update lpc2148

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1583 bbd45198-f89e-11dd-88c7-29a3b14d5316

bsp/lpc2148/SConstruct

@@ -6,7 +6,7 @@ RTT_ROOT = os.path.normpath(os.getcwd() + '/../..')
 sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
 from building import *
 
-TARGET = 'rtthread-lpc2148.' + rtconfig.TARGET_EXT
+TARGET = 'obj/rtthread-lpc2148.' + rtconfig.TARGET_EXT
 
 env = Environment(tools = ['mingw'],
 	AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,

bsp/lpc2148/application.c

@@ -75,34 +75,55 @@ void rt_init_thread_entry(void *parameter)
 #define LED2     (1<<17) //P1
 #define LED3     (1<<18) //P1
 #define LED4     (1<<19) //P1
-ALIGN(4)
+
-char thread_led1_stack[512];
+ALIGN(4) char thread_led1_stack[512];
 struct rt_thread thread_led1;
 void thread_led1_entry(void* parameter)
 {
-    volatile unsigned int i;
+    unsigned int count=0;
+
     IO1DIR |= LED1;
     while(1)
     {
+        /* led1 on */
         IO1CLR = LED1;
+#ifndef RT_USING_FINSH
+        rt_kprintf("led1 on, count : %d\r\n",count);
+#endif
+        count++;
         rt_thread_delay( RT_TICK_PER_SECOND/3 ); /* delay 0.3s */
+
+        /* led1 off */
         IO1SET = LED1;
+#ifndef RT_USING_FINSH
+        rt_kprintf("led1 off\r\n");
+#endif
         rt_thread_delay( RT_TICK_PER_SECOND/3 );
     }
 }
 
-ALIGN(4)
+ALIGN(4) char thread_led2_stack[512];
-char thread_led2_stack[512];
 struct rt_thread thread_led2;
 void thread_led2_entry(void* parameter)
 {
-    volatile unsigned int i;
+    unsigned int count=0;
+
     IO1DIR |= LED2;
     while(1)
     {
+        /* led2 on */
         IO1CLR = LED2;
+#ifndef RT_USING_FINSH
+        rt_kprintf("led2 on, count : %d\r\n",count);
+#endif
+        count++;
         rt_thread_delay( RT_TICK_PER_SECOND/2 ); /* delay 0.5s */
+
+        /* led2 off */
         IO1SET = LED2;
+#ifndef RT_USING_FINSH
+        rt_kprintf("led1 off\r\n");
+#endif
         rt_thread_delay( RT_TICK_PER_SECOND/2 );
     }
 }

bsp/lpc2148/lpc2148_rom.ld

@@ -0,0 +1,143 @@
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+
+OUTPUT_ARCH(arm)
+
+MEMORY
+{
+	CODE (rx) : ORIGIN = 0x00000000, LENGTH = 512k /* 512KB flash */
+	DATA (rw) : ORIGIN = 0x40000000, LENGTH =  32k /* 32K sram */
+}
+
+ENTRY(_start)
+
+_undefined_tack_size = 0x40;
+_abort_tack_size = 0x40;
+_fiq_tack_size = 0x100;
+_irq_tack_size = 0x200;
+_svc_tack_size = 0x400;
+
+SECTIONS
+{
+	. = 0;
+
+	. = ALIGN(4);
+	.text :	
+	{
+		*(.init)
+		*(.text)
+		*(.rodata)
+		*(.rodata*)
+		*(.glue_7)
+		*(.glue_7t)
+
+		/* section information for finsh shell */
+		. = ALIGN(4);
+		__fsymtab_start = .;
+		KEEP(*(FSymTab))
+		__fsymtab_end = .;
+		. = ALIGN(4);
+		__vsymtab_start = .;
+		KEEP(*(VSymTab))
+		__vsymtab_end = .;
+		. = ALIGN(4);
+
+	} >CODE
+
+	. = ALIGN(4);
+	.ctors :
+	{
+		PROVIDE(__ctors_start__ = .);
+		KEEP(*(SORT(.ctors.*)))
+		KEEP(*(.ctors))
+		PROVIDE(__ctors_end__ = .);
+	} > CODE
+
+	.dtors :
+	{
+		PROVIDE(__dtors_start__ = .);
+		KEEP(*(SORT(.dtors.*)))
+		KEEP(*(.dtors))
+		PROVIDE(__dtors_end__ = .);
+	} > CODE
+
+	__end_of_text__ = .;
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+
+        /* This is used by the startup in order to initialize the .data secion */
+        _sidata = .;
+    } > CODE
+    __exidx_end = .;
+
+	/* .data section which is used for initialized data */
+    .data : AT (_sidata)
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _sdata = . ;
+
+        *(.data)
+        *(.data.*)
+        *(.gnu.linkonce.d*)
+
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _edata = . ;
+    } >DATA
+	__data_end = .;
+
+	.noinit :
+	{
+	    *(.bss.noinit)
+	} > DATA
+
+	.stack : 
+	{
+		. = ALIGN(4);
+	    _undefined_stack_base = .;
+	    . = . + _undefined_tack_size;
+	    _undefined_stack_top = .;
+		
+	    _abort_stack_base = .;
+	    . = . + _abort_tack_size;
+	    _abort_stack_top = .;
+		
+	    _fiq_stack_base = .;
+	    . = . + _fiq_tack_size;
+	    _fiq_stack_top = .;
+		
+	    _irq_stack_base = .;
+	    . = . + _irq_tack_size;
+	    _irq_stack_top = .;
+		
+	    _svc_stack_base = .;
+	    . = . + _svc_tack_size;
+	    _svc_stack_top = .;
+	} >DATA
+
+    __bss_start = .;
+    .bss :
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _sbss = .;
+
+        *(.bss)
+        *(COMMON)
+
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _ebss = . ;
+        _estack = .;
+    } > DATA
+    __bss_end = .;
+
+	/* Align here to ensure that the .bss section occupies space up to
+	_end.  Align after .bss to ensure correct alignment even if the
+	.bss section disappears because there are no input sections.  */
+	. = ALIGN(32 / 8);
+}

bsp/lpc2148/project.Opt

@@ -13,11 +13,11 @@
 Target (rtthread-lpc2148), 0x0004 // Tools: 'ARM-ADS'
 GRPOPT 1,(Startup),0,0,0
 GRPOPT 2,(Kernel),0,0,0
-GRPOPT 3,(LPC214X),1,0,0
+GRPOPT 3,(LPC214X),0,0,0
 GRPOPT 4,(finsh),0,0,0
 
 OPTFFF 1,1,1,0,0,0,0,0,<.\application.c><application.c> 
-OPTFFF 1,2,1,2,0,130,133,0,<.\startup.c><startup.c> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,0,0,0,0,0,0,0,0,117,3,0,0,254,0,0,0 }
+OPTFFF 1,2,1,1073741826,0,124,124,0,<.\startup.c><startup.c> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,0,0,0,0,0,0,0,0,117,3,0,0,254,0,0,0 }
 OPTFFF 1,3,1,0,0,0,0,0,<.\board.c><board.c> 
 OPTFFF 2,4,1,0,0,0,0,0,<..\..\src\clock.c><clock.c> 
 OPTFFF 2,5,1,0,0,0,0,0,<..\..\src\device.c><device.c> 
@@ -36,7 +36,7 @@ OPTFFF 2,17,1,0,0,0,0,0,<..\..\src\thread.c><thread.c>
 OPTFFF 2,18,1,0,0,0,0,0,<..\..\src\timer.c><timer.c> 
 OPTFFF 3,19,1,0,0,0,0,0,<..\..\libcpu\arm\lpc214x\cpuport.c><cpuport.c> 
 OPTFFF 3,20,1,0,0,0,0,0,<..\..\libcpu\arm\lpc214x\serial.c><serial.c> 
-OPTFFF 3,21,2,0,0,0,0,0,<..\..\libcpu\arm\lpc214x\context_rvds.S><context_rvds.S> 
+OPTFFF 3,21,2,100663296,0,0,0,0,<..\..\libcpu\arm\lpc214x\context_rvds.S><context_rvds.S> 
 OPTFFF 3,22,2,0,0,0,0,0,<..\..\libcpu\arm\lpc214x\start_rvds.S><start_rvds.S> 
 OPTFFF 3,23,1,0,0,0,0,0,<..\..\libcpu\arm\common\backtrace.c><backtrace.c> 
 OPTFFF 3,24,1,0,0,0,0,0,<..\..\libcpu\arm\common\div0.c><div0.c> 
@@ -58,19 +58,20 @@ OPTFFF 4,38,1,0,0,0,0,0,<..\..\components\finsh\symbol.c><symbol.c>
 
 TARGOPT 1, (rtthread-lpc2148)
  ADSCLK=12000000
-  OPTTT 0,1,1,0
+  OPTTT 1,1,1,0
   OPTHX 1,65535,0,0,0
   OPTLX 79,66,8,<.\obj\>
   OPTOX 16
   OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
   OPTXL 1,1,1,1,1,1,1,0,0
-  OPTFL 0,0,1
+  OPTFL 1,0,1
   OPTAX 0
   OPTDL (SARM.DLL)(-cLPC2100)(DARMP.DLL)(-pLPC2148)(SARM.DLL)()(TARMP.DLL)(-pLPC2148)
-  OPTDBG 48125,0,()()()()()()()()()() (BIN\UL2ARM.DLL)()()()
+  OPTDBG 48126,0,()()()()()()()()()() (BIN\UL2ARM.DLL)()()()
+  OPTKEY 0,(UL2ARM)(-UV0168AVR -O14 -S1 -C0 -N00("ARM7TDMI-S Core") -D00(4F1F0F0F) -L00(4) -FO19 -FD40000000 -FC800 -FN1 -FF0LPC_IAP2_512 -FS00 -FL07D000)
   OPTKEY 0,(DLGDARM)((134=-1,-1,-1,-1,0)(135=-1,-1,-1,-1,0)(153=-1,-1,-1,-1,0)(154=-1,-1,-1,-1,0)(108=-1,-1,-1,-1,0)(106=-1,-1,-1,-1,0)(105=-1,-1,-1,-1,0)(145=-1,-1,-1,-1,0)(147=-1,-1,-1,-1,0)(80=-1,-1,-1,-1,0)(104=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(101=-1,-1,-1,-1,0)(160=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(113=-1,-1,-1,-1,0)(112=-1,-1,-1,-1,0)(137=-1,-1,-1,-1,0)(138=-1,-1,-1,-1,0)(117=-1,-1,-1,-1,0)(146=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(114=-1,-1,-1,-1,0)(141=-1,-1,-1,-1,0)(142=-1,-1,-1,-1,0)(143=-1,-1,-1,-1,0)(144=-1,-1,-1,-1,0)(115=-1,-1,-1,-1,0)(116=-1,-1,-1,-1,0))
   OPTKEY 0,(ARMDBGFLAGS)(-T5F)
-  OPTDF 0x90
+  OPTDF 0x94
   OPTLE <>
   OPTLC <>
 EndOpt

bsp/lpc2148/project.Uv2

@@ -127,13 +127,13 @@ Options 1,0,0  // Target 'rtthread-lpc2148'
  ADSLDSC ()
  ADSLDIB ()
  ADSLDIC ()
- ADSLDMC ( --keep __fsym_* --keep __vsym_*)
+ ADSLDMC ( --keep __fsym_* --keep __vsym_* )
  ADSLDIF ()
  ADSLDDW ()
   OPTDL (SARM.DLL)(-cLPC2100)(DARMP.DLL)(-pLPC2148)(SARM.DLL)()(TARMP.DLL)(-pLPC2148)
-  OPTDBG 48125,0,()()()()()()()()()() (BIN\UL2ARM.DLL)()()()
+  OPTDBG 48126,0,()()()()()()()()()() (BIN\UL2ARM.DLL)()()()
- FLASH1 { 1,0,0,0,0,0,0,0,255,255,255,255,0,0,0,0,0,0,0,0 }
+ FLASH1 { 9,0,0,0,1,0,0,0,0,16,0,0,0,0,0,0,0,0,0,0 }
- FLASH2 ()
+ FLASH2 (BIN\UL2ARM.DLL)
  FLASH3 ("LPC210x_ISP.EXE" ("#H" ^X $D COM1: 38400 1))
  FLASH4 ()
 EndOpt

bsp/lpc2148/rtconfig.py

@@ -25,7 +25,7 @@ if PLATFORM == 'gcc':
     OBJDUMP = PREFIX + 'objdump'
     OBJCPY = PREFIX + 'objcopy'
 
-    DEVICE = ' -mcpu=arm7tdmi-s -mthumb'
+    DEVICE = ' -mcpu=arm7tdmi-s'
     CFLAGS = DEVICE + ' -DRT_USING_MINILIBC'
     AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp'
     LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rtthread-lpc2148.map,-cref,-u,_start -T lpc2148_rom.ld'

bsp/lpc2148/startup.c

@@ -86,11 +86,6 @@ void rtthread_startup(void)
     /* init scheduler system */
     rt_system_scheduler_init();
 
-#ifdef RT_USING_HOOK /* if the hook is used */
-    /* set idle thread hook */
-    rt_thread_idle_sethook(0);
-#endif
-
 #ifdef RT_USING_DEVICE
 #ifdef RT_USING_DFS
     /* init sd card */