diff --git a/bsp/imxrt/imxrt1170-nxp-evk/board/Kconfig b/bsp/imxrt/imxrt1170-nxp-evk/board/Kconfig index 8644fb5e1f..f5f7bb73a4 100644 --- a/bsp/imxrt/imxrt1170-nxp-evk/board/Kconfig +++ b/bsp/imxrt/imxrt1170-nxp-evk/board/Kconfig @@ -143,7 +143,7 @@ menu "Onboard Peripheral Drivers" config PHY_RESET_RTL8211F_PORT int "indicate port of reset" - default 11 + default 5 config PHY_RESET_RTL8211F_PIN int "indicate pin of reset" diff --git a/bsp/imxrt/imxrt1170-nxp-evk/board/board.c b/bsp/imxrt/imxrt1170-nxp-evk/board/board.c index 7b4c7bfd62..584637b8a0 100644 --- a/bsp/imxrt/imxrt1170-nxp-evk/board/board.c +++ b/bsp/imxrt/imxrt1170-nxp-evk/board/board.c @@ -7,6 +7,7 @@ * Date Author Notes * 2009-01-05 Bernard first implementation * 2022-08-15 xjy198903 add sdram pin config + * 2022-08-17 xjy198903 add rgmii pins */ #include @@ -446,163 +447,194 @@ void imxrt_SDcard_pins_init(void) #endif #ifdef BSP_USING_ETH void imxrt_eth_pins_init(void) { - CLOCK_EnableClock(kCLOCK_Iomuxc); /* LPCG on: LPCG is ON. */ - CLOCK_EnableClock(kCLOCK_Iomuxc_Lpsr); /* LPCG on: LPCG is ON. */ +#ifdef PHY_USING_RTL8211F + CLOCK_EnableClock(kCLOCK_Iomuxc); /* LPCG on: LPCG is ON. */ - IOMUXC_SetPinMux( - IOMUXC_GPIO_AD_12_GPIO9_IO11, /* GPIO_AD_12 is configured as GPIO9_IO11 */ - 0U); /* Software Input On Field: Input Path is determined by functionality */ - IOMUXC_SetPinMux( - IOMUXC_GPIO_AD_24_LPUART1_TXD, /* GPIO_AD_24 is configured as LPUART1_TXD */ - 0U); /* Software Input On Field: Input Path is determined by functionality */ - IOMUXC_SetPinMux( - IOMUXC_GPIO_AD_25_LPUART1_RXD, /* GPIO_AD_25 is configured as LPUART1_RXD */ - 1U); /* Software Input On Field: Force input path of pad GPIO_AD_25 */ - IOMUXC_SetPinMux( - IOMUXC_GPIO_AD_32_ENET_MDC, /* GPIO_AD_32 is configured as ENET_MDC */ - 0U); /* Software Input On Field: Input Path is determined by functionality */ - IOMUXC_SetPinMux( - IOMUXC_GPIO_AD_33_ENET_MDIO, /* GPIO_AD_33 is configured as ENET_MDIO */ - 0U); /* Software Input On Field: Input Path is determined by functionality */ - IOMUXC_SetPinMux( - IOMUXC_GPIO_DISP_B2_02_ENET_TX_DATA00, /* GPIO_DISP_B2_02 is configured as ENET_TX_DATA00 */ - 0U); /* Software Input On Field: Input Path is determined by functionality */ - IOMUXC_SetPinMux( - IOMUXC_GPIO_DISP_B2_03_ENET_TX_DATA01, /* GPIO_DISP_B2_03 is configured as ENET_TX_DATA01 */ - 0U); /* Software Input On Field: Input Path is determined by functionality */ - IOMUXC_SetPinMux( - IOMUXC_GPIO_DISP_B2_04_ENET_TX_EN, /* GPIO_DISP_B2_04 is configured as ENET_TX_EN */ - 0U); /* Software Input On Field: Input Path is determined by functionality */ - IOMUXC_SetPinMux( - IOMUXC_GPIO_DISP_B2_05_ENET_REF_CLK, /* GPIO_DISP_B2_05 is configured as ENET_REF_CLK */ - 1U); /* Software Input On Field: Force input path of pad GPIO_DISP_B2_05 */ - IOMUXC_SetPinMux( - IOMUXC_GPIO_DISP_B2_06_ENET_RX_DATA00, /* GPIO_DISP_B2_06 is configured as ENET_RX_DATA00 */ - 1U); /* Software Input On Field: Force input path of pad GPIO_DISP_B2_06 */ - IOMUXC_SetPinMux( - IOMUXC_GPIO_DISP_B2_07_ENET_RX_DATA01, /* GPIO_DISP_B2_07 is configured as ENET_RX_DATA01 */ - 1U); /* Software Input On Field: Force input path of pad GPIO_DISP_B2_07 */ - IOMUXC_SetPinMux( - IOMUXC_GPIO_DISP_B2_08_ENET_RX_EN, /* GPIO_DISP_B2_08 is configured as ENET_RX_EN */ - 0U); /* Software Input On Field: Input Path is determined by functionality */ - IOMUXC_SetPinMux( - IOMUXC_GPIO_DISP_B2_09_ENET_RX_ER, /* GPIO_DISP_B2_09 is configured as ENET_RX_ER */ - 0U); /* Software Input On Field: Input Path is determined by functionality */ - IOMUXC_GPR->GPR4 = ((IOMUXC_GPR->GPR4 & - (~(IOMUXC_GPR_GPR4_ENET_REF_CLK_DIR_MASK))) /* Mask bits to zero which are setting */ - | IOMUXC_GPR_GPR4_ENET_REF_CLK_DIR(0x01U) /* ENET_REF_CLK direction control: 0x01U */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B1_00_ENET_1G_RX_EN, /* GPIO_DISP_B1_00 is configured as ENET_1G_RX_EN */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B1_01_ENET_1G_RX_CLK, /* GPIO_DISP_B1_01 is configured as ENET_1G_RX_CLK */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B1_02_ENET_1G_RX_DATA00, /* GPIO_DISP_B1_02 is configured as ENET_1G_RX_DATA00 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B1_03_ENET_1G_RX_DATA01, /* GPIO_DISP_B1_03 is configured as ENET_1G_RX_DATA01 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B1_04_ENET_1G_RX_DATA02, /* GPIO_DISP_B1_04 is configured as ENET_1G_RX_DATA02 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B1_05_ENET_1G_RX_DATA03, /* GPIO_DISP_B1_05 is configured as ENET_1G_RX_DATA03 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B1_06_ENET_1G_TX_DATA03, /* GPIO_DISP_B1_06 is configured as ENET_1G_TX_DATA03 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B1_07_ENET_1G_TX_DATA02, /* GPIO_DISP_B1_07 is configured as ENET_1G_TX_DATA02 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B1_08_ENET_1G_TX_DATA01, /* GPIO_DISP_B1_08 is configured as ENET_1G_TX_DATA01 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B1_09_ENET_1G_TX_DATA00, /* GPIO_DISP_B1_09 is configured as ENET_1G_TX_DATA00 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B1_10_ENET_1G_TX_EN, /* GPIO_DISP_B1_10 is configured as ENET_1G_TX_EN */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B1_11_ENET_1G_TX_CLK_IO, /* GPIO_DISP_B1_11 is configured as ENET_1G_TX_CLK_IO */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B2_12_GPIO_MUX5_IO13, /* GPIO_DISP_B2_12 is configured as GPIO_MUX5_IO13 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B2_13_GPIO_MUX5_IO14, /* GPIO_DISP_B2_13 is configured as GPIO_MUX5_IO14 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_B2_19_ENET_1G_MDC, /* GPIO_EMC_B2_19 is configured as ENET_1G_MDC */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_EMC_B2_20_ENET_1G_MDIO, /* GPIO_EMC_B2_20 is configured as ENET_1G_MDIO */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ +#else + CLOCK_EnableClock(kCLOCK_Iomuxc); /* LPCG on: LPCG is ON. */ + CLOCK_EnableClock(kCLOCK_Iomuxc_Lpsr); /* LPCG on: LPCG is ON. */ + + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_12_GPIO9_IO11, /* GPIO_AD_12 is configured as GPIO9_IO11 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_32_ENET_MDC, /* GPIO_AD_32 is configured as ENET_MDC */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_33_ENET_MDIO, /* GPIO_AD_33 is configured as ENET_MDIO */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B2_02_ENET_TX_DATA00, /* GPIO_DISP_B2_02 is configured as ENET_TX_DATA00 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B2_03_ENET_TX_DATA01, /* GPIO_DISP_B2_03 is configured as ENET_TX_DATA01 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B2_04_ENET_TX_EN, /* GPIO_DISP_B2_04 is configured as ENET_TX_EN */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B2_05_ENET_REF_CLK, /* GPIO_DISP_B2_05 is configured as ENET_REF_CLK */ + 1U); /* Software Input On Field: Force input path of pad GPIO_DISP_B2_05 */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B2_06_ENET_RX_DATA00, /* GPIO_DISP_B2_06 is configured as ENET_RX_DATA00 */ + 1U); /* Software Input On Field: Force input path of pad GPIO_DISP_B2_06 */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B2_07_ENET_RX_DATA01, /* GPIO_DISP_B2_07 is configured as ENET_RX_DATA01 */ + 1U); /* Software Input On Field: Force input path of pad GPIO_DISP_B2_07 */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B2_08_ENET_RX_EN, /* GPIO_DISP_B2_08 is configured as ENET_RX_EN */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_DISP_B2_09_ENET_RX_ER, /* GPIO_DISP_B2_09 is configured as ENET_RX_ER */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_GPR->GPR4 = ((IOMUXC_GPR->GPR4 & + (~(IOMUXC_GPR_GPR4_ENET_REF_CLK_DIR_MASK))) /* Mask bits to zero which are setting */ + | IOMUXC_GPR_GPR4_ENET_REF_CLK_DIR(0x01U) /* ENET_REF_CLK direction control: 0x01U */ ); - IOMUXC_SetPinMux( - IOMUXC_GPIO_LPSR_12_GPIO12_IO12, /* GPIO_LPSR_12 is configured as GPIO12_IO12 */ - 0U); /* Software Input On Field: Input Path is determined by functionality */ - IOMUXC_SetPinConfig( - IOMUXC_GPIO_AD_12_GPIO9_IO11, /* GPIO_AD_12 PAD functional properties : */ - 0x06U); /* Slew Rate Field: Slow Slew Rate - Drive Strength Field: high drive strength - Pull / Keep Select Field: Pull Enable - Pull Up / Down Config. Field: Weak pull down - Open Drain Field: Disabled - Domain write protection: Both cores are allowed - Domain write protection lock: Neither of DWP bits is locked */ - IOMUXC_SetPinConfig( - IOMUXC_GPIO_AD_24_LPUART1_TXD, /* GPIO_AD_24 PAD functional properties : */ - 0x06U); /* Slew Rate Field: Slow Slew Rate - Drive Strength Field: high drive strength - Pull / Keep Select Field: Pull Enable - Pull Up / Down Config. Field: Weak pull down - Open Drain Field: Disabled - Domain write protection: Both cores are allowed - Domain write protection lock: Neither of DWP bits is locked */ - IOMUXC_SetPinConfig( - IOMUXC_GPIO_AD_25_LPUART1_RXD, /* GPIO_AD_25 PAD functional properties : */ - 0x06U); /* Slew Rate Field: Slow Slew Rate - Drive Strength Field: high drive strength - Pull / Keep Select Field: Pull Enable - Pull Up / Down Config. Field: Weak pull down - Open Drain Field: Disabled - Domain write protection: Both cores are allowed - Domain write protection lock: Neither of DWP bits is locked */ - IOMUXC_SetPinConfig( - IOMUXC_GPIO_DISP_B2_02_ENET_TX_DATA00, /* GPIO_DISP_B2_02 PAD functional properties : */ - 0x02U); /* Slew Rate Field: Slow Slew Rate - Drive Strength Field: high drive strength - Pull / Keep Select Field: Pull Disable, Highz - Pull Up / Down Config. Field: Weak pull down - Open Drain Field: Disabled - Domain write protection: Both cores are allowed - Domain write protection lock: Neither of DWP bits is locked */ - IOMUXC_SetPinConfig( - IOMUXC_GPIO_DISP_B2_03_ENET_TX_DATA01, /* GPIO_DISP_B2_03 PAD functional properties : */ - 0x02U); /* Slew Rate Field: Slow Slew Rate - Drive Strength Field: high drive strength - Pull / Keep Select Field: Pull Disable, Highz - Pull Up / Down Config. Field: Weak pull down - Open Drain Field: Disabled - Domain write protection: Both cores are allowed - Domain write protection lock: Neither of DWP bits is locked */ - IOMUXC_SetPinConfig( - IOMUXC_GPIO_DISP_B2_04_ENET_TX_EN, /* GPIO_DISP_B2_04 PAD functional properties : */ - 0x02U); /* Slew Rate Field: Slow Slew Rate - Drive Strength Field: high drive strength - Pull / Keep Select Field: Pull Disable, Highz - Pull Up / Down Config. Field: Weak pull down - Open Drain Field: Disabled - Domain write protection: Both cores are allowed - Domain write protection lock: Neither of DWP bits is locked */ - IOMUXC_SetPinConfig( - IOMUXC_GPIO_DISP_B2_05_ENET_REF_CLK, /* GPIO_DISP_B2_05 PAD functional properties : */ - 0x03U); /* Slew Rate Field: Fast Slew Rate - Drive Strength Field: high drive strength - Pull / Keep Select Field: Pull Disable, Highz - Pull Up / Down Config. Field: Weak pull down - Open Drain Field: Disabled - Domain write protection: Both cores are allowed - Domain write protection lock: Neither of DWP bits is locked */ - IOMUXC_SetPinConfig( - IOMUXC_GPIO_DISP_B2_06_ENET_RX_DATA00, /* GPIO_DISP_B2_06 PAD functional properties : */ - 0x06U); /* Slew Rate Field: Slow Slew Rate - Drive Strength Field: high drive strength - Pull / Keep Select Field: Pull Enable - Pull Up / Down Config. Field: Weak pull down - Open Drain Field: Disabled - Domain write protection: Both cores are allowed - Domain write protection lock: Neither of DWP bits is locked */ - IOMUXC_SetPinConfig( - IOMUXC_GPIO_DISP_B2_07_ENET_RX_DATA01, /* GPIO_DISP_B2_07 PAD functional properties : */ - 0x06U); /* Slew Rate Field: Slow Slew Rate - Drive Strength Field: high drive strength - Pull / Keep Select Field: Pull Enable - Pull Up / Down Config. Field: Weak pull down - Open Drain Field: Disabled - Domain write protection: Both cores are allowed - Domain write protection lock: Neither of DWP bits is locked */ - IOMUXC_SetPinConfig( - IOMUXC_GPIO_DISP_B2_08_ENET_RX_EN, /* GPIO_DISP_B2_08 PAD functional properties : */ - 0x06U); /* Slew Rate Field: Slow Slew Rate - Drive Strength Field: high drive strength - Pull / Keep Select Field: Pull Enable - Pull Up / Down Config. Field: Weak pull down - Open Drain Field: Disabled - Domain write protection: Both cores are allowed - Domain write protection lock: Neither of DWP bits is locked */ - IOMUXC_SetPinConfig( - IOMUXC_GPIO_DISP_B2_09_ENET_RX_ER, /* GPIO_DISP_B2_09 PAD functional properties : */ - 0x06U); /* Slew Rate Field: Slow Slew Rate - Drive Strength Field: high drive strength - Pull / Keep Select Field: Pull Enable - Pull Up / Down Config. Field: Weak pull down - Open Drain Field: Disabled - Domain write protection: Both cores are allowed - Domain write protection lock: Neither of DWP bits is locked */ - IOMUXC_SetPinConfig( - IOMUXC_GPIO_LPSR_12_GPIO12_IO12, /* GPIO_LPSR_12 PAD functional properties : */ - 0x0EU); /* Slew Rate Field: Slow Slew Rate - Drive Strength Field: high driver - Pull / Keep Select Field: Pull Enable - Pull Up / Down Config. Field: Weak pull up - Open Drain LPSR Field: Disabled - Domain write protection: Both cores are allowed - Domain write protection lock: Neither of DWP bits is locked */ + IOMUXC_SetPinMux( + IOMUXC_GPIO_LPSR_12_GPIO_MUX6_IO12, /* GPIO_LPSR_12 is configured as GPIO12_IO12 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinConfig( + IOMUXC_GPIO_AD_12_GPIO9_IO11, /* GPIO_AD_12 PAD functional properties : */ + 0x06U); /* Slew Rate Field: Slow Slew Rate + Drive Strength Field: high drive strength + Pull / Keep Select Field: Pull Enable + Pull Up / Down Config. Field: Weak pull down + Open Drain Field: Disabled + Domain write protection: Both cores are allowed + Domain write protection lock: Neither of DWP bits is locked */ + + IOMUXC_SetPinConfig( + IOMUXC_GPIO_DISP_B2_02_ENET_TX_DATA00, /* GPIO_DISP_B2_02 PAD functional properties : */ + 0x02U); /* Slew Rate Field: Slow Slew Rate + Drive Strength Field: high drive strength + Pull / Keep Select Field: Pull Disable, Highz + Pull Up / Down Config. Field: Weak pull down + Open Drain Field: Disabled + Domain write protection: Both cores are allowed + Domain write protection lock: Neither of DWP bits is locked */ + IOMUXC_SetPinConfig( + IOMUXC_GPIO_DISP_B2_03_ENET_TX_DATA01, /* GPIO_DISP_B2_03 PAD functional properties : */ + 0x02U); /* Slew Rate Field: Slow Slew Rate + Drive Strength Field: high drive strength + Pull / Keep Select Field: Pull Disable, Highz + Pull Up / Down Config. Field: Weak pull down + Open Drain Field: Disabled + Domain write protection: Both cores are allowed + Domain write protection lock: Neither of DWP bits is locked */ + IOMUXC_SetPinConfig( + IOMUXC_GPIO_DISP_B2_04_ENET_TX_EN, /* GPIO_DISP_B2_04 PAD functional properties : */ + 0x02U); /* Slew Rate Field: Slow Slew Rate + Drive Strength Field: high drive strength + Pull / Keep Select Field: Pull Disable, Highz + Pull Up / Down Config. Field: Weak pull down + Open Drain Field: Disabled + Domain write protection: Both cores are allowed + Domain write protection lock: Neither of DWP bits is locked */ + IOMUXC_SetPinConfig( + IOMUXC_GPIO_DISP_B2_05_ENET_REF_CLK, /* GPIO_DISP_B2_05 PAD functional properties : */ + 0x03U); /* Slew Rate Field: Fast Slew Rate + Drive Strength Field: high drive strength + Pull / Keep Select Field: Pull Disable, Highz + Pull Up / Down Config. Field: Weak pull down + Open Drain Field: Disabled + Domain write protection: Both cores are allowed + Domain write protection lock: Neither of DWP bits is locked */ + IOMUXC_SetPinConfig( + IOMUXC_GPIO_DISP_B2_06_ENET_RX_DATA00, /* GPIO_DISP_B2_06 PAD functional properties : */ + 0x06U); /* Slew Rate Field: Slow Slew Rate + Drive Strength Field: high drive strength + Pull / Keep Select Field: Pull Enable + Pull Up / Down Config. Field: Weak pull down + Open Drain Field: Disabled + Domain write protection: Both cores are allowed + Domain write protection lock: Neither of DWP bits is locked */ + IOMUXC_SetPinConfig( + IOMUXC_GPIO_DISP_B2_07_ENET_RX_DATA01, /* GPIO_DISP_B2_07 PAD functional properties : */ + 0x06U); /* Slew Rate Field: Slow Slew Rate + Drive Strength Field: high drive strength + Pull / Keep Select Field: Pull Enable + Pull Up / Down Config. Field: Weak pull down + Open Drain Field: Disabled + Domain write protection: Both cores are allowed + Domain write protection lock: Neither of DWP bits is locked */ + IOMUXC_SetPinConfig( + IOMUXC_GPIO_DISP_B2_08_ENET_RX_EN, /* GPIO_DISP_B2_08 PAD functional properties : */ + 0x06U); /* Slew Rate Field: Slow Slew Rate + Drive Strength Field: high drive strength + Pull / Keep Select Field: Pull Enable + Pull Up / Down Config. Field: Weak pull down + Open Drain Field: Disabled + Domain write protection: Both cores are allowed + Domain write protection lock: Neither of DWP bits is locked */ + IOMUXC_SetPinConfig( + IOMUXC_GPIO_DISP_B2_09_ENET_RX_ER, /* GPIO_DISP_B2_09 PAD functional properties : */ + 0x06U); /* Slew Rate Field: Slow Slew Rate + Drive Strength Field: high drive strength + Pull / Keep Select Field: Pull Enable + Pull Up / Down Config. Field: Weak pull down + Open Drain Field: Disabled + Domain write protection: Both cores are allowed + Domain write protection lock: Neither of DWP bits is locked */ + IOMUXC_SetPinConfig( + IOMUXC_GPIO_LPSR_12_GPIO_MUX6_IO12, /* GPIO_LPSR_12 PAD functional properties : */ + 0x0EU); /* Slew Rate Field: Slow Slew Rate + Drive Strength Field: high driver + Pull / Keep Select Field: Pull Enable + Pull Up / Down Config. Field: Weak pull up + Open Drain LPSR Field: Disabled + Domain write protection: Both cores are allowed + Domain write protection lock: Neither of DWP bits is locked */ + +#endif } #endif diff --git a/bsp/imxrt/libraries/drivers/drv_gpio.c b/bsp/imxrt/libraries/drivers/drv_gpio.c index 1fd66c8d9a..ecc6ed9b3b 100644 --- a/bsp/imxrt/libraries/drivers/drv_gpio.c +++ b/bsp/imxrt/libraries/drivers/drv_gpio.c @@ -28,7 +28,12 @@ #endif #define __IMXRT_HDR_DEFAULT {-1, 0, RT_NULL, RT_NULL} -#define PIN_INVALID_CHECK(PORT_INDEX,PIN_NUM) (PORT_INDEX > 4) || ((mask_tab[PORT_INDEX].valid_mask & (1 << PIN_NUM)) == 0) + +#ifdef SOC_IMXRT1170_SERIES +#define PIN_INVALID_CHECK(PORT_INDEX, PIN_NUM) (PORT_INDEX > 7) || ((mask_tab[PORT_INDEX].valid_mask & (1 << PIN_NUM)) == 0) +#else +#define PIN_INVALID_CHECK(PORT_INDEX, PIN_NUM) (PORT_INDEX > 4) || ((mask_tab[PORT_INDEX].valid_mask & (1 << PIN_NUM)) == 0) +#endif #if defined(SOC_IMXRT1015_SERIES) #define MUX_BASE 0x401f8024