[bsp][Infineon]add drv_eth (#9527)
[bsp][Infineon]add xmc7200 eth driver #9527 --------- Co-authored-by: LZerro <lizhenhong@rt-thread.com>
This commit is contained in:
LZerro
GitHub
parent
5010c17539
commit
8c1cd39d80
|
|
@ -59,6 +59,9 @@ if GetDepend(['RT_USING_DAC']):
|
||||||
if GetDepend(['BSP_USING_TIM']):
|
if GetDepend(['BSP_USING_TIM']):
|
||||||
src += ['drv_hwtimer.c']
|
src += ['drv_hwtimer.c']
|
||||||
|
|
||||||
|
if GetDepend(['BSP_USING_ETH']):
|
||||||
|
src += ['drv_eth.c']
|
||||||
|
|
||||||
path = [cwd]
|
path = [cwd]
|
||||||
path += [cwd + '/config']
|
path += [cwd + '/config']
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
@ -15,7 +15,7 @@
|
||||||
|
|
||||||
#if defined(BSP_USING_ADC1) || defined(BSP_USING_ADC2)
|
#if defined(BSP_USING_ADC1) || defined(BSP_USING_ADC2)
|
||||||
|
|
||||||
//#define DRV_DEBUG
|
/*#define DRV_DEBUG*/
|
||||||
#define LOG_TAG "drv.adc"
|
#define LOG_TAG "drv.adc"
|
||||||
#include <drv_log.h>
|
#include <drv_log.h>
|
||||||
|
|
||||||
|
|
@ -45,9 +45,9 @@ static rt_err_t ifx_adc_enabled(struct rt_adc_device *device, rt_uint32_t channe
|
||||||
|
|
||||||
const cyhal_adc_channel_config_t channel_config =
|
const cyhal_adc_channel_config_t channel_config =
|
||||||
{
|
{
|
||||||
.enable_averaging = false, // Disable averaging for channel
|
.enable_averaging = false, /* Disable averaging for channel*/
|
||||||
.min_acquisition_ns = 1000, // Minimum acquisition time set to 1us
|
.min_acquisition_ns = 1000, /* Minimum acquisition time set to 1us*/
|
||||||
.enabled = enabled // Sample this channel when ADC performs a scan
|
.enabled = enabled /* Sample this channel when ADC performs a scan*/
|
||||||
};
|
};
|
||||||
|
|
||||||
if (enabled)
|
if (enabled)
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
@ -28,13 +28,13 @@ cyhal_adc_channel_t adc_chan_obj;
|
||||||
|
|
||||||
const cyhal_adc_config_t adc_config =
|
const cyhal_adc_config_t adc_config =
|
||||||
{
|
{
|
||||||
.continuous_scanning = false, // Continuous Scanning is disabled
|
.continuous_scanning = false, /* Continuous Scanning is disabled*/
|
||||||
.average_count = 1, // Average count disabled
|
.average_count = 1, /* Average count disabled*/
|
||||||
.vref = CYHAL_ADC_REF_VDDA, // VREF for Single ended channel set to VDDA
|
.vref = CYHAL_ADC_REF_VDDA, /* VREF for Single ended channel set to VDDA*/
|
||||||
.vneg = CYHAL_ADC_VNEG_VSSA, // VNEG for Single ended channel set to VSSA
|
.vneg = CYHAL_ADC_VNEG_VSSA, /* VNEG for Single ended channel set to VSSA*/
|
||||||
.resolution = 12u, // 12-bit resolution
|
.resolution = 12u, /* 12-bit resolution*/
|
||||||
.ext_vref = NC, // No connection
|
.ext_vref = NC, /* No connection*/
|
||||||
.bypass_pin = NC // No connection
|
.bypass_pin = NC /* No connection*/
|
||||||
};
|
};
|
||||||
|
|
||||||
#ifndef ADC1_CONFIG
|
#ifndef ADC1_CONFIG
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,867 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2024-09-23 LZerro first version
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <netif/ethernetif.h>
|
||||||
|
#include <lwipopts.h>
|
||||||
|
#include "drv_eth.h"
|
||||||
|
#include "eth_config.h"
|
||||||
|
#include <rtdbg.h>
|
||||||
|
|
||||||
|
#define DBG_TAG "drv"
|
||||||
|
#define DBG_LVL DBG_INFO
|
||||||
|
|
||||||
|
#define cy_ecm_log_msg(a,b,c,...) rt_kprintf(c, __VA_ARGS__)
|
||||||
|
|
||||||
|
#define cy_rtos_delay_milliseconds rt_thread_mdelay
|
||||||
|
|
||||||
|
#define SLEEP_ETHERNET_PHY_STATUS (500) /* Sleep time in milliseconds. */
|
||||||
|
|
||||||
|
#define Eth_Mempool_Num 40
|
||||||
|
#define MAX_ADDR_LEN 6
|
||||||
|
|
||||||
|
/********************************************************/
|
||||||
|
/******************EMAC configuration********************/
|
||||||
|
/********************************************************/
|
||||||
|
#define EMAC_MII 0
|
||||||
|
#define EMAC_RMII 1
|
||||||
|
#define EMAC_GMII 2
|
||||||
|
#define EMAC_RGMII 3
|
||||||
|
|
||||||
|
/********************************************************/
|
||||||
|
/** PHY Mode Selection */
|
||||||
|
#define EMAC_INTERFACE EMAC_RGMII
|
||||||
|
|
||||||
|
/********************************************************/
|
||||||
|
/* INTERRUPT */
|
||||||
|
#define ETH_INTR_SRC (CY_GIG_ETH_IRQN0)
|
||||||
|
#define ETH_INTR_SRC_Q1 (CY_GIG_ETH_IRQN1)
|
||||||
|
#define ETH_INTR_SRC_Q2 (CY_GIG_ETH_IRQN2)
|
||||||
|
|
||||||
|
/* TX_DATA_PIN */
|
||||||
|
#define ETHx_TD0_PORT CY_GIG_ETH_TD0_PORT
|
||||||
|
#define ETHx_TD0_PIN CY_GIG_ETH_TD0_PIN
|
||||||
|
#define ETHx_TD0_PIN_MUX CY_GIG_ETH_TD0_PIN_MUX
|
||||||
|
|
||||||
|
#define ETHx_TD1_PORT CY_GIG_ETH_TD1_PORT
|
||||||
|
#define ETHx_TD1_PIN CY_GIG_ETH_TD1_PIN
|
||||||
|
#define ETHx_TD1_PIN_MUX CY_GIG_ETH_TD1_PIN_MUX
|
||||||
|
|
||||||
|
#define ETHx_TD2_PORT CY_GIG_ETH_TD2_PORT
|
||||||
|
#define ETHx_TD2_PIN CY_GIG_ETH_TD2_PIN
|
||||||
|
#define ETHx_TD2_PIN_MUX CY_GIG_ETH_TD2_PIN_MUX
|
||||||
|
|
||||||
|
#define ETHx_TD3_PORT CY_GIG_ETH_TD3_PORT
|
||||||
|
#define ETHx_TD3_PIN CY_GIG_ETH_TD3_PIN
|
||||||
|
#define ETHx_TD3_PIN_MUX CY_GIG_ETH_TD3_PIN_MUX
|
||||||
|
|
||||||
|
/* TX_CTRL_PIN */
|
||||||
|
#define ETHx_TX_CTL_PORT CY_GIG_ETH_TX_CLK_PORT
|
||||||
|
#define ETHx_TX_CTL_PIN CY_GIG_ETH_TX_CTL_PIN
|
||||||
|
#define ETHx_TX_CTL_PIN_MUX CY_GIG_ETH_TX_CTL_PIN_MUX
|
||||||
|
|
||||||
|
/* RX_DATA_PIN */
|
||||||
|
#define ETHx_RD0_PORT CY_GIG_ETH_RD0_PORT
|
||||||
|
#define ETHx_RD0_PIN CY_GIG_ETH_RD0_PIN
|
||||||
|
#define ETHx_RD0_PIN_MUX CY_GIG_ETH_RD0_PIN_MUX
|
||||||
|
|
||||||
|
#define ETHx_RD1_PORT CY_GIG_ETH_RD1_PORT
|
||||||
|
#define ETHx_RD1_PIN CY_GIG_ETH_RD1_PIN
|
||||||
|
#define ETHx_RD1_PIN_MUX CY_GIG_ETH_RD1_PIN_MUX
|
||||||
|
|
||||||
|
#define ETHx_RD2_PORT CY_GIG_ETH_RD2_PORT
|
||||||
|
#define ETHx_RD2_PIN CY_GIG_ETH_RD2_PIN
|
||||||
|
#define ETHx_RD2_PIN_MUX CY_GIG_ETH_RD2_PIN_MUX
|
||||||
|
|
||||||
|
#define ETHx_RD3_PORT CY_GIG_ETH_RD3_PORT
|
||||||
|
#define ETHx_RD3_PIN CY_GIG_ETH_RD3_PIN
|
||||||
|
#define ETHx_RD3_PIN_MUX CY_GIG_ETH_RD3_PIN_MUX
|
||||||
|
|
||||||
|
/* RX_CTRL_PIN */
|
||||||
|
#define ETHx_RX_CTL_PORT CY_GIG_ETH_RX_CTL_PORT
|
||||||
|
#define ETHx_RX_CTL_PIN CY_GIG_ETH_RX_CTL_PIN
|
||||||
|
#define ETHx_RX_CTL_PIN_MUX CY_GIG_ETH_RX_CTL_PIN_MUX
|
||||||
|
|
||||||
|
/* CLK_PORT_PIN */
|
||||||
|
#define ETHx_TX_CLK_PORT CY_GIG_ETH_TX_CLK_PORT
|
||||||
|
#define ETHx_TX_CLK_PIN CY_GIG_ETH_TX_CLK_PIN
|
||||||
|
#define ETHx_TX_CLK_PIN_MUX CY_GIG_ETH_TX_CLK_PIN_MUX
|
||||||
|
|
||||||
|
#define ETHx_RX_CLK_PORT CY_GIG_ETH_RX_CLK_PORT
|
||||||
|
#define ETHx_RX_CLK_PIN CY_GIG_ETH_RX_CLK_PIN
|
||||||
|
#define ETHx_RX_CLK_PIN_MUX CY_GIG_ETH_RX_CLK_PIN_MUX
|
||||||
|
|
||||||
|
/* REF_CLK */
|
||||||
|
#define ETHx_REF_CLK_PORT CY_GIG_ETH_REF_CLK_PORT
|
||||||
|
#define ETHx_REF_CLK_PIN CY_GIG_ETH_REF_CLK_PIN
|
||||||
|
#define ETHx_REF_CLK_PIN_MUX CY_GIG_ETH_REF_CLK_PIN_MUX
|
||||||
|
|
||||||
|
/* Management Data Clock */
|
||||||
|
#define ETHx_MDC_PORT CY_GIG_ETH_MDC_PORT
|
||||||
|
#define ETHx_MDC_PIN CY_GIG_ETH_MDC_PIN
|
||||||
|
#define ETHx_MDC_PIN_MUX CY_GIG_ETH_MDC_PIN_MUX
|
||||||
|
|
||||||
|
/* Management Data Input/Output */
|
||||||
|
#define ETHx_MDIO_PORT CY_GIG_ETH_MDIO_PORT
|
||||||
|
#define ETHx_MDIO_PIN CY_GIG_ETH_MDIO_PIN
|
||||||
|
#define ETHx_MDIO_PIN_MUX CY_GIG_ETH_MDIO_PIN_MUX
|
||||||
|
|
||||||
|
/* Bits masks to verify auto negotiation configured speed */
|
||||||
|
#define ANLPAR_10_Msk (0x00000020UL) /**< 10BASE-Te Support */
|
||||||
|
#define ANLPAR_10_Pos (5UL) /**< 10BASE-Te bit position */
|
||||||
|
#define ANLPAR_10FD_Msk (0x00000040UL) /**< 10BASE-Te Full Duplex Support */
|
||||||
|
#define ANLPAR_10FD_Pos (6UL) /**< 10BASE-Te Full Duplex bit position */
|
||||||
|
|
||||||
|
#define ANLPAR_TX_Msk (0x00000080UL) /**< 100BASE-TX Support */
|
||||||
|
#define ANLPAR_TX_Pos (7UL) /**< 100BASE-TX bit position */
|
||||||
|
#define ANLPAR_TXFD_Msk (0x00000100UL) /**< 100BASE-TX Full Duplex Support */
|
||||||
|
#define ANLPAR_TXFD_Pos (8UL) /**< 100BASE-TX Full Duplex bit position */
|
||||||
|
#define ANLPAR_T4_Msk (0x00000200UL) /**< 100BASE-T4 Support */
|
||||||
|
#define ANLPAR_T4_Pos (9UL) /**< 100BASE-T4 bit position */
|
||||||
|
|
||||||
|
#define STS1_1000BASE_T_HALFDUPLEX_Msk (0x00000400UL) /**< 1000BASE-T Half-Duplex Capable */
|
||||||
|
#define STS1_1000BASE_T_HALFDUPLEX_Pos (10UL) /**< 1000BASE-T Half-Duplex bit position */
|
||||||
|
#define STS1_1000BASE_T_FULLDUPLEX_Msk (0x00000800UL) /**< 1000BASE-T Full-Duplex Capable */
|
||||||
|
#define STS1_1000BASE_T_FULLDUPLEX_Pos (11UL) /**< 1000BASE-T Full-Duplex bit position */
|
||||||
|
|
||||||
|
/********************************************************/
|
||||||
|
|
||||||
|
/** PHY related constants */
|
||||||
|
#define PHY_ADDR (0) /* Value depends on PHY and its hardware configurations */
|
||||||
|
#define PHY_ID_DP83867IR (0x2000A231) /* PHYIDR1=0x2000 PHYIDR2=0xA231 */
|
||||||
|
|
||||||
|
/************************START********************************/
|
||||||
|
|
||||||
|
struct rt_ifx_eth
|
||||||
|
{
|
||||||
|
/* inherit from ethernet device */
|
||||||
|
struct eth_device parent;
|
||||||
|
#ifndef PHY_USING_INTERRUPT_MODE
|
||||||
|
rt_timer_t poll_link_timer;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* interface address info, hw address */
|
||||||
|
rt_uint8_t dev_addr[MAX_ADDR_LEN];
|
||||||
|
/* ETH_Speed */
|
||||||
|
rt_uint32_t ETH_Speed;
|
||||||
|
/* ETH_Duplex_Mode */
|
||||||
|
rt_uint32_t ETH_Mode;
|
||||||
|
|
||||||
|
cy_stc_ephy_t phy_obj;
|
||||||
|
ETH_Type *eth_base_type;
|
||||||
|
};
|
||||||
|
|
||||||
|
typedef struct rt_ifx_eth* rt_ifx_eth_t;
|
||||||
|
|
||||||
|
static cy_stc_ethif_wrapper_config_t stcWrapperConfig;
|
||||||
|
uint8_t *pRx_Q_buff_pool[CY_ETH_DEFINE_TOTAL_BD_PER_RXQUEUE];
|
||||||
|
|
||||||
|
static struct rt_ifx_eth ifx_eth_device;
|
||||||
|
static bool is_driver_configured = false;
|
||||||
|
|
||||||
|
static rt_uint8_t eth_mempool[Eth_Mempool_Num][CY_ETH_SIZE_MAX_FRAME];
|
||||||
|
static rt_uint8_t mempool_index = 0;
|
||||||
|
|
||||||
|
static rt_mailbox_t recv_frame_buffer_addr_mb = RT_NULL;
|
||||||
|
|
||||||
|
/************************END********************************/
|
||||||
|
|
||||||
|
/************************START********************************/
|
||||||
|
|
||||||
|
static void Cy_Ethx_InterruptHandler (void);
|
||||||
|
void cy_process_ethernet_data_cb( ETH_Type *eth_type, uint8_t *rx_buffer, uint32_t length );
|
||||||
|
void cy_notify_ethernet_rx_data_cb(ETH_Type *base, uint8_t **u8RxBuffer, uint32_t *u32Length);
|
||||||
|
struct pbuf *rt_ifx_eth_rx(rt_device_t dev);
|
||||||
|
rt_err_t rt_ifx_eth_tx(rt_device_t dev, struct pbuf *p);
|
||||||
|
static rt_err_t rt_ifx_eth_open(rt_device_t dev, rt_uint16_t oflag);
|
||||||
|
static rt_err_t rt_ifx_eth_close(rt_device_t dev);
|
||||||
|
static rt_ssize_t rt_ifx_eth_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size);
|
||||||
|
static rt_ssize_t rt_ifx_eth_write(rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size);
|
||||||
|
static rt_err_t rt_ifx_eth_control(rt_device_t dev, int cmd, void *args);
|
||||||
|
static void phy_monitor_thread_entry(void *parameter);
|
||||||
|
static cy_en_ethif_speed_sel_t ecm_config_to_speed_sel( cy_ecm_phy_config_t *config);
|
||||||
|
static void eth_clock_config(cy_en_ethif_speed_sel_t speed_sel, cy_ecm_phy_speed_t phy_speed);
|
||||||
|
void phyRead(uint32_t phyId, uint32_t regAddress, uint32_t *value);
|
||||||
|
void phyWrite(uint32_t phyId, uint32_t regAddress, uint32_t value);
|
||||||
|
static void ethernet_portpins_init (cy_ecm_speed_type_t interface_speed_type);
|
||||||
|
static void init_phy_DP83867IR (ETH_Type *reg_base, cy_ecm_phy_config_t *ecm_phy_config, cy_stc_ephy_t *phy_obj);
|
||||||
|
cy_rslt_t cy_eth_driver_initialization(ETH_Type *reg_base, cy_ecm_phy_config_t *ecm_phy_config, cy_stc_ephy_t *phy_obj);
|
||||||
|
static void enable_phy_DP83867IR_extended_reg(ETH_Type *reg_base, cy_ecm_phy_config_t *ecm_phy_config);
|
||||||
|
static rt_err_t rt_ifx_eth_init(rt_device_t dev);
|
||||||
|
|
||||||
|
/************************END********************************/
|
||||||
|
|
||||||
|
/************************START********************************/
|
||||||
|
|
||||||
|
/** General Ethernet configuration */
|
||||||
|
static cy_stc_ethif_mac_config_t stcENETConfig = {
|
||||||
|
.bintrEnable = 1, /** Interrupt enable */
|
||||||
|
.dmaDataBurstLen = CY_ETHIF_DMA_DBUR_LEN_4,
|
||||||
|
.u8dmaCfgFlags = CY_ETHIF_CFG_DMA_FRCE_TX_BRST,
|
||||||
|
.mdcPclkDiv = CY_ETHIF_MDC_DIV_BY_48, /** source clock is 80 MHz and MDC must be less than 2.5MHz */
|
||||||
|
.u8rxLenErrDisc = 0, /** Length error frame not discarded */
|
||||||
|
.u8disCopyPause = 0,
|
||||||
|
.u8chkSumOffEn = 0, /** Checksum for both Tx and Rx disabled */
|
||||||
|
.u8rx1536ByteEn = 1, /** Enable receive frame up to 1536 */
|
||||||
|
.u8rxJumboFrEn = 0,
|
||||||
|
.u8enRxBadPreamble = 1,
|
||||||
|
.u8ignoreIpgRxEr = 0,
|
||||||
|
.u8storeUdpTcpOffset = 0,
|
||||||
|
.u8aw2wMaxPipeline = 2, /** Value must be > 0 */
|
||||||
|
.u8ar2rMaxPipeline = 2, /** Value must be > 0 */
|
||||||
|
.u8pfcMultiQuantum = 0,
|
||||||
|
.pstcWrapperConfig = &stcWrapperConfig,
|
||||||
|
.pstcTSUConfig = NULL, //&stcTSUConfig, /** TSU settings */
|
||||||
|
.btxq0enable = 1, /** Tx Q0 Enabled */
|
||||||
|
.btxq1enable = 0, /** Tx Q1 Disabled */
|
||||||
|
.btxq2enable = 0, /** Tx Q2 Disabled */
|
||||||
|
.brxq0enable = 1, /** Rx Q0 Enabled */
|
||||||
|
.brxq1enable = 0, /** Rx Q1 Disabled */
|
||||||
|
.brxq2enable = 0, /** Rx Q2 Disabled */
|
||||||
|
};
|
||||||
|
|
||||||
|
/** Interrupt configurations */
|
||||||
|
static cy_stc_ethif_intr_config_t stcInterruptConfig = {
|
||||||
|
.btsu_time_match = 0, /** Timestamp unit time match event */
|
||||||
|
.bwol_rx = 0, /** Wake-on-LAN event received */
|
||||||
|
.blpi_ch_rx = 0, /** LPI indication status bit change received */
|
||||||
|
.btsu_sec_inc = 0, /** TSU seconds register increment */
|
||||||
|
.bptp_tx_pdly_rsp = 0, /** PTP pdelay_resp frame transmitted */
|
||||||
|
.bptp_tx_pdly_req = 0, /** PTP pdelay_req frame transmitted */
|
||||||
|
.bptp_rx_pdly_rsp = 0, /** PTP pdelay_resp frame received */
|
||||||
|
.bptp_rx_pdly_req = 0, /** PTP pdelay_req frame received */
|
||||||
|
.bptp_tx_sync = 0, /** PTP sync frame transmitted */
|
||||||
|
.bptp_tx_dly_req = 0, /** PTP delay_req frame transmitted */
|
||||||
|
.bptp_rx_sync = 0, /** PTP sync frame received */
|
||||||
|
.bptp_rx_dly_req = 0, /** PTP delay_req frame received */
|
||||||
|
.bext_intr = 0, /** External input interrupt detected */
|
||||||
|
.bpause_frame_tx = 0, /** Pause frame transmitted */
|
||||||
|
.bpause_time_zero = 0, /** Pause time reaches zero or zero pause frame received */
|
||||||
|
.bpause_nz_qu_rx = 0, /** Pause frame with non-zero quantum received */
|
||||||
|
.bhresp_not_ok = 0, /** DMA HRESP not OK */
|
||||||
|
.brx_overrun = 1, /** Rx overrun error */
|
||||||
|
.bpcs_link_change_det = 0, /** Link status change detected by PCS */
|
||||||
|
.btx_complete = 1, /** Frame has been transmitted successfully */
|
||||||
|
.btx_fr_corrupt = 1, /** Tx frame corrupted */
|
||||||
|
.btx_retry_ex_late_coll = 1, /** Retry limit exceeded or late collision */
|
||||||
|
.btx_underrun = 1, /** Tx underrun */
|
||||||
|
.btx_used_read = 1, /** Used bit set has been read in Tx descriptor list */
|
||||||
|
.brx_used_read = 1, /** Used bit set has been read in Rx descriptor list */
|
||||||
|
.brx_complete = 1, /** Frame received successfully and stored */
|
||||||
|
.bman_frame = 0, /** Management frame sent */
|
||||||
|
};
|
||||||
|
|
||||||
|
//回调函数注册
|
||||||
|
static cy_stc_ethif_cb_t stcInterruptCB = {
|
||||||
|
/** Callback functions */
|
||||||
|
.rxframecb = cy_process_ethernet_data_cb, //接收处理回调函数
|
||||||
|
.txerrorcb = NULL, //发送错误回调函数
|
||||||
|
.txcompletecb = NULL, //发送完成回调函数
|
||||||
|
.tsuSecondInccb = NULL, //TSU 计时器每秒递增时触发的回调
|
||||||
|
.rxgetbuff = cy_notify_ethernet_rx_data_cb //获取空闲缓冲区
|
||||||
|
};
|
||||||
|
/************************END********************************/
|
||||||
|
|
||||||
|
/************************START********************************/
|
||||||
|
|
||||||
|
/** PortPinName.outVal|| driveMode hsiom ||intEdge||intMask||vtrip||slewRate||driveSel||vregEn||ibufMode||vtripSel||vrefSel||vohSel*/
|
||||||
|
static cy_stc_gpio_pin_config_t ethx_tx0 = {0x00, CY_GPIO_DM_STRONG_IN_OFF, ETHx_TD0_PIN_MUX, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||||
|
static cy_stc_gpio_pin_config_t ethx_tx1 = {0x00, CY_GPIO_DM_STRONG_IN_OFF, ETHx_TD1_PIN_MUX, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||||
|
static cy_stc_gpio_pin_config_t ethx_tx2 = {0x00, CY_GPIO_DM_STRONG_IN_OFF, ETHx_TD2_PIN_MUX, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||||
|
static cy_stc_gpio_pin_config_t ethx_tx3 = {0x00, CY_GPIO_DM_STRONG_IN_OFF, ETHx_TD3_PIN_MUX, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||||
|
static cy_stc_gpio_pin_config_t ethx_txctl = {0x00, CY_GPIO_DM_STRONG_IN_OFF, ETHx_TX_CTL_PIN_MUX, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||||
|
static cy_stc_gpio_pin_config_t ethx_rx0 = {0x00, CY_GPIO_DM_HIGHZ, ETHx_RD0_PIN_MUX, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||||
|
static cy_stc_gpio_pin_config_t ethx_rx1 = {0x00, CY_GPIO_DM_HIGHZ, ETHx_RD1_PIN_MUX, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||||
|
static cy_stc_gpio_pin_config_t ethx_rx2 = {0x00, CY_GPIO_DM_HIGHZ, ETHx_RD2_PIN_MUX, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||||
|
static cy_stc_gpio_pin_config_t ethx_rx3 = {0x00, CY_GPIO_DM_HIGHZ, ETHx_RD3_PIN_MUX, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||||
|
static cy_stc_gpio_pin_config_t ethx_rxctl = {0x00, CY_GPIO_DM_HIGHZ, ETHx_RX_CTL_PIN_MUX, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||||
|
static cy_stc_gpio_pin_config_t ethx_txclk = {0x00, CY_GPIO_DM_STRONG_IN_OFF, ETHx_TX_CLK_PIN_MUX, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||||
|
static cy_stc_gpio_pin_config_t ethx_rxclk = {0x00, CY_GPIO_DM_HIGHZ, ETHx_RX_CLK_PIN_MUX, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||||
|
static cy_stc_gpio_pin_config_t ethx_refclk = {0x00, CY_GPIO_DM_HIGHZ, ETHx_REF_CLK_PIN_MUX, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
||||||
|
static cy_stc_gpio_pin_config_t ethx_mdc = {0x00, CY_GPIO_DM_STRONG_IN_OFF, ETHx_MDC_PIN_MUX, 0, 0, 0, 0, 3, 0, 0, 0, 0, 0};
|
||||||
|
static cy_stc_gpio_pin_config_t ethx_mdio = {0x00, CY_GPIO_DM_STRONG, ETHx_MDIO_PIN_MUX, 0, 0, 0, 0, 3, 0, 0, 0, 0, 0};
|
||||||
|
|
||||||
|
/** Enable Ethernet interrupts */
|
||||||
|
static const cy_stc_sysint_t irq_cfg_ethx_q0 = {.intrSrc = ((NvicMux3_IRQn << 16) | ETH_INTR_SRC), .intrPriority=3UL};
|
||||||
|
static const cy_stc_sysint_t irq_cfg_ethx_q1 = {.intrSrc = ((NvicMux3_IRQn << 16) | ETH_INTR_SRC_Q1), .intrPriority=3UL};
|
||||||
|
static const cy_stc_sysint_t irq_cfg_ethx_q2 = {.intrSrc = ((NvicMux3_IRQn << 16) | ETH_INTR_SRC_Q2), .intrPriority=3UL};
|
||||||
|
|
||||||
|
/************************END********************************/
|
||||||
|
|
||||||
|
/** Interrupt handlers for Ethernet 1 */
|
||||||
|
static void Cy_Ethx_InterruptHandler (void)
|
||||||
|
{
|
||||||
|
/* enter interrupt */
|
||||||
|
rt_interrupt_enter();
|
||||||
|
|
||||||
|
Cy_ETHIF_DecodeEvent(ETH_REG_BASE);
|
||||||
|
|
||||||
|
/* leave interrupt */
|
||||||
|
rt_interrupt_leave();
|
||||||
|
}
|
||||||
|
|
||||||
|
void cy_process_ethernet_data_cb( ETH_Type *eth_type, uint8_t *rx_buffer, uint32_t length )
|
||||||
|
{
|
||||||
|
rt_err_t result;
|
||||||
|
|
||||||
|
result = rt_mb_send(recv_frame_buffer_addr_mb, (rt_ubase_t)rx_buffer);
|
||||||
|
if (result != RT_EOK)
|
||||||
|
{
|
||||||
|
LOG_I("Send_Recv_Buffer_Adder_MB err = %d", result);
|
||||||
|
}
|
||||||
|
|
||||||
|
result = eth_device_ready(&(ifx_eth_device.parent));
|
||||||
|
if (result != RT_EOK)
|
||||||
|
{
|
||||||
|
LOG_I("RxCpltCallback err = %d", result);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void cy_notify_ethernet_rx_data_cb(ETH_Type *base, uint8_t **u8RxBuffer, uint32_t *u32Length)
|
||||||
|
{
|
||||||
|
*u8RxBuffer = eth_mempool[mempool_index++];
|
||||||
|
if(mempool_index >= Eth_Mempool_Num)
|
||||||
|
{
|
||||||
|
mempool_index = 0;
|
||||||
|
}
|
||||||
|
*u32Length = CY_ETH_SIZE_MAX_FRAME;
|
||||||
|
}
|
||||||
|
|
||||||
|
struct pbuf *rt_ifx_eth_rx(rt_device_t dev)
|
||||||
|
{
|
||||||
|
rt_err_t result;
|
||||||
|
rt_uint32_t *rx_buffer;
|
||||||
|
rt_uint32_t length = CY_ETH_SIZE_MAX_FRAME;
|
||||||
|
struct pbuf *recv_frame = RT_NULL;
|
||||||
|
struct pbuf *temp = RT_NULL;
|
||||||
|
rt_uint32_t bufferoffset = 0;
|
||||||
|
rt_uint32_t payloadlength = 0;
|
||||||
|
|
||||||
|
result = rt_mb_recv(recv_frame_buffer_addr_mb, (rt_ubase_t *)&rx_buffer, 1000);
|
||||||
|
if(result != RT_EOK)
|
||||||
|
{
|
||||||
|
LOG_I("Recv_Recv_Buffer_Adder_MB err = %d", result);
|
||||||
|
}
|
||||||
|
|
||||||
|
recv_frame = pbuf_alloc(PBUF_RAW, length, PBUF_POOL);
|
||||||
|
if(recv_frame != RT_NULL)
|
||||||
|
{
|
||||||
|
if(rx_buffer != RT_NULL)
|
||||||
|
{
|
||||||
|
for(temp = recv_frame; temp != RT_NULL; temp = temp->next)
|
||||||
|
{
|
||||||
|
payloadlength = temp->len;
|
||||||
|
rt_memcpy((uint8_t *)((uint8_t *)temp->payload), (uint8_t *)((uint8_t *)rx_buffer + bufferoffset), (payloadlength < length ? payloadlength : length));
|
||||||
|
bufferoffset = bufferoffset + payloadlength;
|
||||||
|
length = length - payloadlength;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
return recv_frame;
|
||||||
|
}
|
||||||
|
|
||||||
|
rt_err_t rt_ifx_eth_tx(rt_device_t dev, struct pbuf *p)
|
||||||
|
{
|
||||||
|
struct pbuf *q;
|
||||||
|
cy_en_ethif_status_t eth_status;
|
||||||
|
rt_uint32_t framelen = 0;
|
||||||
|
rt_uint8_t data_buffer[CY_ETH_SIZE_MAX_FRAME];
|
||||||
|
rt_ifx_eth_t ifx_device = (rt_ifx_eth_t)dev;
|
||||||
|
|
||||||
|
if (p->tot_len > (u16_t)CY_ETH_SIZE_MAX_FRAME)
|
||||||
|
{
|
||||||
|
return -RT_ERROR;
|
||||||
|
}
|
||||||
|
for(q = p; q != NULL; q = q->next)
|
||||||
|
{
|
||||||
|
rt_memcpy(data_buffer + framelen, q->payload, q->len);
|
||||||
|
framelen += (uint32_t)q->len;
|
||||||
|
}
|
||||||
|
|
||||||
|
eth_status = Cy_ETHIF_TransmitFrame(ifx_device->eth_base_type, data_buffer, framelen, CY_ETH_QS0_0, true);
|
||||||
|
if(eth_status != CY_ETHIF_SUCCESS)
|
||||||
|
{
|
||||||
|
rt_kprintf("failed to send outgoing packet:[%d]\n", eth_status);
|
||||||
|
}
|
||||||
|
return RT_EOK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_err_t rt_ifx_eth_open(rt_device_t dev, rt_uint16_t oflag)
|
||||||
|
{
|
||||||
|
LOG_D("emac open");
|
||||||
|
return RT_EOK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_err_t rt_ifx_eth_close(rt_device_t dev)
|
||||||
|
{
|
||||||
|
LOG_D("emac close");
|
||||||
|
return RT_EOK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_ssize_t rt_ifx_eth_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size)
|
||||||
|
{
|
||||||
|
LOG_D("emac read");
|
||||||
|
rt_set_errno(-RT_ENOSYS);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_ssize_t rt_ifx_eth_write(rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size)
|
||||||
|
{
|
||||||
|
LOG_D("emac write");
|
||||||
|
rt_set_errno(-RT_ENOSYS);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_err_t rt_ifx_eth_control(rt_device_t dev, int cmd, void *args)
|
||||||
|
{
|
||||||
|
rt_ifx_eth_t eth_device = (rt_ifx_eth_t)dev;
|
||||||
|
switch (cmd)
|
||||||
|
{
|
||||||
|
case NIOCTL_GADDR:
|
||||||
|
/* get mac address */
|
||||||
|
if (args)
|
||||||
|
{
|
||||||
|
SMEMCPY(args, eth_device->dev_addr, 6);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
return -RT_ERROR;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
|
||||||
|
default :
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
return RT_EOK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void phy_monitor_thread_entry(void *parameter)
|
||||||
|
{
|
||||||
|
static rt_uint32_t phy_status = 0;
|
||||||
|
rt_uint32_t phy_status_now = 0;
|
||||||
|
|
||||||
|
while (1)
|
||||||
|
{
|
||||||
|
phy_status_now = Cy_EPHY_GetLinkStatus(&ifx_eth_device.phy_obj);
|
||||||
|
if(phy_status_now != phy_status)
|
||||||
|
{
|
||||||
|
if(phy_status_now == 1UL)
|
||||||
|
{
|
||||||
|
rt_kprintf("Link Up\n");
|
||||||
|
eth_device_linkchange(&ifx_eth_device.parent, RT_TRUE);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
rt_kprintf("Link Dowm\n");
|
||||||
|
eth_device_linkchange(&ifx_eth_device.parent, RT_FALSE);
|
||||||
|
}
|
||||||
|
phy_status = phy_status_now;
|
||||||
|
}
|
||||||
|
rt_thread_mdelay(1000);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static cy_en_ethif_speed_sel_t ecm_config_to_speed_sel( cy_ecm_phy_config_t *config)
|
||||||
|
{
|
||||||
|
cy_en_ethif_speed_sel_t speed_sel;
|
||||||
|
|
||||||
|
if( config->interface_speed_type == CY_ECM_SPEED_TYPE_MII)
|
||||||
|
{
|
||||||
|
speed_sel = (cy_en_ethif_speed_sel_t)config->phy_speed;
|
||||||
|
}
|
||||||
|
else if( config->interface_speed_type == CY_ECM_SPEED_TYPE_GMII)
|
||||||
|
{
|
||||||
|
speed_sel = CY_ETHIF_CTL_GMII_1000;
|
||||||
|
}
|
||||||
|
else if( config->interface_speed_type == CY_ECM_SPEED_TYPE_RGMII)
|
||||||
|
{
|
||||||
|
if(config->phy_speed == CY_ECM_PHY_SPEED_10M)
|
||||||
|
{
|
||||||
|
speed_sel = CY_ETHIF_CTL_RGMII_10;
|
||||||
|
}
|
||||||
|
else if(config->phy_speed == CY_ECM_PHY_SPEED_100M)
|
||||||
|
{
|
||||||
|
speed_sel = CY_ETHIF_CTL_RGMII_100;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
speed_sel = CY_ETHIF_CTL_RGMII_1000;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
speed_sel = (config->phy_speed == CY_ECM_PHY_SPEED_10M)?CY_ETHIF_CTL_RMII_10 : CY_ETHIF_CTL_RMII_100;
|
||||||
|
}
|
||||||
|
|
||||||
|
return speed_sel;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void eth_clock_config(cy_en_ethif_speed_sel_t speed_sel, cy_ecm_phy_speed_t phy_speed)
|
||||||
|
{
|
||||||
|
if((speed_sel == CY_ETHIF_CTL_MII_10) && (phy_speed == CY_ECM_PHY_SPEED_10M))
|
||||||
|
stcWrapperConfig.stcInterfaceSel = CY_ETHIF_CTL_MII_10; /** 10 Mbps MII */
|
||||||
|
else if((speed_sel == CY_ETHIF_CTL_MII_100) && (phy_speed == CY_ECM_PHY_SPEED_100M))
|
||||||
|
stcWrapperConfig.stcInterfaceSel = CY_ETHIF_CTL_MII_100; /** 100 Mbps MII */
|
||||||
|
else if((speed_sel == CY_ETHIF_CTL_GMII_1000) && (phy_speed == CY_ECM_PHY_SPEED_1000M))
|
||||||
|
stcWrapperConfig.stcInterfaceSel = CY_ETHIF_CTL_GMII_1000; /** 1000 Mbps GMII */
|
||||||
|
else if((speed_sel == CY_ETHIF_CTL_RGMII_10) && (phy_speed == CY_ECM_PHY_SPEED_10M))
|
||||||
|
stcWrapperConfig.stcInterfaceSel = CY_ETHIF_CTL_RGMII_10; /** 10 Mbps RGMII */
|
||||||
|
else if((speed_sel == CY_ETHIF_CTL_RGMII_100) && (phy_speed == CY_ECM_PHY_SPEED_100M))
|
||||||
|
stcWrapperConfig.stcInterfaceSel = CY_ETHIF_CTL_RGMII_100; /** 100 Mbps RGMII */
|
||||||
|
else if((speed_sel == CY_ETHIF_CTL_RGMII_1000) && (phy_speed == CY_ECM_PHY_SPEED_1000M))
|
||||||
|
stcWrapperConfig.stcInterfaceSel = CY_ETHIF_CTL_RGMII_1000; /** 1000 Mbps RGMII */
|
||||||
|
else if((speed_sel == CY_ETHIF_CTL_RMII_10) && (phy_speed == CY_ECM_PHY_SPEED_10M))
|
||||||
|
stcWrapperConfig.stcInterfaceSel = CY_ETHIF_CTL_RMII_10; /** 10 Mbps RMII */
|
||||||
|
else if((speed_sel == CY_ETHIF_CTL_RMII_100) && (phy_speed == CY_ECM_PHY_SPEED_100M))
|
||||||
|
stcWrapperConfig.stcInterfaceSel = CY_ETHIF_CTL_RMII_100; /** 100 Mbps RMII */
|
||||||
|
else
|
||||||
|
stcWrapperConfig.stcInterfaceSel = CY_ETHIF_CTL_RGMII_1000; /** Error in configuration */
|
||||||
|
|
||||||
|
stcWrapperConfig.bRefClockSource = CY_ETHIF_EXTERNAL_HSIO; /** Assigning Ref_Clk to HSIO clock; use an external clock from HSIO */
|
||||||
|
|
||||||
|
if(phy_speed == CY_ECM_PHY_SPEED_10M)
|
||||||
|
stcWrapperConfig.u8RefClkDiv = 10; /** RefClk: 25 MHz; divide Refclock by 10 to have a 2.5-MHz Tx clock */
|
||||||
|
else if(phy_speed == CY_ECM_PHY_SPEED_100M)
|
||||||
|
stcWrapperConfig.u8RefClkDiv = 1; /** RefClk: 25 MHz; divide Refclock by 1 to have a 25-MHz Tx clock */
|
||||||
|
else if(phy_speed == CY_ECM_PHY_SPEED_1000M)
|
||||||
|
stcWrapperConfig.u8RefClkDiv = 1; /** RefClk: 25 MHz; divide Refclock by 1 to have a 25-MHz Tx clock */
|
||||||
|
else /*(phy_speed == CY_ECM_PHY_SPEED_1000M)*/
|
||||||
|
stcWrapperConfig.u8RefClkDiv = 1; /** RefClk: 125 MHz; divide Refclock by 1 to have a 125-MHz Tx clock || Although only relevant in RGMII/GMII modes */
|
||||||
|
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* 读取PHY芯片函数 */
|
||||||
|
void phyRead(uint32_t phyId, uint32_t regAddress, uint32_t *value)
|
||||||
|
{
|
||||||
|
*value = Cy_ETHIF_PhyRegRead(ETH_REG_BASE, regAddress, phyId);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* 写入PHY芯片函数 */
|
||||||
|
void phyWrite(uint32_t phyId, uint32_t regAddress, uint32_t value)
|
||||||
|
{
|
||||||
|
Cy_ETHIF_PhyRegWrite(ETH_REG_BASE, regAddress, value, phyId);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* GPIO 初始化 */
|
||||||
|
static void ethernet_portpins_init (cy_ecm_speed_type_t interface_speed_type)
|
||||||
|
{
|
||||||
|
(void)interface_speed_type;
|
||||||
|
Cy_GPIO_Pin_Init(ETHx_TD0_PORT, ETHx_TD0_PIN, ðx_tx0); /** TX0 */
|
||||||
|
Cy_GPIO_Pin_Init(ETHx_TD1_PORT, ETHx_TD1_PIN, ðx_tx1); /** TX1 */
|
||||||
|
Cy_GPIO_Pin_Init(ETHx_TD2_PORT, ETHx_TD2_PIN, ðx_tx2); /** TX2 */
|
||||||
|
Cy_GPIO_Pin_Init(ETHx_TD3_PORT, ETHx_TD3_PIN, ðx_tx3); /** TX3 */
|
||||||
|
|
||||||
|
Cy_GPIO_Pin_Init(ETHx_TX_CTL_PORT, ETHx_TX_CTL_PIN, ðx_txctl); /** TX_CTL */
|
||||||
|
|
||||||
|
Cy_GPIO_Pin_Init(ETHx_RD0_PORT, ETHx_RD0_PIN, ðx_rx0); /** RX0 */
|
||||||
|
Cy_GPIO_Pin_Init(ETHx_RD1_PORT, ETHx_RD1_PIN, ðx_rx1); /** RX1 */
|
||||||
|
Cy_GPIO_Pin_Init(ETHx_RD2_PORT, ETHx_RD2_PIN, ðx_rx2); /** RX2 */
|
||||||
|
Cy_GPIO_Pin_Init(ETHx_RD3_PORT, ETHx_RD3_PIN, ðx_rx3); /** RX3 */
|
||||||
|
|
||||||
|
Cy_GPIO_Pin_Init(ETHx_RX_CTL_PORT, ETHx_RX_CTL_PIN, ðx_rxctl); /** RX_CTL */
|
||||||
|
|
||||||
|
Cy_GPIO_Pin_Init(ETHx_REF_CLK_PORT, ETHx_REF_CLK_PIN, ðx_refclk); /** REF_CLK */
|
||||||
|
|
||||||
|
Cy_GPIO_Pin_Init(ETHx_TX_CLK_PORT, ETHx_TX_CLK_PIN, ðx_txclk); /** TX_CLK */
|
||||||
|
Cy_GPIO_Pin_Init(ETHx_RX_CLK_PORT, ETHx_RX_CLK_PIN, ðx_rxclk); /** RX_CLK */
|
||||||
|
|
||||||
|
Cy_GPIO_Pin_Init(ETHx_MDC_PORT, ETHx_MDC_PIN, ðx_mdc); /** MDC */
|
||||||
|
Cy_GPIO_Pin_Init(ETHx_MDIO_PORT, ETHx_MDIO_PIN, ðx_mdio); /** MDIO */
|
||||||
|
}
|
||||||
|
|
||||||
|
/* PHY芯片初始化 */
|
||||||
|
static void init_phy_DP83867IR (ETH_Type *reg_base, cy_ecm_phy_config_t *ecm_phy_config, cy_stc_ephy_t *phy_obj)
|
||||||
|
{
|
||||||
|
cy_stc_ephy_config_t phyConfig;
|
||||||
|
cy_en_ethif_speed_sel_t speed_sel;
|
||||||
|
uint32_t value = 0;
|
||||||
|
uint16_t configured_hw_speed;
|
||||||
|
cy_en_ethif_status_t eth_status;
|
||||||
|
|
||||||
|
/* Driver configuration is already done */
|
||||||
|
if(is_driver_configured == true)
|
||||||
|
{
|
||||||
|
/* Initialize the PHY */
|
||||||
|
Cy_EPHY_Init(phy_obj, phyRead, phyWrite);
|
||||||
|
|
||||||
|
/* If driver already configured and the auto negotiation is enabled, replace the speed and mode by the auto negotiated values decided during driver initialization */
|
||||||
|
if(ecm_phy_config->mode == CY_ECM_DUPLEX_AUTO || ecm_phy_config->phy_speed == CY_ECM_PHY_SPEED_AUTO)
|
||||||
|
{
|
||||||
|
phyRead( 0, REGISTER_ADDRESS_PHY_REG_BMCR, &value );
|
||||||
|
cy_ecm_log_msg( CYLF_MIDDLEWARE, CY_LOG_ERR, "REGISTER_ADDRESS_PHY_REG_BMCR = 0x%X\n", (unsigned long)value );
|
||||||
|
ecm_phy_config->mode = ((value & (REGISTER_PHY_REG_DUPLEX_MASK)) == 0) ? CY_ECM_DUPLEX_HALF : CY_ECM_DUPLEX_FULL;
|
||||||
|
configured_hw_speed = value & (REGISTER_PHY_REG_SPEED_MASK);
|
||||||
|
if(configured_hw_speed == REGISTER_PHY_REG_SPEED_MASK_10M)
|
||||||
|
{
|
||||||
|
ecm_phy_config->phy_speed = CY_ECM_PHY_SPEED_10M;
|
||||||
|
}
|
||||||
|
else if (configured_hw_speed == REGISTER_PHY_REG_SPEED_MASK_100M)
|
||||||
|
{
|
||||||
|
ecm_phy_config->phy_speed = CY_ECM_PHY_SPEED_100M;
|
||||||
|
}
|
||||||
|
else if(configured_hw_speed == REGISTER_PHY_REG_SPEED_MASK_1000M)
|
||||||
|
{
|
||||||
|
ecm_phy_config->phy_speed = CY_ECM_PHY_SPEED_1000M;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if(!is_driver_configured)
|
||||||
|
{
|
||||||
|
/* Auto Negotiation enable */
|
||||||
|
if(ecm_phy_config->phy_speed == CY_ECM_PHY_SPEED_AUTO || ecm_phy_config->mode == CY_ECM_DUPLEX_AUTO)
|
||||||
|
{
|
||||||
|
eth_status = Cy_ETHIF_MdioInit(reg_base, &stcENETConfig);
|
||||||
|
if (CY_ETHIF_SUCCESS != eth_status)
|
||||||
|
{
|
||||||
|
cy_ecm_log_msg( CYLF_MIDDLEWARE, CY_LOG_DEBUG, "Ethernet MAC Pre-Init failed with ethStatus=0x%X \n", eth_status );
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
cy_ecm_log_msg( CYLF_MIDDLEWARE, CY_LOG_DEBUG, "Ethernet MAC Pre-Init success \n", 0);
|
||||||
|
|
||||||
|
/* Start auto negotiation */
|
||||||
|
phyConfig.speed = (cy_en_ephy_speed_t)CY_ECM_PHY_SPEED_AUTO;
|
||||||
|
phyConfig.duplex = (cy_en_ephy_duplex_t)CY_ECM_DUPLEX_AUTO;
|
||||||
|
|
||||||
|
/* Initialize the PHY */
|
||||||
|
Cy_EPHY_Init(phy_obj, phyRead, phyWrite);
|
||||||
|
|
||||||
|
Cy_EPHY_Configure( phy_obj, &phyConfig );
|
||||||
|
/* Required some delay to get PHY back to Run state */
|
||||||
|
cy_rtos_delay_milliseconds(100);
|
||||||
|
|
||||||
|
while (Cy_EPHY_GetAutoNegotiationStatus(phy_obj) != true)
|
||||||
|
{
|
||||||
|
cy_rtos_delay_milliseconds(100);
|
||||||
|
}
|
||||||
|
|
||||||
|
Cy_EPHY_getLinkPartnerCapabilities(phy_obj, &phyConfig);
|
||||||
|
ecm_phy_config->phy_speed = (cy_ecm_phy_speed_t)phyConfig.speed;
|
||||||
|
ecm_phy_config->mode = (cy_ecm_duplex_t)phyConfig.duplex;
|
||||||
|
}
|
||||||
|
|
||||||
|
speed_sel = ecm_config_to_speed_sel(ecm_phy_config);
|
||||||
|
|
||||||
|
/* Update the configuration based on user input */
|
||||||
|
eth_clock_config(speed_sel, ecm_phy_config->phy_speed);
|
||||||
|
|
||||||
|
/** Initialize ENET MAC */
|
||||||
|
eth_status = Cy_ETHIF_Init(reg_base, &stcENETConfig, &stcInterruptConfig);
|
||||||
|
if (CY_ETHIF_SUCCESS != eth_status)
|
||||||
|
{
|
||||||
|
cy_ecm_log_msg( CYLF_MIDDLEWARE, CY_LOG_DEBUG, "Ethernet MAC Init failed with ethStatus=0x%X \n", eth_status );
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
if(!(ecm_phy_config->phy_speed == CY_ECM_PHY_SPEED_AUTO || ecm_phy_config->mode == CY_ECM_DUPLEX_AUTO))
|
||||||
|
{
|
||||||
|
/* Initialize the PHY */
|
||||||
|
Cy_EPHY_Init(phy_obj, phyRead, phyWrite);
|
||||||
|
}
|
||||||
|
is_driver_configured = true;
|
||||||
|
}
|
||||||
|
cy_ecm_log_msg( CYLF_MIDDLEWARE, CY_LOG_DEBUG, "Register driver callbacks \n", 0);
|
||||||
|
stcInterruptCB.rxframecb = cy_process_ethernet_data_cb;
|
||||||
|
|
||||||
|
/* Reset the PHY */
|
||||||
|
Cy_EPHY_Reset(phy_obj);
|
||||||
|
Cy_ETHIF_PhyRegWrite(reg_base, 0x1F, 0x8000, PHY_ADDR); /* Ext-Reg CTRl: Perform a full reset, including all registers */
|
||||||
|
cy_rtos_delay_milliseconds(30); /* Required delay of 30 ms to get PHY back to Run state after reset */
|
||||||
|
|
||||||
|
Cy_EPHY_Discover(phy_obj);
|
||||||
|
|
||||||
|
/* Check for supported PHYs */
|
||||||
|
if (PHY_ID_DP83867IR != phy_obj->phyId)
|
||||||
|
{
|
||||||
|
cy_ecm_log_msg( CYLF_MIDDLEWARE, CY_LOG_DEBUG, "Not supported physical ID \n", 0);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
phyConfig.duplex = ecm_phy_config->mode;
|
||||||
|
phyConfig.speed = ecm_phy_config->phy_speed;
|
||||||
|
|
||||||
|
Cy_EPHY_Configure(phy_obj, &phyConfig);
|
||||||
|
|
||||||
|
/* Enable PHY extended registers */
|
||||||
|
enable_phy_DP83867IR_extended_reg(reg_base, ecm_phy_config);
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
cy_rslt_t cy_eth_driver_initialization(ETH_Type *reg_base, cy_ecm_phy_config_t *ecm_phy_config, cy_stc_ephy_t *phy_obj)
|
||||||
|
{
|
||||||
|
cy_rslt_t result = CY_RSLT_SUCCESS;
|
||||||
|
uint32_t retry_count = 0;
|
||||||
|
|
||||||
|
cy_ecm_log_msg( CYLF_MIDDLEWARE, CY_LOG_DEBUG, "%s(): START \n", __FUNCTION__ );
|
||||||
|
|
||||||
|
/** Configure Ethernet port pins */
|
||||||
|
ethernet_portpins_init(ecm_phy_config->interface_speed_type);
|
||||||
|
|
||||||
|
cy_ecm_log_msg( CYLF_MIDDLEWARE, CY_LOG_DEBUG, "GPIO_INIT_FINISH \n", __FUNCTION__ );
|
||||||
|
|
||||||
|
Cy_SysInt_Init(&irq_cfg_ethx_q0, Cy_Ethx_InterruptHandler);
|
||||||
|
Cy_SysInt_Init(&irq_cfg_ethx_q1, Cy_Ethx_InterruptHandler);
|
||||||
|
Cy_SysInt_Init(&irq_cfg_ethx_q2, Cy_Ethx_InterruptHandler);
|
||||||
|
|
||||||
|
cy_ecm_log_msg( CYLF_MIDDLEWARE, CY_LOG_DEBUG, "ETH_REG_BASE=[%p] reg_base = [%p] \n", ETH_REG_BASE, reg_base );
|
||||||
|
|
||||||
|
/* rx Q0 buffer pool */
|
||||||
|
stcENETConfig.pRxQbuffPool[0] = (cy_ethif_buffpool_t *)&pRx_Q_buff_pool;
|
||||||
|
stcENETConfig.pRxQbuffPool[1] = NULL;
|
||||||
|
|
||||||
|
/** Initialize PHY */
|
||||||
|
init_phy_DP83867IR(reg_base, ecm_phy_config, phy_obj);
|
||||||
|
|
||||||
|
NVIC_ClearPendingIRQ(NvicMux3_IRQn);
|
||||||
|
NVIC_EnableIRQ(NvicMux3_IRQn);
|
||||||
|
|
||||||
|
Cy_ETHIF_RegisterCallbacks(reg_base, &stcInterruptCB);
|
||||||
|
|
||||||
|
cy_ecm_log_msg( CYLF_MIDDLEWARE, CY_LOG_DEBUG, "%s():retry_count:[%d] END \n", __FUNCTION__, retry_count );
|
||||||
|
|
||||||
|
return result;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void enable_phy_DP83867IR_extended_reg(ETH_Type *reg_base, cy_ecm_phy_config_t *ecm_phy_config)
|
||||||
|
{
|
||||||
|
if(ecm_phy_config->phy_speed == CY_ECM_PHY_SPEED_100M)
|
||||||
|
{
|
||||||
|
Cy_ETHIF_PhyRegWrite(reg_base, 0x10, 0x5028, PHY_ADDR); /** Disable auto negotiation for MDI/MDI-X **/
|
||||||
|
}
|
||||||
|
else if(ecm_phy_config->phy_speed == CY_ECM_PHY_SPEED_1000M || ecm_phy_config->phy_speed == CY_ECM_PHY_SPEED_AUTO)
|
||||||
|
{
|
||||||
|
uint32_t u32ReadData;
|
||||||
|
Cy_ETHIF_PhyRegWrite(reg_base, 0x0D, 0x001F, PHY_ADDR); /** Begin write access to the extended register */
|
||||||
|
Cy_ETHIF_PhyRegWrite(reg_base, 0x0E, 0x0170, PHY_ADDR);
|
||||||
|
Cy_ETHIF_PhyRegWrite(reg_base, 0x0D, 0x401F, PHY_ADDR);
|
||||||
|
u32ReadData = Cy_ETHIF_PhyRegRead(reg_base, (uint8_t)0x0E, PHY_ADDR);
|
||||||
|
u32ReadData = u32ReadData & 0x0000; /** Change the I/O impedance on the PHY */
|
||||||
|
u32ReadData = u32ReadData | 0x010C;
|
||||||
|
Cy_ETHIF_PhyRegWrite(reg_base, 0x0E, u32ReadData, PHY_ADDR); /** Enable clock from the PHY -> Route it to the MCU */
|
||||||
|
u32ReadData = Cy_ETHIF_PhyRegRead(reg_base, (uint8_t)0x0E, PHY_ADDR);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
/* Do nothing */
|
||||||
|
}
|
||||||
|
|
||||||
|
/** Disable RGMII by accessing the extended register set || Please read datasheet section 8.4.2.1 for the procedure in detail */
|
||||||
|
Cy_ETHIF_PhyRegWrite(reg_base, 0x0D, 0x001F, PHY_ADDR); /** REGCR */
|
||||||
|
Cy_ETHIF_PhyRegWrite(reg_base, 0x0E, 0x0032, PHY_ADDR); /** ADDAR, 0x0032 RGMII config register */
|
||||||
|
Cy_ETHIF_PhyRegWrite(reg_base, 0x0D, 0x401F, PHY_ADDR); /** REGCR; will force the next write/read access non-incremental */
|
||||||
|
|
||||||
|
if(ecm_phy_config->interface_speed_type != CY_ECM_SPEED_TYPE_RGMII)
|
||||||
|
{
|
||||||
|
Cy_ETHIF_PhyRegWrite(reg_base, 0x0E, 0x0000, PHY_ADDR); /** Disable RGMII */
|
||||||
|
Cy_ETHIF_PhyRegRead(reg_base, (uint8_t)0x0E, PHY_ADDR); /** Read RGMII mode status */
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
Cy_ETHIF_PhyRegWrite(reg_base, 0x0E, 0x00D3, PHY_ADDR); /** Enable Tx and RX clock delay in the RGMII configuration register */
|
||||||
|
|
||||||
|
Cy_ETHIF_PhyRegWrite(reg_base, 0x0D, 0x001F, PHY_ADDR); /** REGCR */
|
||||||
|
Cy_ETHIF_PhyRegWrite(reg_base, 0x0E, 0x0086, PHY_ADDR); /** ADDAR; 0x0086 delay config register */
|
||||||
|
Cy_ETHIF_PhyRegWrite(reg_base, 0x0D, 0x401F, PHY_ADDR); /** REGCR; will force the next write/read access non-incremental */
|
||||||
|
Cy_ETHIF_PhyRegWrite(reg_base, 0x0E, 0x0066, PHY_ADDR); /** Adjust Tx and Rx clock delays in the PHY */
|
||||||
|
}/* EMAC_INTERFACE != EMAC_RGMII */
|
||||||
|
|
||||||
|
Cy_ETHIF_PhyRegWrite(reg_base, 0x1F, 0x4000, PHY_ADDR); /** CTRL */
|
||||||
|
cy_rtos_delay_milliseconds(30);/** Some more delay to get the PHY adapted to new interface */
|
||||||
|
Cy_ETHIF_PhyRegRead(reg_base, (uint8_t)0x11, PHY_ADDR);
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_err_t rt_ifx_eth_init(rt_device_t dev)
|
||||||
|
{
|
||||||
|
rt_err_t state = RT_EOK;
|
||||||
|
cy_ecm_phy_config_t phy_interface_type;
|
||||||
|
|
||||||
|
ifx_eth_device.eth_base_type = ETH_INTERFACE_TYPE;
|
||||||
|
cy_ecm_log_msg( CYLF_MIDDLEWARE, CY_LOG_INFO, "Device's eth_base_type is:%d\n", ETH_INTERFACE_TYPE);
|
||||||
|
|
||||||
|
phy_interface_type.interface_speed_type = CY_ECM_SPEED_TYPE_RGMII;
|
||||||
|
phy_interface_type.phy_speed = CY_ECM_PHY_SPEED_1000M;
|
||||||
|
phy_interface_type.mode = CY_ECM_DUPLEX_FULL;
|
||||||
|
cy_ecm_log_msg( CYLF_MIDDLEWARE, CY_LOG_INFO, "Using default phy_interface_type\nType :%d\nSpeed :%d\nMode :%d\n"
|
||||||
|
,phy_interface_type.interface_speed_type
|
||||||
|
,phy_interface_type.phy_speed
|
||||||
|
,phy_interface_type.mode);
|
||||||
|
|
||||||
|
cy_eth_driver_initialization(ifx_eth_device.eth_base_type, &phy_interface_type, &(ifx_eth_device.phy_obj));
|
||||||
|
|
||||||
|
return state;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int rt_hw_ifx_eth_init(void)
|
||||||
|
{
|
||||||
|
rt_err_t result = RT_EOK;
|
||||||
|
|
||||||
|
recv_frame_buffer_addr_mb = rt_mb_create("Eth_rx_mb", Eth_Mempool_Num, RT_IPC_FLAG_PRIO);
|
||||||
|
if(recv_frame_buffer_addr_mb == RT_NULL)
|
||||||
|
{
|
||||||
|
LOG_I("Eth MailBox Init Fail");
|
||||||
|
}
|
||||||
|
|
||||||
|
for(rt_uint8_t i = 0; i < CY_ETH_DEFINE_TOTAL_BD_PER_RXQUEUE; i++)
|
||||||
|
{
|
||||||
|
pRx_Q_buff_pool[i] = rt_malloc(sizeof(uint8) * CY_ETH_SIZE_MAX_FRAME);
|
||||||
|
}
|
||||||
|
|
||||||
|
ifx_eth_device.dev_addr[0] = 0x00;
|
||||||
|
ifx_eth_device.dev_addr[1] = 0x03;
|
||||||
|
ifx_eth_device.dev_addr[2] = 0x19;
|
||||||
|
ifx_eth_device.dev_addr[3] = 0x45;
|
||||||
|
ifx_eth_device.dev_addr[4] = 0x00;
|
||||||
|
ifx_eth_device.dev_addr[5] = 0x00;
|
||||||
|
cy_ecm_log_msg( CYLF_MIDDLEWARE, CY_LOG_INFO, "Assigning default MAC address 00-03-19-45-00-00\n", 0);
|
||||||
|
|
||||||
|
ifx_eth_device.parent.parent.init = rt_ifx_eth_init;
|
||||||
|
ifx_eth_device.parent.parent.open = rt_ifx_eth_open;
|
||||||
|
ifx_eth_device.parent.parent.close = rt_ifx_eth_close;
|
||||||
|
ifx_eth_device.parent.parent.read = rt_ifx_eth_read;
|
||||||
|
ifx_eth_device.parent.parent.write = rt_ifx_eth_write;
|
||||||
|
ifx_eth_device.parent.parent.control = rt_ifx_eth_control;
|
||||||
|
ifx_eth_device.parent.parent.user_data = RT_NULL;
|
||||||
|
|
||||||
|
ifx_eth_device.parent.eth_rx = rt_ifx_eth_rx;
|
||||||
|
ifx_eth_device.parent.eth_tx = rt_ifx_eth_tx;
|
||||||
|
|
||||||
|
result = eth_device_init(&(ifx_eth_device.parent), "e0");
|
||||||
|
if(result != RT_EOK)
|
||||||
|
{
|
||||||
|
LOG_E("emac device init faild: %d", result);
|
||||||
|
result = -RT_ERROR;
|
||||||
|
return result;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
LOG_D("emac device init success");
|
||||||
|
}
|
||||||
|
|
||||||
|
rt_thread_t tid;
|
||||||
|
tid = rt_thread_create("phy",
|
||||||
|
phy_monitor_thread_entry,
|
||||||
|
RT_NULL,
|
||||||
|
1024,
|
||||||
|
RT_THREAD_PRIORITY_MAX - 2,
|
||||||
|
2);
|
||||||
|
if (tid != RT_NULL)
|
||||||
|
{
|
||||||
|
rt_thread_startup(tid);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
LOG_E("phy thread init faild: %d", result);
|
||||||
|
result = -RT_ERROR;
|
||||||
|
return result;
|
||||||
|
}
|
||||||
|
|
||||||
|
return result;
|
||||||
|
}
|
||||||
|
INIT_DEVICE_EXPORT(rt_hw_ifx_eth_init);
|
||||||
|
|
@ -0,0 +1,92 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2024-09-23 LZerro first version
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __DRV_ETH_H__
|
||||||
|
#define __DRV_ETH_H__
|
||||||
|
|
||||||
|
#include <rtthread.h>
|
||||||
|
#include <rthw.h>
|
||||||
|
#include <rtdevice.h>
|
||||||
|
#include <board.h>
|
||||||
|
#include "eth_config.h"
|
||||||
|
|
||||||
|
/* The PHY basic control register */
|
||||||
|
#define PHY_BASIC_CONTROL_REG 0x00U
|
||||||
|
#define PHY_RESET_MASK (1<<15)
|
||||||
|
#define PHY_AUTO_NEGOTIATION_MASK (1<<12)
|
||||||
|
|
||||||
|
/* The PHY basic status register */
|
||||||
|
#define PHY_BASIC_STATUS_REG 0x01U
|
||||||
|
#define PHY_LINKED_STATUS_MASK (1<<2)
|
||||||
|
#define PHY_AUTONEGO_COMPLETE_MASK (1<<5)
|
||||||
|
|
||||||
|
/* The PHY ID one register */
|
||||||
|
#define PHY_ID1_REG 0x02U
|
||||||
|
/* The PHY ID two register */
|
||||||
|
#define PHY_ID2_REG 0x03U
|
||||||
|
/* The PHY auto-negotiate advertise register */
|
||||||
|
#define PHY_AUTONEG_ADVERTISE_REG 0x04U
|
||||||
|
|
||||||
|
/** PHY duplex mode */
|
||||||
|
typedef enum
|
||||||
|
{
|
||||||
|
CY_ECM_DUPLEX_HALF, /**< Half duplex */
|
||||||
|
CY_ECM_DUPLEX_FULL, /**< Full duplex */
|
||||||
|
CY_ECM_DUPLEX_AUTO /**< Both half/full duplex */
|
||||||
|
} cy_ecm_duplex_t;
|
||||||
|
|
||||||
|
/** PHY speed */
|
||||||
|
typedef enum
|
||||||
|
{
|
||||||
|
CY_ECM_PHY_SPEED_10M, /**< 10 Mbps */
|
||||||
|
CY_ECM_PHY_SPEED_100M, /**< 100 Mbps */
|
||||||
|
CY_ECM_PHY_SPEED_1000M, /**< 1000 Mbps */
|
||||||
|
CY_ECM_PHY_SPEED_AUTO /**< All 10/100/1000 Mbps */
|
||||||
|
} cy_ecm_phy_speed_t;
|
||||||
|
|
||||||
|
/** Standard interface type */
|
||||||
|
typedef enum
|
||||||
|
{
|
||||||
|
CY_ECM_SPEED_TYPE_MII, /**< Media-Independent Interface (MII) */
|
||||||
|
CY_ECM_SPEED_TYPE_GMII, /**< Gigabit Media-Independent Interface (GMII) */
|
||||||
|
CY_ECM_SPEED_TYPE_RGMII, /**< Reduced Gigabit Media-Independent Interface (RGMII) */
|
||||||
|
CY_ECM_SPEED_TYPE_RMII /**< Reduced Media-Independent Interface (RMII) */
|
||||||
|
} cy_ecm_speed_type_t;
|
||||||
|
|
||||||
|
typedef struct
|
||||||
|
{
|
||||||
|
cy_ecm_speed_type_t interface_speed_type; /**< Standard interface to be used for data transfer */
|
||||||
|
cy_ecm_phy_speed_t phy_speed; /**< Physical transfer speed */
|
||||||
|
cy_ecm_duplex_t mode; /**< Transfer mode */
|
||||||
|
} cy_ecm_phy_config_t;
|
||||||
|
|
||||||
|
extern int eth_index_internal;
|
||||||
|
|
||||||
|
|
||||||
|
#define ETH_INTERFACE_TYPE ETH1
|
||||||
|
|
||||||
|
/* After hardware initialization, max wait time to get the physical link up */
|
||||||
|
#define MAX_WAIT_ETHERNET_PHY_STATUS (10000)
|
||||||
|
|
||||||
|
#define REGISTER_ADDRESS_PHY_REG_BMCR PHYREG_00_BMCR /* BMCR register (0x0000) to read the speed and duplex mode */
|
||||||
|
#define REGISTER_PHY_REG_DUPLEX_MASK PHYBMCR_FULL_DUPLEX_Msk /* Bit 8 of BMCR register to read the duplex mode */
|
||||||
|
#define REGISTER_PHY_REG_SPEED_MASK (0x2040) /* Bit 6, 13: BMCR register to read the speed */
|
||||||
|
#define REGISTER_PHY_REG_SPEED_MASK_10M (0x0000) /* Bit 6, 13: Both are set to 0 for 10M speed */
|
||||||
|
#define REGISTER_PHY_REG_SPEED_MASK_100M (0x2000) /* Bit 6, 13: Set to 0 and 1 respectively for 100M speed */
|
||||||
|
#define REGISTER_PHY_REG_SPEED_MASK_1000M (0x0040) /* Bit 6, 13: Set to 1 and 0 respectively for 1000M speed */
|
||||||
|
|
||||||
|
#endif /* __DRV_ETH_H__ */
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
@ -13,7 +13,7 @@
|
||||||
#include <board.h>
|
#include <board.h>
|
||||||
#ifdef BSP_USING_TIM
|
#ifdef BSP_USING_TIM
|
||||||
|
|
||||||
//#define DRV_DEBUG
|
/*#define DRV_DEBUG*/
|
||||||
#define LOG_TAG "drv.hwtimer"
|
#define LOG_TAG "drv.hwtimer"
|
||||||
#include <drv_log.h>
|
#include <drv_log.h>
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
@ -101,7 +101,8 @@ static struct ifx_i2c_config i2c_config[] =
|
||||||
#endif
|
#endif
|
||||||
};
|
};
|
||||||
|
|
||||||
static struct ifx_i2c i2c_objs[sizeof(i2c_config) / sizeof(i2c_config[0])] = {0};
|
static struct ifx_i2c i2c_objs[sizeof(i2c_config) / sizeof(i2c_config[0])] =
|
||||||
|
{0};
|
||||||
|
|
||||||
static int ifx_i2c_read(struct ifx_i2c *hi2c, rt_uint16_t slave_address, rt_uint8_t *p_buffer, rt_uint16_t data_byte)
|
static int ifx_i2c_read(struct ifx_i2c *hi2c, rt_uint16_t slave_address, rt_uint8_t *p_buffer, rt_uint16_t data_byte)
|
||||||
{
|
{
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
@ -14,7 +14,7 @@
|
||||||
#include <drivers/dev_pwm.h>
|
#include <drivers/dev_pwm.h>
|
||||||
#include "drv_gpio.h"
|
#include "drv_gpio.h"
|
||||||
|
|
||||||
//#define DRV_DEBUG
|
/*#define DRV_DEBUG*/
|
||||||
#define LOG_TAG "drv.pwm"
|
#define LOG_TAG "drv.pwm"
|
||||||
#include <drv_log.h>
|
#include <drv_log.h>
|
||||||
|
|
||||||
|
|
@ -89,12 +89,12 @@ static rt_err_t drv_pwm_enable(cyhal_pwm_t *htim, struct rt_pwm_configuration *c
|
||||||
{
|
{
|
||||||
if (!enable)
|
if (!enable)
|
||||||
{
|
{
|
||||||
htim->tcpwm.resource.channel_num = channel;
|
htim->tcpwm.resource.channel_num = channel;
|
||||||
cyhal_pwm_stop(htim);
|
cyhal_pwm_stop(htim);
|
||||||
}
|
}
|
||||||
else
|
else
|
||||||
{
|
{
|
||||||
htim->tcpwm.resource.channel_num = channel;
|
htim->tcpwm.resource.channel_num = channel;
|
||||||
cyhal_pwm_start(htim);
|
cyhal_pwm_start(htim);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
@ -15,7 +15,7 @@
|
||||||
|
|
||||||
#ifdef BSP_USING_RTC
|
#ifdef BSP_USING_RTC
|
||||||
|
|
||||||
//#define DRV_DEBUG
|
/*#define DRV_DEBUG*/
|
||||||
#define LOG_TAG "drv.rtc"
|
#define LOG_TAG "drv.rtc"
|
||||||
#include <drv_log.h>
|
#include <drv_log.h>
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
@ -15,7 +15,7 @@
|
||||||
|
|
||||||
#ifdef BSP_USING_SDCARD
|
#ifdef BSP_USING_SDCARD
|
||||||
|
|
||||||
//#define DRV_DEBUG
|
/*#define DRV_DEBUG*/
|
||||||
#define LOG_TAG "drv.sdio"
|
#define LOG_TAG "drv.sdio"
|
||||||
#include <drv_log.h>
|
#include <drv_log.h>
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
@ -13,7 +13,7 @@
|
||||||
|
|
||||||
#ifdef RT_USING_I2C
|
#ifdef RT_USING_I2C
|
||||||
|
|
||||||
//#define DRV_DEBUG
|
/*#define DRV_DEBUG*/
|
||||||
#define LOG_TAG "drv.i2c"
|
#define LOG_TAG "drv.i2c"
|
||||||
#include <drv_log.h>
|
#include <drv_log.h>
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
@ -13,7 +13,7 @@
|
||||||
|
|
||||||
#ifdef RT_USING_SPI
|
#ifdef RT_USING_SPI
|
||||||
|
|
||||||
//#define DRV_DEBUG
|
/*#define DRV_DEBUG*/
|
||||||
#define DBG_TAG "drv.spi"
|
#define DBG_TAG "drv.spi"
|
||||||
#ifdef DRV_DEBUG
|
#ifdef DRV_DEBUG
|
||||||
#define DBG_LVL DBG_LOG
|
#define DBG_LVL DBG_LOG
|
||||||
|
|
@ -60,7 +60,8 @@ static struct ifx_spi_handle spi_bus_obj[] =
|
||||||
#endif
|
#endif
|
||||||
};
|
};
|
||||||
|
|
||||||
static struct ifx_spi spi_config[sizeof(spi_bus_obj) / sizeof(spi_bus_obj[0])] = {0};
|
static struct ifx_spi spi_config[sizeof(spi_bus_obj) / sizeof(spi_bus_obj[0])] =
|
||||||
|
{0};
|
||||||
|
|
||||||
/* private rt-thread spi ops function */
|
/* private rt-thread spi ops function */
|
||||||
static rt_err_t spi_configure(struct rt_spi_device *device, struct rt_spi_configuration *configuration);
|
static rt_err_t spi_configure(struct rt_spi_device *device, struct rt_spi_configuration *configuration);
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
@ -64,7 +64,8 @@ static struct ifx_uart_config uart_config[] =
|
||||||
#endif
|
#endif
|
||||||
};
|
};
|
||||||
|
|
||||||
static struct ifx_uart uart_obj[sizeof(uart_config) / sizeof(uart_config[0])] = {0};
|
static struct ifx_uart uart_obj[sizeof(uart_config) / sizeof(uart_config[0])] =
|
||||||
|
{0};
|
||||||
|
|
||||||
static void uart_isr(struct rt_serial_device *serial)
|
static void uart_isr(struct rt_serial_device *serial)
|
||||||
{
|
{
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
@ -12,7 +12,7 @@
|
||||||
|
|
||||||
#ifdef RT_USING_WDT
|
#ifdef RT_USING_WDT
|
||||||
|
|
||||||
//#define DRV_DEBUG
|
/*#define DRV_DEBUG*/
|
||||||
#define LOG_TAG "drv.wdt"
|
#define LOG_TAG "drv.wdt"
|
||||||
#include <drv_log.h>
|
#include <drv_log.h>
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,78 @@
|
||||||
|
#ifndef CY_ETH_USER_CONFIG
|
||||||
|
#define CY_ETH_USER_CONFIG
|
||||||
|
|
||||||
|
#include "cy_ethif.h"
|
||||||
|
#include "cy_ephy.h"
|
||||||
|
/*#include "cy_ecm.h"*/
|
||||||
|
|
||||||
|
#define CY_GIG_ETH_TYPE ETH1
|
||||||
|
#define CY_GIG_ETH_INSTANCE_NUM (1)
|
||||||
|
|
||||||
|
#define ETH_REG_BASE CY_GIG_ETH_TYPE
|
||||||
|
|
||||||
|
#define CY_GIG_ETH_TX_CLK_PORT GPIO_PRT26
|
||||||
|
#define CY_GIG_ETH_TX_CLK_PIN 2
|
||||||
|
#define CY_GIG_ETH_TX_CLK_PIN_MUX P26_2_ETH1_TX_CLK
|
||||||
|
|
||||||
|
#define CY_GIG_ETH_TX_CTL_PORT GPIO_PRT26
|
||||||
|
#define CY_GIG_ETH_TX_CTL_PIN 1
|
||||||
|
#define CY_GIG_ETH_TX_CTL_PIN_MUX P26_1_ETH1_TX_CTL
|
||||||
|
|
||||||
|
#define CY_GIG_ETH_TD0_PORT GPIO_PRT26
|
||||||
|
#define CY_GIG_ETH_TD0_PIN 3
|
||||||
|
#define CY_GIG_ETH_TD0_PIN_MUX P26_3_ETH1_TXD0
|
||||||
|
|
||||||
|
#define CY_GIG_ETH_TD1_PORT GPIO_PRT26
|
||||||
|
#define CY_GIG_ETH_TD1_PIN 4
|
||||||
|
#define CY_GIG_ETH_TD1_PIN_MUX P26_4_ETH1_TXD1
|
||||||
|
|
||||||
|
#define CY_GIG_ETH_TD2_PORT GPIO_PRT26
|
||||||
|
#define CY_GIG_ETH_TD2_PIN 5
|
||||||
|
#define CY_GIG_ETH_TD2_PIN_MUX P26_5_ETH1_TXD2
|
||||||
|
|
||||||
|
#define CY_GIG_ETH_TD3_PORT GPIO_PRT26
|
||||||
|
#define CY_GIG_ETH_TD3_PIN 6
|
||||||
|
#define CY_GIG_ETH_TD3_PIN_MUX P26_6_ETH1_TXD3
|
||||||
|
|
||||||
|
#define CY_GIG_ETH_RX_CLK_PORT GPIO_PRT27
|
||||||
|
#define CY_GIG_ETH_RX_CLK_PIN 4
|
||||||
|
#define CY_GIG_ETH_RX_CLK_PIN_MUX P27_4_ETH1_RX_CLK
|
||||||
|
|
||||||
|
#define CY_GIG_ETH_RX_CTL_PORT GPIO_PRT27
|
||||||
|
#define CY_GIG_ETH_RX_CTL_PIN 3
|
||||||
|
#define CY_GIG_ETH_RX_CTL_PIN_MUX P27_3_ETH1_RX_CTL
|
||||||
|
|
||||||
|
#define CY_GIG_ETH_RD0_PORT GPIO_PRT26
|
||||||
|
#define CY_GIG_ETH_RD0_PIN 7
|
||||||
|
#define CY_GIG_ETH_RD0_PIN_MUX P26_7_ETH1_RXD0
|
||||||
|
|
||||||
|
#define CY_GIG_ETH_RD1_PORT GPIO_PRT27
|
||||||
|
#define CY_GIG_ETH_RD1_PIN 0
|
||||||
|
#define CY_GIG_ETH_RD1_PIN_MUX P27_0_ETH1_RXD1
|
||||||
|
|
||||||
|
#define CY_GIG_ETH_RD2_PORT GPIO_PRT27
|
||||||
|
#define CY_GIG_ETH_RD2_PIN 1
|
||||||
|
#define CY_GIG_ETH_RD2_PIN_MUX P27_1_ETH1_RXD2
|
||||||
|
|
||||||
|
#define CY_GIG_ETH_RD3_PORT GPIO_PRT27
|
||||||
|
#define CY_GIG_ETH_RD3_PIN 2
|
||||||
|
#define CY_GIG_ETH_RD3_PIN_MUX P27_2_ETH1_RXD3
|
||||||
|
|
||||||
|
#define CY_GIG_ETH_MDC_PORT GPIO_PRT27
|
||||||
|
#define CY_GIG_ETH_MDC_PIN 6
|
||||||
|
#define CY_GIG_ETH_MDC_PIN_MUX P27_6_ETH1_MDC
|
||||||
|
|
||||||
|
#define CY_GIG_ETH_MDIO_PORT GPIO_PRT27
|
||||||
|
#define CY_GIG_ETH_MDIO_PIN 5
|
||||||
|
#define CY_GIG_ETH_MDIO_PIN_MUX P27_5_ETH1_MDIO
|
||||||
|
|
||||||
|
#define CY_GIG_ETH_REF_CLK_PORT GPIO_PRT26
|
||||||
|
#define CY_GIG_ETH_REF_CLK_PIN 0
|
||||||
|
#define CY_GIG_ETH_REF_CLK_PIN_MUX P26_0_ETH1_REF_CLK
|
||||||
|
|
||||||
|
/* Setup IRQ source for 0, 1, and 2 priority queue */
|
||||||
|
#define CY_GIG_ETH_IRQN0 eth_1_interrupt_eth_0_IRQn
|
||||||
|
#define CY_GIG_ETH_IRQN1 eth_1_interrupt_eth_1_IRQn
|
||||||
|
#define CY_GIG_ETH_IRQN2 eth_1_interrupt_eth_2_IRQn
|
||||||
|
|
||||||
|
#endif /* CY_ETH_USER_CONFIG */
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/*
|
/*
|
||||||
* Copyright (c) 2006-2023, RT-Thread Development Team
|
* Copyright (c) 2006-2024 RT-Thread Development Team
|
||||||
*
|
*
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
*
|
*
|
||||||
|
|
|
||||||
|
|
@ -37,6 +37,11 @@ menu "On-chip Peripheral Drivers"
|
||||||
range 0 7
|
range 0 7
|
||||||
default 3
|
default 3
|
||||||
endif
|
endif
|
||||||
|
|
||||||
|
config BSP_USING_ETH
|
||||||
|
bool "Enable ETH"
|
||||||
|
select RT_USING_ETH
|
||||||
|
default n
|
||||||
|
|
||||||
endmenu
|
endmenu
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue