libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity

[components][drivers][sdio] Fix minor issue in sdio driver (#7904) 

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
This commit is contained in:
Fan Yang 2023-08-03 17:10:34 +08:00 committed by GitHub
parent b3831246c2
commit e5c8dd3b05
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 12 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
components/drivers/sdio/mmc.c
View File

@ -307,7 +307,7 @@ out:
}
/*
* Select the bus width amoung 4-bit and 8-bit(SDR).
* Select the bus width among 4-bit and 8-bit(SDR).
* If the bus width is changed successfully, return the selected width value.
* Zero is returned instead of error value if the wide width is not supported.
*/
@ -337,22 +337,21 @@ static int mmc_select_bus_width(struct rt_mmcsd_card *card, rt_uint8_t *ext_csd)
ddr = 2;
}
/*
* Unlike SD, MMC cards dont have a configuration register to notify
* Unlike SD, MMC cards don't have a configuration register to notify
* supported bus width. So bus test command should be run to identify
* the supported bus width or compare the ext csd values of current
* bus width and ext csd values of 1 bit mode read earlier.
* the supported bus width or compare the EXT_CSD values of current
* bus width and EXT_CSD values of 1 bit mode read earlier.
*/
for (idx = 0; idx < sizeof(bus_widths) / sizeof(rt_uint32_t); idx++)
{
/*
* Host is capable of 8bit transfer, then switch
* the device to work in 8bit transfer mode. If the
* mmc switch command returns error then switch to
* 4bit transfer mode. On success set the corresponding
* bus width on the host. Meanwhile, mmc core would
* bail out early if corresponding bus capable wasn't
* set by drivers.
* Determine BUS WIDTH mode according to the capability of host
*/
if (((ext_csd_bits[idx][0] == EXT_CSD_BUS_WIDTH_8) && ((host->flags & MMCSD_BUSWIDTH_8) == 0)) ||
((ext_csd_bits[idx][0] == EXT_CSD_BUS_WIDTH_4) && ((host->flags & MMCSD_BUSWIDTH_4) == 0)))
{
continue;
}
bus_width = bus_widths[idx];
if (bus_width == MMCSD_BUS_WIDTH_1)
{
@ -507,7 +506,7 @@ static int mmc_select_timing(struct rt_mmcsd_card *card)
}
else
{
mmcsd_set_timing(card->host, MMCSD_TIMING_UHS_SDR50);
mmcsd_set_timing(card->host, MMCSD_TIMING_MMC_HS);
mmcsd_set_clock(card->host, card->hs_max_data_rate);
}