nuclei: Update README.md
Signed-off-by: Huaqi Fang <578567190@qq.com>
This commit is contained in:
Huaqi Fang
parent
fa8a2f24ea
commit
8c2cd4745b
|
|
@ -361,6 +361,7 @@ CONFIG_RT_USING_POSIX=y
|
|||
# CONFIG_PKG_USING_LEDBLINK is not set
|
||||
# CONFIG_PKG_USING_LITTLED is not set
|
||||
# CONFIG_PKG_USING_LKDGUI is not set
|
||||
# CONFIG_PKG_USING_NRF5X_SDK is not set
|
||||
# CONFIG_PKG_USING_WM_LIBRARIES is not set
|
||||
# CONFIG_PKG_USING_KENDRYTE_SDK is not set
|
||||
# CONFIG_PKG_USING_INFRARED is not set
|
||||
|
|
@ -380,9 +381,11 @@ CONFIG_RT_USING_POSIX=y
|
|||
# CONFIG_PKG_USING_RC522 is not set
|
||||
# CONFIG_PKG_USING_EMBARC_BSP is not set
|
||||
# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set
|
||||
# CONFIG_PKG_USING_MULTI_RTIMER is not set
|
||||
# CONFIG_PKG_USING_MAX7219 is not set
|
||||
# CONFIG_PKG_USING_BEEP is not set
|
||||
# CONFIG_PKG_USING_EASYBLINK is not set
|
||||
# CONFIG_PKG_USING_PMS_SERIES is not set
|
||||
CONFIG_PKG_USING_NUCLEI_SDK=y
|
||||
CONFIG_PKG_NUCLEI_SDK_PATH="/packages/peripherals/nuclei_sdk"
|
||||
# CONFIG_PKG_USING_NUCLEI_SDK_V023 is not set
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@
|
|||
|
||||
| 硬件 | 描述 |
|
||||
| --- | --- |
|
||||
| 内核 | nuclei n205 |
|
||||
| 内核 | Nuclei N205 |
|
||||
| 架构 | 32-bit RV32IMAC |
|
||||
| 主频 | 108 MHz |
|
||||
|
||||
|
|
@ -18,7 +18,7 @@
|
|||
|
||||
### 安装工具链
|
||||
|
||||
请根据[安装Nuclei RISC-V GCC Toolchain和OpenOCD](https://doc.nucleisys.com/nuclei_sdk/quickstart.html#setup-tools-and-environment) 来安装依赖的工具链。
|
||||
请根据[安装Nuclei RISC-V GCC Toolchain和OpenOCD](https://doc.nucleisys.com/nuclei_sdk/quickstart.html#setup-tools-and-environment) 来安装依赖的工具。
|
||||
|
||||
### 添加环境变量
|
||||
|
||||
|
|
@ -26,18 +26,32 @@
|
|||
|
||||
#### Windows
|
||||
|
||||
假设工具安装在 **D:\Software\Nuclei**目录下，则可以修改系统环境变量**PATH**,
|
||||
假设工具安装在 **D:\Software\Nuclei**目录下, 则可以修改系统环境变量**PATH**,
|
||||
将**D:\Software\Nuclei\gcc\bin;D:\Software\Nuclei\openocd\bin;**增加到**PATH**中。
|
||||
|
||||
或者在ENV工具命令行中运行
|
||||
|
||||
~~~cmd
|
||||
set PATH=D:\Software\Nuclei\gcc\bin;D:\Software\Nuclei\openocd\bin;%PATH%
|
||||
~~~
|
||||
|
||||
#### Linux
|
||||
|
||||
假设工具安装在 **~/Software/Nuclei**目录下，通过在Linux的``.bashrc``增加如下一行代码
|
||||
假设工具安装在 **~/Software/Nuclei**目录下, 通过在Linux的``.bashrc``增加如下一行代码
|
||||
来添加环境变量。
|
||||
|
||||
~~~bash
|
||||
export PATH=~/Software/Nuclei/gcc/bin:~/Software/Nuclei/openocd/bin:$PATH
|
||||
~~~
|
||||
|
||||
或者在ENV工具命令行中运行
|
||||
|
||||
~~~bash
|
||||
export PATH=~/Software/Nuclei/gcc/bin:~/Software/Nuclei/openocd/bin:$PATH
|
||||
~~~
|
||||
|
||||
**注意**: 对应的RISC-V GCC和OPENOCD的路径请替换成自己安装的路径。
|
||||
|
||||
## 烧写及执行
|
||||
|
||||
### [驱动设置](https://doc.nucleisys.com/nuclei_board_labs/hw/hw.html#on-board-debugger-driver)
|
||||
|
|
@ -46,7 +60,7 @@ export PATH=~/Software/Nuclei/gcc/bin:~/Software/Nuclei/openocd/bin:$PATH
|
|||
|
||||
下载好[RT-Thread](https://github.com/RT-Thread/rt-thread)的代码和[ENV工具](https://www.rt-thread.org/document/site/tutorial/env-video/)以后。
|
||||
|
||||
按照ENV工具的教程，在**rt-thread\bsp\nuclei\gd32vf103_rvstar**目录打开ENV工具命令行。
|
||||
按照ENV工具的教程, 在**rt-thread\bsp\nuclei\gd32vf103_rvstar**目录打开ENV工具命令行。
|
||||
|
||||
**注意**: 请确保Nuclei GCC和Nuclei OpenOCD的路径设置正确无误。
|
||||
|
||||
|
|
@ -57,7 +71,7 @@ export PATH=~/Software/Nuclei/gcc/bin:~/Software/Nuclei/openocd/bin:$PATH
|
|||
|
||||
### 下载程序
|
||||
|
||||
在保证程序能够正常编译后，在相同ENV终端执行``scons --run upload``进行代码的下载。
|
||||
在保证程序能够正常编译后, 在相同ENV终端执行``scons --run upload``进行代码的下载。
|
||||
|
||||
正常下载的输出如下:
|
||||
|
||||
|
|
@ -91,7 +105,7 @@ Quit anyway? (y or n) [answered Y; input not from terminal]
|
|||
Remote communication error. Target disconnected.: Success.
|
||||
~~~
|
||||
|
||||
下载程序之后，连接串口(115200-N-8-1)，可以看到 RT-Thread 的输出信息：
|
||||
下载程序之后, 连接串口(115200-N-8-1), 可以看到 RT-Thread 的输出信息：
|
||||
|
||||
```
|
||||
initialize rti_board_start:0 done
|
||||
|
|
@ -125,7 +139,7 @@ msh />
|
|||
|
||||
### 调试程序
|
||||
|
||||
在保证程序编译成功后，在相同ENV终端执行``scons --run debug``进行代码在命令行下进行GDB调试。
|
||||
在保证程序编译成功后, 在相同ENV终端执行``scons --run debug``进行代码在命令行下进行GDB调试。
|
||||
|
||||
正常的调试输出如下：
|
||||
|
||||
|
|
@ -173,8 +187,8 @@ Breakpoint 1, thread_entry (parameter=0x0) at applications\main.c:35
|
|||
|
||||
* https://doc.nucleisys.com/nuclei_sdk/quickstart.html#debug-application
|
||||
|
||||
为了更方便的进行调试，也可以下载**Nuclei Studio**集成开发环境，创建一个Debug Configuration，选择编译好的
|
||||
ELF文件，然后配置OPENOCD和GDB即可，OPENOCD配置文件路径为**bsp\nuclei\gd32vf103_rvstar\packages\nuclei_sdk-latest\SoC\gd32vf103\Board\gd32vf103v_rvstar\openocd_gd32vf103.cfg**
|
||||
为了更方便的进行调试, 也可以下载**Nuclei Studio**集成开发环境, 创建一个Debug Configuration, 选择编译好的
|
||||
ELF文件, 然后配置OPENOCD和GDB即可, OPENOCD配置文件路径为**bsp\nuclei\gd32vf103_rvstar\packages\nuclei_sdk-latest\SoC\gd32vf103\Board\gd32vf103v_rvstar\openocd_gd32vf103.cfg**
|
||||
|
||||
|
||||
## 驱动支持情况
|
||||
|
|
@ -186,7 +200,7 @@ ELF文件，然后配置OPENOCD和GDB即可，OPENOCD配置文件路径为**bsp\
|
|||
**注:**
|
||||
|
||||
- 适配RT-Thread的驱动框架的代码在 [../libraries/gd32vf103/HAL_Drivers](../libraries/gd32vf103/HAL_Drivers)目录下。
|
||||
- 如果有开发者想适配更多的驱动，请在对应目录下增加驱动适配支持。
|
||||
- 如果有开发者想适配更多的驱动, 请在对应目录下增加驱动适配支持。
|
||||
|
||||
## 联系人信息
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue