[bsp]update
This commit is contained in:
yangjie
parent
b2a589b89e
commit
afee7fd2b9
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2020, RT-Thread Development Team
|
* Copyright (c) 2006-2021, RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
@ -46,12 +46,12 @@ int mdelay(int value)
|
||||||
#if defined (CONFIG_SMC911X_32_BIT)
|
#if defined (CONFIG_SMC911X_32_BIT)
|
||||||
rt_inline uint32_t smc911x_reg_read(struct eth_device_smc911x *dev, uint32_t offset)
|
rt_inline uint32_t smc911x_reg_read(struct eth_device_smc911x *dev, uint32_t offset)
|
||||||
{
|
{
|
||||||
return *(volatile uint32_t*)(dev->iobase + offset);
|
return *(volatile uint32_t *)(dev->iobase + offset);
|
||||||
}
|
}
|
||||||
|
|
||||||
rt_inline void smc911x_reg_write(struct eth_device_smc911x *dev, uint32_t offset, uint32_t val)
|
rt_inline void smc911x_reg_write(struct eth_device_smc911x *dev, uint32_t offset, uint32_t val)
|
||||||
{
|
{
|
||||||
*(volatile uint32_t*)(dev->iobase + offset) = val;
|
*(volatile uint32_t *)(dev->iobase + offset) = val;
|
||||||
}
|
}
|
||||||
|
|
||||||
#elif defined (CONFIG_SMC911X_16_BIT)
|
#elif defined (CONFIG_SMC911X_16_BIT)
|
||||||
|
|
@ -78,14 +78,14 @@ struct chip_id
|
||||||
|
|
||||||
static const struct chip_id chip_ids[] =
|
static const struct chip_id chip_ids[] =
|
||||||
{
|
{
|
||||||
{ CHIP_89218,"LAN89218" },
|
{ LAN9118_ID_89218, "LAN89218" },
|
||||||
{ LAN9118_ID_9115, "LAN9115" },
|
{ LAN9118_ID_9115, "LAN9115" },
|
||||||
{ LAN9118_ID_9116, "LAN9116" },
|
{ LAN9118_ID_9116, "LAN9116" },
|
||||||
{ LAN9118_ID_9117, "LAN9117" },
|
{ LAN9118_ID_9117, "LAN9117" },
|
||||||
{ LAN9118_ID_9118, "LAN9118" },
|
{ LAN9118_ID_9118, "LAN9118" },
|
||||||
{ LAN9210_ID_9211, "LAN9211" },
|
{ LAN9210_ID_9211, "LAN9211" },
|
||||||
{ LAN9218_ID_9215, "LAN9215" },
|
{ LAN9218_ID_9215, "LAN9215" },
|
||||||
{ CHIP_9216, "LAN9216" },
|
{ LAN9218_ID_9216, "LAN9216" },
|
||||||
{ LAN9218_ID_9217, "LAN9217" },
|
{ LAN9218_ID_9217, "LAN9217" },
|
||||||
{ LAN9218_ID_9218, "LAN9218" },
|
{ LAN9218_ID_9218, "LAN9218" },
|
||||||
{ LAN9220_ID_9220, "LAN9220" },
|
{ LAN9220_ID_9220, "LAN9220" },
|
||||||
|
|
@ -95,23 +95,23 @@ static const struct chip_id chip_ids[] =
|
||||||
|
|
||||||
static uint32_t smc911x_get_mac_csr(struct eth_device_smc911x *dev, uint8_t reg)
|
static uint32_t smc911x_get_mac_csr(struct eth_device_smc911x *dev, uint8_t reg)
|
||||||
{
|
{
|
||||||
while (smc911x_reg_read(dev, LAN9118_MAC_CSR_CMD) & LAN9118_LAN9118_MAC_CSR_CMD_BUSY) ;
|
while (smc911x_reg_read(dev, LAN9118_MAC_CSR_CMD) & LAN9118_MAC_CSR_CMD_BUSY) ;
|
||||||
|
|
||||||
smc911x_reg_write(dev, LAN9118_MAC_CSR_CMD, LAN9118_LAN9118_MAC_CSR_CMD_BUSY | LAN9118_LAN9118_MAC_CSR_CMD_R | reg);
|
smc911x_reg_write(dev, LAN9118_MAC_CSR_CMD, LAN9118_MAC_CSR_CMD_BUSY | LAN9118_MAC_CSR_CMD_R | reg);
|
||||||
|
|
||||||
while (smc911x_reg_read(dev, LAN9118_MAC_CSR_CMD) & LAN9118_LAN9118_MAC_CSR_CMD_BUSY) ;
|
while (smc911x_reg_read(dev, LAN9118_MAC_CSR_CMD) & LAN9118_MAC_CSR_CMD_BUSY) ;
|
||||||
|
|
||||||
return smc911x_reg_read(dev, LAN9118_MAC_CSR_DATA);
|
return smc911x_reg_read(dev, LAN9118_MAC_CSR_DATA);
|
||||||
}
|
}
|
||||||
|
|
||||||
static void smc911x_set_mac_csr(struct eth_device_smc911x *dev, uint8_t reg, uint32_t data)
|
static void smc911x_set_mac_csr(struct eth_device_smc911x *dev, uint8_t reg, uint32_t data)
|
||||||
{
|
{
|
||||||
while (smc911x_reg_read(dev, LAN9118_MAC_CSR_CMD) & LAN9118_LAN9118_MAC_CSR_CMD_BUSY) ;
|
while (smc911x_reg_read(dev, LAN9118_MAC_CSR_CMD) & LAN9118_MAC_CSR_CMD_BUSY) ;
|
||||||
|
|
||||||
smc911x_reg_write(dev, LAN9118_MAC_CSR_DATA, data);
|
smc911x_reg_write(dev, LAN9118_MAC_CSR_DATA, data);
|
||||||
smc911x_reg_write(dev, LAN9118_MAC_CSR_CMD, LAN9118_LAN9118_MAC_CSR_CMD_BUSY | reg);
|
smc911x_reg_write(dev, LAN9118_MAC_CSR_CMD, LAN9118_MAC_CSR_CMD_BUSY | reg);
|
||||||
|
|
||||||
while (smc911x_reg_read(dev, LAN9118_MAC_CSR_CMD) & LAN9118_LAN9118_MAC_CSR_CMD_BUSY) ;
|
while (smc911x_reg_read(dev, LAN9118_MAC_CSR_CMD) & LAN9118_MAC_CSR_CMD_BUSY) ;
|
||||||
}
|
}
|
||||||
|
|
||||||
static int smc911x_detect_chip(struct eth_device_smc911x *dev)
|
static int smc911x_detect_chip(struct eth_device_smc911x *dev)
|
||||||
|
|
@ -176,7 +176,7 @@ static void smc911x_reset(struct eth_device_smc911x *dev)
|
||||||
smc911x_reg_write(dev, LAN9118_HW_CFG, LAN9118_HW_CFG_SRST);
|
smc911x_reg_write(dev, LAN9118_HW_CFG, LAN9118_HW_CFG_SRST);
|
||||||
|
|
||||||
timeout = 1000;
|
timeout = 1000;
|
||||||
while (timeout-- && smc911x_reg_read(dev, LAN9118_E2P_CMD) & E2P_CMD_EPC_BUSY)
|
while (timeout-- && smc911x_reg_read(dev, LAN9118_E2P_CMD) & LAN9118_E2P_CMD)
|
||||||
udelay(10);
|
udelay(10);
|
||||||
|
|
||||||
if (timeout < 0)
|
if (timeout < 0)
|
||||||
|
|
@ -186,7 +186,7 @@ static void smc911x_reset(struct eth_device_smc911x *dev)
|
||||||
}
|
}
|
||||||
|
|
||||||
/* Reset the FIFO level and flow control settings */
|
/* Reset the FIFO level and flow control settings */
|
||||||
smc911x_set_mac_csr(dev, LAN9118_FLOW, FLOW_FCPT | LAN9118_FLOW_FCEN);
|
smc911x_set_mac_csr(dev, LAN9118_FLOW, LAN9118_FLOW_FCPT(0xffff) | LAN9118_FLOW_FCEN);
|
||||||
smc911x_reg_write(dev, LAN9118_AFC_CFG, 0x0050287F);
|
smc911x_reg_write(dev, LAN9118_AFC_CFG, 0x0050287F);
|
||||||
|
|
||||||
/* Set to LED outputs */
|
/* Set to LED outputs */
|
||||||
|
|
@ -255,10 +255,10 @@ static void smc911x_phy_configure(struct eth_device_smc911x *dev)
|
||||||
|
|
||||||
smc911x_phy_reset(dev);
|
smc911x_phy_reset(dev);
|
||||||
|
|
||||||
smc911x_eth_phy_write(dev, 1, MII_BMCR, BMCR_RESET);
|
smc911x_eth_phy_write(dev, 1, LAN9118_MII_BMCR, LAN9118_BMCR_RESET);
|
||||||
mdelay(1);
|
mdelay(1);
|
||||||
smc911x_eth_phy_write(dev, 1, MII_ADVERTISE, 0x01e1);
|
smc911x_eth_phy_write(dev, 1, LAN9118_MII_ADVERTISE, 0x01e1);
|
||||||
smc911x_eth_phy_write(dev, 1, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
|
smc911x_eth_phy_write(dev, 1, LAN9118_MII_BMCR, LAN9118_BMCR_ANENABLE | LAN9118_BMCR_ANRESTART);
|
||||||
|
|
||||||
timeout = 5000;
|
timeout = 5000;
|
||||||
do
|
do
|
||||||
|
|
@ -267,10 +267,10 @@ static void smc911x_phy_configure(struct eth_device_smc911x *dev)
|
||||||
if ((timeout--) == 0)
|
if ((timeout--) == 0)
|
||||||
goto err_out;
|
goto err_out;
|
||||||
|
|
||||||
if (smc911x_eth_phy_read(dev, 1, MII_BMSR, &status) != 0)
|
if (smc911x_eth_phy_read(dev, 1, LAN9118_MII_BMSR, &status) != 0)
|
||||||
goto err_out;
|
goto err_out;
|
||||||
}
|
}
|
||||||
while (!(status & BMSR_LSTATUS));
|
while (!(status & LAN9118_BMSR_LSTATUS));
|
||||||
|
|
||||||
return;
|
return;
|
||||||
|
|
||||||
|
|
@ -281,9 +281,9 @@ err_out:
|
||||||
static void smc911x_enable(struct eth_device_smc911x *dev)
|
static void smc911x_enable(struct eth_device_smc911x *dev)
|
||||||
{
|
{
|
||||||
/* Enable TX */
|
/* Enable TX */
|
||||||
smc911x_reg_write(dev, LAN9118_HW_CFG, 8 << 16 | HW_CFG_SF);
|
smc911x_reg_write(dev, LAN9118_HW_CFG, 8 << 16 | LAN9118_HW_CFG_SF);
|
||||||
|
|
||||||
smc911x_reg_write(dev, LAN9118_GPT_CFG, GPT_CFG_TIMER_EN | 10000);
|
smc911x_reg_write(dev, LAN9118_GPT_CFG, LAN9118_GPT_CFG_TIMER_EN | 10000);
|
||||||
|
|
||||||
smc911x_reg_write(dev, LAN9118_TX_CFG, LAN9118_TX_CFG_TX_ON);
|
smc911x_reg_write(dev, LAN9118_TX_CFG, LAN9118_TX_CFG_TX_ON);
|
||||||
|
|
||||||
|
|
@ -291,7 +291,7 @@ static void smc911x_enable(struct eth_device_smc911x *dev)
|
||||||
smc911x_reg_write(dev, LAN9118_RX_CFG, 0);
|
smc911x_reg_write(dev, LAN9118_RX_CFG, 0);
|
||||||
|
|
||||||
smc911x_set_mac_csr(dev, LAN9118_MAC_CR, LAN9118_MAC_CR_TXEN | LAN9118_MAC_CR_RXEN |
|
smc911x_set_mac_csr(dev, LAN9118_MAC_CR, LAN9118_MAC_CR_TXEN | LAN9118_MAC_CR_RXEN |
|
||||||
MAC_CR_HBDIS);
|
LAN9118_MAC_CR_HBDIS);
|
||||||
}
|
}
|
||||||
|
|
||||||
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
|
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
|
||||||
|
|
@ -331,7 +331,7 @@ static void smc911x_isr(int vector, void *param)
|
||||||
|
|
||||||
status = smc911x_reg_read(emac, LAN9118_INT_STS);
|
status = smc911x_reg_read(emac, LAN9118_INT_STS);
|
||||||
|
|
||||||
if (status & INT_STS_RSFL)
|
if (status & LAN9118_INT_STS_RSFL)
|
||||||
{
|
{
|
||||||
eth_device_ready(&emac->parent);
|
eth_device_ready(&emac->parent);
|
||||||
}
|
}
|
||||||
|
|
@ -360,7 +360,7 @@ static rt_err_t smc911x_emac_init(rt_device_t dev)
|
||||||
#if 1
|
#if 1
|
||||||
/* Interrupt on every received packet */
|
/* Interrupt on every received packet */
|
||||||
smc911x_reg_write(emac, LAN9118_FIFO_INT, 0x01 << 8);
|
smc911x_reg_write(emac, LAN9118_FIFO_INT, 0x01 << 8);
|
||||||
smc911x_reg_write(emac, LAN9118_INT_EN, INT_EN_RDFL_EN | LAN9118_INT_RSFL);
|
smc911x_reg_write(emac, LAN9118_INT_EN, LAN9118_INT_EN_RDFL_EN | LAN9118_INT_RSFL);
|
||||||
|
|
||||||
/* enable interrupt */
|
/* enable interrupt */
|
||||||
smc911x_reg_write(emac, LAN9118_IRQ_CFG, LAN9118_IRQ_CFG_IRQ_EN | LAN9118_IRQ_CFG_IRQ_POL | LAN9118_IRQ_CFG_IRQ_TYPE);
|
smc911x_reg_write(emac, LAN9118_IRQ_CFG, LAN9118_IRQ_CFG_IRQ_EN | LAN9118_IRQ_CFG_IRQ_POL | LAN9118_IRQ_CFG_IRQ_TYPE);
|
||||||
|
|
@ -386,11 +386,11 @@ static rt_err_t smc911x_emac_control(rt_device_t dev, int cmd, void *args)
|
||||||
emac = SMC911X_EMAC_DEVICE(dev);
|
emac = SMC911X_EMAC_DEVICE(dev);
|
||||||
RT_ASSERT(emac != RT_NULL);
|
RT_ASSERT(emac != RT_NULL);
|
||||||
|
|
||||||
switch(cmd)
|
switch (cmd)
|
||||||
{
|
{
|
||||||
case NIOCTL_GADDR:
|
case NIOCTL_GADDR:
|
||||||
/* get MAC address */
|
/* get MAC address */
|
||||||
if(args) rt_memcpy(args, emac->enetaddr, 6);
|
if (args) rt_memcpy(args, emac->enetaddr, 6);
|
||||||
else return -RT_ERROR;
|
else return -RT_ERROR;
|
||||||
break;
|
break;
|
||||||
default :
|
default :
|
||||||
|
|
@ -402,7 +402,7 @@ static rt_err_t smc911x_emac_control(rt_device_t dev, int cmd, void *args)
|
||||||
/* Ethernet device interface */
|
/* Ethernet device interface */
|
||||||
/* transmit packet. */
|
/* transmit packet. */
|
||||||
static uint8_t tx_buf[2048];
|
static uint8_t tx_buf[2048];
|
||||||
rt_err_t smc911x_emac_tx(rt_device_t dev, struct pbuf* p)
|
rt_err_t smc911x_emac_tx(rt_device_t dev, struct pbuf *p)
|
||||||
{
|
{
|
||||||
struct eth_device_smc911x *emac;
|
struct eth_device_smc911x *emac;
|
||||||
|
|
||||||
|
|
@ -418,7 +418,7 @@ rt_err_t smc911x_emac_tx(rt_device_t dev, struct pbuf* p)
|
||||||
pbuf_copy_partial(p, tx_buf, p->tot_len, 0);
|
pbuf_copy_partial(p, tx_buf, p->tot_len, 0);
|
||||||
|
|
||||||
/* send it out */
|
/* send it out */
|
||||||
data = (uint32_t*)tx_buf;
|
data = (uint32_t *)tx_buf;
|
||||||
length = p->tot_len;
|
length = p->tot_len;
|
||||||
|
|
||||||
smc911x_reg_write(emac, LAN9118_TXDFIFOP, LAN9118_TXC_A_FS | LAN9118_TXC_A_LS | length);
|
smc911x_reg_write(emac, LAN9118_TXDFIFOP, LAN9118_TXC_A_FS | LAN9118_TXC_A_LS | length);
|
||||||
|
|
@ -431,14 +431,14 @@ rt_err_t smc911x_emac_tx(rt_device_t dev, struct pbuf* p)
|
||||||
}
|
}
|
||||||
|
|
||||||
/* wait for transmission */
|
/* wait for transmission */
|
||||||
while (!((smc911x_reg_read(emac, LAN9118_TX_FIFO_INF) & TX_FIFO_INF_TSUSED) >> 16));
|
while (!(LAN9118_TX_FIFO_INF_TXSUSED(smc911x_reg_read(emac, LAN9118_TX_FIFO_INF))));
|
||||||
|
|
||||||
/* get status. Ignore 'no carrier' error, it has no meaning for
|
/* get status. Ignore 'no carrier' error, it has no meaning for
|
||||||
* full duplex operation
|
* full duplex operation
|
||||||
*/
|
*/
|
||||||
status = smc911x_reg_read(emac, LAN9118_TXSFIFOP) &
|
status = smc911x_reg_read(emac, LAN9118_TXSFIFOP) &
|
||||||
(LAN9118_TXS_LOC | LAN9118_TXS_LCOL | LAN9118_TXS_ECOL |
|
(LAN9118_TXS_LOC | LAN9118_TXS_LCOL | LAN9118_TXS_ECOL |
|
||||||
LAN9118_TXS_ED | TX_STS_UNDERRUN);
|
LAN9118_TXS_ED | LAN9118_TX_STS_UNDERRUN);
|
||||||
|
|
||||||
if (!status) return 0;
|
if (!status) return 0;
|
||||||
|
|
||||||
|
|
@ -447,7 +447,7 @@ rt_err_t smc911x_emac_tx(rt_device_t dev, struct pbuf* p)
|
||||||
status & LAN9118_TXS_LCOL ? "LAN9118_TXS_LCOL " : "",
|
status & LAN9118_TXS_LCOL ? "LAN9118_TXS_LCOL " : "",
|
||||||
status & LAN9118_TXS_ECOL ? "LAN9118_TXS_ECOL " : "",
|
status & LAN9118_TXS_ECOL ? "LAN9118_TXS_ECOL " : "",
|
||||||
status & LAN9118_TXS_ED ? "LAN9118_TXS_ED " : "",
|
status & LAN9118_TXS_ED ? "LAN9118_TXS_ED " : "",
|
||||||
status & TX_STS_UNDERRUN ? "TX_STS_UNDERRUN" : "");
|
status & LAN9118_TX_STS_UNDERRUN ? "LAN9118_TX_STS_UNDERRUN" : "");
|
||||||
|
|
||||||
return -RT_EIO;
|
return -RT_EIO;
|
||||||
}
|
}
|
||||||
|
|
@ -455,14 +455,14 @@ rt_err_t smc911x_emac_tx(rt_device_t dev, struct pbuf* p)
|
||||||
/* reception packet. */
|
/* reception packet. */
|
||||||
struct pbuf *smc911x_emac_rx(rt_device_t dev)
|
struct pbuf *smc911x_emac_rx(rt_device_t dev)
|
||||||
{
|
{
|
||||||
struct pbuf* p = RT_NULL;
|
struct pbuf *p = RT_NULL;
|
||||||
struct eth_device_smc911x *emac;
|
struct eth_device_smc911x *emac;
|
||||||
|
|
||||||
emac = SMC911X_EMAC_DEVICE(dev);
|
emac = SMC911X_EMAC_DEVICE(dev);
|
||||||
RT_ASSERT(emac != RT_NULL);
|
RT_ASSERT(emac != RT_NULL);
|
||||||
|
|
||||||
/* take the emac buffer to the pbuf */
|
/* take the emac buffer to the pbuf */
|
||||||
if ((smc911x_reg_read(emac, LAN9118_RX_FIFO_INF) & RX_FIFO_INF_RXSUSED) >> 16)
|
if (LAN9118_RX_FIFO_INF_RXSUSED(smc911x_reg_read(emac, LAN9118_RX_FIFO_INF)))
|
||||||
{
|
{
|
||||||
uint32_t status;
|
uint32_t status;
|
||||||
uint32_t pktlen, tmplen;
|
uint32_t pktlen, tmplen;
|
||||||
|
|
@ -470,7 +470,7 @@ struct pbuf *smc911x_emac_rx(rt_device_t dev)
|
||||||
status = smc911x_reg_read(emac, LAN9118_RXSFIFOP);
|
status = smc911x_reg_read(emac, LAN9118_RXSFIFOP);
|
||||||
|
|
||||||
/* get frame length */
|
/* get frame length */
|
||||||
pktlen = (status & RX_STS_PKT_LEN) >> 16;
|
pktlen = (status & LAN9118_RX_STS_PKT_LEN) >> 16;
|
||||||
|
|
||||||
smc911x_reg_write(emac, LAN9118_RX_CFG, 0);
|
smc911x_reg_write(emac, LAN9118_RX_CFG, 0);
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,4 +1,15 @@
|
||||||
/* $NetBSD: lan9118reg.h,v 1.3 2010/09/27 12:29:03 kiyohara Exp $ */
|
/*
|
||||||
|
* Copyright (c) 2006-2021, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2021-04-21
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
/* $NetBSD: lan9118reg.h,v 1.3 2010/09/27 12:29:03 kiyohara Exp $ */
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2008 KIYOHARA Takashi
|
* Copyright (c) 2008 KIYOHARA Takashi
|
||||||
* All rights reserved.
|
* All rights reserved.
|
||||||
|
|
@ -28,277 +39,304 @@
|
||||||
#ifndef _LAN9118REG_H_
|
#ifndef _LAN9118REG_H_
|
||||||
#define _LAN9118REG_H_
|
#define _LAN9118REG_H_
|
||||||
|
|
||||||
#define LAN9118_IOSIZE 0x100
|
|
||||||
|
|
||||||
#define LAN9118_ID_9115 0x0115
|
#define CONFIG_SMC911X_32_BIT
|
||||||
#define LAN9118_ID_9116 0x0116
|
|
||||||
#define LAN9118_ID_9117 0x0117
|
|
||||||
#define LAN9118_ID_9118 0x0118
|
|
||||||
#define LAN9218_ID_9215 0x115a
|
|
||||||
#define LAN9218_ID_9217 0x117a
|
|
||||||
#define LAN9218_ID_9218 0x118a
|
|
||||||
|
|
||||||
#define LAN9210_ID_9210 0x9210
|
#define LAN9118_IOSIZE 0x100
|
||||||
#define LAN9210_ID_9211 0x9211
|
|
||||||
#define LAN9220_ID_9220 0x9220
|
|
||||||
#define LAN9220_ID_9221 0x9221
|
|
||||||
|
|
||||||
#define IS_LAN9118(id) ((id) >= LAN9118_ID_9115 && (id) <= LAN9118_ID_9118)
|
#define LAN9118_ID_89218 0x218a
|
||||||
#define IS_LAN9218(id) ((id) >= LAN9218_ID_9215 && (id) <= LAN9218_ID_9218)
|
#define LAN9118_ID_9115 0x0115
|
||||||
|
#define LAN9118_ID_9116 0x0116
|
||||||
|
#define LAN9118_ID_9117 0x0117
|
||||||
|
#define LAN9118_ID_9118 0x0118
|
||||||
|
#define LAN9218_ID_9215 0x115a
|
||||||
|
#define LAN9218_ID_9216 0x116a
|
||||||
|
#define LAN9218_ID_9217 0x117a
|
||||||
|
#define LAN9218_ID_9218 0x118a
|
||||||
|
|
||||||
#define LAN9118_IPHY_ADDR 0x01 /* Internal PHY Address */
|
#define LAN9210_ID_9210 0x9210
|
||||||
|
#define LAN9210_ID_9211 0x9211
|
||||||
|
#define LAN9220_ID_9220 0x9220
|
||||||
|
#define LAN9220_ID_9221 0x9221
|
||||||
|
|
||||||
|
#define IS_LAN9118(id) ((id) >= LAN9118_ID_9115 && (id) <= LAN9118_ID_9118)
|
||||||
|
#define IS_LAN9218(id) ((id) >= LAN9218_ID_9215 && (id) <= LAN9218_ID_9218)
|
||||||
|
|
||||||
|
#define LAN9118_IPHY_ADDR 0x01 /* Internal PHY Address */
|
||||||
|
|
||||||
|
|
||||||
#define LAN9118_RXDFIFOP 0x00 /* RX Data FIFO Port */
|
#define LAN9118_RXDFIFOP 0x00 /* RX Data FIFO Port */
|
||||||
#define LAN9118_RXDFIFOAP 0x04 /* RX Data FIFO Alias Ports */
|
#define LAN9118_RXDFIFOAP 0x04 /* RX Data FIFO Alias Ports */
|
||||||
#define LAN9118_TXDFIFOP 0x20 /* TX Data FIFO Port */
|
#define LAN9118_TXDFIFOP 0x20 /* TX Data FIFO Port */
|
||||||
#define LAN9118_TXDFIFOAP 0x24 /* TX Data FIFO Alias Ports */
|
#define LAN9118_TXDFIFOAP 0x24 /* TX Data FIFO Alias Ports */
|
||||||
#define LAN9118_RXSFIFOP 0x40 /* RX Status FIFO Port */
|
#define LAN9118_RXSFIFOP 0x40 /* RX Status FIFO Port */
|
||||||
#define LAN9118_RXSFIFOPEEK 0x44 /* RX Status FIFO PEEK */
|
#define LAN9118_RXSFIFOPEEK 0x44 /* RX Status FIFO PEEK */
|
||||||
#define LAN9118_TXSFIFOP 0x48 /* TX Status FIFO Port */
|
#define LAN9118_TXSFIFOP 0x48 /* TX Status FIFO Port */
|
||||||
#define LAN9118_TXSFIFOPEEK 0x4c /* TX Status FIFO PEEK */
|
#define LAN9118_TXSFIFOPEEK 0x4c /* TX Status FIFO PEEK */
|
||||||
|
|
||||||
/* System Control and Status Registers */
|
/* System Control and Status Registers */
|
||||||
#define LAN9118_ID_REV 0x50 /* Chip ID and Revision */
|
#define LAN9118_ID_REV 0x50 /* Chip ID and Revision */
|
||||||
#define LAN9118_ID_REV_ID(x) (((x) >> 16) & 0xffff)
|
#define LAN9118_ID_REV_ID(x) (((x) >> 16) & 0xffff)
|
||||||
#define LAN9118_ID_REV_REV(x) ((x) & 0xffff)
|
#define LAN9118_ID_REV_REV(x) ((x) & 0xffff)
|
||||||
#define LAN9118_IRQ_CFG 0x54 /* Main Interrupt Configuration */
|
#define LAN9118_IRQ_CFG 0x54 /* Main Interrupt Configuration */
|
||||||
#define LAN9118_IRQ_CFG_INT_DEAS(t) ((t) << 24) /* Intr Deassert Interval */
|
#define LAN9118_IRQ_CFG_INT_DEAS(t) ((t) << 24) /* Intr Deassert Interval */
|
||||||
#define LAN9118_IRQ_CFG_INT_DEAS_CLR (1 << 14) /* Intr Deass Intrval clr */
|
#define LAN9118_IRQ_CFG_INT_DEAS_CLR (1 << 14) /* Intr Deass Intrval clr */
|
||||||
#define LAN9118_IRQ_CFG_INT_DEAS_STS (1 << 13) /* Intr Deassert Status */
|
#define LAN9118_IRQ_CFG_INT_DEAS_STS (1 << 13) /* Intr Deassert Status */
|
||||||
#define LAN9118_IRQ_CFG_IRQ_INT (1 << 12) /* Master Interrupt */
|
#define LAN9118_IRQ_CFG_IRQ_INT (1 << 12) /* Master Interrupt */
|
||||||
#define LAN9118_IRQ_CFG_IRQ_EN (1 << 8) /* IRQ Enable */
|
#define LAN9118_IRQ_CFG_IRQ_EN (1 << 8) /* IRQ Enable */
|
||||||
#define LAN9118_IRQ_CFG_IRQ_POL (1 << 4) /* IRQ Polarity */
|
#define LAN9118_IRQ_CFG_IRQ_POL (1 << 4) /* IRQ Polarity */
|
||||||
#define LAN9118_IRQ_CFG_IRQ_TYPE (1 << 0) /* IRQ Buffer Type */
|
#define LAN9118_IRQ_CFG_IRQ_TYPE (1 << 0) /* IRQ Buffer Type */
|
||||||
#define LAN9118_INT_STS 0x58 /* Interrupt Status */
|
#define LAN9118_INT_STS 0x58 /* Interrupt Status */
|
||||||
#define LAN9118_INT_EN 0x5c /* Interrupt Enable Register */
|
#define LAN9118_INT_EN 0x5c /* Interrupt Enable Register */
|
||||||
#define LAN9118_INT_SW_INT (1 << 31) /* Software Interrupt */
|
#define LAN9118_INT_SW_INT (1 << 31) /* Software Interrupt */
|
||||||
#define LAN9118_INT_TXSTOP_INT (1 << 25) /* TX Stopped */
|
#define LAN9118_INT_TXSTOP_INT (1 << 25) /* TX Stopped */
|
||||||
#define LAN9118_INT_RXSTOP_INT (1 << 24) /* RX Stopped */
|
#define LAN9118_INT_RXSTOP_INT (1 << 24) /* RX Stopped */
|
||||||
#define LAN9118_INT_RXDFH_INT (1 << 23) /* RX Drppd Frm Cnt Halfway */
|
#define LAN9118_INT_RXDFH_INT (1 << 23) /* RX Drppd Frm Cnt Halfway */
|
||||||
#define LAN9118_INT_TX_IOC (1 << 21) /* TX IOC Interrupt */
|
#define LAN9118_INT_TX_IOC (1 << 21) /* TX IOC Interrupt */
|
||||||
#define LAN9118_INT_RXD_INT (1 << 20) /* RX DMA Interrupt */
|
#define LAN9118_INT_RXD_INT (1 << 20) /* RX DMA Interrupt */
|
||||||
#define LAN9118_INT_GPT_INT (1 << 19) /* GP Timer */
|
#define LAN9118_INT_GPT_INT (1 << 19) /* GP Timer */
|
||||||
#define LAN9118_INT_PHY_INT (1 << 18) /* PHY */
|
#define LAN9118_INT_PHY_INT (1 << 18) /* PHY */
|
||||||
#define LAN9118_INT_PME_INT (1 << 17) /* Power Management Event */
|
#define LAN9118_INT_PME_INT (1 << 17) /* Power Management Event */
|
||||||
#define LAN9118_INT_TXSO (1 << 16) /* TX Status FIFO Overflow */
|
#define LAN9118_INT_TXSO (1 << 16) /* TX Status FIFO Overflow */
|
||||||
#define LAN9118_INT_RWT (1 << 15) /* Rcv Watchdog Time-out */
|
#define LAN9118_INT_RWT (1 << 15) /* Rcv Watchdog Time-out */
|
||||||
#define LAN9118_INT_RXE (1 << 14) /* Receive Error */
|
#define LAN9118_INT_RXE (1 << 14) /* Receive Error */
|
||||||
#define LAN9118_INT_TXE (1 << 13) /* Transmitter Error */
|
#define LAN9118_INT_TXE (1 << 13) /* Transmitter Error */
|
||||||
#define LAN9118_INT_TDFO (1 << 10) /* TX Data FIFO Overrun */
|
#define LAN9118_INT_TDFO (1 << 10) /* TX Data FIFO Overrun */
|
||||||
#define LAN9118_INT_TDFA (1 << 9) /* TX Data FIFO Available */
|
#define LAN9118_INT_TDFA (1 << 9) /* TX Data FIFO Available */
|
||||||
#define LAN9118_INT_TSFF (1 << 8) /* TX Status FIFO Full */
|
#define LAN9118_INT_TSFF (1 << 8) /* TX Status FIFO Full */
|
||||||
#define LAN9118_INT_TSFL (1 << 7) /* TX Status FIFO Level */
|
#define LAN9118_INT_TSFL (1 << 7) /* TX Status FIFO Level */
|
||||||
#define LAN9118_INT_RXDF_INT (1 << 6) /* RX Dropped Frame Intr */
|
#define LAN9118_INT_RXDF_INT (1 << 6) /* RX Dropped Frame Intr */
|
||||||
#define LAN9118_INT_RSFF (1 << 4) /* RX Status FIFO Full */
|
#define LAN9118_INT_RSFF (1 << 4) /* RX Status FIFO Full */
|
||||||
#define LAN9118_INT_RSFL (1 << 3) /* RX Status FIFO Level */
|
#define LAN9118_INT_RSFL (1 << 3) /* RX Status FIFO Level */
|
||||||
#define LAN9118_INT_GPIOX_INT(x) (1 << (x)) /* GPIO[2:0] */
|
#define LAN9118_INT_GPIOX_INT(x) (1 << (x)) /* GPIO[2:0] */
|
||||||
/* 0x60 Reserved for future use */
|
/* 0x60 Reserved for future use */
|
||||||
#define LAN9118_BYTE_TEST 0x64 /* Read-only byte order testing reg */
|
#define LAN9118_BYTE_TEST 0x64 /* Read-only byte order testing reg */
|
||||||
#define LAN9118_BYTE_TEST_VALUE 0x87654321
|
#define LAN9118_BYTE_TEST_VALUE 0x87654321
|
||||||
#define LAN9118_FIFO_INT 0x68 /* FIFO Level Interrupt */
|
#define LAN9118_FIFO_INT 0x68 /* FIFO Level Interrupt */
|
||||||
#define LAN9118_FIFO_INT_TXDAL(x) ((x) << 24) /* TX Data Available Lvl */
|
#define LAN9118_FIFO_INT_TXDAL(x) ((x) << 24) /* TX Data Available Lvl */
|
||||||
#define LAN9118_FIFO_INT_TXSL(x) ((x) << 16) /* TX Status Level */
|
#define LAN9118_FIFO_INT_TXSL(x) ((x) << 16) /* TX Status Level */
|
||||||
#define LAN9118_FIFO_INT_RXSL(x) ((x) << 0) /* RX Status Level */
|
#define LAN9118_FIFO_INT_RXSL(x) ((x) << 0) /* RX Status Level */
|
||||||
#define LAN9118_RX_CFG 0x6c /* Receive Configuration */
|
#define LAN9118_RX_CFG 0x6c /* Receive Configuration */
|
||||||
#define LAN9118_RX_CFG_RXEA_4B (0 << 30) /* RX End Alignment: 4 Byte */
|
#define LAN9118_RX_CFG_RXEA_4B (0 << 30) /* RX End Alignment: 4 Byte */
|
||||||
#define LAN9118_RX_CFG_RXEA_16B (1 << 30) /* 16 Byte */
|
#define LAN9118_RX_CFG_RXEA_16B (1 << 30) /* 16 Byte */
|
||||||
#define LAN9118_RX_CFG_RXEA_32B (2 << 30) /* 32 Byte */
|
#define LAN9118_RX_CFG_RXEA_32B (2 << 30) /* 32 Byte */
|
||||||
#define LAN9118_RX_CFG_RX_DMA_CNT(x) ((x) << 16) /* RX DMA Count */
|
#define LAN9118_RX_CFG_RX_DMA_CNT(x) ((x) << 16) /* RX DMA Count */
|
||||||
#define LAN9118_RX_CFG_RX_DUMP (1 << 15) /* Force RX Discard */
|
#define LAN9118_RX_CFG_RX_DUMP (1 << 15) /* Force RX Discard */
|
||||||
#define LAN9118_RX_CFG_RXDOFF(x) ((x) << 8) /* RX Data Offset */
|
#define LAN9118_RX_CFG_RXDOFF(x) ((x) << 8) /* RX Data Offset */
|
||||||
#define LAN9118_TX_CFG 0x70 /* Transmit Configuration */
|
#define LAN9118_TX_CFG 0x70 /* Transmit Configuration */
|
||||||
#define LAN9118_TX_CFG_TXS_DUMP (1 << 15) /* Force TX Status Discard */
|
#define LAN9118_TX_CFG_TXS_DUMP (1 << 15) /* Force TX Status Discard */
|
||||||
#define LAN9118_TX_CFG_TXD_DUMP (1 << 14) /* Force TX Data Discard */
|
#define LAN9118_TX_CFG_TXD_DUMP (1 << 14) /* Force TX Data Discard */
|
||||||
#define LAN9118_TX_CFG_TXSAO (1 << 2) /* TX Status Allow Overrun */
|
#define LAN9118_TX_CFG_TXSAO (1 << 2) /* TX Status Allow Overrun */
|
||||||
#define LAN9118_TX_CFG_TX_ON (1 << 1) /* Transmitter Enable */
|
#define LAN9118_TX_CFG_TX_ON (1 << 1) /* Transmitter Enable */
|
||||||
#define LAN9118_TX_CFG_STOP_TX (1 << 0) /* Stop Transmitter */
|
#define LAN9118_TX_CFG_STOP_TX (1 << 0) /* Stop Transmitter */
|
||||||
#define LAN9118_HW_CFG 0x74 /* Hardware Configuration */
|
#define LAN9118_HW_CFG 0x74 /* Hardware Configuration */
|
||||||
#define LAN9118_HW_CFG_MBO (1 << 20)/* Must Be One */
|
#define LAN9118_HW_CFG_MBO (1 << 20)/* Must Be One */
|
||||||
#define LAN9118_HW_CFG_TX_FIF_MASK (0xf << 16) /* TX FIFO Size */
|
#define LAN9118_HW_CFG_TX_FIF_MASK (0xf << 16) /* TX FIFO Size */
|
||||||
#define LAN9118_HW_CFG_TX_FIF_SZ(sz) ((sz) << 16)
|
#define LAN9118_HW_CFG_TX_FIF_SZ(sz) ((sz) << 16)
|
||||||
#define LAN9118_HW_CFG_PHY_CLK_SEL_MASK (3 << 5) /* PHY Clock Select */
|
#define LAN9118_HW_CFG_PHY_CLK_SEL_MASK (3 << 5) /* PHY Clock Select */
|
||||||
#define LAN9118_HW_CFG_PHY_CLK_SEL_IPHY (0 << 5) /* Internal PHY */
|
#define LAN9118_HW_CFG_PHY_CLK_SEL_IPHY (0 << 5) /* Internal PHY */
|
||||||
#define LAN9118_HW_CFG_PHY_CLK_SEL_EMII (1 << 5) /* External MII Port */
|
#define LAN9118_HW_CFG_PHY_CLK_SEL_EMII (1 << 5) /* External MII Port */
|
||||||
#define LAN9118_HW_CFG_PHY_CLK_SEL_CD (2 << 5) /* Clock Disabled */
|
#define LAN9118_HW_CFG_PHY_CLK_SEL_CD (2 << 5) /* Clock Disabled */
|
||||||
#define LAN9118_HW_CFG_SMI_SEL (1 << 4) /* Serial Mgmt Interface Sel */
|
#define LAN9118_HW_CFG_SMI_SEL (1 << 4) /* Serial Mgmt Interface Sel */
|
||||||
#define LAN9118_HW_CFG_EXT_PHY_DET (1 << 3) /* External PHY Detect */
|
#define LAN9118_HW_CFG_EXT_PHY_DET (1 << 3) /* External PHY Detect */
|
||||||
#define LAN9118_HW_CFG_EXT_PHY_EN (1 << 2) /* External PHY Enable */
|
#define LAN9118_HW_CFG_EXT_PHY_EN (1 << 2) /* External PHY Enable */
|
||||||
#define LAN9118_HW_CFG_SRST_TO (1 << 1) /* Soft Reset Timeout */
|
#define LAN9118_HW_CFG_SRST_TO (1 << 1) /* Soft Reset Timeout */
|
||||||
#define LAN9118_HW_CFG_SRST (1 << 0) /* Soft Reset */
|
#define LAN9118_HW_CFG_SRST (1 << 0) /* Soft Reset */
|
||||||
#define LAN9118_RX_DP_CTL 0x78 /* RX Datapath Control */
|
#define LAN9118_RX_DP_CTL 0x78 /* RX Datapath Control */
|
||||||
#define LAN9118_RX_DP_CTL_RX_FFWD (1 << 31)/* RX Data FIFO Fast Forward */
|
#define LAN9118_RX_DP_CTL_RX_FFWD (1 << 31)/* RX Data FIFO Fast Forward */
|
||||||
#define LAN9118_RX_FIFO_INF 0x7c /* Receive FIFO Information */
|
#define LAN9118_RX_FIFO_INF 0x7c /* Receive FIFO Information */
|
||||||
#define LAN9118_RX_FIFO_INF_RXSUSED(x) (((x) >> 16) & 0xff) /*Sts Used Space*/
|
#define LAN9118_RX_FIFO_INF_RXSUSED(x) (((x) >> 16) & 0xff) /*Sts Used Space*/
|
||||||
#define LAN9118_RX_FIFO_INF_RXDUSED(x) ((x) & 0xffff) /*Data FIFO Used Space*/
|
#define LAN9118_RX_FIFO_INF_RXDUSED(x) ((x) & 0xffff) /*Data FIFO Used Space*/
|
||||||
#define LAN9118_TX_FIFO_INF 0x80 /* Transmit FIFO Information */
|
#define LAN9118_TX_FIFO_INF 0x80 /* Transmit FIFO Information */
|
||||||
#define LAN9118_TX_FIFO_INF_TXSUSED(x) (((x) >> 16) & 0xff) /*Sts Used Space*/
|
#define LAN9118_TX_FIFO_INF_TXSUSED(x) (((x) >> 16) & 0xff) /*Sts Used Space*/
|
||||||
#define LAN9118_TX_FIFO_INF_TDFREE(x) ((x) & 0xffff) /*Data FIFO Free Space*/
|
#define LAN9118_TX_FIFO_INF_TDFREE(x) ((x) & 0xffff) /*Data FIFO Free Space*/
|
||||||
#define LAN9118_PMT_CTRL 0x84 /* Power Management Control */
|
#define LAN9118_PMT_CTRL 0x84 /* Power Management Control */
|
||||||
#define LAN9118_PMT_CTRL_PM_MODE_MASK (3 << 12)
|
#define LAN9118_PMT_CTRL_PM_MODE_MASK (3 << 12)
|
||||||
#define LAN9118_PMT_CTRL_PM_MODE_D0 (0 << 12)
|
#define LAN9118_PMT_CTRL_PM_MODE_D0 (0 << 12)
|
||||||
#define LAN9118_PMT_CTRL_PM_MODE_D1 (1 << 12)
|
#define LAN9118_PMT_CTRL_PM_MODE_D1 (1 << 12)
|
||||||
#define LAN9118_PMT_CTRL_PM_MODE_D2 (2 << 12)
|
#define LAN9118_PMT_CTRL_PM_MODE_D2 (2 << 12)
|
||||||
#define LAN9118_PMT_CTRL_PHY_RST (1 << 10) /* PHY Reset */
|
#define LAN9118_PMT_CTRL_PHY_RST (1 << 10) /* PHY Reset */
|
||||||
#define LAN9118_PMT_CTRL_WOL_EN (1 << 9) /* Wake-On-LAN Enable */
|
#define LAN9118_PMT_CTRL_WOL_EN (1 << 9) /* Wake-On-LAN Enable */
|
||||||
#define LAN9118_PMT_CTRL_ED_EN (1 << 8) /* Energy-Detect Enable */
|
#define LAN9118_PMT_CTRL_ED_EN (1 << 8) /* Energy-Detect Enable */
|
||||||
#define LAN9118_PMT_CTRL_PME_TYPE (1 << 6) /* PME Buffer Type */
|
#define LAN9118_PMT_CTRL_PME_TYPE (1 << 6) /* PME Buffer Type */
|
||||||
#define LAN9118_PMT_CTRL_WUPS_NWUED (0 << 4) /* WAKE-UP Status: No Event */
|
#define LAN9118_PMT_CTRL_WUPS_NWUED (0 << 4) /* WAKE-UP Status: No Event */
|
||||||
#define LAN9118_PMT_CTRL_WUPS_ED (1 << 4) /* WAKE-UP Status: Energy */
|
#define LAN9118_PMT_CTRL_WUPS_ED (1 << 4) /* WAKE-UP Status: Energy */
|
||||||
#define LAN9118_PMT_CTRL_WUPS_WUD (2 << 4) /* WAKE-UP Status: Wake-up */
|
#define LAN9118_PMT_CTRL_WUPS_WUD (2 << 4) /* WAKE-UP Status: Wake-up */
|
||||||
#define LAN9118_PMT_CTRL_PME_IND (1 << 3) /* PME indication */
|
#define LAN9118_PMT_CTRL_PME_IND (1 << 3) /* PME indication */
|
||||||
#define LAN9118_PMT_CTRL_PME_POL (1 << 2) /* PME Polarity */
|
#define LAN9118_PMT_CTRL_PME_POL (1 << 2) /* PME Polarity */
|
||||||
#define LAN9118_PMT_CTRL_PME_EN (1 << 1) /* PME Enable */
|
#define LAN9118_PMT_CTRL_PME_EN (1 << 1) /* PME Enable */
|
||||||
#define LAN9118_PMT_CTRL_READY (1 << 0) /* Device Ready */
|
#define LAN9118_PMT_CTRL_READY (1 << 0) /* Device Ready */
|
||||||
#define LAN9118_GPIO_CFG 0x88 /* General Purpose IO Configuration */
|
#define LAN9118_GPIO_CFG 0x88 /* General Purpose IO Configuration */
|
||||||
#define LAN9118_GPIO_CFG_LEDX_EN(x) (1 << ((x) + 28)) /* LED[3:1] enable */
|
#define LAN9118_GPIO_CFG_LEDX_EN(x) (1 << ((x) + 28)) /* LED[3:1] enable */
|
||||||
#define LAN9118_GPIO_CFG_GPIO_INT_POL(p) (1 << ((p) + 24)) /* Intr Polarity */
|
#define LAN9118_GPIO_CFG_GPIO_INT_POL(p) (1 << ((p) + 24)) /* Intr Polarity */
|
||||||
#define LAN9118_GPIO_CFG_EEPR_EN (7 << 20) /* EEPROM Enable */
|
#define LAN9118_GPIO_CFG_EEPR_EN (7 << 20) /* EEPROM Enable */
|
||||||
#define LAN9118_GPIO_CFG_GPIOBUFN(n) (1 << ((n) + 16)) /* Buffer Type */
|
#define LAN9118_GPIO_CFG_GPIOBUFN(n) (1 << ((n) + 16)) /* Buffer Type */
|
||||||
#define LAN9118_GPIO_CFG_GPDIRN(n) (1 << ((n) + 8)) /* Direction */
|
#define LAN9118_GPIO_CFG_GPDIRN(n) (1 << ((n) + 8)) /* Direction */
|
||||||
#define LAN9118_GPIO_CFG_GPODN(n) (1 << (n)) /* GPIO Data (3,4 is WO) */
|
#define LAN9118_GPIO_CFG_GPODN(n) (1 << (n)) /* GPIO Data (3,4 is WO) */
|
||||||
#define LAN9118_GPT_CFG 0x8c /* General Purpose Timer Config */
|
#define LAN9118_GPT_CFG 0x8c /* General Purpose Timer Config */
|
||||||
#define LAN9118_GPT_CNT 0x90 /* General Purpose Timer Count */
|
#define LAN9118_GPT_CNT 0x90 /* General Purpose Timer Count */
|
||||||
/* 0x94 Reserved for future use */
|
/* 0x94 Reserved for future use */
|
||||||
#define LAN9118_WORD_SWAP 0x98 /* WORD SWAP Register */
|
#define LAN9118_WORD_SWAP 0x98 /* WORD SWAP Register */
|
||||||
#define LAN9118_FREE_RUN 0x9c /* Free Run Counter */
|
#define LAN9118_FREE_RUN 0x9c /* Free Run Counter */
|
||||||
#define LAN9118_RX_DROP 0xa0 /* RX Drop Frame Counter */
|
#define LAN9118_RX_DROP 0xa0 /* RX Drop Frame Counter */
|
||||||
#define LAN9118_MAC_CSR_CMD 0xa4 /* MAC CSR Synchronizer Command */
|
#define LAN9118_MAC_CSR_CMD 0xa4 /* MAC CSR Synchronizer Command */
|
||||||
#define LAN9118_MAC_CSR_CMD_BUSY (1 << 31)
|
#define LAN9118_MAC_CSR_CMD_BUSY (1 << 31)
|
||||||
#define LAN9118_MAC_CSR_CMD_W (0 << 30)
|
#define LAN9118_MAC_CSR_CMD_W (0 << 30)
|
||||||
#define LAN9118_MAC_CSR_CMD_R (1 << 30)
|
#define LAN9118_MAC_CSR_CMD_R (1 << 30)
|
||||||
#define LAN9118_MAC_CSR_CMD_ADDRESS(a) ((a) & 0xff)
|
#define LAN9118_MAC_CSR_CMD_ADDRESS(a) ((a) & 0xff)
|
||||||
#define LAN9118_MAC_CSR_DATA 0xa8 /* MAC CSR Synchronizer Data */
|
#define LAN9118_MAC_CSR_DATA 0xa8 /* MAC CSR Synchronizer Data */
|
||||||
#define LAN9118_AFC_CFG 0xac /* Automatic Flow Control Config */
|
#define LAN9118_AFC_CFG 0xac /* Automatic Flow Control Config */
|
||||||
#define LAN9118_AFC_CFG_AFC_HI(x) ((x) << 16)
|
#define LAN9118_AFC_CFG_AFC_HI(x) ((x) << 16)
|
||||||
#define LAN9118_AFC_CFG_AFC_LO(x) ((x) << 8)
|
#define LAN9118_AFC_CFG_AFC_LO(x) ((x) << 8)
|
||||||
#define LAN9118_AFC_CFG_BACK_DUR(x) ((x) << 4)
|
#define LAN9118_AFC_CFG_BACK_DUR(x) ((x) << 4)
|
||||||
#define LAN9118_AFC_CFG_FCMULT (1 << 3) /* Flow Control on Multicast */
|
#define LAN9118_AFC_CFG_FCMULT (1 << 3) /* Flow Control on Multicast */
|
||||||
#define LAN9118_AFC_CFG_FCBRD (1 << 2) /* Flow Control on Broadcast */
|
#define LAN9118_AFC_CFG_FCBRD (1 << 2) /* Flow Control on Broadcast */
|
||||||
#define LAN9118_AFC_CFG_FCADD (1 << 1) /* Flow Control on Addr Dec */
|
#define LAN9118_AFC_CFG_FCADD (1 << 1) /* Flow Control on Addr Dec */
|
||||||
#define LAN9118_AFC_CFG_FCANY (1 << 0) /* Flow Control on Any Frame */
|
#define LAN9118_AFC_CFG_FCANY (1 << 0) /* Flow Control on Any Frame */
|
||||||
#define LAN9118_E2P_CMD 0xb0 /* EEPROM command */
|
#define LAN9118_E2P_CMD 0xb0 /* EEPROM command */
|
||||||
#define LAN9118_E2P_CMD_EPCB (1 << 31) /* EPC Busy */
|
#define LAN9118_E2P_CMD_EPCB (1 << 31) /* EPC Busy */
|
||||||
#define LAN9118_E2P_CMD_EPCC_READ (0 << 28) /* EPC Command: READ */
|
#define LAN9118_E2P_CMD_EPCC_READ (0 << 28) /* EPC Command: READ */
|
||||||
#define LAN9118_E2P_CMD_EPCC_EWDS (1 << 28) /* EWDS */
|
#define LAN9118_E2P_CMD_EPCC_EWDS (1 << 28) /* EWDS */
|
||||||
#define LAN9118_E2P_CMD_EPCC_EWEN (2 << 28) /* EWEN */
|
#define LAN9118_E2P_CMD_EPCC_EWEN (2 << 28) /* EWEN */
|
||||||
#define LAN9118_E2P_CMD_EPCC_WRITE (3 << 28) /* WRITE */
|
#define LAN9118_E2P_CMD_EPCC_WRITE (3 << 28) /* WRITE */
|
||||||
#define LAN9118_E2P_CMD_EPCC_WRAL (4 << 28) /* WRAL */
|
#define LAN9118_E2P_CMD_EPCC_WRAL (4 << 28) /* WRAL */
|
||||||
#define LAN9118_E2P_CMD_EPCC_ERASE (5 << 28) /* ERASE */
|
#define LAN9118_E2P_CMD_EPCC_ERASE (5 << 28) /* ERASE */
|
||||||
#define LAN9118_E2P_CMD_EPCC_ERAL (6 << 28) /* ERAL */
|
#define LAN9118_E2P_CMD_EPCC_ERAL (6 << 28) /* ERAL */
|
||||||
#define LAN9118_E2P_CMD_EPCC_RELOAD (7 << 28) /* Reload */
|
#define LAN9118_E2P_CMD_EPCC_RELOAD (7 << 28) /* Reload */
|
||||||
#define LAN9118_E2P_CMD_EPCTO (1 << 9) /* EPC Time-out */
|
#define LAN9118_E2P_CMD_EPCTO (1 << 9) /* EPC Time-out */
|
||||||
#define LAN9118_E2P_CMD_MACAL (1 << 8) /* MAC Address Loaded */
|
#define LAN9118_E2P_CMD_MACAL (1 << 8) /* MAC Address Loaded */
|
||||||
#define LAN9118_E2P_CMD_EPCA(a) ((a) & 0xff) /* EPC Address */
|
#define LAN9118_E2P_CMD_EPCA(a) ((a) & 0xff) /* EPC Address */
|
||||||
#define LAN9118_E2P_DATA 0xb4 /* EEPROM Data */
|
#define LAN9118_E2P_DATA 0xb4 /* EEPROM Data */
|
||||||
/* 0xb8 - 0xfc Reserved for future use */
|
/* 0xb8 - 0xfc Reserved for future use */
|
||||||
|
|
||||||
/* MAC Control and Status Registers */
|
/* MAC Control and Status Registers */
|
||||||
#define LAN9118_MAC_CR 0x1 /* MAC Control Register */
|
#define LAN9118_MAC_CR 0x1 /* MAC Control Register */
|
||||||
#define LAN9118_MAC_CR_RXALL (1 << 31) /* Receive All Mode */
|
#define LAN9118_MAC_CR_RXALL (1 << 31) /* Receive All Mode */
|
||||||
#define LAN9118_MAC_CR_RCVOWN (1 << 23) /* Disable Receive Own */
|
#define LAN9118_MAC_CR_RCVOWN (1 << 23) /* Disable Receive Own */
|
||||||
#define LAN9118_MAC_CR_LOOPBK (1 << 21) /* Loopback operation Mode */
|
#define LAN9118_MAC_CR_LOOPBK (1 << 21) /* Loopback operation Mode */
|
||||||
#define LAN9118_MAC_CR_FDPX (1 << 20) /* Full Duplex Mode */
|
#define LAN9118_MAC_CR_FDPX (1 << 20) /* Full Duplex Mode */
|
||||||
#define LAN9118_MAC_CR_MCPAS (1 << 19) /* Pass All Multicast */
|
#define LAN9118_MAC_CR_MCPAS (1 << 19) /* Pass All Multicast */
|
||||||
#define LAN9118_MAC_CR_PRMS (1 << 18) /* Promiscuous Mode */
|
#define LAN9118_MAC_CR_PRMS (1 << 18) /* Promiscuous Mode */
|
||||||
#define LAN9118_MAC_CR_INVFILT (1 << 17) /* Inverse filtering */
|
#define LAN9118_MAC_CR_INVFILT (1 << 17) /* Inverse filtering */
|
||||||
#define LAN9118_MAC_CR_PASSBAD (1 << 16) /* Pass Bad Frames */
|
#define LAN9118_MAC_CR_PASSBAD (1 << 16) /* Pass Bad Frames */
|
||||||
#define LAN9118_MAC_CR_HO (1 << 15) /* Hash Only Filtering mode */
|
#define LAN9118_MAC_CR_HO (1 << 15) /* Hash Only Filtering mode */
|
||||||
#define LAN9118_MAC_CR_HPFILT (1 << 13) /* Hash/Perfect Flt Mode */
|
#define LAN9118_MAC_CR_HPFILT (1 << 13) /* Hash/Perfect Flt Mode */
|
||||||
#define LAN9118_MAC_CR_LCOLL (1 << 12) /* Late Collision Control */
|
#define LAN9118_MAC_CR_LCOLL (1 << 12) /* Late Collision Control */
|
||||||
#define LAN9118_MAC_CR_BCAST (1 << 11) /* Disable Broardcast Frms */
|
#define LAN9118_MAC_CR_BCAST (1 << 11) /* Disable Broardcast Frms */
|
||||||
#define LAN9118_MAC_CR_DISRTY (1 << 10) /* Disable Retry */
|
#define LAN9118_MAC_CR_DISRTY (1 << 10) /* Disable Retry */
|
||||||
#define LAN9118_MAC_CR_PADSTR (1 << 8) /* Automatic Pad String */
|
#define LAN9118_MAC_CR_PADSTR (1 << 8) /* Automatic Pad String */
|
||||||
#define LAN9118_MAC_CR_BOLMT (1 << 7) /* BackOff Limit */
|
#define LAN9118_MAC_CR_BOLMT (1 << 7) /* BackOff Limit */
|
||||||
#define LAN9118_MAC_CR_DFCHK (1 << 5) /* Deferral Check */
|
#define LAN9118_MAC_CR_DFCHK (1 << 5) /* Deferral Check */
|
||||||
#define LAN9118_MAC_CR_TXEN (1 << 3) /* Transmitter enable */
|
#define LAN9118_MAC_CR_TXEN (1 << 3) /* Transmitter enable */
|
||||||
#define LAN9118_MAC_CR_RXEN (1 << 2) /* Receiver enable */
|
#define LAN9118_MAC_CR_RXEN (1 << 2) /* Receiver enable */
|
||||||
#define LAN9118_ADDRH 0x2 /* MAC Address High */
|
#define LAN9118_ADDRH 0x2 /* MAC Address High */
|
||||||
#define LAN9118_ADDRL 0x3 /* MAC Address Low */
|
#define LAN9118_ADDRL 0x3 /* MAC Address Low */
|
||||||
#define LAN9118_HASHH 0x4 /* Multicast Hash Table High */
|
#define LAN9118_HASHH 0x4 /* Multicast Hash Table High */
|
||||||
#define LAN9118_HASHL 0x5 /* Multicast Hash Table Low */
|
#define LAN9118_HASHL 0x5 /* Multicast Hash Table Low */
|
||||||
#define LAN9118_MII_ACC 0x6 /* MII Access */
|
#define LAN9118_MII_ACC 0x6 /* MII Access */
|
||||||
#define LAN9118_MII_ACC_PHYA(a) ((a) << 11) /* PHY Address */
|
#define LAN9118_MII_ACC_PHYA(a) ((a) << 11) /* PHY Address */
|
||||||
#define LAN9118_MII_ACC_MIIRINDA(i) ((i) << 6) /* MII Register Index */
|
#define LAN9118_MII_ACC_MIIRINDA(i) ((i) << 6) /* MII Register Index */
|
||||||
#define LAN9118_MII_ACC_MIIWNR (1 << 1) /* MII Write */
|
#define LAN9118_MII_ACC_MIIWNR (1 << 1) /* MII Write */
|
||||||
#define LAN9118_MII_ACC_MIIBZY (1 << 0) /* MII Busy */
|
#define LAN9118_MII_ACC_MIIBZY (1 << 0) /* MII Busy */
|
||||||
#define LAN9118_MII_DATA 0x7 /* MII Data */
|
#define LAN9118_MII_DATA 0x7 /* MII Data */
|
||||||
#define LAN9118_FLOW 0x8 /* Flow Control */
|
#define LAN9118_FLOW 0x8 /* Flow Control */
|
||||||
#define LAN9118_FLOW_FCPT(t) ((t) << 16) /* Pause Time */
|
#define LAN9118_FLOW_FCPT(t) ((t) << 16) /* Pause Time */
|
||||||
#define LAN9118_FLOW_FCPASS (1 << 2) /* Pass Control Frame */
|
#define LAN9118_FLOW_FCPASS (1 << 2) /* Pass Control Frame */
|
||||||
#define LAN9118_FLOW_FCEN (1 << 1) /* Flow Control Enable */
|
#define LAN9118_FLOW_FCEN (1 << 1) /* Flow Control Enable */
|
||||||
#define LAN9118_FLOW_FCBUSY (1 << 0) /* Flow Control Busy */
|
#define LAN9118_FLOW_FCBUSY (1 << 0) /* Flow Control Busy */
|
||||||
#define LAN9118_VLAN1 0x9 /* VLAN1 Tag */
|
#define LAN9118_VLAN1 0x9 /* VLAN1 Tag */
|
||||||
#define LAN9118_VLAN2 0xa /* VLAN2 Tag */
|
#define LAN9118_VLAN2 0xa /* VLAN2 Tag */
|
||||||
#define LAN9118_WUFF 0xb /* Wake-up Frame Filter */
|
#define LAN9118_WUFF 0xb /* Wake-up Frame Filter */
|
||||||
#define LAN9118_WUCSR 0xc /* Wake-up Control and Status */
|
#define LAN9118_WUCSR 0xc /* Wake-up Control and Status */
|
||||||
|
|
||||||
/* PHY Registers */
|
/* PHY Registers */
|
||||||
#define LAN9118_MCSR 0x11 /* Mode Control/Status Register */
|
#define LAN9118_MCSR 0x11 /* Mode Control/Status Register */
|
||||||
#define LAN9118_MCSR_EDPWRDOWN (1 << 13) /* Energy Detect Power Down */
|
#define LAN9118_MCSR_EDPWRDOWN (1 << 13) /* Energy Detect Power Down */
|
||||||
#define LAN9118_MCSR_ENERGYON (1 << 1)
|
#define LAN9118_MCSR_ENERGYON (1 << 1)
|
||||||
#define LAN9118_SMR 0x12 /* Special Modes Register */
|
#define LAN9118_SMR 0x12 /* Special Modes Register */
|
||||||
#define LAN9118_SMR_PHYAD (0x01)
|
#define LAN9118_SMR_PHYAD (0x01)
|
||||||
#define LAN9118_SCSI 0x1b /* Special Control/Status Indications */
|
#define LAN9118_SCSI 0x1b /* Special Control/Status Indications */
|
||||||
#define LAN9118_SCSI_VCOOFF_LP (1 << 10)
|
#define LAN9118_SCSI_VCOOFF_LP (1 << 10)
|
||||||
#define LAN9118_SCSI_XPOL (1 << 4) /* Polarity state */
|
#define LAN9118_SCSI_XPOL (1 << 4) /* Polarity state */
|
||||||
#define LAN9118_ISR 0x1d /* Interrupt Source Register */
|
#define LAN9118_ISR 0x1d /* Interrupt Source Register */
|
||||||
#define LAN9118_IMR 0x1e /* Interrupt Mask Register */
|
#define LAN9118_IMR 0x1e /* Interrupt Mask Register */
|
||||||
#define LAN9118_I_ENERGYON (1 << 7)
|
#define LAN9118_I_ENERGYON (1 << 7)
|
||||||
#define LAN9118_I_AUTONEGOCOMPL (1 << 6)
|
#define LAN9118_I_AUTONEGOCOMPL (1 << 6)
|
||||||
#define LAN9118_I_REMOTEFAULT (1 << 5)
|
#define LAN9118_I_REMOTEFAULT (1 << 5)
|
||||||
#define LAN9118_I_LINKDOWN (1 << 4)
|
#define LAN9118_I_LINKDOWN (1 << 4)
|
||||||
#define LAN9118_I_AUTONEGOLPACK (1 << 3) /* AutoNego LP Acknowledge */
|
#define LAN9118_I_AUTONEGOLPACK (1 << 3) /* AutoNego LP Acknowledge */
|
||||||
#define LAN9118_I_PDF (1 << 2) /* Parallel Detection Fault */
|
#define LAN9118_I_PDF (1 << 2) /* Parallel Detection Fault */
|
||||||
#define LAN9118_I_AUTONEGOPR (1 << 1) /* AutoNego Page Received */
|
#define LAN9118_I_AUTONEGOPR (1 << 1) /* AutoNego Page Received */
|
||||||
#define LAN9118_PHYSCSR 0x1f /* PHY Special Control/Status Reg */
|
#define LAN9118_PHYSCSR 0x1f /* PHY Special Control/Status Reg */
|
||||||
#define LAN9118_PHYSCSR_AUTODONE (1 << 12) /* AutoNego done indication */
|
#define LAN9118_PHYSCSR_AUTODONE (1 << 12) /* AutoNego done indication */
|
||||||
#define LAN9118_PHYSCSR_SI_10 (1 << 2) /* Speed Indication */
|
#define LAN9118_PHYSCSR_SI_10 (1 << 2) /* Speed Indication */
|
||||||
#define LAN9118_PHYSCSR_SI_100 (2 << 2)
|
#define LAN9118_PHYSCSR_SI_100 (2 << 2)
|
||||||
#define LAN9118_PHYSCSR_SI_FDX (4 << 2)
|
#define LAN9118_PHYSCSR_SI_FDX (4 << 2)
|
||||||
|
|
||||||
|
|
||||||
/* TX Command 'A' Format */
|
/* TX Command 'A' Format */
|
||||||
#define LAN9118_TXC_A_IC (1 << 31) /* Interrupt on Completion */
|
#define LAN9118_TXC_A_IC (1 << 31) /* Interrupt on Completion */
|
||||||
#define LAN9118_TXC_A_BEA_4B (0 << 24) /* Buffer End Alignment: 4B */
|
#define LAN9118_TXC_A_BEA_4B (0 << 24) /* Buffer End Alignment: 4B */
|
||||||
#define LAN9118_TXC_A_BEA_16B (1 << 24) /* 16B */
|
#define LAN9118_TXC_A_BEA_16B (1 << 24) /* 16B */
|
||||||
#define LAN9118_TXC_A_BEA_32B (2 << 24) /* 32B */
|
#define LAN9118_TXC_A_BEA_32B (2 << 24) /* 32B */
|
||||||
#define LAN9118_TXC_A_DSO(x) ((x) << 16) /*Data Start Offset: bytes*/
|
#define LAN9118_TXC_A_DSO(x) ((x) << 16) /*Data Start Offset: bytes*/
|
||||||
#define LAN9118_TXC_A_FS (1 << 13) /* First Segment */
|
#define LAN9118_TXC_A_FS (1 << 13) /* First Segment */
|
||||||
#define LAN9118_TXC_A_LS (1 << 12) /* Last Segment */
|
#define LAN9118_TXC_A_LS (1 << 12) /* Last Segment */
|
||||||
#define LAN9118_TXC_A_BS(x) ((x) << 0) /* Buffer Size */
|
#define LAN9118_TXC_A_BS(x) ((x) << 0) /* Buffer Size */
|
||||||
|
|
||||||
/* TX Command 'B' Format */
|
/* TX Command 'B' Format */
|
||||||
#define LAN9118_TXC_B_PT(x) ((x) << 16) /* Packet Tag */
|
#define LAN9118_TXC_B_PT(x) ((x) << 16) /* Packet Tag */
|
||||||
#define LAN9118_TXC_B_ACRCD (1 << 13) /* Add CRC Disable */
|
#define LAN9118_TXC_B_ACRCD (1 << 13) /* Add CRC Disable */
|
||||||
#define LAN9118_TXC_B_DEFP (1 << 12) /* Dis Ether Frame Padding */
|
#define LAN9118_TXC_B_DEFP (1 << 12) /* Dis Ether Frame Padding */
|
||||||
#define LAN9118_TXC_B_PL(x) ((x) << 0) /* Packet Length */
|
#define LAN9118_TXC_B_PL(x) ((x) << 0) /* Packet Length */
|
||||||
|
|
||||||
/* TX Status Format */
|
/* TX Status Format */
|
||||||
#define LAN9118_TXS_PKTTAG(x) (((x) >> 16) & 0xff) /* Packet Tag */
|
#define LAN9118_TXS_PKTTAG(x) (((x) >> 16) & 0xff) /* Packet Tag */
|
||||||
#define LAN9118_TXS_ES (1 << 15) /* Error Status */
|
#define LAN9118_TXS_ES (1 << 15) /* Error Status */
|
||||||
#define LAN9118_TXS_LOC (1 << 11) /* Loss Of Carrier */
|
#define LAN9118_TXS_LOC (1 << 11) /* Loss Of Carrier */
|
||||||
#define LAN9118_TXS_NC (1 << 10) /* No Carrier */
|
#define LAN9118_TXS_NC (1 << 10) /* No Carrier */
|
||||||
#define LAN9118_TXS_LCOL (1 << 9) /* Late Collision */
|
#define LAN9118_TXS_LCOL (1 << 9) /* Late Collision */
|
||||||
#define LAN9118_TXS_ECOL (1 << 8) /* Excessive Collision*/
|
#define LAN9118_TXS_ECOL (1 << 8) /* Excessive Collision*/
|
||||||
#define LAN9118_TXS_COLCNT(x) (((x) >> 3) & 0xf) /* Collision Count */
|
#define LAN9118_TXS_COLCNT(x) (((x) >> 3) & 0xf) /* Collision Count */
|
||||||
#define LAN9118_TXS_ED (1 << 2) /* Excessive Deferral */
|
#define LAN9118_TXS_ED (1 << 2) /* Excessive Deferral */
|
||||||
#define LAN9118_TXS_DEFERRED (1 << 0) /* Deferred */
|
#define LAN9118_TXS_DEFERRED (1 << 0) /* Deferred */
|
||||||
|
|
||||||
/* RX Status Format */
|
/* RX Status Format */
|
||||||
#define LAN9118_RXS_FILTFAIL (1 << 30) /* Filtering Fail */
|
#define LAN9118_RXS_FILTFAIL (1 << 30) /* Filtering Fail */
|
||||||
#define LAN9118_RXS_PKTLEN(x) (((x) >> 16) & 0x3fff) /* Packet Len */
|
#define LAN9118_RXS_PKTLEN(x) (((x) >> 16) & 0x3fff) /* Packet Len */
|
||||||
#define LAN9118_RXS_ES (1 << 15) /* Error Status */
|
#define LAN9118_RXS_ES (1 << 15) /* Error Status */
|
||||||
#define LAN9118_RXS_BCF (1 << 13) /* Broadcast Frame */
|
#define LAN9118_RXS_BCF (1 << 13) /* Broadcast Frame */
|
||||||
#define LAN9118_RXS_LENERR (1 << 12) /* Length Error */
|
#define LAN9118_RXS_LENERR (1 << 12) /* Length Error */
|
||||||
#define LAN9118_RXS_RUNTF (1 << 11) /* Runt Frame */
|
#define LAN9118_RXS_RUNTF (1 << 11) /* Runt Frame */
|
||||||
#define LAN9118_RXS_MCF (1 << 10) /* Multicast Frame */
|
#define LAN9118_RXS_MCF (1 << 10) /* Multicast Frame */
|
||||||
#define LAN9118_RXS_FTL (1 << 7) /* Frame Too Long */
|
#define LAN9118_RXS_FTL (1 << 7) /* Frame Too Long */
|
||||||
#define LAN9118_RXS_COLS (1 << 6) /* Collision Seen */
|
#define LAN9118_RXS_COLS (1 << 6) /* Collision Seen */
|
||||||
#define LAN9118_RXS_FT (1 << 5) /* Frame Type */
|
#define LAN9118_RXS_FT (1 << 5) /* Frame Type */
|
||||||
#define LAN9118_RXS_RWTO (1 << 4) /* Rcv Watchdog time-out */
|
#define LAN9118_RXS_RWTO (1 << 4) /* Rcv Watchdog time-out */
|
||||||
#define LAN9118_RXS_MIIERR (1 << 3) /* MII Error */
|
#define LAN9118_RXS_MIIERR (1 << 3) /* MII Error */
|
||||||
#define LAN9118_RXS_DBIT (1 << 2) /* Drabbling Bit */
|
#define LAN9118_RXS_DBIT (1 << 2) /* Drabbling Bit */
|
||||||
#define LAN9118_RXS_CRCERR (1 << 1) /* CRC Error */
|
#define LAN9118_RXS_CRCERR (1 << 1) /* CRC Error */
|
||||||
|
|
||||||
#endif /* _LAN9118REG_H_ */
|
/* Basic mode control register. */
|
||||||
|
#define LAN9118_BMCR_ANRESTART 0x0200 /* Auto negotiation restart */
|
||||||
|
#define LAN9118_BMCR_ANENABLE 0x1000 /* Enable auto negotiation */
|
||||||
|
#define LAN9118_BMCR_RESET 0x8000 /* Reset the DP83840 */
|
||||||
|
#define LAN9118_BMSR_LSTATUS 0x0004 /* Link status */
|
||||||
|
|
||||||
|
/* Generic MII registers. */
|
||||||
|
#define LAN9118_MII_BMCR 0x00 /* Basic mode control register */
|
||||||
|
#define LAN9118_MII_BMSR 0x01 /* Basic mode status register */
|
||||||
|
#define LAN9118_MII_ADVERTISE 0x04 /* Advertisement control register */
|
||||||
|
|
||||||
|
#define LAN9118_GPT_CFG_TIMER_EN 0x20000000 /* R/W */
|
||||||
|
|
||||||
|
#define LAN9118_RX_STS_PKT_LEN 0x3FFF0000
|
||||||
|
#define LAN9118_TX_STS_UNDERRUN 0x00000002
|
||||||
|
|
||||||
|
#define LAN9118_HW_CFG_SF 0x00100000 /* R/W */
|
||||||
|
|
||||||
|
#define LAN9118_INT_STS_RSFL 0x00000008 /* R/WC */
|
||||||
|
#define LAN9118_INT_EN_RDFL_EN 0x00000020 /* R/W */
|
||||||
|
#define LAN9118_MAC_CR_HBDIS 0x10000000
|
||||||
|
|
||||||
|
#endif /* _LAN9118REG_H_ */
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue