[bsp][pico] add rtduino

bsp/raspberry-pico/Kconfig

@@ -44,6 +44,18 @@ menu "Onboard Peripheral Drivers"
             default y
     endif
 
+    config BSP_USING_ARDUINO
+        bool "Compatible with Arduino Ecosystem (RTduino)"
+        select PKG_USING_RTDUINO
+        select BSP_USING_UART0
+        select BSP_UART0_TX_PIN_0
+        select BSP_UART0_RX_PIN_1
+        select BSP_USING_UART1
+        select BSP_UART1_TX_PIN_8
+        select BSP_UART1_RX_PIN_9
+        select BSP_USING_GPIO
+        default n
+
     config BSP_USING_ON_CHIP_FLASH
         bool "Enable On-Chip FLASH"
         select FAL_DEBUG_CONFIG

bsp/raspberry-pico/applications/SConscript

@@ -1,9 +1,12 @@
 from building import *
 import os
 
-cwd = GetCurrentDir()
+cwd     = GetCurrentDir()
-src = ['main.c']
 CPPPATH = [cwd]
+src     = Glob('*.c')
+
+if GetDepend(['PKG_USING_RTDUINO']) and not GetDepend(['RTDUINO_NO_SETUP_LOOP']):
+    src += ['arduino_main.cpp']
 
 group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
 

bsp/raspberry-pico/applications/arduino_main.cpp

@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2023-11-27     ShichengChu  first version
+ */
+
+#include <Arduino.h>
+
+void setup(void)
+{
+    /* put your setup code here, to run once: */
+    Serial.begin();
+}
+
+void loop(void)
+{
+    /* put your main code here, to run repeatedly: */
+    Serial.println("Hello Arduino!");
+    delay(800);
+}

bsp/raspberry-pico/applications/arduino_pinout/README.md

@@ -0,0 +1,54 @@
+# xxx 开发板的Arduino生态兼容说明
+
+## 1 RTduino - RT-Thread的Arduino生态兼容层
+
+xxx 开发板已经完整适配了[RTduino软件包](https://github.com/RTduino/RTduino)，即RT-Thread的Arduino生态兼容层。用户可以按照Arduino的编程习惯来操作该BSP，并且可以使用大量Arduino社区丰富的库，是对RT-Thread生态的极大增强。更多信息，请参见[RTduino软件包说明文档](https://github.com/RTduino/RTduino)。
+
+### 1.1 如何开启针对本BSP的Arduino生态兼容层
+
+Env 工具下敲入 menuconfig 命令，或者 RT-Thread Studio IDE 下选择 RT-Thread Settings：
+
+```Kconfig
+Hardware Drivers Config --->
+    Onboard Peripheral Drivers --->
+        [*] Compatible with Arduino Ecosystem (RTduino)
+```
+
+## 2 Arduino引脚排布
+
+更多引脚布局相关信息参见 [pins_arduino.c](pins_arduino.c) 和 [pins_arduino.h](pins_arduino.h)。
+
+![xxx-pinout](xxx-pinout.jpg)
+| Arduino引脚编号  | STM32引脚编号 | 5V容忍 | 备注  |
+| ------------------- | --------- | ---- | ------------------------------------------------------------------------- |
+| 0 (D0) | P | 是/否 | Serial-TX，默认被RT-Thread的UART设备框架uart1接管 |
+| 1 (D1) | P | 是/否 | Serial-RX，默认被RT-Thread的UART设备框架uart1接管 |
+| 2 (D2) | P | 是/否 |  |
+| 3 (D3) | P | 是/否 |  |
+| 4 (D4) | P | 是/否 |  |
+| 5 (D5) | P | 是/否 |  |
+| 6 (D6) | P | 是/否 |  |
+| 7 (D7) | P | 是/否 |  |
+| 8 (D8) | P | 是/否 | Serial2-TX，默认被RT-Thread的UART设备框架uart2接管 |
+| 9 (D9) | P | 是/否 | Serial2-RX，默认被RT-Thread的UART设备框架uart2接管 |
+| 10 (D10) | P | 是/否 |  |
+| 11 (D11) | P | 是/否 |  |
+| 12 (D12) | P | 是/否 |  |
+| 13 (D13) | P | 是/否 |  |
+| 14 (D14) | P | 是/否 |  |
+| 15 (D15) | P | 是/否 |  |
+| 16 (D16) | P | 是/否 |  |
+| 17 (D17) | P | 是/否 |  |
+| 18 (D18) | P | 是/否 |  |
+| 19 (D19) | P | 是/否 |  |
+| 20 (D20) | P | 是/否 |  |
+| 21 (D21) | P | 是/否 |  |
+| 22 (D22) | P | 是/否 |  |
+| 23 (D23) | P | 是/否 | 板载用户LED |
+| 24 (D24) | P | 是/否 |  |
+| 25 (D25) | P | 是/否 |  |
+
+> 注意：
+>
+> 1. xxxxxxxxx
+> 2. xxxxxxxxx

bsp/raspberry-pico/applications/arduino_pinout/SConscript

@@ -0,0 +1,9 @@
+from building import *
+
+cwd = GetCurrentDir()
+src = Glob('*.c') + Glob('*.cpp')
+inc = [cwd]
+
+group = DefineGroup('RTduino', src, depend = ['PKG_USING_RTDUINO'], CPPPATH = inc)
+
+Return('group')

bsp/raspberry-pico/applications/arduino_pinout/pins_arduino.c

@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2023-11-27     ShichengChu  first version
+ */
+
+#include <Arduino.h>
+#include <board.h>
+#include "pins_arduino.h"
+
+/*
+ * {Arduino Pin, RT-Thread Pin [, Device Name, Channel]}
+ * [] means optional
+ * Digital pins must NOT give the device name and channel.
+ * Analog pins MUST give the device name and channel(ADC, PWM or DAC).
+ * Arduino Pin must keep in sequence.
+ */
+const pin_map_t pin_map_table[]=
+{
+    {D0, 0, "uart1"},                   /* Serial-TX */
+    {D1, 1, "uart1"},                   /* Serial-RX */
+    {D2, 2},
+    {D3, 3},
+    {D4, 4},
+    {D5, 5},
+    {D6, 6},
+    {D7, 7},
+    {D8, 8, "uart2"},                   /* Serial2-TX */
+    {D9, 9, "uart2"},                   /* Serial2-RX */
+    {D10, 10},
+    {D11, 11},
+    {D12, 12},
+    {D13, 13},
+    {D14, 14},
+    {D15, 15},
+    {D16, 16},
+    {D17, 17},
+    {D18, 18},
+    {D19, 19},
+    {D20, 20},
+    {D21, 21},
+    {D22, 22},
+    {D23, 25},                          /* LED_BUILTIN */
+    {D24, 26},
+    {D25, 27},
+};

bsp/raspberry-pico/applications/arduino_pinout/pins_arduino.h

@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2023-11-27     ShichengChu  first version
+ */
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+/* pins alias. Must keep in sequence */
+#define D0        (0)
+#define D1        (1)
+#define D2        (2)
+#define D3        (3)
+#define D4        (4)
+#define D5        (5)
+#define D6        (6)
+#define D7        (7)
+#define D8        (8)
+#define D9        (9)
+#define D10       (10)
+#define D11       (11)
+#define D12       (12)
+#define D13       (13)
+#define D14       (14)
+#define D15       (15)
+#define D16       (16)
+#define D17       (17)
+#define D18       (18)
+#define D19       (19)
+#define D20       (20)
+#define D21       (21)
+#define D22       (22)
+#define D23       (23)
+#define D24       (24)
+#define D25       (25)
+
+#define F_CPU          133000000L  /* CPU:133MHz */
+
+#define LED_BUILTIN     D23  /* Default Built-in LED */
+
+/* Serial2 : P-TX  P-RX */
+#define RTDUINO_SERIAL2_DEVICE_NAME      "uart2"
+
+#endif /* Pins_Arduino_h */