diff --git a/bsp/es32f0654/project.uvoptx b/bsp/es32f0654/project.uvoptx index a89435d3f3..8c76d8ba76 100644 --- a/bsp/es32f0654/project.uvoptx +++ b/bsp/es32f0654/project.uvoptx @@ -77,7 +77,7 @@ 0 1 - 0 + 255 0 1 @@ -101,6 +101,8 @@ 0 0 1 + 0 + 0 3 @@ -112,9 +114,14 @@ - Segger\JL2CM3.dll + BIN\CMSIS_AGDI.dll + + 0 + CMSIS_AGDI + -X"" -O206 -S0 -C0 -P00 -TO18 -TC10000000 -TP20 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0ES32F065x.FLM -FS00 -FL040000 -FP0($$Device:ES32F0654LT$Flash\ES32F065x.FLM) + 0 JL2CM3 @@ -165,6 +172,10 @@ + + + + diff --git a/bsp/es32f0654/project.uvprojx b/bsp/es32f0654/project.uvprojx index 3c8cc74030..797d059fd9 100644 --- a/bsp/es32f0654/project.uvprojx +++ b/bsp/es32f0654/project.uvprojx @@ -7,11 +7,12 @@ rt-thread 0x4 ARM-ADS + 0 ES32F0654LT Eastsoft - Eastsoft.ES32_DFP.1.0.1 + Eastsoft.ES32_DFP.1.0.2 http://www.essemi.com IRAM(0x20000000,0x00008000) IROM(0x00000000,0x00040000) CPUTYPE("Cortex-M0") CLOCK(12000000) ELITTLE @@ -365,7 +366,7 @@ - --keep *.o(.rti_fn.*) --keep *.o(FSymTab) + diff --git a/bsp/es32f0654/template.uvoptx b/bsp/es32f0654/template.uvoptx index a89435d3f3..8c76d8ba76 100644 --- a/bsp/es32f0654/template.uvoptx +++ b/bsp/es32f0654/template.uvoptx @@ -77,7 +77,7 @@ 0 1 - 0 + 255 0 1 @@ -101,6 +101,8 @@ 0 0 1 + 0 + 0 3 @@ -112,9 +114,14 @@ - Segger\JL2CM3.dll + BIN\CMSIS_AGDI.dll + + 0 + CMSIS_AGDI + -X"" -O206 -S0 -C0 -P00 -TO18 -TC10000000 -TP20 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0ES32F065x.FLM -FS00 -FL040000 -FP0($$Device:ES32F0654LT$Flash\ES32F065x.FLM) + 0 JL2CM3 @@ -165,6 +172,10 @@ + + + + diff --git a/bsp/es32f0654/template.uvprojx b/bsp/es32f0654/template.uvprojx index cac27e8853..760fbf78b7 100644 --- a/bsp/es32f0654/template.uvprojx +++ b/bsp/es32f0654/template.uvprojx @@ -10,11 +10,12 @@ rt-thread 0x4 ARM-ADS + 0 ES32F0654LT Eastsoft - Eastsoft.ES32_DFP.1.0.1 + Eastsoft.ES32_DFP.1.0.2 http://www.essemi.com IRAM(0x20000000,0x00008000) IROM(0x00000000,0x00040000) CPUTYPE("Cortex-M0") CLOCK(12000000) ELITTLE diff --git a/bsp/stm32/stm32f411-st-nucleo/.config b/bsp/stm32/stm32f411-st-nucleo/.config index ba35dd2786..6df7485ea9 100644 --- a/bsp/stm32/stm32f411-st-nucleo/.config +++ b/bsp/stm32/stm32f411-st-nucleo/.config @@ -63,7 +63,7 @@ CONFIG_RT_USING_DEVICE=y CONFIG_RT_USING_CONSOLE=y CONFIG_RT_CONSOLEBUF_SIZE=128 CONFIG_RT_CONSOLE_DEVICE_NAME="uart2" -CONFIG_RT_VER_NUM=0x40000 +CONFIG_RT_VER_NUM=0x40001 CONFIG_ARCH_ARM=y CONFIG_ARCH_ARM_CORTEX_M=y CONFIG_ARCH_ARM_CORTEX_M4=y @@ -113,6 +113,7 @@ CONFIG_RT_USING_DEVICE_IPC=y CONFIG_RT_PIPE_BUFSZ=512 CONFIG_RT_USING_SERIAL=y # CONFIG_RT_SERIAL_USING_DMA is not set +CONFIG_RT_SERIAL_RB_BUFSZ=64 # CONFIG_RT_USING_CAN is not set # CONFIG_RT_USING_HWTIMER is not set # CONFIG_RT_USING_CPUTIME is not set @@ -129,6 +130,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_RT_USING_SPI is not set # CONFIG_RT_USING_WDT is not set # CONFIG_RT_USING_AUDIO is not set +# CONFIG_RT_USING_SENSOR is not set # # Using WiFi @@ -313,6 +315,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -322,6 +325,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set # CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32F4=y @@ -340,6 +344,8 @@ CONFIG_SOC_STM32F411RE=y CONFIG_BSP_USING_GPIO=y CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART2=y +# CONFIG_BSP_USING_I2C1 is not set +# CONFIG_BSP_USING_PWM is not set # CONFIG_BSP_USING_ON_CHIP_FLASH is not set # diff --git a/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/.mxproject b/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/.mxproject index 8691bed235..666f79359c 100644 --- a/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/.mxproject +++ b/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/.mxproject @@ -1,7 +1,7 @@ [PreviousGenFiles] -HeaderPath=D:/repository/BspFramework/rt-thread/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Inc +HeaderPath=D:/repository/rt-thread-rtt/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Inc HeaderFiles=stm32f4xx_it.h;stm32f4xx_hal_conf.h;main.h; -SourcePath=D:/repository/BspFramework/rt-thread/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src +SourcePath=D:/repository/rt-thread-rtt/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src SourceFiles=stm32f4xx_it.c;stm32f4xx_hal_msp.c;main.c; [PreviousLibFiles] diff --git a/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc index 0428900030..81e4b8cf64 100644 --- a/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc +++ b/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc @@ -5,28 +5,34 @@ Mcu.Family=STM32F4 Mcu.IP0=NVIC Mcu.IP1=RCC Mcu.IP2=SYS -Mcu.IP3=USART2 -Mcu.IPNb=4 +Mcu.IP3=TIM3 +Mcu.IP4=USART2 +Mcu.IPNb=5 Mcu.Name=STM32F411R(C-E)Tx Mcu.Package=LQFP64 Mcu.Pin0=PC13-ANTI_TAMP Mcu.Pin1=PC14-OSC32_IN -Mcu.Pin10=PB3 -Mcu.Pin11=VP_SYS_VS_Systick +Mcu.Pin10=PB0 +Mcu.Pin11=PB1 +Mcu.Pin12=PA13 +Mcu.Pin13=PA14 +Mcu.Pin14=PB3 +Mcu.Pin15=VP_SYS_VS_Systick +Mcu.Pin16=VP_TIM3_VS_ClockSourceINT Mcu.Pin2=PC15-OSC32_OUT Mcu.Pin3=PH0 - OSC_IN Mcu.Pin4=PH1 - OSC_OUT Mcu.Pin5=PA2 Mcu.Pin6=PA3 Mcu.Pin7=PA5 -Mcu.Pin8=PA13 -Mcu.Pin9=PA14 -Mcu.PinsNb=12 +Mcu.Pin8=PA6 +Mcu.Pin9=PA7 +Mcu.PinsNb=17 Mcu.ThirdPartyNb=0 Mcu.UserConstants= Mcu.UserName=STM32F411RETx -MxCube.Version=5.0.0 -MxDb.Version=DB.5.0.0 +MxCube.Version=5.0.1 +MxDb.Version=DB.5.0.1 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true @@ -55,6 +61,10 @@ PA5.GPIOParameters=GPIO_Label PA5.GPIO_Label=LD2 [Green Led] PA5.Locked=true PA5.Signal=GPIO_Output +PA6.Signal=S_TIM3_CH1 +PA7.Signal=S_TIM3_CH2 +PB0.Signal=S_TIM3_CH3 +PB1.Signal=S_TIM3_CH4 PB3.GPIOParameters=GPIO_Label PB3.GPIO_Label=SWO PB3.Locked=true @@ -90,8 +100,8 @@ ProjectManager.BackupPrevious=false ProjectManager.CompilerOptimize=6 ProjectManager.ComputerToolchain=false ProjectManager.CoupleFile=false -ProjectManager.CustomerFirmwarePackage=..\\..\\..\\..\\..\\..\\..\\..\\board\\stm32cubefx-repo\\STM32Cube_FW_F4_V1.11.0 -ProjectManager.DefaultFWLocation=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true ProjectManager.DeletePrevious=true ProjectManager.DeviceId=STM32F411RETx ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.23.0 @@ -111,7 +121,7 @@ ProjectManager.StackSize=0x400 ProjectManager.TargetToolchain=MDK-ARM V5 ProjectManager.ToolChainLocation= ProjectManager.UnderRoot=false -ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true,4-MX_TIM3_Init-TIM3-false-HAL-true RCC.48MHZClocksFreq_Value=42000000 RCC.AHBFreq_Value=84000000 RCC.APB1CLKDivider=RCC_HCLK_DIV2 @@ -147,9 +157,24 @@ RCC.VCOOutputFreq_Value=168000000 RCC.VcooutputI2S=48000000 SH.GPXTI13.0=GPIO_EXTI13 SH.GPXTI13.ConfNb=1 +SH.S_TIM3_CH1.0=TIM3_CH1,PWM Generation1 CH1 +SH.S_TIM3_CH1.ConfNb=1 +SH.S_TIM3_CH2.0=TIM3_CH2,PWM Generation2 CH2 +SH.S_TIM3_CH2.ConfNb=1 +SH.S_TIM3_CH3.0=TIM3_CH3,PWM Generation3 CH3 +SH.S_TIM3_CH3.ConfNb=1 +SH.S_TIM3_CH4.0=TIM3_CH4,PWM Generation4 CH4 +SH.S_TIM3_CH4.ConfNb=1 +TIM3.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1 +TIM3.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2 +TIM3.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3 +TIM3.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4 +TIM3.IPParameters=Channel-PWM Generation1 CH1,Channel-PWM Generation2 CH2,Channel-PWM Generation3 CH3,Channel-PWM Generation4 CH4 USART2.IPParameters=VirtualMode USART2.VirtualMode=VM_ASYNC VP_SYS_VS_Systick.Mode=SysTick VP_SYS_VS_Systick.Signal=SYS_VS_Systick +VP_TIM3_VS_ClockSourceINT.Mode=Internal +VP_TIM3_VS_ClockSourceINT.Signal=TIM3_VS_ClockSourceINT board=NUCLEO-F411RE boardIOC=true diff --git a/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Inc/main.h b/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Inc/main.h index 47036898b7..3651f0788e 100644 --- a/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Inc/main.h +++ b/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Inc/main.h @@ -70,6 +70,8 @@ extern "C" { /* USER CODE END EM */ +void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim); + /* Exported functions prototypes ---------------------------------------------*/ void Error_Handler(void); diff --git a/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h b/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h index 15f9b6ae02..c297288600 100644 --- a/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h +++ b/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h @@ -74,7 +74,7 @@ /* #define HAL_SD_MODULE_ENABLED */ /* #define HAL_MMC_MODULE_ENABLED */ /* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_TIM_MODULE_ENABLED #define HAL_UART_MODULE_ENABLED /* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ diff --git a/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src/main.c b/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src/main.c index f934319b9d..cb90fe22eb 100644 --- a/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src/main.c +++ b/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src/main.c @@ -62,6 +62,8 @@ /* USER CODE END PM */ /* Private variables ---------------------------------------------------------*/ +TIM_HandleTypeDef htim3; + UART_HandleTypeDef huart2; /* USER CODE BEGIN PV */ @@ -72,6 +74,7 @@ UART_HandleTypeDef huart2; void SystemClock_Config(void); static void MX_GPIO_Init(void); static void MX_USART2_UART_Init(void); +static void MX_TIM3_Init(void); /* USER CODE BEGIN PFP */ /* USER CODE END PFP */ @@ -110,6 +113,7 @@ int main(void) /* Initialize all configured peripherals */ MX_GPIO_Init(); MX_USART2_UART_Init(); + MX_TIM3_Init(); /* USER CODE BEGIN 2 */ /* USER CODE END 2 */ @@ -167,6 +171,76 @@ void SystemClock_Config(void) } } +/** + * @brief TIM3 Initialization Function + * @param None + * @retval None + */ +static void MX_TIM3_Init(void) +{ + + /* USER CODE BEGIN TIM3_Init 0 */ + + /* USER CODE END TIM3_Init 0 */ + + TIM_ClockConfigTypeDef sClockSourceConfig = {0}; + TIM_MasterConfigTypeDef sMasterConfig = {0}; + TIM_OC_InitTypeDef sConfigOC = {0}; + + /* USER CODE BEGIN TIM3_Init 1 */ + + /* USER CODE END TIM3_Init 1 */ + htim3.Instance = TIM3; + htim3.Init.Prescaler = 0; + htim3.Init.CounterMode = TIM_COUNTERMODE_UP; + htim3.Init.Period = 0; + htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1; + if (HAL_TIM_Base_Init(&htim3) != HAL_OK) + { + Error_Handler(); + } + sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL; + if (HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig) != HAL_OK) + { + Error_Handler(); + } + if (HAL_TIM_PWM_Init(&htim3) != HAL_OK) + { + Error_Handler(); + } + sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET; + sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE; + if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK) + { + Error_Handler(); + } + sConfigOC.OCMode = TIM_OCMODE_PWM1; + sConfigOC.Pulse = 0; + sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH; + sConfigOC.OCFastMode = TIM_OCFAST_DISABLE; + if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_1) != HAL_OK) + { + Error_Handler(); + } + if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_2) != HAL_OK) + { + Error_Handler(); + } + if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_3) != HAL_OK) + { + Error_Handler(); + } + if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_4) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN TIM3_Init 2 */ + + /* USER CODE END TIM3_Init 2 */ + HAL_TIM_MspPostInit(&htim3); + +} + /** * @brief USART2 Initialization Function * @param None diff --git a/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c index a0b3b19ee5..0cc7029333 100644 --- a/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c +++ b/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c @@ -78,7 +78,9 @@ /* USER CODE BEGIN 0 */ /* USER CODE END 0 */ -/** + +void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim); + /** * Initializes the Global MSP. */ void HAL_MspInit(void) @@ -99,6 +101,91 @@ void HAL_MspInit(void) /* USER CODE END MspInit 1 */ } +/** +* @brief TIM_Base MSP Initialization +* This function configures the hardware resources used in this example +* @param htim_base: TIM_Base handle pointer +* @retval None +*/ +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base) +{ + + if(htim_base->Instance==TIM3) + { + /* USER CODE BEGIN TIM3_MspInit 0 */ + + /* USER CODE END TIM3_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_TIM3_CLK_ENABLE(); + /* USER CODE BEGIN TIM3_MspInit 1 */ + + /* USER CODE END TIM3_MspInit 1 */ + } + +} + +void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim) +{ + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(htim->Instance==TIM3) + { + /* USER CODE BEGIN TIM3_MspPostInit 0 */ + + /* USER CODE END TIM3_MspPostInit 0 */ + + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**TIM3 GPIO Configuration + PA6 ------> TIM3_CH1 + PA7 ------> TIM3_CH2 + PB0 ------> TIM3_CH3 + PB1 ------> TIM3_CH4 + */ + GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF2_TIM3; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF2_TIM3; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* USER CODE BEGIN TIM3_MspPostInit 1 */ + + /* USER CODE END TIM3_MspPostInit 1 */ + } + +} +/** +* @brief TIM_Base MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param htim_base: TIM_Base handle pointer +* @retval None +*/ + +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base) +{ + + if(htim_base->Instance==TIM3) + { + /* USER CODE BEGIN TIM3_MspDeInit 0 */ + + /* USER CODE END TIM3_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_TIM3_CLK_DISABLE(); + /* USER CODE BEGIN TIM3_MspDeInit 1 */ + + /* USER CODE END TIM3_MspDeInit 1 */ + } + +} + /** * @brief UART MSP Initialization * This function configures the hardware resources used in this example diff --git a/bsp/stm32/stm32f411-st-nucleo/board/Kconfig b/bsp/stm32/stm32f411-st-nucleo/board/Kconfig index 1c6ee6b39b..92402d950d 100644 --- a/bsp/stm32/stm32f411-st-nucleo/board/Kconfig +++ b/bsp/stm32/stm32f411-st-nucleo/board/Kconfig @@ -31,6 +31,50 @@ menu "On-chip Peripheral Drivers" default n endif + menuconfig BSP_USING_I2C1 + bool "Enable I2C1 BUS (software simulation)" + default n + select RT_USING_I2C + select RT_USING_I2C_BITOPS + select RT_USING_PIN + if BSP_USING_I2C1 + config BSP_I2C1_SCL_PIN + int "i2c1 scl pin number" + range 0 80 + default 30 + config BSP_I2C1_SDA_PIN + int "I2C1 sda pin number" + range 0 80 + default 31 + endif + + menuconfig BSP_USING_PWM + bool "Enable pwm" + default n + select RT_USING_PWM + if BSP_USING_PWM + menuconfig BSP_USING_PWM3 + bool "Enable timer3 output pwm" + default n + if BSP_USING_PWM3 + config BSP_USING_PWM3_CH1 + bool "Enable PWM3 channel1 (PA6)" + default n + + config BSP_USING_PWM3_CH2 + bool "Enable PWM3 channel2 (PA7)" + default n + + config BSP_USING_PWM3_CH3 + bool "Enable PWM3 channel3 (PB0)" + default n + + config BSP_USING_PWM3_CH4 + bool "Enable PWM3 channel4 (PB1)" + default n + endif + endif + config BSP_USING_ON_CHIP_FLASH bool "Enable on-chip FLASH" default n diff --git a/bsp/stm32/stm32f411-st-nucleo/board/board.c b/bsp/stm32/stm32f411-st-nucleo/board/board.c index c0fddec187..20fb37099c 100644 --- a/bsp/stm32/stm32f411-st-nucleo/board/board.c +++ b/bsp/stm32/stm32f411-st-nucleo/board/board.c @@ -21,9 +21,8 @@ void SystemClock_Config(void) __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); /**Initializes the CPU, AHB and APB busses clocks */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; - RCC_OscInitStruct.LSIState = RCC_LSI_ON; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; RCC_OscInitStruct.PLL.PLLM = 4; diff --git a/bsp/stm32/stm32f411-st-nucleo/project.uvoptx b/bsp/stm32/stm32f411-st-nucleo/project.uvoptx index 33f764fea8..f42ac67b9d 100644 --- a/bsp/stm32/stm32f411-st-nucleo/project.uvoptx +++ b/bsp/stm32/stm32f411-st-nucleo/project.uvoptx @@ -73,7 +73,7 @@ 0 - 1 + 0 0 1 @@ -181,767 +181,11 @@ - Applications - 1 - 0 - 0 - 0 - - 1 - 1 - 1 - 0 - 0 - 0 - applications\main.c - main.c - 0 - 0 - - - - - Drivers + Source Group 1 0 0 0 0 - - 2 - 2 - 1 - 0 - 0 - 0 - board\board.c - board.c - 0 - 0 - - - 2 - 3 - 1 - 0 - 0 - 0 - board\CubeMX_Config\Src\stm32f4xx_hal_msp.c - stm32f4xx_hal_msp.c - 0 - 0 - - - 2 - 4 - 2 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\arm\startup_stm32f411xe.s - startup_stm32f411xe.s - 0 - 0 - - - 2 - 5 - 1 - 0 - 0 - 0 - ..\libraries\HAL_Drivers\drv_gpio.c - drv_gpio.c - 0 - 0 - - - 2 - 6 - 1 - 0 - 0 - 0 - ..\libraries\HAL_Drivers\drv_usart.c - drv_usart.c - 0 - 0 - - - 2 - 7 - 1 - 0 - 0 - 0 - ..\libraries\HAL_Drivers\drv_common.c - drv_common.c - 0 - 0 - - - - - Kernel - 0 - 0 - 0 - 0 - - 3 - 8 - 1 - 0 - 0 - 0 - ..\..\..\src\clock.c - clock.c - 0 - 0 - - - 3 - 9 - 1 - 0 - 0 - 0 - ..\..\..\src\components.c - components.c - 0 - 0 - - - 3 - 10 - 1 - 0 - 0 - 0 - ..\..\..\src\cpu.c - cpu.c - 0 - 0 - - - 3 - 11 - 1 - 0 - 0 - 0 - ..\..\..\src\device.c - device.c - 0 - 0 - - - 3 - 12 - 1 - 0 - 0 - 0 - ..\..\..\src\idle.c - idle.c - 0 - 0 - - - 3 - 13 - 1 - 0 - 0 - 0 - ..\..\..\src\ipc.c - ipc.c - 0 - 0 - - - 3 - 14 - 1 - 0 - 0 - 0 - ..\..\..\src\irq.c - irq.c - 0 - 0 - - - 3 - 15 - 1 - 0 - 0 - 0 - ..\..\..\src\kservice.c - kservice.c - 0 - 0 - - - 3 - 16 - 1 - 0 - 0 - 0 - ..\..\..\src\mem.c - mem.c - 0 - 0 - - - 3 - 17 - 1 - 0 - 0 - 0 - ..\..\..\src\mempool.c - mempool.c - 0 - 0 - - - 3 - 18 - 1 - 0 - 0 - 0 - ..\..\..\src\object.c - object.c - 0 - 0 - - - 3 - 19 - 1 - 0 - 0 - 0 - ..\..\..\src\scheduler.c - scheduler.c - 0 - 0 - - - 3 - 20 - 1 - 0 - 0 - 0 - ..\..\..\src\signal.c - signal.c - 0 - 0 - - - 3 - 21 - 1 - 0 - 0 - 0 - ..\..\..\src\thread.c - thread.c - 0 - 0 - - - 3 - 22 - 1 - 0 - 0 - 0 - ..\..\..\src\timer.c - timer.c - 0 - 0 - - - - - CORTEX-M4 - 0 - 0 - 0 - 0 - - 4 - 23 - 1 - 0 - 0 - 0 - ..\..\..\libcpu\arm\cortex-m4\cpuport.c - cpuport.c - 0 - 0 - - - 4 - 24 - 2 - 0 - 0 - 0 - ..\..\..\libcpu\arm\cortex-m4\context_rvds.S - context_rvds.S - 0 - 0 - - - 4 - 25 - 1 - 0 - 0 - 0 - ..\..\..\libcpu\arm\common\backtrace.c - backtrace.c - 0 - 0 - - - 4 - 26 - 1 - 0 - 0 - 0 - ..\..\..\libcpu\arm\common\div0.c - div0.c - 0 - 0 - - - 4 - 27 - 1 - 0 - 0 - 0 - ..\..\..\libcpu\arm\common\showmem.c - showmem.c - 0 - 0 - - - - - DeviceDrivers - 0 - 0 - 0 - 0 - - 5 - 28 - 1 - 0 - 0 - 0 - ..\..\..\components\drivers\misc\pin.c - pin.c - 0 - 0 - - - 5 - 29 - 1 - 0 - 0 - 0 - ..\..\..\components\drivers\serial\serial.c - serial.c - 0 - 0 - - - 5 - 30 - 1 - 0 - 0 - 0 - ..\..\..\components\drivers\src\completion.c - completion.c - 0 - 0 - - - 5 - 31 - 1 - 0 - 0 - 0 - ..\..\..\components\drivers\src\dataqueue.c - dataqueue.c - 0 - 0 - - - 5 - 32 - 1 - 0 - 0 - 0 - ..\..\..\components\drivers\src\pipe.c - pipe.c - 0 - 0 - - - 5 - 33 - 1 - 0 - 0 - 0 - ..\..\..\components\drivers\src\ringblk_buf.c - ringblk_buf.c - 0 - 0 - - - 5 - 34 - 1 - 0 - 0 - 0 - ..\..\..\components\drivers\src\ringbuffer.c - ringbuffer.c - 0 - 0 - - - 5 - 35 - 1 - 0 - 0 - 0 - ..\..\..\components\drivers\src\waitqueue.c - waitqueue.c - 0 - 0 - - - 5 - 36 - 1 - 0 - 0 - 0 - ..\..\..\components\drivers\src\workqueue.c - workqueue.c - 0 - 0 - - - - - finsh - 0 - 0 - 0 - 0 - - 6 - 37 - 1 - 0 - 0 - 0 - ..\..\..\components\finsh\shell.c - shell.c - 0 - 0 - - - 6 - 38 - 1 - 0 - 0 - 0 - ..\..\..\components\finsh\symbol.c - symbol.c - 0 - 0 - - - 6 - 39 - 1 - 0 - 0 - 0 - ..\..\..\components\finsh\cmd.c - cmd.c - 0 - 0 - - - 6 - 40 - 1 - 0 - 0 - 0 - ..\..\..\components\finsh\msh.c - msh.c - 0 - 0 - - - 6 - 41 - 1 - 0 - 0 - 0 - ..\..\..\components\finsh\msh_cmd.c - msh_cmd.c - 0 - 0 - - - 6 - 42 - 1 - 0 - 0 - 0 - ..\..\..\components\finsh\msh_file.c - msh_file.c - 0 - 0 - - - - - STM32_HAL - 0 - 0 - 0 - 0 - - 7 - 43 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c - system_stm32f4xx.c - 0 - 0 - - - 7 - 44 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c - stm32f4xx_hal.c - 0 - 0 - - - 7 - 45 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c - stm32f4xx_hal_cec.c - 0 - 0 - - - 7 - 46 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c - stm32f4xx_hal_cortex.c - 0 - 0 - - - 7 - 47 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c - stm32f4xx_hal_crc.c - 0 - 0 - - - 7 - 48 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c - stm32f4xx_hal_cryp.c - 0 - 0 - - - 7 - 49 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c - stm32f4xx_hal_cryp_ex.c - 0 - 0 - - - 7 - 50 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c - stm32f4xx_hal_dma.c - 0 - 0 - - - 7 - 51 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c - stm32f4xx_hal_dma_ex.c - 0 - 0 - - - 7 - 52 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c - stm32f4xx_hal_pwr.c - 0 - 0 - - - 7 - 53 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c - stm32f4xx_hal_pwr_ex.c - 0 - 0 - - - 7 - 54 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c - stm32f4xx_hal_rcc.c - 0 - 0 - - - 7 - 55 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c - stm32f4xx_hal_rcc_ex.c - 0 - 0 - - - 7 - 56 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c - stm32f4xx_hal_rng.c - 0 - 0 - - - 7 - 57 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c - stm32f4xx_hal_gpio.c - 0 - 0 - - - 7 - 58 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c - stm32f4xx_hal_uart.c - 0 - 0 - - - 7 - 59 - 1 - 0 - 0 - 0 - ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c - stm32f4xx_hal_usart.c - 0 - 0 - diff --git a/bsp/stm32/stm32f411-st-nucleo/project.uvprojx b/bsp/stm32/stm32f411-st-nucleo/project.uvprojx index 735e620c46..07ec689639 100644 --- a/bsp/stm32/stm32f411-st-nucleo/project.uvprojx +++ b/bsp/stm32/stm32f411-st-nucleo/project.uvprojx @@ -1,10 +1,7 @@ - 2.1 -
### uVision Project, (C) Keil Software
- rtthread @@ -19,28 +16,28 @@ Keil.STM32F4xx_DFP.2.12.0 http://www.keil.com/pack IRAM(0x20000000,0x00020000) IROM(0x08000000,0x00080000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE - - + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_512 -FS08000000 -FL080000 -FP0($$Device:STM32F411RETx$CMSIS\Flash\STM32F4xx_512.FLM)) 0 $$Device:STM32F411RETx$Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h - - - - - - - - - + + + + + + + + + $$Device:STM32F411RETx$CMSIS\SVD\STM32F411xx.svd 0 0 - - - - - + + + + + 0 0 @@ -62,8 +59,8 @@ 0 0 - - + + 0 0 0 @@ -72,8 +69,8 @@ 0 0 - - + + 0 0 0 @@ -83,14 +80,14 @@ 1 0 fromelf --bin !L --output rtthread.bin - + 0 0 0 0 0 - + 0 @@ -104,8 +101,8 @@ 0 0 3 - - + + 1 @@ -138,11 +135,11 @@ 1 BIN\UL2CM3.DLL - - - - - + + + + + 0 @@ -175,7 +172,7 @@ 0 0 "Cortex-M4" - + 0 0 0 @@ -307,7 +304,7 @@ 0x0 - + 1 @@ -333,10 +330,10 @@ 0 0 - + USE_HAL_DRIVER, STM32F411xE - - applications;.;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\include;..\..\..\libcpu\arm\cortex-m4;..\..\..\libcpu\arm\common;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\libraries\STM32F4xx_HAL\CMSIS\Include + + .;..\..\..\include;applications;.;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\libraries\STM32F4xx_HAL\CMSIS\Include @@ -351,10 +348,10 @@ 0 0 - - - - + + + + @@ -366,17 +363,125 @@ 0 0x08000000 0x20000000 - + .\board\linker_scripts\link.sct - - - --keep *.o(.rti_fn.*) --keep *.o(FSymTab) - - + + + + + + + Kernel + + + clock.c + 1 + ..\..\..\src\clock.c + + + + + components.c + 1 + ..\..\..\src\components.c + + + + + cpu.c + 1 + ..\..\..\src\cpu.c + + + + + device.c + 1 + ..\..\..\src\device.c + + + + + idle.c + 1 + ..\..\..\src\idle.c + + + + + ipc.c + 1 + ..\..\..\src\ipc.c + + + + + irq.c + 1 + ..\..\..\src\irq.c + + + + + kservice.c + 1 + ..\..\..\src\kservice.c + + + + + mem.c + 1 + ..\..\..\src\mem.c + + + + + mempool.c + 1 + ..\..\..\src\mempool.c + + + + + object.c + 1 + ..\..\..\src\object.c + + + + + scheduler.c + 1 + ..\..\..\src\scheduler.c + + + + + signal.c + 1 + ..\..\..\src\signal.c + + + + + thread.c + 1 + ..\..\..\src\thread.c + + + + + timer.c + 1 + ..\..\..\src\timer.c + + + Applications @@ -395,26 +500,36 @@ 1 board\board.c + + stm32f4xx_hal_msp.c 1 board\CubeMX_Config\Src\stm32f4xx_hal_msp.c + + startup_stm32f411xe.s 2 ..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\arm\startup_stm32f411xe.s + + drv_gpio.c 1 ..\libraries\HAL_Drivers\drv_gpio.c + + drv_usart.c 1 ..\libraries\HAL_Drivers\drv_usart.c + + drv_common.c 1 @@ -423,113 +538,41 @@ - Kernel + cpu - clock.c + backtrace.c 1 - ..\..\..\src\clock.c - - - components.c - 1 - ..\..\..\src\components.c - - - cpu.c - 1 - ..\..\..\src\cpu.c - - - device.c - 1 - ..\..\..\src\device.c - - - idle.c - 1 - ..\..\..\src\idle.c - - - ipc.c - 1 - ..\..\..\src\ipc.c - - - irq.c - 1 - ..\..\..\src\irq.c - - - kservice.c - 1 - ..\..\..\src\kservice.c - - - mem.c - 1 - ..\..\..\src\mem.c - - - mempool.c - 1 - ..\..\..\src\mempool.c - - - object.c - 1 - ..\..\..\src\object.c - - - scheduler.c - 1 - ..\..\..\src\scheduler.c - - - signal.c - 1 - ..\..\..\src\signal.c - - - thread.c - 1 - ..\..\..\src\thread.c - - - timer.c - 1 - ..\..\..\src\timer.c + ..\..\..\libcpu\arm\common\backtrace.c + + + + + div0.c + 1 + ..\..\..\libcpu\arm\common\div0.c + + + + + showmem.c + 1 + ..\..\..\libcpu\arm\common\showmem.c - - - CORTEX-M4 cpuport.c 1 ..\..\..\libcpu\arm\cortex-m4\cpuport.c + + context_rvds.S 2 ..\..\..\libcpu\arm\cortex-m4\context_rvds.S - - backtrace.c - 1 - ..\..\..\libcpu\arm\common\backtrace.c - - - div0.c - 1 - ..\..\..\libcpu\arm\common\div0.c - - - showmem.c - 1 - ..\..\..\libcpu\arm\common\showmem.c - @@ -540,41 +583,57 @@ 1 ..\..\..\components\drivers\misc\pin.c + + serial.c 1 ..\..\..\components\drivers\serial\serial.c + + completion.c 1 ..\..\..\components\drivers\src\completion.c + + dataqueue.c 1 ..\..\..\components\drivers\src\dataqueue.c + + pipe.c 1 ..\..\..\components\drivers\src\pipe.c + + ringblk_buf.c 1 ..\..\..\components\drivers\src\ringblk_buf.c + + ringbuffer.c 1 ..\..\..\components\drivers\src\ringbuffer.c + + waitqueue.c 1 ..\..\..\components\drivers\src\waitqueue.c + + workqueue.c 1 @@ -590,26 +649,36 @@ 1 ..\..\..\components\finsh\shell.c + + symbol.c 1 ..\..\..\components\finsh\symbol.c + + cmd.c 1 ..\..\..\components\finsh\cmd.c + + msh.c 1 ..\..\..\components\finsh\msh.c + + msh_cmd.c 1 ..\..\..\components\finsh\msh_cmd.c + + msh_file.c 1 @@ -625,81 +694,113 @@ 1 ..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c + + stm32f4xx_hal.c 1 ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c + + stm32f4xx_hal_cec.c 1 ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c + + stm32f4xx_hal_cortex.c 1 ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c + + stm32f4xx_hal_crc.c 1 ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c + + stm32f4xx_hal_cryp.c 1 ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c + + stm32f4xx_hal_cryp_ex.c 1 ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c + + stm32f4xx_hal_dma.c 1 ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c + + stm32f4xx_hal_dma_ex.c 1 ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c + + stm32f4xx_hal_pwr.c 1 ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c + + stm32f4xx_hal_pwr_ex.c 1 ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c + + stm32f4xx_hal_rcc.c 1 ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c + + stm32f4xx_hal_rcc_ex.c 1 ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c + + stm32f4xx_hal_rng.c 1 ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c + + stm32f4xx_hal_gpio.c 1 ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c + + stm32f4xx_hal_uart.c 1 ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c + + stm32f4xx_hal_usart.c 1 @@ -710,11 +811,9 @@ - - - - + + + - diff --git a/bsp/stm32/stm32f411-st-nucleo/rtconfig.h b/bsp/stm32/stm32f411-st-nucleo/rtconfig.h index 4c8e05dd2e..1d7b6ca3f0 100644 --- a/bsp/stm32/stm32f411-st-nucleo/rtconfig.h +++ b/bsp/stm32/stm32f411-st-nucleo/rtconfig.h @@ -39,7 +39,7 @@ #define RT_USING_CONSOLE #define RT_CONSOLEBUF_SIZE 128 #define RT_CONSOLE_DEVICE_NAME "uart2" -#define RT_VER_NUM 0x40000 +#define RT_VER_NUM 0x40001 #define ARCH_ARM #define ARCH_ARM_CORTEX_M #define ARCH_ARM_CORTEX_M4 @@ -78,6 +78,7 @@ #define RT_USING_DEVICE_IPC #define RT_PIPE_BUFSZ 512 #define RT_USING_SERIAL +#define RT_SERIAL_RB_BUFSZ 64 #define RT_USING_PIN /* Using WiFi */