAN_DRIVER is not set +# CONFIG_PKG_USING_PAHOMQTT is not set +# CONFIG_PKG_USING_UMQTT is not set +# CONFIG_PKG_USING_WEBCLIENT is not set +# CONFIG_PKG_USING_WEBNET is not set +# CONFIG_PKG_USING_MONGOOSE is not set +# CONFIG_PKG_USING_MYMQTT is not set +# CONFIG_PKG_USING_KAWAII_MQTT is not set +# CONFIG_PKG_USING_BC28_MQTT is not set +# CONFIG_PKG_USING_WEBTERMINAL is not set +# CONFIG_PKG_USING_FREEMODBUS is not set +# CONFIG_PKG_USING_NANOPB is not set + +# +# Wi-Fi +# + +# +# Marvell WiFi +# +# CONFIG_PKG_USING_WLANMARVELL is not set + +# +# Wiced WiFi +# +# CONFIG_PKG_USING_WLAN_WICED is not set +# CONFIG_PKG_USING_RW007 is not set + +# +# CYW43012 WiFi +# +# CONFIG_PKG_USING_WLAN_CYW43012 is not set + +# +# BL808 WiFi +# +# CONFIG_PKG_USING_WLAN_BL808 is not set + +# +# CYW43439 WiFi +# +# CONFIG_PKG_USING_WLAN_CYW43439 is not set +# CONFIG_PKG_USING_COAP is not set +# CONFIG_PKG_USING_NOPOLL is not set +# CONFIG_PKG_USING_NETUTILS is not set +# CONFIG_PKG_USING_CMUX is not set +# CONFIG_PKG_USING_PPP_DEVICE is not set +# CONFIG_PKG_USING_AT_DEVICE is not set +# CONFIG_PKG_USING_ATSRV_SOCKET is not set +# CONFIG_PKG_USING_WIZNET is not set +# CONFIG_PKG_USING_ZB_COORDINATOR is not set + +# +# IoT Cloud +# +# CONFIG_PKG_USING_ONENET is not set +# CONFIG_PKG_USING_GAGENT_CLOUD is not set +# CONFIG_PKG_USING_ALI_IOTKIT is not set +# CONFIG_PKG_USING_AZURE is not set +# CONFIG_PKG_USING_TENCENT_IOT_EXPLORER is not set +# CONFIG_PKG_USING_JIOT-C-SDK is not set +# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set +# CONFIG_PKG_USING_JOYLINK is not set +# CONFIG_PKG_USING_IOTSHARP_SDK is not set +# CONFIG_PKG_USING_NIMBLE is not set +# CONFIG_PKG_USING_LLSYNC_SDK_ADAPTER is not set +# CONFIG_PKG_USING_OTA_DOWNLOADER is not set +# CONFIG_PKG_USING_IPMSG is not set +# CONFIG_PKG_USING_LSSDP is not set +# CONFIG_PKG_USING_AIRKISS_OPEN is not set +# CONFIG_PKG_USING_LIBRWS is not set +# CONFIG_PKG_USING_TCPSERVER is not set +# CONFIG_PKG_USING_PROTOBUF_C is not set +# CONFIG_PKG_USING_DLT645 is not set +# CONFIG_PKG_USING_QXWZ is not set +# CONFIG_PKG_USING_SMTP_CLIENT is not set +# CONFIG_PKG_USING_ABUP_FOTA is not set +# CONFIG_PKG_USING_LIBCURL2RTT is not set +# CONFIG_PKG_USING_CAPNP is not set +# CONFIG_PKG_USING_AGILE_TELNET is not set +# CONFIG_PKG_USING_NMEALIB is not set +# CONFIG_PKG_USING_PDULIB is not set +# CONFIG_PKG_USING_BTSTACK is not set +# CONFIG_PKG_USING_BT_CYW43012 is not set +# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set +# CONFIG_PKG_USING_WAYZ_IOTKIT is not set +# CONFIG_PKG_USING_MAVLINK is not set +# CONFIG_PKG_USING_BSAL is not set +# CONFIG_PKG_USING_AGILE_MODBUS is not set +# CONFIG_PKG_USING_AGILE_FTP is not set +# CONFIG_PKG_USING_EMBEDDEDPROTO is not set +# CONFIG_PKG_USING_RT_LINK_HW is not set +# CONFIG_PKG_USING_RYANMQTT is not set +# CONFIG_PKG_USING_RYANW5500 is not set +# CONFIG_PKG_USING_LORA_PKT_FWD is not set +# CONFIG_PKG_USING_LORA_GW_DRIVER_LIB is not set +# CONFIG_PKG_USING_LORA_PKT_SNIFFER is not set +# CONFIG_PKG_USING_HM is not set +# CONFIG_PKG_USING_SMALL_MODBUS is not set +# CONFIG_PKG_USING_NET_SERVER is not set +# CONFIG_PKG_USING_ZFTP is not set +# CONFIG_PKG_USING_WOL is not set +# CONFIG_PKG_USING_ZEPHYR_POLLING is not set +# CONFIG_PKG_USING_MATTER_ADAPTATION_LAYER is not set +# CONFIG_PKG_USING_LHC_MODBUS is not set + +# +# security packages +# +# CONFIG_PKG_USING_MBEDTLS is not set +# CONFIG_PKG_USING_LIBSODIUM is not set +# CONFIG_PKG_USING_LIBHYDROGEN is not set +# CONFIG_PKG_USING_TINYCRYPT is not set +# CONFIG_PKG_USING_TFM is not set +# CONFIG_PKG_USING_YD_CRYPTO is not set + +# +# language packages +# + +# +# JSON: JavaScript Object Notation, a lightweight data-interchange format +# +# CONFIG_PKG_USING_CJSON is not set +# CONFIG_PKG_USING_LJSON is not set +# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set +# CONFIG_PKG_USING_RAPIDJSON is not set +# CONFIG_PKG_USING_JSMN is not set +# CONFIG_PKG_USING_AGILE_JSMN is not set +# CONFIG_PKG_USING_PARSON is not set + +# +# XML: Extensible Markup Language +# +# CONFIG_PKG_USING_SIMPLE_XML is not set +# CONFIG_PKG_USING_EZXML is not set +# CONFIG_PKG_USING_LUATOS_SOC is not set +# CONFIG_PKG_USING_LUA is not set +# CONFIG_PKG_USING_JERRYSCRIPT is not set +# CONFIG_PKG_USING_MICROPYTHON is not set +# CONFIG_PKG_USING_PIKASCRIPT is not set +# CONFIG_PKG_USING_RTT_RUST is not set + +# +# multimedia packages +# + +# +# LVGL: powerful and easy-to-use embedded GUI library +# +# CONFIG_PKG_USING_LVGL is not set +# CONFIG_PKG_USING_LV_MUSIC_DEMO is not set +# CONFIG_PKG_USING_GUI_GUIDER_DEMO is not set + +# +# u8g2: a monochrome graphic library +# +# CONFIG_PKG_USING_U8G2_OFFICIAL is not set +# CONFIG_PKG_USING_U8G2 is not set +# CONFIG_PKG_USING_OPENMV is not set +# CONFIG_PKG_USING_MUPDF is not set +# CONFIG_PKG_USING_STEMWIN is not set +# CONFIG_PKG_USING_WAVPLAYER is not set +# CONFIG_PKG_USING_TJPGD is not set +# CONFIG_PKG_USING_PDFGEN is not set +# CONFIG_PKG_USING_HELIX is not set +# CONFIG_PKG_USING_AZUREGUIX is not set +# CONFIG_PKG_USING_TOUCHGFX2RTT is not set +# CONFIG_PKG_USING_NUEMWIN is not set +# CONFIG_PKG_USING_MP3PLAYER is not set +# CONFIG_PKG_USING_TINYJPEG is not set +# CONFIG_PKG_USING_UGUI is not set +# CONFIG_PKG_USING_MCURSES is not set +# CONFIG_PKG_USING_TERMBOX is not set +# CONFIG_PKG_USING_VT100 is not set +# CONFIG_PKG_USING_QRCODE is not set +# CONFIG_PKG_USING_GUIENGINE is not set +# CONFIG_PKG_USING_PERSIMMON is not set +# CONFIG_PKG_USING_3GPP_AMRNB is not set + +# +# tools packages +# +# CONFIG_PKG_USING_CMBACKTRACE is not set +# CONFIG_PKG_USING_EASYFLASH is not set +# CONFIG_PKG_USING_EASYLOGGER is not set +# CONFIG_PKG_USING_SYSTEMVIEW is not set +# CONFIG_PKG_USING_SEGGER_RTT is not set +# CONFIG_PKG_USING_RTT_AUTO_EXE_CMD is not set +# CONFIG_PKG_USING_RDB is not set +# CONFIG_PKG_USING_ULOG_EASYFLASH is not set +# CONFIG_PKG_USING_LOGMGR is not set +# CONFIG_PKG_USING_ADBD is not set +# CONFIG_PKG_USING_COREMARK is not set +# CONFIG_PKG_USING_DHRYSTONE is not set +# CONFIG_PKG_USING_MEMORYPERF is not set +# CONFIG_PKG_USING_NR_MICRO_SHELL is not set +# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set +# CONFIG_PKG_USING_LUNAR_CALENDAR is not set +# CONFIG_PKG_USING_BS8116A is not set +# CONFIG_PKG_USING_GPS_RMC is not set +# CONFIG_PKG_USING_URLENCODE is not set +# CONFIG_PKG_USING_UMCN is not set +# CONFIG_PKG_USING_LWRB2RTT is not set +# CONFIG_PKG_USING_CPU_USAGE is not set +# CONFIG_PKG_USING_GBK2UTF8 is not set +# CONFIG_PKG_USING_VCONSOLE is not set +# CONFIG_PKG_USING_KDB is not set +# CONFIG_PKG_USING_WAMR is not set +# CONFIG_PKG_USING_MICRO_XRCE_DDS_CLIENT is not set +# CONFIG_PKG_USING_LWLOG is not set +# CONFIG_PKG_USING_ANV_TRACE is not set +# CONFIG_PKG_USING_ANV_MEMLEAK is not set +# CONFIG_PKG_USING_ANV_TESTSUIT is not set +# CONFIG_PKG_USING_ANV_BENCH is not set +# CONFIG_PKG_USING_DEVMEM is not set +# CONFIG_PKG_USING_REGEX is not set +# CONFIG_PKG_USING_MEM_SANDBOX is not set +# CONFIG_PKG_USING_SOLAR_TERMS is not set +# CONFIG_PKG_USING_GAN_ZHI is not set +# CONFIG_PKG_USING_FDT is not set +# CONFIG_PKG_USING_CBOX is not set +# CONFIG_PKG_USING_SNOWFLAKE is not set +# CONFIG_PKG_USING_HASH_MATCH is not set +# CONFIG_PKG_USING_ARMV7M_DWT_TOOL is not set +# CONFIG_PKG_USING_VOFA_PLUS is not set +# CONFIG_PKG_USING_RT_TRACE is not set +# CONFIG_PKG_USING_ZDEBUG is not set + +# +# system packages +# + +# +# enhanced kernel services +# +# CONFIG_PKG_USING_RT_MEMCPY_CM is not set +# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set +# CONFIG_PKG_USING_RT_VSNPRINTF_FULL is not set + +# +# acceleration: Assembly language or algorithmic acceleration packages +# +# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set +# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set +# CONFIG_PKG_USING_QFPLIB_M3 is not set + +# +# CMSIS: ARM Cortex-M Microcontroller Software Interface Standard +# +# CONFIG_PKG_USING_CMSIS_5 is not set +# CONFIG_PKG_USING_CMSIS_RTOS1 is not set +# CONFIG_PKG_USING_CMSIS_RTOS2 is not set + +# +# Micrium: Micrium software products porting for RT-Thread +# +# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set +# CONFIG_PKG_USING_UCOSII_WRAPPER is not set +# CONFIG_PKG_USING_UC_CRC is not set +# CONFIG_PKG_USING_UC_CLK is not set +# CONFIG_PKG_USING_UC_COMMON is not set +# CONFIG_PKG_USING_UC_MODBUS is not set +# CONFIG_PKG_USING_FREERTOS_WRAPPER is not set +# CONFIG_PKG_USING_LITEOS_SDK is not set +# CONFIG_PKG_USING_TZ_DATABASE is not set +# CONFIG_PKG_USING_CAIRO is not set +# CONFIG_PKG_USING_PIXMAN is not set +# CONFIG_PKG_USING_PARTITION is not set +# CONFIG_PKG_USING_PERF_COUNTER is not set +# CONFIG_PKG_USING_FLASHDB is not set +# CONFIG_PKG_USING_SQLITE is not set +# CONFIG_PKG_USING_RTI is not set +# CONFIG_PKG_USING_DFS_YAFFS is not set +# CONFIG_PKG_USING_LITTLEFS is not set +# CONFIG_PKG_USING_DFS_JFFS2 is not set +# CONFIG_PKG_USING_DFS_UFFS is not set +# CONFIG_PKG_USING_LWEXT4 is not set +# CONFIG_PKG_USING_THREAD_POOL is not set +# CONFIG_PKG_USING_ROBOTS is not set +# CONFIG_PKG_USING_EV is not set +# CONFIG_PKG_USING_SYSWATCH is not set +# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set +# CONFIG_PKG_USING_PLCCORE is not set +# CONFIG_PKG_USING_RAMDISK is not set +# CONFIG_PKG_USING_MININI is not set +# CONFIG_PKG_USING_QBOOT is not set +# CONFIG_PKG_USING_PPOOL is not set +# CONFIG_PKG_USING_OPENAMP is not set +# CONFIG_PKG_USING_RPMSG_LITE is not set +# CONFIG_PKG_USING_LPM is not set +# CONFIG_PKG_USING_TLSF is not set +# CONFIG_PKG_USING_EVENT_RECORDER is not set +# CONFIG_PKG_USING_ARM_2D is not set +# CONFIG_PKG_USING_MCUBOOT is not set +# CONFIG_PKG_USING_TINYUSB is not set +# CONFIG_PKG_USING_CHERRYUSB is not set +# CONFIG_PKG_USING_KMULTI_RTIMER is not set +# CONFIG_PKG_USING_TFDB is not set +# CONFIG_PKG_USING_QPC is not set +# CONFIG_PKG_USING_AGILE_UPGRADE is not set +# CONFIG_PKG_USING_FLASH_BLOB is not set +# CONFIG_PKG_USING_MLIBC is not set +# CONFIG_PKG_USING_TASK_MSG_BUS is not set +# CONFIG_PKG_USING_SFDB is not set +# CONFIG_PKG_USING_RTP is not set +# CONFIG_PKG_USING_REB is not set +# CONFIG_PKG_USING_R_RHEALSTONE is not set + +# +# peripheral libraries and drivers +# + +# +# sensors drivers +# +# CONFIG_PKG_USING_LSM6DSM is not set +# CONFIG_PKG_USING_LSM6DSL is not set +# CONFIG_PKG_USING_LPS22HB is not set +# CONFIG_PKG_USING_HTS221 is not set +# CONFIG_PKG_USING_LSM303AGR is not set +# CONFIG_PKG_USING_BME280 is not set +# CONFIG_PKG_USING_BME680 is not set +# CONFIG_PKG_USING_BMA400 is not set +# CONFIG_PKG_USING_BMI160_BMX160 is not set +# CONFIG_PKG_USING_SPL0601 is not set +# CONFIG_PKG_USING_MS5805 is not set +# CONFIG_PKG_USING_DA270 is not set +# CONFIG_PKG_USING_DF220 is not set +# CONFIG_PKG_USING_HSHCAL001 is not set +# CONFIG_PKG_USING_BH1750 is not set +# CONFIG_PKG_USING_MPU6XXX is not set +# CONFIG_PKG_USING_AHT10 is not set +# CONFIG_PKG_USING_AP3216C is not set +# CONFIG_PKG_USING_TSL4531 is not set +# CONFIG_PKG_USING_DS18B20 is not set +# CONFIG_PKG_USING_DHT11 is not set +# CONFIG_PKG_USING_DHTXX is not set +# CONFIG_PKG_USING_GY271 is not set +# CONFIG_PKG_USING_GP2Y10 is not set +# CONFIG_PKG_USING_SGP30 is not set +# CONFIG_PKG_USING_HDC1000 is not set +# CONFIG_PKG_USING_BMP180 is not set +# CONFIG_PKG_USING_BMP280 is not set +# CONFIG_PKG_USING_SHTC1 is not set +# CONFIG_PKG_USING_BMI088 is not set +# CONFIG_PKG_USING_HMC5883 is not set +# CONFIG_PKG_USING_MAX6675 is not set +# CONFIG_PKG_USING_TMP1075 is not set +# CONFIG_PKG_USING_SR04 is not set +# CONFIG_PKG_USING_CCS811 is not set +# CONFIG_PKG_USING_PMSXX is not set +# CONFIG_PKG_USING_RT3020 is not set +# CONFIG_PKG_USING_MLX90632 is not set +# CONFIG_PKG_USING_MLX90393 is not set +# CONFIG_PKG_USING_MLX90392 is not set +# CONFIG_PKG_USING_MLX90397 is not set +# CONFIG_PKG_USING_MS5611 is not set +# CONFIG_PKG_USING_MAX31865 is not set +# CONFIG_PKG_USING_VL53L0X is not set +# CONFIG_PKG_USING_INA260 is not set +# CONFIG_PKG_USING_MAX30102 is not set +# CONFIG_PKG_USING_INA226 is not set +# CONFIG_PKG_USING_LIS2DH12 is not set +# CONFIG_PKG_USING_HS300X is not set +# CONFIG_PKG_USING_ZMOD4410 is not set +# CONFIG_PKG_USING_ISL29035 is not set +# CONFIG_PKG_USING_MMC3680KJ is not set +# CONFIG_PKG_USING_QMP6989 is not set +# CONFIG_PKG_USING_BALANCE is not set +# CONFIG_PKG_USING_SHT2X is not set +# CONFIG_PKG_USING_SHT3X is not set +# CONFIG_PKG_USING_SHT4X is not set +# CONFIG_PKG_USING_AD7746 is not set +# CONFIG_PKG_USING_ADT74XX is not set +# CONFIG_PKG_USING_MAX17048 is not set +# CONFIG_PKG_USING_AS7341 is not set +# CONFIG_PKG_USING_CW2015 is not set +# CONFIG_PKG_USING_ICM20608 is not set +# CONFIG_PKG_USING_PAJ7620 is not set +# CONFIG_PKG_USING_STHS34PF80 is not set + +# +# touch drivers +# +# CONFIG_PKG_USING_GT9147 is not set +# CONFIG_PKG_USING_GT1151 is not set +# CONFIG_PKG_USING_GT917S is not set +# CONFIG_PKG_USING_GT911 is not set +# CONFIG_PKG_USING_FT6206 is not set +# CONFIG_PKG_USING_FT5426 is not set +# CONFIG_PKG_USING_FT6236 is not set +# CONFIG_PKG_USING_XPT2046_TOUCH is not set +# CONFIG_PKG_USING_CST816X is not set +# CONFIG_PKG_USING_REALTEK_AMEBA is not set +# CONFIG_PKG_USING_STM32_SDIO is not set +# CONFIG_PKG_USING_ESP_IDF is not set +# CONFIG_PKG_USING_BUTTON is not set +# CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_SX12XX is not set +# CONFIG_PKG_USING_SIGNAL_LED is not set +# CONFIG_PKG_USING_LEDBLINK is not set +# CONFIG_PKG_USING_LITTLED is not set +# CONFIG_PKG_USING_LKDGUI is not set +# CONFIG_PKG_USING_NRF5X_SDK is not set +# CONFIG_PKG_USING_NRFX is not set + +# +# Kendryte SDK +# +# CONFIG_PKG_USING_K210_SDK is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set +# CONFIG_PKG_USING_INFRARED is not set +# CONFIG_PKG_USING_MULTI_INFRARED is not set +# CONFIG_PKG_USING_AGILE_BUTTON is not set +# CONFIG_PKG_USING_AGILE_LED is not set +# CONFIG_PKG_USING_AT24CXX is not set +# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set +# CONFIG_PKG_USING_PCA9685 is not set +# CONFIG_PKG_USING_ILI9341 is not set +# CONFIG_PKG_USING_I2C_TOOLS is not set +# CONFIG_PKG_USING_NRF24L01 is not set +# CONFIG_PKG_USING_RPLIDAR is not set +# CONFIG_PKG_USING_AS608 is not set +# CONFIG_PKG_USING_RC522 is not set +# CONFIG_PKG_USING_WS2812B is not set +# CONFIG_PKG_USING_EMBARC_BSP is not set +# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set +# CONFIG_PKG_USING_MULTI_RTIMER is not set +# CONFIG_PKG_USING_MAX7219 is not set +# CONFIG_PKG_USING_BEEP is not set +# CONFIG_PKG_USING_EASYBLINK is not set +# CONFIG_PKG_USING_PMS_SERIES is not set +# CONFIG_PKG_USING_CAN_YMODEM is not set +# CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set +# CONFIG_PKG_USING_QLED is not set +# CONFIG_PKG_USING_AGILE_CONSOLE is not set +# CONFIG_PKG_USING_LD3320 is not set +# CONFIG_PKG_USING_WK2124 is not set +# CONFIG_PKG_USING_LY68L6400 is not set +# CONFIG_PKG_USING_DM9051 is not set +# CONFIG_PKG_USING_SSD1306 is not set +# CONFIG_PKG_USING_QKEY is not set +# CONFIG_PKG_USING_RS485 is not set +# CONFIG_PKG_USING_RS232 is not set +# CONFIG_PKG_USING_NES is not set +# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set +# CONFIG_PKG_USING_VDEVICE is not set +# CONFIG_PKG_USING_SGM706 is not set +# CONFIG_PKG_USING_STM32WB55_SDK is not set +# CONFIG_PKG_USING_RDA58XX is not set +# CONFIG_PKG_USING_LIBNFC is not set +# CONFIG_PKG_USING_MFOC is not set +# CONFIG_PKG_USING_TMC51XX is not set +# CONFIG_PKG_USING_TCA9534 is not set +# CONFIG_PKG_USING_KOBUKI is not set +# CONFIG_PKG_USING_ROSSERIAL is not set +# CONFIG_PKG_USING_MICRO_ROS is not set +# CONFIG_PKG_USING_MCP23008 is not set +# CONFIG_PKG_USING_BLUETRUM_SDK is not set +# CONFIG_PKG_USING_MISAKA_AT24CXX is not set +# CONFIG_PKG_USING_MISAKA_RGB_BLING is not set +# CONFIG_PKG_USING_LORA_MODEM_DRIVER is not set +# CONFIG_PKG_USING_SOFT_SERIAL is not set +# CONFIG_PKG_USING_MB85RS16 is not set +# CONFIG_PKG_USING_RFM300 is not set +# CONFIG_PKG_USING_IO_INPUT_FILTER is not set +# CONFIG_PKG_USING_RASPBERRYPI_PICO_SDK is not set +# CONFIG_PKG_USING_LRF_NV7LIDAR is not set +# CONFIG_PKG_USING_AIP650 is not set +# CONFIG_PKG_USING_FINGERPRINT is not set +# CONFIG_PKG_USING_BT_ECB02C is not set +# CONFIG_PKG_USING_UAT is not set +# CONFIG_PKG_USING_ST7789 is not set +# CONFIG_PKG_USING_VS1003 is not set +# CONFIG_PKG_USING_X9555 is not set +# CONFIG_PKG_USING_SYSTEM_RUN_LED is not set +# CONFIG_PKG_USING_SPI_TOOLS is not set + +# +# AI packages +# +# CONFIG_PKG_USING_LIBANN is not set +# CONFIG_PKG_USING_NNOM is not set +# CONFIG_PKG_USING_ONNX_BACKEND is not set +# CONFIG_PKG_USING_ONNX_PARSER is not set +# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set +# CONFIG_PKG_USING_ELAPACK is not set +# CONFIG_PKG_USING_ULAPACK is not set +# CONFIG_PKG_USING_QUEST is not set +# CONFIG_PKG_USING_NAXOS is not set +# CONFIG_PKG_USING_R_TINYMAIX is not set + +# +# Signal Processing and Control Algorithm Packages +# +# CONFIG_PKG_USING_FIRE_PID_CURVE is not set +# CONFIG_PKG_USING_QPID is not set +# CONFIG_PKG_USING_UKAL is not set +# CONFIG_PKG_USING_DIGITALCTRL is not set +# CONFIG_PKG_USING_KISSFFT is not set +# CONFIG_PKG_USING_CMSIS_DSP is not set + +# +# miscellaneous packages +# + +# +# project laboratory +# + +# +# samples: kernel and components samples +# +# CONFIG_PKG_USING_KERNEL_SAMPLES is not set +# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set +# CONFIG_PKG_USING_NETWORK_SAMPLES is not set +# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set + +# +# entertainment: terminal games and other interesting software packages +# +# CONFIG_PKG_USING_CMATRIX is not set +# CONFIG_PKG_USING_SL is not set +# CONFIG_PKG_USING_CAL is not set +# CONFIG_PKG_USING_ACLOCK is not set +# CONFIG_PKG_USING_THREES is not set +# CONFIG_PKG_USING_2048 is not set +# CONFIG_PKG_USING_SNAKE is not set +# CONFIG_PKG_USING_TETRIS is not set +# CONFIG_PKG_USING_DONUT is not set +# CONFIG_PKG_USING_COWSAY is not set +# CONFIG_PKG_USING_MORSE is not set +# CONFIG_PKG_USING_TINYSQUARE is not set +# CONFIG_PKG_USING_LIBCSV is not set +# CONFIG_PKG_USING_OPTPARSE is not set +# CONFIG_PKG_USING_FASTLZ is not set +# CONFIG_PKG_USING_MINILZO is not set +# CONFIG_PKG_USING_QUICKLZ is not set +# CONFIG_PKG_USING_LZMA is not set +# CONFIG_PKG_USING_RALARAM is not set +# CONFIG_PKG_USING_MULTIBUTTON is not set +# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set +# CONFIG_PKG_USING_CANFESTIVAL is not set +# CONFIG_PKG_USING_ZLIB is not set +# CONFIG_PKG_USING_MINIZIP is not set +# CONFIG_PKG_USING_HEATSHRINK is not set +# CONFIG_PKG_USING_DSTR is not set +# CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set +# CONFIG_PKG_USING_UPACKER is not set +# CONFIG_PKG_USING_UPARAM is not set +# CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set +# CONFIG_PKG_USING_KI is not set +# CONFIG_PKG_USING_ARMv7M_DWT is not set +# CONFIG_PKG_USING_CRCLIB is not set +# CONFIG_PKG_USING_LWGPS is not set +# CONFIG_PKG_USING_STATE_MACHINE is not set +# CONFIG_PKG_USING_DESIGN_PATTERN is not set +# CONFIG_PKG_USING_CONTROLLER is not set +# CONFIG_PKG_USING_PHASE_LOCKED_LOOP is not set +# CONFIG_PKG_USING_MFBD is not set +# CONFIG_PKG_USING_SLCAN2RTT is not set +# CONFIG_PKG_USING_SOEM is not set +# CONFIG_PKG_USING_QPARAM is not set +# CONFIG_PKG_USING_CorevMCU_CLI is not set +# CONFIG_PKG_USING_GET_IRQ_PRIORITY is not set + +# +# Arduino libraries +# +# CONFIG_PKG_USING_RTDUINO is not set + +# +# Projects and Demos +# +# CONFIG_PKG_USING_ARDUINO_MSGQ_C_CPP_DEMO is not set +# CONFIG_PKG_USING_ARDUINO_ULTRASOUND_RADAR is not set +# CONFIG_PKG_USING_ARDUINO_SENSOR_KIT is not set +# CONFIG_PKG_USING_ARDUINO_MATLAB_SUPPORT is not set + +# +# Sensors +# +# CONFIG_PKG_USING_ARDUINO_SENSOR_DEVICE_DRIVERS is not set +# CONFIG_PKG_USING_ARDUINO_CAPACITIVESENSOR is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL375 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL53L0X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL53L1X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSOR is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL6180X is not set +# CONFIG_PKG_USING_ADAFRUIT_MAX31855 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31865 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31856 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX6675 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90614 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM9DS1 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AHTX0 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM9DS0 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP280 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADT7410 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP085 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BME680 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP9808 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP4728 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_INA219 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LTR390 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL345 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DHT is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP9600 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM6DS is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO055 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX1704X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MMC56X3 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90393 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90395 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ICM20X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DPS310 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTS221 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHT4X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHT31 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL343 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BME280 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AS726X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AMG88XX is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AM2320 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AM2315 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LTR329_LTR303 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP085_UNIFIED is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP183 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP183_UNIFIED is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP3XX is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MS8607 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS3MDL is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90640 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MMA8451 is not set +# CONFIG_PKG_USING_ADAFRUIT_MSA301 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPL115A2 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO08X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO08X_RVC is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS2MDL is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM303DLH_MAG is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LC709203F is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_CAP1188 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_CCS811 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_NAU7802 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS331 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LPS2X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LPS35HW is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM303_ACCEL is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS3DH is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCF8591 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPL3115A2 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPR121 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPRLS is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPU6050 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCT2075 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PM25AQI is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_EMC2101 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_FXAS21002C is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SCD30 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_FXOS8700 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HMC5883_UNIFIED is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SGP30 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP006 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TLA202X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TCS34725 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI7021 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI1145 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SGP40 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHTC3 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HDC1000 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTU21DF is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AS7341 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTU31D is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSORLAB is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_INA260 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP007_LIBRARY is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_L3GD20 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP117 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSC2007 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSL2561 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSL2591_LIBRARY is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VCNL4040 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML6070 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML6075 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML7700 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_LIS3DHTR is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_DHT is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_ADXL335 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_ADXL345 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_BME280 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_BMP280 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_H3LIS331DL is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_MMA7660 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_TSL2561 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_PAJ7620 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_VL53L0X is not set +# CONFIG_PKG_USING_SEEED_ITG3200 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_SHT31 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_HP20X is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_DRV2605L is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_BBM150 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_HMC5883L is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_LSM303DLH is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_TCS3414CS is not set +# CONFIG_PKG_USING_SEEED_MP503 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_BMP085 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_HIGHTEMP is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_VEML6070 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_SI1145 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_SHT35 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_AT42QT1070 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_LSM6DS3 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_HDC1000 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_HM3301 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_MCP9600 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_LTC2941 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_LDC1612 is not set + +# +# Display +# +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_GFX_LIBRARY is not set +# CONFIG_PKG_USING_ARDUINO_U8G2 is not set +# CONFIG_PKG_USING_ARDUINO_TFT_ESPI is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ST7735 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SSD1306 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ILI9341 is not set +# CONFIG_PKG_USING_SEEED_TM1637 is not set + +# +# Timing +# +# CONFIG_PKG_USING_ARDUINO_RTCLIB is not set +# CONFIG_PKG_USING_ARDUINO_MSTIMER2 is not set +# CONFIG_PKG_USING_ARDUINO_TICKER is not set +# CONFIG_PKG_USING_ARDUINO_TASKSCHEDULER is not set + +# +# Data Processing +# +# CONFIG_PKG_USING_ARDUINO_KALMANFILTER is not set +# CONFIG_PKG_USING_ARDUINO_ARDUINOJSON is not set + +# +# Data Storage +# + +# +# Communication +# +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PN532 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI4713 is not set + +# +# Device Control +# +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCF8574 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCA9685 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_PCF85063TP is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TPA2016 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DRV2605 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DS1841 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DS3502 is not set + +# +# Other +# +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MFRC630 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI5351 is not set + +# +# Signal IO +# +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BUSIO is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TCA8418 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP23017 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADS1X15 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AW9523 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP3008 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP4725 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BD3491FS is not set + +# +# Uncategorized +# +CONFIG_SOC_FAMILY_STM32=y +CONFIG_SOC_SERIES_STM32G4=y + +# +# Hardware Drivers Config +# +CONFIG_SOC_STM32G491RE=y + +# +# Onboard Peripheral Drivers +# + +# +# On-chip Peripheral Drivers +# +CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y +CONFIG_BSP_USING_LPUART1=y +# CONFIG_BSP_LPUART1_RX_USING_DMA is not set +# CONFIG_BSP_USING_UART1 is not set +# CONFIG_BSP_USING_UART3 is not set +# CONFIG_BSP_USING_UART4 is not set +# CONFIG_BSP_USING_UDID is not set + +# +# Board extended module Drivers +# diff --git a/bsp/stm32/stm32g491-st-nucleo/.gitignore b/bsp/stm32/stm32g491-st-nucleo/.gitignore new file mode 100644 index 0000000000..7221bde019 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/.gitignore @@ -0,0 +1,42 @@ +*.pyc +*.map +*.dblite +*.elf +*.bin +*.hex +*.axf +*.exe +*.pdb +*.idb +*.ilk +*.old +build +Debug +documentation/html +packages/ +*~ +*.o +*.obj +*.out +*.bak +*.dep +*.lib +*.i +*.d +.DS_Stor* +.config 3 +.config 4 +.config 5 +Midea-X1 +*.uimg +GPATH +GRTAGS +GTAGS +.vscode +JLinkLog.txt +JLinkSettings.ini +DebugConfig/ +RTE/ +settings/ +*.uvguix* +cconfig.h diff --git a/bsp/stm32/stm32g491-st-nucleo/Kconfig b/bsp/stm32/stm32g491-st-nucleo/Kconfig new file mode 100644 index 0000000000..362bdfbed8 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/Kconfig @@ -0,0 +1,24 @@ +mainmenu "RT-Thread Configuration" + +config BSP_DIR + string + option env="BSP_ROOT" + default "." + +config RTT_DIR + string + option env="RTT_ROOT" + default "../../.." + +config PKGS_DIR + string + option env="PKGS_ROOT" + default "packages" + +source "$RTT_DIR/Kconfig" +source "$PKGS_DIR/Kconfig" +source "../libraries/Kconfig" + +if !RT_USING_NANO +source "board/Kconfig" +endif diff --git a/bsp/stm32/stm32g491-st-nucleo/README.md b/bsp/stm32/stm32g491-st-nucleo/README.md new file mode 100644 index 0000000000..b9f144212b --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/README.md @@ -0,0 +1,108 @@ +# STM32G491-Nucleo BSP Introduction + +[中文](README_zh.md) + +## MCU: STM32G491RE @170MHz, 128KB FLASH, 32KB RAM + +The STM32G491x6/x8/xB devices are based on the high-performance Arm® Cortex®-M4 32-bit RISC core. They operate at a frequency of up to 170 MHz. + +The Cortex-M4 core features a single-precision floating-point unit (FPU), which supports all the Arm single-precision data-processing instructions and all the data types. It also implements a full set of DSP (digital signal processing) instructions and a memory protection unit (MPU) which enhances the application’s security. +These devices embed high-speed memories (128 Kbytes of Flash memory, and 32 Kbytes of SRAM), an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix. +The devices also embed several protection mechanisms for embedded Flash memory and SRAM: readout protection, write protection, securable memory area and proprietary code readout protection. +The devices embed peripherals allowing mathematical/arithmetic function acceleration (CORDIC for trigonometric functions and FMAC unit for filter functions). +They offer two fast 12-bit ADCs (5 Msps), four comparators, three operational amplifiers, four DAC channels (2 external and 2 internal), an internal voltage reference buffer, a low-power RTC, one general-purpose 32-bit timers, two 16-bit PWM timers dedicated to motor control, seven general-purpose 16-bit timers, and one 16-bit low-power timer. +They also feature standard and advanced communication interfaces such as: +\- Three I2Cs +\- Three SPIs multiplexed with two half duplex I2Ss +\- Three USARTs, one UART and one low-power UART. +\- One FDCAN +\- One SAI +\- USB device +\- UCPD +The devices operate in the -40 to +85 °C (+105 °C junction) and -40 to +125 °C (+130 °C junction) temperature ranges from a 1.71 to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low-power applications. +Some independent power supplies are supported including an analog independent supply input for ADC, DAC, OPAMPs and comparators. A VBAT input allows backup of the RTC and the registers. +The STM32G491x6/x8/xB family offers 9 packages from 32-pin to 100-pin. + +#### KEY FEATURES + +- Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait-state execution from Flash memory, frequency up to 170 MHz with 213 DMIPS, MPU, DSP instructions +- Operating conditions: + - VDD, VDDA voltage range: 1.71 V to 3.6 V +- Mathematical hardware accelerators + - CORDIC for trigonometric functions acceleration + - FMAC: filter mathematical accelerator +- Memories + - 128 Kbytes of Flash memory with ECC support, proprietary code readout protection (PCROP), securable memory area, 1 Kbyte OTP + - 22 Kbytes of SRAM, with hardware parity check implemented on the first 16 Kbytes + - Routine booster: 10 Kbytes of SRAM on instruction and data bus, with hardware parity check (CCM SRAM) +- Reset and supply management + - Power-on/power-down reset (POR/PDR/BOR) + - Programmable voltage detector (PVD) + - Low-power modes: sleep, stop, standby and shutdown + - VBAT supply for RTC and backup registers +- Clock management + - 4 to 48 MHz crystal oscillator + - 32 kHz oscillator with calibration + - Internal 16 MHz RC with PLL option (± 1%) + - Internal 32 kHz RC oscillator (± 5%) +- Up to 86 fast I/Os + - All mappable on external interrupt vectors + - Several I/Os with 5 V tolerant capability +- Interconnect matrix +- 12-channel DMA controller +- 2 x ADCs 0.25 µs (up to 23 channels). Resolution up to 16-bit with hardware oversampling, 0 to 3.6 V conversion range + +- 4 x 12-bit DAC channels + - 2 x buffered external channels 1 MSPS + - 2 x unbuffered internal channels 15 MSPS +- 4 x ultra-fast rail-to-rail analog comparators +- 3 x operational amplifiers that can be used in PGA mode, all terminals accessible +- Internal voltage reference buffer (VREFBUF) supporting three output voltages (2.048 V, 2.5 V, 2.9 V) +- 14 timers: + - 1 x 32-bit timer and 2 x 16-bit timers with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input + - 2 x 16-bit 8-channel advanced motor control timers, with up to 8 x PWM channels, dead time generation and emergency stop + - 1 x 16-bit timer with 2 x IC/OCs, one OCN/PWM, dead time generation and emergency stop + - 2 x 16-bit timers with IC/OC/OCN/PWM, dead time generation and emergency stop + - 2 x watchdog timers (independent, window) + - 1 x SysTick timer: 24-bit downcounter + - 2 x 16-bit basic timers + - 1 x low-power timer +- Calendar RTC with alarm, periodic wakeup from stop/standby +- Communication interfaces + - 1 x FDCAN controller supporting flexible data rate + - 3 x I2C Fast mode plus (1 Mbit/s) with 20 mA current sink, SMBus/PMBus, wakeup from stop + - 4 x USART/UARTs (ISO 7816 interface, LIN, IrDA, modem control) + - 1 x LPUART + - 3 x SPIs, 4 to 16 programmable bit frames, 2 x with multiplexed half duplex I2S interface + - 1 x SAI (serial audio interface) + - USB 2.0 full-speed interface with LPM and BCD support + - IRTIM (infrared interface) + - USB Type-C™ /USB power delivery controller (UCPD) +- True random number generator (RNG) +- CRC calculation unit, 96-bit unique ID +- Development support: serial wire debug (SWD), JTAG, Embedded Trace Macrocell™ + + + +## Read more + +| Documents | Description | +| :----------------------------------------------------------: | :----------------------------------------------------------: | +| [STM32_Nucleo-64_BSP_Introduction](../docs/STM32_Nucleo-64_BSP_Introduction.md) | How to run RT-Thread on STM32 Nucleo-64 boards (**Must-Read**) | +| [STM32G491RE ST Official Website](https://www.st.com/en/microcontrollers-microprocessors/stm32G491RE.html#documentation) | STM32G491RE datasheet and other resources | + + + +## Maintained By + +[supperthomas](https://github.com/supperthomas), <78900636@qq.com> + + + +## Translated By + +Meco Man @ RT-Thread Community + +> jiantingman@foxmail.com +> +> https://github.com/mysterywolf \ No newline at end of file diff --git a/bsp/stm32/stm32g491-st-nucleo/README_zh.md b/bsp/stm32/stm32g491-st-nucleo/README_zh.md new file mode 100644 index 0000000000..095661be52 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/README_zh.md @@ -0,0 +1,106 @@ +# NUCLEO-G491RE 开发板 BSP 说明 + +## 简介 + +本文档为 NUCLEO-G491RE 开发板的 BSP (板级支持包) 说明。 + +主要内容如下： + +- 开发板资源介绍 +- BSP 快速上手 +- 进阶使用方法 + +通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。 + +## 开发板介绍 + +NUCLEO-G491RE 是 ST 公司推出的一款针对 STM32G4 系列设计的 Cortex-M4 Nucleo-64 开发板，支持 mbed，兼容 Arduino、还带有 ST Morpho 扩展接口，可连接微控制器的所有周边外设。 + +开发板外观如下图所示： + +![board](figures/board.jpg) + +该开发板常用 **板载资源** 如下： + +- MCU：STM32G491RE，主频 170MHz，512KB FLASH ，112KB RAM +- 常用外设 + - LED：1个，LD2（黄色，PA5） +- 常用接口：USB 转串口 +- 调试接口，标准 ST-LINK/SWD + +开发板更多详细信息请参考【NUCLEO-G491RE】 [开发板介绍](https://www.st.com/zh/evaluation-tools/nucleo-g491re.html)。 + +## 外设支持 + +本 BSP 目前对外设的支持情况如下： + +| **板载外设** | **支持情况** | **备注** | +| :----------------- | :----------: | :------------------------------------- | +| USB 转串口 | 支持 | | +| **片上外设** | **支持情况** | **备注** | +| GPIO | 支持 | | +| UART | 支持 | LPUART1 USART1/3 UART4 | + +## 使用说明 + +使用说明分为如下两个章节： + +- 快速上手 + + 本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。 + +- 进阶使用 + + 本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。 + + +### 快速上手 + +本 BSP 为开发者提供 MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5.36 开发环境为例，介绍如何将系统运行起来。 + +#### 硬件连接 + +使用数据线连接开发板到 PC，通过数据线对开发板供电,下载,调试。 + +#### 编译下载 + +双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。 + +> 工程默认配置使用 ST-LINK 仿真器下载程序，在通过 ST-LINK 连接开发板的基础上，点击下载按钮即可下载程序到开发板 + +#### 运行结果 + +下载程序成功之后，系统会自动运行，黄色的 LD2 以 500MS 周期闪烁。 + +连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息: + +```bash + \ | / +- RT - Thread Operating System + / | \ 4.0.2 build Oct 5 2019 + 2006 - 2019 Copyright by rt-thread team +msh > +``` +### 进阶使用 + +此 BSP 默认只开启了 GPIO 和 LPUART1 的功能，如果需使用更多高级功能，需要利用 ENV 工具对 BSP 进行配置，步骤如下： + +1. 在 bsp 下打开 env 工具。 + +2. 输入`menuconfig`命令配置工程，配置好之后保存退出。 + +3. 输入`pkgs --update`命令更新软件包。 + +4. 输入`scons --target=mdk4/mdk5/iar` 命令重新生成工程。 + +本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。 + +## 注意事项 + +- 默认终端输出设备是 LPUART1 + +## 联系人信息 + +维护人: + +- [supperthomas](https://github.com/supperthomas), 邮箱：<78900636@qq.com> \ No newline at end of file diff --git a/bsp/stm32/stm32g491-st-nucleo/SConscript b/bsp/stm32/stm32g491-st-nucleo/SConscript new file mode 100644 index 0000000000..20f7689c53 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/SConscript @@ -0,0 +1,15 @@ +# for module compiling +import os +Import('RTT_ROOT') +from building import * + +cwd = GetCurrentDir() +objs = [] +list = os.listdir(cwd) + +for d in list: + path = os.path.join(cwd, d) + if os.path.isfile(os.path.join(path, 'SConscript')): + objs = objs + SConscript(os.path.join(d, 'SConscript')) + +Return('objs') diff --git a/bsp/stm32/stm32g491-st-nucleo/SConstruct b/bsp/stm32/stm32g491-st-nucleo/SConstruct new file mode 100644 index 0000000000..98b47d0529 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/SConstruct @@ -0,0 +1,59 @@ +import os +import sys +import rtconfig + +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') +else: + RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..') + +sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')] +try: + from building import * +except: + print('Cannot found RT-Thread root directory, please check RTT_ROOT') + print(RTT_ROOT) + exit(-1) + +TARGET = 'rt-thread.' + rtconfig.TARGET_EXT + +DefaultEnvironment(tools=[]) +env = Environment(tools = ['mingw'], + AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS, + CC = rtconfig.CC, CFLAGS = rtconfig.CFLAGS, + AR = rtconfig.AR, ARFLAGS = '-rc', + CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS, + LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS) +env.PrependENVPath('PATH', rtconfig.EXEC_PATH) + +if rtconfig.PLATFORM in ['iccarm']: + env.Replace(CCCOM = ['$CC $CFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES']) + env.Replace(ARFLAGS = ['']) + env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map') + +Export('RTT_ROOT') +Export('rtconfig') + +SDK_ROOT = os.path.abspath('./') + +if os.path.exists(SDK_ROOT + '/libraries'): + libraries_path_prefix = SDK_ROOT + '/libraries' +else: + libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries' + +SDK_LIB = libraries_path_prefix +Export('SDK_LIB') + +# prepare building environment +objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False) + +stm32_library = 'STM32G4xx_HAL' +rtconfig.BSP_LIBRARY_TYPE = stm32_library + +# include libraries +objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript'), variant_dir='build/libraries/'+stm32_library, duplicate=0)) +# include drivers +objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript'),variant_dir='build/libraries/'+'HAL_Drivers', duplicate=0)) + +# make a building +DoBuilding(TARGET, objs) diff --git a/bsp/stm32/stm32g491-st-nucleo/applications/SConscript b/bsp/stm32/stm32g491-st-nucleo/applications/SConscript new file mode 100644 index 0000000000..9bb9abae89 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/applications/SConscript @@ -0,0 +1,15 @@ +from building import * +import os + +cwd = GetCurrentDir() +src = Glob('*.c') +CPPPATH = [cwd] + +group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH) + +list = os.listdir(cwd) +for item in list: + if os.path.isfile(os.path.join(cwd, item, 'SConscript')): + group = group + SConscript(os.path.join(item, 'SConscript')) + +Return('group') diff --git a/bsp/stm32/stm32g491-st-nucleo/applications/main.c b/bsp/stm32/stm32g491-st-nucleo/applications/main.c new file mode 100644 index 0000000000..b797e8bc3d --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/applications/main.c @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2023-2024, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2023-12-04 Supperthomas first version + */ + +#include +#include +#include + +/* defined the LED2 pin: PA5 */ +#define LED2_PIN GET_PIN(A, 5) + +int main(void) +{ + /* set LED2 pin mode to output */ + rt_pin_mode(LED2_PIN, PIN_MODE_OUTPUT); + + while (1) + { + rt_pin_write(LED2_PIN, PIN_HIGH); + rt_thread_mdelay(500); + rt_pin_write(LED2_PIN, PIN_LOW); + rt_thread_mdelay(500); + } +} diff --git a/bsp/stm32/stm32g491-st-nucleo/board/.ignore_format.yml b/bsp/stm32/stm32g491-st-nucleo/board/.ignore_format.yml new file mode 100644 index 0000000000..0d7f3e360c --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/.ignore_format.yml @@ -0,0 +1,6 @@ +# files format check exclude path, please follow the instructions below to modify; +# If you need to exclude an entire folder, add the folder path in dir_path; +# If you need to exclude a file, add the path to the file in file_path. + +dir_path: +- CubeMX_Config diff --git a/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/.mxproject b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/.mxproject new file mode 100644 index 0000000000..377c225978 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/.mxproject @@ -0,0 +1,25 @@ +[PreviousLibFiles] +LibFiles=Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_uart.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_usart.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_lpuart.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_uart_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_def.h;Drivers\STM32G4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_rcc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_rcc_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_bus.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_rcc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_system.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_utils.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_crs.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash_ramfunc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_gpio.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_gpio_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_gpio.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_exti.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_exti.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_dma.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_dma_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_dma.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_dmamux.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_pwr.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_pwr_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_pwr.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_cortex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_cortex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_tim.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_tim_ex.h;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_uart.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_uart_ex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc_ex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ramfunc.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_gpio.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_exti.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma_ex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr_ex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cortex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim_ex.c;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_uart.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_usart.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_lpuart.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_uart_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_def.h;Drivers\STM32G4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_rcc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_rcc_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_bus.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_rcc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_system.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_utils.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_crs.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash_ramfunc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_gpio.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_gpio_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_gpio.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_exti.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_exti.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_dma.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_dma_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_dma.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_dmamux.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_pwr.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_pwr_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_pwr.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_cortex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_cortex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_tim.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_tim_ex.h;Drivers\CMSIS\Device\ST\STM32G4xx\Include\stm32g491xx.h;Drivers\CMSIS\Device\ST\STM32G4xx\Include\stm32g4xx.h;Drivers\CMSIS\Device\ST\STM32G4xx\Include\system_stm32g4xx.h;Drivers\CMSIS\Device\ST\STM32G4xx\Source\Templates\system_stm32g4xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; + +[PreviousUsedKeilFiles] +SourceFiles=..\Core\Src\main.c;..\Core\Src\stm32g4xx_it.c;..\Core\Src\stm32g4xx_hal_msp.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_uart.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_uart_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ramfunc.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_gpio.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_exti.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cortex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim_ex.c;..\Drivers\CMSIS\Device\ST\STM32G4xx\Source\Templates\system_stm32g4xx.c;..\Core\Src\system_stm32g4xx.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_uart.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_uart_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ramfunc.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_gpio.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_exti.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cortex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim_ex.c;..\Drivers\CMSIS\Device\ST\STM32G4xx\Source\Templates\system_stm32g4xx.c;..\Core\Src\system_stm32g4xx.c;;; +HeaderPath=..\Drivers\STM32G4xx_HAL_Driver\Inc;..\Drivers\STM32G4xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32G4xx\Include;..\Drivers\CMSIS\Include;..\Core\Inc; +CDefines=USE_HAL_DRIVER;STM32G491xx;USE_HAL_DRIVER;USE_HAL_DRIVER; + +[PreviousGenFiles] +AdvancedFolderStructure=true +HeaderFileListSize=3 +HeaderFiles#0=..\Core\Inc\stm32g4xx_it.h +HeaderFiles#1=..\Core\Inc\stm32g4xx_hal_conf.h +HeaderFiles#2=..\Core\Inc\main.h +HeaderFolderListSize=1 +HeaderPath#0=..\Core\Inc +HeaderFiles=; +SourceFileListSize=3 +SourceFiles#0=..\Core\Src\stm32g4xx_it.c +SourceFiles#1=..\Core\Src\stm32g4xx_hal_msp.c +SourceFiles#2=..\Core\Src\main.c +SourceFolderListSize=1 +SourcePath#0=..\Core\Src +SourceFiles=; + diff --git a/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Inc/main.h b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Inc/main.h new file mode 100644 index 0000000000..9d3a3972a5 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Inc/main.h @@ -0,0 +1,84 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g4xx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +#define B1_Pin GPIO_PIN_13 +#define B1_GPIO_Port GPIOC +#define B1_EXTI_IRQn EXTI15_10_IRQn +#define LPUART1_TX_Pin GPIO_PIN_2 +#define LPUART1_TX_GPIO_Port GPIOA +#define LPUART1_RX_Pin GPIO_PIN_3 +#define LPUART1_RX_GPIO_Port GPIOA +#define LD2_Pin GPIO_PIN_5 +#define LD2_GPIO_Port GPIOA +#define T_SWDIO_Pin GPIO_PIN_13 +#define T_SWDIO_GPIO_Port GPIOA +#define T_SWCLK_Pin GPIO_PIN_14 +#define T_SWCLK_GPIO_Port GPIOA +#define T_SWO_Pin GPIO_PIN_3 +#define T_SWO_GPIO_Port GPIOB + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ diff --git a/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Inc/stm32g4xx_hal_conf.h b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Inc/stm32g4xx_hal_conf.h new file mode 100644 index 0000000000..25fc721f91 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Inc/stm32g4xx_hal_conf.h @@ -0,0 +1,380 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32g4xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file + ****************************************************************************** + * @attention + * + * Copyright (c) 2019 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G4xx_HAL_CONF_H +#define STM32G4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ + +#define HAL_MODULE_ENABLED + + /*#define HAL_ADC_MODULE_ENABLED */ +/*#define HAL_COMP_MODULE_ENABLED */ +/*#define HAL_CORDIC_MODULE_ENABLED */ +/*#define HAL_CRC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_DAC_MODULE_ENABLED */ +/*#define HAL_FDCAN_MODULE_ENABLED */ +/*#define HAL_FMAC_MODULE_ENABLED */ +/*#define HAL_HRTIM_MODULE_ENABLED */ +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_IWDG_MODULE_ENABLED */ +/*#define HAL_I2C_MODULE_ENABLED */ +/*#define HAL_I2S_MODULE_ENABLED */ +/*#define HAL_LPTIM_MODULE_ENABLED */ +/*#define HAL_NAND_MODULE_ENABLED */ +/*#define HAL_NOR_MODULE_ENABLED */ +/*#define HAL_OPAMP_MODULE_ENABLED */ +/*#define HAL_PCD_MODULE_ENABLED */ +/*#define HAL_QSPI_MODULE_ENABLED */ +/*#define HAL_RNG_MODULE_ENABLED */ +/*#define HAL_RTC_MODULE_ENABLED */ +/*#define HAL_SAI_MODULE_ENABLED */ +/*#define HAL_SMARTCARD_MODULE_ENABLED */ +/*#define HAL_SMBUS_MODULE_ENABLED */ +/*#define HAL_SPI_MODULE_ENABLED */ +/*#define HAL_SRAM_MODULE_ENABLED */ +/*#define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/*#define HAL_USART_MODULE_ENABLED */ +/*#define HAL_WWDG_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## Register Callbacks selection ############################## */ +/** + * @brief This is the list of modules where register callback can be used + */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U +#define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U +#define USE_HAL_EXTI_REGISTER_CALLBACKS 0U +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U +#define USE_HAL_FMAC_REGISTER_CALLBACKS 0U +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U +#define USE_HAL_UART_REGISTER_CALLBACKS 0U +#define USE_HAL_USART_REGISTER_CALLBACKS 0U +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE (24000000UL) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI48) value for USB FS and RNG. + * This internal oscillator is mainly dedicated to provide a high precision clock to + * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. + * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency + * which is subject to manufacturing process variations. + */ +#if !defined (HSI48_VALUE) + #define HSI48_VALUE (48000000UL) /*!< Value of the Internal High Speed oscillator for USB FS/RNG in Hz. + The real value my vary depending on manufacturing process variations.*/ +#endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) +/*!< Value of the Internal Low Speed oscillator in Hz +The real value may vary depending on the variations in voltage and temperature.*/ +#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) +#define LSE_VALUE (32768UL) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S and SAI peripherals + * This value is used by the I2S and SAI HAL modules to compute the I2S and SAI clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) +#define EXTERNAL_CLOCK_VALUE (12288000UL) /*!< Value of the External oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ + +#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (0UL) /*!< tick interrupt priority (lowest by default) */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 0U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ + +#define USE_SPI_CRC 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED +#include "stm32g4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32g4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED +#include "stm32g4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED +#include "stm32g4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED +#include "stm32g4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED +#include "stm32g4xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CORDIC_MODULE_ENABLED +#include "stm32g4xx_hal_cordic.h" +#endif /* HAL_CORDIC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED +#include "stm32g4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED +#include "stm32g4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED +#include "stm32g4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED +#include "stm32g4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED +#include "stm32g4xx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED +#include "stm32g4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_FMAC_MODULE_ENABLED +#include "stm32g4xx_hal_fmac.h" +#endif /* HAL_FMAC_MODULE_ENABLED */ + +#ifdef HAL_HRTIM_MODULE_ENABLED +#include "stm32g4xx_hal_hrtim.h" +#endif /* HAL_HRTIM_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED +#include "stm32g4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED +#include "stm32g4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED +#include "stm32g4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED +#include "stm32g4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32g4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED +#include "stm32g4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED +#include "stm32g4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED +#include "stm32g4xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED +#include "stm32g4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED +#include "stm32g4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED +#include "stm32g4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED +#include "stm32g4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED +#include "stm32g4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED +#include "stm32g4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED +#include "stm32g4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED +#include "stm32g4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED +#include "stm32g4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED +#include "stm32g4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED +#include "stm32g4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED +#include "stm32g4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED +#include "stm32g4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED +#include "stm32g4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G4xx_HAL_CONF_H */ diff --git a/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Inc/stm32g4xx_it.h b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Inc/stm32g4xx_it.h new file mode 100644 index 0000000000..34d7e8ff7b --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Inc/stm32g4xx_it.h @@ -0,0 +1,67 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32g4xx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32G4xx_IT_H +#define __STM32G4xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +void EXTI15_10_IRQHandler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32G4xx_IT_H */ diff --git a/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Src/main.c b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Src/main.c new file mode 100644 index 0000000000..8e5114efec --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Src/main.c @@ -0,0 +1,274 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.c + * @brief : Main program body + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN PTD */ + +/* USER CODE END PTD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +UART_HandleTypeDef hlpuart1; + +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +void SystemClock_Config(void); +static void MX_GPIO_Init(void); +static void MX_LPUART1_UART_Init(void); +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + /* USER CODE BEGIN 1 */ + + /* USER CODE END 1 */ + + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); + + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + MX_LPUART1_UART_Init(); + /* USER CODE BEGIN 2 */ + + /* USER CODE END 2 */ + + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + /* USER CODE END WHILE */ + + /* USER CODE BEGIN 3 */ + } + /* USER CODE END 3 */ +} + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + + /** Configure the main internal regulator output voltage + */ + HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST); + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV4; + RCC_OscInitStruct.PLL.PLLN = 85; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; + RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) + { + Error_Handler(); + } +} + +/** + * @brief LPUART1 Initialization Function + * @param None + * @retval None + */ +static void MX_LPUART1_UART_Init(void) +{ + + /* USER CODE BEGIN LPUART1_Init 0 */ + + /* USER CODE END LPUART1_Init 0 */ + + /* USER CODE BEGIN LPUART1_Init 1 */ + + /* USER CODE END LPUART1_Init 1 */ + hlpuart1.Instance = LPUART1; + hlpuart1.Init.BaudRate = 115200; + hlpuart1.Init.WordLength = UART_WORDLENGTH_8B; + hlpuart1.Init.StopBits = UART_STOPBITS_1; + hlpuart1.Init.Parity = UART_PARITY_NONE; + hlpuart1.Init.Mode = UART_MODE_TX_RX; + hlpuart1.Init.HwFlowCtl = UART_HWCONTROL_NONE; + hlpuart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + hlpuart1.Init.ClockPrescaler = UART_PRESCALER_DIV1; + hlpuart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + if (HAL_UART_Init(&hlpuart1) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetTxFifoThreshold(&hlpuart1, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetRxFifoThreshold(&hlpuart1, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_DisableFifoMode(&hlpuart1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN LPUART1_Init 2 */ + + /* USER CODE END LPUART1_Init 2 */ + +} + +/** + * @brief GPIO Initialization Function + * @param None + * @retval None + */ +static void MX_GPIO_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; +/* USER CODE BEGIN MX_GPIO_Init_1 */ +/* USER CODE END MX_GPIO_Init_1 */ + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOF_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(LD2_GPIO_Port, LD2_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pin : B1_Pin */ + GPIO_InitStruct.Pin = B1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(B1_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pin : LD2_Pin */ + GPIO_InitStruct.Pin = LD2_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(LD2_GPIO_Port, &GPIO_InitStruct); + + /* EXTI interrupt init*/ + HAL_NVIC_SetPriority(EXTI15_10_IRQn, 0, 0); + HAL_NVIC_EnableIRQ(EXTI15_10_IRQn); + +/* USER CODE BEGIN MX_GPIO_Init_2 */ +/* USER CODE END MX_GPIO_Init_2 */ +} + +/* USER CODE BEGIN 4 */ + +/* USER CODE END 4 */ + +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + __disable_irq(); + while (1) + { + } + /* USER CODE END Error_Handler_Debug */ +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ diff --git a/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Src/stm32g4xx_hal_msp.c b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Src/stm32g4xx_hal_msp.c new file mode 100644 index 0000000000..47648bc270 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Src/stm32g4xx_hal_msp.c @@ -0,0 +1,162 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32g4xx_hal_msp.c + * @brief This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + + /* System interrupt init*/ + + /** Disable the internal Pull-Up in Dead Battery pins of UCPD peripheral + */ + HAL_PWREx_DisableUCPDDeadBattery(); + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +/** +* @brief UART MSP Initialization +* This function configures the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + if(huart->Instance==LPUART1) + { + /* USER CODE BEGIN LPUART1_MspInit 0 */ + + /* USER CODE END LPUART1_MspInit 0 */ + + /** Initializes the peripherals clocks + */ + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPUART1; + PeriphClkInit.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_PCLK1; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + // Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_LPUART1_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**LPUART1 GPIO Configuration + PA2 ------> LPUART1_TX + PA3 ------> LPUART1_RX + */ + GPIO_InitStruct.Pin = LPUART1_TX_Pin|LPUART1_RX_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF12_LPUART1; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN LPUART1_MspInit 1 */ + + /* USER CODE END LPUART1_MspInit 1 */ + } + +} + +/** +* @brief UART MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + if(huart->Instance==LPUART1) + { + /* USER CODE BEGIN LPUART1_MspDeInit 0 */ + + /* USER CODE END LPUART1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_LPUART1_CLK_DISABLE(); + + /**LPUART1 GPIO Configuration + PA2 ------> LPUART1_TX + PA3 ------> LPUART1_RX + */ + HAL_GPIO_DeInit(GPIOA, LPUART1_TX_Pin|LPUART1_RX_Pin); + + /* USER CODE BEGIN LPUART1_MspDeInit 1 */ + + /* USER CODE END LPUART1_MspDeInit 1 */ + } + +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Src/stm32g4xx_it.c b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Src/stm32g4xx_it.c new file mode 100644 index 0000000000..e8c54ee51b --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Src/stm32g4xx_it.c @@ -0,0 +1,217 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32g4xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32g4xx_it.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ + +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex-M4 Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) + { + } + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Memory management fault. + */ +void MemManage_Handler(void) +{ + /* USER CODE BEGIN MemoryManagement_IRQn 0 */ + + /* USER CODE END MemoryManagement_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ + /* USER CODE END W1_MemoryManagement_IRQn 0 */ + } +} + +/** + * @brief This function handles Prefetch fault, memory access fault. + */ +void BusFault_Handler(void) +{ + /* USER CODE BEGIN BusFault_IRQn 0 */ + + /* USER CODE END BusFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_BusFault_IRQn 0 */ + /* USER CODE END W1_BusFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Undefined instruction or illegal state. + */ +void UsageFault_Handler(void) +{ + /* USER CODE BEGIN UsageFault_IRQn 0 */ + + /* USER CODE END UsageFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ + /* USER CODE END W1_UsageFault_IRQn 0 */ + } +} + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + /* USER CODE BEGIN SVCall_IRQn 0 */ + + /* USER CODE END SVCall_IRQn 0 */ + /* USER CODE BEGIN SVCall_IRQn 1 */ + + /* USER CODE END SVCall_IRQn 1 */ +} + +/** + * @brief This function handles Debug monitor. + */ +void DebugMon_Handler(void) +{ + /* USER CODE BEGIN DebugMonitor_IRQn 0 */ + + /* USER CODE END DebugMonitor_IRQn 0 */ + /* USER CODE BEGIN DebugMonitor_IRQn 1 */ + + /* USER CODE END DebugMonitor_IRQn 1 */ +} + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + /* USER CODE BEGIN PendSV_IRQn 0 */ + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32G4xx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32g4xx.s). */ +/******************************************************************************/ + +/** + * @brief This function handles EXTI line[15:10] interrupts. + */ +void EXTI15_10_IRQHandler(void) +{ + /* USER CODE BEGIN EXTI15_10_IRQn 0 */ + + /* USER CODE END EXTI15_10_IRQn 0 */ + HAL_GPIO_EXTI_IRQHandler(B1_Pin); + /* USER CODE BEGIN EXTI15_10_IRQn 1 */ + + /* USER CODE END EXTI15_10_IRQn 1 */ +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Src/system_stm32g4xx.c b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Src/system_stm32g4xx.c new file mode 100644 index 0000000000..922e57abc1 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/Core/Src/system_stm32g4xx.c @@ -0,0 +1,285 @@ +/** + ****************************************************************************** + * @file system_stm32g4xx.c + * @author MCD Application Team + * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32g4xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * After each device reset the HSI (16 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32g4xx.s" file, to + * configure the system clock before to branch to main program. + * + * This file configures the system clock as follows: + *============================================================================= + *----------------------------------------------------------------------------- + * System Clock source | HSI + *----------------------------------------------------------------------------- + * SYSCLK(Hz) | 16000000 + *----------------------------------------------------------------------------- + * HCLK(Hz) | 16000000 + *----------------------------------------------------------------------------- + * AHB Prescaler | 1 + *----------------------------------------------------------------------------- + * APB1 Prescaler | 1 + *----------------------------------------------------------------------------- + * APB2 Prescaler | 1 + *----------------------------------------------------------------------------- + * PLL_M | 1 + *----------------------------------------------------------------------------- + * PLL_N | 16 + *----------------------------------------------------------------------------- + * PLL_P | 7 + *----------------------------------------------------------------------------- + * PLL_Q | 2 + *----------------------------------------------------------------------------- + * PLL_R | 2 + *----------------------------------------------------------------------------- + * Require 48MHz for RNG | Disabled + *----------------------------------------------------------------------------- + *============================================================================= + ****************************************************************************** + * @attention + * + * Copyright (c) 2019 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32g4xx_system + * @{ + */ + +/** @addtogroup STM32G4xx_System_Private_Includes + * @{ + */ + +#include "stm32g4xx.h" + +#if !defined (HSE_VALUE) + #define HSE_VALUE 24000000U /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32G4xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32G4xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/* Note: Following vector table addresses must be defined in line with linker + configuration. */ +/*!< Uncomment the following line if you need to relocate the vector table + anywhere in Flash or Sram, else the vector table is kept at the automatic + remap of boot address selected */ +/* #define USER_VECT_TAB_ADDRESS */ + +#if defined(USER_VECT_TAB_ADDRESS) +/*!< Uncomment the following line if you need to relocate your vector Table + in Sram else user remap will be done in Flash. */ +/* #define VECT_TAB_SRAM */ +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x200. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x200. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +#endif /* VECT_TAB_SRAM */ +#endif /* USER_VECT_TAB_ADDRESS */ +/******************************************************************************/ +/** + * @} + */ + +/** @addtogroup STM32G4xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32G4xx_System_Private_Variables + * @{ + */ + /* The SystemCoreClock variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = HSI_VALUE; + + const uint8_t AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U}; + const uint8_t APBPrescTable[8] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U}; + +/** + * @} + */ + +/** @addtogroup STM32G4xx_System_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32G4xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * @param None + * @retval None + */ + +void SystemInit(void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << (10*2))|(3UL << (11*2))); /* set CP10 and CP11 Full Access */ + #endif + + /* Configure the Vector Table location add offset address ------------------*/ +#if defined(USER_VECT_TAB_ADDRESS) + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#endif /* USER_VECT_TAB_ADDRESS */ +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (**) HSI_VALUE is a constant defined in stm32g4xx_hal.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (***) HSE_VALUE is a constant defined in stm32g4xx_hal.h file (default value + * 24 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp, pllvco, pllr, pllsource, pllm; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case 0x04: /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + + case 0x08: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + + case 0x0C: /* PLL used as system clock source */ + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); + pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> 4) + 1U ; + if (pllsource == 0x02UL) /* HSI used as PLL clock source */ + { + pllvco = (HSI_VALUE / pllm); + } + else /* HSE used as PLL clock source */ + { + pllvco = (HSE_VALUE / pllm); + } + pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 8); + pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 25) + 1U) * 2U; + SystemCoreClock = pllvco/pllr; + break; + + default: + break; + } + /* Compute HCLK clock frequency --------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + diff --git a/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc new file mode 100644 index 0000000000..7ffff2a22d --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc @@ -0,0 +1,183 @@ +#MicroXplorer Configuration settings - do not modify +CAD.formats= +CAD.pinconfig= +CAD.provider= +File.Version=6 +KeepUserPlacement=false +LPUART1.BaudRate=115200 +LPUART1.IPParameters=BaudRate,WordLength +LPUART1.WordLength=UART_WORDLENGTH_8B +Mcu.CPN=STM32G491RET6 +Mcu.Family=STM32G4 +Mcu.IP0=LPUART1 +Mcu.IP1=NVIC +Mcu.IP2=RCC +Mcu.IP3=SYS +Mcu.IPNb=4 +Mcu.Name=STM32G491R(C-E)Tx +Mcu.Package=LQFP64 +Mcu.Pin0=PC13 +Mcu.Pin1=PC14-OSC32_IN +Mcu.Pin10=PB3 +Mcu.Pin11=VP_SYS_VS_Systick +Mcu.Pin12=VP_SYS_VS_DBSignals +Mcu.Pin2=PC15-OSC32_OUT +Mcu.Pin3=PF0-OSC_IN +Mcu.Pin4=PF1-OSC_OUT +Mcu.Pin5=PA2 +Mcu.Pin6=PA3 +Mcu.Pin7=PA5 +Mcu.Pin8=PA13 +Mcu.Pin9=PA14 +Mcu.PinsNb=13 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32G491RETx +MxCube.Version=6.10.0 +MxDb.Version=DB.6.0.100 +NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.EXTI15_10_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true +NVIC.ForceEnableDMAVector=true +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 +NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false +NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +PA13.GPIOParameters=GPIO_Label +PA13.GPIO_Label=T_SWDIO +PA13.Locked=true +PA13.Mode=Serial_Wire +PA13.Signal=SYS_JTMS-SWDIO +PA14.GPIOParameters=GPIO_Label +PA14.GPIO_Label=T_SWCLK +PA14.Locked=true +PA14.Mode=Serial_Wire +PA14.Signal=SYS_JTCK-SWCLK +PA2.GPIOParameters=GPIO_Label +PA2.GPIO_Label=LPUART1_TX [STLINKV3E_VCP_RX] +PA2.Locked=true +PA2.Mode=Asynchronous +PA2.Signal=LPUART1_TX +PA3.GPIOParameters=GPIO_Label +PA3.GPIO_Label=LPUART1_RX [STLINKV3E_VCP_TX] +PA3.Locked=true +PA3.Mode=Asynchronous +PA3.Signal=LPUART1_RX +PA5.GPIOParameters=GPIO_Label +PA5.GPIO_Label=LD2 [green led] +PA5.Locked=true +PA5.Signal=GPIO_Output +PB3.GPIOParameters=GPIO_Label +PB3.GPIO_Label=T_SWO +PB3.Locked=true +PB3.Signal=SYS_JTDO-SWO +PC13.GPIOParameters=GPIO_Label +PC13.GPIO_Label=B1 [blue push button] +PC13.Locked=true +PC13.Signal=GPXTI13 +PC14-OSC32_IN.Locked=true +PC14-OSC32_IN.Mode=LSE-External-Oscillator +PC14-OSC32_IN.Signal=RCC_OSC32_IN +PC15-OSC32_OUT.Locked=true +PC15-OSC32_OUT.Mode=LSE-External-Oscillator +PC15-OSC32_OUT.Signal=RCC_OSC32_OUT +PF0-OSC_IN.Locked=true +PF0-OSC_IN.Mode=HSE-External-Oscillator +PF0-OSC_IN.Signal=RCC_OSC_IN +PF1-OSC_OUT.Locked=true +PF1-OSC_OUT.Mode=HSE-External-Oscillator +PF1-OSC_OUT.Signal=RCC_OSC_OUT +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32G491RETx +ProjectManager.FirmwarePackage=STM32Cube FW_G4 V1.5.1 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=0 +ProjectManager.MainLocation=Core/Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain= +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=CubeMX_Config.ioc +ProjectManager.ProjectName=CubeMX_Config +ProjectManager.ProjectStructure= +ProjectManager.RegisterCallBack= +ProjectManager.StackSize=0x400 +ProjectManager.TargetToolchain=MDK-ARM V5.32 +ProjectManager.ToolChainLocation= +ProjectManager.UAScriptAfterPath= +ProjectManager.UAScriptBeforePath= +ProjectManager.UnderRoot=false +ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_LPUART1_UART_Init-LPUART1-false-HAL-true +RCC.ADC12Freq_Value=170000000 +RCC.ADC345Freq_Value=170000000 +RCC.AHBFreq_Value=170000000 +RCC.APB1Freq_Value=170000000 +RCC.APB1TimFreq_Value=170000000 +RCC.APB2Freq_Value=170000000 +RCC.APB2TimFreq_Value=170000000 +RCC.CRSFreq_Value=48000000 +RCC.CortexFreq_Value=170000000 +RCC.EXTERNAL_CLOCK_VALUE=12288000 +RCC.FCLKCortexFreq_Value=170000000 +RCC.FDCANFreq_Value=170000000 +RCC.FamilyName=M +RCC.HCLKFreq_Value=170000000 +RCC.HRTIM1Freq_Value=170000000 +RCC.HSE_VALUE=24000000 +RCC.HSI48_VALUE=48000000 +RCC.HSI_VALUE=16000000 +RCC.I2C1Freq_Value=170000000 +RCC.I2C2Freq_Value=170000000 +RCC.I2C3Freq_Value=170000000 +RCC.I2C4Freq_Value=170000000 +RCC.I2SFreq_Value=170000000 +RCC.IPParameters=ADC12Freq_Value,ADC345Freq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CRSFreq_Value,CortexFreq_Value,EXTERNAL_CLOCK_VALUE,FCLKCortexFreq_Value,FDCANFreq_Value,FamilyName,HCLKFreq_Value,HRTIM1Freq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,I2SFreq_Value,LPTIM1Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,PLLM,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PWRFreq_Value,QSPIFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value +RCC.LPTIM1Freq_Value=170000000 +RCC.LPUART1Freq_Value=170000000 +RCC.LSCOPinFreq_Value=32000 +RCC.LSI_VALUE=32000 +RCC.MCO1PinFreq_Value=16000000 +RCC.PLLM=RCC_PLLM_DIV4 +RCC.PLLN=85 +RCC.PLLPoutputFreq_Value=170000000 +RCC.PLLQoutputFreq_Value=170000000 +RCC.PLLRCLKFreq_Value=170000000 +RCC.PWRFreq_Value=170000000 +RCC.QSPIFreq_Value=170000000 +RCC.RNGFreq_Value=48000000 +RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE +RCC.RTCFreq_Value=32768 +RCC.SAI1Freq_Value=170000000 +RCC.SYSCLKFreq_VALUE=170000000 +RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK +RCC.UART4Freq_Value=170000000 +RCC.UART5Freq_Value=170000000 +RCC.USART1Freq_Value=170000000 +RCC.USART2Freq_Value=170000000 +RCC.USART3Freq_Value=170000000 +RCC.USBFreq_Value=48000000 +RCC.VCOInputFreq_Value=4000000 +RCC.VCOOutputFreq_Value=340000000 +SH.GPXTI13.0=GPIO_EXTI13 +SH.GPXTI13.ConfNb=1 +VP_SYS_VS_DBSignals.Mode=DisableDeadBatterySignals +VP_SYS_VS_DBSignals.Signal=SYS_VS_DBSignals +VP_SYS_VS_Systick.Mode=SysTick +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +board=NUCLEO-G491RE +boardIOC=true diff --git a/bsp/stm32/stm32g491-st-nucleo/board/Kconfig b/bsp/stm32/stm32g491-st-nucleo/board/Kconfig new file mode 100644 index 0000000000..3cfaf5d148 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/Kconfig @@ -0,0 +1,70 @@ +menu "Hardware Drivers Config" + +config SOC_STM32G491RE + bool + select SOC_SERIES_STM32G4 + select RT_USING_COMPONENTS_INIT + select RT_USING_USER_MAIN + default y + +menu "Onboard Peripheral Drivers" + +endmenu + +menu "On-chip Peripheral Drivers" + + config BSP_USING_GPIO + bool "Enable GPIO" + select RT_USING_PIN + default y + + menuconfig BSP_USING_UART + bool "Enable UART" + default y + select RT_USING_SERIAL + if BSP_USING_UART + config BSP_USING_LPUART1 + bool "Enable LPUART1" + default y + + config BSP_LPUART1_RX_USING_DMA + bool "Enable LPUART1 RX DMA" + depends on BSP_USING_LPUART1 && RT_SERIAL_USING_DMA + default n + + config BSP_USING_UART1 + bool "Enable UART1" + default n + + config BSP_UART1_RX_USING_DMA + bool "Enable UART1 RX DMA" + depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA + default n + + config BSP_USING_UART3 + bool "Enable UART3" + default n + + config BSP_UART3_RX_USING_DMA + bool "Enable UART3 RX DMA" + depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA + default n + + config BSP_USING_UART4 + bool "Enable UART4" + default n + + config BSP_UART4_RX_USING_DMA + bool "Enable UART4 RX DMA" + depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA + default n + endif + source "$BSP_DIR/../libraries/HAL_Drivers/drivers/Kconfig" + +endmenu + +menu "Board extended module Drivers" + +endmenu + +endmenu diff --git a/bsp/stm32/stm32g491-st-nucleo/board/SConscript b/bsp/stm32/stm32g491-st-nucleo/board/SConscript new file mode 100644 index 0000000000..4fba7bdba8 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/SConscript @@ -0,0 +1,30 @@ +import os +import rtconfig +from building import * + +Import('SDK_LIB') + +cwd = GetCurrentDir() + +# add general drivers +src = Split(''' +board.c +CubeMX_Config/Core/Src/stm32g4xx_hal_msp.c +''') + +path = [cwd] +path += [cwd + '/CubeMX_Config/Core/Inc'] + +startup_path_prefix = SDK_LIB + +if rtconfig.PLATFORM in ['gcc']: + src += [startup_path_prefix + '/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/gcc/startup_stm32g491xx.s'] +elif rtconfig.PLATFORM in ['armcc', 'armclang']: + src += [startup_path_prefix + '/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/arm/startup_stm32g491xx.s'] +elif rtconfig.PLATFORM in ['iccarm']: + src += [startup_path_prefix + '/STM32G4xx_HAL/CMSIS/Device/ST/STM32G4xx/Source/Templates/iar/startup_stm32g491xx.s'] + +CPPDEFINES = ['STM32G491xx'] +group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES) + +Return('group') diff --git a/bsp/stm32/stm32g491-st-nucleo/board/board.c b/bsp/stm32/stm32g491-st-nucleo/board/board.c new file mode 100644 index 0000000000..ce3f776d4a --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/board.c @@ -0,0 +1,54 @@ +/* + * Copyright (c) 2023-2024, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2023-12-04 Supperthomas First version + */ + +#include "board.h" + +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + + /** Configure the main internal regulator output voltage + */ + HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST); + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV4; + RCC_OscInitStruct.PLL.PLLN = 85; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; + RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) + { + Error_Handler(); + } +} + diff --git a/bsp/stm32/stm32g491-st-nucleo/board/board.h b/bsp/stm32/stm32g491-st-nucleo/board/board.h new file mode 100644 index 0000000000..2154d88034 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/board.h @@ -0,0 +1,43 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-11-06 SummerGift first version + * 2019-01-08 AndeyQi add stm32f446-st-nucleo bsp + */ + +#ifndef __BOARD_H__ +#define __BOARD_H__ + +#include +#include +#include "drv_common.h" +#include "drv_gpio.h" + +#define STM32_FLASH_START_ADRESS ((uint32_t)0x08000000) +#define STM32_FLASH_SIZE (512 * 1024) +#define STM32_FLASH_END_ADDRESS ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE)) + +#define STM32_SRAM_SIZE 32 +#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024) + +#if defined(__ARMCC_VERSION) +extern int Image$$RW_IRAM1$$ZI$$Limit; +#define HEAP_BEGIN (&Image$$RW_IRAM1$$ZI$$Limit) +#elif __ICCARM__ +#pragma section="CSTACK" +#define HEAP_BEGIN (__segment_end("CSTACK")) +#else +extern int __bss_end; +#define HEAP_BEGIN (&__bss_end) +#endif + +#define HEAP_END STM32_SRAM_END + +void SystemClock_Config(void); + +#endif + diff --git a/bsp/stm32/stm32g491-st-nucleo/board/linker_scripts/link.icf b/bsp/stm32/stm32g491-st-nucleo/board/linker_scripts/link.icf new file mode 100644 index 0000000000..4274ac64e6 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/linker_scripts/link.icf @@ -0,0 +1,28 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x0400; +define symbol __ICFEDIT_size_heap__ = 0x000; +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, last block CSTACK}; diff --git a/bsp/stm32/stm32g491-st-nucleo/board/linker_scripts/link.lds b/bsp/stm32/stm32g491-st-nucleo/board/linker_scripts/link.lds new file mode 100644 index 0000000000..67337e873b --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/linker_scripts/link.lds @@ -0,0 +1,158 @@ +/* + * linker script for STM32F4xx with GNU ld + * bernard.xiong 2009-10-14 + */ + +/* Program Entry, set to mark it as "used" and avoid gc */ +MEMORY +{ + ROM (rx) : ORIGIN = 0x08000000, LENGTH = 512k /* 512KB flash */ + RAM (rw) : ORIGIN = 0x20000000, LENGTH = 128k /* 128K sram */ +} +ENTRY(Reset_Handler) +_system_stack_size = 0x400; + +SECTIONS +{ + .text : + { + . = ALIGN(4); + _stext = .; + KEEP(*(.isr_vector)) /* Startup code */ + + . = ALIGN(4); + *(.text) /* remaining code */ + *(.text.*) /* remaining code */ + *(.rodata) /* read-only data (constants) */ + *(.rodata*) + *(.glue_7) + *(.glue_7t) + *(.gnu.linkonce.t*) + + /* section information for finsh shell */ + . = ALIGN(4); + __fsymtab_start = .; + KEEP(*(FSymTab)) + __fsymtab_end = .; + + . = ALIGN(4); + __vsymtab_start = .; + KEEP(*(VSymTab)) + __vsymtab_end = .; + + /* section information for initial. */ + . = ALIGN(4); + __rt_init_start = .; + KEEP(*(SORT(.rti_fn*))) + __rt_init_end = .; + + . = ALIGN(4); + + PROVIDE(__ctors_start__ = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + PROVIDE(__ctors_end__ = .); + + . = ALIGN(4); + + _etext = .; + } > ROM = 0 + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + + /* This is used by the startup in order to initialize the .data secion */ + _sidata = .; + } > ROM + __exidx_end = .; + + /* .data section which is used for initialized data */ + + .data : AT (_sidata) + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _sdata = . ; + + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + + + PROVIDE(__dtors_start__ = .); + KEEP(*(SORT(.dtors.*))) + KEEP(*(.dtors)) + PROVIDE(__dtors_end__ = .); + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _edata = . ; + } >RAM + + .stack : + { + . = ALIGN(4); + _sstack = .; + . = . + _system_stack_size; + . = ALIGN(4); + _estack = .; + } >RAM + + __bss_start = .; + .bss : + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; + + *(.bss) + *(.bss.*) + *(COMMON) + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _ebss = . ; + + *(.bss.init) + } > RAM + __bss_end = .; + + _end = .; + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + * Symbols in the DWARF debugging sections are relative to the beginning + * of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +} diff --git a/bsp/stm32/stm32g491-st-nucleo/board/linker_scripts/link.sct b/bsp/stm32/stm32g491-st-nucleo/board/linker_scripts/link.sct new file mode 100644 index 0000000000..a370c46f9e --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/board/linker_scripts/link.sct @@ -0,0 +1,15 @@ +; ************************************************************* +; *** Scatter-Loading Description File generated by uVision *** +; ************************************************************* + +LR_IROM1 0x08000000 0x00080000 { ; load region size_region + ER_IROM1 0x08000000 0x00080000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + RW_IRAM1 0x20000000 0x0001C000 { ; RW data + .ANY (+RW +ZI) + } +} + diff --git a/bsp/stm32/stm32g491-st-nucleo/figures/board.jpg b/bsp/stm32/stm32g491-st-nucleo/figures/board.jpg new file mode 100644 index 0000000000..0869afd17d Binary files /dev/null and b/bsp/stm32/stm32g491-st-nucleo/figures/board.jpg differ diff --git a/bsp/stm32/stm32g491-st-nucleo/project.ewd b/bsp/stm32/stm32g491-st-nucleo/project.ewd new file mode 100644 index 0000000000..eaaa7f7470 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/project.ewd @@ -0,0 +1,2834 @@ + + + 3 + + rt-thread + + ARM + + 1 + + C-SPY + 2 + + 29 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 1 + + + + + + + + CADI_ID + 2 + + 0 + 1 + 1 + + + + + + + + + CMSISDAP_ID + 2 + + 4 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + IJET_ID + 2 + + 8 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + JLINK_ID + 2 + + 16 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + PEMICRO_ID + 2 + + 3 + 1 + 1 + + + + + + + + STLINK_ID + 2 + + 4 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 1 + + + + + + + + TIFET_ID + 2 + + 1 + 1 + 1 + + + + + + + + + + + + + + + + + + + XDS100_ID + 2 + + 6 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin + 0 + + + + + Release + + ARM + + 0 + + C-SPY + 2 + + 29 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 0 + + + + + + + + CADI_ID + 2 + + 0 + 1 + 0 + + + + + + + + + CMSISDAP_ID + 2 + + 4 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 0 + + + + + + + + + + + IJET_ID + 2 + + 8 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + JLINK_ID + 2 + + 16 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 2 + 1 + 0 + + + + + + + + + + PEMICRO_ID + 2 + + 3 + 1 + 0 + + + + + + + + STLINK_ID + 2 + + 4 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 0 + + + + + + + + TIFET_ID + 2 + + 1 + 1 + 0 + + + + + + + + + + + + + + + + + + + XDS100_ID + 2 + + 6 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin + 0 + + + + diff --git a/bsp/stm32/stm32g491-st-nucleo/project.ewp b/bsp/stm32/stm32g491-st-nucleo/project.ewp new file mode 100644 index 0000000000..c389d257b1 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/project.ewp @@ -0,0 +1,2385 @@ + + 3 + + rt-thread + + ARM + + 1 + + General + 3 + + 33 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 37 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 11 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + 176 + inputOutputBased + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 25 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + + Release + + ARM + + 0 + + General + 3 + + 33 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 37 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 11 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 0 + + + + + + + + + CUSTOM + 3 + + + + 0 + inputOutputBased + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 25 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 0 + + + + + + + + Applications + + $PROJ_DIR$\applications\main.c + + + + Compiler + + $PROJ_DIR$\..\..\..\components\libc\compilers\common\cctype.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\common\cstdlib.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\common\cstring.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\common\ctime.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\common\cunistd.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\common\cwchar.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\environ.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_close.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_lseek.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_mem.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_open.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_read.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_remove.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_write.c + + + $PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscalls.c + + + + CPU + + $PROJ_DIR$\..\..\..\libcpu\arm\common\atomic_arm.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\context_iar.S + + + $PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\cpuport.c + + + + DeviceDrivers + + $PROJ_DIR$\..\..\..\components\drivers\core\device.c + + + $PROJ_DIR$\..\..\..\components\drivers\ipc\completion.c + + + $PROJ_DIR$\..\..\..\components\drivers\ipc\dataqueue.c + + + $PROJ_DIR$\..\..\..\components\drivers\ipc\pipe.c + + + $PROJ_DIR$\..\..\..\components\drivers\ipc\ringblk_buf.c + + + $PROJ_DIR$\..\..\..\components\drivers\ipc\ringbuffer.c + + + $PROJ_DIR$\..\..\..\components\drivers\ipc\waitqueue.c + + + $PROJ_DIR$\..\..\..\components\drivers\ipc\workqueue.c + + + $PROJ_DIR$\..\..\..\components\drivers\misc\pin.c + + + $PROJ_DIR$\..\..\..\components\drivers\serial\serial.c + + + + Drivers + + $PROJ_DIR$\..\libraries\HAL_Drivers\drivers\drv_gpio.c + + + $PROJ_DIR$\..\libraries\HAL_Drivers\drivers\drv_usart.c + + + $PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\CMSIS\Device\ST\STM32G4xx\Source\Templates\iar\startup_stm32g491xx.s + + + $PROJ_DIR$\board\CubeMX_Config\Core\Src\stm32g4xx_hal_msp.c + + + $PROJ_DIR$\board\board.c + + + + Finsh + + $PROJ_DIR$\..\..\..\components\finsh\shell.c + + + $PROJ_DIR$\..\..\..\components\finsh\msh.c + + + $PROJ_DIR$\..\..\..\components\finsh\msh_parse.c + + + $PROJ_DIR$\..\..\..\components\finsh\cmd.c + + + + Kernel + + $PROJ_DIR$\..\..\..\src\clock.c + + + $PROJ_DIR$\..\..\..\src\components.c + + + $PROJ_DIR$\..\..\..\src\idle.c + + + $PROJ_DIR$\..\..\..\src\ipc.c + + + $PROJ_DIR$\..\..\..\src\irq.c + + + $PROJ_DIR$\..\..\..\src\kservice.c + + + $PROJ_DIR$\..\..\..\src\mem.c + + + $PROJ_DIR$\..\..\..\src\mempool.c + + + $PROJ_DIR$\..\..\..\src\object.c + + + $PROJ_DIR$\..\..\..\src\scheduler_up.c + + + $PROJ_DIR$\..\..\..\src\thread.c + + + $PROJ_DIR$\..\..\..\src\timer.c + + + + Libraries + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma_ex.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_gpio.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc_ex.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_usart.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr_ex.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cryp.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_usart_ex.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\CMSIS\Device\ST\STM32G4xx\Source\Templates\system_stm32g4xx.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cortex.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_uart.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_uart_ex.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rng.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_crc.c + + + $PROJ_DIR$\..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cryp_ex.c + + + + POSIX + + diff --git a/bsp/stm32/stm32g491-st-nucleo/project.eww b/bsp/stm32/stm32g491-st-nucleo/project.eww new file mode 100644 index 0000000000..c2cb02eb1e --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/project.eww @@ -0,0 +1,10 @@ + + + + + $WS_DIR$\project.ewp + + + + + diff --git a/bsp/stm32/stm32g491-st-nucleo/project.uvoptx b/bsp/stm32/stm32g491-st-nucleo/project.uvoptx new file mode 100644 index 0000000000..6674530fed --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/project.uvoptx @@ -0,0 +1,1016 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc; *.md + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + rt-thread + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\keil\List\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 18 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 6 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 ) -FN1 -FC8000 -FD20000000 -FF0STM32G49x-Ax_512 -FL080000 -FS08000000 -FP0($$Device:STM32G491RETx$CMSIS\Flash\STM32G49x-Ax_512.FLM) + + + 0 + ST-LINKIII-KEIL_SWO + -U0039004E3431511337393330 -O206 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP (ARM Core") -D00(2BA01477) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC8000 -FN1 -FF0STM32G49x-Ax_512.FLM -FS08000000 -FL080000 -FP0($$Device:STM32G491RETx$CMSIS\Flash\STM32G49x-Ax_512.FLM) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + 1 + 0 + 0 + 2 + 10000000 + + + + + + Applications + 1 + 0 + 0 + 0 + + 1 + 1 + 1 + 0 + 0 + 0 + applications\main.c + main.c + 0 + 0 + + + + + Compiler + 1 + 0 + 0 + 0 + + 2 + 2 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\armlibc\syscall_mem.c + syscall_mem.c + 0 + 0 + + + 2 + 3 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\armlibc\syscalls.c + syscalls.c + 0 + 0 + + + 2 + 4 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\cctype.c + cctype.c + 0 + 0 + + + 2 + 5 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\cstdlib.c + cstdlib.c + 0 + 0 + + + 2 + 6 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\cstring.c + cstring.c + 0 + 0 + + + 2 + 7 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\ctime.c + ctime.c + 0 + 0 + + + 2 + 8 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\cunistd.c + cunistd.c + 0 + 0 + + + 2 + 9 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\cwchar.c + cwchar.c + 0 + 0 + + + + + CPU + 0 + 0 + 0 + 0 + + 3 + 10 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\common\atomic_arm.c + atomic_arm.c + 0 + 0 + + + 3 + 11 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\common\div0.c + div0.c + 0 + 0 + + + 3 + 12 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\common\showmem.c + showmem.c + 0 + 0 + + + 3 + 13 + 2 + 0 + 0 + 0 + ..\..\..\libcpu\arm\cortex-m4\context_rvds.S + context_rvds.S + 0 + 0 + + + 3 + 14 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\cortex-m4\cpuport.c + cpuport.c + 0 + 0 + + + + + DeviceDrivers + 0 + 0 + 0 + 0 + + 4 + 15 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\core\device.c + device.c + 0 + 0 + + + 4 + 16 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\completion.c + completion.c + 0 + 0 + + + 4 + 17 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\dataqueue.c + dataqueue.c + 0 + 0 + + + 4 + 18 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\pipe.c + pipe.c + 0 + 0 + + + 4 + 19 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\ringblk_buf.c + ringblk_buf.c + 0 + 0 + + + 4 + 20 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\ringbuffer.c + ringbuffer.c + 0 + 0 + + + 4 + 21 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\waitqueue.c + waitqueue.c + 0 + 0 + + + 4 + 22 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\workqueue.c + workqueue.c + 0 + 0 + + + 4 + 23 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\misc\pin.c + pin.c + 0 + 0 + + + 4 + 24 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\serial\serial.c + serial.c + 0 + 0 + + + + + Drivers + 0 + 0 + 0 + 0 + + 5 + 25 + 1 + 0 + 0 + 0 + ..\libraries\HAL_Drivers\drivers\drv_gpio.c + drv_gpio.c + 0 + 0 + + + 5 + 26 + 1 + 0 + 0 + 0 + ..\libraries\HAL_Drivers\drivers\drv_usart.c + drv_usart.c + 0 + 0 + + + 5 + 27 + 1 + 0 + 0 + 0 + ..\libraries\HAL_Drivers\drv_common.c + drv_common.c + 0 + 0 + + + 5 + 28 + 2 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\CMSIS\Device\ST\STM32G4xx\Source\Templates\arm\startup_stm32g491xx.s + startup_stm32g491xx.s + 0 + 0 + + + 5 + 29 + 1 + 0 + 0 + 0 + board\CubeMX_Config\Core\Src\stm32g4xx_hal_msp.c + stm32g4xx_hal_msp.c + 0 + 0 + + + 5 + 30 + 1 + 0 + 0 + 0 + board\board.c + board.c + 0 + 0 + + + + + Finsh + 0 + 0 + 0 + 0 + + 6 + 31 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\shell.c + shell.c + 0 + 0 + + + 6 + 32 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\msh.c + msh.c + 0 + 0 + + + 6 + 33 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\msh_parse.c + msh_parse.c + 0 + 0 + + + 6 + 34 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\cmd.c + cmd.c + 0 + 0 + + + + + Kernel + 0 + 0 + 0 + 0 + + 7 + 35 + 1 + 0 + 0 + 0 + ..\..\..\src\clock.c + clock.c + 0 + 0 + + + 7 + 36 + 1 + 0 + 0 + 0 + ..\..\..\src\components.c + components.c + 0 + 0 + + + 7 + 37 + 1 + 0 + 0 + 0 + ..\..\..\src\idle.c + idle.c + 0 + 0 + + + 7 + 38 + 1 + 0 + 0 + 0 + ..\..\..\src\ipc.c + ipc.c + 0 + 0 + + + 7 + 39 + 1 + 0 + 0 + 0 + ..\..\..\src\irq.c + irq.c + 0 + 0 + + + 7 + 40 + 1 + 0 + 0 + 0 + ..\..\..\src\kservice.c + kservice.c + 0 + 0 + + + 7 + 41 + 1 + 0 + 0 + 0 + ..\..\..\src\mem.c + mem.c + 0 + 0 + + + 7 + 42 + 1 + 0 + 0 + 0 + ..\..\..\src\mempool.c + mempool.c + 0 + 0 + + + 7 + 43 + 1 + 0 + 0 + 0 + ..\..\..\src\object.c + object.c + 0 + 0 + + + 7 + 44 + 1 + 0 + 0 + 0 + ..\..\..\src\scheduler_up.c + scheduler_up.c + 0 + 0 + + + 7 + 45 + 1 + 0 + 0 + 0 + ..\..\..\src\thread.c + thread.c + 0 + 0 + + + 7 + 46 + 1 + 0 + 0 + 0 + ..\..\..\src\timer.c + timer.c + 0 + 0 + + + + + Libraries + 0 + 0 + 0 + 0 + + 8 + 47 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr.c + stm32g4xx_hal_pwr.c + 0 + 0 + + + 8 + 48 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma_ex.c + stm32g4xx_hal_dma_ex.c + 0 + 0 + + + 8 + 49 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_gpio.c + stm32g4xx_hal_gpio.c + 0 + 0 + + + 8 + 50 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc_ex.c + stm32g4xx_hal_rcc_ex.c + 0 + 0 + + + 8 + 51 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_usart.c + stm32g4xx_hal_usart.c + 0 + 0 + + + 8 + 52 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr_ex.c + stm32g4xx_hal_pwr_ex.c + 0 + 0 + + + 8 + 53 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cryp.c + stm32g4xx_hal_cryp.c + 0 + 0 + + + 8 + 54 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_usart_ex.c + stm32g4xx_hal_usart_ex.c + 0 + 0 + + + 8 + 55 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\CMSIS\Device\ST\STM32G4xx\Source\Templates\system_stm32g4xx.c + system_stm32g4xx.c + 0 + 0 + + + 8 + 56 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cortex.c + stm32g4xx_hal_cortex.c + 0 + 0 + + + 8 + 57 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal.c + stm32g4xx_hal.c + 0 + 0 + + + 8 + 58 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc.c + stm32g4xx_hal_rcc.c + 0 + 0 + + + 8 + 59 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma.c + stm32g4xx_hal_dma.c + 0 + 0 + + + 8 + 60 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_uart.c + stm32g4xx_hal_uart.c + 0 + 0 + + + 8 + 61 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_uart_ex.c + stm32g4xx_hal_uart_ex.c + 0 + 0 + + + 8 + 62 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rng.c + stm32g4xx_hal_rng.c + 0 + 0 + + + 8 + 63 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_crc.c + stm32g4xx_hal_crc.c + 0 + 0 + + + 8 + 64 + 1 + 0 + 0 + 0 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cryp_ex.c + stm32g4xx_hal_cryp_ex.c + 0 + 0 + + + + diff --git a/bsp/stm32/stm32g491-st-nucleo/project.uvprojx b/bsp/stm32/stm32g491-st-nucleo/project.uvprojx new file mode 100644 index 0000000000..d32a7a5414 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/project.uvprojx @@ -0,0 +1,753 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + rt-thread + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::ARMCC + 0 + + + STM32G491RETx + STMicroelectronics + Keil.STM32G4xx_DFP.1.5.0 + https://www.keil.com/pack/ + IRAM(0x20000000,0x0001C000) IROM(0x08000000,0x00080000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC8000 -FN1 -FF0STM32G49x-Ax_512 -FS08000000 -FL080000 -FP0($$Device:STM32G491RETx$CMSIS\Flash\STM32G49x-Ax_512.FLM)) + 0 + $$Device:STM32G491RETx$Drivers\CMSIS\Device\ST\STM32G4xx\Include\stm32g4xx.h + + + + + + + + + + $$Device:STM32G491RETx$CMSIS\SVD\STM32G491xx.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\keil\Obj\ + rt-thread + 1 + 0 + 0 + 1 + 0 + .\build\keil\List\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin !L --output rtthread.bin + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 2 + 0 + 0 + 0 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x1c000 + + + 1 + 0x8000000 + 0x80000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x80000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x1c000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + 0 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + __STDC_LIMIT_MACROS, RT_USING_ARMLIBC, USE_HAL_DRIVER, RT_USING_LIBC, __CLK_TCK=RT_TICK_PER_SECOND, __RTTHREAD__, STM32G491xx + + .;..\libraries\HAL_Drivers;..\..\..\components\drivers\include;board\CubeMX_Config\Core\Inc;..\..\..\libcpu\arm\common;..\..\..\components\libc\posix\ipc;..\..\..\components\libc\compilers\common\include;..\..\..\components\libc\posix\io\poll;..\libraries\HAL_Drivers\CMSIS\Include;..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Inc;board;applications;..\..\..\components\libc\compilers\common\extension;..\libraries\STM32G4xx_HAL\CMSIS\Device\ST\STM32G4xx\Include;..\..\..\components\drivers\include;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\libc\posix\io\eventfd;..\..\..\components\finsh;..\..\..\components\drivers\include;..\..\..\include;..\..\..\components\drivers\include;..\libraries\HAL_Drivers\drivers;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\..\..\components\libc\posix\io\epoll;..\libraries\HAL_Drivers\drivers\config + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 4 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + .\board\linker_scripts\link.sct + + + + + + + + + + + Applications + + + main.c + 1 + applications\main.c + + + + + Compiler + + + syscall_mem.c + 1 + ..\..\..\components\libc\compilers\armlibc\syscall_mem.c + + + syscalls.c + 1 + ..\..\..\components\libc\compilers\armlibc\syscalls.c + + + cctype.c + 1 + ..\..\..\components\libc\compilers\common\cctype.c + + + cstdlib.c + 1 + ..\..\..\components\libc\compilers\common\cstdlib.c + + + cstring.c + 1 + ..\..\..\components\libc\compilers\common\cstring.c + + + ctime.c + 1 + ..\..\..\components\libc\compilers\common\ctime.c + + + cunistd.c + 1 + ..\..\..\components\libc\compilers\common\cunistd.c + + + cwchar.c + 1 + ..\..\..\components\libc\compilers\common\cwchar.c + + + + + CPU + + + atomic_arm.c + 1 + ..\..\..\libcpu\arm\common\atomic_arm.c + + + div0.c + 1 + ..\..\..\libcpu\arm\common\div0.c + + + showmem.c + 1 + ..\..\..\libcpu\arm\common\showmem.c + + + context_rvds.S + 2 + ..\..\..\libcpu\arm\cortex-m4\context_rvds.S + + + cpuport.c + 1 + ..\..\..\libcpu\arm\cortex-m4\cpuport.c + + + + + DeviceDrivers + + + device.c + 1 + ..\..\..\components\drivers\core\device.c + + + completion.c + 1 + ..\..\..\components\drivers\ipc\completion.c + + + dataqueue.c + 1 + ..\..\..\components\drivers\ipc\dataqueue.c + + + pipe.c + 1 + ..\..\..\components\drivers\ipc\pipe.c + + + ringblk_buf.c + 1 + ..\..\..\components\drivers\ipc\ringblk_buf.c + + + ringbuffer.c + 1 + ..\..\..\components\drivers\ipc\ringbuffer.c + + + waitqueue.c + 1 + ..\..\..\components\drivers\ipc\waitqueue.c + + + workqueue.c + 1 + ..\..\..\components\drivers\ipc\workqueue.c + + + pin.c + 1 + ..\..\..\components\drivers\misc\pin.c + + + serial.c + 1 + ..\..\..\components\drivers\serial\serial.c + + + + + Drivers + + + drv_gpio.c + 1 + ..\libraries\HAL_Drivers\drivers\drv_gpio.c + + + drv_usart.c + 1 + ..\libraries\HAL_Drivers\drivers\drv_usart.c + + + drv_common.c + 1 + ..\libraries\HAL_Drivers\drv_common.c + + + startup_stm32g491xx.s + 2 + ..\libraries\STM32G4xx_HAL\CMSIS\Device\ST\STM32G4xx\Source\Templates\arm\startup_stm32g491xx.s + + + stm32g4xx_hal_msp.c + 1 + board\CubeMX_Config\Core\Src\stm32g4xx_hal_msp.c + + + board.c + 1 + board\board.c + + + + + Finsh + + + shell.c + 1 + ..\..\..\components\finsh\shell.c + + + msh.c + 1 + ..\..\..\components\finsh\msh.c + + + msh_parse.c + 1 + ..\..\..\components\finsh\msh_parse.c + + + cmd.c + 1 + ..\..\..\components\finsh\cmd.c + + + + + Kernel + + + clock.c + 1 + ..\..\..\src\clock.c + + + components.c + 1 + ..\..\..\src\components.c + + + idle.c + 1 + ..\..\..\src\idle.c + + + ipc.c + 1 + ..\..\..\src\ipc.c + + + irq.c + 1 + ..\..\..\src\irq.c + + + kservice.c + 1 + ..\..\..\src\kservice.c + + + mem.c + 1 + ..\..\..\src\mem.c + + + mempool.c + 1 + ..\..\..\src\mempool.c + + + object.c + 1 + ..\..\..\src\object.c + + + scheduler_up.c + 1 + ..\..\..\src\scheduler_up.c + + + thread.c + 1 + ..\..\..\src\thread.c + + + timer.c + 1 + ..\..\..\src\timer.c + + + + + Libraries + + + stm32g4xx_hal_pwr.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr.c + + + stm32g4xx_hal_dma_ex.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma_ex.c + + + stm32g4xx_hal_gpio.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_gpio.c + + + stm32g4xx_hal_rcc_ex.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc_ex.c + + + stm32g4xx_hal_usart.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_usart.c + + + stm32g4xx_hal_pwr_ex.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr_ex.c + + + stm32g4xx_hal_cryp.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cryp.c + + + stm32g4xx_hal_usart_ex.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_usart_ex.c + + + system_stm32g4xx.c + 1 + ..\libraries\STM32G4xx_HAL\CMSIS\Device\ST\STM32G4xx\Source\Templates\system_stm32g4xx.c + + + stm32g4xx_hal_cortex.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cortex.c + + + stm32g4xx_hal.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal.c + + + stm32g4xx_hal_rcc.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc.c + + + stm32g4xx_hal_dma.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma.c + + + stm32g4xx_hal_uart.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_uart.c + + + stm32g4xx_hal_uart_ex.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_uart_ex.c + + + stm32g4xx_hal_rng.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rng.c + + + stm32g4xx_hal_crc.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_crc.c + + + stm32g4xx_hal_cryp_ex.c + 1 + ..\libraries\STM32G4xx_HAL\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cryp_ex.c + + + + + + + + + + + + + + diff --git a/bsp/stm32/stm32g491-st-nucleo/rtconfig.h b/bsp/stm32/stm32g491-st-nucleo/rtconfig.h new file mode 100644 index 0000000000..f5bc8313f1 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/rtconfig.h @@ -0,0 +1,263 @@ +#ifndef RT_CONFIG_H__ +#define RT_CONFIG_H__ + +/* Automatically generated file; DO NOT EDIT. */ +/* RT-Thread Configuration */ + +/* RT-Thread Kernel */ + +#define RT_NAME_MAX 8 +#define RT_CPUS_NR 1 +#define RT_ALIGN_SIZE 8 +#define RT_THREAD_PRIORITY_32 +#define RT_THREAD_PRIORITY_MAX 32 +#define RT_TICK_PER_SECOND 1000 +#define RT_USING_OVERFLOW_CHECK +#define RT_USING_HOOK +#define RT_HOOK_USING_FUNC_PTR +#define RT_USING_IDLE_HOOK +#define RT_IDLE_HOOK_LIST_SIZE 4 +#define IDLE_THREAD_STACK_SIZE 256 + +/* kservice optimization */ + +#define RT_USING_DEBUG +#define RT_DEBUGING_COLOR +#define RT_DEBUGING_CONTEXT + +/* Inter-Thread communication */ + +#define RT_USING_SEMAPHORE +#define RT_USING_MUTEX +#define RT_USING_EVENT +#define RT_USING_MAILBOX +#define RT_USING_MESSAGEQUEUE + +/* Memory Management */ + +#define RT_USING_MEMPOOL +#define RT_USING_SMALL_MEM +#define RT_USING_SMALL_MEM_AS_HEAP +#define RT_USING_HEAP +#define RT_USING_DEVICE +#define RT_USING_CONSOLE +#define RT_CONSOLEBUF_SIZE 128 +#define RT_CONSOLE_DEVICE_NAME "lpuart1" +#define RT_VER_NUM 0x50100 +#define RT_BACKTRACE_LEVEL_MAX_NR 32 +#define RT_USING_HW_ATOMIC +#define RT_USING_CPU_FFS +#define ARCH_ARM +#define ARCH_ARM_CORTEX_M +#define ARCH_ARM_CORTEX_M4 + +/* RT-Thread Components */ + +#define RT_USING_COMPONENTS_INIT +#define RT_USING_USER_MAIN +#define RT_MAIN_THREAD_STACK_SIZE 2048 +#define RT_MAIN_THREAD_PRIORITY 10 +#define RT_USING_MSH +#define RT_USING_FINSH +#define FINSH_USING_MSH +#define FINSH_THREAD_NAME "tshell" +#define FINSH_THREAD_PRIORITY 20 +#define FINSH_THREAD_STACK_SIZE 4096 +#define FINSH_USING_HISTORY +#define FINSH_HISTORY_LINES 5 +#define FINSH_USING_SYMTAB +#define FINSH_CMD_SIZE 80 +#define MSH_USING_BUILT_IN_COMMANDS +#define FINSH_USING_DESCRIPTION +#define FINSH_ARG_MAX 10 +#define FINSH_USING_OPTION_COMPLETION + +/* DFS: device virtual file system */ + + +/* Device Drivers */ + +#define RT_USING_DEVICE_IPC +#define RT_UNAMED_PIPE_NUMBER 64 +#define RT_USING_SERIAL +#define RT_USING_SERIAL_V1 +#define RT_SERIAL_USING_DMA +#define RT_SERIAL_RB_BUFSZ 64 +#define RT_USING_PIN + +/* Using USB */ + + +/* C/C++ and POSIX layer */ + +/* ISO-ANSI C layer */ + +/* Timezone and Daylight Saving Time */ + +#define RT_LIBC_USING_LIGHT_TZ_DST +#define RT_LIBC_TZ_DEFAULT_HOUR 8 +#define RT_LIBC_TZ_DEFAULT_MIN 0 +#define RT_LIBC_TZ_DEFAULT_SEC 0 + +/* POSIX (Portable Operating System Interface) layer */ + + +/* Interprocess Communication (IPC) */ + + +/* Socket is in the 'Network' category */ + + +/* Network */ + + +/* Memory protection */ + + +/* Utilities */ + + +/* RT-Thread Utestcases */ + + +/* RT-Thread online packages */ + +/* IoT - internet of things */ + + +/* Wi-Fi */ + +/* Marvell WiFi */ + + +/* Wiced WiFi */ + + +/* CYW43012 WiFi */ + + +/* BL808 WiFi */ + + +/* CYW43439 WiFi */ + + +/* IoT Cloud */ + + +/* security packages */ + + +/* language packages */ + +/* JSON: JavaScript Object Notation, a lightweight data-interchange format */ + + +/* XML: Extensible Markup Language */ + + +/* multimedia packages */ + +/* LVGL: powerful and easy-to-use embedded GUI library */ + + +/* u8g2: a monochrome graphic library */ + + +/* tools packages */ + + +/* system packages */ + +/* enhanced kernel services */ + + +/* acceleration: Assembly language or algorithmic acceleration packages */ + + +/* CMSIS: ARM Cortex-M Microcontroller Software Interface Standard */ + + +/* Micrium: Micrium software products porting for RT-Thread */ + + +/* peripheral libraries and drivers */ + +/* sensors drivers */ + + +/* touch drivers */ + + +/* Kendryte SDK */ + + +/* AI packages */ + + +/* Signal Processing and Control Algorithm Packages */ + + +/* miscellaneous packages */ + +/* project laboratory */ + +/* samples: kernel and components samples */ + + +/* entertainment: terminal games and other interesting software packages */ + + +/* Arduino libraries */ + + +/* Projects and Demos */ + + +/* Sensors */ + + +/* Display */ + + +/* Timing */ + + +/* Data Processing */ + + +/* Data Storage */ + +/* Communication */ + + +/* Device Control */ + + +/* Other */ + + +/* Signal IO */ + + +/* Uncategorized */ + +#define SOC_FAMILY_STM32 +#define SOC_SERIES_STM32G4 + +/* Hardware Drivers Config */ + +#define SOC_STM32G491RE + +/* Onboard Peripheral Drivers */ + +/* On-chip Peripheral Drivers */ + +#define BSP_USING_GPIO +#define BSP_USING_UART +#define BSP_USING_LPUART1 + +/* Board extended module Drivers */ + + +#endif diff --git a/bsp/stm32/stm32g491-st-nucleo/rtconfig.py b/bsp/stm32/stm32g491-st-nucleo/rtconfig.py new file mode 100644 index 0000000000..5e5bc02064 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/rtconfig.py @@ -0,0 +1,184 @@ +import os + +# toolchains options +ARCH='arm' +CPU='cortex-m4' +CROSS_TOOL='gcc' + +# bsp lib config +BSP_LIBRARY_TYPE = None + +if os.getenv('RTT_CC'): + CROSS_TOOL = os.getenv('RTT_CC') +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') + +# cross_tool provides the cross compiler +# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR +if CROSS_TOOL == 'gcc': + PLATFORM = 'gcc' + EXEC_PATH = r'C:\Users\XXYYZZ' +elif CROSS_TOOL == 'keil': + PLATFORM = 'armcc' + EXEC_PATH = r'C:/Keil_v5' +elif CROSS_TOOL == 'iar': + PLATFORM = 'iccarm' + EXEC_PATH = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.3' + +if os.getenv('RTT_EXEC_PATH'): + EXEC_PATH = os.getenv('RTT_EXEC_PATH') + +BUILD = 'debug' + +if PLATFORM == 'gcc': + # toolchains + PREFIX = 'arm-none-eabi-' + CC = PREFIX + 'gcc' + AS = PREFIX + 'gcc' + AR = PREFIX + 'ar' + CXX = PREFIX + 'g++' + LINK = PREFIX + 'gcc' + TARGET_EXT = 'elf' + SIZE = PREFIX + 'size' + OBJDUMP = PREFIX + 'objdump' + OBJCPY = PREFIX + 'objcopy' + + DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections' + CFLAGS = DEVICE + ' -Dgcc' + AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb ' + LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rt-thread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds' + + CPATH = '' + LPATH = '' + + if BUILD == 'debug': + CFLAGS += ' -O0 -gdwarf-2 -g' + AFLAGS += ' -gdwarf-2' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + + POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n' + +elif PLATFORM == 'armcc': + # toolchains + CC = 'armcc' + CXX = 'armcc' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --cpu Cortex-M4.fp ' + CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99' + AFLAGS = DEVICE + ' --apcs=interwork ' + LFLAGS = DEVICE + ' --scatter "board\linker_scripts\link.sct" --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict' + CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include' + LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib' + + CFLAGS += ' -D__MICROLIB ' + AFLAGS += ' --pd "__MICROLIB SETA 1" ' + LFLAGS += ' --library_type=microlib ' + EXEC_PATH += '/ARM/ARMCC/bin/' + + if BUILD == 'debug': + CFLAGS += ' -g -O0' + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + CFLAGS += ' -std=c99' + + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' + +elif PLATFORM == 'armclang': + # toolchains + CC = 'armclang' + CXX = 'armclang' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --cpu Cortex-M4.fp ' + CFLAGS = ' --target=arm-arm-none-eabi -mcpu=cortex-m4 ' + CFLAGS += ' -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 ' + CFLAGS += ' -mfloat-abi=hard -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar ' + CFLAGS += ' -gdwarf-3 -ffunction-sections ' + AFLAGS = DEVICE + ' --apcs=interwork ' + LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers ' + LFLAGS += ' --list rt-thread.map ' + LFLAGS += r' --strict --scatter "board\linker_scripts\link.sct" ' + CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCLANG/include' + LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCLANG/lib' + + EXEC_PATH += '/ARM/ARMCLANG/bin/' + + if BUILD == 'debug': + CFLAGS += ' -g -O1' # armclang recommend + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + CFLAGS += ' -std=c99' + + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' + +elif PLATFORM == 'iccarm': + # toolchains + CC = 'iccarm' + CXX = 'iccarm' + AS = 'iasmarm' + AR = 'iarchive' + LINK = 'ilinkarm' + TARGET_EXT = 'out' + + DEVICE = '-Dewarm' + + CFLAGS = DEVICE + CFLAGS += ' --diag_suppress Pa050' + CFLAGS += ' --no_cse' + CFLAGS += ' --no_unroll' + CFLAGS += ' --no_inline' + CFLAGS += ' --no_code_motion' + CFLAGS += ' --no_tbaa' + CFLAGS += ' --no_clustering' + CFLAGS += ' --no_scheduling' + CFLAGS += ' --endian=little' + CFLAGS += ' --cpu=Cortex-M4' + CFLAGS += ' -e' + CFLAGS += ' --fpu=VFPv4_sp' + CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"' + CFLAGS += ' --silent' + + AFLAGS = DEVICE + AFLAGS += ' -s+' + AFLAGS += ' -w+' + AFLAGS += ' -r' + AFLAGS += ' --cpu Cortex-M4' + AFLAGS += ' --fpu VFPv4_sp' + AFLAGS += ' -S' + + if BUILD == 'debug': + CFLAGS += ' --debug' + CFLAGS += ' -On' + else: + CFLAGS += ' -Oh' + + LFLAGS = ' --config "board/linker_scripts/link.icf"' + LFLAGS += ' --entry __iar_program_start' + + CXXFLAGS = CFLAGS + + EXEC_PATH = EXEC_PATH + '/arm/bin/' + POST_ACTION = 'ielftool --bin $TARGET rtthread.bin' + +def dist_handle(BSP_ROOT, dist_dir): + import sys + cwd_path = os.getcwd() + sys.path.append(os.path.join(os.path.dirname(BSP_ROOT), 'tools')) + from sdk_dist import dist_do_building + dist_do_building(BSP_ROOT, dist_dir) diff --git a/bsp/stm32/stm32g491-st-nucleo/template.ewp b/bsp/stm32/stm32g491-st-nucleo/template.ewp new file mode 100644 index 0000000000..89bd58d88e --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/template.ewp @@ -0,0 +1,2088 @@ + + + 3 + + rt-thread + + ARM + + 1 + + General + 3 + + 33 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 37 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 11 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + 176 + inputOutputBased + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 25 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + + Release + + ARM + + 0 + + General + 3 + + 33 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 37 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 11 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 0 + + + + + + + + + CUSTOM + 3 + + + + 0 + inputOutputBased + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 25 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 0 + + + + + + + diff --git a/bsp/stm32/stm32g491-st-nucleo/template.eww b/bsp/stm32/stm32g491-st-nucleo/template.eww new file mode 100644 index 0000000000..bd036bb4c9 --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/template.eww @@ -0,0 +1,10 @@ + + + + + $WS_DIR$\template.ewp + + + + + diff --git a/bsp/stm32/stm32g491-st-nucleo/template.uvoptx b/bsp/stm32/stm32g491-st-nucleo/template.uvoptx new file mode 100644 index 0000000000..2230e4b77a --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/template.uvoptx @@ -0,0 +1,192 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc; *.md + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + rt-thread + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\keil\List\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 18 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 6 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 ) -FN1 -FC8000 -FD20000000 -FF0STM32G49x-Ax_512 -FL080000 -FS08000000 -FP0($$Device:STM32G491RETx$CMSIS\Flash\STM32G49x-Ax_512.FLM) + + + 0 + ST-LINKIII-KEIL_SWO + -U0039004E3431511337393330 -O206 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP (ARM Core") -D00(2BA01477) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC8000 -FN1 -FF0STM32G49x-Ax_512.FLM -FS08000000 -FL080000 -FP0($$Device:STM32G491RETx$CMSIS\Flash\STM32G49x-Ax_512.FLM) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + 1 + 0 + 0 + 2 + 10000000 + + + + + + Source Group 1 + 0 + 0 + 0 + 0 + + + diff --git a/bsp/stm32/stm32g491-st-nucleo/template.uvprojx b/bsp/stm32/stm32g491-st-nucleo/template.uvprojx new file mode 100644 index 0000000000..7fa809c87b --- /dev/null +++ b/bsp/stm32/stm32g491-st-nucleo/template.uvprojx @@ -0,0 +1,396 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + rt-thread + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::ARMCC + 0 + + + STM32G491RETx + STMicroelectronics + Keil.STM32G4xx_DFP.1.5.0 + https://www.keil.com/pack/ + IRAM(0x20000000,0x0001C000) IROM(0x08000000,0x00080000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC8000 -FN1 -FF0STM32G49x-Ax_512 -FS08000000 -FL080000 -FP0($$Device:STM32G491RETx$CMSIS\Flash\STM32G49x-Ax_512.FLM)) + 0 + $$Device:STM32G491RETx$Drivers\CMSIS\Device\ST\STM32G4xx\Include\stm32g4xx.h + + + + + + + + + + $$Device:STM32G491RETx$CMSIS\SVD\STM32G491xx.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\keil\Obj\ + rt-thread + 1 + 0 + 0 + 1 + 0 + .\build\keil\List\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin !L --output rtthread.bin + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 2 + 0 + 0 + 0 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x1c000 + + + 1 + 0x8000000 + 0x80000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x80000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x1c000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + 0 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 4 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + .\board\linker_scripts\link.sct + + + + + + + + + + + Source Group 1 + + + + + + + + + + + +