diff --git a/bsp/ls1cdev/drivers/drv_gpio.c b/bsp/ls1cdev/drivers/drv_gpio.c
index 5afdae5caa..2203db7775 100644
--- a/bsp/ls1cdev/drivers/drv_gpio.c
+++ b/bsp/ls1cdev/drivers/drv_gpio.c
@@ -73,8 +73,24 @@ rt_err_t ls1c_pin_attach_irq(struct rt_device *device, rt_int32_t pin,
 {
     unsigned int gpio = pin;
     char irq_name[10];
-
-    gpio_set_irq_type(gpio, mode);
+    rt_uint32_t type;
+    switch (mode)
+    {
+      case PIN_IRQ_MODE_RISING:
+      type=IRQ_TYPE_EDGE_RISING;
+      break;
+      case PIN_IRQ_MODE_FALLING:
+      type=IRQ_TYPE_EDGE_FALLING;
+      break;
+      case PIN_IRQ_MODE_HIGH_LEVEL:
+      type=IRQ_TYPE_LEVEL_HIGH;
+      break;
+      case PIN_IRQ_MODE_LOW_LEVEL:
+      type=IRQ_TYPE_LEVEL_LOW;
+      break;
+    }
+    gpio_set_irq_type(gpio, type);
+	
     rt_sprintf(irq_name, "PIN_%d", gpio);
     rt_hw_interrupt_install(LS1C_GPIO_TO_IRQ(gpio), (rt_isr_handler_t)hdr, args, irq_name);
 
diff --git a/bsp/ls1cdev/drivers/drv_spi.c b/bsp/ls1cdev/drivers/drv_spi.c
index 4b81d55d71..3cc2212850 100644
--- a/bsp/ls1cdev/drivers/drv_spi.c
+++ b/bsp/ls1cdev/drivers/drv_spi.c
@@ -25,13 +25,14 @@
 
 #include <rtthread.h>
 #include <drivers/spi.h>
+#include <rthw.h>
 #include "drv_spi.h"
+#include "ls1c_public.h"
+#include "spi_msd.h"
+#include "dfs_fs.h"
 #include "../libraries/ls1c_pin.h"
 
 #ifdef RT_USING_SPI
-
-//#define DEBUG
-
 #ifdef DEBUG
 #define DEBUG_PRINTF(...)           rt_kprintf(__VA_ARGS__)
 #else
@@ -265,20 +266,24 @@ int ls1c_hw_spi_init(void)
 #ifdef RT_USING_SPI0
     /* attach cs */
     {
-        static struct rt_spi_device spi_device0;
-        static struct rt_spi_device spi_device1;
-        static struct rt_spi_device spi_device2;
-        static struct ls1c_spi_cs  spi_cs0;
-        static struct ls1c_spi_cs  spi_cs1;
-        static struct ls1c_spi_cs  spi_cs2;
-
-        /* spi02: CS2  SD Card*/
-        spi_cs2.cs = LS1C_SPI_CS_2;
-        rt_spi_bus_attach_device(&spi_device2, "spi02", "spi0", (void *)&spi_cs2);
-        spi_cs1.cs = LS1C_SPI_CS_1;
-        rt_spi_bus_attach_device(&spi_device1, "spi01", "spi0", (void *)&spi_cs1);
-        spi_cs0.cs = LS1C_SPI_CS_0;
-        rt_spi_bus_attach_device(&spi_device0, "spi00", "spi0", (void *)&spi_cs0);
+     static struct rt_spi_device spi_device0;
+     static struct rt_spi_device spi_device1;
+     static struct rt_spi_device spi_device2;
+     static struct rt_spi_device spi_device3;
+     static struct ls1c_spi_cs  spi_cs0;
+     static struct ls1c_spi_cs  spi_cs1;
+     static struct ls1c_spi_cs  spi_cs2;
+     static struct ls1c_spi_cs  spi_cs3;
+     /* spi02: CS2  SD Card*/
+     spi_cs2.cs = LS1C_SPI_CS_2;
+     rt_spi_bus_attach_device(&spi_device2, "spi02", "spi0", (void *)&spi_cs2);
+     spi_cs1.cs = LS1C_SPI_CS_1;
+     rt_spi_bus_attach_device(&spi_device1, "spi01", "spi0", (void *)&spi_cs1);
+     spi_cs0.cs = LS1C_SPI_CS_0;
+     rt_spi_bus_attach_device(&spi_device0, "spi00", "spi0", (void *)&spi_cs0);
+     spi_cs3.cs = LS1C_SPI_CS_3;
+     rt_spi_bus_attach_device(&spi_device3, "spi03", "spi0", (void*)&spi_cs3);
+     msd_init("sd0", "spi02");
     }
 #endif
 #ifdef RT_USING_SPI1
@@ -296,5 +301,21 @@ int ls1c_hw_spi_init(void)
 
 INIT_BOARD_EXPORT(ls1c_hw_spi_init);
 
+static int board_sd_init(void)
+{
+    #if defined(RT_USING_DFS) && defined(RT_USING_DFS_ELMFAT)
+        /* mount sd card fat partition 1 as root directory */
+        if( dfs_mount("sd0", "/", "elm", 0, 0) == 0)
+        {
+            rt_kprintf("File System initialized!\n");
+        }
+        else
+        {
+            rt_kprintf("File System initialzation failed!\n");
+        }
+    #endif /* RT_USING_DFS && RT_USING_DFS_ELMFAT */
+}
+INIT_APP_EXPORT(board_sd_init);
+
 #endif
 
diff --git a/bsp/ls1cdev/drivers/net/synopGMAC.c b/bsp/ls1cdev/drivers/net/synopGMAC.c
index 8273b06c1c..da8c3c89fb 100644
--- a/bsp/ls1cdev/drivers/net/synopGMAC.c
+++ b/bsp/ls1cdev/drivers/net/synopGMAC.c
@@ -572,22 +572,16 @@ struct pbuf *rt_eth_rx(rt_device_t device)
     }
 
     /*Handle the Receive Descriptors*/
-    do
-    {
-        desc_index = synopGMAC_get_rx_qptr(gmacdev, &status, &dma_addr1, NULL, &data1, &dma_addr2, NULL, &data2);
-
-        if (desc_index >= 0 && data1 != 0)
+      desc_index = synopGMAC_get_rx_qptr(gmacdev, &status, &dma_addr1, NULL, &data1, &dma_addr2, NULL, &data2);
+      if (desc_index >= 0 && data1 != 0)
         {
-            DEBUG_MES("Received Data at Rx Descriptor %d for skb 0x%08x whose status is %08x\n", desc_index, dma_addr1, status);
-
-            if (synopGMAC_is_rx_desc_valid(status) || SYNOP_PHY_LOOPBACK)
+          DEBUG_MES("Received Data at Rx Descriptor %d for skb 0x%08x whose status is %08x\n", desc_index, dma_addr1, status);
+          if (synopGMAC_is_rx_desc_valid(status) || SYNOP_PHY_LOOPBACK)
             {
-                pbuf = pbuf_alloc(PBUF_LINK, MAX_ETHERNET_PAYLOAD, PBUF_RAM);
-                if (pbuf == 0) rt_kprintf("===error in pbuf_alloc\n");
-
-
                 dma_addr1 =  plat_dma_map_single(gmacdev, (void *)data1, RX_BUF_SIZE);
-                len =  synopGMAC_get_rx_desc_frame_length(status); //Not interested in Ethernet CRC bytes
+                len =  synopGMAC_get_rx_desc_frame_length(status)-4; //Not interested in Ethernet CRC bytes    
+                pbuf = pbuf_alloc(PBUF_LINK, len, PBUF_RAM);
+                if (pbuf == 0) rt_kprintf("===error in pbuf_alloc\n");
                 rt_memcpy(pbuf->payload, (char *)data1, len);
                 DEBUG_MES("==get pkg len: %d\n", len);
             }
@@ -600,19 +594,15 @@ struct pbuf *rt_eth_rx(rt_device_t device)
                 adapter->synopGMACNetStats.rx_frame_errors  += synopGMAC_is_frame_dribbling_errors(status);
                 adapter->synopGMACNetStats.rx_length_errors += synopGMAC_is_rx_frame_length_errors(status);
             }
-
             desc_index = synopGMAC_set_rx_qptr(gmacdev, dma_addr1, RX_BUF_SIZE, (u32)data1, 0, 0, 0);
-
             if (desc_index < 0)
             {
-    #if SYNOP_RX_DEBUG
+#if SYNOP_RX_DEBUG
                 rt_kprintf("Cannot set Rx Descriptor for data1 %08x\n", (u32)data1);
-    #endif
+#endif
                 plat_free_memory((void *)data1);
             }
-
         }
-    }while(desc_index >= 0);
     rt_sem_release(&sem_lock);
     DEBUG_MES("%s : before return \n", __FUNCTION__);
     return pbuf;
diff --git a/libcpu/mips/loongson_1c/ls1c.h b/libcpu/mips/loongson_1c/ls1c.h
index a203810c37..963f774cf7 100644
--- a/libcpu/mips/loongson_1c/ls1c.h
+++ b/libcpu/mips/loongson_1c/ls1c.h
@@ -18,36 +18,36 @@
 
 #include "../common/mipsregs.h"
 
-#define LS1C_ACPI_IRQ	0
-#define LS1C_HPET_IRQ	1
-//#define LS1C_UART0_IRQ	3  // linux中是3，v1.4版本的1c手册中是2，暂屏蔽，待确认
-#define LS1C_UART1_IRQ	4
-#define LS1C_UART2_IRQ	5
-#define LS1C_CAN0_IRQ	6
-#define LS1C_CAN1_IRQ	7
-#define LS1C_SPI0_IRQ	8
-#define LS1C_SPI1_IRQ	9
-#define LS1C_AC97_IRQ	10
-#define LS1C_MS_IRQ		11
-#define LS1C_KB_IRQ		12
-#define LS1C_DMA0_IRQ	13
-#define LS1C_DMA1_IRQ	14
-#define LS1C_DMA2_IRQ   15
-#define LS1C_NAND_IRQ	16
-#define LS1C_PWM0_IRQ	17
-#define LS1C_PWM1_IRQ	18
-#define LS1C_PWM2_IRQ	19
-#define LS1C_PWM3_IRQ	20
+#define LS1C_ACPI_IRQ    0
+#define LS1C_HPET_IRQ    1
+//#define LS1C_UART0_IRQ    3  // linux中是3，v1.4版本的1c手册中是2，暂屏蔽，待确认
+#define LS1C_UART1_IRQ   4
+#define LS1C_UART2_IRQ   5
+#define LS1C_CAN0_IRQ    6
+#define LS1C_CAN1_IRQ    7
+#define LS1C_SPI0_IRQ    8
+#define LS1C_SPI1_IRQ    9
+#define LS1C_AC97_IRQ    10
+#define LS1C_MS_IRQ      11
+#define LS1C_KB_IRQ      12
+#define LS1C_DMA0_IRQ    13
+#define LS1C_DMA1_IRQ    14
+#define LS1C_DMA2_IRQ    15
+#define LS1C_NAND_IRQ    16
+#define LS1C_PWM0_IRQ    17
+#define LS1C_PWM1_IRQ    18
+#define LS1C_PWM2_IRQ    19
+#define LS1C_PWM3_IRQ    20
 #define LS1C_RTC_INT0_IRQ  21
 #define LS1C_RTC_INT1_IRQ  22
 #define LS1C_RTC_INT2_IRQ  23
-#define LS1C_UART3_IRQ  29
-#define LS1C_ADC_IRQ    30
-#define LS1C_SDIO_IRQ   31
+#define LS1C_UART3_IRQ   29
+#define LS1C_ADC_IRQ     30
+#define LS1C_SDIO_IRQ    31
 
 
-#define LS1C_EHCI_IRQ	(32+0)
-#define LS1C_OHCI_IRQ	(32+1)
+#define LS1C_EHCI_IRQ   (32+0)
+#define LS1C_OHCI_IRQ   (32+1)
 #define LS1C_OTG_IRQ    (32+2)
 #define LS1C_MAC_IRQ    (32+3)
 #define LS1C_CAM_IRQ    (32+4)
@@ -64,7 +64,7 @@
 #define LS1C_I2C0_IRQ   (32+19)
 
 
-#define LS1C_GPIO_IRQ 64
+#define LS1C_GPIO_IRQ       64
 #define LS1C_GPIO_FIRST_IRQ 64
 #define LS1C_GPIO_IRQ_COUNT 96
 #define LS1C_GPIO_LAST_IRQ  (LS1C_GPIO_FIRST_IRQ + LS1C_GPIO_IRQ_COUNT-1)
@@ -84,72 +84,72 @@
 
 struct ls1c_intc_regs
 {
-	volatile unsigned int int_isr;
-	volatile unsigned int int_en;
-	volatile unsigned int int_set;
-	volatile unsigned int int_clr;		/* offset 0x10*/
-	volatile unsigned int int_pol;
-   	volatile unsigned int int_edge;		/* offset 0 */
+    volatile unsigned int int_isr;
+    volatile unsigned int int_en;
+    volatile unsigned int int_set;
+    volatile unsigned int int_clr;        /* offset 0x10*/
+    volatile unsigned int int_pol;
+    volatile unsigned int int_edge;        /* offset 0 */
 }; 
 
 struct ls1c_cop_global_regs
 {
-	volatile unsigned int control;
-	volatile unsigned int rd_inten;
-	volatile unsigned int wr_inten;
-	volatile unsigned int rd_intisr;		/* offset 0x10*/
-	volatile unsigned int wr_intisr;
-	unsigned int unused[11];
+    volatile unsigned int control;
+    volatile unsigned int rd_inten;
+    volatile unsigned int wr_inten;
+    volatile unsigned int rd_intisr;        /* offset 0x10*/
+    volatile unsigned int wr_intisr;
+    unsigned int unused[11];
 } ; 
 
 struct ls1c_cop_channel_regs
 {
-	volatile unsigned int rd_control;
-	volatile unsigned int rd_src;
-	volatile unsigned int rd_cnt;
-	volatile unsigned int rd_status;		/* offset 0x10*/
-	volatile unsigned int wr_control;
-	volatile unsigned int wr_src;
-	volatile unsigned int wr_cnt;
-	volatile unsigned int wr_status;		/* offset 0x10*/
+    volatile unsigned int rd_control;
+    volatile unsigned int rd_src;
+    volatile unsigned int rd_cnt;
+    volatile unsigned int rd_status;        /* offset 0x10*/
+    volatile unsigned int wr_control;
+    volatile unsigned int wr_src;
+    volatile unsigned int wr_cnt;
+    volatile unsigned int wr_status;        /* offset 0x10*/
 } ; 
 
 struct ls1c_cop_regs
 {
-	struct ls1c_cop_global_regs global;
-	struct ls1c_cop_channel_regs chan[8][2];
+    struct ls1c_cop_global_regs global;
+    struct ls1c_cop_channel_regs chan[8][2];
 } ;
 
-#define __REG8(addr)		*((volatile unsigned char *)(addr))
-#define __REG16(addr)		*((volatile unsigned short *)(addr))
-#define __REG32(addr)		*((volatile unsigned int *)(addr))
+#define __REG8(addr)        *((volatile unsigned char *)(addr))
+#define __REG16(addr)       *((volatile unsigned short *)(addr))
+#define __REG32(addr)       *((volatile unsigned int *)(addr))
 
-#define GMAC0_BASE			0xBFE10000
-#define GMAC0_DMA_BASE		0xBFE11000
-#define GMAC1_BASE			0xBFE20000
-#define GMAC1_DMA_BASE		0xBFE21000
-#define I2C0_BASE			0xBFE58000
-#define PWM0_BASE			0xBFE5C000
-#define PWM1_BASE			0xBFE5C010
-#define PWM2_BASE			0xBFE5C020
-#define PWM3_BASE			0xBFE5C030
-#define WDT_BASE			0xBFE5C060
-#define RTC_BASE			0xBFE64000
-#define I2C1_BASE			0xBFE68000
-#define I2C2_BASE			0xBFE70000
-#define AC97_BASE			0xBFE74000
-#define NAND_BASE			0xBFE78000
-#define SPI_BASE			0xBFE80000
-#define CAN1_BASE			0xBF004300
-#define CAN0_BASE			0xBF004400
+#define GMAC0_BASE            0xBFE10000
+#define GMAC0_DMA_BASE        0xBFE11000
+#define GMAC1_BASE            0xBFE20000
+#define GMAC1_DMA_BASE        0xBFE21000
+#define I2C0_BASE             0xBFE58000
+#define PWM0_BASE             0xBFE5C000
+#define PWM1_BASE             0xBFE5C010
+#define PWM2_BASE             0xBFE5C020
+#define PWM3_BASE             0xBFE5C030
+#define WDT_BASE              0xBFE5C060
+#define RTC_BASE              0xBFE64000
+#define I2C1_BASE             0xBFE68000
+#define I2C2_BASE             0xBFE70000
+#define AC97_BASE             0xBFE74000
+#define NAND_BASE             0xBFE78000
+#define SPI_BASE              0xBFE80000
+#define CAN1_BASE             0xBF004300
+#define CAN0_BASE             0xBF004400
 
 /* Watch Dog registers */
-#define WDT_EN				__REG32(WDT_BASE + 0x00)
-#define WDT_SET				__REG32(WDT_BASE + 0x04)
-#define WDT_TIMER			__REG32(WDT_BASE + 0x08)
+#define WDT_EN               __REG32(WDT_BASE + 0x00)
+#define WDT_SET              __REG32(WDT_BASE + 0x08)
+#define WDT_TIMER            __REG32(WDT_BASE + 0x04)
 
-#define PLL_FREQ 				__REG32(0xbfe78030)
-#define PLL_DIV_PARAM 			__REG32(0xbfe78034)
+#define PLL_FREQ             __REG32(0xbfe78030)
+#define PLL_DIV_PARAM        __REG32(0xbfe78034)
 
 #endif