libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity

add eth driver for STM32 CL 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@71 bbd45198-f89e-11dd-88c7-29a3b14d5316
This commit is contained in:
bernard.xiong 2009-10-06 00:24:03 +00:00
parent 6e7df72528
commit d5c4a86de8
2 changed files with 219 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

218
bsp/stm3210/eth_cl.c Normal file
View File

@ -0,0 +1,218 @@
/*
* File : eth_cl.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006 - 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-10-05 Bernard eth interface driver for STM32F107 CL
*/
#include <rtthread.h>
#include "Libraries/STM32_ETH_Driver/inc/stm32_eth.h"
#include <netif/ethernetif.h>
#include "lwipopts.h"
#define DP83848_PHY /* Ethernet pins mapped on STM3210C-EVAL Board */
#define PHY_ADDRESS 0x01 /* Relative to STM3210C-EVAL Board */
#define ETH_RXBUFNB 8
#define ETH_TXBUFNB 2
ETH_InitTypeDef ETH_InitStructure;
ETH_DMADESCTypeDef DMARxDscrTab[ETH_RXBUFNB], DMATxDscrTab[ETH_TXBUFNB];
rt_uint8_t Rx_Buff[ETH_RXBUFNB][ETH_MAX_PACKET_SIZE], Tx_Buff[ETH_TXBUFNB][ETH_MAX_PACKET_SIZE];
#define MAX_ADDR_LEN 6
struct rt_stm32_eth
{
/* inherit from ethernet device */
struct eth_device parent;
/* interface address info. */
rt_uint8_t dev_addr[MAX_ADDR_LEN]; /* hw address */
};
static struct rt_stm32_eth stm32_eth_device;
/* interrupt service routine */
void rt_stm32_eth_isr(int irqno)
{
rt_uint32_t status;
if (status) // if receive packet
{
rt_err_t result;
/* a frame has been received */
result = eth_device_ready(&(stm32_eth_device.parent));
RT_ASSERT(result == RT_EOK);
}
if (status) // if finished packet transmission
{
}
}
/* RT-Thread Device Interface */
/* initialize the interface */
static rt_err_t rt_stm32_eth_init(rt_device_t dev)
{
vu32 Value = 0;
/* Reset ETHERNET on AHB Bus */
ETH_DeInit();
/* Software reset */
ETH_SoftwareReset();
/* Wait for software reset */
while(ETH_GetSoftwareResetStatus()==SET);
/* ETHERNET Configuration ------------------------------------------------------*/
/* Call ETH_StructInit if you don't like to configure all ETH_InitStructure parameter */
ETH_StructInit(&ETH_InitStructure);
/* Fill ETH_InitStructure parametrs */
/*------------------------ MAC -----------------------------------*/
ETH_InitStructure.ETH_AutoNegotiation = ETH_AutoNegotiation_Enable ;
ETH_InitStructure.ETH_Speed = ETH_Speed_100M;
ETH_InitStructure.ETH_LoopbackMode = ETH_LoopbackMode_Disable;
ETH_InitStructure.ETH_Mode = ETH_Mode_FullDuplex;
ETH_InitStructure.ETH_RetryTransmission = ETH_RetryTransmission_Disable;
ETH_InitStructure.ETH_AutomaticPadCRCStrip = ETH_AutomaticPadCRCStrip_Disable;
ETH_InitStructure.ETH_ReceiveAll = ETH_ReceiveAll_Enable;
ETH_InitStructure.ETH_BroadcastFramesReception = ETH_BroadcastFramesReception_Disable;
ETH_InitStructure.ETH_PromiscuousMode = ETH_PromiscuousMode_Disable;
ETH_InitStructure.ETH_MulticastFramesFilter = ETH_MulticastFramesFilter_Perfect;
ETH_InitStructure.ETH_UnicastFramesFilter = ETH_UnicastFramesFilter_Perfect;
/* Configure ETHERNET */
Value = ETH_Init(&ETH_InitStructure, PHY_ADDRESS);
/* Initialize Tx Descriptors list: Chain Mode */
ETH_DMATxDescChainInit(DMATxDscrTab, &Tx_Buff[0][0], ETH_TXBUFNB);
/* Initialize Rx Descriptors list: Chain Mode */
ETH_DMARxDescChainInit(DMARxDscrTab, &Rx_Buff[0][0], ETH_RXBUFNB);
/* Enable MAC and DMA transmission and reception */
ETH_Start();
return RT_EOK;
}
static rt_err_t rt_stm32_eth_open(rt_device_t dev, rt_uint16_t oflag)
{
return RT_EOK;
}
static rt_err_t rt_stm32_eth_close(rt_device_t dev)
{
return RT_EOK;
}
static rt_size_t rt_stm32_eth_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
rt_set_errno(-RT_ENOSYS);
return 0;
}
static rt_size_t rt_stm32_eth_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
rt_set_errno(-RT_ENOSYS);
return 0;
}
static rt_err_t rt_stm32_eth_control(rt_device_t dev, rt_uint8_t cmd, void *args)
{
switch(cmd)
{
case NIOCTL_GADDR:
/* get mac address */
if(args) rt_memcpy(args, stm32_eth_device.dev_addr, 6);
else return -RT_ERROR;
break;
default :
break;
}
return RT_EOK;
}
/* ethernet device interface */
/* transmit packet. */
rt_err_t rt_stm32_eth_tx( rt_device_t dev, struct pbuf* p)
{
struct pbuf* q;
rt_uint32_t len;
rt_uint8_t* ptr;
for (q = p; q != NULL; q = q->next)
{
len = q->len;
ptr = q->payload;
/* write data to device */
}
return RT_EOK;
}
/* reception packet. */
struct pbuf *rt_stm32_eth_rx(rt_device_t dev)
{
struct pbuf* p;
rt_uint32_t len;
/* init p pointer */
p = RT_NULL;
if (1) // if there is packet in device
{
/* get one packet length */
len = 0; // packet length
/* allocate buffer */
p = pbuf_alloc(PBUF_LINK, len, PBUF_RAM);
if (p != RT_NULL)
{
rt_uint8_t* data;
struct pbuf* q;
for (q = p; q != RT_NULL; q= q->next)
{
data = q->payload;
len = q->len;
/* read data from device */
}
}
}
else
{
/* restore interrupt */
}
return p;
}
void rt_hw_stm32_eth_init()
{
stm32_eth_device.parent.parent.init = rt_stm32_eth_init;
stm32_eth_device.parent.parent.open = rt_stm32_eth_open;
stm32_eth_device.parent.parent.close = rt_stm32_eth_close;
stm32_eth_device.parent.parent.read = rt_stm32_eth_read;
stm32_eth_device.parent.parent.write = rt_stm32_eth_write;
stm32_eth_device.parent.parent.control = rt_stm32_eth_control;
stm32_eth_device.parent.parent.private = RT_NULL;
stm32_eth_device.parent.eth_rx = rt_stm32_eth_rx;
stm32_eth_device.parent.eth_tx = rt_stm32_eth_tx;
eth_device_init(&(stm32_eth_device.parent), "e0");
}

3
bsp/stm3210/led.c
View File

@ -5,8 +5,7 @@
#define GPIO_LED GPIOF #define GPIO_LED GPIOF
#define GPIO_Pin_LED GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9 #define GPIO_Pin_LED GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9
static const rt_uint16_t led_map[] = {GPIO_Pin_6, GPIO_Pin_7, GPIO_Pin_8, GPIO_Pin_9 static const rt_uint16_t led_map[] = {GPIO_Pin_6, GPIO_Pin_7, GPIO_Pin_8, GPIO_Pin_9};
};
static rt_uint8_t led_inited = 0; static rt_uint8_t led_inited = 0;
static void GPIO_Configuration(void) static void GPIO_Configuration(void)