Update application.c

code style clean
This commit is contained in:
geniusgogo 2017-08-30 21:13:46 +08:00 committed by GitHub
parent 189c999f8e
commit 8a06b07fc9
1 changed files with 66 additions and 63 deletions

View File

@ -10,20 +10,20 @@
void LED_Init(void)
{
struct port_config config_port_pin;
struct port_config config_port_pin;
port_get_config_defaults(&config_port_pin);
config_port_pin.direction = PORT_PIN_DIR_INPUT;
config_port_pin.input_pull = PORT_PIN_PULL_UP;
port_pin_set_config(PIN_PA15, &config_port_pin);
port_get_config_defaults(&config_port_pin);
config_port_pin.direction = PORT_PIN_DIR_INPUT;
config_port_pin.input_pull = PORT_PIN_PULL_UP;
port_pin_set_config(PIN_PA15, &config_port_pin);
config_port_pin.direction = PORT_PIN_DIR_OUTPUT;
port_pin_set_config(PIN_PB30, &config_port_pin);
config_port_pin.direction = PORT_PIN_DIR_OUTPUT;
port_pin_set_config(PIN_PB30, &config_port_pin);
}
void LED_ON(void)
{
port_pin_set_output_level(PIN_PB30, false);
port_pin_set_output_level(PIN_PB30, false);
}
void LED_OFF(void)
@ -36,106 +36,109 @@ void extint_detection_callback(void);
void configure_extint_channel(void)
{
//! [setup_1]
struct extint_chan_conf config_extint_chan;
struct extint_chan_conf config_extint_chan;
//! [setup_1]
//! [setup_2]
extint_chan_get_config_defaults(&config_extint_chan);
extint_chan_get_config_defaults(&config_extint_chan);
//! [setup_2]
//! [setup_3]
config_extint_chan.gpio_pin = PIN_PA15A_EIC_EXTINT15;
config_extint_chan.gpio_pin_mux = MUX_PA15A_EIC_EXTINT15;
config_extint_chan.gpio_pin_pull = EXTINT_PULL_UP;
config_extint_chan.detection_criteria = EXTINT_DETECT_BOTH;
config_extint_chan.gpio_pin = PIN_PA15A_EIC_EXTINT15;
config_extint_chan.gpio_pin_mux = MUX_PA15A_EIC_EXTINT15;
config_extint_chan.gpio_pin_pull = EXTINT_PULL_UP;
config_extint_chan.detection_criteria = EXTINT_DETECT_BOTH;
//! [setup_3]
//! [setup_4]
extint_chan_set_config(15, &config_extint_chan);
extint_chan_set_config(15, &config_extint_chan);
//! [setup_4]
}
void configure_extint_callbacks(void)
{
//! [setup_5]
extint_register_callback(extint_detection_callback, 15, EXTINT_CALLBACK_TYPE_DETECT);
extint_register_callback(extint_detection_callback, 15, EXTINT_CALLBACK_TYPE_DETECT);
//! [setup_5]
//! [setup_6]
extint_chan_enable_callback(15, EXTINT_CALLBACK_TYPE_DETECT);
extint_chan_enable_callback(15, EXTINT_CALLBACK_TYPE_DETECT);
//! [setup_6]
}
//! [setup_7]
void extint_detection_callback(void)
{
bool pin_state = port_pin_get_input_level(PIN_PA15);
port_pin_set_output_level(PIN_PB30, pin_state);
bool pin_state = port_pin_get_input_level(PIN_PA15);
port_pin_set_output_level(PIN_PB30, pin_state);
}
static struct rt_semaphore _rx_sem;
static rt_err_t _rx_ind(rt_device_t dev, rt_size_t size)
{
return rt_sem_release(&_rx_sem);
return rt_sem_release(&_rx_sem);
}
void rt_init_thread_entry(void* parameter)
{
rt_thread_t thread;
rt_device_t dev;
rt_thread_t thread;
rt_device_t dev;
rt_kprintf("SYSTEM running at %uhz\n", SystemCoreClock);
rt_kprintf("SYSTEM running at %uhz\n", SystemCoreClock);
LED_Init();
configure_extint_channel();
configure_extint_callbacks();
sleep_timer_init();
#if defined(TEST_UART_RX)
sleep_timer_init();
// sleep_timer_start(1500);
LED_Init();
configure_extint_channel();
configure_extint_callbacks();
while (1)
{
rt_kprintf("init thread running tick:%u\n", rt_tick_get());
rt_thread_delay(2*RT_TICK_PER_SECOND);
}
#if 0
dev = rt_device_find("uart3");
if (dev != RT_NULL)
{
rt_sem_init(&_rx_sem, "rxsem", 0, RT_IPC_FLAG_FIFO);
rt_device_set_rx_indicate(dev, _rx_ind);
rt_device_open(dev, RT_DEVICE_OFLAG_RDWR | RT_DEVICE_FLAG_INT_RX);
}
while (1)
{
rt_size_t r_size;
rt_uint8_t r_buf[1];
// rt_kprintf("SAMD2xJ18A hello thread\n");
// rt_thread_delay(RT_TICK_PER_SECOND);
rt_sem_take(&_rx_sem, RT_WAITING_FOREVER);
while ((r_size = rt_device_read(dev, 0, r_buf, 1)) > 0)
{
rt_device_write(dev, 0, r_buf, r_size);
if (r_buf[0] == '\r')
{
r_buf[0] = '\n';
rt_device_write(dev, 0, r_buf, r_size);
}
}
}
rt_kprintf("init thread running tick:%u\n", rt_tick_get());
rt_thread_delay(2*RT_TICK_PER_SECOND);
}
#else
dev = rt_device_find("uart3");
if (dev != RT_NULL)
{
rt_sem_init(&_rx_sem, "rxsem", 0, RT_IPC_FLAG_FIFO);
rt_device_set_rx_indicate(dev, _rx_ind);
rt_device_open(dev, RT_DEVICE_OFLAG_RDWR | RT_DEVICE_FLAG_INT_RX);
}
while (1)
{
rt_size_t r_size;
rt_uint8_t r_buf[1];
rt_sem_take(&_rx_sem, RT_WAITING_FOREVER);
while ((r_size = rt_device_read(dev, 0, r_buf, 1)) > 0)
{
rt_device_write(dev, 0, r_buf, r_size);
if (r_buf[0] == '\r')
{
r_buf[0] = '\n';
rt_device_write(dev, 0, r_buf, r_size);
}
}
}
#endif
}
int rt_application_init(void)
{
rt_thread_t tid;
rt_thread_t tid;
tid = rt_thread_create("init", rt_init_thread_entry, RT_NULL,
tid = rt_thread_create("init", rt_init_thread_entry, RT_NULL,
512, RT_THREAD_PRIORITY_MAX / 3, 20);
if (tid != RT_NULL)
rt_thread_startup(tid);
if (tid != RT_NULL)
rt_thread_startup(tid);
return 0;
return 0;
}