libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity

Merge pull request #3167 from Guozhanxin/usbd 

完善stm32 usb 驱动，在驱动开启中断，不需要在cubemx里配置了
This commit is contained in:
Bernard Xiong 2019-10-31 08:35:00 +08:00 committed by GitHub
parent 186d7cff06 d687c5ff21
commit 75ae3435d7
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
26 changed files with 373 additions and 243 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
bsp/stm32/libraries/HAL_Drivers/config/f1/usbd_config.h
View File

@ -11,10 +11,17 @@
#ifndef __USBD_CONFIG_H__
#define __USBD_CONFIG_H__
#define USBD_IRQ_TYPE USB_LP_CAN1_RX0_IRQn
#define USBD_IRQ_HANDLER USB_LP_CAN1_RX0_IRQHandler
#define USBD_INSTANCE USB
#define USBD_PCD_SPEED PCD_SPEED_FULL
#define USBD_PCD_PHY_MODULE PCD_PHY_EMBEDDED
#define BSP_USB_CONNECT_PIN -1
#ifndef BSP_USB_CONNECT_PIN
#define BSP_USB_CONNECT_PIN -1
#endif
#ifndef BSP_USB_PULL_UP_STATUS
#define BSP_USB_PULL_UP_STATUS 1
#endif
#endif

4
bsp/stm32/libraries/HAL_Drivers/config/f4/usbd_config.h
View File

@ -14,9 +14,11 @@
#include <rtconfig.h>
#ifdef BSP_USBD_TYPE_HS
#define USBD_IRQ_TYPE OTG_HS_IRQn
#define USBD_IRQ_HANDLER OTG_HS_IRQHandler
#define USBD_INSTANCE USB_OTG_HS
#else
#else
#define USBD_IRQ_TYPE OTG_FS_IRQn
#define USBD_IRQ_HANDLER OTG_FS_IRQHandler
#define USBD_INSTANCE USB_OTG_FS
#endif

2
bsp/stm32/libraries/HAL_Drivers/config/g4/usbd_config.h
View File

@ -14,9 +14,11 @@
#include <rtconfig.h>
#ifdef BSP_USBD_TYPE_HS
#define USBD_IRQ_TYPE OTG_HS_IRQn
#define USBD_IRQ_HANDLER OTG_HS_IRQHandler
#define USBD_INSTANCE USB_OTG_HS
#else
#define USBD_IRQ_TYPE OTG_FS_IRQn
#define USBD_IRQ_HANDLER OTG_FS_IRQHandler
#define USBD_INSTANCE USB_OTG_FS
#endif

4
bsp/stm32/libraries/HAL_Drivers/config/h7/usbd_config.h
View File

@ -14,9 +14,11 @@
#include <rtconfig.h>
#ifdef BSP_USBD_TYPE_HS
#define USBD_IRQ_TYPE OTG_HS_IRQn
#define USBD_IRQ_HANDLER OTG_HS_IRQHandler
#define USBD_INSTANCE USB_OTG_HS
#else
#else
#define USBD_IRQ_TYPE OTG_FS_IRQn
#define USBD_IRQ_HANDLER OTG_FS_IRQHandler
#define USBD_INSTANCE USB_OTG_FS
#endif

2
bsp/stm32/libraries/HAL_Drivers/config/l4/usbd_config.h
View File

@ -14,9 +14,11 @@
#include <rtconfig.h>
#ifdef BSP_USBD_TYPE_HS
#define USBD_IRQ_TYPE OTG_HS_IRQn
#define USBD_IRQ_HANDLER OTG_HS_IRQHandler
#define USBD_INSTANCE USB_OTG_HS
#else
#define USBD_IRQ_TYPE OTG_FS_IRQn
#define USBD_IRQ_HANDLER OTG_FS_IRQHandler
#define USBD_INSTANCE USB_OTG_FS
#endif

10
bsp/stm32/libraries/HAL_Drivers/drv_usbd.c
View File

@ -99,14 +99,14 @@ void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
{
#if defined(SOC_SERIES_STM32F1)
rt_pin_mode(BSP_USB_CONNECT_PIN,PIN_MODE_OUTPUT);
rt_pin_write(BSP_USB_CONNECT_PIN, PIN_HIGH);
rt_pin_write(BSP_USB_CONNECT_PIN, BSP_USB_PULL_UP_STATUS);
#endif
}
else
{
#if defined(SOC_SERIES_STM32F1)
rt_pin_mode(BSP_USB_CONNECT_PIN,PIN_MODE_OUTPUT);
rt_pin_write(BSP_USB_CONNECT_PIN, PIN_LOW);
rt_pin_write(BSP_USB_CONNECT_PIN, !BSP_USB_PULL_UP_STATUS);
#endif
}
}
@ -201,6 +201,9 @@ static rt_err_t _init(rt_device_t device)
#endif
/* Initialize LL Driver */
HAL_PCD_Init(pcd);
/* USB interrupt Init */
HAL_NVIC_SetPriority(USBD_IRQ_TYPE, 2, 0);
HAL_NVIC_EnableIRQ(USBD_IRQ_TYPE);
#if !defined(SOC_SERIES_STM32F1)
HAL_PCDEx_SetRxFiFo(pcd, 0x80);
HAL_PCDEx_SetTxFiFo(pcd, 0, 0x40);
@ -246,6 +249,9 @@ int stm_usbd_register(void)
/* Register endpoint infomation */
_stm_udc.ep_pool = _ep_pool;
_stm_udc.ep0.id = &_ep_pool[0];
#ifdef BSP_USBD_SPEED_HS
_stm_udc.device_is_hs = RT_TRUE;
#endif
rt_device_register((rt_device_t)&_stm_udc, "usbd", 0);
rt_usb_device_init();
return RT_EOK;

8
bsp/stm32/stm32f103-fire-arbitrary/README.md
View File

@ -44,7 +44,7 @@
| SPI Flash | 支持 | W25Q64 |
| 以太网 | 支持 | W5500 |
| 电位器 | 支持 | 使用 ADC1 |
| SD卡 | 即将支持 | |
| SD卡 | 支持 | |
| CAN | 支持 | |
| SDRAM | 即将支持 | |
| WIFI ESP8266 | 即将支持 | |
@ -57,9 +57,9 @@
| RTC | 支持 | 支持外部晶振和内部低速时钟 |
| WDT | 支持 | |
| FLASH | 支持 | 已适配 [FAL](https://github.com/RT-Thread-packages/fal) |
| SDIO | 暂不支持 | 即将支持 |
| PWM | 暂不支持 | 即将支持 |
| USB Device | 暂不支持 | 即将支持 |
| SDIO | 支持 | |
| PWM | 支持 | |
| USB Device | 支持 | |
| USB Host | 暂不支持 | 即将支持 |
| **扩展模块** | **支持情况** | **备注** |
| 暂无 | 暂不支持 | 暂不支持 |

12
bsp/stm32/stm32f103-fire-arbitrary/board/CubeMX_Config/.mxproject
View File

File diff suppressed because one or more lines are too long

175
bsp/stm32/stm32f103-fire-arbitrary/board/CubeMX_Config/Inc/stm32f1xx_hal_conf.h
View File

@ -5,29 +5,13 @@
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
@ -49,9 +33,10 @@
*/
#define HAL_MODULE_ENABLED
#define HAL_ADC_MODULE_ENABLED
#define HAL_ADC_MODULE_ENABLED
/*#define HAL_CRYP_MODULE_ENABLED */
#define HAL_CAN_MODULE_ENABLED
/*#define HAL_CAN_LEGACY_MODULE_ENABLED */
/*#define HAL_CEC_MODULE_ENABLED */
/*#define HAL_CORTEX_MODULE_ENABLED */
/*#define HAL_CRC_MODULE_ENABLED */
@ -67,7 +52,7 @@
/*#define HAL_NOR_MODULE_ENABLED */
/*#define HAL_NAND_MODULE_ENABLED */
/*#define HAL_PCCARD_MODULE_ENABLED */
/*#define HAL_PCD_MODULE_ENABLED */
#define HAL_PCD_MODULE_ENABLED
/*#define HAL_HCD_MODULE_ENABLED */
/*#define HAL_PWR_MODULE_ENABLED */
/*#define HAL_RCC_MODULE_ENABLED */
@ -82,11 +67,11 @@
#define HAL_UART_MODULE_ENABLED
/*#define HAL_USART_MODULE_ENABLED */
/*#define HAL_WWDG_MODULE_ENABLED */
/*#define HAL_EXTI_MODULE_ENABLED */
#define HAL_CORTEX_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED
#define HAL_GPIO_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
@ -147,6 +132,30 @@
#define USE_RTOS 0
#define PREFETCH_ENABLE 1
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
@ -210,155 +219,167 @@
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
/* ################## SPI peripheral configuration ########################## */
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
* Activated: CRC code is present inside driver
* Deactivated: CRC code cleaned from driver
*/
#define USE_SPI_CRC 0U
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include module's header file
* @brief Include module's header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
#include "stm32f1xx_hal_rcc.h"
#include "stm32f1xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32f1xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
#ifdef HAL_EXTI_MODULE_ENABLED
#include "stm32f1xx_hal_exti.h"
#include "stm32f1xx_hal_exti.h"
#endif /* HAL_EXTI_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32f1xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
#ifdef HAL_DMA_MODULE_ENABLED
#include "stm32f1xx_hal_dma.h"
#include "stm32f1xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
#ifdef HAL_ETH_MODULE_ENABLED
#include "stm32f1xx_hal_eth.h"
#endif /* HAL_ETH_MODULE_ENABLED */
#include "stm32f1xx_hal_eth.h"
#endif /* HAL_ETH_MODULE_ENABLED */
#ifdef HAL_CAN_MODULE_ENABLED
#include "stm32f1xx_hal_can.h"
#include "stm32f1xx_hal_can.h"
#endif /* HAL_CAN_MODULE_ENABLED */
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
#include "Legacy/stm32f1xx_hal_can_legacy.h"
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
#ifdef HAL_CEC_MODULE_ENABLED
#include "stm32f1xx_hal_cec.h"
#include "stm32f1xx_hal_cec.h"
#endif /* HAL_CEC_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
#include "stm32f1xx_hal_cortex.h"
#include "stm32f1xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
#ifdef HAL_ADC_MODULE_ENABLED
#include "stm32f1xx_hal_adc.h"
#include "stm32f1xx_hal_adc.h"
#endif /* HAL_ADC_MODULE_ENABLED */
#ifdef HAL_CRC_MODULE_ENABLED
#include "stm32f1xx_hal_crc.h"
#include "stm32f1xx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_DAC_MODULE_ENABLED
#include "stm32f1xx_hal_dac.h"
#include "stm32f1xx_hal_dac.h"
#endif /* HAL_DAC_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32f1xx_hal_flash.h"
#include "stm32f1xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_SRAM_MODULE_ENABLED
#include "stm32f1xx_hal_sram.h"
#include "stm32f1xx_hal_sram.h"
#endif /* HAL_SRAM_MODULE_ENABLED */
#ifdef HAL_NOR_MODULE_ENABLED
#include "stm32f1xx_hal_nor.h"
#include "stm32f1xx_hal_nor.h"
#endif /* HAL_NOR_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
#include "stm32f1xx_hal_i2c.h"
#include "stm32f1xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
#ifdef HAL_I2S_MODULE_ENABLED
#include "stm32f1xx_hal_i2s.h"
#include "stm32f1xx_hal_i2s.h"
#endif /* HAL_I2S_MODULE_ENABLED */
#ifdef HAL_IWDG_MODULE_ENABLED
#include "stm32f1xx_hal_iwdg.h"
#include "stm32f1xx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32f1xx_hal_pwr.h"
#include "stm32f1xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_RTC_MODULE_ENABLED
#include "stm32f1xx_hal_rtc.h"
#include "stm32f1xx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */
#ifdef HAL_PCCARD_MODULE_ENABLED
#include "stm32f1xx_hal_pccard.h"
#endif /* HAL_PCCARD_MODULE_ENABLED */
#include "stm32f1xx_hal_pccard.h"
#endif /* HAL_PCCARD_MODULE_ENABLED */
#ifdef HAL_SD_MODULE_ENABLED
#include "stm32f1xx_hal_sd.h"
#endif /* HAL_SD_MODULE_ENABLED */
#ifdef HAL_MMC_MODULE_ENABLED
#include "stm32f1xx_hal_mmc.h"
#endif /* HAL_MMC_MODULE_ENABLED */
#include "stm32f1xx_hal_sd.h"
#endif /* HAL_SD_MODULE_ENABLED */
#ifdef HAL_NAND_MODULE_ENABLED
#include "stm32f1xx_hal_nand.h"
#endif /* HAL_NAND_MODULE_ENABLED */
#include "stm32f1xx_hal_nand.h"
#endif /* HAL_NAND_MODULE_ENABLED */
#ifdef HAL_SPI_MODULE_ENABLED
#include "stm32f1xx_hal_spi.h"
#include "stm32f1xx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */
#ifdef HAL_TIM_MODULE_ENABLED
#include "stm32f1xx_hal_tim.h"
#include "stm32f1xx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */
#ifdef HAL_UART_MODULE_ENABLED
#include "stm32f1xx_hal_uart.h"
#include "stm32f1xx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */
#ifdef HAL_USART_MODULE_ENABLED
#include "stm32f1xx_hal_usart.h"
#include "stm32f1xx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */
#ifdef HAL_IRDA_MODULE_ENABLED
#include "stm32f1xx_hal_irda.h"
#include "stm32f1xx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
#include "stm32f1xx_hal_smartcard.h"
#include "stm32f1xx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
#ifdef HAL_WWDG_MODULE_ENABLED
#include "stm32f1xx_hal_wwdg.h"
#include "stm32f1xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */
#ifdef HAL_PCD_MODULE_ENABLED
#include "stm32f1xx_hal_pcd.h"
#include "stm32f1xx_hal_pcd.h"
#endif /* HAL_PCD_MODULE_ENABLED */
#ifdef HAL_HCD_MODULE_ENABLED
#include "stm32f1xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */
#include "stm32f1xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */
#ifdef HAL_MMC_MODULE_ENABLED
#include "stm32f1xx_hal_mmc.h"
#endif /* HAL_MMC_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr: If expr is false, it calls assert_failed function
* @param expr If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t* file, uint32_t line);
void assert_failed(uint8_t* file, uint32_t line);
#else
#define assert_param(expr) ((void)0U)
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
#ifdef __cplusplus

97
bsp/stm32/stm32f103-fire-arbitrary/board/CubeMX_Config/Src/main.c
View File

@ -64,6 +64,8 @@
/* Private variables ---------------------------------------------------------*/
ADC_HandleTypeDef hadc1;
CAN_HandleTypeDef hcan;
IWDG_HandleTypeDef hiwdg;
RTC_HandleTypeDef hrtc;
@ -82,6 +84,8 @@ UART_HandleTypeDef huart1;
UART_HandleTypeDef huart2;
UART_HandleTypeDef huart3;
PCD_HandleTypeDef hpcd_USB_FS;
/* USER CODE BEGIN PV */
/* Private variables ---------------------------------------------------------*/
@ -103,6 +107,8 @@ static void MX_TIM3_Init(void);
static void MX_TIM4_Init(void);
static void MX_TIM5_Init(void);
static void MX_SDIO_SD_Init(void);
static void MX_CAN_Init(void);
static void MX_USB_PCD_Init(void);
/* USER CODE BEGIN PFP */
/* Private function prototypes -----------------------------------------------*/
@ -122,6 +128,7 @@ int main(void)
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/* MCU Configuration--------------------------------------------------------*/
@ -154,6 +161,8 @@ int main(void)
MX_TIM4_Init();
MX_TIM5_Init();
MX_SDIO_SD_Init();
MX_CAN_Init();
MX_USB_PCD_Init();
/* USER CODE BEGIN 2 */
/* USER CODE END 2 */
@ -181,7 +190,7 @@ void SystemClock_Config(void)
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
/**Initializes the CPU, AHB and APB busses clocks
/** Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE
|RCC_OSCILLATORTYPE_LSE;
@ -192,12 +201,12 @@ void SystemClock_Config(void)
RCC_OscInitStruct.LSIState = RCC_LSI_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}
/**Initializes the CPU, AHB and APB busses clocks
/** Initializes the CPU, AHB and APB busses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
@ -206,13 +215,15 @@ void SystemClock_Config(void)
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
{
Error_Handler();
}
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_ADC;
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_ADC
|RCC_PERIPHCLK_USB;
PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6;
PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV4;
PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
{
Error_Handler();
@ -236,7 +247,7 @@ static void MX_ADC1_Init(void)
/* USER CODE BEGIN ADC1_Init 1 */
/* USER CODE END ADC1_Init 1 */
/**Common config
/** Common config
*/
hadc1.Instance = ADC1;
hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
@ -249,7 +260,7 @@ static void MX_ADC1_Init(void)
{
Error_Handler();
}
/**Configure Regular Channel
/** Configure Regular Channel
*/
sConfig.Channel = ADC_CHANNEL_11;
sConfig.Rank = ADC_REGULAR_RANK_1;
@ -264,6 +275,43 @@ static void MX_ADC1_Init(void)
}
/**
* @brief CAN Initialization Function
* @param None
* @retval None
*/
static void MX_CAN_Init(void)
{
/* USER CODE BEGIN CAN_Init 0 */
/* USER CODE END CAN_Init 0 */
/* USER CODE BEGIN CAN_Init 1 */
/* USER CODE END CAN_Init 1 */
hcan.Instance = CAN1;
hcan.Init.Prescaler = 16;
hcan.Init.Mode = CAN_MODE_NORMAL;
hcan.Init.SyncJumpWidth = CAN_SJW_1TQ;
hcan.Init.TimeSeg1 = CAN_BS1_1TQ;
hcan.Init.TimeSeg2 = CAN_BS2_1TQ;
hcan.Init.TimeTriggeredMode = DISABLE;
hcan.Init.AutoBusOff = DISABLE;
hcan.Init.AutoWakeUp = DISABLE;
hcan.Init.AutoRetransmission = DISABLE;
hcan.Init.ReceiveFifoLocked = DISABLE;
hcan.Init.TransmitFifoPriority = DISABLE;
if (HAL_CAN_Init(&hcan) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN CAN_Init 2 */
/* USER CODE END CAN_Init 2 */
}
/**
* @brief IWDG Initialization Function
* @param None
@ -307,7 +355,7 @@ static void MX_RTC_Init(void)
/* USER CODE BEGIN RTC_Init 1 */
/* USER CODE END RTC_Init 1 */
/**Initialize RTC Only
/** Initialize RTC Only
*/
hrtc.Instance = RTC;
hrtc.Init.AsynchPrediv = RTC_AUTO_1_SECOND;
@ -735,6 +783,37 @@ static void MX_USART3_UART_Init(void)
}
/**
* @brief USB Initialization Function
* @param None
* @retval None
*/
static void MX_USB_PCD_Init(void)
{
/* USER CODE BEGIN USB_Init 0 */
/* USER CODE END USB_Init 0 */
/* USER CODE BEGIN USB_Init 1 */
/* USER CODE END USB_Init 1 */
hpcd_USB_FS.Instance = USB;
hpcd_USB_FS.Init.dev_endpoints = 8;
hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
hpcd_USB_FS.Init.low_power_enable = DISABLE;
hpcd_USB_FS.Init.lpm_enable = DISABLE;
hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN USB_Init 2 */
/* USER CODE END USB_Init 2 */
}
/**
* @brief GPIO Initialization Function
* @param None

68
bsp/stm32/stm32f103-fire-arbitrary/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
View File

@ -94,7 +94,7 @@ void HAL_MspInit(void)
/* System interrupt init*/
/**NOJTAG: JTAG-DP Disabled and SW-DP Enabled
/** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
*/
__HAL_AFIO_REMAP_SWJ_NOJTAG();
@ -111,7 +111,6 @@ void HAL_MspInit(void)
*/
void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hadc->Instance==ADC1)
{
@ -142,10 +141,8 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
* @param hadc: ADC handle pointer
* @retval None
*/
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
{
if(hadc->Instance==ADC1)
{
/* USER CODE BEGIN ADC1_MspDeInit 0 */
@ -174,7 +171,6 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
*/
void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hcan->Instance==CAN1)
{
@ -214,10 +210,8 @@ void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
* @param hcan: CAN handle pointer
* @retval None
*/
void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
{
if(hcan->Instance==CAN1)
{
/* USER CODE BEGIN CAN1_MspDeInit 0 */
@ -247,7 +241,6 @@ void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
*/
void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
{
if(hrtc->Instance==RTC)
{
/* USER CODE BEGIN RTC_MspInit 0 */
@ -271,10 +264,8 @@ void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
* @param hrtc: RTC handle pointer
* @retval None
*/
void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
{
if(hrtc->Instance==RTC)
{
/* USER CODE BEGIN RTC_MspDeInit 0 */
@ -297,7 +288,6 @@ void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
*/
void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hsd->Instance==SDIO)
{
@ -341,10 +331,8 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
* @param hsd: SD handle pointer
* @retval None
*/
void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
{
if(hsd->Instance==SDIO)
{
/* USER CODE BEGIN SDIO_MspDeInit 0 */
@ -381,7 +369,6 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
*/
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hspi->Instance==SPI1)
{
@ -448,10 +435,8 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
* @param hspi: SPI handle pointer
* @retval None
*/
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
{
if(hspi->Instance==SPI1)
{
/* USER CODE BEGIN SPI1_MspDeInit 0 */
@ -501,7 +486,6 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
*/
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
{
if(htim_base->Instance==TIM2)
{
/* USER CODE BEGIN TIM2_MspInit 0 */
@ -551,7 +535,6 @@ void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(htim->Instance==TIM3)
{
@ -584,10 +567,8 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
* @param htim_base: TIM_Base handle pointer
* @retval None
*/
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
{
if(htim_base->Instance==TIM2)
{
/* USER CODE BEGIN TIM2_MspDeInit 0 */
@ -643,7 +624,6 @@ void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
*/
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(huart->Instance==USART1)
{
@ -738,10 +718,8 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
* @param huart: UART handle pointer
* @retval None
*/
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
{
if(huart->Instance==USART1)
{
/* USER CODE BEGIN USART1_MspDeInit 0 */
@ -801,6 +779,50 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
}
/**
* @brief PCD MSP Initialization
* This function configures the hardware resources used in this example
* @param hpcd: PCD handle pointer
* @retval None
*/
void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
{
if(hpcd->Instance==USB)
{
/* USER CODE BEGIN USB_MspInit 0 */
/* USER CODE END USB_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_USB_CLK_ENABLE();
/* USER CODE BEGIN USB_MspInit 1 */
/* USER CODE END USB_MspInit 1 */
}
}
/**
* @brief PCD MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hpcd: PCD handle pointer
* @retval None
*/
void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
{
if(hpcd->Instance==USB)
{
/* USER CODE BEGIN USB_MspDeInit 0 */
/* USER CODE END USB_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_USB_CLK_DISABLE();
/* USER CODE BEGIN USB_MspDeInit 1 */
/* USER CODE END USB_MspDeInit 1 */
}
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */

118
bsp/stm32/stm32f103-fire-arbitrary/board/CubeMX_Config/stm32f103zet6.ioc
View File

@ -5,8 +5,8 @@ ADC1.NbrOfConversionFlag=1
ADC1.Rank-0\#ChannelRegularConversion=1
ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
ADC1.master=1
CAN.CalculateTimeBit=1333
CAN.CalculateTimeQuantum=444.44444444444446
CAN.CalculateTimeBit=2000
CAN.CalculateTimeQuantum=666.6666666666666
CAN.IPParameters=CalculateTimeQuantum,CalculateTimeBit
File.Version=6
KeepUserPlacement=false
@ -20,6 +20,7 @@ Mcu.IP13=TIM5
Mcu.IP14=USART1
Mcu.IP15=USART2
Mcu.IP16=USART3
Mcu.IP17=USB
Mcu.IP2=IWDG
Mcu.IP3=NVIC
Mcu.IP4=RCC
@ -28,7 +29,7 @@ Mcu.IP6=SDIO
Mcu.IP7=SPI1
Mcu.IP8=SPI2
Mcu.IP9=SYS
Mcu.IPNb=17
Mcu.IPNb=18
Mcu.Name=STM32F103Z(C-D-E)Tx
Mcu.Package=LQFP144
Mcu.Pin0=PC14-OSC32_IN
@ -45,52 +46,59 @@ Mcu.Pin18=PC9
Mcu.Pin19=PA9
Mcu.Pin2=OSC_IN
Mcu.Pin20=PA10
Mcu.Pin21=PA13
Mcu.Pin22=PA14
Mcu.Pin23=PC10
Mcu.Pin24=PC11
Mcu.Pin25=PC12
Mcu.Pin26=PD2
Mcu.Pin27=PB5
Mcu.Pin28=PB8
Mcu.Pin29=PB9
Mcu.Pin21=PA11
Mcu.Pin22=PA12
Mcu.Pin23=PA13
Mcu.Pin24=PA14
Mcu.Pin25=PC10
Mcu.Pin26=PC11
Mcu.Pin27=PC12
Mcu.Pin28=PD2
Mcu.Pin29=PB5
Mcu.Pin3=OSC_OUT
Mcu.Pin30=VP_IWDG_VS_IWDG
Mcu.Pin31=VP_RTC_VS_RTC_Activate
Mcu.Pin32=VP_SYS_VS_Systick
Mcu.Pin33=VP_TIM2_VS_ClockSourceINT
Mcu.Pin34=VP_TIM3_VS_ClockSourceINT
Mcu.Pin35=VP_TIM4_VS_ClockSourceINT
Mcu.Pin36=VP_TIM5_VS_ClockSourceINT
Mcu.Pin30=PB8
Mcu.Pin31=PB9
Mcu.Pin32=VP_IWDG_VS_IWDG
Mcu.Pin33=VP_RTC_VS_RTC_Activate
Mcu.Pin34=VP_SYS_VS_Systick
Mcu.Pin35=VP_TIM2_VS_ClockSourceINT
Mcu.Pin36=VP_TIM3_VS_ClockSourceINT
Mcu.Pin37=VP_TIM4_VS_ClockSourceINT
Mcu.Pin38=VP_TIM5_VS_ClockSourceINT
Mcu.Pin4=PC1
Mcu.Pin5=PA2
Mcu.Pin6=PA3
Mcu.Pin7=PA5
Mcu.Pin8=PA6
Mcu.Pin9=PA7
Mcu.PinsNb=37
Mcu.PinsNb=39
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32F103ZETx
MxCube.Version=5.0.1
MxDb.Version=DB.5.0.1
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false
MxCube.Version=5.4.0
MxDb.Version=DB.5.0.40
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.ForceEnableDMAVector=true
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true\:true
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
OSC_IN.Mode=HSE-External-Oscillator
OSC_IN.Signal=RCC_OSC_IN
OSC_OUT.Mode=HSE-External-Oscillator
OSC_OUT.Signal=RCC_OSC_OUT
PA10.Mode=Asynchronous
PA10.Signal=USART1_RX
PA11.Mode=Device
PA11.Signal=USB_DM
PA12.Mode=Device
PA12.Signal=USB_DP
PA13.Mode=Serial_Wire
PA13.Signal=SYS_JTMS-SWDIO
PA14.Mode=Serial_Wire
@ -179,35 +187,35 @@ ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=MDK-ARM V5
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_SPI2_Init-SPI2-false-HAL-true,5-MX_USART2_UART_Init-USART2-false-HAL-true,6-MX_SPI1_Init-SPI1-false-HAL-true,7-MX_USART3_UART_Init-USART3-false-HAL-true,8-MX_ADC1_Init-ADC1-false-HAL-true,9-MX_RTC_Init-RTC-false-HAL-true,10-MX_IWDG_Init-IWDG-false-HAL-true,11-MX_TIM2_Init-TIM2-false-HAL-true,12-MX_TIM3_Init-TIM3-false-HAL-true,13-MX_TIM4_Init-TIM4-false-HAL-true,14-MX_TIM5_Init-TIM5-false-HAL-true,15-MX_SDIO_SD_Init-SDIO-false-HAL-true,16-MX_CAN_Init-CAN-false-HAL-true
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_SPI2_Init-SPI2-false-HAL-true,5-MX_USART2_UART_Init-USART2-false-HAL-true,6-MX_SPI1_Init-SPI1-false-HAL-true,7-MX_USART3_UART_Init-USART3-false-HAL-true,8-MX_ADC1_Init-ADC1-false-HAL-true,9-MX_RTC_Init-RTC-false-HAL-true,10-MX_IWDG_Init-IWDG-false-HAL-true,11-MX_TIM2_Init-TIM2-false-HAL-true,12-MX_TIM3_Init-TIM3-false-HAL-true,13-MX_TIM4_Init-TIM4-false-HAL-true,14-MX_TIM5_Init-TIM5-false-HAL-true,15-MX_SDIO_SD_Init-SDIO-false-HAL-true,16-MX_CAN_Init-CAN-false-HAL-true,17-MX_USB_PCD_Init-USB-false-HAL-true
RCC.ADCFreqValue=12000000
RCC.ADCPresc=RCC_ADCPCLK2_DIV6
RCC.AHBFreq_Value=72000000
RCC.ADCPresc=RCC_ADCPCLK2_DIV4
RCC.AHBFreq_Value=48000000
RCC.APB1CLKDivider=RCC_HCLK_DIV2
RCC.APB1Freq_Value=36000000
RCC.APB1TimFreq_Value=72000000
RCC.APB2Freq_Value=72000000
RCC.APB2TimFreq_Value=72000000
RCC.FCLKCortexFreq_Value=72000000
RCC.FSMCFreq_Value=72000000
RCC.APB1Freq_Value=24000000
RCC.APB1TimFreq_Value=48000000
RCC.APB2Freq_Value=48000000
RCC.APB2TimFreq_Value=48000000
RCC.FCLKCortexFreq_Value=48000000
RCC.FSMCFreq_Value=48000000
RCC.FamilyName=M
RCC.HCLKFreq_Value=72000000
RCC.I2S2Freq_Value=72000000
RCC.I2S3Freq_Value=72000000
RCC.HCLKFreq_Value=48000000
RCC.I2S2Freq_Value=48000000
RCC.I2S3Freq_Value=48000000
RCC.IPParameters=ADCFreqValue,ADCPresc,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,FCLKCortexFreq_Value,FSMCFreq_Value,FamilyName,HCLKFreq_Value,I2S2Freq_Value,I2S3Freq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLMCOFreq_Value,PLLMUL,PLLSourceVirtual,RTCClockSelection,RTCFreq_Value,SDIOFreq_Value,SDIOHCLKDiv2FreqValue,SYSCLKFreq_VALUE,SYSCLKSource,TimSysFreq_Value,USBFreq_Value,VCOOutput2Freq_Value
RCC.MCOFreq_Value=72000000
RCC.PLLCLKFreq_Value=72000000
RCC.PLLMCOFreq_Value=36000000
RCC.PLLMUL=RCC_PLL_MUL9
RCC.MCOFreq_Value=48000000
RCC.PLLCLKFreq_Value=48000000
RCC.PLLMCOFreq_Value=24000000
RCC.PLLMUL=RCC_PLL_MUL6
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE
RCC.RTCFreq_Value=32768
RCC.SDIOFreq_Value=72000000
RCC.SDIOHCLKDiv2FreqValue=36000000
RCC.SYSCLKFreq_VALUE=72000000
RCC.SDIOFreq_Value=48000000
RCC.SDIOHCLKDiv2FreqValue=24000000
RCC.SYSCLKFreq_VALUE=48000000
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
RCC.TimSysFreq_Value=72000000
RCC.USBFreq_Value=72000000
RCC.TimSysFreq_Value=48000000
RCC.USBFreq_Value=48000000
RCC.VCOOutput2Freq_Value=8000000
SH.ADCx_IN11.0=ADC1_IN11,IN11
SH.ADCx_IN11.ConfNb=1
@ -218,12 +226,12 @@ SH.S_TIM3_CH3.ConfNb=1
SH.S_TIM3_CH4.0=TIM3_CH4,PWM Generation4 CH4
SH.S_TIM3_CH4.ConfNb=1
SPI1.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_4
SPI1.CalculateBaudRate=18.0 MBits/s
SPI1.CalculateBaudRate=12.0 MBits/s
SPI1.Direction=SPI_DIRECTION_2LINES
SPI1.IPParameters=VirtualType,Mode,Direction,BaudRatePrescaler,CalculateBaudRate
SPI1.Mode=SPI_MODE_MASTER
SPI1.VirtualType=VM_MASTER
SPI2.CalculateBaudRate=18.0 MBits/s
SPI2.CalculateBaudRate=12.0 MBits/s
SPI2.Direction=SPI_DIRECTION_2LINES
SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
SPI2.Mode=SPI_MODE_MASTER

18
bsp/stm32/stm32f103-fire-arbitrary/board/Kconfig
View File

@ -280,8 +280,8 @@ menu "On-chip Peripheral Drivers"
select RT_USING_SDIO
select RT_USING_DFS
default n
menuconfig BSP_USING_CAN
menuconfig BSP_USING_CAN
bool "Enable CAN"
default n
select RT_USING_CAN
@ -290,6 +290,20 @@ menu "On-chip Peripheral Drivers"
bool "using CAN1"
default n
endif
config BSP_USING_USBD
bool "Enable USB device"
select RT_USING_USB_DEVICE
default n
if BSP_USING_USBD
config BSP_USB_CONNECT_PIN
int "USB connect pin"
default 67
config BSP_USB_PULL_UP_STATUS
int "USB PULL UP STATUS"
default 0
endif
source "../libraries/HAL_Drivers/Kconfig"
endmenu

14
bsp/stm32/stm32f103-fire-arbitrary/board/board.c
View File

@ -17,7 +17,7 @@ void SystemClock_Config(void)
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
/**Initializes the CPU, AHB and APB busses clocks
/** Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE
|RCC_OSCILLATORTYPE_LSE;
@ -28,12 +28,12 @@ void SystemClock_Config(void)
RCC_OscInitStruct.LSIState = RCC_LSI_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}
/**Initializes the CPU, AHB and APB busses clocks
/** Initializes the CPU, AHB and APB busses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
@ -42,13 +42,15 @@ void SystemClock_Config(void)
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
{
Error_Handler();
}
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_ADC;
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_ADC
|RCC_PERIPHCLK_USB;
PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6;
PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV4;
PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
{
Error_Handler();

3
bsp/stm32/stm32f412-st-nucleo/README.md
View File

@ -39,7 +39,8 @@
| :------------ | :----------: | :-----------------------------------: |
| GPIO | 支持 | PA0, PA1... PH1 ---> PIN: 0, 1...63 |
| UART | 支持 | UART2,UART3 |
| onchip_flash | 支持 | |
| Onchip Flash | 支持 | |
| USB Device | 支持 | |
## 使用说明

4
bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/.mxproject
View File

@ -1,7 +1,7 @@
[PreviousGenFiles]
HeaderPath=D:/work/rt-thread-me/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Inc
HeaderPath=D:/work/rt-thread/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Inc
HeaderFiles=stm32f4xx_it.h;stm32f4xx_hal_conf.h;main.h;
SourcePath=D:/work/rt-thread-me/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src
SourcePath=D:/work/rt-thread/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src
SourceFiles=stm32f4xx_it.c;stm32f4xx_hal_msp.c;main.c;
[PreviousLibFiles]

3
bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
View File

@ -43,7 +43,6 @@ NVIC.ForceEnableDMAVector=true
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.OTG_FS_IRQn=true\:0\:0\:false\:false\:true\:true\:true
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
@ -141,7 +140,7 @@ PH0\ -\ OSC_IN.Signal=RCC_OSC_IN
PH1\ -\ OSC_OUT.Mode=HSE-External-Clock-Source
PH1\ -\ OSC_OUT.Signal=RCC_OSC_OUT
PinOutPanel.RotationAngle=0
ProjectManager.AskForMigrate=true
ProjectManager.AskForMigrate=false
ProjectManager.BackupPrevious=false
ProjectManager.CompilerOptimize=6
ProjectManager.ComputerToolchain=false

1
bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Inc/stm32f4xx_it.h
View File

@ -71,7 +71,6 @@ void SVC_Handler(void);
void DebugMon_Handler(void);
void PendSV_Handler(void);
void SysTick_Handler(void);
void OTG_FS_IRQHandler(void);
/* USER CODE BEGIN EFP */
/* USER CODE END EFP */

5
bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
View File

@ -197,9 +197,6 @@ void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
/* Peripheral clock enable */
__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
/* USB_OTG_FS interrupt Init */
HAL_NVIC_SetPriority(OTG_FS_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(OTG_FS_IRQn);
/* USER CODE BEGIN USB_OTG_FS_MspInit 1 */
/* USER CODE END USB_OTG_FS_MspInit 1 */
@ -233,8 +230,6 @@ void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
*/
HAL_GPIO_DeInit(GPIOA, USB_SOF_Pin|USB_ID_Pin|USB_DM_Pin|USB_DP_Pin);
/* USB_OTG_FS interrupt DeInit */
HAL_NVIC_DisableIRQ(OTG_FS_IRQn);
/* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */
/* USER CODE END USB_OTG_FS_MspDeInit 1 */

15
bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_it.c
View File

@ -71,7 +71,6 @@
/* USER CODE END 0 */
/* External variables --------------------------------------------------------*/
extern PCD_HandleTypeDef hpcd_USB_OTG_FS;
/* USER CODE BEGIN EV */
/* USER CODE END EV */
@ -212,20 +211,6 @@ void SysTick_Handler(void)
/* please refer to the startup file (startup_stm32f4xx.s). */
/******************************************************************************/
/**
* @brief This function handles USB On The Go FS global interrupt.
*/
void OTG_FS_IRQHandler(void)
{
/* USER CODE BEGIN OTG_FS_IRQn 0 */
/* USER CODE END OTG_FS_IRQn 0 */
HAL_PCD_IRQHandler(&hpcd_USB_OTG_FS);
/* USER CODE BEGIN OTG_FS_IRQn 1 */
/* USER CODE END OTG_FS_IRQn 1 */
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */

15
bsp/stm32/stm32h750-armfly-h7-tool/README.md
View File

@ -32,13 +32,14 @@ STM32H750 是安富莱推出的一款基于 ARM Cortex-M7 内核的开发板，
本 BSP 目前对外设的支持情况如下：
| **板载外设** | **支持情况** | **备注** |
| :----------------- | :----------: | :------------------------------------- |
| LCD | 待支持 ||
| ESP32 | 支持 |AT固件|
| **片上外设** | **支持情况** | **备注** |
| GPIO | 支持 | |
| UART | 支持 | UART1 |
| **板载外设** | **支持情况** | **备注** |
| :----------- | :----------: | :------- |
| LCD | 待支持 | |
| ESP32 | 支持 | AT固件 |
| **片上外设** | **支持情况** | **备注** |
| GPIO | 支持 | |
| UART | 支持 | UART1 |
| USB Device | 支持 | USB HS |
## 使用说明

4
bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/.mxproject
View File

@ -1,7 +1,7 @@
[PreviousGenFiles]
HeaderPath=D:/work/rt-thread-me/bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/Inc
HeaderPath=D:/work/rt-thread/bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/Inc
HeaderFiles=stm32h7xx_it.h;stm32h7xx_hal_conf.h;main.h;
SourcePath=D:/work/rt-thread-me/bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/Src
SourcePath=D:/work/rt-thread/bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/Src
SourceFiles=stm32h7xx_it.c;stm32h7xx_hal_msp.c;main.c;
[PreviousLibFiles]

3
bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/CubeMX_Config.ioc
View File

@ -96,7 +96,6 @@ NVIC.ForceEnableDMAVector=true
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.OTG_HS_IRQn=true\:0\:0\:false\:false\:true\:true\:true
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
@ -224,7 +223,7 @@ PI11.Mode=Device_HS
PI11.Signal=USB_OTG_HS_ULPI_DIR
PinOutPanel.CurrentBGAView=Top
PinOutPanel.RotationAngle=0
ProjectManager.AskForMigrate=false
ProjectManager.AskForMigrate=true
ProjectManager.BackupPrevious=false
ProjectManager.CompilerOptimize=6
ProjectManager.ComputerToolchain=false

1
bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/Inc/stm32h7xx_it.h
View File

@ -56,7 +56,6 @@ void SVC_Handler(void);
void DebugMon_Handler(void);
void PendSV_Handler(void);
void SysTick_Handler(void);
void OTG_HS_IRQHandler(void);
/* USER CODE BEGIN EFP */
/* USER CODE END EFP */

5
bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c
View File

@ -871,9 +871,6 @@ void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
/* Peripheral clock enable */
__HAL_RCC_USB_OTG_HS_CLK_ENABLE();
__HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE();
/* USB_OTG_HS interrupt Init */
HAL_NVIC_SetPriority(OTG_HS_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(OTG_HS_IRQn);
/* USER CODE BEGIN USB_OTG_HS_MspInit 1 */
/* USER CODE END USB_OTG_HS_MspInit 1 */
@ -923,8 +920,6 @@ void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_3);
/* USB_OTG_HS interrupt DeInit */
HAL_NVIC_DisableIRQ(OTG_HS_IRQn);
/* USER CODE BEGIN USB_OTG_HS_MspDeInit 1 */
/* USER CODE END USB_OTG_HS_MspDeInit 1 */

16
bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/Src/stm32h7xx_it.c
View File

@ -56,7 +56,7 @@
/* USER CODE END 0 */
/* External variables --------------------------------------------------------*/
extern PCD_HandleTypeDef hpcd_USB_OTG_HS;
/* USER CODE BEGIN EV */
/* USER CODE END EV */
@ -197,20 +197,6 @@ void SysTick_Handler(void)
/* please refer to the startup file (startup_stm32h7xx.s). */
/******************************************************************************/
/**
* @brief This function handles USB On The Go HS global interrupt.
*/
void OTG_HS_IRQHandler(void)
{
/* USER CODE BEGIN OTG_HS_IRQn 0 */
/* USER CODE END OTG_HS_IRQn 0 */
HAL_PCD_IRQHandler(&hpcd_USB_OTG_HS);
/* USER CODE BEGIN OTG_HS_IRQn 1 */
/* USER CODE END OTG_HS_IRQn 1 */
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */