diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/BOARDS/board.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/BOARDS/board.h new file mode 100644 index 0000000000..fbdd094c74 --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/BOARDS/board.h @@ -0,0 +1,121 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief Standard board header file. + * + * This file includes the appropriate board header file according to the + * defined board. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#include + +/*! \name Base Boards + */ +//! @{ +#define EVK1100 1 //!< AT32UC3A EVK1100 board. +#define EVK1101 2 //!< AT32UC3B EVK1101 board. +#define UC3C_EK 3 //!< AT32UC3C UC3C_EK board. +#define EVK1104 4 //!< AT32UC3A3 EVK1104 board. +#define EVK1105 5 //!< AT32UC3A EVK1105 board. +#define STK1000 6 //!< AT32AP7000 STK1000 board. +#define NGW100 7 //!< AT32AP7000 NGW100 board. +#define STK600_RCUC3L0 8 //!< STK600 RCUC3L0 board. +#define UC3L_EK 9 //!< AT32UC3L-EK board. +#define USER_BOARD 99 //!< User-reserved board (if any). +//! @} + +/*! \name Extension Boards + */ +//! @{ +#define EXT1102 1 //!< AT32UC3B EXT1102 board. +#define MC300 2 //!< AT32UC3 MC300 board. +#define USER_EXT_BOARD 99 //!< User-reserved extension board (if any). +//! @} + +#if BOARD == EVK1100 + #include "EVK1100/evk1100.h" +#elif BOARD == EVK1101 + #include "EVK1101/evk1101.h" +#elif BOARD == UC3C_EK + #include "UC3C_EK/uc3c_ek.h" +#elif BOARD == EVK1104 + #include "EVK1104/evk1104.h" +#elif BOARD == EVK1105 + #include "EVK1105/evk1105.h" +#elif BOARD == STK1000 + #include "STK1000/stk1000.h" +#elif BOARD == NGW100 + #include "NGW100/ngw100.h" +#elif BOARD == STK600_RCUC3L0 + #include "STK600/RCUC3L0/stk600_rcuc3l0.h" +#elif BOARD == UC3L_EK + #include "UC3L_EK/uc3l_ek.h" +#elif BOARD == USER_BOARD + // User-reserved area: #include the header file of your board here (if any). + #include "user_board.h" +#else + #error No known AVR32 board defined +#endif + +#if (defined EXT_BOARD) + #if EXT_BOARD == EXT1102 + #include "EXT1102/ext1102.h" + #elif EXT_BOARD == MC300 + #include "MC300/mc300.h" + #elif EXT_BOARD == USER_EXT_BOARD + // User-reserved area: #include the header file of your extension board here + // (if any). + #endif +#endif + + +#ifndef FRCOSC + #define FRCOSC AVR32_PM_RCOSC_FREQUENCY //!< Default RCOsc frequency. +#endif + + +#endif // _BOARD_H_ diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.c b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.c new file mode 100644 index 0000000000..f0d653d407 --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.c @@ -0,0 +1,1117 @@ +/* This source file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief FLASHC driver for AVR32 UC3. + * + * AVR32 Flash Controller driver module. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices with a FLASHC module can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#include +#include +#include "compiler.h" +#include "flashc.h" + + +/*! \name FLASHC Writable Bit-Field Registers + */ +//! @{ + +typedef union +{ + unsigned long fcr; + avr32_flashc_fcr_t FCR; +} u_avr32_flashc_fcr_t; + +typedef union +{ + unsigned long fcmd; + avr32_flashc_fcmd_t FCMD; +} u_avr32_flashc_fcmd_t; + +//! @} + + +/*! \name Flash Properties + */ +//! @{ + + +unsigned int flashc_get_flash_size(void) +{ +#if (defined AVR32_FLASHC_300_H_INCLUDED) + static const unsigned int FLASH_SIZE[1 << AVR32_FLASHC_PR_FSZ_SIZE] = + { + 32 << 10, + 64 << 10, + 128 << 10, + 256 << 10, + 384 << 10, + 512 << 10, + 768 << 10, + 1024 << 10 + }; + return FLASH_SIZE[(AVR32_FLASHC.pr & AVR32_FLASHC_PR_FSZ_MASK) >> AVR32_FLASHC_PR_FSZ_OFFSET]; +#else + static const unsigned int FLASH_SIZE[1 << AVR32_FLASHC_FSR_FSZ_SIZE] = + { + 32 << 10, + 64 << 10, + 128 << 10, + 256 << 10, + 384 << 10, + 512 << 10, + 768 << 10, + 1024 << 10 + }; + return FLASH_SIZE[(AVR32_FLASHC.fsr & AVR32_FLASHC_FSR_FSZ_MASK) >> AVR32_FLASHC_FSR_FSZ_OFFSET]; +#endif +} + + +unsigned int flashc_get_page_count(void) +{ + return flashc_get_flash_size() / AVR32_FLASHC_PAGE_SIZE; +} + + +unsigned int flashc_get_page_count_per_region(void) +{ + return flashc_get_page_count() / AVR32_FLASHC_REGIONS; +} + + +unsigned int flashc_get_page_region(int page_number) +{ + return ((page_number >= 0) ? page_number : flashc_get_page_number()) / flashc_get_page_count_per_region(); +} + + +unsigned int flashc_get_region_first_page_number(unsigned int region) +{ + return region * flashc_get_page_count_per_region(); +} + + +//! @} + + +/*! \name FLASHC Control + */ +//! @{ + + +unsigned int flashc_get_wait_state(void) +{ + return (AVR32_FLASHC.fcr & AVR32_FLASHC_FCR_FWS_MASK) >> AVR32_FLASHC_FCR_FWS_OFFSET; +} + + +void flashc_set_wait_state(unsigned int wait_state) +{ + u_avr32_flashc_fcr_t u_avr32_flashc_fcr = {AVR32_FLASHC.fcr}; + u_avr32_flashc_fcr.FCR.fws = wait_state; + AVR32_FLASHC.fcr = u_avr32_flashc_fcr.fcr; +} + + +Bool flashc_is_ready_int_enabled(void) +{ + return ((AVR32_FLASHC.fcr & AVR32_FLASHC_FCR_FRDY_MASK) != 0); +} + + +void flashc_enable_ready_int(Bool enable) +{ + u_avr32_flashc_fcr_t u_avr32_flashc_fcr = {AVR32_FLASHC.fcr}; + u_avr32_flashc_fcr.FCR.frdy = (enable != FALSE); + AVR32_FLASHC.fcr = u_avr32_flashc_fcr.fcr; +} + + +Bool flashc_is_lock_error_int_enabled(void) +{ + return ((AVR32_FLASHC.fcr & AVR32_FLASHC_FCR_LOCKE_MASK) != 0); +} + + +void flashc_enable_lock_error_int(Bool enable) +{ + u_avr32_flashc_fcr_t u_avr32_flashc_fcr = {AVR32_FLASHC.fcr}; + u_avr32_flashc_fcr.FCR.locke = (enable != FALSE); + AVR32_FLASHC.fcr = u_avr32_flashc_fcr.fcr; +} + + +Bool flashc_is_prog_error_int_enabled(void) +{ + return ((AVR32_FLASHC.fcr & AVR32_FLASHC_FCR_PROGE_MASK) != 0); +} + + +void flashc_enable_prog_error_int(Bool enable) +{ + u_avr32_flashc_fcr_t u_avr32_flashc_fcr = {AVR32_FLASHC.fcr}; + u_avr32_flashc_fcr.FCR.proge = (enable != FALSE); + AVR32_FLASHC.fcr = u_avr32_flashc_fcr.fcr; +} + + +//! @} + + +/*! \name FLASHC Status + */ +//! @{ + + +Bool flashc_is_ready(void) +{ + return ((AVR32_FLASHC.fsr & AVR32_FLASHC_FSR_FRDY_MASK) != 0); +} + + +void flashc_default_wait_until_ready(void) +{ + while (!flashc_is_ready()); +} + + +void (*volatile flashc_wait_until_ready)(void) = flashc_default_wait_until_ready; + + +/*! \brief Gets the error status of the FLASHC. + * + * \return The error status of the FLASHC built up from + * \c AVR32_FLASHC_FSR_LOCKE_MASK and \c AVR32_FLASHC_FSR_PROGE_MASK. + * + * \warning This hardware error status is cleared by all functions reading the + * Flash Status Register (FSR). This function is therefore not part of + * the driver's API which instead presents \ref flashc_is_lock_error + * and \ref flashc_is_programming_error. + */ +static unsigned int flashc_get_error_status(void) +{ + return AVR32_FLASHC.fsr & (AVR32_FLASHC_FSR_LOCKE_MASK | + AVR32_FLASHC_FSR_PROGE_MASK); +} + + +//! Sticky error status of the FLASHC. +//! This variable is updated by functions that issue FLASHC commands. It +//! contains the cumulated FLASHC error status of all the FLASHC commands issued +//! by a function. +static unsigned int flashc_error_status = 0; + + +Bool flashc_is_lock_error(void) +{ + return ((flashc_error_status & AVR32_FLASHC_FSR_LOCKE_MASK) != 0); +} + + +Bool flashc_is_programming_error(void) +{ + return ((flashc_error_status & AVR32_FLASHC_FSR_PROGE_MASK) != 0); +} + + +//! @} + + +/*! \name FLASHC Command Control + */ +//! @{ + + +unsigned int flashc_get_command(void) +{ + return (AVR32_FLASHC.fcmd & AVR32_FLASHC_FCMD_CMD_MASK) >> AVR32_FLASHC_FCMD_CMD_OFFSET; +} + + +unsigned int flashc_get_page_number(void) +{ + return (AVR32_FLASHC.fcmd & AVR32_FLASHC_FCMD_PAGEN_MASK) >> AVR32_FLASHC_FCMD_PAGEN_OFFSET; +} + + +void flashc_issue_command(unsigned int command, int page_number) +{ + u_avr32_flashc_fcmd_t u_avr32_flashc_fcmd; + flashc_wait_until_ready(); + u_avr32_flashc_fcmd.fcmd = AVR32_FLASHC.fcmd; + u_avr32_flashc_fcmd.FCMD.cmd = command; + if (page_number >= 0) u_avr32_flashc_fcmd.FCMD.pagen = page_number; + u_avr32_flashc_fcmd.FCMD.key = AVR32_FLASHC_FCMD_KEY_KEY; + AVR32_FLASHC.fcmd = u_avr32_flashc_fcmd.fcmd; + flashc_error_status = flashc_get_error_status(); + flashc_wait_until_ready(); +} + + +//! @} + + +/*! \name FLASHC Global Commands + */ +//! @{ + + +void flashc_no_operation(void) +{ + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_NOP, -1); +} + + +void flashc_erase_all(void) +{ + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_EA, -1); +} + + +//! @} + + +/*! \name FLASHC Protection Mechanisms + */ +//! @{ + + +Bool flashc_is_security_bit_active(void) +{ + return ((AVR32_FLASHC.fsr & AVR32_FLASHC_FSR_SECURITY_MASK) != 0); +} + + +void flashc_activate_security_bit(void) +{ + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_SSB, -1); +} + + +unsigned int flashc_get_bootloader_protected_size(void) +{ + unsigned int bootprot = (1 << AVR32_FLASHC_FGPFRLO_BOOTPROT_SIZE) - 1 - + flashc_read_gp_fuse_bitfield(AVR32_FLASHC_FGPFRLO_BOOTPROT_OFFSET, + AVR32_FLASHC_FGPFRLO_BOOTPROT_SIZE); + return (bootprot) ? AVR32_FLASHC_PAGE_SIZE << bootprot : 0; +} + + +unsigned int flashc_set_bootloader_protected_size(unsigned int bootprot_size) +{ + flashc_set_gp_fuse_bitfield(AVR32_FLASHC_FGPFRLO_BOOTPROT_OFFSET, + AVR32_FLASHC_FGPFRLO_BOOTPROT_SIZE, + (1 << AVR32_FLASHC_FGPFRLO_BOOTPROT_SIZE) - 1 - + ((bootprot_size) ? + 32 - clz((((min(max(bootprot_size, AVR32_FLASHC_PAGE_SIZE << 1), + AVR32_FLASHC_PAGE_SIZE << + ((1 << AVR32_FLASHC_FGPFRLO_BOOTPROT_SIZE) - 1)) + + AVR32_FLASHC_PAGE_SIZE - 1) / + AVR32_FLASHC_PAGE_SIZE) << 1) - 1) - 1 : + 0)); + return flashc_get_bootloader_protected_size(); +} + + +Bool flashc_is_external_privileged_fetch_locked(void) +{ + return (!flashc_read_gp_fuse_bit(AVR32_FLASHC_FGPFRLO_EPFL_OFFSET)); +} + + +void flashc_lock_external_privileged_fetch(Bool lock) +{ + flashc_set_gp_fuse_bit(AVR32_FLASHC_FGPFRLO_EPFL_OFFSET, !lock); +} + + +Bool flashc_is_page_region_locked(int page_number) +{ + return flashc_is_region_locked(flashc_get_page_region(page_number)); +} + + +Bool flashc_is_region_locked(unsigned int region) +{ + return ((AVR32_FLASHC.fsr & AVR32_FLASHC_FSR_LOCK0_MASK << (region & (AVR32_FLASHC_REGIONS - 1))) != 0); +} + + +void flashc_lock_page_region(int page_number, Bool lock) +{ + flashc_issue_command((lock) ? AVR32_FLASHC_FCMD_CMD_LP : AVR32_FLASHC_FCMD_CMD_UP, page_number); +} + + +void flashc_lock_region(unsigned int region, Bool lock) +{ + flashc_lock_page_region(flashc_get_region_first_page_number(region), lock); +} + + +void flashc_lock_all_regions(Bool lock) +{ + unsigned int error_status = 0; + unsigned int region = AVR32_FLASHC_REGIONS; + while (region) + { + flashc_lock_region(--region, lock); + error_status |= flashc_error_status; + } + flashc_error_status = error_status; +} + + +//! @} + + +/*! \name Access to General-Purpose Fuses + */ +//! @{ + + +Bool flashc_read_gp_fuse_bit(unsigned int gp_fuse_bit) +{ + return ((flashc_read_all_gp_fuses() & 1ULL << (gp_fuse_bit & 0x3F)) != 0); +} + + +U64 flashc_read_gp_fuse_bitfield(unsigned int pos, unsigned int width) +{ + return flashc_read_all_gp_fuses() >> (pos & 0x3F) & ((1ULL << min(width, 64)) - 1); +} + + +U8 flashc_read_gp_fuse_byte(unsigned int gp_fuse_byte) +{ + return flashc_read_all_gp_fuses() >> ((gp_fuse_byte & 0x07) << 3); +} + + +U64 flashc_read_all_gp_fuses(void) +{ + return AVR32_FLASHC.fgpfrlo | (U64)AVR32_FLASHC.fgpfrhi << 32; +} + + +Bool flashc_erase_gp_fuse_bit(unsigned int gp_fuse_bit, Bool check) +{ + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_EGPB, gp_fuse_bit & 0x3F); + return (check) ? flashc_read_gp_fuse_bit(gp_fuse_bit) : TRUE; +} + + +Bool flashc_erase_gp_fuse_bitfield(unsigned int pos, unsigned int width, Bool check) +{ + unsigned int error_status = 0; + unsigned int gp_fuse_bit; + pos &= 0x3F; + width = min(width, 64); + for (gp_fuse_bit = pos; gp_fuse_bit < pos + width; gp_fuse_bit++) + { + flashc_erase_gp_fuse_bit(gp_fuse_bit, FALSE); + error_status |= flashc_error_status; + } + flashc_error_status = error_status; + return (check) ? (flashc_read_gp_fuse_bitfield(pos, width) == (1ULL << width) - 1) : TRUE; +} + + +Bool flashc_erase_gp_fuse_byte(unsigned int gp_fuse_byte, Bool check) +{ + unsigned int error_status; + unsigned int current_gp_fuse_byte; + U64 value = flashc_read_all_gp_fuses(); + flashc_erase_all_gp_fuses(FALSE); + error_status = flashc_error_status; + for (current_gp_fuse_byte = 0; current_gp_fuse_byte < 8; current_gp_fuse_byte++, value >>= 8) + { + if (current_gp_fuse_byte != gp_fuse_byte) + { + flashc_write_gp_fuse_byte(current_gp_fuse_byte, value); + error_status |= flashc_error_status; + } + } + flashc_error_status = error_status; + return (check) ? (flashc_read_gp_fuse_byte(gp_fuse_byte) == 0xFF) : TRUE; +} + + +Bool flashc_erase_all_gp_fuses(Bool check) +{ + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_EAGPF, -1); + return (check) ? (flashc_read_all_gp_fuses() == 0xFFFFFFFFFFFFFFFFULL) : TRUE; +} + + +void flashc_write_gp_fuse_bit(unsigned int gp_fuse_bit, Bool value) +{ + if (!value) + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_WGPB, gp_fuse_bit & 0x3F); +} + + +void flashc_write_gp_fuse_bitfield(unsigned int pos, unsigned int width, U64 value) +{ + unsigned int error_status = 0; + unsigned int gp_fuse_bit; + pos &= 0x3F; + width = min(width, 64); + for (gp_fuse_bit = pos; gp_fuse_bit < pos + width; gp_fuse_bit++, value >>= 1) + { + flashc_write_gp_fuse_bit(gp_fuse_bit, value & 0x01); + error_status |= flashc_error_status; + } + flashc_error_status = error_status; +} + + +void flashc_write_gp_fuse_byte(unsigned int gp_fuse_byte, U8 value) +{ + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_PGPFB, (gp_fuse_byte & 0x07) | value << 3); +} + + +void flashc_write_all_gp_fuses(U64 value) +{ + unsigned int error_status = 0; + unsigned int gp_fuse_byte; + for (gp_fuse_byte = 0; gp_fuse_byte < 8; gp_fuse_byte++, value >>= 8) + { + flashc_write_gp_fuse_byte(gp_fuse_byte, value); + error_status |= flashc_error_status; + } + flashc_error_status = error_status; +} + + +void flashc_set_gp_fuse_bit(unsigned int gp_fuse_bit, Bool value) +{ + if (value) + flashc_erase_gp_fuse_bit(gp_fuse_bit, FALSE); + else + flashc_write_gp_fuse_bit(gp_fuse_bit, FALSE); +} + + +void flashc_set_gp_fuse_bitfield(unsigned int pos, unsigned int width, U64 value) +{ + unsigned int error_status = 0; + unsigned int gp_fuse_bit; + pos &= 0x3F; + width = min(width, 64); + for (gp_fuse_bit = pos; gp_fuse_bit < pos + width; gp_fuse_bit++, value >>= 1) + { + flashc_set_gp_fuse_bit(gp_fuse_bit, value & 0x01); + error_status |= flashc_error_status; + } + flashc_error_status = error_status; +} + + +void flashc_set_gp_fuse_byte(unsigned int gp_fuse_byte, U8 value) +{ + unsigned int error_status; + switch (value) + { + case 0xFF: + flashc_erase_gp_fuse_byte(gp_fuse_byte, FALSE); + break; + case 0x00: + flashc_write_gp_fuse_byte(gp_fuse_byte, 0x00); + break; + default: + flashc_erase_gp_fuse_byte(gp_fuse_byte, FALSE); + error_status = flashc_error_status; + flashc_write_gp_fuse_byte(gp_fuse_byte, value); + flashc_error_status |= error_status; + } +} + + +void flashc_set_all_gp_fuses(U64 value) +{ + unsigned int error_status; + switch (value) + { + case 0xFFFFFFFFFFFFFFFFULL: + flashc_erase_all_gp_fuses(FALSE); + break; + case 0x0000000000000000ULL: + flashc_write_all_gp_fuses(0x0000000000000000ULL); + break; + default: + flashc_erase_all_gp_fuses(FALSE); + error_status = flashc_error_status; + flashc_write_all_gp_fuses(value); + flashc_error_status |= error_status; + } +} + + +//! @} + + +/*! \name Access to Flash Pages + */ +//! @{ + + +void flashc_clear_page_buffer(void) +{ + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_CPB, -1); +} + + +Bool flashc_is_page_erased(void) +{ + return ((AVR32_FLASHC.fsr & AVR32_FLASHC_FSR_QPRR_MASK) != 0); +} + + +Bool flashc_quick_page_read(int page_number) +{ + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_QPR, page_number); + return flashc_is_page_erased(); +} + + +Bool flashc_erase_page(int page_number, Bool check) +{ + Bool page_erased = TRUE; + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_EP, page_number); + if (check) + { + unsigned int error_status = flashc_error_status; + page_erased = flashc_quick_page_read(-1); + flashc_error_status |= error_status; + } + return page_erased; +} + + +Bool flashc_erase_all_pages(Bool check) +{ + Bool all_pages_erased = TRUE; + unsigned int error_status = 0; + unsigned int page_number = flashc_get_page_count(); + while (page_number) + { + all_pages_erased &= flashc_erase_page(--page_number, check); + error_status |= flashc_error_status; + } + flashc_error_status = error_status; + return all_pages_erased; +} + + +void flashc_write_page(int page_number) +{ + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_WP, page_number); +} + + +Bool flashc_quick_user_page_read(void) +{ + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_QPRUP, -1); + return flashc_is_page_erased(); +} + + +Bool flashc_erase_user_page(Bool check) +{ + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_EUP, -1); + return (check) ? flashc_quick_user_page_read() : TRUE; +} + + +void flashc_write_user_page(void) +{ + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_WUP, -1); +} + + +volatile void *flashc_memset8(volatile void *dst, U8 src, size_t nbytes, Bool erase) +{ + return flashc_memset16(dst, src | (U16)src << 8, nbytes, erase); +} + + +volatile void *flashc_memset16(volatile void *dst, U16 src, size_t nbytes, Bool erase) +{ + return flashc_memset32(dst, src | (U32)src << 16, nbytes, erase); +} + + +volatile void *flashc_memset32(volatile void *dst, U32 src, size_t nbytes, Bool erase) +{ + return flashc_memset64(dst, src | (U64)src << 32, nbytes, erase); +} + + +volatile void *flashc_memset64(volatile void *dst, U64 src, size_t nbytes, Bool erase) +{ + // Use aggregated pointers to have several alignments available for a same address. + UnionCVPtr flash_array_end; + UnionVPtr dest; + Union64 source = {0}; + StructCVPtr dest_end; + UnionCVPtr flash_page_source_end; + Bool incomplete_flash_page_end; + Union64 flash_dword; + UnionVPtr tmp; + unsigned int error_status = 0; + unsigned int i; + + // Reformat arguments. + flash_array_end.u8ptr = AVR32_FLASH + flashc_get_flash_size(); + dest.u8ptr = dst; + for (i = (Get_align((U32)dest.u8ptr, sizeof(U64)) - 1) & (sizeof(U64) - 1); + src; i = (i - 1) & (sizeof(U64) - 1)) + { + source.u8[i] = src; + src >>= 8; + } + dest_end.u8ptr = dest.u8ptr + nbytes; + + // If destination is outside flash, go to next flash page if any. + if (dest.u8ptr < AVR32_FLASH) + { + dest.u8ptr = AVR32_FLASH; + } + else if (flash_array_end.u8ptr <= dest.u8ptr && dest.u8ptr < AVR32_FLASHC_USER_PAGE) + { + dest.u8ptr = AVR32_FLASHC_USER_PAGE; + } + + // If end of destination is outside flash, move it to the end of the previous flash page if any. + if (dest_end.u8ptr > AVR32_FLASHC_USER_PAGE + AVR32_FLASHC_USER_PAGE_SIZE) + { + dest_end.u8ptr = AVR32_FLASHC_USER_PAGE + AVR32_FLASHC_USER_PAGE_SIZE; + } + else if (AVR32_FLASHC_USER_PAGE >= dest_end.u8ptr && dest_end.u8ptr > flash_array_end.u8ptr) + { + dest_end.u8ptr = flash_array_end.u8ptr; + } + + // Align each end of destination pointer with its natural boundary. + dest_end.u16ptr = (U16 *)Align_down((U32)dest_end.u8ptr, sizeof(U16)); + dest_end.u32ptr = (U32 *)Align_down((U32)dest_end.u16ptr, sizeof(U32)); + dest_end.u64ptr = (U64 *)Align_down((U32)dest_end.u32ptr, sizeof(U64)); + + // While end of destination is not reached... + while (dest.u8ptr < dest_end.u8ptr) + { + // Clear the page buffer in order to prepare data for a flash page write. + flashc_clear_page_buffer(); + error_status |= flashc_error_status; + + // Determine where the source data will end in the current flash page. + flash_page_source_end.u64ptr = + (U64 *)min((U32)dest_end.u64ptr, + Align_down((U32)dest.u8ptr, AVR32_FLASHC_PAGE_SIZE) + AVR32_FLASHC_PAGE_SIZE); + + // Determine if the current destination page has an incomplete end. + incomplete_flash_page_end = (Align_down((U32)dest.u8ptr, AVR32_FLASHC_PAGE_SIZE) >= + Align_down((U32)dest_end.u8ptr, AVR32_FLASHC_PAGE_SIZE)); + + // Use a flash double-word buffer to manage unaligned accesses. + flash_dword.u64 = source.u64; + + // If destination does not point to the beginning of the current flash page... + if (!Test_align((U32)dest.u8ptr, AVR32_FLASHC_PAGE_SIZE)) + { + // Fill the beginning of the page buffer with the current flash page data. + // This is required by the hardware, even if page erase is not requested, + // in order to be able to write successfully to erased parts of flash + // pages that have already been written to. + for (tmp.u8ptr = (U8 *)Align_down((U32)dest.u8ptr, AVR32_FLASHC_PAGE_SIZE); + tmp.u64ptr < (U64 *)Align_down((U32)dest.u8ptr, sizeof(U64)); + tmp.u64ptr++) + *tmp.u64ptr = *tmp.u64ptr; + + // If destination is not 64-bit aligned... + if (!Test_align((U32)dest.u8ptr, sizeof(U64))) + { + // Fill the beginning of the flash double-word buffer with the current + // flash page data. + // This is required by the hardware, even if page erase is not + // requested, in order to be able to write successfully to erased parts + // of flash pages that have already been written to. + for (i = 0; i < Get_align((U32)dest.u8ptr, sizeof(U64)); i++) + flash_dword.u8[i] = *tmp.u8ptr++; + + // Align the destination pointer with its 64-bit boundary. + dest.u64ptr = (U64 *)Align_down((U32)dest.u8ptr, sizeof(U64)); + + // If the current destination double-word is not the last one... + if (dest.u64ptr < dest_end.u64ptr) + { + // Write the flash double-word buffer to the page buffer and reinitialize it. + *dest.u64ptr++ = flash_dword.u64; + flash_dword.u64 = source.u64; + } + } + } + + // Write the source data to the page buffer with 64-bit alignment. + for (i = flash_page_source_end.u64ptr - dest.u64ptr; i; i--) + *dest.u64ptr++ = source.u64; + + // If the current destination page has an incomplete end... + if (incomplete_flash_page_end) + { + // This is required by the hardware, even if page erase is not requested, + // in order to be able to write successfully to erased parts of flash + // pages that have already been written to. + { + tmp.u8ptr = (volatile U8 *)dest_end.u8ptr; + + // If end of destination is not 64-bit aligned... + if (!Test_align((U32)dest_end.u8ptr, sizeof(U64))) + { + // Fill the end of the flash double-word buffer with the current flash page data. + for (i = Get_align((U32)dest_end.u8ptr, sizeof(U64)); i < sizeof(U64); i++) + flash_dword.u8[i] = *tmp.u8ptr++; + + // Write the flash double-word buffer to the page buffer. + *dest.u64ptr++ = flash_dword.u64; + } + + // Fill the end of the page buffer with the current flash page data. + for (; !Test_align((U32)tmp.u64ptr, AVR32_FLASHC_PAGE_SIZE); tmp.u64ptr++) + *tmp.u64ptr = *tmp.u64ptr; + } + } + + // If the current flash page is in the flash array... + if (dest.u8ptr <= AVR32_FLASHC_USER_PAGE) + { + // Erase the current page if requested and write it from the page buffer. + if (erase) + { + flashc_erase_page(-1, FALSE); + error_status |= flashc_error_status; + } + flashc_write_page(-1); + error_status |= flashc_error_status; + + // If the end of the flash array is reached, go to the User page. + if (dest.u8ptr >= flash_array_end.u8ptr) + dest.u8ptr = AVR32_FLASHC_USER_PAGE; + } + // If the current flash page is the User page... + else + { + // Erase the User page if requested and write it from the page buffer. + if (erase) + { + flashc_erase_user_page(FALSE); + error_status |= flashc_error_status; + } + flashc_write_user_page(); + error_status |= flashc_error_status; + } + } + + // Update the FLASHC error status. + flashc_error_status = error_status; + + // Return the initial destination pointer as the standard memset function does. + return dst; +} + + +volatile void *flashc_memcpy(volatile void *dst, const void *src, size_t nbytes, Bool erase) +{ + // Use aggregated pointers to have several alignments available for a same address. + UnionCVPtr flash_array_end; + UnionVPtr dest; + UnionCPtr source; + StructCVPtr dest_end; + UnionCVPtr flash_page_source_end; + Bool incomplete_flash_page_end; + Union64 flash_dword; + Bool flash_dword_pending = FALSE; + UnionVPtr tmp; + unsigned int error_status = 0; + unsigned int i, j; + + // Reformat arguments. + flash_array_end.u8ptr = AVR32_FLASH + flashc_get_flash_size(); + dest.u8ptr = dst; + source.u8ptr = src; + dest_end.u8ptr = dest.u8ptr + nbytes; + + // If destination is outside flash, go to next flash page if any. + if (dest.u8ptr < AVR32_FLASH) + { + source.u8ptr += AVR32_FLASH - dest.u8ptr; + dest.u8ptr = AVR32_FLASH; + } + else if (flash_array_end.u8ptr <= dest.u8ptr && dest.u8ptr < AVR32_FLASHC_USER_PAGE) + { + source.u8ptr += AVR32_FLASHC_USER_PAGE - dest.u8ptr; + dest.u8ptr = AVR32_FLASHC_USER_PAGE; + } + + // If end of destination is outside flash, move it to the end of the previous flash page if any. + if (dest_end.u8ptr > AVR32_FLASHC_USER_PAGE + AVR32_FLASHC_USER_PAGE_SIZE) + { + dest_end.u8ptr = AVR32_FLASHC_USER_PAGE + AVR32_FLASHC_USER_PAGE_SIZE; + } + else if (AVR32_FLASHC_USER_PAGE >= dest_end.u8ptr && dest_end.u8ptr > flash_array_end.u8ptr) + { + dest_end.u8ptr = flash_array_end.u8ptr; + } + + // Align each end of destination pointer with its natural boundary. + dest_end.u16ptr = (U16 *)Align_down((U32)dest_end.u8ptr, sizeof(U16)); + dest_end.u32ptr = (U32 *)Align_down((U32)dest_end.u16ptr, sizeof(U32)); + dest_end.u64ptr = (U64 *)Align_down((U32)dest_end.u32ptr, sizeof(U64)); + + // While end of destination is not reached... + while (dest.u8ptr < dest_end.u8ptr) + { + // Clear the page buffer in order to prepare data for a flash page write. + flashc_clear_page_buffer(); + error_status |= flashc_error_status; + + // Determine where the source data will end in the current flash page. + flash_page_source_end.u64ptr = + (U64 *)min((U32)dest_end.u64ptr, + Align_down((U32)dest.u8ptr, AVR32_FLASHC_PAGE_SIZE) + AVR32_FLASHC_PAGE_SIZE); + + // Determine if the current destination page has an incomplete end. + incomplete_flash_page_end = (Align_down((U32)dest.u8ptr, AVR32_FLASHC_PAGE_SIZE) >= + Align_down((U32)dest_end.u8ptr, AVR32_FLASHC_PAGE_SIZE)); + + // If destination does not point to the beginning of the current flash page... + if (!Test_align((U32)dest.u8ptr, AVR32_FLASHC_PAGE_SIZE)) + { + // Fill the beginning of the page buffer with the current flash page data. + // This is required by the hardware, even if page erase is not requested, + // in order to be able to write successfully to erased parts of flash + // pages that have already been written to. + for (tmp.u8ptr = (U8 *)Align_down((U32)dest.u8ptr, AVR32_FLASHC_PAGE_SIZE); + tmp.u64ptr < (U64 *)Align_down((U32)dest.u8ptr, sizeof(U64)); + tmp.u64ptr++) + *tmp.u64ptr = *tmp.u64ptr; + + // If destination is not 64-bit aligned... + if (!Test_align((U32)dest.u8ptr, sizeof(U64))) + { + // Fill the beginning of the flash double-word buffer with the current + // flash page data. + // This is required by the hardware, even if page erase is not + // requested, in order to be able to write successfully to erased parts + // of flash pages that have already been written to. + for (i = 0; i < Get_align((U32)dest.u8ptr, sizeof(U64)); i++) + flash_dword.u8[i] = *tmp.u8ptr++; + + // Fill the end of the flash double-word buffer with the source data. + for (; i < sizeof(U64); i++) + flash_dword.u8[i] = *source.u8ptr++; + + // Align the destination pointer with its 64-bit boundary. + dest.u64ptr = (U64 *)Align_down((U32)dest.u8ptr, sizeof(U64)); + + // If the current destination double-word is not the last one... + if (dest.u64ptr < dest_end.u64ptr) + { + // Write the flash double-word buffer to the page buffer. + *dest.u64ptr++ = flash_dword.u64; + } + // If the current destination double-word is the last one, the flash + // double-word buffer must be kept for later. + else flash_dword_pending = TRUE; + } + } + + // Read the source data with the maximal possible alignment and write it to + // the page buffer with 64-bit alignment. + switch (Get_align((U32)source.u8ptr, sizeof(U32))) + { + case 0: + for (i = flash_page_source_end.u64ptr - dest.u64ptr; i; i--) + *dest.u64ptr++ = *source.u64ptr++; + break; + + case sizeof(U16): + for (i = flash_page_source_end.u64ptr - dest.u64ptr; i; i--) + { + for (j = 0; j < sizeof(U64) / sizeof(U16); j++) flash_dword.u16[j] = *source.u16ptr++; + *dest.u64ptr++ = flash_dword.u64; + } + break; + + default: + for (i = flash_page_source_end.u64ptr - dest.u64ptr; i; i--) + { + for (j = 0; j < sizeof(U64); j++) flash_dword.u8[j] = *source.u8ptr++; + *dest.u64ptr++ = flash_dword.u64; + } + } + + // If the current destination page has an incomplete end... + if (incomplete_flash_page_end) + { + // If the flash double-word buffer is in use, do not initialize it. + if (flash_dword_pending) i = Get_align((U32)dest_end.u8ptr, sizeof(U64)); + // If the flash double-word buffer is free... + else + { + // Fill the beginning of the flash double-word buffer with the source data. + for (i = 0; i < Get_align((U32)dest_end.u8ptr, sizeof(U64)); i++) + flash_dword.u8[i] = *source.u8ptr++; + } + + // This is required by the hardware, even if page erase is not requested, + // in order to be able to write successfully to erased parts of flash + // pages that have already been written to. + { + tmp.u8ptr = (volatile U8 *)dest_end.u8ptr; + + // If end of destination is not 64-bit aligned... + if (!Test_align((U32)dest_end.u8ptr, sizeof(U64))) + { + // Fill the end of the flash double-word buffer with the current flash page data. + for (; i < sizeof(U64); i++) + flash_dword.u8[i] = *tmp.u8ptr++; + + // Write the flash double-word buffer to the page buffer. + *dest.u64ptr++ = flash_dword.u64; + } + + // Fill the end of the page buffer with the current flash page data. + for (; !Test_align((U32)tmp.u64ptr, AVR32_FLASHC_PAGE_SIZE); tmp.u64ptr++) + *tmp.u64ptr = *tmp.u64ptr; + } + } + + // If the current flash page is in the flash array... + if (dest.u8ptr <= AVR32_FLASHC_USER_PAGE) + { + // Erase the current page if requested and write it from the page buffer. + if (erase) + { + flashc_erase_page(-1, FALSE); + error_status |= flashc_error_status; + } + flashc_write_page(-1); + error_status |= flashc_error_status; + + // If the end of the flash array is reached, go to the User page. + if (dest.u8ptr >= flash_array_end.u8ptr) + { + source.u8ptr += AVR32_FLASHC_USER_PAGE - dest.u8ptr; + dest.u8ptr = AVR32_FLASHC_USER_PAGE; + } + } + // If the current flash page is the User page... + else + { + // Erase the User page if requested and write it from the page buffer. + if (erase) + { + flashc_erase_user_page(FALSE); + error_status |= flashc_error_status; + } + flashc_write_user_page(); + error_status |= flashc_error_status; + } + } + + // Update the FLASHC error status. + flashc_error_status = error_status; + + // Return the initial destination pointer as the standard memcpy function does. + return dst; +} + + +#if UC3C +void flashc_set_flash_waitstate_and_readmode(unsigned long cpu_f_hz) +{ + //! Device-specific data + #undef AVR32_FLASHC_FWS_0_MAX_FREQ + #undef AVR32_FLASHC_FWS_1_MAX_FREQ + #undef AVR32_FLASHC_HSEN_FWS_0_MAX_FREQ + #undef AVR32_FLASHC_HSEN_FWS_1_MAX_FREQ + #define AVR32_FLASHC_FWS_0_MAX_FREQ 33000000 + #define AVR32_FLASHC_FWS_1_MAX_FREQ 66000000 + #define AVR32_FLASHC_HSEN_FWS_0_MAX_FREQ 33000000 + #define AVR32_FLASHC_HSEN_FWS_1_MAX_FREQ 72000000 + // These defines are missing from or wrong in the toolchain header files uc3cxxx.h + // Put a Bugzilla + + if(cpu_f_hz > AVR32_FLASHC_HSEN_FWS_0_MAX_FREQ) // > 33MHz + { + // Set a wait-state + flashc_set_wait_state(1); + if(cpu_f_hz <= AVR32_FLASHC_FWS_1_MAX_FREQ) // <= 66MHz and >33Mhz + { + // Disable the high-speed read mode. + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_HSDIS, -1); + } + else // > 66Mhz + { + // Enable the high-speed read mode. + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_HSEN, -1); + } + } + else // <= 33 MHz + { + // Disable wait-state + flashc_set_wait_state(0); + + // Disable the high-speed read mode. + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_HSDIS, -1); + + } +} +#endif // UC3C device-specific implementation + +//! @} diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.h new file mode 100644 index 0000000000..8d9a00b0a4 --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.h @@ -0,0 +1,1002 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief FLASHC driver for AVR32 UC3. + * + * AVR32 Flash Controller driver module. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices with a FLASHC module can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef _FLASHC_H_ +#define _FLASHC_H_ + +#include +#include +#include "compiler.h" + +//! Number of flash regions defined by the FLASHC. +#define AVR32_FLASHC_REGIONS (AVR32_FLASHC_FLASH_SIZE /\ + (AVR32_FLASHC_PAGES_PR_REGION * AVR32_FLASHC_PAGE_SIZE)) + + +/*! \name Flash Properties + */ +//! @{ + +/*! \brief Gets the size of the whole flash array. + * + * \return The size of the whole flash array in bytes. + */ +extern unsigned int flashc_get_flash_size(void); + +/*! \brief Gets the total number of pages in the flash array. + * + * \return The total number of pages in the flash array. + */ +extern unsigned int flashc_get_page_count(void); + +/*! \brief Gets the number of pages in each flash region. + * + * \return The number of pages in each flash region. + */ +extern unsigned int flashc_get_page_count_per_region(void); + +/*! \brief Gets the region number of a page. + * + * \param page_number The page number: + * \arg \c 0 to (flashc_get_page_count() - 1): a page number within + * the flash array; + * \arg < 0: the current page number. + * + * \return The region number of the specified page. + */ +extern unsigned int flashc_get_page_region(int page_number); + +/*! \brief Gets the number of the first page of a region. + * + * \param region The region number: \c 0 to (AVR32_FLASHC_REGIONS - 1). + * + * \return The number of the first page of the specified region. + */ +extern unsigned int flashc_get_region_first_page_number(unsigned int region); + +//! @} + + +/*! \name FLASHC Control + */ +//! @{ + +/*! \brief Gets the number of wait states of flash read accesses. + * + * \return The number of wait states of flash read accesses. + */ +extern unsigned int flashc_get_wait_state(void); + +/*! \brief Sets the number of wait states of flash read accesses. + * + * \param wait_state The number of wait states of flash read accesses: \c 0 to + * \c 1. + */ +extern void flashc_set_wait_state(unsigned int wait_state); + +/*! \brief Tells whether the Flash Ready interrupt is enabled. + * + * \return Whether the Flash Ready interrupt is enabled. + */ +extern Bool flashc_is_ready_int_enabled(void); + +/*! \brief Enables or disables the Flash Ready interrupt. + * + * \param enable Whether to enable the Flash Ready interrupt: \c TRUE or + * \c FALSE. + */ +extern void flashc_enable_ready_int(Bool enable); + +/*! \brief Tells whether the Lock Error interrupt is enabled. + * + * \return Whether the Lock Error interrupt is enabled. + */ +extern Bool flashc_is_lock_error_int_enabled(void); + +/*! \brief Enables or disables the Lock Error interrupt. + * + * \param enable Whether to enable the Lock Error interrupt: \c TRUE or + * \c FALSE. + */ +extern void flashc_enable_lock_error_int(Bool enable); + +/*! \brief Tells whether the Programming Error interrupt is enabled. + * + * \return Whether the Programming Error interrupt is enabled. + */ +extern Bool flashc_is_prog_error_int_enabled(void); + +/*! \brief Enables or disables the Programming Error interrupt. + * + * \param enable Whether to enable the Programming Error interrupt: \c TRUE or + * \c FALSE. + */ +extern void flashc_enable_prog_error_int(Bool enable); + +//! @} + + +/*! \name FLASHC Status + */ +//! @{ + +/*! \brief Tells whether the FLASHC is ready to run a new command. + * + * \return Whether the FLASHC is ready to run a new command. + */ +extern Bool flashc_is_ready(void); + +/*! \brief Waits actively until the FLASHC is ready to run a new command. + * + * This is the default function assigned to \ref flashc_wait_until_ready. + */ +extern void flashc_default_wait_until_ready(void); + +//! Pointer to the function used by the driver when it needs to wait until the +//! FLASHC is ready to run a new command. +//! The default function is \ref flashc_default_wait_until_ready. +//! The user may change this pointer to use another implementation. +extern void (*volatile flashc_wait_until_ready)(void); + +/*! \brief Tells whether a Lock Error has occurred during the last function + * called that issued one or more FLASHC commands. + * + * \return Whether a Lock Error has occurred during the last function called + * that issued one or more FLASHC commands. + */ +extern Bool flashc_is_lock_error(void); + +/*! \brief Tells whether a Programming Error has occurred during the last + * function called that issued one or more FLASHC commands. + * + * \return Whether a Programming Error has occurred during the last function + * called that issued one or more FLASHC commands. + */ +extern Bool flashc_is_programming_error(void); + +//! @} + + +/*! \name FLASHC Command Control + */ +//! @{ + +/*! \brief Gets the last issued FLASHC command. + * + * \return The last issued FLASHC command. + */ +extern unsigned int flashc_get_command(void); + +/*! \brief Gets the current FLASHC page number. + * + * \return The current FLASHC page number. + */ +extern unsigned int flashc_get_page_number(void); + +/*! \brief Issues a FLASHC command. + * + * \param command The command: \c AVR32_FLASHC_FCMD_CMD_x. + * \param page_number The page number to apply the command to: + * \arg \c 0 to (flashc_get_page_count() - 1): a page number within + * the flash array; + * \arg < 0: use this to apply the command to the current page number + * or if the command does not apply to any page number; + * \arg this argument may have other meanings according to the command. See + * the FLASHC chapter of the MCU datasheet. + * + * \warning A Lock Error is issued if the command violates the protection + * mechanism. + * + * \warning A Programming Error is issued if the command is invalid. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern void flashc_issue_command(unsigned int command, int page_number); + +//! @} + + +/*! \name FLASHC Global Commands + */ +//! @{ + +/*! \brief Issues a No Operation command to the FLASHC. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern void flashc_no_operation(void); + +/*! \brief Issues an Erase All command to the FLASHC. + * + * This command erases all bits in the flash array, the general-purpose fuse + * bits and the Security bit. The User page is not erased. + * + * This command also ensures that all volatile memories, such as register file + * and RAMs, are erased before the Security bit is erased, i.e. deactivated. + * + * \warning A Lock Error is issued if at least one region is locked or the + * bootloader protection is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note An erase operation can only set bits. + */ +extern void flashc_erase_all(void); + +//! @} + + +/*! \name FLASHC Protection Mechanisms + */ +//! @{ + +/*! \brief Tells whether the Security bit is active. + * + * \return Whether the Security bit is active. + */ +extern Bool flashc_is_security_bit_active(void); + +/*! \brief Activates the Security bit. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern void flashc_activate_security_bit(void); + +/*! \brief Gets the bootloader protected size. + * + * \return The bootloader protected size in bytes. + */ +extern unsigned int flashc_get_bootloader_protected_size(void); + +/*! \brief Sets the bootloader protected size. + * + * \param bootprot_size The wanted bootloader protected size in bytes. If this + * size is not supported, the actual size will be the + * nearest greater available size or the maximal possible + * size if the requested size is too large. + * + * \return The actual bootloader protected size in bytes. + * + * \warning A Lock Error is issued if the Security bit is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern unsigned int flashc_set_bootloader_protected_size(unsigned int bootprot_size); + +/*! \brief Tells whether external privileged fetch is locked. + * + * \return Whether external privileged fetch is locked. + */ +extern Bool flashc_is_external_privileged_fetch_locked(void); + +/*! \brief Locks or unlocks external privileged fetch. + * + * \param lock Whether to lock external privileged fetch: \c TRUE or \c FALSE. + * + * \warning A Lock Error is issued if the Security bit is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern void flashc_lock_external_privileged_fetch(Bool lock); + +/*! \brief Tells whether the region of a page is locked. + * + * \param page_number The page number: + * \arg \c 0 to (flashc_get_page_count() - 1): a page number within + * the flash array; + * \arg < 0: the current page number. + * + * \return Whether the region of the specified page is locked. + */ +extern Bool flashc_is_page_region_locked(int page_number); + +/*! \brief Tells whether a region is locked. + * + * \param region The region number: \c 0 to (AVR32_FLASHC_REGIONS - 1). + * + * \return Whether the specified region is locked. + */ +extern Bool flashc_is_region_locked(unsigned int region); + +/*! \brief Locks or unlocks the region of a page. + * + * \param page_number The page number: + * \arg \c 0 to (flashc_get_page_count() - 1): a page number within + * the flash array; + * \arg < 0: the current page number. + * \param lock Whether to lock the region of the specified page: \c TRUE or + * \c FALSE. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern void flashc_lock_page_region(int page_number, Bool lock); + +/*! \brief Locks or unlocks a region. + * + * \param region The region number: \c 0 to (AVR32_FLASHC_REGIONS - 1). + * \param lock Whether to lock the specified region: \c TRUE or \c FALSE. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern void flashc_lock_region(unsigned int region, Bool lock); + +/*! \brief Locks or unlocks all regions. + * + * \param lock Whether to lock the regions: \c TRUE or \c FALSE. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern void flashc_lock_all_regions(Bool lock); + +//! @} + + +/*! \name Access to General-Purpose Fuses + */ +//! @{ + +/*! \brief Reads a general-purpose fuse bit. + * + * \param gp_fuse_bit The general-purpose fuse bit: \c 0 to \c 63. + * + * \return The value of the specified general-purpose fuse bit. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern Bool flashc_read_gp_fuse_bit(unsigned int gp_fuse_bit); + +/*! \brief Reads a general-purpose fuse bit-field. + * + * \param pos The bit-position of the general-purpose fuse bit-field: \c 0 to + * \c 63. + * \param width The bit-width of the general-purpose fuse bit-field: \c 0 to + * \c 64. + * + * \return The value of the specified general-purpose fuse bit-field. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern U64 flashc_read_gp_fuse_bitfield(unsigned int pos, unsigned int width); + +/*! \brief Reads a general-purpose fuse byte. + * + * \param gp_fuse_byte The general-purpose fuse byte: \c 0 to \c 7. + * + * \return The value of the specified general-purpose fuse byte. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern U8 flashc_read_gp_fuse_byte(unsigned int gp_fuse_byte); + +/*! \brief Reads all general-purpose fuses. + * + * \return The value of all general-purpose fuses as a word. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern U64 flashc_read_all_gp_fuses(void); + +/*! \brief Erases a general-purpose fuse bit. + * + * \param gp_fuse_bit The general-purpose fuse bit: \c 0 to \c 63. + * \param check Whether to check erase: \c TRUE or \c FALSE. + * + * \return Whether the erase succeeded or always \c TRUE if erase check was not + * requested. + * + * \warning A Lock Error is issued if the Security bit is active and the command + * is applied to BOOTPROT or EPFL fuses. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note An erase operation can only set bits. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern Bool flashc_erase_gp_fuse_bit(unsigned int gp_fuse_bit, Bool check); + +/*! \brief Erases a general-purpose fuse bit-field. + * + * \param pos The bit-position of the general-purpose fuse bit-field: \c 0 to + * \c 63. + * \param width The bit-width of the general-purpose fuse bit-field: \c 0 to + * \c 64. + * \param check Whether to check erase: \c TRUE or \c FALSE. + * + * \return Whether the erase succeeded or always \c TRUE if erase check was not + * requested. + * + * \warning A Lock Error is issued if the Security bit is active and the command + * is applied to BOOTPROT or EPFL fuses. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note An erase operation can only set bits. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern Bool flashc_erase_gp_fuse_bitfield(unsigned int pos, unsigned int width, Bool check); + +/*! \brief Erases a general-purpose fuse byte. + * + * \param gp_fuse_byte The general-purpose fuse byte: \c 0 to \c 7. + * \param check Whether to check erase: \c TRUE or \c FALSE. + * + * \return Whether the erase succeeded or always \c TRUE if erase check was not + * requested. + * + * \warning A Lock Error is issued if the Security bit is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note An erase operation can only set bits. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern Bool flashc_erase_gp_fuse_byte(unsigned int gp_fuse_byte, Bool check); + +/*! \brief Erases all general-purpose fuses. + * + * \param check Whether to check erase: \c TRUE or \c FALSE. + * + * \return Whether the erase succeeded or always \c TRUE if erase check was not + * requested. + * + * \warning A Lock Error is issued if the Security bit is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note An erase operation can only set bits. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern Bool flashc_erase_all_gp_fuses(Bool check); + +/*! \brief Writes a general-purpose fuse bit. + * + * \param gp_fuse_bit The general-purpose fuse bit: \c 0 to \c 63. + * \param value The value of the specified general-purpose fuse bit. + * + * \warning A Lock Error is issued if the Security bit is active and the command + * is applied to BOOTPROT or EPFL fuses. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note A write operation can only clear bits. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern void flashc_write_gp_fuse_bit(unsigned int gp_fuse_bit, Bool value); + +/*! \brief Writes a general-purpose fuse bit-field. + * + * \param pos The bit-position of the general-purpose fuse bit-field: \c 0 to + * \c 63. + * \param width The bit-width of the general-purpose fuse bit-field: \c 0 to + * \c 64. + * \param value The value of the specified general-purpose fuse bit-field. + * + * \warning A Lock Error is issued if the Security bit is active and the command + * is applied to BOOTPROT or EPFL fuses. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note A write operation can only clear bits. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern void flashc_write_gp_fuse_bitfield(unsigned int pos, unsigned int width, U64 value); + +/*! \brief Writes a general-purpose fuse byte. + * + * \param gp_fuse_byte The general-purpose fuse byte: \c 0 to \c 7. + * \param value The value of the specified general-purpose fuse byte. + * + * \warning A Lock Error is issued if the Security bit is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note A write operation can only clear bits. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern void flashc_write_gp_fuse_byte(unsigned int gp_fuse_byte, U8 value); + +/*! \brief Writes all general-purpose fuses. + * + * \param value The value of all general-purpose fuses as a word. + * + * \warning A Lock Error is issued if the Security bit is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note A write operation can only clear bits. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern void flashc_write_all_gp_fuses(U64 value); + +/*! \brief Sets a general-purpose fuse bit with the appropriate erase and write + * operations. + * + * \param gp_fuse_bit The general-purpose fuse bit: \c 0 to \c 63. + * \param value The value of the specified general-purpose fuse bit. + * + * \warning A Lock Error is issued if the Security bit is active and the command + * is applied to BOOTPROT or EPFL fuses. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern void flashc_set_gp_fuse_bit(unsigned int gp_fuse_bit, Bool value); + +/*! \brief Sets a general-purpose fuse bit-field with the appropriate erase and + * write operations. + * + * \param pos The bit-position of the general-purpose fuse bit-field: \c 0 to + * \c 63. + * \param width The bit-width of the general-purpose fuse bit-field: \c 0 to + * \c 64. + * \param value The value of the specified general-purpose fuse bit-field. + * + * \warning A Lock Error is issued if the Security bit is active and the command + * is applied to BOOTPROT or EPFL fuses. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern void flashc_set_gp_fuse_bitfield(unsigned int pos, unsigned int width, U64 value); + +/*! \brief Sets a general-purpose fuse byte with the appropriate erase and write + * operations. + * + * \param gp_fuse_byte The general-purpose fuse byte: \c 0 to \c 7. + * \param value The value of the specified general-purpose fuse byte. + * + * \warning A Lock Error is issued if the Security bit is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern void flashc_set_gp_fuse_byte(unsigned int gp_fuse_byte, U8 value); + +/*! \brief Sets all general-purpose fuses with the appropriate erase and write + * operations. + * + * \param value The value of all general-purpose fuses as a word. + * + * \warning A Lock Error is issued if the Security bit is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern void flashc_set_all_gp_fuses(U64 value); + +//! @} + + +/*! \name Access to Flash Pages + */ +//! @{ + +/*! \brief Clears the page buffer. + * + * This command resets all bits in the page buffer to one. Write accesses to the + * page buffer can only change page buffer bits from one to zero. + * + * \warning The page buffer is not automatically reset after a page write. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern void flashc_clear_page_buffer(void); + +/*! \brief Tells whether the page to which the last Quick Page Read or Quick + * Page Read User Page command was applied was erased. + * + * \return Whether the page to which the last Quick Page Read or Quick Page Read + * User Page command was applied was erased. + */ +extern Bool flashc_is_page_erased(void); + +/*! \brief Applies the Quick Page Read command to a page. + * + * \param page_number The page number: + * \arg \c 0 to (flashc_get_page_count() - 1): a page number within + * the flash array; + * \arg < 0: the current page number. + * + * \return Whether the specified page is erased. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern Bool flashc_quick_page_read(int page_number); + +/*! \brief Erases a page. + * + * \param page_number The page number: + * \arg \c 0 to (flashc_get_page_count() - 1): a page number within + * the flash array; + * \arg < 0: the current page number. + * \param check Whether to check erase: \c TRUE or \c FALSE. + * + * \return Whether the erase succeeded or always \c TRUE if erase check was not + * requested. + * + * \warning A Lock Error is issued if the command is applied to a page belonging + * to a locked region or to the bootloader protected area. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note An erase operation can only set bits. + */ +extern Bool flashc_erase_page(int page_number, Bool check); + +/*! \brief Erases all pages within the flash array. + * + * \param check Whether to check erase: \c TRUE or \c FALSE. + * + * \return Whether the erase succeeded or always \c TRUE if erase check was not + * requested. + * + * \warning A Lock Error is issued if at least one region is locked or the + * bootloader protection is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note An erase operation can only set bits. + */ +extern Bool flashc_erase_all_pages(Bool check); + +/*! \brief Writes a page from the page buffer. + * + * \param page_number The page number: + * \arg \c 0 to (flashc_get_page_count() - 1): a page number within + * the flash array; + * \arg < 0: the current page number. + * + * \warning A Lock Error is issued if the command is applied to a page belonging + * to a locked region or to the bootloader protected area. + * + * \warning The page buffer is not automatically reset after a page write. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note A write operation can only clear bits. + */ +extern void flashc_write_page(int page_number); + +/*! \brief Issues a Quick Page Read User Page command to the FLASHC. + * + * \return Whether the User page is erased. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern Bool flashc_quick_user_page_read(void); + +/*! \brief Erases the User page. + * + * \param check Whether to check erase: \c TRUE or \c FALSE. + * + * \return Whether the erase succeeded or always \c TRUE if erase check was not + * requested. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note An erase operation can only set bits. + */ +extern Bool flashc_erase_user_page(Bool check); + +/*! \brief Writes the User page from the page buffer. + * + * \warning The page buffer is not automatically reset after a page write. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note A write operation can only clear bits. + */ +extern void flashc_write_user_page(void); + +/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst + * from the repeated \a src source byte. + * + * The destination areas that are not within the flash array or the User page + * are ignored. + * + * All pointer and size alignments are supported. + * + * \param dst Pointer to flash destination. + * \param src Source byte. + * \param nbytes Number of bytes to set. + * \param erase Whether to erase before writing: \c TRUE or \c FALSE. + * + * \return The value of \a dst. + * + * \warning This function may be called with \a erase set to \c FALSE only if + * the destination consists only of erased words, i.e. this function + * can not be used to write only one bit of a previously written word. + * E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the + * resulting value in flash may be different from \c 0x00000000. + * + * \warning A Lock Error is issued if the command is applied to pages belonging + * to a locked region or to the bootloader protected area. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern volatile void *flashc_memset8(volatile void *dst, U8 src, size_t nbytes, Bool erase); + +/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst + * from the repeated \a src big-endian source half-word. + * + * The destination areas that are not within the flash array or the User page + * are ignored. + * + * All pointer and size alignments are supported. + * + * \param dst Pointer to flash destination. + * \param src Source half-word. + * \param nbytes Number of bytes to set. + * \param erase Whether to erase before writing: \c TRUE or \c FALSE. + * + * \return The value of \a dst. + * + * \warning This function may be called with \a erase set to \c FALSE only if + * the destination consists only of erased words, i.e. this function + * can not be used to write only one bit of a previously written word. + * E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the + * resulting value in flash may be different from \c 0x00000000. + * + * \warning A Lock Error is issued if the command is applied to pages belonging + * to a locked region or to the bootloader protected area. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern volatile void *flashc_memset16(volatile void *dst, U16 src, size_t nbytes, Bool erase); + +/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst + * from the repeated \a src big-endian source word. + * + * The destination areas that are not within the flash array or the User page + * are ignored. + * + * All pointer and size alignments are supported. + * + * \param dst Pointer to flash destination. + * \param src Source word. + * \param nbytes Number of bytes to set. + * \param erase Whether to erase before writing: \c TRUE or \c FALSE. + * + * \return The value of \a dst. + * + * \warning This function may be called with \a erase set to \c FALSE only if + * the destination consists only of erased words, i.e. this function + * can not be used to write only one bit of a previously written word. + * E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the + * resulting value in flash may be different from \c 0x00000000. + * + * \warning A Lock Error is issued if the command is applied to pages belonging + * to a locked region or to the bootloader protected area. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern volatile void *flashc_memset32(volatile void *dst, U32 src, size_t nbytes, Bool erase); + +/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst + * from the repeated \a src big-endian source double-word. + * + * The destination areas that are not within the flash array or the User page + * are ignored. + * + * All pointer and size alignments are supported. + * + * \param dst Pointer to flash destination. + * \param src Source double-word. + * \param nbytes Number of bytes to set. + * \param erase Whether to erase before writing: \c TRUE or \c FALSE. + * + * \return The value of \a dst. + * + * \warning This function may be called with \a erase set to \c FALSE only if + * the destination consists only of erased words, i.e. this function + * can not be used to write only one bit of a previously written word. + * E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the + * resulting value in flash may be different from \c 0x00000000. + * + * \warning A Lock Error is issued if the command is applied to pages belonging + * to a locked region or to the bootloader protected area. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern volatile void *flashc_memset64(volatile void *dst, U64 src, size_t nbytes, Bool erase); + +/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst + * from the repeated \a src big-endian source pattern. + * + * The destination areas that are not within the flash array or the User page + * are ignored. + * + * All pointer and size alignments are supported. + * + * \param dst Pointer to flash destination. + * \param src Source double-word. + * \param src_width \a src width in bits: 8, 16, 32 or 64. + * \param nbytes Number of bytes to set. + * \param erase Whether to erase before writing: \c TRUE or \c FALSE. + * + * \return The value of \a dst. + * + * \warning This function may be called with \a erase set to \c FALSE only if + * the destination consists only of erased words, i.e. this function + * can not be used to write only one bit of a previously written word. + * E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the + * resulting value in flash may be different from \c 0x00000000. + * + * \warning A Lock Error is issued if the command is applied to pages belonging + * to a locked region or to the bootloader protected area. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +#define flashc_memset(dst, src, src_width, nbytes, erase) \ + TPASTE2(flashc_memset, src_width)((dst), (src), (nbytes), (erase)) + +/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst + * from the source pointed to by \a src. + * + * The destination areas that are not within the flash array or the User page + * are ignored. + * + * All pointer and size alignments are supported. + * + * \param dst Pointer to flash destination. + * \param src Pointer to source data. + * \param nbytes Number of bytes to copy. + * \param erase Whether to erase before writing: \c TRUE or \c FALSE. + * + * \return The value of \a dst. + * + * \warning If copying takes place between areas that overlap, the behavior is + * undefined. + * + * \warning This function may be called with \a erase set to \c FALSE only if + * the destination consists only of erased words, i.e. this function + * can not be used to write only one bit of a previously written word. + * E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the + * resulting value in flash may be different from \c 0x00000000. + * + * \warning A Lock Error is issued if the command is applied to pages belonging + * to a locked region or to the bootloader protected area. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern volatile void *flashc_memcpy(volatile void *dst, const void *src, size_t nbytes, Bool erase); + +#if UC3C + +/*! \brief Depednding to the CPU frequency, set the wait states of flash read + * accesses and enable or disable the High speed read mode. + * + * \param cpu_f_hz The CPU frequency + */ +void flashc_set_flash_waitstate_and_readmode(unsigned long cpu_f_hz); +#endif // UC3C device-specific implementation + +//! @} + + +#endif // _FLASHC_H_ diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/GPIO/gpio.c b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/GPIO/gpio.c new file mode 100644 index 0000000000..42f4c49d5a --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/GPIO/gpio.c @@ -0,0 +1,458 @@ +/* This source file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file has been prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief GPIO driver for AVR32 UC3. + * + * This file defines a useful set of functions for the GPIO. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices with a GPIO module can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + *****************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#include "gpio.h" + +//! GPIO module instance. +#define GPIO AVR32_GPIO + + +/*! \name Peripheral Bus Interface + */ +//! @{ + + +int gpio_enable_module(const gpio_map_t gpiomap, unsigned int size) +{ + int status = GPIO_SUCCESS; + unsigned int i; + + for (i = 0; i < size; i++) + { + status |= gpio_enable_module_pin(gpiomap->pin, gpiomap->function); + gpiomap++; + } + + return status; +} + + +int gpio_enable_module_pin(unsigned int pin, unsigned int function) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + + // Enable the correct function. + switch (function) + { + case 0: // A function. + gpio_port->pmr0c = 1 << (pin & 0x1F); + gpio_port->pmr1c = 1 << (pin & 0x1F); +#if defined(AVR32_GPIO_210_H_INCLUDED) || defined(AVR32_GPIO_211_H_INCLUDED) + gpio_port->pmr2c = 1 << (pin & 0x1F); +#endif + break; + + case 1: // B function. + gpio_port->pmr0s = 1 << (pin & 0x1F); + gpio_port->pmr1c = 1 << (pin & 0x1F); +#if defined(AVR32_GPIO_210_H_INCLUDED) || defined(AVR32_GPIO_211_H_INCLUDED) + gpio_port->pmr2c = 1 << (pin & 0x1F); +#endif + break; + + case 2: // C function. + gpio_port->pmr0c = 1 << (pin & 0x1F); + gpio_port->pmr1s = 1 << (pin & 0x1F); +#if defined(AVR32_GPIO_210_H_INCLUDED) || defined(AVR32_GPIO_211_H_INCLUDED) + gpio_port->pmr2c = 1 << (pin & 0x1F); +#endif + break; + + case 3: // D function. + gpio_port->pmr0s = 1 << (pin & 0x1F); + gpio_port->pmr1s = 1 << (pin & 0x1F); +#if defined(AVR32_GPIO_210_H_INCLUDED) || defined(AVR32_GPIO_211_H_INCLUDED) + gpio_port->pmr2c = 1 << (pin & 0x1F); +#endif + break; + +#if defined(AVR32_GPIO_210_H_INCLUDED) || defined(AVR32_GPIO_211_H_INCLUDED) + case 4: // E function. + gpio_port->pmr0c = 1 << (pin & 0x1F); + gpio_port->pmr1c = 1 << (pin & 0x1F); + gpio_port->pmr2s = 1 << (pin & 0x1F); + break; + + case 5: // F function. + gpio_port->pmr0s = 1 << (pin & 0x1F); + gpio_port->pmr1c = 1 << (pin & 0x1F); + gpio_port->pmr2s = 1 << (pin & 0x1F); + break; + + case 6: // G function. + gpio_port->pmr0c = 1 << (pin & 0x1F); + gpio_port->pmr1s = 1 << (pin & 0x1F); + gpio_port->pmr2s = 1 << (pin & 0x1F); + break; + + case 7: // H function. + gpio_port->pmr0s = 1 << (pin & 0x1F); + gpio_port->pmr1s = 1 << (pin & 0x1F); + gpio_port->pmr2s = 1 << (pin & 0x1F); + break; +#endif + + default: + return GPIO_INVALID_ARGUMENT; + } + + // Disable GPIO control. + gpio_port->gperc = 1 << (pin & 0x1F); + + return GPIO_SUCCESS; +} + + +void gpio_enable_gpio(const gpio_map_t gpiomap, unsigned int size) +{ + unsigned int i; + + for (i = 0; i < size; i++) + { + gpio_enable_gpio_pin(gpiomap->pin); + gpiomap++; + } +} + + +void gpio_enable_gpio_pin(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + gpio_port->oderc = 1 << (pin & 0x1F); + gpio_port->gpers = 1 << (pin & 0x1F); +} + + +// The open-drain mode is not synthesized on the current AVR32 products. +// If one day some AVR32 products have this feature, the corresponding part +// numbers should be listed in the #if below. +// Note that other functions are available in this driver to use pins with open +// drain in GPIO mode. The advantage of the open-drain mode functions over these +// other functions is that they can be used not only in GPIO mode but also in +// module mode. +#if 0 + + +void gpio_enable_pin_open_drain(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + gpio_port->odmers = 1 << (pin & 0x1F); +} + + +void gpio_disable_pin_open_drain(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + gpio_port->odmerc = 1 << (pin & 0x1F); +} + + +#endif + + +void gpio_enable_pin_pull_up(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + gpio_port->puers = 1 << (pin & 0x1F); +#if defined(AVR32_GPIO_200_H_INCLUDED) || defined(AVR32_GPIO_210_H_INCLUDED) || defined(AVR32_GPIO_211_H_INCLUDED) + gpio_port->pderc = 1 << (pin & 0x1F); +#endif +} + + +void gpio_disable_pin_pull_up(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + gpio_port->puerc = 1 << (pin & 0x1F); +} + +#if defined(AVR32_GPIO_200_H_INCLUDED) || defined(AVR32_GPIO_210_H_INCLUDED) || defined(AVR32_GPIO_211_H_INCLUDED) +// Added support of Pull-up Resistor, Pull-down Resistor and Buskeeper Control. + +/*! \brief Enables the pull-down resistor of a pin. + * + * \param pin The pin number. + */ +void gpio_enable_pin_pull_down(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + gpio_port->puerc = 1 << (pin & 0x1F); + gpio_port->pders = 1 << (pin & 0x1F); +} + +/*! \brief Disables the pull-down resistor of a pin. + * + * \param pin The pin number. + */ +void gpio_disable_pin_pull_down(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + gpio_port->pderc = 1 << (pin & 0x1F); +} + +/*! \brief Enables the buskeeper functionality on a pin. + * + * \param pin The pin number. + */ +void gpio_enable_pin_buskeeper(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + gpio_port->puers = 1 << (pin & 0x1F); + gpio_port->pders = 1 << (pin & 0x1F); +} + +/*! \brief Disables the buskeeper functionality on a pin. + * + * \param pin The pin number. + */ +void gpio_disable_pin_buskeeper(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + gpio_port->puerc = 1 << (pin & 0x1F); + gpio_port->pderc = 1 << (pin & 0x1F); +} + +#endif + +int gpio_get_pin_value(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + return (gpio_port->pvr >> (pin & 0x1F)) & 1; +} + + +int gpio_get_gpio_pin_output_value(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + return (gpio_port->ovr >> (pin & 0x1F)) & 1; +} + + +int gpio_get_gpio_open_drain_pin_output_value(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + return ((gpio_port->oder >> (pin & 0x1F)) & 1) ^ 1; +} + + +void gpio_set_gpio_pin(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + + gpio_port->ovrs = 1 << (pin & 0x1F); // Value to be driven on the I/O line: 1. + gpio_port->oders = 1 << (pin & 0x1F); // The GPIO output driver is enabled for that pin. + gpio_port->gpers = 1 << (pin & 0x1F); // The GPIO module controls that pin. +} + + +void gpio_clr_gpio_pin(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + + gpio_port->ovrc = 1 << (pin & 0x1F); // Value to be driven on the I/O line: 0. + gpio_port->oders = 1 << (pin & 0x1F); // The GPIO output driver is enabled for that pin. + gpio_port->gpers = 1 << (pin & 0x1F); // The GPIO module controls that pin. +} + + +void gpio_tgl_gpio_pin(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + + gpio_port->ovrt = 1 << (pin & 0x1F); // Toggle the I/O line. + gpio_port->oders = 1 << (pin & 0x1F); // The GPIO output driver is enabled for that pin. + gpio_port->gpers = 1 << (pin & 0x1F); // The GPIO module controls that pin. +} + + +void gpio_set_gpio_open_drain_pin(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + + gpio_port->oderc = 1 << (pin & 0x1F); // The GPIO output driver is disabled for that pin. + gpio_port->gpers = 1 << (pin & 0x1F); // The GPIO module controls that pin. +} + + +void gpio_clr_gpio_open_drain_pin(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + + gpio_port->ovrc = 1 << (pin & 0x1F); // Value to be driven on the I/O line: 0. + gpio_port->oders = 1 << (pin & 0x1F); // The GPIO output driver is enabled for that pin. + gpio_port->gpers = 1 << (pin & 0x1F); // The GPIO module controls that pin. +} + + +void gpio_tgl_gpio_open_drain_pin(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + + gpio_port->ovrc = 1 << (pin & 0x1F); // Value to be driven on the I/O line if the GPIO output driver is enabled: 0. + gpio_port->odert = 1 << (pin & 0x1F); // The GPIO output driver is toggled for that pin. + gpio_port->gpers = 1 << (pin & 0x1F); // The GPIO module controls that pin. +} + + +void gpio_enable_pin_glitch_filter(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + gpio_port->gfers = 1 << (pin & 0x1F); +} + + +void gpio_disable_pin_glitch_filter(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + gpio_port->gferc = 1 << (pin & 0x1F); +} + +/*! \brief Configure the edge detector of an input pin + * + * \param pin The pin number. + * \param mode The edge detection mode (\ref GPIO_PIN_CHANGE, \ref GPIO_RISING_EDGE + * or \ref GPIO_FALLING_EDGE). + * + * \return \ref GPIO_SUCCESS or \ref GPIO_INVALID_ARGUMENT. + */ +static int gpio_configure_edge_detector(unsigned int pin, unsigned int mode) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + + // Configure the edge detector. + switch (mode) + { + case GPIO_PIN_CHANGE: + gpio_port->imr0c = 1 << (pin & 0x1F); + gpio_port->imr1c = 1 << (pin & 0x1F); + break; + + case GPIO_RISING_EDGE: + gpio_port->imr0s = 1 << (pin & 0x1F); + gpio_port->imr1c = 1 << (pin & 0x1F); + break; + + case GPIO_FALLING_EDGE: + gpio_port->imr0c = 1 << (pin & 0x1F); + gpio_port->imr1s = 1 << (pin & 0x1F); + break; + + default: + return GPIO_INVALID_ARGUMENT; + } + + return GPIO_SUCCESS; +} + + +int gpio_enable_pin_interrupt(unsigned int pin, unsigned int mode) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + + // Enable the glitch filter. + gpio_port->gfers = 1 << (pin & 0x1F); + + // Configure the edge detector. + if(GPIO_INVALID_ARGUMENT == gpio_configure_edge_detector(pin, mode)) + return(GPIO_INVALID_ARGUMENT); + + // Enable interrupt. + gpio_port->iers = 1 << (pin & 0x1F); + + return GPIO_SUCCESS; +} + + +void gpio_disable_pin_interrupt(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + gpio_port->ierc = 1 << (pin & 0x1F); +} + + +int gpio_get_pin_interrupt_flag(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + return (gpio_port->ifr >> (pin & 0x1F)) & 1; +} + + +void gpio_clear_pin_interrupt_flag(unsigned int pin) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + gpio_port->ifrc = 1 << (pin & 0x1F); +} + + +//# +//# Peripheral Event System Support. +//# +#if UC3L +int gpio_configure_pin_periph_event_mode(unsigned int pin, unsigned int mode, unsigned int use_igf) +{ + volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5]; + + if(TRUE == use_igf) + { + // Enable the glitch filter. + gpio_port->gfers = 1 << (pin & 0x1F); + } + else + { + // Disable the glitch filter. + gpio_port->gferc = 1 << (pin & 0x1F); + } + + // Configure the edge detector. + return(gpio_configure_edge_detector(pin, mode)); +} + +#endif + +//! @} diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/GPIO/gpio.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/GPIO/gpio.h new file mode 100644 index 0000000000..3aa700bd8b --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/GPIO/gpio.h @@ -0,0 +1,583 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file has been prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief GPIO header for AVR32 UC3. + * + * This file contains basic GPIO driver functions. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices with a GPIO module can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + *****************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef _GPIO_H_ +#define _GPIO_H_ + +#include +#include "compiler.h" + +/*! \name Return Values of the GPIO API + */ +//! @{ +#define GPIO_SUCCESS 0 //!< Function successfully completed. +#define GPIO_INVALID_ARGUMENT 1 //!< Input parameters are out of range. +//! @} + + +/*! \name Interrupt Trigger Modes + */ +//! @{ +#define GPIO_PIN_CHANGE 0 //!< Interrupt triggered upon pin change. +#define GPIO_RISING_EDGE 1 //!< Interrupt triggered upon rising edge. +#define GPIO_FALLING_EDGE 2 //!< Interrupt triggered upon falling edge. +//! @} + + +//! A type definition of pins and modules connectivity. +typedef struct +{ + unsigned char pin; //!< Module pin. + unsigned char function; //!< Module function. +} gpio_map_t[]; + + +/*! \name Peripheral Bus Interface + * + * Low-speed interface with a non-deterministic number of clock cycles per + * access. + * + * This interface operates with lower clock frequencies (fPB <= fCPU), and its + * timing is not deterministic since it needs to access a shared bus which may + * be heavily loaded. + * + * \note This interface is immediately available without initialization. + */ +//! @{ + +/*! \brief Enables specific module modes for a set of pins. + * + * \param gpiomap The pin map. + * \param size The number of pins in \a gpiomap. + * + * \return \ref GPIO_SUCCESS or \ref GPIO_INVALID_ARGUMENT. + */ +extern int gpio_enable_module(const gpio_map_t gpiomap, unsigned int size); + +/*! \brief Enables a specific module mode for a pin. + * + * \param pin The pin number.\n + * Refer to the product header file `uc3x.h' (where x is the part + * number; e.g. x = a0512) for module pins. E.g., to enable a PWM + * channel output, the pin number can be AVR32_PWM_3_PIN for PWM + * channel 3. + * \param function The pin function.\n + * Refer to the product header file `uc3x.h' (where x is the + * part number; e.g. x = a0512) for module pin functions. E.g., + * to enable a PWM channel output, the pin function can be + * AVR32_PWM_3_FUNCTION for PWM channel 3. + * + * \return \ref GPIO_SUCCESS or \ref GPIO_INVALID_ARGUMENT. + */ +extern int gpio_enable_module_pin(unsigned int pin, unsigned int function); + +/*! \brief Enables the GPIO mode of a set of pins. + * + * \param gpiomap The pin map. + * \param size The number of pins in \a gpiomap. + */ +extern void gpio_enable_gpio(const gpio_map_t gpiomap, unsigned int size); + +/*! \brief Enables the GPIO mode of a pin. + * + * \param pin The pin number.\n + * Refer to the product header file `uc3x.h' (where x is the part + * number; e.g. x = a0512) for pin definitions. E.g., to enable the + * GPIO mode of PX21, AVR32_PIN_PX21 can be used. Module pins such as + * AVR32_PWM_3_PIN for PWM channel 3 can also be used to release + * module pins for GPIO. + */ +extern void gpio_enable_gpio_pin(unsigned int pin); + +// The open-drain mode is not synthesized on the current AVR32 products. +// If one day some AVR32 products have this feature, the corresponding part +// numbers should be listed in the #if below. +// Note that other functions are available in this driver to use pins with open +// drain in GPIO mode. The advantage of the open-drain mode functions over these +// other functions is that they can be used not only in GPIO mode but also in +// module mode. +#if 0 + +/*! \brief Enables the open-drain mode of a pin. + * + * \param pin The pin number. + */ +extern void gpio_enable_pin_open_drain(unsigned int pin); + +/*! \brief Disables the open-drain mode of a pin. + * + * \param pin The pin number. + */ +extern void gpio_disable_pin_open_drain(unsigned int pin); + +#endif + +/*! \brief Enables the pull-up resistor of a pin. + * + * \param pin The pin number. + */ +extern void gpio_enable_pin_pull_up(unsigned int pin); + +/*! \brief Disables the pull-up resistor of a pin. + * + * \param pin The pin number. + */ +extern void gpio_disable_pin_pull_up(unsigned int pin); + +#if defined(AVR32_GPIO_200_H_INCLUDED) || defined(AVR32_GPIO_210_H_INCLUDED) || defined(AVR32_GPIO_211_H_INCLUDED) +// Added support of Pull-up Resistor, Pull-down Resistor and Buskeeper Control. + +/*! \brief Enables the pull-down resistor of a pin. + * + * \param pin The pin number. + */ +extern void gpio_enable_pin_pull_down(unsigned int pin); + +/*! \brief Disables the pull-down resistor of a pin. + * + * \param pin The pin number. + */ +extern void gpio_disable_pin_pull_down(unsigned int pin); + +/*! \brief Enables the buskeeper functionality on a pin. + * + * \param pin The pin number. + */ +extern void gpio_enable_pin_buskeeper(unsigned int pin); + +/*! \brief Disables the buskeeper functionality on a pin. + * + * \param pin The pin number. + */ +extern void gpio_disable_pin_buskeeper(unsigned int pin); + +#endif + +/*! \brief Returns the value of a pin. + * + * \param pin The pin number. + * + * \return The pin value. + */ +extern int gpio_get_pin_value(unsigned int pin); + +/*! \brief Returns the output value set for a GPIO pin. + * + * \param pin The pin number. + * + * \return The pin output value. + * + * \note This function must be used in conjunction with \ref gpio_set_gpio_pin, + * \ref gpio_clr_gpio_pin and \ref gpio_tgl_gpio_pin. + */ +extern int gpio_get_gpio_pin_output_value(unsigned int pin); + +/*! \brief Returns the output value set for a GPIO pin using open drain. + * + * \param pin The pin number. + * + * \return The pin output value. + * + * \note This function must be used in conjunction with + * \ref gpio_set_gpio_open_drain_pin, \ref gpio_clr_gpio_open_drain_pin + * and \ref gpio_tgl_gpio_open_drain_pin. + */ +extern int gpio_get_gpio_open_drain_pin_output_value(unsigned int pin); + +/*! \brief Drives a GPIO pin to 1. + * + * \param pin The pin number. + */ +extern void gpio_set_gpio_pin(unsigned int pin); + +/*! \brief Drives a GPIO pin to 0. + * + * \param pin The pin number. + */ +extern void gpio_clr_gpio_pin(unsigned int pin); + +/*! \brief Toggles a GPIO pin. + * + * \param pin The pin number. + */ +extern void gpio_tgl_gpio_pin(unsigned int pin); + +/*! \brief Drives a GPIO pin to 1 using open drain. + * + * \param pin The pin number. + */ +extern void gpio_set_gpio_open_drain_pin(unsigned int pin); + +/*! \brief Drives a GPIO pin to 0 using open drain. + * + * \param pin The pin number. + */ +extern void gpio_clr_gpio_open_drain_pin(unsigned int pin); + +/*! \brief Toggles a GPIO pin using open drain. + * + * \param pin The pin number. + */ +extern void gpio_tgl_gpio_open_drain_pin(unsigned int pin); + +/*! \brief Enables the glitch filter of a pin. + * + * When the glitch filter is enabled, a glitch with duration of less than 1 + * clock cycle is automatically rejected, while a pulse with duration of 2 clock + * cycles or more is accepted. For pulse durations between 1 clock cycle and 2 + * clock cycles, the pulse may or may not be taken into account, depending on + * the precise timing of its occurrence. Thus for a pulse to be guaranteed + * visible it must exceed 2 clock cycles, whereas for a glitch to be reliably + * filtered out, its duration must not exceed 1 clock cycle. The filter + * introduces 2 clock cycles latency. + * + * \param pin The pin number. + */ +extern void gpio_enable_pin_glitch_filter(unsigned int pin); + +/*! \brief Disables the glitch filter of a pin. + * + * \param pin The pin number. + */ +extern void gpio_disable_pin_glitch_filter(unsigned int pin); + +/*! \brief Enables the interrupt of a pin with the specified settings. + * + * \param pin The pin number. + * \param mode The trigger mode (\ref GPIO_PIN_CHANGE, \ref GPIO_RISING_EDGE or + * \ref GPIO_FALLING_EDGE). + * + * \return \ref GPIO_SUCCESS or \ref GPIO_INVALID_ARGUMENT. + */ +extern int gpio_enable_pin_interrupt(unsigned int pin, unsigned int mode); + +/*! \brief Disables the interrupt of a pin. + * + * \param pin The pin number. + */ +extern void gpio_disable_pin_interrupt(unsigned int pin); + +/*! \brief Gets the interrupt flag of a pin. + * + * \param pin The pin number. + * + * \return The pin interrupt flag. + */ +extern int gpio_get_pin_interrupt_flag(unsigned int pin); + +/*! \brief Clears the interrupt flag of a pin. + * + * \param pin The pin number. + */ +extern void gpio_clear_pin_interrupt_flag(unsigned int pin); + +//! @} + + +#if (defined AVR32_GPIO_LOCAL_ADDRESS) +/*! \name Local Bus Interface + * + * High-speed interface with only one clock cycle per access. + * + * This interface operates with high clock frequency (fCPU), and its timing is + * deterministic since it does not need to access a shared bus which may be + * heavily loaded. + * + * \warning To use this interface, the clock frequency of the peripheral bus on + * which the GPIO peripheral is connected must be set to the CPU clock + * frequency (fPB = fCPU). + * + * \note This interface has to be initialized in order to be available. + */ +//! @{ + +/*! \brief Enables the local bus interface for GPIO. + * + * \note This function must have been called at least once before using other + * functions in this interface. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void gpio_local_init(void) +{ + Set_system_register(AVR32_CPUCR, + Get_system_register(AVR32_CPUCR) | AVR32_CPUCR_LOCEN_MASK); +} + +/*! \brief Enables the output driver of a pin. + * + * \param pin The pin number. + * + * \note \ref gpio_local_init must have been called beforehand. + * + * \note This function does not enable the GPIO mode of the pin. + * \ref gpio_enable_gpio_pin can be called for this purpose. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void gpio_local_enable_pin_output_driver(unsigned int pin) +{ + AVR32_GPIO_LOCAL.port[pin >> 5].oders = 1 << (pin & 0x1F); +} + +/*! \brief Disables the output driver of a pin. + * + * \param pin The pin number. + * + * \note \ref gpio_local_init must have been called beforehand. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void gpio_local_disable_pin_output_driver(unsigned int pin) +{ + AVR32_GPIO_LOCAL.port[pin >> 5].oderc = 1 << (pin & 0x1F); +} + +/*! \brief Returns the value of a pin. + * + * \param pin The pin number. + * + * \return The pin value. + * + * \note \ref gpio_local_init must have been called beforehand. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ int gpio_local_get_pin_value(unsigned int pin) +{ + return (AVR32_GPIO_LOCAL.port[pin >> 5].pvr >> (pin & 0x1F)) & 1; +} + +/*! \brief Drives a GPIO pin to 1. + * + * \param pin The pin number. + * + * \note \ref gpio_local_init must have been called beforehand. + * + * \note This function does not enable the GPIO mode of the pin nor its output + * driver. \ref gpio_enable_gpio_pin and + * \ref gpio_local_enable_pin_output_driver can be called for this + * purpose. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void gpio_local_set_gpio_pin(unsigned int pin) +{ + AVR32_GPIO_LOCAL.port[pin >> 5].ovrs = 1 << (pin & 0x1F); +} + +/*! \brief Drives a GPIO pin to 0. + * + * \param pin The pin number. + * + * \note \ref gpio_local_init must have been called beforehand. + * + * \note This function does not enable the GPIO mode of the pin nor its output + * driver. \ref gpio_enable_gpio_pin and + * \ref gpio_local_enable_pin_output_driver can be called for this + * purpose. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void gpio_local_clr_gpio_pin(unsigned int pin) +{ + AVR32_GPIO_LOCAL.port[pin >> 5].ovrc = 1 << (pin & 0x1F); +} + +/*! \brief Toggles a GPIO pin. + * + * \param pin The pin number. + * + * \note \ref gpio_local_init must have been called beforehand. + * + * \note This function does not enable the GPIO mode of the pin nor its output + * driver. \ref gpio_enable_gpio_pin and + * \ref gpio_local_enable_pin_output_driver can be called for this + * purpose. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void gpio_local_tgl_gpio_pin(unsigned int pin) +{ + AVR32_GPIO_LOCAL.port[pin >> 5].ovrt = 1 << (pin & 0x1F); +} + +/*! \brief Initializes the configuration of a GPIO pin so that it can be used + * with GPIO open-drain functions. + * + * \note This function must have been called at least once before using + * \ref gpio_local_set_gpio_open_drain_pin, + * \ref gpio_local_clr_gpio_open_drain_pin or + * \ref gpio_local_tgl_gpio_open_drain_pin. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void gpio_local_init_gpio_open_drain_pin(unsigned int pin) +{ + AVR32_GPIO_LOCAL.port[pin >> 5].ovrc = 1 << (pin & 0x1F); +} + +/*! \brief Drives a GPIO pin to 1 using open drain. + * + * \param pin The pin number. + * + * \note \ref gpio_local_init and \ref gpio_local_init_gpio_open_drain_pin must + * have been called beforehand. + * + * \note This function does not enable the GPIO mode of the pin. + * \ref gpio_enable_gpio_pin can be called for this purpose. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void gpio_local_set_gpio_open_drain_pin(unsigned int pin) +{ + AVR32_GPIO_LOCAL.port[pin >> 5].oderc = 1 << (pin & 0x1F); +} + +/*! \brief Drives a GPIO pin to 0 using open drain. + * + * \param pin The pin number. + * + * \note \ref gpio_local_init and \ref gpio_local_init_gpio_open_drain_pin must + * have been called beforehand. + * + * \note This function does not enable the GPIO mode of the pin. + * \ref gpio_enable_gpio_pin can be called for this purpose. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void gpio_local_clr_gpio_open_drain_pin(unsigned int pin) +{ + AVR32_GPIO_LOCAL.port[pin >> 5].oders = 1 << (pin & 0x1F); +} + +/*! \brief Toggles a GPIO pin using open drain. + * + * \param pin The pin number. + * + * \note \ref gpio_local_init and \ref gpio_local_init_gpio_open_drain_pin must + * have been called beforehand. + * + * \note This function does not enable the GPIO mode of the pin. + * \ref gpio_enable_gpio_pin can be called for this purpose. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void gpio_local_tgl_gpio_open_drain_pin(unsigned int pin) +{ + AVR32_GPIO_LOCAL.port[pin >> 5].odert = 1 << (pin & 0x1F); +} + +//! @} +#endif // AVR32_GPIO_LOCAL_ADDRESS + +#if UC3L +//! @{ +/*! \name Peripheral Event System support + * + * The GPIO can be programmed to output peripheral events whenever an interrupt + * condition is detected, such as pin value change, or only when a rising or + * falling edge is detected. + * + */ + +/*! \brief Enables the peripheral event generation of a pin. + * + * \param pin The pin number. + * + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void gpio_enable_pin_periph_event(unsigned int pin) +{ + AVR32_GPIO.port[pin >> 5].oderc = 1 << (pin & 0x1F); // The GPIO output driver is disabled for that pin. + AVR32_GPIO.port[pin >> 5].evers = 1 << (pin & 0x1F); +} + +/*! \brief Disables the peripheral event generation of a pin. + * + * \param pin The pin number. + * + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void gpio_disable_pin_periph_event(unsigned int pin) +{ + AVR32_GPIO.port[pin >> 5].everc = 1 << (pin & 0x1F); +} + +/*! \brief Configure the peripheral event trigger mode of a pin + * + * \param pin The pin number. + * \param mode The trigger mode (\ref GPIO_PIN_CHANGE, \ref GPIO_RISING_EDGE or + * \ref GPIO_FALLING_EDGE). + * \param use_igf use the Input Glitch Filter (TRUE) or not (FALSE). + * + * \return \ref GPIO_SUCCESS or \ref GPIO_INVALID_ARGUMENT. + */ +extern int gpio_configure_pin_periph_event_mode(unsigned int pin, unsigned int mode, unsigned int use_igf); + +//! @} +#endif + + +#endif // _GPIO_H_ diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x new file mode 100644 index 0000000000..70534d9f19 --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/INTC/exception.x @@ -0,0 +1,239 @@ +/* This file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief Exception and interrupt vectors. + * + * This file maps all events supported by an AVR32. + * + * - Compiler: GNU GCC for AVR32 + * - Supported devices: All AVR32 devices with an INTC module can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#if !__AVR32_UC__ && !__AVR32_AP__ + #error Implementation of the AVR32 architecture not supported by the INTC driver. +#endif + + +#include + + +//! @{ +//! \verbatim + + + .section .exception, "ax", @progbits + + +// Start of Exception Vector Table. + + // EVBA must be aligned with a power of two strictly greater than the EVBA- + // relative offset of the last vector. + .balign 0x200 + + // Export symbol. + .global _evba + .type _evba, @function +_evba: + + .org 0x000 + // Unrecoverable Exception. +_handle_Unrecoverable_Exception: + rjmp $ + + .org 0x004 + // TLB Multiple Hit. +_handle_TLB_Multiple_Hit: + rjmp $ + + .org 0x008 + // Bus Error Data Fetch. +_handle_Bus_Error_Data_Fetch: + rjmp $ + + .org 0x00C + // Bus Error Instruction Fetch. +_handle_Bus_Error_Instruction_Fetch: + rjmp $ + + .org 0x010 + // NMI. +_handle_NMI: + rjmp $ + + .org 0x014 + // Instruction Address. +_handle_Instruction_Address: + rjmp $ + + .org 0x018 + // ITLB Protection. +_handle_ITLB_Protection: + rjmp $ + + .org 0x01C + // Breakpoint. +_handle_Breakpoint: + rjmp $ + + .org 0x020 + // Illegal Opcode. +_handle_Illegal_Opcode: + rjmp $ + + .org 0x024 + // Unimplemented Instruction. +_handle_Unimplemented_Instruction: + rjmp $ + + .org 0x028 + // Privilege Violation. +_handle_Privilege_Violation: + rjmp $ + + .org 0x02C + // Floating-Point: UNUSED IN AVR32UC and AVR32AP. +_handle_Floating_Point: + rjmp $ + + .org 0x030 + // Coprocessor Absent: UNUSED IN AVR32UC. +_handle_Coprocessor_Absent: + rjmp $ + + .org 0x034 + // Data Address (Read). +_handle_Data_Address_Read: + rjmp $ + + .org 0x038 + // Data Address (Write). +_handle_Data_Address_Write: + rjmp $ + + .org 0x03C + // DTLB Protection (Read). +_handle_DTLB_Protection_Read: + rjmp $ + + .org 0x040 + // DTLB Protection (Write). +_handle_DTLB_Protection_Write: + rjmp $ + + .org 0x044 + // DTLB Modified: UNUSED IN AVR32UC. +_handle_DTLB_Modified: + rjmp $ + + .org 0x050 + // ITLB Miss. +_handle_ITLB_Miss: + rjmp $ + + .org 0x060 + // DTLB Miss (Read). +_handle_DTLB_Miss_Read: + rjmp $ + + .org 0x070 + // DTLB Miss (Write). +_handle_DTLB_Miss_Write: + rjmp $ + + .org 0x100 + // Supervisor Call. +_handle_Supervisor_Call: + rjmp $ + + +// Interrupt support. +// The interrupt controller must provide the offset address relative to EVBA. +// Important note: +// All interrupts call a C function named _get_interrupt_handler. +// This function will read group and interrupt line number to then return in +// R12 a pointer to a user-provided interrupt handler. + + .balign 4 + + .irp priority, 0, 1, 2, 3 +_int\priority: +#if __AVR32_UC__ + // R8-R12, LR, PC and SR are automatically pushed onto the system stack by the + // CPU upon interrupt entry. No other register is saved by hardware. +#elif __AVR32_AP__ + // PC and SR are automatically saved in respectively RAR_INTx and RSR_INTx by + // the CPU upon interrupt entry. No other register is saved by hardware. + pushm r8-r12, lr +#endif + mov r12, \priority // Pass the int_level parameter to the _get_interrupt_handler function. + call _get_interrupt_handler + cp.w r12, 0 // Get the pointer to the interrupt handler returned by the function. +#if __AVR32_UC__ + movne pc, r12 // If this was not a spurious interrupt (R12 != NULL), jump to the handler. +#elif __AVR32_AP__ + breq spint\priority // If this was a spurious interrupt (R12 == NULL), branch. + st.w --sp, r12 // Push the pointer to the interrupt handler onto the system stack since no register may be altered. + popm r8-r12, lr, pc // Restore registers and jump to the handler. +spint\priority: + popm r8-r12, lr +#endif + rete // If this was a spurious interrupt (R12 == NULL), return from event handler. + .endr + + +// Constant data area. + + .balign 4 + + // Values to store in the interrupt priority registers for the various interrupt priority levels. + // The interrupt priority registers contain the interrupt priority level and + // the EVBA-relative interrupt vector offset. + .global ipr_val + .type ipr_val, @object +ipr_val: + .word (AVR32_INTC_INT0 << AVR32_INTC_IPR_INTLEVEL_OFFSET) | (_int0 - _evba),\ + (AVR32_INTC_INT1 << AVR32_INTC_IPR_INTLEVEL_OFFSET) | (_int1 - _evba),\ + (AVR32_INTC_INT2 << AVR32_INTC_IPR_INTLEVEL_OFFSET) | (_int2 - _evba),\ + (AVR32_INTC_INT3 << AVR32_INTC_IPR_INTLEVEL_OFFSET) | (_int3 - _evba) + + +//! \endverbatim +//! @} diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/INTC/intc.c b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/INTC/intc.c new file mode 100644 index 0000000000..03dd56bbef --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/INTC/intc.c @@ -0,0 +1,214 @@ +/* This source file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief INTC driver for AVR32 UC3. + * + * AVR32 Interrupt Controller driver module. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices with an INTC module can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#include +#include "compiler.h" +#include "preprocessor.h" +#include "intc.h" + +// define _evba from exception.S +extern void _evba; + +//! Values to store in the interrupt priority registers for the various interrupt priority levels. +extern const unsigned int ipr_val[AVR32_INTC_NUM_INT_LEVELS]; + +//! Creates a table of interrupt line handlers per interrupt group in order to optimize RAM space. +//! Each line handler table contains a set of pointers to interrupt handlers. +#if (defined __GNUC__) +#define DECL_INT_LINE_HANDLER_TABLE(GRP, unused) \ +static volatile __int_handler _int_line_handler_table_##GRP[Max(AVR32_INTC_NUM_IRQS_PER_GRP##GRP, 1)]; +#elif (defined __ICCAVR32__) +#define DECL_INT_LINE_HANDLER_TABLE(GRP, unused) \ +static volatile __no_init __int_handler _int_line_handler_table_##GRP[Max(AVR32_INTC_NUM_IRQS_PER_GRP##GRP, 1)]; +#endif +MREPEAT(AVR32_INTC_NUM_INT_GRPS, DECL_INT_LINE_HANDLER_TABLE, ~); +#undef DECL_INT_LINE_HANDLER_TABLE + +//! Table containing for each interrupt group the number of interrupt request +//! lines and a pointer to the table of interrupt line handlers. +static const struct +{ + unsigned int num_irqs; + volatile __int_handler *_int_line_handler_table; +} _int_handler_table[AVR32_INTC_NUM_INT_GRPS] = +{ +#define INSERT_INT_LINE_HANDLER_TABLE(GRP, unused) \ + {AVR32_INTC_NUM_IRQS_PER_GRP##GRP, _int_line_handler_table_##GRP}, + MREPEAT(AVR32_INTC_NUM_INT_GRPS, INSERT_INT_LINE_HANDLER_TABLE, ~) +#undef INSERT_INT_LINE_HANDLER_TABLE +}; + + +/*! \brief Default interrupt handler. + * + * \note Taken and adapted from Newlib. + */ +#if (defined __GNUC__) +__attribute__((__interrupt__)) +#elif (defined __ICCAVR32__) +__interrupt +#endif +static void _unhandled_interrupt(void) +{ + // Catch unregistered interrupts. + while (TRUE); +} + + +/*! \brief Gets the interrupt handler of the current event at the \a int_level + * interrupt priority level (called from exception.S). + * + * \param int_level Interrupt priority level to handle. + * + * \return Interrupt handler to execute. + * + * \note Taken and adapted from Newlib. + */ +__int_handler _get_interrupt_handler(unsigned int int_level) +{ + // ICR3 is mapped first, ICR0 last. + // Code in exception.S puts int_level in R12 which is used by AVR32-GCC to + // pass a single argument to a function. + unsigned int int_grp = AVR32_INTC.icr[AVR32_INTC_INT3 - int_level]; + unsigned int int_req = AVR32_INTC.irr[int_grp]; + + // As an interrupt may disappear while it is being fetched by the CPU + // (spurious interrupt caused by a delayed response from an MCU peripheral to + // an interrupt flag clear or interrupt disable instruction), check if there + // are remaining interrupt lines to process. + // If a spurious interrupt occurs, the status register (SR) contains an + // execution mode and interrupt level masks corresponding to a level 0 + // interrupt, whatever the interrupt priority level causing the spurious + // event. This behavior has been chosen because a spurious interrupt has not + // to be a priority one and because it may not cause any trouble to other + // interrupts. + // However, these spurious interrupts place the hardware in an unstable state + // and could give problems in other/future versions of the CPU, so the + // software has to be written so that they never occur. The only safe way of + // achieving this is to always clear or disable peripheral interrupts with the + // following sequence: + // 1: Mask the interrupt in the CPU by setting GM (or IxM) in SR. + // 2: Perform the bus access to the peripheral register that clears or + // disables the interrupt. + // 3: Wait until the interrupt has actually been cleared or disabled by the + // peripheral. This is usually performed by reading from a register in the + // same peripheral (it DOES NOT have to be the same register that was + // accessed in step 2, but it MUST be in the same peripheral), what takes + // bus system latencies into account, but peripheral internal latencies + // (generally 0 cycle) also have to be considered. + // 4: Unmask the interrupt in the CPU by clearing GM (or IxM) in SR. + // Note that steps 1 and 4 are useless inside interrupt handlers as the + // corresponding interrupt level is automatically masked by IxM (unless IxM is + // explicitly cleared by the software). + // + // Get the right IRQ handler. + // + // If several interrupt lines are active in the group, the interrupt line with + // the highest number is selected. This is to be coherent with the + // prioritization of interrupt groups performed by the hardware interrupt + // controller. + // + // If no handler has been registered for the pending interrupt, + // _unhandled_interrupt will be selected thanks to the initialization of + // _int_line_handler_table_x by INTC_init_interrupts. + // + // exception.S will provide the interrupt handler with a clean interrupt stack + // frame, with nothing more pushed onto the stack. The interrupt handler must + // manage the `rete' instruction, what can be done thanks to pure assembly, + // inline assembly or the `__attribute__((__interrupt__))' C function + // attribute. + return (int_req) ? _int_handler_table[int_grp]._int_line_handler_table[32 - clz(int_req) - 1] : NULL; +} + +//! Init EVBA address. This sequence might also be done in the UTILS/STARTUP/GCC/crt0.S +static __inline__ void INTC_init_evba(void) +{ + Set_system_register(AVR32_EVBA, (int)&_evba ); +} + +void INTC_init_interrupts(void) +{ + unsigned int int_grp, int_req; + + INTC_init_evba(); + + // For all interrupt groups, + for (int_grp = 0; int_grp < AVR32_INTC_NUM_INT_GRPS; int_grp++) + { + // For all interrupt request lines of each group, + for (int_req = 0; int_req < _int_handler_table[int_grp].num_irqs; int_req++) + { + // Assign _unhandled_interrupt as default interrupt handler. + _int_handler_table[int_grp]._int_line_handler_table[int_req] = &_unhandled_interrupt; + } + + // Set the interrupt group priority register to its default value. + // By default, all interrupt groups are linked to the interrupt priority + // level 0 and to the interrupt vector _int0. + AVR32_INTC.ipr[int_grp] = ipr_val[AVR32_INTC_INT0]; + } +} + + +void INTC_register_interrupt(__int_handler handler, unsigned int irq, unsigned int int_level) +{ + // Determine the group of the IRQ. + unsigned int int_grp = irq / AVR32_INTC_MAX_NUM_IRQS_PER_GRP; + + // Store in _int_line_handler_table_x the pointer to the interrupt handler, so + // that _get_interrupt_handler can retrieve it when the interrupt is vectored. + _int_handler_table[int_grp]._int_line_handler_table[irq % AVR32_INTC_MAX_NUM_IRQS_PER_GRP] = handler; + + // Program the corresponding IPRX register to set the interrupt priority level + // and the interrupt vector offset that will be fetched by the core interrupt + // system. + // NOTE: The _intx functions are intermediate assembly functions between the + // core interrupt system and the user interrupt handler. + AVR32_INTC.ipr[int_grp] = ipr_val[int_level & (AVR32_INTC_IPR_INTLEVEL_MASK >> AVR32_INTC_IPR_INTLEVEL_OFFSET)]; +} diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/INTC/intc.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/INTC/intc.h new file mode 100644 index 0000000000..035f0a9ed0 --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/INTC/intc.h @@ -0,0 +1,100 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief INTC driver for AVR32 UC3. + * + * AVR32 Interrupt Controller driver module. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices with an INTC module can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef _INTC_H_ +#define _INTC_H_ + +#include "compiler.h" + + +//! Maximal number of interrupt request lines per group. +#define AVR32_INTC_MAX_NUM_IRQS_PER_GRP 32 + +//! Number of interrupt priority levels. +#define AVR32_INTC_NUM_INT_LEVELS (1 << AVR32_INTC_IPR_INTLEVEL_SIZE) + + +#ifdef __AVR32_ABI_COMPILER__ // Automatically defined when compiling for AVR32, not when assembling. + +//! Pointer to interrupt handler. +#if (defined __GNUC__) +typedef void (*__int_handler)(void); +#elif (defined __ICCAVR32__) +typedef void (__interrupt *__int_handler)(void); +#endif + + +/*! \brief Initializes the hardware interrupt controller driver. + * + * \note Taken and adapted from Newlib. + */ +extern void INTC_init_interrupts(void); + +/*! \brief Registers an interrupt handler. + * + * \param handler Interrupt handler to register. + * \param irq IRQ of the interrupt handler to register. + * \param int_level Interrupt priority level to assign to the group of this IRQ. + * + * \warning The interrupt handler must manage the `rete' instruction, what can + * be done thanks to pure assembly, inline assembly or the + * `__attribute__((__interrupt__))' C function attribute. + * + * \warning If several interrupt handlers of a same group are registered with + * different priority levels, only the latest priority level set will + * be effective. + * + * \note Taken and adapted from Newlib. + */ +extern void INTC_register_interrupt(__int_handler handler, unsigned int irq, unsigned int int_level); + +#endif // __AVR32_ABI_COMPILER__ + + +#endif // _INTC_H_ diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/PM/pm.c b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/PM/pm.c new file mode 100644 index 0000000000..e1a55fbd17 --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/PM/pm.c @@ -0,0 +1,546 @@ +/* This source file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file has been prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief Power Manager driver. + * + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + *****************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#include "compiler.h" +#include "pm.h" + + +/*! \name PM Writable Bit-Field Registers + */ +//! @{ + +typedef union +{ + unsigned long mcctrl; + avr32_pm_mcctrl_t MCCTRL; +} u_avr32_pm_mcctrl_t; + +typedef union +{ + unsigned long cksel; + avr32_pm_cksel_t CKSEL; +} u_avr32_pm_cksel_t; + +typedef union +{ + unsigned long pll; + avr32_pm_pll_t PLL; +} u_avr32_pm_pll_t; + +typedef union +{ + unsigned long oscctrl0; + avr32_pm_oscctrl0_t OSCCTRL0; +} u_avr32_pm_oscctrl0_t; + +typedef union +{ + unsigned long oscctrl1; + avr32_pm_oscctrl1_t OSCCTRL1; +} u_avr32_pm_oscctrl1_t; + +typedef union +{ + unsigned long oscctrl32; + avr32_pm_oscctrl32_t OSCCTRL32; +} u_avr32_pm_oscctrl32_t; + +typedef union +{ + unsigned long ier; + avr32_pm_ier_t IER; +} u_avr32_pm_ier_t; + +typedef union +{ + unsigned long idr; + avr32_pm_idr_t IDR; +} u_avr32_pm_idr_t; + +typedef union +{ + unsigned long icr; + avr32_pm_icr_t ICR; +} u_avr32_pm_icr_t; + +typedef union +{ + unsigned long gcctrl; + avr32_pm_gcctrl_t GCCTRL; +} u_avr32_pm_gcctrl_t; + +typedef union +{ + unsigned long rccr; + avr32_pm_rccr_t RCCR; +} u_avr32_pm_rccr_t; + +typedef union +{ + unsigned long bgcr; + avr32_pm_bgcr_t BGCR; +} u_avr32_pm_bgcr_t; + +typedef union +{ + unsigned long vregcr; + avr32_pm_vregcr_t VREGCR; +} u_avr32_pm_vregcr_t; + +typedef union +{ + unsigned long bod; + avr32_pm_bod_t BOD; +} u_avr32_pm_bod_t; + +//! @} + + +/*! \brief Sets the mode of the oscillator 0. + * + * \param pm Base address of the Power Manager (i.e. &AVR32_PM). + * \param mode Oscillator 0 mode (i.e. AVR32_PM_OSCCTRL0_MODE_x). + */ +static void pm_set_osc0_mode(volatile avr32_pm_t *pm, unsigned int mode) +{ + // Read + u_avr32_pm_oscctrl0_t u_avr32_pm_oscctrl0 = {pm->oscctrl0}; + // Modify + u_avr32_pm_oscctrl0.OSCCTRL0.mode = mode; + // Write + pm->oscctrl0 = u_avr32_pm_oscctrl0.oscctrl0; +} + + +void pm_enable_osc0_ext_clock(volatile avr32_pm_t *pm) +{ + pm_set_osc0_mode(pm, AVR32_PM_OSCCTRL0_MODE_EXT_CLOCK); +} + + +void pm_enable_osc0_crystal(volatile avr32_pm_t *pm, unsigned int fosc0) +{ + pm_set_osc0_mode(pm, (fosc0 < 900000) ? AVR32_PM_OSCCTRL0_MODE_CRYSTAL_G0 : + (fosc0 < 3000000) ? AVR32_PM_OSCCTRL0_MODE_CRYSTAL_G1 : + (fosc0 < 8000000) ? AVR32_PM_OSCCTRL0_MODE_CRYSTAL_G2 : + AVR32_PM_OSCCTRL0_MODE_CRYSTAL_G3); +} + + +void pm_enable_clk0(volatile avr32_pm_t *pm, unsigned int startup) +{ + pm_enable_clk0_no_wait(pm, startup); + pm_wait_for_clk0_ready(pm); +} + + +void pm_disable_clk0(volatile avr32_pm_t *pm) +{ + pm->mcctrl &= ~AVR32_PM_MCCTRL_OSC0EN_MASK; +} + + +void pm_enable_clk0_no_wait(volatile avr32_pm_t *pm, unsigned int startup) +{ + // Read register + u_avr32_pm_oscctrl0_t u_avr32_pm_oscctrl0 = {pm->oscctrl0}; + // Modify + u_avr32_pm_oscctrl0.OSCCTRL0.startup = startup; + // Write back + pm->oscctrl0 = u_avr32_pm_oscctrl0.oscctrl0; + + pm->mcctrl |= AVR32_PM_MCCTRL_OSC0EN_MASK; +} + + +void pm_wait_for_clk0_ready(volatile avr32_pm_t *pm) +{ + while (!(pm->poscsr & AVR32_PM_POSCSR_OSC0RDY_MASK)); +} + + +/*! \brief Sets the mode of the oscillator 1. + * + * \param pm Base address of the Power Manager (i.e. &AVR32_PM). + * \param mode Oscillator 1 mode (i.e. AVR32_PM_OSCCTRL1_MODE_x). + */ +static void pm_set_osc1_mode(volatile avr32_pm_t *pm, unsigned int mode) +{ + // Read + u_avr32_pm_oscctrl1_t u_avr32_pm_oscctrl1 = {pm->oscctrl1}; + // Modify + u_avr32_pm_oscctrl1.OSCCTRL1.mode = mode; + // Write + pm->oscctrl1 = u_avr32_pm_oscctrl1.oscctrl1; +} + + +void pm_enable_osc1_ext_clock(volatile avr32_pm_t *pm) +{ + pm_set_osc1_mode(pm, AVR32_PM_OSCCTRL1_MODE_EXT_CLOCK); +} + + +void pm_enable_osc1_crystal(volatile avr32_pm_t *pm, unsigned int fosc1) +{ + pm_set_osc1_mode(pm, (fosc1 < 900000) ? AVR32_PM_OSCCTRL1_MODE_CRYSTAL_G0 : + (fosc1 < 3000000) ? AVR32_PM_OSCCTRL1_MODE_CRYSTAL_G1 : + (fosc1 < 8000000) ? AVR32_PM_OSCCTRL1_MODE_CRYSTAL_G2 : + AVR32_PM_OSCCTRL1_MODE_CRYSTAL_G3); +} + + +void pm_enable_clk1(volatile avr32_pm_t *pm, unsigned int startup) +{ + pm_enable_clk1_no_wait(pm, startup); + pm_wait_for_clk1_ready(pm); +} + + +void pm_disable_clk1(volatile avr32_pm_t *pm) +{ + pm->mcctrl &= ~AVR32_PM_MCCTRL_OSC1EN_MASK; +} + + +void pm_enable_clk1_no_wait(volatile avr32_pm_t *pm, unsigned int startup) +{ + // Read register + u_avr32_pm_oscctrl1_t u_avr32_pm_oscctrl1 = {pm->oscctrl1}; + // Modify + u_avr32_pm_oscctrl1.OSCCTRL1.startup = startup; + // Write back + pm->oscctrl1 = u_avr32_pm_oscctrl1.oscctrl1; + + pm->mcctrl |= AVR32_PM_MCCTRL_OSC1EN_MASK; +} + + +void pm_wait_for_clk1_ready(volatile avr32_pm_t *pm) +{ + while (!(pm->poscsr & AVR32_PM_POSCSR_OSC1RDY_MASK)); +} + + +/*! \brief Sets the mode of the 32-kHz oscillator. + * + * \param pm Base address of the Power Manager (i.e. &AVR32_PM). + * \param mode 32-kHz oscillator mode (i.e. AVR32_PM_OSCCTRL32_MODE_x). + */ +static void pm_set_osc32_mode(volatile avr32_pm_t *pm, unsigned int mode) +{ + // Read + u_avr32_pm_oscctrl32_t u_avr32_pm_oscctrl32 = {pm->oscctrl32}; + // Modify + u_avr32_pm_oscctrl32.OSCCTRL32.mode = mode; + // Write + pm->oscctrl32 = u_avr32_pm_oscctrl32.oscctrl32; +} + + +void pm_enable_osc32_ext_clock(volatile avr32_pm_t *pm) +{ + pm_set_osc32_mode(pm, AVR32_PM_OSCCTRL32_MODE_EXT_CLOCK); +} + + +void pm_enable_osc32_crystal(volatile avr32_pm_t *pm) +{ + pm_set_osc32_mode(pm, AVR32_PM_OSCCTRL32_MODE_CRYSTAL); +} + + +void pm_enable_clk32(volatile avr32_pm_t *pm, unsigned int startup) +{ + pm_enable_clk32_no_wait(pm, startup); + pm_wait_for_clk32_ready(pm); +} + + +void pm_disable_clk32(volatile avr32_pm_t *pm) +{ + pm->oscctrl32 &= ~AVR32_PM_OSCCTRL32_OSC32EN_MASK; +} + + +void pm_enable_clk32_no_wait(volatile avr32_pm_t *pm, unsigned int startup) +{ + // Read register + u_avr32_pm_oscctrl32_t u_avr32_pm_oscctrl32 = {pm->oscctrl32}; + // Modify + u_avr32_pm_oscctrl32.OSCCTRL32.osc32en = 1; + u_avr32_pm_oscctrl32.OSCCTRL32.startup = startup; + // Write back + pm->oscctrl32 = u_avr32_pm_oscctrl32.oscctrl32; +} + + +void pm_wait_for_clk32_ready(volatile avr32_pm_t *pm) +{ + while (!(pm->poscsr & AVR32_PM_POSCSR_OSC32RDY_MASK)); +} + + +void pm_cksel(volatile avr32_pm_t *pm, + unsigned int pbadiv, + unsigned int pbasel, + unsigned int pbbdiv, + unsigned int pbbsel, + unsigned int hsbdiv, + unsigned int hsbsel) +{ + u_avr32_pm_cksel_t u_avr32_pm_cksel = {0}; + + u_avr32_pm_cksel.CKSEL.cpusel = hsbsel; + u_avr32_pm_cksel.CKSEL.cpudiv = hsbdiv; + u_avr32_pm_cksel.CKSEL.hsbsel = hsbsel; + u_avr32_pm_cksel.CKSEL.hsbdiv = hsbdiv; + u_avr32_pm_cksel.CKSEL.pbasel = pbasel; + u_avr32_pm_cksel.CKSEL.pbadiv = pbadiv; + u_avr32_pm_cksel.CKSEL.pbbsel = pbbsel; + u_avr32_pm_cksel.CKSEL.pbbdiv = pbbdiv; + + pm->cksel = u_avr32_pm_cksel.cksel; + + // Wait for ckrdy bit and then clear it + while (!(pm->poscsr & AVR32_PM_POSCSR_CKRDY_MASK)); +} + + +void pm_gc_setup(volatile avr32_pm_t *pm, + unsigned int gc, + unsigned int osc_or_pll, // Use Osc (=0) or PLL (=1) + unsigned int pll_osc, // Sel Osc0/PLL0 or Osc1/PLL1 + unsigned int diven, + unsigned int div) +{ + u_avr32_pm_gcctrl_t u_avr32_pm_gcctrl = {0}; + + u_avr32_pm_gcctrl.GCCTRL.oscsel = pll_osc; + u_avr32_pm_gcctrl.GCCTRL.pllsel = osc_or_pll; + u_avr32_pm_gcctrl.GCCTRL.diven = diven; + u_avr32_pm_gcctrl.GCCTRL.div = div; + + pm->gcctrl[gc] = u_avr32_pm_gcctrl.gcctrl; +} + + +void pm_gc_enable(volatile avr32_pm_t *pm, + unsigned int gc) +{ + pm->gcctrl[gc] |= AVR32_PM_GCCTRL_CEN_MASK; +} + + +void pm_gc_disable(volatile avr32_pm_t *pm, + unsigned int gc) +{ + pm->gcctrl[gc] &= ~AVR32_PM_GCCTRL_CEN_MASK; +} + + +void pm_pll_setup(volatile avr32_pm_t *pm, + unsigned int pll, + unsigned int mul, + unsigned int div, + unsigned int osc, + unsigned int lockcount) +{ + u_avr32_pm_pll_t u_avr32_pm_pll = {0}; + + u_avr32_pm_pll.PLL.pllosc = osc; + u_avr32_pm_pll.PLL.plldiv = div; + u_avr32_pm_pll.PLL.pllmul = mul; + u_avr32_pm_pll.PLL.pllcount = lockcount; + + pm->pll[pll] = u_avr32_pm_pll.pll; +} + + +void pm_pll_set_option(volatile avr32_pm_t *pm, + unsigned int pll, + unsigned int pll_freq, + unsigned int pll_div2, + unsigned int pll_wbwdisable) +{ + u_avr32_pm_pll_t u_avr32_pm_pll = {pm->pll[pll]}; + u_avr32_pm_pll.PLL.pllopt = pll_freq | (pll_div2 << 1) | (pll_wbwdisable << 2); + pm->pll[pll] = u_avr32_pm_pll.pll; +} + + +unsigned int pm_pll_get_option(volatile avr32_pm_t *pm, + unsigned int pll) +{ + return (pm->pll[pll] & AVR32_PM_PLLOPT_MASK) >> AVR32_PM_PLLOPT_OFFSET; +} + + +void pm_pll_enable(volatile avr32_pm_t *pm, + unsigned int pll) +{ + pm->pll[pll] |= AVR32_PM_PLLEN_MASK; +} + + +void pm_pll_disable(volatile avr32_pm_t *pm, + unsigned int pll) +{ + pm->pll[pll] &= ~AVR32_PM_PLLEN_MASK; +} + + +void pm_wait_for_pll0_locked(volatile avr32_pm_t *pm) +{ + while (!(pm->poscsr & AVR32_PM_POSCSR_LOCK0_MASK)); +} + + +void pm_wait_for_pll1_locked(volatile avr32_pm_t *pm) +{ + while (!(pm->poscsr & AVR32_PM_POSCSR_LOCK1_MASK)); +} + + +void pm_switch_to_clock(volatile avr32_pm_t *pm, unsigned long clock) +{ + // Read + u_avr32_pm_mcctrl_t u_avr32_pm_mcctrl = {pm->mcctrl}; + // Modify + u_avr32_pm_mcctrl.MCCTRL.mcsel = clock; + // Write back + pm->mcctrl = u_avr32_pm_mcctrl.mcctrl; +} + + +void pm_switch_to_osc0(volatile avr32_pm_t *pm, unsigned int fosc0, unsigned int startup) +{ + pm_enable_osc0_crystal(pm, fosc0); // Enable the Osc0 in crystal mode + pm_enable_clk0(pm, startup); // Crystal startup time - This parameter is critical and depends on the characteristics of the crystal + pm_switch_to_clock(pm, AVR32_PM_MCSEL_OSC0); // Then switch main clock to Osc0 +} + + +void pm_bod_enable_irq(volatile avr32_pm_t *pm) +{ + pm->ier = AVR32_PM_IER_BODDET_MASK; +} + + +void pm_bod_disable_irq(volatile avr32_pm_t *pm) +{ + Bool global_interrupt_enabled = Is_global_interrupt_enabled(); + + if (global_interrupt_enabled) Disable_global_interrupt(); + pm->idr = AVR32_PM_IDR_BODDET_MASK; + pm->isr; + if (global_interrupt_enabled) Enable_global_interrupt(); +} + + +void pm_bod_clear_irq(volatile avr32_pm_t *pm) +{ + pm->icr = AVR32_PM_ICR_BODDET_MASK; +} + + +unsigned long pm_bod_get_irq_status(volatile avr32_pm_t *pm) +{ + return ((pm->isr & AVR32_PM_ISR_BODDET_MASK) != 0); +} + + +unsigned long pm_bod_get_irq_enable_bit(volatile avr32_pm_t *pm) +{ + return ((pm->imr & AVR32_PM_IMR_BODDET_MASK) != 0); +} + + +unsigned long pm_bod_get_level(volatile avr32_pm_t *pm) +{ + return (pm->bod & AVR32_PM_BOD_LEVEL_MASK) >> AVR32_PM_BOD_LEVEL_OFFSET; +} + + +unsigned long pm_read_gplp(volatile avr32_pm_t *pm, unsigned long gplp) +{ + return pm->gplp[gplp]; +} + + +void pm_write_gplp(volatile avr32_pm_t *pm, unsigned long gplp, unsigned long value) +{ + pm->gplp[gplp] = value; +} + + +long pm_enable_module(volatile avr32_pm_t *pm, unsigned long module) +{ + unsigned long domain = module>>5; + unsigned long *regptr = (unsigned long*)(&(pm->cpumask) + domain); + + // Implementation-specific shortcut: the ckMASK registers are contiguous and + // memory-mapped in that order: CPUMASK, HSBMASK, PBAMASK, PBBMASK. + + *regptr |= (1<<(module%32)); + + return PASS; +} + +long pm_disable_module(volatile avr32_pm_t *pm, unsigned long module) +{ + unsigned long domain = module>>5; + unsigned long *regptr = (unsigned long*)(&(pm->cpumask) + domain); + + // Implementation-specific shortcut: the ckMASK registers are contiguous and + // memory-mapped in that order: CPUMASK, HSBMASK, PBAMASK, PBBMASK. + + *regptr &= ~(1<<(module%32)); + + return PASS; +} diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/PM/pm.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/PM/pm.h new file mode 100644 index 0000000000..b244332d80 --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/PM/pm.h @@ -0,0 +1,493 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file has been prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief Power Manager driver. + * + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + *****************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef _PM_H_ +#define _PM_H_ + +#include +#include "compiler.h" +#include "preprocessor.h" + + +/*! \brief Sets the MCU in the specified sleep mode. + * + * \param mode Sleep mode: + * \arg \c AVR32_PM_SMODE_IDLE: Idle; + * \arg \c AVR32_PM_SMODE_FROZEN: Frozen; + * \arg \c AVR32_PM_SMODE_STANDBY: Standby; + * \arg \c AVR32_PM_SMODE_STOP: Stop; + * \arg \c AVR32_PM_SMODE_DEEP_STOP: DeepStop; + * \arg \c AVR32_PM_SMODE_STATIC: Static. + */ +#define SLEEP(mode) {__asm__ __volatile__ ("sleep "STRINGZ(mode));} + + +//! Input and output parameters when initializing PM clocks using pm_configure_clocks(). +typedef struct +{ + //! CPU frequency (input/output argument). + unsigned long cpu_f; + + //! PBA frequency (input/output argument). + unsigned long pba_f; + + //! Oscillator 0's external crystal(or external clock) frequency (board dependant) (input argument). + unsigned long osc0_f; + + //! Oscillator 0's external crystal(or external clock) startup time: AVR32_PM_OSCCTRL0_STARTUP_x_RCOSC (input argument). + unsigned long osc0_startup; +} pm_freq_param_t; + +#define PM_FREQ_STATUS_FAIL (-1) +#define PM_FREQ_STATUS_OK (0) + + +/*! \brief Gets the MCU reset cause. + * + * \param pm Base address of the Power Manager instance (i.e. &AVR32_PM). + * + * \return The MCU reset cause which can be masked with the + * \c AVR32_PM_RCAUSE_x_MASK bit-masks to isolate specific causes. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ unsigned int pm_get_reset_cause(volatile avr32_pm_t *pm) +{ + return pm->rcause; +} + + +/*! + * \brief This function will enable the external clock mode of the oscillator 0. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + */ +extern void pm_enable_osc0_ext_clock(volatile avr32_pm_t *pm); + + +/*! + * \brief This function will enable the crystal mode of the oscillator 0. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param fosc0 Oscillator 0 crystal frequency (Hz) + */ +extern void pm_enable_osc0_crystal(volatile avr32_pm_t *pm, unsigned int fosc0); + + +/*! + * \brief This function will enable the oscillator 0 to be used with a startup time. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param startup Clock 0 startup time. AVR32_PM_OSCCTRL0_STARTUP_x_RCOSC. + */ +extern void pm_enable_clk0(volatile avr32_pm_t *pm, unsigned int startup); + + +/*! + * \brief This function will disable the oscillator 0. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + */ +extern void pm_disable_clk0(volatile avr32_pm_t *pm); + + +/*! + * \brief This function will enable the oscillator 0 to be used with no startup time. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param startup Clock 0 startup time, for which the function does not wait. AVR32_PM_OSCCTRL0_STARTUP_x_RCOSC. + */ +extern void pm_enable_clk0_no_wait(volatile avr32_pm_t *pm, unsigned int startup); + + +/*! + * \brief This function will wait until the Osc0 clock is ready. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + */ +extern void pm_wait_for_clk0_ready(volatile avr32_pm_t *pm); + + +/*! + * \brief This function will enable the external clock mode of the oscillator 1. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + */ +extern void pm_enable_osc1_ext_clock(volatile avr32_pm_t *pm); + + +/*! + * \brief This function will enable the crystal mode of the oscillator 1. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param fosc1 Oscillator 1 crystal frequency (Hz) + */ +extern void pm_enable_osc1_crystal(volatile avr32_pm_t *pm, unsigned int fosc1); + + +/*! + * \brief This function will enable the oscillator 1 to be used with a startup time. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param startup Clock 1 startup time. AVR32_PM_OSCCTRL1_STARTUP_x_RCOSC. + */ +extern void pm_enable_clk1(volatile avr32_pm_t *pm, unsigned int startup); + + +/*! + * \brief This function will disable the oscillator 1. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + */ +extern void pm_disable_clk1(volatile avr32_pm_t *pm); + + +/*! + * \brief This function will enable the oscillator 1 to be used with no startup time. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param startup Clock 1 startup time, for which the function does not wait. AVR32_PM_OSCCTRL1_STARTUP_x_RCOSC. + */ +extern void pm_enable_clk1_no_wait(volatile avr32_pm_t *pm, unsigned int startup); + + +/*! + * \brief This function will wait until the Osc1 clock is ready. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + */ +extern void pm_wait_for_clk1_ready(volatile avr32_pm_t *pm); + + +/*! + * \brief This function will enable the external clock mode of the 32-kHz oscillator. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + */ +extern void pm_enable_osc32_ext_clock(volatile avr32_pm_t *pm); + + +/*! + * \brief This function will enable the crystal mode of the 32-kHz oscillator. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + */ +extern void pm_enable_osc32_crystal(volatile avr32_pm_t *pm); + + +/*! + * \brief This function will enable the oscillator 32 to be used with a startup time. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param startup Clock 32 kHz startup time. AVR32_PM_OSCCTRL32_STARTUP_x_RCOSC. + */ +extern void pm_enable_clk32(volatile avr32_pm_t *pm, unsigned int startup); + + +/*! + * \brief This function will disable the oscillator 32. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + */ +extern void pm_disable_clk32(volatile avr32_pm_t *pm); + + +/*! + * \brief This function will enable the oscillator 32 to be used with no startup time. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param startup Clock 32 kHz startup time, for which the function does not wait. AVR32_PM_OSCCTRL32_STARTUP_x_RCOSC. + */ +extern void pm_enable_clk32_no_wait(volatile avr32_pm_t *pm, unsigned int startup); + + +/*! + * \brief This function will wait until the osc32 clock is ready. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + */ +extern void pm_wait_for_clk32_ready(volatile avr32_pm_t *pm); + + +/*! + * \brief This function will select all the power manager clocks. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param pbadiv Peripheral Bus A clock divisor enable + * \param pbasel Peripheral Bus A select + * \param pbbdiv Peripheral Bus B clock divisor enable + * \param pbbsel Peripheral Bus B select + * \param hsbdiv High Speed Bus clock divisor enable (CPU clock = HSB clock) + * \param hsbsel High Speed Bus select (CPU clock = HSB clock ) + */ +extern void pm_cksel(volatile avr32_pm_t *pm, unsigned int pbadiv, unsigned int pbasel, unsigned int pbbdiv, unsigned int pbbsel, unsigned int hsbdiv, unsigned int hsbsel); + + +/*! + * \brief This function will setup a generic clock. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param gc generic clock number (0 for gc0...) + * \param osc_or_pll Use OSC (=0) or PLL (=1) + * \param pll_osc Select Osc0/PLL0 or Osc1/PLL1 + * \param diven Generic clock divisor enable + * \param div Generic clock divisor + */ +extern void pm_gc_setup(volatile avr32_pm_t *pm, unsigned int gc, unsigned int osc_or_pll, unsigned int pll_osc, unsigned int diven, unsigned int div); + + +/*! + * \brief This function will enable a generic clock. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param gc generic clock number (0 for gc0...) + */ +extern void pm_gc_enable(volatile avr32_pm_t *pm, unsigned int gc); + + +/*! + * \brief This function will disable a generic clock. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param gc generic clock number (0 for gc0...) + */ +extern void pm_gc_disable(volatile avr32_pm_t *pm, unsigned int gc); + + +/*! + * \brief This function will setup a PLL. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param pll PLL number(0 for PLL0, 1 for PLL1) + * \param mul PLL MUL in the PLL formula + * \param div PLL DIV in the PLL formula + * \param osc OSC number (0 for osc0, 1 for osc1) + * \param lockcount PLL lockount + */ +extern void pm_pll_setup(volatile avr32_pm_t *pm, unsigned int pll, unsigned int mul, unsigned int div, unsigned int osc, unsigned int lockcount); + + +/*! + * \brief This function will set a PLL option. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param pll PLL number(0 for PLL0, 1 for PLL1) + * \param pll_freq Set to 1 for VCO frequency range 80-180MHz, set to 0 for VCO frequency range 160-240Mhz. + * \param pll_div2 Divide the PLL output frequency by 2 (this settings does not change the FVCO value) + * \param pll_wbwdisable 1 Disable the Wide-Bandith Mode (Wide-Bandwith mode allow a faster startup time and out-of-lock time). 0 to enable the Wide-Bandith Mode. + */ +extern void pm_pll_set_option(volatile avr32_pm_t *pm, unsigned int pll, unsigned int pll_freq, unsigned int pll_div2, unsigned int pll_wbwdisable); + + +/*! + * \brief This function will get a PLL option. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param pll PLL number(0 for PLL0, 1 for PLL1) + * \return Option + */ +extern unsigned int pm_pll_get_option(volatile avr32_pm_t *pm, unsigned int pll); + + +/*! + * \brief This function will enable a PLL. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param pll PLL number(0 for PLL0, 1 for PLL1) + */ +extern void pm_pll_enable(volatile avr32_pm_t *pm, unsigned int pll); + + +/*! + * \brief This function will disable a PLL. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param pll PLL number(0 for PLL0, 1 for PLL1) + */ +extern void pm_pll_disable(volatile avr32_pm_t *pm, unsigned int pll); + + +/*! + * \brief This function will wait for PLL0 locked + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + */ +extern void pm_wait_for_pll0_locked(volatile avr32_pm_t *pm); + + +/*! + * \brief This function will wait for PLL1 locked + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + */ +extern void pm_wait_for_pll1_locked(volatile avr32_pm_t *pm); + + +/*! + * \brief This function will switch the power manager main clock. + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param clock Clock to be switched on. AVR32_PM_MCSEL_SLOW for RCOsc, AVR32_PM_MCSEL_OSC0 for Osc0, AVR32_PM_MCSEL_PLL0 for PLL0. + */ +extern void pm_switch_to_clock(volatile avr32_pm_t *pm, unsigned long clock); + + +/*! + * \brief Switch main clock to clock Osc0 (crystal mode) + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param fosc0 Oscillator 0 crystal frequency (Hz) + * \param startup Crystal 0 startup time. AVR32_PM_OSCCTRL0_STARTUP_x_RCOSC. + */ +extern void pm_switch_to_osc0(volatile avr32_pm_t *pm, unsigned int fosc0, unsigned int startup); + + +/*! \brief Enables the Brown-Out Detector interrupt. + * + * \param pm Base address of the Power Manager (i.e. &AVR32_PM). + */ +extern void pm_bod_enable_irq(volatile avr32_pm_t *pm); + + +/*! \brief Disables the Brown-Out Detector interrupt. + * + * \param pm Base address of the Power Manager (i.e. &AVR32_PM). + */ +extern void pm_bod_disable_irq(volatile avr32_pm_t *pm); + + +/*! \brief Clears the Brown-Out Detector interrupt flag. + * + * \param pm Base address of the Power Manager (i.e. &AVR32_PM). + */ +extern void pm_bod_clear_irq(volatile avr32_pm_t *pm); + + +/*! \brief Gets the Brown-Out Detector interrupt flag. + * + * \param pm Base address of the Power Manager (i.e. &AVR32_PM). + * + * \retval 0 No BOD interrupt. + * \retval 1 BOD interrupt pending. + */ +extern unsigned long pm_bod_get_irq_status(volatile avr32_pm_t *pm); + + +/*! \brief Gets the Brown-Out Detector interrupt enable status. + * + * \param pm Base address of the Power Manager (i.e. &AVR32_PM). + * + * \retval 0 BOD interrupt disabled. + * \retval 1 BOD interrupt enabled. + */ +extern unsigned long pm_bod_get_irq_enable_bit(volatile avr32_pm_t *pm); + + +/*! \brief Gets the triggering threshold of the Brown-Out Detector. + * + * \param pm Base address of the Power Manager (i.e. &AVR32_PM). + * + * \return Triggering threshold of the BOD. See the electrical characteristics + * in the part datasheet for actual voltage levels. + */ +extern unsigned long pm_bod_get_level(volatile avr32_pm_t *pm); + + +/*! + * \brief Read the content of the PM GPLP registers + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param gplp GPLP register index (0,1,... depending on the number of GPLP registers for a given part) + * + * \return The content of the chosen GPLP register. + */ +extern unsigned long pm_read_gplp(volatile avr32_pm_t *pm, unsigned long gplp); + + +/*! + * \brief Write into the PM GPLP registers + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param gplp GPLP register index (0,1,... depending on the number of GPLP registers for a given part) + * \param value Value to write + */ +extern void pm_write_gplp(volatile avr32_pm_t *pm, unsigned long gplp, unsigned long value); + + +/*! \brief Enable the clock of a module. + * + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param module The module to clock (use one of the defines in the part-specific + * header file under "toolchain folder"/avr32/inc(lude)/avr32/; depending on the + * clock domain, look for the sections "CPU clocks", "HSB clocks", "PBx clocks") + * + * \return Status. + * \retval 0 Success. + * \retval <0 An error occured. + */ +extern long pm_enable_module(volatile avr32_pm_t *pm, unsigned long module); + +/*! \brief Disable the clock of a module. + * + * \param pm Base address of the Power Manager (i.e. &AVR32_PM) + * \param module The module to shut down (use one of the defines in the part-specific + * header file under "toolchain folder"/avr32/inc(lude)/avr32/; depending on the + * clock domain, look for the sections "CPU clocks", "HSB clocks", "PBx clocks") + * + * \return Status. + * \retval 0 Success. + * \retval <0 An error occured. + */ +extern long pm_disable_module(volatile avr32_pm_t *pm, unsigned long module); + + + +/*! \brief Automatically configure the CPU, PBA, PBB, and HSB clocks + * according to the user wishes. + * + * This function needs some parameters stored in a pm_freq_param_t structure: + * - cpu_f and pba_f are the wanted frequencies, + * - osc0_f is the oscillator 0 on-board frequency (e.g. FOSC0), + * - osc0_startup is the oscillator 0 startup time (e.g. OSC0_STARTUP). + * + * The function will then configure the clocks using the following rules: + * - It first try to find a valid PLL frequency (the highest possible value to avoid jitter) in order + * to satisfy the CPU frequency, + * - It optimizes the configuration depending the various divide stages, + * - Then, the PBA frequency is configured from the CPU freq. + * - Note that HSB and PBB are configured with the same frequency as CPU. + * - Note also that the number of wait states of the flash read accesses is automatically set-up depending + * the CPU frequency. As a consequence, the application needs the FLASHC driver to compile. + * + * The CPU, HSB and PBA frequencies programmed after configuration are stored back into cpu_f and pba_f. + * + * \param param pointer on the configuration structure. + * + * \retval PM_FREQ_STATUS_OK Mode successfully initialized. + * \retval PM_FREQ_STATUS_FAIL The configuration can not be done. + */ +extern int pm_configure_clocks(pm_freq_param_t *param); + + +/*! \brief Automatically configure the USB clock. + * + * USB clock is configured to 48MHz, using the PLL1 from the Oscillator0, assuming + * a 12 MHz crystal is connected to it. + */ +extern void pm_configure_usb_clock(void); + + +#endif // _PM_H_ diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/PM/pm_conf_clocks.c b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/PM/pm_conf_clocks.c new file mode 100644 index 0000000000..9fd07e9727 --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/PM/pm_conf_clocks.c @@ -0,0 +1,268 @@ +/* This source file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file has been prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief Power Manager clocks configuration helper. + * + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + *****************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#include +#include "compiler.h" +#include "pm.h" + +extern void flashc_set_wait_state(unsigned int wait_state); +#if (defined AVR32_FLASHC_210_H_INCLUDED) +extern void flashc_issue_command(unsigned int command, int page_number); +#endif + + +#define PM_MAX_MUL ((1 << AVR32_PM_PLL0_PLLMUL_SIZE) - 1) + + +int pm_configure_clocks(pm_freq_param_t *param) +{ + // Supported frequencies: + // Fosc0 mul div PLL div2_en cpu_f pba_f Comment + // 12 15 1 192 1 12 12 + // 12 9 3 40 1 20 20 PLL out of spec + // 12 15 1 192 1 24 12 + // 12 9 1 120 1 30 15 + // 12 9 3 40 0 40 20 PLL out of spec + // 12 15 1 192 1 48 12 + // 12 15 1 192 1 48 24 + // 12 8 1 108 1 54 27 + // 12 9 1 120 1 60 15 + // 12 9 1 120 1 60 30 + // 12 10 1 132 1 66 16.5 + // + unsigned long in_cpu_f = param->cpu_f; + unsigned long in_osc0_f = param->osc0_f; + unsigned long mul, div, div2_en = 0, div2_cpu = 0, div2_pba = 0; + unsigned long pll_freq, rest; + Bool b_div2_pba, b_div2_cpu; + + // Switch to external Oscillator 0 + pm_switch_to_osc0(&AVR32_PM, in_osc0_f, param->osc0_startup); + + // Start with CPU freq config + if (in_cpu_f == in_osc0_f) + { + param->cpu_f = in_osc0_f; + param->pba_f = in_osc0_f; + return PM_FREQ_STATUS_OK; + } + else if (in_cpu_f < in_osc0_f) + { + // TBD + } + + rest = in_cpu_f % in_osc0_f; + + for (div = 1; div < 32; div++) + { + if ((div * rest) % in_osc0_f == 0) + break; + } + if (div == 32) + return PM_FREQ_STATUS_FAIL; + + mul = (in_cpu_f * div) / in_osc0_f; + + if (mul > PM_MAX_MUL) + return PM_FREQ_STATUS_FAIL; + + // export 2power from PLL div to div2_cpu + while (!(div % 2)) + { + div /= 2; + div2_cpu++; + } + + // Here we know the mul and div parameter of the PLL config. + // . Check out if the PLL has a valid in_cpu_f. + // . Try to have for the PLL frequency (VCO output) the highest possible value + // to reduce jitter. + while (in_osc0_f * 2 * mul / div < AVR32_PM_PLL_VCO_RANGE0_MAX_FREQ) + { + if (2 * mul > PM_MAX_MUL) + break; + mul *= 2; + div2_cpu++; + } + + if (div2_cpu != 0) + { + div2_cpu--; + div2_en = 1; + } + + pll_freq = in_osc0_f * mul / (div * (1 << div2_en)); + + // Update real CPU Frequency + param->cpu_f = pll_freq / (1 << div2_cpu); + mul--; + + pm_pll_setup(&AVR32_PM + , 0 // pll + , mul // mul + , div // div + , 0 // osc + , 16 // lockcount + ); + + pm_pll_set_option(&AVR32_PM + , 0 // pll + // PLL clock is lower than 160MHz: need to set pllopt. + , (pll_freq < AVR32_PM_PLL_VCO_RANGE0_MIN_FREQ) ? 1 : 0 // pll_freq + , div2_en // pll_div2 + , 0 // pll_wbwdisable + ); + + rest = pll_freq; + while (rest > AVR32_PM_PBA_MAX_FREQ || + rest != param->pba_f) + { + div2_pba++; + rest = pll_freq / (1 << div2_pba); + if (rest < param->pba_f) + break; + } + + // Update real PBA Frequency + param->pba_f = pll_freq / (1 << div2_pba); + + // Enable PLL0 + pm_pll_enable(&AVR32_PM, 0); + + // Wait for PLL0 locked + pm_wait_for_pll0_locked(&AVR32_PM); + + if (div2_cpu) + { + b_div2_cpu = TRUE; + div2_cpu--; + } + else + b_div2_cpu = FALSE; + + if (div2_pba) + { + b_div2_pba = TRUE; + div2_pba--; + } + else + b_div2_pba = FALSE; + + pm_cksel(&AVR32_PM + , b_div2_pba, div2_pba // PBA + , b_div2_cpu, div2_cpu // PBB + , b_div2_cpu, div2_cpu // HSB + ); + + if (param->cpu_f > AVR32_FLASHC_FWS_0_MAX_FREQ) + { + flashc_set_wait_state(1); +#if (defined AVR32_FLASHC_210_H_INCLUDED) + if (param->cpu_f > AVR32_FLASHC_HSEN_FWS_1_MAX_FREQ) + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_HSEN, -1); + else + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_HSDIS, -1); +#endif + } + else + { + flashc_set_wait_state(0); +#if (defined AVR32_FLASHC_210_H_INCLUDED) + if (param->cpu_f > AVR32_FLASHC_HSEN_FWS_0_MAX_FREQ) + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_HSEN, -1); + else + flashc_issue_command(AVR32_FLASHC_FCMD_CMD_HSDIS, -1); +#endif + } + + pm_switch_to_clock(&AVR32_PM, AVR32_PM_MCCTRL_MCSEL_PLL0); + + return PM_FREQ_STATUS_OK; +} + + +void pm_configure_usb_clock(void) +{ +#if UC3A3 + + // Setup USB GCLK. + pm_gc_setup(&AVR32_PM, AVR32_PM_GCLK_USBB, // gc + 0, // osc_or_pll: use Osc (if 0) or PLL (if 1) + 0, // pll_osc: select Osc0/PLL0 or Osc1/PLL1 + 0, // diven + 0); // div + + // Enable USB GCLK. + pm_gc_enable(&AVR32_PM, AVR32_PM_GCLK_USBB); +#else + // Use 12MHz from OSC0 and generate 96 MHz + pm_pll_setup(&AVR32_PM, 1, // pll. + 7, // mul. + 1, // div. + 0, // osc. + 16); // lockcount. + + pm_pll_set_option(&AVR32_PM, 1, // pll. + 1, // pll_freq: choose the range 80-180MHz. + 1, // pll_div2. + 0); // pll_wbwdisable. + + // start PLL1 and wait forl lock + pm_pll_enable(&AVR32_PM, 1); + + // Wait for PLL1 locked. + pm_wait_for_pll1_locked(&AVR32_PM); + + pm_gc_setup(&AVR32_PM, AVR32_PM_GCLK_USBB, // gc. + 1, // osc_or_pll: use Osc (if 0) or PLL (if 1). + 1, // pll_osc: select Osc0/PLL0 or Osc1/PLL1. + 0, // diven. + 0); // div. + pm_gc_enable(&AVR32_PM, AVR32_PM_GCLK_USBB); +#endif +} diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/PM/power_clocks_lib.c b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/PM/power_clocks_lib.c new file mode 100644 index 0000000000..3f549d62d3 --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/PM/power_clocks_lib.c @@ -0,0 +1,566 @@ +/* This source file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file has been prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief High-level library abstracting features such as oscillators/pll/dfll + * configuration, clock configuration, System-sensible parameters + * configuration, buses clocks configuration, sleep mode, reset. + * + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + *****************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ +#include "power_clocks_lib.h" + + +//! Device-specific data +#if UC3L +static long int pcl_configure_clocks_uc3l(pcl_freq_param_t *param); // FORWARD declaration +#endif + +#if UC3C +static long int pcl_configure_clocks_uc3c(pcl_freq_param_t *param); // FORWARD declaration +#endif + +long int pcl_configure_clocks(pcl_freq_param_t *param) +{ +#ifndef AVR32_PM_VERSION_RESETVALUE + // Implementation for UC3A, UC3A3, UC3B parts. + return(pm_configure_clocks(param)); +#else + #ifdef AVR32_PM_410_H_INCLUDED + // Implementation for UC3C parts. + return(pcl_configure_clocks_uc3c(param)); + #else + // Implementation for UC3L parts. + return(pcl_configure_clocks_uc3l(param)); + #endif +#endif +} + + +//! Device-specific implementation +#if UC3L +// FORWARD declaration +static long int pcl_configure_synchronous_clocks( pm_clk_src_t main_clk_src, + unsigned long main_clock_freq_hz, + pcl_freq_param_t *param); + +long int pcl_configure_clocks_rcsys(pcl_freq_param_t *param) +{ + // Supported main clock sources: PCL_MC_RCSYS + + // Supported synchronous clocks frequencies if RCSYS is the main clock source: + // 115200Hz, 57600Hz, 28800Hz, 14400Hz, 7200Hz, 3600Hz, 1800Hz, 900Hz, 450Hz. + + // NOTE: by default, this implementation doesn't perform thorough checks on the + // input parameters. To enable the checks, define AVR32SFW_INPUT_CHECK. + +#ifdef AVR32SFW_INPUT_CHECK + // Verify that fCPU >= fPBx + if((param->cpu_f < param->pba_f) || (param->cpu_f < param->pbb_f)) + return(-1); +#endif + +#ifdef AVR32SFW_INPUT_CHECK + // Verify that the target frequencies are reachable. + if((param->cpu_f > SCIF_SLOWCLOCK_FREQ_HZ) || (param->pba_f > SCIF_SLOWCLOCK_FREQ_HZ) + || (param->pbb_f > SCIF_SLOWCLOCK_FREQ_HZ)) + return(-1); +#endif + + return(pcl_configure_synchronous_clocks(PM_CLK_SRC_SLOW, SCIF_SLOWCLOCK_FREQ_HZ, param)); +} + + +long int pcl_configure_clocks_rc120m(pcl_freq_param_t *param) +{ + // Supported main clock sources: PCL_MC_RC120M + + // Supported synchronous clocks frequencies if RC120M is the main clock source: + // 30MHz, 15MHz, 7.5MHz, 3.75MHz, 1.875MHz, 937.5kHz, 468.75kHz. + + // NOTE: by default, this implementation doesn't perform thorough checks on the + // input parameters. To enable the checks, define AVR32SFW_INPUT_CHECK. + +#ifdef AVR32SFW_INPUT_CHECK + // Verify that fCPU >= fPBx + if((param->cpu_f < param->pba_f) || (param->cpu_f < param->pbb_f)) + return(-1); +#endif + +#ifdef AVR32SFW_INPUT_CHECK + // Verify that the target frequencies are reachable. + if((param->cpu_f > SCIF_RC120M_FREQ_HZ) || (param->pba_f > SCIF_RC120M_FREQ_HZ) + || (param->pbb_f > SCIF_RC120M_FREQ_HZ)) + return(-1); +#endif + + // Start the 120MHz internal RCosc (RC120M) clock + scif_start_rc120M(); + + return(pcl_configure_synchronous_clocks(PM_CLK_SRC_RC120M, SCIF_RC120M_FREQ_HZ, param)); +} + + +long int pcl_configure_clocks_osc0(pcl_freq_param_t *param) +{ + // Supported main clock sources: PCL_MC_OSC0 + + // Supported synchronous clocks frequencies if OSC0 is the main clock source: + // (these obviously depend on the OSC0 frequency; we'll take 16MHz as an example) + // 16MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500kHz, 250kHz, 125kHz, 62.5kHz. + + // NOTE: by default, this implementation doesn't perform thorough checks on the + // input parameters. To enable the checks, define AVR32SFW_INPUT_CHECK. + + unsigned long main_clock_freq; + + +#ifdef AVR32SFW_INPUT_CHECK + // Verify that fCPU >= fPBx + if((param->cpu_f < param->pba_f) || (param->cpu_f < param->pbb_f)) + return(-1); +#endif + + main_clock_freq = param->osc0_f; +#ifdef AVR32SFW_INPUT_CHECK + // Verify that the target frequencies are reachable. + if((param->cpu_f > main_clock_freq) || (param->pba_f > main_clock_freq) + || (param->pbb_f > main_clock_freq)) + return(-1); +#endif + // Configure OSC0 in crystal mode, external crystal with a fcrystal Hz frequency. + scif_configure_osc_crystalmode(SCIF_OSC0, main_clock_freq); + // Enable the OSC0 + scif_enable_osc(SCIF_OSC0, param->osc0_startup, true); + + return(pcl_configure_synchronous_clocks(PM_CLK_SRC_OSC0, main_clock_freq, param)); +} + + +long int pcl_configure_clocks_dfll0(pcl_freq_param_t *param) +{ + // Supported main clock sources: PCL_MC_DFLL + + // Supported synchronous clocks frequencies if DFLL is the main clock source: + // (these obviously depend on the DFLL target frequency; we'll take 100MHz as an example) + // 50MHz, 25MHz, 12.5MHz, 6.25MHz, 3.125MHz, 1562.5kHz, 781.25kHz, 390.625kHz. + + // NOTE: by default, this implementation doesn't perform thorough checks on the + // input parameters. To enable the checks, define AVR32SFW_INPUT_CHECK. + + unsigned long main_clock_freq; + scif_gclk_opt_t *pgc_dfllif_ref_opt; + + +#ifdef AVR32SFW_INPUT_CHECK + // Verify that fCPU >= fPBx + if((param->cpu_f < param->pba_f) || (param->cpu_f < param->pbb_f)) + return(-1); +#endif + + main_clock_freq = param->dfll_f; +#ifdef AVR32SFW_INPUT_CHECK + // Verify that the target DFLL output frequency is in the correct range. + if((main_clock_freq > SCIF_DFLL_MAXFREQ_HZ) || (main_clock_freq < SCIF_DFLL_MINFREQ_HZ)) + return(-1); + // Verify that the target frequencies are reachable. + if((param->cpu_f > main_clock_freq) || (param->pba_f > main_clock_freq) + || (param->pbb_f > main_clock_freq)) + return(-1); +#endif + pgc_dfllif_ref_opt = (scif_gclk_opt_t *)param->pextra_params; + // Implementation note: this implementation configures the DFLL in closed-loop + // mode (because it gives the best accuracy) which enables the generic clock CLK_DFLLIF_REF + // as a reference (RCSYS being used as the generic clock source, undivided). + scif_dfll0_closedloop_configure_and_start(pgc_dfllif_ref_opt, main_clock_freq, TRUE); + + return(pcl_configure_synchronous_clocks(PM_CLK_SRC_DFLL0, main_clock_freq, param)); +} + + +static long int pcl_configure_clocks_uc3l(pcl_freq_param_t *param) +{ + // Supported main clock sources: PCL_MC_RCSYS, PCL_MC_OSC0, PCL_MC_DFLL0, PCL_MC_RC120M + + // Supported synchronous clocks frequencies if RCSYS is the main clock source: + // 115200Hz, 57600Hz, 28800Hz, 14400Hz, 7200Hz, 3600Hz, 1800Hz, 900Hz, 450Hz. + + // Supported synchronous clocks frequencies if RC120M is the main clock source: + // 30MHz, 15MHz, 7.5MHz, 3.75MHz, 1.875MHz, 937.5kHz, 468.75kHz. + + // Supported synchronous clocks frequencies if OSC0 is the main clock source: + // (these obviously depend on the OSC0 frequency; we'll take 16MHz as an example) + // 16MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500kHz, 250kHz, 125kHz, 62.5kHz. + + // Supported synchronous clocks frequencies if DFLL is the main clock source: + // (these obviously depend on the DFLL target frequency; we'll take 100MHz as an example) + // 50MHz, 25MHz, 12.5MHz, 6.25MHz, 3.125MHz, 1562.5kHz, 781.25kHz, 390.625kHz. + + // NOTE: by default, this implementation doesn't perform thorough checks on the + // input parameters. To enable the checks, define AVR32SFW_INPUT_CHECK. + + +#ifdef AVR32SFW_INPUT_CHECK + // Verify that fCPU >= fPBx + if((param->cpu_f < param->pba_f) || (param->cpu_f < param->pbb_f)) + return(-1); +#endif + + if(PCL_MC_RCSYS == param->main_clk_src) + { + return(pcl_configure_clocks_rcsys(param)); + } + else if(PCL_MC_RC120M == param->main_clk_src) + { + return(pcl_configure_clocks_rc120m(param)); + } + else if(PCL_MC_OSC0 == param->main_clk_src) + { + return(pcl_configure_clocks_osc0(param)); + } + else // PCL_MC_DFLL0 == param->main_clk_src + { + return(pcl_configure_clocks_dfll0(param)); + } +} + +static long int pcl_configure_synchronous_clocks(pm_clk_src_t main_clk_src, unsigned long main_clock_freq_hz, pcl_freq_param_t *param) +{ + //# + //# Set the Synchronous clock division ratio for each clock domain + //# + pm_set_all_cksel(main_clock_freq_hz, param->cpu_f, param->pba_f, param->pbb_f); + + //# + //# Set the Flash wait state and the speed read mode (depending on the target CPU frequency). + //# +#if UC3L + flashcdw_set_flash_waitstate_and_readmode(param->cpu_f); +#elif UC3C + flashc_set_flash_waitstate_and_readmode(param->cpu_f); +#endif + + + //# + //# Switch the main clock source to the selected clock. + //# + pm_set_mclk_source(main_clk_src); + + return PASS; +} + +#endif // UC3L device-specific implementation + +//! UC3C Device-specific implementation +#if UC3C +static long int pcl_configure_clocks_uc3c(pcl_freq_param_t *param) +{ + #define PM_MAX_MUL ((1 << AVR32_SCIF_PLLMUL_SIZE) - 1) + #define AVR32_PM_PBA_MAX_FREQ 66000000 + #define AVR32_PM_PLL_VCO_RANGE0_MAX_FREQ 240000000 + #define AVR32_PM_PLL_VCO_RANGE0_MIN_FREQ 160000000 + + // Implementation for UC3C parts. + // Supported frequencies: + // Fosc0 mul div PLL div2_en cpu_f pba_f Comment + // 12 15 1 192 1 12 12 + // 12 9 3 40 1 20 20 PLL out of spec + // 12 15 1 192 1 24 12 + // 12 9 1 120 1 30 15 + // 12 9 3 40 0 40 20 PLL out of spec + // 12 15 1 192 1 48 12 + // 12 15 1 192 1 48 24 + // 12 8 1 108 1 54 27 + // 12 9 1 120 1 60 15 + // 12 9 1 120 1 60 30 + // 12 10 1 132 1 66 16.5 + // + unsigned long in_cpu_f = param->cpu_f; + unsigned long in_osc0_f = param->osc0_f; + unsigned long mul, div, div2_en = 0, div2_cpu = 0, div2_pba = 0; + unsigned long pll_freq, rest; + Bool b_div2_pba, b_div2_cpu; + + // Configure OSC0 in crystal mode, external crystal with a FOSC0 Hz frequency. + scif_configure_osc_crystalmode(SCIF_OSC0, in_osc0_f); + // Enable the OSC0 + scif_enable_osc(SCIF_OSC0, param->osc0_startup, true); + // Set the main clock source as being OSC0. + pm_set_mclk_source(PM_CLK_SRC_OSC0); + + // Start with CPU freq config + if (in_cpu_f == in_osc0_f) + { + param->cpu_f = in_osc0_f; + param->pba_f = in_osc0_f; + return PASS; + } + else if (in_cpu_f < in_osc0_f) + { + // TBD + } + + rest = in_cpu_f % in_osc0_f; + + for (div = 1; div < 32; div++) + { + if ((div * rest) % in_osc0_f == 0) + break; + } + if (div == 32) + return FAIL; + + mul = (in_cpu_f * div) / in_osc0_f; + + if (mul > PM_MAX_MUL) + return FAIL; + + // export 2power from PLL div to div2_cpu + while (!(div % 2)) + { + div /= 2; + div2_cpu++; + } + + // Here we know the mul and div parameter of the PLL config. + // . Check out if the PLL has a valid in_cpu_f. + // . Try to have for the PLL frequency (VCO output) the highest possible value + // to reduce jitter. + while (in_osc0_f * 2 * mul / div < AVR32_PM_PLL_VCO_RANGE0_MAX_FREQ) + { + if (2 * mul > PM_MAX_MUL) + break; + mul *= 2; + div2_cpu++; + } + + if (div2_cpu != 0) + { + div2_cpu--; + div2_en = 1; + } + + pll_freq = in_osc0_f * mul / (div * (1 << div2_en)); + + // Update real CPU Frequency + param->cpu_f = pll_freq / (1 << div2_cpu); + mul--; + + scif_pll_opt_t opt; + + opt.osc = SCIF_OSC0, // Sel Osc0 or Osc1 + opt.lockcount = 16, // lockcount in main clock for the PLL wait lock + opt.div = div, // DIV=1 in the formula + opt.mul = mul, // MUL=7 in the formula + opt.pll_div2 = div2_en, // pll_div2 Divide the PLL output frequency by 2 (this settings does not change the FVCO value) + opt.pll_wbwdisable = 0, //pll_wbwdisable 1 Disable the Wide-Bandith Mode (Wide-Bandwith mode allow a faster startup time and out-of-lock time). 0 to enable the Wide-Bandith Mode. + opt.pll_freq = (pll_freq < AVR32_PM_PLL_VCO_RANGE0_MIN_FREQ) ? 1 : 0, // Set to 1 for VCO frequency range 80-180MHz, set to 0 for VCO frequency range 160-240Mhz. + + + scif_pll_setup(SCIF_PLL0, opt); // lockcount in main clock for the PLL wait lock + + /* Enable PLL0 */ + scif_pll_enable(SCIF_PLL0); + + /* Wait for PLL0 locked */ + scif_wait_for_pll_locked(SCIF_PLL0) ; + + rest = pll_freq; + while (rest > AVR32_PM_PBA_MAX_FREQ || + rest != param->pba_f) + { + div2_pba++; + rest = pll_freq / (1 << div2_pba); + if (rest < param->pba_f) + break; + } + + // Update real PBA Frequency + param->pba_f = pll_freq / (1 << div2_pba); + + + if (div2_cpu) + { + b_div2_cpu = TRUE; + div2_cpu--; + } + else + b_div2_cpu = FALSE; + + if (div2_pba) + { + b_div2_pba = TRUE; + div2_pba--; + } + else + b_div2_pba = FALSE; + + if (b_div2_cpu == TRUE ) + { + pm_set_clk_domain_div(PM_CLK_DOMAIN_0, (pm_divratio_t) div2_cpu); // CPU + pm_set_clk_domain_div(PM_CLK_DOMAIN_1, (pm_divratio_t) div2_cpu); // HSB + pm_set_clk_domain_div(PM_CLK_DOMAIN_3, (pm_divratio_t) div2_cpu); // PBB + } + if (b_div2_pba == TRUE ) + { + pm_set_clk_domain_div(PM_CLK_DOMAIN_2, (pm_divratio_t) div2_pba); // PBA + pm_set_clk_domain_div(PM_CLK_DOMAIN_4, (pm_divratio_t) div2_pba); // PBC + } + + // Set Flashc Wait State + flashc_set_flash_waitstate_and_readmode(param->cpu_f); + + // Set the main clock source as being PLL0. + pm_set_mclk_source(PM_CLK_SRC_PLL0); + + return PASS; +} +#endif // UC3C device-specific implementation + +long int pcl_switch_to_osc(pcl_osc_t osc, unsigned int fcrystal, unsigned int startup) +{ +#ifndef AVR32_PM_VERSION_RESETVALUE +// Implementation for UC3A, UC3A3, UC3B parts. + if(PCL_OSC0 == osc) + { + // Configure OSC0 in crystal mode, external crystal with a FOSC0 Hz frequency, + // enable the OSC0, set the main clock source as being OSC0. + pm_switch_to_osc0(&AVR32_PM, fcrystal, startup); + } + else + { + return PCL_NOT_SUPPORTED; + } +#else +// Implementation for UC3C, UC3L parts. + #if AVR32_PM_VERSION_RESETVALUE < 0x400 + return PCL_NOT_SUPPORTED; + #else + if(PCL_OSC0 == osc) + { + // Configure OSC0 in crystal mode, external crystal with a fcrystal Hz frequency. + scif_configure_osc_crystalmode(SCIF_OSC0, fcrystal); + // Enable the OSC0 + scif_enable_osc(SCIF_OSC0, startup, true); + // Set the Flash wait state and the speed read mode (depending on the target CPU frequency). +#if UC3L + flashcdw_set_flash_waitstate_and_readmode(fcrystal); +#elif UC3C + flashc_set_flash_waitstate_and_readmode(fcrystal); +#endif + // Set the main clock source as being OSC0. + pm_set_mclk_source(PM_CLK_SRC_OSC0); + } + else + { + return PCL_NOT_SUPPORTED; + } + #endif +#endif + return PASS; +} + +long int pcl_configure_usb_clock(void) +{ +#ifndef AVR32_PM_VERSION_RESETVALUE +// Implementation for UC3A, UC3A3, UC3B parts. + pm_configure_usb_clock(); + return PASS; +#else + #ifdef AVR32_PM_410_H_INCLUDED + const scif_pll_opt_t opt = { + .osc = SCIF_OSC0, // Sel Osc0 or Osc1 + .lockcount = 16, // lockcount in main clock for the PLL wait lock + .div = 1, // DIV=1 in the formula + .mul = 5, // MUL=7 in the formula + .pll_div2 = 1, // pll_div2 Divide the PLL output frequency by 2 (this settings does not change the FVCO value) + .pll_wbwdisable = 0, //pll_wbwdisable 1 Disable the Wide-Bandith Mode (Wide-Bandwith mode allow a faster startup time and out-of-lock time). 0 to enable the Wide-Bandith Mode. + .pll_freq = 1, // Set to 1 for VCO frequency range 80-180MHz, set to 0 for VCO frequency range 160-240Mhz. + }; + + /* Setup PLL1 on Osc0, mul=7 ,no divisor, lockcount=16, ie. 16Mhzx6 = 96MHz output */ + scif_pll_setup(SCIF_PLL1, opt); // lockcount in main clock for the PLL wait lock + + /* Enable PLL1 */ + scif_pll_enable(SCIF_PLL1); + + /* Wait for PLL1 locked */ + scif_wait_for_pll_locked(SCIF_PLL1) ; + + // Implementation for UC3C parts. + // Setup the generic clock for USB + scif_gc_setup(AVR32_SCIF_GCLK_USB, + SCIF_GCCTRL_PLL1, + AVR32_SCIF_GC_NO_DIV_CLOCK, + 0); + // Now enable the generic clock + scif_gc_enable(AVR32_SCIF_GCLK_USB); + return PASS; + #else + return PCL_NOT_SUPPORTED; + #endif +#endif +} + + +#if UC3L +#else +void pcl_write_gplp(unsigned long gplp, unsigned long value) +{ +#ifndef AVR32_PM_VERSION_RESETVALUE +// Implementation for UC3A, UC3A3, UC3B parts. + pm_write_gplp(&AVR32_PM,gplp,value); +#else + scif_write_gplp(gplp,value); +#endif +} + +unsigned long pcl_read_gplp(unsigned long gplp) +{ +#ifndef AVR32_PM_VERSION_RESETVALUE +// Implementation for UC3A, UC3A3, UC3B parts. + return pm_read_gplp(&AVR32_PM,gplp); +#else + return scif_read_gplp(gplp); +#endif +} +#endif diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/PM/power_clocks_lib.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/PM/power_clocks_lib.h new file mode 100644 index 0000000000..76617171ae --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/PM/power_clocks_lib.h @@ -0,0 +1,379 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file has been prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief High-level library abstracting features such as oscillators/pll/dfll + * configuration, clock configuration, System-sensible parameters + * configuration, buses clocks configuration, sleep mode, reset. + * + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + *****************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef _POWER_CLOCKS_LIB_H_ +#define _POWER_CLOCKS_LIB_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#include +#include "compiler.h" + +#ifndef AVR32_PM_VERSION_RESETVALUE +// Support for UC3A, UC3A3, UC3B parts. + #include "pm.h" +#else +//! Device-specific data +#if UC3L + #include "pm_uc3l.h" + #include "scif_uc3l.h" + #include "flashcdw.h" +#elif UC3C + #include "pm_uc3c.h" + #include "scif_uc3c.h" + #include "flashc.h" +#endif +#endif + +/*! \name Clocks Management + */ +//! @{ + +//! The different oscillators +typedef enum +{ + PCL_OSC0 = 0, + PCL_OSC1 = 1 +} pcl_osc_t; + +//! The different DFLLs +typedef enum +{ + PCL_DFLL0 = 0, + PCL_DFLL1 = 1 +} pcl_dfll_t; + +//! Possible Main Clock Sources +typedef enum +{ + PCL_MC_RCSYS, // Default main clock source, supported by all (aka Slow Clock) + PCL_MC_OSC0, // Supported by all + PCL_MC_OSC1, // Supported by UC3C only + PCL_MC_OSC0_PLL0, // Supported by UC3A, UC3B, UC3A3, UC3C (the main clock source is PLL0 with OSC0 as reference) + PCL_MC_OSC1_PLL0, // Supported by UC3A, UC3B, UC3A3, UC3C (the main clock source is PLL0 with OSC1 as reference) + PCL_MC_OSC0_PLL1, // Supported by UC3C (the main clock source is PLL1 with OSC0 as reference) + PCL_MC_OSC1_PLL1, // Supported by UC3C (the main clock source is PLL1 with OSC1 as reference) + PCL_MC_DFLL0, // Supported by UC3L + PCL_MC_DFLL1, // Not supported yet + PCL_MC_RC120M, // Supported by UC3L, UC3C + PCL_MC_RC8M, // Supported by UC3C + PCL_MC_CRIPOSC // Supported by UC3C +} pcl_mainclk_t; + +//! Input and output parameters to configure clocks with pcl_configure_clocks(). +// NOTE: regarding the frequency settings, always abide by the datasheet rules and min & max supported frequencies. +#ifndef AVR32_PM_VERSION_RESETVALUE +// Support for UC3A, UC3A3, UC3B parts. +#define pcl_freq_param_t pm_freq_param_t // See pm.h +#else +// Support for UC3C, UC3L parts. +typedef struct +{ + //! Main clock source selection (input argument). + pcl_mainclk_t main_clk_src; + + //! Target CPU frequency (input/output argument). + unsigned long cpu_f; + + //! Target PBA frequency (input/output argument). + unsigned long pba_f; + + //! Target PBB frequency (input/output argument). + unsigned long pbb_f; + + //! Target PBC frequency (input/output argument). + unsigned long pbc_f; + + //! Oscillator 0's external crystal(or external clock) frequency (board dependant) (input argument). + unsigned long osc0_f; + + //! Oscillator 0's external crystal(or external clock) startup time: AVR32_PM_OSCCTRL0_STARTUP_x_RCOSC (input argument). + unsigned long osc0_startup; + + //! DFLL target frequency (input/output argument) (NOTE: the bigger, the most stable the frequency) + unsigned long dfll_f; + + //! Other parameters that might be necessary depending on the device (implementation-dependent). + // For the UC3L DFLL setup, this parameter should be pointing to a structure of + // type (scif_gclk_opt_t *). + void *pextra_params; +} pcl_freq_param_t; +#endif + +//! Define "not supported" for the lib. +#define PCL_NOT_SUPPORTED (-10000) + +/*! \brief Automatically configure the CPU, PBA, PBB, and HSB clocks + * + * This function needs some parameters stored in a pcl_freq_param_t structure: + * - main_clk_src is the id of the main clock source to use, + * - cpu_f and pba_f and pbb_f are the wanted frequencies, + * - osc0_f is the oscillator 0's external crystal (or external clock) on-board frequency (e.g. FOSC0), + * - osc0_startup is the oscillator 0's external crystal (or external clock) startup time (e.g. OSC0_STARTUP). + * - dfll_f is the target DFLL frequency to set-up if main_clk_src is the dfll. + * + * The CPU, HSB and PBA frequencies programmed after configuration are stored back into cpu_f and pba_f. + * + * \note: since it is dynamically computing the appropriate field values of the + * configuration registers from the parameters structure, this function is not + * optimal in terms of code size. For a code size optimal solution, it is better + * to create a new function from pcl_configure_clocks() and modify it to use + * preprocessor computation from pre-defined target frequencies. + * + * \param param pointer on the configuration structure. + * + * \retval 0 Success. + * \retval <0 The configuration cannot be performed. + */ +extern long int pcl_configure_clocks(pcl_freq_param_t *param); + +/*! \brief Automatically configure the CPU, PBA, PBB, and HSB clocks using the RCSYS osc as main source clock. + * + * This function needs some parameters stored in a pcl_freq_param_t structure: + * - cpu_f and pba_f and pbb_f are the wanted frequencies + * + * Supported main clock sources: PCL_MC_RCSYS + * + * Supported synchronous clocks frequencies: + * 115200Hz, 57600Hz, 28800Hz, 14400Hz, 7200Hz, 3600Hz, 1800Hz, 900Hz, 450Hz. + * + * \note: by default, this implementation doesn't perform thorough checks on the + * input parameters. To enable the checks, define AVR32SFW_INPUT_CHECK. + * + * \note: since it is dynamically computing the appropriate field values of the + * configuration registers from the parameters structure, this function is not + * optimal in terms of code size. For a code size optimal solution, it is better + * to create a new function from pcl_configure_clocks_rcsys() and modify it to use + * preprocessor computation from pre-defined target frequencies. + * + * \param param pointer on the configuration structure. + * + * \retval 0 Success. + * \retval <0 The configuration cannot be performed. + */ +extern long int pcl_configure_clocks_rcsys(pcl_freq_param_t *param); + +/*! \brief Automatically configure the CPU, PBA, PBB, and HSB clocks using the RC120M osc as main source clock. + * + * This function needs some parameters stored in a pcl_freq_param_t structure: + * - cpu_f and pba_f and pbb_f are the wanted frequencies + * + * Supported main clock sources: PCL_MC_RC120M + * + * Supported synchronous clocks frequencies: + * 30MHz, 15MHz, 7.5MHz, 3.75MHz, 1.875MHz, 937.5kHz, 468.75kHz. + * + * \note: by default, this implementation doesn't perform thorough checks on the + * input parameters. To enable the checks, define AVR32SFW_INPUT_CHECK. + * + * \note: since it is dynamically computing the appropriate field values of the + * configuration registers from the parameters structure, this function is not + * optimal in terms of code size. For a code size optimal solution, it is better + * to create a new function from pcl_configure_clocks_rc120m() and modify it to + * use preprocessor computation from pre-defined target frequencies. + * + * \param param pointer on the configuration structure. + * + * \retval 0 Success. + * \retval <0 The configuration cannot be performed. + */ +extern long int pcl_configure_clocks_rc120m(pcl_freq_param_t *param); + +/*! \brief Automatically configure the CPU, PBA, PBB, and HSB clocks using the OSC0 osc as main source clock + * + * This function needs some parameters stored in a pcl_freq_param_t structure: + * - cpu_f and pba_f and pbb_f are the wanted frequencies, + * - osc0_f is the oscillator 0's external crystal (or external clock) on-board frequency (e.g. FOSC0), + * - osc0_startup is the oscillator 0's external crystal (or external clock) startup time (e.g. OSC0_STARTUP). + * + * Supported main clock sources: PCL_MC_OSC0 + * + * Supported synchronous clocks frequencies: + * (these obviously depend on the OSC0 frequency; we'll take 16MHz as an example) + * 16MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500kHz, 250kHz, 125kHz, 62.5kHz. + * + * \note: by default, this implementation doesn't perform thorough checks on the + * input parameters. To enable the checks, define AVR32SFW_INPUT_CHECK. + * + * \note: since it is dynamically computing the appropriate field values of the + * configuration registers from the parameters structure, this function is not + * optimal in terms of code size. For a code size optimal solution, it is better + * to create a new function from pcl_configure_clocks_osc0() and modify it to use + * preprocessor computation from pre-defined target frequencies. + * + * \param param pointer on the configuration structure. + * + * \retval 0 Success. + * \retval <0 The configuration cannot be performed. + */ +extern long int pcl_configure_clocks_osc0(pcl_freq_param_t *param); + +/*! \brief Automatically configure the CPU, PBA, PBB, and HSB clocks using the DFLL0 as main source clock + * + * This function needs some parameters stored in a pcl_freq_param_t structure: + * - cpu_f and pba_f and pbb_f are the wanted frequencies, + * - dfll_f is the target DFLL frequency to set-up + * + * \note: when the DFLL0 is to be used as main source clock for the synchronous clocks, + * the target frequency of the DFLL should be chosen to be as high as possible + * within the specification range (for stability reasons); the target cpu and pbx + * frequencies will then be reached by appropriate division ratio. + * + * Supported main clock sources: PCL_MC_DFLL0 + * + * Supported synchronous clocks frequencies: + * (these obviously depend on the DFLL target frequency; we'll take 100MHz as an example) + * 50MHz, 25MHz, 12.5MHz, 6.25MHz, 3.125MHz, 1562.5kHz, 781.25kHz, 390.625kHz. + * + * \note: by default, this implementation doesn't perform thorough checks on the + * input parameters. To enable the checks, define AVR32SFW_INPUT_CHECK. + * + * \note: since it is dynamically computing the appropriate field values of the + * configuration registers from the parameters structure, this function is not + * optimal in terms of code size. For a code size optimal solution, it is better + * to create a new function from pcl_configure_clocks_dfll0() and modify it to + * use preprocessor computation from pre-defined target frequencies. + * + * \param param pointer on the configuration structure. + * + * \retval 0 Success. + * \retval <0 The configuration cannot be performed. + */ +extern long int pcl_configure_clocks_dfll0(pcl_freq_param_t *param); + +/*! \brief Switch the main clock source to Osc0 configured in crystal mode + * + * \param osc The oscillator to enable and switch to. + * \param fcrystal Oscillator external crystal frequency (Hz) + * \param startup Oscillator startup time. + * + * \return Status. + * \retval 0 Success. + * \retval <0 An error occured. + */ +extern long int pcl_switch_to_osc(pcl_osc_t osc, unsigned int fcrystal, unsigned int startup); + +/*! \brief Enable the clock of a module. + * + * \param module The module to clock (use one of the defines in the part-specific + * header file under "toolchain folder"/avr32/inc(lude)/avr32/; depending on the + * clock domain, look for the sections "CPU clocks", "HSB clocks", "PBx clocks" + * or look in the module section). + * + * \return Status. + * \retval 0 Success. + * \retval <0 An error occured. + */ +#ifndef AVR32_PM_VERSION_RESETVALUE +// Implementation for UC3A, UC3A3, UC3B parts. +#define pcl_enable_module(module) pm_enable_module(&AVR32_PM, module) +#else +// Implementation for UC3C, UC3L parts. +#define pcl_enable_module(module) pm_enable_module(module) +#endif + +/*! \brief Disable the clock of a module. + * + * \param module The module to shut down (use one of the defines in the part-specific + * header file under "toolchain folder"/avr32/inc(lude)/avr32/; depending on the + * clock domain, look for the sections "CPU clocks", "HSB clocks", "PBx clocks" + * or look in the module section). + * + * \return Status. + * \retval 0 Success. + * \retval <0 An error occured. + */ +#ifndef AVR32_PM_VERSION_RESETVALUE +// Implementation for UC3A, UC3A3, UC3B parts. +#define pcl_disable_module(module) pm_disable_module(&AVR32_PM, module) +#else +// Implementation for UC3C, UC3L parts. +#define pcl_disable_module(module) pm_disable_module(module) +#endif + +/*! \brief Configure the USB Clock + * + * + * \return Status. + * \retval 0 Success. + * \retval <0 An error occured. + */ +extern long int pcl_configure_usb_clock(void); + +//! @} + +/*! \name Power Management + */ +//! @{ +/*! + * \brief Read the content of the GPLP registers + * \param gplp GPLP register index (0,1,... depending on the number of GPLP registers for a given part) + * + * \return The content of the chosen GPLP register. + */ +extern unsigned long pcl_read_gplp(unsigned long gplp); + + +/*! + * \brief Write into the GPLP registers + * \param gplp GPLP register index (0,1,... depending on the number of GPLP registers for a given part) + * \param value Value to write + */ +extern void pcl_write_gplp(unsigned long gplp, unsigned long value); + +//! @} + +#ifdef __cplusplus +} +#endif + +#endif // _POWER_CLOCKS_LIB_H_ diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/USART/usart.c b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/USART/usart.c new file mode 100644 index 0000000000..bfdc977792 --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/USART/usart.c @@ -0,0 +1,914 @@ +/* This source file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief USART driver for AVR32 UC3. + * + * This file contains basic functions for the AVR32 USART, with support for all + * modes, settings and clock speeds. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices with a USART module can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#include "compiler.h" +#include "usart.h" + + +//------------------------------------------------------------------------------ +/*! \name Private Functions + */ +//! @{ + + +/*! \brief Checks if the USART is in multidrop mode. + * + * \param usart Base address of the USART instance. + * + * \return \c 1 if the USART is in multidrop mode, otherwise \c 0. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +static __inline__ int usart_mode_is_multidrop(volatile avr32_usart_t *usart) +{ + return ((usart->mr >> AVR32_USART_MR_PAR_OFFSET) & AVR32_USART_MR_PAR_MULTI) == AVR32_USART_MR_PAR_MULTI; +} + + +/*! \brief Calculates a clock divider (\e CD) and a fractional part (\e FP) for + * the USART asynchronous modes to generate a baud rate as close as + * possible to the baud rate set point. + * + * Baud rate calculation: + * \f$ Baudrate = \frac{SelectedClock}{Over \times (CD + \frac{FP}{8})} \f$, \e Over being 16 or 8. + * The maximal oversampling is selected if it allows to generate a baud rate close to the set point. + * + * \param usart Base address of the USART instance. + * \param baudrate Baud rate set point. + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * + * \retval USART_SUCCESS Baud rate successfully initialized. + * \retval USART_INVALID_INPUT Baud rate set point is out of range for the given input clock frequency. + */ +static int usart_set_async_baudrate(volatile avr32_usart_t *usart, unsigned int baudrate, unsigned long pba_hz) +{ + unsigned int over = (pba_hz >= 16 * baudrate) ? 16 : 8; + unsigned int cd_fp = ((1 << AVR32_USART_BRGR_FP_SIZE) * pba_hz + (over * baudrate) / 2) / (over * baudrate); + unsigned int cd = cd_fp >> AVR32_USART_BRGR_FP_SIZE; + unsigned int fp = cd_fp & ((1 << AVR32_USART_BRGR_FP_SIZE) - 1); + + if (cd < 1 || cd > (1 << AVR32_USART_BRGR_CD_SIZE) - 1) + return USART_INVALID_INPUT; + + usart->mr = (usart->mr & ~(AVR32_USART_MR_USCLKS_MASK | + AVR32_USART_MR_SYNC_MASK | + AVR32_USART_MR_OVER_MASK)) | + AVR32_USART_MR_USCLKS_MCK << AVR32_USART_MR_USCLKS_OFFSET | + ((over == 16) ? AVR32_USART_MR_OVER_X16 : AVR32_USART_MR_OVER_X8) << AVR32_USART_MR_OVER_OFFSET; + + usart->brgr = cd << AVR32_USART_BRGR_CD_OFFSET | + fp << AVR32_USART_BRGR_FP_OFFSET; + + return USART_SUCCESS; +} + + +/*! \brief Calculates a clock divider (\e CD) for the USART synchronous master + * modes to generate a baud rate as close as possible to the baud rate + * set point. + * + * Baud rate calculation: + * \f$ Baudrate = \frac{SelectedClock}{CD} \f$. + * + * \param usart Base address of the USART instance. + * \param baudrate Baud rate set point. + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * + * \retval USART_SUCCESS Baud rate successfully initialized. + * \retval USART_INVALID_INPUT Baud rate set point is out of range for the given input clock frequency. + */ +static int usart_set_sync_master_baudrate(volatile avr32_usart_t *usart, unsigned int baudrate, unsigned long pba_hz) +{ + unsigned int cd = (pba_hz + baudrate / 2) / baudrate; + + if (cd < 1 || cd > (1 << AVR32_USART_BRGR_CD_SIZE) - 1) + return USART_INVALID_INPUT; + + usart->mr = (usart->mr & ~AVR32_USART_MR_USCLKS_MASK) | + AVR32_USART_MR_USCLKS_MCK << AVR32_USART_MR_USCLKS_OFFSET | + AVR32_USART_MR_SYNC_MASK; + + usart->brgr = cd << AVR32_USART_BRGR_CD_OFFSET; + + return USART_SUCCESS; +} + + +/*! \brief Selects the SCK pin as the source of baud rate for the USART + * synchronous slave modes. + * + * \param usart Base address of the USART instance. + * + * \retval USART_SUCCESS Baud rate successfully initialized. + */ +static int usart_set_sync_slave_baudrate(volatile avr32_usart_t *usart) +{ + usart->mr = (usart->mr & ~AVR32_USART_MR_USCLKS_MASK) | + AVR32_USART_MR_USCLKS_SCK << AVR32_USART_MR_USCLKS_OFFSET | + AVR32_USART_MR_SYNC_MASK; + + return USART_SUCCESS; +} + + +/*! \brief Calculates a clock divider (\e CD) for the USART ISO7816 mode to + * generate an ISO7816 clock as close as possible to the clock set point. + * + * ISO7816 clock calculation: + * \f$ Clock = \frac{SelectedClock}{CD} \f$. + * + * \param usart Base address of the USART instance. + * \param clock ISO7816 clock set point. + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * + * \retval USART_SUCCESS ISO7816 clock successfully initialized. + * \retval USART_INVALID_INPUT ISO7816 clock set point is out of range for the given input clock frequency. + */ +static int usart_set_iso7816_clock(volatile avr32_usart_t *usart, unsigned int clock, unsigned long pba_hz) +{ + unsigned int cd = (pba_hz + clock / 2) / clock; + + if (cd < 1 || cd > (1 << AVR32_USART_BRGR_CD_SIZE) - 1) + return USART_INVALID_INPUT; + + usart->mr = (usart->mr & ~(AVR32_USART_MR_USCLKS_MASK | + AVR32_USART_MR_SYNC_MASK | + AVR32_USART_MR_OVER_MASK)) | + AVR32_USART_MR_USCLKS_MCK << AVR32_USART_MR_USCLKS_OFFSET | + AVR32_USART_MR_OVER_X16 << AVR32_USART_MR_OVER_OFFSET; + + usart->brgr = cd << AVR32_USART_BRGR_CD_OFFSET; + + return USART_SUCCESS; +} + + +#if defined(AVR32_USART_400_H_INCLUDED) || \ + defined(AVR32_USART_410_H_INCLUDED) || \ + defined(AVR32_USART_420_H_INCLUDED) || \ + defined(AVR32_USART_440_H_INCLUDED) || \ + defined(AVR32_USART_602_H_INCLUDED) + + +/*! \brief Calculates a clock divider (\e CD) for the USART SPI master mode to + * generate a baud rate as close as possible to the baud rate set point. + * + * Baud rate calculation: + * \f$ Baudrate = \frac{SelectedClock}{CD} \f$. + * + * \param usart Base address of the USART instance. + * \param baudrate Baud rate set point. + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * + * \retval USART_SUCCESS Baud rate successfully initialized. + * \retval USART_INVALID_INPUT Baud rate set point is out of range for the given input clock frequency. + */ +static int usart_set_spi_master_baudrate(volatile avr32_usart_t *usart, unsigned int baudrate, unsigned long pba_hz) +{ + unsigned int cd = (pba_hz + baudrate / 2) / baudrate; + + if (cd < 4 || cd > (1 << AVR32_USART_BRGR_CD_SIZE) - 1) + return USART_INVALID_INPUT; + + usart->mr = (usart->mr & ~AVR32_USART_MR_USCLKS_MASK) | + AVR32_USART_MR_USCLKS_MCK << AVR32_USART_MR_USCLKS_OFFSET; + + usart->brgr = cd << AVR32_USART_BRGR_CD_OFFSET; + + return USART_SUCCESS; +} + + +/*! \brief Selects the SCK pin as the source of baud rate for the USART SPI + * slave mode. + * + * \param usart Base address of the USART instance. + * + * \retval USART_SUCCESS Baud rate successfully initialized. + */ +static int usart_set_spi_slave_baudrate(volatile avr32_usart_t *usart) +{ + usart->mr = (usart->mr & ~AVR32_USART_MR_USCLKS_MASK) | + AVR32_USART_MR_USCLKS_SCK << AVR32_USART_MR_USCLKS_OFFSET; + + return USART_SUCCESS; +} + + +#endif // USART rev. >= 4.0.0 + + +//! @} + + +//------------------------------------------------------------------------------ +/*! \name Initialization Functions + */ +//! @{ + + +void usart_reset(volatile avr32_usart_t *usart) +{ + Bool global_interrupt_enabled = Is_global_interrupt_enabled(); + + // Disable all USART interrupts. + // Interrupts needed should be set explicitly on every reset. + if (global_interrupt_enabled) Disable_global_interrupt(); + usart->idr = 0xFFFFFFFF; + usart->csr; + if (global_interrupt_enabled) Enable_global_interrupt(); + + // Reset mode and other registers that could cause unpredictable behavior after reset. + usart->mr = 0; + usart->rtor = 0; + usart->ttgr = 0; + + // Shutdown TX and RX (will be re-enabled when setup has successfully completed), + // reset status bits and turn off DTR and RTS. + usart->cr = AVR32_USART_CR_RSTRX_MASK | + AVR32_USART_CR_RSTTX_MASK | + AVR32_USART_CR_RSTSTA_MASK | + AVR32_USART_CR_RSTIT_MASK | + AVR32_USART_CR_RSTNACK_MASK | +#ifndef AVR32_USART_440_H_INCLUDED +// Note: Modem Signal Management DTR-DSR-DCD-RI are not included in USART rev.440. + AVR32_USART_CR_DTRDIS_MASK | +#endif + AVR32_USART_CR_RTSDIS_MASK; +} + + +int usart_init_rs232(volatile avr32_usart_t *usart, const usart_options_t *opt, long pba_hz) +{ + // Reset the USART and shutdown TX and RX. + usart_reset(usart); + + // Check input values. + if (!opt || // Null pointer. + opt->charlength < 5 || opt->charlength > 9 || + opt->paritytype > 7 || + opt->stopbits > 2 + 255 || + opt->channelmode > 3 || + usart_set_async_baudrate(usart, opt->baudrate, pba_hz) == USART_INVALID_INPUT) + return USART_INVALID_INPUT; + + if (opt->charlength == 9) + { + // Character length set to 9 bits. MODE9 dominates CHRL. + usart->mr |= AVR32_USART_MR_MODE9_MASK; + } + else + { + // CHRL gives the character length (- 5) when MODE9 = 0. + usart->mr |= (opt->charlength - 5) << AVR32_USART_MR_CHRL_OFFSET; + } + + usart->mr |= opt->paritytype << AVR32_USART_MR_PAR_OFFSET | + opt->channelmode << AVR32_USART_MR_CHMODE_OFFSET; + + if (opt->stopbits > USART_2_STOPBITS) + { + // Set two stop bits + usart->mr |= AVR32_USART_MR_NBSTOP_2 << AVR32_USART_MR_NBSTOP_OFFSET; + // and a timeguard period gives the rest. + usart->ttgr = opt->stopbits - USART_2_STOPBITS; + } + else + // Insert 1, 1.5 or 2 stop bits. + usart->mr |= opt->stopbits << AVR32_USART_MR_NBSTOP_OFFSET; + + // Set normal mode. + usart->mr = (usart->mr & ~AVR32_USART_MR_MODE_MASK) | + AVR32_USART_MR_MODE_NORMAL << AVR32_USART_MR_MODE_OFFSET; + + // Setup complete; enable communication. + // Enable input and output. + usart->cr = AVR32_USART_CR_RXEN_MASK | + AVR32_USART_CR_TXEN_MASK; + + return USART_SUCCESS; +} + + +int usart_init_rs232_tx_only(volatile avr32_usart_t *usart, const usart_options_t *opt, long pba_hz) +{ + // Reset the USART and shutdown TX and RX. + usart_reset(usart); + + // Check input values. + if (!opt || // Null pointer. + opt->charlength < 5 || opt->charlength > 9 || + opt->paritytype > 7 || + opt->stopbits == 1 || opt->stopbits > 2 + 255 || + opt->channelmode > 3 || + usart_set_sync_master_baudrate(usart, opt->baudrate, pba_hz) == USART_INVALID_INPUT) + return USART_INVALID_INPUT; + + if (opt->charlength == 9) + { + // Character length set to 9 bits. MODE9 dominates CHRL. + usart->mr |= AVR32_USART_MR_MODE9_MASK; + } + else + { + // CHRL gives the character length (- 5) when MODE9 = 0. + usart->mr |= (opt->charlength - 5) << AVR32_USART_MR_CHRL_OFFSET; + } + + usart->mr |= opt->paritytype << AVR32_USART_MR_PAR_OFFSET | + opt->channelmode << AVR32_USART_MR_CHMODE_OFFSET; + + if (opt->stopbits > USART_2_STOPBITS) + { + // Set two stop bits + usart->mr |= AVR32_USART_MR_NBSTOP_2 << AVR32_USART_MR_NBSTOP_OFFSET; + // and a timeguard period gives the rest. + usart->ttgr = opt->stopbits - USART_2_STOPBITS; + } + else + // Insert 1 or 2 stop bits. + usart->mr |= opt->stopbits << AVR32_USART_MR_NBSTOP_OFFSET; + + // Set normal mode. + usart->mr = (usart->mr & ~AVR32_USART_MR_MODE_MASK) | + AVR32_USART_MR_MODE_NORMAL << AVR32_USART_MR_MODE_OFFSET; + + // Setup complete; enable communication. + // Enable only output as input is not possible in synchronous mode without + // transferring clock. + usart->cr = AVR32_USART_CR_TXEN_MASK; + + return USART_SUCCESS; +} + + +int usart_init_hw_handshaking(volatile avr32_usart_t *usart, const usart_options_t *opt, long pba_hz) +{ + // First: Setup standard RS232. + if (usart_init_rs232(usart, opt, pba_hz) == USART_INVALID_INPUT) + return USART_INVALID_INPUT; + + // Set hardware handshaking mode. + usart->mr = (usart->mr & ~AVR32_USART_MR_MODE_MASK) | + AVR32_USART_MR_MODE_HARDWARE << AVR32_USART_MR_MODE_OFFSET; + + return USART_SUCCESS; +} + + +int usart_init_modem(volatile avr32_usart_t *usart, const usart_options_t *opt, long pba_hz) +{ + // First: Setup standard RS232. + if (usart_init_rs232(usart, opt, pba_hz) == USART_INVALID_INPUT) + return USART_INVALID_INPUT; + + // Set modem mode. + usart->mr = (usart->mr & ~AVR32_USART_MR_MODE_MASK) | + AVR32_USART_MR_MODE_MODEM << AVR32_USART_MR_MODE_OFFSET; + + return USART_SUCCESS; +} + + +int usart_init_sync_master(volatile avr32_usart_t *usart, const usart_options_t *opt, long pba_hz) +{ + // Reset the USART and shutdown TX and RX. + usart_reset(usart); + + // Check input values. + if (!opt || // Null pointer. + opt->charlength < 5 || opt->charlength > 9 || + opt->paritytype > 7 || + opt->stopbits == 1 || opt->stopbits > 2 + 255 || + opt->channelmode > 3 || + usart_set_sync_master_baudrate(usart, opt->baudrate, pba_hz) == USART_INVALID_INPUT) + return USART_INVALID_INPUT; + + if (opt->charlength == 9) + { + // Character length set to 9 bits. MODE9 dominates CHRL. + usart->mr |= AVR32_USART_MR_MODE9_MASK; + } + else + { + // CHRL gives the character length (- 5) when MODE9 = 0. + usart->mr |= (opt->charlength - 5) << AVR32_USART_MR_CHRL_OFFSET; + } + + usart->mr |= opt->paritytype << AVR32_USART_MR_PAR_OFFSET | + opt->channelmode << AVR32_USART_MR_CHMODE_OFFSET; + + if (opt->stopbits > USART_2_STOPBITS) + { + // Set two stop bits + usart->mr |= AVR32_USART_MR_NBSTOP_2 << AVR32_USART_MR_NBSTOP_OFFSET; + // and a timeguard period gives the rest. + usart->ttgr = opt->stopbits - USART_2_STOPBITS; + } + else + // Insert 1 or 2 stop bits. + usart->mr |= opt->stopbits << AVR32_USART_MR_NBSTOP_OFFSET; + + // Set normal mode. + usart->mr = (usart->mr & ~AVR32_USART_MR_MODE_MASK) | + AVR32_USART_MR_MODE_NORMAL << AVR32_USART_MR_MODE_OFFSET | + AVR32_USART_MR_CLKO_MASK; + + // Setup complete; enable communication. + // Enable input and output. + usart->cr = AVR32_USART_CR_RXEN_MASK | + AVR32_USART_CR_TXEN_MASK; + + return USART_SUCCESS; +} + + +int usart_init_sync_slave(volatile avr32_usart_t *usart, const usart_options_t *opt, long pba_hz) +{ + // Reset the USART and shutdown TX and RX. + usart_reset(usart); + + // Check input values. + if (!opt || // Null pointer. + opt->charlength < 5 || opt->charlength > 9 || + opt->paritytype > 7 || + opt->stopbits == 1 || opt->stopbits > 2 + 255 || + opt->channelmode > 3 || + usart_set_sync_slave_baudrate(usart) == USART_INVALID_INPUT) + return USART_INVALID_INPUT; + + if (opt->charlength == 9) + { + // Character length set to 9 bits. MODE9 dominates CHRL. + usart->mr |= AVR32_USART_MR_MODE9_MASK; + } + else + { + // CHRL gives the character length (- 5) when MODE9 = 0. + usart->mr |= (opt->charlength - 5) << AVR32_USART_MR_CHRL_OFFSET; + } + + usart->mr |= opt->paritytype << AVR32_USART_MR_PAR_OFFSET | + opt->channelmode << AVR32_USART_MR_CHMODE_OFFSET; + + if (opt->stopbits > USART_2_STOPBITS) + { + // Set two stop bits + usart->mr |= AVR32_USART_MR_NBSTOP_2 << AVR32_USART_MR_NBSTOP_OFFSET; + // and a timeguard period gives the rest. + usart->ttgr = opt->stopbits - USART_2_STOPBITS; + } + else + // Insert 1 or 2 stop bits. + usart->mr |= opt->stopbits << AVR32_USART_MR_NBSTOP_OFFSET; + + // Set normal mode. + usart->mr = (usart->mr & ~AVR32_USART_MR_MODE_MASK) | + AVR32_USART_MR_MODE_NORMAL << AVR32_USART_MR_MODE_OFFSET; + + // Setup complete; enable communication. + // Enable input and output. + usart->cr = AVR32_USART_CR_RXEN_MASK | + AVR32_USART_CR_TXEN_MASK; + + return USART_SUCCESS; +} + + +int usart_init_rs485(volatile avr32_usart_t *usart, const usart_options_t *opt, long pba_hz) +{ + // First: Setup standard RS232. + if (usart_init_rs232(usart, opt, pba_hz) == USART_INVALID_INPUT) + return USART_INVALID_INPUT; + + // Set RS485 mode. + usart->mr = (usart->mr & ~AVR32_USART_MR_MODE_MASK) | + AVR32_USART_MR_MODE_RS485 << AVR32_USART_MR_MODE_OFFSET; + + return USART_SUCCESS; +} + + +int usart_init_IrDA(volatile avr32_usart_t *usart, const usart_options_t *opt, + long pba_hz, unsigned char irda_filter) +{ + // First: Setup standard RS232. + if (usart_init_rs232(usart, opt, pba_hz) == USART_INVALID_INPUT) + return USART_INVALID_INPUT; + + // Set IrDA filter. + usart->ifr = irda_filter; + + // Set IrDA mode and activate filtering of input. + usart->mr = (usart->mr & ~AVR32_USART_MR_MODE_MASK) | + AVR32_USART_MODE_IRDA << AVR32_USART_MR_MODE_OFFSET | + AVR32_USART_MR_FILTER_MASK; + + return USART_SUCCESS; +} + + +int usart_init_iso7816(volatile avr32_usart_t *usart, const usart_iso7816_options_t *opt, int t, long pba_hz) +{ + // Reset the USART and shutdown TX and RX. + usart_reset(usart); + + // Check input values. + if (!opt || // Null pointer. + opt->paritytype > 1) + return USART_INVALID_INPUT; + + if (t == 0) + { + // Set USART mode to ISO7816, T=0. + // The T=0 protocol always uses 2 stop bits. + usart->mr = AVR32_USART_MR_MODE_ISO7816_T0 << AVR32_USART_MR_MODE_OFFSET | + AVR32_USART_MR_NBSTOP_2 << AVR32_USART_MR_NBSTOP_OFFSET | + opt->bit_order << AVR32_USART_MR_MSBF_OFFSET; // Allow MSBF in T=0. + } + else if (t == 1) + { + // Only LSB first in the T=1 protocol. + // max_iterations field is only used in T=0 mode. + if (opt->bit_order != 0 || + opt->max_iterations != 0) + return USART_INVALID_INPUT; + + // Set USART mode to ISO7816, T=1. + // The T=1 protocol always uses 1 stop bit. + usart->mr = AVR32_USART_MR_MODE_ISO7816_T1 << AVR32_USART_MR_MODE_OFFSET | + AVR32_USART_MR_NBSTOP_1 << AVR32_USART_MR_NBSTOP_OFFSET; + } + else + return USART_INVALID_INPUT; + + if (usart_set_iso7816_clock(usart, opt->iso7816_hz, pba_hz) == USART_INVALID_INPUT) + return USART_INVALID_INPUT; + + // Set FIDI register: bit rate = selected clock/FI_DI_ratio/16. + usart->fidi = opt->fidi_ratio; + + // Set ISO7816 spesific options in the MODE register. + usart->mr |= opt->paritytype << AVR32_USART_MR_PAR_OFFSET | + AVR32_USART_MR_CLKO_MASK | // Enable clock output. + opt->inhibit_nack << AVR32_USART_MR_INACK_OFFSET | + opt->dis_suc_nack << AVR32_USART_MR_DSNACK_OFFSET | + opt->max_iterations << AVR32_USART_MR_MAX_ITERATION_OFFSET; + + // Setup complete; enable the receiver by default. + usart_iso7816_enable_receiver(usart); + + return USART_SUCCESS; +} + + +#if defined(AVR32_USART_400_H_INCLUDED) || \ + defined(AVR32_USART_410_H_INCLUDED) || \ + defined(AVR32_USART_420_H_INCLUDED) || \ + defined(AVR32_USART_440_H_INCLUDED) || \ + defined(AVR32_USART_602_H_INCLUDED) + + +int usart_init_lin_master(volatile avr32_usart_t *usart, unsigned long baudrate, long pba_hz) +{ + // Reset the USART and shutdown TX and RX. + usart_reset(usart); + + // Check input values. + if (usart_set_async_baudrate(usart, baudrate, pba_hz) == USART_INVALID_INPUT) + return USART_INVALID_INPUT; + + usart->mr |= AVR32_USART_MR_MODE_LIN_MASTER << AVR32_USART_MR_MODE_OFFSET; // LIN master mode. + + // Setup complete; enable communication. + // Enable input and output. + usart->cr = AVR32_USART_CR_RXEN_MASK | + AVR32_USART_CR_TXEN_MASK; + + return USART_SUCCESS; +} + + +int usart_init_lin_slave(volatile avr32_usart_t *usart, unsigned long baudrate, long pba_hz) +{ + // Reset the USART and shutdown TX and RX. + usart_reset(usart); + + // Check input values. + if (usart_set_async_baudrate(usart, baudrate, pba_hz) == USART_INVALID_INPUT) + return USART_INVALID_INPUT; + + usart->mr |= AVR32_USART_MR_MODE_LIN_SLAVE << AVR32_USART_MR_MODE_OFFSET; // LIN slave mode. + + // Setup complete; enable communication. + // Enable input and output. + usart->cr = AVR32_USART_CR_RXEN_MASK | + AVR32_USART_CR_TXEN_MASK; + + return USART_SUCCESS; +} + + +int usart_init_spi_master(volatile avr32_usart_t *usart, const usart_spi_options_t *opt, long pba_hz) +{ + // Reset the USART and shutdown TX and RX. + usart_reset(usart); + + // Check input values. + if (!opt || // Null pointer. + opt->charlength < 5 || opt->charlength > 9 || + opt->spimode > 3 || + opt->channelmode > 3 || + usart_set_spi_master_baudrate(usart, opt->baudrate, pba_hz) == USART_INVALID_INPUT) + return USART_INVALID_INPUT; + + if (opt->charlength == 9) + { + // Character length set to 9 bits. MODE9 dominates CHRL. + usart->mr |= AVR32_USART_MR_MODE9_MASK; + } + else + { + // CHRL gives the character length (- 5) when MODE9 = 0. + usart->mr |= (opt->charlength - 5) << AVR32_USART_MR_CHRL_OFFSET; + } + + usart->mr |= AVR32_USART_MR_MODE_SPI_MASTER << AVR32_USART_MR_MODE_OFFSET | // SPI master mode. + ((opt->spimode & 0x1) ^ 0x1) << AVR32_USART_MR_SYNC_OFFSET | // SPI clock phase. + opt->channelmode << AVR32_USART_MR_CHMODE_OFFSET | // Channel mode. + (opt->spimode >> 1) << AVR32_USART_MR_MSBF_OFFSET | // SPI clock polarity. + AVR32_USART_MR_CLKO_MASK; // Drive SCK pin. + + // Setup complete; enable communication. + // Enable input and output. + usart->cr = AVR32_USART_CR_RXEN_MASK | + AVR32_USART_CR_TXEN_MASK; + + return USART_SUCCESS; +} + + +int usart_init_spi_slave(volatile avr32_usart_t *usart, const usart_spi_options_t *opt, long pba_hz) +{ + // Reset the USART and shutdown TX and RX. + usart_reset(usart); + + // Check input values. + if (!opt || // Null pointer. + opt->charlength < 5 || opt->charlength > 9 || + opt->spimode > 3 || + opt->channelmode > 3 || + usart_set_spi_slave_baudrate(usart) == USART_INVALID_INPUT) + return USART_INVALID_INPUT; + + if (opt->charlength == 9) + { + // Character length set to 9 bits. MODE9 dominates CHRL. + usart->mr |= AVR32_USART_MR_MODE9_MASK; + } + else + { + // CHRL gives the character length (- 5) when MODE9 = 0. + usart->mr |= (opt->charlength - 5) << AVR32_USART_MR_CHRL_OFFSET; + } + + usart->mr |= AVR32_USART_MR_MODE_SPI_SLAVE << AVR32_USART_MR_MODE_OFFSET | // SPI slave mode. + ((opt->spimode & 0x1) ^ 0x1) << AVR32_USART_MR_SYNC_OFFSET | // SPI clock phase. + opt->channelmode << AVR32_USART_MR_CHMODE_OFFSET | // Channel mode. + (opt->spimode >> 1) << AVR32_USART_MR_MSBF_OFFSET; // SPI clock polarity. + + // Setup complete; enable communication. + // Enable input and output. + usart->cr = AVR32_USART_CR_RXEN_MASK | + AVR32_USART_CR_TXEN_MASK; + + return USART_SUCCESS; +} + + +#endif // USART rev. >= 4.0.0 + + +//! @} + + +//------------------------------------------------------------------------------ +#if defined(AVR32_USART_400_H_INCLUDED) || \ + defined(AVR32_USART_410_H_INCLUDED) || \ + defined(AVR32_USART_420_H_INCLUDED) || \ + defined(AVR32_USART_440_H_INCLUDED) || \ + defined(AVR32_USART_602_H_INCLUDED) + + +/*! \name SPI Control Functions + */ +//! @{ + + +int usart_spi_selectChip(volatile avr32_usart_t *usart) +{ + // Force the SPI chip select. + usart->cr = AVR32_USART_CR_RTSEN_MASK; + + return USART_SUCCESS; +} + + +int usart_spi_unselectChip(volatile avr32_usart_t *usart) +{ + int timeout = USART_DEFAULT_TIMEOUT; + + do + { + if (!timeout--) return USART_FAILURE; + } while (!usart_tx_empty(usart)); + + // Release the SPI chip select. + usart->cr = AVR32_USART_CR_RTSDIS_MASK; + + return USART_SUCCESS; +} + + +//! @} + + +#endif // USART rev. >= 4.0.0 + + +//------------------------------------------------------------------------------ +/*! \name Transmit/Receive Functions + */ +//! @{ + + +int usart_send_address(volatile avr32_usart_t *usart, int address) +{ + // Check if USART is in multidrop / RS485 mode. + if (!usart_mode_is_multidrop(usart)) return USART_MODE_FAULT; + + // Prepare to send an address. + usart->cr = AVR32_USART_CR_SENDA_MASK; + + // Write the address to TX. + usart_bw_write_char(usart, address); + + return USART_SUCCESS; +} + + +int usart_write_char(volatile avr32_usart_t *usart, int c) +{ + if (usart_tx_ready(usart)) + { + usart->thr = (c << AVR32_USART_THR_TXCHR_OFFSET) & AVR32_USART_THR_TXCHR_MASK; + return USART_SUCCESS; + } + else + return USART_TX_BUSY; +} + + +int usart_putchar(volatile avr32_usart_t *usart, int c) +{ + int timeout = USART_DEFAULT_TIMEOUT; + + if (c == '\n') + { + do + { + if (!timeout--) return USART_FAILURE; + } while (usart_write_char(usart, '\r') != USART_SUCCESS); + + timeout = USART_DEFAULT_TIMEOUT; + } + + do + { + if (!timeout--) return USART_FAILURE; + } while (usart_write_char(usart, c) != USART_SUCCESS); + + return USART_SUCCESS; +} + + +int usart_read_char(volatile avr32_usart_t *usart, int *c) +{ + // Check for errors: frame, parity and overrun. In RS485 mode, a parity error + // would mean that an address char has been received. + if (usart->csr & (AVR32_USART_CSR_OVRE_MASK | + AVR32_USART_CSR_FRAME_MASK | + AVR32_USART_CSR_PARE_MASK)) + return USART_RX_ERROR; + + // No error; if we really did receive a char, read it and return SUCCESS. + if (usart_test_hit(usart)) + { + *c = (usart->rhr & AVR32_USART_RHR_RXCHR_MASK) >> AVR32_USART_RHR_RXCHR_OFFSET; + return USART_SUCCESS; + } + else + return USART_RX_EMPTY; +} + + +int usart_getchar(volatile avr32_usart_t *usart) +{ + int c, ret; + + while ((ret = usart_read_char(usart, &c)) == USART_RX_EMPTY); + + if (ret == USART_RX_ERROR) + return USART_FAILURE; + + return c; +} + + +void usart_write_line(volatile avr32_usart_t *usart, const char *string) +{ + while (*string != '\0') + usart_putchar(usart, *string++); +} + + +int usart_get_echo_line(volatile avr32_usart_t *usart) +{ + int rx_char; + int retval = USART_SUCCESS; + + while (1) + { + rx_char = usart_getchar(usart); + if (rx_char == USART_FAILURE) + { + usart_write_line(usart, "Error!!!\n"); + retval = USART_FAILURE; + break; + } + if (rx_char == '\x03') + { + retval = USART_FAILURE; + break; + } + usart_putchar(usart, rx_char); + if (rx_char == '\r') + { + usart_putchar(usart, '\n'); + break; + } + } + + return retval; +} + + +//! @} diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/USART/usart.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/USART/usart.h new file mode 100644 index 0000000000..6230a5b3ef --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/DRIVERS/USART/usart.h @@ -0,0 +1,889 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief USART driver for AVR32 UC3. + * + * This file contains basic functions for the AVR32 USART, with support for all + * modes, settings and clock speeds. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices with a USART module can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef _USART_H_ +#define _USART_H_ + +#include +#include "compiler.h" + + +/*! \name Return Values + */ +//! @{ +#define USART_SUCCESS 0 //!< Successful completion. +#define USART_FAILURE -1 //!< Failure because of some unspecified reason. +#define USART_INVALID_INPUT 1 //!< Input value out of range. +#define USART_INVALID_ARGUMENT -1 //!< Argument value out of range. +#define USART_TX_BUSY 2 //!< Transmitter was busy. +#define USART_RX_EMPTY 3 //!< Nothing was received. +#define USART_RX_ERROR 4 //!< Transmission error occurred. +#define USART_MODE_FAULT 5 //!< USART not in the appropriate mode. +//! @} + +//! Default time-out value (number of attempts). +#define USART_DEFAULT_TIMEOUT 10000 + +/*! \name Parity Settings + */ +//! @{ +#define USART_EVEN_PARITY AVR32_USART_MR_PAR_EVEN //!< Use even parity on character transmission. +#define USART_ODD_PARITY AVR32_USART_MR_PAR_ODD //!< Use odd parity on character transmission. +#define USART_SPACE_PARITY AVR32_USART_MR_PAR_SPACE //!< Use a space as parity bit. +#define USART_MARK_PARITY AVR32_USART_MR_PAR_MARK //!< Use a mark as parity bit. +#define USART_NO_PARITY AVR32_USART_MR_PAR_NONE //!< Don't use a parity bit. +#define USART_MULTIDROP_PARITY AVR32_USART_MR_PAR_MULTI //!< Parity bit is used to flag address characters. +//! @} + +/*! \name Stop Bits Settings + */ +//! @{ +#define USART_1_STOPBIT AVR32_USART_MR_NBSTOP_1 //!< Use 1 stop bit. +#define USART_1_5_STOPBITS AVR32_USART_MR_NBSTOP_1_5 //!< Use 1.5 stop bits. +#define USART_2_STOPBITS AVR32_USART_MR_NBSTOP_2 //!< Use 2 stop bits (for more, just give the number of bits). +//! @} + +/*! \name Channel Modes + */ +//! @{ +#define USART_NORMAL_CHMODE AVR32_USART_MR_CHMODE_NORMAL //!< Normal communication. +#define USART_AUTO_ECHO AVR32_USART_MR_CHMODE_ECHO //!< Echo data. +#define USART_LOCAL_LOOPBACK AVR32_USART_MR_CHMODE_LOCAL_LOOP //!< Local loopback. +#define USART_REMOTE_LOOPBACK AVR32_USART_MR_CHMODE_REMOTE_LOOP //!< Remote loopback. +//! @} + +#if defined(AVR32_USART_400_H_INCLUDED) || \ + defined(AVR32_USART_410_H_INCLUDED) || \ + defined(AVR32_USART_420_H_INCLUDED) || \ + defined(AVR32_USART_440_H_INCLUDED) || \ + defined(AVR32_USART_602_H_INCLUDED) + +/*! \name LIN Node Actions + */ +//! @{ +#define USART_LIN_PUBLISH_ACTION AVR32_USART_LINMR_NACT_PUBLISH //!< The USART transmits the response. +#define USART_LIN_SUBSCRIBE_ACTION AVR32_USART_LINMR_NACT_SUBSCRIBE //!< The USART receives the response. +#define USART_LIN_IGNORE_ACTION AVR32_USART_LINMR_NACT_IGNORE //!< The USART does not transmit and does not receive the reponse. +//! @} + +/*! \name LIN Checksum Types + */ +//! @{ +#define USART_LIN_ENHANCED_CHECKSUM 0 //!< LIN 2.0 "enhanced" checksum. +#define USART_LIN_CLASSIC_CHECKSUM 1 //!< LIN 1.3 "classic" checksum. +//! @} + +#endif // USART rev. >= 4.0.0 + + +//! Input parameters when initializing RS232 and similar modes. +typedef struct +{ + //! Set baud rate of the USART (unused in slave modes). + unsigned long baudrate; + + //! Number of bits to transmit as a character (5 to 9). + unsigned char charlength; + + //! How to calculate the parity bit: \ref USART_EVEN_PARITY, \ref USART_ODD_PARITY, + //! \ref USART_SPACE_PARITY, \ref USART_MARK_PARITY, \ref USART_NO_PARITY or + //! \ref USART_MULTIDROP_PARITY. + unsigned char paritytype; + + //! Number of stop bits between two characters: \ref USART_1_STOPBIT, + //! \ref USART_1_5_STOPBITS, \ref USART_2_STOPBITS or any number from 3 to 257 + //! which will result in a time guard period of that length between characters. + //! \note \ref USART_1_5_STOPBITS is supported in asynchronous modes only. + unsigned short stopbits; + + //! Run the channel in testmode: \ref USART_NORMAL_CHMODE, \ref USART_AUTO_ECHO, + //! \ref USART_LOCAL_LOOPBACK or \ref USART_REMOTE_LOOPBACK. + unsigned char channelmode; +} usart_options_t; + +//! Input parameters when initializing ISO7816 mode. +typedef struct +{ + //! Set the frequency of the ISO7816 clock. + unsigned long iso7816_hz; + + //! The number of ISO7816 clock ticks in every bit period (1 to 2047, 0 = disable clock). + //! Bit rate = \ref iso7816_hz / \ref fidi_ratio. + unsigned short fidi_ratio; + + //! How to calculate the parity bit: \ref USART_EVEN_PARITY for normal mode or + //! \ref USART_ODD_PARITY for inverse mode. + unsigned char paritytype; + + //! Inhibit Non Acknowledge:\n + //! - 0: the NACK is generated;\n + //! - 1: the NACK is not generated. + //! + //! \note This bit will be used only in ISO7816 mode, protocol T = 0 receiver. + int inhibit_nack; + + //! Disable successive NACKs. + //! Successive parity errors are counted up to the value in the \ref max_iterations field. + //! These parity errors generate a NACK on the ISO line. As soon as this value is reached, + //! no addititional NACK is sent on the ISO line. The ITERATION flag is asserted. + int dis_suc_nack; + + //! Max number of repetitions (0 to 7). + unsigned char max_iterations; + + //! Bit order in transmitted characters:\n + //! - 0: LSB first;\n + //! - 1: MSB first. + int bit_order; +} usart_iso7816_options_t; + +#if defined(AVR32_USART_400_H_INCLUDED) || \ + defined(AVR32_USART_410_H_INCLUDED) || \ + defined(AVR32_USART_420_H_INCLUDED) || \ + defined(AVR32_USART_440_H_INCLUDED) || \ + defined(AVR32_USART_602_H_INCLUDED) + +//! Input parameters when initializing SPI mode. +typedef struct +{ + //! Set the frequency of the SPI clock (unused in slave mode). + unsigned long baudrate; + + //! Number of bits to transmit as a character (5 to 9). + unsigned char charlength; + + //! Which SPI mode to use. + unsigned char spimode; + + //! Run the channel in testmode: \ref USART_NORMAL_CHMODE, \ref USART_AUTO_ECHO, + //! \ref USART_LOCAL_LOOPBACK or \ref USART_REMOTE_LOOPBACK. + unsigned char channelmode; +} usart_spi_options_t; + +#endif // USART rev. >= 4.0.0 + + +//------------------------------------------------------------------------------ +/*! \name Initialization Functions + */ +//! @{ + +/*! \brief Resets the USART and disables TX and RX. + * + * \param usart Base address of the USART instance. + */ +extern void usart_reset(volatile avr32_usart_t *usart); + +/*! \brief Sets up the USART to use the standard RS232 protocol. + * + * \param usart Base address of the USART instance. + * \param opt Options needed to set up RS232 communication (see \ref usart_options_t). + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * + * \retval USART_SUCCESS Mode successfully initialized. + * \retval USART_INVALID_INPUT One or more of the arguments is out of valid range. + */ +extern int usart_init_rs232(volatile avr32_usart_t *usart, const usart_options_t *opt, long pba_hz); + +/*! \brief Sets up the USART to use the standard RS232 protocol in TX-only mode. + * + * Compared to \ref usart_init_rs232, this function allows very high baud rates + * (up to \a pba_hz instead of \a pba_hz / \c 8) at the expense of full duplex. + * + * \param usart Base address of the USART instance. + * \param opt Options needed to set up RS232 communication (see \ref usart_options_t). + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * + * \retval USART_SUCCESS Mode successfully initialized. + * \retval USART_INVALID_INPUT One or more of the arguments is out of valid range. + * + * \note The \c 1.5 stop bit is not supported in this mode. + */ +extern int usart_init_rs232_tx_only(volatile avr32_usart_t *usart, const usart_options_t *opt, long pba_hz); + +/*! \brief Sets up the USART to use hardware handshaking. + * + * \param usart Base address of the USART instance. + * \param opt Options needed to set up RS232 communication (see \ref usart_options_t). + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * + * \retval USART_SUCCESS Mode successfully initialized. + * \retval USART_INVALID_INPUT One or more of the arguments is out of valid range. + * + * \note \ref usart_init_rs232 does not need to be invoked before this function. + */ +extern int usart_init_hw_handshaking(volatile avr32_usart_t *usart, const usart_options_t *opt, long pba_hz); + +/*! \brief Sets up the USART to use the modem protocol, activating dedicated inputs/outputs. + * + * \param usart Base address of the USART instance. + * \param opt Options needed to set up RS232 communication (see \ref usart_options_t). + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * + * \retval USART_SUCCESS Mode successfully initialized. + * \retval USART_INVALID_INPUT One or more of the arguments is out of valid range. + */ +extern int usart_init_modem(volatile avr32_usart_t *usart, const usart_options_t *opt, long pba_hz); + +/*! \brief Sets up the USART to use a synchronous RS232-like protocol in master mode. + * + * \param usart Base address of the USART instance. + * \param opt Options needed to set up RS232 communication (see \ref usart_options_t). + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * + * \retval USART_SUCCESS Mode successfully initialized. + * \retval USART_INVALID_INPUT One or more of the arguments is out of valid range. + */ +extern int usart_init_sync_master(volatile avr32_usart_t *usart, const usart_options_t *opt, long pba_hz); + +/*! \brief Sets up the USART to use a synchronous RS232-like protocol in slave mode. + * + * \param usart Base address of the USART instance. + * \param opt Options needed to set up RS232 communication (see \ref usart_options_t). + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * + * \retval USART_SUCCESS Mode successfully initialized. + * \retval USART_INVALID_INPUT One or more of the arguments is out of valid range. + */ +extern int usart_init_sync_slave(volatile avr32_usart_t *usart, const usart_options_t *opt, long pba_hz); + +/*! \brief Sets up the USART to use the RS485 protocol. + * + * \param usart Base address of the USART instance. + * \param opt Options needed to set up RS232 communication (see \ref usart_options_t). + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * + * \retval USART_SUCCESS Mode successfully initialized. + * \retval USART_INVALID_INPUT One or more of the arguments is out of valid range. + */ +extern int usart_init_rs485(volatile avr32_usart_t *usart, const usart_options_t *opt, long pba_hz); + +/*! \brief Sets up the USART to use the IrDA protocol. + * + * \param usart Base address of the USART instance. + * \param opt Options needed to set up RS232 communication (see \ref usart_options_t). + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * \param irda_filter Counter used to distinguish received ones from zeros. + * + * \retval USART_SUCCESS Mode successfully initialized. + * \retval USART_INVALID_INPUT One or more of the arguments is out of valid range. + */ +extern int usart_init_IrDA(volatile avr32_usart_t *usart, const usart_options_t *opt, + long pba_hz, unsigned char irda_filter); + +/*! \brief Sets up the USART to use the ISO7816 T=0 or T=1 smartcard protocols. + * + * The receiver is enabled by default. \ref usart_iso7816_enable_receiver and + * \ref usart_iso7816_enable_transmitter can be called to change the half-duplex + * communication direction. + * + * \param usart Base address of the USART instance. + * \param opt Options needed to set up ISO7816 communication (see \ref usart_iso7816_options_t). + * \param t ISO7816 mode to use (T=0 or T=1). + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * + * \retval USART_SUCCESS Mode successfully initialized. + * \retval USART_INVALID_INPUT One or more of the arguments is out of valid range. + */ +extern int usart_init_iso7816(volatile avr32_usart_t *usart, const usart_iso7816_options_t *opt, int t, long pba_hz); + +#if defined(AVR32_USART_400_H_INCLUDED) || \ + defined(AVR32_USART_410_H_INCLUDED) || \ + defined(AVR32_USART_420_H_INCLUDED) || \ + defined(AVR32_USART_440_H_INCLUDED) || \ + defined(AVR32_USART_602_H_INCLUDED) + +/*! \brief Sets up the USART to use the LIN master mode. + * + * \param usart Base address of the USART instance. + * \param baudrate Baud rate. + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * + */ +extern int usart_init_lin_master(volatile avr32_usart_t *usart, unsigned long baudrate, long pba_hz); + +/*! \brief Sets up the USART to use the LIN slave mode. + * + * \param usart Base address of the USART instance. + * \param baudrate Baud rate. + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * + */ +extern int usart_init_lin_slave(volatile avr32_usart_t *usart, unsigned long baudrate, long pba_hz); + +/*! \brief Sets up the USART to use the SPI master mode. + * + * \ref usart_spi_selectChip and \ref usart_spi_unselectChip can be called to + * select or unselect the SPI slave chip. + * + * \param usart Base address of the USART instance. + * \param opt Options needed to set up SPI mode (see \ref usart_spi_options_t). + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * + * \retval USART_SUCCESS Mode successfully initialized. + * \retval USART_INVALID_INPUT One or more of the arguments is out of valid range. + */ +extern int usart_init_spi_master(volatile avr32_usart_t *usart, const usart_spi_options_t *opt, long pba_hz); + +/*! \brief Sets up the USART to use the SPI slave mode. + * + * \param usart Base address of the USART instance. + * \param opt Options needed to set up SPI mode (see \ref usart_spi_options_t). + * \param pba_hz USART module input clock frequency (PBA clock, Hz). + * + * \retval USART_SUCCESS Mode successfully initialized. + * \retval USART_INVALID_INPUT One or more of the arguments is out of valid range. + */ +extern int usart_init_spi_slave(volatile avr32_usart_t *usart, const usart_spi_options_t *opt, long pba_hz); + +#endif // USART rev. >= 4.0.0 + +//! @} + + +//------------------------------------------------------------------------------ +/*! \name Read and Reset Error Status Bits + */ +//! @{ + +/*! \brief Resets the error status. + * + * This function resets the status bits indicating that a parity error, + * framing error or overrun has occurred. The RXBRK bit, indicating + * a start/end of break condition on the RX line, is also reset. + * + * \param usart Base address of the USART instance. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void usart_reset_status(volatile avr32_usart_t *usart) +{ + usart->cr = AVR32_USART_CR_RSTSTA_MASK; +} + +/*! \brief Checks if a parity error has occurred since last status reset. + * + * \param usart Base address of the USART instance. + * + * \return \c 1 if a parity error has been detected, otherwise \c 0. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ int usart_parity_error(volatile avr32_usart_t *usart) +{ + return (usart->csr & AVR32_USART_CSR_PARE_MASK) != 0; +} + +/*! \brief Checks if a framing error has occurred since last status reset. + * + * \param usart Base address of the USART instance. + * + * \return \c 1 if a framing error has been detected, otherwise \c 0. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ int usart_framing_error(volatile avr32_usart_t *usart) +{ + return (usart->csr & AVR32_USART_CSR_FRAME_MASK) != 0; +} + +/*! \brief Checks if an overrun error has occurred since last status reset. + * + * \param usart Base address of the USART instance. + * + * \return \c 1 if a overrun error has been detected, otherwise \c 0. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ int usart_overrun_error(volatile avr32_usart_t *usart) +{ + return (usart->csr & AVR32_USART_CSR_OVRE_MASK) != 0; +} + +#if defined(AVR32_USART_400_H_INCLUDED) || \ + defined(AVR32_USART_410_H_INCLUDED) || \ + defined(AVR32_USART_420_H_INCLUDED) || \ + defined(AVR32_USART_440_H_INCLUDED) || \ + defined(AVR32_USART_602_H_INCLUDED) + +/*! \brief Get LIN Error Status + * + * \param usart Base address of the USART instance. + * + * \retval The binary value of the error field. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ int usart_lin_get_error(volatile avr32_usart_t *usart) +{ + return (usart->csr & (AVR32_USART_CSR_LINSNRE_MASK | + AVR32_USART_CSR_LINCE_MASK | + AVR32_USART_CSR_LINIPE_MASK | + AVR32_USART_CSR_LINISFE_MASK | + AVR32_USART_CSR_LINBE_MASK)) >> AVR32_USART_CSR_LINBE_OFFSET; +} + +#endif // USART rev. >= 4.0.0 + +//! @} + + +//------------------------------------------------------------------------------ +/*! \name ISO7816 Control Functions + */ +//! @{ + +/*! \brief Enables the ISO7816 receiver. + * + * The ISO7816 transmitter is disabled. + * + * \param usart Base address of the USART instance. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void usart_iso7816_enable_receiver(volatile avr32_usart_t *usart) +{ + usart->cr = AVR32_USART_CR_TXDIS_MASK | AVR32_USART_CR_RXEN_MASK; +} + +/*! \brief Enables the ISO7816 transmitter. + * + * The ISO7816 receiver is disabled. + * + * \param usart Base address of the USART instance. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void usart_iso7816_enable_transmitter(volatile avr32_usart_t *usart) +{ + usart->cr = AVR32_USART_CR_RXDIS_MASK | AVR32_USART_CR_TXEN_MASK; +} + +//! @} + + +//------------------------------------------------------------------------------ +#if defined(AVR32_USART_400_H_INCLUDED) || \ + defined(AVR32_USART_410_H_INCLUDED) || \ + defined(AVR32_USART_420_H_INCLUDED) || \ + defined(AVR32_USART_440_H_INCLUDED) || \ + defined(AVR32_USART_602_H_INCLUDED) + +/*! \name LIN Control Functions + */ +//! @{ + +/*! \brief Sets the node action. + * + * \param usart Base address of the USART instance. + * \param action The node action: \ref USART_LIN_PUBLISH_ACTION, + * \ref USART_LIN_SUBSCRIBE_ACTION or + * \ref USART_LIN_IGNORE_ACTION. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void usart_lin_set_node_action(volatile avr32_usart_t *usart, unsigned char action) +{ + usart->linmr = (usart->linmr & ~AVR32_USART_LINMR_NACT_MASK) | + action << AVR32_USART_LINMR_NACT_OFFSET; +} + +/*! \brief Enables or disables the Identifier parity. + * + * \param usart Base address of the USART instance. + * \param parity Whether to enable the Identifier parity: \c TRUE or \c FALSE. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void usart_lin_enable_parity(volatile avr32_usart_t *usart, unsigned char parity) +{ + usart->linmr = (usart->linmr & ~AVR32_USART_LINMR_PARDIS_MASK) | + !parity << AVR32_USART_LINMR_PARDIS_OFFSET; +} + +/*! \brief Enables or disables the checksum. + * + * \param usart Base address of the USART instance. + * \param parity Whether to enable the checksum: \c TRUE or \c FALSE. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void usart_lin_enable_checksum(volatile avr32_usart_t *usart, unsigned char checksum) +{ + usart->linmr = (usart->linmr & ~AVR32_USART_LINMR_CHKDIS_MASK) | + !checksum << AVR32_USART_LINMR_CHKDIS_OFFSET; +} + +/*! \brief Sets the checksum type. + * + * \param usart Base address of the USART instance. + * \param chktyp The checksum type: \ref USART_LIN_ENHANCED_CHEKSUM or + * \ref USART_LIN_CLASSIC_CHECKSUM. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void usart_lin_set_checksum(volatile avr32_usart_t *usart, unsigned char chktyp) +{ + usart->linmr = (usart->linmr & ~AVR32_USART_LINMR_CHKTYP_MASK) | + chktyp << AVR32_USART_LINMR_CHKTYP_OFFSET; +} + +/*! \brief Gets the response data length. + * + * \param usart Base address of the USART instance. + * + * \return The response data length. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ unsigned char usart_lin_get_data_length(volatile avr32_usart_t *usart) +{ + if (usart->linmr & AVR32_USART_LINMR_DLM_MASK) + { + unsigned char data_length = 1 << ((usart->linir >> (AVR32_USART_LINIR_IDCHR_OFFSET + 4)) & 0x03); + if (data_length == 1) + data_length = 2; + return data_length; + } + else + return ((usart->linmr & AVR32_USART_LINMR_DLC_MASK) >> AVR32_USART_LINMR_DLC_OFFSET) + 1; +} + +/*! \brief Sets the response data length for LIN 1.x. + * + * \param usart Base address of the USART instance. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void usart_lin_set_data_length_lin1x(volatile avr32_usart_t *usart) +{ + usart->linmr |= AVR32_USART_LINMR_DLM_MASK; +} + +/*! \brief Sets the response data length for LIN 2.x. + * + * \param usart Base address of the USART instance. + * \param data_length The response data length. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void usart_lin_set_data_length_lin2x(volatile avr32_usart_t *usart, unsigned char data_length) +{ + usart->linmr = (usart->linmr & ~(AVR32_USART_LINMR_DLC_MASK | + AVR32_USART_LINMR_DLM_MASK)) | + (data_length - 1) << AVR32_USART_LINMR_DLC_OFFSET; +} + +/*! \brief Enables or disables the frame slot mode. + * + * \param usart Base address of the USART instance. + * \param frameslot Whether to enable the frame slot mode: \c TRUE or + * \c FALSE. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void usart_lin_enable_frameslot(volatile avr32_usart_t *usart, unsigned char frameslot) +{ + usart->linmr = (usart->linmr & ~AVR32_USART_LINMR_FSDIS_MASK) | + !frameslot << AVR32_USART_LINMR_FSDIS_OFFSET; +} + +/*! \brief Gets the Identifier character. + * + * \param usart Base address of the USART instance. + * + * \return The Identifier character. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ unsigned char usart_lin_get_id_char(volatile avr32_usart_t *usart) +{ + return (usart->linir & AVR32_USART_LINIR_IDCHR_MASK) >> AVR32_USART_LINIR_IDCHR_OFFSET; +} + +/*! \brief Sets the Identifier character. + * + * \param usart Base address of the USART instance. + * \param id_char The Identifier character. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void usart_lin_set_id_char(volatile avr32_usart_t *usart, unsigned char id_char) +{ + usart->linir = (usart->linir & ~AVR32_USART_LINIR_IDCHR_MASK) | + id_char << AVR32_USART_LINIR_IDCHR_OFFSET; +} + +//! @} + +#endif // USART rev. >= 4.0.0 + + +//------------------------------------------------------------------------------ +#if defined(AVR32_USART_400_H_INCLUDED) || \ + defined(AVR32_USART_410_H_INCLUDED) || \ + defined(AVR32_USART_420_H_INCLUDED) || \ + defined(AVR32_USART_440_H_INCLUDED) || \ + defined(AVR32_USART_602_H_INCLUDED) + +/*! \name SPI Control Functions + */ +//! @{ + +/*! \brief Selects SPI slave chip. + * + * \param usart Base address of the USART instance. + * + * \retval USART_SUCCESS Success. + */ +extern int usart_spi_selectChip(volatile avr32_usart_t *usart); + +/*! \brief Unselects SPI slave chip. + * + * \param usart Base address of the USART instance. + * + * \retval USART_SUCCESS Success. + * \retval USART_FAILURE Time-out. + */ +extern int usart_spi_unselectChip(volatile avr32_usart_t *usart); + +//! @} + +#endif // USART rev. >= 4.0.0 + + +//------------------------------------------------------------------------------ +/*! \name Transmit/Receive Functions + */ +//! @{ + +/*! \brief Addresses a receiver. + * + * While in RS485 mode, receivers only accept data addressed to them. + * A packet/char with the address tag set has to precede any data. + * This function is used to address a receiver. This receiver should read + * all the following data, until an address packet addresses another receiver. + * + * \param usart Base address of the USART instance. + * \param address Address of the target device. + * + * \retval USART_SUCCESS Address successfully sent (if current mode is RS485). + * \retval USART_MODE_FAULT Wrong operating mode. + */ +extern int usart_send_address(volatile avr32_usart_t *usart, int address); + +/*! \brief Tests if the USART is ready to transmit a character. + * + * \param usart Base address of the USART instance. + * + * \return \c 1 if the USART Transmit Holding Register is free, otherwise \c 0. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ int usart_tx_ready(volatile avr32_usart_t *usart) +{ + return (usart->csr & AVR32_USART_CSR_TXRDY_MASK) != 0; +} + +/*! \brief Writes the given character to the TX buffer if the transmitter is ready. + * + * \param usart Base address of the USART instance. + * \param c The character (up to 9 bits) to transmit. + * + * \retval USART_SUCCESS The transmitter was ready. + * \retval USART_TX_BUSY The transmitter was busy. + */ +extern int usart_write_char(volatile avr32_usart_t *usart, int c); + +/*! \brief An active wait writing a character to the USART. + * + * \param usart Base address of the USART instance. + * \param c The character (up to 9 bits) to transmit. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void usart_bw_write_char(volatile avr32_usart_t *usart, int c) +{ + while (usart_write_char(usart, c) != USART_SUCCESS); +} + +/*! \brief Sends a character with the USART. + * + * \param usart Base address of the USART instance. + * \param c Character to write. + * + * \retval USART_SUCCESS The character was written. + * \retval USART_FAILURE The function timed out before the USART transmitter became ready to send. + */ +extern int usart_putchar(volatile avr32_usart_t *usart, int c); + +/*! \brief Tests if all requested USART transmissions are over. + * + * \param usart Base address of the USART instance. + * + * \return \c 1 if the USART Transmit Shift Register and the USART Transmit + * Holding Register are free, otherwise \c 0. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ int usart_tx_empty(volatile avr32_usart_t *usart) +{ + return (usart->csr & AVR32_USART_CSR_TXEMPTY_MASK) != 0; +} + +/*! \brief Tests if the USART contains a received character. + * + * \param usart Base address of the USART instance. + * + * \return \c 1 if the USART Receive Holding Register is full, otherwise \c 0. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ int usart_test_hit(volatile avr32_usart_t *usart) +{ + return (usart->csr & AVR32_USART_CSR_RXRDY_MASK) != 0; +} + +/*! \brief Checks the RX buffer for a received character, and stores it at the + * given memory location. + * + * \param usart Base address of the USART instance. + * \param c Pointer to the where the read character should be stored + * (must be at least short in order to accept 9-bit characters). + * + * \retval USART_SUCCESS The character was read successfully. + * \retval USART_RX_EMPTY The RX buffer was empty. + * \retval USART_RX_ERROR An error was deteceted. + */ +extern int usart_read_char(volatile avr32_usart_t *usart, int *c); + +/*! \brief Waits until a character is received, and returns it. + * + * \param usart Base address of the USART instance. + * + * \return The received character, or \ref USART_FAILURE upon error. + */ +extern int usart_getchar(volatile avr32_usart_t *usart); + +/*! \brief Writes one character string to the USART. + * + * \param usart Base address of the USART instance. + * \param string String to be written. + */ +extern void usart_write_line(volatile avr32_usart_t *usart, const char *string); + +/*! \brief Gets and echoes characters until end of line. + * + * \param usart Base address of the USART instance. + * + * \retval USART_SUCCESS Success. + * \retval USART_FAILURE Low-level error detected or ETX character received. + */ +extern int usart_get_echo_line(volatile avr32_usart_t *usart); + +#if defined(AVR32_USART_400_H_INCLUDED) || \ + defined(AVR32_USART_410_H_INCLUDED) || \ + defined(AVR32_USART_420_H_INCLUDED) || \ + defined(AVR32_USART_440_H_INCLUDED) || \ + defined(AVR32_USART_602_H_INCLUDED) + +/*! \brief Abort LIN transmission. + * + * \param usart Base address of the USART instance. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ void usart_lin_abort(volatile avr32_usart_t *usart) +{ + usart->cr = AVR32_USART_LINABT_MASK; +} + +/*! \brief Tests if a LIN transfer has been completed. + * + * \param usart Base address of the USART instance. + * + * \return \c 1 if a LIN transfer has been completed, otherwise \c 0. + */ +#if (defined __GNUC__) +__attribute__((__always_inline__)) +#endif +extern __inline__ int usart_lin_transfer_completed(volatile avr32_usart_t *usart) +{ + return (usart->csr & AVR32_USART_CSR_LINTC_MASK) != 0; +} + +#endif // USART rev. >= 4.0.0 + +//! @} + + +#endif // _USART_H_ diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE/nlao_cpu.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE/nlao_cpu.h new file mode 100644 index 0000000000..101c9df7af --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE/nlao_cpu.h @@ -0,0 +1,63 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief NEWLIB_ADDONS CPU include file for AVR32. + * + * - Compiler: GNU GCC for AVR32 + * - Supported devices: All AVR32 devices can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef __AVR32_NEWLIB_ADDONS_CPU_H__ +#define __AVR32_NEWLIB_ADDONS_CPU_H__ + +#include <_ansi.h> + +_BEGIN_STD_C + +#define CPU_HZ get_cpu_hz() + +void udelay(unsigned long usec); +void set_cpu_hz(unsigned int clk_hz); +unsigned int get_cpu_hz(); + +_END_STD_C + +#endif diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE/nlao_exceptions.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE/nlao_exceptions.h new file mode 100644 index 0000000000..6e9168cb93 --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE/nlao_exceptions.h @@ -0,0 +1,120 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief NEWLIB_ADDONS exceptions include file for AVR32. + * + * - Compiler: GNU GCC for AVR32 + * - Supported devices: All AVR32 devices can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef __AVR32_NEWLIB_ADDONS_EXCEPTIONS_H__ +#define __AVR32_NEWLIB_ADDONS_EXCEPTIONS_H__ + +#include <_ansi.h> + +_BEGIN_STD_C + +/* + Exception vector offsets +*/ +#define EVBA_UNRECOVERABLE 0x000 +#define EVBA_TLB_MULTIPLE 0x004 +#define EVBA_BUS_ERROR_DATA 0x008 +#define EVBA_BUS_ERROR_INSTR 0x00C +#define EVBA_NMI 0x010 +#define EVBA_INSTR_ADDR 0x014 +#define EVBA_ITLB_MISS 0x050 +#define EVBA_ITLB_PROT 0x018 +#define EVBA_BREAKPOINT 0x01C +#define EVBA_ILLEGAL_OPCODE 0x020 +#define EVBA_UNIMPLEMENTED 0x024 +#define EVBA_PRIVILEGE_VIOL 0x028 +#define EVBA_FLOATING_POINT 0x02C +#define EVBA_COP_ABSENT 0x030 +#define EVBA_SCALL 0x100 +#define EVBA_DATA_ADDR_R 0x034 +#define EVBA_DATA_ADDR_W 0x038 +#define EVBA_DTLB_MISS_R 0x060 +#define EVBA_DTLB_MISS_W 0x070 +#define EVBA_DTLB_PROT_R 0x03C +#define EVBA_DTLB_PROT_W 0x040 +#define EVBA_DTLB_MODIFIED 0x044 + + +/* + Define the form of the function used when registering exceptions. + The function should return the address which the exception should + return to after the exception processing. +*/ + +typedef unsigned int (*__exception_handler)(int /*evba_offset*/, int /*return address*/); + +/* + Define the form of the function used when registering a scall handler. +*/ + +typedef void (*__scall_handler)(int /*code*/, int /*p1*/, int /*p2*/ + , int /*p3*/, int /*p4*/); + +/* + Function for registering an exception handler for the exception with + offset given by evba_offset. +*/ +void _register_exception_handler(__exception_handler handler, int evba_offset); + +/* + Function for registering a scall handler which can be a arbirary + function which uses r8-r12 for parameters. +*/ +void _register_scall_handler(__scall_handler handler); + +/* + Initialize exceptions. Must be called before registering exception handlers + and needed to enable exceptions. 'evba' is the pointer to the exception + vector. 'handler_table' is a pointer to an array where the pointers to + the exception handlers are stored. This array must be at least 0x104 bytes + and word aligned. +*/ +void init_exceptions(void *evba, void *handler_table); + +_END_STD_C + +#endif diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE/nlao_interrupts.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE/nlao_interrupts.h new file mode 100644 index 0000000000..057c005223 --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE/nlao_interrupts.h @@ -0,0 +1,82 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief NEWLIB_ADDONS interrupts include file for AVR32. + * + * - Compiler: GNU GCC for AVR32 + * - Supported devices: All AVR32 devices can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef __AVR32_NEWLIB_ADDONS_INTERRUPTS_H__ +#define __AVR32_NEWLIB_ADDONS_INTERRUPTS_H__ + +#include <_ansi.h> + +_BEGIN_STD_C + +#define INT_GRPS 64 +#define INT_LINES 32 +#define INTPR_BASE (__intc_base__ + 0x0000) +#define INTREQ_BASE (__intc_base__ + 64*4) +#define INTCAUSE_BASE (__intc_base__ + 2*64*4) + +//Register offsets +#define INTLEVEL 30 +#define AUTOVECTOR 0 +#define AUTOVECTOR_BITS 14 + +//Priorities +#define INT0 0 +#define INT1 1 +#define INT2 2 +#define INT3 3 + + +typedef void (*__newlib_int_handler)(int /* int_grp*/, void */*user_handle*/); + +__newlib_int_handler register_interrupt(__newlib_int_handler handler, int int_grp, int line, int priority, + .../* void *user_handle*/); +void init_interrupts(); +void set_interrupts_base(void *base); + +_END_STD_C + +#endif diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE/nlao_io.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE/nlao_io.h new file mode 100644 index 0000000000..2e515c63f8 --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE/nlao_io.h @@ -0,0 +1,174 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief NEWLIB_ADDONS miscellaneous macros include file for AVR32. + * + * - Compiler: GNU GCC for AVR32 + * - Supported devices: All AVR32 devices can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef __AVR32_NEWLIB_ADDONS_IO_H__ +#define __AVR32_NEWLIB_ADDONS_IO_H__ + +#include <_ansi.h> + +_BEGIN_STD_C + +typedef char u8; +typedef unsigned int u32; + +#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v)) +#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) +#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) + +#define __raw_readb(a) (*(volatile unsigned char *)(a)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_readl(a) (*(volatile unsigned int *)(a)) + +/* As long as I/O is only performed in P4 (or possibly P3), we're safe */ +#define writeb(v,a) __raw_writeb(v,a) +#define writew(v,a) __raw_writew(v,a) +#define writel(v,a) __raw_writel(v,a) + +#define readb(a) __raw_readb(a) +#define readw(a) __raw_readw(a) +#define readl(a) __raw_readl(a) + +/* Memory segments when segmentation is enabled */ +#define P0SEG 0x00000000 +#define P1SEG 0x80000000 +#define P2SEG 0xa0000000 +#define P3SEG 0xc0000000 +#define P4SEG 0xe0000000 + +/* Returns the privileged segment base of a given address */ +#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000) + +/* Returns the physical address of a PnSEG (n=1,2) address */ +#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) + +/* + * Map an address to a certain privileged segment + */ +#define P1SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG)) +#define P2SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG)) +#define P3SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG)) +#define P4SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG)) + + +#define cached(addr) P1SEGADDR(addr) +#define uncached(addr) P2SEGADDR(addr) +#define physaddr(addr) PHYSADDR(addr) + +#define BF(field, value) \ + ({ union { \ + struct { \ + unsigned : 32 - field ## _OFFSET - field ## _SIZE ; \ + unsigned long __val: field ## _SIZE ; \ + }; \ + unsigned long __ul; \ + } __tmp; \ + __tmp.__ul = 0; \ + __tmp.__val = value; \ + __tmp.__ul;}) + +#define BF_D(field, value) \ + ({ union { \ + struct { \ + unsigned long long : 64 - field ## _OFFSET - field ## _SIZE ; \ + unsigned long long __val: field ## _SIZE ; \ + }; \ + unsigned long long __ul; \ + } __tmp; \ + __tmp.__ul = 0; \ + __tmp.__val = value; \ + __tmp.__ul;}) + +#define BFINS(var, field, value) \ + { union {\ + struct { \ + unsigned : 32 - field ## _OFFSET - field ## _SIZE ; \ + unsigned long __val: field ## _SIZE ; \ + }; \ + unsigned long __ul; \ + } __tmp; \ + __tmp.__ul = var; \ + __tmp.__val = value; \ + var = __tmp.__ul;} + +#define BFEXT(var, field) \ + ({ union {\ + struct { \ + unsigned : 32 - field ## _OFFSET - field ## _SIZE ; \ + unsigned long __val: field ## _SIZE ; \ + }; \ + unsigned long __ul; \ + } __tmp; \ + __tmp.__ul = var; \ + __tmp.__val; }) + +#define BFINS_D(var, field, value) \ + { union {\ + struct { \ + unsigned long long : 64 - field ## _OFFSET - field ## _SIZE ; \ + unsigned long long __val: field ## _SIZE ; \ + }; \ + unsigned long long __ul; \ + } __tmp; \ + __tmp.__ul = var; \ + __tmp.__val = value; \ + var = __tmp.__ul;} + +#define BFEXT_D(var, field) \ + ({ union {\ + struct { \ + unsigned long long : 64 - field ## _OFFSET - field ## _SIZE ; \ + unsigned long long __val: field ## _SIZE ; \ + }; \ + unsigned long long __ul; \ + } __tmp; \ + __tmp.__ul = var; \ + __tmp.__val; }) + + +_END_STD_C + +#endif diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE/nlao_usart.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE/nlao_usart.h new file mode 100644 index 0000000000..36d3cab168 --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE/nlao_usart.h @@ -0,0 +1,208 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief NEWLIB_ADDONS USART include file for AVR32. + * + * - Compiler: GNU GCC for AVR32 + * - Supported devices: All AVR32 devices can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef __AVR32_NEWLIB_ADDONS_USART_H__ +#define __AVR32_NEWLIB_ADDONS_USART_H__ + +#include <_ansi.h> + +#include "nlao_io.h" + +_BEGIN_STD_C + +struct usart3 { + volatile u32 us_cr; + volatile u32 us_mr; + volatile u32 us_ier; + volatile u32 us_idr; + volatile u32 us_imr; + volatile u32 us_csr; + volatile u32 us_rhr; + volatile u32 us_thr; + volatile u32 us_brgr; + volatile u32 us_rtor; + volatile u32 us_ttgr; + volatile u32 us_reserved[5]; + volatile u32 us_fidi; + volatile u32 us_ner; + volatile u32 us_xxr; + volatile u32 us_if; +}; + +/* Register offsets */ +#define US_CR 0x0000 +#define US_MR 0x0004 +#define US_IER 0x0008 +#define US_IDR 0x000c +#define US_IMR 0x0010 +#define US_CSR 0x0014 +#define US_RHR 0x0018 +#define US_THR 0x001c +#define US_BRGR 0x0020 +#define US_RTOR 0x0024 +#define US_TTGR 0x0028 + +#define US_FIDI 0x0040 +#define US_NER 0x0044 +#define US_XXR 0x0048 +#define US_IF 0x004c + +#define US_RPR 0x0100 +#define US_RCR 0x0104 +#define US_TPR 0x0108 +#define US_TCR 0x010c +#define US_RNPR 0x0110 +#define US_RNCR 0x0114 +#define US_TNPR 0x0118 +#define US_TNCR 0x011c +#define US_PTCR 0x0120 +#define US_PTSR 0x0124 + + + + +/* USART3 Control Register */ +#define US_CR_RSTRX (1 << 2) +#define US_CR_RSTTX (1 << 3) +#define US_CR_RXEN (1 << 4) +#define US_CR_RXDIS (1 << 5) +#define US_CR_TXEN (1 << 6) +#define US_CR_TXDIS (1 << 7) +#define US_CR_RSTSTA (1 << 8) +#define US_CR_STTBRK (1 << 9) +#define US_CR_STPBRK (1 << 10) + +#define US_CR_DTREN (1 << 16) +#define US_CR_DTRDIS (1 << 17) +#define US_CR_RTSEN (1 << 18) +#define US_CR_RTSDIS (1 << 19) + +/* USART3 Mode Register */ +#define US_MR_MODE (15 << 0) +#define US_MR_MODE_NORMAL ( 0 << 0) +#define US_MR_MODE_HWFLOW ( 2 << 0) +#define US_MR_CLKS ( 3 << 4) +#define US_MR_CLKS_CLOCK ( 0 << 4) +#define US_MR_CLKS_FDIV1 ( 1 << 4) +#define US_MR_CLKS_SLOW ( 2 << 4) +#define US_MR_CLKS_EXT ( 3 << 4) +#define US_MR_CHRL_5BITS ( 0 << 6) +#define US_MR_CHRL_6BITS ( 1 << 6) +#define US_MR_CHRL_7BITS ( 2 << 6) +#define US_MR_CHRL_8BITS ( 3 << 6) +#define US_MR_SYNC ( 1 << 8) +#define US_MR_PAR_EVEN ( 0 << 9) +#define US_MR_PAR_ODD ( 1 << 9) +#define US_MR_PAR_SPACE ( 2 << 9) +#define US_MR_PAR_MARK ( 3 << 9) +#define US_MR_PAR_NONE ( 4 << 9) +#define US_MR_PAR_MDROP ( 6 << 9) +#define US_MR_NBSTOP_1BIT ( 0 << 12) +#define US_MR_NBSTOP_1_5BIT ( 1 << 12) +#define US_MR_NBSTOP_2BITS ( 2 << 12) +#define US_MR_OVER ( 1 << 19) +#define US_MR_OVER_X16 ( 0 << 19) +#define US_MR_OVER_X8 ( 1 << 19) + +/* USART3 Channel Status Register */ +#define US_CSR_RXRDY (1 << 0) +#define US_CSR_TXRDY (1 << 1) +#define US_CSR_RXBRK (1 << 2) +#define US_CSR_ENDRX (1 << 3) +#define US_CSR_ENDTX (1 << 4) + + +#define US_CSR_OVRE (1 << 5) +#define US_CSR_FRAME (1 << 6) +#define US_CSR_PARE (1 << 7) + +#define US_CSR_TXEMPTY (1 << 9) + +#define US_CSR_TXBUFE (1 << 11) +#define US_CSR_RXBUFF (1 << 12) +#define US_CSR_RIIC (1 << 16) +#define US_CSR_DSRIC (1 << 17) +#define US_CSR_DCDIC (1 << 18) +#define US_CSR_CTSIC (1 << 19) +#define US_CSR_RI (1 << 20) +#define US_CSR_DSR (1 << 21) +#define US_CSR_DCD (1 << 22) +#define US_CSR_CTS (1 << 23) + +/* USART3 Baud Rate Generator Register */ +#define US_BRGR_CD_OFFSET 0 +#define US_BRGR_FP_OFFSET 16 + +#define US_BRGR_CD_SIZE 16 +#define US_BRGR_FP_SIZE 3 + +#define US_BRGR_CD (0xFFFF << 0) +#define US_BRGR_FP ( 7 << 16) + +/*USART3 PDC Transfer Control Register */ +#define US_PTCR_RXTEN (1 << 0) +#define US_PTCR_RXTDIS (1 << 1) +#define US_PTCR_TXTEN (1 << 8) +#define US_PTCR_TXTDIS (1 << 9) + +/*USART3 PDC Transfer Status Register */ +#define US_PTSR_RXTEN (1 << 0) +#define US_PTSR_TXTEN (1 << 8) + + +int usart_init(int baudrate); +void usart_putc(char c); +void usart_puts(const char *s); +int usart_getc(void); +int usart_tstc(void); +void usart_setbrg(int baudrate, int cpu_clock); +void set_usart_base(void *usart_base); + + +_END_STD_C + +#endif /* MERLIN_USART3_H */ diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR/mrepeat.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR/mrepeat.h new file mode 100644 index 0000000000..45be18486b --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR/mrepeat.h @@ -0,0 +1,328 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief Preprocessor macro repeating utils. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices can be used. + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef _MREPEAT_H_ +#define _MREPEAT_H_ + +#include "preprocessor.h" + + +//! Maximal number of repetitions supported by MREPEAT. +#define MREPEAT_LIMIT 256 + +/*! \brief Macro repeat. + * + * This macro represents a horizontal repetition construct. + * + * \param count The number of repetitious calls to macro. Valid values range from 0 to MREPEAT_LIMIT. + * \param macro A binary operation of the form macro(n, data). This macro is expanded by MREPEAT with + * the current repetition number and the auxiliary data argument. + * \param data Auxiliary data passed to macro. + * + * \return macro(0, data) macro(1, data) ... macro(count - 1, data) + */ +#define MREPEAT(count, macro, data) TPASTE2(MREPEAT, count)(macro, data) + +#define MREPEAT0( macro, data) +#define MREPEAT1( macro, data) MREPEAT0( macro, data) macro( 0, data) +#define MREPEAT2( macro, data) MREPEAT1( macro, data) macro( 1, data) +#define MREPEAT3( macro, data) MREPEAT2( macro, data) macro( 2, data) +#define MREPEAT4( macro, data) MREPEAT3( macro, data) macro( 3, data) +#define MREPEAT5( macro, data) MREPEAT4( macro, data) macro( 4, data) +#define MREPEAT6( macro, data) MREPEAT5( macro, data) macro( 5, data) +#define MREPEAT7( macro, data) MREPEAT6( macro, data) macro( 6, data) +#define MREPEAT8( macro, data) MREPEAT7( macro, data) macro( 7, data) +#define MREPEAT9( macro, data) MREPEAT8( macro, data) macro( 8, data) +#define MREPEAT10( macro, data) MREPEAT9( macro, data) macro( 9, data) +#define MREPEAT11( macro, data) MREPEAT10( macro, data) macro( 10, data) +#define MREPEAT12( macro, data) MREPEAT11( macro, data) macro( 11, data) +#define MREPEAT13( macro, data) MREPEAT12( macro, data) macro( 12, data) +#define MREPEAT14( macro, data) MREPEAT13( macro, data) macro( 13, data) +#define MREPEAT15( macro, data) MREPEAT14( macro, data) macro( 14, data) +#define MREPEAT16( macro, data) MREPEAT15( macro, data) macro( 15, data) +#define MREPEAT17( macro, data) MREPEAT16( macro, data) macro( 16, data) +#define MREPEAT18( macro, data) MREPEAT17( macro, data) macro( 17, data) +#define MREPEAT19( macro, data) MREPEAT18( macro, data) macro( 18, data) +#define MREPEAT20( macro, data) MREPEAT19( macro, data) macro( 19, data) +#define MREPEAT21( macro, data) MREPEAT20( macro, data) macro( 20, data) +#define MREPEAT22( macro, data) MREPEAT21( macro, data) macro( 21, data) +#define MREPEAT23( macro, data) MREPEAT22( macro, data) macro( 22, data) +#define MREPEAT24( macro, data) MREPEAT23( macro, data) macro( 23, data) +#define MREPEAT25( macro, data) MREPEAT24( macro, data) macro( 24, data) +#define MREPEAT26( macro, data) MREPEAT25( macro, data) macro( 25, data) +#define MREPEAT27( macro, data) MREPEAT26( macro, data) macro( 26, data) +#define MREPEAT28( macro, data) MREPEAT27( macro, data) macro( 27, data) +#define MREPEAT29( macro, data) MREPEAT28( macro, data) macro( 28, data) +#define MREPEAT30( macro, data) MREPEAT29( macro, data) macro( 29, data) +#define MREPEAT31( macro, data) MREPEAT30( macro, data) macro( 30, data) +#define MREPEAT32( macro, data) MREPEAT31( macro, data) macro( 31, data) +#define MREPEAT33( macro, data) MREPEAT32( macro, data) macro( 32, data) +#define MREPEAT34( macro, data) MREPEAT33( macro, data) macro( 33, data) +#define MREPEAT35( macro, data) MREPEAT34( macro, data) macro( 34, data) +#define MREPEAT36( macro, data) MREPEAT35( macro, data) macro( 35, data) +#define MREPEAT37( macro, data) MREPEAT36( macro, data) macro( 36, data) +#define MREPEAT38( macro, data) MREPEAT37( macro, data) macro( 37, data) +#define MREPEAT39( macro, data) MREPEAT38( macro, data) macro( 38, data) +#define MREPEAT40( macro, data) MREPEAT39( macro, data) macro( 39, data) +#define MREPEAT41( macro, data) MREPEAT40( macro, data) macro( 40, data) +#define MREPEAT42( macro, data) MREPEAT41( macro, data) macro( 41, data) +#define MREPEAT43( macro, data) MREPEAT42( macro, data) macro( 42, data) +#define MREPEAT44( macro, data) MREPEAT43( macro, data) macro( 43, data) +#define MREPEAT45( macro, data) MREPEAT44( macro, data) macro( 44, data) +#define MREPEAT46( macro, data) MREPEAT45( macro, data) macro( 45, data) +#define MREPEAT47( macro, data) MREPEAT46( macro, data) macro( 46, data) +#define MREPEAT48( macro, data) MREPEAT47( macro, data) macro( 47, data) +#define MREPEAT49( macro, data) MREPEAT48( macro, data) macro( 48, data) +#define MREPEAT50( macro, data) MREPEAT49( macro, data) macro( 49, data) +#define MREPEAT51( macro, data) MREPEAT50( macro, data) macro( 50, data) +#define MREPEAT52( macro, data) MREPEAT51( macro, data) macro( 51, data) +#define MREPEAT53( macro, data) MREPEAT52( macro, data) macro( 52, data) +#define MREPEAT54( macro, data) MREPEAT53( macro, data) macro( 53, data) +#define MREPEAT55( macro, data) MREPEAT54( macro, data) macro( 54, data) +#define MREPEAT56( macro, data) MREPEAT55( macro, data) macro( 55, data) +#define MREPEAT57( macro, data) MREPEAT56( macro, data) macro( 56, data) +#define MREPEAT58( macro, data) MREPEAT57( macro, data) macro( 57, data) +#define MREPEAT59( macro, data) MREPEAT58( macro, data) macro( 58, data) +#define MREPEAT60( macro, data) MREPEAT59( macro, data) macro( 59, data) +#define MREPEAT61( macro, data) MREPEAT60( macro, data) macro( 60, data) +#define MREPEAT62( macro, data) MREPEAT61( macro, data) macro( 61, data) +#define MREPEAT63( macro, data) MREPEAT62( macro, data) macro( 62, data) +#define MREPEAT64( macro, data) MREPEAT63( macro, data) macro( 63, data) +#define MREPEAT65( macro, data) MREPEAT64( macro, data) macro( 64, data) +#define MREPEAT66( macro, data) MREPEAT65( macro, data) macro( 65, data) +#define MREPEAT67( macro, data) MREPEAT66( macro, data) macro( 66, data) +#define MREPEAT68( macro, data) MREPEAT67( macro, data) macro( 67, data) +#define MREPEAT69( macro, data) MREPEAT68( macro, data) macro( 68, data) +#define MREPEAT70( macro, data) MREPEAT69( macro, data) macro( 69, data) +#define MREPEAT71( macro, data) MREPEAT70( macro, data) macro( 70, data) +#define MREPEAT72( macro, data) MREPEAT71( macro, data) macro( 71, data) +#define MREPEAT73( macro, data) MREPEAT72( macro, data) macro( 72, data) +#define MREPEAT74( macro, data) MREPEAT73( macro, data) macro( 73, data) +#define MREPEAT75( macro, data) MREPEAT74( macro, data) macro( 74, data) +#define MREPEAT76( macro, data) MREPEAT75( macro, data) macro( 75, data) +#define MREPEAT77( macro, data) MREPEAT76( macro, data) macro( 76, data) +#define MREPEAT78( macro, data) MREPEAT77( macro, data) macro( 77, data) +#define MREPEAT79( macro, data) MREPEAT78( macro, data) macro( 78, data) +#define MREPEAT80( macro, data) MREPEAT79( macro, data) macro( 79, data) +#define MREPEAT81( macro, data) MREPEAT80( macro, data) macro( 80, data) +#define MREPEAT82( macro, data) MREPEAT81( macro, data) macro( 81, data) +#define MREPEAT83( macro, data) MREPEAT82( macro, data) macro( 82, data) +#define MREPEAT84( macro, data) MREPEAT83( macro, data) macro( 83, data) +#define MREPEAT85( macro, data) MREPEAT84( macro, data) macro( 84, data) +#define MREPEAT86( macro, data) MREPEAT85( macro, data) macro( 85, data) +#define MREPEAT87( macro, data) MREPEAT86( macro, data) macro( 86, data) +#define MREPEAT88( macro, data) MREPEAT87( macro, data) macro( 87, data) +#define MREPEAT89( macro, data) MREPEAT88( macro, data) macro( 88, data) +#define MREPEAT90( macro, data) MREPEAT89( macro, data) macro( 89, data) +#define MREPEAT91( macro, data) MREPEAT90( macro, data) macro( 90, data) +#define MREPEAT92( macro, data) MREPEAT91( macro, data) macro( 91, data) +#define MREPEAT93( macro, data) MREPEAT92( macro, data) macro( 92, data) +#define MREPEAT94( macro, data) MREPEAT93( macro, data) macro( 93, data) +#define MREPEAT95( macro, data) MREPEAT94( macro, data) macro( 94, data) +#define MREPEAT96( macro, data) MREPEAT95( macro, data) macro( 95, data) +#define MREPEAT97( macro, data) MREPEAT96( macro, data) macro( 96, data) +#define MREPEAT98( macro, data) MREPEAT97( macro, data) macro( 97, data) +#define MREPEAT99( macro, data) MREPEAT98( macro, data) macro( 98, data) +#define MREPEAT100(macro, data) MREPEAT99( macro, data) macro( 99, data) +#define MREPEAT101(macro, data) MREPEAT100(macro, data) macro(100, data) +#define MREPEAT102(macro, data) MREPEAT101(macro, data) macro(101, data) +#define MREPEAT103(macro, data) MREPEAT102(macro, data) macro(102, data) +#define MREPEAT104(macro, data) MREPEAT103(macro, data) macro(103, data) +#define MREPEAT105(macro, data) MREPEAT104(macro, data) macro(104, data) +#define MREPEAT106(macro, data) MREPEAT105(macro, data) macro(105, data) +#define MREPEAT107(macro, data) MREPEAT106(macro, data) macro(106, data) +#define MREPEAT108(macro, data) MREPEAT107(macro, data) macro(107, data) +#define MREPEAT109(macro, data) MREPEAT108(macro, data) macro(108, data) +#define MREPEAT110(macro, data) MREPEAT109(macro, data) macro(109, data) +#define MREPEAT111(macro, data) MREPEAT110(macro, data) macro(110, data) +#define MREPEAT112(macro, data) MREPEAT111(macro, data) macro(111, data) +#define MREPEAT113(macro, data) MREPEAT112(macro, data) macro(112, data) +#define MREPEAT114(macro, data) MREPEAT113(macro, data) macro(113, data) +#define MREPEAT115(macro, data) MREPEAT114(macro, data) macro(114, data) +#define MREPEAT116(macro, data) MREPEAT115(macro, data) macro(115, data) +#define MREPEAT117(macro, data) MREPEAT116(macro, data) macro(116, data) +#define MREPEAT118(macro, data) MREPEAT117(macro, data) macro(117, data) +#define MREPEAT119(macro, data) MREPEAT118(macro, data) macro(118, data) +#define MREPEAT120(macro, data) MREPEAT119(macro, data) macro(119, data) +#define MREPEAT121(macro, data) MREPEAT120(macro, data) macro(120, data) +#define MREPEAT122(macro, data) MREPEAT121(macro, data) macro(121, data) +#define MREPEAT123(macro, data) MREPEAT122(macro, data) macro(122, data) +#define MREPEAT124(macro, data) MREPEAT123(macro, data) macro(123, data) +#define MREPEAT125(macro, data) MREPEAT124(macro, data) macro(124, data) +#define MREPEAT126(macro, data) MREPEAT125(macro, data) macro(125, data) +#define MREPEAT127(macro, data) MREPEAT126(macro, data) macro(126, data) +#define MREPEAT128(macro, data) MREPEAT127(macro, data) macro(127, data) +#define MREPEAT129(macro, data) MREPEAT128(macro, data) macro(128, data) +#define MREPEAT130(macro, data) MREPEAT129(macro, data) macro(129, data) +#define MREPEAT131(macro, data) MREPEAT130(macro, data) macro(130, data) +#define MREPEAT132(macro, data) MREPEAT131(macro, data) macro(131, data) +#define MREPEAT133(macro, data) MREPEAT132(macro, data) macro(132, data) +#define MREPEAT134(macro, data) MREPEAT133(macro, data) macro(133, data) +#define MREPEAT135(macro, data) MREPEAT134(macro, data) macro(134, data) +#define MREPEAT136(macro, data) MREPEAT135(macro, data) macro(135, data) +#define MREPEAT137(macro, data) MREPEAT136(macro, data) macro(136, data) +#define MREPEAT138(macro, data) MREPEAT137(macro, data) macro(137, data) +#define MREPEAT139(macro, data) MREPEAT138(macro, data) macro(138, data) +#define MREPEAT140(macro, data) MREPEAT139(macro, data) macro(139, data) +#define MREPEAT141(macro, data) MREPEAT140(macro, data) macro(140, data) +#define MREPEAT142(macro, data) MREPEAT141(macro, data) macro(141, data) +#define MREPEAT143(macro, data) MREPEAT142(macro, data) macro(142, data) +#define MREPEAT144(macro, data) MREPEAT143(macro, data) macro(143, data) +#define MREPEAT145(macro, data) MREPEAT144(macro, data) macro(144, data) +#define MREPEAT146(macro, data) MREPEAT145(macro, data) macro(145, data) +#define MREPEAT147(macro, data) MREPEAT146(macro, data) macro(146, data) +#define MREPEAT148(macro, data) MREPEAT147(macro, data) macro(147, data) +#define MREPEAT149(macro, data) MREPEAT148(macro, data) macro(148, data) +#define MREPEAT150(macro, data) MREPEAT149(macro, data) macro(149, data) +#define MREPEAT151(macro, data) MREPEAT150(macro, data) macro(150, data) +#define MREPEAT152(macro, data) MREPEAT151(macro, data) macro(151, data) +#define MREPEAT153(macro, data) MREPEAT152(macro, data) macro(152, data) +#define MREPEAT154(macro, data) MREPEAT153(macro, data) macro(153, data) +#define MREPEAT155(macro, data) MREPEAT154(macro, data) macro(154, data) +#define MREPEAT156(macro, data) MREPEAT155(macro, data) macro(155, data) +#define MREPEAT157(macro, data) MREPEAT156(macro, data) macro(156, data) +#define MREPEAT158(macro, data) MREPEAT157(macro, data) macro(157, data) +#define MREPEAT159(macro, data) MREPEAT158(macro, data) macro(158, data) +#define MREPEAT160(macro, data) MREPEAT159(macro, data) macro(159, data) +#define MREPEAT161(macro, data) MREPEAT160(macro, data) macro(160, data) +#define MREPEAT162(macro, data) MREPEAT161(macro, data) macro(161, data) +#define MREPEAT163(macro, data) MREPEAT162(macro, data) macro(162, data) +#define MREPEAT164(macro, data) MREPEAT163(macro, data) macro(163, data) +#define MREPEAT165(macro, data) MREPEAT164(macro, data) macro(164, data) +#define MREPEAT166(macro, data) MREPEAT165(macro, data) macro(165, data) +#define MREPEAT167(macro, data) MREPEAT166(macro, data) macro(166, data) +#define MREPEAT168(macro, data) MREPEAT167(macro, data) macro(167, data) +#define MREPEAT169(macro, data) MREPEAT168(macro, data) macro(168, data) +#define MREPEAT170(macro, data) MREPEAT169(macro, data) macro(169, data) +#define MREPEAT171(macro, data) MREPEAT170(macro, data) macro(170, data) +#define MREPEAT172(macro, data) MREPEAT171(macro, data) macro(171, data) +#define MREPEAT173(macro, data) MREPEAT172(macro, data) macro(172, data) +#define MREPEAT174(macro, data) MREPEAT173(macro, data) macro(173, data) +#define MREPEAT175(macro, data) MREPEAT174(macro, data) macro(174, data) +#define MREPEAT176(macro, data) MREPEAT175(macro, data) macro(175, data) +#define MREPEAT177(macro, data) MREPEAT176(macro, data) macro(176, data) +#define MREPEAT178(macro, data) MREPEAT177(macro, data) macro(177, data) +#define MREPEAT179(macro, data) MREPEAT178(macro, data) macro(178, data) +#define MREPEAT180(macro, data) MREPEAT179(macro, data) macro(179, data) +#define MREPEAT181(macro, data) MREPEAT180(macro, data) macro(180, data) +#define MREPEAT182(macro, data) MREPEAT181(macro, data) macro(181, data) +#define MREPEAT183(macro, data) MREPEAT182(macro, data) macro(182, data) +#define MREPEAT184(macro, data) MREPEAT183(macro, data) macro(183, data) +#define MREPEAT185(macro, data) MREPEAT184(macro, data) macro(184, data) +#define MREPEAT186(macro, data) MREPEAT185(macro, data) macro(185, data) +#define MREPEAT187(macro, data) MREPEAT186(macro, data) macro(186, data) +#define MREPEAT188(macro, data) MREPEAT187(macro, data) macro(187, data) +#define MREPEAT189(macro, data) MREPEAT188(macro, data) macro(188, data) +#define MREPEAT190(macro, data) MREPEAT189(macro, data) macro(189, data) +#define MREPEAT191(macro, data) MREPEAT190(macro, data) macro(190, data) +#define MREPEAT192(macro, data) MREPEAT191(macro, data) macro(191, data) +#define MREPEAT193(macro, data) MREPEAT192(macro, data) macro(192, data) +#define MREPEAT194(macro, data) MREPEAT193(macro, data) macro(193, data) +#define MREPEAT195(macro, data) MREPEAT194(macro, data) macro(194, data) +#define MREPEAT196(macro, data) MREPEAT195(macro, data) macro(195, data) +#define MREPEAT197(macro, data) MREPEAT196(macro, data) macro(196, data) +#define MREPEAT198(macro, data) MREPEAT197(macro, data) macro(197, data) +#define MREPEAT199(macro, data) MREPEAT198(macro, data) macro(198, data) +#define MREPEAT200(macro, data) MREPEAT199(macro, data) macro(199, data) +#define MREPEAT201(macro, data) MREPEAT200(macro, data) macro(200, data) +#define MREPEAT202(macro, data) MREPEAT201(macro, data) macro(201, data) +#define MREPEAT203(macro, data) MREPEAT202(macro, data) macro(202, data) +#define MREPEAT204(macro, data) MREPEAT203(macro, data) macro(203, data) +#define MREPEAT205(macro, data) MREPEAT204(macro, data) macro(204, data) +#define MREPEAT206(macro, data) MREPEAT205(macro, data) macro(205, data) +#define MREPEAT207(macro, data) MREPEAT206(macro, data) macro(206, data) +#define MREPEAT208(macro, data) MREPEAT207(macro, data) macro(207, data) +#define MREPEAT209(macro, data) MREPEAT208(macro, data) macro(208, data) +#define MREPEAT210(macro, data) MREPEAT209(macro, data) macro(209, data) +#define MREPEAT211(macro, data) MREPEAT210(macro, data) macro(210, data) +#define MREPEAT212(macro, data) MREPEAT211(macro, data) macro(211, data) +#define MREPEAT213(macro, data) MREPEAT212(macro, data) macro(212, data) +#define MREPEAT214(macro, data) MREPEAT213(macro, data) macro(213, data) +#define MREPEAT215(macro, data) MREPEAT214(macro, data) macro(214, data) +#define MREPEAT216(macro, data) MREPEAT215(macro, data) macro(215, data) +#define MREPEAT217(macro, data) MREPEAT216(macro, data) macro(216, data) +#define MREPEAT218(macro, data) MREPEAT217(macro, data) macro(217, data) +#define MREPEAT219(macro, data) MREPEAT218(macro, data) macro(218, data) +#define MREPEAT220(macro, data) MREPEAT219(macro, data) macro(219, data) +#define MREPEAT221(macro, data) MREPEAT220(macro, data) macro(220, data) +#define MREPEAT222(macro, data) MREPEAT221(macro, data) macro(221, data) +#define MREPEAT223(macro, data) MREPEAT222(macro, data) macro(222, data) +#define MREPEAT224(macro, data) MREPEAT223(macro, data) macro(223, data) +#define MREPEAT225(macro, data) MREPEAT224(macro, data) macro(224, data) +#define MREPEAT226(macro, data) MREPEAT225(macro, data) macro(225, data) +#define MREPEAT227(macro, data) MREPEAT226(macro, data) macro(226, data) +#define MREPEAT228(macro, data) MREPEAT227(macro, data) macro(227, data) +#define MREPEAT229(macro, data) MREPEAT228(macro, data) macro(228, data) +#define MREPEAT230(macro, data) MREPEAT229(macro, data) macro(229, data) +#define MREPEAT231(macro, data) MREPEAT230(macro, data) macro(230, data) +#define MREPEAT232(macro, data) MREPEAT231(macro, data) macro(231, data) +#define MREPEAT233(macro, data) MREPEAT232(macro, data) macro(232, data) +#define MREPEAT234(macro, data) MREPEAT233(macro, data) macro(233, data) +#define MREPEAT235(macro, data) MREPEAT234(macro, data) macro(234, data) +#define MREPEAT236(macro, data) MREPEAT235(macro, data) macro(235, data) +#define MREPEAT237(macro, data) MREPEAT236(macro, data) macro(236, data) +#define MREPEAT238(macro, data) MREPEAT237(macro, data) macro(237, data) +#define MREPEAT239(macro, data) MREPEAT238(macro, data) macro(238, data) +#define MREPEAT240(macro, data) MREPEAT239(macro, data) macro(239, data) +#define MREPEAT241(macro, data) MREPEAT240(macro, data) macro(240, data) +#define MREPEAT242(macro, data) MREPEAT241(macro, data) macro(241, data) +#define MREPEAT243(macro, data) MREPEAT242(macro, data) macro(242, data) +#define MREPEAT244(macro, data) MREPEAT243(macro, data) macro(243, data) +#define MREPEAT245(macro, data) MREPEAT244(macro, data) macro(244, data) +#define MREPEAT246(macro, data) MREPEAT245(macro, data) macro(245, data) +#define MREPEAT247(macro, data) MREPEAT246(macro, data) macro(246, data) +#define MREPEAT248(macro, data) MREPEAT247(macro, data) macro(247, data) +#define MREPEAT249(macro, data) MREPEAT248(macro, data) macro(248, data) +#define MREPEAT250(macro, data) MREPEAT249(macro, data) macro(249, data) +#define MREPEAT251(macro, data) MREPEAT250(macro, data) macro(250, data) +#define MREPEAT252(macro, data) MREPEAT251(macro, data) macro(251, data) +#define MREPEAT253(macro, data) MREPEAT252(macro, data) macro(252, data) +#define MREPEAT254(macro, data) MREPEAT253(macro, data) macro(253, data) +#define MREPEAT255(macro, data) MREPEAT254(macro, data) macro(254, data) +#define MREPEAT256(macro, data) MREPEAT255(macro, data) macro(255, data) + + +#endif // _MREPEAT_H_ diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR/preprocessor.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR/preprocessor.h new file mode 100644 index 0000000000..adf8e1d433 --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR/preprocessor.h @@ -0,0 +1,55 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief Preprocessor utils. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices can be used. + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef _PREPROCESSOR_H_ +#define _PREPROCESSOR_H_ + +#include "tpaste.h" +#include "stringz.h" +#include "mrepeat.h" + + +#endif // _PREPROCESSOR_H_ diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR/stringz.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR/stringz.h new file mode 100644 index 0000000000..153e07fdeb --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR/stringz.h @@ -0,0 +1,75 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief Preprocessor stringizing utils. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices can be used. + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef _STRINGZ_H_ +#define _STRINGZ_H_ + + +/*! \brief Stringize. + * + * Stringize a preprocessing token, this token being allowed to be \#defined. + * + * May be used only within macros with the token passed as an argument if the token is \#defined. + * + * For example, writing STRINGZ(PIN) within a macro \#defined by PIN_NAME(PIN) + * and invoked as PIN_NAME(PIN0) with PIN0 \#defined as A0 is equivalent to + * writing "A0". + */ +#define STRINGZ(x) #x + +/*! \brief Absolute stringize. + * + * Stringize a preprocessing token, this token being allowed to be \#defined. + * + * No restriction of use if the token is \#defined. + * + * For example, writing ASTRINGZ(PIN0) anywhere with PIN0 \#defined as A0 is + * equivalent to writing "A0". + */ +#define ASTRINGZ(x) STRINGZ(x) + + +#endif // _STRINGZ_H_ diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR/tpaste.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR/tpaste.h new file mode 100644 index 0000000000..cc46a5d6fa --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR/tpaste.h @@ -0,0 +1,95 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief Preprocessor token pasting utils. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices can be used. + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef _TPASTE_H_ +#define _TPASTE_H_ + + +/*! \name Token Paste + * + * Paste N preprocessing tokens together, these tokens being allowed to be \#defined. + * + * May be used only within macros with the tokens passed as arguments if the tokens are \#defined. + * + * For example, writing TPASTE2(U, WIDTH) within a macro \#defined by + * UTYPE(WIDTH) and invoked as UTYPE(UL_WIDTH) with UL_WIDTH \#defined as 32 is + * equivalent to writing U32. + */ +//! @{ +#define TPASTE2( a, b) a##b +#define TPASTE3( a, b, c) a##b##c +#define TPASTE4( a, b, c, d) a##b##c##d +#define TPASTE5( a, b, c, d, e) a##b##c##d##e +#define TPASTE6( a, b, c, d, e, f) a##b##c##d##e##f +#define TPASTE7( a, b, c, d, e, f, g) a##b##c##d##e##f##g +#define TPASTE8( a, b, c, d, e, f, g, h) a##b##c##d##e##f##g##h +#define TPASTE9( a, b, c, d, e, f, g, h, i) a##b##c##d##e##f##g##h##i +#define TPASTE10(a, b, c, d, e, f, g, h, i, j) a##b##c##d##e##f##g##h##i##j +//! @} + +/*! \name Absolute Token Paste + * + * Paste N preprocessing tokens together, these tokens being allowed to be \#defined. + * + * No restriction of use if the tokens are \#defined. + * + * For example, writing ATPASTE2(U, UL_WIDTH) anywhere with UL_WIDTH \#defined + * as 32 is equivalent to writing U32. + */ +//! @{ +#define ATPASTE2( a, b) TPASTE2( a, b) +#define ATPASTE3( a, b, c) TPASTE3( a, b, c) +#define ATPASTE4( a, b, c, d) TPASTE4( a, b, c, d) +#define ATPASTE5( a, b, c, d, e) TPASTE5( a, b, c, d, e) +#define ATPASTE6( a, b, c, d, e, f) TPASTE6( a, b, c, d, e, f) +#define ATPASTE7( a, b, c, d, e, f, g) TPASTE7( a, b, c, d, e, f, g) +#define ATPASTE8( a, b, c, d, e, f, g, h) TPASTE8( a, b, c, d, e, f, g, h) +#define ATPASTE9( a, b, c, d, e, f, g, h, i) TPASTE9( a, b, c, d, e, f, g, h, i) +#define ATPASTE10(a, b, c, d, e, f, g, h, i, j) TPASTE10(a, b, c, d, e, f, g, h, i, j) +//! @} + + +#endif // _TPASTE_H_ diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/compiler.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/compiler.h new file mode 100644 index 0000000000..655e1bc47c --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/compiler.h @@ -0,0 +1,1145 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief Compiler file for AVR32. + * + * This file defines commonly used types and macros. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef _COMPILER_H_ +#define _COMPILER_H_ + +#if ((defined __GNUC__) && (defined __AVR32__)) || (defined __ICCAVR32__ || defined __AAVR32__) +# include +#endif +#if (defined __ICCAVR32__) +# include +#endif +#include "preprocessor.h" + +#include "parts.h" + + +//_____ D E C L A R A T I O N S ____________________________________________ + +#ifdef __AVR32_ABI_COMPILER__ // Automatically defined when compiling for AVR32, not when assembling. + +#include +#include + + +#if (defined __ICCAVR32__) + +/*! \name Compiler Keywords + * + * Port of some keywords from GNU GCC for AVR32 to IAR Embedded Workbench for Atmel AVR32. + */ +//! @{ +#define __asm__ asm +#define __inline__ inline +#define __volatile__ +//! @} + +#endif + + +/*! \name Usual Types + */ +//! @{ +typedef unsigned char Bool; //!< Boolean. +#ifndef __cplusplus +#if !defined(__bool_true_false_are_defined) +typedef unsigned char bool; //!< Boolean. +#endif +#endif +typedef signed char S8 ; //!< 8-bit signed integer. +typedef unsigned char U8 ; //!< 8-bit unsigned integer. +typedef signed short int S16; //!< 16-bit signed integer. +typedef unsigned short int U16; //!< 16-bit unsigned integer. +typedef signed long int S32; //!< 32-bit signed integer. +typedef unsigned long int U32; //!< 32-bit unsigned integer. +typedef signed long long int S64; //!< 64-bit signed integer. +typedef unsigned long long int U64; //!< 64-bit unsigned integer. +typedef float F32; //!< 32-bit floating-point number. +typedef double F64; //!< 64-bit floating-point number. +//! @} + + +/*! \name Status Types + */ +//! @{ +typedef Bool Status_bool_t; //!< Boolean status. +typedef U8 Status_t; //!< 8-bit-coded status. +//! @} + + +/*! \name Aliasing Aggregate Types + */ +//! @{ + +//! 16-bit union. +typedef union +{ + S16 s16 ; + U16 u16 ; + S8 s8 [2]; + U8 u8 [2]; +} Union16; + +//! 32-bit union. +typedef union +{ + S32 s32 ; + U32 u32 ; + S16 s16[2]; + U16 u16[2]; + S8 s8 [4]; + U8 u8 [4]; +} Union32; + +//! 64-bit union. +typedef union +{ + S64 s64 ; + U64 u64 ; + S32 s32[2]; + U32 u32[2]; + S16 s16[4]; + U16 u16[4]; + S8 s8 [8]; + U8 u8 [8]; +} Union64; + +//! Union of pointers to 64-, 32-, 16- and 8-bit unsigned integers. +typedef union +{ + S64 *s64ptr; + U64 *u64ptr; + S32 *s32ptr; + U32 *u32ptr; + S16 *s16ptr; + U16 *u16ptr; + S8 *s8ptr ; + U8 *u8ptr ; +} UnionPtr; + +//! Union of pointers to volatile 64-, 32-, 16- and 8-bit unsigned integers. +typedef union +{ + volatile S64 *s64ptr; + volatile U64 *u64ptr; + volatile S32 *s32ptr; + volatile U32 *u32ptr; + volatile S16 *s16ptr; + volatile U16 *u16ptr; + volatile S8 *s8ptr ; + volatile U8 *u8ptr ; +} UnionVPtr; + +//! Union of pointers to constant 64-, 32-, 16- and 8-bit unsigned integers. +typedef union +{ + const S64 *s64ptr; + const U64 *u64ptr; + const S32 *s32ptr; + const U32 *u32ptr; + const S16 *s16ptr; + const U16 *u16ptr; + const S8 *s8ptr ; + const U8 *u8ptr ; +} UnionCPtr; + +//! Union of pointers to constant volatile 64-, 32-, 16- and 8-bit unsigned integers. +typedef union +{ + const volatile S64 *s64ptr; + const volatile U64 *u64ptr; + const volatile S32 *s32ptr; + const volatile U32 *u32ptr; + const volatile S16 *s16ptr; + const volatile U16 *u16ptr; + const volatile S8 *s8ptr ; + const volatile U8 *u8ptr ; +} UnionCVPtr; + +//! Structure of pointers to 64-, 32-, 16- and 8-bit unsigned integers. +typedef struct +{ + S64 *s64ptr; + U64 *u64ptr; + S32 *s32ptr; + U32 *u32ptr; + S16 *s16ptr; + U16 *u16ptr; + S8 *s8ptr ; + U8 *u8ptr ; +} StructPtr; + +//! Structure of pointers to volatile 64-, 32-, 16- and 8-bit unsigned integers. +typedef struct +{ + volatile S64 *s64ptr; + volatile U64 *u64ptr; + volatile S32 *s32ptr; + volatile U32 *u32ptr; + volatile S16 *s16ptr; + volatile U16 *u16ptr; + volatile S8 *s8ptr ; + volatile U8 *u8ptr ; +} StructVPtr; + +//! Structure of pointers to constant 64-, 32-, 16- and 8-bit unsigned integers. +typedef struct +{ + const S64 *s64ptr; + const U64 *u64ptr; + const S32 *s32ptr; + const U32 *u32ptr; + const S16 *s16ptr; + const U16 *u16ptr; + const S8 *s8ptr ; + const U8 *u8ptr ; +} StructCPtr; + +//! Structure of pointers to constant volatile 64-, 32-, 16- and 8-bit unsigned integers. +typedef struct +{ + const volatile S64 *s64ptr; + const volatile U64 *u64ptr; + const volatile S32 *s32ptr; + const volatile U32 *u32ptr; + const volatile S16 *s16ptr; + const volatile U16 *u16ptr; + const volatile S8 *s8ptr ; + const volatile U8 *u8ptr ; +} StructCVPtr; + +//! @} + +#endif // __AVR32_ABI_COMPILER__ + + +//_____ M A C R O S ________________________________________________________ + +/*! \name Usual Constants + */ +//! @{ +#define DISABLE 0 +#define ENABLE 1 +#define DISABLED 0 +#define ENABLED 1 +#define OFF 0 +#define ON 1 +#define FALSE 0 +#define TRUE 1 +#ifndef __cplusplus +#if !defined(__bool_true_false_are_defined) +#define false FALSE +#define true TRUE +#endif +#endif +#define KO 0 +#define OK 1 +#define PASS 0 +#define FAIL 1 +#define LOW 0 +#define HIGH 1 +#define CLR 0 +#define SET 1 +//! @} + + +#ifdef __AVR32_ABI_COMPILER__ // Automatically defined when compiling for AVR32, not when assembling. + +/*! \name Bit-Field Handling + */ +//! @{ + +/*! \brief Reads the bits of a value specified by a given bit-mask. + * + * \param value Value to read bits from. + * \param mask Bit-mask indicating bits to read. + * + * \return Read bits. + */ +#define Rd_bits( value, mask) ((value) & (mask)) + +/*! \brief Writes the bits of a C lvalue specified by a given bit-mask. + * + * \param lvalue C lvalue to write bits to. + * \param mask Bit-mask indicating bits to write. + * \param bits Bits to write. + * + * \return Resulting value with written bits. + */ +#define Wr_bits(lvalue, mask, bits) ((lvalue) = ((lvalue) & ~(mask)) |\ + ((bits ) & (mask))) + +/*! \brief Tests the bits of a value specified by a given bit-mask. + * + * \param value Value of which to test bits. + * \param mask Bit-mask indicating bits to test. + * + * \return \c 1 if at least one of the tested bits is set, else \c 0. + */ +#define Tst_bits( value, mask) (Rd_bits(value, mask) != 0) + +/*! \brief Clears the bits of a C lvalue specified by a given bit-mask. + * + * \param lvalue C lvalue of which to clear bits. + * \param mask Bit-mask indicating bits to clear. + * + * \return Resulting value with cleared bits. + */ +#define Clr_bits(lvalue, mask) ((lvalue) &= ~(mask)) + +/*! \brief Sets the bits of a C lvalue specified by a given bit-mask. + * + * \param lvalue C lvalue of which to set bits. + * \param mask Bit-mask indicating bits to set. + * + * \return Resulting value with set bits. + */ +#define Set_bits(lvalue, mask) ((lvalue) |= (mask)) + +/*! \brief Toggles the bits of a C lvalue specified by a given bit-mask. + * + * \param lvalue C lvalue of which to toggle bits. + * \param mask Bit-mask indicating bits to toggle. + * + * \return Resulting value with toggled bits. + */ +#define Tgl_bits(lvalue, mask) ((lvalue) ^= (mask)) + +/*! \brief Reads the bit-field of a value specified by a given bit-mask. + * + * \param value Value to read a bit-field from. + * \param mask Bit-mask indicating the bit-field to read. + * + * \return Read bit-field. + */ +#define Rd_bitfield( value, mask) (Rd_bits( value, mask) >> ctz(mask)) + +/*! \brief Writes the bit-field of a C lvalue specified by a given bit-mask. + * + * \param lvalue C lvalue to write a bit-field to. + * \param mask Bit-mask indicating the bit-field to write. + * \param bitfield Bit-field to write. + * + * \return Resulting value with written bit-field. + */ +#define Wr_bitfield(lvalue, mask, bitfield) (Wr_bits(lvalue, mask, (U32)(bitfield) << ctz(mask))) + +//! @} + + +/*! \brief This macro is used to test fatal errors. + * + * The macro tests if the expression is FALSE. If it is, a fatal error is + * detected and the application hangs up. + * + * \param expr Expression to evaluate and supposed to be nonzero. + */ +#ifdef _ASSERT_ENABLE_ + #define Assert(expr) \ + {\ + if (!(expr)) while (TRUE);\ + } +#else + #define Assert(expr) +#endif + + +/*! \name Zero-Bit Counting + * + * Under AVR32-GCC, __builtin_clz and __builtin_ctz behave like macros when + * applied to constant expressions (values known at compile time), so they are + * more optimized than the use of the corresponding assembly instructions and + * they can be used as constant expressions e.g. to initialize objects having + * static storage duration, and like the corresponding assembly instructions + * when applied to non-constant expressions (values unknown at compile time), so + * they are more optimized than an assembly periphrasis. Hence, clz and ctz + * ensure a possible and optimized behavior for both constant and non-constant + * expressions. + */ +//! @{ + +/*! \brief Counts the leading zero bits of the given value considered as a 32-bit integer. + * + * \param u Value of which to count the leading zero bits. + * + * \return The count of leading zero bits in \a u. + */ +#if (defined __GNUC__) + #define clz(u) __builtin_clz(u) +#elif (defined __ICCAVR32__) + #define clz(u) __count_leading_zeros(u) +#endif + +/*! \brief Counts the trailing zero bits of the given value considered as a 32-bit integer. + * + * \param u Value of which to count the trailing zero bits. + * + * \return The count of trailing zero bits in \a u. + */ +#if (defined __GNUC__) + #define ctz(u) __builtin_ctz(u) +#elif (defined __ICCAVR32__) + #define ctz(u) __count_trailing_zeros(u) +#endif + +//! @} + + +/*! \name Bit Reversing + */ +//! @{ + +/*! \brief Reverses the bits of \a u8. + * + * \param u8 U8 of which to reverse the bits. + * + * \return Value resulting from \a u8 with reversed bits. + */ +#define bit_reverse8(u8) ((U8)(bit_reverse32((U8)(u8)) >> 24)) + +/*! \brief Reverses the bits of \a u16. + * + * \param u16 U16 of which to reverse the bits. + * + * \return Value resulting from \a u16 with reversed bits. + */ +#define bit_reverse16(u16) ((U16)(bit_reverse32((U16)(u16)) >> 16)) + +/*! \brief Reverses the bits of \a u32. + * + * \param u32 U32 of which to reverse the bits. + * + * \return Value resulting from \a u32 with reversed bits. + */ +#if (defined __GNUC__) + #define bit_reverse32(u32) \ + (\ + {\ + unsigned int __value = (U32)(u32);\ + __asm__ ("brev\t%0" : "+r" (__value) : : "cc");\ + (U32)__value;\ + }\ + ) +#elif (defined __ICCAVR32__) + #define bit_reverse32(u32) ((U32)__bit_reverse((U32)(u32))) +#endif + +/*! \brief Reverses the bits of \a u64. + * + * \param u64 U64 of which to reverse the bits. + * + * \return Value resulting from \a u64 with reversed bits. + */ +#define bit_reverse64(u64) ((U64)(((U64)bit_reverse32((U64)(u64) >> 32)) |\ + ((U64)bit_reverse32((U64)(u64)) << 32))) + +//! @} + + +/*! \name Alignment + */ +//! @{ + +/*! \brief Tests alignment of the number \a val with the \a n boundary. + * + * \param val Input value. + * \param n Boundary. + * + * \return \c 1 if the number \a val is aligned with the \a n boundary, else \c 0. + */ +#define Test_align(val, n ) (!Tst_bits( val, (n) - 1 ) ) + +/*! \brief Gets alignment of the number \a val with respect to the \a n boundary. + * + * \param val Input value. + * \param n Boundary. + * + * \return Alignment of the number \a val with respect to the \a n boundary. + */ +#define Get_align( val, n ) ( Rd_bits( val, (n) - 1 ) ) + +/*! \brief Sets alignment of the lvalue number \a lval to \a alg with respect to the \a n boundary. + * + * \param lval Input/output lvalue. + * \param n Boundary. + * \param alg Alignment. + * + * \return New value of \a lval resulting from its alignment set to \a alg with respect to the \a n boundary. + */ +#define Set_align(lval, n, alg) ( Wr_bits(lval, (n) - 1, alg) ) + +/*! \brief Aligns the number \a val with the upper \a n boundary. + * + * \param val Input value. + * \param n Boundary. + * + * \return Value resulting from the number \a val aligned with the upper \a n boundary. + */ +#define Align_up( val, n ) (((val) + ((n) - 1)) & ~((n) - 1)) + +/*! \brief Aligns the number \a val with the lower \a n boundary. + * + * \param val Input value. + * \param n Boundary. + * + * \return Value resulting from the number \a val aligned with the lower \a n boundary. + */ +#define Align_down(val, n ) ( (val) & ~((n) - 1)) + +//! @} + + +/*! \name Mathematics + * + * The same considerations as for clz and ctz apply here but AVR32-GCC does not + * provide built-in functions to access the assembly instructions abs, min and + * max and it does not produce them by itself in most cases, so two sets of + * macros are defined here: + * - Abs, Min and Max to apply to constant expressions (values known at + * compile time); + * - abs, min and max to apply to non-constant expressions (values unknown at + * compile time). + */ +//! @{ + +/*! \brief Takes the absolute value of \a a. + * + * \param a Input value. + * + * \return Absolute value of \a a. + * + * \note More optimized if only used with values known at compile time. + */ +#define Abs(a) (((a) < 0 ) ? -(a) : (a)) + +/*! \brief Takes the minimal value of \a a and \a b. + * + * \param a Input value. + * \param b Input value. + * + * \return Minimal value of \a a and \a b. + * + * \note More optimized if only used with values known at compile time. + */ +#define Min(a, b) (((a) < (b)) ? (a) : (b)) + +/*! \brief Takes the maximal value of \a a and \a b. + * + * \param a Input value. + * \param b Input value. + * + * \return Maximal value of \a a and \a b. + * + * \note More optimized if only used with values known at compile time. + */ +#define Max(a, b) (((a) > (b)) ? (a) : (b)) + +/*! \brief Takes the absolute value of \a a. + * + * \param a Input value. + * + * \return Absolute value of \a a. + * + * \note More optimized if only used with values unknown at compile time. + */ +#if (defined __GNUC__) + #define abs(a) \ + (\ + {\ + int __value = (a);\ + __asm__ ("abs\t%0" : "+r" (__value) : : "cc");\ + __value;\ + }\ + ) +#elif (defined __ICCAVR32__) + #define abs(a) Abs(a) +#endif + +/*! \brief Takes the minimal value of \a a and \a b. + * + * \param a Input value. + * \param b Input value. + * + * \return Minimal value of \a a and \a b. + * + * \note More optimized if only used with values unknown at compile time. + */ +#if (defined __GNUC__) + #define min(a, b) \ + (\ + {\ + int __value, __arg_a = (a), __arg_b = (b);\ + __asm__ ("min\t%0, %1, %2" : "=r" (__value) : "r" (__arg_a), "r" (__arg_b));\ + __value;\ + }\ + ) +#elif (defined __ICCAVR32__) + #define min(a, b) __min(a, b) +#endif + +/*! \brief Takes the maximal value of \a a and \a b. + * + * \param a Input value. + * \param b Input value. + * + * \return Maximal value of \a a and \a b. + * + * \note More optimized if only used with values unknown at compile time. + */ +#if (defined __GNUC__) + #define max(a, b) \ + (\ + {\ + int __value, __arg_a = (a), __arg_b = (b);\ + __asm__ ("max\t%0, %1, %2" : "=r" (__value) : "r" (__arg_a), "r" (__arg_b));\ + __value;\ + }\ + ) +#elif (defined __ICCAVR32__) + #define max(a, b) __max(a, b) +#endif + +//! @} + + +/*! \brief Calls the routine at address \a addr. + * + * It generates a long call opcode. + * + * For example, `Long_call(0x80000000)' generates a software reset on a UC3 if + * it is invoked from the CPU supervisor mode. + * + * \param addr Address of the routine to call. + * + * \note It may be used as a long jump opcode in some special cases. + */ +#define Long_call(addr) ((*(void (*)(void))(addr))()) + +/*! \brief Resets the CPU by software. + * + * \warning It shall not be called from the CPU application mode. + */ +#if (defined __GNUC__) + #define Reset_CPU() \ + (\ + {\ + __asm__ __volatile__ (\ + "lddpc r9, 3f\n\t"\ + "mfsr r8, %[SR]\n\t"\ + "bfextu r8, r8, %[SR_M_OFFSET], %[SR_M_SIZE]\n\t"\ + "cp.w r8, 0b001\n\t"\ + "breq 0f\n\t"\ + "sub r8, pc, $ - 1f\n\t"\ + "pushm r8-r9\n\t"\ + "rete\n"\ + "0:\n\t"\ + "mtsr %[SR], r9\n"\ + "1:\n\t"\ + "mov r0, 0\n\t"\ + "mov r1, 0\n\t"\ + "mov r2, 0\n\t"\ + "mov r3, 0\n\t"\ + "mov r4, 0\n\t"\ + "mov r5, 0\n\t"\ + "mov r6, 0\n\t"\ + "mov r7, 0\n\t"\ + "mov r8, 0\n\t"\ + "mov r9, 0\n\t"\ + "mov r10, 0\n\t"\ + "mov r11, 0\n\t"\ + "mov r12, 0\n\t"\ + "mov sp, 0\n\t"\ + "stdsp sp[0], sp\n\t"\ + "ldmts sp, sp\n\t"\ + "mov lr, 0\n\t"\ + "lddpc pc, 2f\n\t"\ + ".balign 4\n"\ + "2:\n\t"\ + ".word _start\n"\ + "3:\n\t"\ + ".word %[RESET_SR]"\ + :\ + : [SR] "i" (AVR32_SR),\ + [SR_M_OFFSET] "i" (AVR32_SR_M_OFFSET),\ + [SR_M_SIZE] "i" (AVR32_SR_M_SIZE),\ + [RESET_SR] "i" (AVR32_SR_GM_MASK | AVR32_SR_EM_MASK | (AVR32_SR_M_SUP << AVR32_SR_M_OFFSET))\ + );\ + }\ + ) +#elif (defined __ICCAVR32__) + #define Reset_CPU() \ + {\ + extern void *volatile __program_start;\ + __asm__ __volatile__ (\ + "mov r7, LWRD(__program_start)\n\t"\ + "orh r7, HWRD(__program_start)\n\t"\ + "mov r9, LWRD("ASTRINGZ(AVR32_SR_GM_MASK | AVR32_SR_EM_MASK | (AVR32_SR_M_SUP << AVR32_SR_M_OFFSET))")\n\t"\ + "orh r9, HWRD("ASTRINGZ(AVR32_SR_GM_MASK | AVR32_SR_EM_MASK | (AVR32_SR_M_SUP << AVR32_SR_M_OFFSET))")\n\t"\ + "mfsr r8, "ASTRINGZ(AVR32_SR)"\n\t"\ + "bfextu r8, r8, "ASTRINGZ(AVR32_SR_M_OFFSET)", "ASTRINGZ(AVR32_SR_M_SIZE)"\n\t"\ + "cp.w r8, 001b\n\t"\ + "breq $ + 10\n\t"\ + "sub r8, pc, -12\n\t"\ + "pushm r8-r9\n\t"\ + "rete\n\t"\ + "mtsr "ASTRINGZ(AVR32_SR)", r9\n\t"\ + "mov r0, 0\n\t"\ + "mov r1, 0\n\t"\ + "mov r2, 0\n\t"\ + "mov r3, 0\n\t"\ + "mov r4, 0\n\t"\ + "mov r5, 0\n\t"\ + "mov r6, 0\n\t"\ + "st.w r0[4], r7\n\t"\ + "mov r7, 0\n\t"\ + "mov r8, 0\n\t"\ + "mov r9, 0\n\t"\ + "mov r10, 0\n\t"\ + "mov r11, 0\n\t"\ + "mov r12, 0\n\t"\ + "mov sp, 0\n\t"\ + "stdsp sp[0], sp\n\t"\ + "ldmts sp, sp\n\t"\ + "mov lr, 0\n\t"\ + "ld.w pc, lr[4]"\ + );\ + __program_start;\ + } +#endif + + +/*! \name System Register Access + */ +//! @{ + +/*! \brief Gets the value of the \a sysreg system register. + * + * \param sysreg Address of the system register of which to get the value. + * + * \return Value of the \a sysreg system register. + */ +#if (defined __GNUC__) + #define Get_system_register(sysreg) __builtin_mfsr(sysreg) +#elif (defined __ICCAVR32__) + #define Get_system_register(sysreg) __get_system_register(sysreg) +#endif + +/*! \brief Sets the value of the \a sysreg system register to \a value. + * + * \param sysreg Address of the system register of which to set the value. + * \param value Value to set the \a sysreg system register to. + */ +#if (defined __GNUC__) + #define Set_system_register(sysreg, value) __builtin_mtsr(sysreg, value) +#elif (defined __ICCAVR32__) + #define Set_system_register(sysreg, value) __set_system_register(sysreg, value) +#endif + +//! @} + + +/*! \name CPU Status Register Access + */ +//! @{ + +/*! \brief Tells whether exceptions are globally enabled. + * + * \return \c 1 if exceptions are globally enabled, else \c 0. + */ +#define Is_global_exception_enabled() (!Tst_bits(Get_system_register(AVR32_SR), AVR32_SR_EM_MASK)) + +/*! \brief Disables exceptions globally. + */ +#if (defined __GNUC__) + #define Disable_global_exception() ({__asm__ __volatile__ ("ssrf\t%0" : : "i" (AVR32_SR_EM_OFFSET));}) +#elif (defined __ICCAVR32__) + #define Disable_global_exception() (__set_status_flag(AVR32_SR_EM_OFFSET)) +#endif + +/*! \brief Enables exceptions globally. + */ +#if (defined __GNUC__) + #define Enable_global_exception() ({__asm__ __volatile__ ("csrf\t%0" : : "i" (AVR32_SR_EM_OFFSET));}) +#elif (defined __ICCAVR32__) + #define Enable_global_exception() (__clear_status_flag(AVR32_SR_EM_OFFSET)) +#endif + +/*! \brief Tells whether interrupts are globally enabled. + * + * \return \c 1 if interrupts are globally enabled, else \c 0. + */ +#define Is_global_interrupt_enabled() (!Tst_bits(Get_system_register(AVR32_SR), AVR32_SR_GM_MASK)) + +/*! \brief Disables interrupts globally. + */ +#if (defined __GNUC__) + #define Disable_global_interrupt() ({__asm__ __volatile__ ("ssrf\t%0" : : "i" (AVR32_SR_GM_OFFSET));}) +#elif (defined __ICCAVR32__) + #define Disable_global_interrupt() (__disable_interrupt()) +#endif + +/*! \brief Enables interrupts globally. + */ +#if (defined __GNUC__) + #define Enable_global_interrupt() ({__asm__ __volatile__ ("csrf\t%0" : : "i" (AVR32_SR_GM_OFFSET));}) +#elif (defined __ICCAVR32__) + #define Enable_global_interrupt() (__enable_interrupt()) +#endif + +/*! \brief Tells whether interrupt level \a int_level is enabled. + * + * \param int_level Interrupt level (0 to 3). + * + * \return \c 1 if interrupt level \a int_level is enabled, else \c 0. + */ +#define Is_interrupt_level_enabled(int_level) (!Tst_bits(Get_system_register(AVR32_SR), TPASTE3(AVR32_SR_I, int_level, M_MASK))) + +/*! \brief Disables interrupt level \a int_level. + * + * \param int_level Interrupt level to disable (0 to 3). + */ +#if (defined __GNUC__) + #define Disable_interrupt_level(int_level) ({__asm__ __volatile__ ("ssrf\t%0" : : "i" (TPASTE3(AVR32_SR_I, int_level, M_OFFSET)));}) +#elif (defined __ICCAVR32__) + #define Disable_interrupt_level(int_level) (__set_status_flag(TPASTE3(AVR32_SR_I, int_level, M_OFFSET))) +#endif + +/*! \brief Enables interrupt level \a int_level. + * + * \param int_level Interrupt level to enable (0 to 3). + */ +#if (defined __GNUC__) + #define Enable_interrupt_level(int_level) ({__asm__ __volatile__ ("csrf\t%0" : : "i" (TPASTE3(AVR32_SR_I, int_level, M_OFFSET)));}) +#elif (defined __ICCAVR32__) + #define Enable_interrupt_level(int_level) (__clear_status_flag(TPASTE3(AVR32_SR_I, int_level, M_OFFSET))) +#endif + +/*! \brief Protects subsequent code from interrupts. + */ +#define AVR32_ENTER_CRITICAL_REGION( ) \ + { \ + Bool global_interrupt_enabled = Is_global_interrupt_enabled(); \ + Disable_global_interrupt(); // Disable the appropriate interrupts. + +/*! \brief This macro must always be used in conjunction with AVR32_ENTER_CRITICAL_REGION + * so that interrupts are enabled again. + */ +#define AVR32_LEAVE_CRITICAL_REGION( ) \ + if (global_interrupt_enabled) Enable_global_interrupt(); \ + } + +//! @} + + +/*! \name Debug Register Access + */ +//! @{ + +/*! \brief Gets the value of the \a dbgreg debug register. + * + * \param dbgreg Address of the debug register of which to get the value. + * + * \return Value of the \a dbgreg debug register. + */ +#if (defined __GNUC__) + #define Get_debug_register(dbgreg) __builtin_mfdr(dbgreg) +#elif (defined __ICCAVR32__) + #define Get_debug_register(dbgreg) __get_debug_register(dbgreg) +#endif + +/*! \brief Sets the value of the \a dbgreg debug register to \a value. + * + * \param dbgreg Address of the debug register of which to set the value. + * \param value Value to set the \a dbgreg debug register to. + */ +#if (defined __GNUC__) + #define Set_debug_register(dbgreg, value) __builtin_mtdr(dbgreg, value) +#elif (defined __ICCAVR32__) + #define Set_debug_register(dbgreg, value) __set_debug_register(dbgreg, value) +#endif + +//! @} + +#endif // __AVR32_ABI_COMPILER__ + + +//! Boolean evaluating MCU little endianism. +#if ((defined __GNUC__) && (defined __AVR32__)) || ((defined __ICCAVR32__) || (defined __AAVR32__)) + #define LITTLE_ENDIAN_MCU FALSE +#else + #error If you are here, you should check what is exactly the processor you are using... + #define LITTLE_ENDIAN_MCU FALSE +#endif + +// Check that MCU endianism is correctly defined. +#ifndef LITTLE_ENDIAN_MCU + #error YOU MUST define the MCU endianism with LITTLE_ENDIAN_MCU: either FALSE or TRUE +#endif + +//! Boolean evaluating MCU big endianism. +#define BIG_ENDIAN_MCU (!LITTLE_ENDIAN_MCU) + + +#ifdef __AVR32_ABI_COMPILER__ // Automatically defined when compiling for AVR32, not when assembling. + +/*! \name MCU Endianism Handling + */ +//! @{ + +#if (LITTLE_ENDIAN_MCU==TRUE) + #define LSB(u16) (((U8 *)&(u16))[0]) //!< Least significant byte of \a u16. + #define MSB(u16) (((U8 *)&(u16))[1]) //!< Most significant byte of \a u16. + + #define LSH(u32) (((U16 *)&(u32))[0]) //!< Least significant half-word of \a u32. + #define MSH(u32) (((U16 *)&(u32))[1]) //!< Most significant half-word of \a u32. + #define LSB0W(u32) (((U8 *)&(u32))[0]) //!< Least significant byte of 1st rank of \a u32. + #define LSB1W(u32) (((U8 *)&(u32))[1]) //!< Least significant byte of 2nd rank of \a u32. + #define LSB2W(u32) (((U8 *)&(u32))[2]) //!< Least significant byte of 3rd rank of \a u32. + #define LSB3W(u32) (((U8 *)&(u32))[3]) //!< Least significant byte of 4th rank of \a u32. + #define MSB3W(u32) LSB0W(u32) //!< Most significant byte of 4th rank of \a u32. + #define MSB2W(u32) LSB1W(u32) //!< Most significant byte of 3rd rank of \a u32. + #define MSB1W(u32) LSB2W(u32) //!< Most significant byte of 2nd rank of \a u32. + #define MSB0W(u32) LSB3W(u32) //!< Most significant byte of 1st rank of \a u32. + + #define LSW(u64) (((U32 *)&(u64))[0]) //!< Least significant word of \a u64. + #define MSW(u64) (((U32 *)&(u64))[1]) //!< Most significant word of \a u64. + #define LSH0(u64) (((U16 *)&(u64))[0]) //!< Least significant half-word of 1st rank of \a u64. + #define LSH1(u64) (((U16 *)&(u64))[1]) //!< Least significant half-word of 2nd rank of \a u64. + #define LSH2(u64) (((U16 *)&(u64))[2]) //!< Least significant half-word of 3rd rank of \a u64. + #define LSH3(u64) (((U16 *)&(u64))[3]) //!< Least significant half-word of 4th rank of \a u64. + #define MSH3(u64) LSH0(u64) //!< Most significant half-word of 4th rank of \a u64. + #define MSH2(u64) LSH1(u64) //!< Most significant half-word of 3rd rank of \a u64. + #define MSH1(u64) LSH2(u64) //!< Most significant half-word of 2nd rank of \a u64. + #define MSH0(u64) LSH3(u64) //!< Most significant half-word of 1st rank of \a u64. + #define LSB0D(u64) (((U8 *)&(u64))[0]) //!< Least significant byte of 1st rank of \a u64. + #define LSB1D(u64) (((U8 *)&(u64))[1]) //!< Least significant byte of 2nd rank of \a u64. + #define LSB2D(u64) (((U8 *)&(u64))[2]) //!< Least significant byte of 3rd rank of \a u64. + #define LSB3D(u64) (((U8 *)&(u64))[3]) //!< Least significant byte of 4th rank of \a u64. + #define LSB4D(u64) (((U8 *)&(u64))[4]) //!< Least significant byte of 5th rank of \a u64. + #define LSB5D(u64) (((U8 *)&(u64))[5]) //!< Least significant byte of 6th rank of \a u64. + #define LSB6D(u64) (((U8 *)&(u64))[6]) //!< Least significant byte of 7th rank of \a u64. + #define LSB7D(u64) (((U8 *)&(u64))[7]) //!< Least significant byte of 8th rank of \a u64. + #define MSB7D(u64) LSB0D(u64) //!< Most significant byte of 8th rank of \a u64. + #define MSB6D(u64) LSB1D(u64) //!< Most significant byte of 7th rank of \a u64. + #define MSB5D(u64) LSB2D(u64) //!< Most significant byte of 6th rank of \a u64. + #define MSB4D(u64) LSB3D(u64) //!< Most significant byte of 5th rank of \a u64. + #define MSB3D(u64) LSB4D(u64) //!< Most significant byte of 4th rank of \a u64. + #define MSB2D(u64) LSB5D(u64) //!< Most significant byte of 3rd rank of \a u64. + #define MSB1D(u64) LSB6D(u64) //!< Most significant byte of 2nd rank of \a u64. + #define MSB0D(u64) LSB7D(u64) //!< Most significant byte of 1st rank of \a u64. + +#elif (BIG_ENDIAN_MCU==TRUE) + #define MSB(u16) (((U8 *)&(u16))[0]) //!< Most significant byte of \a u16. + #define LSB(u16) (((U8 *)&(u16))[1]) //!< Least significant byte of \a u16. + + #define MSH(u32) (((U16 *)&(u32))[0]) //!< Most significant half-word of \a u32. + #define LSH(u32) (((U16 *)&(u32))[1]) //!< Least significant half-word of \a u32. + #define MSB0W(u32) (((U8 *)&(u32))[0]) //!< Most significant byte of 1st rank of \a u32. + #define MSB1W(u32) (((U8 *)&(u32))[1]) //!< Most significant byte of 2nd rank of \a u32. + #define MSB2W(u32) (((U8 *)&(u32))[2]) //!< Most significant byte of 3rd rank of \a u32. + #define MSB3W(u32) (((U8 *)&(u32))[3]) //!< Most significant byte of 4th rank of \a u32. + #define LSB3W(u32) MSB0W(u32) //!< Least significant byte of 4th rank of \a u32. + #define LSB2W(u32) MSB1W(u32) //!< Least significant byte of 3rd rank of \a u32. + #define LSB1W(u32) MSB2W(u32) //!< Least significant byte of 2nd rank of \a u32. + #define LSB0W(u32) MSB3W(u32) //!< Least significant byte of 1st rank of \a u32. + + #define MSW(u64) (((U32 *)&(u64))[0]) //!< Most significant word of \a u64. + #define LSW(u64) (((U32 *)&(u64))[1]) //!< Least significant word of \a u64. + #define MSH0(u64) (((U16 *)&(u64))[0]) //!< Most significant half-word of 1st rank of \a u64. + #define MSH1(u64) (((U16 *)&(u64))[1]) //!< Most significant half-word of 2nd rank of \a u64. + #define MSH2(u64) (((U16 *)&(u64))[2]) //!< Most significant half-word of 3rd rank of \a u64. + #define MSH3(u64) (((U16 *)&(u64))[3]) //!< Most significant half-word of 4th rank of \a u64. + #define LSH3(u64) MSH0(u64) //!< Least significant half-word of 4th rank of \a u64. + #define LSH2(u64) MSH1(u64) //!< Least significant half-word of 3rd rank of \a u64. + #define LSH1(u64) MSH2(u64) //!< Least significant half-word of 2nd rank of \a u64. + #define LSH0(u64) MSH3(u64) //!< Least significant half-word of 1st rank of \a u64. + #define MSB0D(u64) (((U8 *)&(u64))[0]) //!< Most significant byte of 1st rank of \a u64. + #define MSB1D(u64) (((U8 *)&(u64))[1]) //!< Most significant byte of 2nd rank of \a u64. + #define MSB2D(u64) (((U8 *)&(u64))[2]) //!< Most significant byte of 3rd rank of \a u64. + #define MSB3D(u64) (((U8 *)&(u64))[3]) //!< Most significant byte of 4th rank of \a u64. + #define MSB4D(u64) (((U8 *)&(u64))[4]) //!< Most significant byte of 5th rank of \a u64. + #define MSB5D(u64) (((U8 *)&(u64))[5]) //!< Most significant byte of 6th rank of \a u64. + #define MSB6D(u64) (((U8 *)&(u64))[6]) //!< Most significant byte of 7th rank of \a u64. + #define MSB7D(u64) (((U8 *)&(u64))[7]) //!< Most significant byte of 8th rank of \a u64. + #define LSB7D(u64) MSB0D(u64) //!< Least significant byte of 8th rank of \a u64. + #define LSB6D(u64) MSB1D(u64) //!< Least significant byte of 7th rank of \a u64. + #define LSB5D(u64) MSB2D(u64) //!< Least significant byte of 6th rank of \a u64. + #define LSB4D(u64) MSB3D(u64) //!< Least significant byte of 5th rank of \a u64. + #define LSB3D(u64) MSB4D(u64) //!< Least significant byte of 4th rank of \a u64. + #define LSB2D(u64) MSB5D(u64) //!< Least significant byte of 3rd rank of \a u64. + #define LSB1D(u64) MSB6D(u64) //!< Least significant byte of 2nd rank of \a u64. + #define LSB0D(u64) MSB7D(u64) //!< Least significant byte of 1st rank of \a u64. + +#else + #error Unknown endianism. +#endif + +//! @} + + +/*! \name Endianism Conversion + * + * The same considerations as for clz and ctz apply here but AVR32-GCC's + * __builtin_bswap_16 and __builtin_bswap_32 do not behave like macros when + * applied to constant expressions, so two sets of macros are defined here: + * - Swap16, Swap32 and Swap64 to apply to constant expressions (values known + * at compile time); + * - swap16, swap32 and swap64 to apply to non-constant expressions (values + * unknown at compile time). + */ +//! @{ + +/*! \brief Toggles the endianism of \a u16 (by swapping its bytes). + * + * \param u16 U16 of which to toggle the endianism. + * + * \return Value resulting from \a u16 with toggled endianism. + * + * \note More optimized if only used with values known at compile time. + */ +#define Swap16(u16) ((U16)(((U16)(u16) >> 8) |\ + ((U16)(u16) << 8))) + +/*! \brief Toggles the endianism of \a u32 (by swapping its bytes). + * + * \param u32 U32 of which to toggle the endianism. + * + * \return Value resulting from \a u32 with toggled endianism. + * + * \note More optimized if only used with values known at compile time. + */ +#define Swap32(u32) ((U32)(((U32)Swap16((U32)(u32) >> 16)) |\ + ((U32)Swap16((U32)(u32)) << 16))) + +/*! \brief Toggles the endianism of \a u64 (by swapping its bytes). + * + * \param u64 U64 of which to toggle the endianism. + * + * \return Value resulting from \a u64 with toggled endianism. + * + * \note More optimized if only used with values known at compile time. + */ +#define Swap64(u64) ((U64)(((U64)Swap32((U64)(u64) >> 32)) |\ + ((U64)Swap32((U64)(u64)) << 32))) + +/*! \brief Toggles the endianism of \a u16 (by swapping its bytes). + * + * \param u16 U16 of which to toggle the endianism. + * + * \return Value resulting from \a u16 with toggled endianism. + * + * \note More optimized if only used with values unknown at compile time. + */ +#if (defined __GNUC__) + #define swap16(u16) ((U16)__builtin_bswap_16((U16)(u16))) +#elif (defined __ICCAVR32__) + #define swap16(u16) ((U16)__swap_bytes_in_halfwords((U16)(u16))) +#endif + +/*! \brief Toggles the endianism of \a u32 (by swapping its bytes). + * + * \param u32 U32 of which to toggle the endianism. + * + * \return Value resulting from \a u32 with toggled endianism. + * + * \note More optimized if only used with values unknown at compile time. + */ +#if (defined __GNUC__) + #define swap32(u32) ((U32)__builtin_bswap_32((U32)(u32))) +#elif (defined __ICCAVR32__) + #define swap32(u32) ((U32)__swap_bytes((U32)(u32))) +#endif + +/*! \brief Toggles the endianism of \a u64 (by swapping its bytes). + * + * \param u64 U64 of which to toggle the endianism. + * + * \return Value resulting from \a u64 with toggled endianism. + * + * \note More optimized if only used with values unknown at compile time. + */ +#define swap64(u64) ((U64)(((U64)swap32((U64)(u64) >> 32)) |\ + ((U64)swap32((U64)(u64)) << 32))) + +//! @} + + +/*! \name Target Abstraction + */ +//! @{ + +#define _GLOBEXT_ extern //!< extern storage-class specifier. +#define _CONST_TYPE_ const //!< const type qualifier. +#define _MEM_TYPE_SLOW_ //!< Slow memory type. +#define _MEM_TYPE_MEDFAST_ //!< Fairly fast memory type. +#define _MEM_TYPE_FAST_ //!< Fast memory type. + +typedef U8 Byte; //!< 8-bit unsigned integer. + +#define memcmp_ram2ram memcmp //!< Target-specific memcmp of RAM to RAM. +#define memcmp_code2ram memcmp //!< Target-specific memcmp of RAM to NVRAM. +#define memcpy_ram2ram memcpy //!< Target-specific memcpy from RAM to RAM. +#define memcpy_code2ram memcpy //!< Target-specific memcpy from NVRAM to RAM. + +#define LSB0(u32) LSB0W(u32) //!< Least significant byte of 1st rank of \a u32. +#define LSB1(u32) LSB1W(u32) //!< Least significant byte of 2nd rank of \a u32. +#define LSB2(u32) LSB2W(u32) //!< Least significant byte of 3rd rank of \a u32. +#define LSB3(u32) LSB3W(u32) //!< Least significant byte of 4th rank of \a u32. +#define MSB3(u32) MSB3W(u32) //!< Most significant byte of 4th rank of \a u32. +#define MSB2(u32) MSB2W(u32) //!< Most significant byte of 3rd rank of \a u32. +#define MSB1(u32) MSB1W(u32) //!< Most significant byte of 2nd rank of \a u32. +#define MSB0(u32) MSB0W(u32) //!< Most significant byte of 1st rank of \a u32. + +//! @} + +#endif // __AVR32_ABI_COMPILER__ + + +#endif // _COMPILER_H_ diff --git a/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/parts.h b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/parts.h new file mode 100644 index 0000000000..3810fbcc03 --- /dev/null +++ b/bsp/avr32uc3b0/SOFTWARE_FRAMEWORK/UTILS/parts.h @@ -0,0 +1,203 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief Arch file for AVR32. + * + * This file defines common AVR32 UC3 series. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef _ARCH_H_ +#define _ARCH_H_ + +// UC3 A Series +#define UC3A0 ( defined (__GNUC__) && \ + ( defined (__AVR32_UC3A0128__) || \ + defined (__AVR32_UC3A0256__) || \ + defined (__AVR32_UC3A0512__) || \ + defined (__AVR32_UC3A0512ES__))) \ + ||((defined(__ICCAVR32__) || defined(__AAVR32__)) && \ + ( defined (__AT32UC3A0128__) || \ + defined (__AT32UC3A0256__) || \ + defined (__AT32UC3A0512__) || \ + defined (__AT32UC3A0512ES__))) + +#define UC3A1 ( defined (__GNUC__) && \ + ( defined (__AVR32_UC3A1128__) || \ + defined (__AVR32_UC3A1256__) || \ + defined (__AVR32_UC3A1512__) || \ + defined (__AVR32_UC3A1512ES__))) \ + ||((defined(__ICCAVR32__) || defined(__AAVR32__)) && \ + ( defined (__AT32UC3A1128__) || \ + defined (__AT32UC3A1256__) || \ + defined (__AT32UC3A1512__) || \ + defined (__AT32UC3A1512ES__))) + +#define UC3A3 ( defined (__GNUC__) && \ + ( defined (__AVR32_UC3A364__) || \ + defined (__AVR32_UC3A364S__) || \ + defined (__AVR32_UC3A3128__) || \ + defined (__AVR32_UC3A3128S__) || \ + defined (__AVR32_UC3A3256__) || \ + defined (__AVR32_UC3A3256S__))) \ + ||((defined(__ICCAVR32__) || defined(__AAVR32__)) && \ + ( defined (__AT32UC3A364__) || \ + defined (__AT32UC3A364S__) || \ + defined (__AT32UC3A3128__) || \ + defined (__AT32UC3A3128S__) || \ + defined (__AT32UC3A3256__) || \ + defined (__AT32UC3A3256S__))) + +#define UC3A (UC3A0 || UC3A1 || UC3A3) + +// UC3 B Series +#define UC3B0 ( defined (__GNUC__) && \ + ( defined (__AVR32_UC3B064__) || \ + defined (__AVR32_UC3B0128__) || \ + defined (__AVR32_UC3B0256__) || \ + defined (__AVR32_UC3B0256ES__) || \ + defined (__AVR32_UC3B0512__) || \ + defined (__AVR32_UC3B0512REVC_))) \ + ||((defined(__ICCAVR32__) || defined(__AAVR32__)) && \ + ( defined (__AT32UC3B064__) || \ + defined (__AT32UC3B0128__) || \ + defined (__AT32UC3B0256__) || \ + defined (__AT32UC3B0256ES__) || \ + defined (__AT32UC3B0512__) || \ + defined (__AT32UC3B0512REVC__))) + +#define UC3B1 ( defined (__GNUC__) && \ + ( defined (__AVR32_UC3B164__) || \ + defined (__AVR32_UC3B1128__) || \ + defined (__AVR32_UC3B1256__) || \ + defined (__AVR32_UC3B1256ES__) || \ + defined (__AVR32_UC3B1512__) || \ + defined (__AVR32_UC3B1512ES__))) \ + ||((defined(__ICCAVR32__) || defined(__AAVR32__)) && \ + ( defined (__AT32UC3B164__) || \ + defined (__AT32UC3B1128__) || \ + defined (__AT32UC3B1256__) || \ + defined (__AT32UC3B1256ES__) || \ + defined (__AT32UC3B1512__) || \ + defined (__AT32UC3B1512REVC__))) + +#define UC3B (UC3B0 || UC3B1 ) + +// UC3 C Series +#define UC3C0 ( defined (__GNUC__) && \ + ( defined (__AVR32_UC3C064C__) || \ + defined (__AVR32_UC3C0128C__) || \ + defined (__AVR32_UC3C0256C__) || \ + defined (__AVR32_UC3C0512CREVC__))) \ + ||((defined(__ICCAVR32__) || defined(__AAVR32__)) && \ + ( defined (__AT32UC3C064C__) || \ + defined (__AT32UC3C0128C__) || \ + defined (__AT32UC3C0256C__) || \ + defined (__AT32UC3C0512C__))) + +#define UC3C1 ( defined (__GNUC__) && \ + ( defined (__AVR32_UC3C164C__) || \ + defined (__AVR32_UC3C1128C__) || \ + defined (__AVR32_UC3C1256C__) || \ + defined (__AVR32_UC3C1512CREVC__))) \ + ||((defined(__ICCAVR32__) || defined(__AAVR32__)) && \ + ( defined (__AT32UC3C164C__) || \ + defined (__AT32UC3C1128C__) || \ + defined (__AT32UC3C1256C__) || \ + defined (__AT32UC3C1512C__))) + +#define UC3C2 ( defined (__GNUC__) && \ + ( defined (__AVR32_UC3C264C__) || \ + defined (__AVR32_UC3C2128C__) || \ + defined (__AVR32_UC3C2256C__) || \ + defined (__AVR32_UC3C2512CREVC__))) \ + ||((defined(__ICCAVR32__) || defined(__AAVR32__)) && \ + ( defined (__AT32UC3C264C__) || \ + defined (__AT32UC3C2128C__) || \ + defined (__AT32UC3C2256C__) || \ + defined (__AT32UC3C2512C__))) + +#define UC3C (UC3C0 || UC3C1 || UC3C2) + +// UC3 L Device series +#define UC3L0 ( defined (__GNUC__) && \ + ( defined (__AVR32_UC3L016__) || \ + defined (__AVR32_UC3L032__) || \ + defined (__AVR32_UC3L064__) || \ + defined (__AVR32_UC3L064REVB__))) \ + ||((defined(__ICCAVR32__) || defined(__AAVR32__)) && \ + ( defined (__AT32UC3L016__) || \ + defined (__AT32UC3L032__) || \ + defined (__AT32UC3L064__) || \ + defined (__AT32UC3L064REVB__))) + +#define UC3L1 ( defined (__GNUC__) && \ + ( defined (__AVR32_UC3L116__) || \ + defined (__AVR32_UC3L132__) || \ + defined (__AVR32_UC3L164__))) \ + ||((defined(__ICCAVR32__) || defined(__AAVR32__)) && \ + ( defined (__AT32UC3L116__) || \ + defined (__AT32UC3L132__) || \ + defined (__AT32UC3L164__))) + +#define UC3L2 ( defined (__GNUC__) && \ + ( defined (__AVR32_UC3L216__) || \ + defined (__AVR32_UC3L232__) || \ + defined (__AVR32_UC3L264__))) \ + ||((defined(__ICCAVR32__) || defined(__AAVR32__)) && \ + ( defined (__AT32UC3L216__) || \ + defined (__AT32UC3L232__) || \ + defined (__AT32UC3L264__))) + +#define UC3L3 ( defined (__GNUC__) && \ + ( defined (__AVR32_UC3L316__) || \ + defined (__AVR32_UC3L332__) || \ + defined (__AVR32_UC3L364__))) \ + ||((defined(__ICCAVR32__) || defined(__AAVR32__)) && \ + ( defined (__AT32UC3L316__) || \ + defined (__AT32UC3L332__) || \ + defined (__AT32UC3L364__))) + +#define UC3L (UC3L0 || UC3L1 || UC3L2 || UC3L3) + +#endif // _ARCH_H_ diff --git a/bsp/avr32uc3b0/application.c b/bsp/avr32uc3b0/application.c index db7ad39d42..ff8d6f061c 100644 --- a/bsp/avr32uc3b0/application.c +++ b/bsp/avr32uc3b0/application.c @@ -25,12 +25,12 @@ static void rt_thread_entry_led1(void* parameter) /* led on */ rt_kprintf("LED1 on\r\n"); gpio_tgl_gpio_pin(AVR32_PIN_PA08); - rt_thread_delay(50); /* sleep 0.5 second and switch to other thread */ + rt_thread_delay(RT_TICK_PER_SECOND / 2); /* sleep 0.5 second and switch to other thread */ /* led off */ rt_kprintf("LED1 off\r\n"); gpio_tgl_gpio_pin(AVR32_PIN_PA08); - rt_thread_delay(50); + rt_thread_delay(RT_TICK_PER_SECOND / 2); } } @@ -41,7 +41,7 @@ void rt_thread_entry_led2(void* parameter) while (1) { /* led on */ - rt_kprintf("LED2 on, count = %d\r\n", count); + rt_kprintf("LED2 on"); gpio_tgl_gpio_pin(AVR32_PIN_PA07); rt_thread_delay(RT_TICK_PER_SECOND); diff --git a/bsp/avr32uc3b0/rtconfig.h b/bsp/avr32uc3b0/rtconfig.h index 2f02170c55..81d65068e8 100644 --- a/bsp/avr32uc3b0/rtconfig.h +++ b/bsp/avr32uc3b0/rtconfig.h @@ -72,6 +72,7 @@ /* SECTION: Console options */ /* the buffer size of console*/ +#define RT_USING_CONSOLE #define RT_CONSOLEBUF_SIZE 128 /* SECTION: FinSH shell options */ diff --git a/libcpu/avr32/uc3/exception.x b/libcpu/avr32/uc3/exception.x index 3146cc7734..813bf454e1 100644 --- a/libcpu/avr32/uc3/exception.x +++ b/libcpu/avr32/uc3/exception.x @@ -71,7 +71,7 @@ // Export symbol. .global _evba .type _evba, @function -_evba: +_evba: .org 0x000 // Unrecoverable Exception. diff --git a/libcpu/avr32/uc3/serial.c b/libcpu/avr32/uc3/serial.c index da5aa868f8..d5ce9defe8 100644 --- a/libcpu/avr32/uc3/serial.c +++ b/libcpu/avr32/uc3/serial.c @@ -19,7 +19,6 @@ #include "serial.h" #include "compiler.h" #include "usart.h" -#include "pdca.h" struct rt_device _rt_usart_device; struct avr32_serial_int_rx _rt_usart_rx;