libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity

[BSP] change UART flag when register device driver.

This commit is contained in:
Bernard Xiong 2014-09-24 11:04:57 +08:00
parent 640db6bdbd
commit ab20554254
1 changed files with 6 additions and 48 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

54
bsp/beaglebone/drivers/serial.c
View File

@ -345,23 +345,16 @@ static void config_pinmux(void)
int rt_hw_serial_init(void)
{
struct serial_configure config;
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
poweron_per_domain();
start_uart_clk();
config_pinmux();
#ifdef RT_USING_UART0
config.baud_rate = BAUD_RATE_115200;
config.bit_order = BIT_ORDER_LSB;
config.data_bits = DATA_BITS_8;
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial0.ops = &am33xx_uart_ops;
serial0.config = config;
/* enable RX interrupt */
UART_IER_REG(uart0.base) = 0x01;
/* install ISR */
@ -375,14 +368,6 @@ int rt_hw_serial_init(void)
#endif
#ifdef RT_USING_UART1
config.baud_rate = BAUD_RATE_115200;
config.bit_order = BIT_ORDER_LSB;
config.data_bits = DATA_BITS_8;
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial1.ops = &am33xx_uart_ops;
serial1.config = config;
/* enable RX interrupt */
@ -398,14 +383,6 @@ int rt_hw_serial_init(void)
#endif
#ifdef RT_USING_UART2
config.baud_rate = BAUD_RATE_115200;
config.bit_order = BIT_ORDER_LSB;
config.data_bits = DATA_BITS_8;
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial2.ops = &am33xx_uart_ops;
serial2.config = config;
/* enable RX interrupt */
@ -421,14 +398,6 @@ int rt_hw_serial_init(void)
#endif
#ifdef RT_USING_UART3
config.baud_rate = BAUD_RATE_115200;
config.bit_order = BIT_ORDER_LSB;
config.data_bits = DATA_BITS_8;
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial3.ops = &am33xx_uart_ops;
serial3.config = config;
/* enable RX interrupt */
@ -444,13 +413,8 @@ int rt_hw_serial_init(void)
#endif
#ifdef RT_USING_UART4
/* use 9600bps for GDB stub. */
config.baud_rate = BAUD_RATE_9600;
config.bit_order = BIT_ORDER_LSB;
config.data_bits = DATA_BITS_8;
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial4.ops = &am33xx_uart_ops;
serial4.config = config;
@ -462,19 +426,13 @@ int rt_hw_serial_init(void)
rt_hw_interrupt_mask(uart4.irq);
/* register UART4 device */
rt_hw_serial_register(&serial4, "uart4",
RT_DEVICE_FLAG_RDWR,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart4);
#endif
#ifdef RT_USING_UART5
config.baud_rate = BAUD_RATE_115200;
config.bit_order = BIT_ORDER_LSB;
config.data_bits = DATA_BITS_8;
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
config = RT_SERIAL_CONFIG_DEFAULT;
serial5.ops = &am33xx_uart_ops;
serial5.config = config;
/* enable RX interrupt */