libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity

1. 去掉了多余的测试打印信息 

2. 恢复了1052的BSP的初始配置
This commit is contained in:
WangQiang 2020-10-12 19:15:03 +08:00
parent 3b07c8d593
commit d911dc9267
3 changed files with 3 additions and 108 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

61
bsp/imxrt/imxrt1052-nxp-evk/.config
View File

@ -176,64 +176,15 @@ CONFIG_NETDEV_IPV6=0
#
# light weight TCP/IP stack
#
CONFIG_RT_USING_LWIP=y
# CONFIG_RT_USING_LWIP is not set
# CONFIG_RT_USING_LWIP141 is not set
CONFIG_RT_USING_LWIP202=y
# CONFIG_RT_USING_LWIP202 is not set
# CONFIG_RT_USING_LWIP212 is not set
# CONFIG_RT_USING_LWIP_IPV6 is not set
CONFIG_RT_LWIP_MEM_ALIGNMENT=4
CONFIG_RT_LWIP_IGMP=y
CONFIG_RT_LWIP_ICMP=y
# CONFIG_RT_LWIP_SNMP is not set
CONFIG_RT_LWIP_DNS=y
# CONFIG_RT_LWIP_DHCP is not set
#
# Static IPv4 Address
#
CONFIG_RT_LWIP_IPADDR="192.168.1.200"
CONFIG_RT_LWIP_GWADDR="192.168.1.1"
CONFIG_RT_LWIP_MSKADDR="255.255.255.0"
CONFIG_RT_LWIP_UDP=y
CONFIG_RT_LWIP_TCP=y
CONFIG_RT_LWIP_RAW=y
# CONFIG_RT_LWIP_PPP is not set
CONFIG_RT_MEMP_NUM_NETCONN=8
CONFIG_RT_LWIP_PBUF_NUM=16
CONFIG_RT_LWIP_RAW_PCB_NUM=4
CONFIG_RT_LWIP_UDP_PCB_NUM=4
CONFIG_RT_LWIP_TCP_PCB_NUM=4
CONFIG_RT_LWIP_TCP_SEG_NUM=40
CONFIG_RT_LWIP_TCP_SND_BUF=8196
CONFIG_RT_LWIP_TCP_WND=8196
CONFIG_RT_LWIP_TCPTHREAD_PRIORITY=10
CONFIG_RT_LWIP_TCPTHREAD_MBOX_SIZE=8
CONFIG_RT_LWIP_TCPTHREAD_STACKSIZE=1024
# CONFIG_LWIP_NO_RX_THREAD is not set
# CONFIG_LWIP_NO_TX_THREAD is not set
CONFIG_RT_LWIP_ETHTHREAD_PRIORITY=12
CONFIG_RT_LWIP_ETHTHREAD_STACKSIZE=1024
CONFIG_RT_LWIP_ETHTHREAD_MBOX_SIZE=8
# CONFIG_RT_LWIP_REASSEMBLY_FRAG is not set
CONFIG_LWIP_NETIF_STATUS_CALLBACK=1
CONFIG_LWIP_NETIF_LINK_CALLBACK=1
CONFIG_SO_REUSE=1
CONFIG_LWIP_SO_RCVTIMEO=1
CONFIG_LWIP_SO_SNDTIMEO=1
CONFIG_LWIP_SO_RCVBUF=1
CONFIG_LWIP_SO_LINGER=0
# CONFIG_RT_LWIP_NETIF_LOOPBACK is not set
CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_RT_LWIP_STATS is not set
# CONFIG_RT_LWIP_USING_HW_CHECKSUM is not set
CONFIG_RT_LWIP_USING_PING=y
# CONFIG_RT_LWIP_DEBUG is not set
#
# AT commands
#
# CONFIG_RT_USING_AT is not set
# CONFIG_LWIP_USING_DHCPD is not set
#
# VBUS(Virtual Software BUS)
@ -423,13 +374,7 @@ CONFIG_BSP_USING_LPUART1=y
# Onboard Peripheral Drivers
#
# CONFIG_BSP_USING_SDRAM is not set
CONFIG_BSP_USING_ETH=y
CONFIG_BSP_USING_PHY=y
CONFIG_PHY_DEVICE_ADDRESS=2
CONFIG_PHY_USING_KSZ8081=y
CONFIG_PHY_RESET_PORT=1
CONFIG_PHY_RESET_PIN=9
CONFIG_FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE=y
# CONFIG_BSP_USING_ETH is not set
#
# Board extended module Drivers

45
bsp/imxrt/imxrt1052-nxp-evk/rtconfig.h
View File

@ -105,44 +105,6 @@
/* light weight TCP/IP stack */
#define RT_USING_LWIP
#define RT_USING_LWIP202
#define RT_LWIP_MEM_ALIGNMENT 4
#define RT_LWIP_IGMP
#define RT_LWIP_ICMP
#define RT_LWIP_DNS
/* Static IPv4 Address */
#define RT_LWIP_IPADDR "192.168.1.200"
#define RT_LWIP_GWADDR "192.168.1.1"
#define RT_LWIP_MSKADDR "255.255.255.0"
#define RT_LWIP_UDP
#define RT_LWIP_TCP
#define RT_LWIP_RAW
#define RT_MEMP_NUM_NETCONN 8
#define RT_LWIP_PBUF_NUM 16
#define RT_LWIP_RAW_PCB_NUM 4
#define RT_LWIP_UDP_PCB_NUM 4
#define RT_LWIP_TCP_PCB_NUM 4
#define RT_LWIP_TCP_SEG_NUM 40
#define RT_LWIP_TCP_SND_BUF 8196
#define RT_LWIP_TCP_WND 8196
#define RT_LWIP_TCPTHREAD_PRIORITY 10
#define RT_LWIP_TCPTHREAD_MBOX_SIZE 8
#define RT_LWIP_TCPTHREAD_STACKSIZE 1024
#define RT_LWIP_ETHTHREAD_PRIORITY 12
#define RT_LWIP_ETHTHREAD_STACKSIZE 1024
#define RT_LWIP_ETHTHREAD_MBOX_SIZE 8
#define LWIP_NETIF_STATUS_CALLBACK 1
#define LWIP_NETIF_LINK_CALLBACK 1
#define SO_REUSE 1
#define LWIP_SO_RCVTIMEO 1
#define LWIP_SO_SNDTIMEO 1
#define LWIP_SO_RCVBUF 1
#define LWIP_SO_LINGER 0
#define LWIP_NETIF_LOOPBACK 0
#define RT_LWIP_USING_PING
/* AT commands */
@ -206,13 +168,6 @@
/* Onboard Peripheral Drivers */
#define BSP_USING_ETH
#define BSP_USING_PHY
#define PHY_DEVICE_ADDRESS 2
#define PHY_USING_KSZ8081
#define PHY_RESET_PORT 1
#define PHY_RESET_PIN 9
#define FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE
/* Board extended module Drivers */

5
bsp/imxrt/libraries/drivers/drv_eth.c
View File

@ -551,7 +551,6 @@ static void phy_monitor_thread_entry(void *parameter)
LOG_E("Can not find phy device called \"rtt-phy\"");
return ;
}
LOG_I("start to initialize phy device!");
if (RT_NULL == phy_dev->ops->init)
{
LOG_E("phy driver error!");
@ -563,10 +562,6 @@ static void phy_monitor_thread_entry(void *parameter)
LOG_E("Phy device initialize unsuccessful!\n");
return ;
}
else
{
LOG_I("Phy device initialize successful!\n");
}
while (1)
{