libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity

[bsp/phytium]部分设备驱动修改 (#8794) 

* update

* 修改 SDIF 驱动，支持同时使用 TF 卡和 eMMC，更换飞腾派自启动镜像

* drivers debug

* update

* update

* update config

* update

* modify format

---------

Co-authored-by: 朱耿宇 <zhugengyu@phytium.com.cn>
This commit is contained in:
zhangyan 2024-04-19 08:52:09 +08:00 committed by GitHub
parent 6311bcaf24
commit de32f35016
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
46 changed files with 1546 additions and 946 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
bsp/phytium/README.md
View File

@ -58,6 +58,7 @@
2. 启动 RT-Thread env 应用程序，在交互界面可以使用`cd`指令进入`aarch32`或`aarch64`目录
3. 按照指导安装 [aarch32](./aarch32/README.md)或[aarch64](./aarch64/README.md)编译链，并进行相关配置
4. 按照指导[启动镜像程序](./doc/how_to_flashed_binary.md)
5. 参考[使用文件系统](./doc/how_to_use_file_system.md)制作和使用文件系统
### RT-Thread Studio 环境

22
bsp/phytium/aarch32/.config
View File

@ -1219,9 +1219,16 @@ CONFIG_RT_USING_SPIM0=y
# CONFIG_RT_USING_SPIM1 is not set
# CONFIG_RT_USING_SPIM2 is not set
# CONFIG_RT_USING_SPIM3 is not set
# CONFIG_BSP_USING_CAN is not set
CONFIG_BSP_USING_CAN=y
# CONFIG_RT_USING_CANFD is not set
# CONFIG_RT_USING_FILTER is not set
# CONFIG_RT_USING_CAN0 is not set
# CONFIG_RT_USING_CAN1 is not set
CONFIG_BSP_USING_GPIO=y
# CONFIG_BSP_USING_QSPI is not set
CONFIG_BSP_USING_QSPI=y
CONFIG_RT_USING_QSPI0=y
CONFIG_USING_QSPI_CHANNEL0=y
# CONFIG_USING_QSPI_CHANNEL1 is not set
CONFIG_BSP_USING_ETH=y
CONFIG_RT_LWIP_PBUF_POOL_BUFSIZE=1700
CONFIG_BSP_USING_PWM=y
@ -1252,10 +1259,15 @@ CONFIG_RT_USING_MIO1=y
# CONFIG_RT_USING_MIO14 is not set
# CONFIG_RT_USING_MIO15 is not set
# CONFIG_I2C_USE_CONTROLLER is not set
# CONFIG_BSP_USING_SDIF is not set
CONFIG_BSP_USING_SDIF=y
CONFIG_BSP_USING_SDCARD_FATFS=y
# CONFIG_USING_SDIF0 is not set
CONFIG_USING_SDIF1=y
CONFIG_USE_SDIF1_TF=y
# CONFIG_USE_SDIF1_EMMC is not set
CONFIG_BSP_USING_DC=y
CONFIG_RT_USING_DC_CHANNEL0=y
# CONFIG_RT_USING_DC_CHANNEL1 is not set
CONFIG_RT_USING_DC_CHANNEL1=y
# CONFIG_BSP_USING_XHCI is not set
# CONFIG_BSP_USING_PUSB2 is not set
@ -1279,6 +1291,7 @@ CONFIG_TARGET_PHYTIUMPI=y
# CONFIG_TARGET_E2000S is not set
# CONFIG_TARGET_FT2004 is not set
# CONFIG_TARGET_D2000 is not set
# CONFIG_TARGET_PD2308 is not set
CONFIG_SOC_NAME="phytiumpi"
CONFIG_SOC_CORE_NUM=4
CONFIG_F32BIT_MEMORY_ADDRESS=0x80000000
@ -1286,7 +1299,6 @@ CONFIG_F32BIT_MEMORY_LENGTH=0x80000000
CONFIG_F64BIT_MEMORY_ADDRESS=0x2000000000
CONFIG_F64BIT_MEMORY_LENGTH=0x800000000
CONFIG_TARGET_E2000=y
# CONFIG_USE_SPINLOCK is not set
CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
# CONFIG_DEFAULT_DEBUG_PRINT_UART0 is not set
# CONFIG_DEFAULT_DEBUG_PRINT_UART2 is not set

140
bsp/phytium/aarch32/applications/mnt.c
View File

@ -1,140 +0,0 @@
/*
* Copyright (c) 2006-2023, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Email: opensource_embedded@phytium.com.cn
*
* Change Logs:
* Date Author Notes
* 2023-04-27 huanghe first version
* 2023-07-14 liqiaozhong add SD file sys mount func
*
*/
#include <rtthread.h>
#if defined(RT_USING_DFS)
#include <rtdbg.h>
#include <dfs_fs.h>
#include <dfs_file.h>
static int ram_disk_mount(const char *mount_point)
{
#ifdef RT_USING_DFS_RAMFS
extern struct dfs_ramfs *dfs_ramfs_create(rt_uint8_t *pool, rt_size_t size);
rt_uint8_t *pool = RT_NULL;
rt_size_t size = 8 * 1024 * 1024;
pool = rt_malloc(size);
if (pool == RT_NULL)
{
LOG_E("Malloc fail!");
}
if (dfs_mount(RT_NULL, mount_point, "ram", 0, (const void *)dfs_ramfs_create(pool, size)) == 0)
{
LOG_I("RAM file system initializated!");
}
else
{
LOG_E("RAM file system initializate failed!");
}
#endif
return RT_EOK;
}
#ifdef BSP_USING_SDCARD_FATFS
extern void fsdif_change(void);
static int sd_disk_try_mount(char *device_name, char *mount_point, char *fs_type_name, int mkfs_count)
{
struct statfs fs_stat;
int rc = 0;
LOG_I("mount(\"%s\",\"%s\",\"%s\");", device_name, mount_point, fs_type_name);
if (rt_device_find(device_name) == NULL)
{
LOG_I("%s not find!!!", device_name);
return -RT_EIO;
}
mkdir(mount_point, 0);
_remount:
rc = dfs_mount(device_name, mount_point, fs_type_name, 0, 0);
if (rc == 0)
{
LOG_I("mounted %s on %s", device_name, mount_point);
if (dfs_statfs(mount_point, &fs_stat) >= 0)
{
LOG_I("%s size:%d, total: %d, free: %d", mount_point,
fs_stat.f_bsize, fs_stat.f_blocks, fs_stat.f_bfree);
}
}
else
{
if (mkfs_count > 0)
{
/* LOG_I("[%s]try mkfs -t %s %s ", mkfs_count, fs_type_name, device_name);
dfs_mkfs(fs_type_name, device_name); */
mkfs_count--;
LOG_E("%s is not in %s, please format first !!!", device_name, fs_type_name);
goto _remount;
}
LOG_I("mount failed :%d ", rc);
return -RT_EIO;
}
return RT_EOK;
}
static void sd_filesytem_task_entry(void *parameter)
{
int result;
LOG_D("sdio host change: %d", change);
mmcsd_wait_cd_changed(0); /* clear */
fsdif_change(); /* send cd change to host */
/* block until plug/unplug event happens */
result = mmcsd_wait_cd_changed(RT_WAITING_FOREVER);
if (result == MMCSD_HOST_PLUGED)
{
rt_kprintf("mmcsd change pluged \n");
/* mount sdcard partition as / */
if (RT_EOK == sd_disk_try_mount(BSP_USING_SDCARD_PARTITION, "/", "elm", 0))
{
ram_disk_mount("/ram"); /* mount ramdisk if configured */
}
}
}
int filesystem_mount(void)
{
rt_thread_t tid;
tid = rt_thread_create("sd_filesytem", sd_filesytem_task_entry,
RT_NULL,
4096,
RT_THREAD_PRIORITY_MAX - 2, 20);
if (tid != RT_NULL)
{
rt_thread_startup(tid);
}
else
{
LOG_E("create sd mount task error!");
}
return RT_EOK;
}
INIT_APP_EXPORT(filesystem_mount);
#else
static int filesystem_mount(void)
{
return ram_disk_mount("/"); /* mount ramdisk as / */
}
INIT_APP_EXPORT(filesystem_mount);
#endif // #ifdef BSP_USING_SDCARD_FATFS
#endif // #if defined(RT_USING_DFS)

50
bsp/phytium/aarch32/configs/e2000d_demo_rtsmart
View File

@ -78,7 +78,7 @@ CONFIG_RT_USING_HEAP=y
CONFIG_RT_USING_DEVICE=y
CONFIG_RT_USING_DEVICE_OPS=y
# CONFIG_RT_USING_INTERRUPT_INFO is not set
# CONFIG_RT_USING_THREADSAFE_PRINTF is not set
CONFIG_RT_USING_THREADSAFE_PRINTF=y
CONFIG_RT_USING_SCHED_THREAD_CTX=y
CONFIG_RT_USING_CONSOLE=y
CONFIG_RT_CONSOLEBUF_SIZE=256
@ -135,7 +135,6 @@ CONFIG_RT_USING_DFS=y
CONFIG_DFS_USING_POSIX=y
CONFIG_DFS_USING_WORKDIR=y
CONFIG_DFS_FD_MAX=16
# CONFIG_RT_USING_DFS_V1 is not set
CONFIG_RT_USING_DFS_V2=y
CONFIG_RT_USING_DFS_ELMFAT=y
@ -163,6 +162,7 @@ CONFIG_RT_DFS_ELM_MUTEX_TIMEOUT=3000
# CONFIG_RT_DFS_ELM_USE_EXFAT is not set
CONFIG_RT_USING_DFS_DEVFS=y
# CONFIG_RT_USING_DFS_ROMFS is not set
CONFIG_RT_USING_DFS_PTYFS=y
# CONFIG_RT_USING_DFS_CROMFS is not set
# CONFIG_RT_USING_DFS_TMPFS is not set
CONFIG_RT_USING_DFS_MQUEUE=y
@ -193,10 +193,8 @@ CONFIG_RT_USING_SERIAL_V1=y
# CONFIG_RT_USING_SERIAL_V2 is not set
CONFIG_RT_SERIAL_USING_DMA=y
CONFIG_RT_SERIAL_RB_BUFSZ=1024
CONFIG_RT_USING_TTY=y
# CONFIG_RT_TTY_DEBUG is not set
CONFIG_RT_USING_CAN=y
CONFIG_RT_CAN_USING_HDR=y
# CONFIG_RT_CAN_USING_HDR is not set
CONFIG_RT_CAN_USING_CANFD=y
# CONFIG_RT_USING_CPUTIME is not set
CONFIG_RT_USING_I2C=y
@ -421,10 +419,11 @@ CONFIG_LWP_CONSOLE_INPUT_BUFFER_SIZE=1024
CONFIG_LWP_TID_MAX_NR=64
CONFIG_LWP_ENABLE_ASID=y
CONFIG_RT_LWP_SHM_MAX_NR=64
# CONFIG_LWP_UNIX98_PTY is not set
CONFIG_RT_USING_LDSO=y
# CONFIG_ELF_DEBUG_ENABLE is not set
# CONFIG_ELF_LOAD_RANDOMIZE is not set
CONFIG_LWP_USING_TERMINAL=y
CONFIG_LWP_PTY_MAX_PARIS_LIMIT=64
#
# Memory management
@ -1246,13 +1245,13 @@ CONFIG_RT_USING_UART1=y
# CONFIG_RT_USING_UART2 is not set
# CONFIG_RT_USING_UART3 is not set
CONFIG_BSP_USING_SPI=y
# CONFIG_RT_USING_SPIM0 is not set
CONFIG_RT_USING_SPIM0=y
# CONFIG_RT_USING_SPIM1 is not set
CONFIG_RT_USING_SPIM2=y
# CONFIG_RT_USING_SPIM2 is not set
# CONFIG_RT_USING_SPIM3 is not set
CONFIG_BSP_USING_CAN=y
CONFIG_RT_USING_CANFD=y
CONFIG_RT_USING_FILTER=y
# CONFIG_RT_USING_CANFD is not set
# CONFIG_RT_USING_FILTER is not set
CONFIG_RT_USING_CAN0=y
CONFIG_RT_USING_CAN1=y
CONFIG_BSP_USING_GPIO=y
@ -1265,16 +1264,16 @@ CONFIG_RT_LWIP_PBUF_POOL_BUFSIZE=1700
CONFIG_BSP_USING_PWM=y
# CONFIG_RT_USING_PWM0 is not set
# CONFIG_RT_USING_PWM1 is not set
# CONFIG_RT_USING_PWM2 is not set
CONFIG_RT_USING_PWM2=y
# CONFIG_RT_USING_PWM3 is not set
# CONFIG_RT_USING_PWM4 is not set
# CONFIG_RT_USING_PWM5 is not set
CONFIG_RT_USING_PWM6=y
# CONFIG_RT_USING_PWM6 is not set
# CONFIG_RT_USING_PWM7 is not set
CONFIG_BSP_USING_I2C=y
CONFIG_I2C_USE_MIO=y
# CONFIG_RT_USING_MIO0 is not set
# CONFIG_RT_USING_MIO1 is not set
CONFIG_RT_USING_MIO0=y
CONFIG_RT_USING_MIO1=y
# CONFIG_RT_USING_MIO2 is not set
# CONFIG_RT_USING_MIO3 is not set
# CONFIG_RT_USING_MIO4 is not set
@ -1288,21 +1287,19 @@ CONFIG_I2C_USE_MIO=y
# CONFIG_RT_USING_MIO12 is not set
# CONFIG_RT_USING_MIO13 is not set
# CONFIG_RT_USING_MIO14 is not set
CONFIG_RT_USING_MIO15=y
CONFIG_I2C_USE_CONTROLLER=y
CONFIG_RT_USING_I2C0=y
# CONFIG_RT_USING_I2C1 is not set
# CONFIG_RT_USING_I2C2 is not set
# CONFIG_RT_USING_I2C3 is not set
# CONFIG_RT_USING_MIO15 is not set
# CONFIG_I2C_USE_CONTROLLER is not set
CONFIG_BSP_USING_SDIF=y
CONFIG_BSP_USING_SDCARD_FATFS=y
CONFIG_BSP_USING_SDCARD_PARTITION="sd0"
# CONFIG_USING_SDIF0 is not set
CONFIG_USING_SDIF0=y
# CONFIG_USE_SDIF0_TF is not set
CONFIG_USE_SDIF0_EMMC=y
CONFIG_USING_SDIF1=y
# CONFIG_USING_EMMC is not set
CONFIG_USE_SDIF1_TF=y
# CONFIG_USE_SDIF1_EMMC is not set
CONFIG_BSP_USING_DC=y
# CONFIG_RT_USING_DC_CHANNEL0 is not set
CONFIG_RT_USING_DC_CHANNEL1=y
CONFIG_RT_USING_DC_CHANNEL0=y
# CONFIG_RT_USING_DC_CHANNEL1 is not set
# CONFIG_BSP_USING_XHCI is not set
# CONFIG_BSP_USING_PUSB2 is not set
@ -1326,6 +1323,7 @@ CONFIG_TARGET_E2000D=y
# CONFIG_TARGET_E2000S is not set
# CONFIG_TARGET_FT2004 is not set
# CONFIG_TARGET_D2000 is not set
# CONFIG_TARGET_PD2308 is not set
CONFIG_SOC_NAME="e2000"
CONFIG_TARGET_TYPE_NAME="d"
CONFIG_SOC_CORE_NUM=2
@ -1334,7 +1332,6 @@ CONFIG_F32BIT_MEMORY_LENGTH=0x80000000
CONFIG_F64BIT_MEMORY_ADDRESS=0x2000000000
CONFIG_F64BIT_MEMORY_LENGTH=0x800000000
CONFIG_TARGET_E2000=y
# CONFIG_USE_SPINLOCK is not set
CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
# CONFIG_DEFAULT_DEBUG_PRINT_UART0 is not set
# CONFIG_DEFAULT_DEBUG_PRINT_UART2 is not set
@ -1358,6 +1355,7 @@ CONFIG_BOARD_NAME="demo"
# CONFIG_USE_TACHO_IOPAD is not set
# CONFIG_USE_UART_IOPAD is not set
# CONFIG_USE_THIRD_PARTY_IOPAD is not set
# CONFIG_FIREFLY_DEMO_BOARD is not set
# CONFIG_CUS_DEMO_BOARD is not set
#

23
bsp/phytium/aarch32/configs/e2000d_demo_rtsmart.h
View File

@ -53,6 +53,7 @@
#define RT_USING_HEAP
#define RT_USING_DEVICE
#define RT_USING_DEVICE_OPS
#define RT_USING_THREADSAFE_PRINTF
#define RT_USING_SCHED_THREAD_CTX
#define RT_USING_CONSOLE
#define RT_CONSOLEBUF_SIZE 256
@ -114,6 +115,7 @@
#define RT_DFS_ELM_REENTRANT
#define RT_DFS_ELM_MUTEX_TIMEOUT 3000
#define RT_USING_DFS_DEVFS
#define RT_USING_DFS_PTYFS
#define RT_USING_DFS_MQUEUE
#define RT_USING_PAGECACHE
@ -137,9 +139,7 @@
#define RT_USING_SERIAL_V1
#define RT_SERIAL_USING_DMA
#define RT_SERIAL_RB_BUFSZ 1024
#define RT_USING_TTY
#define RT_USING_CAN
#define RT_CAN_USING_HDR
#define RT_CAN_USING_CANFD
#define RT_USING_I2C
#define RT_USING_I2C_BITOPS
@ -282,6 +282,8 @@
#define LWP_ENABLE_ASID
#define RT_LWP_SHM_MAX_NR 64
#define RT_USING_LDSO
#define LWP_USING_TERMINAL
#define LWP_PTY_MAX_PARIS_LIMIT 64
/* Memory management */
@ -421,10 +423,8 @@
#define RT_USING_UART0
#define RT_USING_UART1
#define BSP_USING_SPI
#define RT_USING_SPIM2
#define RT_USING_SPIM0
#define BSP_USING_CAN
#define RT_USING_CANFD
#define RT_USING_FILTER
#define RT_USING_CAN0
#define RT_USING_CAN1
#define BSP_USING_GPIO
@ -434,18 +434,19 @@
#define BSP_USING_ETH
#define RT_LWIP_PBUF_POOL_BUFSIZE 1700
#define BSP_USING_PWM
#define RT_USING_PWM6
#define RT_USING_PWM2
#define BSP_USING_I2C
#define I2C_USE_MIO
#define RT_USING_MIO15
#define I2C_USE_CONTROLLER
#define RT_USING_I2C0
#define RT_USING_MIO0
#define RT_USING_MIO1
#define BSP_USING_SDIF
#define BSP_USING_SDCARD_FATFS
#define BSP_USING_SDCARD_PARTITION "sd0"
#define USING_SDIF0
#define USE_SDIF0_EMMC
#define USING_SDIF1
#define USE_SDIF1_TF
#define BSP_USING_DC
#define RT_USING_DC_CHANNEL1
#define RT_USING_DC_CHANNEL0
/* Board extended module Drivers */

43
bsp/phytium/aarch32/configs/e2000d_demo_rtthread
View File

@ -186,7 +186,7 @@ CONFIG_RT_USING_SERIAL_V1=y
CONFIG_RT_SERIAL_USING_DMA=y
CONFIG_RT_SERIAL_RB_BUFSZ=1024
CONFIG_RT_USING_CAN=y
CONFIG_RT_CAN_USING_HDR=y
# CONFIG_RT_CAN_USING_HDR is not set
CONFIG_RT_CAN_USING_CANFD=y
# CONFIG_RT_USING_CPUTIME is not set
CONFIG_RT_USING_I2C=y
@ -1215,15 +1215,15 @@ CONFIG_RT_USING_UART1=y
# CONFIG_RT_USING_UART2 is not set
# CONFIG_RT_USING_UART3 is not set
CONFIG_BSP_USING_SPI=y
# CONFIG_RT_USING_SPIM0 is not set
CONFIG_RT_USING_SPIM0=y
# CONFIG_RT_USING_SPIM1 is not set
CONFIG_RT_USING_SPIM2=y
# CONFIG_RT_USING_SPIM2 is not set
# CONFIG_RT_USING_SPIM3 is not set
CONFIG_BSP_USING_CAN=y
CONFIG_RT_USING_CANFD=y
CONFIG_RT_USING_FILTER=y
CONFIG_RT_USING_CAN0=y
CONFIG_RT_USING_CAN1=y
# CONFIG_RT_USING_CANFD is not set
# CONFIG_RT_USING_FILTER is not set
# CONFIG_RT_USING_CAN0 is not set
# CONFIG_RT_USING_CAN1 is not set
CONFIG_BSP_USING_GPIO=y
CONFIG_BSP_USING_QSPI=y
CONFIG_RT_USING_QSPI0=y
@ -1234,16 +1234,16 @@ CONFIG_RT_LWIP_PBUF_POOL_BUFSIZE=1700
CONFIG_BSP_USING_PWM=y
# CONFIG_RT_USING_PWM0 is not set
# CONFIG_RT_USING_PWM1 is not set
# CONFIG_RT_USING_PWM2 is not set
CONFIG_RT_USING_PWM2=y
# CONFIG_RT_USING_PWM3 is not set
# CONFIG_RT_USING_PWM4 is not set
# CONFIG_RT_USING_PWM5 is not set
CONFIG_RT_USING_PWM6=y
# CONFIG_RT_USING_PWM6 is not set
# CONFIG_RT_USING_PWM7 is not set
CONFIG_BSP_USING_I2C=y
CONFIG_I2C_USE_MIO=y
# CONFIG_RT_USING_MIO0 is not set
# CONFIG_RT_USING_MIO1 is not set
CONFIG_RT_USING_MIO0=y
CONFIG_RT_USING_MIO1=y
# CONFIG_RT_USING_MIO2 is not set
# CONFIG_RT_USING_MIO3 is not set
# CONFIG_RT_USING_MIO4 is not set
@ -1257,20 +1257,18 @@ CONFIG_I2C_USE_MIO=y
# CONFIG_RT_USING_MIO12 is not set
# CONFIG_RT_USING_MIO13 is not set
# CONFIG_RT_USING_MIO14 is not set
CONFIG_RT_USING_MIO15=y
CONFIG_I2C_USE_CONTROLLER=y
CONFIG_RT_USING_I2C0=y
# CONFIG_RT_USING_I2C1 is not set
# CONFIG_RT_USING_I2C2 is not set
# CONFIG_RT_USING_I2C3 is not set
# CONFIG_RT_USING_MIO15 is not set
# CONFIG_I2C_USE_CONTROLLER is not set
CONFIG_BSP_USING_SDIF=y
CONFIG_BSP_USING_SDCARD_FATFS=y
CONFIG_BSP_USING_SDCARD_PARTITION="sd0"
# CONFIG_USING_SDIF0 is not set
CONFIG_USING_SDIF0=y
# CONFIG_USE_SDIF0_TF is not set
CONFIG_USE_SDIF0_EMMC=y
CONFIG_USING_SDIF1=y
# CONFIG_USING_EMMC is not set
CONFIG_USE_SDIF1_TF=y
# CONFIG_USE_SDIF1_EMMC is not set
CONFIG_BSP_USING_DC=y
# CONFIG_RT_USING_DC_CHANNEL0 is not set
CONFIG_RT_USING_DC_CHANNEL0=y
CONFIG_RT_USING_DC_CHANNEL1=y
# CONFIG_BSP_USING_XHCI is not set
# CONFIG_BSP_USING_PUSB2 is not set
@ -1295,6 +1293,7 @@ CONFIG_TARGET_E2000D=y
# CONFIG_TARGET_E2000S is not set
# CONFIG_TARGET_FT2004 is not set
# CONFIG_TARGET_D2000 is not set
# CONFIG_TARGET_PD2308 is not set
CONFIG_SOC_NAME="e2000"
CONFIG_TARGET_TYPE_NAME="d"
CONFIG_SOC_CORE_NUM=2
@ -1303,7 +1302,6 @@ CONFIG_F32BIT_MEMORY_LENGTH=0x80000000
CONFIG_F64BIT_MEMORY_ADDRESS=0x2000000000
CONFIG_F64BIT_MEMORY_LENGTH=0x800000000
CONFIG_TARGET_E2000=y
# CONFIG_USE_SPINLOCK is not set
CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
# CONFIG_DEFAULT_DEBUG_PRINT_UART0 is not set
# CONFIG_DEFAULT_DEBUG_PRINT_UART2 is not set
@ -1327,6 +1325,7 @@ CONFIG_BOARD_NAME="demo"
# CONFIG_USE_TACHO_IOPAD is not set
# CONFIG_USE_UART_IOPAD is not set
# CONFIG_USE_THIRD_PARTY_IOPAD is not set
# CONFIG_E2000Q_DEMO_BOARD is not set
# CONFIG_CUS_DEMO_BOARD is not set
#

19
bsp/phytium/aarch32/configs/e2000d_demo_rtthread.h
View File

@ -127,7 +127,6 @@
#define RT_SERIAL_USING_DMA
#define RT_SERIAL_RB_BUFSZ 1024
#define RT_USING_CAN
#define RT_CAN_USING_HDR
#define RT_CAN_USING_CANFD
#define RT_USING_I2C
#define RT_USING_I2C_BITOPS
@ -394,12 +393,8 @@
#define RT_USING_UART0
#define RT_USING_UART1
#define BSP_USING_SPI
#define RT_USING_SPIM2
#define RT_USING_SPIM0
#define BSP_USING_CAN
#define RT_USING_CANFD
#define RT_USING_FILTER
#define RT_USING_CAN0
#define RT_USING_CAN1
#define BSP_USING_GPIO
#define BSP_USING_QSPI
#define RT_USING_QSPI0
@ -407,17 +402,19 @@
#define BSP_USING_ETH
#define RT_LWIP_PBUF_POOL_BUFSIZE 1700
#define BSP_USING_PWM
#define RT_USING_PWM6
#define RT_USING_PWM2
#define BSP_USING_I2C
#define I2C_USE_MIO
#define RT_USING_MIO15
#define I2C_USE_CONTROLLER
#define RT_USING_I2C0
#define RT_USING_MIO0
#define RT_USING_MIO1
#define BSP_USING_SDIF
#define BSP_USING_SDCARD_FATFS
#define BSP_USING_SDCARD_PARTITION "sd0"
#define USING_SDIF0
#define USE_SDIF0_EMMC
#define USING_SDIF1
#define USE_SDIF1_TF
#define BSP_USING_DC
#define RT_USING_DC_CHANNEL0
#define RT_USING_DC_CHANNEL1
/* Board extended module Drivers */

29
bsp/phytium/aarch32/configs/e2000q_demo_rtsmart
View File

@ -162,6 +162,7 @@ CONFIG_RT_DFS_ELM_MUTEX_TIMEOUT=3000
# CONFIG_RT_DFS_ELM_USE_EXFAT is not set
CONFIG_RT_USING_DFS_DEVFS=y
# CONFIG_RT_USING_DFS_ROMFS is not set
CONFIG_RT_USING_DFS_PTYFS=y
# CONFIG_RT_USING_DFS_CROMFS is not set
# CONFIG_RT_USING_DFS_TMPFS is not set
CONFIG_RT_USING_DFS_MQUEUE=y
@ -192,8 +193,6 @@ CONFIG_RT_USING_SERIAL_V1=y
# CONFIG_RT_USING_SERIAL_V2 is not set
CONFIG_RT_SERIAL_USING_DMA=y
CONFIG_RT_SERIAL_RB_BUFSZ=1024
CONFIG_RT_USING_TTY=y
# CONFIG_RT_TTY_DEBUG is not set
CONFIG_RT_USING_CAN=y
# CONFIG_RT_CAN_USING_HDR is not set
CONFIG_RT_CAN_USING_CANFD=y
@ -420,10 +419,11 @@ CONFIG_LWP_CONSOLE_INPUT_BUFFER_SIZE=1024
CONFIG_LWP_TID_MAX_NR=64
CONFIG_LWP_ENABLE_ASID=y
CONFIG_RT_LWP_SHM_MAX_NR=64
# CONFIG_LWP_UNIX98_PTY is not set
CONFIG_RT_USING_LDSO=y
# CONFIG_ELF_DEBUG_ENABLE is not set
# CONFIG_ELF_LOAD_RANDOMIZE is not set
CONFIG_LWP_USING_TERMINAL=y
CONFIG_LWP_PTY_MAX_PARIS_LIMIT=64
#
# Memory management
@ -1249,9 +1249,16 @@ CONFIG_RT_USING_SPIM0=y
# CONFIG_RT_USING_SPIM1 is not set
# CONFIG_RT_USING_SPIM2 is not set
# CONFIG_RT_USING_SPIM3 is not set
# CONFIG_BSP_USING_CAN is not set
CONFIG_BSP_USING_CAN=y
# CONFIG_RT_USING_CANFD is not set
# CONFIG_RT_USING_FILTER is not set
CONFIG_RT_USING_CAN0=y
CONFIG_RT_USING_CAN1=y
CONFIG_BSP_USING_GPIO=y
# CONFIG_BSP_USING_QSPI is not set
CONFIG_BSP_USING_QSPI=y
CONFIG_RT_USING_QSPI0=y
CONFIG_USING_QSPI_CHANNEL0=y
# CONFIG_USING_QSPI_CHANNEL1 is not set
CONFIG_BSP_USING_ETH=y
CONFIG_RT_LWIP_PBUF_POOL_BUFSIZE=1700
CONFIG_BSP_USING_PWM=y
@ -1282,7 +1289,14 @@ CONFIG_RT_USING_MIO1=y
# CONFIG_RT_USING_MIO14 is not set
# CONFIG_RT_USING_MIO15 is not set
# CONFIG_I2C_USE_CONTROLLER is not set
# CONFIG_BSP_USING_SDIF is not set
CONFIG_BSP_USING_SDIF=y
CONFIG_BSP_USING_SDCARD_FATFS=y
CONFIG_USING_SDIF0=y
# CONFIG_USE_SDIF0_TF is not set
CONFIG_USE_SDIF0_EMMC=y
CONFIG_USING_SDIF1=y
CONFIG_USE_SDIF1_TF=y
# CONFIG_USE_SDIF1_EMMC is not set
CONFIG_BSP_USING_DC=y
CONFIG_RT_USING_DC_CHANNEL0=y
# CONFIG_RT_USING_DC_CHANNEL1 is not set
@ -1309,6 +1323,7 @@ CONFIG_TARGET_E2000Q=y
# CONFIG_TARGET_E2000S is not set
# CONFIG_TARGET_FT2004 is not set
# CONFIG_TARGET_D2000 is not set
# CONFIG_TARGET_PD2308 is not set
CONFIG_SOC_NAME="e2000"
CONFIG_TARGET_TYPE_NAME="q"
CONFIG_SOC_CORE_NUM=4
@ -1317,7 +1332,6 @@ CONFIG_F32BIT_MEMORY_LENGTH=0x80000000
CONFIG_F64BIT_MEMORY_ADDRESS=0x2000000000
CONFIG_F64BIT_MEMORY_LENGTH=0x800000000
CONFIG_TARGET_E2000=y
# CONFIG_USE_SPINLOCK is not set
CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
# CONFIG_DEFAULT_DEBUG_PRINT_UART0 is not set
# CONFIG_DEFAULT_DEBUG_PRINT_UART2 is not set
@ -1340,7 +1354,6 @@ CONFIG_E2000Q_DEMO_BOARD=y
#
# IO mux configuration when board start up
#
# CONFIG_FIREFLY_DEMO_BOARD is not set
# CONFIG_CUS_DEMO_BOARD is not set
#

16
bsp/phytium/aarch32/configs/e2000q_demo_rtsmart.h
View File

@ -115,6 +115,7 @@
#define RT_DFS_ELM_REENTRANT
#define RT_DFS_ELM_MUTEX_TIMEOUT 3000
#define RT_USING_DFS_DEVFS
#define RT_USING_DFS_PTYFS
#define RT_USING_DFS_MQUEUE
#define RT_USING_PAGECACHE
@ -138,7 +139,6 @@
#define RT_USING_SERIAL_V1
#define RT_SERIAL_USING_DMA
#define RT_SERIAL_RB_BUFSZ 1024
#define RT_USING_TTY
#define RT_USING_CAN
#define RT_CAN_USING_CANFD
#define RT_USING_I2C
@ -282,6 +282,8 @@
#define LWP_ENABLE_ASID
#define RT_LWP_SHM_MAX_NR 64
#define RT_USING_LDSO
#define LWP_USING_TERMINAL
#define LWP_PTY_MAX_PARIS_LIMIT 64
/* Memory management */
@ -422,7 +424,13 @@
#define RT_USING_UART1
#define BSP_USING_SPI
#define RT_USING_SPIM0
#define BSP_USING_CAN
#define RT_USING_CAN0
#define RT_USING_CAN1
#define BSP_USING_GPIO
#define BSP_USING_QSPI
#define RT_USING_QSPI0
#define USING_QSPI_CHANNEL0
#define BSP_USING_ETH
#define RT_LWIP_PBUF_POOL_BUFSIZE 1700
#define BSP_USING_PWM
@ -431,6 +439,12 @@
#define I2C_USE_MIO
#define RT_USING_MIO0
#define RT_USING_MIO1
#define BSP_USING_SDIF
#define BSP_USING_SDCARD_FATFS
#define USING_SDIF0
#define USE_SDIF0_EMMC
#define USING_SDIF1
#define USE_SDIF1_TF
#define BSP_USING_DC
#define RT_USING_DC_CHANNEL0

25
bsp/phytium/aarch32/configs/e2000q_demo_rtthread
View File

@ -1219,9 +1219,16 @@ CONFIG_RT_USING_SPIM0=y
# CONFIG_RT_USING_SPIM1 is not set
# CONFIG_RT_USING_SPIM2 is not set
# CONFIG_RT_USING_SPIM3 is not set
# CONFIG_BSP_USING_CAN is not set
CONFIG_BSP_USING_CAN=y
# CONFIG_RT_USING_CANFD is not set
# CONFIG_RT_USING_FILTER is not set
# CONFIG_RT_USING_CAN0 is not set
# CONFIG_RT_USING_CAN1 is not set
CONFIG_BSP_USING_GPIO=y
# CONFIG_BSP_USING_QSPI is not set
CONFIG_BSP_USING_QSPI=y
CONFIG_RT_USING_QSPI0=y
CONFIG_USING_QSPI_CHANNEL0=y
# CONFIG_USING_QSPI_CHANNEL1 is not set
CONFIG_BSP_USING_ETH=y
CONFIG_RT_LWIP_PBUF_POOL_BUFSIZE=1700
CONFIG_BSP_USING_PWM=y
@ -1252,10 +1259,17 @@ CONFIG_RT_USING_MIO1=y
# CONFIG_RT_USING_MIO14 is not set
# CONFIG_RT_USING_MIO15 is not set
# CONFIG_I2C_USE_CONTROLLER is not set
# CONFIG_BSP_USING_SDIF is not set
CONFIG_BSP_USING_SDIF=y
CONFIG_BSP_USING_SDCARD_FATFS=y
CONFIG_USING_SDIF0=y
# CONFIG_USE_SDIF0_TF is not set
CONFIG_USE_SDIF0_EMMC=y
CONFIG_USING_SDIF1=y
CONFIG_USE_SDIF1_TF=y
# CONFIG_USE_SDIF1_EMMC is not set
CONFIG_BSP_USING_DC=y
CONFIG_RT_USING_DC_CHANNEL0=y
# CONFIG_RT_USING_DC_CHANNEL1 is not set
CONFIG_RT_USING_DC_CHANNEL1=y
# CONFIG_BSP_USING_XHCI is not set
# CONFIG_BSP_USING_PUSB2 is not set
@ -1279,6 +1293,7 @@ CONFIG_TARGET_E2000Q=y
# CONFIG_TARGET_E2000S is not set
# CONFIG_TARGET_FT2004 is not set
# CONFIG_TARGET_D2000 is not set
# CONFIG_TARGET_PD2308 is not set
CONFIG_SOC_NAME="e2000"
CONFIG_TARGET_TYPE_NAME="q"
CONFIG_SOC_CORE_NUM=4
@ -1287,7 +1302,6 @@ CONFIG_F32BIT_MEMORY_LENGTH=0x80000000
CONFIG_F64BIT_MEMORY_ADDRESS=0x2000000000
CONFIG_F64BIT_MEMORY_LENGTH=0x800000000
CONFIG_TARGET_E2000=y
# CONFIG_USE_SPINLOCK is not set
CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
# CONFIG_DEFAULT_DEBUG_PRINT_UART0 is not set
# CONFIG_DEFAULT_DEBUG_PRINT_UART2 is not set
@ -1310,7 +1324,6 @@ CONFIG_E2000Q_DEMO_BOARD=y
#
# IO mux configuration when board start up
#
# CONFIG_FIREFLY_DEMO_BOARD is not set
# CONFIG_CUS_DEMO_BOARD is not set
#

11
bsp/phytium/aarch32/configs/e2000q_demo_rtthread.h
View File

@ -394,7 +394,11 @@
#define RT_USING_UART1
#define BSP_USING_SPI
#define RT_USING_SPIM0
#define BSP_USING_CAN
#define BSP_USING_GPIO
#define BSP_USING_QSPI
#define RT_USING_QSPI0
#define USING_QSPI_CHANNEL0
#define BSP_USING_ETH
#define RT_LWIP_PBUF_POOL_BUFSIZE 1700
#define BSP_USING_PWM
@ -403,8 +407,15 @@
#define I2C_USE_MIO
#define RT_USING_MIO0
#define RT_USING_MIO1
#define BSP_USING_SDIF
#define BSP_USING_SDCARD_FATFS
#define USING_SDIF0
#define USE_SDIF0_EMMC
#define USING_SDIF1
#define USE_SDIF1_TF
#define BSP_USING_DC
#define RT_USING_DC_CHANNEL0
#define RT_USING_DC_CHANNEL1
/* Board extended module Drivers */

28
bsp/phytium/aarch32/configs/phytium_pi_rtsmart
View File

@ -162,6 +162,7 @@ CONFIG_RT_DFS_ELM_MUTEX_TIMEOUT=3000
# CONFIG_RT_DFS_ELM_USE_EXFAT is not set
CONFIG_RT_USING_DFS_DEVFS=y
# CONFIG_RT_USING_DFS_ROMFS is not set
CONFIG_RT_USING_DFS_PTYFS=y
# CONFIG_RT_USING_DFS_CROMFS is not set
# CONFIG_RT_USING_DFS_TMPFS is not set
CONFIG_RT_USING_DFS_MQUEUE=y
@ -192,8 +193,6 @@ CONFIG_RT_USING_SERIAL_V1=y
# CONFIG_RT_USING_SERIAL_V2 is not set
CONFIG_RT_SERIAL_USING_DMA=y
CONFIG_RT_SERIAL_RB_BUFSZ=1024
CONFIG_RT_USING_TTY=y
# CONFIG_RT_TTY_DEBUG is not set
CONFIG_RT_USING_CAN=y
# CONFIG_RT_CAN_USING_HDR is not set
CONFIG_RT_CAN_USING_CANFD=y
@ -420,10 +419,11 @@ CONFIG_LWP_CONSOLE_INPUT_BUFFER_SIZE=1024
CONFIG_LWP_TID_MAX_NR=64
CONFIG_LWP_ENABLE_ASID=y
CONFIG_RT_LWP_SHM_MAX_NR=64
# CONFIG_LWP_UNIX98_PTY is not set
CONFIG_RT_USING_LDSO=y
# CONFIG_ELF_DEBUG_ENABLE is not set
# CONFIG_ELF_LOAD_RANDOMIZE is not set
CONFIG_LWP_USING_TERMINAL=y
CONFIG_LWP_PTY_MAX_PARIS_LIMIT=64
#
# Memory management
@ -1249,9 +1249,16 @@ CONFIG_RT_USING_SPIM0=y
# CONFIG_RT_USING_SPIM1 is not set
# CONFIG_RT_USING_SPIM2 is not set
# CONFIG_RT_USING_SPIM3 is not set
# CONFIG_BSP_USING_CAN is not set
CONFIG_BSP_USING_CAN=y
# CONFIG_RT_USING_CANFD is not set
# CONFIG_RT_USING_FILTER is not set
CONFIG_RT_USING_CAN0=y
CONFIG_RT_USING_CAN1=y
CONFIG_BSP_USING_GPIO=y
# CONFIG_BSP_USING_QSPI is not set
CONFIG_BSP_USING_QSPI=y
CONFIG_RT_USING_QSPI0=y
CONFIG_USING_QSPI_CHANNEL0=y
# CONFIG_USING_QSPI_CHANNEL1 is not set
CONFIG_BSP_USING_ETH=y
CONFIG_RT_LWIP_PBUF_POOL_BUFSIZE=1700
CONFIG_BSP_USING_PWM=y
@ -1282,7 +1289,14 @@ CONFIG_RT_USING_MIO1=y
# CONFIG_RT_USING_MIO14 is not set
# CONFIG_RT_USING_MIO15 is not set
# CONFIG_I2C_USE_CONTROLLER is not set
# CONFIG_BSP_USING_SDIF is not set
CONFIG_BSP_USING_SDIF=y
CONFIG_BSP_USING_SDCARD_FATFS=y
# CONFIG_USING_SDIF0 is not set
# CONFIG_USE_SDIF0_TF is not set
# CONFIG_USE_SDIF0_EMMC is not set
CONFIG_USING_SDIF1=y
CONFIG_USE_SDIF1_TF=y
# CONFIG_USE_SDIF1_EMMC is not set
CONFIG_BSP_USING_DC=y
CONFIG_RT_USING_DC_CHANNEL0=y
# CONFIG_RT_USING_DC_CHANNEL1 is not set
@ -1309,6 +1323,7 @@ CONFIG_TARGET_PHYTIUMPI=y
# CONFIG_TARGET_E2000S is not set
# CONFIG_TARGET_FT2004 is not set
# CONFIG_TARGET_D2000 is not set
# CONFIG_TARGET_PD2308 is not set
CONFIG_SOC_NAME="phytiumpi"
CONFIG_SOC_CORE_NUM=4
CONFIG_F32BIT_MEMORY_ADDRESS=0x80000000
@ -1316,7 +1331,6 @@ CONFIG_F32BIT_MEMORY_LENGTH=0x80000000
CONFIG_F64BIT_MEMORY_ADDRESS=0x2000000000
CONFIG_F64BIT_MEMORY_LENGTH=0x800000000
CONFIG_TARGET_E2000=y
# CONFIG_USE_SPINLOCK is not set
CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
# CONFIG_DEFAULT_DEBUG_PRINT_UART0 is not set
# CONFIG_DEFAULT_DEBUG_PRINT_UART2 is not set

14
bsp/phytium/aarch32/configs/phytium_pi_rtsmart.h
View File

@ -115,6 +115,7 @@
#define RT_DFS_ELM_REENTRANT
#define RT_DFS_ELM_MUTEX_TIMEOUT 3000
#define RT_USING_DFS_DEVFS
#define RT_USING_DFS_PTYFS
#define RT_USING_DFS_MQUEUE
#define RT_USING_PAGECACHE
@ -138,7 +139,6 @@
#define RT_USING_SERIAL_V1
#define RT_SERIAL_USING_DMA
#define RT_SERIAL_RB_BUFSZ 1024
#define RT_USING_TTY
#define RT_USING_CAN
#define RT_CAN_USING_CANFD
#define RT_USING_I2C
@ -282,6 +282,8 @@
#define LWP_ENABLE_ASID
#define RT_LWP_SHM_MAX_NR 64
#define RT_USING_LDSO
#define LWP_USING_TERMINAL
#define LWP_PTY_MAX_PARIS_LIMIT 64
/* Memory management */
@ -422,7 +424,13 @@
#define RT_USING_UART1
#define BSP_USING_SPI
#define RT_USING_SPIM0
#define BSP_USING_CAN
#define RT_USING_CAN0
#define RT_USING_CAN1
#define BSP_USING_GPIO
#define BSP_USING_QSPI
#define RT_USING_QSPI0
#define USING_QSPI_CHANNEL0
#define BSP_USING_ETH
#define RT_LWIP_PBUF_POOL_BUFSIZE 1700
#define BSP_USING_PWM
@ -431,6 +439,10 @@
#define I2C_USE_MIO
#define RT_USING_MIO0
#define RT_USING_MIO1
#define BSP_USING_SDIF
#define BSP_USING_SDCARD_FATFS
#define USING_SDIF1
#define USE_SDIF1_TF
#define BSP_USING_DC
#define RT_USING_DC_CHANNEL0

25
bsp/phytium/aarch32/configs/phytium_pi_rtthread
View File

@ -1219,9 +1219,16 @@ CONFIG_RT_USING_SPIM0=y
# CONFIG_RT_USING_SPIM1 is not set
# CONFIG_RT_USING_SPIM2 is not set
# CONFIG_RT_USING_SPIM3 is not set
# CONFIG_BSP_USING_CAN is not set
CONFIG_BSP_USING_CAN=y
# CONFIG_RT_USING_CANFD is not set
# CONFIG_RT_USING_FILTER is not set
# CONFIG_RT_USING_CAN0 is not set
# CONFIG_RT_USING_CAN1 is not set
CONFIG_BSP_USING_GPIO=y
# CONFIG_BSP_USING_QSPI is not set
CONFIG_BSP_USING_QSPI=y
CONFIG_RT_USING_QSPI0=y
CONFIG_USING_QSPI_CHANNEL0=y
# CONFIG_USING_QSPI_CHANNEL1 is not set
CONFIG_BSP_USING_ETH=y
CONFIG_RT_LWIP_PBUF_POOL_BUFSIZE=1700
CONFIG_BSP_USING_PWM=y
@ -1252,10 +1259,17 @@ CONFIG_RT_USING_MIO1=y
# CONFIG_RT_USING_MIO14 is not set
# CONFIG_RT_USING_MIO15 is not set
# CONFIG_I2C_USE_CONTROLLER is not set
# CONFIG_BSP_USING_SDIF is not set
CONFIG_BSP_USING_SDIF=y
CONFIG_BSP_USING_SDCARD_FATFS=y
# CONFIG_USING_SDIF0 is not set
# CONFIG_USE_SDIF0_TF is not set
# CONFIG_USE_SDIF0_EMMC is not set
CONFIG_USING_SDIF1=y
CONFIG_USE_SDIF1_TF=y
# CONFIG_USE_SDIF1_EMMC is not set
CONFIG_BSP_USING_DC=y
CONFIG_RT_USING_DC_CHANNEL0=y
# CONFIG_RT_USING_DC_CHANNEL1 is not set
CONFIG_RT_USING_DC_CHANNEL1=y
# CONFIG_BSP_USING_XHCI is not set
# CONFIG_BSP_USING_PUSB2 is not set
@ -1279,6 +1293,7 @@ CONFIG_TARGET_PHYTIUMPI=y
# CONFIG_TARGET_E2000S is not set
# CONFIG_TARGET_FT2004 is not set
# CONFIG_TARGET_D2000 is not set
# CONFIG_TARGET_PD2308 is not set
CONFIG_SOC_NAME="phytiumpi"
CONFIG_SOC_CORE_NUM=4
CONFIG_F32BIT_MEMORY_ADDRESS=0x80000000
@ -1286,7 +1301,6 @@ CONFIG_F32BIT_MEMORY_LENGTH=0x80000000
CONFIG_F64BIT_MEMORY_ADDRESS=0x2000000000
CONFIG_F64BIT_MEMORY_LENGTH=0x800000000
CONFIG_TARGET_E2000=y
# CONFIG_USE_SPINLOCK is not set
CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
# CONFIG_DEFAULT_DEBUG_PRINT_UART0 is not set
# CONFIG_DEFAULT_DEBUG_PRINT_UART2 is not set
@ -1294,6 +1308,7 @@ CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
#
# Board Configuration
#
# CONFIG_E2000D_DEMO_BOARD is not set
CONFIG_BOARD_NAME="firefly"
# CONFIG_USE_SPI_IOPAD is not set
# CONFIG_USE_GPIO_IOPAD is not set

9
bsp/phytium/aarch32/configs/phytium_pi_rtthread.h
View File

@ -394,7 +394,11 @@
#define RT_USING_UART1
#define BSP_USING_SPI
#define RT_USING_SPIM0
#define BSP_USING_CAN
#define BSP_USING_GPIO
#define BSP_USING_QSPI
#define RT_USING_QSPI0
#define USING_QSPI_CHANNEL0
#define BSP_USING_ETH
#define RT_LWIP_PBUF_POOL_BUFSIZE 1700
#define BSP_USING_PWM
@ -403,8 +407,13 @@
#define I2C_USE_MIO
#define RT_USING_MIO0
#define RT_USING_MIO1
#define BSP_USING_SDIF
#define BSP_USING_SDCARD_FATFS
#define USING_SDIF1
#define USE_SDIF1_TF
#define BSP_USING_DC
#define RT_USING_DC_CHANNEL0
#define RT_USING_DC_CHANNEL1
/* Board extended module Drivers */

9
bsp/phytium/aarch32/rtconfig.h
View File

@ -394,7 +394,11 @@
#define RT_USING_UART1
#define BSP_USING_SPI
#define RT_USING_SPIM0
#define BSP_USING_CAN
#define BSP_USING_GPIO
#define BSP_USING_QSPI
#define RT_USING_QSPI0
#define USING_QSPI_CHANNEL0
#define BSP_USING_ETH
#define RT_LWIP_PBUF_POOL_BUFSIZE 1700
#define BSP_USING_PWM
@ -403,8 +407,13 @@
#define I2C_USE_MIO
#define RT_USING_MIO0
#define RT_USING_MIO1
#define BSP_USING_SDIF
#define BSP_USING_SDCARD_FATFS
#define USING_SDIF1
#define USE_SDIF1_TF
#define BSP_USING_DC
#define RT_USING_DC_CHANNEL0
#define RT_USING_DC_CHANNEL1
/* Board extended module Drivers */

9
bsp/phytium/aarch64/.config
View File

@ -1279,7 +1279,12 @@ CONFIG_RT_USING_MIO10=y
# CONFIG_RT_USING_MIO14 is not set
# CONFIG_RT_USING_MIO15 is not set
# CONFIG_I2C_USE_CONTROLLER is not set
# CONFIG_BSP_USING_SDIF is not set
CONFIG_BSP_USING_SDIF=y
CONFIG_BSP_USING_SDCARD_FATFS=y
# CONFIG_USING_SDIF0 is not set
CONFIG_USING_SDIF1=y
CONFIG_USE_SDIF1_TF=y
# CONFIG_USE_SDIF1_EMMC is not set
CONFIG_BSP_USING_DC=y
# CONFIG_RT_USING_DC_CHANNEL0 is not set
# CONFIG_RT_USING_DC_CHANNEL1 is not set
@ -1308,6 +1313,7 @@ CONFIG_TARGET_PHYTIUMPI=y
# CONFIG_TARGET_E2000S is not set
# CONFIG_TARGET_FT2004 is not set
# CONFIG_TARGET_D2000 is not set
# CONFIG_TARGET_PD2308 is not set
CONFIG_SOC_NAME="phytiumpi"
CONFIG_SOC_CORE_NUM=4
CONFIG_F32BIT_MEMORY_ADDRESS=0x80000000
@ -1315,7 +1321,6 @@ CONFIG_F32BIT_MEMORY_LENGTH=0x80000000
CONFIG_F64BIT_MEMORY_ADDRESS=0x2000000000
CONFIG_F64BIT_MEMORY_LENGTH=0x800000000
CONFIG_TARGET_E2000=y
# CONFIG_USE_SPINLOCK is not set
CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
# CONFIG_DEFAULT_DEBUG_PRINT_UART0 is not set
# CONFIG_DEFAULT_DEBUG_PRINT_UART2 is not set

142
bsp/phytium/aarch64/applications/mnt.c
View File

@ -1,142 +0,0 @@
/*
* Copyright (c) 2006-2023, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Email: opensource_embedded@phytium.com.cn
*
* Change Logs:
* Date Author Notes
* 2023-04-27 huanghe first version
* 2023-07-14 liqiaozhong add SD file sys mount func
*
*/
#include <rtthread.h>
#if defined(RT_USING_DFS)
#include <rtdbg.h>
#include <dfs_fs.h>
#include <dfs_file.h>
static int ram_disk_mount(const char *mount_point)
{
#ifdef RT_USING_DFS_RAMFS
extern struct dfs_ramfs *dfs_ramfs_create(rt_uint8_t *pool, rt_size_t size);
rt_uint8_t *pool = RT_NULL;
rt_size_t size = 8 * 1024 * 1024;
rt_err_t err = RT_EOK;
pool = rt_malloc(size);
if (pool == RT_NULL)
{
LOG_E("Malloc fail!");
}
err = dfs_mount(RT_NULL, mount_point, "ram", 0, (const void *)dfs_ramfs_create(pool, size));
if (err == RT_EOK)
{
LOG_I("RAM file system initializated!");
}
else
{
LOG_E("RAM file system initializate failed!, err = %d", err);
}
#endif
return RT_EOK;
}
#ifdef BSP_USING_SDCARD_FATFS
extern void fsdif_change(void);
static int sd_disk_try_mount(char *device_name, char *mount_point, char *fs_type_name, int mkfs_count)
{
struct statfs fs_stat;
int rc = 0;
LOG_I("mount(\"%s\",\"%s\",\"%s\");", device_name, mount_point, fs_type_name);
if (rt_device_find(device_name) == NULL)
{
LOG_I("%s not find!!!", device_name);
return -RT_EIO;
}
mkdir(mount_point, 0);
_remount:
rc = dfs_mount(device_name, mount_point, fs_type_name, 0, 0);
if (rc == 0)
{
LOG_I("mounted %s on %s", device_name, mount_point);
if (dfs_statfs(mount_point, &fs_stat) >= 0)
{
LOG_I("%s size:%d, total: %d, free: %d", mount_point,
fs_stat.f_bsize, fs_stat.f_blocks, fs_stat.f_bfree);
}
}
else
{
if (mkfs_count > 0)
{
/* LOG_I("[%s]try mkfs -t %s %s ", mkfs_count, fs_type_name, device_name);
dfs_mkfs(fs_type_name, device_name); */
mkfs_count--;
LOG_E("%s is not in %s, please format first !!!", device_name, fs_type_name);
goto _remount;
}
LOG_I("mount failed :%d ", rc);
return -RT_EIO;
}
return RT_EOK;
}
static void sd_filesytem_task_entry(void *parameter)
{
int result;
LOG_D("sdio host change: %d", change);
mmcsd_wait_cd_changed(0); /* clear */
fsdif_change(); /* send cd change to host */
/* block until plug/unplug event happens */
result = mmcsd_wait_cd_changed(RT_WAITING_FOREVER);
if (result == MMCSD_HOST_PLUGED)
{
rt_kprintf("mmcsd change pluged \n");
/* mount sdcard partition as / */
if (RT_EOK == sd_disk_try_mount(BSP_USING_SDCARD_PARTITION, "/", "elm", 0))
{
ram_disk_mount("/ram"); /* mount ramdisk if configured */
}
}
}
int filesystem_mount(void)
{
rt_thread_t tid;
tid = rt_thread_create("sd_filesytem", sd_filesytem_task_entry,
RT_NULL,
4096,
RT_THREAD_PRIORITY_MAX - 2, 20);
if (tid != RT_NULL)
{
rt_thread_startup(tid);
}
else
{
LOG_E("create sd mount task error!");
}
return RT_EOK;
}
INIT_APP_EXPORT(filesystem_mount);
#else
static int filesystem_mount(void)
{
return ram_disk_mount("/"); /* mount ramdisk as / */
}
INIT_ENV_EXPORT(filesystem_mount);
#endif // #ifdef BSP_USING_SDCARD_FATFS
#endif // #if defined(RT_USING_DFS)

55
bsp/phytium/aarch64/configs/e2000d_demo_rtsmart
View File

@ -165,6 +165,7 @@ CONFIG_RT_DFS_ELM_MUTEX_TIMEOUT=3000
# CONFIG_RT_DFS_ELM_USE_EXFAT is not set
CONFIG_RT_USING_DFS_DEVFS=y
# CONFIG_RT_USING_DFS_ROMFS is not set
CONFIG_RT_USING_DFS_PTYFS=y
# CONFIG_RT_USING_DFS_CROMFS is not set
# CONFIG_RT_USING_DFS_TMPFS is not set
# CONFIG_RT_USING_DFS_MQUEUE is not set
@ -195,8 +196,6 @@ CONFIG_RT_USING_SERIAL_V1=y
# CONFIG_RT_USING_SERIAL_V2 is not set
CONFIG_RT_SERIAL_USING_DMA=y
CONFIG_RT_SERIAL_RB_BUFSZ=64
CONFIG_RT_USING_TTY=y
# CONFIG_RT_TTY_DEBUG is not set
CONFIG_RT_USING_CAN=y
CONFIG_RT_CAN_USING_HDR=y
CONFIG_RT_CAN_USING_CANFD=y
@ -385,7 +384,35 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_RT_LWIP_USING_HW_CHECKSUM is not set
CONFIG_RT_LWIP_USING_PING=y
# CONFIG_LWIP_USING_DHCPD is not set
# CONFIG_RT_LWIP_DEBUG is not set
CONFIG_RT_LWIP_DEBUG=y
# CONFIG_RT_LWIP_SYS_DEBUG is not set
# CONFIG_RT_LWIP_ETHARP_DEBUG is not set
# CONFIG_RT_LWIP_PPP_DEBUG is not set
# CONFIG_RT_LWIP_MEM_DEBUG is not set
# CONFIG_RT_LWIP_MEMP_DEBUG is not set
# CONFIG_RT_LWIP_PBUF_DEBUG is not set
# CONFIG_RT_LWIP_API_LIB_DEBUG is not set
# CONFIG_RT_LWIP_API_MSG_DEBUG is not set
# CONFIG_RT_LWIP_TCPIP_DEBUG is not set
CONFIG_RT_LWIP_NETIF_DEBUG=y
# CONFIG_RT_LWIP_SOCKETS_DEBUG is not set
# CONFIG_RT_LWIP_DNS_DEBUG is not set
# CONFIG_RT_LWIP_AUTOIP_DEBUG is not set
# CONFIG_RT_LWIP_DHCP_DEBUG is not set
# CONFIG_RT_LWIP_IP_DEBUG is not set
# CONFIG_RT_LWIP_IP_REASS_DEBUG is not set
# CONFIG_RT_LWIP_ICMP_DEBUG is not set
# CONFIG_RT_LWIP_IGMP_DEBUG is not set
# CONFIG_RT_LWIP_UDP_DEBUG is not set
# CONFIG_RT_LWIP_TCP_DEBUG is not set
# CONFIG_RT_LWIP_TCP_INPUT_DEBUG is not set
# CONFIG_RT_LWIP_TCP_OUTPUT_DEBUG is not set
# CONFIG_RT_LWIP_TCP_RTO_DEBUG is not set
# CONFIG_RT_LWIP_TCP_CWND_DEBUG is not set
# CONFIG_RT_LWIP_TCP_WND_DEBUG is not set
# CONFIG_RT_LWIP_TCP_FR_DEBUG is not set
# CONFIG_RT_LWIP_TCP_QLEN_DEBUG is not set
# CONFIG_RT_LWIP_TCP_RST_DEBUG is not set
# CONFIG_RT_USING_AT is not set
#
@ -419,10 +446,11 @@ CONFIG_RT_CH_MSG_MAX_NR=1024
CONFIG_LWP_CONSOLE_INPUT_BUFFER_SIZE=1024
CONFIG_LWP_TID_MAX_NR=64
CONFIG_RT_LWP_SHM_MAX_NR=64
# CONFIG_LWP_UNIX98_PTY is not set
CONFIG_RT_USING_LDSO=y
# CONFIG_ELF_DEBUG_ENABLE is not set
# CONFIG_ELF_LOAD_RANDOMIZE is not set
CONFIG_LWP_USING_TERMINAL=y
CONFIG_LWP_PTY_MAX_PARIS_LIMIT=64
#
# Memory management
@ -1273,9 +1301,9 @@ CONFIG_RT_USING_SPIM2=y
CONFIG_RT_USING_SPIM3=y
CONFIG_BSP_USING_CAN=y
CONFIG_RT_USING_CANFD=y
# CONFIG_RT_USING_FILTER is not set
CONFIG_RT_USING_FILTER=y
CONFIG_RT_USING_CAN0=y
# CONFIG_RT_USING_CAN1 is not set
CONFIG_RT_USING_CAN1=y
CONFIG_BSP_USING_GPIO=y
CONFIG_BSP_USING_QSPI=y
CONFIG_RT_USING_QSPI0=y
@ -1311,8 +1339,17 @@ CONFIG_I2C_USE_MIO=y
# CONFIG_RT_USING_MIO14 is not set
CONFIG_RT_USING_MIO15=y
# CONFIG_I2C_USE_CONTROLLER is not set
# CONFIG_BSP_USING_SDIF is not set
# CONFIG_BSP_USING_DC is not set
CONFIG_BSP_USING_SDIF=y
CONFIG_BSP_USING_SDCARD_FATFS=y
CONFIG_USING_SDIF0=y
# CONFIG_USE_SDIF0_TF is not set
CONFIG_USE_SDIF0_EMMC=y
CONFIG_USING_SDIF1=y
CONFIG_USE_SDIF1_TF=y
# CONFIG_USE_SDIF1_EMMC is not set
CONFIG_BSP_USING_DC=y
# CONFIG_RT_USING_DC_CHANNEL0 is not set
CONFIG_RT_USING_DC_CHANNEL1=y
# CONFIG_BSP_USING_XHCI is not set
# CONFIG_BSP_USING_PUSB2 is not set
@ -1338,6 +1375,7 @@ CONFIG_TARGET_E2000D=y
# CONFIG_TARGET_E2000S is not set
# CONFIG_TARGET_FT2004 is not set
# CONFIG_TARGET_D2000 is not set
# CONFIG_TARGET_PD2308 is not set
CONFIG_SOC_NAME="e2000"
CONFIG_TARGET_TYPE_NAME="d"
CONFIG_SOC_CORE_NUM=2
@ -1346,7 +1384,6 @@ CONFIG_F32BIT_MEMORY_LENGTH=0x80000000
CONFIG_F64BIT_MEMORY_ADDRESS=0x2000000000
CONFIG_F64BIT_MEMORY_LENGTH=0x800000000
CONFIG_TARGET_E2000=y
# CONFIG_USE_SPINLOCK is not set
CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
# CONFIG_DEFAULT_DEBUG_PRINT_UART0 is not set
# CONFIG_DEFAULT_DEBUG_PRINT_UART2 is not set

16
bsp/phytium/aarch64/configs/e2000d_demo_rtsmart.h
View File

@ -122,6 +122,7 @@
#define RT_DFS_ELM_REENTRANT
#define RT_DFS_ELM_MUTEX_TIMEOUT 3000
#define RT_USING_DFS_DEVFS
#define RT_USING_DFS_PTYFS
#define RT_USING_PAGECACHE
/* page cache config */
@ -144,7 +145,6 @@
#define RT_USING_SERIAL_V1
#define RT_SERIAL_USING_DMA
#define RT_SERIAL_RB_BUFSZ 64
#define RT_USING_TTY
#define RT_USING_CAN
#define RT_CAN_USING_HDR
#define RT_CAN_USING_CANFD
@ -257,6 +257,8 @@
#define LWIP_SO_LINGER 0
#define LWIP_NETIF_LOOPBACK 0
#define RT_LWIP_USING_PING
#define RT_LWIP_DEBUG
#define RT_LWIP_NETIF_DEBUG
/* Memory protection */
@ -279,6 +281,8 @@
#define LWP_TID_MAX_NR 64
#define RT_LWP_SHM_MAX_NR 64
#define RT_USING_LDSO
#define LWP_USING_TERMINAL
#define LWP_PTY_MAX_PARIS_LIMIT 64
/* Memory management */
@ -427,7 +431,9 @@
#define RT_USING_SPIM3
#define BSP_USING_CAN
#define RT_USING_CANFD
#define RT_USING_FILTER
#define RT_USING_CAN0
#define RT_USING_CAN1
#define BSP_USING_GPIO
#define BSP_USING_QSPI
#define RT_USING_QSPI0
@ -439,6 +445,14 @@
#define BSP_USING_I2C
#define I2C_USE_MIO
#define RT_USING_MIO15
#define BSP_USING_SDIF
#define BSP_USING_SDCARD_FATFS
#define USING_SDIF0
#define USE_SDIF0_EMMC
#define USING_SDIF1
#define USE_SDIF1_TF
#define BSP_USING_DC
#define RT_USING_DC_CHANNEL1
/* Board extended module Drivers */

13
bsp/phytium/aarch64/configs/e2000d_demo_rtthread
View File

@ -41,7 +41,7 @@ CONFIG_RT_KSERVICE_USING_STDLIB=y
CONFIG_RT_KPRINTF_USING_LONGLONG=y
CONFIG_RT_USING_DEBUG=y
CONFIG_RT_DEBUGING_COLOR=y
CONFIG_RT_DEBUGING_CONTEXT=y
# CONFIG_RT_DEBUGING_CONTEXT is not set
# CONFIG_RT_DEBUGING_AUTO_INIT is not set
# CONFIG_RT_DEBUGING_PAGE_LEAK is not set
# CONFIG_RT_DEBUGING_SPINLOCK is not set
@ -1283,7 +1283,14 @@ CONFIG_I2C_USE_MIO=y
# CONFIG_RT_USING_MIO14 is not set
CONFIG_RT_USING_MIO15=y
# CONFIG_I2C_USE_CONTROLLER is not set
# CONFIG_BSP_USING_SDIF is not set
CONFIG_BSP_USING_SDIF=y
CONFIG_BSP_USING_SDCARD_FATFS=y
CONFIG_USING_SDIF0=y
# CONFIG_USE_SDIF0_TF is not set
CONFIG_USE_SDIF0_EMMC=y
CONFIG_USING_SDIF1=y
CONFIG_USE_SDIF1_TF=y
# CONFIG_USE_SDIF1_EMMC is not set
CONFIG_BSP_USING_DC=y
# CONFIG_RT_USING_DC_CHANNEL0 is not set
CONFIG_RT_USING_DC_CHANNEL1=y
@ -1312,6 +1319,7 @@ CONFIG_TARGET_E2000D=y
# CONFIG_TARGET_E2000S is not set
# CONFIG_TARGET_FT2004 is not set
# CONFIG_TARGET_D2000 is not set
# CONFIG_TARGET_PD2308 is not set
CONFIG_SOC_NAME="e2000"
CONFIG_TARGET_TYPE_NAME="d"
CONFIG_SOC_CORE_NUM=2
@ -1320,7 +1328,6 @@ CONFIG_F32BIT_MEMORY_LENGTH=0x80000000
CONFIG_F64BIT_MEMORY_ADDRESS=0x2000000000
CONFIG_F64BIT_MEMORY_LENGTH=0x800000000
CONFIG_TARGET_E2000=y
# CONFIG_USE_SPINLOCK is not set
CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
# CONFIG_DEFAULT_DEBUG_PRINT_UART0 is not set
# CONFIG_DEFAULT_DEBUG_PRINT_UART2 is not set

7
bsp/phytium/aarch64/configs/e2000d_demo_rtthread.h
View File

@ -30,7 +30,6 @@
#define RT_KPRINTF_USING_LONGLONG
#define RT_USING_DEBUG
#define RT_DEBUGING_COLOR
#define RT_DEBUGING_CONTEXT
/* Inter-Thread communication */
@ -411,6 +410,12 @@
#define BSP_USING_I2C
#define I2C_USE_MIO
#define RT_USING_MIO15
#define BSP_USING_SDIF
#define BSP_USING_SDCARD_FATFS
#define USING_SDIF0
#define USE_SDIF0_EMMC
#define USING_SDIF1
#define USE_SDIF1_TF
#define BSP_USING_DC
#define RT_USING_DC_CHANNEL1

20
bsp/phytium/aarch64/configs/e2000q_demo_rtsmart
View File

@ -165,6 +165,7 @@ CONFIG_RT_DFS_ELM_MUTEX_TIMEOUT=3000
# CONFIG_RT_DFS_ELM_USE_EXFAT is not set
CONFIG_RT_USING_DFS_DEVFS=y
# CONFIG_RT_USING_DFS_ROMFS is not set
CONFIG_RT_USING_DFS_PTYFS=y
# CONFIG_RT_USING_DFS_CROMFS is not set
# CONFIG_RT_USING_DFS_TMPFS is not set
# CONFIG_RT_USING_DFS_MQUEUE is not set
@ -195,8 +196,6 @@ CONFIG_RT_USING_SERIAL_V1=y
# CONFIG_RT_USING_SERIAL_V2 is not set
CONFIG_RT_SERIAL_USING_DMA=y
CONFIG_RT_SERIAL_RB_BUFSZ=64
CONFIG_RT_USING_TTY=y
# CONFIG_RT_TTY_DEBUG is not set
CONFIG_RT_USING_CAN=y
CONFIG_RT_CAN_USING_HDR=y
CONFIG_RT_CAN_USING_CANFD=y
@ -447,10 +446,11 @@ CONFIG_RT_CH_MSG_MAX_NR=1024
CONFIG_LWP_CONSOLE_INPUT_BUFFER_SIZE=1024
CONFIG_LWP_TID_MAX_NR=64
CONFIG_RT_LWP_SHM_MAX_NR=64
# CONFIG_LWP_UNIX98_PTY is not set
CONFIG_RT_USING_LDSO=y
# CONFIG_ELF_DEBUG_ENABLE is not set
# CONFIG_ELF_LOAD_RANDOMIZE is not set
CONFIG_LWP_USING_TERMINAL=y
CONFIG_LWP_PTY_MAX_PARIS_LIMIT=64
#
# Memory management
@ -1341,11 +1341,15 @@ CONFIG_RT_USING_MIO15=y
# CONFIG_I2C_USE_CONTROLLER is not set
CONFIG_BSP_USING_SDIF=y
CONFIG_BSP_USING_SDCARD_FATFS=y
CONFIG_BSP_USING_SDCARD_PARTITION="sd0"
# CONFIG_USING_SDIF0 is not set
CONFIG_USING_SDIF0=y
# CONFIG_USE_SDIF0_TF is not set
CONFIG_USE_SDIF0_EMMC=y
CONFIG_USING_SDIF1=y
# CONFIG_USING_EMMC is not set
# CONFIG_BSP_USING_DC is not set
CONFIG_USE_SDIF1_TF=y
# CONFIG_USE_SDIF1_EMMC is not set
CONFIG_BSP_USING_DC=y
# CONFIG_RT_USING_DC_CHANNEL0 is not set
CONFIG_RT_USING_DC_CHANNEL1=y
# CONFIG_BSP_USING_XHCI is not set
# CONFIG_BSP_USING_PUSB2 is not set
@ -1371,6 +1375,7 @@ CONFIG_TARGET_E2000Q=y
# CONFIG_TARGET_E2000S is not set
# CONFIG_TARGET_FT2004 is not set
# CONFIG_TARGET_D2000 is not set
# CONFIG_TARGET_PD2308 is not set
CONFIG_SOC_NAME="e2000"
CONFIG_TARGET_TYPE_NAME="q"
CONFIG_SOC_CORE_NUM=4
@ -1379,7 +1384,6 @@ CONFIG_F32BIT_MEMORY_LENGTH=0x80000000
CONFIG_F64BIT_MEMORY_ADDRESS=0x2000000000
CONFIG_F64BIT_MEMORY_LENGTH=0x800000000
CONFIG_TARGET_E2000=y
# CONFIG_USE_SPINLOCK is not set
CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
# CONFIG_DEFAULT_DEBUG_PRINT_UART0 is not set
# CONFIG_DEFAULT_DEBUG_PRINT_UART2 is not set

10
bsp/phytium/aarch64/configs/e2000q_demo_rtsmart.h
View File

@ -122,6 +122,7 @@
#define RT_DFS_ELM_REENTRANT
#define RT_DFS_ELM_MUTEX_TIMEOUT 3000
#define RT_USING_DFS_DEVFS
#define RT_USING_DFS_PTYFS
#define RT_USING_PAGECACHE
/* page cache config */
@ -144,7 +145,6 @@
#define RT_USING_SERIAL_V1
#define RT_SERIAL_USING_DMA
#define RT_SERIAL_RB_BUFSZ 64
#define RT_USING_TTY
#define RT_USING_CAN
#define RT_CAN_USING_HDR
#define RT_CAN_USING_CANFD
@ -281,6 +281,8 @@
#define LWP_TID_MAX_NR 64
#define RT_LWP_SHM_MAX_NR 64
#define RT_USING_LDSO
#define LWP_USING_TERMINAL
#define LWP_PTY_MAX_PARIS_LIMIT 64
/* Memory management */
@ -445,8 +447,12 @@
#define RT_USING_MIO15
#define BSP_USING_SDIF
#define BSP_USING_SDCARD_FATFS
#define BSP_USING_SDCARD_PARTITION "sd0"
#define USING_SDIF0
#define USE_SDIF0_EMMC
#define USING_SDIF1
#define USE_SDIF1_TF
#define BSP_USING_DC
#define RT_USING_DC_CHANNEL1
/* Board extended module Drivers */

50
bsp/phytium/aarch64/configs/e2000q_demo_rtthread
View File

@ -41,7 +41,7 @@ CONFIG_RT_KSERVICE_USING_STDLIB=y
CONFIG_RT_KPRINTF_USING_LONGLONG=y
CONFIG_RT_USING_DEBUG=y
CONFIG_RT_DEBUGING_COLOR=y
CONFIG_RT_DEBUGING_CONTEXT=y
# CONFIG_RT_DEBUGING_CONTEXT is not set
# CONFIG_RT_DEBUGING_AUTO_INIT is not set
# CONFIG_RT_DEBUGING_PAGE_LEAK is not set
# CONFIG_RT_DEBUGING_SPINLOCK is not set
@ -374,35 +374,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_RT_LWIP_USING_HW_CHECKSUM is not set
CONFIG_RT_LWIP_USING_PING=y
# CONFIG_LWIP_USING_DHCPD is not set
CONFIG_RT_LWIP_DEBUG=y
# CONFIG_RT_LWIP_SYS_DEBUG is not set
# CONFIG_RT_LWIP_ETHARP_DEBUG is not set
# CONFIG_RT_LWIP_PPP_DEBUG is not set
# CONFIG_RT_LWIP_MEM_DEBUG is not set
# CONFIG_RT_LWIP_MEMP_DEBUG is not set
# CONFIG_RT_LWIP_PBUF_DEBUG is not set
# CONFIG_RT_LWIP_API_LIB_DEBUG is not set
# CONFIG_RT_LWIP_API_MSG_DEBUG is not set
# CONFIG_RT_LWIP_TCPIP_DEBUG is not set
CONFIG_RT_LWIP_NETIF_DEBUG=y
# CONFIG_RT_LWIP_SOCKETS_DEBUG is not set
# CONFIG_RT_LWIP_DNS_DEBUG is not set
# CONFIG_RT_LWIP_AUTOIP_DEBUG is not set
# CONFIG_RT_LWIP_DHCP_DEBUG is not set
# CONFIG_RT_LWIP_IP_DEBUG is not set
# CONFIG_RT_LWIP_IP_REASS_DEBUG is not set
# CONFIG_RT_LWIP_ICMP_DEBUG is not set
# CONFIG_RT_LWIP_IGMP_DEBUG is not set
# CONFIG_RT_LWIP_UDP_DEBUG is not set
# CONFIG_RT_LWIP_TCP_DEBUG is not set
# CONFIG_RT_LWIP_TCP_INPUT_DEBUG is not set
# CONFIG_RT_LWIP_TCP_OUTPUT_DEBUG is not set
# CONFIG_RT_LWIP_TCP_RTO_DEBUG is not set
# CONFIG_RT_LWIP_TCP_CWND_DEBUG is not set
# CONFIG_RT_LWIP_TCP_WND_DEBUG is not set
# CONFIG_RT_LWIP_TCP_FR_DEBUG is not set
# CONFIG_RT_LWIP_TCP_QLEN_DEBUG is not set
# CONFIG_RT_LWIP_TCP_RST_DEBUG is not set
# CONFIG_RT_LWIP_DEBUG is not set
# CONFIG_RT_USING_AT is not set
#
@ -1273,9 +1245,9 @@ CONFIG_RT_USING_SPIM2=y
CONFIG_RT_USING_SPIM3=y
CONFIG_BSP_USING_CAN=y
CONFIG_RT_USING_CANFD=y
CONFIG_RT_USING_FILTER=y
# CONFIG_RT_USING_FILTER is not set
CONFIG_RT_USING_CAN0=y
CONFIG_RT_USING_CAN1=y
# CONFIG_RT_USING_CAN1 is not set
CONFIG_BSP_USING_GPIO=y
CONFIG_BSP_USING_QSPI=y
CONFIG_RT_USING_QSPI0=y
@ -1313,13 +1285,15 @@ CONFIG_RT_USING_MIO15=y
# CONFIG_I2C_USE_CONTROLLER is not set
CONFIG_BSP_USING_SDIF=y
CONFIG_BSP_USING_SDCARD_FATFS=y
CONFIG_BSP_USING_SDCARD_PARTITION="sd0"
# CONFIG_USING_SDIF0 is not set
CONFIG_USING_SDIF0=y
# CONFIG_USE_SDIF0_TF is not set
CONFIG_USE_SDIF0_EMMC=y
CONFIG_USING_SDIF1=y
# CONFIG_USING_EMMC is not set
CONFIG_USE_SDIF1_TF=y
# CONFIG_USE_SDIF1_EMMC is not set
CONFIG_BSP_USING_DC=y
CONFIG_RT_USING_DC_CHANNEL0=y
# CONFIG_RT_USING_DC_CHANNEL1 is not set
# CONFIG_RT_USING_DC_CHANNEL0 is not set
CONFIG_RT_USING_DC_CHANNEL1=y
# CONFIG_BSP_USING_XHCI is not set
# CONFIG_BSP_USING_PUSB2 is not set
@ -1345,6 +1319,7 @@ CONFIG_TARGET_E2000Q=y
# CONFIG_TARGET_E2000S is not set
# CONFIG_TARGET_FT2004 is not set
# CONFIG_TARGET_D2000 is not set
# CONFIG_TARGET_PD2308 is not set
CONFIG_SOC_NAME="e2000"
CONFIG_TARGET_TYPE_NAME="q"
CONFIG_SOC_CORE_NUM=4
@ -1353,7 +1328,6 @@ CONFIG_F32BIT_MEMORY_LENGTH=0x80000000
CONFIG_F64BIT_MEMORY_ADDRESS=0x2000000000
CONFIG_F64BIT_MEMORY_LENGTH=0x800000000
CONFIG_TARGET_E2000=y
# CONFIG_USE_SPINLOCK is not set
CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
# CONFIG_DEFAULT_DEBUG_PRINT_UART0 is not set
# CONFIG_DEFAULT_DEBUG_PRINT_UART2 is not set

11
bsp/phytium/aarch64/configs/e2000q_demo_rtthread.h
View File

@ -30,7 +30,6 @@
#define RT_KPRINTF_USING_LONGLONG
#define RT_USING_DEBUG
#define RT_DEBUGING_COLOR
#define RT_DEBUGING_CONTEXT
/* Inter-Thread communication */
@ -240,8 +239,6 @@
#define LWIP_SO_LINGER 0
#define LWIP_NETIF_LOOPBACK 0
#define RT_LWIP_USING_PING
#define RT_LWIP_DEBUG
#define RT_LWIP_NETIF_DEBUG
/* Memory protection */
@ -401,9 +398,7 @@
#define RT_USING_SPIM3
#define BSP_USING_CAN
#define RT_USING_CANFD
#define RT_USING_FILTER
#define RT_USING_CAN0
#define RT_USING_CAN1
#define BSP_USING_GPIO
#define BSP_USING_QSPI
#define RT_USING_QSPI0
@ -417,10 +412,12 @@
#define RT_USING_MIO15
#define BSP_USING_SDIF
#define BSP_USING_SDCARD_FATFS
#define BSP_USING_SDCARD_PARTITION "sd0"
#define USING_SDIF0
#define USE_SDIF0_EMMC
#define USING_SDIF1
#define USE_SDIF1_TF
#define BSP_USING_DC
#define RT_USING_DC_CHANNEL0
#define RT_USING_DC_CHANNEL1
/* Board extended module Drivers */

21
bsp/phytium/aarch64/configs/phytium_pi_rtsmart
View File

@ -165,6 +165,7 @@ CONFIG_RT_DFS_ELM_MUTEX_TIMEOUT=3000
# CONFIG_RT_DFS_ELM_USE_EXFAT is not set
CONFIG_RT_USING_DFS_DEVFS=y
# CONFIG_RT_USING_DFS_ROMFS is not set
CONFIG_RT_USING_DFS_PTYFS=y
# CONFIG_RT_USING_DFS_CROMFS is not set
# CONFIG_RT_USING_DFS_TMPFS is not set
# CONFIG_RT_USING_DFS_MQUEUE is not set
@ -195,8 +196,6 @@ CONFIG_RT_USING_SERIAL_V1=y
# CONFIG_RT_USING_SERIAL_V2 is not set
CONFIG_RT_SERIAL_USING_DMA=y
CONFIG_RT_SERIAL_RB_BUFSZ=64
CONFIG_RT_USING_TTY=y
# CONFIG_RT_TTY_DEBUG is not set
CONFIG_RT_USING_CAN=y
# CONFIG_RT_CAN_USING_HDR is not set
CONFIG_RT_CAN_USING_CANFD=y
@ -419,10 +418,11 @@ CONFIG_RT_CH_MSG_MAX_NR=1024
CONFIG_LWP_CONSOLE_INPUT_BUFFER_SIZE=1024
CONFIG_LWP_TID_MAX_NR=64
CONFIG_RT_LWP_SHM_MAX_NR=64
# CONFIG_LWP_UNIX98_PTY is not set
CONFIG_RT_USING_LDSO=y
# CONFIG_ELF_DEBUG_ENABLE is not set
# CONFIG_ELF_LOAD_RANDOMIZE is not set
CONFIG_LWP_USING_TERMINAL=y
CONFIG_LWP_PTY_MAX_PARIS_LIMIT=64
#
# Memory management
@ -1307,8 +1307,17 @@ CONFIG_RT_USING_MIO10=y
# CONFIG_RT_USING_MIO14 is not set
# CONFIG_RT_USING_MIO15 is not set
# CONFIG_I2C_USE_CONTROLLER is not set
# CONFIG_BSP_USING_SDIF is not set
# CONFIG_BSP_USING_DC is not set
CONFIG_BSP_USING_SDIF=y
CONFIG_BSP_USING_SDCARD_FATFS=y
# CONFIG_USING_SDIF0 is not set
# CONFIG_USE_SDIF0_TF is not set
# CONFIG_USE_SDIF0_EMMC is not set
CONFIG_USING_SDIF1=y
CONFIG_USE_SDIF1_TF=y
# CONFIG_USE_SDIF1_EMMC is not set
CONFIG_BSP_USING_DC=y
CONFIG_RT_USING_DC_CHANNEL0=y
CONFIG_RT_USING_DC_CHANNEL1=y
# CONFIG_BSP_USING_XHCI is not set
# CONFIG_BSP_USING_PUSB2 is not set
@ -1334,6 +1343,7 @@ CONFIG_TARGET_PHYTIUMPI=y
# CONFIG_TARGET_E2000S is not set
# CONFIG_TARGET_FT2004 is not set
# CONFIG_TARGET_D2000 is not set
# CONFIG_TARGET_PD2308 is not set
CONFIG_SOC_NAME="phytiumpi"
CONFIG_SOC_CORE_NUM=4
CONFIG_F32BIT_MEMORY_ADDRESS=0x80000000
@ -1341,7 +1351,6 @@ CONFIG_F32BIT_MEMORY_LENGTH=0x80000000
CONFIG_F64BIT_MEMORY_ADDRESS=0x2000000000
CONFIG_F64BIT_MEMORY_LENGTH=0x800000000
CONFIG_TARGET_E2000=y
# CONFIG_USE_SPINLOCK is not set
CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
# CONFIG_DEFAULT_DEBUG_PRINT_UART0 is not set
# CONFIG_DEFAULT_DEBUG_PRINT_UART2 is not set

11
bsp/phytium/aarch64/configs/phytium_pi_rtsmart.h
View File

@ -122,6 +122,7 @@
#define RT_DFS_ELM_REENTRANT
#define RT_DFS_ELM_MUTEX_TIMEOUT 3000
#define RT_USING_DFS_DEVFS
#define RT_USING_DFS_PTYFS
#define RT_USING_PAGECACHE
/* page cache config */
@ -144,7 +145,6 @@
#define RT_USING_SERIAL_V1
#define RT_SERIAL_USING_DMA
#define RT_SERIAL_RB_BUFSZ 64
#define RT_USING_TTY
#define RT_USING_CAN
#define RT_CAN_USING_CANFD
#define RT_USING_I2C
@ -278,6 +278,8 @@
#define LWP_TID_MAX_NR 64
#define RT_LWP_SHM_MAX_NR 64
#define RT_USING_LDSO
#define LWP_USING_TERMINAL
#define LWP_PTY_MAX_PARIS_LIMIT 64
/* Memory management */
@ -438,6 +440,13 @@
#define RT_USING_MIO1
#define RT_USING_MIO2
#define RT_USING_MIO10
#define BSP_USING_SDIF
#define BSP_USING_SDCARD_FATFS
#define USING_SDIF1
#define USE_SDIF1_TF
#define BSP_USING_DC
#define RT_USING_DC_CHANNEL0
#define RT_USING_DC_CHANNEL1
/* Board extended module Drivers */

11
bsp/phytium/aarch64/configs/phytium_pi_rtthread
View File

@ -1279,7 +1279,14 @@ CONFIG_RT_USING_MIO10=y
# CONFIG_RT_USING_MIO14 is not set
# CONFIG_RT_USING_MIO15 is not set
# CONFIG_I2C_USE_CONTROLLER is not set
# CONFIG_BSP_USING_SDIF is not set
CONFIG_BSP_USING_SDIF=y
CONFIG_BSP_USING_SDCARD_FATFS=y
# CONFIG_USING_SDIF0 is not set
# CONFIG_USE_SDIF0_TF is not set
# CONFIG_USE_SDIF0_EMMC is not set
CONFIG_USING_SDIF1=y
CONFIG_USE_SDIF1_TF=y
# CONFIG_USE_SDIF1_EMMC is not set
CONFIG_BSP_USING_DC=y
# CONFIG_RT_USING_DC_CHANNEL0 is not set
# CONFIG_RT_USING_DC_CHANNEL1 is not set
@ -1308,6 +1315,7 @@ CONFIG_TARGET_PHYTIUMPI=y
# CONFIG_TARGET_E2000S is not set
# CONFIG_TARGET_FT2004 is not set
# CONFIG_TARGET_D2000 is not set
# CONFIG_TARGET_PD2308 is not set
CONFIG_SOC_NAME="phytiumpi"
CONFIG_SOC_CORE_NUM=4
CONFIG_F32BIT_MEMORY_ADDRESS=0x80000000
@ -1315,7 +1323,6 @@ CONFIG_F32BIT_MEMORY_LENGTH=0x80000000
CONFIG_F64BIT_MEMORY_ADDRESS=0x2000000000
CONFIG_F64BIT_MEMORY_LENGTH=0x800000000
CONFIG_TARGET_E2000=y
# CONFIG_USE_SPINLOCK is not set
CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
# CONFIG_DEFAULT_DEBUG_PRINT_UART0 is not set
# CONFIG_DEFAULT_DEBUG_PRINT_UART2 is not set

4
bsp/phytium/aarch64/configs/phytium_pi_rtthread.h
View File

@ -410,6 +410,10 @@
#define RT_USING_MIO1
#define RT_USING_MIO2
#define RT_USING_MIO10
#define BSP_USING_SDIF
#define BSP_USING_SDCARD_FATFS
#define USING_SDIF1
#define USE_SDIF1_TF
#define BSP_USING_DC
/* Board extended module Drivers */

4
bsp/phytium/aarch64/rtconfig.h
View File

@ -410,6 +410,10 @@
#define RT_USING_MIO1
#define RT_USING_MIO2
#define RT_USING_MIO10
#define BSP_USING_SDIF
#define BSP_USING_SDCARD_FATFS
#define USING_SDIF1
#define USE_SDIF1_TF
#define BSP_USING_DC
/* Board extended module Drivers */

59
bsp/phytium/doc/how_to_use_file_system.md Normal file
View File

@ -0,0 +1,59 @@
# 如何使用 RT-Thread 文件系统
- 文件系统是开发者最常用的操作系统功能之一，RT-Thread 中很多功能也依赖文件系统完成，后面以 SD 卡作为文件系统介质，介绍一下 RT-Thread 中文件系统的制作和使用
- 飞腾派如果固件在 SD 卡中，不适用于本文档，可以参考[飞腾派SD文件系统](./use_phytium_pi_sd_image.md)
## 配置 SD 驱动
- 打开配置 BSP_USING_SDIF，使能 SD 驱动
- 打开配置 BSP_USING_SDCARD_FATFS，使能 SD 文件系统
- 根据板子的实际情况选择 SD 控制器，SD0 打开 USING_SDIF0，SD1 打开 USING_SDIF1
- 根据 SD 控制器连接的介质选择，TF 卡或者 eMMC，例如 USE_SDIF1_TF
- 在 mnt_sdcard.c 中指定根目录和 SD 设备
- 进行编译生成镜像
## 识别 SD 设备
- 启动镜像后，输入 list devices，查看 SD 设备是否识别成功
```
msh />list device
device type ref count
---------------- -------------------- ----------
sd10 Block Device 0 --> SD1 的第一个分区
sd1 Block Device 1 --> SD1
sd0 Block Device 1
zero Miscellaneous Device 0
urandom Miscellaneous Device 0
random Miscellaneous Device 0
null Miscellaneous Device 0
e0 Network Interface 1
SPI3 SPI Bus 0
SPI2 SPI Bus 0
SPI1 SPI Bus 0
SPI0 SPI Bus 0
PWM6 PWM Device 0
MIO15 I2C Bus 0
DC1 Graphic Device 0
uart1 Character Device 2
uart0 Character Device 0
QSPI0 SPI Bus 0
CAN0 CAN Device 0
```
## 制作 SD 文件系统
- 如果之前 SD 卡里没有 FAT32 文件系统，自动挂载可能不会成功，需要启动 RT-Thread 后格式化一个 SD 设备，然后 mount
```
msh />mkfs sd1 / elm
msh />mount sd1 / elm
mount device sd1(elm) onto / ... succeed!
```
- 文件系统制作好后，下次启动会自动挂载成根目录
## 使用 SD 文件系统
- 参考[RT-Thread 的文件系统使用说明](https://www.rt-thread.org/document/api/group___d_f_s.html)

147
bsp/phytium/doc/use_phytium_pi_sd_image.md
View File

@ -3,7 +3,6 @@
> 本文主要介绍如何在飞腾派中进行 RT-Thread 程序的开发和固化
- 飞腾派开发板是一款面向广大工程师和爱好者的开源硬件。主板处理器采用飞腾四核处理器,兼容 ARM v8 指令集,主频最高可达 1.8GHz
- 由于默认系统需要 16G 的空间，推荐使用 32G 的 SD 卡开发 RT-Thread 程序
## 开发和调试程序
@ -13,19 +12,19 @@
- 如果需要固化 RT-Thread 程序镜像在 SD 卡中，并实现开机自启动，可以使用下列的镜像，镜像中包含飞腾派的启动固件、飞腾派OS和一个 RT-Thread 的启动分区
- [镜像下载链接](https://pan.baidu.com/s/1eL2ElKeVBU5GOyvzn2kl-A)，提取码：PIIM
- [镜像下载链接](https://pan.baidu.com/s/1asc3MdcIh71-fkjS6Rptvw)，提取码：PHYT
- 下载之后解压，使用 sdcard-rtthread.img
```
-----------------------------------------------------------------------------------
| | | |
| 64MB (系统镜像) | 16G (Phytium Pi OS 根文件系统) | 4G (RT-Thread文件系统) |
| （无格式） | （ext4格式） | （fat32格式） |
----------------------------------------------------------------------------------
------------------------------------------------------
| | |
| 64MB (系统镜像) | 2G (RT-Thread文件系统) |
| （无格式） | （fat32格式） |
-----------------------------------------------------
```
- Windows 上使用 balenaEtcher 工具烧入一张 SD 卡（>= 32G），镜像的格式如下图所示，由3个分区组成，前 64MB 是二进制无格式的启动镜像，然后 16G 是 Phytium Pi OS 的根文件系统，格式为 ext4，最后 4G 是 RT-Thread 文件系统，格式为 fat32，
- Windows 上使用 balenaEtcher 工具烧入一张 SD 卡，镜像的格式如下图所示，由1个分区组成，前 64MB 是二进制无格式的启动镜像，后面 2G 是 RT-Thread 文件系统，格式为 fat32，
- 在 linux 系统上，可以使用 dd 命令将镜像写入 SD 卡 (/dev/sdd)
@ -36,6 +35,7 @@
- SD 卡烧入完成之后插入飞腾派 SD 卡槽，重启飞腾派就会自动进入 RT-Thread 系统，
```
PHYTIUM MCI: 0, PHYTIUM MCI: 1
Loading Environment from MMC... OK
In: uart@2800d000
Out: uart@2800d000
@ -44,95 +44,72 @@
scanning bus for devices...
SATA link 0 timeout.
AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst
flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst
SATA link 0 timeout.
AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst
Hit any key to stop autoboot: 0
739360 bytes read in 206 ms (3.4 MiB/s)
flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst
Hit any key to stop autoboot: 0
2740352 bytes read in 578 ms (4.5 MiB/s)
## Starting application at 0x80080000 ...
\ | /
- RT - Thread Operating System
/ | \ 5.1.0 build Nov 9 2023 09:13:25
2006 - 2022 Copyright by RT-Thread team
do components initialization.
initialize rti_board_end:0 done
initialize dfs_init:0 done
initialize rt_work_sys_workqueue_init:0 done
initialize rt_mmcsd_core_init:0 done
/ | \ 5.1.0 build Apr 9 2024 09:17:05
2006 - 2024 Copyright by RT-Thread team
lwIP-2.1.2 initialized!
[I/I2C] I2C bus [MIO15] registered
FXMAC OS Init Success!
Xmac e0 Initiailized!
Set netif e0 ip addr!
[E/drv] Auto negotiation is error.
FXMAC OS Init Success!
Xmac e1 Initiailized!
Set Xmac e1 ip addr!
Start Xmac NUM0
Start Xmac NUM1
[I/sal.skt] Socket Abstraction Layer initialize success.
msh />rt_device_find 0
[I/SDIO] SD card capacity 31178752 KB.
found part[0], begin: 67108864, size: 2.0GB
[I/mnt.filesystem] sd00 mount to '/'
msh />ls /
Directory /:
System Volume Inform<DIR>
rtthread_a64.bin 2740352
msh />df
disk free: 1.9 GB [ 4180704 block, 512 bytes per block ]
msh />
```
## 更新飞腾派 RT-Thread 镜像
- 有两种方式可以更新 SD 卡第三个分区中的 RT-Thread 镜像
- 1. 将 SD 卡插入一台能识别第三个分区的电脑 (Ubuntu 系统能识别，Windows 可能不能识别)，直接将 RT-Thread 镜像复制入 SD 卡
- 2. 可以通过 u-boot 上传 RT-Thread 镜像，然后保存在 SD 卡第三个分区中，注意保存文件的大小 (0xc0000)，要超过 tftpboot 加载的文件大小
```
Phytium-Pi#setenv ipaddr 192.168.4.20;setenv serverip 192.168.4.50;setenv gatewayip 192.168.4.1;
Phytium-Pi#tftpboot 0x90100000 rtthread_a64.bin
ethernet@3200c000: PHY present at 0
ethernet@3200c000: Starting autonegotiation...
ethernet@3200c000: Autonegotiation complete
ethernet@3200c000: link up, 1000Mbps full-duplex (lpa: 0x2800)
ft sgmii speed 1000M!
Using ethernet@3200c000 device
TFTP from server 192.168.4.50; our IP address is 192.168.4.20
Filename 'rtthread_a64.bin'.
Load address: 0x90100000
Loading: #################################################################
#################################################################
###############
133.8 KiB/s
done
Bytes transferred = 739840 (b4a00 hex)
Phytium-Pi#fatls mmc 0:2
rtthread-images/
.Trash-1000/
ram/
System Volume Information/
0 file(s), 4 dir(s)
Phytium-Pi#fatwrite mmc 0:2 0x90100000 rtthread-images/rtthread_a64.bin 0xc0000
786432 bytes written in 398 ms (1.9 MiB/s)
Phytium-Pi#fatls mmc 0:2 rtthread-images
./
../
786432 rtthread_a64.bin
944384 rtsmart_a64.bin
950828 rtsmart_a32.bin
722580 rtthread_a32.bin
4 file(s), 2 dir(s)
Phytium-Pi#
```
## 修改自启动的 RT-Thread 镜像
- 通过在 u-boot 控制台修改 bootcmd，可以指定不同的 RT-Thread 镜像自启动，如下所示，指定启动 RT-Smart 镜像 `rtsmart_a64.bin`
- 通过在 u-boot 控制台修改 bootcmd，可以指定不同的 RT-Thread 镜像自启动，如下所示，指定启动 RT-Smart 镜像 `rtthread_a64.bin`
```
Phytium-Pi#printenv bootcmd
bootcmd=mw 0x32b301a8 0x275;mmc dev 0;mmc read 0x90000000 0x2000 0x10000;bootm 0x90000000#phytium
Phytium-Pi#setenv bootcmd "fatload mmc 0:2 0x80080000 rtthread-images/rtthread_a64.bin;dcache flush;go 0x80080000;"
Phytium-Pi#saveenv
```
## 切换成 linux 开发模式
- 本文提供的 RT-Thread 开发镜像中，有一个 linux 系统，需要的时候可以修改 bootcmd，切换成自启动 linux 系统
```
Phytium-Pi#setenv bootcmd "mw 0x32b301a8 0x275;mmc dev 0;mmc read 0x90000000 0x2000 0x10000;bootm 0x90000000#phytium"
Phytium-Pi#saveenv
Saving Environment to MMC... Writing to MMC(0)... OK
```
```
Phytium-Pi#printenv bootcmd
bootcmd=mw 0x32b301a8 0x275;mmc dev 0;mmc read 0x90000000 0x2000 0x10000;bootm 0x90000000#phytium
Phytium-Pi#setenv bootcmd "fatload mmc 0:1 0x80080000 rtthread_a64.bin;dcache flush;go 0x80080000;"
Phytium-Pi#saveenv
```
## 在 RT-Thread 应用中访问 SD 卡分区
- 如前面介绍的，RT-Thread 应用可以使用第二个分区，分区文件系统格式为 FAT32
- 打开配置 BSP_USING_SDCARD_FATFS 后， RT-Thread / RT-Smart 启动过程中会将 SD 卡挂载为根目录，将配置 BSP_USING_SDCARD_PARTITION 设置为 `sd1`，指定第二个分区为 RT-Thread 根目录，启动后创建的文件都会使用这个 SD 分区
- 如前面介绍的，参考 libraries/port/fboard_port/firefly/mnt_sdcard.c，启动后会将 SD 卡的第一个分区（2GB 大小）自动挂载到根目录下
```
[I/SDIO] SD card capacity 31178752 KB.
found part[0], begin: 67108864, size: 2.0GB
[I/mnt.filesystem] sd00 mount to '/'
msh />
msh />ls
Directory /:
rtthread_a64.bin 2740352
msh />df
disk free: 1.9 GB [ 4180704 block, 512 bytes per block ]
msh />
```
- 如果需要替换 SD 卡中的 RT-Thread 镜像，直接取下 SD 卡插入 Windows/Ubuntu PC 中进行替换即可

23
bsp/phytium/libraries/SConscript
View File

@ -49,6 +49,28 @@ if GetDepend(['TARGET_D2000']):
src += Glob(cwd+'/port/soc_port/d2000/*.c')
path += [PHYTIUM_SDK_DIR + '/soc/d2000']
# board port
if GetDepend(['E2000D_DEMO_BOARD']):
path += cwd + '/fboard_port/e2000d_demo'
if GetDepend(['E2000D_DEMO_BOARD']):
path += cwd + '/fboard_port/e2000q_demo'
if GetDepend(['FIREFLY_DEMO_BOARD']):
path += cwd + '/fboard_port/firefly'
if GetDepend(['BSP_USING_SDCARD_FATFS']):
if GetDepend(['E2000D_DEMO_BOARD']):
src += Glob(cwd + '/port/fboard_port/e2000d_demo/mnt_sdcard.c')
if GetDepend(['E2000Q_DEMO_BOARD']):
src += Glob(cwd + '/port/fboard_port/e2000q_demo/mnt_sdcard.c')
if GetDepend(['FIREFLY_DEMO_BOARD']):
src += Glob(cwd + '/port/fboard_port/firefly/mnt_sdcard.c')
else:
src += Glob(cwd + '/port/fboard_port/mnt_ramdisk.c')
# driver
path += [PORT_DRV_DIR]
@ -148,7 +170,6 @@ src += Glob(cwd+'/port/fdriver_port/*.c')
path += [cwd + '/port/fdriver_port']
## fboard port
src += Glob(cwd+'/port/fboard_port/*.c')
path += [cwd + '/port/fboard_port']
## lwip port

41
bsp/phytium/libraries/drivers/Kconfig
View File

@ -228,25 +228,36 @@ menu "On-chip Peripheral Drivers"
select RT_USING_DFS_ELMFAT
default n
if BSP_USING_SDCARD_FATFS
config BSP_USING_SDCARD_PARTITION
string "Set SDCARD (FATFS) partition index"
default "sd0"
config USING_SDIF0
bool "Use SDIF0"
if USING_SDIF0
choice
prompt "Select SD0 Usage"
default USE_SDIF0_TF
config USE_SDIF0_TF
bool "SD0(TF)"
config USE_SDIF0_EMMC
bool "SD0(eMMC)"
endchoice
endif
choice
prompt "Choose a card to mount"
default USING_SDIF1
config USING_SDIF1
bool "Use SDIF1"
config USING_SDIF0
bool "Use SDIF0"
if USING_SDIF1
choice
prompt "Select SD1 Usage"
default USE_SDIF1_TF
config USE_SDIF1_TF
bool "SD1(TF)"
config USING_SDIF1
bool "Use SDIF1"
config USING_EMMC
bool "Use EMMC"
endchoice
config USE_SDIF1_EMMC
bool "SD1(eMMC)"
endchoice
endif
endif

4
bsp/phytium/libraries/drivers/drv_can.c
View File

@ -328,7 +328,7 @@ static rt_err_t _can_control(struct rt_can_device *can, int cmd, void *arg)
return RT_EOK;
}
static int _can_sendmsg(struct rt_can_device *can, const void *buf, rt_uint32_t box_num)
static rt_ssize_t _can_sendmsg(struct rt_can_device *can, const void *buf, rt_uint32_t box_num)
{
RT_ASSERT(can);
RT_ASSERT(buf);
@ -365,7 +365,7 @@ static int _can_sendmsg(struct rt_can_device *can, const void *buf, rt_uint32_t
return (FCanSend(&drv_can->can_handle, &can_frame) == RT_EOK) ? RT_EOK : -RT_ERROR;
}
static int _can_recvmsg(struct rt_can_device *can, void *buf, rt_uint32_t fifo)
static rt_ssize_t _can_recvmsg(struct rt_can_device *can, void *buf, rt_uint32_t fifo)
{
RT_ASSERT(can);
RT_ASSERT(buf);

11
bsp/phytium/libraries/drivers/drv_gpio.c
View File

@ -223,19 +223,12 @@ rt_err_t drv_pin_attach_irq(struct rt_device *device, rt_base_t pin,
if (pin_config->en_irq)
{
FGpioSetInterruptMask(pin_instance, FALSE);
FGpioPinId pin_of_ctrl =
{
.ctrl = ctrl_id,
.port = FGPIO_PORT_A,
.pin = FGPIO_PIN_0
};
if (FGPIO_IRQ_BY_CONTROLLER == FGpioGetPinIrqSourceType(pin_of_ctrl)) /* setup for ctrl report interrupt */
if (FGPIO_IRQ_BY_CONTROLLER == FGpioGetPinIrqSourceType(*pin_instance)) /* setup for ctrl report interrupt */
{
FGpioOpsSetupCtrlIRQ(instance);
LOG_I("GPIO-%d report irq by controller", ctrl_id);
}
else if (FGPIO_IRQ_BY_PIN == FGpioGetPinIrqSourceType(pin_of_ctrl))
else if (FGPIO_IRQ_BY_PIN == FGpioGetPinIrqSourceType(*pin_instance))
{
FGpioOpsSetupPinIRQ(instance, pin_instance, pin_config);
LOG_I("GPIO-%d report irq by pin", ctrl_id);

5
bsp/phytium/libraries/drivers/drv_i2c.c
View File

@ -169,11 +169,12 @@ static rt_ssize_t i2c_master_xfer(struct rt_i2c_bus_device *device, struct rt_i2
RT_ASSERT(device);
u32 ret;
struct rt_i2c_msg *pmsg;
rt_ssize_t i;
struct phytium_i2c_bus *i2c_bus;
i2c_bus = (struct phytium_i2c_bus *)(device);
u32 mem_addr;
for (int i = 0; i < num; i++)
for (i = 0; i < num; i++)
{
pmsg = &msgs[i];
for (u32 j = 0; j <FI2C_DEVICE_MEMADDR_LEN; j++)
@ -201,7 +202,7 @@ static rt_ssize_t i2c_master_xfer(struct rt_i2c_bus_device *device, struct rt_i2
}
}
return RT_EOK;
return i;
}
static const struct rt_i2c_bus_device_ops _i2c_ops =

2
bsp/phytium/libraries/drivers/drv_log.h
View File

@ -20,7 +20,7 @@
#ifdef DRV_DEBUG
#define DBG_LVL DBG_LOG
#else
#define DBG_LVL DBG_INFO
#define DBG_LVL DBG_ERROR
#endif /* DRV_DEBUG */
#include <rtdbg.h>

910
bsp/phytium/libraries/drivers/drv_sdif.c
View File

File diff suppressed because it is too large Load Diff

6
bsp/phytium/libraries/drivers/drv_spi.c
View File

@ -47,7 +47,7 @@ static struct rt_event rx_done_event;
#define EVENT_RX_DONE (1 << 1)
/*******************************Api Functions*********************************/
static rt_err_t spim_configure(struct rt_spi_device *device, struct rt_spi_configuration *configuration);
static rt_uint32_t spim_xfer(struct rt_spi_device *device, struct rt_spi_message *message);
static rt_ssize_t spim_xfer(struct rt_spi_device *device, struct rt_spi_message *message);
static FError FSpimSetupInterrupt(FSpim *instance_p)
{
@ -147,12 +147,12 @@ static rt_err_t spim_configure(struct rt_spi_device *device,
return ret;
}
static rt_uint32_t spim_xfer(struct rt_spi_device *device, struct rt_spi_message *message)
static rt_ssize_t spim_xfer(struct rt_spi_device *device, struct rt_spi_message *message)
{
RT_ASSERT(device != RT_NULL);
RT_ASSERT(device->parent.user_data != RT_NULL);
RT_ASSERT(message != RT_NULL);
rt_size_t message_length;
rt_ssize_t message_length;
rt_uint8_t *recv_buf;
const rt_uint8_t *send_buf;

2
bsp/phytium/libraries/phytium_standalone_sdk_install.py
View File

@ -19,6 +19,6 @@ def clone_repository(branch, commit_hash):
if __name__ == "__main__":
branch_to_clone = "master"
commit_to_clone = "13657081faf9f2d504592f7110159c4e63dc6f29"
commit_to_clone = "cd15b23000d0c52968dc322b6d99025195bbf446"
clone_repository(branch_to_clone, commit_to_clone)

133
bsp/phytium/libraries/port/fboard_port/e2000d_demo/mnt_sdcard.c Normal file
View File

@ -0,0 +1,133 @@
/*
* Copyright (c) 2006-2023, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Email: opensource_embedded@phytium.com.cn
*
* Change Logs:
* Date Author Notes
* 2023-04-27 huanghe first version
* 2023-07-14 liqiaozhong add SD file sys mount func
* 2024-04-08 zhugengyu define mount table by board
*/
#include <rtthread.h>
#include <dfs_fs.h>
#define DBG_TAG "mnt.filesystem"
#define DBG_LVL DBG_INFO
#include <rtdbg.h>
#define FS_SD_MOUNT_POINT "/"
#define FS_SD_DEVICE_NAME "sd1"
#define FS_SD_DEVICE_INDEX 1
#define FS_EMMC_MOUNT_POINT "/sd0"
#define FS_EMMC_DEVICE_NAME "sd0"
#define FS_EMMC_DEVICE_INDEX 0
extern void sdif_change(rt_uint32_t id);
extern rt_int32_t sdif_card_inserted(rt_uint32_t id);
static rt_int32_t card_inserted = 0;
static void _sdcard_mount(void)
{
rt_device_t device;
device = rt_device_find(FS_SD_DEVICE_NAME);
rt_kprintf("rt_device_find %x \r\n", device);
if (device == NULL)
{
mmcsd_wait_cd_changed(0);
sdif_change(FS_SD_DEVICE_INDEX);
mmcsd_wait_cd_changed(RT_WAITING_FOREVER);
device = rt_device_find(FS_SD_DEVICE_NAME);
}
if (device != RT_NULL)
{
if (dfs_mount(FS_SD_DEVICE_NAME, FS_SD_MOUNT_POINT, "elm", 0, 0) == RT_EOK)
{
LOG_I("%s mount to '%s'", FS_SD_DEVICE_NAME, FS_SD_MOUNT_POINT);
mkdir(FS_EMMC_MOUNT_POINT, 0);
if (dfs_mount(FS_EMMC_DEVICE_NAME, FS_EMMC_MOUNT_POINT, "elm", 0, 0) == RT_EOK)
{
LOG_I("%s mount to '%s'", FS_EMMC_DEVICE_NAME, FS_EMMC_MOUNT_POINT);
}
card_inserted = 1;
}
else
{
LOG_W("%s mount to '%s' failed!", FS_SD_DEVICE_NAME, FS_SD_MOUNT_POINT);
}
}
}
static void _sdcard_unmount(void)
{
rt_thread_mdelay(200);
dfs_unmount(FS_SD_MOUNT_POINT);
LOG_I("Unmount %s", FS_SD_MOUNT_POINT);
mmcsd_wait_cd_changed(0);
sdif_change(FS_SD_DEVICE_INDEX);
mmcsd_wait_cd_changed(RT_WAITING_FOREVER);
card_inserted = 0;
}
static void sd_auto_mount(void *parameter)
{
rt_thread_mdelay(20);
/* detect eMMC */
mmcsd_wait_cd_changed(0);
sdif_change(FS_EMMC_DEVICE_INDEX);
mmcsd_wait_cd_changed(RT_WAITING_FOREVER);
if ((card_inserted == 0) && (sdif_card_inserted(FS_SD_DEVICE_INDEX) == 1))
{
_sdcard_mount();
}
while (RT_TRUE)
{
rt_thread_mdelay(200);
if ((card_inserted == 0) && (sdif_card_inserted(FS_SD_DEVICE_INDEX) == 1))
{
_sdcard_mount();
}
if ((card_inserted == 1) && (sdif_card_inserted(FS_SD_DEVICE_INDEX) == 0))
{
_sdcard_unmount();
}
}
}
static void sd_mount(void)
{
rt_thread_t tid;
tid = rt_thread_create("sd_mount", sd_auto_mount, RT_NULL,
4096, RT_THREAD_PRIORITY_MAX - 2, 20);
if (tid != RT_NULL)
{
rt_thread_startup(tid);
}
else
{
LOG_E("create sd_mount thread err!");
return;
}
}
int filesystem_mount(void)
{
sd_mount();
return RT_EOK;
}
INIT_APP_EXPORT(filesystem_mount);

133
bsp/phytium/libraries/port/fboard_port/e2000q_demo/mnt_sdcard.c Normal file
View File

@ -0,0 +1,133 @@
/*
* Copyright (c) 2006-2023, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Email: opensource_embedded@phytium.com.cn
*
* Change Logs:
* Date Author Notes
* 2023-04-27 huanghe first version
* 2023-07-14 liqiaozhong add SD file sys mount func
* 2024-04-08 zhugengyu define mount table by board
*/
#include <rtthread.h>
#include <dfs_fs.h>
#define DBG_TAG "mnt.filesystem"
#define DBG_LVL DBG_INFO
#include <rtdbg.h>
#define FS_SD_MOUNT_POINT "/"
#define FS_SD_DEVICE_NAME "sd1"
#define FS_SD_DEVICE_INDEX 1
#define FS_EMMC_MOUNT_POINT "/sd0"
#define FS_EMMC_DEVICE_NAME "sd0"
#define FS_EMMC_DEVICE_INDEX 0
extern void sdif_change(rt_uint32_t id);
extern rt_int32_t sdif_card_inserted(rt_uint32_t id);
static rt_int32_t card_inserted = 0;
static void _sdcard_mount(void)
{
rt_device_t device;
device = rt_device_find(FS_SD_DEVICE_NAME);
rt_kprintf("rt_device_find %x \r\n", device);
if (device == NULL)
{
mmcsd_wait_cd_changed(0);
sdif_change(FS_SD_DEVICE_INDEX);
mmcsd_wait_cd_changed(RT_WAITING_FOREVER);
device = rt_device_find(FS_SD_DEVICE_NAME);
}
if (device != RT_NULL)
{
if (dfs_mount(FS_SD_DEVICE_NAME, FS_SD_MOUNT_POINT, "elm", 0, 0) == RT_EOK)
{
LOG_I("%s mount to '%s'", FS_SD_DEVICE_NAME, FS_SD_MOUNT_POINT);
mkdir(FS_EMMC_MOUNT_POINT, 0);
if (dfs_mount(FS_EMMC_DEVICE_NAME, FS_EMMC_MOUNT_POINT, "elm", 0, 0) == RT_EOK)
{
LOG_I("%s mount to '%s'", FS_EMMC_DEVICE_NAME, FS_EMMC_MOUNT_POINT);
}
card_inserted = 1;
}
else
{
LOG_W("%s mount to '%s' failed!", FS_SD_DEVICE_NAME, FS_SD_MOUNT_POINT);
}
}
}
static void _sdcard_unmount(void)
{
rt_thread_mdelay(200);
dfs_unmount(FS_SD_MOUNT_POINT);
LOG_I("Unmount %s", FS_SD_MOUNT_POINT);
mmcsd_wait_cd_changed(0);
sdif_change(FS_SD_DEVICE_INDEX);
mmcsd_wait_cd_changed(RT_WAITING_FOREVER);
card_inserted = 0;
}
static void sd_auto_mount(void *parameter)
{
rt_thread_mdelay(20);
/* detect eMMC */
mmcsd_wait_cd_changed(0);
sdif_change(FS_EMMC_DEVICE_INDEX);
mmcsd_wait_cd_changed(RT_WAITING_FOREVER);
if ((card_inserted == 0) && (sdif_card_inserted(FS_SD_DEVICE_INDEX) == 1))
{
_sdcard_mount();
}
while (RT_TRUE)
{
rt_thread_mdelay(200);
if ((card_inserted == 0) && (sdif_card_inserted(FS_SD_DEVICE_INDEX) == 1))
{
_sdcard_mount();
}
if ((card_inserted == 1) && (sdif_card_inserted(FS_SD_DEVICE_INDEX) == 0))
{
_sdcard_unmount();
}
}
}
static void sd_mount(void)
{
rt_thread_t tid;
tid = rt_thread_create("sd_mount", sd_auto_mount, RT_NULL,
4096, RT_THREAD_PRIORITY_MAX - 2, 20);
if (tid != RT_NULL)
{
rt_thread_startup(tid);
}
else
{
LOG_E("create sd_mount thread err!");
return;
}
}
int filesystem_mount(void)
{
sd_mount();
return RT_EOK;
}
INIT_APP_EXPORT(filesystem_mount);

118
bsp/phytium/libraries/port/fboard_port/firefly/mnt_sdcard.c Normal file
View File

@ -0,0 +1,118 @@
/*
* Copyright (c) 2006-2023, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Email: opensource_embedded@phytium.com.cn
*
* Change Logs:
* Date Author Notes
* 2023-04-27 huanghe first version
* 2023-07-14 liqiaozhong add SD file sys mount func
* 2024-04-08 zhugengyu define mount table by board
*/
#include <rtthread.h>
#include <dfs_fs.h>
#define DBG_TAG "mnt.filesystem"
#define DBG_LVL DBG_INFO
#include <rtdbg.h>
#define FS_SD_MOUNT_POINT "/"
#define FS_SD_DEVICE_NAME "sd00" /* first partition of SD0 */
#define FS_SD_DEVICE_INDEX 0
extern void sdif_change(rt_uint32_t id);
extern rt_int32_t sdif_card_inserted(rt_uint32_t id);
static rt_int32_t card_inserted = 0;
static void _sdcard_mount(void)
{
rt_device_t device;
device = rt_device_find(FS_SD_DEVICE_NAME);
rt_kprintf("rt_device_find %x \r\n", device);
if (device == NULL)
{
mmcsd_wait_cd_changed(0);
sdif_change(FS_SD_DEVICE_INDEX);
mmcsd_wait_cd_changed(RT_WAITING_FOREVER);
device = rt_device_find(FS_SD_DEVICE_NAME);
}
if (device != RT_NULL)
{
if (dfs_mount(FS_SD_DEVICE_NAME, FS_SD_MOUNT_POINT, "elm", 0, 0) == RT_EOK)
{
LOG_I("%s mount to '%s'", FS_SD_DEVICE_NAME, FS_SD_MOUNT_POINT);
card_inserted = 1;
}
else
{
LOG_W("%s mount to '%s' failed!", FS_SD_DEVICE_NAME, FS_SD_MOUNT_POINT);
}
}
}
static void _sdcard_unmount(void)
{
rt_thread_mdelay(200);
dfs_unmount(FS_SD_MOUNT_POINT);
LOG_I("Unmount %s", FS_SD_MOUNT_POINT);
mmcsd_wait_cd_changed(0);
sdif_change(FS_SD_DEVICE_INDEX);
mmcsd_wait_cd_changed(RT_WAITING_FOREVER);
card_inserted = 0;
}
static void sd_auto_mount(void *parameter)
{
rt_thread_mdelay(20);
if ((card_inserted == 0) && (sdif_card_inserted(FS_SD_DEVICE_INDEX) == 1))
{
_sdcard_mount();
}
while (RT_TRUE)
{
rt_thread_mdelay(200);
if ((card_inserted == 0) && (sdif_card_inserted(FS_SD_DEVICE_INDEX) == 1))
{
_sdcard_mount();
}
if ((card_inserted == 1) && (sdif_card_inserted(FS_SD_DEVICE_INDEX) == 0))
{
_sdcard_unmount();
}
}
}
static void sd_mount(void)
{
rt_thread_t tid;
tid = rt_thread_create("sd_mount", sd_auto_mount, RT_NULL,
4096, RT_THREAD_PRIORITY_MAX - 2, 20);
if (tid != RT_NULL)
{
rt_thread_startup(tid);
}
else
{
LOG_E("create sd_mount thread err!");
return;
}
}
int filesystem_mount(void)
{
sd_mount();
return RT_EOK;
}
INIT_APP_EXPORT(filesystem_mount);

50
bsp/phytium/libraries/port/fboard_port/mnt_ramdisk.c Normal file
View File

@ -0,0 +1,50 @@
/*
* Copyright (c) 2006-2023, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Email: opensource_embedded@phytium.com.cn
*
* Change Logs:
* Date Author Notes
* 2023-04-27 huanghe first version
* 2023-07-14 liqiaozhong add SD file sys mount func
*
*/
#include <rtthread.h>
#include <rtdbg.h>
#ifndef RT_USING_SMART
#include <dfs_fs.h>
#include <dfs_file.h>
static int ram_disk_mount(const char *mount_point)
{
extern struct dfs_ramfs *dfs_ramfs_create(rt_uint8_t *pool, rt_size_t size);
rt_uint8_t *pool = RT_NULL;
rt_size_t size = 8 * 1024 * 1024;
pool = rt_malloc(size);
if (pool == RT_NULL)
{
LOG_E("Malloc fail!");
}
if (dfs_mount(RT_NULL, mount_point, "ram", 0, (const void *)dfs_ramfs_create(pool, size)) == 0)
{
LOG_I("RAM file system initializated!");
}
else
{
LOG_E("RAM file system initializate failed!");
}
return RT_EOK;
}
static int filesystem_mount(void)
{
return ram_disk_mount("/"); /* mount ramdisk as / */
}
INIT_APP_EXPORT(filesystem_mount);
#endif