libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity

Fix many abnormal symbols in annotations

This commit is contained in:
Stwsyburg 2023-04-17 09:12:10 +08:00 committed by Man, Jianting (Meco)
parent 371693b5ce
commit ca1b1e5164
24 changed files with 52 additions and 52 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
bsp/airm2m/air32f103/libraries/AIR32F10xLib/src/air32f10x_i2c.c
View File

@ -1161,7 +1161,7 @@ ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
} }
/** /**
* @brief Clears the I2Cx�s interrupt pending bits. * @brief Clears the I2Cx's interrupt pending bits.
* @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
* @param I2C_IT: specifies the interrupt pending bit to clear. * @param I2C_IT: specifies the interrupt pending bit to clear.
* This parameter can be any combination of the following values: * This parameter can be any combination of the following values:

6
bsp/apm32/libraries/APM32E10x_Library/APM32E10x_StdPeriphDriver/src/apm32e10x_pmu.c
View File

@ -103,7 +103,7 @@ void PMU_DisablePVD(void)
/*! /*!
* @brief Configure a voltage threshold detected by a power supply voltage detector (PVD). * @brief Configure a voltage threshold detected by a power supply voltage detector (PVD).
* *
* @param level<EFBFBD><EFBFBD>specifies the PVD detection level * @param level: specifies the PVD detection level
* This parameter can be one of the following values: * This parameter can be one of the following values:
* @arg PMU_PVD_LEVEL_2V2 : Config PVD detection level to 2.2V * @arg PMU_PVD_LEVEL_2V2 : Config PVD detection level to 2.2V
* @arg PMU_PVD_LEVEL_2V3 : Config PVD detection level to 2.3V * @arg PMU_PVD_LEVEL_2V3 : Config PVD detection level to 2.3V
@ -216,7 +216,7 @@ void PMU_EnterSTANDBYMode(void)
/*! /*!
* @brief Read the specified PWR flag is set or not. * @brief Read the specified PWR flag is set or not.
* *
* @param flag<EFBFBD><EFBFBD>Reads the status of specifies the flag. * @param flag: Reads the status of specifies the flag.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* @arg PMU_FLAG_WUE : Wake Up flag * @arg PMU_FLAG_WUE : Wake Up flag
* @arg PMU_FLAG_SB : StandBy flag * @arg PMU_FLAG_SB : StandBy flag
@ -246,7 +246,7 @@ uint8_t PMU_ReadStatusFlag(PMU_FLAG_T flag)
/*! /*!
* @brief Clears the PWR's pending flags. * @brief Clears the PWR's pending flags.
* *
* @param flag<EFBFBD><EFBFBD>Clears the status of specifies the flag. * @param flag: Clears the status of specifies the flag.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* @arg PMU_FLAG_WUE : Wake Up flag * @arg PMU_FLAG_WUE : Wake Up flag
* @arg PMU_FLAG_SB : StandBy flag * @arg PMU_FLAG_SB : StandBy flag

2
bsp/apm32/libraries/APM32E10x_Library/APM32E10x_StdPeriphDriver/src/apm32e10x_rcm.c
View File

@ -1051,7 +1051,7 @@ void RCM_ClearStatusFlag(void)
/*! /*!
* @brief Reads the specified RCM interrupt Flag * @brief Reads the specified RCM interrupt Flag
* *
* @param flag <EFBFBD><EFBFBD>Reads specifies RCM interrupt flag. * @param flag : Reads specifies RCM interrupt flag.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* @arg RCM_INT_LSIRDY : LSI ready interrupt flag * @arg RCM_INT_LSIRDY : LSI ready interrupt flag
* @arg RCM_INT_LSERDY : LSE ready interrupt flag * @arg RCM_INT_LSERDY : LSE ready interrupt flag

2
bsp/apm32/libraries/APM32E10x_Library/APM32E10x_StdPeriphDriver/src/apm32e10x_sdio.c
View File

@ -304,7 +304,7 @@ uint32_t SDIO_ReadDataCounter(void)
/*! /*!
* @brief Write the SDIO Data * @brief Write the SDIO Data
* *
* @param Data<EFBFBD><EFBFBD>Write 32-bit data * @param Data: Write 32-bit data
* *
* @retval None * @retval None
*/ */

8
bsp/imx6sx/iMX6_Platform_SDK/sdk/include/mx6sdl/registers/regsiomuxc.h
View File

@ -3104,8 +3104,8 @@ typedef union _hw_iomuxc_gpr5
* ARM WFI event out indicating on WFI state of the cores (these are status, read only bits) * ARM WFI event out indicating on WFI state of the cores (these are status, read only bits)
* *
* Values: * Values:
* - 0 - ARM Core[GPR5-index] is not in “Wait for Interrupt” mode * - 0 - ARM Core[GPR5-index] is not in "Wait for Interrupt" mode
* - 1 - ARM Core[GPR5-index] is in “Wait for Interrupt” mode * - 1 - ARM Core[GPR5-index] is in "Wait for Interrupt" mode
*/ */
//@{ //@{
#define BP_IOMUXC_GPR5_ARM_WFI (0) //!< Bit position for IOMUXC_GPR5_ARM_WFI. #define BP_IOMUXC_GPR5_ARM_WFI (0) //!< Bit position for IOMUXC_GPR5_ARM_WFI.
@ -3120,8 +3120,8 @@ typedef union _hw_iomuxc_gpr5
* ARM WFE event out indication on WFE state of the cores (these are status, read only bits) * ARM WFE event out indication on WFE state of the cores (these are status, read only bits)
* *
* Values: * Values:
* - 0 - ARM Core[GPR5-index - 4] is not in “Wait for Event” mode * - 0 - ARM Core[GPR5-index - 4] is not in "Wait for Event" mode
* - 1 - ARM Core[GPR5-index - 4] is in “Wait for Event” mode * - 1 - ARM Core[GPR5-index - 4] is in "Wait for Event" mode
*/ */
//@{ //@{
#define BP_IOMUXC_GPR5_ARM_WFE (4) //!< Bit position for IOMUXC_GPR5_ARM_WFE. #define BP_IOMUXC_GPR5_ARM_WFE (4) //!< Bit position for IOMUXC_GPR5_ARM_WFE.

8
bsp/imx6sx/iMX6_Platform_SDK/sdk/include/mx6sl/registers/regsiomuxc.h
View File

@ -2260,8 +2260,8 @@ typedef union _hw_iomuxc_gpr5
* ARM WFI event out indicating on WFI state of the cores (these are status, read only bits) * ARM WFI event out indicating on WFI state of the cores (these are status, read only bits)
* *
* Values: * Values:
* - 0 - ARM Core[GPR5-index] is not in <EFBFBD><EFBFBD>Wait for Interrupt<EFBFBD><EFBFBD> mode * - 0 - ARM Core[GPR5-index] is not in "Wait for Interrupt" mode
* - 1 - ARM Core[GPR5-index] is in <EFBFBD><EFBFBD>Wait for Interrupt<EFBFBD><EFBFBD> mode * - 1 - ARM Core[GPR5-index] is in "Wait for Interrupt" mode
*/ */
//@{ //@{
#define BP_IOMUXC_GPR5_ARM_WFI (0) //!< Bit position for IOMUXC_GPR5_ARM_WFI. #define BP_IOMUXC_GPR5_ARM_WFI (0) //!< Bit position for IOMUXC_GPR5_ARM_WFI.
@ -2276,8 +2276,8 @@ typedef union _hw_iomuxc_gpr5
* ARM WFE event out indication on WFE state of the cores (these are status, read only bits) * ARM WFE event out indication on WFE state of the cores (these are status, read only bits)
* *
* Values: * Values:
* - 0 - ARM Core[GPR5-index - 4] is not in <EFBFBD><EFBFBD>Wait for Event<EFBFBD><EFBFBD> mode * - 0 - ARM Core[GPR5-index - 4] is not in "Wait for Event" mode
* - 1 - ARM Core[GPR5-index - 4] is in <EFBFBD><EFBFBD>Wait for Event<EFBFBD><EFBFBD> mode * - 1 - ARM Core[GPR5-index - 4] is in "Wait for Event" mode
*/ */
//@{ //@{
#define BP_IOMUXC_GPR5_ARM_WFE (4) //!< Bit position for IOMUXC_GPR5_ARM_WFE. #define BP_IOMUXC_GPR5_ARM_WFE (4) //!< Bit position for IOMUXC_GPR5_ARM_WFE.

2
bsp/lpc824/Libraries/peri_driver/dma/dma_8xx.h
View File

@ -397,7 +397,7 @@ STATIC INLINE uint32_t Chip_DMA_GetActiveChannels(LPC_DMA_T *pDMA)
* that the channel for that bit (bit 0 = channel 0, bit 1 - * that the channel for that bit (bit 0 = channel 0, bit 1 -
* channel 1, etc.) is busy. A low state is not busy. A DMA * channel 1, etc.) is busy. A low state is not busy. A DMA
* channel is considered busy when there is any operation * channel is considered busy when there is any operation
* related to that channel in the DMA controller<EFBFBD>s internal * related to that channel in the DMA controller's internal
* pipeline. * pipeline.
*/ */
STATIC INLINE uint32_t Chip_DMA_GetBusyChannels(LPC_DMA_T *pDMA) STATIC INLINE uint32_t Chip_DMA_GetBusyChannels(LPC_DMA_T *pDMA)

2
bsp/mm32f103x/Libraries/MM32F103/HAL_lib/src/HAL_adc.c
View File

@ -752,7 +752,7 @@ ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT)
} }
/** /**
* @brief Clears the ADCx’s interrupt pending bits. * @brief Clears the ADCx's interrupt pending bits.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param ADC_IT: specifies the ADC interrupt pending bit to clear. * @param ADC_IT: specifies the ADC interrupt pending bit to clear.
* This parameter can be any combination of the following values: * This parameter can be any combination of the following values:

2
bsp/mm32f103x/Libraries/MM32F103/HAL_lib/src/HAL_dma.c
View File

@ -486,7 +486,7 @@ ITStatus DMA_GetITStatus(uint32_t DMA_IT)
} }
/** /**
* @brief Clears the DMAy Channelx’s interrupt pending bits. * @brief Clears the DMAy Channelx's interrupt pending bits.
* @param DMA_IT: specifies the DMA interrupt pending bit to clear. * @param DMA_IT: specifies the DMA interrupt pending bit to clear.
* This parameter can be any combination (for the same DMA) of * This parameter can be any combination (for the same DMA) of
* the following values: * the following values:

4
bsp/mm32f103x/Libraries/MM32F103/HAL_lib/src/HAL_rcc.c
View File

@ -704,7 +704,7 @@ void RCC_LSICmd(FunctionalState NewState)
/** /**
* @brief Configures the RTC clock (RTCCLK). * @brief Configures the RTC clock (RTCCLK).
* Once the RTC clock is selected it can’t be changed unless the * Once the RTC clock is selected it can't be changed unless the
* Backup domain is reset. * Backup domain is reset.
* @param RCC_RTCCLKSource: specifies the RTC clock source. * @param RCC_RTCCLKSource: specifies the RTC clock source.
* This parameter can be one of the following values: * This parameter can be one of the following values:
@ -1113,7 +1113,7 @@ ITStatus RCC_GetITStatus(uint8_t RCC_IT)
} }
/** /**
* @brief Clears the RCC’s interrupt pending bits. * @brief Clears the RCC's interrupt pending bits.
* @param RCC_IT: specifies the interrupt pending bit to clear. * @param RCC_IT: specifies the interrupt pending bit to clear.
* This parameter can be any combination of the following values: * This parameter can be any combination of the following values:
* @arg RCC_IT_LSIRDY: LSI ready interrupt * @arg RCC_IT_LSIRDY: LSI ready interrupt

8
bsp/mm32f103x/Libraries/MM32F103/HAL_lib/src/HAL_tim.c
View File

@ -896,7 +896,7 @@ void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource)
} }
/** /**
* @brief Configures the TIMx’s DMA interface. * @brief Configures the TIMx's DMA interface.
* @param TIMx: where x can be 1, 2, 3, 4 to select the TIM * @param TIMx: where x can be 1, 2, 3, 4 to select the TIM
* peripheral. * peripheral.
* @param TIM_DMABase: DMA Base address. * @param TIM_DMABase: DMA Base address.
@ -924,7 +924,7 @@ void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurs
} }
/** /**
* @brief Enables or disables the TIMx’s DMA Requests. * @brief Enables or disables the TIMx's DMA Requests.
* @param TIMx: where x can be 1 to 4 to select the TIM peripheral. * @param TIMx: where x can be 1 to 4 to select the TIM peripheral.
* @param TIM_DMASource: specifies the DMA Request sources. * @param TIM_DMASource: specifies the DMA Request sources.
* This parameter can be any combination of the following values: * This parameter can be any combination of the following values:
@ -2125,7 +2125,7 @@ void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource)
} }
/** /**
* @brief Enables or disables the TIMx’s Hall sensor interface. * @brief Enables or disables the TIMx's Hall sensor interface.
* @param TIMx: where x can be 1, 2, 3, 4 to select the TIM peripheral. * @param TIMx: where x can be 1, 2, 3, 4 to select the TIM peripheral.
* @param NewState: new state of the TIMx Hall sensor interface. * @param NewState: new state of the TIMx Hall sensor interface.
* This parameter can be: ENABLE or DISABLE. * This parameter can be: ENABLE or DISABLE.
@ -2149,7 +2149,7 @@ void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState)
} }
/** /**
* @brief Selects the TIMx’s One Pulse Mode. * @brief Selects the TIMx's One Pulse Mode.
* @param TIMx: where x can be 1 to 4 to select the TIM peripheral. * @param TIMx: where x can be 1 to 4 to select the TIM peripheral.
* @param TIM_OPMode: specifies the OPM Mode to be used. * @param TIM_OPMode: specifies the OPM Mode to be used.
* This parameter can be one of the following values: * This parameter can be one of the following values:

2
bsp/mm32f327x/Libraries/MM32F327x/HAL_Lib/Src/hal_rcc.c
View File

@ -687,7 +687,7 @@ ITStatus RCC_GetITStatus(RCC_IT_TypeDef it)
} }
//////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////////
/// @brief Clears the RCC<EFBFBD>?interrupt pending bits. /// @brief Clears the RCC's interrupt pending bits.
/// @param it: specifies the interrupt pending bit to clear. /// @param it: specifies the interrupt pending bit to clear.
/// This parameter can be any combination of the following values: /// This parameter can be any combination of the following values:
/// @arg RCC_IT_LSIRDY: LSI ready interrupt /// @arg RCC_IT_LSIRDY: LSI ready interrupt

2
bsp/mm32l07x/Libraries/MM32L0xx/HAL_lib/src/HAL_adc.c
View File

@ -784,7 +784,7 @@ ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT)
} }
/** /**
* @brief Clears the ADCx’s interrupt pending bits. * @brief Clears the ADCx's interrupt pending bits.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param ADC_IT: specifies the ADC interrupt pending bit to clear. * @param ADC_IT: specifies the ADC interrupt pending bit to clear.
* This parameter can be any combination of the following values: * This parameter can be any combination of the following values:

2
bsp/mm32l07x/Libraries/MM32L0xx/HAL_lib/src/HAL_dma.c
View File

@ -476,7 +476,7 @@ ITStatus DMA_GetITStatus(uint32_t DMA_IT)
} }
/** /**
* @brief Clears the DMAy Channelx’s interrupt pending bits. * @brief Clears the DMAy Channelx's interrupt pending bits.
* @param DMA_IT: specifies the DMA interrupt pending bit to clear. * @param DMA_IT: specifies the DMA interrupt pending bit to clear.
* This parameter can be any combination (for the same DMA) of * This parameter can be any combination (for the same DMA) of
* the following values: * the following values:

2
bsp/mm32l3xx/Libraries/MM32L3xx/HAL_lib/src/HAL_adc.c
View File

@ -752,7 +752,7 @@ ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT)
} }
/** /**
* @brief Clears the ADCx’s interrupt pending bits. * @brief Clears the ADCx's interrupt pending bits.
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* @param ADC_IT: specifies the ADC interrupt pending bit to clear. * @param ADC_IT: specifies the ADC interrupt pending bit to clear.
* This parameter can be any combination of the following values: * This parameter can be any combination of the following values:

2
bsp/mm32l3xx/Libraries/MM32L3xx/HAL_lib/src/HAL_dma.c
View File

@ -486,7 +486,7 @@ ITStatus DMA_GetITStatus(uint32_t DMA_IT)
} }
/** /**
* @brief Clears the DMAy Channelx’s interrupt pending bits. * @brief Clears the DMAy Channelx's interrupt pending bits.
* @param DMA_IT: specifies the DMA interrupt pending bit to clear. * @param DMA_IT: specifies the DMA interrupt pending bit to clear.
* This parameter can be any combination (for the same DMA) of * This parameter can be any combination (for the same DMA) of
* the following values: * the following values:

4
bsp/mm32l3xx/Libraries/MM32L3xx/HAL_lib/src/HAL_rcc.c
View File

@ -703,7 +703,7 @@ void RCC_LSICmd(FunctionalState NewState)
/** /**
* @brief Configures the RTC clock (RTCCLK). * @brief Configures the RTC clock (RTCCLK).
* Once the RTC clock is selected it can’t be changed unless the * Once the RTC clock is selected it can't be changed unless the
* Backup domain is reset. * Backup domain is reset.
* @param RCC_RTCCLKSource: specifies the RTC clock source. * @param RCC_RTCCLKSource: specifies the RTC clock source.
* This parameter can be one of the following values: * This parameter can be one of the following values:
@ -1109,7 +1109,7 @@ ITStatus RCC_GetITStatus(uint8_t RCC_IT)
} }
/** /**
* @brief Clears the RCC’s interrupt pending bits. * @brief Clears the RCC's interrupt pending bits.
* @param RCC_IT: specifies the interrupt pending bit to clear. * @param RCC_IT: specifies the interrupt pending bit to clear.
* This parameter can be any combination of the following values: * This parameter can be any combination of the following values:
* @arg RCC_IT_LSIRDY: LSI ready interrupt * @arg RCC_IT_LSIRDY: LSI ready interrupt

8
bsp/mm32l3xx/Libraries/MM32L3xx/HAL_lib/src/HAL_tim.c
View File

@ -896,7 +896,7 @@ void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource)
} }
/** /**
* @brief Configures the TIMx’s DMA interface. * @brief Configures the TIMx's DMA interface.
* @param TIMx: where x can be 1, 2, 3, 4 to select the TIM * @param TIMx: where x can be 1, 2, 3, 4 to select the TIM
* peripheral. * peripheral.
* @param TIM_DMABase: DMA Base address. * @param TIM_DMABase: DMA Base address.
@ -924,7 +924,7 @@ void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurs
} }
/** /**
* @brief Enables or disables the TIMx’s DMA Requests. * @brief Enables or disables the TIMx's DMA Requests.
* @param TIMx: where x can be 1 to 4 to select the TIM peripheral. * @param TIMx: where x can be 1 to 4 to select the TIM peripheral.
* @param TIM_DMASource: specifies the DMA Request sources. * @param TIM_DMASource: specifies the DMA Request sources.
* This parameter can be any combination of the following values: * This parameter can be any combination of the following values:
@ -2125,7 +2125,7 @@ void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource)
} }
/** /**
* @brief Enables or disables the TIMx’s Hall sensor interface. * @brief Enables or disables the TIMx's Hall sensor interface.
* @param TIMx: where x can be 1, 2, 3, 4 to select the TIM peripheral. * @param TIMx: where x can be 1, 2, 3, 4 to select the TIM peripheral.
* @param NewState: new state of the TIMx Hall sensor interface. * @param NewState: new state of the TIMx Hall sensor interface.
* This parameter can be: ENABLE or DISABLE. * This parameter can be: ENABLE or DISABLE.
@ -2149,7 +2149,7 @@ void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState)
} }
/** /**
* @brief Selects the TIMx’s One Pulse Mode. * @brief Selects the TIMx's One Pulse Mode.
* @param TIMx: where x can be 1 to 4 to select the TIM peripheral. * @param TIMx: where x can be 1 to 4 to select the TIM peripheral.
* @param TIM_OPMode: specifies the OPM Mode to be used. * @param TIM_OPMode: specifies the OPM Mode to be used.
* This parameter can be one of the following values: * This parameter can be one of the following values:

4
bsp/mm32l3xx/Libraries/MM32L3xx/HAL_lib/src/HAL_uart.c
View File

@ -272,7 +272,7 @@ void UART_ITConfig(UART_TypeDef* UARTx, uint16_t UART_IT, FunctionalState NewSta
} }
/** /**
* @brief Enables or disables the UART’s DMA interface. * @brief Enables or disables the UART's DMA interface.
* @param UARTx: Select the UART or the UART peripheral. * @param UARTx: Select the UART or the UART peripheral.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* UART1, UART2, UART3 . * UART1, UART2, UART3 .
@ -423,7 +423,7 @@ ITStatus UART_GetITStatus(UART_TypeDef* UARTx, uint16_t UART_IT)
} }
/** /**
* @brief Clears the UARTx’s interrupt pending bits. * @brief Clears the UARTx's interrupt pending bits.
* @param UARTx: Select the UART or the UART peripheral. * @param UARTx: Select the UART or the UART peripheral.
* This parameter can be one of the following values: * This parameter can be one of the following values:
* UART1, UART2, UART3, UART4 or UART5. * UART1, UART2, UART3, UART4 or UART5.

18
bsp/raspberry-pi/raspi3-32/applications/test_device.c
View File

@ -308,11 +308,11 @@ EXIT:
} }
#ifdef RT_USING_WDT #ifdef RT_USING_WDT
#define WDT_DEVICE_NAME "wdg" /* 鐪嬮棬鐙楄澶囧悕绉<EFBFBD> */ #define WDT_DEVICE_NAME "wdg" /* the name of the watchdog device */
static rt_device_t wdg_dev; /* 鐪嬮棬鐙楄澶囧彞鏌<EFBFBD> */ static rt_device_t wdg_dev; /* handle of the watchdog device */
static void idle_hook(void) static void idle_hook(void)
{ {
/* 鍦ㄧ┖闂茬嚎绋嬬殑鍥炶皟鍑芥暟閲屽杺鐙<EFBFBD> */ /* Feed the dog in the callback function of the idle thread */
rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_KEEPALIVE, NULL); rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_KEEPALIVE, NULL);
//rt_kprintf("feed the dog!\n "); //rt_kprintf("feed the dog!\n ");
} }
@ -321,38 +321,38 @@ rt_err_t test_wdt(void)
{ {
rt_kprintf("Hello Test WDT!\n"); rt_kprintf("Hello Test WDT!\n");
rt_err_t ret = RT_EOK; rt_err_t ret = RT_EOK;
rt_uint32_t timeout = 1; /* 婧㈠嚭鏃堕棿锛屽崟浣嶏細绉<EFBFBD> */ rt_uint32_t timeout = 1; /* the overflow time */
char device_name[RT_NAME_MAX]; char device_name[RT_NAME_MAX];
rt_strncpy(device_name, WDT_DEVICE_NAME, RT_NAME_MAX); rt_strncpy(device_name, WDT_DEVICE_NAME, RT_NAME_MAX);
/* 鏍规嵁璁惧鍚嶇О鏌ユ壘鐪嬮棬鐙楄澶囷紝鑾峰彇璁惧鍙ユ焺 */ /* find the watchdog device based on the device's name and obtain the device handle */
wdg_dev = rt_device_find(device_name); wdg_dev = rt_device_find(device_name);
if (!wdg_dev) if (!wdg_dev)
{ {
rt_kprintf("find %s failed!\n", device_name); rt_kprintf("find %s failed!\n", device_name);
return -RT_ERROR; return -RT_ERROR;
} }
/* 鍒濆鍖栬澶<EFBFBD> */ /* initialize the device */
ret = rt_device_init(wdg_dev); ret = rt_device_init(wdg_dev);
if (ret != RT_EOK) if (ret != RT_EOK)
{ {
rt_kprintf("initialize %s failed!\n", device_name); rt_kprintf("initialize %s failed!\n", device_name);
return -RT_ERROR; return -RT_ERROR;
} }
/* 璁剧疆鐪嬮棬鐙楁孩鍑烘椂闂<EFBFBD> */ /* set the overflow time of the watch dog */
ret = rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_SET_TIMEOUT, &timeout); ret = rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_SET_TIMEOUT, &timeout);
if (ret != RT_EOK) if (ret != RT_EOK)
{ {
rt_kprintf("set %s timeout failed!\n", device_name); rt_kprintf("set %s timeout failed!\n", device_name);
return -RT_ERROR; return -RT_ERROR;
} }
/* 鍚姩鐪嬮棬鐙<EFBFBD> */ /* start the watchdog */
ret = rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_START, RT_NULL); ret = rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_START, RT_NULL);
if (ret != RT_EOK) if (ret != RT_EOK)
{ {
rt_kprintf("start %s failed!\n", device_name); rt_kprintf("start %s failed!\n", device_name);
return -RT_ERROR; return -RT_ERROR;
} }
/* 璁剧疆绌洪棽绾跨▼鍥炶皟鍑芥暟 */ /* set idle thread callback function */
rt_thread_idle_sethook(idle_hook); rt_thread_idle_sethook(idle_hook);
return ret; return ret;

4
bsp/tkm32F499/Libraries/Hal_lib/src/HAL_rcc.c
View File

@ -833,7 +833,7 @@ void RCC_LSICmd(FunctionalState NewState)
/** /**
* @brief Configures the RTC clock (RTCCLK). * @brief Configures the RTC clock (RTCCLK).
* Once the RTC clock is selected it can抰 be changed unless the * Once the RTC clock is selected it can't be changed unless the
* Backup domain is reset. * Backup domain is reset.
* @param RCC_RTCCLKSource: specifies the RTC clock source. * @param RCC_RTCCLKSource: specifies the RTC clock source.
* This parameter can be one of the following values: * This parameter can be one of the following values:
@ -1269,7 +1269,7 @@ ITStatus RCC_GetITStatus(uint8_t RCC_IT)
} }
/** /**
* @brief Clears the RCC抯 interrupt pending bits. * @brief Clears the RCC's interrupt pending bits.
* @param RCC_IT: specifies the interrupt pending bit to clear. * @param RCC_IT: specifies the interrupt pending bit to clear.
* This parameter can be any combination of the following values: * This parameter can be any combination of the following values:
* @arg RCC_IT_LSIRDY: LSI ready interrupt * @arg RCC_IT_LSIRDY: LSI ready interrupt

2
bsp/wch/arm/Libraries/CH32F10x_StdPeriph_Driver/StdPeriph_Driver/src/ch32f10x_i2c.c
View File

@ -956,7 +956,7 @@ ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
/******************************************************************************* /*******************************************************************************
* Function Name : I2C_ClearITPendingBit * Function Name : I2C_ClearITPendingBit
* Description : Clears the I2Cx’s interrupt pending bits. * Description : Clears the I2Cx's interrupt pending bits.
* Input : I2Cx: where x can be 1 or 2 to select the I2C peripheral. * Input : I2Cx: where x can be 1 or 2 to select the I2C peripheral.
* I2C_IT: specifies the interrupt pending bit to clear. * I2C_IT: specifies the interrupt pending bit to clear.
* I2C_IT_SMBALERT: SMBus Alert interrupt. * I2C_IT_SMBALERT: SMBus Alert interrupt.

6
bsp/wch/risc-v/Libraries/ch32v20x_libraries/bmsis/include/core_riscv.h
View File

@ -246,9 +246,9 @@ __attribute__( ( always_inline ) ) RV_STATIC_INLINE void __WFE(void)
/******************************************************************************* /*******************************************************************************
* Function Name : SetVTFIRQ * Function Name : SetVTFIRQ
* Description : Set VTF Interrupt * Description : Set VTF Interrupt
* Input : addr<EFBFBD><EFBFBD>VTF interrupt service function base address. * Input : addr - VTF interrupt service function base address.
* IRQn<EFBFBD><EFBFBD>Interrupt Numbers * IRQn - Interrupt Numbers
* num<EFBFBD><EFBFBD>VTF Interrupt Numbers * num - VTF Interrupt Numbers
* NewState: DISABLE or ENABLE * NewState: DISABLE or ENABLE
* Return : None * Return : None
*******************************************************************************/ *******************************************************************************/

2
bsp/wch/risc-v/Libraries/ch32v20x_libraries/ch32v208_hal/include/ch32v20x.h
View File

@ -4654,7 +4654,7 @@ typedef struct
#define RB_ETH_EIE_RXIE 0x40 /* RW Receive complete interrupt enable */ #define RB_ETH_EIE_RXIE 0x40 /* RW Receive complete interrupt enable */
#define RB_ETH_EIE_LINKIE 0x10 /* RW Link Change Interrupt Enable */ #define RB_ETH_EIE_LINKIE 0x10 /* RW Link Change Interrupt Enable */
#define RB_ETH_EIE_TXIE 0x08 /* RW send complete interrupt enable */ #define RB_ETH_EIE_TXIE 0x08 /* RW send complete interrupt enable */
#define RB_ETH_EIE_R_EN50 0x04 /* RW TX 50<EFBFBD><EFBFBD> resistor adjustment. 1: On-chip 50<35><30> connected 0: On-chip 50<35><30> disconnected */ #define RB_ETH_EIE_R_EN50 0x04 /* RW TX 50Ω resistor adjustment. 1: On-chip 50Ω connected 0: On-chip 50Ω disconnected */
#define RB_ETH_EIE_TXERIE 0x02 /* RW Transmit Error Interrupt Enable */ #define RB_ETH_EIE_TXERIE 0x02 /* RW Transmit Error Interrupt Enable */
#define RB_ETH_EIE_RXERIE 0x01 /* RW1 receive error flag */ #define RB_ETH_EIE_RXERIE 0x01 /* RW1 receive error flag */
#define R8_ETH_EIR (*((volatile uint8_t *)(0x40028000+4))) /* Interrupt Flag Register */ #define R8_ETH_EIR (*((volatile uint8_t *)(0x40028000+4))) /* Interrupt Flag Register */