libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity

[bsp][stm32] update kconfig

This commit is contained in:
SummerGift 2019-01-08 12:04:44 +08:00
parent 574492a282
commit 74395fd114
12 changed files with 772 additions and 239 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

43
bsp/stm32/stm32f091-st-nucleo/board/Kconfig
View File

@ -9,6 +9,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (uart2)" bool "Enable USB TO USART (uart2)"
select BSP_USING_UART
select BSP_USING_UART2 select BSP_USING_UART2
default y default y
@ -21,21 +22,53 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN select RT_USING_PIN
default y default y
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1 config BSP_USING_UART1
bool "Enable UART1" bool "Enable UART1"
select RT_USING_SERIAL default y
default n
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y
config BSP_USING_UART2 config BSP_USING_UART2
bool "Enable UART2" bool "Enable UART2"
select RT_USING_SERIAL default n
default y
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n
endif
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI1 config BSP_USING_SPI1
bool "Enable SPI1 BUS" bool "Enable SPI1 BUS"
select RT_USING_SPI
default n default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n
endif
menuconfig BSP_USING_I2C1 menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)" bool "Enable I2C1 BUS (software simulation)"
default n default n

65
bsp/stm32/stm32f103-atk-nano/board/Kconfig
View File

@ -9,6 +9,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (uart1)" bool "Enable USB TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1 select BSP_USING_UART1
default y default y
@ -19,6 +20,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_SPI_FLASH config BSP_USING_SPI_FLASH
bool "Enable SPI FLASH (w25q16 spi2)" bool "Enable SPI FLASH (w25q16 spi2)"
select BSP_USING_SPI
select BSP_USING_SPI2 select BSP_USING_SPI2
select RT_USING_SFUD select RT_USING_SFUD
select RT_SFUD_USING_SFDP select RT_SFUD_USING_SFDP
@ -39,6 +41,39 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN select RT_USING_PIN
default y default y
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1
bool "Enable UART1"
default y
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default n
config BSP_USING_UART2
bool "Enable UART2"
default n
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n
config BSP_USING_UART3
bool "Enable UART3"
default n
config BSP_UART3_RX_USING_DMA
bool "Enable UART3 RX DMA"
depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
default n
endif
config BSP_USING_UART1 config BSP_USING_UART1
bool "Enable UART1" bool "Enable UART1"
select RT_USING_SERIAL select RT_USING_SERIAL
@ -91,20 +126,42 @@ menu "On-chip Peripheral Drivers"
endif endif
endif endif
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI1 config BSP_USING_SPI1
bool "Enable SPI1 BUS" bool "Enable SPI1 BUS"
select RT_USING_SPI default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n default n
config BSP_USING_SPI2 config BSP_USING_SPI2
bool "Enable SPI2 BUS" bool "Enable SPI2 BUS"
select RT_USING_SPI
default n default n
config BSP_SPI_USING_DMA config BSP_SPI2_TX_USING_DMA
bool "Enable SPI DMA support" bool "Enable SPI2 TX DMA"
depends on BSP_USING_SPI2
default n default n
config BSP_SPI2_RX_USING_DMA
bool "Enable SPI2 RX DMA"
depends on BSP_USING_SPI2
select BSP_SPI2_TX_USING_DMA
default n
endif
menuconfig BSP_USING_I2C1 menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)" bool "Enable I2C1 BUS (software simulation)"
default n default n

189
bsp/stm32/stm32f103-atk-nano/project.uvprojx
View File

@ -1,10 +1,7 @@
<?xml version="1.0" encoding="UTF-8" standalone="no" ?> <?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd"> <Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
<SchemaVersion>2.1</SchemaVersion> <SchemaVersion>2.1</SchemaVersion>
<Header>### uVision Project, (C) Keil Software</Header> <Header>### uVision Project, (C) Keil Software</Header>
<Targets> <Targets>
<Target> <Target>
<TargetName>rt-thread</TargetName> <TargetName>rt-thread</TargetName>
@ -19,28 +16,28 @@
<PackID>Keil.STM32F1xx_DFP.2.2.0</PackID> <PackID>Keil.STM32F1xx_DFP.2.2.0</PackID>
<PackURL>http://www.keil.com/pack/</PackURL> <PackURL>http://www.keil.com/pack/</PackURL>
<Cpu>IRAM(0x20000000,0x5000) IROM(0x08000000,0x20000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu> <Cpu>IRAM(0x20000000,0x5000) IROM(0x08000000,0x20000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec> <FlashUtilSpec />
<StartupFile></StartupFile> <StartupFile />
<FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103RB$Flash\STM32F10x_128.FLM))</FlashDriverDll> <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103RB$Flash\STM32F10x_128.FLM))</FlashDriverDll>
<DeviceId>0</DeviceId> <DeviceId>0</DeviceId>
<RegisterFile>$$Device:STM32F103RB$Device\Include\stm32f10x.h</RegisterFile> <RegisterFile>$$Device:STM32F103RB$Device\Include\stm32f10x.h</RegisterFile>
<MemoryEnv></MemoryEnv> <MemoryEnv />
<Cmp></Cmp> <Cmp />
<Asm></Asm> <Asm />
<Linker></Linker> <Linker />
<OHString></OHString> <OHString />
<InfinionOptionDll></InfinionOptionDll> <InfinionOptionDll />
<SLE66CMisc></SLE66CMisc> <SLE66CMisc />
<SLE66AMisc></SLE66AMisc> <SLE66AMisc />
<SLE66LinkerMisc></SLE66LinkerMisc> <SLE66LinkerMisc />
<SFDFile>$$Device:STM32F103RB$SVD\STM32F103xx.svd</SFDFile> <SFDFile>$$Device:STM32F103RB$SVD\STM32F103xx.svd</SFDFile>
<bCustSvd>0</bCustSvd> <bCustSvd>0</bCustSvd>
<UseEnv>0</UseEnv> <UseEnv>0</UseEnv>
<BinPath></BinPath> <BinPath />
<IncludePath></IncludePath> <IncludePath />
<LibPath></LibPath> <LibPath />
<RegisterFilePath></RegisterFilePath> <RegisterFilePath />
<DBRegisterFilePath></DBRegisterFilePath> <DBRegisterFilePath />
<TargetStatus> <TargetStatus>
<Error>0</Error> <Error>0</Error>
<ExitCodeStop>0</ExitCodeStop> <ExitCodeStop>0</ExitCodeStop>
@ -62,8 +59,8 @@
<BeforeCompile> <BeforeCompile>
<RunUserProg1>0</RunUserProg1> <RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2> <RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name> <UserProg1Name />
<UserProg2Name></UserProg2Name> <UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode> <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode> <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopU1X>0</nStopU1X> <nStopU1X>0</nStopU1X>
@ -72,8 +69,8 @@
<BeforeMake> <BeforeMake>
<RunUserProg1>0</RunUserProg1> <RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2> <RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name> <UserProg1Name />
<UserProg2Name></UserProg2Name> <UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode> <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode> <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopB1X>0</nStopB1X> <nStopB1X>0</nStopB1X>
@ -83,14 +80,14 @@
<RunUserProg1>1</RunUserProg1> <RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2> <RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name> <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name></UserProg2Name> <UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode> <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode> <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopA1X>0</nStopA1X> <nStopA1X>0</nStopA1X>
<nStopA2X>0</nStopA2X> <nStopA2X>0</nStopA2X>
</AfterMake> </AfterMake>
<SelectedForBatchBuild>0</SelectedForBatchBuild> <SelectedForBatchBuild>0</SelectedForBatchBuild>
<SVCSIdString></SVCSIdString> <SVCSIdString />
</TargetCommonOption> </TargetCommonOption>
<CommonProperty> <CommonProperty>
<UseCPPCompiler>0</UseCPPCompiler> <UseCPPCompiler>0</UseCPPCompiler>
@ -104,8 +101,8 @@
<AssembleAssemblyFile>0</AssembleAssemblyFile> <AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly> <PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode> <StopOnExitCode>3</StopOnExitCode>
<CustomArgument></CustomArgument> <CustomArgument />
<IncludeLibraryModules></IncludeLibraryModules> <IncludeLibraryModules />
<ComprImg>1</ComprImg> <ComprImg>1</ComprImg>
</CommonProperty> </CommonProperty>
<DllOption> <DllOption>
@ -114,7 +111,7 @@
<SimDlgDll>DCM.DLL</SimDlgDll> <SimDlgDll>DCM.DLL</SimDlgDll>
<SimDlgDllArguments>-pCM3</SimDlgDllArguments> <SimDlgDllArguments>-pCM3</SimDlgDllArguments>
<TargetDllName>SARMCM3.DLL</TargetDllName> <TargetDllName>SARMCM3.DLL</TargetDllName>
<TargetDllArguments></TargetDllArguments> <TargetDllArguments />
<TargetDlgDll>TCM.DLL</TargetDlgDll> <TargetDlgDll>TCM.DLL</TargetDlgDll>
<TargetDlgDllArguments>-pCM3</TargetDlgDllArguments> <TargetDlgDllArguments>-pCM3</TargetDlgDllArguments>
</DllOption> </DllOption>
@ -139,10 +136,10 @@
<bUseTDR>1</bUseTDR> <bUseTDR>1</bUseTDR>
<Flash2>BIN\UL2CM3.DLL</Flash2> <Flash2>BIN\UL2CM3.DLL</Flash2>
<Flash3>"" ()</Flash3> <Flash3>"" ()</Flash3>
<Flash4></Flash4> <Flash4 />
<pFcarmOut></pFcarmOut> <pFcarmOut />
<pFcarmGrp></pFcarmGrp> <pFcarmGrp />
<pFcArmRoot></pFcArmRoot> <pFcArmRoot />
<FcArmLst>0</FcArmLst> <FcArmLst>0</FcArmLst>
</Utilities> </Utilities>
<TargetArmAds> <TargetArmAds>
@ -175,7 +172,7 @@
<RvctClst>0</RvctClst> <RvctClst>0</RvctClst>
<GenPPlst>0</GenPPlst> <GenPPlst>0</GenPPlst>
<AdsCpuType>"Cortex-M3"</AdsCpuType> <AdsCpuType>"Cortex-M3"</AdsCpuType>
<RvctDeviceName></RvctDeviceName> <RvctDeviceName />
<mOS>0</mOS> <mOS>0</mOS>
<uocRom>0</uocRom> <uocRom>0</uocRom>
<uocRam>0</uocRam> <uocRam>0</uocRam>
@ -307,7 +304,7 @@
<Size>0x0</Size> <Size>0x0</Size>
</OCR_RVCT10> </OCR_RVCT10>
</OnChipMemories> </OnChipMemories>
<RvctStartVector></RvctStartVector> <RvctStartVector />
</ArmAdsMisc> </ArmAdsMisc>
<Cads> <Cads>
<interw>1</interw> <interw>1</interw>
@ -334,9 +331,9 @@
<v6WtE>0</v6WtE> <v6WtE>0</v6WtE>
<v6Rtti>0</v6Rtti> <v6Rtti>0</v6Rtti>
<VariousControls> <VariousControls>
<MiscControls></MiscControls> <MiscControls />
<Define>STM32F103xB, USE_HAL_DRIVER</Define> <Define>STM32F103xB, USE_HAL_DRIVER</Define>
<Undefine></Undefine> <Undefine />
<IncludePath>applications;.;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\include;..\..\..\libcpu\arm\cortex-m3;..\..\..\libcpu\arm\common;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Include;..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Inc;..\libraries\STM32F1xx_HAL\CMSIS\Include</IncludePath> <IncludePath>applications;.;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\include;..\..\..\libcpu\arm\cortex-m3;..\..\..\libcpu\arm\common;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Include;..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Inc;..\libraries\STM32F1xx_HAL\CMSIS\Include</IncludePath>
</VariousControls> </VariousControls>
</Cads> </Cads>
@ -352,10 +349,10 @@
<useXO>0</useXO> <useXO>0</useXO>
<uClangAs>0</uClangAs> <uClangAs>0</uClangAs>
<VariousControls> <VariousControls>
<MiscControls></MiscControls> <MiscControls />
<Define></Define> <Define />
<Undefine></Undefine> <Undefine />
<IncludePath></IncludePath> <IncludePath />
</VariousControls> </VariousControls>
</Aads> </Aads>
<LDads> <LDads>
@ -367,13 +364,13 @@
<useFile>0</useFile> <useFile>0</useFile>
<TextAddressRange>0x08000000</TextAddressRange> <TextAddressRange>0x08000000</TextAddressRange>
<DataAddressRange>0x20000000</DataAddressRange> <DataAddressRange>0x20000000</DataAddressRange>
<pXoBase></pXoBase> <pXoBase />
<ScatterFile>.\board\linker_scripts\link.sct</ScatterFile> <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
<IncludeLibs></IncludeLibs> <IncludeLibs />
<IncludeLibsPath></IncludeLibsPath> <IncludeLibsPath />
<Misc> --keep *.o(.rti_fn.*) --keep *.o(FSymTab)</Misc> <Misc> --keep *.o(.rti_fn.*) --keep *.o(FSymTab)</Misc>
<LinkerInputFile></LinkerInputFile> <LinkerInputFile />
<DisabledWarnings></DisabledWarnings> <DisabledWarnings />
</LDads> </LDads>
</TargetArmAds> </TargetArmAds>
</TargetOption> </TargetOption>
@ -396,26 +393,36 @@
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>board\board.c</FilePath> <FilePath>board\board.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32f1xx_hal_msp.c</FileName> <FileName>stm32f1xx_hal_msp.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>board\CubeMX_Config\Src\stm32f1xx_hal_msp.c</FilePath> <FilePath>board\CubeMX_Config\Src\stm32f1xx_hal_msp.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>startup_stm32f103xb.s</FileName> <FileName>startup_stm32f103xb.s</FileName>
<FileType>2</FileType> <FileType>2</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s</FilePath> <FilePath>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>drv_gpio.c</FileName> <FileName>drv_gpio.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath> <FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>drv_usart.c</FileName> <FileName>drv_usart.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath> <FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>drv_common.c</FileName> <FileName>drv_common.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
@ -431,76 +438,106 @@
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\clock.c</FilePath> <FilePath>..\..\..\src\clock.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>components.c</FileName> <FileName>components.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\components.c</FilePath> <FilePath>..\..\..\src\components.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>cpu.c</FileName> <FileName>cpu.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\cpu.c</FilePath> <FilePath>..\..\..\src\cpu.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>device.c</FileName> <FileName>device.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\device.c</FilePath> <FilePath>..\..\..\src\device.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>idle.c</FileName> <FileName>idle.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\idle.c</FilePath> <FilePath>..\..\..\src\idle.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>ipc.c</FileName> <FileName>ipc.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\ipc.c</FilePath> <FilePath>..\..\..\src\ipc.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>irq.c</FileName> <FileName>irq.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\irq.c</FilePath> <FilePath>..\..\..\src\irq.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>kservice.c</FileName> <FileName>kservice.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\kservice.c</FilePath> <FilePath>..\..\..\src\kservice.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>mem.c</FileName> <FileName>mem.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\mem.c</FilePath> <FilePath>..\..\..\src\mem.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>memheap.c</FileName> <FileName>memheap.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\memheap.c</FilePath> <FilePath>..\..\..\src\memheap.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>mempool.c</FileName> <FileName>mempool.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\mempool.c</FilePath> <FilePath>..\..\..\src\mempool.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>object.c</FileName> <FileName>object.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\object.c</FilePath> <FilePath>..\..\..\src\object.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>scheduler.c</FileName> <FileName>scheduler.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\scheduler.c</FilePath> <FilePath>..\..\..\src\scheduler.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>signal.c</FileName> <FileName>signal.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\signal.c</FilePath> <FilePath>..\..\..\src\signal.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>thread.c</FileName> <FileName>thread.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\thread.c</FilePath> <FilePath>..\..\..\src\thread.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>timer.c</FileName> <FileName>timer.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
@ -516,21 +553,29 @@
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\cortex-m3\cpuport.c</FilePath> <FilePath>..\..\..\libcpu\arm\cortex-m3\cpuport.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>context_rvds.S</FileName> <FileName>context_rvds.S</FileName>
<FileType>2</FileType> <FileType>2</FileType>
<FilePath>..\..\..\libcpu\arm\cortex-m3\context_rvds.S</FilePath> <FilePath>..\..\..\libcpu\arm\cortex-m3\context_rvds.S</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>backtrace.c</FileName> <FileName>backtrace.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath> <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>div0.c</FileName> <FileName>div0.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath> <FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>showmem.c</FileName> <FileName>showmem.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
@ -546,41 +591,57 @@
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\drivers\misc\pin.c</FilePath> <FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>serial.c</FileName> <FileName>serial.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\drivers\serial\serial.c</FilePath> <FilePath>..\..\..\components\drivers\serial\serial.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>completion.c</FileName> <FileName>completion.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\completion.c</FilePath> <FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>dataqueue.c</FileName> <FileName>dataqueue.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath> <FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>pipe.c</FileName> <FileName>pipe.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\pipe.c</FilePath> <FilePath>..\..\..\components\drivers\src\pipe.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>ringblk_buf.c</FileName> <FileName>ringblk_buf.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath> <FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>ringbuffer.c</FileName> <FileName>ringbuffer.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath> <FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>waitqueue.c</FileName> <FileName>waitqueue.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath> <FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>workqueue.c</FileName> <FileName>workqueue.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
@ -596,26 +657,36 @@
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\finsh\shell.c</FilePath> <FilePath>..\..\..\components\finsh\shell.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>symbol.c</FileName> <FileName>symbol.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\finsh\symbol.c</FilePath> <FilePath>..\..\..\components\finsh\symbol.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>cmd.c</FileName> <FileName>cmd.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\finsh\cmd.c</FilePath> <FilePath>..\..\..\components\finsh\cmd.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>msh.c</FileName> <FileName>msh.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\finsh\msh.c</FilePath> <FilePath>..\..\..\components\finsh\msh.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>msh_cmd.c</FileName> <FileName>msh_cmd.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\finsh\msh_cmd.c</FilePath> <FilePath>..\..\..\components\finsh\msh_cmd.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>msh_file.c</FileName> <FileName>msh_file.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
@ -631,66 +702,92 @@
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\system_stm32f1xx.c</FilePath> <FilePath>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\system_stm32f1xx.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32f1xx_hal_dma.c</FileName> <FileName>stm32f1xx_hal_dma.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_dma.c</FilePath> <FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_dma.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32f1xx_hal_cortex.c</FileName> <FileName>stm32f1xx_hal_cortex.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cortex.c</FilePath> <FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cortex.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32f1xx_hal_crc.c</FileName> <FileName>stm32f1xx_hal_crc.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_crc.c</FilePath> <FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_crc.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32f1xx_hal_pwr.c</FileName> <FileName>stm32f1xx_hal_pwr.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_pwr.c</FilePath> <FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_pwr.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32f1xx_hal_rcc.c</FileName> <FileName>stm32f1xx_hal_rcc.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc.c</FilePath> <FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32f1xx_hal_rcc_ex.c</FileName> <FileName>stm32f1xx_hal_rcc_ex.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc_ex.c</FilePath> <FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc_ex.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32f1xx_hal.c</FileName> <FileName>stm32f1xx_hal.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.c</FilePath> <FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32f1xx_hal_cec.c</FileName> <FileName>stm32f1xx_hal_cec.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cec.c</FilePath> <FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cec.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32f1xx_hal_sram.c</FileName> <FileName>stm32f1xx_hal_sram.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_sram.c</FilePath> <FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_sram.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32f1xx_hal_gpio.c</FileName> <FileName>stm32f1xx_hal_gpio.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio.c</FilePath> <FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32f1xx_hal_gpio_ex.c</FileName> <FileName>stm32f1xx_hal_gpio_ex.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio_ex.c</FilePath> <FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio_ex.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32f1xx_hal_uart.c</FileName> <FileName>stm32f1xx_hal_uart.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_uart.c</FilePath> <FilePath>..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_uart.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32f1xx_hal_usart.c</FileName> <FileName>stm32f1xx_hal_usart.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
@ -701,11 +798,9 @@
</Groups> </Groups>
</Target> </Target>
</Targets> </Targets>
<RTE> <RTE>
<apis /> <apis />
<components /> <components />
<files /> <files />
</RTE> </RTE>
</Project> </Project>

68
bsp/stm32/stm32f103-fire-arbitrary/board/Kconfig
View File

@ -9,6 +9,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (uart1)" bool "Enable USB TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1 select BSP_USING_UART1
default y default y
@ -19,6 +20,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_SPI_FLASH config BSP_USING_SPI_FLASH
bool "Enable SPI FLASH (w25q64 spi1)" bool "Enable SPI FLASH (w25q64 spi1)"
select BSP_USING_SPI
select BSP_USING_SPI1 select BSP_USING_SPI1
select RT_USING_SFUD select RT_USING_SFUD
select RT_SFUD_USING_SFDP select RT_SFUD_USING_SFDP
@ -89,44 +91,94 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN select RT_USING_PIN
default y default y
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1 config BSP_USING_UART1
bool "Enable UART1" bool "Enable UART1"
select RT_USING_SERIAL
default y default y
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default n
config BSP_USING_UART2 config BSP_USING_UART2
bool "Enable UART2" bool "Enable UART2"
select RT_USING_SERIAL default n
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n default n
config BSP_USING_UART3 config BSP_USING_UART3
bool "Enable UART3" bool "Enable UART3"
select RT_USING_SERIAL
default n default n
config BSP_UART3_RX_USING_DMA
bool "Enable UART3 RX DMA"
depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
default n
endif
config BSP_USING_ON_CHIP_FLASH config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH" bool "Enable on-chip FLASH"
default n default n
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI1 config BSP_USING_SPI1
bool "Enable SPI1 BUS" bool "Enable SPI1 BUS"
select RT_USING_SPI default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n default n
config BSP_USING_SPI2 config BSP_USING_SPI2
bool "Enable SPI2 BUS" bool "Enable SPI2 BUS"
select RT_USING_SPI default n
config BSP_SPI2_TX_USING_DMA
bool "Enable SPI2 TX DMA"
depends on BSP_USING_SPI2
default n
config BSP_SPI2_RX_USING_DMA
bool "Enable SPI2 RX DMA"
depends on BSP_USING_SPI2
select BSP_SPI2_TX_USING_DMA
default n default n
config BSP_USING_SPI3 config BSP_USING_SPI3
bool "Enable SPI3 BUS" bool "Enable SPI3 BUS"
select RT_USING_SPI
default n default n
config BSP_SPI_USING_DMA config BSP_SPI3_TX_USING_DMA
bool "Enable SPI DMA support" bool "Enable SPI3 TX DMA"
depends on BSP_USING_SPI3
default n default n
config BSP_SPI3_RX_USING_DMA
bool "Enable SPI3 RX DMA"
depends on BSP_USING_SPI3
select BSP_SPI3_TX_USING_DMA
default n
endif
menuconfig BSP_USING_I2C1 menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)" bool "Enable I2C1 BUS (software simulation)"
default n default n

54
bsp/stm32/stm32f407-atk-explorer/board/Kconfig
View File

@ -9,21 +9,25 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (uart1)" bool "Enable USB TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1 select BSP_USING_UART1
default y default y
config BSP_USING_COM2 config BSP_USING_COM2
bool "Enable COM2 (uart2 pin conflict with Ethernet and PWM)" bool "Enable COM2 (uart2 pin conflict with Ethernet and PWM)"
select BSP_USING_UART
select BSP_USING_UART2 select BSP_USING_UART2
default n default n
config BSP_USING_COM3 config BSP_USING_COM3
bool "Enable COM3 (uart3)" bool "Enable COM3 (uart3)"
select BSP_USING_UART
select BSP_USING_UART3 select BSP_USING_UART3
default n default n
config BSP_USING_SPI_FLASH config BSP_USING_SPI_FLASH
bool "Enable SPI FLASH (w25q128 spi1)" bool "Enable SPI FLASH (w25q128 spi1)"
select BSP_USING_SPI
select BSP_USING_SPI1 select BSP_USING_SPI1
select RT_USING_SFUD select RT_USING_SFUD
select RT_SFUD_USING_SFDP select RT_SFUD_USING_SFDP
@ -65,16 +69,30 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN select RT_USING_PIN
default y default y
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1 config BSP_USING_UART1
bool "Enable UART1" bool "Enable UART1"
select RT_USING_SERIAL default y
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y default y
config BSP_USING_UART3 config BSP_USING_UART3
bool "Enable UART3" bool "Enable UART3"
select RT_USING_SERIAL
default n default n
config BSP_UART3_RX_USING_DMA
bool "Enable UART3 RX DMA"
depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
default n
endif
menuconfig BSP_USING_TIM menuconfig BSP_USING_TIM
bool "Enable timer" bool "Enable timer"
default n default n
@ -112,20 +130,42 @@ menu "On-chip Peripheral Drivers"
bool "Enable on-chip FLASH" bool "Enable on-chip FLASH"
default n default n
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI1 config BSP_USING_SPI1
bool "Enable SPI1 BUS" bool "Enable SPI1 BUS"
select RT_USING_SPI default n
default y
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n
config BSP_USING_SPI2 config BSP_USING_SPI2
bool "Enable SPI2 BUS" bool "Enable SPI2 BUS"
select RT_USING_SPI
default n default n
config BSP_SPI_USING_DMA config BSP_SPI2_TX_USING_DMA
bool "Enable SPI DMA support" bool "Enable SPI2 TX DMA"
depends on BSP_USING_SPI2
default n default n
config BSP_SPI2_RX_USING_DMA
bool "Enable SPI2 RX DMA"
depends on BSP_USING_SPI2
select BSP_SPI2_TX_USING_DMA
default n
endif
menuconfig BSP_USING_ADC menuconfig BSP_USING_ADC
bool "Enable ADC" bool "Enable ADC"
default n default n

32
bsp/stm32/stm32f407-st-discovery/board/Kconfig
View File

@ -16,24 +16,42 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN select RT_USING_PIN
default y default y
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1 config BSP_USING_UART1
bool "Enable UART1" bool "Enable UART1"
select RT_USING_SERIAL
default y default y
config BSP_UART_USING_DMA_RX config BSP_UART1_RX_USING_DMA
bool "Enable UART RX DMA support" bool "Enable UART1 RX DMA"
default n depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y
endif
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI1 config BSP_USING_SPI1
bool "Enable SPI1 BUS" bool "Enable SPI1 BUS"
select RT_USING_SPI
default n default n
config BSP_SPI_USING_DMA config BSP_SPI1_TX_USING_DMA
bool "Enable SPI DMA support" bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n
endif
menuconfig BSP_USING_I2C1 menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)" bool "Enable I2C1 BUS (software simulation)"
default n default n

34
bsp/stm32/stm32f429-armfly-v6/board/Kconfig
View File

@ -9,6 +9,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_RS232_TO_USART config BSP_USING_RS232_TO_USART
bool "Enable RS232 TO USART (uart1)" bool "Enable RS232 TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1 select BSP_USING_UART1
default y default y
@ -22,6 +23,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_SPI_FLASH config BSP_USING_SPI_FLASH
bool "Enable SPI FLASH (w25q64 spi3)" bool "Enable SPI FLASH (w25q64 spi3)"
select BSP_USING_SPI
select BSP_USING_SPI3 select BSP_USING_SPI3
select RT_USING_SFUD select RT_USING_SFUD
select RT_SFUD_USING_SFDP select RT_SFUD_USING_SFDP
@ -60,28 +62,46 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN select RT_USING_PIN
default y default y
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1 config BSP_USING_UART1
bool "Enable UART1" bool "Enable UART1"
select RT_USING_SERIAL
default y default y
config BSP_UART_USING_DMA_RX config BSP_UART1_RX_USING_DMA
bool "Enable UART RX DMA support" bool "Enable UART1 RX DMA"
default n depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y
endif
config BSP_USING_ON_CHIP_FLASH config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH" bool "Enable on-chip FLASH"
default n default n
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI3 config BSP_USING_SPI3
bool "Enable SPI3 BUS" bool "Enable SPI3 BUS"
select RT_USING_SPI
default n default n
config BSP_SPI_USING_DMA config BSP_SPI3_TX_USING_DMA
bool "Enable SPI DMA support" bool "Enable SPI3 TX DMA"
depends on BSP_USING_SPI3
default n default n
config BSP_SPI3_RX_USING_DMA
bool "Enable SPI3 RX DMA"
depends on BSP_USING_SPI3
select BSP_SPI3_TX_USING_DMA
default n
endif
menuconfig BSP_USING_I2C1 menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)" bool "Enable I2C1 BUS (software simulation)"
default n default n

69
bsp/stm32/stm32f429-atk-apollo/board/Kconfig
View File

@ -9,11 +9,13 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (uart1)" bool "Enable USB TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1 select BSP_USING_UART1
default y default y
config BSP_USING_COM2 config BSP_USING_COM2
bool "Enable COM2 (uart2 pin conflict with Ethernet and PWM)" bool "Enable COM2 (uart2 pin conflict with Ethernet and PWM)"
select BSP_USING_UART
select BSP_USING_UART2 select BSP_USING_UART2
default n default n
@ -28,6 +30,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_SPI_FLASH config BSP_USING_SPI_FLASH
bool "Enable SPI FLASH (w25q256 spi5)" bool "Enable SPI FLASH (w25q256 spi5)"
select BSP_USING_SPI
select BSP_USING_SPI5 select BSP_USING_SPI5
select RT_USING_SFUD select RT_USING_SFUD
select RT_SFUD_USING_SFDP select RT_SFUD_USING_SFDP
@ -66,44 +69,94 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN select RT_USING_PIN
default y default y
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1 config BSP_USING_UART1
bool "Enable UART1" bool "Enable UART1"
select RT_USING_SERIAL default y
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y default y
config BSP_USING_UART2 config BSP_USING_UART2
bool "Enable UART2" bool "Enable UART2"
select RT_USING_SERIAL default n
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n default n
config BSP_USING_UART3 config BSP_USING_UART3
bool "Enable UART3" bool "Enable UART3"
select RT_USING_SERIAL
default n default n
config BSP_UART3_RX_USING_DMA
bool "Enable UART3 RX DMA"
depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
default n
endif
config BSP_USING_ON_CHIP_FLASH config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH" bool "Enable on-chip FLASH"
default n default n
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI1 config BSP_USING_SPI1
bool "Enable SPI1 BUS" bool "Enable SPI1 BUS"
select RT_USING_SPI default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n default n
config BSP_USING_SPI2 config BSP_USING_SPI2
bool "Enable SPI2 BUS" bool "Enable SPI2 BUS"
select RT_USING_SPI default n
config BSP_SPI2_TX_USING_DMA
bool "Enable SPI2 TX DMA"
depends on BSP_USING_SPI2
default n
config BSP_SPI2_RX_USING_DMA
bool "Enable SPI2 RX DMA"
depends on BSP_USING_SPI2
select BSP_SPI2_TX_USING_DMA
default n default n
config BSP_USING_SPI5 config BSP_USING_SPI5
bool "Enable SPI5 BUS" bool "Enable SPI5 BUS"
select RT_USING_SPI
default n default n
config BSP_SPI_USING_DMA config BSP_SPI5_TX_USING_DMA
bool "Enable SPI DMA support" bool "Enable SPI5 TX DMA"
depends on BSP_USING_SPI5
default n default n
config BSP_SPI5_RX_USING_DMA
bool "Enable SPI5 RX DMA"
depends on BSP_USING_SPI5
select BSP_SPI5_TX_USING_DMA
default n
endif
menuconfig BSP_USING_I2C1 menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)" bool "Enable I2C1 BUS (software simulation)"
default n default n

42
bsp/stm32/stm32f429-fire-challenger/board/Kconfig
View File

@ -9,11 +9,13 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (uart1)" bool "Enable USB TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1 select BSP_USING_UART1
default y default y
config BSP_USING_RS232 config BSP_USING_RS232
bool "Enable RS232" bool "Enable RS232"
select BSP_USING_UART
select BSP_USING_UART2 select BSP_USING_UART2
default n default n
@ -22,7 +24,8 @@ menu "Onboard Peripheral Drivers"
default n default n
config BSP_USING_SPI_FLASH config BSP_USING_SPI_FLASH
bool "Enable SPI FLASH (W25Q128 spi5)" bool "Enable SPI FLASH (w25q256 spi5)"
select BSP_USING_SPI
select BSP_USING_SPI5 select BSP_USING_SPI5
select RT_USING_SFUD select RT_USING_SFUD
select RT_SFUD_USING_SFDP select RT_SFUD_USING_SFDP
@ -76,29 +79,56 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN select RT_USING_PIN
default y default y
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1 config BSP_USING_UART1
bool "Enable UART1" bool "Enable UART1"
select RT_USING_SERIAL default y
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y default y
config BSP_USING_UART2 config BSP_USING_UART2
bool "Enable UART2" bool "Enable UART2"
select RT_USING_SERIAL
default n default n
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n
endif
config BSP_USING_ON_CHIP_FLASH config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH" bool "Enable on-chip FLASH"
default n default n
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI5 config BSP_USING_SPI5
bool "Enable SPI5 BUS" bool "Enable SPI5 BUS"
select RT_USING_SPI
default n default n
config BSP_SPI_USING_DMA config BSP_SPI5_TX_USING_DMA
bool "Enable SPI DMA support" bool "Enable SPI5 TX DMA"
depends on BSP_USING_SPI5
default n default n
config BSP_SPI5_RX_USING_DMA
bool "Enable SPI5 RX DMA"
depends on BSP_USING_SPI5
select BSP_SPI5_TX_USING_DMA
default n
endif
menuconfig BSP_USING_TIM menuconfig BSP_USING_TIM
bool "Enable timer" bool "Enable timer"
default n default n

57
bsp/stm32/stm32f767-atk-apollo/board/Kconfig
View File

@ -9,11 +9,13 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (uart1)" bool "Enable USB TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1 select BSP_USING_UART1
default y default y
config BSP_USING_RS232 config BSP_USING_RS232
bool "Enable RS232 (uart2 pin conflict with Ethernet)" bool "Enable RS232 (uart2 pin conflict with Ethernet)"
select BSP_USING_UART
select BSP_USING_UART2 select BSP_USING_UART2
default n default n
@ -67,29 +69,72 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN select RT_USING_PIN
default y default y
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1 config BSP_USING_UART1
bool "Enable UART1" bool "Enable UART1"
select RT_USING_SERIAL default y
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y default y
config BSP_USING_UART2 config BSP_USING_UART2
bool "Enable UART2" bool "Enable UART2"
select RT_USING_SERIAL
default n default n
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n
endif
config BSP_USING_ON_CHIP_FLASH config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH" bool "Enable on-chip FLASH"
default n default n
config BSP_USING_SPI2 menuconfig BSP_USING_SPI
bool "Enable SPI2 BUS" bool "Enable SPI BUS"
default n
select RT_USING_SPI select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
default n default n
config BSP_SPI_USING_DMA config BSP_SPI1_TX_USING_DMA
bool "Enable SPI DMA support" bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
default n
config BSP_SPI2_TX_USING_DMA
bool "Enable SPI2 TX DMA"
depends on BSP_USING_SPI2
default n
config BSP_SPI2_RX_USING_DMA
bool "Enable SPI2 RX DMA"
depends on BSP_USING_SPI2
select BSP_SPI2_TX_USING_DMA
default n
endif
config BSP_USING_QSPI config BSP_USING_QSPI
bool "Enable QSPI BUS" bool "Enable QSPI BUS"
select RT_USING_QSPI select RT_USING_QSPI

68
bsp/stm32/stm32f767-fire-challenger/board/Kconfig
View File

@ -9,11 +9,13 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (uart1)" bool "Enable USB TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1 select BSP_USING_UART1
default y default y
config BSP_USING_RS232 config BSP_USING_RS232
bool "Enable RS232 (uart2 pin conflict with Ethernet)" bool "Enable RS232 (uart2 pin conflict with Ethernet)"
select BSP_USING_UART
select BSP_USING_UART2 select BSP_USING_UART2
default n default n
@ -43,44 +45,94 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN select RT_USING_PIN
default y default y
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1 config BSP_USING_UART1
bool "Enable UART1" bool "Enable UART1"
select RT_USING_SERIAL default y
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y default y
config BSP_USING_UART2 config BSP_USING_UART2
bool "Enable UART2" bool "Enable UART2"
select RT_USING_SERIAL default n
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n default n
config BSP_USING_UART3 config BSP_USING_UART3
bool "Enable UART3" bool "Enable UART3"
select RT_USING_SERIAL
default n default n
config BSP_UART3_RX_USING_DMA
bool "Enable UART3 RX DMA"
depends on BSP_USING_UART3 && RT_SERIsAL_USING_DMA
default n
endif
config BSP_USING_ON_CHIP_FLASH config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH" bool "Enable on-chip FLASH"
default n default n
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI1 config BSP_USING_SPI1
bool "Enable SPI1 BUS" bool "Enable SPI1 BUS"
select RT_USING_SPI default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n default n
config BSP_USING_SPI2 config BSP_USING_SPI2
bool "Enable SPI2 BUS" bool "Enable SPI2 BUS"
select RT_USING_SPI default n
config BSP_SPI2_TX_USING_DMA
bool "Enable SPI2 TX DMA"
depends on BSP_USING_SPI2
default n
config BSP_SPI2_RX_USING_DMA
bool "Enable SPI2 RX DMA"
depends on BSP_USING_SPI2
select BSP_SPI2_TX_USING_DMA
default n default n
config BSP_USING_SPI5 config BSP_USING_SPI5
bool "Enable SPI5 BUS" bool "Enable SPI5 BUS"
select RT_USING_SPI
default n default n
config BSP_SPI_USING_DMA config BSP_SPI5_TX_USING_DMA
bool "Enable SPI DMA support" bool "Enable SPI5 TX DMA"
depends on BSP_USING_SPI5
default n default n
config BSP_SPI5_RX_USING_DMA
bool "Enable SPI5 RX DMA"
depends on BSP_USING_SPI5
select BSP_SPI5_TX_USING_DMA
default n
endif
config BSP_USING_QSPI config BSP_USING_QSPI
bool "Enable QSPI BUS" bool "Enable QSPI BUS"
select RT_USING_QSPI select RT_USING_QSPI

50
bsp/stm32/stm32l475-atk-pandora/board/Kconfig
View File

@ -9,6 +9,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_STLINK_TO_USART config BSP_USING_STLINK_TO_USART
bool "Enable STLINK TO USART (uart1)" bool "Enable STLINK TO USART (uart1)"
select BSP_USING_UART
select BSP_USING_UART1 select BSP_USING_UART1
default y default y
@ -21,6 +22,7 @@ menu "Onboard Peripheral Drivers"
config BSP_USING_SDCARD config BSP_USING_SDCARD
bool "Enable SDCARD (spi1)" bool "Enable SDCARD (spi1)"
select BSP_USING_SPI
select BSP_USING_SPI1 select BSP_USING_SPI1
select BSP_SPI_USING_DMA select BSP_SPI_USING_DMA
select RT_USING_SPI_MSD select RT_USING_SPI_MSD
@ -37,34 +39,70 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN select RT_USING_PIN
default y default y
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1 config BSP_USING_UART1
bool "Enable UART1" bool "Enable UART1"
select RT_USING_SERIAL default y
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default y default y
config BSP_USING_UART2 config BSP_USING_UART2
bool "Enable UART2" bool "Enable UART2"
select RT_USING_SERIAL
default n default n
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n
endif
config BSP_USING_ON_CHIP_FLASH config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH" bool "Enable on-chip FLASH"
default n default n
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI1 config BSP_USING_SPI1
bool "Enable SPI1 BUS" bool "Enable SPI1 BUS"
select RT_USING_SPI default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n default n
config BSP_USING_SPI2 config BSP_USING_SPI2
bool "Enable SPI2 BUS" bool "Enable SPI2 BUS"
select RT_USING_SPI
default n default n
config BSP_SPI_USING_DMA config BSP_SPI2_TX_USING_DMA
bool "Enable SPI DMA support" bool "Enable SPI2 TX DMA"
depends on BSP_USING_SPI2
default n default n
config BSP_SPI2_RX_USING_DMA
bool "Enable SPI2 RX DMA"
depends on BSP_USING_SPI2
select BSP_SPI2_TX_USING_DMA
default n
endif
config BSP_USING_QSPI config BSP_USING_QSPI
bool "Enable QSPI BUS" bool "Enable QSPI BUS"
select RT_USING_QSPI select RT_USING_QSPI