【English readme】[stm32f767 nucleo] add English version readme
This commit is contained in:
mysterywolf
parent
3634621815
commit
75f0698bd3
|
|
@ -1,110 +1,95 @@
|
|||
# STM32F767 NUCLEO-F767ZI开发板 BSP 说明
|
||||
## 简介
|
||||
# STM32F767-Nucleo BSP Introduction
|
||||
|
||||
本文档为 NUCLEO-F767ZI 开发板的 BSP (板级支持包) 说明。
|
||||
[中文](README_zh.md)
|
||||
|
||||
主要内容如下：
|
||||
## MCU: STM32F767ZI @216MHz, 2MB FLASH, 512KB RAM
|
||||
|
||||
- 开发板资源介绍
|
||||
- BSP 快速上手
|
||||
- 进阶使用方法
|
||||
The STM32F765xx, STM32F767xx, STM32F768Ax and STM32F769xx devices are based on the high-performance Arm® Cortex®-M7 32-bit RISC core operating at up to 216 MHz frequency. The Cortex®-M7 core features a floating point unit (FPU) which supports Arm® double-precision and single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances the application security.
|
||||
|
||||
通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。
|
||||
The STM32F765xx, STM32F767xx, STM32F768Ax and STM32F769xx devices incorporate high-speed embedded memories with a Flash memory up to 2 Mbytes, 512 Kbytes of SRAM (including 128 Kbytes of Data TCM RAM for critical real-time data), 16 Kbytes of instruction TCM RAM (for critical real-time routines), 4 Kbytes of backup SRAM available in the lowest power modes, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses, a 32-bit multi-AHB bus matrix and a multi layer AXI interconnect supporting internal and external memories access.
|
||||
All the devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers, a true random number generator (RNG). They also feature standard and advanced communication interfaces.
|
||||
Advanced peripherals include two SDMMC interfaces, a flexible memory control (FMC) interface, a Quad-SPI Flash memory interface, a camera interface for CMOS sensors.
|
||||
The STM32F765xx, STM32F767xx, STM32F768Ax and STM32F769xx devices operate in the –40 to +105 °C temperature range from a 1.7 to 3.6 V power supply. Dedicated supply inputs for USB (OTG_FS and OTG_HS) and SDMMC2 (clock, command and 4-bit data) are available on all the packages except LQFP100 for a greater power supply choice.
|
||||
The supply voltage can drop to 1.7 V with the use of an external power supply supervisor. A comprehensive set of power-saving mode allows the design of low-power applications.
|
||||
The STM32F765xx, STM32F767xx, STM32F768Ax and STM32F769xx devices offer devices in 11 packages ranging from 100 pins to 216 pins. The set of included peripherals changes with the device chosen.
|
||||
These features make the STM32F765xx, STM32F767xx, STM32F768Ax and STM32F769xx microcontrollers suitable for a wide range of applications.
|
||||
|
||||
## 开发板介绍
|
||||
#### KEY FEATURES
|
||||
|
||||
NUCLEO-F767ZI 是st推出的一款基于 ARM Cortex-M7 内核的开发板，最高主频为 216Mhz，该开发板具有丰富的板载资源，可以充分发挥 STM32F767 的芯片性能。
|
||||
- Core: Arm® 32-bit Cortex®-M7 CPU with DPFPU, ART Accelerator™ and L1-cache: 16 Kbytes I/D cache, allowing 0-wait state execution from embedded Flash and external memories, up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions.
|
||||
- Memories
|
||||
- Up to 2 Mbytes of Flash memory organized into two banks allowing read-while-write
|
||||
- SRAM: 512 Kbytes (including 128 Kbytes of data TCM RAM for critical real-time data) + 16 Kbytes of instruction TCM RAM (for critical real-time routines) + 4 Kbytes of backup SRAM
|
||||
- Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND memories
|
||||
- Dual mode Quad-SPI
|
||||
- Graphics
|
||||
- Chrom-ART Accelerator™ (DMA2D), graphical hardware accelerator enabling enhanced graphical user interface
|
||||
- Hardware JPEG codec
|
||||
- LCD-TFT controller supporting up to XGA resolution
|
||||
- MIPI® DSI host controller supporting up to 720p 30 Hz resolution
|
||||
- Clock, reset and supply management
|
||||
- 1.7 V to 3.6 V application supply and I/Os
|
||||
- POR, PDR, PVD and BOR
|
||||
- Dedicated USB power
|
||||
- 4-to-26 MHz crystal oscillator
|
||||
- Internal 16 MHz factory-trimmed RC (1% accuracy)
|
||||
- 32 kHz oscillator for RTC with calibration
|
||||
- Internal 32 kHz RC with calibration
|
||||
- Low-power
|
||||
- Sleep, Stop and Standby modes
|
||||
- VBAT supply for RTC, 32×32 bit backup registers + 4 Kbytes backup SRAM
|
||||
- 3×12-bit, 2.4 MSPS ADC: up to 24 channels
|
||||
- Digital filters for sigma delta modulator (DFSDM), 8 channels / 4 filters
|
||||
- 2×12-bit D/A converters
|
||||
- General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
|
||||
|
||||
开发板外观如下图所示：
|
||||
|
||||
|
||||
|
||||
该开发板常用 **板载资源** 如下：
|
||||
|
||||
- MCU：STM32f767，主频 216MHz，2MB FLASH ，512KB RAM ，16K CACHE
|
||||
|
||||
- 常用外设
|
||||
- LED ：3个，LED1 (绿色，PB0),LED2（蓝色，PB7），LED3（红色，PB14）
|
||||
- 按键：2个，B1（用户按键，PC13），B2（复位引脚）
|
||||
- 常用接口：USB 转串口3、以太网接口
|
||||
- 调试接口：ST-LINK
|
||||
|
||||
开发板更多详细信息请参考ST [NUCLEO-F767ZI开发板介绍](https://www.st.com/en/evaluation-tools/nucleo-f767zi.html)。
|
||||
|
||||
## 外设支持
|
||||
|
||||
本 BSP 目前对外设的支持情况如下：
|
||||
|
||||
| **板载外设** | **支持情况** | **备注** |
|
||||
| :-----------------| :----------: | :-------------------------------------|
|
||||
| USB 转串口3 | 支持 | |
|
||||
| 以太网 | 支持 | PHY 选项 LAN8720A（兼容 LAN8742A） |
|
||||
| **片上外设** | **支持情况** | **备注** |
|
||||
| GPIO | 支持 | PA0, PA1... PK15 ---> PIN: 0, 1...144 |
|
||||
| UART | 支持 | UART3 |
|
||||
| **扩展模块** | **支持情况** | **备注** |
|
||||
| 暂无 | 暂不支持 | 暂不支持 |
|
||||
|
||||
## 使用说明
|
||||
|
||||
使用说明分为如下两个章节：
|
||||
|
||||
- 快速上手
|
||||
|
||||
本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。
|
||||
|
||||
- 进阶使用
|
||||
|
||||
本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。
|
||||
- Up to 18 timers: up to thirteen 16-bit (1x low- power 16-bit timer available in Stop mode) and two 32-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input. All 15 timers running up to 216 MHz. 2x watchdogs, SysTick timer
|
||||
- Debug mode
|
||||
- SWD & JTAG interfaces
|
||||
- Cortex®-M7 Trace Macrocell™
|
||||
- Up to 168 I/O ports with interrupt capability
|
||||
- Up to 164 fast I/Os up to 108 MHz
|
||||
- Up to 166 5 V-tolerant I/Os
|
||||
- Up to 28 communication interfaces
|
||||
- Up to 4 I2C interfaces (SMBus/PMBus)
|
||||
- Up to 4 USARTs/4 UARTs (12.5 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)
|
||||
- Up to 6 SPIs (up to 54 Mbit/s), 3 with muxed simplex I2S for audio
|
||||
- 2 x SAIs (serial audio interface)
|
||||
- 3 × CANs (2.0B Active) and 2x SDMMCs
|
||||
- SPDIFRX interface
|
||||
- HDMI-CEC
|
||||
- MDIO slave interface
|
||||
- Advanced connectivity
|
||||
- USB 2.0 full-speed device/host/OTG controller with on-chip PHY
|
||||
- USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
|
||||
- 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
|
||||
- 8- to 14-bit camera interface up to 54 Mbyte/s
|
||||
- True random number generator
|
||||
- CRC calculation unit
|
||||
- RTC: subsecond accuracy, hardware calendar
|
||||
- 96-bit unique ID
|
||||
|
||||
|
||||
### 快速上手
|
||||
|
||||
本 BSP 为开发者提供 MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。
|
||||
## Read more
|
||||
|
||||
#### 硬件连接
|
||||
| Documents | Description |
|
||||
| :----------------------------------------------------------: | :----------------------------------------------------------: |
|
||||
| [STM32_Nucleo-144_BSP_Introduction](../docs/STM32_Nucleo-144_BSP_Introduction.md) | How to run RT-Thread on STM32 Nucleo-144 boards (**Must-Read**) |
|
||||
| [STM32F767ZI ST Official Website](https://www.st.com/en/microcontrollers-microprocessors/stm32f767zi.html#documentation) | STM32F767ZI datasheet and other resources |
|
||||
|
||||
使用数据线连接开发板到 PC，打开电源开关。
|
||||
|
||||
#### 编译下载
|
||||
|
||||
双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。
|
||||
## Maintained By
|
||||
|
||||
> 工程默认配置使用 ST-LINK 仿真器下载程序，在通过 ST-LINK 连接开发板的基础上，点击下载按钮即可下载程序到开发板
|
||||
[e31207077](https://github.com/e31207077) <e31207077@yahoo.com.tw>
|
||||
|
||||
#### 运行结果
|
||||
|
||||
下载程序成功之后，系统会自动运行，LED 闪烁。
|
||||
|
||||
连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息:
|
||||
## Translated By
|
||||
|
||||
```bash
|
||||
\ | /
|
||||
- RT - Thread Operating System
|
||||
/ | \ 4.0.0 build Jan 9 2019
|
||||
2006 - 2018 Copyright by rt-thread team
|
||||
msh >
|
||||
```
|
||||
### 进阶使用
|
||||
Meco Man @ RT-Thread Community
|
||||
|
||||
此 BSP 默认只开启了 GPIO 和 串口3 的功能，如果需使用 Ethernet 等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
|
||||
|
||||
1. 在 bsp 下打开 env 工具。
|
||||
|
||||
2. 输入`menuconfig`命令配置工程，配置好之后保存退出。
|
||||
|
||||
3. 输入`pkgs --update`命令更新软件包。
|
||||
|
||||
4. 输入`scons --target=mdk4/mdk5/iar` 命令重新生成工程。
|
||||
|
||||
本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。
|
||||
|
||||
## 注意事项
|
||||
|
||||
暂无
|
||||
|
||||
## 联系人信息
|
||||
|
||||
维护人:
|
||||
|
||||
- [e31207077](https://github.com/e31207077), 邮箱：<e31207077@yahoo.com.tw>
|
||||
> jiantingman@foxmail.com
|
||||
>
|
||||
> https://github.com/mysterywolf
|
||||
|
|
@ -0,0 +1,110 @@
|
|||
# STM32F767 NUCLEO-F767ZI开发板 BSP 说明
|
||||
## 简介
|
||||
|
||||
本文档为 NUCLEO-F767ZI 开发板的 BSP (板级支持包) 说明。
|
||||
|
||||
主要内容如下：
|
||||
|
||||
- 开发板资源介绍
|
||||
- BSP 快速上手
|
||||
- 进阶使用方法
|
||||
|
||||
通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。
|
||||
|
||||
## 开发板介绍
|
||||
|
||||
NUCLEO-F767ZI 是st推出的一款基于 ARM Cortex-M7 内核的开发板，最高主频为 216Mhz，该开发板具有丰富的板载资源，可以充分发挥 STM32F767 的芯片性能。
|
||||
|
||||
开发板外观如下图所示：
|
||||
|
||||
|
||||
|
||||
该开发板常用 **板载资源** 如下：
|
||||
|
||||
- MCU：STM32f767，主频 216MHz，2MB FLASH ，512KB RAM ，16K CACHE
|
||||
|
||||
- 常用外设
|
||||
- LED ：3个，LED1 (绿色，PB0),LED2（蓝色，PB7），LED3（红色，PB14）
|
||||
- 按键：2个，B1（用户按键，PC13），B2（复位引脚）
|
||||
- 常用接口：USB 转串口3、以太网接口
|
||||
- 调试接口：ST-LINK
|
||||
|
||||
开发板更多详细信息请参考ST [NUCLEO-F767ZI开发板介绍](https://www.st.com/en/evaluation-tools/nucleo-f767zi.html)。
|
||||
|
||||
## 外设支持
|
||||
|
||||
本 BSP 目前对外设的支持情况如下：
|
||||
|
||||
| **板载外设** | **支持情况** | **备注** |
|
||||
| :-----------------| :----------: | :-------------------------------------|
|
||||
| USB 转串口3 | 支持 | |
|
||||
| 以太网 | 支持 | PHY 选项 LAN8720A（兼容 LAN8742A） |
|
||||
| **片上外设** | **支持情况** | **备注** |
|
||||
| GPIO | 支持 | PA0, PA1... PK15 ---> PIN: 0, 1...144 |
|
||||
| UART | 支持 | UART3 |
|
||||
| **扩展模块** | **支持情况** | **备注** |
|
||||
| 暂无 | 暂不支持 | 暂不支持 |
|
||||
|
||||
## 使用说明
|
||||
|
||||
使用说明分为如下两个章节：
|
||||
|
||||
- 快速上手
|
||||
|
||||
本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。
|
||||
|
||||
- 进阶使用
|
||||
|
||||
本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。
|
||||
|
||||
|
||||
### 快速上手
|
||||
|
||||
本 BSP 为开发者提供 MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。
|
||||
|
||||
#### 硬件连接
|
||||
|
||||
使用数据线连接开发板到 PC，打开电源开关。
|
||||
|
||||
#### 编译下载
|
||||
|
||||
双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。
|
||||
|
||||
> 工程默认配置使用 ST-LINK 仿真器下载程序，在通过 ST-LINK 连接开发板的基础上，点击下载按钮即可下载程序到开发板
|
||||
|
||||
#### 运行结果
|
||||
|
||||
下载程序成功之后，系统会自动运行，LED 闪烁。
|
||||
|
||||
连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息:
|
||||
|
||||
```bash
|
||||
\ | /
|
||||
- RT - Thread Operating System
|
||||
/ | \ 4.0.0 build Jan 9 2019
|
||||
2006 - 2018 Copyright by rt-thread team
|
||||
msh >
|
||||
```
|
||||
### 进阶使用
|
||||
|
||||
此 BSP 默认只开启了 GPIO 和 串口3 的功能，如果需使用 Ethernet 等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
|
||||
|
||||
1. 在 bsp 下打开 env 工具。
|
||||
|
||||
2. 输入`menuconfig`命令配置工程，配置好之后保存退出。
|
||||
|
||||
3. 输入`pkgs --update`命令更新软件包。
|
||||
|
||||
4. 输入`scons --target=mdk4/mdk5/iar` 命令重新生成工程。
|
||||
|
||||
本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。
|
||||
|
||||
## 注意事项
|
||||
|
||||
暂无
|
||||
|
||||
## 联系人信息
|
||||
|
||||
维护人:
|
||||
|
||||
- [e31207077](https://github.com/e31207077), 邮箱：<e31207077@yahoo.com.tw>
|
||||
Loading…
Reference in New Issue