[libcpu][asm9260t] Add new BSP for AlphaScale ASM9260T
This commit is contained in:
ardafu
parent
cc6b290640
commit
9f36fd61a4
|
|
@ -0,0 +1,44 @@
|
||||||
|
|
||||||
|
;; Memory information ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||||
|
;;
|
||||||
|
;; Used to define address zones within the ARM address space (Memory).
|
||||||
|
;;
|
||||||
|
;; Name may be almost anything
|
||||||
|
;; AdrSpace must be Memory
|
||||||
|
;; StartAdr start of memory block
|
||||||
|
;; EndAdr end of memory block
|
||||||
|
;; AccType type of access, read-only (R), read-write (RW) or SFR (W)
|
||||||
|
|
||||||
|
[Memory]
|
||||||
|
;; Name AdrSpace StartAdr EndAdr AccType Width
|
||||||
|
;Memory = SYSC0 Memory 0xFFFFE800 0xFFFFF9FF W
|
||||||
|
;Memory = SYSC1 Memory 0xFFFFFC00 0xFFFFFD7F W
|
||||||
|
;Memory = ROM Memory 0x00100000 0x00107FFF R
|
||||||
|
;Memory = BootMem Memory 0x00000000 0x000FFFFF R
|
||||||
|
;Memory = RAM0 Memory 0x00200000 0x00200FFF RW
|
||||||
|
;Memory = Periph Memory 0xFFFA0000 0xFFFE3FFF W
|
||||||
|
;Memory = USBH Memory 0x00500000 0x00503FFF W
|
||||||
|
;Memory = RAM1 Memory 0x00300000 0x00300FFF RW
|
||||||
|
;Memory = ExtDev Memory 0x10000000 0x8FFFFFFF RW
|
||||||
|
|
||||||
|
Memory = EMI_MEM Memory 0x00000000 0x3FFFFFFF RW
|
||||||
|
Memory = RAM Memory 0x40000000 0x40001FFF RW
|
||||||
|
Memory = AHB Memory 0x50000000 0x501FFFFF W
|
||||||
|
Memory = APB Memory 0x80000000 0x800BFFFF W
|
||||||
|
Memory = DMA0 Memory 0x80100000 0x8010FFFF W
|
||||||
|
Memory = DMA1 Memory 0x80200000 0x8020FFFF W
|
||||||
|
Memory = USB0 Memory 0x80300000 0x8030FFFF W
|
||||||
|
Memory = USB1 Memory 0x80400000 0x8040FFFF W
|
||||||
|
Memory = MAC Memory 0x80500000 0x8050FFFF W
|
||||||
|
Memory = NAND Memory 0x80600000 0x8060FFFF W
|
||||||
|
Memory = EMI_REG Memory 0x80700000 0x8070FFFF W
|
||||||
|
Memory = LCD Memory 0x80800000 0x8080FFFF W
|
||||||
|
Memory = SPI_FLASH Memory 0xF0000000 0xF7FFFFFF RW
|
||||||
|
Memory = ROM Memory 0xFFFF0000 0xFFFFFFFF R
|
||||||
|
|
||||||
|
|
||||||
|
TrustedRanges = true
|
||||||
|
UseSfrFilter = true
|
||||||
|
|
||||||
|
[SfrInclude]
|
||||||
|
File = ioASM9260T.ddf
|
||||||
|
|
@ -0,0 +1,272 @@
|
||||||
|
; ----------------------------------------------------------------------------
|
||||||
|
; Arda Technologies CO. Ltd. 2007-2015
|
||||||
|
; ----------------------------------------------------------------------------
|
||||||
|
; DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ARDA "AS IS" AND ANY EXPRESS OR
|
||||||
|
; IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||||
|
; MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||||
|
; DISCLAIMED. IN NO EVENT SHALL ARDA BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
; INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||||
|
; LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||||
|
; OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||||
|
; LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||||
|
; NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||||
|
; EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
; ----------------------------------------------------------------------------
|
||||||
|
; File Name : ASM9260T.ddf
|
||||||
|
; Object : ASM9260T definitions
|
||||||
|
; Generated : Arda SW Application Group 29/04/2015
|
||||||
|
;
|
||||||
|
; ----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
[Sfr]
|
||||||
|
|
||||||
|
; ========== Register definition for SYS peripheral ==========
|
||||||
|
sfr = "PRESETCTRL0", "Memory", 0x80040000, 4, base=16
|
||||||
|
sfr = "PRESETCTRL1", "Memory", 0x80040010, 4, base=16
|
||||||
|
sfr = "AHBCLKCTRL0", "Memory", 0x80040020, 4, base=16
|
||||||
|
sfr = "AHBCLKCTRL0.GPIO", "Memory", 0x80040020, 4, base=16, bitRange=4
|
||||||
|
sfr = "AHBCLKCTRL0.IOCONFIG", "Memory", 0x80040020, 4, base=16, bitRange=25
|
||||||
|
sfr = "AHBCLKCTRL1", "Memory", 0x80040030, 4, base=16
|
||||||
|
sfr = "AHBCLKCTRL1.TIMER0", "Memory", 0x80040030, 4, base=16, bitRange=4
|
||||||
|
sfr = "AHBCLKCTRL1.IRQ", "Memory", 0x80040030, 4, base=16, bitRange=8
|
||||||
|
sfr = "SYSPLLCTRL", "Memory", 0x80040100, 4, base=16
|
||||||
|
sfr = "SYSRSTSTAT", "Memory", 0x80040110, 4, base=16
|
||||||
|
sfr = "MAINCLKSEL", "Memory", 0x80040120, 4, base=16
|
||||||
|
sfr = "MAINCLKUEN", "Memory", 0x80040124, 4, base=16
|
||||||
|
sfr = "UARTCLKSEL", "Memory", 0x80040128, 4, base=16
|
||||||
|
sfr = "UARTCLKUEN", "Memory", 0x8004012C, 4, base=16
|
||||||
|
sfr = "CPUCLKDIV", "Memory", 0x8004017C, 4, base=16
|
||||||
|
sfr = "SYSAHBCLKDIV", "Memory", 0x80040180, 4, base=16
|
||||||
|
sfr = "UART0CLKDIV", "Memory", 0x80040198, 4, base=16
|
||||||
|
sfr = "UART1CLKDIV", "Memory", 0x8004019C, 4, base=16
|
||||||
|
sfr = "UART2CLKDIV", "Memory", 0x800401A0, 4, base=16
|
||||||
|
sfr = "UART3CLKDIV", "Memory", 0x800401A4, 4, base=16
|
||||||
|
sfr = "UART4CLKDIV", "Memory", 0x800401A8, 4, base=16
|
||||||
|
sfr = "UART5CLKDIV", "Memory", 0x800401AC, 4, base=16
|
||||||
|
sfr = "UART6CLKDIV", "Memory", 0x800401B0, 4, base=16
|
||||||
|
sfr = "UART7CLKDIV", "Memory", 0x800401B4, 4, base=16
|
||||||
|
sfr = "UART8CLKDIV", "Memory", 0x800401B8, 4, base=16
|
||||||
|
sfr = "UART9CLKDIV", "Memory", 0x800401BC, 4, base=16
|
||||||
|
sfr = "DEVICEID", "Memory", 0x80040400, 4, base=16
|
||||||
|
sfr = "PCON", "Memory", 0x80040500, 4, base=16
|
||||||
|
;-----------------ICOLL---------------------------------------------------------
|
||||||
|
sfr = "HW_ICOLL_VECTOR", "Memory", 0x80054000, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_LEVELACK", "Memory", 0x80054010, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_CTRL", "Memory", 0x80054020, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_CTRL.BYPASS_FSM", "Memory", 0x80054020, 4, base=16, bitRange=20
|
||||||
|
sfr = "HW_ICOLL_CTRL.NO_NESTING", "Memory", 0x80054020, 4, base=16, bitRange=19
|
||||||
|
sfr = "HW_ICOLL_CTRL.RSE_MODE", "Memory", 0x80054020, 4, base=16, bitRange=18
|
||||||
|
sfr = "HW_ICOLL_CTRL.IRQ_FINAL_ENABLE", "Memory", 0x80054020, 4, base=16, bitRange=16
|
||||||
|
sfr = "HW_ICOLL_STAT", "Memory", 0x80054030, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_STAT.vector_number", "Memory", 0x80054030, 4, base=16, bitRange=0-5
|
||||||
|
sfr = "HW_ICOLL_RAW0", "Memory", 0x80054040, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_RAW0.UART3_IRQ", "Memory", 0x80054040, 4, base=16, bitRange=18
|
||||||
|
sfr = "HW_ICOLL_RAW0.TIMER0_IRQ", "Memory", 0x80054040, 4, base=16, bitRange=29
|
||||||
|
sfr = "HW_ICOLL_RAW1", "Memory", 0x80054050, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_PRIORITY0", "Memory", 0x80054060, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_PRIORITY1", "Memory", 0x80054070, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_PRIORITY2", "Memory", 0x80054080, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_PRIORITY3", "Memory", 0x80054090, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_PRIORITY4", "Memory", 0x800540A0, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_PRIORITY5", "Memory", 0x800540B0, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_PRIORITY6", "Memory", 0x800540C0, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_PRIORITY7", "Memory", 0x800540D0, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_PRIORITY8", "Memory", 0x800540E0, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_PRIORITY9", "Memory", 0x800540F0, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_PRIORITY10", "Memory", 0x80054100, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_PRIORITY11", "Memory", 0x80054110, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_PRIORITY12", "Memory", 0x80054120, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_PRIORITY13", "Memory", 0x80054130, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_PRIORITY14", "Memory", 0x80054140, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_PRIORITY15", "Memory", 0x80054150, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_VBASE", "Memory", 0x80054160, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_DEBUG", "Memory", 0x80054170, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_DBGREAD0", "Memory", 0x80054180, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_DBGREAD1", "Memory", 0x80054190, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_DBGFLAG", "Memory", 0x800541A0, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_DBGREQUEST0", "Memory", 0x800541B0, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_DBGREQUEST1", "Memory", 0x800541C0, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_CLEAR0", "Memory", 0x800541D0, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_CLEAR0.UART3_IRQ", "Memory", 0x800541D0, 4, base=16, bitRange=18
|
||||||
|
sfr = "HW_ICOLL_CLEAR0.TIMER0_IRQ", "Memory", 0x800541D0, 4, base=16, bitRange=29
|
||||||
|
sfr = "HW_ICOLL_CLEAR1", "Memory", 0x800541E0, 4, base=16
|
||||||
|
sfr = "HW_ICOLL_UNDEF_VECTOR", "Memory", 0x800541F0, 4, base=16
|
||||||
|
|
||||||
|
;---------------------TIMER0----------------------------------------------
|
||||||
|
sfr = "HW_TIMER0_IR", "Memory", 0x80088000, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_IR.MR0_INT", "Memory", 0x80088000, 4, base=16, bitRange=0
|
||||||
|
sfr = "HW_TIMER0_IR.MR1_INT", "Memory", 0x80088000, 4, base=16, bitRange=1
|
||||||
|
sfr = "HW_TIMER0_IR.MR2_INT", "Memory", 0x80088000, 4, base=16, bitRange=2
|
||||||
|
sfr = "HW_TIMER0_IR.MR3_INT", "Memory", 0x80088000, 4, base=16, bitRange=3
|
||||||
|
sfr = "HW_TIMER0_IR.CR0_INT", "Memory", 0x80088000, 4, base=16, bitRange=4
|
||||||
|
sfr = "HW_TIMER0_TCR", "Memory", 0x80088010, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_TCR.CEN0", "Memory", 0x80088010, 4, base=16, bitRange=0
|
||||||
|
sfr = "HW_TIMER0_TCR.CEN1", "Memory", 0x80088010, 4, base=16, bitRange=1
|
||||||
|
sfr = "HW_TIMER0_TCR.CEN2", "Memory", 0x80088010, 4, base=16, bitRange=2
|
||||||
|
sfr = "HW_TIMER0_TCR.CEN3", "Memory", 0x80088010, 4, base=16, bitRange=3
|
||||||
|
sfr = "HW_TIMER0_TCR.CRST0", "Memory", 0x80088010, 4, base=16, bitRange=4
|
||||||
|
sfr = "HW_TIMER0_TCR.CRST1", "Memory", 0x80088010, 4, base=16, bitRange=5
|
||||||
|
sfr = "HW_TIMER0_TCR.CRST2", "Memory", 0x80088010, 4, base=16, bitRange=6
|
||||||
|
sfr = "HW_TIMER0_TCR.CRST3", "Memory", 0x80088010, 4, base=16, bitRange=7
|
||||||
|
sfr = "HW_TIMER0_DIR", "Memory", 0x80088020, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_DIR.DIR0", "Memory", 0x80088020, 4, base=16, bitRange=0-1
|
||||||
|
sfr = "HW_TIMER0_DIR.DIR1", "Memory", 0x80088020, 4, base=16, bitRange=4-5
|
||||||
|
sfr = "HW_TIMER0_DIR.DIR2", "Memory", 0x80088020, 4, base=16, bitRange=8-9
|
||||||
|
sfr = "HW_TIMER0_DIR.DIR3", "Memory", 0x80088020, 4, base=16, bitRange=12-13
|
||||||
|
sfr = "HW_TIMER0_TC0", "Memory", 0x80088030, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_TC1", "Memory", 0x80088040, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_TC2", "Memory", 0x80088050, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_TC3", "Memory", 0x80088060, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_PR", "Memory", 0x80088070, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_PC", "Memory", 0x80088080, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_MCR", "Memory", 0x80088090, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_MCR.MR0INT", "Memory", 0x80088090, 4, base=16, bitRange=0
|
||||||
|
sfr = "HW_TIMER0_MCR.MR0RST", "Memory", 0x80088090, 4, base=16, bitRange=1
|
||||||
|
sfr = "HW_TIMER0_MCR.MR0STOP", "Memory", 0x80088090, 4, base=16, bitRange=2
|
||||||
|
sfr = "HW_TIMER0_MCR.MR1INT", "Memory", 0x80088090, 4, base=16, bitRange=3
|
||||||
|
sfr = "HW_TIMER0_MCR.MR1RST", "Memory", 0x80088090, 4, base=16, bitRange=4
|
||||||
|
sfr = "HW_TIMER0_MCR.MR1STOP", "Memory", 0x80088090, 4, base=16, bitRange=5
|
||||||
|
sfr = "HW_TIMER0_MCR.MR2INT", "Memory", 0x80088090, 4, base=16, bitRange=6
|
||||||
|
sfr = "HW_TIMER0_MCR.MR2RST", "Memory", 0x80088090, 4, base=16, bitRange=7
|
||||||
|
sfr = "HW_TIMER0_MCR.MR2STOP", "Memory", 0x80088090, 4, base=16, bitRange=8
|
||||||
|
sfr = "HW_TIMER0_MCR.MR3INT", "Memory", 0x80088090, 4, base=16, bitRange=9
|
||||||
|
sfr = "HW_TIMER0_MCR.MR3RST", "Memory", 0x80088090, 4, base=16, bitRange=10
|
||||||
|
sfr = "HW_TIMER0_MCR.MR3STOP", "Memory", 0x80088090, 4, base=16, bitRange=11
|
||||||
|
sfr = "HW_TIMER0_MR0", "Memory", 0x800880a0, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_MR1", "Memory", 0x800880b0, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_MR2", "Memory", 0x800880C0, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_MR3", "Memory", 0x800880D0, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_CCR", "Memory", 0x800880E0, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_CCR.CAP0RE", "Memory", 0x800880E0, 4, base=16, bitRange=0
|
||||||
|
sfr = "HW_TIMER0_CCR.CAP0FE", "Memory", 0x800880E0, 4, base=16, bitRange=1
|
||||||
|
sfr = "HW_TIMER0_CCR.CAP0I", "Memory", 0x800880E0, 4, base=16, bitRange=2
|
||||||
|
sfr = "HW_TIMER0_CR0", "Memory", 0x800880F0, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_CR1", "Memory", 0x80088100, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_CR2", "Memory", 0x80088110, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_CR3", "Memory", 0x80088120, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_EMR", "Memory", 0x80088130, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_PWMTH0", "Memory", 0x80088140, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_PWMTH1", "Memory", 0x80088150, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_PWMTH2", "Memory", 0x80088160, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_PWMTH3", "Memory", 0x80088170, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_CTCR", "Memory", 0x80088180, 4, base=16
|
||||||
|
sfr = "HW_TIMER0_PWMC", "Memory", 0x80088190, 4, base=16
|
||||||
|
|
||||||
|
;---------------------UART3-------------------------------------------------------
|
||||||
|
sfr = "HW_USART3_CTRL0", "Memory", 0x8000C000, 4, base=16
|
||||||
|
sfr = "HW_USART3_CTRL0.XFER_COUNT", "Memory", 0x8000C000, 4, base=16, bitRange=0-15
|
||||||
|
sfr = "HW_USART3_CTRL0.RXTIMEOUT", "Memory", 0x8000C000, 4, base=16, bitRange=16-23
|
||||||
|
sfr = "HW_USART3_CTRL0.RXTO_ENABLE", "Memory", 0x8000C000, 4, base=16, bitRange=24
|
||||||
|
sfr = "HW_USART3_CTRL0.RX_SOURCE", "Memory", 0x8000C000, 4, base=16, bitRange=25
|
||||||
|
sfr = "HW_USART3_CTRL0.RUN", "Memory", 0x8000C000, 4, base=16, bitRange=28
|
||||||
|
sfr = "HW_USART3_CTRL0.CLKGATE", "Memory", 0x8000C000, 4, base=16, bitRange=30
|
||||||
|
sfr = "HW_USART3_CTRL0.SOFTRST", "Memory", 0x8000C000, 4, base=16, bitRange=31
|
||||||
|
sfr = "HW_USART3_CTRL1", "Memory", 0x8000C010, 4, base=16
|
||||||
|
sfr = "HW_USART3_CTRL1.XFER_COUNT", "Memory", 0x8000C010, 4, base=16, bitRange=0-15
|
||||||
|
sfr = "HW_USART3_CTRL1.RUN", "Memory", 0x8000C010, 4, base=16, bitRange=28
|
||||||
|
sfr = "HW_USART3_CTRL2", "Memory", 0x8000C020, 4, base=16
|
||||||
|
sfr = "HW_USART3_CTRL2.USARTEN", "Memory", 0x8000C020, 4, base=16, bitRange=0
|
||||||
|
sfr = "HW_USART3_CTRL2.SIREN", "Memory", 0x8000C020, 4, base=16, bitRange=1
|
||||||
|
sfr = "HW_USART3_CTRL2.SIRLP", "Memory", 0x8000C020, 4, base=16, bitRange=2
|
||||||
|
sfr = "HW_USART3_CTRL2.LBE", "Memory", 0x8000C020, 4, base=16, bitRange=7
|
||||||
|
sfr = "HW_USART3_CTRL2.TXE", "Memory", 0x8000C020, 4, base=16, bitRange=8
|
||||||
|
sfr = "HW_USART3_CTRL2.RXE", "Memory", 0x8000C020, 4, base=16, bitRange=9
|
||||||
|
sfr = "HW_USART3_CTRL2.DTR", "Memory", 0x8000C020, 4, base=16, bitRange=10
|
||||||
|
sfr = "HW_USART3_CTRL2.RTS", "Memory", 0x8000C020, 4, base=16, bitRange=11
|
||||||
|
sfr = "HW_USART3_CTRL2.OUT1", "Memory", 0x8000C020, 4, base=16, bitRange=12
|
||||||
|
sfr = "HW_USART3_CTRL2.OUT2", "Memory", 0x8000C020, 4, base=16, bitRange=13
|
||||||
|
sfr = "HW_USART3_CTRL2.RTSEM", "Memory", 0x8000C020, 4, base=16, bitRange=14
|
||||||
|
sfr = "HW_USART3_CTRL2.CTSEN", "Memory", 0x8000C020, 4, base=16, bitRange=15
|
||||||
|
sfr = "HW_USART3_CTRL2.TXIFLSEL", "Memory", 0x8000C020, 4, base=16, bitRange=16-18
|
||||||
|
sfr = "HW_USART3_CTRL2.RXIFLSEL", "Memory", 0x8000C020, 4, base=16, bitRange=20-22
|
||||||
|
sfr = "HW_USART3_CTRL2.RXDMAE", "Memory", 0x8000C020, 4, base=16, bitRange=24
|
||||||
|
sfr = "HW_USART3_CTRL2.TXDMAE", "Memory", 0x8000C020, 4, base=16, bitRange=25
|
||||||
|
sfr = "HW_USART3_CTRL2.DMAONERROR", "Memory", 0x8000C020, 4, base=16, bitRange=26
|
||||||
|
|
||||||
|
sfr = "HW_USART3_LINECTRL", "Memory", 0x8000C030, 4, base=16
|
||||||
|
sfr = "HW_USART3_LINECTRL.BRK", "Memory", 0x8000C030, 4, base=16, bitRange=0
|
||||||
|
sfr = "HW_USART3_LINECTRL.PEN", "Memory", 0x8000C030, 4, base=16, bitRange=1
|
||||||
|
sfr = "HW_USART3_LINECTRL.EPS", "Memory", 0x8000C030, 4, base=16, bitRange=2
|
||||||
|
sfr = "HW_USART3_LINECTRL.STP2", "Memory", 0x8000C030, 4, base=16, bitRange=3
|
||||||
|
sfr = "HW_USART3_LINECTRL.FEN", "Memory", 0x8000C030, 4, base=16, bitRange=4
|
||||||
|
sfr = "HW_USART3_LINECTRL.WLEN", "Memory", 0x8000C030, 4, base=16, bitRange=5:6
|
||||||
|
sfr = "HW_USART3_LINECTRL.SPS", "Memory", 0x8000C030, 4, base=16, bitRange=7
|
||||||
|
sfr = "HW_USART3_LINECTRL.BAUD_DIVFRA", "Memory", 0x8000C030, 4, base=16, bitRange=8-13
|
||||||
|
sfr = "HW_USART3_LINECTRL.BAUD_DIVINT", "Memory", 0x8000C030, 4, base=16, bitRange=16-31
|
||||||
|
sfr = "HW_USART3_INTR", "Memory", 0x8000C040, 4, base=16
|
||||||
|
sfr = "HW_USART3_INTR.RXIS", "Memory", 0x8000C040, 4, base=16, bitRange=4
|
||||||
|
sfr = "HW_USART3_INTR.TXIS", "Memory", 0x8000C040, 4, base=16, bitRange=5
|
||||||
|
sfr = "HW_USART3_INTR.RTIS", "Memory", 0x8000C040, 4, base=16, bitRange=6
|
||||||
|
sfr = "HW_USART3_INTR.RXIEN", "Memory", 0x8000C040, 4, base=16, bitRange=20
|
||||||
|
sfr = "HW_USART3_INTR.TXIEN", "Memory", 0x8000C040, 4, base=16, bitRange=21
|
||||||
|
sfr = "HW_USART3_INTR.RTIEN", "Memory", 0x8000C040, 4, base=16, bitRange=22
|
||||||
|
sfr = "HW_USART3_DATA", "Memory", 0x8000C050, 4, base=16
|
||||||
|
sfr = "HW_USART3_STAT", "Memory", 0x8000C060, 4, base=16
|
||||||
|
sfr = "HW_USART3_STAT.RXOUNT", "Memory", 0x8000C060, 4, base=16, bitRange=0-15
|
||||||
|
sfr = "HW_USART3_STAT.OEER", "Memory", 0x8000C060, 4, base=16, bitRange=19
|
||||||
|
sfr = "HW_USART3_STAT.RXBYTE_INVOID", "Memory", 0x8000C060, 4, base=16, bitRange=20-23
|
||||||
|
sfr = "HW_USART3_STAT.RXFE", "Memory", 0x8000C060, 4, base=16, bitRange=24
|
||||||
|
sfr = "HW_USART3_STAT.TXFF", "Memory", 0x8000C060, 4, base=16, bitRange=25
|
||||||
|
sfr = "HW_USART3_STAT.RXFF", "Memory", 0x8000C060, 4, base=16, bitRange=26
|
||||||
|
sfr = "HW_USART3_STAT.TXFE", "Memory", 0x8000C060, 4, base=16, bitRange=27
|
||||||
|
sfr = "HW_USART3_STAT.BUSY", "Memory", 0x8000C060, 4, base=16, bitRange=29
|
||||||
|
sfr = "HW_USART3_STAT.HISPEED", "Memory", 0x8000C060, 4, base=16, bitRange=30
|
||||||
|
sfr = "HW_USART3_STAT.PRESENT", "Memory", 0x8000C060, 4, base=16, bitRange=31
|
||||||
|
sfr = "HW_USART3_DEBUG", "Memory", 0x8000C070, 4, base=16
|
||||||
|
sfr = "HW_USART3_ILPR", "Memory", 0x8000C080, 4, base=16
|
||||||
|
sfr = "HW_USART3_RS485CTRL", "Memory", 0x8000C090, 4, base=16
|
||||||
|
sfr = "HW_USART3_RS485ADRMATCH", "Memory", 0x8000C0A0, 4, base=16
|
||||||
|
sfr = "HW_USART3_RS485DLY", "Memory", 0x8000C0B0, 4, base=16
|
||||||
|
sfr = "HW_USART3_AUTOBAUD", "Memory", 0x8000C0C0, 4, base=16
|
||||||
|
sfr = "HW_USART3_CTRL3", "Memory", 0x8000C0D0, 4, base=16
|
||||||
|
sfr = "HW_USART3_ISO7816CTRL", "Memory", 0x8000C0E0, 4, base=16
|
||||||
|
sfr = "HW_USART3_ISO7816ERRCNT", "Memory", 0x8000C0F0, 4, base=16
|
||||||
|
sfr = "HW_USART3_ISO7816STAT", "Memory", 0x8000C100, 4, base=16
|
||||||
|
;----------------------GPIO--------------------------------------------------------------------
|
||||||
|
sfr = "HW_GPIO_DATA0", "Memory", 0x50000000, 4, base=16
|
||||||
|
sfr = "HW_GPIO_DATA1", "Memory", 0x50010000, 4, base=16
|
||||||
|
sfr = "HW_GPIO_DATA2", "Memory", 0x50020000, 4, base=16
|
||||||
|
sfr = "HW_GPIO_DATA3", "Memory", 0x50030000, 4, base=16
|
||||||
|
sfr = "HW_GPIO_DIR0", "Memory", 0x50008000, 4, base=16
|
||||||
|
sfr = "HW_GPIO_DIR1", "Memory", 0x50018000, 4, base=16
|
||||||
|
sfr = "HW_GPIO_DIR2", "Memory", 0x50028000, 4, base=16
|
||||||
|
sfr = "HW_GPIO_DIR3", "Memory", 0x50038000, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IS0", "Memory", 0x50008010, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IS1", "Memory", 0x50018010, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IS2", "Memory", 0x50028010, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IS3", "Memory", 0x50038010, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IBE0", "Memory", 0x50008020, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IBE1", "Memory", 0x50018020, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IBE2", "Memory", 0x50028020, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IBE3", "Memory", 0x50038020, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IEV0", "Memory", 0x50008030, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IEV1", "Memory", 0x50018030, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IEV2", "Memory", 0x50028030, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IEV3", "Memory", 0x50038030, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IE0", "Memory", 0x50008040, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IE1", "Memory", 0x50018040, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IE2", "Memory", 0x50028040, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IE3", "Memory", 0x50038040, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IRS0", "Memory", 0x50008050, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IRS1", "Memory", 0x50018050, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IRS2", "Memory", 0x50028050, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IRS3", "Memory", 0x50038050, 4, base=16
|
||||||
|
sfr = "HW_GPIO_MIS0", "Memory", 0x50008060, 4, base=16
|
||||||
|
sfr = "HW_GPIO_MIS1", "Memory", 0x50018060, 4, base=16
|
||||||
|
sfr = "HW_GPIO_MIS2", "Memory", 0x50028060, 4, base=16
|
||||||
|
sfr = "HW_GPIO_MIS3", "Memory", 0x50038060, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IC0", "Memory", 0x50008070, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IC1", "Memory", 0x50018070, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IC2", "Memory", 0x50028070, 4, base=16
|
||||||
|
sfr = "HW_GPIO_IC3", "Memory", 0x50038070, 4, base=16
|
||||||
|
sfr = "HW_GPIO_DATAMASK0", "Memory", 0x50008080, 4, base=16
|
||||||
|
sfr = "HW_GPIO_DATAMASK1", "Memory", 0x50018080, 4, base=16
|
||||||
|
sfr = "HW_GPIO_DATAMASK2", "Memory", 0x50028080, 4, base=16
|
||||||
|
sfr = "HW_GPIO_DATAMASK3", "Memory", 0x50038080, 4, base=16
|
||||||
|
|
||||||
|
[SfrGroupInfo]
|
||||||
|
group = "SYS", "PRESETCTRL0", "PRESETCTRL1", "AHBCLKCTRL0", "AHBCLKCTRL1", "SYSPLLCTRL", "SYSRSTSTAT", "MAINCLKSEL","MAINCLKUEN", "UARTCLKSEL", "UARTCLKUEN", "CPUCLKDIV", "SYSAHBCLKDIV", "UART0CLKDIV", "UART1CLKDIV", "UART2CLKDIV", "UART3CLKDIV", "UART4CLKDIV", "UART5CLKDIV", "UART6CLKDIV", "UART7CLKDIV", "UART8CLKDIV", "UART9CLKDIV", "DEVICEID","PCON"
|
||||||
|
group = "ICOLL", "HW_ICOLL_VECTOR", "HW_ICOLL_LEVELACK", "HW_ICOLL_CTRL", "HW_ICOLL_STAT", "HW_ICOLL_RAW0", "HW_ICOLL_RAW1", "HW_ICOLL_PRIORITY0", "HW_ICOLL_PRIORITY1", "HW_ICOLL_PRIORITY2", "HW_ICOLL_PRIORITY3", "HW_ICOLL_PRIORITY4", "HW_ICOLL_PRIORITY5", "HW_ICOLL_PRIORITY6", "HW_ICOLL_PRIORITY7", "HW_ICOLL_PRIORITY8", "HW_ICOLL_PRIORITY9", "HW_ICOLL_PRIORITY10", "HW_ICOLL_PRIORITY11", "HW_ICOLL_PRIORITY12", "HW_ICOLL_PRIORITY13", "HW_ICOLL_PRIORITY14", "HW_ICOLL_PRIORITY15", "HW_ICOLL_VBASE", "HW_ICOLL_DEBUG", "HW_ICOLL_DBGREAD0", "HW_ICOLL_DBGREAD1", "HW_ICOLL_DBGFLAG", "HW_ICOLL_DBGREQUEST0", "HW_ICOLL_DBGREQUEST1", "HW_ICOLL_CLEAR0", "HW_ICOLL_CLEAR1", "HW_ICOLL_UNDEF_VECTOR",
|
||||||
|
group = "TIMER0", "HW_TIMER0_IR","HW_TIMER0_TCR","HW_TIMER0_DIR","HW_TIMER0_TC0","HW_TIMER0_TC1","HW_TIMER0_TC2","HW_TIMER0_TC3","HW_TIMER0_PR","HW_TIMER0_PC","HW_TIMER0_MCR","HW_TIMER0_MR0","HW_TIMER0_MR1","HW_TIMER0_MR2","HW_TIMER0_MR3","HW_TIMER0_CCR","HW_TIMER0_CR0","HW_TIMER0_CR1","HW_TIMER0_CR2","HW_TIMER0_CR3","HW_TIMER0_EMR","HW_TIMER0_PWMTH0","HW_TIMER0_PWMTH1","HW_TIMER0_PWMTH2","HW_TIMER0_PWMTH3","HW_TIMER0_CTCR","HW_TIMER0_PWMC"
|
||||||
|
group = "USART3", "HW_USART3_CTRL0", "HW_USART3_CTRL1", "HW_USART3_CTRL2", "HW_USART3_LINECTRL", "HW_USART3_INTR", "HW_USART3_DATA", "HW_USART3_STAT", "HW_USART3_DEBUG", "HW_USART3_ILPR", "HW_USART3_RS485CTRL", "HW_USART3_RS485ADRMATCH", "HW_USART3_RS485DLY", "HW_USART3_AUTOBAUD", "HW_USART3_CTRL3", "HW_USART3_ISO7816CTRL", "HW_USART3_ISO7816ERRCNT", "HW_USART3_ISO7816STAT"
|
||||||
|
group = "GPIO","HW_GPIO_DATA0" ,"HW_GPIO_DATA1" ,"HW_GPIO_DATA2" ,"HW_GPIO_DATA3" ,"HW_GPIO_DIR0" ,"HW_GPIO_DIR1" ,"HW_GPIO_DIR2" ,"HW_GPIO_DIR3" ,"HW_GPIO_IS0" ,"HW_GPIO_IS1" ,"HW_GPIO_IS2" ,"HW_GPIO_IS3" ,"HW_GPIO_IBE0" ,"HW_GPIO_IBE1" ,"HW_GPIO_IBE2" ,"HW_GPIO_IBE3" ,"HW_GPIO_IEV0" ,"HW_GPIO_IEV1" ,"HW_GPIO_IEV2" ,"HW_GPIO_IEV3" ,"HW_GPIO_IE0" ,"HW_GPIO_IE1" ,"HW_GPIO_IE2" ,"HW_GPIO_IE3" ,"HW_GPIO_IRS0" ,"HW_GPIO_IRS1" ,"HW_GPIO_IRS2" ,"HW_GPIO_IRS3" ,"HW_GPIO_MIS0" ,"HW_GPIO_MIS1" ,"HW_GPIO_MIS2" ,"HW_GPIO_MIS3" ,"HW_GPIO_IC0" ,"HW_GPIO_IC1" ,"HW_GPIO_IC2" ,"HW_GPIO_IC3" ,"HW_GPIO_DATAMASK0" ,"HW_GPIO_DATAMASK1" ,"HW_GPIO_DATAMASK2" ,"HW_GPIO_DATAMASK3"
|
||||||
|
|
@ -0,0 +1,43 @@
|
||||||
|
[FILEFORMAT]
|
||||||
|
rev=1.6
|
||||||
|
|
||||||
|
[CHIP]
|
||||||
|
//Chip name
|
||||||
|
name=ASM9260T
|
||||||
|
|
||||||
|
//What endian modes does the chip support? (le_be8_be32(default), le_be8, le_be32, le, be8_be32, be8, be32)
|
||||||
|
endiansupport=le
|
||||||
|
|
||||||
|
//Does the chip support the thumb instruction set? (true(default), false)
|
||||||
|
thumbsupport=true
|
||||||
|
|
||||||
|
//Does the chip support the arm instruction set? (true(default), false)
|
||||||
|
armsupport=true
|
||||||
|
|
||||||
|
//Does the chip have an FPU coprocessor?
|
||||||
|
//(VFPv1,VFPv2,VFP9-S,None(default)
|
||||||
|
fpu=None
|
||||||
|
|
||||||
|
//Debugger interface, default JTAG=true, RTCK=true, SWD=true if Cortex cores, SWD=false if ARM cores, SWO_TraceD0=false
|
||||||
|
JTAG=true
|
||||||
|
RTCK=false
|
||||||
|
SWD=false
|
||||||
|
SWO_TraceD0=false
|
||||||
|
|
||||||
|
[CORE]
|
||||||
|
//Name of the ARM processor core
|
||||||
|
name=ARM926EJ-S
|
||||||
|
|
||||||
|
[DDF FILE]
|
||||||
|
//Name of the ddf file
|
||||||
|
name=AlphaScale\ASM9260T.ddf
|
||||||
|
|
||||||
|
[LINKER FILE]
|
||||||
|
//Name of the linker config file
|
||||||
|
name=$TOOLKIT_DIR$\config\linker\AlphaScale\sam9260t\sam9260t_sdram.icf
|
||||||
|
|
||||||
|
[FLASH LOADER]
|
||||||
|
name=$TOOLKIT_DIR$\config\flashloader\
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -0,0 +1,7 @@
|
||||||
|
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||||
|
<optionMenuItem>
|
||||||
|
<tag>ASM9260T</tag>
|
||||||
|
<display>AlphaScale ASM9260T</display>
|
||||||
|
<data>$CUR_DIR$\ASM9260T.i79</data>
|
||||||
|
</optionMenuItem>
|
||||||
|
|
||||||
|
|
@ -0,0 +1,59 @@
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// Linker scatter for running in external SDRAM on the ASM9260T
|
||||||
|
// By ArdaFu 2015-04-29
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
//
|
||||||
|
// Define a memory region that covers the entire 4 GB addressible space of the
|
||||||
|
// processor.
|
||||||
|
//
|
||||||
|
define memory mem with size = 4G;
|
||||||
|
|
||||||
|
//
|
||||||
|
// Define a region for the on-chip flash. size = 2MB
|
||||||
|
//
|
||||||
|
define region FLASH = mem:[from 0x20000000 to 0x201FFFFF];
|
||||||
|
|
||||||
|
//
|
||||||
|
// Define a region for the on-chip SRAM. size = 30MB
|
||||||
|
//
|
||||||
|
define region SRAM = mem:[from 0x20200000 to 0x21FFFFFF];
|
||||||
|
|
||||||
|
//
|
||||||
|
// Indicate that the read/write values should be initialized by copying from
|
||||||
|
// flash.
|
||||||
|
//
|
||||||
|
initialize by copy { readwrite };
|
||||||
|
|
||||||
|
//
|
||||||
|
// Indicate that the noinit values should be left alone. This includes the
|
||||||
|
// stack, which if initialized will destroy the return address from the
|
||||||
|
// initialization code, causing the processor to branch to zero and fault.
|
||||||
|
//
|
||||||
|
do not initialize { section .noinit };
|
||||||
|
|
||||||
|
//
|
||||||
|
// Place the interrupt vectors at the start of flash.
|
||||||
|
//
|
||||||
|
place at start of FLASH { readonly section .intvec };
|
||||||
|
|
||||||
|
//
|
||||||
|
// Place the remainder of the read-only items into flash.
|
||||||
|
//
|
||||||
|
place in FLASH { readonly };
|
||||||
|
|
||||||
|
//
|
||||||
|
// Place the RAM vector table at the start of SRAM.
|
||||||
|
//
|
||||||
|
place at start of SRAM { section VTABLE };
|
||||||
|
|
||||||
|
//
|
||||||
|
// Place all read/write items into SRAM.
|
||||||
|
//
|
||||||
|
place in SRAM { readwrite};
|
||||||
|
//
|
||||||
|
// RT-thread symbols
|
||||||
|
//
|
||||||
|
keep { section FSymTab };
|
||||||
|
keep { section VSymTab };
|
||||||
|
keep { section .rti_fn* };
|
||||||
|
|
@ -0,0 +1,7 @@
|
||||||
|
How to use:
|
||||||
|
(By ArdaFu 2015-04-29)
|
||||||
|
|
||||||
|
1. Copy %arm% folder to &IAR EWARM% folder
|
||||||
|
2. Restart your IDE.
|
||||||
|
3. Select AlphaScale ASM9260T at project options-> General Options -> Target-> Device.
|
||||||
|
4. Start debug :).
|
||||||
|
|
@ -0,0 +1,14 @@
|
||||||
|
# for module compiling
|
||||||
|
import os
|
||||||
|
Import('RTT_ROOT')
|
||||||
|
|
||||||
|
cwd = str(Dir('#'))
|
||||||
|
objs = []
|
||||||
|
list = os.listdir(cwd)
|
||||||
|
|
||||||
|
for d in list:
|
||||||
|
path = os.path.join(cwd, d)
|
||||||
|
if os.path.isfile(os.path.join(path, 'SConscript')):
|
||||||
|
objs = objs + SConscript(os.path.join(d, 'SConscript'))
|
||||||
|
|
||||||
|
Return('objs')
|
||||||
|
|
@ -0,0 +1,38 @@
|
||||||
|
import os
|
||||||
|
import sys
|
||||||
|
import rtconfig
|
||||||
|
|
||||||
|
if os.getenv('RTT_ROOT'):
|
||||||
|
RTT_ROOT = os.getenv('RTT_ROOT')
|
||||||
|
else:
|
||||||
|
RTT_ROOT = os.path.normpath(os.getcwd() + '/../..')
|
||||||
|
|
||||||
|
sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
|
||||||
|
from building import *
|
||||||
|
|
||||||
|
TARGET = 'rtthread.' + rtconfig.TARGET_EXT
|
||||||
|
|
||||||
|
env = Environment(tools = ['mingw'],
|
||||||
|
AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
|
||||||
|
CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
|
||||||
|
AR = rtconfig.AR, ARFLAGS = '-rc',
|
||||||
|
LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
|
||||||
|
env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
|
||||||
|
|
||||||
|
Export('RTT_ROOT')
|
||||||
|
Export('rtconfig')
|
||||||
|
|
||||||
|
# prepare building environment
|
||||||
|
objs = PrepareBuilding(env, RTT_ROOT)
|
||||||
|
|
||||||
|
if GetDepend('RT_USING_WEBSERVER'):
|
||||||
|
objs = objs + SConscript(RTT_ROOT + '/components/net/webserver/SConscript', variant_dir='build/net/webserver', duplicate=0)
|
||||||
|
|
||||||
|
if GetDepend('RT_USING_RTGUI'):
|
||||||
|
objs = objs + SConscript(RTT_ROOT + '/examples/gui/SConscript', variant_dir='build/examples/gui', duplicate=0)
|
||||||
|
|
||||||
|
# libc testsuite
|
||||||
|
#objs = objs + SConscript(RTT_ROOT + '/examples/libc/SConscript', variant_dir='build/examples/libc', duplicate=0)
|
||||||
|
|
||||||
|
# make a building
|
||||||
|
DoBuilding(TARGET, objs)
|
||||||
|
|
@ -0,0 +1,11 @@
|
||||||
|
Import('RTT_ROOT')
|
||||||
|
Import('rtconfig')
|
||||||
|
from building import *
|
||||||
|
|
||||||
|
cwd = os.path.join(str(Dir('#')), 'applications')
|
||||||
|
src = Glob('*.c')
|
||||||
|
CPPPATH = [cwd, str(Dir('#'))]
|
||||||
|
|
||||||
|
group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
|
||||||
|
|
||||||
|
Return('group')
|
||||||
|
|
@ -0,0 +1,76 @@
|
||||||
|
/*
|
||||||
|
* File : application.c
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006-2015, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2011-01-13 weety first version
|
||||||
|
* 2015-04-27 ArdaFu Port bsp from at91sam9260 to asm9260t
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <rtthread.h>
|
||||||
|
#include <rtdevice.h>
|
||||||
|
|
||||||
|
void rt_init_thread_entry(void* parameter)
|
||||||
|
{
|
||||||
|
/* Initialization RT-Thread Components */
|
||||||
|
rt_components_init();
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef RT_USING_LED
|
||||||
|
#include "led.h"
|
||||||
|
|
||||||
|
void rt_led_thread_entry(void* parameter)
|
||||||
|
{
|
||||||
|
rt_uint8_t cnt = 0;
|
||||||
|
led_init();
|
||||||
|
while(1)
|
||||||
|
{
|
||||||
|
/* light on leds for one second */
|
||||||
|
rt_thread_delay(40);
|
||||||
|
cnt++;
|
||||||
|
if(cnt & 0x01)
|
||||||
|
led_on(1);
|
||||||
|
else
|
||||||
|
led_off(1);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static void start_led_thread(void)
|
||||||
|
{
|
||||||
|
rt_thread_t led_thread;
|
||||||
|
led_thread = rt_thread_create("led", rt_led_thread_entry, RT_NULL, 512,
|
||||||
|
(RT_THREAD_PRIORITY_MAX / 8 * 5), 20);
|
||||||
|
if(led_thread != RT_NULL)
|
||||||
|
rt_thread_startup(led_thread);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
int rt_application_init()
|
||||||
|
{
|
||||||
|
rt_thread_t init_thread;
|
||||||
|
init_thread = rt_thread_create("init", rt_init_thread_entry, RT_NULL, 2048,
|
||||||
|
(RT_THREAD_PRIORITY_MAX / 8 * 2), 20);
|
||||||
|
if(init_thread != RT_NULL)
|
||||||
|
rt_thread_startup(init_thread);
|
||||||
|
|
||||||
|
#ifdef RT_USING_LED
|
||||||
|
start_led_thread();
|
||||||
|
#endif
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,90 @@
|
||||||
|
/*
|
||||||
|
* File : startup.c
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006, RT-Thread Develop Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2011-01-13 weety first version
|
||||||
|
* 2015-04-21 ArdaFu Using init componment module
|
||||||
|
* 2015-04-27 ArdaFu Port bsp from at91sam9260 to asm9260t
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <rthw.h>
|
||||||
|
#include <rtthread.h>
|
||||||
|
#include "board.h"
|
||||||
|
|
||||||
|
extern void rt_application_init(void);
|
||||||
|
|
||||||
|
#if defined(__CC_ARM)
|
||||||
|
extern int Image$$ER_ZI$$ZI$$Limit;
|
||||||
|
#define HEAP_BEGIN (&Image$$ER_ZI$$ZI$$Limit)
|
||||||
|
#elif(defined(__GNUC__))
|
||||||
|
extern unsigned char __bss_end__;
|
||||||
|
#define HEAP_BEGIN (&__bss_end__)
|
||||||
|
#elif(defined(__ICCARM__))
|
||||||
|
#pragma section = ".noinit"
|
||||||
|
#define HEAP_BEGIN (__section_end(".noinit"))
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define HEAP_END (0x22000000)
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This function will startup RT-Thread RTOS.
|
||||||
|
*/
|
||||||
|
static void rtthread_startup(void)
|
||||||
|
{
|
||||||
|
/* initialize board */
|
||||||
|
rt_hw_board_init();
|
||||||
|
|
||||||
|
/* show version */
|
||||||
|
rt_show_version();
|
||||||
|
|
||||||
|
#ifdef RT_USING_HEAP
|
||||||
|
rt_system_heap_init((void *)HEAP_BEGIN, (void *)HEAP_END);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* initialize scheduler system */
|
||||||
|
rt_system_scheduler_init();
|
||||||
|
/* initialize system timer*/
|
||||||
|
rt_system_timer_init();
|
||||||
|
/* initialize application */
|
||||||
|
rt_application_init();
|
||||||
|
|
||||||
|
/* initialize timer thread */
|
||||||
|
rt_system_timer_thread_init();
|
||||||
|
|
||||||
|
/* initialize idle thread */
|
||||||
|
rt_thread_idle_init();
|
||||||
|
|
||||||
|
/* start scheduler */
|
||||||
|
rt_system_scheduler_start();
|
||||||
|
|
||||||
|
/* never reach here */
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
int main(void)
|
||||||
|
{
|
||||||
|
/* disable interrupt first */
|
||||||
|
rt_hw_interrupt_disable();
|
||||||
|
|
||||||
|
/* startup RT-Thread RTOS */
|
||||||
|
rtthread_startup();
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,21 @@
|
||||||
|
Import('RTT_ROOT')
|
||||||
|
Import('rtconfig')
|
||||||
|
from building import *
|
||||||
|
|
||||||
|
cwd = os.path.join(str(Dir('#')), 'drivers')
|
||||||
|
|
||||||
|
# add the general drvers.
|
||||||
|
src = Split("""
|
||||||
|
board.c
|
||||||
|
usart.c
|
||||||
|
""")
|
||||||
|
|
||||||
|
# add Ethernet drvers.
|
||||||
|
if GetDepend('RT_USING_LED'):
|
||||||
|
src += ['led.c']
|
||||||
|
|
||||||
|
CPPPATH = [cwd]
|
||||||
|
|
||||||
|
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
|
||||||
|
|
||||||
|
Return('group')
|
||||||
|
|
@ -0,0 +1,90 @@
|
||||||
|
/*
|
||||||
|
* File : board.c
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006 - 2009 RT-Thread Develop Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2011-01-13 weety first version
|
||||||
|
* 2015-05-02 ArdaFu Port from AT91SAM9260 BSP
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <rtthread.h>
|
||||||
|
#include <rthw.h>
|
||||||
|
#include <timer0.h>
|
||||||
|
#include "board.h"
|
||||||
|
#include <mmu.h>
|
||||||
|
#include "interrupt.h"
|
||||||
|
|
||||||
|
extern void rt_hw_interrupt_init(void);
|
||||||
|
extern void rt_hw_clock_init(void);
|
||||||
|
extern void rt_hw_uart_init(void);
|
||||||
|
|
||||||
|
static struct mem_desc hw_mem_desc[] =
|
||||||
|
{
|
||||||
|
{ 0x00000000, 0xFFFFFFFF, 0x00000000, RW_NCNB },/* None cached for 4G memory */
|
||||||
|
// visual start, visual end, phy start , props
|
||||||
|
{ 0x00000000, 0x000FFFFF, 0x20000000, RW_CB }, /* ISR Vector table */
|
||||||
|
{ 0x00200000, 0x00001FFF, 0x40000000, RW_CB }, /* 8K cached SRAM 0/1 */
|
||||||
|
{ 0x20000000, 0x21FFFFFF, 0x20000000, RW_CB }, /* 32M cached SDRAM */
|
||||||
|
{ 0x90000000, 0x90001FFF, 0x40000000, RW_NCNB },/* 4K SRAM0 + 4k SRAM1 */
|
||||||
|
{ 0xA0000000, 0xA1FFFFFF, 0x20000000, RW_NCNB },/* 32M none-cached SDRAM */
|
||||||
|
};
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This function will handle rtos timer
|
||||||
|
*/
|
||||||
|
static void rt_systick_handler(int vector, void *param)
|
||||||
|
{
|
||||||
|
uint32_t ir = inl(HW_TIMER0_IR);
|
||||||
|
if (ir & 1UL)
|
||||||
|
rt_tick_increase();
|
||||||
|
outl(ir, REG_SET(HW_TIMER0_IR));
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This function will init pit for system ticks
|
||||||
|
*/
|
||||||
|
static void rt_hw_timer_init()
|
||||||
|
{
|
||||||
|
hw_timer0_init();
|
||||||
|
/* install interrupt handler */
|
||||||
|
rt_hw_interrupt_install(INT_TIMER0, rt_systick_handler, RT_NULL, "SysTick");
|
||||||
|
rt_hw_interrupt_umask(INT_TIMER0);
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This function will init at91sam9260 board
|
||||||
|
*/
|
||||||
|
void rt_hw_board_init(void)
|
||||||
|
{
|
||||||
|
/* initialize mmu */
|
||||||
|
rt_hw_mmu_init(hw_mem_desc, sizeof(hw_mem_desc)/sizeof(hw_mem_desc[0]));
|
||||||
|
/* initialize hardware interrupt */
|
||||||
|
rt_hw_interrupt_init();
|
||||||
|
|
||||||
|
/* initialize the system clock */
|
||||||
|
//rt_hw_clock_init(); //set each pll etc.
|
||||||
|
|
||||||
|
/* initialize uart */
|
||||||
|
rt_hw_uart_init();
|
||||||
|
rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
|
||||||
|
|
||||||
|
/* initialize timer0 */
|
||||||
|
rt_hw_timer_init();
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,32 @@
|
||||||
|
/*
|
||||||
|
* File : board.h
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006, RT-Thread Develop Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2011-01-13 weety add board.h to this bsp
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __BOARD_H__
|
||||||
|
#define __BOARD_H__
|
||||||
|
|
||||||
|
#include <asm9260t.h>
|
||||||
|
|
||||||
|
void rt_hw_board_init(void);
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,47 @@
|
||||||
|
/*
|
||||||
|
* File : led.c
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006-2015, RT-Thread Develop Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2015-04-14 ArdaFu first version
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <rtthread.h>
|
||||||
|
#include <board.h>
|
||||||
|
#include "led.h"
|
||||||
|
#include "gpio.h"
|
||||||
|
|
||||||
|
//ASM9260T EVK pin 16-7 LED0, 0: ON, 1 : OFF
|
||||||
|
void led_init(void)
|
||||||
|
{
|
||||||
|
// enable IOCONFIG GPIO
|
||||||
|
outl(((1UL<<25) | (1UL<<4)) , REG_SET(HW_AHBCLKCTRL0));
|
||||||
|
HW_SetPinMux(16,7,0);
|
||||||
|
HW_GpioSetDir(16,7,1);
|
||||||
|
}
|
||||||
|
|
||||||
|
void led_on(int num)
|
||||||
|
{
|
||||||
|
HW_GpioClrVal(16, 7 );
|
||||||
|
}
|
||||||
|
|
||||||
|
void led_off(int num)
|
||||||
|
{
|
||||||
|
HW_GpioSetVal(16, 7 );
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,32 @@
|
||||||
|
/*
|
||||||
|
* File : led.h
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2011-01-13 weety first version
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __LED_H__
|
||||||
|
#define __LED_H__
|
||||||
|
|
||||||
|
void led_init(void);
|
||||||
|
void led_on(int num);
|
||||||
|
void led_off(int num);
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,247 @@
|
||||||
|
/*
|
||||||
|
* File : usart.c
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006-2015, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2011-01-13 weety first version
|
||||||
|
* 2013-07-21 weety using serial component
|
||||||
|
* 2015-05-02 ArdaFu Port from AT91SAM9260 BSP
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <rtthread.h>
|
||||||
|
#include <rthw.h>
|
||||||
|
#include <rtdevice.h>
|
||||||
|
#include "interrupt.h"
|
||||||
|
#include <asm9260t.h>
|
||||||
|
#include "gpio.h"
|
||||||
|
|
||||||
|
#include "uart.h"
|
||||||
|
|
||||||
|
typedef struct
|
||||||
|
{
|
||||||
|
HW_USART_TypeDef *port;
|
||||||
|
int irq;
|
||||||
|
} asm_uart_t;
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This function will handle serial
|
||||||
|
*/
|
||||||
|
void rt_asm_usart_handler(int vector, void *param)
|
||||||
|
{
|
||||||
|
rt_uint32_t status;
|
||||||
|
asm_uart_t *uart;
|
||||||
|
rt_device_t dev = (rt_device_t)param;
|
||||||
|
uart = (asm_uart_t *)dev->user_data;
|
||||||
|
status = uart->port->INTR[R_VAL];
|
||||||
|
|
||||||
|
if(!(status & (ASM_UART_INTR_RXIS | ASM_UART_INTR_RTIS)))
|
||||||
|
return;
|
||||||
|
uart->port->INTR[R_CLR] = ASM_UART_INTR_RXIS|ASM_UART_INTR_RTIS;
|
||||||
|
//rt_interrupt_enter();
|
||||||
|
rt_hw_serial_isr((struct rt_serial_device *)dev, RT_SERIAL_EVENT_RX_IND);
|
||||||
|
//rt_interrupt_leave();
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
* UART device in RT-Thread
|
||||||
|
*/
|
||||||
|
static rt_err_t asm_usart_configure(struct rt_serial_device *serial,
|
||||||
|
struct serial_configure *cfg)
|
||||||
|
{
|
||||||
|
asm_uart_t *uart;
|
||||||
|
|
||||||
|
RT_ASSERT(serial != RT_NULL);
|
||||||
|
RT_ASSERT(cfg != RT_NULL);
|
||||||
|
uart = (asm_uart_t *)serial->parent.user_data;
|
||||||
|
|
||||||
|
Hw_UartDisable(uart->port);
|
||||||
|
|
||||||
|
Hw_UartReset(uart->port);
|
||||||
|
|
||||||
|
Hw_UartConfig(uart->port, cfg->baud_rate, cfg->data_bits,
|
||||||
|
cfg->stop_bits, cfg->parity);
|
||||||
|
|
||||||
|
Hw_UartEnable(uart->port);
|
||||||
|
|
||||||
|
return RT_EOK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_err_t asm_usart_control(struct rt_serial_device *serial,
|
||||||
|
int cmd, void *arg)
|
||||||
|
{
|
||||||
|
asm_uart_t* uart;
|
||||||
|
|
||||||
|
RT_ASSERT(serial != RT_NULL);
|
||||||
|
uart = (asm_uart_t *)serial->parent.user_data;
|
||||||
|
|
||||||
|
switch (cmd)
|
||||||
|
{
|
||||||
|
case RT_DEVICE_CTRL_CLR_INT:
|
||||||
|
/* disable rx irq */
|
||||||
|
rt_hw_interrupt_mask(uart->irq);
|
||||||
|
break;
|
||||||
|
case RT_DEVICE_CTRL_SET_INT:
|
||||||
|
/* enable rx irq */
|
||||||
|
rt_hw_interrupt_umask(uart->irq);
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
return RT_EOK;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
static int asm_usart_putc(struct rt_serial_device *serial, char c)
|
||||||
|
{
|
||||||
|
//rt_uint32_t level;
|
||||||
|
asm_uart_t *uart = serial->parent.user_data;
|
||||||
|
|
||||||
|
while ((uart->port->STAT[R_VAL] & ASM_UART_STAT_TXFF));
|
||||||
|
uart->port->DATA[R_VAL] = c;
|
||||||
|
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int asm_usart_getc(struct rt_serial_device *serial)
|
||||||
|
{
|
||||||
|
asm_uart_t *uart = serial->parent.user_data;
|
||||||
|
|
||||||
|
if (uart->port->STAT[R_VAL] & ASM_UART_STAT_RXFE)
|
||||||
|
return -1;
|
||||||
|
return uart->port->DATA[R_VAL] & 0xff;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct rt_uart_ops asm_usart_ops =
|
||||||
|
{
|
||||||
|
asm_usart_configure,
|
||||||
|
asm_usart_control,
|
||||||
|
asm_usart_putc,
|
||||||
|
asm_usart_getc,
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
#if defined(RT_USING_UART0)
|
||||||
|
static struct rt_serial_device serial0;
|
||||||
|
asm_uart_t uart0 =
|
||||||
|
{
|
||||||
|
USART0,
|
||||||
|
INT_UART0
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(RT_USING_UART3)
|
||||||
|
static struct rt_serial_device serial3;
|
||||||
|
asm_uart_t uart3 =
|
||||||
|
{
|
||||||
|
USART3,
|
||||||
|
INT_UART3
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(RT_USING_UART4)
|
||||||
|
static struct rt_serial_device serial4;
|
||||||
|
asm_uart_t uart4 =
|
||||||
|
{
|
||||||
|
USART4,
|
||||||
|
INT_UART4
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//USART0 PINS TX=GP14_0:5 , RX=GP14_1:5
|
||||||
|
//USART3 PINS TX=GP8_6:2 , RX=GP8_7:2
|
||||||
|
//USART4 PINS TX=GP3_0:2 , RX=GP3_1:2
|
||||||
|
|
||||||
|
void asm_usart_gpio_init(void)
|
||||||
|
{
|
||||||
|
// enable IOCONFIG GPIO
|
||||||
|
outl(((1UL<<25) | (1UL<<4)) ,REG_SET(HW_AHBCLKCTRL0));
|
||||||
|
#ifdef RT_USING_UART0
|
||||||
|
HW_SetPinMux(14, 0, 5);
|
||||||
|
HW_SetPinMux(14, 1, 5);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef RT_USING_UART3
|
||||||
|
HW_SetPinMux(8, 6, 2);
|
||||||
|
HW_SetPinMux(8, 7, 2);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef RT_USING_UART4
|
||||||
|
HW_SetPinMux(3, 0, 2);
|
||||||
|
HW_SetPinMux(3, 1, 2);
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
void asm_serial_config_set_default(struct rt_serial_device* serial)
|
||||||
|
{
|
||||||
|
serial->ops = &asm_usart_ops;
|
||||||
|
|
||||||
|
serial->config.baud_rate = BAUD_RATE_115200;
|
||||||
|
serial->config.bit_order = BIT_ORDER_LSB;
|
||||||
|
serial->config.data_bits = DATA_BITS_8;
|
||||||
|
serial->config.parity = PARITY_NONE;
|
||||||
|
serial->config.stop_bits = STOP_BITS_1;
|
||||||
|
serial->config.invert = NRZ_NORMAL;
|
||||||
|
serial->config.bufsz = RT_SERIAL_RB_BUFSZ;
|
||||||
|
}
|
||||||
|
#define DRV_REG_OPS (RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM)
|
||||||
|
/**
|
||||||
|
* This function will handle init uart
|
||||||
|
*/
|
||||||
|
int rt_hw_uart_init(void)
|
||||||
|
{
|
||||||
|
asm_usart_gpio_init();
|
||||||
|
|
||||||
|
#if defined(RT_USING_UART0)
|
||||||
|
Hw_UartInit(0);
|
||||||
|
asm_serial_config_set_default(&serial0);
|
||||||
|
|
||||||
|
/* register uart device */
|
||||||
|
rt_hw_serial_register(&serial0, "uart0", DRV_REG_OPS, &uart0);
|
||||||
|
rt_hw_interrupt_install(uart0.irq, rt_asm_usart_handler,
|
||||||
|
(void *)&(serial0.parent), "UART0");
|
||||||
|
rt_hw_interrupt_umask(uart0.irq);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(RT_USING_UART3)
|
||||||
|
Hw_UartInit(3);
|
||||||
|
asm_serial_config_set_default(&serial3);
|
||||||
|
|
||||||
|
/* register uart device */
|
||||||
|
rt_hw_serial_register(&serial3, "uart3", DRV_REG_OPS, &uart3);
|
||||||
|
rt_hw_interrupt_install(uart3.irq, rt_asm_usart_handler,
|
||||||
|
(void *)&(serial3.parent), "UART3");
|
||||||
|
rt_hw_interrupt_umask(uart3.irq);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(RT_USING_UART4)
|
||||||
|
Hw_UartInit(4);
|
||||||
|
asm_serial_config_set_default(&serial4);
|
||||||
|
|
||||||
|
/* register uart device */
|
||||||
|
rt_hw_serial_register(&serial4, "uart4", DRV_REG_OPS, &uart4);
|
||||||
|
rt_hw_interrupt_install(uart4.irq, rt_asm_usart_handler,
|
||||||
|
(void *)&(serial4.parent), "UART4");
|
||||||
|
rt_hw_interrupt_umask(uart4.irq);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
INIT_BOARD_EXPORT(rt_hw_uart_init);
|
||||||
|
|
@ -0,0 +1,71 @@
|
||||||
|
#------------------------------------------------
|
||||||
|
# SDRAM initialization script for the ASM9260T
|
||||||
|
#------------------------------------------------
|
||||||
|
|
||||||
|
define __setup_PLL
|
||||||
|
echo "Enabling PLL for CPU" \n
|
||||||
|
|
||||||
|
# outl(1<<2, REG_SET(HW_AHBCLKCTRL0));
|
||||||
|
set *0x80040024 = 0x00000004
|
||||||
|
# outl(1<<8, REG_SET(HW_AHBCLKCTRL1));
|
||||||
|
set *0x80040034 = 0x00000100
|
||||||
|
# outl(3<<9, REG_SET(HW_AHBCLKCTRL0));
|
||||||
|
set *0x80040024 = 0x00000600
|
||||||
|
# outl(inl(HW_PDRUNCFG)&0xFFFFFFFA, HW_PDRUNCFG);
|
||||||
|
set *0x80040238 = 0x00000770
|
||||||
|
# outl(2, HW_CPUCLKDIV);
|
||||||
|
set *0x8004017C = 0x00000002
|
||||||
|
# outl(2, HW_SYSAHBCLKDIV);
|
||||||
|
set *0x80040180 = 0x00000002
|
||||||
|
# outl(480, HW_SYSPLLCTRL);
|
||||||
|
set *0x80040100 = 0x000001E0
|
||||||
|
# __delay(50)
|
||||||
|
set $i = 0
|
||||||
|
while $i != 500
|
||||||
|
set $i += 1
|
||||||
|
end
|
||||||
|
# outl(1, HW_MAINCLKSEL);
|
||||||
|
set *0x80040120 = 0x00000001
|
||||||
|
# outl(0, HW_MAINCLKUEN);
|
||||||
|
set *0x80040124 = 0x00000000
|
||||||
|
# outl(1, HW_MAINCLKUEN);
|
||||||
|
set *0x80040124 = 0x00000001
|
||||||
|
end
|
||||||
|
|
||||||
|
define __setup_SDRAM
|
||||||
|
echo "Enabling on-chip SDRAM" \n
|
||||||
|
|
||||||
|
# outl((1<<6), REG_SET(HW_AHBCLKCTRL0));
|
||||||
|
set *0x80040024 = 0x00000040
|
||||||
|
# outl(0x00001188, HW_EMI_SCONR);
|
||||||
|
set *0x80700000 = 0x00001188
|
||||||
|
# outl(0x000a0500, HW_EMI_CTRL);
|
||||||
|
set *0x8004034c = 0x000a0500
|
||||||
|
# outl(0x20000000, HW_EMI_SCSLR2_LOW);
|
||||||
|
set *0x8070001c = 0x20000000
|
||||||
|
# outl(0x0000000c, HW_EMI_SMSKR2);
|
||||||
|
set *0x8070005c = 0x0000000c
|
||||||
|
# outl(0x024996d9, HW_EMI_STMG0R);
|
||||||
|
set *0x80700004 = 0x024996d9
|
||||||
|
# outl(0x00542b4f, HW_EMI_SMTMGR_SET0);
|
||||||
|
set *0x80700094 = 0x00542b4f
|
||||||
|
# outl(0x00003288, HW_EMI_SCTLR);
|
||||||
|
set *0x8070000c = 0x00003288
|
||||||
|
end
|
||||||
|
|
||||||
|
# Step1: Connect to the J-Link gdb server
|
||||||
|
define reset
|
||||||
|
#target remote localhost:2331
|
||||||
|
monitor reset
|
||||||
|
|
||||||
|
# Step2: Reset peripheral (RSTC_CR)
|
||||||
|
echo "------- Prepare for debug ASM9260T -------" \n
|
||||||
|
__setup_PLL
|
||||||
|
__setup_SDRAM
|
||||||
|
|
||||||
|
# Step3: Load file(eg. getting-started project)
|
||||||
|
load
|
||||||
|
|
||||||
|
mon reg pc=0x20000000
|
||||||
|
#info reg
|
||||||
|
end
|
||||||
|
|
@ -0,0 +1,61 @@
|
||||||
|
//------------------------------------------------
|
||||||
|
// SDRAM initialization script for the ASM9260T
|
||||||
|
//------------------------------------------------
|
||||||
|
|
||||||
|
FUNC void __setup_PLL()
|
||||||
|
{
|
||||||
|
printf( "Enabling PLL for CPU\n");
|
||||||
|
|
||||||
|
// outl(1<<2, REG_SET(HW_AHBCLKCTRL0));
|
||||||
|
_WDWORD(0x80040024, 0x00000004);
|
||||||
|
// outl(1<<8, REG_SET(HW_AHBCLKCTRL1));
|
||||||
|
_WDWORD(0x80040034, 0x00000100);
|
||||||
|
// outl(3<<9, REG_SET(HW_AHBCLKCTRL0));
|
||||||
|
_WDWORD(0x80040024, 0x00000600);
|
||||||
|
// outl(inl(HW_PDRUNCFG)&0xFFFFFFFA, HW_PDRUNCFG);
|
||||||
|
_WDWORD(0x80040238, 0x00000770);
|
||||||
|
// outl(2, HW_CPUCLKDIV);
|
||||||
|
_WDWORD(0x8004017C, 0x00000002);
|
||||||
|
// outl(2, HW_SYSAHBCLKDIV);
|
||||||
|
_WDWORD(0x80040180, 0x00000002);
|
||||||
|
// outl(480, HW_SYSPLLCTRL);
|
||||||
|
_WDWORD(0x80040100, 0x000001E0);
|
||||||
|
_sleep_(500);
|
||||||
|
// outl(1, HW_MAINCLKSEL);
|
||||||
|
_WDWORD(0x80040120, 0x00000001);
|
||||||
|
// outl(0, HW_MAINCLKUEN);
|
||||||
|
_WDWORD(0x80040124, 0x00000000);
|
||||||
|
// outl(1, HW_MAINCLKUEN);
|
||||||
|
_WDWORD(0x80040124, 0x00000001);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
FUNC void __setup_SDRAM()
|
||||||
|
{
|
||||||
|
printf( "Enabling on-chip SDRAM\n");
|
||||||
|
|
||||||
|
// outl((1<<6), REG_SET(HW_AHBCLKCTRL0));
|
||||||
|
_WDWORD(0x80040024, 0x00000040);
|
||||||
|
// outl(0x00001188, HW_EMI_SCONR);
|
||||||
|
_WDWORD(0x80700000, 0x00001188);
|
||||||
|
// outl(0x000a0500, HW_EMI_CTRL);
|
||||||
|
_WDWORD(0x8004034c, 0x000a0500);
|
||||||
|
// outl(0x20000000, HW_EMI_SCSLR2_LOW);
|
||||||
|
_WDWORD(0x8070001c, 0x20000000);
|
||||||
|
// outl(0x0000000c, HW_EMI_SMSKR2);
|
||||||
|
_WDWORD(0x8070005c, 0x0000000c);
|
||||||
|
// outl(0x024996d9, HW_EMI_STMG0R);
|
||||||
|
_WDWORD(0x80700004, 0x024996d9);
|
||||||
|
// outl(0x00542b4f, HW_EMI_SMTMGR_SET0);
|
||||||
|
_WDWORD(0x80700094, 0x00542b4f);
|
||||||
|
// outl(0x00003288, HW_EMI_SCTLR);
|
||||||
|
_WDWORD(0x8070000c, 0x00003288);
|
||||||
|
}
|
||||||
|
|
||||||
|
printf( "------- Prepare for debug ASM9260T -------");
|
||||||
|
__setup_PLL();
|
||||||
|
__setup_SDRAM();
|
||||||
|
DEBUG_CLOCK = 2000000;
|
||||||
|
LOAD Objects\\template.axf INCREMENTAL
|
||||||
|
PC = 0x20000000;
|
||||||
|
g,main
|
||||||
|
|
@ -0,0 +1,59 @@
|
||||||
|
//------------------------------------------------
|
||||||
|
// SDRAM initialization script for the ASM9260T
|
||||||
|
//------------------------------------------------
|
||||||
|
|
||||||
|
__setup_PLL()
|
||||||
|
{
|
||||||
|
__message "Enabling PLL for CPU\n";
|
||||||
|
|
||||||
|
// outl(1<<2, REG_SET(HW_AHBCLKCTRL0));
|
||||||
|
__writeMemory32(0x00000004, 0x80040024, "Memory");
|
||||||
|
// outl(1<<8, REG_SET(HW_AHBCLKCTRL1));
|
||||||
|
__writeMemory32(0x00000100, 0x80040034, "Memory");
|
||||||
|
// outl(3<<9, REG_SET(HW_AHBCLKCTRL0));
|
||||||
|
__writeMemory32(0x00000600, 0x80040024, "Memory");
|
||||||
|
// outl(inl(HW_PDRUNCFG)&0xFFFFFFFA, HW_PDRUNCFG);
|
||||||
|
__writeMemory32(0x00000770, 0x80040238, "Memory");
|
||||||
|
// outl(2, HW_CPUCLKDIV);
|
||||||
|
__writeMemory32(0x00000002, 0x8004017C, "Memory");
|
||||||
|
// outl(2, HW_SYSAHBCLKDIV);
|
||||||
|
__writeMemory32(0x00000002, 0x80040180, "Memory");
|
||||||
|
// outl(480, HW_SYSPLLCTRL);
|
||||||
|
__writeMemory32(0x000001E0, 0x80040100, "Memory");
|
||||||
|
__delay(50);
|
||||||
|
// outl(1, HW_MAINCLKSEL);
|
||||||
|
__writeMemory32(0x00000001, 0x80040120, "Memory");
|
||||||
|
// outl(0, HW_MAINCLKUEN);
|
||||||
|
__writeMemory32(0x00000000, 0x80040124, "Memory");
|
||||||
|
// outl(1, HW_MAINCLKUEN);
|
||||||
|
__writeMemory32(0x00000001, 0x80040124, "Memory");
|
||||||
|
}
|
||||||
|
|
||||||
|
__setup_SDRAM()
|
||||||
|
{
|
||||||
|
__message "Enabling on-chip SDRAM\n";
|
||||||
|
|
||||||
|
// outl((1<<6), REG_SET(HW_AHBCLKCTRL0));
|
||||||
|
__writeMemory32(0x00000040, 0x80040024, "Memory");
|
||||||
|
// outl(0x00001188, HW_EMI_SCONR);
|
||||||
|
__writeMemory32(0x00001188, 0x80700000, "Memory");
|
||||||
|
// outl(0x000a0500, HW_EMI_CTRL);
|
||||||
|
__writeMemory32(0x000a0500, 0x8004034c, "Memory");
|
||||||
|
// outl(0x20000000, HW_EMI_SCSLR2_LOW);
|
||||||
|
__writeMemory32(0x20000000, 0x8070001c, "Memory");
|
||||||
|
// outl(0x0000000c, HW_EMI_SMSKR2);
|
||||||
|
__writeMemory32(0x0000000c, 0x8070005c, "Memory");
|
||||||
|
// outl(0x024996d9, HW_EMI_STMG0R);
|
||||||
|
__writeMemory32(0x024996d9, 0x80700004, "Memory");
|
||||||
|
// outl(0x00542b4f, HW_EMI_SMTMGR_SET0);
|
||||||
|
__writeMemory32(0x00542b4f, 0x80700094, "Memory");
|
||||||
|
// outl(0x00003288, HW_EMI_SCTLR);
|
||||||
|
__writeMemory32(0x00003288, 0x8070000c, "Memory");
|
||||||
|
}
|
||||||
|
|
||||||
|
execUserPreload()
|
||||||
|
{
|
||||||
|
__message "------- Prepare for debug ASM9260T -------";
|
||||||
|
__setup_PLL();
|
||||||
|
__setup_SDRAM();
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,55 @@
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// Linker scatter for running in external SDRAM on the AT91SAM9260
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
//
|
||||||
|
// Define a memory region that covers the entire 4 GB addressible space of the
|
||||||
|
// processor.
|
||||||
|
//
|
||||||
|
define memory mem with size = 4G;
|
||||||
|
|
||||||
|
//
|
||||||
|
// Define a region for the on-chip flash. size = 2MB
|
||||||
|
//
|
||||||
|
define region FLASH = mem:[from 0x20000000 to 0x201FFFFF];
|
||||||
|
|
||||||
|
//
|
||||||
|
// Define a region for the on-chip SRAM. size = 30MB
|
||||||
|
//
|
||||||
|
define region SRAM = mem:[from 0x20200000 to 0x21FFFFFF];
|
||||||
|
|
||||||
|
//
|
||||||
|
// Indicate that the read/write values should be initialized by copying from
|
||||||
|
// flash.
|
||||||
|
//
|
||||||
|
initialize by copy { readwrite };
|
||||||
|
|
||||||
|
//
|
||||||
|
// Indicate that the noinit values should be left alone. This includes the
|
||||||
|
// stack, which if initialized will destroy the return address from the
|
||||||
|
// initialization code, causing the processor to branch to zero and fault.
|
||||||
|
//
|
||||||
|
do not initialize { section .noinit };
|
||||||
|
|
||||||
|
//
|
||||||
|
// Place the interrupt vectors at the start of flash.
|
||||||
|
//
|
||||||
|
place at start of FLASH { readonly section .intvec };
|
||||||
|
|
||||||
|
//
|
||||||
|
// Place the remainder of the read-only items into flash.
|
||||||
|
//
|
||||||
|
place in FLASH { readonly };
|
||||||
|
|
||||||
|
//
|
||||||
|
// Place the RAM vector table at the start of SRAM.
|
||||||
|
//
|
||||||
|
place at start of SRAM { section VTABLE };
|
||||||
|
|
||||||
|
//
|
||||||
|
// Place all read/write items into SRAM.
|
||||||
|
//
|
||||||
|
place in SRAM { readwrite};
|
||||||
|
keep { section FSymTab };
|
||||||
|
keep { section VSymTab };
|
||||||
|
keep { section .rti_fn* };
|
||||||
|
|
@ -0,0 +1,90 @@
|
||||||
|
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
|
||||||
|
OUTPUT_ARCH(arm)
|
||||||
|
ENTRY(entry)
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
. = 0x20000000;
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
.text :
|
||||||
|
{
|
||||||
|
*(.init)
|
||||||
|
*(.text)
|
||||||
|
*(.gnu.linkonce.t*)
|
||||||
|
|
||||||
|
/* section information for finsh shell */
|
||||||
|
. = ALIGN(4);
|
||||||
|
__fsymtab_start = .;
|
||||||
|
KEEP(*(FSymTab))
|
||||||
|
__fsymtab_end = .;
|
||||||
|
. = ALIGN(4);
|
||||||
|
__vsymtab_start = .;
|
||||||
|
KEEP(*(VSymTab))
|
||||||
|
__vsymtab_end = .;
|
||||||
|
. = ALIGN(4);
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
__rt_init_start = .;
|
||||||
|
KEEP(*(SORT(.rti_fn*)))
|
||||||
|
__rt_init_end = .;
|
||||||
|
. = ALIGN(4);
|
||||||
|
|
||||||
|
/* section information for modules */
|
||||||
|
. = ALIGN(4);
|
||||||
|
__rtmsymtab_start = .;
|
||||||
|
KEEP(*(RTMSymTab))
|
||||||
|
__rtmsymtab_end = .;
|
||||||
|
}
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
.rodata : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r*) *(.eh_frame) }
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
.ctors :
|
||||||
|
{
|
||||||
|
PROVIDE(__ctors_start__ = .);
|
||||||
|
KEEP(*(SORT(.ctors.*)))
|
||||||
|
KEEP(*(.ctors))
|
||||||
|
PROVIDE(__ctors_end__ = .);
|
||||||
|
}
|
||||||
|
|
||||||
|
.dtors :
|
||||||
|
{
|
||||||
|
PROVIDE(__dtors_start__ = .);
|
||||||
|
KEEP(*(SORT(.dtors.*)))
|
||||||
|
KEEP(*(.dtors))
|
||||||
|
PROVIDE(__dtors_end__ = .);
|
||||||
|
}
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
.data :
|
||||||
|
{
|
||||||
|
*(.data)
|
||||||
|
*(.data.*)
|
||||||
|
*(.gnu.linkonce.d*)
|
||||||
|
}
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
.nobss : { *(.nobss) }
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
__bss_start__ = .;
|
||||||
|
.bss : { *(.bss)}
|
||||||
|
__bss_end__ = .;
|
||||||
|
|
||||||
|
/* stabs debugging sections. */
|
||||||
|
.stab 0 : { *(.stab) }
|
||||||
|
.stabstr 0 : { *(.stabstr) }
|
||||||
|
.stab.excl 0 : { *(.stab.excl) }
|
||||||
|
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||||
|
.stab.index 0 : { *(.stab.index) }
|
||||||
|
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||||
|
.comment 0 : { *(.comment) }
|
||||||
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||||
|
.debug_info 0 : { *(.debug_info) }
|
||||||
|
.debug_line 0 : { *(.debug_line) }
|
||||||
|
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||||
|
.debug_aranges 0 : { *(.debug_aranges) }
|
||||||
|
|
||||||
|
_end = .;
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,27 @@
|
||||||
|
;*------------------------------------------------------------------------------
|
||||||
|
;* Linker scatter for running in external SDRAM on the ASM9260T
|
||||||
|
;*----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
Load_region 0x20000000 0x00200000
|
||||||
|
{
|
||||||
|
|
||||||
|
Fixed_region 0x20000000
|
||||||
|
{
|
||||||
|
* (RESET +First)
|
||||||
|
.ANY (+RO +RW)
|
||||||
|
}
|
||||||
|
|
||||||
|
ARM_LIB_HEAP +0 EMPTY 0x1000
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
||||||
|
ARM_LIB_STACK +0 EMPTY 0x1000
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
||||||
|
; Application ZI data (.bss)
|
||||||
|
ER_ZI +0
|
||||||
|
{
|
||||||
|
* (+ZI)
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,12 @@
|
||||||
|
Import('RTT_ROOT')
|
||||||
|
Import('rtconfig')
|
||||||
|
from building import *
|
||||||
|
|
||||||
|
cwd = GetCurrentDir()
|
||||||
|
CPPPATH = [cwd]
|
||||||
|
|
||||||
|
# The set of source files associated with this SConscript file.
|
||||||
|
src = Glob('*.c')
|
||||||
|
|
||||||
|
group = DefineGroup('platform', src, depend = [''], CPPPATH = CPPPATH)
|
||||||
|
Return('group')
|
||||||
|
|
@ -0,0 +1,670 @@
|
||||||
|
#ifndef __ASM9260T_REGS_H__
|
||||||
|
#define __ASM9260T_REGS_H__
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
|
||||||
|
typedef volatile unsigned char *VP8;
|
||||||
|
typedef volatile unsigned short *VP16;
|
||||||
|
typedef volatile unsigned long *VP32;
|
||||||
|
|
||||||
|
#define __I volatile const /*!< Defines 'read only' permissions */
|
||||||
|
#define __O volatile /*!< Defines 'write only' permissions */
|
||||||
|
#define __IO volatile /*!< Defines 'read / write' permissions */
|
||||||
|
|
||||||
|
#define outb(v, r) do{*((VP8)(r))=(v);}while(0)
|
||||||
|
#define outw(v, r) do{*((VP16)(r))=(v);}while(0)
|
||||||
|
#define outl(v, r) do{*((VP32)(r))=(v);}while(0)
|
||||||
|
|
||||||
|
#define inb(r) (*((VP8)(r)))
|
||||||
|
#define inw(r) (*((VP16)(r)))
|
||||||
|
#define inl(r) (*((VP32)(r)))
|
||||||
|
|
||||||
|
#define REG_VAL(r) (((unsigned long)(r))+0x00)
|
||||||
|
#define REG_SET(r) (((unsigned long)(r))+0x04)
|
||||||
|
#define REG_CLR(r) (((unsigned long)(r))+0x08)
|
||||||
|
#define REG_TOG(r) (((unsigned long)(r))+0x0C)
|
||||||
|
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
// SYSTEM CONFIG
|
||||||
|
#define HW_PRESETCTRL0 0x80040000
|
||||||
|
#define HW_PRESETCTRL1 0x80040010
|
||||||
|
#define HW_AHBCLKCTRL0 0x80040020
|
||||||
|
#define HW_AHBCLKCTRL1 0x80040030
|
||||||
|
#define HW_SYSTCKCAL 0x80040040
|
||||||
|
#define HW_SYSPLLCTRL 0x80040100
|
||||||
|
#define HW_SYSPLLSTAT 0x80040104
|
||||||
|
#define HW_SYSRSTSTAT 0x80040110
|
||||||
|
#define HW_MAINCLKSEL 0x80040120
|
||||||
|
#define HW_MAINCLKUEN 0x80040124
|
||||||
|
#define HW_UARTCLKSEL 0x80040128
|
||||||
|
#define HW_UARTCLKUEN 0x8004012C
|
||||||
|
#define HW_I2S0CLKSEL 0x80040130
|
||||||
|
#define HW_I2S0CLKUEN 0x80040134
|
||||||
|
#define HW_I2S1CLKSEL 0x80040138
|
||||||
|
#define HW_I2S1CLKUEN 0x8004013C
|
||||||
|
#define HW_USBCLKSEL 0x80040140
|
||||||
|
#define HW_USBCLKUEN 0x80040144
|
||||||
|
#define HW_WDTCLKSEL 0x80040160
|
||||||
|
#define HW_WDTCLKUEN 0x80040164
|
||||||
|
#define HW_OUTCLKSEL 0x80040170
|
||||||
|
#define HW_OUTCLKUEN 0x80040174
|
||||||
|
#define HW_CPUCLKDIV 0x8004017C
|
||||||
|
#define HW_SYSAHBCLKDIV 0x80040180
|
||||||
|
#define HW_I2S1_MCLKDIV 0x80040188
|
||||||
|
#define HW_I2S1_SCLKDIV 0x8004018C
|
||||||
|
#define HW_I2S0_MCLKDIV 0x80040190
|
||||||
|
#define HW_I2S0_SCLKDIV 0x80040194
|
||||||
|
#define HW_UART0CLKDIV 0x80040198
|
||||||
|
#define HW_UART1CLKDIV 0x8004019C
|
||||||
|
#define HW_UART2CLKDIV 0x800401A0
|
||||||
|
#define HW_UART3CLKDIV 0x800401A4
|
||||||
|
#define HW_UART4CLKDIV 0x800401A8
|
||||||
|
#define HW_UART5CLKDIV 0x800401AC
|
||||||
|
#define HW_UART6CLKDIV 0x800401B0
|
||||||
|
#define HW_UART7CLKDIV 0x800401B4
|
||||||
|
#define HW_UART8CLKDIV 0x800401B8
|
||||||
|
#define HW_UART9CLKDIV 0x800401BC
|
||||||
|
#define HW_SPI0CLKDIV 0x800401C0
|
||||||
|
#define HW_SPI1CLKDIV 0x800401C4
|
||||||
|
#define HW_QUADSPI0CLKDIV 0x800401C8
|
||||||
|
#define HW_SSP0CLKDIV 0x800401D0
|
||||||
|
#define HW_NANDCLKDIV 0x800401D4
|
||||||
|
#define HW_TRACECLKDIV 0x800401E0
|
||||||
|
#define HW_CAMMCLKDIV 0x800401E8
|
||||||
|
#define HW_WDTCLKDIV 0x800401EC
|
||||||
|
#define HW_USBCLKDIV 0x800401F0
|
||||||
|
#define HW_OUTCLKDIV 0x800401F4
|
||||||
|
#define HW_MACCLKDIV 0x800401F8
|
||||||
|
#define HW_LCDCLKDIV 0x800401FC
|
||||||
|
#define HW_ADCCLKDIV 0x80040200
|
||||||
|
#define HW_PDRUNCFG 0x80040238
|
||||||
|
#define HW_MATRIXPRI0 0x80040300
|
||||||
|
#define HW_MATRIXPRI1 0x80040304
|
||||||
|
#define HW_MATRIXPRI2 0x80040308
|
||||||
|
#define HW_MATRIXPRI3 0x8004030C
|
||||||
|
#define HW_MATRIXPRI4 0x80040310
|
||||||
|
#define HW_MATRIXPRI5 0x80040314
|
||||||
|
#define HW_MATRIXPRI6 0x80040318
|
||||||
|
#define HW_MATRIXPRI7 0x8004031C
|
||||||
|
#define HW_MATRIXPRI8 0x80040320
|
||||||
|
#define HW_MATRIXPRI9 0x80040324
|
||||||
|
#define HW_MATRIXPRI10 0x80040328
|
||||||
|
#define HW_MATRIXPRI11 0x8004032C
|
||||||
|
#define HW_MATRIXPRI12 0x80040330
|
||||||
|
#define HW_MATRIXPRI13 0x80040334
|
||||||
|
#define HW_MATRIXPRI14 0x80040338
|
||||||
|
#define HW_MATRIXPRI15 0x8004033C
|
||||||
|
#define HW_EMI_CTRL 0x8004034C
|
||||||
|
#define HW_RISC_CTRL 0x80040350
|
||||||
|
#define HW_DMA_CTRL 0x80040354
|
||||||
|
#define HW_MACPHY_SEL 0x80040360
|
||||||
|
#define HW_USB_CTRL 0x80040368
|
||||||
|
#define HW_ANA_CTRL 0x80040370
|
||||||
|
#define HW_USB0_TEST 0x80040380
|
||||||
|
#define HW_USB1_TEST 0x80040390
|
||||||
|
#define HW_USB0_RSTPARA 0x800403A0
|
||||||
|
#define HW_USB1_RSTPARA 0x800403B0
|
||||||
|
#define HW_DEVICEID 0x80040400
|
||||||
|
#define HW_PCON_ADDR 0x80040500
|
||||||
|
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
// EMI
|
||||||
|
#define HW_EMI_SCONR 0x80700000
|
||||||
|
#define HW_EMI_STMG0R 0x80700004
|
||||||
|
#define HW_EMI_STMG1R 0x80700008
|
||||||
|
#define HW_EMI_SCTLR 0x8070000C
|
||||||
|
#define HW_EMI_SREFR 0x80700010
|
||||||
|
#define HW_EMI_SCSLR0_LOW 0x80700014
|
||||||
|
#define HW_EMI_SCSLR1_LOW 0x80700018
|
||||||
|
#define HW_EMI_SCSLR2_LOW 0x8070001c
|
||||||
|
#define HW_EMI_SCSLR3_LOW 0x80700020
|
||||||
|
#define HW_EMI_SCSLR4_LOW 0x80700024
|
||||||
|
#define HW_EMI_SCSLR5_LOW 0x80700028
|
||||||
|
#define HW_EMI_SCSLR6_LOW 0x8070002c
|
||||||
|
#define HW_EMI_SCSLR7_LOW 0x80700030
|
||||||
|
|
||||||
|
#define HW_EMI_SMSKR0 0x80700054
|
||||||
|
#define HW_EMI_SMSKR1 0x80700058
|
||||||
|
#define HW_EMI_SMSKR2 0x8070005c
|
||||||
|
#define HW_EMI_SMSKR3 0x80700060
|
||||||
|
#define HW_EMI_SMSKR4 0x80700064
|
||||||
|
#define HW_EMI_SMSKR5 0x80700068
|
||||||
|
#define HW_EMI_SMSKR6 0x8070006c
|
||||||
|
#define HW_EMI_SMSKR7 0x80700070
|
||||||
|
|
||||||
|
#define HW_EMI_CSALIAS0_LOW 0x80700074
|
||||||
|
#define HW_EMI_CSALIAS1_LOW 0x80700078
|
||||||
|
|
||||||
|
#define HW_EMI_CSREMAP0_LOW 0x80700084
|
||||||
|
#define HW_EMI_CSREMAP1_LOW 0x80700088
|
||||||
|
|
||||||
|
#define HW_EMI_SMTMGR_SET0 0x80700094
|
||||||
|
#define HW_EMI_SMTMGR_SET1 0x80700098
|
||||||
|
#define HW_EMI_SMTMGR_SET2 0x8070009c
|
||||||
|
|
||||||
|
#define HW_EMI_FLASH_TRPDR 0x807000a0
|
||||||
|
#define HW_EMI_SMCTLR 0x807000a4
|
||||||
|
#define HW_EMI_EXN_MODE_REG 0x807000ac
|
||||||
|
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
// IOCON
|
||||||
|
#define HW_IOCON_PIO_BASE 0x80044000
|
||||||
|
#define HW_IOCON_SCKLOC 0x800442c0
|
||||||
|
#define HW_IOCON(port,pin) (HW_IOCON_PIO_BASE|(((port)<<5)|((pin)<<2)))
|
||||||
|
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
// GPIO
|
||||||
|
#define HW_GPIO_DATA_BASE 0x50000000
|
||||||
|
|
||||||
|
#define HW_GPIO_DMA_CTRL 0x50000010
|
||||||
|
#define HW_GPIO_DMA_DATA 0x50000020
|
||||||
|
#define HW_GPIO_DMA_PADCTRL0 0x50000030
|
||||||
|
#define HW_GPIO_DMA_PADCTRL1 0x50000040
|
||||||
|
#define HW_GPIO_DMA_PADCTRL2 0x50000050
|
||||||
|
#define HW_GPIO_DMA_PADCTRL3 0x50000060
|
||||||
|
#define HW_GPIO_DMA_CTRL1 0x50000070
|
||||||
|
#define HW_GPIO_DMA_CTRL2 0x50000080
|
||||||
|
#define HW_GPIO_DMA_CTRL3 0x50000090
|
||||||
|
#define HW_GPIO_DMA_CTRL4 0x500000a0
|
||||||
|
|
||||||
|
#define HW_GPIO_DATA0 0x50000000
|
||||||
|
#define HW_GPIO_DATA1 0x50010000
|
||||||
|
#define HW_GPIO_DATA2 0x50020000
|
||||||
|
#define HW_GPIO_DATA3 0x50030000
|
||||||
|
#define HW_GPIO_DATA4 0x50040000
|
||||||
|
|
||||||
|
#define HW_GPIO_DIR0 0x50008000
|
||||||
|
#define HW_GPIO_DIR1 0x50018000
|
||||||
|
#define HW_GPIO_DIR2 0x50028000
|
||||||
|
#define HW_GPIO_DIR3 0x50038000
|
||||||
|
#define HW_GPIO_DIR4 0x50048000
|
||||||
|
|
||||||
|
#define HW_GPIO_IS0 0x50008010
|
||||||
|
#define HW_GPIO_IS1 0x50018010
|
||||||
|
#define HW_GPIO_IS2 0x50028010
|
||||||
|
#define HW_GPIO_IS3 0x50038010
|
||||||
|
#define HW_GPIO_IS4 0x50048010
|
||||||
|
|
||||||
|
#define HW_GPIO_IBE0 0x50008020
|
||||||
|
#define HW_GPIO_IBE1 0x50018020
|
||||||
|
#define HW_GPIO_IBE2 0x50028020
|
||||||
|
#define HW_GPIO_IBE3 0x50038020
|
||||||
|
#define HW_GPIO_IBE4 0x50048020
|
||||||
|
|
||||||
|
#define HW_GPIO_IEV0 0x50008030
|
||||||
|
#define HW_GPIO_IEV1 0x50018030
|
||||||
|
#define HW_GPIO_IEV2 0x50028030
|
||||||
|
#define HW_GPIO_IEV3 0x50038030
|
||||||
|
#define HW_GPIO_IEV4 0x50048030
|
||||||
|
|
||||||
|
#define HW_GPIO_IE0 0x50008040
|
||||||
|
#define HW_GPIO_IE1 0x50018040
|
||||||
|
#define HW_GPIO_IE2 0x50028040
|
||||||
|
#define HW_GPIO_IE3 0x50038040
|
||||||
|
#define HW_GPIO_IE4 0x50048040
|
||||||
|
|
||||||
|
#define HW_GPIO_RIS0 0x50008050
|
||||||
|
#define HW_GPIO_RIS1 0x50018050
|
||||||
|
#define HW_GPIO_RIS2 0x50028050
|
||||||
|
#define HW_GPIO_RIS3 0x50038050
|
||||||
|
#define HW_GPIO_RIS4 0x50048050
|
||||||
|
|
||||||
|
#define HW_GPIO_MIS0 0x50008060
|
||||||
|
#define HW_GPIO_MIS1 0x50018060
|
||||||
|
#define HW_GPIO_MIS2 0x50028060
|
||||||
|
#define HW_GPIO_MIS3 0x50038060
|
||||||
|
#define HW_GPIO_MIS4 0x50048060
|
||||||
|
|
||||||
|
#define HW_GPIO_IC0 0x50008070
|
||||||
|
#define HW_GPIO_IC1 0x50018070
|
||||||
|
#define HW_GPIO_IC2 0x50028070
|
||||||
|
#define HW_GPIO_IC3 0x50038070
|
||||||
|
#define HW_GPIO_IC4 0x50048070
|
||||||
|
|
||||||
|
#define HW_GPIO_DATAMASK0 0x50008080
|
||||||
|
#define HW_GPIO_DATAMASK1 0x50018080
|
||||||
|
#define HW_GPIO_DATAMASK2 0x50028080
|
||||||
|
#define HW_GPIO_DATAMASK3 0x50038080
|
||||||
|
#define HW_GPIO_DATAMASK4 0x50048080
|
||||||
|
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
// Quad-SPI0
|
||||||
|
#define QSPI0_BASE_ADDRESS 0x80068000
|
||||||
|
#define HW_QSPI0_CTRL0 0x80068000
|
||||||
|
#define HW_QSPI0_CTRL1 0x80068010
|
||||||
|
#define HW_QSPI0_CMD 0x80068020
|
||||||
|
#define HW_QSPI0_TIMING 0x80068030
|
||||||
|
#define HW_QSPI0_DATA 0x80068040
|
||||||
|
#define HW_QSPI0_STATUS 0x80068050
|
||||||
|
#define HW_QSPI0_DEBUG0 0x80068060
|
||||||
|
#define HW_QSPI0_XFER 0x80068070
|
||||||
|
|
||||||
|
/////////////////////////////////////////////////////////
|
||||||
|
//DMA0
|
||||||
|
#define HW_DMA0_SAR0 0x80100000
|
||||||
|
#define HW_DMA0_DAR0 0x80100008
|
||||||
|
#define HW_DMA0_LLP0 0x80100010
|
||||||
|
#define HW_DMA0_CTL0 0x80100018
|
||||||
|
#define HW_DMA0_SSTAT0 0x80100020
|
||||||
|
#define HW_DMA0_DSTAT0 0x80100028
|
||||||
|
#define HW_DMA0_SSTATAR0 0x80100030
|
||||||
|
#define HW_DMA0_DSTATAR0 0x80100038
|
||||||
|
#define HW_DMA0_CFG0 0x80100040
|
||||||
|
#define HW_DMA0_SGR0 0x80100048
|
||||||
|
#define HW_DMA0_DSR0 0x80100050
|
||||||
|
|
||||||
|
#define HW_DMA0_SAR1 0x80100058
|
||||||
|
#define HW_DMA0_DAR1 0x80100060
|
||||||
|
#define HW_DMA0_LLP1 0x80100068
|
||||||
|
#define HW_DMA0_CTL1 0x80100070
|
||||||
|
#define HW_DMA0_SSTAT1 0x80100078
|
||||||
|
#define HW_DMA0_DSTAT1 0x80100080
|
||||||
|
#define HW_DMA0_SSTATAR1 0x80100088
|
||||||
|
#define HW_DMA0_DSTATAR1 0x80100090
|
||||||
|
#define HW_DMA0_CFG1 0x80100098
|
||||||
|
#define HW_DMA0_SGR1 0x801000a0
|
||||||
|
#define HW_DMA0_DSR1 0x801000a8
|
||||||
|
|
||||||
|
#define HW_DMA0_SAR2 0x801000b0
|
||||||
|
#define HW_DMA0_DAR2 0x801000b8
|
||||||
|
#define HW_DMA0_LLP2 0x801000c0
|
||||||
|
#define HW_DMA0_CTL2 0x801000c8
|
||||||
|
#define HW_DMA0_SSTAT2 0x801000d0
|
||||||
|
#define HW_DMA0_DSTAT2 0x801000d8
|
||||||
|
#define HW_DMA0_SSTATAR2 0x801000e0
|
||||||
|
#define HW_DMA0_DSTATAR2 0x801000e8
|
||||||
|
#define HW_DMA0_CFG2 0x801000f0
|
||||||
|
#define HW_DMA0_SGR2 0x801000f8
|
||||||
|
#define HW_DMA0_DSR2 0x80100100
|
||||||
|
|
||||||
|
#define HW_DMA0_SAR3 0x80100108
|
||||||
|
#define HW_DMA0_DAR3 0x80100110
|
||||||
|
#define HW_DMA0_LLP3 0x80100118
|
||||||
|
#define HW_DMA0_CTL3 0x80100120
|
||||||
|
#define HW_DMA0_SSTAT3 0x80100128
|
||||||
|
#define HW_DMA0_DSTAT3 0x80100130
|
||||||
|
#define HW_DMA0_SSTATAR3 0x80100138
|
||||||
|
#define HW_DMA0_DSTATAR3 0x80100140
|
||||||
|
#define HW_DMA0_CFG3 0x80100148
|
||||||
|
#define HW_DMA0_SGR3 0x80100150
|
||||||
|
#define HW_DMA0_DSR3 0x80100158
|
||||||
|
|
||||||
|
#define HW_DMA0_SAR4 0x80100160
|
||||||
|
#define HW_DMA0_DAR4 0x80100168
|
||||||
|
#define HW_DMA0_LLP4 0x80100170
|
||||||
|
#define HW_DMA0_CTL4 0x80100178
|
||||||
|
#define HW_DMA0_SSTAT4 0x80100180
|
||||||
|
#define HW_DMA0_DSTAT4 0x80100188
|
||||||
|
#define HW_DMA0_SSTATAR4 0x80100190
|
||||||
|
#define HW_DMA0_DSTATAR4 0x80100198
|
||||||
|
#define HW_DMA0_CFG4 0x801001a0
|
||||||
|
#define HW_DMA0_SGR4 0x801001a8
|
||||||
|
#define HW_DMA0_DSR4 0x801001b0
|
||||||
|
|
||||||
|
#define HW_DMA0_SAR5 0x801001b8
|
||||||
|
#define HW_DMA0_DAR5 0x801001c0
|
||||||
|
#define HW_DMA0_LLP5 0x801001c8
|
||||||
|
#define HW_DMA0_CTL5 0x801001d0
|
||||||
|
#define HW_DMA0_SSTAT5 0x801001d8
|
||||||
|
#define HW_DMA0_DSTAT5 0x801001e0
|
||||||
|
#define HW_DMA0_SSTATAR5 0x801001e8
|
||||||
|
#define HW_DMA0_DSTATAR5 0x801001f0
|
||||||
|
#define HW_DMA0_CFG5 0x801001f8
|
||||||
|
#define HW_DMA0_SGR5 0x80100200
|
||||||
|
#define HW_DMA0_DSR5 0x80100208
|
||||||
|
|
||||||
|
#define HW_DMA0_SAR6 0x80100210
|
||||||
|
#define HW_DMA0_DAR6 0x80100218
|
||||||
|
#define HW_DMA0_LLP6 0x80100220
|
||||||
|
#define HW_DMA0_CTL6 0x80100228
|
||||||
|
#define HW_DMA0_SSTAT6 0x80100230
|
||||||
|
#define HW_DMA0_DSTAT6 0x80100238
|
||||||
|
#define HW_DMA0_SSTATAR6 0x80100240
|
||||||
|
#define HW_DMA0_DSTATAR6 0x80100248
|
||||||
|
#define HW_DMA0_CFG6 0x80100250
|
||||||
|
#define HW_DMA0_SGR6 0x80100258
|
||||||
|
#define HW_DMA0_DSR6 0x80100260
|
||||||
|
|
||||||
|
#define HW_DMA0_SAR7 0x80100268
|
||||||
|
#define HW_DMA0_DAR7 0x80100270
|
||||||
|
#define HW_DMA0_LLP7 0x80100278
|
||||||
|
#define HW_DMA0_CTL7 0x80100280
|
||||||
|
#define HW_DMA0_SSTAT7 0x80100288
|
||||||
|
#define HW_DMA0_DSTAT7 0x80100290
|
||||||
|
#define HW_DMA0_SSTATAR7 0x80100298
|
||||||
|
#define HW_DMA0_DSTATAR7 0x801002a0
|
||||||
|
#define HW_DMA0_CFG7 0x801002a8
|
||||||
|
#define HW_DMA0_SGR7 0x801002b0
|
||||||
|
#define HW_DMA0_DSR7 0x801002b8
|
||||||
|
|
||||||
|
#define HW_DMA0_RawTFR 0x801002c0
|
||||||
|
#define HW_DMA0_RawBLOCK 0x801002c8
|
||||||
|
#define HW_DMA0_RawSRCTRAN 0x801002d0
|
||||||
|
#define HW_DMA0_RawDSTTRAN 0x801002d8
|
||||||
|
#define HW_DMA0_RawERR 0x801002e0
|
||||||
|
|
||||||
|
#define HW_DMA0_StatusTFR 0x801002e8
|
||||||
|
#define HW_DMA0_StatusBLOCK 0x801002f0
|
||||||
|
#define HW_DMA0_StatusSRCTRAN 0x801002f8
|
||||||
|
#define HW_DMA0_StatusDSTTRAN 0x80100300
|
||||||
|
#define HW_DMA0_StatusERR 0x80100308
|
||||||
|
|
||||||
|
#define HW_DMA0_MaskTFR 0x80100310
|
||||||
|
#define HW_DMA0_MaskBLOCK 0x80100318
|
||||||
|
#define HW_DMA0_MaskSRCTRAN 0x80100320
|
||||||
|
#define HW_DMA0_MaskDSTTRAN 0x80100328
|
||||||
|
#define HW_DMA0_MaskERR 0x80100330
|
||||||
|
|
||||||
|
#define HW_DMA0_ClearTFR 0x80100338
|
||||||
|
#define HW_DMA0_ClearBLOCK 0x80100340
|
||||||
|
#define HW_DMA0_ClearSRCTRAN 0x80100348
|
||||||
|
#define HW_DMA0_ClearDSTTRAN 0x80100350
|
||||||
|
#define HW_DMA0_ClearERR 0x80100358
|
||||||
|
|
||||||
|
#define HW_DMA0_STATUSINT 0x80100360
|
||||||
|
|
||||||
|
#define HW_DMA0_ReqSrcReg 0x80100368
|
||||||
|
#define HW_DMA0_ReqDstReg 0x80100370
|
||||||
|
#define HW_DMA0_SglReqSrcReg 0x80100378
|
||||||
|
#define HW_DMA0_SglReqDstReg 0x80100380
|
||||||
|
#define HW_DMA0_LstSrcReg 0x80100388
|
||||||
|
#define HW_DMA0_LstDstReg 0x80100390
|
||||||
|
|
||||||
|
#define HW_DMA0_DMACFGREG 0x80100398
|
||||||
|
#define HW_DMA0_CHENREG 0x801003a0
|
||||||
|
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
// DMA1
|
||||||
|
#define HW_DMA1_SAR0 0x80200000
|
||||||
|
#define HW_DMA1_DAR0 0x80200008
|
||||||
|
#define HW_DMA1_LLP0 0x80200010
|
||||||
|
#define HW_DMA1_CTL0 0x80200018
|
||||||
|
#define HW_DMA1_SSTAT0 0x80200020
|
||||||
|
#define HW_DMA1_DSTAT0 0x80200028
|
||||||
|
#define HW_DMA1_SSTATAR0 0x80200030
|
||||||
|
#define HW_DMA1_DSTATAR0 0x80200038
|
||||||
|
#define HW_DMA1_CFG0 0x80200040
|
||||||
|
#define HW_DMA1_SGR0 0x80200048
|
||||||
|
#define HW_DMA1_DSR0 0x80200050
|
||||||
|
|
||||||
|
#define HW_DMA1_SAR1 0x80200058
|
||||||
|
#define HW_DMA1_DAR1 0x80200060
|
||||||
|
#define HW_DMA1_LLP1 0x80200068
|
||||||
|
#define HW_DMA1_CTL1 0x80200070
|
||||||
|
#define HW_DMA1_SSTAT1 0x80200078
|
||||||
|
#define HW_DMA1_DSTAT1 0x80200080
|
||||||
|
#define HW_DMA1_SSTATAR1 0x80200088
|
||||||
|
#define HW_DMA1_DSTATAR1 0x80200090
|
||||||
|
#define HW_DMA1_CFG1 0x80200098
|
||||||
|
#define HW_DMA1_SGR1 0x802000a0
|
||||||
|
#define HW_DMA1_DSR1 0x802000a8
|
||||||
|
|
||||||
|
#define HW_DMA1_SAR2 0x802000b0
|
||||||
|
#define HW_DMA1_DAR2 0x802000b8
|
||||||
|
#define HW_DMA1_LLP2 0x802000c0
|
||||||
|
#define HW_DMA1_CTL2 0x802000c8
|
||||||
|
#define HW_DMA1_SSTAT2 0x802000d0
|
||||||
|
#define HW_DMA1_DSTAT2 0x802000d8
|
||||||
|
#define HW_DMA1_SSTATAR2 0x802000e0
|
||||||
|
#define HW_DMA1_DSTATAR2 0x802000e8
|
||||||
|
#define HW_DMA1_CFG2 0x802000f0
|
||||||
|
#define HW_DMA1_SGR2 0x802000f8
|
||||||
|
#define HW_DMA1_DSR2 0x80200100
|
||||||
|
|
||||||
|
#define HW_DMA1_SAR3 0x80200108
|
||||||
|
#define HW_DMA1_DAR3 0x80200110
|
||||||
|
#define HW_DMA1_LLP3 0x80200118
|
||||||
|
#define HW_DMA1_CTL3 0x80200120
|
||||||
|
#define HW_DMA1_SSTAT3 0x80200128
|
||||||
|
#define HW_DMA1_DSTAT3 0x80200130
|
||||||
|
#define HW_DMA1_SSTATAR3 0x80200138
|
||||||
|
#define HW_DMA1_DSTATAR3 0x80200140
|
||||||
|
#define HW_DMA1_CFG3 0x80200148
|
||||||
|
#define HW_DMA1_SGR3 0x80200150
|
||||||
|
#define HW_DMA1_DSR3 0x80200158
|
||||||
|
|
||||||
|
#define HW_DMA1_SAR4 0x80200160
|
||||||
|
#define HW_DMA1_DAR4 0x80200168
|
||||||
|
#define HW_DMA1_LLP4 0x80200170
|
||||||
|
#define HW_DMA1_CTL4 0x80200178
|
||||||
|
#define HW_DMA1_SSTAT4 0x80200180
|
||||||
|
#define HW_DMA1_DSTAT4 0x80200188
|
||||||
|
#define HW_DMA1_SSTATAR4 0x80200190
|
||||||
|
#define HW_DMA1_DSTATAR4 0x80200198
|
||||||
|
#define HW_DMA1_CFG4 0x802001a0
|
||||||
|
#define HW_DMA1_SGR4 0x802001a8
|
||||||
|
#define HW_DMA1_DSR4 0x802001b0
|
||||||
|
|
||||||
|
#define HW_DMA1_SAR5 0x802001b8
|
||||||
|
#define HW_DMA1_DAR5 0x802001c0
|
||||||
|
#define HW_DMA1_LLP5 0x802001c8
|
||||||
|
#define HW_DMA1_CTL5 0x802001d0
|
||||||
|
#define HW_DMA1_SSTAT5 0x802001d8
|
||||||
|
#define HW_DMA1_DSTAT5 0x802001e0
|
||||||
|
#define HW_DMA1_SSTATAR5 0x802001e8
|
||||||
|
#define HW_DMA1_DSTATAR5 0x802001f0
|
||||||
|
#define HW_DMA1_CFG5 0x802001f8
|
||||||
|
#define HW_DMA1_SGR5 0x80200200
|
||||||
|
#define HW_DMA1_DSR5 0x80200208
|
||||||
|
|
||||||
|
#define HW_DMA1_SAR6 0x80200210
|
||||||
|
#define HW_DMA1_DAR6 0x80200218
|
||||||
|
#define HW_DMA1_LLP6 0x80200220
|
||||||
|
#define HW_DMA1_CTL6 0x80200228
|
||||||
|
#define HW_DMA1_SSTAT6 0x80200230
|
||||||
|
#define HW_DMA1_DSTAT6 0x80200238
|
||||||
|
#define HW_DMA1_SSTATAR6 0x80200240
|
||||||
|
#define HW_DMA1_DSTATAR6 0x80200248
|
||||||
|
#define HW_DMA1_CFG6 0x80200250
|
||||||
|
#define HW_DMA1_SGR6 0x80200258
|
||||||
|
#define HW_DMA1_DSR6 0x80200260
|
||||||
|
|
||||||
|
#define HW_DMA1_SAR7 0x80200268
|
||||||
|
#define HW_DMA1_DAR7 0x80200270
|
||||||
|
#define HW_DMA1_LLP7 0x80200278
|
||||||
|
#define HW_DMA1_CTL7 0x80200280
|
||||||
|
#define HW_DMA1_SSTAT7 0x80200288
|
||||||
|
#define HW_DMA1_DSTAT7 0x80200290
|
||||||
|
#define HW_DMA1_SSTATAR7 0x80200298
|
||||||
|
#define HW_DMA1_DSTATAR7 0x802002a0
|
||||||
|
#define HW_DMA1_CFG7 0x802002a8
|
||||||
|
#define HW_DMA1_SGR7 0x802002b0
|
||||||
|
#define HW_DMA1_DSR7 0x802002b8
|
||||||
|
|
||||||
|
#define HW_DMA1_RawTFR 0x802002c0
|
||||||
|
#define HW_DMA1_RawBLOCK 0x802002c8
|
||||||
|
#define HW_DMA1_RawSRCTRAN 0x802002d0
|
||||||
|
#define HW_DMA1_RawDSTTRAN 0x802002d8
|
||||||
|
#define HW_DMA1_RawERR 0x802002e0
|
||||||
|
|
||||||
|
#define HW_DMA1_StatusTFR 0x802002e8
|
||||||
|
#define HW_DMA1_StatusBLOCK 0x802002f0
|
||||||
|
#define HW_DMA1_StatusSRCTRAN 0x802002f8
|
||||||
|
#define HW_DMA1_StatusDSTTRAN 0x80200300
|
||||||
|
#define HW_DMA1_StatusERR 0x80200308
|
||||||
|
|
||||||
|
#define HW_DMA1_MaskTFR 0x80200310
|
||||||
|
#define HW_DMA1_MaskBLOCK 0x80200318
|
||||||
|
#define HW_DMA1_MaskSRCTRAN 0x80200320
|
||||||
|
#define HW_DMA1_MaskDSTTRAN 0x80200328
|
||||||
|
#define HW_DMA1_MaskERR 0x80200330
|
||||||
|
|
||||||
|
#define HW_DMA1_ClearTFR 0x80200338
|
||||||
|
#define HW_DMA1_ClearBLOCK 0x80200340
|
||||||
|
#define HW_DMA1_ClearSRCTRAN 0x80200348
|
||||||
|
#define HW_DMA1_ClearDSTTRAN 0x80200350
|
||||||
|
#define HW_DMA1_ClearERR 0x80200358
|
||||||
|
|
||||||
|
#define HW_DMA1_STATUSINT 0x80200360
|
||||||
|
|
||||||
|
#define HW_DMA1_ReqSrcReg 0x80200368
|
||||||
|
#define HW_DMA1_ReqDstReg 0x80200370
|
||||||
|
#define HW_DMA1_SglReqSrcReg 0x80200378
|
||||||
|
#define HW_DMA1_SglReqDstReg 0x80200380
|
||||||
|
#define HW_DMA1_LstSrcReg 0x80200388
|
||||||
|
#define HW_DMA1_LstDstReg 0x80200390
|
||||||
|
|
||||||
|
#define HW_DMA1_DMACFGREG 0x80200398
|
||||||
|
#define HW_DMA1_CHENREG 0x802003a0
|
||||||
|
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
// ICOLL
|
||||||
|
#define HW_ICOLL_VECTOR 0x80054000
|
||||||
|
#define HW_ICOLL_LEVELACK 0x80054010
|
||||||
|
#define HW_ICOLL_CTRL 0x80054020
|
||||||
|
#define HW_ICOLL_STAT 0x80054030
|
||||||
|
#define HW_ICOLL_RAW0 0x80054040
|
||||||
|
#define HW_ICOLL_RAW1 0x80054050
|
||||||
|
#define HW_ICOLL_PRIORITY0 0x80054060
|
||||||
|
#define HW_ICOLL_PRIORITY1 0x80054070
|
||||||
|
#define HW_ICOLL_PRIORITY2 0x80054080
|
||||||
|
#define HW_ICOLL_PRIORITY3 0x80054090
|
||||||
|
#define HW_ICOLL_PRIORITY4 0x800540A0
|
||||||
|
#define HW_ICOLL_PRIORITY5 0x800540B0
|
||||||
|
#define HW_ICOLL_PRIORITY6 0x800540C0
|
||||||
|
#define HW_ICOLL_PRIORITY7 0x800540D0
|
||||||
|
#define HW_ICOLL_PRIORITY8 0x800540E0
|
||||||
|
#define HW_ICOLL_PRIORITY9 0x800540F0
|
||||||
|
#define HW_ICOLL_PRIORITY10 0x80054100
|
||||||
|
#define HW_ICOLL_PRIORITY11 0x80054110
|
||||||
|
#define HW_ICOLL_PRIORITY12 0x80054120
|
||||||
|
#define HW_ICOLL_PRIORITY13 0x80054130
|
||||||
|
#define HW_ICOLL_PRIORITY14 0x80054140
|
||||||
|
#define HW_ICOLL_PRIORITY15 0x80054150
|
||||||
|
#define HW_ICOLL_VBASE 0x80054160
|
||||||
|
#define HW_ICOLL_DEBUG 0x80054170
|
||||||
|
#define HW_ICOLL_DBGREAD0 0x80054180
|
||||||
|
#define HW_ICOLL_DBGREAD1 0x80054190
|
||||||
|
#define HW_ICOLL_DBGFLAG 0x800541A0
|
||||||
|
#define HW_ICOLL_DBGREQUEST0 0x800541B0
|
||||||
|
#define HW_ICOLL_DBGREQUEST1 0x800541C0
|
||||||
|
#define HW_ICOLL_CLEAR0 0x800541D0
|
||||||
|
#define HW_ICOLL_CLEAR1 0x800541E0
|
||||||
|
#define HW_ICOLL_UNDEF_VECTOR 0x800541F0
|
||||||
|
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
// TIMER0
|
||||||
|
#define HW_TIMER0_IR 0x80088000
|
||||||
|
#define HW_TIMER0_TCR 0x80088010
|
||||||
|
#define HW_TIMER0_DIR 0x80088020
|
||||||
|
#define HW_TIMER0_TC0 0x80088030
|
||||||
|
#define HW_TIMER0_TC1 0x80088040
|
||||||
|
#define HW_TIMER0_TC2 0x80088050
|
||||||
|
#define HW_TIMER0_TC3 0x80088060
|
||||||
|
#define HW_TIMER0_PR 0x80088070
|
||||||
|
#define HW_TIMER0_PC 0x80088080
|
||||||
|
#define HW_TIMER0_MCR 0x80088090
|
||||||
|
#define HW_TIMER0_MR0 0x800880a0
|
||||||
|
#define HW_TIMER0_MR1 0x800880b0
|
||||||
|
#define HW_TIMER0_MR2 0x800880C0
|
||||||
|
#define HW_TIMER0_MR3 0x800880D0
|
||||||
|
#define HW_TIMER0_CCR 0x800880E0
|
||||||
|
#define HW_TIMER0_CR0 0x800880F0
|
||||||
|
#define HW_TIMER0_CR1 0x80088100
|
||||||
|
#define HW_TIMER0_CR2 0x80088110
|
||||||
|
#define HW_TIMER0_CR3 0x80088120
|
||||||
|
#define HW_TIMER0_EMR 0x80088130
|
||||||
|
#define HW_TIMER0_PWMTH0 0x80088140
|
||||||
|
#define HW_TIMER0_PWMTH1 0x80088150
|
||||||
|
#define HW_TIMER0_PWMTH2 0x80088160
|
||||||
|
#define HW_TIMER0_PWMTH3 0x80088170
|
||||||
|
#define HW_TIMER0_CTCR 0x80088180
|
||||||
|
#define HW_TIMER0_PWMC 0x80088190
|
||||||
|
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
// USART
|
||||||
|
|
||||||
|
typedef struct {
|
||||||
|
__IO unsigned long CTRL0[4];
|
||||||
|
__IO unsigned long CTRL1[4];
|
||||||
|
__IO unsigned long CTRL2[4];
|
||||||
|
__IO unsigned long LINECTRL[4];
|
||||||
|
__IO unsigned long INTR[4];
|
||||||
|
__IO unsigned long DATA[4];
|
||||||
|
__IO unsigned long STAT[4];
|
||||||
|
__I unsigned long DEBUG[4];
|
||||||
|
__IO unsigned long ILPR[4];
|
||||||
|
__IO unsigned long RS485CTRL[4];
|
||||||
|
__IO unsigned long RS485ADRMATCH[4];
|
||||||
|
__IO unsigned long RS485DLY[4];
|
||||||
|
__IO unsigned long AUTOBAUD[4];
|
||||||
|
__IO unsigned long CTRL3[4];
|
||||||
|
} ASM_USART_TypeDef;
|
||||||
|
|
||||||
|
#define UART0_BASE 0x80000000
|
||||||
|
#define UART1_BASE 0x80004000
|
||||||
|
#define UART2_BASE 0x80008000
|
||||||
|
#define UART3_BASE 0x8000C000
|
||||||
|
#define UART4_BASE 0x80010000
|
||||||
|
#define UART5_BASE 0x80014000
|
||||||
|
#define UART6_BASE 0x80018000
|
||||||
|
#define UART7_BASE 0x8001C000
|
||||||
|
#define UART8_BASE 0x80020000
|
||||||
|
#define UART9_BASE 0x80024000
|
||||||
|
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
// MAC
|
||||||
|
#define HW_ETH_BASE_ADDR 0x80500000
|
||||||
|
#define HW_ETH_MACCR (HW_ETH_BASE_ADDR + 0x0000)
|
||||||
|
#define HW_ETH_MACFFR (HW_ETH_BASE_ADDR + 0x0004)
|
||||||
|
#define HW_ETH_MACHTHR (HW_ETH_BASE_ADDR + 0x0008)
|
||||||
|
#define HW_ETH_MACHTLR (HW_ETH_BASE_ADDR + 0x000C)
|
||||||
|
#define HW_ETH_MACMIIAR (HW_ETH_BASE_ADDR + 0x0010)
|
||||||
|
#define HW_ETH_MACMIIDR (HW_ETH_BASE_ADDR + 0x0014)
|
||||||
|
#define HW_ETH_MACFCR (HW_ETH_BASE_ADDR + 0x0018)
|
||||||
|
#define HW_ETH_MACVLANTR (HW_ETH_BASE_ADDR + 0x001C)
|
||||||
|
#define HW_ETH_MACVR (HW_ETH_BASE_ADDR + 0x0020)
|
||||||
|
#define HW_ETH_MACRWUFFR (HW_ETH_BASE_ADDR + 0x0028)
|
||||||
|
#define HW_ETH_MACPMTCSR (HW_ETH_BASE_ADDR + 0x002C)
|
||||||
|
#define HW_ETH_MACDBGR (HW_ETH_BASE_ADDR + 0x0034)
|
||||||
|
#define HW_ETH_MACISR (HW_ETH_BASE_ADDR + 0x0038)
|
||||||
|
#define HW_ETH_MACIMR (HW_ETH_BASE_ADDR + 0x003C)
|
||||||
|
#define HW_ETH_MACA0HR (HW_ETH_BASE_ADDR + 0x0040)
|
||||||
|
#define HW_ETH_MACA0LR (HW_ETH_BASE_ADDR + 0x0044)
|
||||||
|
#define HW_ETH_MACA1HR (HW_ETH_BASE_ADDR + 0x0048)
|
||||||
|
#define HW_ETH_MACA1LR (HW_ETH_BASE_ADDR + 0x004C)
|
||||||
|
#define HW_ETH_MACA2HR (HW_ETH_BASE_ADDR + 0x0050)
|
||||||
|
#define HW_ETH_MACA2LR (HW_ETH_BASE_ADDR + 0x0054)
|
||||||
|
#define HW_ETH_MACA3HR (HW_ETH_BASE_ADDR + 0x0058)
|
||||||
|
#define HW_ETH_MACA3LR (HW_ETH_BASE_ADDR + 0x005C)
|
||||||
|
#define HW_ETH_MACA4HR (HW_ETH_BASE_ADDR + 0x0060)
|
||||||
|
#define HW_ETH_MACA4LR (HW_ETH_BASE_ADDR + 0x0064)
|
||||||
|
#define HW_ETH_MMCCR (HW_ETH_BASE_ADDR + 0x0100)
|
||||||
|
#define HW_ETH_MMCRIR (HW_ETH_BASE_ADDR + 0x0104)
|
||||||
|
#define HW_ETH_MMCTIR (HW_ETH_BASE_ADDR + 0x0108)
|
||||||
|
#define HW_ETH_MMCRIMR (HW_ETH_BASE_ADDR + 0x010C)
|
||||||
|
#define HW_ETH_MMCTIMR (HW_ETH_BASE_ADDR + 0x0110)
|
||||||
|
#define HW_ETH_MMCTGFSCCR (HW_ETH_BASE_ADDR + 0x014C)
|
||||||
|
#define HW_ETH_MMCTGFMSCCR (HW_ETH_BASE_ADDR + 0x0150)
|
||||||
|
#define HW_ETH_MMCTGFCR (HW_ETH_BASE_ADDR + 0x0168)
|
||||||
|
#define HW_ETH_MMCRFCECR (HW_ETH_BASE_ADDR + 0x0194)
|
||||||
|
#define HW_ETH_MMCRFAECR (HW_ETH_BASE_ADDR + 0x0198)
|
||||||
|
#define HW_ETH_MMCRGUFCR (HW_ETH_BASE_ADDR + 0x01C4)
|
||||||
|
#define HW_ETH_PTPTSCR (HW_ETH_BASE_ADDR + 0x0700)
|
||||||
|
#define HW_ETH_PTPSSIR (HW_ETH_BASE_ADDR + 0x0704)
|
||||||
|
#define HW_ETH_PTPTSHR (HW_ETH_BASE_ADDR + 0x0708)
|
||||||
|
#define HW_ETH_PTPTSLR (HW_ETH_BASE_ADDR + 0x070C)
|
||||||
|
#define HW_ETH_PTPTSHUR (HW_ETH_BASE_ADDR + 0x0710)
|
||||||
|
#define HW_ETH_PTPTSLUR (HW_ETH_BASE_ADDR + 0x0714)
|
||||||
|
#define HW_ETH_PTPTSAR (HW_ETH_BASE_ADDR + 0x0718)
|
||||||
|
#define HW_ETH_PTPTTHR (HW_ETH_BASE_ADDR + 0x071C)
|
||||||
|
#define HW_ETH_PTPTTLR (HW_ETH_BASE_ADDR + 0x0720)
|
||||||
|
#define HW_ETH_PTPTSSR (HW_ETH_BASE_ADDR + 0x0728)
|
||||||
|
#define HW_ETH_PTPPPSCR (HW_ETH_BASE_ADDR + 0x072C)
|
||||||
|
#define HW_ETH_DMABMR (HW_ETH_BASE_ADDR + 0x1000)
|
||||||
|
#define HW_ETH_DMATPDR (HW_ETH_BASE_ADDR + 0x1004)
|
||||||
|
#define HW_ETH_DMARPDR (HW_ETH_BASE_ADDR + 0x1008)
|
||||||
|
#define HW_ETH_DMARDLAR (HW_ETH_BASE_ADDR + 0x100C)
|
||||||
|
#define HW_ETH_DMATDLAR (HW_ETH_BASE_ADDR + 0x1010)
|
||||||
|
#define HW_ETH_DMASR (HW_ETH_BASE_ADDR + 0x1014)
|
||||||
|
#define HW_ETH_DMAOMR (HW_ETH_BASE_ADDR + 0x1018)
|
||||||
|
#define HW_ETH_DMAIER (HW_ETH_BASE_ADDR + 0x101C)
|
||||||
|
#define HW_ETH_DMAMFBOCR (HW_ETH_BASE_ADDR + 0x1020)
|
||||||
|
#define HW_ETH_DMARSWTR (HW_ETH_BASE_ADDR + 0x1024)
|
||||||
|
#define HW_ETH_DMACHTDR (HW_ETH_BASE_ADDR + 0x1048)
|
||||||
|
#define HW_ETH_DMACHRDR (HW_ETH_BASE_ADDR + 0x104C)
|
||||||
|
#define HW_ETH_DMACHTBAR (HW_ETH_BASE_ADDR + 0x1050)
|
||||||
|
#define HW_ETH_DMACHRBAR (HW_ETH_BASE_ADDR + 0x1054)
|
||||||
|
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
#endif /* __ASM9260T_REGS_H__ */
|
||||||
|
|
||||||
|
|
@ -0,0 +1,62 @@
|
||||||
|
/*
|
||||||
|
* File : interrupt.h
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006 - 2015, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2015-04-14 ArdaFu first version
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "ASM9260T.h"
|
||||||
|
#include "rtthread.h"
|
||||||
|
|
||||||
|
void HW_SetPinMux(rt_uint8_t port, rt_uint8_t pin, rt_uint8_t mux_type)
|
||||||
|
{
|
||||||
|
rt_uint32_t addr = HW_IOCON(port, pin);
|
||||||
|
rt_uint32_t val = inl(addr); // read origin value
|
||||||
|
|
||||||
|
val &= ~7UL; // clear MUX field
|
||||||
|
val |= mux_type; // set MUX field with new value
|
||||||
|
|
||||||
|
outl(val ,addr); // Set new value
|
||||||
|
}
|
||||||
|
|
||||||
|
void HW_GpioSetDir(rt_uint8_t port, rt_uint8_t pin, rt_uint8_t isOut)
|
||||||
|
{
|
||||||
|
rt_uint32_t addr = HW_GPIO_DATA_BASE | ((port>>2)<<16) | 0x8000;
|
||||||
|
rt_uint32_t val;
|
||||||
|
addr = isOut? REG_SET(addr) : REG_CLR(addr);
|
||||||
|
val = (1 << ((port%4)*8+pin));
|
||||||
|
outl(val, addr);
|
||||||
|
}
|
||||||
|
|
||||||
|
void HW_GpioSetVal(rt_uint8_t port, rt_uint8_t pin)
|
||||||
|
{
|
||||||
|
rt_uint32_t addr, val;
|
||||||
|
addr = REG_SET(HW_GPIO_DATA_BASE | ((port>>2)<<16));
|
||||||
|
val = (1 << ((port%4)*8+pin));
|
||||||
|
outl(val, addr);
|
||||||
|
}
|
||||||
|
|
||||||
|
void HW_GpioClrVal(rt_uint8_t port, rt_uint8_t pin)
|
||||||
|
{
|
||||||
|
rt_uint32_t addr, val;
|
||||||
|
addr = REG_CLR(HW_GPIO_DATA_BASE | ((port>>2)<<16));
|
||||||
|
val = (1 << ((port%4)*8+pin));
|
||||||
|
outl(val, addr);
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,31 @@
|
||||||
|
/*
|
||||||
|
* File : interrupt.h
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006 - 2015, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2015-04-14 ArdaFu first version
|
||||||
|
*/
|
||||||
|
#ifndef __GPIO_H__
|
||||||
|
#define __GPIO_H__
|
||||||
|
|
||||||
|
extern void HW_SetPinMux(rt_uint8_t port, rt_uint8_t pin, rt_uint8_t mux_type);
|
||||||
|
extern void HW_GpioSetDir(rt_uint8_t port, rt_uint8_t pin, rt_uint8_t isOut);
|
||||||
|
extern void HW_GpioSetVal(rt_uint8_t port, rt_uint8_t pin);
|
||||||
|
extern void HW_GpioClrVal(rt_uint8_t port, rt_uint8_t pin);
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,221 @@
|
||||||
|
/*
|
||||||
|
* File : interrupt.c
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006-2015, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2011-01-13 weety first version
|
||||||
|
* 2015-04-27 ArdaFu Port bsp from at91sam9260 to asm9260t
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <rthw.h>
|
||||||
|
#include "asm9260t.h"
|
||||||
|
#include "interrupt.h"
|
||||||
|
|
||||||
|
#define MAX_HANDLERS (64)
|
||||||
|
|
||||||
|
extern rt_uint32_t rt_interrupt_nest;
|
||||||
|
|
||||||
|
/* exception and interrupt handler table */
|
||||||
|
struct rt_irq_desc irq_desc[MAX_HANDLERS];
|
||||||
|
|
||||||
|
rt_uint32_t rt_interrupt_from_thread;
|
||||||
|
rt_uint32_t rt_interrupt_to_thread;
|
||||||
|
rt_uint32_t rt_thread_switch_interrupt_flag;
|
||||||
|
|
||||||
|
|
||||||
|
/* --------------------------------------------------------------------
|
||||||
|
* Interrupt initialization
|
||||||
|
* -------------------------------------------------------------------- */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The default interrupt priority levels (0 = lowest, 3 = highest).
|
||||||
|
*/
|
||||||
|
static rt_uint32_t default_irq_priority[MAX_HANDLERS/4] =
|
||||||
|
{
|
||||||
|
0x00000000UL, /* INT3 - INT0 */
|
||||||
|
0x00000000UL, /* INT7 - INT4 */
|
||||||
|
0x00000000UL, /* INT11 - INT8 */
|
||||||
|
0x02000000UL, /* INT15 - INT12 */
|
||||||
|
0x02020202UL, /* INT19 - INT16 */
|
||||||
|
0x02020202UL, /* INT23 - INT20 */
|
||||||
|
0x00000002UL, /* INT27 - INT24 */
|
||||||
|
0x01010100UL, /* INT31 - INT28 */
|
||||||
|
0x00000001UL, /* INT35 - INT32 */
|
||||||
|
0x00000000UL, /* INT39 - INT36 */
|
||||||
|
0x00000000UL, /* INT43 - INT40 */
|
||||||
|
0x00000000UL, /* INT47 - INT44 */
|
||||||
|
0x00000000UL, /* INT51 - INT48 */
|
||||||
|
0x00000000UL, /* INT55 - INT52 */
|
||||||
|
0x00000000UL, /* INT59 - INT56 */
|
||||||
|
0x00000000UL, /* INT63 - INT60 */
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
void rt_hw_interrupt_mask(int irq);
|
||||||
|
void rt_hw_interrupt_umask(int irq);
|
||||||
|
|
||||||
|
rt_isr_handler_t rt_hw_interrupt_handle(rt_uint32_t vector, void *param)
|
||||||
|
{
|
||||||
|
rt_kprintf("UN-handled interrupt %d occurred!!!\n", vector);
|
||||||
|
return RT_NULL;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This function will initialize hardware interrupt
|
||||||
|
*/
|
||||||
|
void rt_hw_interrupt_init(void)
|
||||||
|
{
|
||||||
|
register rt_uint32_t idx;
|
||||||
|
/* Initialize the ICOLL interrupt controller */
|
||||||
|
outl((1<<8), REG_SET(HW_AHBCLKCTRL1)); // Enable ICOLL clock
|
||||||
|
outl((1<<8), REG_CLR(HW_PRESETCTRL1)); // Reset ICOLL start
|
||||||
|
outl((1<<8), REG_SET(HW_PRESETCTRL1)); // Reset ICOLL stop
|
||||||
|
|
||||||
|
for(idx = 0; idx < (MAX_HANDLERS/4); idx++)
|
||||||
|
{
|
||||||
|
rt_uint32_t reg = (HW_ICOLL_PRIORITY0 + 0x10*idx);
|
||||||
|
outl(default_irq_priority[idx], REG_VAL(reg));
|
||||||
|
}
|
||||||
|
|
||||||
|
/* init exceptions table */
|
||||||
|
for(idx=0; idx < MAX_HANDLERS; idx++)
|
||||||
|
{
|
||||||
|
irq_desc[idx].handler = (rt_isr_handler_t)rt_hw_interrupt_handle;
|
||||||
|
irq_desc[idx].param = RT_NULL;
|
||||||
|
#ifdef RT_USING_INTERRUPT_INFO
|
||||||
|
rt_snprintf(irq_desc[idx].name, RT_NAME_MAX - 1, "default");
|
||||||
|
irq_desc[idx].counter = 0;
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
/* init interrupt nest, and context in thread sp */
|
||||||
|
rt_interrupt_nest = 0;
|
||||||
|
rt_interrupt_from_thread = 0;
|
||||||
|
rt_interrupt_to_thread = 0;
|
||||||
|
rt_thread_switch_interrupt_flag = 0;
|
||||||
|
|
||||||
|
outl(0x00000000, REG_CLR(HW_ICOLL_VBASE)); //todo: fix this bug
|
||||||
|
|
||||||
|
outl(0x00020000, REG_CLR(HW_ICOLL_CTRL)); // Clear CTRL REG
|
||||||
|
outl(0x00050000, REG_SET(HW_ICOLL_CTRL));
|
||||||
|
outl(0x00000004, HW_ICOLL_UNDEF_VECTOR);
|
||||||
|
outl(~0UL, REG_CLR(HW_ICOLL_CLEAR0));
|
||||||
|
outl(~0UL, REG_CLR(HW_ICOLL_CLEAR1));
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This function will mask a interrupt.
|
||||||
|
* @param vector the interrupt number
|
||||||
|
*/
|
||||||
|
void rt_hw_interrupt_mask(int irq)
|
||||||
|
{
|
||||||
|
rt_uint32_t reg = HW_ICOLL_PRIORITY0 + ((irq & 0x3CUL) << 2);
|
||||||
|
rt_uint32_t bit = 4UL << ((irq & 3UL)<<3);
|
||||||
|
outl(bit, REG_CLR(reg));
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This function will un-mask a interrupt.
|
||||||
|
* @param vector the interrupt number
|
||||||
|
*/
|
||||||
|
void rt_hw_interrupt_umask(int irq)
|
||||||
|
{
|
||||||
|
rt_uint32_t reg = HW_ICOLL_PRIORITY0 + ((irq & 0x3CUL) << 2);
|
||||||
|
rt_uint32_t bit = 4UL << ((irq & 3UL)<<3);
|
||||||
|
outl(bit, REG_SET(reg));
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This function will install a interrupt service routine to a interrupt.
|
||||||
|
* @param vector the interrupt number
|
||||||
|
* @param handler the interrupt service routine to be installed
|
||||||
|
* @param param the interrupt service function parameter
|
||||||
|
* @param name the interrupt name
|
||||||
|
* @return old handler
|
||||||
|
*/
|
||||||
|
rt_isr_handler_t rt_hw_interrupt_install(int vector, rt_isr_handler_t handler,
|
||||||
|
void *param, char *name)
|
||||||
|
{
|
||||||
|
rt_isr_handler_t old_handler = RT_NULL;
|
||||||
|
|
||||||
|
if(vector < MAX_HANDLERS)
|
||||||
|
{
|
||||||
|
old_handler = irq_desc[vector].handler;
|
||||||
|
if (handler != RT_NULL)
|
||||||
|
{
|
||||||
|
irq_desc[vector].handler = (rt_isr_handler_t)handler;
|
||||||
|
irq_desc[vector].param = param;
|
||||||
|
#ifdef RT_USING_INTERRUPT_INFO
|
||||||
|
rt_snprintf(irq_desc[vector].name, RT_NAME_MAX - 1, "%s", name);
|
||||||
|
irq_desc[vector].counter = 0;
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
return old_handler;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
rt_uint32_t rt_hw_interrupt_get_active(rt_uint32_t fiq_irq)
|
||||||
|
{
|
||||||
|
//volatile rt_uint32_t irqstat;
|
||||||
|
rt_uint32_t id;
|
||||||
|
/* AIC need this dummy read */
|
||||||
|
inl(HW_ICOLL_VECTOR);
|
||||||
|
/* get irq number */
|
||||||
|
id = inl(HW_ICOLL_STAT);
|
||||||
|
/* clear pending register */
|
||||||
|
//irqstat = inl(HW_ICOLL_VECTOR);
|
||||||
|
return id;
|
||||||
|
}
|
||||||
|
|
||||||
|
void rt_hw_interrupt_ack(rt_uint32_t fiq_irq, rt_uint32_t id)
|
||||||
|
{
|
||||||
|
rt_uint32_t reg = HW_ICOLL_PRIORITY0 + ((id & 0x3CUL) << 2);
|
||||||
|
rt_uint32_t level = 1UL << (0x3 & (inl(REG_VAL(reg)) >>((id & 3UL)<<3)));
|
||||||
|
|
||||||
|
if(id & 0x20)
|
||||||
|
outl((1UL<<(id&0x1F)), REG_SET(HW_ICOLL_CLEAR1));
|
||||||
|
else
|
||||||
|
outl((1UL<<id), REG_SET(HW_ICOLL_CLEAR0));
|
||||||
|
|
||||||
|
outl(level, HW_ICOLL_LEVELACK);
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef RT_USING_FINSH
|
||||||
|
void list_irq(void)
|
||||||
|
{
|
||||||
|
int irq;
|
||||||
|
rt_kprintf("number\tcount\tname\n");
|
||||||
|
for (irq = 0; irq < MAX_HANDLERS; irq++)
|
||||||
|
{
|
||||||
|
if (rt_strncmp(irq_desc[irq].name, "default", sizeof("default")))
|
||||||
|
{
|
||||||
|
rt_kprintf("%02ld: %10ld %s\n",
|
||||||
|
irq, irq_desc[irq].counter, irq_desc[irq].name);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#include <finsh.h>
|
||||||
|
FINSH_FUNCTION_EXPORT(list_irq, list system irq);
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,97 @@
|
||||||
|
/*
|
||||||
|
* File : interrupt.h
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006 - 2015, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2015-04-14 ArdaFu first version
|
||||||
|
*/
|
||||||
|
#ifndef __INTERRUPT_H__
|
||||||
|
#define __INTERRUPT_H__
|
||||||
|
|
||||||
|
#define INT_IRQ 0x00
|
||||||
|
#define INT_FIQ 0x01
|
||||||
|
|
||||||
|
|
||||||
|
// IRQ Source
|
||||||
|
#define INT_ARM_COMMRX 0
|
||||||
|
#define INT_ARM_COMMTX 1
|
||||||
|
#define INT_RTC 2
|
||||||
|
#define INT_GPIO0 3
|
||||||
|
#define INT_GPIO1 4
|
||||||
|
#define INT_GPIO2 5
|
||||||
|
#define INT_GPIO3 6
|
||||||
|
#define INT_GPIO4_IIS1 7
|
||||||
|
#define INT_USB0 8
|
||||||
|
#define INT_USB1 9
|
||||||
|
#define INT_USB0_DMA 10
|
||||||
|
#define INT_USB1_DMA 11
|
||||||
|
#define INT_MAC 12
|
||||||
|
#define INT_MAC_PMT 13
|
||||||
|
#define INT_NAND 14
|
||||||
|
#define INT_UART0 15
|
||||||
|
#define INT_UART1 16
|
||||||
|
#define INT_UART2 17
|
||||||
|
#define INT_UART3 18
|
||||||
|
#define INT_UART4 19
|
||||||
|
#define INT_UART5 20
|
||||||
|
#define INT_UART6 21
|
||||||
|
#define INT_UART7 22
|
||||||
|
#define INT_UART8 23
|
||||||
|
#define INT_UART9 24
|
||||||
|
#define INT_I2S0 25
|
||||||
|
#define INT_I2C0 26
|
||||||
|
#define INT_I2C1 27
|
||||||
|
#define INT_CAMIF 28
|
||||||
|
#define INT_TIMER0 29
|
||||||
|
#define INT_TIMER1 30
|
||||||
|
#define INT_TIMER2 31
|
||||||
|
#define INT_TIMER3 32
|
||||||
|
#define INT_ADC0 33
|
||||||
|
#define INT_DAC0 34
|
||||||
|
#define INT_USB0_RESUME_HOSTDISCONNECT 35
|
||||||
|
#define INT_USB0_VBUSVALID 36
|
||||||
|
#define INT_USB1_RESUME_HOSTDISCONNECT 37
|
||||||
|
#define INT_USB1_VBUSVALID 38
|
||||||
|
#define INT_DMA0_CH0 39
|
||||||
|
#define INT_DMA0_CH1 40
|
||||||
|
#define INT_DMA0_CH2 41
|
||||||
|
#define INT_DMA0_CH3 42
|
||||||
|
#define INT_DMA0_CH4 43
|
||||||
|
#define INT_DMA0_CH5 44
|
||||||
|
#define INT_DMA0_CH6 45
|
||||||
|
#define INT_DMA0_CH7 46
|
||||||
|
#define INT_DMA1_CH0 47
|
||||||
|
#define INT_DMA1_CH1 48
|
||||||
|
#define INT_DMA1_CH2 49
|
||||||
|
#define INT_DMA1_CH3 50
|
||||||
|
#define INT_DMA1_CH4 51
|
||||||
|
#define INT_DMA1_CH5 52
|
||||||
|
#define INT_DMA1_CH6 53
|
||||||
|
#define INT_DMA1_CH7 54
|
||||||
|
#define INT_WATCHDOG 55
|
||||||
|
#define INT_CAN0 56
|
||||||
|
#define INT_CAN1 57
|
||||||
|
#define INT_QEI 58
|
||||||
|
#define INT_MCPWM 59
|
||||||
|
#define INT_SPI0 60
|
||||||
|
#define INT_SPI1 61
|
||||||
|
#define INT_QUADSPI0 62
|
||||||
|
#define INT_SSP0 63
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,37 @@
|
||||||
|
/*
|
||||||
|
* File : reset.c
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006-2015, RT-Thread Develop Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2011-01-13 weety modified from mini2440
|
||||||
|
* 2015-04-27 ArdaFu Port bsp from at91sam9260 to asm9260t
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <rtthread.h>
|
||||||
|
|
||||||
|
void machine_reset(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void machine_shutdown(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
|
@ -0,0 +1,31 @@
|
||||||
|
/*
|
||||||
|
* File : rt_low_level_gcc.inc
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006 - 2015, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2015-04-14 ArdaFu first version
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*--------- Stack size of CPU modes ------------------------------------------*/
|
||||||
|
.equ UND_STK_SIZE, 2048
|
||||||
|
.equ SVC_STK_SIZE, 4096
|
||||||
|
.equ ABT_STK_SIZE, 2048
|
||||||
|
.equ IRQ_STK_SIZE, 4096
|
||||||
|
.equ FIQ_STK_SIZE, 4096
|
||||||
|
.equ SYS_STK_SIZE, 2048
|
||||||
|
|
@ -0,0 +1,31 @@
|
||||||
|
/*
|
||||||
|
* File : rt_low_level_iar.inc
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006 - 2015, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2015-04-14 ArdaFu first version
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*-------- Stack size of CPU modes -------------------------------------------*/
|
||||||
|
#define UND_STK_SIZE 512
|
||||||
|
#define SVC_STK_SIZE 4096
|
||||||
|
#define ABT_STK_SIZE 512
|
||||||
|
#define IRQ_STK_SIZE 1024
|
||||||
|
#define FIQ_STK_SIZE 1024
|
||||||
|
#define SYS_STK_SIZE 512
|
||||||
|
|
@ -0,0 +1,30 @@
|
||||||
|
/*
|
||||||
|
* File : rt_low_level_init.c
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006 - 2015, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2015-04-14 ArdaFu first version
|
||||||
|
* 2015-04-27 ArdaFu Port bsp from at91sam9260 to asm9260t
|
||||||
|
*/
|
||||||
|
|
||||||
|
void rt_low_level_init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
|
@ -0,0 +1,32 @@
|
||||||
|
;/*
|
||||||
|
; * File : rt_low_level_keil.inc
|
||||||
|
; * This file is part of RT-Thread RTOS
|
||||||
|
; * COPYRIGHT (C) 2006 - 2015, RT-Thread Development Team
|
||||||
|
; *
|
||||||
|
; * This program is free software; you can redistribute it and/or modify
|
||||||
|
; * it under the terms of the GNU General Public License as published by
|
||||||
|
; * the Free Software Foundation; either version 2 of the License, or
|
||||||
|
; * (at your option) any later version.
|
||||||
|
; *
|
||||||
|
; * This program is distributed in the hope that it will be useful,
|
||||||
|
; * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
; * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
; * GNU General Public License for more details.
|
||||||
|
; *
|
||||||
|
; * You should have received a copy of the GNU General Public License along
|
||||||
|
; * with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
; * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
; *
|
||||||
|
; * Change Logs:
|
||||||
|
; * Date Author Notes
|
||||||
|
; * 2015-04-14 ArdaFu first version
|
||||||
|
; */
|
||||||
|
|
||||||
|
;/*-------- Stack size of CPU modes ------------------------------------------*/
|
||||||
|
UND_STK_SIZE EQU 512
|
||||||
|
SVC_STK_SIZE EQU 4096
|
||||||
|
ABT_STK_SIZE EQU 512
|
||||||
|
IRQ_STK_SIZE EQU 1024
|
||||||
|
FIQ_STK_SIZE EQU 1024
|
||||||
|
SYS_STK_SIZE EQU 512
|
||||||
|
END
|
||||||
|
|
@ -0,0 +1,303 @@
|
||||||
|
/*
|
||||||
|
* File : clock.c
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2011-01-13 weety first version
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <rtthread.h>
|
||||||
|
|
||||||
|
/*
|
||||||
|
static rt_list_t clocks;
|
||||||
|
|
||||||
|
struct clk {
|
||||||
|
char name[32];
|
||||||
|
rt_uint32_t rate_hz;
|
||||||
|
struct clk *parent;
|
||||||
|
rt_list_t node;
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct clk clk32k = {
|
||||||
|
"clk32k",
|
||||||
|
AT91_SLOW_CLOCK,
|
||||||
|
RT_NULL,
|
||||||
|
{RT_NULL, RT_NULL},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct clk main_clk = {
|
||||||
|
"main",
|
||||||
|
0,
|
||||||
|
RT_NULL,
|
||||||
|
{RT_NULL, RT_NULL},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct clk plla = {
|
||||||
|
"plla",
|
||||||
|
0,
|
||||||
|
RT_NULL,
|
||||||
|
{RT_NULL, RT_NULL},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct clk mck = {
|
||||||
|
"mck",
|
||||||
|
0,
|
||||||
|
RT_NULL,
|
||||||
|
{RT_NULL, RT_NULL},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct clk uhpck = {
|
||||||
|
"uhpck",
|
||||||
|
0,
|
||||||
|
RT_NULL,
|
||||||
|
{RT_NULL, RT_NULL},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct clk pllb = {
|
||||||
|
"pllb",
|
||||||
|
0,
|
||||||
|
&main_clk,
|
||||||
|
{RT_NULL, RT_NULL},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct clk udpck = {
|
||||||
|
"udpck",
|
||||||
|
0,
|
||||||
|
&pllb,
|
||||||
|
{RT_NULL, RT_NULL},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct clk *const standard_pmc_clocks[] = {
|
||||||
|
// four primary clocks
|
||||||
|
&clk32k,
|
||||||
|
&main_clk,
|
||||||
|
&plla,
|
||||||
|
|
||||||
|
// MCK
|
||||||
|
&mck
|
||||||
|
};
|
||||||
|
|
||||||
|
// clocks cannot be de-registered no refcounting necessary
|
||||||
|
struct clk *clk_get(const char *id)
|
||||||
|
{
|
||||||
|
struct clk *clk;
|
||||||
|
rt_list_t *list;
|
||||||
|
|
||||||
|
for (list = (&clocks)->next; list != &clocks; list = list->next)
|
||||||
|
{
|
||||||
|
clk = (struct clk *)rt_list_entry(list, struct clk, node);
|
||||||
|
if (rt_strcmp(id, clk->name) == 0)
|
||||||
|
return clk;
|
||||||
|
}
|
||||||
|
|
||||||
|
return RT_NULL;
|
||||||
|
}
|
||||||
|
|
||||||
|
rt_uint32_t clk_get_rate(struct clk *clk)
|
||||||
|
{
|
||||||
|
rt_uint32_t rate;
|
||||||
|
|
||||||
|
for (;;) {
|
||||||
|
rate = clk->rate_hz;
|
||||||
|
if (rate || !clk->parent)
|
||||||
|
break;
|
||||||
|
clk = clk->parent;
|
||||||
|
}
|
||||||
|
return rate;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_uint32_t at91_pll_rate(struct clk *pll, rt_uint32_t freq, rt_uint32_t reg)
|
||||||
|
{
|
||||||
|
unsigned mul, div;
|
||||||
|
|
||||||
|
div = reg & 0xff;
|
||||||
|
mul = (reg >> 16) & 0x7ff;
|
||||||
|
if (div && mul) {
|
||||||
|
freq /= div;
|
||||||
|
freq *= mul + 1;
|
||||||
|
} else
|
||||||
|
freq = 0;
|
||||||
|
|
||||||
|
return freq;
|
||||||
|
}
|
||||||
|
|
||||||
|
static unsigned at91_pll_calc(unsigned main_freq, unsigned out_freq)
|
||||||
|
{
|
||||||
|
unsigned i, div = 0, mul = 0, diff = 1 << 30;
|
||||||
|
unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00;
|
||||||
|
|
||||||
|
//PLL output max 240 MHz (or 180 MHz per errata)
|
||||||
|
if (out_freq > 240000000)
|
||||||
|
goto fail;
|
||||||
|
|
||||||
|
for (i = 1; i < 256; i++) {
|
||||||
|
int diff1;
|
||||||
|
unsigned input, mul1;
|
||||||
|
|
||||||
|
//
|
||||||
|
// PLL input between 1MHz and 32MHz per spec, but lower
|
||||||
|
// frequences seem necessary in some cases so allow 100K.
|
||||||
|
// Warning: some newer products need 2MHz min.
|
||||||
|
//
|
||||||
|
input = main_freq / i;
|
||||||
|
if (input < 100000)
|
||||||
|
continue;
|
||||||
|
if (input > 32000000)
|
||||||
|
continue;
|
||||||
|
|
||||||
|
mul1 = out_freq / input;
|
||||||
|
if (mul1 > 2048)
|
||||||
|
continue;
|
||||||
|
if (mul1 < 2)
|
||||||
|
goto fail;
|
||||||
|
|
||||||
|
diff1 = out_freq - input * mul1;
|
||||||
|
if (diff1 < 0)
|
||||||
|
diff1 = -diff1;
|
||||||
|
if (diff > diff1) {
|
||||||
|
diff = diff1;
|
||||||
|
div = i;
|
||||||
|
mul = mul1;
|
||||||
|
if (diff == 0)
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (i == 256 && diff > (out_freq >> 5))
|
||||||
|
goto fail;
|
||||||
|
return ret | ((mul - 1) << 16) | div;
|
||||||
|
fail:
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_uint32_t at91_usb_rate(struct clk *pll, rt_uint32_t freq, rt_uint32_t reg)
|
||||||
|
{
|
||||||
|
if (pll == &pllb && (reg & AT91_PMC_USB96M))
|
||||||
|
return freq / 2;
|
||||||
|
else
|
||||||
|
return freq;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
// PLLB generated USB full speed clock init
|
||||||
|
static void at91_pllb_usbfs_clock_init(rt_uint32_t main_clock)
|
||||||
|
{
|
||||||
|
rt_uint32_t at91_pllb_usb_init;
|
||||||
|
//
|
||||||
|
// USB clock init: choose 48 MHz PLLB value,
|
||||||
|
// disable 48MHz clock during usb peripheral suspend.
|
||||||
|
//
|
||||||
|
// REVISIT: assumes MCK doesn't derive from PLLB!
|
||||||
|
//
|
||||||
|
uhpck.parent = &pllb;
|
||||||
|
|
||||||
|
at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
|
||||||
|
pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
|
||||||
|
|
||||||
|
at91_sys_write(AT91_CKGR_PLLBR, 0);
|
||||||
|
|
||||||
|
udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
|
||||||
|
uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct clk *at91_css_to_clk(unsigned long css)
|
||||||
|
{
|
||||||
|
switch (css) {
|
||||||
|
case AT91_PMC_CSS_SLOW:
|
||||||
|
return &clk32k;
|
||||||
|
case AT91_PMC_CSS_MAIN:
|
||||||
|
return &main_clk;
|
||||||
|
case AT91_PMC_CSS_PLLA:
|
||||||
|
return &plla;
|
||||||
|
case AT91_PMC_CSS_PLLB:
|
||||||
|
return &pllb;
|
||||||
|
}
|
||||||
|
|
||||||
|
return RT_NULL;
|
||||||
|
}
|
||||||
|
|
||||||
|
#define false 0
|
||||||
|
#define true 1
|
||||||
|
int at91_clock_init(rt_uint32_t main_clock)
|
||||||
|
{
|
||||||
|
unsigned tmp, freq, mckr;
|
||||||
|
int i;
|
||||||
|
int pll_overclock = false;
|
||||||
|
|
||||||
|
//
|
||||||
|
// When the bootloader initialized the main oscillator correctly,
|
||||||
|
// there's no problem using the cycle counter. But if it didn't,
|
||||||
|
// or when using oscillator bypass mode, we must be told the speed
|
||||||
|
// of the main clock.
|
||||||
|
//
|
||||||
|
if (!main_clock) {
|
||||||
|
do {
|
||||||
|
tmp = at91_sys_read(AT91_CKGR_MCFR);
|
||||||
|
} while (!(tmp & AT91_PMC_MAINRDY));
|
||||||
|
main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
|
||||||
|
}
|
||||||
|
main_clk.rate_hz = main_clock;
|
||||||
|
|
||||||
|
// report if PLLA is more than mildly overclocked
|
||||||
|
plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
|
||||||
|
if (plla.rate_hz > 209000000)
|
||||||
|
pll_overclock = true;
|
||||||
|
if (pll_overclock)
|
||||||
|
;//rt_kprintf("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
|
||||||
|
|
||||||
|
at91_pllb_usbfs_clock_init(main_clock);
|
||||||
|
|
||||||
|
//
|
||||||
|
// MCK and CPU derive from one of those primary clocks.
|
||||||
|
// For now, assume this parentage won't change.
|
||||||
|
//
|
||||||
|
mckr = at91_sys_read(AT91_PMC_MCKR);
|
||||||
|
mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
|
||||||
|
freq = mck.parent->rate_hz;
|
||||||
|
freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); // prescale
|
||||||
|
|
||||||
|
mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); // mdiv
|
||||||
|
|
||||||
|
// Register the PMC's standard clocks
|
||||||
|
rt_list_init(&clocks);
|
||||||
|
for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
|
||||||
|
rt_list_insert_after(&clocks, &standard_pmc_clocks[i]->node);
|
||||||
|
|
||||||
|
rt_list_insert_after(&clocks, &pllb.node);
|
||||||
|
rt_list_insert_after(&clocks, &uhpck.node);
|
||||||
|
rt_list_insert_after(&clocks, &udpck.node);
|
||||||
|
|
||||||
|
// MCK and CPU clock are "always on"
|
||||||
|
//clk_enable(&mck);
|
||||||
|
|
||||||
|
//rt_kprintf("Clocks: CPU %u MHz, master %u MHz, main %u.%03u MHz\n",
|
||||||
|
// freq / 1000000, (unsigned) mck.rate_hz / 1000000,
|
||||||
|
// (unsigned) main_clock / 1000000,
|
||||||
|
// ((unsigned) main_clock % 1000000) / 1000); //cause blocked
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
*/
|
||||||
|
|
||||||
|
// @brief System Clock Configuration
|
||||||
|
|
||||||
|
void rt_hw_clock_init(void)
|
||||||
|
{
|
||||||
|
//at91_clock_init(18432000);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
@ -0,0 +1,55 @@
|
||||||
|
/*
|
||||||
|
* File : timer0.c
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006-2015, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2015-04-29 ArdaFu first version
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "timer0.h"
|
||||||
|
#include "ASM9260T.h"
|
||||||
|
#include "rtthread.h"
|
||||||
|
void hw_timer0_init(void)
|
||||||
|
{
|
||||||
|
uint32_t pclk;
|
||||||
|
|
||||||
|
// enable timer0's clock, reset timer0
|
||||||
|
outl((1<<4), REG_SET(HW_AHBCLKCTRL1));
|
||||||
|
outl((1<<4), REG_CLR(HW_PRESETCTRL1));
|
||||||
|
outl((1<<4), REG_SET(HW_PRESETCTRL1));
|
||||||
|
|
||||||
|
outl((1<<0), REG_CLR(HW_TIMER0_TCR));
|
||||||
|
|
||||||
|
outl((3<<0), REG_CLR(HW_TIMER0_CTCR));
|
||||||
|
|
||||||
|
outl((3<<0), REG_CLR(HW_TIMER0_DIR));
|
||||||
|
|
||||||
|
outl(0, REG_CLR(HW_TIMER0_PR));
|
||||||
|
outl(0, REG_CLR(HW_TIMER0_PC));
|
||||||
|
|
||||||
|
outl((7<<0), REG_CLR(HW_TIMER0_MCR));
|
||||||
|
outl((3<<0), REG_SET(HW_TIMER0_MCR));
|
||||||
|
|
||||||
|
pclk = (inl(HW_SYSPLLCTRL)&0x1FF)*1000000u/4u;
|
||||||
|
outl(pclk/RT_TICK_PER_SECOND, HW_TIMER0_MR0);
|
||||||
|
|
||||||
|
outl((1<<4), REG_SET(HW_TIMER0_TCR));
|
||||||
|
outl((1<<4), REG_CLR(HW_TIMER0_TCR));
|
||||||
|
outl((1<<0), REG_SET(HW_TIMER0_TCR));
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,34 @@
|
||||||
|
/*
|
||||||
|
* File : timer0.h
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006-2015, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2015-04-29 ArdaFu first version
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __HW_TIMER0_H__
|
||||||
|
#define __HW_TIMER0_H__
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
#include "stdint.h"
|
||||||
|
|
||||||
|
extern void hw_timer0_init(void);
|
||||||
|
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
#endif /* __HW_TIMER0_H__ */
|
||||||
|
|
||||||
|
|
@ -0,0 +1,112 @@
|
||||||
|
/*
|
||||||
|
* File : interrupt.h
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006 - 2015, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2015-04-14 ArdaFu first version
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "ASM9260T.h"
|
||||||
|
#include "rtthread.h"
|
||||||
|
#include "uart.h"
|
||||||
|
|
||||||
|
void Hw_UartDisable(HW_USART_TypeDef* uartBase)
|
||||||
|
{
|
||||||
|
uartBase->INTR[R_CLR] = ASM_UART_INTR_RXIEN | ASM_UART_INTR_TXIEN | ASM_UART_INTR_RTIS;
|
||||||
|
uartBase->CTRL2[R_CLR] = ASM_UART_CTRL2_TXE | ASM_UART_CTRL2_RXE;
|
||||||
|
}
|
||||||
|
|
||||||
|
void Hw_UartEnable(HW_USART_TypeDef* uartBase)
|
||||||
|
{
|
||||||
|
uartBase->CTRL2[R_CLR] = 0x0000C000UL; //clear CTSEN and RTSEN
|
||||||
|
uartBase->CTRL2[R_SET] = ASM_UART_CTRL2_TXE | ASM_UART_CTRL2_RXE | ASM_UART_CTRL2_USARTEN;
|
||||||
|
uartBase->INTR[R_SET] = ASM_UART_INTR_RXIEN | ASM_UART_INTR_RTIEN;
|
||||||
|
}
|
||||||
|
|
||||||
|
void Hw_UartReset(HW_USART_TypeDef* uartBase)
|
||||||
|
{
|
||||||
|
uartBase->CTRL0[R_CLR] = ASM_UART_CTRL0_SFTRST | ASM_UART_CTRL0_CLKGATE | ASM_UART_CTRL0_RXTO_ENABLE;
|
||||||
|
uartBase->CTRL0[R_SET] = ASM_UART_CTRL0_SFTRST | ASM_UART_CTRL0_CLKGATE | ASM_UART_CTRL0_RXTO_ENABLE;
|
||||||
|
}
|
||||||
|
|
||||||
|
void Hw_UartConfig(HW_USART_TypeDef* uartBase,int baudRate, int dataBits, int stopBits,int parity)
|
||||||
|
{
|
||||||
|
rt_uint32_t mode = ASM_UART_LINECTRL_FEN;
|
||||||
|
|
||||||
|
switch (dataBits)
|
||||||
|
{
|
||||||
|
case 8:
|
||||||
|
mode |= ASM_UART_LINECTRL_WLEN8;
|
||||||
|
break;
|
||||||
|
case 7:
|
||||||
|
mode |= ASM_UART_LINECTRL_WLEN7;
|
||||||
|
break;
|
||||||
|
case 6:
|
||||||
|
mode |= ASM_UART_LINECTRL_WLEN6;
|
||||||
|
break;
|
||||||
|
case 5:
|
||||||
|
mode |= ASM_UART_LINECTRL_WLEN5;
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
mode |= ASM_UART_LINECTRL_WLEN8;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
switch (stopBits)
|
||||||
|
{
|
||||||
|
case 2:
|
||||||
|
mode |= ASM_UART_LINECTRL_STP2;
|
||||||
|
break;
|
||||||
|
case 1:
|
||||||
|
default:
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
switch (parity)
|
||||||
|
{
|
||||||
|
case 1:
|
||||||
|
mode |= ASM_UART_LINECTRL_PEN;
|
||||||
|
break;
|
||||||
|
case 2:
|
||||||
|
mode |= ASM_UART_LINECTRL_PEN | ASM_UART_LINECTRL_EPS;
|
||||||
|
break;
|
||||||
|
case 0:
|
||||||
|
default:
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
//16bit nBaudDivint
|
||||||
|
mode |= (((12000000 <<2 ) / baudRate) & UART_BAUD_DIVINT_MASK) << 10;
|
||||||
|
//6bit nNaudDivfrac
|
||||||
|
mode |= (((12000000 <<2 ) / baudRate) & UART_BAUD_DIVFRAC_MASK) << 8;
|
||||||
|
|
||||||
|
|
||||||
|
uartBase->LINECTRL[R_VAL] = mode;
|
||||||
|
}
|
||||||
|
|
||||||
|
void Hw_UartInit(int index)
|
||||||
|
{
|
||||||
|
// uart0 = bit11, uart9 = bit20
|
||||||
|
int ctrl_bit = index + 11;
|
||||||
|
outl(1UL<<ctrl_bit,REG_SET(HW_AHBCLKCTRL0)); //UART4 ENABLE bit15
|
||||||
|
outl(0x1, HW_UART0CLKDIV + index*4); //UART4 div 2
|
||||||
|
outl(1UL<<ctrl_bit,REG_CLR(HW_AHBCLKCTRL0)); //UART4 clk gate
|
||||||
|
outl(1UL<<ctrl_bit,REG_SET(HW_AHBCLKCTRL0)); //UART4 clk gate
|
||||||
|
outl(1UL<<ctrl_bit,REG_CLR(HW_PRESETCTRL0)); //UART4 reset
|
||||||
|
outl(1UL<<ctrl_bit,REG_SET(HW_PRESETCTRL0)); //UART4 reset
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,111 @@
|
||||||
|
/*
|
||||||
|
* File : interrupt.h
|
||||||
|
* This file is part of RT-Thread RTOS
|
||||||
|
* COPYRIGHT (C) 2006 - 2015, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License along
|
||||||
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||||
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2015-04-14 ArdaFu first version
|
||||||
|
*/
|
||||||
|
#ifndef __UART_H__
|
||||||
|
#define __UART_H__
|
||||||
|
|
||||||
|
#define R_VAL 0
|
||||||
|
#define R_SET 1
|
||||||
|
#define R_CLR 2
|
||||||
|
#define R_TOG 3
|
||||||
|
|
||||||
|
typedef struct
|
||||||
|
{
|
||||||
|
volatile rt_uint32_t CTRL0[4];
|
||||||
|
volatile rt_uint32_t CTRL1[4];
|
||||||
|
volatile rt_uint32_t CTRL2[4];
|
||||||
|
volatile rt_uint32_t LINECTRL[4];
|
||||||
|
volatile rt_uint32_t INTR[4];
|
||||||
|
volatile rt_uint32_t DATA[4];
|
||||||
|
volatile rt_uint32_t STAT[4];
|
||||||
|
volatile const rt_uint32_t DEBUG[4];
|
||||||
|
volatile rt_uint32_t ILPR[4];
|
||||||
|
volatile rt_uint32_t RS485CTRL[4];
|
||||||
|
volatile rt_uint32_t RS485ADRMATCH[4];
|
||||||
|
volatile rt_uint32_t RS485DLY[4];
|
||||||
|
volatile rt_uint32_t AUTOBAUD[4];
|
||||||
|
volatile rt_uint32_t CTRL3[4];
|
||||||
|
volatile rt_uint32_t ISO7816CTRL[4];
|
||||||
|
volatile rt_uint32_t ISO7816ERRCNT[4];
|
||||||
|
volatile rt_uint32_t ISO7816STATUS[4];
|
||||||
|
} HW_USART_TypeDef;
|
||||||
|
|
||||||
|
#define USART0 ((HW_USART_TypeDef *)UART0_BASE)
|
||||||
|
#define USART1 ((HW_USART_TypeDef *)UART1_BASE)
|
||||||
|
#define USART2 ((HW_USART_TypeDef *)UART2_BASE)
|
||||||
|
#define USART3 ((HW_USART_TypeDef *)UART3_BASE)
|
||||||
|
#define USART4 ((HW_USART_TypeDef *)UART4_BASE)
|
||||||
|
#define USART5 ((HW_USART_TypeDef *)UART5_BASE)
|
||||||
|
#define USART6 ((HW_USART_TypeDef *)UART6_BASE)
|
||||||
|
#define USART7 ((HW_USART_TypeDef *)UART7_BASE)
|
||||||
|
#define USART8 ((HW_USART_TypeDef *)UART8_BASE)
|
||||||
|
#define USART9 ((HW_USART_TypeDef *)UART9_BASE)
|
||||||
|
|
||||||
|
|
||||||
|
#define ASM_UART_INTR_RXIS (1UL << 4)
|
||||||
|
#define ASM_UART_INTR_TXIS (1UL << 5)
|
||||||
|
#define ASM_UART_INTR_RTIS (1UL << 6)
|
||||||
|
#define ASM_UART_INTR_RXIEN (1UL << 20)
|
||||||
|
#define ASM_UART_INTR_TXIEN (1UL << 21)
|
||||||
|
#define ASM_UART_INTR_RTIEN (1UL << 22)
|
||||||
|
|
||||||
|
|
||||||
|
#define UART_BAUD_DIVINT_MASK 0x003FFFC0UL
|
||||||
|
#define UART_BAUD_DIVFRAC_MASK 0x0000003FUL
|
||||||
|
#define UART_FIFO_ENABLE 0x00000010UL
|
||||||
|
#define MAIN_CLOCK_EXT12M 0
|
||||||
|
#define MAIN_CLOCK_SYSPLL 1
|
||||||
|
#define UART_INT_FIFO_LV_SEL_MASK 0x00770000UL
|
||||||
|
#define RXTIMEOUT_ENABLE 0x01000000UL
|
||||||
|
#define RXTIMEOUT_MASK 0x00FF0000UL
|
||||||
|
|
||||||
|
|
||||||
|
#define ASM_UART_CTRL0_SFTRST (1UL << 31)
|
||||||
|
#define ASM_UART_CTRL0_CLKGATE (1UL << 30)
|
||||||
|
#define ASM_UART_CTRL0_RXTO_ENABLE (1UL << 24)
|
||||||
|
|
||||||
|
#define ASM_UART_CTRL2_USARTEN (1UL << 0)
|
||||||
|
#define ASM_UART_CTRL2_TXE (1UL << 8)
|
||||||
|
#define ASM_UART_CTRL2_RXE (1UL << 9)
|
||||||
|
|
||||||
|
|
||||||
|
#define ASM_UART_LINECTRL_PEN (1UL << 1)
|
||||||
|
#define ASM_UART_LINECTRL_EPS (1UL << 2)
|
||||||
|
#define ASM_UART_LINECTRL_STP2 (1UL << 3)
|
||||||
|
#define ASM_UART_LINECTRL_FEN (1UL << 4)
|
||||||
|
#define ASM_UART_LINECTRL_WLEN5 (0UL << 5)
|
||||||
|
#define ASM_UART_LINECTRL_WLEN6 (1UL << 5)
|
||||||
|
#define ASM_UART_LINECTRL_WLEN7 (2UL << 5)
|
||||||
|
#define ASM_UART_LINECTRL_WLEN8 (3UL << 5)
|
||||||
|
#define ASM_UART_LINECTRL_SPS (1UL << 7)
|
||||||
|
|
||||||
|
#define ASM_UART_STAT_TXFF (1UL << 25)
|
||||||
|
#define ASM_UART_STAT_RXFE (1UL << 24)
|
||||||
|
|
||||||
|
extern void Hw_UartDisable(HW_USART_TypeDef* uartBase);
|
||||||
|
extern void Hw_UartEnable(HW_USART_TypeDef* uartBase);
|
||||||
|
extern void Hw_UartReset(HW_USART_TypeDef* uartBase);
|
||||||
|
extern void Hw_UartConfig(HW_USART_TypeDef* uartBase, int baudRate,
|
||||||
|
int dataBits, int stopBits, int parity);
|
||||||
|
extern void Hw_UartInit(int index);
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,261 @@
|
||||||
|
/* RT-Thread config file */
|
||||||
|
#ifndef __RTTHREAD_CFG_H__
|
||||||
|
#define __RTTHREAD_CFG_H__
|
||||||
|
|
||||||
|
/* RT_NAME_MAX*/
|
||||||
|
#define RT_NAME_MAX 32
|
||||||
|
|
||||||
|
/* RT_ALIGN_SIZE*/
|
||||||
|
#define RT_ALIGN_SIZE 4
|
||||||
|
|
||||||
|
/* PRIORITY_MAX */
|
||||||
|
#define RT_THREAD_PRIORITY_MAX 255
|
||||||
|
|
||||||
|
/* Tick per Second */
|
||||||
|
#define RT_TICK_PER_SECOND 100
|
||||||
|
|
||||||
|
/* SECTION: RT_DEBUG */
|
||||||
|
/* Thread Debug */
|
||||||
|
#define RT_DEBUG
|
||||||
|
//#define SCHEDULER_DEBUG
|
||||||
|
/* #define RT_THREAD_DEBUG */
|
||||||
|
|
||||||
|
#define RT_USING_OVERFLOW_CHECK
|
||||||
|
|
||||||
|
#define RT_USING_INTERRUPT_INFO
|
||||||
|
|
||||||
|
/* Using Hook */
|
||||||
|
#define RT_USING_HOOK
|
||||||
|
|
||||||
|
/* Using Software Timer */
|
||||||
|
#define RT_USING_TIMER_SOFT
|
||||||
|
#define RT_TIMER_THREAD_PRIO 8
|
||||||
|
#define RT_TIMER_THREAD_STACK_SIZE 512
|
||||||
|
#define RT_TIMER_TICK_PER_SECOND 10
|
||||||
|
|
||||||
|
/* SECTION: IPC */
|
||||||
|
/* Using Semaphore */
|
||||||
|
#define RT_USING_SEMAPHORE
|
||||||
|
|
||||||
|
/* Using Mutex */
|
||||||
|
#define RT_USING_MUTEX
|
||||||
|
|
||||||
|
/* Using Event */
|
||||||
|
#define RT_USING_EVENT
|
||||||
|
|
||||||
|
/* Using MailBox */
|
||||||
|
#define RT_USING_MAILBOX
|
||||||
|
|
||||||
|
/* Using Message Queue */
|
||||||
|
#define RT_USING_MESSAGEQUEUE
|
||||||
|
|
||||||
|
/* SECTION: Memory Management */
|
||||||
|
/* Using Memory Pool Management*/
|
||||||
|
#define RT_USING_MEMPOOL
|
||||||
|
|
||||||
|
/* Using Dynamic Heap Management */
|
||||||
|
#define RT_USING_HEAP
|
||||||
|
|
||||||
|
/* Using Small MM */
|
||||||
|
/* #define RT_USING_SMALL_MEM */
|
||||||
|
|
||||||
|
/* Using SLAB Allocator */
|
||||||
|
#define RT_USING_SLAB
|
||||||
|
|
||||||
|
/* SECTION: the runtime libc library */
|
||||||
|
/* the runtime libc library */
|
||||||
|
#define RT_USING_LIBC
|
||||||
|
#define RT_USING_PTHREADS
|
||||||
|
|
||||||
|
/* Using Module System */
|
||||||
|
//#define RT_USING_MODULE
|
||||||
|
//#define RT_USING_LIBDL
|
||||||
|
|
||||||
|
/* SECTION: Device System */
|
||||||
|
/* Using Device System */
|
||||||
|
#define RT_USING_DEVICE
|
||||||
|
|
||||||
|
#define RT_USING_DEVICE_IPC
|
||||||
|
#define RT_USING_SERIAL
|
||||||
|
|
||||||
|
/* SECTION: Console options */
|
||||||
|
#define RT_USING_CONSOLE
|
||||||
|
/* the buffer size of console */
|
||||||
|
#define RT_CONSOLEBUF_SIZE 128
|
||||||
|
#define RT_CONSOLE_DEVICE_NAME "uart3"
|
||||||
|
|
||||||
|
/* SECTION: finsh, a C-Express shell */
|
||||||
|
/* Using FinSH as Shell*/
|
||||||
|
#define RT_USING_FINSH
|
||||||
|
/* Using symbol table */
|
||||||
|
#define FINSH_USING_SYMTAB
|
||||||
|
#define FINSH_USING_DESCRIPTION
|
||||||
|
#define FINSH_THREAD_STACK_SIZE 4096
|
||||||
|
|
||||||
|
/* SECTION: C++ support */
|
||||||
|
/* Using C++ support */
|
||||||
|
/* #define RT_USING_CPLUSPLUS */
|
||||||
|
|
||||||
|
/* SECTION: Device filesystem support */
|
||||||
|
/* using DFS support */
|
||||||
|
//#define RT_USING_DFS
|
||||||
|
#define RT_USING_DFS_ELMFAT
|
||||||
|
/* use long file name feature */
|
||||||
|
#define RT_DFS_ELM_USE_LFN 2
|
||||||
|
#define RT_DFS_ELM_REENTRANT
|
||||||
|
/* define OEM code page */
|
||||||
|
#define RT_DFS_ELM_CODE_PAGE 936
|
||||||
|
/* Using OEM code page file */
|
||||||
|
// #define RT_DFS_ELM_CODE_PAGE_FILE
|
||||||
|
/* the max number of file length */
|
||||||
|
#define RT_DFS_ELM_MAX_LFN 128
|
||||||
|
/* #define RT_USING_DFS_YAFFS2 */
|
||||||
|
//#define RT_USING_DFS_DEVFS
|
||||||
|
|
||||||
|
#define RT_USING_DFS_NFS
|
||||||
|
#define RT_NFS_HOST_EXPORT "192.168.1.5:/"
|
||||||
|
|
||||||
|
#define DFS_USING_WORKDIR
|
||||||
|
|
||||||
|
/* the max number of mounted filesystem */
|
||||||
|
#define DFS_FILESYSTEMS_MAX 4
|
||||||
|
/* the max number of opened files */
|
||||||
|
#define DFS_FD_MAX 16
|
||||||
|
/* the max number of cached sector */
|
||||||
|
#define DFS_CACHE_MAX_NUM 4
|
||||||
|
|
||||||
|
/* Enable freemodbus protocol stack*/
|
||||||
|
/* #define RT_USING_MODBUS */
|
||||||
|
|
||||||
|
#define RT_USING_LED
|
||||||
|
|
||||||
|
//#define RT_USING_SDIO
|
||||||
|
|
||||||
|
#define RT_USING_I2C
|
||||||
|
#define RT_USING_I2C_BITOPS
|
||||||
|
|
||||||
|
/*#define RT_USING_DBGU*/
|
||||||
|
#define RT_USING_UART0
|
||||||
|
/* #define RT_USING_UART1 */
|
||||||
|
|
||||||
|
#define RT_USING_UART3
|
||||||
|
#define RT_USING_UART4
|
||||||
|
|
||||||
|
/* SECTION: lwip, a lightweight TCP/IP protocol stack */
|
||||||
|
/* Using lightweight TCP/IP protocol stack */
|
||||||
|
//#define RT_USING_LWIP
|
||||||
|
#define RT_LWIP_DNS
|
||||||
|
|
||||||
|
/* Trace LwIP protocol */
|
||||||
|
// #define RT_LWIP_DEBUG
|
||||||
|
|
||||||
|
/* Enable ICMP protocol */
|
||||||
|
#define RT_LWIP_ICMP
|
||||||
|
|
||||||
|
/* Enable IGMP protocol */
|
||||||
|
#define RT_LWIP_IGMP
|
||||||
|
|
||||||
|
/* Enable UDP protocol */
|
||||||
|
#define RT_LWIP_UDP
|
||||||
|
|
||||||
|
/* Enable TCP protocol */
|
||||||
|
#define RT_LWIP_TCP
|
||||||
|
|
||||||
|
/* the number of simulatenously active TCP connections*/
|
||||||
|
#define RT_LWIP_TCP_PCB_NUM 5
|
||||||
|
|
||||||
|
/* TCP sender buffer space */
|
||||||
|
#define RT_LWIP_TCP_SND_BUF 1024*10
|
||||||
|
|
||||||
|
/* TCP receive window. */
|
||||||
|
#define RT_LWIP_TCP_WND 1024*8
|
||||||
|
|
||||||
|
/* Enable SNMP protocol */
|
||||||
|
/* #define RT_LWIP_SNMP */
|
||||||
|
|
||||||
|
/* Using DHCP */
|
||||||
|
/* #define RT_LWIP_DHCP */
|
||||||
|
|
||||||
|
/* ip address of target */
|
||||||
|
#define RT_LWIP_IPADDR0 192
|
||||||
|
#define RT_LWIP_IPADDR1 168
|
||||||
|
#define RT_LWIP_IPADDR2 1
|
||||||
|
#define RT_LWIP_IPADDR3 30
|
||||||
|
|
||||||
|
/* gateway address of target */
|
||||||
|
#define RT_LWIP_GWADDR0 192
|
||||||
|
#define RT_LWIP_GWADDR1 168
|
||||||
|
#define RT_LWIP_GWADDR2 1
|
||||||
|
#define RT_LWIP_GWADDR3 1
|
||||||
|
|
||||||
|
/* mask address of target */
|
||||||
|
#define RT_LWIP_MSKADDR0 255
|
||||||
|
#define RT_LWIP_MSKADDR1 255
|
||||||
|
#define RT_LWIP_MSKADDR2 255
|
||||||
|
#define RT_LWIP_MSKADDR3 0
|
||||||
|
|
||||||
|
/* the number of blocks for pbuf */
|
||||||
|
#define RT_LWIP_PBUF_NUM 16
|
||||||
|
|
||||||
|
/* the number of simultaneously queued TCP */
|
||||||
|
#define RT_LWIP_TCP_SEG_NUM 40
|
||||||
|
|
||||||
|
/* thread priority of tcpip thread */
|
||||||
|
#define RT_LWIP_TCPTHREAD_PRIORITY 128
|
||||||
|
|
||||||
|
/* mail box size of tcpip thread to wait for */
|
||||||
|
#define RT_LWIP_TCPTHREAD_MBOX_SIZE 32
|
||||||
|
|
||||||
|
/* thread stack size of tcpip thread */
|
||||||
|
#define RT_LWIP_TCPTHREAD_STACKSIZE 4096
|
||||||
|
|
||||||
|
/* thread priority of ethnetif thread */
|
||||||
|
#define RT_LWIP_ETHTHREAD_PRIORITY 144
|
||||||
|
|
||||||
|
/* mail box size of ethnetif thread to wait for */
|
||||||
|
#define RT_LWIP_ETHTHREAD_MBOX_SIZE 32
|
||||||
|
|
||||||
|
/* thread stack size of ethnetif thread */
|
||||||
|
#define RT_LWIP_ETHTHREAD_STACKSIZE 1024
|
||||||
|
|
||||||
|
|
||||||
|
/* SECTION: RTGUI support */
|
||||||
|
/* using RTGUI support */
|
||||||
|
/* #define RT_USING_RTGUI */
|
||||||
|
|
||||||
|
/* name length of RTGUI object */
|
||||||
|
//#define RTGUI_NAME_MAX 16
|
||||||
|
/* support 16 weight font */
|
||||||
|
//#define RTGUI_USING_FONT16
|
||||||
|
/* support 16 weight font */
|
||||||
|
//#define RTGUI_USING_FONT12
|
||||||
|
/* support Chinese font */
|
||||||
|
//#define RTGUI_USING_FONTHZ
|
||||||
|
/* use DFS as file interface */
|
||||||
|
//#define RTGUI_USING_DFS_FILERW
|
||||||
|
/* use font file as Chinese font */
|
||||||
|
/* #define RTGUI_USING_HZ_FILE */
|
||||||
|
/* use Chinese bitmap font */
|
||||||
|
//#define RTGUI_USING_HZ_BMP
|
||||||
|
/* use small size in RTGUI */
|
||||||
|
/* #define RTGUI_USING_SMALL_SIZE */
|
||||||
|
/* use mouse cursor */
|
||||||
|
/* #define RTGUI_USING_MOUSE_CURSOR */
|
||||||
|
|
||||||
|
/* SECTION: FTK support */
|
||||||
|
/* using FTK support */
|
||||||
|
/* #define RT_USING_FTK */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Note on FTK:
|
||||||
|
*
|
||||||
|
* FTK depends :
|
||||||
|
* #define RT_USING_NEWLIB
|
||||||
|
* #define DFS_USING_WORKDIR
|
||||||
|
*
|
||||||
|
* And the maximal length must great than 64
|
||||||
|
* #define RT_DFS_ELM_MAX_LFN 128
|
||||||
|
*/
|
||||||
|
//#define RT_USING_CPU_FFS
|
||||||
|
#define RT_USING_COMPONENTS_INIT
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,139 @@
|
||||||
|
import os
|
||||||
|
ARCH = 'arm'
|
||||||
|
CPU = 'arm926'
|
||||||
|
# toolchains options
|
||||||
|
CROSS_TOOL = 'gcc'
|
||||||
|
|
||||||
|
#------- toolchains path -------------------------------------------------------
|
||||||
|
if os.getenv('RTT_CC'):
|
||||||
|
CROSS_TOOL = os.getenv('RTT_CC')
|
||||||
|
|
||||||
|
if CROSS_TOOL == 'gcc':
|
||||||
|
PLATFORM = 'gcc'
|
||||||
|
# EXEC_PATH = 'D:/ArdaArmTools/Sourcery_Lite/bin'
|
||||||
|
EXEC_PATH = 'D:/ArdaArmTools/GNUARM_4.9_2015q1/bin'
|
||||||
|
elif CROSS_TOOL == 'keil':
|
||||||
|
PLATFORM = 'armcc'
|
||||||
|
EXEC_PATH = 'C:/Keil_v5'
|
||||||
|
elif CROSS_TOOL == 'iar':
|
||||||
|
PLATFORM = 'iar'
|
||||||
|
IAR_PATH = 'C:/Program Files (x86)/IAR Systems/Embedded Workbench 7.0'
|
||||||
|
|
||||||
|
if os.getenv('RTT_EXEC_PATH'):
|
||||||
|
EXEC_PATH = os.getenv('RTT_EXEC_PATH')
|
||||||
|
|
||||||
|
#BUILD = 'debug'
|
||||||
|
BUILD = 'release'
|
||||||
|
|
||||||
|
CORE = 'arm926ej-s'
|
||||||
|
MAP_FILE = 'rtthread.map'
|
||||||
|
LINK_FILE = 'link_scripts/sdram'
|
||||||
|
TARGET_NAME = 'rtthread.bin'
|
||||||
|
|
||||||
|
#------- GCC settings ----------------------------------------------------------
|
||||||
|
if PLATFORM == 'gcc':
|
||||||
|
# toolchains
|
||||||
|
PREFIX = 'arm-none-eabi-'
|
||||||
|
#PREFIX = 'arm-none-linux-gnueabi-'
|
||||||
|
CC = PREFIX + 'gcc'
|
||||||
|
AS = PREFIX + 'gcc'
|
||||||
|
AR = PREFIX + 'ar'
|
||||||
|
LINK = PREFIX + 'gcc'
|
||||||
|
TARGET_EXT = 'axf'
|
||||||
|
SIZE = PREFIX + 'size'
|
||||||
|
OBJDUMP = PREFIX + 'objdump'
|
||||||
|
OBJCPY = PREFIX + 'objcopy'
|
||||||
|
|
||||||
|
DEVICE = ' -mcpu=arm926ej-s'
|
||||||
|
CFLAGS = DEVICE
|
||||||
|
AFLAGS = '-c'+ DEVICE + ' -x assembler-with-cpp'
|
||||||
|
AFLAGS += ' -Iplatform'
|
||||||
|
LFLAGS = DEVICE
|
||||||
|
LFLAGS += ' -Wl,--gc-sections,-cref,-Map=' + MAP_FILE
|
||||||
|
LFLAGS += ' -T ' + LINK_FILE + '.ld'
|
||||||
|
|
||||||
|
CPATH = ''
|
||||||
|
LPATH = ''
|
||||||
|
|
||||||
|
if BUILD == 'debug':
|
||||||
|
CFLAGS += ' -O0 -gdwarf-2'
|
||||||
|
AFLAGS += ' -gdwarf-2'
|
||||||
|
else:
|
||||||
|
CFLAGS += ' -O2'
|
||||||
|
|
||||||
|
POST_ACTION = OBJCPY + ' -O binary $TARGET ' + TARGET_NAME + '\n'
|
||||||
|
POST_ACTION += SIZE + ' $TARGET\n'
|
||||||
|
#------- Keil settings ---------------------------------------------------------
|
||||||
|
elif PLATFORM == 'armcc':
|
||||||
|
# toolchains
|
||||||
|
CC = 'armcc'
|
||||||
|
AS = 'armasm'
|
||||||
|
AR = 'armar'
|
||||||
|
LINK = 'armlink'
|
||||||
|
TARGET_EXT = 'axf'
|
||||||
|
EXEC_PATH += '/arm/armcc/bin/'
|
||||||
|
|
||||||
|
DEVICE = ' --cpu=' + CORE
|
||||||
|
CFLAGS = DEVICE + ' --apcs=interwork --diag_suppress=870'
|
||||||
|
AFLAGS = DEVICE + ' -Iplatform'
|
||||||
|
LFLAGS = DEVICE + ' --strict'
|
||||||
|
LFLAGS += ' --info sizes --info totals --info unused --info veneers'
|
||||||
|
LFLAGS += ' --list ' + MAP_FILE
|
||||||
|
LFLAGS += ' --scatter ' + LINK_FILE + '.scat'
|
||||||
|
|
||||||
|
if BUILD == 'debug':
|
||||||
|
CFLAGS += ' -g -O0'
|
||||||
|
AFLAGS += ' -g'
|
||||||
|
else:
|
||||||
|
CFLAGS += ' -O2'
|
||||||
|
|
||||||
|
POST_ACTION = 'fromelf --bin $TARGET --output ' + TARGET_NAME + ' \n'
|
||||||
|
POST_ACTION += 'fromelf -z $TARGET\n'
|
||||||
|
#------- IAR settings ----------------------------------------------------------
|
||||||
|
elif PLATFORM == 'iar':
|
||||||
|
# toolchains
|
||||||
|
CC = 'iccarm'
|
||||||
|
AS = 'iasmarm'
|
||||||
|
AR = 'iarchive'
|
||||||
|
LINK = 'ilinkarm'
|
||||||
|
TARGET_EXT = 'axf'
|
||||||
|
|
||||||
|
DEVICE = CORE
|
||||||
|
|
||||||
|
CFLAGS = '--cpu=' + DEVICE
|
||||||
|
CFLAGS += ' --diag_suppress Pa050'
|
||||||
|
CFLAGS += ' --no_cse'
|
||||||
|
CFLAGS += ' --no_unroll'
|
||||||
|
CFLAGS += ' --no_inline'
|
||||||
|
CFLAGS += ' --no_code_motion'
|
||||||
|
CFLAGS += ' --no_tbaa'
|
||||||
|
CFLAGS += ' --no_clustering'
|
||||||
|
CFLAGS += ' --no_scheduling'
|
||||||
|
|
||||||
|
CFLAGS += ' --endian=little'
|
||||||
|
CFLAGS += ' -e'
|
||||||
|
CFLAGS += ' --fpu=none'
|
||||||
|
CFLAGS += ' --dlib_config "' + IAR_PATH + '/arm/INC/c/DLib_Config_Normal.h"'
|
||||||
|
CFLAGS += ' --silent'
|
||||||
|
|
||||||
|
AFLAGS = '--cpu '+ DEVICE
|
||||||
|
AFLAGS += ' -s+'
|
||||||
|
AFLAGS += ' -w+'
|
||||||
|
AFLAGS += ' -r'
|
||||||
|
AFLAGS += ' --fpu none'
|
||||||
|
AFLAGS += ' -S'
|
||||||
|
AFLAGS += ' -Iplatform'
|
||||||
|
|
||||||
|
if BUILD == 'debug':
|
||||||
|
CFLAGS += ' --debug'
|
||||||
|
CFLAGS += ' -On'
|
||||||
|
else:
|
||||||
|
CFLAGS += ' -Oh'
|
||||||
|
|
||||||
|
LFLAGS = '--config ' + LINK_FILE +'.icf'
|
||||||
|
LFLAGS += ' --entry __iar_program_start'
|
||||||
|
LFLAGS += ' --map ' + MAP_FILE
|
||||||
|
LFLAGS += ' --silent'
|
||||||
|
|
||||||
|
EXEC_PATH = IAR_PATH + '/arm/bin/'
|
||||||
|
POST_ACTION = 'ielftool --silent --bin $TARGET ' + TARGET_NAME
|
||||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,10 @@
|
||||||
|
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||||
|
|
||||||
|
<workspace>
|
||||||
|
<project>
|
||||||
|
<path>$WS_DIR$\template.ewp</path>
|
||||||
|
</project>
|
||||||
|
<batchBuild/>
|
||||||
|
</workspace>
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -0,0 +1,175 @@
|
||||||
|
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||||
|
<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
|
||||||
|
|
||||||
|
<SchemaVersion>1.0</SchemaVersion>
|
||||||
|
|
||||||
|
<Header>### uVision Project, (C) Keil Software</Header>
|
||||||
|
|
||||||
|
<Extensions>
|
||||||
|
<cExt>*.c</cExt>
|
||||||
|
<aExt>*.s*; *.src; *.a*</aExt>
|
||||||
|
<oExt>*.obj</oExt>
|
||||||
|
<lExt>*.lib</lExt>
|
||||||
|
<tExt>*.txt; *.h; *.inc</tExt>
|
||||||
|
<pExt>*.plm</pExt>
|
||||||
|
<CppX>*.cpp</CppX>
|
||||||
|
<nMigrate>0</nMigrate>
|
||||||
|
</Extensions>
|
||||||
|
|
||||||
|
<DaveTm>
|
||||||
|
<dwLowDateTime>0</dwLowDateTime>
|
||||||
|
<dwHighDateTime>0</dwHighDateTime>
|
||||||
|
</DaveTm>
|
||||||
|
|
||||||
|
<Target>
|
||||||
|
<TargetName>rtthread</TargetName>
|
||||||
|
<ToolsetNumber>0x4</ToolsetNumber>
|
||||||
|
<ToolsetName>ARM-ADS</ToolsetName>
|
||||||
|
<TargetOption>
|
||||||
|
<CLKADS>18432000</CLKADS>
|
||||||
|
<OPTTT>
|
||||||
|
<gFlags>1</gFlags>
|
||||||
|
<BeepAtEnd>1</BeepAtEnd>
|
||||||
|
<RunSim>1</RunSim>
|
||||||
|
<RunTarget>0</RunTarget>
|
||||||
|
<RunAbUc>0</RunAbUc>
|
||||||
|
</OPTTT>
|
||||||
|
<OPTHX>
|
||||||
|
<HexSelection>1</HexSelection>
|
||||||
|
<FlashByte>65535</FlashByte>
|
||||||
|
<HexRangeLowAddress>0</HexRangeLowAddress>
|
||||||
|
<HexRangeHighAddress>0</HexRangeHighAddress>
|
||||||
|
<HexOffset>0</HexOffset>
|
||||||
|
</OPTHX>
|
||||||
|
<OPTLEX>
|
||||||
|
<PageWidth>79</PageWidth>
|
||||||
|
<PageLength>66</PageLength>
|
||||||
|
<TabStop>8</TabStop>
|
||||||
|
<ListingPath>.\Listings\</ListingPath>
|
||||||
|
</OPTLEX>
|
||||||
|
<ListingPage>
|
||||||
|
<CreateCListing>1</CreateCListing>
|
||||||
|
<CreateAListing>1</CreateAListing>
|
||||||
|
<CreateLListing>1</CreateLListing>
|
||||||
|
<CreateIListing>0</CreateIListing>
|
||||||
|
<AsmCond>1</AsmCond>
|
||||||
|
<AsmSymb>1</AsmSymb>
|
||||||
|
<AsmXref>0</AsmXref>
|
||||||
|
<CCond>1</CCond>
|
||||||
|
<CCode>0</CCode>
|
||||||
|
<CListInc>0</CListInc>
|
||||||
|
<CSymb>0</CSymb>
|
||||||
|
<LinkerCodeListing>0</LinkerCodeListing>
|
||||||
|
</ListingPage>
|
||||||
|
<OPTXL>
|
||||||
|
<LMap>1</LMap>
|
||||||
|
<LComments>1</LComments>
|
||||||
|
<LGenerateSymbols>1</LGenerateSymbols>
|
||||||
|
<LLibSym>1</LLibSym>
|
||||||
|
<LLines>1</LLines>
|
||||||
|
<LLocSym>1</LLocSym>
|
||||||
|
<LPubSym>1</LPubSym>
|
||||||
|
<LXref>0</LXref>
|
||||||
|
<LExpSel>0</LExpSel>
|
||||||
|
</OPTXL>
|
||||||
|
<OPTFL>
|
||||||
|
<tvExp>1</tvExp>
|
||||||
|
<tvExpOptDlg>0</tvExpOptDlg>
|
||||||
|
<IsCurrentTarget>1</IsCurrentTarget>
|
||||||
|
</OPTFL>
|
||||||
|
<CpuCode>16</CpuCode>
|
||||||
|
<Books>
|
||||||
|
<Book>
|
||||||
|
<Number>0</Number>
|
||||||
|
<Title>Datasheet</Title>
|
||||||
|
<Path>DATASHTS\ATMEL\AT91SAM9260_DS.PDF</Path>
|
||||||
|
</Book>
|
||||||
|
<Book>
|
||||||
|
<Number>1</Number>
|
||||||
|
<Title>Summary</Title>
|
||||||
|
<Path>DATASHTS\ATMEL\AT91SAM9260_DC.PDF</Path>
|
||||||
|
</Book>
|
||||||
|
</Books>
|
||||||
|
<DebugOpt>
|
||||||
|
<uSim>0</uSim>
|
||||||
|
<uTrg>1</uTrg>
|
||||||
|
<sLdApp>1</sLdApp>
|
||||||
|
<sGomain>1</sGomain>
|
||||||
|
<sRbreak>1</sRbreak>
|
||||||
|
<sRwatch>1</sRwatch>
|
||||||
|
<sRmem>1</sRmem>
|
||||||
|
<sRfunc>1</sRfunc>
|
||||||
|
<sRbox>1</sRbox>
|
||||||
|
<tLdApp>0</tLdApp>
|
||||||
|
<tGomain>0</tGomain>
|
||||||
|
<tRbreak>1</tRbreak>
|
||||||
|
<tRwatch>1</tRwatch>
|
||||||
|
<tRmem>1</tRmem>
|
||||||
|
<tRfunc>0</tRfunc>
|
||||||
|
<tRbox>1</tRbox>
|
||||||
|
<tRtrace>1</tRtrace>
|
||||||
|
<sRSysVw>1</sRSysVw>
|
||||||
|
<tRSysVw>1</tRSysVw>
|
||||||
|
<sRunDeb>0</sRunDeb>
|
||||||
|
<sLrtime>0</sLrtime>
|
||||||
|
<nTsel>5</nTsel>
|
||||||
|
<sDll></sDll>
|
||||||
|
<sDllPa></sDllPa>
|
||||||
|
<sDlgDll></sDlgDll>
|
||||||
|
<sDlgPa></sDlgPa>
|
||||||
|
<sIfile></sIfile>
|
||||||
|
<tDll></tDll>
|
||||||
|
<tDllPa></tDllPa>
|
||||||
|
<tDlgDll></tDlgDll>
|
||||||
|
<tDlgPa></tDlgPa>
|
||||||
|
<tIfile>.\jlink\at91sam9260.ini</tIfile>
|
||||||
|
<pMon>Segger\JLTAgdi.dll</pMon>
|
||||||
|
</DebugOpt>
|
||||||
|
<TargetDriverDllRegistry>
|
||||||
|
<SetRegEntry>
|
||||||
|
<Number>0</Number>
|
||||||
|
<Key>JLTAgdi</Key>
|
||||||
|
<Name>-O558 -J1 -Y1000 -Z1 -FO0 -FD200000 -FC800 -FN0</Name>
|
||||||
|
</SetRegEntry>
|
||||||
|
<SetRegEntry>
|
||||||
|
<Number>0</Number>
|
||||||
|
<Key>UL2ARM</Key>
|
||||||
|
<Name>-UV2077N9E -O47 -S0 -C0 -N00("ARM926EJ-S Core") -D00(0792603F) -L00(4) -FO7 -FD300000 -FC1000 -FN1 -FF0AT91SAM9_DF_P1056_CS1 -FS020000000 -FL083BE00)</Name>
|
||||||
|
</SetRegEntry>
|
||||||
|
</TargetDriverDllRegistry>
|
||||||
|
<Breakpoint/>
|
||||||
|
<Tracepoint>
|
||||||
|
<THDelay>0</THDelay>
|
||||||
|
</Tracepoint>
|
||||||
|
<DebugFlag>
|
||||||
|
<trace>0</trace>
|
||||||
|
<periodic>1</periodic>
|
||||||
|
<aLwin>0</aLwin>
|
||||||
|
<aCover>0</aCover>
|
||||||
|
<aSer1>0</aSer1>
|
||||||
|
<aSer2>0</aSer2>
|
||||||
|
<aPa>0</aPa>
|
||||||
|
<viewmode>0</viewmode>
|
||||||
|
<vrSel>0</vrSel>
|
||||||
|
<aSym>0</aSym>
|
||||||
|
<aTbox>0</aTbox>
|
||||||
|
<AscS1>0</AscS1>
|
||||||
|
<AscS2>0</AscS2>
|
||||||
|
<AscS3>0</AscS3>
|
||||||
|
<aSer3>0</aSer3>
|
||||||
|
<eProf>0</eProf>
|
||||||
|
<aLa>0</aLa>
|
||||||
|
<aPa1>0</aPa1>
|
||||||
|
<AscS4>0</AscS4>
|
||||||
|
<aSer4>0</aSer4>
|
||||||
|
<StkLoc>0</StkLoc>
|
||||||
|
<TrcWin>0</TrcWin>
|
||||||
|
<newCpu>0</newCpu>
|
||||||
|
<uProt>0</uProt>
|
||||||
|
</DebugFlag>
|
||||||
|
<LintExecutable></LintExecutable>
|
||||||
|
<LintConfigFile></LintConfigFile>
|
||||||
|
</TargetOption>
|
||||||
|
</Target>
|
||||||
|
|
||||||
|
</ProjectOpt>
|
||||||
|
|
@ -0,0 +1,408 @@
|
||||||
|
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||||
|
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
|
||||||
|
|
||||||
|
<SchemaVersion>1.1</SchemaVersion>
|
||||||
|
|
||||||
|
<Header>### uVision Project, (C) Keil Software</Header>
|
||||||
|
|
||||||
|
<Targets>
|
||||||
|
<Target>
|
||||||
|
<TargetName>rtthread</TargetName>
|
||||||
|
<ToolsetNumber>0x4</ToolsetNumber>
|
||||||
|
<ToolsetName>ARM-ADS</ToolsetName>
|
||||||
|
<TargetOption>
|
||||||
|
<TargetCommonOption>
|
||||||
|
<Device>AT91SAM9260</Device>
|
||||||
|
<Vendor>Atmel</Vendor>
|
||||||
|
<Cpu>IRAM(0x200000-0x200FFF) IRAM2(0x300000-0x300FFF) IROM(0x100000-0x107FFF) CLOCK(18432000) CPUTYPE(ARM926EJ-S)</Cpu>
|
||||||
|
<FlashUtilSpec></FlashUtilSpec>
|
||||||
|
<StartupFile>"STARTUP\Atmel\SAM9260.s" ("Atmel AT91SAM9260 Startup Code")</StartupFile>
|
||||||
|
<FlashDriverDll>UL2ARM(-UV2077N9E -O47 -S0 -C0 -N00("ARM926EJ-S Core") -D00(0792603F) -L00(4) -FO7 -FD300000 -FC1000 -FN1 -FF0AT91SAM9_DF_P1056_CS1 -FS020000000 -FL083BE00)</FlashDriverDll>
|
||||||
|
<DeviceId>4210</DeviceId>
|
||||||
|
<RegisterFile>AT91SAM9260.H</RegisterFile>
|
||||||
|
<MemoryEnv></MemoryEnv>
|
||||||
|
<Cmp></Cmp>
|
||||||
|
<Asm></Asm>
|
||||||
|
<Linker></Linker>
|
||||||
|
<OHString></OHString>
|
||||||
|
<InfinionOptionDll></InfinionOptionDll>
|
||||||
|
<SLE66CMisc></SLE66CMisc>
|
||||||
|
<SLE66AMisc></SLE66AMisc>
|
||||||
|
<SLE66LinkerMisc></SLE66LinkerMisc>
|
||||||
|
<SFDFile></SFDFile>
|
||||||
|
<bCustSvd>0</bCustSvd>
|
||||||
|
<UseEnv>0</UseEnv>
|
||||||
|
<BinPath></BinPath>
|
||||||
|
<IncludePath></IncludePath>
|
||||||
|
<LibPath></LibPath>
|
||||||
|
<RegisterFilePath>Atmel\SAM9260\</RegisterFilePath>
|
||||||
|
<DBRegisterFilePath>Atmel\SAM9260\</DBRegisterFilePath>
|
||||||
|
<TargetStatus>
|
||||||
|
<Error>0</Error>
|
||||||
|
<ExitCodeStop>0</ExitCodeStop>
|
||||||
|
<ButtonStop>0</ButtonStop>
|
||||||
|
<NotGenerated>0</NotGenerated>
|
||||||
|
<InvalidFlash>1</InvalidFlash>
|
||||||
|
</TargetStatus>
|
||||||
|
<OutputDirectory>.\Objects\</OutputDirectory>
|
||||||
|
<OutputName>template</OutputName>
|
||||||
|
<CreateExecutable>1</CreateExecutable>
|
||||||
|
<CreateLib>0</CreateLib>
|
||||||
|
<CreateHexFile>0</CreateHexFile>
|
||||||
|
<DebugInformation>1</DebugInformation>
|
||||||
|
<BrowseInformation>1</BrowseInformation>
|
||||||
|
<ListingPath>.\Listings\</ListingPath>
|
||||||
|
<HexFormatSelection>1</HexFormatSelection>
|
||||||
|
<Merge32K>0</Merge32K>
|
||||||
|
<CreateBatchFile>0</CreateBatchFile>
|
||||||
|
<BeforeCompile>
|
||||||
|
<RunUserProg1>0</RunUserProg1>
|
||||||
|
<RunUserProg2>0</RunUserProg2>
|
||||||
|
<UserProg1Name></UserProg1Name>
|
||||||
|
<UserProg2Name></UserProg2Name>
|
||||||
|
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||||
|
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||||
|
<nStopU1X>0</nStopU1X>
|
||||||
|
<nStopU2X>0</nStopU2X>
|
||||||
|
</BeforeCompile>
|
||||||
|
<BeforeMake>
|
||||||
|
<RunUserProg1>0</RunUserProg1>
|
||||||
|
<RunUserProg2>0</RunUserProg2>
|
||||||
|
<UserProg1Name></UserProg1Name>
|
||||||
|
<UserProg2Name></UserProg2Name>
|
||||||
|
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||||
|
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||||
|
<nStopB1X>0</nStopB1X>
|
||||||
|
<nStopB2X>0</nStopB2X>
|
||||||
|
</BeforeMake>
|
||||||
|
<AfterMake>
|
||||||
|
<RunUserProg1>0</RunUserProg1>
|
||||||
|
<RunUserProg2>0</RunUserProg2>
|
||||||
|
<UserProg1Name></UserProg1Name>
|
||||||
|
<UserProg2Name></UserProg2Name>
|
||||||
|
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||||
|
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||||
|
</AfterMake>
|
||||||
|
<SelectedForBatchBuild>0</SelectedForBatchBuild>
|
||||||
|
<SVCSIdString></SVCSIdString>
|
||||||
|
</TargetCommonOption>
|
||||||
|
<CommonProperty>
|
||||||
|
<UseCPPCompiler>0</UseCPPCompiler>
|
||||||
|
<RVCTCodeConst>0</RVCTCodeConst>
|
||||||
|
<RVCTZI>0</RVCTZI>
|
||||||
|
<RVCTOtherData>0</RVCTOtherData>
|
||||||
|
<ModuleSelection>0</ModuleSelection>
|
||||||
|
<IncludeInBuild>1</IncludeInBuild>
|
||||||
|
<AlwaysBuild>0</AlwaysBuild>
|
||||||
|
<GenerateAssemblyFile>0</GenerateAssemblyFile>
|
||||||
|
<AssembleAssemblyFile>0</AssembleAssemblyFile>
|
||||||
|
<PublicsOnly>0</PublicsOnly>
|
||||||
|
<StopOnExitCode>3</StopOnExitCode>
|
||||||
|
<CustomArgument></CustomArgument>
|
||||||
|
<IncludeLibraryModules></IncludeLibraryModules>
|
||||||
|
<ComprImg>1</ComprImg>
|
||||||
|
</CommonProperty>
|
||||||
|
<DllOption>
|
||||||
|
<SimDllName>SARM.DLL</SimDllName>
|
||||||
|
<SimDllArguments>-cAT91SAM9260</SimDllArguments>
|
||||||
|
<SimDlgDll>DARMATS9.DLL</SimDlgDll>
|
||||||
|
<SimDlgDllArguments>-p91SAM9260</SimDlgDllArguments>
|
||||||
|
<TargetDllName>SARM.DLL</TargetDllName>
|
||||||
|
<TargetDllArguments></TargetDllArguments>
|
||||||
|
<TargetDlgDll>TARMATS9.DLL</TargetDlgDll>
|
||||||
|
<TargetDlgDllArguments>-p91SAM9260</TargetDlgDllArguments>
|
||||||
|
</DllOption>
|
||||||
|
<DebugOption>
|
||||||
|
<OPTHX>
|
||||||
|
<HexSelection>1</HexSelection>
|
||||||
|
<HexRangeLowAddress>0</HexRangeLowAddress>
|
||||||
|
<HexRangeHighAddress>0</HexRangeHighAddress>
|
||||||
|
<HexOffset>0</HexOffset>
|
||||||
|
<Oh166RecLen>16</Oh166RecLen>
|
||||||
|
</OPTHX>
|
||||||
|
<Simulator>
|
||||||
|
<UseSimulator>0</UseSimulator>
|
||||||
|
<LoadApplicationAtStartup>1</LoadApplicationAtStartup>
|
||||||
|
<RunToMain>1</RunToMain>
|
||||||
|
<RestoreBreakpoints>1</RestoreBreakpoints>
|
||||||
|
<RestoreWatchpoints>1</RestoreWatchpoints>
|
||||||
|
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
|
||||||
|
<RestoreFunctions>1</RestoreFunctions>
|
||||||
|
<RestoreToolbox>1</RestoreToolbox>
|
||||||
|
<LimitSpeedToRealTime>0</LimitSpeedToRealTime>
|
||||||
|
<RestoreSysVw>1</RestoreSysVw>
|
||||||
|
</Simulator>
|
||||||
|
<Target>
|
||||||
|
<UseTarget>1</UseTarget>
|
||||||
|
<LoadApplicationAtStartup>0</LoadApplicationAtStartup>
|
||||||
|
<RunToMain>0</RunToMain>
|
||||||
|
<RestoreBreakpoints>1</RestoreBreakpoints>
|
||||||
|
<RestoreWatchpoints>1</RestoreWatchpoints>
|
||||||
|
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
|
||||||
|
<RestoreFunctions>0</RestoreFunctions>
|
||||||
|
<RestoreToolbox>1</RestoreToolbox>
|
||||||
|
<RestoreTracepoints>1</RestoreTracepoints>
|
||||||
|
<RestoreSysVw>1</RestoreSysVw>
|
||||||
|
</Target>
|
||||||
|
<RunDebugAfterBuild>0</RunDebugAfterBuild>
|
||||||
|
<TargetSelection>5</TargetSelection>
|
||||||
|
<SimDlls>
|
||||||
|
<CpuDll></CpuDll>
|
||||||
|
<CpuDllArguments></CpuDllArguments>
|
||||||
|
<PeripheralDll></PeripheralDll>
|
||||||
|
<PeripheralDllArguments></PeripheralDllArguments>
|
||||||
|
<InitializationFile></InitializationFile>
|
||||||
|
</SimDlls>
|
||||||
|
<TargetDlls>
|
||||||
|
<CpuDll></CpuDll>
|
||||||
|
<CpuDllArguments></CpuDllArguments>
|
||||||
|
<PeripheralDll></PeripheralDll>
|
||||||
|
<PeripheralDllArguments></PeripheralDllArguments>
|
||||||
|
<InitializationFile>.\jlink\at91sam9260.ini</InitializationFile>
|
||||||
|
<Driver>Segger\JLTAgdi.dll</Driver>
|
||||||
|
</TargetDlls>
|
||||||
|
</DebugOption>
|
||||||
|
<Utilities>
|
||||||
|
<Flash1>
|
||||||
|
<UseTargetDll>1</UseTargetDll>
|
||||||
|
<UseExternalTool>0</UseExternalTool>
|
||||||
|
<RunIndependent>0</RunIndependent>
|
||||||
|
<UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
|
||||||
|
<Capability>1</Capability>
|
||||||
|
<DriverSelection>4096</DriverSelection>
|
||||||
|
</Flash1>
|
||||||
|
<bUseTDR>1</bUseTDR>
|
||||||
|
<Flash2>BIN\UL2ARM.DLL</Flash2>
|
||||||
|
<Flash3>"" ()</Flash3>
|
||||||
|
<Flash4>.\jlink\at91sam9260.ini</Flash4>
|
||||||
|
<pFcarmOut></pFcarmOut>
|
||||||
|
<pFcarmGrp></pFcarmGrp>
|
||||||
|
<pFcArmRoot></pFcArmRoot>
|
||||||
|
<FcArmLst>0</FcArmLst>
|
||||||
|
</Utilities>
|
||||||
|
<TargetArmAds>
|
||||||
|
<ArmAdsMisc>
|
||||||
|
<GenerateListings>0</GenerateListings>
|
||||||
|
<asHll>1</asHll>
|
||||||
|
<asAsm>1</asAsm>
|
||||||
|
<asMacX>1</asMacX>
|
||||||
|
<asSyms>1</asSyms>
|
||||||
|
<asFals>1</asFals>
|
||||||
|
<asDbgD>1</asDbgD>
|
||||||
|
<asForm>1</asForm>
|
||||||
|
<ldLst>0</ldLst>
|
||||||
|
<ldmm>1</ldmm>
|
||||||
|
<ldXref>1</ldXref>
|
||||||
|
<BigEnd>0</BigEnd>
|
||||||
|
<AdsALst>1</AdsALst>
|
||||||
|
<AdsACrf>1</AdsACrf>
|
||||||
|
<AdsANop>0</AdsANop>
|
||||||
|
<AdsANot>0</AdsANot>
|
||||||
|
<AdsLLst>1</AdsLLst>
|
||||||
|
<AdsLmap>1</AdsLmap>
|
||||||
|
<AdsLcgr>1</AdsLcgr>
|
||||||
|
<AdsLsym>1</AdsLsym>
|
||||||
|
<AdsLszi>1</AdsLszi>
|
||||||
|
<AdsLtoi>1</AdsLtoi>
|
||||||
|
<AdsLsun>1</AdsLsun>
|
||||||
|
<AdsLven>1</AdsLven>
|
||||||
|
<AdsLsxf>1</AdsLsxf>
|
||||||
|
<RvctClst>0</RvctClst>
|
||||||
|
<GenPPlst>0</GenPPlst>
|
||||||
|
<AdsCpuType>ARM926EJ-S</AdsCpuType>
|
||||||
|
<RvctDeviceName></RvctDeviceName>
|
||||||
|
<mOS>0</mOS>
|
||||||
|
<uocRom>0</uocRom>
|
||||||
|
<uocRam>0</uocRam>
|
||||||
|
<hadIROM>1</hadIROM>
|
||||||
|
<hadIRAM>1</hadIRAM>
|
||||||
|
<hadXRAM>0</hadXRAM>
|
||||||
|
<uocXRam>0</uocXRam>
|
||||||
|
<RvdsVP>0</RvdsVP>
|
||||||
|
<hadIRAM2>1</hadIRAM2>
|
||||||
|
<hadIROM2>0</hadIROM2>
|
||||||
|
<StupSel>8</StupSel>
|
||||||
|
<useUlib>0</useUlib>
|
||||||
|
<EndSel>0</EndSel>
|
||||||
|
<uLtcg>0</uLtcg>
|
||||||
|
<RoSelD>3</RoSelD>
|
||||||
|
<RwSelD>3</RwSelD>
|
||||||
|
<CodeSel>0</CodeSel>
|
||||||
|
<OptFeed>0</OptFeed>
|
||||||
|
<NoZi1>0</NoZi1>
|
||||||
|
<NoZi2>0</NoZi2>
|
||||||
|
<NoZi3>0</NoZi3>
|
||||||
|
<NoZi4>0</NoZi4>
|
||||||
|
<NoZi5>0</NoZi5>
|
||||||
|
<Ro1Chk>1</Ro1Chk>
|
||||||
|
<Ro2Chk>0</Ro2Chk>
|
||||||
|
<Ro3Chk>0</Ro3Chk>
|
||||||
|
<Ir1Chk>0</Ir1Chk>
|
||||||
|
<Ir2Chk>0</Ir2Chk>
|
||||||
|
<Ra1Chk>1</Ra1Chk>
|
||||||
|
<Ra2Chk>0</Ra2Chk>
|
||||||
|
<Ra3Chk>0</Ra3Chk>
|
||||||
|
<Im1Chk>0</Im1Chk>
|
||||||
|
<Im2Chk>0</Im2Chk>
|
||||||
|
<OnChipMemories>
|
||||||
|
<Ocm1>
|
||||||
|
<Type>0</Type>
|
||||||
|
<StartAddress>0x0</StartAddress>
|
||||||
|
<Size>0x0</Size>
|
||||||
|
</Ocm1>
|
||||||
|
<Ocm2>
|
||||||
|
<Type>0</Type>
|
||||||
|
<StartAddress>0x0</StartAddress>
|
||||||
|
<Size>0x0</Size>
|
||||||
|
</Ocm2>
|
||||||
|
<Ocm3>
|
||||||
|
<Type>0</Type>
|
||||||
|
<StartAddress>0x0</StartAddress>
|
||||||
|
<Size>0x0</Size>
|
||||||
|
</Ocm3>
|
||||||
|
<Ocm4>
|
||||||
|
<Type>0</Type>
|
||||||
|
<StartAddress>0x0</StartAddress>
|
||||||
|
<Size>0x0</Size>
|
||||||
|
</Ocm4>
|
||||||
|
<Ocm5>
|
||||||
|
<Type>0</Type>
|
||||||
|
<StartAddress>0x0</StartAddress>
|
||||||
|
<Size>0x0</Size>
|
||||||
|
</Ocm5>
|
||||||
|
<Ocm6>
|
||||||
|
<Type>0</Type>
|
||||||
|
<StartAddress>0x0</StartAddress>
|
||||||
|
<Size>0x0</Size>
|
||||||
|
</Ocm6>
|
||||||
|
<IRAM>
|
||||||
|
<Type>0</Type>
|
||||||
|
<StartAddress>0x200000</StartAddress>
|
||||||
|
<Size>0x1000</Size>
|
||||||
|
</IRAM>
|
||||||
|
<IROM>
|
||||||
|
<Type>1</Type>
|
||||||
|
<StartAddress>0x100000</StartAddress>
|
||||||
|
<Size>0x8000</Size>
|
||||||
|
</IROM>
|
||||||
|
<XRAM>
|
||||||
|
<Type>0</Type>
|
||||||
|
<StartAddress>0x0</StartAddress>
|
||||||
|
<Size>0x0</Size>
|
||||||
|
</XRAM>
|
||||||
|
<OCR_RVCT1>
|
||||||
|
<Type>1</Type>
|
||||||
|
<StartAddress>0x20000000</StartAddress>
|
||||||
|
<Size>0x800000</Size>
|
||||||
|
</OCR_RVCT1>
|
||||||
|
<OCR_RVCT2>
|
||||||
|
<Type>1</Type>
|
||||||
|
<StartAddress>0x0</StartAddress>
|
||||||
|
<Size>0x0</Size>
|
||||||
|
</OCR_RVCT2>
|
||||||
|
<OCR_RVCT3>
|
||||||
|
<Type>1</Type>
|
||||||
|
<StartAddress>0x0</StartAddress>
|
||||||
|
<Size>0x0</Size>
|
||||||
|
</OCR_RVCT3>
|
||||||
|
<OCR_RVCT4>
|
||||||
|
<Type>1</Type>
|
||||||
|
<StartAddress>0x100000</StartAddress>
|
||||||
|
<Size>0x8000</Size>
|
||||||
|
</OCR_RVCT4>
|
||||||
|
<OCR_RVCT5>
|
||||||
|
<Type>1</Type>
|
||||||
|
<StartAddress>0x0</StartAddress>
|
||||||
|
<Size>0x0</Size>
|
||||||
|
</OCR_RVCT5>
|
||||||
|
<OCR_RVCT6>
|
||||||
|
<Type>0</Type>
|
||||||
|
<StartAddress>0x20800000</StartAddress>
|
||||||
|
<Size>0x1800000</Size>
|
||||||
|
</OCR_RVCT6>
|
||||||
|
<OCR_RVCT7>
|
||||||
|
<Type>0</Type>
|
||||||
|
<StartAddress>0x0</StartAddress>
|
||||||
|
<Size>0x0</Size>
|
||||||
|
</OCR_RVCT7>
|
||||||
|
<OCR_RVCT8>
|
||||||
|
<Type>0</Type>
|
||||||
|
<StartAddress>0x0</StartAddress>
|
||||||
|
<Size>0x0</Size>
|
||||||
|
</OCR_RVCT8>
|
||||||
|
<OCR_RVCT9>
|
||||||
|
<Type>0</Type>
|
||||||
|
<StartAddress>0x200000</StartAddress>
|
||||||
|
<Size>0x1000</Size>
|
||||||
|
</OCR_RVCT9>
|
||||||
|
<OCR_RVCT10>
|
||||||
|
<Type>0</Type>
|
||||||
|
<StartAddress>0x300000</StartAddress>
|
||||||
|
<Size>0x1000</Size>
|
||||||
|
</OCR_RVCT10>
|
||||||
|
</OnChipMemories>
|
||||||
|
<RvctStartVector></RvctStartVector>
|
||||||
|
</ArmAdsMisc>
|
||||||
|
<Cads>
|
||||||
|
<interw>1</interw>
|
||||||
|
<Optim>1</Optim>
|
||||||
|
<oTime>0</oTime>
|
||||||
|
<SplitLS>0</SplitLS>
|
||||||
|
<OneElfS>0</OneElfS>
|
||||||
|
<Strict>0</Strict>
|
||||||
|
<EnumInt>0</EnumInt>
|
||||||
|
<PlainCh>0</PlainCh>
|
||||||
|
<Ropi>0</Ropi>
|
||||||
|
<Rwpi>0</Rwpi>
|
||||||
|
<wLevel>2</wLevel>
|
||||||
|
<uThumb>0</uThumb>
|
||||||
|
<uSurpInc>0</uSurpInc>
|
||||||
|
<uC99>0</uC99>
|
||||||
|
<useXO>0</useXO>
|
||||||
|
<VariousControls>
|
||||||
|
<MiscControls></MiscControls>
|
||||||
|
<Define></Define>
|
||||||
|
<Undefine></Undefine>
|
||||||
|
<IncludePath></IncludePath>
|
||||||
|
</VariousControls>
|
||||||
|
</Cads>
|
||||||
|
<Aads>
|
||||||
|
<interw>1</interw>
|
||||||
|
<Ropi>0</Ropi>
|
||||||
|
<Rwpi>0</Rwpi>
|
||||||
|
<thumb>0</thumb>
|
||||||
|
<SplitLS>0</SplitLS>
|
||||||
|
<SwStkChk>0</SwStkChk>
|
||||||
|
<NoWarn>0</NoWarn>
|
||||||
|
<uSurpInc>0</uSurpInc>
|
||||||
|
<useXO>0</useXO>
|
||||||
|
<VariousControls>
|
||||||
|
<MiscControls></MiscControls>
|
||||||
|
<Define></Define>
|
||||||
|
<Undefine></Undefine>
|
||||||
|
<IncludePath></IncludePath>
|
||||||
|
</VariousControls>
|
||||||
|
</Aads>
|
||||||
|
<LDads>
|
||||||
|
<umfTarg>0</umfTarg>
|
||||||
|
<Ropi>0</Ropi>
|
||||||
|
<Rwpi>0</Rwpi>
|
||||||
|
<noStLib>0</noStLib>
|
||||||
|
<RepFail>1</RepFail>
|
||||||
|
<useFile>0</useFile>
|
||||||
|
<TextAddressRange>0x20000000</TextAddressRange>
|
||||||
|
<DataAddressRange>0x20800000</DataAddressRange>
|
||||||
|
<pXoBase></pXoBase>
|
||||||
|
<ScatterFile>.\at91sam9260_ram.scat</ScatterFile>
|
||||||
|
<IncludeLibs></IncludeLibs>
|
||||||
|
<IncludeLibsPath></IncludeLibsPath>
|
||||||
|
<Misc></Misc>
|
||||||
|
<LinkerInputFile></LinkerInputFile>
|
||||||
|
<DisabledWarnings></DisabledWarnings>
|
||||||
|
</LDads>
|
||||||
|
</TargetArmAds>
|
||||||
|
</TargetOption>
|
||||||
|
</Target>
|
||||||
|
</Targets>
|
||||||
|
|
||||||
|
</Project>
|
||||||
Loading…
Reference in New Issue