[arduino][stm32f407-robomaster-c] 对接RTduino (#6759)
This commit is contained in:
螺丝松掉的人
GitHub
parent
8ade08799b
commit
ba2d7ba4c0
|
|
@ -1,9 +1,12 @@
|
|||
from building import *
|
||||
import os
|
||||
|
||||
cwd = GetCurrentDir()
|
||||
src = Glob('*.c')
|
||||
cwd = GetCurrentDir()
|
||||
CPPPATH = [cwd]
|
||||
src = Glob('*.c')
|
||||
|
||||
if GetDepend(['PKG_USING_RTDUINO']) and not GetDepend(['RTDUINO_NO_SETUP_LOOP']):
|
||||
src += ['arduino_main.cpp']
|
||||
|
||||
group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,24 @@
|
|||
/*
|
||||
* Copyright (c) 2006-2022, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2022-12-20 default first version
|
||||
*/
|
||||
|
||||
#include <Arduino.h>
|
||||
|
||||
void setup(void)
|
||||
{
|
||||
/* put your setup code here, to run once: */
|
||||
pinMode(LED_BUILTIN, OUTPUT);
|
||||
}
|
||||
|
||||
void loop(void)
|
||||
{
|
||||
/* put your main code here, to run repeatedly: */
|
||||
digitalWrite(LED_BUILTIN, !digitalRead(LED_BUILTIN));
|
||||
delay(100);
|
||||
}
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
# xxx 开发板的Arduino生态兼容说明
|
||||
|
||||
## 1 RTduino - RT-Thread的Arduino生态兼容层
|
||||
|
||||
stm32f407-robomaster-c 开发板已经完整适配了[RTduino软件包](https://github.com/RTduino/RTduino)，即RT-Thread的Arduino生态兼容层。用户可以按照Arduino的编程习惯来操作该BSP，并且可以使用大量Arduino社区丰富的库，是对RT-Thread生态的极大增强。更多信息，请参见[RTduino软件包说明文档](https://github.com/RTduino/RTduino)。
|
||||
|
||||
### 1.1 如何开启针对本BSP的Arduino生态兼容层
|
||||
|
||||
Env 工具下敲入 menuconfig 命令，或者 RT-Thread Studio IDE 下选择 RT-Thread Settings：
|
||||
|
||||
```Kconfig
|
||||
Hardware Drivers Config --->
|
||||
Onboard Peripheral Drivers --->
|
||||
[*] Compatible with Arduino Ecosystem (RTduino)
|
||||
```
|
||||
|
||||
## 2 Arduino引脚排布
|
||||
|
||||
更多引脚布局相关信息参见 [pins_arduino.c](pins_arduino.c) 和 [pins_arduino.h](pins_arduino.h)。
|
||||
|
||||
|
||||
| Arduino引脚编号 | STM32引脚编号 | 5V容忍 | 备注 |
|
||||
| ------------------- | --------- | ---- | ------------------------------------------------------------------------- |
|
||||
| 0 (D0) | PH11 | 是/否 | 板载用户LED |
|
||||
| 1 (D1) | PB7 | 是/否 | Serial-RX，默认被RT-Thread的UART设备框架uart1接管 |
|
||||
| 2 (D2) | PA9 | 是/否 | Serial-TX，默认被RT-Thread的UART设备框架uart1接管 |
|
||||
| 3 (D3) | PG9 | 是/否 | Serial-RX，默认被RT-Thread的UART设备框架uart6接管 |
|
||||
| 4 (D4) | PG14 | 是/否 | Serial-TX，默认被RT-Thread的UART设备框架uart6接管 |
|
||||
| 5 (D5) | PB0 | 是/否 | I2C1-SCL，默认被RT-Thread的I2C设备框架i2c1接管 |
|
||||
| 6 (D6) | PB0 | 是/否 | I2C1-SDA，默认被RT-Thread的I2C设备框架i2c1接管 |
|
||||
| 7 (D7) | PE9 | 是/否 | PWM1-CH1，默认被RT-Thread的PWM设备框架pwm1接管 |
|
||||
| 8 (D8) | PE11 | 是/否 | PWM1-CH2，默认被RT-Thread的PWM设备框架pwm1接管 |
|
||||
| 9 (D9) | PE13 | 是/否 | PWM1-CH3，默认被RT-Thread的PWM设备框架pwm1接管 |
|
||||
| 10 (D10) | PE14 | 是/否 | PWM1-CH4，默认被RT-Thread的PWM设备框架pwm1接管 |
|
||||
| 11 (D11) | PE14 | 是/否 | PWM1-CH4，默认被RT-Thread的PWM设备框架pwm1接管 |
|
||||
| 12 (D12) | PC6 | 是/否 | PWM8-CH1，默认被RT-Thread的PWM设备框架pwm8接管 |
|
||||
| 13 (D13) | PI6 | 是/否 | PWM8-CH2，默认被RT-Thread的PWM设备框架pwm8接管 |
|
||||
| 14 (D14) | PI7 | 是/否 | PWM8-CH3，默认被RT-Thread的PWM设备框架pwm8接管 |
|
||||
| 15 (A0) | -- | | 芯片内部温度 ADC，默认被RT-Thread的ADC设备框架adc1接管 |
|
||||
| 16 (A1) | -- | | 芯片内部参考电压 ADC，默认被RT-Thread的ADC设备框架adc1接管 |
|
||||
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
from building import *
|
||||
|
||||
cwd = GetCurrentDir()
|
||||
src = Glob('*.c') + Glob('*.cpp')
|
||||
inc = [cwd]
|
||||
|
||||
group = DefineGroup('RTduino', src, depend = ['PKG_USING_RTDUINO'], CPPPATH = inc)
|
||||
|
||||
Return('group')
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
* Copyright (c) 2006-2022, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2022-12-20 default first version
|
||||
*/
|
||||
|
||||
#include <Arduino.h>
|
||||
#include <board.h>
|
||||
#include "pins_arduino.h"
|
||||
|
||||
/*
|
||||
* {Arduino Pin, RT-Thread Pin [, Device Name, Channel]}
|
||||
* [] means optional
|
||||
* Digital pins must NOT give the device name and channel.
|
||||
* Analog pins MUST give the device name and channel(ADC, PWM or DAC).
|
||||
* Arduino Pin must keep in sequence.
|
||||
*/
|
||||
const pin_map_t pin_map_table[]=
|
||||
{
|
||||
{D0, GET_PIN(H,11)}, /* LED_BUILTIN */
|
||||
{D1, GET_PIN(B,7), "uart1"}, /* Serial-RX */
|
||||
{D2, GET_PIN(A,9), "uart1"}, /* Serial-TX */
|
||||
{D3, GET_PIN(G,9), "uart6"}, /* Serial-RX */
|
||||
{D4, GET_PIN(G,14), "uart6"}, /* Serial-TX */
|
||||
{D5, GET_PIN(B,0), "i2c1"}, /* I2C-SCL (Wire) */
|
||||
{D6, GET_PIN(B,0), "i2c1"}, /* I2C-SDA (Wire) */
|
||||
{D7, GET_PIN(E,9), "pwm1", 1}, /* PWM */
|
||||
{D8, GET_PIN(E,11), "pwm1", 2}, /* PWM */
|
||||
{D9, GET_PIN(E,13), "pwm1", 3}, /* PWM */
|
||||
{D10, GET_PIN(E,14), "pwm1", 4}, /* PWM */
|
||||
{D11, GET_PIN(E,14), "pwm1", 4}, /* PWM */
|
||||
{D12, GET_PIN(C,6), "pwm8", 1}, /* PWM */
|
||||
{D13, GET_PIN(I,6), "pwm8", 2}, /* PWM */
|
||||
{D14, GET_PIN(I,7), "pwm8", 3}, /* PWM */
|
||||
{A0, RT_NULL, "adc1", 18}, /* ADC, On-Chip: internal temperature sensor, ADC_CHANNEL_TEMPSENSOR */
|
||||
{A1, RT_NULL, "adc1", 17}, /* ADC, On-Chip: internal reference voltage, ADC_CHANNEL_VREFINT */
|
||||
};
|
||||
|
|
@ -0,0 +1,40 @@
|
|||
/*
|
||||
* Copyright (c) 2006-2022, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2022-12-20 default first version
|
||||
*/
|
||||
|
||||
#ifndef Pins_Arduino_h
|
||||
#define Pins_Arduino_h
|
||||
|
||||
/* pins alias. Must keep in sequence */
|
||||
#define D0 (0)
|
||||
#define D1 (1)
|
||||
#define D2 (2)
|
||||
#define D3 (3)
|
||||
#define D4 (4)
|
||||
#define D5 (5)
|
||||
#define D6 (6)
|
||||
#define D7 (7)
|
||||
#define D8 (8)
|
||||
#define D9 (9)
|
||||
#define D10 (10)
|
||||
#define D11 (11)
|
||||
#define D12 (12)
|
||||
#define D13 (13)
|
||||
#define D14 (14)
|
||||
#define A0 (15)
|
||||
#define A1 (16)
|
||||
|
||||
#define F_CPU 168000000L /* CPU:168MHz */
|
||||
|
||||
#define LED_BUILTIN D0 /* Default Built-in LED */
|
||||
|
||||
/* i2c1 : PF0-SDA PF1-SCL */
|
||||
#define RTDUINO_DEFAULT_IIC_BUS_NAME "i2c1"
|
||||
|
||||
#endif /* Pins_Arduino_h */
|
||||
File diff suppressed because one or more lines are too long
|
|
@ -1,9 +1,18 @@
|
|||
#MicroXplorer Configuration settings - do not modify
|
||||
ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_TEMPSENSOR
|
||||
ADC1.IPParameters=Rank-0\#ChannelRegularConversion,master,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag
|
||||
ADC1.NbrOfConversionFlag=1
|
||||
ADC1.Rank-0\#ChannelRegularConversion=1
|
||||
ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_3CYCLES
|
||||
ADC1.master=1
|
||||
ADC3.Channel-1\#ChannelRegularConversion=ADC_CHANNEL_8
|
||||
ADC3.IPParameters=Rank-1\#ChannelRegularConversion,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,NbrOfConversionFlag
|
||||
ADC3.NbrOfConversionFlag=1
|
||||
ADC3.Rank-1\#ChannelRegularConversion=1
|
||||
ADC3.SamplingTime-1\#ChannelRegularConversion=ADC_SAMPLETIME_3CYCLES
|
||||
CAD.formats=
|
||||
CAD.pinconfig=
|
||||
CAD.provider=
|
||||
CAN1.BS1=CAN_BS1_1TQ
|
||||
CAN1.BS2=CAN_BS2_1TQ
|
||||
CAN1.CalculateBaudRate=875000
|
||||
|
|
@ -17,23 +26,25 @@ CAN2.CalculateTimeBit=1142
|
|||
CAN2.CalculateTimeQuantum=380.95238095238096
|
||||
CAN2.IPParameters=CalculateTimeQuantum,CalculateTimeBit,CalculateBaudRate,BS1,BS2
|
||||
File.Version=6
|
||||
GPIO.groupedBy=
|
||||
GPIO.groupedBy=Group By Peripherals
|
||||
KeepUserPlacement=false
|
||||
Mcu.CPN=STM32F407IGH6
|
||||
Mcu.Family=STM32F4
|
||||
Mcu.IP0=ADC3
|
||||
Mcu.IP1=CAN1
|
||||
Mcu.IP10=USART3
|
||||
Mcu.IP11=USART6
|
||||
Mcu.IP2=CAN2
|
||||
Mcu.IP3=NVIC
|
||||
Mcu.IP4=RCC
|
||||
Mcu.IP5=SYS
|
||||
Mcu.IP6=TIM1
|
||||
Mcu.IP7=TIM4
|
||||
Mcu.IP8=TIM8
|
||||
Mcu.IP9=USART1
|
||||
Mcu.IPNb=12
|
||||
Mcu.IP0=ADC1
|
||||
Mcu.IP1=ADC3
|
||||
Mcu.IP10=TIM8
|
||||
Mcu.IP11=USART1
|
||||
Mcu.IP12=USART3
|
||||
Mcu.IP13=USART6
|
||||
Mcu.IP2=CAN1
|
||||
Mcu.IP3=CAN2
|
||||
Mcu.IP4=I2C2
|
||||
Mcu.IP5=NVIC
|
||||
Mcu.IP6=RCC
|
||||
Mcu.IP7=SYS
|
||||
Mcu.IP8=TIM1
|
||||
Mcu.IP9=TIM4
|
||||
Mcu.IPNb=14
|
||||
Mcu.Name=STM32F407I(E-G)Hx
|
||||
Mcu.Package=UFBGA176
|
||||
Mcu.Pin0=PB5
|
||||
|
|
@ -41,29 +52,33 @@ Mcu.Pin1=PG14
|
|||
Mcu.Pin10=PI6
|
||||
Mcu.Pin11=PG9
|
||||
Mcu.Pin12=PD1
|
||||
Mcu.Pin13=PA9
|
||||
Mcu.Pin14=PH0-OSC_IN
|
||||
Mcu.Pin15=PH1-OSC_OUT
|
||||
Mcu.Pin16=PC6
|
||||
Mcu.Pin17=PF10
|
||||
Mcu.Pin18=PD14
|
||||
Mcu.Pin19=PE13
|
||||
Mcu.Pin13=PF0
|
||||
Mcu.Pin14=PA9
|
||||
Mcu.Pin15=PH0-OSC_IN
|
||||
Mcu.Pin16=PH1-OSC_OUT
|
||||
Mcu.Pin17=PF1
|
||||
Mcu.Pin18=PC6
|
||||
Mcu.Pin19=PF10
|
||||
Mcu.Pin2=PA14
|
||||
Mcu.Pin20=PE9
|
||||
Mcu.Pin21=PE11
|
||||
Mcu.Pin22=PE14
|
||||
Mcu.Pin23=VP_SYS_VS_Systick
|
||||
Mcu.Pin24=VP_TIM1_VS_ClockSourceINT
|
||||
Mcu.Pin25=VP_TIM4_VS_ClockSourceINT
|
||||
Mcu.Pin26=VP_TIM8_VS_ClockSourceINT
|
||||
Mcu.Pin20=PD14
|
||||
Mcu.Pin21=PE13
|
||||
Mcu.Pin22=PE9
|
||||
Mcu.Pin23=PE11
|
||||
Mcu.Pin24=PE14
|
||||
Mcu.Pin25=VP_ADC1_TempSens_Input
|
||||
Mcu.Pin26=VP_ADC1_Vref_Input
|
||||
Mcu.Pin27=VP_SYS_VS_Systick
|
||||
Mcu.Pin28=VP_TIM1_VS_ClockSourceINT
|
||||
Mcu.Pin29=VP_TIM4_VS_ClockSourceINT
|
||||
Mcu.Pin3=PA13
|
||||
Mcu.Pin30=VP_TIM8_VS_ClockSourceINT
|
||||
Mcu.Pin4=PB7
|
||||
Mcu.Pin5=PB6
|
||||
Mcu.Pin6=PD0
|
||||
Mcu.Pin7=PC11
|
||||
Mcu.Pin8=PC10
|
||||
Mcu.Pin9=PI7
|
||||
Mcu.PinsNb=27
|
||||
Mcu.PinsNb=31
|
||||
Mcu.ThirdPartyNb=0
|
||||
Mcu.UserConstants=
|
||||
Mcu.UserName=STM32F407IGHx
|
||||
|
|
@ -117,6 +132,10 @@ PE14.Locked=true
|
|||
PE14.Signal=S_TIM1_CH4
|
||||
PE9.Locked=true
|
||||
PE9.Signal=S_TIM1_CH1
|
||||
PF0.Mode=I2C
|
||||
PF0.Signal=I2C2_SDA
|
||||
PF1.Mode=I2C
|
||||
PF1.Signal=I2C2_SCL
|
||||
PF10.Locked=true
|
||||
PF10.Mode=IN8
|
||||
PF10.Signal=ADC3_IN8
|
||||
|
|
@ -159,7 +178,7 @@ ProjectManager.StackSize=0x400
|
|||
ProjectManager.TargetToolchain=MDK-ARM V5
|
||||
ProjectManager.ToolChainLocation=
|
||||
ProjectManager.UnderRoot=false
|
||||
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_ADC3_Init-ADC3-false-HAL-true,5-MX_CAN1_Init-CAN1-false-HAL-true,6-MX_CAN2_Init-CAN2-false-HAL-true,7-MX_TIM1_Init-TIM1-false-HAL-true,8-MX_TIM4_Init-TIM4-false-HAL-true,9-MX_TIM8_Init-TIM8-false-HAL-true,10-MX_USART3_UART_Init-USART3-false-HAL-true,11-MX_USART6_UART_Init-USART6-false-HAL-true
|
||||
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_ADC3_Init-ADC3-false-HAL-true,5-MX_CAN1_Init-CAN1-false-HAL-true,6-MX_CAN2_Init-CAN2-false-HAL-true,7-MX_TIM1_Init-TIM1-false-HAL-true,8-MX_TIM4_Init-TIM4-false-HAL-true,9-MX_TIM8_Init-TIM8-false-HAL-true,10-MX_USART3_UART_Init-USART3-false-HAL-true,11-MX_USART6_UART_Init-USART6-false-HAL-true,12-MX_ADC1_Init-ADC1-false-HAL-true
|
||||
RCC.48MHZClocksFreq_Value=84000000
|
||||
RCC.AHBFreq_Value=168000000
|
||||
RCC.APB1CLKDivider=RCC_HCLK_DIV4
|
||||
|
|
@ -226,6 +245,10 @@ USART3.IPParameters=VirtualMode
|
|||
USART3.VirtualMode=VM_ASYNC
|
||||
USART6.IPParameters=VirtualMode
|
||||
USART6.VirtualMode=VM_ASYNC
|
||||
VP_ADC1_TempSens_Input.Mode=IN-TempSens
|
||||
VP_ADC1_TempSens_Input.Signal=ADC1_TempSens_Input
|
||||
VP_ADC1_Vref_Input.Mode=IN-Vrefint
|
||||
VP_ADC1_Vref_Input.Signal=ADC1_Vref_Input
|
||||
VP_SYS_VS_Systick.Mode=SysTick
|
||||
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
|
||||
VP_TIM1_VS_ClockSourceINT.Mode=Internal
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@
|
|||
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||
/* #define HAL_HASH_MODULE_ENABLED */
|
||||
/* #define HAL_I2C_MODULE_ENABLED */
|
||||
#define HAL_I2C_MODULE_ENABLED
|
||||
/* #define HAL_I2S_MODULE_ENABLED */
|
||||
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||
/* #define HAL_LTDC_MODULE_ENABLED */
|
||||
|
|
@ -62,7 +62,7 @@
|
|||
/* #define HAL_SAI_MODULE_ENABLED */
|
||||
/* #define HAL_SD_MODULE_ENABLED */
|
||||
/* #define HAL_MMC_MODULE_ENABLED */
|
||||
#define HAL_SPI_MODULE_ENABLED
|
||||
/* #define HAL_SPI_MODULE_ENABLED */
|
||||
#define HAL_TIM_MODULE_ENABLED
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
|
|
|
|||
|
|
@ -1,728 +0,0 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2022 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
ADC_HandleTypeDef hadc3;
|
||||
|
||||
CAN_HandleTypeDef hcan1;
|
||||
CAN_HandleTypeDef hcan2;
|
||||
|
||||
SPI_HandleTypeDef hspi2;
|
||||
|
||||
TIM_HandleTypeDef htim1;
|
||||
TIM_HandleTypeDef htim4;
|
||||
TIM_HandleTypeDef htim8;
|
||||
|
||||
UART_HandleTypeDef huart1;
|
||||
UART_HandleTypeDef huart3;
|
||||
UART_HandleTypeDef huart6;
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
static void MX_GPIO_Init(void);
|
||||
static void MX_USART1_UART_Init(void);
|
||||
static void MX_ADC3_Init(void);
|
||||
static void MX_CAN1_Init(void);
|
||||
static void MX_CAN2_Init(void);
|
||||
static void MX_TIM1_Init(void);
|
||||
static void MX_TIM4_Init(void);
|
||||
static void MX_TIM8_Init(void);
|
||||
static void MX_USART3_UART_Init(void);
|
||||
static void MX_USART6_UART_Init(void);
|
||||
static void MX_SPI2_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
MX_USART1_UART_Init();
|
||||
MX_ADC3_Init();
|
||||
MX_CAN1_Init();
|
||||
MX_CAN2_Init();
|
||||
MX_TIM1_Init();
|
||||
MX_TIM4_Init();
|
||||
MX_TIM8_Init();
|
||||
MX_USART3_UART_Init();
|
||||
MX_USART6_UART_Init();
|
||||
MX_SPI2_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Configure the main internal regulator output voltage
|
||||
*/
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 6;
|
||||
RCC_OscInitStruct.PLL.PLLN = 168;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 4;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ADC3 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_ADC3_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN ADC3_Init 0 */
|
||||
|
||||
/* USER CODE END ADC3_Init 0 */
|
||||
|
||||
ADC_ChannelConfTypeDef sConfig = {0};
|
||||
|
||||
/* USER CODE BEGIN ADC3_Init 1 */
|
||||
|
||||
/* USER CODE END ADC3_Init 1 */
|
||||
|
||||
/** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||||
*/
|
||||
hadc3.Instance = ADC3;
|
||||
hadc3.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
||||
hadc3.Init.Resolution = ADC_RESOLUTION_12B;
|
||||
hadc3.Init.ScanConvMode = DISABLE;
|
||||
hadc3.Init.ContinuousConvMode = DISABLE;
|
||||
hadc3.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc3.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
||||
hadc3.Init.ExternalTrigConv = ADC_SOFTWARE_START;
|
||||
hadc3.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc3.Init.NbrOfConversion = 1;
|
||||
hadc3.Init.DMAContinuousRequests = DISABLE;
|
||||
hadc3.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||
if (HAL_ADC_Init(&hadc3) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
|
||||
*/
|
||||
sConfig.Channel = ADC_CHANNEL_8;
|
||||
sConfig.Rank = 1;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
if (HAL_ADC_ConfigChannel(&hadc3, &sConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN ADC3_Init 2 */
|
||||
|
||||
/* USER CODE END ADC3_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief CAN1 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_CAN1_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN CAN1_Init 0 */
|
||||
|
||||
/* USER CODE END CAN1_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN CAN1_Init 1 */
|
||||
|
||||
/* USER CODE END CAN1_Init 1 */
|
||||
hcan1.Instance = CAN1;
|
||||
hcan1.Init.Prescaler = 16;
|
||||
hcan1.Init.Mode = CAN_MODE_NORMAL;
|
||||
hcan1.Init.SyncJumpWidth = CAN_SJW_1TQ;
|
||||
hcan1.Init.TimeSeg1 = CAN_BS1_1TQ;
|
||||
hcan1.Init.TimeSeg2 = CAN_BS2_1TQ;
|
||||
hcan1.Init.TimeTriggeredMode = DISABLE;
|
||||
hcan1.Init.AutoBusOff = DISABLE;
|
||||
hcan1.Init.AutoWakeUp = DISABLE;
|
||||
hcan1.Init.AutoRetransmission = DISABLE;
|
||||
hcan1.Init.ReceiveFifoLocked = DISABLE;
|
||||
hcan1.Init.TransmitFifoPriority = DISABLE;
|
||||
if (HAL_CAN_Init(&hcan1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN CAN1_Init 2 */
|
||||
|
||||
/* USER CODE END CAN1_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief CAN2 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_CAN2_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN CAN2_Init 0 */
|
||||
|
||||
/* USER CODE END CAN2_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN CAN2_Init 1 */
|
||||
|
||||
/* USER CODE END CAN2_Init 1 */
|
||||
hcan2.Instance = CAN2;
|
||||
hcan2.Init.Prescaler = 16;
|
||||
hcan2.Init.Mode = CAN_MODE_NORMAL;
|
||||
hcan2.Init.SyncJumpWidth = CAN_SJW_1TQ;
|
||||
hcan2.Init.TimeSeg1 = CAN_BS1_1TQ;
|
||||
hcan2.Init.TimeSeg2 = CAN_BS2_1TQ;
|
||||
hcan2.Init.TimeTriggeredMode = DISABLE;
|
||||
hcan2.Init.AutoBusOff = DISABLE;
|
||||
hcan2.Init.AutoWakeUp = DISABLE;
|
||||
hcan2.Init.AutoRetransmission = DISABLE;
|
||||
hcan2.Init.ReceiveFifoLocked = DISABLE;
|
||||
hcan2.Init.TransmitFifoPriority = DISABLE;
|
||||
if (HAL_CAN_Init(&hcan2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN CAN2_Init 2 */
|
||||
|
||||
/* USER CODE END CAN2_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SPI2 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_SPI2_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN SPI2_Init 0 */
|
||||
|
||||
/* USER CODE END SPI2_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN SPI2_Init 1 */
|
||||
|
||||
/* USER CODE END SPI2_Init 1 */
|
||||
/* SPI2 parameter configuration*/
|
||||
hspi2.Instance = SPI2;
|
||||
hspi2.Init.Mode = SPI_MODE_MASTER;
|
||||
hspi2.Init.Direction = SPI_DIRECTION_2LINES;
|
||||
hspi2.Init.DataSize = SPI_DATASIZE_8BIT;
|
||||
hspi2.Init.CLKPolarity = SPI_POLARITY_LOW;
|
||||
hspi2.Init.CLKPhase = SPI_PHASE_1EDGE;
|
||||
hspi2.Init.NSS = SPI_NSS_SOFT;
|
||||
hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
|
||||
hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||||
hspi2.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||
hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||||
hspi2.Init.CRCPolynomial = 10;
|
||||
if (HAL_SPI_Init(&hspi2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN SPI2_Init 2 */
|
||||
|
||||
/* USER CODE END SPI2_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief TIM1 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_TIM1_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN TIM1_Init 0 */
|
||||
|
||||
/* USER CODE END TIM1_Init 0 */
|
||||
|
||||
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
|
||||
TIM_MasterConfigTypeDef sMasterConfig = {0};
|
||||
TIM_OC_InitTypeDef sConfigOC = {0};
|
||||
TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
|
||||
|
||||
/* USER CODE BEGIN TIM1_Init 1 */
|
||||
|
||||
/* USER CODE END TIM1_Init 1 */
|
||||
htim1.Instance = TIM1;
|
||||
htim1.Init.Prescaler = 0;
|
||||
htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim1.Init.Period = 65535;
|
||||
htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
htim1.Init.RepetitionCounter = 0;
|
||||
htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||
if (HAL_TIM_Base_Init(&htim1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
|
||||
if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_TIM_PWM_Init(&htim1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
||||
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||
if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
||||
sConfigOC.Pulse = 0;
|
||||
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||
sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
|
||||
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
||||
sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
|
||||
sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_DISABLE;
|
||||
sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_DISABLE;
|
||||
sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
|
||||
sBreakDeadTimeConfig.DeadTime = 0;
|
||||
sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
|
||||
sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
|
||||
sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
|
||||
if (HAL_TIMEx_ConfigBreakDeadTime(&htim1, &sBreakDeadTimeConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN TIM1_Init 2 */
|
||||
|
||||
/* USER CODE END TIM1_Init 2 */
|
||||
HAL_TIM_MspPostInit(&htim1);
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief TIM4 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_TIM4_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN TIM4_Init 0 */
|
||||
|
||||
/* USER CODE END TIM4_Init 0 */
|
||||
|
||||
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
|
||||
TIM_MasterConfigTypeDef sMasterConfig = {0};
|
||||
TIM_OC_InitTypeDef sConfigOC = {0};
|
||||
|
||||
/* USER CODE BEGIN TIM4_Init 1 */
|
||||
|
||||
/* USER CODE END TIM4_Init 1 */
|
||||
htim4.Instance = TIM4;
|
||||
htim4.Init.Prescaler = 0;
|
||||
htim4.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim4.Init.Period = 65535;
|
||||
htim4.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
htim4.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||
if (HAL_TIM_Base_Init(&htim4) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
|
||||
if (HAL_TIM_ConfigClockSource(&htim4, &sClockSourceConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_TIM_PWM_Init(&htim4) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
||||
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||
if (HAL_TIMEx_MasterConfigSynchronization(&htim4, &sMasterConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
||||
sConfigOC.Pulse = 0;
|
||||
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN TIM4_Init 2 */
|
||||
|
||||
/* USER CODE END TIM4_Init 2 */
|
||||
HAL_TIM_MspPostInit(&htim4);
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief TIM8 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_TIM8_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN TIM8_Init 0 */
|
||||
|
||||
/* USER CODE END TIM8_Init 0 */
|
||||
|
||||
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
|
||||
TIM_MasterConfigTypeDef sMasterConfig = {0};
|
||||
TIM_OC_InitTypeDef sConfigOC = {0};
|
||||
TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
|
||||
|
||||
/* USER CODE BEGIN TIM8_Init 1 */
|
||||
|
||||
/* USER CODE END TIM8_Init 1 */
|
||||
htim8.Instance = TIM8;
|
||||
htim8.Init.Prescaler = 0;
|
||||
htim8.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim8.Init.Period = 65535;
|
||||
htim8.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
htim8.Init.RepetitionCounter = 0;
|
||||
htim8.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||
if (HAL_TIM_Base_Init(&htim8) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
|
||||
if (HAL_TIM_ConfigClockSource(&htim8, &sClockSourceConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_TIM_PWM_Init(&htim8) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
||||
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||
if (HAL_TIMEx_MasterConfigSynchronization(&htim8, &sMasterConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
||||
sConfigOC.Pulse = 0;
|
||||
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||
sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
|
||||
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
||||
sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
|
||||
sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim8, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim8, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim8, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_DISABLE;
|
||||
sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_DISABLE;
|
||||
sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
|
||||
sBreakDeadTimeConfig.DeadTime = 0;
|
||||
sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
|
||||
sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
|
||||
sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
|
||||
if (HAL_TIMEx_ConfigBreakDeadTime(&htim8, &sBreakDeadTimeConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN TIM8_Init 2 */
|
||||
|
||||
/* USER CODE END TIM8_Init 2 */
|
||||
HAL_TIM_MspPostInit(&htim8);
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USART1 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_USART1_UART_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN USART1_Init 0 */
|
||||
|
||||
/* USER CODE END USART1_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN USART1_Init 1 */
|
||||
|
||||
/* USER CODE END USART1_Init 1 */
|
||||
huart1.Instance = USART1;
|
||||
huart1.Init.BaudRate = 115200;
|
||||
huart1.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart1.Init.StopBits = UART_STOPBITS_1;
|
||||
huart1.Init.Parity = UART_PARITY_NONE;
|
||||
huart1.Init.Mode = UART_MODE_TX_RX;
|
||||
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
if (HAL_UART_Init(&huart1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN USART1_Init 2 */
|
||||
|
||||
/* USER CODE END USART1_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USART3 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_USART3_UART_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN USART3_Init 0 */
|
||||
|
||||
/* USER CODE END USART3_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN USART3_Init 1 */
|
||||
|
||||
/* USER CODE END USART3_Init 1 */
|
||||
huart3.Instance = USART3;
|
||||
huart3.Init.BaudRate = 115200;
|
||||
huart3.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart3.Init.StopBits = UART_STOPBITS_1;
|
||||
huart3.Init.Parity = UART_PARITY_NONE;
|
||||
huart3.Init.Mode = UART_MODE_TX_RX;
|
||||
huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart3.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
if (HAL_UART_Init(&huart3) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN USART3_Init 2 */
|
||||
|
||||
/* USER CODE END USART3_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USART6 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_USART6_UART_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN USART6_Init 0 */
|
||||
|
||||
/* USER CODE END USART6_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN USART6_Init 1 */
|
||||
|
||||
/* USER CODE END USART6_Init 1 */
|
||||
huart6.Instance = USART6;
|
||||
huart6.Init.BaudRate = 115200;
|
||||
huart6.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart6.Init.StopBits = UART_STOPBITS_1;
|
||||
huart6.Init.Parity = UART_PARITY_NONE;
|
||||
huart6.Init.Mode = UART_MODE_TX_RX;
|
||||
huart6.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart6.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
if (HAL_UART_Init(&huart6) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN USART6_Init 2 */
|
||||
|
||||
/* USER CODE END USART6_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief GPIO Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_GPIO_Init(void)
|
||||
{
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOI_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOH_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOF_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
|
@ -88,7 +88,18 @@ void HAL_MspInit(void)
|
|||
void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(hadc->Instance==ADC3)
|
||||
if(hadc->Instance==ADC1)
|
||||
{
|
||||
/* USER CODE BEGIN ADC1_MspInit 0 */
|
||||
|
||||
/* USER CODE END ADC1_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_ADC1_CLK_ENABLE();
|
||||
/* USER CODE BEGIN ADC1_MspInit 1 */
|
||||
|
||||
/* USER CODE END ADC1_MspInit 1 */
|
||||
}
|
||||
else if(hadc->Instance==ADC3)
|
||||
{
|
||||
/* USER CODE BEGIN ADC3_MspInit 0 */
|
||||
|
||||
|
|
@ -120,7 +131,18 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
|
|||
*/
|
||||
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
|
||||
{
|
||||
if(hadc->Instance==ADC3)
|
||||
if(hadc->Instance==ADC1)
|
||||
{
|
||||
/* USER CODE BEGIN ADC1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END ADC1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ADC1_CLK_DISABLE();
|
||||
/* USER CODE BEGIN ADC1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END ADC1_MspDeInit 1 */
|
||||
}
|
||||
else if(hadc->Instance==ADC3)
|
||||
{
|
||||
/* USER CODE BEGIN ADC3_MspDeInit 0 */
|
||||
|
||||
|
|
@ -264,68 +286,68 @@ void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
|
|||
}
|
||||
|
||||
/**
|
||||
* @brief SPI MSP Initialization
|
||||
* @brief I2C MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param hspi: SPI handle pointer
|
||||
* @param hi2c: I2C handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
|
||||
void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(hspi->Instance==SPI2)
|
||||
if(hi2c->Instance==I2C2)
|
||||
{
|
||||
/* USER CODE BEGIN SPI2_MspInit 0 */
|
||||
/* USER CODE BEGIN I2C2_MspInit 0 */
|
||||
|
||||
/* USER CODE END SPI2_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_SPI2_CLK_ENABLE();
|
||||
/* USER CODE END I2C2_MspInit 0 */
|
||||
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/**SPI2 GPIO Configuration
|
||||
PB13 ------> SPI2_SCK
|
||||
PB14 ------> SPI2_MISO
|
||||
PB15 ------> SPI2_MOSI
|
||||
__HAL_RCC_GPIOF_CLK_ENABLE();
|
||||
/**I2C2 GPIO Configuration
|
||||
PF0 ------> I2C2_SDA
|
||||
PF1 ------> I2C2_SCL
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
GPIO_InitStruct.Alternate = GPIO_AF4_I2C2;
|
||||
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN SPI2_MspInit 1 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_I2C2_CLK_ENABLE();
|
||||
/* USER CODE BEGIN I2C2_MspInit 1 */
|
||||
|
||||
/* USER CODE END SPI2_MspInit 1 */
|
||||
/* USER CODE END I2C2_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SPI MSP De-Initialization
|
||||
* @brief I2C MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param hspi: SPI handle pointer
|
||||
* @param hi2c: I2C handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
|
||||
void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
|
||||
{
|
||||
if(hspi->Instance==SPI2)
|
||||
if(hi2c->Instance==I2C2)
|
||||
{
|
||||
/* USER CODE BEGIN SPI2_MspDeInit 0 */
|
||||
/* USER CODE BEGIN I2C2_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END SPI2_MspDeInit 0 */
|
||||
/* USER CODE END I2C2_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_SPI2_CLK_DISABLE();
|
||||
__HAL_RCC_I2C2_CLK_DISABLE();
|
||||
|
||||
/**SPI2 GPIO Configuration
|
||||
PB13 ------> SPI2_SCK
|
||||
PB14 ------> SPI2_MISO
|
||||
PB15 ------> SPI2_MOSI
|
||||
/**I2C2 GPIO Configuration
|
||||
PF0 ------> I2C2_SDA
|
||||
PF1 ------> I2C2_SCL
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
|
||||
HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0);
|
||||
|
||||
/* USER CODE BEGIN SPI2_MspDeInit 1 */
|
||||
HAL_GPIO_DeInit(GPIOF, GPIO_PIN_1);
|
||||
|
||||
/* USER CODE END SPI2_MspDeInit 1 */
|
||||
/* USER CODE BEGIN I2C2_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END I2C2_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,747 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f4xx.c
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
|
||||
*
|
||||
* This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32f4xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
*
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f4xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
#include "stm32f4xx.h"
|
||||
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/************************* Miscellaneous Configuration ************************/
|
||||
/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
|
||||
|| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
|
||||
/* #define DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
|
||||
STM32F412Zx || STM32F412Vx */
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* #define DATA_IN_ExtSDRAM */
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
|
||||
STM32F479xx */
|
||||
|
||||
/* Note: Following vector table addresses must be defined in line with linker
|
||||
configuration. */
|
||||
/*!< Uncomment the following line if you need to relocate the vector table
|
||||
anywhere in Flash or Sram, else the vector table is kept at the automatic
|
||||
remap of boot address selected */
|
||||
/* #define USER_VECT_TAB_ADDRESS */
|
||||
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table
|
||||
in Sram else user remap will be done in Flash. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#if defined(VECT_TAB_SRAM)
|
||||
#define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#else
|
||||
#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#endif /* VECT_TAB_SRAM */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
/* This variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
uint32_t SystemCoreClock = 16000000;
|
||||
const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
static void SystemInit_ExtMemCtl(void);
|
||||
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system
|
||||
* Initialize the FPU setting, vector table location and External memory
|
||||
* configuration.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit(void)
|
||||
{
|
||||
/* FPU settings ------------------------------------------------------------*/
|
||||
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
|
||||
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
|
||||
#endif
|
||||
|
||||
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
SystemInit_ExtMemCtl();
|
||||
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
|
||||
|
||||
/* Configure the Vector Table location -------------------------------------*/
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||
* be used by the user application to setup the SysTick timer or configure
|
||||
* other parameters.
|
||||
*
|
||||
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||
* based on this variable will be incorrect.
|
||||
*
|
||||
* @note - The system frequency computed by this function is not the real
|
||||
* frequency in the chip. It is calculated based on the predefined
|
||||
* constant and the selected clock source:
|
||||
*
|
||||
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
||||
*
|
||||
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
*
|
||||
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
|
||||
*
|
||||
* (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
|
||||
* 16 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
|
||||
* depends on the application requirements), user has to ensure that HSE_VALUE
|
||||
* is same as the real frequency of the crystal used. Otherwise, this function
|
||||
* may have wrong result.
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
*
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemCoreClockUpdate(void)
|
||||
{
|
||||
uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
|
||||
|
||||
/* Get SYSCLK source -------------------------------------------------------*/
|
||||
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
||||
|
||||
switch (tmp)
|
||||
{
|
||||
case 0x00: /* HSI used as system clock source */
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
case 0x04: /* HSE used as system clock source */
|
||||
SystemCoreClock = HSE_VALUE;
|
||||
break;
|
||||
case 0x08: /* PLL used as system clock source */
|
||||
|
||||
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
|
||||
SYSCLK = PLL_VCO / PLL_P
|
||||
*/
|
||||
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
|
||||
pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
|
||||
|
||||
if (pllsource != 0)
|
||||
{
|
||||
/* HSE used as PLL clock source */
|
||||
pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* HSI used as PLL clock source */
|
||||
pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
||||
}
|
||||
|
||||
pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
|
||||
SystemCoreClock = pllvco/pllp;
|
||||
break;
|
||||
default:
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
}
|
||||
/* Compute HCLK frequency --------------------------------------------------*/
|
||||
/* Get HCLK prescaler */
|
||||
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
|
||||
/* HCLK frequency */
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f4xx.s before jump to main.
|
||||
* This function configures the external memories (SRAM/SDRAM)
|
||||
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
__IO uint32_t tmp = 0x00;
|
||||
|
||||
register uint32_t tmpreg = 0, timeout = 0xFFFF;
|
||||
register __IO uint32_t index;
|
||||
|
||||
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
|
||||
RCC->AHB1ENR |= 0x000001F8;
|
||||
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
|
||||
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x00CCC0CC;
|
||||
GPIOD->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xAAAA0A8A;
|
||||
/* Configure PDx pins speed to 100 MHz */
|
||||
GPIOD->OSPEEDR = 0xFFFF0FCF;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00CC0CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA828A;
|
||||
/* Configure PEx pins speed to 100 MHz */
|
||||
GPIOE->OSPEEDR = 0xFFFFC3CF;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA800AAA;
|
||||
/* Configure PFx pins speed to 50 MHz */
|
||||
GPIOF->OSPEEDR = 0xAA800AAA;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOG->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0xAAAAAAAA;
|
||||
/* Configure PGx pins speed to 50 MHz */
|
||||
GPIOG->OSPEEDR = 0xAAAAAAAA;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PHx pins to FMC Alternate function */
|
||||
GPIOH->AFR[0] = 0x00C0CC00;
|
||||
GPIOH->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PHx pins in Alternate function mode */
|
||||
GPIOH->MODER = 0xAAAA08A0;
|
||||
/* Configure PHx pins speed to 50 MHz */
|
||||
GPIOH->OSPEEDR = 0xAAAA08A0;
|
||||
/* Configure PHx pins Output type to push-pull */
|
||||
GPIOH->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PHx pins */
|
||||
GPIOH->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PIx pins to FMC Alternate function */
|
||||
GPIOI->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOI->AFR[1] = 0x00000CC0;
|
||||
/* Configure PIx pins in Alternate function mode */
|
||||
GPIOI->MODER = 0x0028AAAA;
|
||||
/* Configure PIx pins speed to 50 MHz */
|
||||
GPIOI->OSPEEDR = 0x0028AAAA;
|
||||
/* Configure PIx pins Output type to push-pull */
|
||||
GPIOI->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PIx pins */
|
||||
GPIOI->PUPDR = 0x00000000;
|
||||
|
||||
/*-- FMC Configuration -------------------------------------------------------*/
|
||||
/* Enable the FMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
|
||||
FMC_Bank5_6->SDCR[0] = 0x000019E4;
|
||||
FMC_Bank5_6->SDTR[0] = 0x01115351;
|
||||
|
||||
/* SDRAM initialization sequence */
|
||||
/* Clock enable command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000011;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Delay */
|
||||
for (index = 0; index<1000; index++);
|
||||
|
||||
/* PALL command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000012;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Auto refresh command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000073;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* MRD register program */
|
||||
FMC_Bank5_6->SDCMR = 0x00046014;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Set refresh count */
|
||||
tmpreg = FMC_Bank5_6->SDRTR;
|
||||
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
|
||||
|
||||
/* Disable write protection */
|
||||
tmpreg = FMC_Bank5_6->SDCR[0];
|
||||
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
||||
#if defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001091;
|
||||
FMC_Bank1->BTCR[3] = 0x00110212;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F469xx || STM32F479xx */
|
||||
|
||||
(void)(tmp);
|
||||
}
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
||||
#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f4xx.s before jump to main.
|
||||
* This function configures the external memories (SRAM/SDRAM)
|
||||
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
__IO uint32_t tmp = 0x00;
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
#if defined (DATA_IN_ExtSDRAM)
|
||||
register uint32_t tmpreg = 0, timeout = 0xFFFF;
|
||||
register __IO uint32_t index;
|
||||
|
||||
#if defined(STM32F446xx)
|
||||
/* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
|
||||
clock */
|
||||
RCC->AHB1ENR |= 0x0000007D;
|
||||
#else
|
||||
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
|
||||
clock */
|
||||
RCC->AHB1ENR |= 0x000001F8;
|
||||
#endif /* STM32F446xx */
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
|
||||
|
||||
#if defined(STM32F446xx)
|
||||
/* Connect PAx pins to FMC Alternate function */
|
||||
GPIOA->AFR[0] |= 0xC0000000;
|
||||
GPIOA->AFR[1] |= 0x00000000;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOA->MODER |= 0x00008000;
|
||||
/* Configure PDx pins speed to 50 MHz */
|
||||
GPIOA->OSPEEDR |= 0x00008000;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOA->OTYPER |= 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOA->PUPDR |= 0x00000000;
|
||||
|
||||
/* Connect PCx pins to FMC Alternate function */
|
||||
GPIOC->AFR[0] |= 0x00CC0000;
|
||||
GPIOC->AFR[1] |= 0x00000000;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOC->MODER |= 0x00000A00;
|
||||
/* Configure PDx pins speed to 50 MHz */
|
||||
GPIOC->OSPEEDR |= 0x00000A00;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOC->OTYPER |= 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOC->PUPDR |= 0x00000000;
|
||||
#endif /* STM32F446xx */
|
||||
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x000000CC;
|
||||
GPIOD->AFR[1] = 0xCC000CCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xA02A000A;
|
||||
/* Configure PDx pins speed to 50 MHz */
|
||||
GPIOD->OSPEEDR = 0xA02A000A;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00000CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA800A;
|
||||
/* Configure PEx pins speed to 50 MHz */
|
||||
GPIOE->OSPEEDR = 0xAAAA800A;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA800AAA;
|
||||
/* Configure PFx pins speed to 50 MHz */
|
||||
GPIOF->OSPEEDR = 0xAA800AAA;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOG->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0xAAAAAAAA;
|
||||
/* Configure PGx pins speed to 50 MHz */
|
||||
GPIOG->OSPEEDR = 0xAAAAAAAA;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* Connect PHx pins to FMC Alternate function */
|
||||
GPIOH->AFR[0] = 0x00C0CC00;
|
||||
GPIOH->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PHx pins in Alternate function mode */
|
||||
GPIOH->MODER = 0xAAAA08A0;
|
||||
/* Configure PHx pins speed to 50 MHz */
|
||||
GPIOH->OSPEEDR = 0xAAAA08A0;
|
||||
/* Configure PHx pins Output type to push-pull */
|
||||
GPIOH->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PHx pins */
|
||||
GPIOH->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PIx pins to FMC Alternate function */
|
||||
GPIOI->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOI->AFR[1] = 0x00000CC0;
|
||||
/* Configure PIx pins in Alternate function mode */
|
||||
GPIOI->MODER = 0x0028AAAA;
|
||||
/* Configure PIx pins speed to 50 MHz */
|
||||
GPIOI->OSPEEDR = 0x0028AAAA;
|
||||
/* Configure PIx pins Output type to push-pull */
|
||||
GPIOI->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PIx pins */
|
||||
GPIOI->PUPDR = 0x00000000;
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
/*-- FMC Configuration -------------------------------------------------------*/
|
||||
/* Enable the FMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
|
||||
/* Configure and enable SDRAM bank1 */
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDCR[0] = 0x00001954;
|
||||
#else
|
||||
FMC_Bank5_6->SDCR[0] = 0x000019E4;
|
||||
#endif /* STM32F446xx */
|
||||
FMC_Bank5_6->SDTR[0] = 0x01115351;
|
||||
|
||||
/* SDRAM initialization sequence */
|
||||
/* Clock enable command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000011;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Delay */
|
||||
for (index = 0; index<1000; index++);
|
||||
|
||||
/* PALL command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000012;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Auto refresh command */
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDCMR = 0x000000F3;
|
||||
#else
|
||||
FMC_Bank5_6->SDCMR = 0x00000073;
|
||||
#endif /* STM32F446xx */
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* MRD register program */
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDCMR = 0x00044014;
|
||||
#else
|
||||
FMC_Bank5_6->SDCMR = 0x00046014;
|
||||
#endif /* STM32F446xx */
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Set refresh count */
|
||||
tmpreg = FMC_Bank5_6->SDRTR;
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
|
||||
#else
|
||||
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
|
||||
#endif /* STM32F446xx */
|
||||
|
||||
/* Disable write protection */
|
||||
tmpreg = FMC_Bank5_6->SDCR[0];
|
||||
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
|
||||
#endif /* DATA_IN_ExtSDRAM */
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
|
||||
|| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
|
||||
|
||||
#if defined(DATA_IN_ExtSRAM)
|
||||
/*-- GPIOs Configuration -----------------------------------------------------*/
|
||||
/* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
|
||||
RCC->AHB1ENR |= 0x00000078;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
|
||||
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x00CCC0CC;
|
||||
GPIOD->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xAAAA0A8A;
|
||||
/* Configure PDx pins speed to 100 MHz */
|
||||
GPIOD->OSPEEDR = 0xFFFF0FCF;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00CC0CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA828A;
|
||||
/* Configure PEx pins speed to 100 MHz */
|
||||
GPIOE->OSPEEDR = 0xFFFFC3CF;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0x00CCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCC0000;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA000AAA;
|
||||
/* Configure PFx pins speed to 100 MHz */
|
||||
GPIOF->OSPEEDR = 0xFF000FFF;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0x00CCCCCC;
|
||||
GPIOG->AFR[1] = 0x000000C0;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0x00085AAA;
|
||||
/* Configure PGx pins speed to 100 MHz */
|
||||
GPIOG->OSPEEDR = 0x000CAFFF;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
/*-- FMC/FSMC Configuration --------------------------------------------------*/
|
||||
/* Enable the FMC/FSMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
||||
#if defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001091;
|
||||
FMC_Bank1->BTCR[3] = 0x00110212;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F469xx || STM32F479xx */
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
|
||||
|| defined(STM32F412Zx) || defined(STM32F412Vx)
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FSMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FSMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
|
||||
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
|
||||
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
|
||||
STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx */
|
||||
(void)(tmp);
|
||||
}
|
||||
#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
|
@ -9,6 +9,29 @@ config SOC_STM32F407IG
|
|||
|
||||
menu "Onboard Peripheral Drivers"
|
||||
|
||||
config BSP_USING_ARDUINO
|
||||
bool "Compatible with Arduino Ecosystem (RTduino)"
|
||||
select PKG_USING_RTDUINO
|
||||
select BSP_USING_STLINK_TO_USART
|
||||
select BSP_USING_GPIO
|
||||
select BSP_USING_ADC
|
||||
select BSP_USING_ADC1
|
||||
select BSP_USING_PWM
|
||||
select BSP_USING_PWM1
|
||||
select BSP_USING_PWM1_CH1
|
||||
select BSP_USING_PWM1_CH2
|
||||
select BSP_USING_PWM1_CH3
|
||||
select BSP_USING_PWM1_CH4
|
||||
select BSP_USING_PWM8
|
||||
select BSP_USING_PWM8_CH1
|
||||
select BSP_USING_PWM8_CH2
|
||||
select BSP_USING_PWM8_CH3
|
||||
select BSP_USING_I2C
|
||||
select BSP_USING_I2C1
|
||||
imply RTDUINO_USING_SERVO
|
||||
imply RTDUINO_USING_WIRE
|
||||
default n
|
||||
|
||||
endmenu
|
||||
|
||||
menu "On-chip Peripheral Drivers"
|
||||
|
|
@ -118,6 +141,9 @@ menu "On-chip Peripheral Drivers"
|
|||
default n
|
||||
select RT_USING_ADC
|
||||
if BSP_USING_ADC
|
||||
config BSP_USING_ADC1
|
||||
bool "Enable ADC1"
|
||||
default n
|
||||
config BSP_USING_ADC3
|
||||
bool "Enable ADC3"
|
||||
default n
|
||||
|
|
@ -151,6 +177,7 @@ menu "On-chip Peripheral Drivers"
|
|||
select RT_USING_I2C_BITOPS
|
||||
select RT_USING_PIN
|
||||
if BSP_USING_I2C1
|
||||
comment "Notice: PF0 --> 80; PF1 --> 81"
|
||||
config BSP_I2C1_SCL_PIN
|
||||
int "i2c1 scl pin number"
|
||||
default 81
|
||||
|
|
|
|||
Loading…
Reference in New Issue