update cubemx

bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/CubeMX_Config.ioc

@@ -14,26 +14,29 @@ Mcu.IP2=RCC
 Mcu.IP3=SPI1
 Mcu.IP4=SYS
 Mcu.IP5=USART1
-Mcu.IP6=USB
+Mcu.IP6=USART2
-Mcu.IPNb=7
+Mcu.IP7=USB
+Mcu.IPNb=8
 Mcu.Name=STM32F103C(8-B)Tx
 Mcu.Package=LQFP48
 Mcu.Pin0=PC14-OSC32_IN
 Mcu.Pin1=PC15-OSC32_OUT
-Mcu.Pin10=PA11
+Mcu.Pin10=PA9
-Mcu.Pin11=PA12
+Mcu.Pin11=PA10
-Mcu.Pin12=PA13
+Mcu.Pin12=PA11
-Mcu.Pin13=PA14
+Mcu.Pin13=PA12
-Mcu.Pin14=VP_SYS_VS_Systick
+Mcu.Pin14=PA13
+Mcu.Pin15=PA14
+Mcu.Pin16=VP_SYS_VS_Systick
 Mcu.Pin2=PD0-OSC_IN
 Mcu.Pin3=PD1-OSC_OUT
 Mcu.Pin4=PA1
-Mcu.Pin5=PA5
+Mcu.Pin5=PA2
-Mcu.Pin6=PA6
+Mcu.Pin6=PA3
-Mcu.Pin7=PA7
+Mcu.Pin7=PA5
-Mcu.Pin8=PA9
+Mcu.Pin8=PA6
-Mcu.Pin9=PA10
+Mcu.Pin9=PA7
-Mcu.PinsNb=15
+Mcu.PinsNb=17
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F103C8Tx
@@ -61,6 +64,10 @@ PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
+PA2.Mode=Asynchronous
+PA2.Signal=USART2_TX
+PA3.Mode=Asynchronous
+PA3.Signal=USART2_RX
 PA5.Mode=Full_Duplex_Master
 PA5.Signal=SPI1_SCK
 PA6.Mode=Full_Duplex_Master
@@ -105,7 +112,7 @@ ProjectManager.StackSize=0x400
 ProjectManager.TargetToolchain=MDK-ARM V5
 ProjectManager.ToolChainLocation=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_SPI1_Init-SPI1-false-HAL-true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_SPI1_Init-SPI1-false-HAL-true,6-MX_USB_PCD_Init-USB-false-HAL-true
 RCC.ADCFreqValue=12000000
 RCC.ADCPresc=RCC_ADCPCLK2_DIV6
 RCC.AHBFreq_Value=72000000
@@ -139,6 +146,8 @@ SPI1.Mode=SPI_MODE_MASTER
 SPI1.VirtualType=VM_MASTER
 USART1.IPParameters=VirtualMode
 USART1.VirtualMode=VM_ASYNC
+USART2.IPParameters=VirtualMode
+USART2.VirtualMode=VM_ASYNC
 VP_SYS_VS_Systick.Mode=SysTick
 VP_SYS_VS_Systick.Signal=SYS_VS_Systick
 board=custom

bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Src/main.c

@@ -46,6 +46,7 @@ ADC_HandleTypeDef hadc1;
 SPI_HandleTypeDef hspi1;
 
 UART_HandleTypeDef huart1;
+UART_HandleTypeDef huart2;
 
 PCD_HandleTypeDef hpcd_USB_FS;
 
@@ -60,6 +61,7 @@ static void MX_USART1_UART_Init(void);
 static void MX_ADC1_Init(void);
 static void MX_SPI1_Init(void);
 static void MX_USB_PCD_Init(void);
+static void MX_USART2_UART_Init(void);
 /* USER CODE BEGIN PFP */
 
 /* USER CODE END PFP */
@@ -101,6 +103,7 @@ int main(void)
   MX_ADC1_Init();
   MX_SPI1_Init();
   MX_USB_PCD_Init();
+  MX_USART2_UART_Init();
   /* USER CODE BEGIN 2 */
 
   /* USER CODE END 2 */
@@ -278,6 +281,39 @@ static void MX_USART1_UART_Init(void)
 
 }
 
+/**
+  * @brief USART2 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_USART2_UART_Init(void)
+{
+
+  /* USER CODE BEGIN USART2_Init 0 */
+
+  /* USER CODE END USART2_Init 0 */
+
+  /* USER CODE BEGIN USART2_Init 1 */
+
+  /* USER CODE END USART2_Init 1 */
+  huart2.Instance = USART2;
+  huart2.Init.BaudRate = 115200;
+  huart2.Init.WordLength = UART_WORDLENGTH_8B;
+  huart2.Init.StopBits = UART_STOPBITS_1;
+  huart2.Init.Parity = UART_PARITY_NONE;
+  huart2.Init.Mode = UART_MODE_TX_RX;
+  huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart2.Init.OverSampling = UART_OVERSAMPLING_16;
+  if (HAL_UART_Init(&huart2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN USART2_Init 2 */
+
+  /* USER CODE END USART2_Init 2 */
+
+}
+
 /**
   * @brief USB Initialization Function
   * @param None

bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c

@@ -242,17 +242,23 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN USART1_MspInit 1 */
+
+  /* USER CODE END USART1_MspInit 1 */
   }
-  
+  else if(huart->Instance==USART2)
-  if(huart->Instance==USART2)
   {
+  /* USER CODE BEGIN USART2_MspInit 0 */
+
+  /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -263,7 +269,12 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN USART2_MspInit 1 */
+
+  /* USER CODE END USART2_MspInit 1 */
   }
+
 }
 
 /**
@@ -292,6 +303,24 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
 
   /* USER CODE END USART1_MspDeInit 1 */
   }
+  else if(huart->Instance==USART2)
+  {
+  /* USER CODE BEGIN USART2_MspDeInit 0 */
+
+  /* USER CODE END USART2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_USART2_CLK_DISABLE();
+
+    /**USART2 GPIO Configuration
+    PA2     ------> USART2_TX
+    PA3     ------> USART2_RX
+    */
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
+
+  /* USER CODE BEGIN USART2_MspDeInit 1 */
+
+  /* USER CODE END USART2_MspDeInit 1 */
+  }
 
 }