libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity

[bsp/stm32] upgrade to rt-thread 5.0

This commit is contained in:
NU-LL 2022-10-16 20:42:31 +08:00 committed by guo
parent 40aaf3e7f3
commit b380bdf071
26 changed files with 1032 additions and 2652 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
bsp/stm32/libraries/HAL_Drivers/drv_flash/drv_flash_h7.c
View File

@ -158,27 +158,35 @@ int stm32_flash_erase(rt_uint32_t addr, size_t size)
rt_uint32_t addr_bank1 = 0;
rt_uint32_t size_bank1 = 0;
#ifdef FLASH_BANK_2
rt_uint32_t addr_bank2 = 0;
rt_uint32_t size_bank2 = 0;
#endif
if((addr + size) < FLASH_BANK2_BASE)
{
addr_bank1 = addr;
size_bank1 = size;
#ifdef FLASH_BANK_2
size_bank2 = 0;
#endif
}
else if(addr >= FLASH_BANK2_BASE)
{
size_bank1 = 0;
#ifdef FLASH_BANK_2
addr_bank2 = addr;
size_bank2 = size;
#endif
}
else
{
addr_bank1 = addr;
size_bank1 = FLASH_BANK2_BASE - addr_bank1;
#ifdef FLASH_BANK_2
addr_bank2 = FLASH_BANK2_BASE;
size_bank2 = addr + size - FLASH_BANK2_BASE;
#endif
}
/*Variable used for Erase procedure*/
@ -201,6 +209,7 @@ int stm32_flash_erase(rt_uint32_t addr, size_t size)
}
}
#ifdef FLASH_BANK_2
if(size_bank2)
{
EraseInitStruct.Sector = (addr_bank2 - FLASH_BANK2_BASE) / FLASH_SECTOR_SIZE;
@ -212,6 +221,7 @@ int stm32_flash_erase(rt_uint32_t addr, size_t size)
goto __exit;
}
}
#endif
__exit:

617
bsp/stm32/stm32h750-weact-ministm32h7xx/.config
View File

@ -17,12 +17,22 @@ CONFIG_RT_THREAD_PRIORITY_MAX=32
CONFIG_RT_TICK_PER_SECOND=1000
CONFIG_RT_USING_OVERFLOW_CHECK=y
CONFIG_RT_USING_HOOK=y
CONFIG_RT_HOOK_USING_FUNC_PTR=y
CONFIG_RT_USING_IDLE_HOOK=y
CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
CONFIG_IDLE_THREAD_STACK_SIZE=256
# CONFIG_RT_USING_TIMER_SOFT is not set
#
# kservice optimization
#
CONFIG_RT_KSERVICE_USING_STDLIB=y
# CONFIG_RT_KSERVICE_USING_STDLIB_MEMORY is not set
# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
# CONFIG_RT_USING_TINY_FFS is not set
# CONFIG_RT_KPRINTF_USING_LONGLONG is not set
CONFIG_RT_DEBUG=y
# CONFIG_RT_DEBUG_COLOR is not set
CONFIG_RT_DEBUG_COLOR=y
# CONFIG_RT_DEBUG_INIT_CONFIG is not set
# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
@ -48,11 +58,19 @@ CONFIG_RT_USING_MESSAGEQUEUE=y
# Memory Management
#
CONFIG_RT_USING_MEMPOOL=y
CONFIG_RT_USING_MEMHEAP=y
# CONFIG_RT_USING_NOHEAP is not set
# CONFIG_RT_USING_SMALL_MEM is not set
# CONFIG_RT_USING_SLAB is not set
CONFIG_RT_USING_MEMHEAP=y
CONFIG_RT_MEMHEAP_FAST_MODE=y
# CONFIG_RT_MEMHEAP_BSET_MODE is not set
# CONFIG_RT_USING_SMALL_MEM_AS_HEAP is not set
CONFIG_RT_USING_MEMHEAP_AS_HEAP=y
CONFIG_RT_USING_MEMHEAP_AUTO_BINDING=y
# CONFIG_RT_USING_SLAB_AS_HEAP is not set
# CONFIG_RT_USING_USERHEAP is not set
# CONFIG_RT_USING_NOHEAP is not set
# CONFIG_RT_USING_MEMTRACE is not set
# CONFIG_RT_USING_HEAP_ISR is not set
CONFIG_RT_USING_HEAP=y
#
@ -64,7 +82,7 @@ CONFIG_RT_USING_DEVICE=y
CONFIG_RT_USING_CONSOLE=y
CONFIG_RT_CONSOLEBUF_SIZE=128
CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
CONFIG_RT_VER_NUM=0x40003
CONFIG_RT_VER_NUM=0x50000
CONFIG_ARCH_ARM=y
CONFIG_RT_USING_CPU_FFS=y
CONFIG_ARCH_ARM_CORTEX_M=y
@ -78,35 +96,24 @@ CONFIG_RT_USING_COMPONENTS_INIT=y
CONFIG_RT_USING_USER_MAIN=y
CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
CONFIG_RT_MAIN_THREAD_PRIORITY=10
#
# C++ features
#
# CONFIG_RT_USING_CPLUSPLUS is not set
#
# Command shell
#
# CONFIG_RT_USING_LEGACY is not set
CONFIG_RT_USING_MSH=y
CONFIG_RT_USING_FINSH=y
CONFIG_FINSH_USING_MSH=y
CONFIG_FINSH_THREAD_NAME="tshell"
CONFIG_FINSH_THREAD_PRIORITY=20
CONFIG_FINSH_THREAD_STACK_SIZE=4096
CONFIG_FINSH_USING_HISTORY=y
CONFIG_FINSH_HISTORY_LINES=5
CONFIG_FINSH_USING_SYMTAB=y
CONFIG_FINSH_CMD_SIZE=80
CONFIG_MSH_USING_BUILT_IN_COMMANDS=y
CONFIG_FINSH_USING_DESCRIPTION=y
# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
CONFIG_FINSH_THREAD_PRIORITY=20
CONFIG_FINSH_THREAD_STACK_SIZE=4096
CONFIG_FINSH_CMD_SIZE=80
# CONFIG_FINSH_USING_AUTH is not set
CONFIG_FINSH_USING_MSH=y
CONFIG_FINSH_USING_MSH_DEFAULT=y
CONFIG_FINSH_USING_MSH_ONLY=y
CONFIG_FINSH_ARG_MAX=10
#
# Device virtual file system
#
CONFIG_RT_USING_DFS=y
CONFIG_DFS_USING_POSIX=y
CONFIG_DFS_USING_WORKDIR=y
CONFIG_DFS_FILESYSTEMS_MAX=4
CONFIG_DFS_FILESYSTEM_TYPES_MAX=4
@ -116,22 +123,28 @@ CONFIG_DFS_FD_MAX=16
CONFIG_RT_USING_DFS_DEVFS=y
# CONFIG_RT_USING_DFS_ROMFS is not set
# CONFIG_RT_USING_DFS_RAMFS is not set
# CONFIG_RT_USING_DFS_UFFS is not set
# CONFIG_RT_USING_DFS_JFFS2 is not set
CONFIG_RT_USING_FAL=y
CONFIG_FAL_DEBUG_CONFIG=y
CONFIG_FAL_DEBUG=1
CONFIG_FAL_PART_HAS_TABLE_CFG=y
CONFIG_FAL_USING_SFUD_PORT=y
CONFIG_FAL_USING_NOR_FLASH_DEV_NAME="norflash0"
# CONFIG_RT_USING_LWP is not set
#
# Device Drivers
#
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
CONFIG_RT_USING_SERIAL=y
# CONFIG_RT_USING_SERIAL_V1 is not set
CONFIG_RT_USING_SERIAL_V2=y
CONFIG_RT_SERIAL_USING_DMA=y
CONFIG_RT_SERIAL_RB_BUFSZ=64
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
# CONFIG_RT_USING_I2C is not set
# CONFIG_RT_USING_PHY is not set
CONFIG_RT_USING_PIN=y
# CONFIG_RT_USING_ADC is not set
# CONFIG_RT_USING_DAC is not set
@ -142,13 +155,14 @@ CONFIG_RT_USING_MTD_NOR=y
# CONFIG_RT_USING_RTC is not set
# CONFIG_RT_USING_SDIO is not set
CONFIG_RT_USING_SPI=y
# CONFIG_RT_USING_SPI_BITOPS is not set
CONFIG_RT_USING_QSPI=y
# CONFIG_RT_USING_SPI_MSD is not set
CONFIG_RT_USING_SFUD=y
CONFIG_RT_SFUD_USING_SFDP=y
CONFIG_RT_SFUD_USING_FLASH_INFO_TABLE=y
CONFIG_RT_SFUD_USING_QSPI=y
CONFIG_RT_SFUD_SPI_MAX_HZ=50000000
CONFIG_RT_SFUD_SPI_MAX_HZ=10000000
# CONFIG_RT_DEBUG_SFUD is not set
# CONFIG_RT_USING_ENC28J60 is not set
# CONFIG_RT_USING_SPI_WIFI is not set
@ -164,56 +178,59 @@ CONFIG_RT_SFUD_SPI_MAX_HZ=50000000
#
# Using USB
#
# CONFIG_RT_USING_USB is not set
# CONFIG_RT_USING_USB_HOST is not set
# CONFIG_RT_USING_USB_DEVICE is not set
#
# POSIX layer and C standard library
# C/C++ and POSIX layer
#
CONFIG_RT_USING_LIBC=y
CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
#
# POSIX (Portable Operating System Interface) layer
#
# CONFIG_RT_USING_POSIX_FS is not set
# CONFIG_RT_USING_POSIX_DELAY is not set
# CONFIG_RT_USING_POSIX_CLOCK is not set
# CONFIG_RT_USING_POSIX_TIMER is not set
# CONFIG_RT_USING_PTHREADS is not set
CONFIG_RT_USING_POSIX=y
# CONFIG_RT_USING_POSIX_MMAP is not set
# CONFIG_RT_USING_POSIX_TERMIOS is not set
# CONFIG_RT_USING_POSIX_AIO is not set
# CONFIG_RT_USING_MODULE is not set
#
# Interprocess Communication (IPC)
#
# CONFIG_RT_USING_POSIX_PIPE is not set
# CONFIG_RT_USING_POSIX_MESSAGE_QUEUE is not set
# CONFIG_RT_USING_POSIX_MESSAGE_SEMAPHORE is not set
#
# Socket is in the 'Network' category
#
# CONFIG_RT_USING_CPLUSPLUS is not set
#
# Network
#
#
# Socket abstraction layer
#
# CONFIG_RT_USING_SAL is not set
#
# Network interface device
#
# CONFIG_RT_USING_NETDEV is not set
#
# light weight TCP/IP stack
#
# CONFIG_RT_USING_LWIP is not set
#
# AT commands
#
# CONFIG_RT_USING_AT is not set
#
# VBUS(Virtual Software BUS)
#
# CONFIG_RT_USING_VBUS is not set
#
# Utilities
#
# CONFIG_RT_USING_RYM is not set
# CONFIG_RT_USING_ULOG is not set
# CONFIG_RT_USING_UTEST is not set
# CONFIG_RT_USING_LWP is not set
# CONFIG_RT_USING_VAR_EXPORT is not set
# CONFIG_RT_USING_RT_LINK is not set
# CONFIG_RT_USING_VBUS is not set
#
# RT-Thread Utestcases
#
# CONFIG_RT_USING_UTESTCASES is not set
#
# RT-Thread online packages
@ -222,6 +239,7 @@ CONFIG_RT_USING_POSIX=y
#
# IoT - internet of things
#
# CONFIG_PKG_USING_LWIP is not set
# CONFIG_PKG_USING_LORAWAN_DRIVER is not set
# CONFIG_PKG_USING_PAHOMQTT is not set
# CONFIG_PKG_USING_UMQTT is not set
@ -232,12 +250,8 @@ CONFIG_RT_USING_POSIX=y
# CONFIG_PKG_USING_KAWAII_MQTT is not set
# CONFIG_PKG_USING_BC28_MQTT is not set
# CONFIG_PKG_USING_WEBTERMINAL is not set
# CONFIG_PKG_USING_CJSON is not set
# CONFIG_PKG_USING_JSMN is not set
# CONFIG_PKG_USING_LIBMODBUS is not set
# CONFIG_PKG_USING_FREEMODBUS is not set
# CONFIG_PKG_USING_LJSON is not set
# CONFIG_PKG_USING_EZXML is not set
# CONFIG_PKG_USING_NANOPB is not set
#
@ -262,6 +276,7 @@ CONFIG_RT_USING_POSIX=y
# CONFIG_PKG_USING_AT_DEVICE is not set
# CONFIG_PKG_USING_ATSRV_SOCKET is not set
# CONFIG_PKG_USING_WIZNET is not set
# CONFIG_PKG_USING_ZB_COORDINATOR is not set
#
# IoT Cloud
@ -274,7 +289,10 @@ CONFIG_RT_USING_POSIX=y
# CONFIG_PKG_USING_JIOT-C-SDK is not set
# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
# CONFIG_PKG_USING_JOYLINK is not set
# CONFIG_PKG_USING_EZ_IOT_OS is not set
# CONFIG_PKG_USING_IOTSHARP_SDK is not set
# CONFIG_PKG_USING_NIMBLE is not set
# CONFIG_PKG_USING_LLSYNC_SDK_ADAPTER is not set
# CONFIG_PKG_USING_OTA_DOWNLOADER is not set
# CONFIG_PKG_USING_IPMSG is not set
# CONFIG_PKG_USING_LSSDP is not set
@ -282,23 +300,38 @@ CONFIG_RT_USING_POSIX=y
# CONFIG_PKG_USING_LIBRWS is not set
# CONFIG_PKG_USING_TCPSERVER is not set
# CONFIG_PKG_USING_PROTOBUF_C is not set
# CONFIG_PKG_USING_ONNX_PARSER is not set
# CONFIG_PKG_USING_ONNX_BACKEND is not set
# CONFIG_PKG_USING_DLT645 is not set
# CONFIG_PKG_USING_QXWZ is not set
# CONFIG_PKG_USING_SMTP_CLIENT is not set
# CONFIG_PKG_USING_ABUP_FOTA is not set
# CONFIG_PKG_USING_LIBCURL2RTT is not set
# CONFIG_PKG_USING_CAPNP is not set
# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
# CONFIG_PKG_USING_AGILE_TELNET is not set
# CONFIG_PKG_USING_NMEALIB is not set
# CONFIG_PKG_USING_PDULIB is not set
# CONFIG_PKG_USING_BTSTACK is not set
# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
# CONFIG_PKG_USING_WAYZ_IOTKIT is not set
# CONFIG_PKG_USING_MAVLINK is not set
# CONFIG_PKG_USING_BSAL is not set
# CONFIG_PKG_USING_AGILE_MODBUS is not set
# CONFIG_PKG_USING_AGILE_FTP is not set
# CONFIG_PKG_USING_EMBEDDEDPROTO is not set
# CONFIG_PKG_USING_RT_LINK_HW is not set
# CONFIG_PKG_USING_LORA_PKT_FWD is not set
# CONFIG_PKG_USING_LORA_GW_DRIVER_LIB is not set
# CONFIG_PKG_USING_LORA_PKT_SNIFFER is not set
# CONFIG_PKG_USING_HM is not set
# CONFIG_PKG_USING_SMALL_MODBUS is not set
# CONFIG_PKG_USING_NET_SERVER is not set
# CONFIG_PKG_USING_ZFTP is not set
#
# security packages
#
# CONFIG_PKG_USING_MBEDTLS is not set
# CONFIG_PKG_USING_libsodium is not set
# CONFIG_PKG_USING_LIBSODIUM is not set
# CONFIG_PKG_USING_LIBHYDROGEN is not set
# CONFIG_PKG_USING_TINYCRYPT is not set
# CONFIG_PKG_USING_TFM is not set
# CONFIG_PKG_USING_YD_CRYPTO is not set
@ -306,18 +339,72 @@ CONFIG_RT_USING_POSIX=y
#
# language packages
#
#
# JSON: JavaScript Object Notation, a lightweight data-interchange format
#
# CONFIG_PKG_USING_CJSON is not set
# CONFIG_PKG_USING_LJSON is not set
# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
# CONFIG_PKG_USING_RAPIDJSON is not set
# CONFIG_PKG_USING_JSMN is not set
# CONFIG_PKG_USING_AGILE_JSMN is not set
# CONFIG_PKG_USING_PARSON is not set
#
# XML: Extensible Markup Language
#
# CONFIG_PKG_USING_SIMPLE_XML is not set
# CONFIG_PKG_USING_EZXML is not set
# CONFIG_PKG_USING_LUATOS_SOC is not set
# CONFIG_PKG_USING_LUA is not set
# CONFIG_PKG_USING_JERRYSCRIPT is not set
# CONFIG_PKG_USING_MICROPYTHON is not set
# CONFIG_PKG_USING_PIKASCRIPT is not set
# CONFIG_PKG_USING_RTT_RUST is not set
#
# multimedia packages
#
#
# LVGL: powerful and easy-to-use embedded GUI library
#
# CONFIG_PKG_USING_LVGL is not set
# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
# CONFIG_PKG_USING_LV_MUSIC_DEMO is not set
# CONFIG_PKG_USING_GUI_GUIDER_DEMO is not set
#
# u8g2: a monochrome graphic library
#
# CONFIG_PKG_USING_U8G2_OFFICIAL is not set
# CONFIG_PKG_USING_U8G2 is not set
# CONFIG_PKG_USING_OPENMV is not set
# CONFIG_PKG_USING_MUPDF is not set
# CONFIG_PKG_USING_STEMWIN is not set
# CONFIG_PKG_USING_WAVPLAYER is not set
# CONFIG_PKG_USING_TJPGD is not set
# CONFIG_PKG_USING_PDFGEN is not set
# CONFIG_PKG_USING_HELIX is not set
# CONFIG_PKG_USING_AZUREGUIX is not set
# CONFIG_PKG_USING_TOUCHGFX2RTT is not set
# CONFIG_PKG_USING_NUEMWIN is not set
# CONFIG_PKG_USING_MP3PLAYER is not set
# CONFIG_PKG_USING_TINYJPEG is not set
# CONFIG_PKG_USING_UGUI is not set
#
# PainterEngine: A cross-platform graphics application framework written in C language
#
# CONFIG_PKG_USING_PAINTERENGINE is not set
# CONFIG_PKG_USING_PAINTERENGINE_AUX is not set
# CONFIG_PKG_USING_MCURSES is not set
# CONFIG_PKG_USING_TERMBOX is not set
# CONFIG_PKG_USING_VT100 is not set
# CONFIG_PKG_USING_QRCODE is not set
# CONFIG_PKG_USING_GUIENGINE is not set
# CONFIG_PKG_USING_PERSIMMON is not set
#
# tools packages
@ -326,48 +413,89 @@ CONFIG_RT_USING_POSIX=y
# CONFIG_PKG_USING_EASYFLASH is not set
# CONFIG_PKG_USING_EASYLOGGER is not set
# CONFIG_PKG_USING_SYSTEMVIEW is not set
# CONFIG_PKG_USING_SEGGER_RTT is not set
# CONFIG_PKG_USING_RDB is not set
# CONFIG_PKG_USING_QRCODE is not set
# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
# CONFIG_PKG_USING_ULOG_FILE is not set
# CONFIG_PKG_USING_LOGMGR is not set
# CONFIG_PKG_USING_ADBD is not set
# CONFIG_PKG_USING_COREMARK is not set
# CONFIG_PKG_USING_DHRYSTONE is not set
# CONFIG_PKG_USING_MEMORYPERF is not set
# CONFIG_PKG_USING_NR_MICRO_SHELL is not set
# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set
# CONFIG_PKG_USING_LUNAR_CALENDAR is not set
# CONFIG_PKG_USING_BS8116A is not set
# CONFIG_PKG_USING_GPS_RMC is not set
# CONFIG_PKG_USING_URLENCODE is not set
# CONFIG_PKG_USING_UMCN is not set
# CONFIG_PKG_USING_LWRB2RTT is not set
# CONFIG_PKG_USING_CPU_USAGE is not set
# CONFIG_PKG_USING_GBK2UTF8 is not set
# CONFIG_PKG_USING_VCONSOLE is not set
# CONFIG_PKG_USING_KDB is not set
# CONFIG_PKG_USING_WAMR is not set
# CONFIG_PKG_USING_MICRO_XRCE_DDS_CLIENT is not set
# CONFIG_PKG_USING_LWLOG is not set
# CONFIG_PKG_USING_ANV_TRACE is not set
# CONFIG_PKG_USING_ANV_MEMLEAK is not set
# CONFIG_PKG_USING_ANV_TESTSUIT is not set
# CONFIG_PKG_USING_ANV_BENCH is not set
# CONFIG_PKG_USING_DEVMEM is not set
# CONFIG_PKG_USING_REGEX is not set
# CONFIG_PKG_USING_MEM_SANDBOX is not set
# CONFIG_PKG_USING_SOLAR_TERMS is not set
# CONFIG_PKG_USING_GAN_ZHI is not set
# CONFIG_PKG_USING_FDT is not set
# CONFIG_PKG_USING_CBOX is not set
# CONFIG_PKG_USING_SNOWFLAKE is not set
# CONFIG_PKG_USING_HASH_MATCH is not set
# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
# CONFIG_PKG_USING_ARMV7M_DWT_TOOL is not set
# CONFIG_PKG_USING_VOFA_PLUS is not set
#
# system packages
#
# CONFIG_PKG_USING_GUIENGINE is not set
# CONFIG_PKG_USING_PERSIMMON is not set
#
# enhanced kernel services
#
# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set
# CONFIG_PKG_USING_RT_VSNPRINTF_FULL is not set
#
# acceleration: Assembly language or algorithmic acceleration packages
#
# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set
# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set
# CONFIG_PKG_USING_QFPLIB_M3 is not set
#
# CMSIS: ARM Cortex-M Microcontroller Software Interface Standard
#
# CONFIG_PKG_USING_CMSIS_5 is not set
# CONFIG_PKG_USING_CMSIS_RTOS1 is not set
# CONFIG_PKG_USING_CMSIS_RTOS2 is not set
#
# Micrium: Micrium software products porting for RT-Thread
#
# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set
# CONFIG_PKG_USING_UCOSII_WRAPPER is not set
# CONFIG_PKG_USING_UC_CRC is not set
# CONFIG_PKG_USING_UC_CLK is not set
# CONFIG_PKG_USING_UC_COMMON is not set
# CONFIG_PKG_USING_UC_MODBUS is not set
# CONFIG_PKG_USING_FREERTOS_WRAPPER is not set
# CONFIG_PKG_USING_CAIRO is not set
# CONFIG_PKG_USING_PIXMAN is not set
# CONFIG_PKG_USING_LWEXT4 is not set
# CONFIG_PKG_USING_PARTITION is not set
CONFIG_PKG_USING_FAL=y
CONFIG_PKG_FAL_PATH="/packages/system/fal"
CONFIG_FAL_DEBUG_CONFIG=y
CONFIG_FAL_DEBUG=1
CONFIG_FAL_PART_HAS_TABLE_CFG=y
CONFIG_FAL_USING_SFUD_PORT=y
CONFIG_FAL_USING_NOR_FLASH_DEV_NAME="W25Q64"
CONFIG_PKG_USING_FAL_V00500=y
# CONFIG_PKG_USING_FAL_V00400 is not set
# CONFIG_PKG_USING_FAL_V00300 is not set
# CONFIG_PKG_USING_FAL_V00200 is not set
# CONFIG_PKG_USING_FAL_V00100 is not set
# CONFIG_PKG_USING_FAL_LATEST_VERSION is not set
CONFIG_PKG_FAL_VER="v0.5.0"
CONFIG_PKG_FAL_VER_NUM=0x00500
# CONFIG_PKG_USING_PERF_COUNTER is not set
# CONFIG_PKG_USING_FLASHDB is not set
# CONFIG_PKG_USING_SQLITE is not set
# CONFIG_PKG_USING_RTI is not set
# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
# CONFIG_PKG_USING_CMSIS is not set
# CONFIG_PKG_USING_DFS_YAFFS is not set
CONFIG_PKG_USING_LITTLEFS=y
CONFIG_PKG_LITTLEFS_PATH="/packages/system/littlefs"
@ -377,14 +505,23 @@ CONFIG_PKG_LITTLEFS_PATH="/packages/system/littlefs"
# CONFIG_PKG_USING_LITTLEFS_V201 is not set
CONFIG_PKG_USING_LITTLEFS_V205=y
# CONFIG_PKG_USING_LITTLEFS_V214 is not set
# CONFIG_PKG_USING_LITTLEFS_V220 is not set
# CONFIG_PKG_USING_LITTLEFS_V221 is not set
# CONFIG_PKG_USING_LITTLEFS_V230 is not set
# CONFIG_PKG_USING_LITTLEFS_V250 is not set
# CONFIG_PKG_USING_LITTLEFS_LATEST_VERSION is not set
CONFIG_LFS_READ_SIZE=256
CONFIG_LFS_PROG_SIZE=256
CONFIG_LFS_BLOCK_SIZE=4096
CONFIG_LFS_CACHE_SIZE=256
CONFIG_LFS_BLOCK_CYCLES=100
# CONFIG_DFS_LFS_READONLY is not set
CONFIG_LFS_THREADSAFE=y
CONFIG_LFS_LOOKAHEAD_MAX=128
CONFIG_PKG_LITTLEFS_VER="v2.0.5"
# CONFIG_PKG_USING_DFS_JFFS2 is not set
# CONFIG_PKG_USING_DFS_UFFS is not set
# CONFIG_PKG_USING_LWEXT4 is not set
# CONFIG_PKG_USING_THREAD_POOL is not set
# CONFIG_PKG_USING_ROBOTS is not set
# CONFIG_PKG_USING_EV is not set
@ -394,6 +531,19 @@ CONFIG_PKG_LITTLEFS_VER="v2.0.5"
# CONFIG_PKG_USING_RAMDISK is not set
# CONFIG_PKG_USING_MININI is not set
# CONFIG_PKG_USING_QBOOT is not set
# CONFIG_PKG_USING_PPOOL is not set
# CONFIG_PKG_USING_OPENAMP is not set
# CONFIG_PKG_USING_LPM is not set
# CONFIG_PKG_USING_TLSF is not set
# CONFIG_PKG_USING_EVENT_RECORDER is not set
# CONFIG_PKG_USING_ARM_2D is not set
# CONFIG_PKG_USING_MCUBOOT is not set
# CONFIG_PKG_USING_TINYUSB is not set
# CONFIG_PKG_USING_CHERRYUSB is not set
# CONFIG_PKG_USING_KMULTI_RTIMER is not set
# CONFIG_PKG_USING_TFDB is not set
# CONFIG_PKG_USING_QPC is not set
# CONFIG_PKG_USING_AGILE_UPGRADE is not set
#
# peripheral libraries and drivers
@ -402,9 +552,11 @@ CONFIG_PKG_LITTLEFS_VER="v2.0.5"
# CONFIG_PKG_USING_REALTEK_AMEBA is not set
# CONFIG_PKG_USING_SHT2X is not set
# CONFIG_PKG_USING_SHT3X is not set
# CONFIG_PKG_USING_ADT74XX is not set
# CONFIG_PKG_USING_AS7341 is not set
# CONFIG_PKG_USING_STM32_SDIO is not set
# CONFIG_PKG_USING_ESP_IDF is not set
# CONFIG_PKG_USING_ICM20608 is not set
# CONFIG_PKG_USING_U8G2 is not set
# CONFIG_PKG_USING_BUTTON is not set
# CONFIG_PKG_USING_PCF8574 is not set
# CONFIG_PKG_USING_SX12XX is not set
@ -415,9 +567,14 @@ CONFIG_PKG_LITTLEFS_VER="v2.0.5"
# CONFIG_PKG_USING_NRF5X_SDK is not set
# CONFIG_PKG_USING_NRFX is not set
# CONFIG_PKG_USING_WM_LIBRARIES is not set
#
# Kendryte SDK
#
# CONFIG_PKG_USING_K210_SDK is not set
# CONFIG_PKG_USING_KENDRYTE_SDK is not set
# CONFIG_PKG_USING_INFRARED is not set
# CONFIG_PKG_USING_ROSSERIAL is not set
# CONFIG_PKG_USING_MULTI_INFRARED is not set
# CONFIG_PKG_USING_AGILE_BUTTON is not set
# CONFIG_PKG_USING_AGILE_LED is not set
# CONFIG_PKG_USING_AT24CXX is not set
@ -441,29 +598,63 @@ CONFIG_PKG_LITTLEFS_VER="v2.0.5"
# CONFIG_PKG_USING_PMS_SERIES is not set
# CONFIG_PKG_USING_CAN_YMODEM is not set
# CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set
CONFIG_BSP_USING_SPI1=y
# CONFIG_PKG_USING_QLED is not set
# CONFIG_PKG_USING_PAJ7620 is not set
# CONFIG_PKG_USING_AGILE_CONSOLE is not set
# CONFIG_PKG_USING_LD3320 is not set
# CONFIG_PKG_USING_WK2124 is not set
# CONFIG_PKG_USING_LY68L6400 is not set
# CONFIG_PKG_USING_DM9051 is not set
# CONFIG_PKG_USING_SSD1306 is not set
# CONFIG_PKG_USING_QKEY is not set
# CONFIG_PKG_USING_RS485 is not set
# CONFIG_PKG_USING_RS232 is not set
# CONFIG_PKG_USING_NES is not set
# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set
# CONFIG_PKG_USING_VDEVICE is not set
# CONFIG_PKG_USING_SGM706 is not set
# CONFIG_PKG_USING_STM32WB55_SDK is not set
# CONFIG_PKG_USING_RDA58XX is not set
# CONFIG_PKG_USING_LIBNFC is not set
# CONFIG_PKG_USING_MFOC is not set
# CONFIG_PKG_USING_TMC51XX is not set
# CONFIG_PKG_USING_TCA9534 is not set
# CONFIG_PKG_USING_KOBUKI is not set
# CONFIG_PKG_USING_ROSSERIAL is not set
# CONFIG_PKG_USING_MICRO_ROS is not set
# CONFIG_PKG_USING_MCP23008 is not set
# CONFIG_PKG_USING_BLUETRUM_SDK is not set
# CONFIG_PKG_USING_MISAKA_AT24CXX is not set
# CONFIG_PKG_USING_MISAKA_RGB_BLING is not set
# CONFIG_PKG_USING_LORA_MODEM_DRIVER is not set
# CONFIG_PKG_USING_BL_MCU_SDK is not set
# CONFIG_PKG_USING_SOFT_SERIAL is not set
# CONFIG_PKG_USING_MB85RS16 is not set
# CONFIG_PKG_USING_CW2015 is not set
# CONFIG_PKG_USING_RFM300 is not set
# CONFIG_PKG_USING_IO_INPUT_FILTER is not set
# CONFIG_PKG_USING_RASPBERRYPI_PICO_SDK is not set
#
# AI packages
#
# CONFIG_PKG_USING_LIBANN is not set
# CONFIG_PKG_USING_NNOM is not set
# CONFIG_PKG_USING_ONNX_BACKEND is not set
# CONFIG_PKG_USING_ONNX_PARSER is not set
# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
# CONFIG_PKG_USING_ELAPACK is not set
# CONFIG_PKG_USING_ULAPACK is not set
# CONFIG_PKG_USING_QUEST is not set
# CONFIG_PKG_USING_NAXOS is not set
#
# miscellaneous packages
#
# CONFIG_PKG_USING_LIBCSV is not set
# CONFIG_PKG_USING_OPTPARSE is not set
# CONFIG_PKG_USING_FASTLZ is not set
# CONFIG_PKG_USING_MINILZO is not set
# CONFIG_PKG_USING_QUICKLZ is not set
# CONFIG_PKG_USING_MULTIBUTTON is not set
# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
# CONFIG_PKG_USING_CANFESTIVAL is not set
# CONFIG_PKG_USING_ZLIB is not set
# CONFIG_PKG_USING_DSTR is not set
# CONFIG_PKG_USING_TINYFRAME is not set
# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
# CONFIG_PKG_USING_DIGITALCTRL is not set
# CONFIG_PKG_USING_UPACKER is not set
# CONFIG_PKG_USING_UPARAM is not set
#
# project laboratory
#
#
# samples: kernel and components samples
@ -472,16 +663,222 @@ CONFIG_BSP_USING_SPI1=y
# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
#
# entertainment: terminal games and other interesting software packages
#
# CONFIG_PKG_USING_CMATRIX is not set
# CONFIG_PKG_USING_SL is not set
# CONFIG_PKG_USING_CAL is not set
# CONFIG_PKG_USING_ACLOCK is not set
# CONFIG_PKG_USING_THREES is not set
# CONFIG_PKG_USING_2048 is not set
# CONFIG_PKG_USING_SNAKE is not set
# CONFIG_PKG_USING_TETRIS is not set
# CONFIG_PKG_USING_DONUT is not set
# CONFIG_PKG_USING_COWSAY is not set
# CONFIG_PKG_USING_LIBCSV is not set
# CONFIG_PKG_USING_OPTPARSE is not set
# CONFIG_PKG_USING_FASTLZ is not set
# CONFIG_PKG_USING_MINILZO is not set
# CONFIG_PKG_USING_QUICKLZ is not set
# CONFIG_PKG_USING_LZMA is not set
# CONFIG_PKG_USING_MULTIBUTTON is not set
# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
# CONFIG_PKG_USING_CANFESTIVAL is not set
# CONFIG_PKG_USING_ZLIB is not set
# CONFIG_PKG_USING_MINIZIP is not set
# CONFIG_PKG_USING_HEATSHRINK is not set
# CONFIG_PKG_USING_DSTR is not set
# CONFIG_PKG_USING_TINYFRAME is not set
# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
# CONFIG_PKG_USING_DIGITALCTRL is not set
# CONFIG_PKG_USING_UPACKER is not set
# CONFIG_PKG_USING_UPARAM is not set
# CONFIG_PKG_USING_HELLO is not set
# CONFIG_PKG_USING_VI is not set
# CONFIG_PKG_USING_NNOM is not set
# CONFIG_PKG_USING_LIBANN is not set
# CONFIG_PKG_USING_ELAPACK is not set
# CONFIG_PKG_USING_KI is not set
# CONFIG_PKG_USING_ARMv7M_DWT is not set
# CONFIG_PKG_USING_VT100 is not set
# CONFIG_PKG_USING_ULAPACK is not set
# CONFIG_PKG_USING_UKAL is not set
# CONFIG_PKG_USING_CRCLIB is not set
# CONFIG_PKG_USING_LWGPS is not set
# CONFIG_PKG_USING_STATE_MACHINE is not set
# CONFIG_PKG_USING_DESIGN_PATTERN is not set
# CONFIG_PKG_USING_CONTROLLER is not set
# CONFIG_PKG_USING_PHASE_LOCKED_LOOP is not set
# CONFIG_PKG_USING_MFBD is not set
# CONFIG_PKG_USING_SLCAN2RTT is not set
# CONFIG_PKG_USING_SOEM is not set
# CONFIG_PKG_USING_QPARAM is not set
#
# Arduino libraries
#
# CONFIG_PKG_USING_RTDUINO is not set
#
# Projects
#
# CONFIG_PKG_USING_ARDUINO_ULTRASOUND_RADAR is not set
# CONFIG_PKG_USING_ARDUINO_SENSOR_KIT is not set
# CONFIG_PKG_USING_ARDUINO_MATLAB_SUPPORT is not set
#
# Sensors
#
# CONFIG_PKG_USING_ARDUINO_SEEED_BMP280 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL375 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL53L0X is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_LIS3DHTR is not set
# CONFIG_PKG_USING_ARDUINO_SEEED_DHT is not set
# CONFIG_PKG_USING_ARDUINO_CAPACITIVESENSOR is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSOR is not set
# CONFIG_PKG_USING_ADAFRUIT_MAX31855 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31865 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31856 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90614 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM9DS1 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AHTX0 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM9DS0 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP280 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADT7410 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP085 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BME680 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP9808 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP4728 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_INA219 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LTR390 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL345 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DHT is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP9600 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM6DS is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO055 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX1704X is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MMC56X3 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90393 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90395 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ICM20X is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DPS310 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTS221 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHT4X is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHT31 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL343 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BME280 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AS726X is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AMG88XX is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AM2320 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AM2315 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LTR329_LTR303 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP085_UNIFIED is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP183 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP183_UNIFIED is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP3XX is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MS8607 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS3MDL is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90640 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MMA8451 is not set
# CONFIG_PKG_USING_ADAFRUIT_MSA301 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPL115A2 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO08X is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO08X_RVC is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS2MDL is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM303DLH_MAG is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LC709203F is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_CAP1188 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_CCS811 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_NAU7802 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS331 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LPS2X is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LPS35HW is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM303_ACCEL is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS3DH is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCF8591 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPL3115A2 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPR121 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPRLS is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPU6050 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCT2075 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PM25AQI is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_EMC2101 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_FXAS21002C is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SCD30 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_FXOS8700 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HMC5883_UNIFIED is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SGP30 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP006 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TLA202X is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TCS34725 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI7021 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI1145 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SGP40 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHTC3 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HDC1000 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTU21DF is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AS7341 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTU31D is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_INA260 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP007_LIBRARY is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_L3GD20 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP117 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSC2007 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSL2561 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSL2591_LIBRARY is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VCNL4040 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML6070 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML6075 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML7700 is not set
#
# Display
#
# CONFIG_PKG_USING_ARDUINO_U8G2 is not set
#
# Timing
#
# CONFIG_PKG_USING_ARDUINO_MSTIMER2 is not set
#
# Data Processing
#
# CONFIG_PKG_USING_ARDUINO_KALMANFILTER is not set
# CONFIG_PKG_USING_ARDUINO_ARDUINOJSON is not set
#
# Data Storage
#
#
# Communication
#
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PN532 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI4713 is not set
#
# Device Control
#
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCF8574 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCA9685 is not set
#
# Other
#
#
# Signal IO
#
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BUSIO is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TCA8418 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP23017 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADS1X15 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AW9523 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP3008 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP4725 is not set
# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BD3491FS is not set
#
# Uncategorized
#
CONFIG_SOC_FAMILY_STM32=y
CONFIG_SOC_SERIES_STM32H7=y
@ -496,7 +893,8 @@ CONFIG_SOC_STM32H750VBT6=y
CONFIG_BSP_USING_SPI_FLASH=y
CONFIG_BSP_USING_QSPI_FLASH=y
CONFIG_BSP_USING_LCD_SPI=y
CONFIG_LCD_BACKLIGHT_USING_PWM=y
# CONFIG_LCD_BACKLIGHT_USING_PWM is not set
CONFIG_LCD_BACKLIGHT_USING_GPIO=y
#
# On-chip Peripheral Drivers
@ -507,6 +905,7 @@ CONFIG_BSP_USING_UART1=y
# CONFIG_BSP_UART1_RX_USING_DMA is not set
CONFIG_BSP_USING_QSPI=y
CONFIG_BSP_USING_SPI=y
CONFIG_BSP_USING_SPI1=y
CONFIG_BSP_USING_SPI4=y
# CONFIG_BSP_QSPI_USING_DMA is not set
# CONFIG_BSP_USING_I2C1 is not set

6
bsp/stm32/stm32h750-weact-ministm32h7xx/Kconfig
View File

@ -8,14 +8,14 @@ config BSP_DIR
config RTT_DIR
string
option env="RTT_ROOT"
default "rt-thread"
default "../../.."
config PKGS_DIR
string
option env="PKGS_ROOT"
default "packages"
source "$RTT_DIR/Kconfig"
source "$PKGS_DIR/Kconfig"
source "libraries/Kconfig"
source "../libraries/Kconfig"
source "board/Kconfig"

12
bsp/stm32/stm32h750-weact-ministm32h7xx/README.md
View File

@ -14,7 +14,7 @@
## 开发板介绍
STM32H7xx Core Board 是 WeAct Studio 推出的一款基于 ARM Cortex-M7 内核的核心板，最高频率为480Mhz，具有128KB ROM（实际上为2MB）、1MB RAM，外接8MB SPI Flash和8MB QSPI Flash，所具有的按键和接口如下：
STM32H7xx Core Board 是 WeAct Studio 推出的一款基于 ARM Cortex-M7 内核的核心板，最高频率为480Mhz，具有128KB ROM（实际上 2MB ROM 可用）、1MB RAM，外接8MB SPI Flash和8MB QSPI Flash，所具有的按键和接口如下：
* 2*22 Pin 2.54mm I/O x 2
* 4 Pin 2.54mm SW x 1
@ -90,9 +90,9 @@ STM32H7xx Core Board 是 WeAct Studio 推出的一款基于 ARM Cortex-M7 内核
```bash
\ | /
- RT - Thread Operating System
/ | \ 4.0.3 build Aug 6 2020
2006 - 2020 Copyright by rt-thread team
msh >
/ | \ 5.0.0 build Oct 15 2022 16:28:21
2006 - 2022 Copyright by RT-Thread team
msh />
```
### 进阶使用
@ -110,6 +110,10 @@ msh >
## 注意事项
- 如果固件超过 128k ，且使用 Keil 下载请注意：
- 在 keil 中芯片选为 H743 ，此时会出现 2MB Flash 的下载算法，选择此下载算法下载程序
- 将该文件夹下 STM32H7x_2048.FLM 放到 `Keil安装目录\Keil_v5\ARM\Flash` 中，并选择此下载算法
- 其余方式下载代码情况类似
- 调试串口为串口1 映射说明
PB14 ------> USART1_TX

10
bsp/stm32/stm32h750-weact-ministm32h7xx/SConstruct
View File

@ -7,10 +7,6 @@ if os.getenv('RTT_ROOT'):
else:
RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..')
# set RTT_ROOT
if not os.getenv("RTT_ROOT"):
RTT_ROOT="rt-thread"
sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
try:
from building import *
@ -24,14 +20,14 @@ TARGET = 'rt-thread.' + rtconfig.TARGET_EXT
DefaultEnvironment(tools=[])
env = Environment(tools = ['mingw'],
AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
CC = rtconfig.CC, CFLAGS = rtconfig.CFLAGS,
AR = rtconfig.AR, ARFLAGS = '-rc',
CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
if rtconfig.PLATFORM == 'iar':
env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
if rtconfig.PLATFORM in ['iccarm']:
env.Replace(CCCOM = ['$CC $CFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
env.Replace(ARFLAGS = [''])
env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map')

BIN
bsp/stm32/stm32h750-weact-ministm32h7xx/STM32H7x_2048.FLM Normal file
View File

Binary file not shown.

18
bsp/stm32/stm32h750-weact-ministm32h7xx/applications/SConscript
View File

@ -1,12 +1,16 @@
import rtconfig
from building import *
import os
cwd = GetCurrentDir()
CPPPATH = [cwd, str(Dir('#'))]
src = Split("""
main.c
""")
cwd = GetCurrentDir()
path = [cwd]
src = Glob('*.c')
group = DefineGroup('Applications', src, depend = [''])
group = DefineGroup('Applications', src, depend = [''], CPPPATH = path)
Return('group')
list = os.listdir(cwd)
for item in list:
if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
group = group + SConscript(os.path.join(item, 'SConscript'))
Return('group')

21
bsp/stm32/stm32h750-weact-ministm32h7xx/board/Kconfig
View File

@ -16,7 +16,7 @@ menu "Onboard Peripheral Drivers"
select RT_USING_DFS
select PKG_USING_LITTLEFS
select RT_USING_MTD_NOR
select PKG_USING_FAL
select RT_USING_FAL
select FAL_USING_SFUD_PORT
select RT_USING_SFUD
select RT_SFUD_USING_SFDP
@ -25,6 +25,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_QSPI_FLASH
bool "Enable QSPI FLASH (W25Q64)"
select BSP_USING_QSPI
select FAL_USING_SFUD_PORT
select RT_USING_SFUD
select RT_SFUD_USING_QSPI
default n
@ -39,10 +40,16 @@ menu "Onboard Peripheral Drivers"
select BSP_USING_PWM1
select BSP_USING_PWM1_CH2
default n
if BSP_USING_LCD_SPI
config LCD_BACKLIGHT_USING_PWM
bool "Enable back light(tim1_ch2 pwm1)"
default y
choice
prompt "choice back light"
default LCD_BACKLIGHT_USING_GPIO
config LCD_BACKLIGHT_USING_PWM
bool "LCD_BACKLIGHT_USING_PWM(tim1_ch2 pwm1)"
config LCD_BACKLIGHT_USING_GPIO
bool "LCD_BACKLIGHT_USING_GPIO(PE10)"
endchoice
endif
endmenu
@ -89,10 +96,6 @@ menu "On-chip Peripheral Drivers"
default n
endif
config BSP_QSPI_USING_DMA
bool "Enable QSPI DMA support"
default n
menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)"
default n
@ -173,7 +176,7 @@ menu "On-chip Peripheral Drivers"
select BSP_USBD_PHY_ULPI
default n
source "libraries/HAL_Drivers/Kconfig"
source "../libraries/HAL_Drivers/Kconfig"
endmenu

39
bsp/stm32/stm32h750-weact-ministm32h7xx/board/SConscript
View File

@ -1,38 +1,47 @@
import os
import rtconfig
from building import *
Import('SDK_LIB')
objs = []
cwd = GetCurrentDir()
list = os.listdir(cwd)
path = [cwd]
path += [cwd + '/CubeMX_Config/Inc']
path += [cwd + '/ports']
path += [cwd + '/port']
# add the general drivers.
src = Glob('board.c')
src += Glob('CubeMX_Config/Src/stm32h7xx_hal_msp.c')
if GetDepend(['BSP_USING_SPI_FLASH']):
src += Glob('ports/drv_spi_flash.c')
src += Glob('port/drv_spi_flash.c')
if GetDepend(['BSP_USING_QSPI_FLASH']):
src += Glob('ports/drv_qspi_flash.c')
src += Glob('port/drv_qspi_flash.c')
if GetDepend('BSP_USING_LCD_SPI'):
src = src + ['ports/drv_lcd_spi.c']
src = src + ['ports/st7735/lcd.c']
src = src + ['ports/st7735/st7735.c']
src = src + ['ports/st7735/st7735_reg.c']
src = src + ['ports/st7735/logo.c']
path += [cwd + '/ports/st7735']
src = src + ['port/drv_lcd_spi.c']
src = src + ['port/st7735/lcd.c']
src = src + ['port/st7735/st7735.c']
src = src + ['port/st7735/st7735_reg.c']
src = src + ['port/st7735/logo.c']
path += [cwd + '/port/st7735']
for item in list:
if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
objs = objs + SConscript(os.path.join(item, 'SConscript'))
startup_path_prefix = SDK_LIB
if rtconfig.CROSS_TOOL == 'gcc':
src += [cwd + '/../libraries/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/gcc/startup_stm32h750xx.s']
elif rtconfig.CROSS_TOOL == 'keil':
src += [cwd + '/../libraries/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/arm/startup_stm32h750xx.s']
elif rtconfig.CROSS_TOOL == 'iar':
src += [cwd + '/../libraries/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/iar/startup_stm32h750xx.s']
if rtconfig.PLATFORM in ['gcc']:
src += [startup_path_prefix + '/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/gcc/startup_stm32h750xx.s']
elif rtconfig.PLATFORM in ['armcc', 'armclang']:
src += [startup_path_prefix + '/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/arm/startup_stm32h750xx.s']
elif rtconfig.PLATFORM in ['iccarm']:
src += [startup_path_prefix + '/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/iar/startup_stm32h750xx.s']
# STM32H743xx || STM32H750xx || STM32F753xx
# You can select chips from the list above

62
bsp/stm32/stm32h750-weact-ministm32h7xx/board/board.h
View File

@ -21,14 +21,64 @@
extern "C" {
#endif
#define STM32_FLASH_START_ADRESS ((uint32_t)0x08000000)
#define STM32_FLASH_SIZE (128 * 1024)
#define STM32_FLASH_END_ADDRESS ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE))
/*-------------------------- CHIP CONFIG BEGIN --------------------------*/
#define STM32_SRAM_SIZE (128)//DTCM
#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024)
#define CHIP_FAMILY_STM32
#define CHIP_SERIES_STM32H7
#define CHIP_NAME_STM32H750XBHX
#if defined(__CC_ARM) || defined(__CLANG_ARM)
/*-------------------------- CHIP CONFIG END --------------------------*/
/*-------------------------- ROM/RAM CONFIG BEGIN --------------------------*/
#define ROM_START ((uint32_t)0x80000000)
#define ROM_SIZE (128)
#define ROM_END ((uint32_t)(ROM_START + ROM_SIZE * 1024))
#define RAM_START (0x20000000)//DTCM_region
#define RAM_SIZE (128)
#define RAM_END (RAM_START + RAM_SIZE * 1024)
/*-------------------------- ROM/RAM CONFIG END --------------------------*/
/*-------------------------- CLOCK CONFIG BEGIN --------------------------*/
#define BSP_CLOCK_SOURCE ("HSE")
#define BSP_CLOCK_SOURCE_FREQ_MHZ ((int32_t)0)
#define BSP_CLOCK_SYSTEM_FREQ_MHZ ((int32_t)480)
/*-------------------------- CLOCK CONFIG END --------------------------*/
/*-------------------------- UART CONFIG BEGIN --------------------------*/
/** After configuring corresponding UART or UART DMA, you can use it.
*
* STEP 1, define macro define related to the serial port opening based on the serial port number
* such as #define BSP_USING_UATR1
*
* STEP 2, according to the corresponding pin of serial port, define the related serial port information macro
* such as #define BSP_UART1_TX_PIN "PA9"
* #define BSP_UART1_RX_PIN "PA10"
*
* STEP 3, if you want using SERIAL DMA, you must open it in the RT-Thread Settings.
* RT-Thread Setting -> Components -> Device Drivers -> Serial Device Drivers -> Enable Serial DMA Mode
*
* STEP 4, according to serial port number to define serial port tx/rx DMA function in the board.h file
* such as #define BSP_UART1_RX_USING_DMA
*
*/
#define BSP_UART1_RX_BUFSIZE 256
#define BSP_UART1_TX_BUFSIZE 256
#define STM32_FLASH_START_ADRESS ROM_START
#define STM32_FLASH_SIZE ROM_SIZE
#define STM32_FLASH_END_ADDRESS ROM_END
#define STM32_SRAM_SIZE RAM_SIZE
#define STM32_SRAM_START RAM_START
#define STM32_SRAM_END RAM_END
#if defined(__ARMCC_VERSION)
extern int Image$$RW_IRAM1$$ZI$$Limit;
#define HEAP_BEGIN (&Image$$RW_IRAM1$$ZI$$Limit)
#elif __ICCARM__

71
bsp/stm32/stm32h750-weact-ministm32h7xx/board/ports/drv_lcd_spi.c → bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/drv_lcd_spi.c
View File

@ -11,10 +11,11 @@
#include <board.h>
#ifdef BSP_USING_LCD_SPI
#include <lcd.h>
#include <lcd_port.h>
#include <string.h>
// #define DRV_DEBUG
#define DRV_DEBUG
#define LOG_TAG "drv.lcd"
#include <drv_log.h>
@ -53,46 +54,6 @@ static rt_err_t drv_lcd_control(struct rt_device *device, int cmd, void *args)
case RTGRAPHIC_CTRL_RECT_UPDATE:
{
LCD_FillRGBRect(0, 0, _lcd.lcd_info.framebuffer, _lcd.lcd_info.width, _lcd.lcd_info.height);
/* update */
// if (_lcd.cur_buf)
// {
// /* back_buf is being used */
// memcpy(_lcd.front_buf, _lcd.lcd_info.framebuffer, LCD_BUF_SIZE);
// /* Configure the color frame buffer start address */
// LCD_FillRGBRect(0, 0, _lcd.front_buf, _lcd.lcd_info.width, _lcd.lcd_info.height);
// _lcd.cur_buf = 0;
// }
// else
// {
// /* front_buf is being used */
// memcpy(_lcd.back_buf, _lcd.lcd_info.framebuffer, LCD_BUF_SIZE);
// /* Configure the color frame buffer start address */
// LCD_FillRGBRect(0, 0, _lcd.back_buf, _lcd.lcd_info.width, _lcd.lcd_info.height);
// _lcd.cur_buf = 1;
// }
// rt_sem_take(&_lcd.lcd_lock, RT_TICK_PER_SECOND / 20);
// /* update */
// if (_lcd.cur_buf)
// {
// /* back_buf is being used */
// memcpy(_lcd.front_buf, _lcd.lcd_info.framebuffer, LCD_BUF_SIZE);
// /* Configure the color frame buffer start address */
// LTDC_LAYER(&LtdcHandle, 0)->CFBAR &= ~(LTDC_LxCFBAR_CFBADD);
// LTDC_LAYER(&LtdcHandle, 0)->CFBAR = (uint32_t)(_lcd.front_buf);
// _lcd.cur_buf = 0;
// }
// else
// {
// /* front_buf is being used */
// memcpy(_lcd.back_buf, _lcd.lcd_info.framebuffer, LCD_BUF_SIZE);
// /* Configure the color frame buffer start address */
// LTDC_LAYER(&LtdcHandle, 0)->CFBAR &= ~(LTDC_LxCFBAR_CFBADD);
// LTDC_LAYER(&LtdcHandle, 0)->CFBAR = (uint32_t)(_lcd.back_buf);
// _lcd.cur_buf = 1;
// }
// rt_sem_take(&_lcd.lcd_lock, RT_TICK_PER_SECOND / 20);
// HAL_LTDC_Relaod(&LtdcHandle, LTDC_SRCR_VBR);
}
break;
@ -137,32 +98,6 @@ rt_err_t stm32_lcd_init(struct drv_lcd_device *lcd)
return result;
}
#if defined(LCD_BACKLIGHT_USING_PWM)
void turn_on_lcd_backlight(void)
{
struct rt_device_pwm *pwm_dev;
/* turn on the LCD backlight */
pwm_dev = (struct rt_device_pwm *)rt_device_find(LCD_PWM_DEV_NAME);
/* pwm frequency:100K = 10000ns */
rt_pwm_set(pwm_dev, LCD_PWM_DEV_CHANNEL, 10000, 5000);
rt_pwm_enable(pwm_dev, LCD_PWM_DEV_CHANNEL);
}
#elif defined(LCD_BACKLIGHT_USING_GPIO)
void turn_on_lcd_backlight(void)
{
rt_pin_mode(LCD_BL_GPIO_NUM, PIN_MODE_OUTPUT);
rt_pin_mode(LCD_DISP_GPIO_NUM, PIN_MODE_OUTPUT);
rt_pin_write(LCD_DISP_GPIO_NUM, PIN_HIGH);
rt_pin_write(LCD_BL_GPIO_NUM, PIN_HIGH);
}
#else
void turn_on_lcd_backlight(void)
{
}
#endif
#ifdef RT_USING_DEVICE_OPS
const static struct rt_device_ops lcd_ops =
@ -234,7 +169,7 @@ int drv_lcd_hw_init(void)
}
else
{
turn_on_lcd_backlight();
LCD_SetBrightness(MAX_BRIGHTNESS);
}
__exit:

179
bsp/stm32/stm32h750-weact-ministm32h7xx/board/ports/drv_qspi_flash.c → bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/drv_qspi_flash.c
View File

@ -28,111 +28,17 @@
#include <drv_log.h>
#define QSPI_CS_PIN GET_PIN(B, 6)
#define FS_PARTITION_NAME "fs_qspi"
#define FAL_USING_NOR_FLASH_2_DEV_NAME "W25Q64_q"
#define FS_PARTITION_NAME "fs_qspi"
#define FAL_USING_NOR_FLASH_2_DEV_NAME "W25Q64_q"
static sfud_flash_t sfud_dev = NULL;
static int init(void);
static int read(long offset, uint8_t *buf, size_t size);
static int write(long offset, const uint8_t *buf, size_t size);
static int erase(long offset, size_t size);
static char w25qxx_read_status_register2(struct rt_qspi_device *device)
{
/* 0x35 read status register2 */
char instruction = 0x35, status;
rt_qspi_send_then_recv(device, &instruction, 1, &status, 1);
return status;
}
static void w25qxx_write_enable(struct rt_qspi_device *device)
{
/* 0x06 write enable */
char instruction = 0x06;
rt_qspi_send(device, &instruction, 1);
}
static void w25qxx_enter_qspi_mode(struct rt_qspi_device *device)
{
char status = 0;
/* 0x38 enter qspi mode */
char instruction = 0x38;
char write_status2_buf[2] = {0};
/* 0x31 write status register2 */
write_status2_buf[0] = 0x31;
status = w25qxx_read_status_register2(device);
if (!(status & 0x02))
{
status |= 1 << 1;
w25qxx_write_enable(device);
write_status2_buf[1] = status;
// rt_qspi_send(device, &write_status2_buf, 2);
rt_qspi_send(device, write_status2_buf, 2);
rt_qspi_send(device, &instruction, 1);
rt_kprintf("flash already enter qspi mode\n");
rt_thread_mdelay(10);
}
}
/* read the JEDEC SFDP command must run at 50 MHz or less */
#define RT_SFUD_DEFAULT_SPI_CFG \
{ \
.mode = RT_SPI_MODE_2 | RT_SPI_MSB, \
.data_width = 8, \
.max_hz = 20000000, \
}
#ifdef SFUD_USING_QSPI
#define RT_SFUD_DEFAULT_QSPI_CFG \
{ \
RT_SFUD_DEFAULT_SPI_CFG, \
.medium_size = 0x800000, \
.ddr_mode = 0, \
.qspi_dl_width = 4, \
}
#endif /* SFUD_USING_QSPI */
static int rt_hw_qspi_flash_with_sfud_init(void)
{
stm32_qspi_bus_attach_device("qspi1", "qspi10", RT_NULL, 4, RT_NULL, RT_NULL);
// stm32_qspi_bus_attach_device("qspi1", "qspi10", RT_NULL, 4, w25qxx_enter_qspi_mode, RT_NULL);
// stm32_qspi_bus_attach_device("qspi1", "qspi10", QSPI_CS_PIN, 4, w25qxx_enter_qspi_mode, RT_NULL);
/* init W25Q16 , And register as a block device */
struct rt_spi_configuration cfg = RT_SFUD_DEFAULT_SPI_CFG;
struct rt_qspi_configuration qspi_cfg = RT_SFUD_DEFAULT_QSPI_CFG;
// // return rt_sfud_flash_probe_ex(FAL_USING_NOR_FLASH_2_DEV_NAME, "qspi10", &cfg, &qspi_cfg);
if(RT_NULL == rt_sfud_flash_probe_ex(FAL_USING_NOR_FLASH_2_DEV_NAME, "qspi10", &cfg, &qspi_cfg))
// if (RT_NULL == rt_sfud_flash_probe(FAL_USING_NOR_FLASH_2_DEV_NAME, "qspi10"))
{
return -RT_ERROR;
}
return RT_EOK;
}
INIT_DEVICE_EXPORT(rt_hw_qspi_flash_with_sfud_init);
static sfud_flash_t sfud_dev = NULL;
struct fal_flash_dev nor_flash1 =
{
.name = FAL_USING_NOR_FLASH_2_DEV_NAME,
@ -140,7 +46,7 @@ struct fal_flash_dev nor_flash1 =
.len = 8 * 1024 * 1024,
.blk_size = 4096,
.ops = {init, read, write, erase},
.write_gran = 1
.write_gran = 4
};
static int init(void)
@ -205,40 +111,63 @@ static int erase(long offset, size_t size)
static int mnt_qspi(void)
{
struct rt_device *mtd_dev = RT_NULL;
mtd_dev = fal_mtd_nor_device_create(FS_PARTITION_NAME);
if (!mtd_dev)
char w25qxx_read_status_register2(struct rt_qspi_device *device)
{
/* 0x35 read status register2 */
char instruction = 0x35, status;
rt_qspi_send_then_recv(device, &instruction, 1, &status, 1);
return status;
}
void w25qxx_write_enable(struct rt_qspi_device *device)
{
/* 0x06 write enable */
char instruction = 0x06;
rt_qspi_send(device, &instruction, 1);
}
void w25qxx_enter_qspi_mode(struct rt_qspi_device *device)
{
char status = 0;
/* 0x38 enter qspi mode */
char instruction = 0x38;
char write_status2_buf[2] = {0};
/* 0x31 write status register2 */
write_status2_buf[0] = 0x31;
status = w25qxx_read_status_register2(device);
if (!(status & 0x02))
{
LOG_E("Can't create a mtd device on '%s' partition.", FS_PARTITION_NAME);
status |= 1 << 1;
w25qxx_write_enable(device);
write_status2_buf[1] = status;
rt_qspi_send(device, &write_status2_buf, 2);
rt_qspi_send(device, &instruction, 1);
rt_kprintf("flash already enter qspi mode\n");
rt_thread_mdelay(10);
}
else
}
static int rt_qspi_flash_init(void)
{
extern rt_spi_flash_device_t rt_sfud_flash_probe(const char *spi_flash_dev_name, const char *spi_dev_name);
stm32_qspi_bus_attach_device("qspi1", "qspi10", RT_NULL, 4, w25qxx_enter_qspi_mode, RT_NULL);
if (RT_NULL == rt_sfud_flash_probe(FAL_USING_NOR_FLASH_2_DEV_NAME, "qspi10"))
{
/* mount littlefs */
if (dfs_mount(FS_PARTITION_NAME, "/qspi", "lfs", 0, 0) == 0)
{
LOG_I("Filesystem initialized!");
}
else
{
dfs_mkfs("lfs", FS_PARTITION_NAME);
/* mount littlefs */
if (dfs_mount(FS_PARTITION_NAME, "/qspi", "lfs", 0, 0) == 0)
{
LOG_I("Filesystem initialized!");
}
else
{
LOG_E("Failed to initialize filesystem!");
}
}
LOG_E("Failed to probe flash device "FAL_USING_NOR_FLASH_2_DEV_NAME);
return -RT_ERROR;
}
return RT_EOK;
}
INIT_APP_EXPORT(mnt_qspi);
INIT_DEVICE_EXPORT(rt_qspi_flash_init);
#endif/* BSP_USING_QSPI_FLASH */

20
bsp/stm32/stm32h750-weact-ministm32h7xx/board/ports/drv_spi_flash.c → bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/drv_spi_flash.c
View File

@ -7,17 +7,22 @@
* Date Author Notes
* 2020-08-07 NU-LL first version
*/
#include <rtthread.h>
#include <rtdevice.h>
#include <drv_spi.h>
#include <spi_flash.h>
#include <spi_flash_sfud.h>
#include <fal.h>
#include <dfs_fs.h>
// #define DRV_DEBUG
#define LOG_TAG "drv.spiflash"
#define DRV_DEBUG
#define LOG_TAG "drv.spiflash"
#include <drv_log.h>
#define FS_PARTITION_NAME "filesystem"
#define FS_PARTITION_NAME "filesystem"
#define SPI_CS_GPIO GPIOD
#define SPI_CS_PIN GPIO_PIN_6
#define SPI_CS_GPIO GPIOD
#define SPI_CS_PIN GPIO_PIN_6
static int rt_hw_spi_flash_with_sfud_init(void)
{
@ -25,8 +30,9 @@ static int rt_hw_spi_flash_with_sfud_init(void)
rt_hw_spi_device_attach("spi1", "spi10", SPI_CS_GPIO, SPI_CS_PIN);
/* init W25Q16 , And register as a block device */
if (RT_NULL == rt_sfud_flash_probe("W25Q64", "spi10"))
if (RT_NULL == rt_sfud_flash_probe(FAL_USING_NOR_FLASH_DEV_NAME, "spi10"))
{
LOG_E("Failed to probe flash device "FAL_USING_NOR_FLASH_DEV_NAME);
return -RT_ERROR;
}
return err;
@ -59,7 +65,7 @@ static int mnt(void)
if (dfs_mount(FS_PARTITION_NAME, "/", "lfs", 0, 0) == 0)
{
mkdir("/qspi",0x777);
LOG_I("Filesystem initialized!");
LOG_I("mkdir /qspi. Filesystem initialized!");
}
else
{

16
bsp/stm32/stm32h750-weact-ministm32h7xx/board/ports/fal_cfg.h → bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/fal_cfg.h
View File

@ -25,10 +25,12 @@
#ifndef _FAL_CFG_H_
#define _FAL_CFG_H_
#ifdef RT_USING_FAL
#include <rtconfig.h>
#include <board.h>
#define NOR_FLASH_DEV_NAME "W25Q64"
#define FLASH_SIZE_GRANULARITY_128K (16 * 128 * 1024)
/* ===================== Flash device Configuration ========================= */
extern const struct fal_flash_dev stm32_onchip_flash_128k;
@ -45,12 +47,14 @@ extern struct fal_flash_dev nor_flash1;
/* ====================== Partition Configuration ========================== */
#ifdef FAL_PART_HAS_TABLE_CFG
/* partition table */
#define FAL_PART_TABLE \
{ \
{FAL_PART_MAGIC_WORD, "bootloader", "onchip_flash_128k", 0, 128*1024, 0}, \
{FAL_PART_MAGIC_WORD, "filesystem", NOR_FLASH_DEV_NAME, 0, 8*1024*1024, 0}, \
{FAL_PART_MAGIC_WORD, "fs_qspi", "W25Q64_q", 0, 8*1024*1024, 0}, \
#define FAL_PART_TABLE \
{ \
{FAL_PART_MAGIC_WORD, "bootloader", "onchip_flash_128k", 0, 128*1024, 0}, \
{FAL_PART_MAGIC_WORD, "filesystem", FAL_USING_NOR_FLASH_DEV_NAME, 0, 8*1024*1024, 0}, \
{FAL_PART_MAGIC_WORD, "fs_qspi", "W25Q64_q", 0, 8*1024*1024, 0}, \
}
#endif /* FAL_PART_HAS_TABLE_CFG */
#endif /* RT_USING_FAL */
#endif /* _FAL_CFG_H_ */

0
bsp/stm32/stm32h750-weact-ministm32h7xx/board/ports/lcd_port.h → bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/lcd_port.h
View File

36
bsp/stm32/stm32h750-weact-ministm32h7xx/board/ports/st7735/font.h → bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/st7735/font.h
View File

@ -1,23 +1,23 @@
#ifndef __FONT_H
#define __FONT_H
#define __FONT_H
//32*32汉字字模
const unsigned char hanzi32[]={
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x30,0xC0,0x01,0x00,0xE0,0xE0,0x01,0x00,0xC0,0xE1,0x00,0x00,0xC0,0x61,0x00,0x18,0x80,0xF1,0xFF,0x3F,0x00,0x70,0x00,0x18,0x00,0x3E,0x00,0x18,0x04,0xDA,0x01,0x18,0x1C,0xEE,0x01,0x18,0x38,0x6F,0x60,0x18,0x78,0xF7,0xFF,0x18,0x70,0x31,0x86,0x18,0xB0,0x19,0x06,0x18,0x80,0x09,0x06,0x18,0x80,0x05,0x86,0x19,0xC0,0xFE,0xFF,0x1B,0xC0,0x00,0x06,0x1A,0xC0,0x30,0x66,0x18,0xE0,0x70,0xE6,0x19,0x7C,0x30,0xE6,0x18,0x70,0x30,0xE6,0x18,0x60,0x30,0xE6,0x18,0x70,0xF8,0xFF,0x1C,0x70,0x30,0xE0,0x1C,0x70,0x00,0x00,0x1C,0x70,0x00,0xF0,0x1F,0x70,0x00,0x80,0x0F,0x00,0x00,0x00,0x07,0x00,0x00,0x00,0x00,//淘
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x0E,0xC0,0x01,0x00,0xFE,0xFF,0x03,0x00,0x0E,0xC0,0x01,0x00,0x0E,0xC0,0x01,0x00,0x0E,0xC0,0x01,0x00,0xFE,0xFF,0x01,0x00,0x0E,0xC0,0x01,0x00,0x0E,0xC0,0x01,0x00,0x0E,0xC0,0x01,0x00,0xFE,0xFF,0x01,0x00,0x0E,0xC0,0x01,0x00,0x06,0x40,0x00,0x00,0x00,0x00,0x00,0x30,0x70,0x0C,0x18,0xF0,0xFF,0xFC,0x3F,0x70,0x70,0x0C,0x18,0x70,0x70,0x0C,0x18,0x70,0x70,0x0C,0x18,0x70,0x70,0x0C,0x18,0xF0,0x7F,0xFC,0x1F,0x70,0x70,0x0C,0x18,0x70,0x70,0x0C,0x18,0x70,0x70,0x0C,0x18,0x70,0x70,0x0C,0x18,0x70,0x70,0x0C,0x18,0xF0,0x7F,0xFC,0x1F,0x70,0x70,0x0C,0x18,0x10,0x00,0x04,0x00,0x00,0x00,0x00,0x00,//晶
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x00,0x00,0x00,0x70,0x00,0x00,0x1C,0x70,0x00,0xFC,0x1F,0x70,0x00,0x00,0x8C,0x71,0x00,0x20,0x8C,0x77,0x00,0xE0,0x8C,0x73,0x04,0xF0,0x8E,0x73,0x1E,0x70,0x8E,0xF3,0x1F,0x70,0x8E,0xFB,0x0C,0x70,0x8E,0x7F,0x0C,0x70,0xFE,0x73,0x0C,0x30,0x86,0x73,0x0C,0x30,0x86,0x73,0x0C,0x30,0x96,0x73,0x0C,0xF8,0xBF,0x73,0x0C,0x38,0xF8,0x73,0x0C,0x00,0xB8,0x73,0x0C,0x00,0xB8,0xF3,0x0F,0x00,0xBE,0x73,0x06,0xE0,0x9B,0x73,0x30,0x7E,0x98,0x73,0x30,0x1C,0x98,0x13,0x30,0x08,0x9C,0x03,0x30,0x00,0x9C,0x03,0x30,0x00,0x8C,0x03,0x78,0xE0,0x0F,0xFF,0x7F,0x80,0x07,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x00,//驰
//32*32汉字字模
const unsigned char hanzi32[]={
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x30,0xC0,0x01,0x00,0xE0,0xE0,0x01,0x00,0xC0,0xE1,0x00,0x00,0xC0,0x61,0x00,0x18,0x80,0xF1,0xFF,0x3F,0x00,0x70,0x00,0x18,0x00,0x3E,0x00,0x18,0x04,0xDA,0x01,0x18,0x1C,0xEE,0x01,0x18,0x38,0x6F,0x60,0x18,0x78,0xF7,0xFF,0x18,0x70,0x31,0x86,0x18,0xB0,0x19,0x06,0x18,0x80,0x09,0x06,0x18,0x80,0x05,0x86,0x19,0xC0,0xFE,0xFF,0x1B,0xC0,0x00,0x06,0x1A,0xC0,0x30,0x66,0x18,0xE0,0x70,0xE6,0x19,0x7C,0x30,0xE6,0x18,0x70,0x30,0xE6,0x18,0x60,0x30,0xE6,0x18,0x70,0xF8,0xFF,0x1C,0x70,0x30,0xE0,0x1C,0x70,0x00,0x00,0x1C,0x70,0x00,0xF0,0x1F,0x70,0x00,0x80,0x0F,0x00,0x00,0x00,0x07,0x00,0x00,0x00,0x00,//淘
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x0E,0xC0,0x01,0x00,0xFE,0xFF,0x03,0x00,0x0E,0xC0,0x01,0x00,0x0E,0xC0,0x01,0x00,0x0E,0xC0,0x01,0x00,0xFE,0xFF,0x01,0x00,0x0E,0xC0,0x01,0x00,0x0E,0xC0,0x01,0x00,0x0E,0xC0,0x01,0x00,0xFE,0xFF,0x01,0x00,0x0E,0xC0,0x01,0x00,0x06,0x40,0x00,0x00,0x00,0x00,0x00,0x30,0x70,0x0C,0x18,0xF0,0xFF,0xFC,0x3F,0x70,0x70,0x0C,0x18,0x70,0x70,0x0C,0x18,0x70,0x70,0x0C,0x18,0x70,0x70,0x0C,0x18,0xF0,0x7F,0xFC,0x1F,0x70,0x70,0x0C,0x18,0x70,0x70,0x0C,0x18,0x70,0x70,0x0C,0x18,0x70,0x70,0x0C,0x18,0x70,0x70,0x0C,0x18,0xF0,0x7F,0xFC,0x1F,0x70,0x70,0x0C,0x18,0x10,0x00,0x04,0x00,0x00,0x00,0x00,0x00,//晶
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x00,0x00,0x00,0x70,0x00,0x00,0x1C,0x70,0x00,0xFC,0x1F,0x70,0x00,0x00,0x8C,0x71,0x00,0x20,0x8C,0x77,0x00,0xE0,0x8C,0x73,0x04,0xF0,0x8E,0x73,0x1E,0x70,0x8E,0xF3,0x1F,0x70,0x8E,0xFB,0x0C,0x70,0x8E,0x7F,0x0C,0x70,0xFE,0x73,0x0C,0x30,0x86,0x73,0x0C,0x30,0x86,0x73,0x0C,0x30,0x96,0x73,0x0C,0xF8,0xBF,0x73,0x0C,0x38,0xF8,0x73,0x0C,0x00,0xB8,0x73,0x0C,0x00,0xB8,0xF3,0x0F,0x00,0xBE,0x73,0x06,0xE0,0x9B,0x73,0x30,0x7E,0x98,0x73,0x30,0x1C,0x98,0x13,0x30,0x08,0x9C,0x03,0x30,0x00,0x9C,0x03,0x30,0x00,0x8C,0x03,0x78,0xE0,0x0F,0xFF,0x7F,0x80,0x07,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x00,//驰
};
//16*16汉字字模
const unsigned char hanzi16[]={
0x80,0x00,0x80,0x00,0x80,0x00,0xFC,0x1F,0x40,0x00,0x40,0x00,0xFF,0x7F,0x20,0x00,0x10,0x00,0xF0,0x0F,0x00,0x08,0x00,0x04,0x60,0x02,0x80,0x01,0x00,0x02,0x00,0x04,//专
0x00,0x01,0x04,0x02,0x08,0x00,0xE8,0x3F,0x01,0x02,0x02,0x02,0x02,0x02,0x08,0x02,0xC8,0x3F,0x04,0x02,0x07,0x02,0x04,0x02,0x04,0x02,0x04,0x02,0xF4,0x7F,0x00,0x00,//注
0x00,0x00,0xF8,0x0F,0x08,0x08,0x08,0x08,0xF8,0x0F,0x08,0x08,0x08,0x08,0xF8,0x0F,0x20,0x02,0x22,0x22,0x24,0x22,0x28,0x12,0x28,0x0A,0x20,0x02,0xFF,0x7F,0x00,0x00,//显
0x00,0x00,0xFC,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x7F,0x80,0x00,0x80,0x00,0x88,0x08,0x88,0x10,0x84,0x20,0x82,0x40,0x81,0x40,0xA0,0x00,0x40,0x00,//示
0x40,0x00,0x80,0x00,0x80,0x00,0xFF,0x7F,0x20,0x00,0x20,0x00,0x20,0x00,0xE0,0x0F,0x20,0x08,0x20,0x08,0x20,0x08,0x10,0x08,0x10,0x08,0x08,0x08,0x04,0x05,0x02,0x02,//方
0x80,0x00,0xFE,0x3F,0x02,0x20,0x20,0x00,0xFF,0x7F,0x10,0x04,0x78,0x02,0xC0,0x03,0x3C,0x1C,0x80,0x00,0xFF,0x7F,0xA0,0x02,0x90,0x04,0x8C,0x18,0x83,0x60,0x80,0x00,//案
//16*16汉字字模
const unsigned char hanzi16[]={
0x80,0x00,0x80,0x00,0x80,0x00,0xFC,0x1F,0x40,0x00,0x40,0x00,0xFF,0x7F,0x20,0x00,0x10,0x00,0xF0,0x0F,0x00,0x08,0x00,0x04,0x60,0x02,0x80,0x01,0x00,0x02,0x00,0x04,//专
0x00,0x01,0x04,0x02,0x08,0x00,0xE8,0x3F,0x01,0x02,0x02,0x02,0x02,0x02,0x08,0x02,0xC8,0x3F,0x04,0x02,0x07,0x02,0x04,0x02,0x04,0x02,0x04,0x02,0xF4,0x7F,0x00,0x00,//注
0x00,0x00,0xF8,0x0F,0x08,0x08,0x08,0x08,0xF8,0x0F,0x08,0x08,0x08,0x08,0xF8,0x0F,0x20,0x02,0x22,0x22,0x24,0x22,0x28,0x12,0x28,0x0A,0x20,0x02,0xFF,0x7F,0x00,0x00,//显
0x00,0x00,0xFC,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x7F,0x80,0x00,0x80,0x00,0x88,0x08,0x88,0x10,0x84,0x20,0x82,0x40,0x81,0x40,0xA0,0x00,0x40,0x00,//示
0x40,0x00,0x80,0x00,0x80,0x00,0xFF,0x7F,0x20,0x00,0x20,0x00,0x20,0x00,0xE0,0x0F,0x20,0x08,0x20,0x08,0x20,0x08,0x10,0x08,0x10,0x08,0x08,0x08,0x04,0x05,0x02,0x02,//方
0x80,0x00,0xFE,0x3F,0x02,0x20,0x20,0x00,0xFF,0x7F,0x10,0x04,0x78,0x02,0xC0,0x03,0x3C,0x1C,0x80,0x00,0xFF,0x7F,0xA0,0x02,0x90,0x04,0x8C,0x18,0x83,0x60,0x80,0x00,//案
};
//QQ图像
//QQ图像
const unsigned char qqimage[3200]={ /* 0X00,0X10,0X28,0X00,0X28,0X00,0X01,0X1B,*/
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XBE,0XF7,0X7D,0XEF,
@ -316,8 +316,8 @@ const unsigned char asc2_1206[95][12]={
{0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xF0,0x00,0x00,0x00,0x00},/*"|",92*/
{0x00,0x00,0x40,0x20,0x7B,0xE0,0x04,0x00,0x00,0x00,0x00,0x00},/*"}",93*/
{0x40,0x00,0x80,0x00,0x40,0x00,0x20,0x00,0x20,0x00,0x40,0x00},/*"~",94*/
};
const unsigned char asc2_1608[95][16]={
};
const unsigned char asc2_1608[95][16]={
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",0*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0xCC,0x00,0x0C,0x00,0x00,0x00,0x00,0x00,0x00},/*"!",1*/
{0x00,0x00,0x08,0x00,0x30,0x00,0x60,0x00,0x08,0x00,0x30,0x00,0x60,0x00,0x00,0x00},/*""",2*/
@ -413,5 +413,5 @@ const unsigned char asc2_1608[95][16]={
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00},/*"|",92*/
{0x00,0x00,0x40,0x02,0x40,0x02,0x3E,0xFC,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"}",93*/
{0x00,0x00,0x60,0x00,0x80,0x00,0x80,0x00,0x40,0x00,0x40,0x00,0x20,0x00,0x20,0x00},/*"~",94*/
};
};
#endif

237
bsp/stm32/stm32h750-weact-ministm32h7xx/board/ports/st7735/lcd.c → bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/st7735/lcd.c
View File

@ -1,28 +1,10 @@
#include "lcd.h"
#include "rttlogo.h"
#include "font.h"
// #define DRV_DEBUG
#define DRV_DEBUG
#define LOG_TAG "spi.lcd"
#include <drv_log.h>
#define LCD_SPI_DEVICE_NAME "spi40"
#define LCD_PWM_DEV_NAME "pwm1"
#define LCD_PWM_DEV_CHANNEL (2)
#define LCD_PWM_DEV_TIME (10000)//pwm frequency:100K = 10000ns
#define WR_RS_PIN GET_PIN(E, 13)
#define CS_PIN GET_PIN(E, 11)
//SPI显示屏接口
//LCD_RS
#define LCD_RS_SET rt_pin_write(WR_RS_PIN, PIN_HIGH)
#define LCD_RS_RESET rt_pin_write(WR_RS_PIN, PIN_LOW)
//LCD_CS
#define LCD_CS_SET rt_pin_write(CS_PIN, PIN_HIGH)
#define LCD_CS_RESET rt_pin_write(CS_PIN, PIN_LOW)
static int32_t lcd_init(void);
static int32_t lcd_writereg(uint8_t reg,uint8_t* pdata,uint32_t length);
static int32_t lcd_readreg(uint8_t reg,uint8_t* pdata);
@ -42,106 +24,51 @@ ST7735_IO_t st7735_pIO = {
ST7735_Object_t st7735_pObj;
uint32_t st7735_id;
static struct rt_spi_device *spi_dev_lcd;
#ifdef LCD_BACKLIGHT_USING_PWM
static struct rt_device_pwm *lcd_pwm_dev;
static uint32_t NowBrightness;
#endif
extern unsigned char WeActStudiologo[];
#ifdef DRV_DEBUG
#ifdef FINSH_USING_MSH
static int show_logo(int argc, char **argv)
{
uint8_t text[20];
// ST7735_LCD_Driver.ReadID(&st7735_pObj,&st7735_id);
// LCD_Light(LCD_PWM_DEV_TIME, 300);
ST7735_LCD_Driver.DrawBitmap(&st7735_pObj,0,0,WeActStudiologo);
LCD_SetBrightness(LCD_PWM_DEV_TIME-1);
rt_thread_mdelay(1000);
// LCD_SetBrightness(0);
// ST7735_LCD_Driver.FillRect(&st7735_pObj,0,0,160,80,BLACK);
// sprintf((char *)&text,"WeAct Studio");
// LCD_ShowString(4,4,160,16,16,text);
// sprintf((char *)&text,"STM32H7xx 0x%X",HAL_GetDEVID());
// LCD_ShowString(4,22,160,16,16,text);
// sprintf((char *)&text,"LCD ID: 0x%X",st7735_id);
// LCD_ShowString(4,40,160,16,16,text);
return 0;
}
MSH_CMD_EXPORT(show_logo, show logo);
#endif /* FINSH_USING_MSH */
#endif /* DRV_DEBUG */
static int LCD_Init(void)
{
rt_pin_mode(WR_RS_PIN, PIN_MODE_OUTPUT);
rt_pin_mode(CS_PIN, PIN_MODE_OUTPUT);
spi_dev_lcd = (struct rt_spi_device *)rt_device_find(LCD_SPI_DEVICE_NAME);
if (!spi_dev_lcd)
{
LOG_E("tft-lcd init failed! can't find %s device!\n", LCD_SPI_DEVICE_NAME);
return -RT_ERROR;
}
ST7735_RegisterBusIO(&st7735_pObj,&st7735_pIO);
if(ST7735_ERROR == ST7735_LCD_Driver.Init(&st7735_pObj,ST7735_FORMAT_RBG565,ST7735_ORIENTATION_LANDSCAPE_ROT180))
{
LOG_E("st7735 init failed!");
// return ;
}
ST7735_LCD_Driver.FillRect(&st7735_pObj,0,0,160,80,BLACK);
ST7735_LCD_Driver.ReadID(&st7735_pObj,&st7735_id);
ST7735_LCD_Driver.DisplayOn(&st7735_pObj);
LOG_D("lcd id:0X%08X", st7735_id);
LOG_D("chip id:0X%08X", HAL_GetDEVID());
/* turn on the LCD backlight */
lcd_pwm_dev = (struct rt_device_pwm *)rt_device_find(LCD_PWM_DEV_NAME);
if (!lcd_pwm_dev)
{
LOG_E("lcd pwm pin init failed! can't find %s device!\n", LCD_SPI_DEVICE_NAME);
return -RT_ERROR;
}
/* pwm frequency:100K = 10000ns */
rt_pwm_set(lcd_pwm_dev, LCD_PWM_DEV_CHANNEL, LCD_PWM_DEV_TIME, 5000);
rt_pwm_enable(lcd_pwm_dev, LCD_PWM_DEV_CHANNEL);
ST7735_LCD_Driver.DrawBitmap(&st7735_pObj,0,0,WeActStudiologo);
// ST7735_LCD_Driver.FillRGBRect(&st7735_pObj, 0, 0, (uint8_t *)image_rttlogo, 240, 69);
return RT_EOK;
}
INIT_COMPONENT_EXPORT(LCD_Init);
//LCD_RS
#define LCD_RS_SET rt_pin_write(WR_RS_PIN, PIN_HIGH)
#define LCD_RS_RESET rt_pin_write(WR_RS_PIN, PIN_LOW)
//LCD_CS
#define LCD_CS_SET rt_pin_write(CS_PIN, PIN_HIGH)
#define LCD_CS_RESET rt_pin_write(CS_PIN, PIN_LOW)
void LCD_SetBrightness(uint32_t Brightness)
{
Brightness = ((Brightness >= LCD_PWM_DEV_TIME)?(LCD_PWM_DEV_TIME-1):Brightness);
rt_pwm_set(lcd_pwm_dev, LCD_PWM_DEV_CHANNEL, LCD_PWM_DEV_TIME, Brightness);
#ifdef LCD_BACKLIGHT_USING_PWM
Brightness = ((Brightness >= MAX_BRIGHTNESS)?(MAX_BRIGHTNESS-1):Brightness);
rt_pwm_set(lcd_pwm_dev, LCD_PWM_DEV_CHANNEL, MAX_BRIGHTNESS, Brightness);
NowBrightness = Brightness;
#else
rt_pin_mode(LCD_DISP_GPIO_NUM, PIN_MODE_OUTPUT);
rt_pin_write(LCD_DISP_GPIO_NUM, PIN_LOW);
#endif
}
uint32_t LCD_GetBrightness(void)
{
#ifdef LCD_BACKLIGHT_USING_PWM
return NowBrightness;
#else
return 0;
#endif
}
uint16_t POINT_COLOR=0xFFFF; //画笔颜色
uint16_t BACK_COLOR=BLACK; //背景色
//在指定位置显示一个字符
//x,y:起始坐标
//num:要显示的字符:" "--->"~"
//size:字体大小 12/16
//mode:叠加方式(1)还是非叠加方式(0)
//在指定位置显示一个字符
//x,y:起始坐标
//num:要显示的字符:" "--->"~"
//size:字体大小 12/16
//mode:叠加方式(1)还是非叠加方式(0)
void LCD_ShowChar(uint16_t x,uint16_t y,uint8_t num,uint8_t size,uint8_t mode)
{
uint8_t temp,t1,t;
uint16_t y0=y;
uint16_t x0=x;
uint16_t colortemp=POINT_COLOR;
uint32_t h,w;
uint16_t write[size][size==12?6:8];
@ -150,85 +77,83 @@ void LCD_ShowChar(uint16_t x,uint16_t y,uint8_t num,uint8_t size,uint8_t mode)
ST7735_GetXSize(&st7735_pObj,&w);
ST7735_GetYSize(&st7735_pObj,&h);
//设置窗口
num=num-' ';//得到偏移后的值
//设置窗口
num=num-' ';//得到偏移后的值
count = 0;
if(!mode) //非叠加方式
if(!mode) //非叠加方式
{
for(t=0;t<size;t++)
{
if(size==12)temp=asc2_1206[num][t]; //调用1206字体
else temp=asc2_1608[num][t]; //调用1608字体
if(size==12)temp=asc2_1206[num][t]; //调用1206字体
else temp=asc2_1608[num][t]; //调用1608字体
for(t1=0;t1<8;t1++)
{
if(temp&0x80)
POINT_COLOR=(colortemp&0xFF)<<8|colortemp>>8;
write[count][t/2]=(BRUSH_POINT_COLOR&0xFF)<<8|BRUSH_POINT_COLOR>>8;
else
POINT_COLOR=(BACK_COLOR&0xFF)<<8|BACK_COLOR>>8;
write[count][t/2]=(BRUSH_BACK_COLOR&0xFF)<<8|BRUSH_BACK_COLOR>>8;
write[count][t/2]=POINT_COLOR;
count ++;
if(count >= size) count =0;
temp<<=1;
y++;
if(y>=h){POINT_COLOR=colortemp;return;}//超区域了
if(y>=h){return;}//超区域了
if((y-y0)==size)
{
y=y0;
x++;
if(x>=w){POINT_COLOR=colortemp;return;}//超区域了
if(x>=w){return;}//超区域了
break;
}
}
}
}
else//叠加方式
else//叠加方式
{
for(t=0;t<size;t++)
{
if(size==12)temp=asc2_1206[num][t]; //调用1206字体
else temp=asc2_1608[num][t]; //调用1608字体
if(size==12)temp=asc2_1206[num][t]; //调用1206字体
else temp=asc2_1608[num][t]; //调用1608字体
for(t1=0;t1<8;t1++)
{
if(temp&0x80)
write[count][t/2]=(POINT_COLOR&0xFF)<<8|POINT_COLOR>>8;
write[count][t/2]=(BRUSH_POINT_COLOR&0xFF)<<8|BRUSH_POINT_COLOR>>8;
count ++;
if(count >= size) count =0;
temp<<=1;
y++;
if(y>=h){POINT_COLOR=colortemp;return;}//超区域了
if(y>=h){return;}//超区域了
if((y-y0)==size)
{
y=y0;
x++;
if(x>=w){POINT_COLOR=colortemp;return;}//超区域了
if(x>=w){return;}//超区域了
break;
}
}
}
}
ST7735_FillRGBRect(&st7735_pObj,x0,y0,(uint8_t *)&write,size==12?6:8,size);
POINT_COLOR=colortemp;
}
//显示字符串
//x,y:起点坐标
//width,height:区域大小
//size:字体大小
//*p:字符串起始地址
//显示字符串
//x,y:起点坐标
//width,height:区域大小
//size:字体大小
//*p:字符串起始地址
void LCD_ShowString(uint16_t x,uint16_t y,uint16_t width,uint16_t height,uint8_t size,uint8_t *p)
{
uint8_t x0=x;
width+=x;
height+=y;
while((*p<='~')&&(*p>=' '))//判断是不是非法字符!
while((*p<='~')&&(*p>=' '))//判断是不是非法字符!
{
if(x>=width){x=x0;y+=size;}
if(y>=height)break;//退出
if(y>=height)break;//退出
LCD_ShowChar(x,y,*p,size,0);
x+=size/2;
p++;
@ -291,3 +216,71 @@ static int32_t lcd_recvdata(uint8_t* pdata,uint32_t length)
return ((result == length)?0:-1);
}
static int LCD_Init(void)
{
rt_pin_mode(WR_RS_PIN, PIN_MODE_OUTPUT);
rt_pin_mode(CS_PIN, PIN_MODE_OUTPUT);
spi_dev_lcd = (struct rt_spi_device *)rt_device_find(LCD_SPI_DEVICE_NAME);
if (!spi_dev_lcd)
{
LOG_E("tft-lcd init failed! can't find %s device!\n", LCD_SPI_DEVICE_NAME);
return -RT_ERROR;
}
ST7735_RegisterBusIO(&st7735_pObj,&st7735_pIO);
if(ST7735_ERROR == ST7735_LCD_Driver.Init(&st7735_pObj,ST7735_FORMAT_RBG565,ST7735_ORIENTATION_LANDSCAPE_ROT180))
{
LOG_E("st7735 init failed!");
// return ;
}
ST7735_LCD_Driver.FillRect(&st7735_pObj,0,0,160,80,BLACK);
ST7735_LCD_Driver.ReadID(&st7735_pObj,&st7735_id);
ST7735_LCD_Driver.DisplayOn(&st7735_pObj);
LOG_D("lcd id:0X%08X", st7735_id);
LOG_D("chip id:0X%08X", HAL_GetDEVID());
#ifdef LCD_BACKLIGHT_USING_PWM
/* turn on the LCD backlight */
lcd_pwm_dev = (struct rt_device_pwm *)rt_device_find(LCD_PWM_DEV_NAME);
if (!lcd_pwm_dev)
{
LOG_E("lcd pwm pin init failed! can't find %s device!\n", LCD_SPI_DEVICE_NAME);
return -RT_ERROR;
}
/* pwm frequency:100K = 10000ns */
rt_pwm_set(lcd_pwm_dev, LCD_PWM_DEV_CHANNEL, LCD_PWM_DEV_TIME, 5000);
rt_pwm_enable(lcd_pwm_dev, LCD_PWM_DEV_CHANNEL);
#endif
LCD_SetBrightness(MAX_BRIGHTNESS);
ST7735_LCD_Driver.DrawBitmap(&st7735_pObj,0,0,WeActStudiologo);
return RT_EOK;
}
INIT_COMPONENT_EXPORT(LCD_Init);
#ifdef DRV_DEBUG
#ifdef FINSH_USING_MSH
static int show_logo(int argc, char **argv)
{
uint8_t text[20];
LCD_SetBrightness(MAX_BRIGHTNESS);
ST7735_LCD_Driver.DrawBitmap(&st7735_pObj,0,0,WeActStudiologo);
rt_thread_mdelay(1000);
ST7735_LCD_Driver.FillRect(&st7735_pObj,0,0,160,80,BLACK);
sprintf((char *)&text,"WeAct Studio");
LCD_ShowString(4,4,160,16,16,text);
sprintf((char *)&text,"STM32H7xx 0x%X",HAL_GetDEVID());
LCD_ShowString(4,22,160,16,16,text);
sprintf((char *)&text,"LCD ID: 0x%X",st7735_id);
LCD_ShowString(4,40,160,16,16,text);
return 0;
}
MSH_CMD_EXPORT(show_logo, show logo);
#endif /* FINSH_USING_MSH */
#endif /* DRV_DEBUG */

33
bsp/stm32/stm32h750-weact-ministm32h7xx/board/ports/st7735/lcd.h → bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/st7735/lcd.h
View File

@ -18,20 +18,33 @@
#define GREEN 0x07E0
#define CYAN 0x7FFF
#define YELLOW 0xFFE0
#define BROWN 0XBC40 //×ØÉ«
#define BRRED 0XFC07 //×غìÉ«
#define GRAY 0X8430 //»ÒÉ«
#define DARKBLUE 0X01CF //ÉîÀ¶É«
#define LIGHTBLUE 0X7D7C //dzÀ¶É«
#define GRAYBLUE 0X5458 //»ÒÀ¶É«
#define BROWN 0XBC40 //棕色
#define BRRED 0XFC07 //棕红色
#define GRAY 0X8430 //灰色
#define DARKBLUE 0X01CF //深蓝色
#define LIGHTBLUE 0X7D7C //浅蓝色
#define GRAYBLUE 0X5458 //灰蓝色
// lcd spi
#define LCD_SPI_DEVICE_NAME "spi40"
#define LCD_PWM_DEV_NAME "pwm1"
#define LCD_PWM_DEV_CHANNEL (2)
#define LCD_PWM_DEV_TIME (10000)//pwm frequency:100K = 10000ns
#define MAX_BRIGHTNESS LCD_PWM_DEV_TIME
#define WR_RS_PIN GET_PIN(E, 13)
#define CS_PIN GET_PIN(E, 11)
//lcd display gpio
#define LCD_DISP_GPIO_NUM GET_PIN(E, 10)
// lcd brush color
#define BRUSH_POINT_COLOR WHITE
#define BRUSH_BACK_COLOR BLACK
extern ST7735_Object_t st7735_pObj;
extern uint32_t st7735_id;
extern uint16_t POINT_COLOR; //»­±ÊÑÕÉ«
extern uint16_t BACK_COLOR; //±³¾°É«
void LCD_SetBrightness(uint32_t Brightness);
uint32_t LCD_GetBrightness(void);
void LCD_ShowChar(uint16_t x,uint16_t y,uint8_t num,uint8_t size,uint8_t mode);

0
bsp/stm32/stm32h750-weact-ministm32h7xx/board/ports/st7735/logo.c → bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/st7735/logo.c
View File

0
bsp/stm32/stm32h750-weact-ministm32h7xx/board/ports/st7735/st7735.c → bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/st7735/st7735.c
View File

0
bsp/stm32/stm32h750-weact-ministm32h7xx/board/ports/st7735/st7735.h → bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/st7735/st7735.h
View File

0
bsp/stm32/stm32h750-weact-ministm32h7xx/board/ports/st7735/st7735_reg.c → bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/st7735/st7735_reg.c
View File

0
bsp/stm32/stm32h750-weact-ministm32h7xx/board/ports/st7735/st7735_reg.h → bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/st7735/st7735_reg.h
View File

2072
bsp/stm32/stm32h750-weact-ministm32h7xx/board/ports/st7735/rttlogo.h
View File

File diff suppressed because it is too large Load Diff

155
bsp/stm32/stm32h750-weact-ministm32h7xx/rtconfig.h
View File

@ -13,10 +13,16 @@
#define RT_TICK_PER_SECOND 1000
#define RT_USING_OVERFLOW_CHECK
#define RT_USING_HOOK
#define RT_HOOK_USING_FUNC_PTR
#define RT_USING_IDLE_HOOK
#define RT_IDLE_HOOK_LIST_SIZE 4
#define IDLE_THREAD_STACK_SIZE 256
/* kservice optimization */
#define RT_KSERVICE_USING_STDLIB
#define RT_DEBUG
#define RT_DEBUG_COLOR
/* Inter-Thread communication */
@ -30,7 +36,9 @@
#define RT_USING_MEMPOOL
#define RT_USING_MEMHEAP
#define RT_MEMHEAP_FAST_MODE
#define RT_USING_MEMHEAP_AS_HEAP
#define RT_USING_MEMHEAP_AUTO_BINDING
#define RT_USING_HEAP
/* Kernel Device Object */
@ -39,7 +47,7 @@
#define RT_USING_CONSOLE
#define RT_CONSOLEBUF_SIZE 128
#define RT_CONSOLE_DEVICE_NAME "uart1"
#define RT_VER_NUM 0x40003
#define RT_VER_NUM 0x50000
#define ARCH_ARM
#define RT_USING_CPU_FFS
#define ARCH_ARM_CORTEX_M
@ -51,42 +59,39 @@
#define RT_USING_USER_MAIN
#define RT_MAIN_THREAD_STACK_SIZE 2048
#define RT_MAIN_THREAD_PRIORITY 10
/* C++ features */
/* Command shell */
#define RT_USING_MSH
#define RT_USING_FINSH
#define FINSH_USING_MSH
#define FINSH_THREAD_NAME "tshell"
#define FINSH_THREAD_PRIORITY 20
#define FINSH_THREAD_STACK_SIZE 4096
#define FINSH_USING_HISTORY
#define FINSH_HISTORY_LINES 5
#define FINSH_USING_SYMTAB
#define FINSH_USING_DESCRIPTION
#define FINSH_THREAD_PRIORITY 20
#define FINSH_THREAD_STACK_SIZE 4096
#define FINSH_CMD_SIZE 80
#define FINSH_USING_MSH
#define FINSH_USING_MSH_DEFAULT
#define FINSH_USING_MSH_ONLY
#define MSH_USING_BUILT_IN_COMMANDS
#define FINSH_USING_DESCRIPTION
#define FINSH_ARG_MAX 10
/* Device virtual file system */
#define RT_USING_DFS
#define DFS_USING_POSIX
#define DFS_USING_WORKDIR
#define DFS_FILESYSTEMS_MAX 4
#define DFS_FILESYSTEM_TYPES_MAX 4
#define DFS_FD_MAX 16
#define RT_USING_DFS_DEVFS
#define RT_USING_FAL
#define FAL_DEBUG_CONFIG
#define FAL_DEBUG 1
#define FAL_PART_HAS_TABLE_CFG
#define FAL_USING_SFUD_PORT
#define FAL_USING_NOR_FLASH_DEV_NAME "norflash0"
/* Device Drivers */
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_USING_SERIAL_V2
#define RT_SERIAL_USING_DMA
#define RT_SERIAL_RB_BUFSZ 64
#define RT_USING_PIN
#define RT_USING_PWM
#define RT_USING_MTD_NOR
@ -96,36 +101,33 @@
#define RT_SFUD_USING_SFDP
#define RT_SFUD_USING_FLASH_INFO_TABLE
#define RT_SFUD_USING_QSPI
#define RT_SFUD_SPI_MAX_HZ 50000000
#define RT_SFUD_SPI_MAX_HZ 10000000
/* Using USB */
/* POSIX layer and C standard library */
/* C/C++ and POSIX layer */
#define RT_LIBC_DEFAULT_TIMEZONE 8
/* POSIX (Portable Operating System Interface) layer */
/* Interprocess Communication (IPC) */
/* Socket is in the 'Network' category */
#define RT_USING_LIBC
#define RT_USING_POSIX
/* Network */
/* Socket abstraction layer */
/* Network interface device */
/* light weight TCP/IP stack */
/* AT commands */
/* VBUS(Virtual Software BUS) */
/* Utilities */
/* RT-Thread Utestcases */
/* RT-Thread online packages */
/* IoT - internet of things */
@ -147,23 +149,39 @@
/* language packages */
/* JSON: JavaScript Object Notation, a lightweight data-interchange format */
/* XML: Extensible Markup Language */
/* multimedia packages */
/* LVGL: powerful and easy-to-use embedded GUI library */
/* u8g2: a monochrome graphic library */
/* PainterEngine: A cross-platform graphics application framework written in C language */
/* tools packages */
/* system packages */
#define PKG_USING_FAL
#define FAL_DEBUG_CONFIG
#define FAL_DEBUG 1
#define FAL_PART_HAS_TABLE_CFG
#define FAL_USING_SFUD_PORT
#define FAL_USING_NOR_FLASH_DEV_NAME "W25Q64"
#define PKG_USING_FAL_V00500
#define PKG_FAL_VER_NUM 0x00500
/* enhanced kernel services */
/* acceleration: Assembly language or algorithmic acceleration packages */
/* CMSIS: ARM Cortex-M Microcontroller Software Interface Standard */
/* Micrium: Micrium software products porting for RT-Thread */
#define PKG_USING_LITTLEFS
#define PKG_USING_LITTLEFS_V205
#define LFS_READ_SIZE 256
@ -171,17 +189,61 @@
#define LFS_BLOCK_SIZE 4096
#define LFS_CACHE_SIZE 256
#define LFS_BLOCK_CYCLES 100
#define LFS_THREADSAFE
#define LFS_LOOKAHEAD_MAX 128
/* peripheral libraries and drivers */
#define BSP_USING_SPI1
/* Kendryte SDK */
/* AI packages */
/* miscellaneous packages */
/* project laboratory */
/* samples: kernel and components samples */
/* entertainment: terminal games and other interesting software packages */
/* Arduino libraries */
/* Projects */
/* Sensors */
/* Display */
/* Timing */
/* Data Processing */
/* Data Storage */
/* Communication */
/* Device Control */
/* Other */
/* Signal IO */
/* Uncategorized */
#define SOC_FAMILY_STM32
#define SOC_SERIES_STM32H7
@ -194,7 +256,7 @@
#define BSP_USING_SPI_FLASH
#define BSP_USING_QSPI_FLASH
#define BSP_USING_LCD_SPI
#define LCD_BACKLIGHT_USING_PWM
#define LCD_BACKLIGHT_USING_GPIO
/* On-chip Peripheral Drivers */
@ -203,6 +265,7 @@
#define BSP_USING_UART1
#define BSP_USING_QSPI
#define BSP_USING_SPI
#define BSP_USING_SPI1
#define BSP_USING_SPI4
#define BSP_USING_PWM
#define BSP_USING_PWM1

70
bsp/stm32/stm32h750-weact-ministm32h7xx/rtconfig.py
View File

@ -17,13 +17,13 @@ if os.getenv('RTT_ROOT'):
# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
if CROSS_TOOL == 'gcc':
PLATFORM = 'gcc'
EXEC_PATH = r'C:\Users\XXYYZZ'
EXEC_PATH = r'/opt/gcc-arm-none-eabi/bin/'
elif CROSS_TOOL == 'keil':
PLATFORM = 'armcc'
EXEC_PATH = r'C:/Keil_v5'
EXEC_PATH = r'D:/Keil/Keil_v5'
elif CROSS_TOOL == 'iar':
PLATFORM = 'iar'
EXEC_PATH = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.0'
PLATFORM = 'iccarm'
EXEC_PATH = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.3'
if os.getenv('RTT_EXEC_PATH'):
EXEC_PATH = os.getenv('RTT_EXEC_PATH')
@ -57,7 +57,7 @@ if PLATFORM == 'gcc':
else:
CFLAGS += ' -O2'
CXXFLAGS = CFLAGS
CXXFLAGS = CFLAGS
CFLAGS += ' -std=c99'
POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
@ -89,12 +89,46 @@ elif PLATFORM == 'armcc':
else:
CFLAGS += ' -O2'
CXXFLAGS = CFLAGS
CXXFLAGS = CFLAGS
CFLAGS += ' -std=c99'
POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
elif PLATFORM == 'iar':
elif PLATFORM == 'armclang':
# toolchains
CC = 'armclang'
CXX = 'armclang'
AS = 'armasm'
AR = 'armar'
LINK = 'armlink'
TARGET_EXT = 'axf'
DEVICE = ' --cpu Cortex-M7.fp.sp '
CFLAGS = ' --target=arm-arm-none-eabi -mcpu=cortex-M7 '
CFLAGS += ' -mcpu=cortex-M7 -mfpu=fpv4-sp-d16 '
CFLAGS += ' -mfloat-abi=hard -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar '
CFLAGS += ' -gdwarf-3 -ffunction-sections '
AFLAGS = DEVICE + ' --apcs=interwork '
LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers '
LFLAGS += ' --list rt-thread.map '
LFLAGS += r' --strict --scatter "board\linker_scripts\link.sct" '
CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCLANG/include'
LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCLANG/lib'
EXEC_PATH += '/ARM/ARMCLANG/bin/'
if BUILD == 'debug':
CFLAGS += ' -g -O1' # armclang recommend
AFLAGS += ' -g'
else:
CFLAGS += ' -O2'
CXXFLAGS = CFLAGS
CFLAGS += ' -std=c99'
POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
elif PLATFORM == 'iccarm':
# toolchains
CC = 'iccarm'
CXX = 'iccarm'
@ -115,20 +149,20 @@ elif PLATFORM == 'iar':
CFLAGS += ' --no_clustering'
CFLAGS += ' --no_scheduling'
CFLAGS += ' --endian=little'
CFLAGS += ' --cpu=Cortex-M7'
CFLAGS += ' -e'
CFLAGS += ' --cpu=Cortex-M7'
CFLAGS += ' -e'
CFLAGS += ' --fpu=VFPv5_sp'
CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"'
CFLAGS += ' --silent'
AFLAGS = DEVICE
AFLAGS += ' -s+'
AFLAGS += ' -w+'
AFLAGS += ' -r'
AFLAGS += ' --cpu Cortex-M7'
AFLAGS += ' --fpu VFPv5_sp'
AFLAGS += ' -S'
AFLAGS += ' -s+'
AFLAGS += ' -w+'
AFLAGS += ' -r'
AFLAGS += ' --cpu Cortex-M7'
AFLAGS += ' --fpu VFPv5_sp'
AFLAGS += ' -S'
if BUILD == 'debug':
CFLAGS += ' --debug'
CFLAGS += ' -On'
@ -139,7 +173,7 @@ elif PLATFORM == 'iar':
LFLAGS += ' --entry __iar_program_start'
CXXFLAGS = CFLAGS
EXEC_PATH = EXEC_PATH + '/arm/bin/'
POST_ACTION = 'ielftool --bin $TARGET rtthread.bin'