[bsp][bluetrum] only keep uart driver open

This commit is contained in:
greedyhao 2021-01-26 16:20:25 +08:00
parent 0a5f6e8cdd
commit 76dbf1936d
4 changed files with 74 additions and 33 deletions

View File

@ -114,8 +114,16 @@ CONFIG_DFS_FILESYSTEM_TYPES_MAX=2
CONFIG_DFS_FD_MAX=16
# CONFIG_RT_USING_DFS_MNTTABLE is not set
# CONFIG_RT_USING_DFS_ELMFAT is not set
# CONFIG_RT_DFS_ELM_USE_LFN_0 is not set
# CONFIG_RT_DFS_ELM_USE_LFN_1 is not set
# CONFIG_RT_DFS_ELM_USE_LFN_2 is not set
# CONFIG_RT_DFS_ELM_USE_LFN_3 is not set
# CONFIG_RT_DFS_ELM_LFN_UNICODE_0 is not set
# CONFIG_RT_DFS_ELM_LFN_UNICODE_1 is not set
# CONFIG_RT_DFS_ELM_LFN_UNICODE_2 is not set
# CONFIG_RT_DFS_ELM_LFN_UNICODE_3 is not set
# CONFIG_RT_USING_DFS_DEVFS is not set
CONFIG_RT_USING_DFS_ROMFS=y
# CONFIG_RT_USING_DFS_ROMFS is not set
# CONFIG_RT_USING_DFS_RAMFS is not set
# CONFIG_RT_USING_DFS_UFFS is not set
# CONFIG_RT_USING_DFS_JFFS2 is not set
@ -145,10 +153,7 @@ CONFIG_RT_USING_PIN=y
# CONFIG_RT_USING_SDIO is not set
# CONFIG_RT_USING_SPI is not set
# CONFIG_RT_USING_WDT is not set
CONFIG_RT_USING_AUDIO=y
CONFIG_RT_AUDIO_REPLAY_MP_BLOCK_SIZE=1024
CONFIG_RT_AUDIO_REPLAY_MP_BLOCK_COUNT=2
CONFIG_RT_AUDIO_RECORD_PIPE_SIZE=512
# CONFIG_RT_USING_AUDIO is not set
# CONFIG_RT_USING_SENSOR is not set
# CONFIG_RT_USING_TOUCH is not set
# CONFIG_RT_USING_HWCRYPTO is not set
@ -328,6 +333,8 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_PKG_USING_RDB is not set
# CONFIG_PKG_USING_QRCODE is not set
# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
# CONFIG_PKG_USING_ULOG_FILE is not set
# CONFIG_PKG_USING_LOGMGR is not set
# CONFIG_PKG_USING_ADBD is not set
# CONFIG_PKG_USING_COREMARK is not set
# CONFIG_PKG_USING_DHRYSTONE is not set
@ -343,6 +350,8 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_PKG_USING_CPU_USAGE is not set
# CONFIG_PKG_USING_GBK2UTF8 is not set
# CONFIG_PKG_USING_VCONSOLE is not set
# CONFIG_PKG_USING_KDB is not set
# CONFIG_PKG_USING_WAMR is not set
#
# system packages
@ -382,6 +391,10 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_PKG_USING_PPOOL is not set
# CONFIG_PKG_USING_OPENAMP is not set
# CONFIG_PKG_USING_RT_PRINTF is not set
# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set
# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set
# CONFIG_PKG_USING_QFPLIB_M3 is not set
#
# peripheral libraries and drivers
@ -390,6 +403,7 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_PKG_USING_REALTEK_AMEBA is not set
# CONFIG_PKG_USING_SHT2X is not set
# CONFIG_PKG_USING_SHT3X is not set
# CONFIG_PKG_USING_AS7341 is not set
# CONFIG_PKG_USING_STM32_SDIO is not set
# CONFIG_PKG_USING_ICM20608 is not set
# CONFIG_PKG_USING_U8G2 is not set
@ -442,6 +456,7 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_PKG_USING_NES is not set
# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set
# CONFIG_PKG_USING_VDEVICE is not set
# CONFIG_PKG_USING_SGM706 is not set
#
# miscellaneous packages
@ -491,6 +506,7 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_PKG_USING_TETRIS is not set
# CONFIG_PKG_USING_LWGPS is not set
# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
# CONFIG_PKG_USING_STATE_MACHINE is not set
#
# Hardware Drivers Config
@ -500,8 +516,7 @@ CONFIG_RT_USING_LIBC=y
# Onboard Peripheral Drivers
#
CONFIG_BSP_USING_USB_TO_USART=y
CONFIG_BSP_USING_AUDIO=y
CONFIG_BSP_USING_AUDIO_PLAY=y
# CONFIG_BSP_USING_AUDIO is not set
# CONFIG_BSP_USING_SDCARD is not set
#
@ -509,10 +524,9 @@ CONFIG_BSP_USING_AUDIO_PLAY=y
#
CONFIG_BSP_USING_UART0=y
# CONFIG_BSP_USING_SDIO is not set
#
# On-chip Peripheral Drivers
#
# CONFIG_BSP_USING_I2C1 is not set
# CONFIG_BSP_USING_WDT is not set
# CONFIG_BSP_USING_TIM is not set
#
# Board extended module Drivers

View File

@ -47,6 +47,55 @@ menu "On-chip Peripheral Drivers"
select RT_USING_DFS_ELMFAT
default n
menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)"
default n
select RT_USING_I2C
select RT_USING_I2C_BITOPS
select RT_USING_PIN
if BSP_USING_I2C1
comment "Notice: PE3 --> 16; PE2 --> 15"
config BSP_I2C1_SCL_PIN
int "I2C1 scl pin number"
range 1 27
default 16
config BSP_I2C1_SDA_PIN
int "I2C1 sda pin number"
range 1 27
default 15
endif
config BSP_USING_WDT
bool "Enable Watchdog Timer"
select RT_USING_WDT
default n
menuconfig BSP_USING_TIM
bool "Enable timer"
default n
select RT_USING_HWTIMER
if BSP_USING_TIM
config BSP_USING_TIM1
bool "Enable TIM1"
default n
config BSP_USING_TIM2
bool "Enable TIM2"
default n
config BSP_USING_TIM3
bool "Enable TIM3"
default n
config BSP_USING_TIM4
bool "Enable TIM4"
default n
config BSP_USING_TIM5
bool "Enable TIM5"
default n
endif
endmenu
menu "Board extended module Drivers"

View File

@ -77,7 +77,6 @@
#define DFS_FILESYSTEMS_MAX 2
#define DFS_FILESYSTEM_TYPES_MAX 2
#define DFS_FD_MAX 16
#define RT_USING_DFS_ROMFS
/* Device Drivers */
@ -86,10 +85,6 @@
#define RT_USING_SERIAL
#define RT_SERIAL_RB_BUFSZ 64
#define RT_USING_PIN
#define RT_USING_AUDIO
#define RT_AUDIO_REPLAY_MP_BLOCK_SIZE 1024
#define RT_AUDIO_REPLAY_MP_BLOCK_COUNT 2
#define RT_AUDIO_RECORD_PIPE_SIZE 512
/* Using USB */
@ -169,15 +164,11 @@
/* Onboard Peripheral Drivers */
#define BSP_USING_USB_TO_USART
#define BSP_USING_AUDIO
#define BSP_USING_AUDIO_PLAY
/* On-chip Peripheral Drivers */
#define BSP_USING_UART0
/* On-chip Peripheral Drivers */
/* Board extended module Drivers */
#define BOARD_BLUETRUM_EVB

View File

@ -18,19 +18,6 @@
#ifdef RT_USING_HWTIMER
#define TIM_ENABLE BIT(0)
#define TIM_CAPTURE_ENABLE
#define TIM_INCREASE_CLOCK_SELECT
#define TIM_CAPTURE_EDGE_SELECT
#define TIM_INCREASE_SOURCE_SELECT
#define TIM_OVERFLOW_INTERRUPT_ENABLE
#define TIM_CAPTURE_INTERRUPT_ENABLE
#define TIM_PWM0_ENABLE
#define TIM_PWM1_ENABLE
#define TIM_PWM2_ENABLE
#define TIM_OVERFLOW_PEND
#define TIM_CAPTURE_PEND
enum
{
#ifdef BSP_USING_TIM1