add wdog driver and refine default project

bsp/nxp/mcx/mcxn/Libraries/MCXN236/SConscript

@@ -52,6 +52,7 @@ src += ['MCXN236/drivers/fsl_lpspi_edma.c']
 src += ['MCXN236/drivers/fsl_lptmr.c']
 src += ['MCXN236/drivers/fsl_lpuart.c']
 src += ['MCXN236/drivers/fsl_mrt.c']
+src += ['MCXN236/drivers/fsl_wwdt.c']
 src += ['MCXN236/drivers/fsl_reset.c']
 src += ['MCXN236/drivers/fsl_spc.c']
 src += ['MCXN236/drivers/fsl_vref.c']

bsp/nxp/mcx/mcxn/Libraries/drivers/drv_uart.c

@@ -1,12 +1,12 @@
-///*
+/*
-// * Copyright (c) 2006-2024, RT-Thread Development Team
+ * Copyright (c) 2006-2024, RT-Thread Development Team
-// *
+ *
-// * SPDX-License-Identifier: Apache-2.0
+ * SPDX-License-Identifier: Apache-2.0
-// *
+ *
-// * Change Logs:
+ * Change Logs:
-// * Date           Author       Notes
+ * Date           Author       Notes
-// * 2019-07-15     yandld      The first version for MCXN
+ * 2019-07-15     yandld      The first version for MCXN
-// */
+ */
 
 #include <rtthread.h>
 #include "drv_uart.h"

bsp/nxp/mcx/mcxn/Libraries/drivers/drv_wdt.c

@@ -0,0 +1,118 @@
+/*
+ * Copyright (c) 2006-2024, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2024-08-09     Your Name    The first version for MCXN236
+ */
+
+#include <rtthread.h>
+#include "drv_wdt.h"
+
+#include "fsl_wwdt.h"
+#include "fsl_clock.h"
+
+#ifdef RT_USING_WDT
+
+#define WDT_CLK_FREQ        CLOCK_GetWdtClkFreq(0)
+
+struct mcx_wdt
+{
+    rt_watchdog_t watchdog;
+    WWDT_Type *wdt_base;
+    clock_name_t clock_src;
+    clock_ip_name_t clock_ip_name;
+};
+
+static struct mcx_wdt wdt_dev;
+
+static rt_err_t wdt_init(rt_watchdog_t *wdt)
+{
+    uint32_t wdtFreq;
+    
+    wwdt_config_t config;
+    
+    /* The WDT divides the input frequency into it by 4 */
+    wdtFreq = WDT_CLK_FREQ / 4;
+
+    /* Enable FRO 1M clock for WWDT module. */
+    SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_FRO1MHZ_CLK_ENA_MASK;
+    
+    WWDT_GetDefaultConfig(&config);
+
+    config.timeoutValue = wdtFreq * 1;
+    config.windowValue  = wdtFreq * 1;
+
+    /* Configure WWDT to reset on timeout */
+    config.enableWatchdogReset = true;
+    
+    /* Setup watchdog clock frequency(Hz). */
+    config.clockFreq_Hz = WDT_CLK_FREQ;
+    
+    CLOCK_EnableClock(wdt_dev.clock_ip_name);
+    CLOCK_SetClkDiv(kCLOCK_DivWdt0Clk, 1U);
+    
+    WWDT_Init(wdt_dev.wdt_base, &config);
+    
+    return RT_EOK;
+}
+
+static rt_err_t wdt_control(rt_watchdog_t *wdt, int cmd, void *arg)
+{
+    switch (cmd)
+    {
+        case RT_DEVICE_CTRL_WDT_START:
+            WWDT_Enable(wdt_dev.wdt_base);
+            return RT_EOK;
+        
+        case RT_DEVICE_CTRL_WDT_STOP:
+            WWDT_Disable(wdt_dev.wdt_base);
+            return RT_EOK;
+        
+        case RT_DEVICE_CTRL_WDT_KEEPALIVE:
+            WWDT_Refresh(wdt_dev.wdt_base);
+            return RT_EOK;
+        
+        case RT_DEVICE_CTRL_WDT_SET_TIMEOUT:
+            if (arg != RT_NULL)
+            {
+                uint32_t timeout = *((uint32_t *)arg);
+                timeout = timeout * WDT_CLK_FREQ / 4;
+                WWDT_SetTimeoutValue(wdt_dev.wdt_base, timeout);
+                return RT_EOK;
+            }
+            return -RT_ERROR;
+        
+        default:
+            return -RT_ERROR;
+    }
+}
+
+static struct rt_watchdog_ops wdt_ops =
+{
+    wdt_init,
+    wdt_control,
+};
+
+int rt_hw_wdt_init(void)
+{
+    wdt_dev.wdt_base = WWDT0;
+    wdt_dev.clock_src = kCLOCK_Clk1M;
+    wdt_dev.clock_ip_name = kCLOCK_Wwdt0;
+    
+    wdt_dev.watchdog.ops = &wdt_ops;
+    
+    if (rt_hw_watchdog_register(&wdt_dev.watchdog, "wdt", RT_DEVICE_FLAG_DEACTIVATE, RT_NULL) != RT_EOK)
+    {
+        rt_kprintf("wdt register failed\n");
+        return -RT_ERROR;
+    }
+    
+    return RT_EOK;
+}
+
+INIT_BOARD_EXPORT(rt_hw_wdt_init);
+
+#endif /* RT_USING_WDT */

bsp/nxp/mcx/mcxn/Libraries/drivers/drv_wdt.h

@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2006-2024, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2024-08-09     Your Name    The first version for MCXN236
+ */
+
+#ifndef __DRV_WDT_H__
+#define __DRV_WDT_H__
+
+#include <rtthread.h>
+#include <rtdevice.h>
+
+int rt_hw_wdt_init(void);
+
+#endif /* __DRV_WDT_H__ */

bsp/nxp/mcx/mcxn/frdm-mcxn236/.config

@@ -21,7 +21,7 @@ CONFIG_RT_HOOK_USING_FUNC_PTR=y
 # CONFIG_RT_USING_HOOKLIST is not set
 CONFIG_RT_USING_IDLE_HOOK=y
 CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
-CONFIG_IDLE_THREAD_STACK_SIZE=256
+CONFIG_IDLE_THREAD_STACK_SIZE=512
 CONFIG_RT_USING_TIMER_SOFT=y
 CONFIG_RT_TIMER_THREAD_PRIO=4
 CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
@@ -163,7 +163,7 @@ CONFIG_RT_SERIAL_RB_BUFSZ=64
 # CONFIG_RT_USING_RTC is not set
 # CONFIG_RT_USING_SDIO is not set
 # CONFIG_RT_USING_SPI is not set
-# CONFIG_RT_USING_WDT is not set
+CONFIG_RT_USING_WDT=y
 # CONFIG_RT_USING_AUDIO is not set
 # CONFIG_RT_USING_SENSOR is not set
 # CONFIG_RT_USING_TOUCH is not set
@@ -1218,11 +1218,12 @@ CONFIG_BSP_USING_UART4=y
 CONFIG_BSP_USING_UART5=y
 CONFIG_BSP_USING_UART2=y
 # CONFIG_BSP_USING_I2C is not set
+# CONFIG_BSP_USING_SW_I2C is not set
 # CONFIG_BSP_USING_SPI is not set
 # CONFIG_BSP_USING_ADC is not set
 # CONFIG_BSP_USING_DAC is not set
 # CONFIG_BSP_USING_RTC is not set
-# CONFIG_BSP_USING_WDT is not set
+CONFIG_BSP_USING_WDT=y
 # CONFIG_BSP_USING_HWTIMER is not set
 # CONFIG_BSP_USING_PWM is not set
 # end of On-chip Peripheral Drivers

bsp/nxp/mcx/mcxn/frdm-mcxn236/applications/uart_sample.c

@@ -0,0 +1,109 @@
+/**
+ * @file uart_sample.c
+ * @brief UART5 interrupt-driven sample for RT-Thread on MCX N236
+ */
+
+#include <rtthread.h>
+#include <rtdevice.h>
+
+#define UART_DEVICE_NAME     "uart5"
+#define UART_THREAD_STACK    1024
+#define UART_THREAD_PRIORITY 25
+#define UART_THREAD_TIMESLICE 10
+
+static rt_device_t g_uart_device;
+static struct rt_semaphore g_rx_sem;
+
+/**
+ * @brief UART receive callback function
+ * @param dev Pointer to device
+ * @param size Size of received data
+ * @return RT_EOK
+ */
+static rt_err_t uart_rx_callback(rt_device_t dev, rt_size_t size)
+{
+    rt_sem_release(&g_rx_sem);
+    return RT_EOK;
+}
+
+/**
+ * @brief UART processing thread
+ * @param parameter Thread parameter (unused)
+ */
+static void uart_thread_entry(void *parameter)
+{
+    char ch;
+
+    while (1)
+    {
+        /* Wait for incoming data */
+        rt_sem_take(&g_rx_sem, RT_WAITING_FOREVER);
+
+        /* Read and echo back each character */
+        while (rt_device_read(g_uart_device, -1, &ch, 1) == 1)
+        {
+            rt_device_write(g_uart_device, 0, &ch, 1);
+        }
+    }
+}
+
+/**
+ * @brief Initialize and start UART sample
+ * @return RT_EOK on success, RT_ERROR otherwise
+ */
+static int uart_sample(void)
+{
+    rt_err_t result = RT_EOK;
+    rt_thread_t thread;
+
+    const char *welcome_msg = "RT-Thread MCX N236 UART5 Sample Started!\r\n";
+
+    /* Find UART device */
+    g_uart_device = rt_device_find(UART_DEVICE_NAME);
+    if (!g_uart_device)
+    {
+        rt_kprintf("Failed to find %s device!\n", UART_DEVICE_NAME);
+        return RT_ERROR;
+    }
+
+    /* Open UART device */
+    result = rt_device_open(g_uart_device, RT_DEVICE_OFLAG_RDWR | RT_DEVICE_FLAG_INT_RX);
+    if (result != RT_EOK)
+    {
+        rt_kprintf("Failed to open %s device!\n", UART_DEVICE_NAME);
+        return result;
+    }
+
+    /* Initialize receive semaphore */
+    result = rt_sem_init(&g_rx_sem, "rx_sem", 0, RT_IPC_FLAG_FIFO);
+    if (result != RT_EOK)
+    {
+        rt_kprintf("Failed to initialize receive semaphore!\n");
+        return result;
+    }
+
+    /* Set receive callback */
+    rt_device_set_rx_indicate(g_uart_device, uart_rx_callback);
+
+    /* Send welcome message */
+    rt_device_write(g_uart_device, 0, welcome_msg, rt_strlen(welcome_msg));
+
+    /* Create UART processing thread */
+    thread = rt_thread_create("uart_thread", uart_thread_entry, RT_NULL,
+                              UART_THREAD_STACK, UART_THREAD_PRIORITY, UART_THREAD_TIMESLICE);
+    if (thread != RT_NULL)
+    {
+        rt_kprintf("Starting UART processing thread...\n");
+        rt_thread_startup(thread);
+    }
+    else
+    {
+        rt_kprintf("Failed to create UART processing thread!\n");
+        result = RT_ERROR;
+    }
+
+    return result;
+}
+
+/* Export the initialization function to MSH */
+MSH_CMD_EXPORT(uart_sample, Initialize UART5 sample);

bsp/nxp/mcx/mcxn/frdm-mcxn236/applications/wdt_sample.c

@@ -0,0 +1,58 @@
+#include <rtthread.h>
+#include <rtdevice.h>
+
+#define WDT_DEVICE_NAME    "wdt"
+
+static rt_device_t wdg_dev;
+
+static void idle_hook(void)
+{
+    rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_KEEPALIVE, NULL);
+ //   rt_kprintf("feed the dog!\n ");
+}
+
+static int wdt_sample(int argc, char *argv[])
+{
+    rt_err_t ret = RT_EOK;
+    rt_uint32_t timeout = 1; 
+    char device_name[RT_NAME_MAX];
+
+
+    if (argc == 2)
+    {
+        rt_strncpy(device_name, argv[1], RT_NAME_MAX);
+    }
+    else
+    {
+        rt_strncpy(device_name, WDT_DEVICE_NAME, RT_NAME_MAX);
+    }
+
+    wdg_dev = rt_device_find(device_name);
+    if (!wdg_dev)
+    {
+        rt_kprintf("find %s failed!\n", device_name);
+        return RT_ERROR;
+    }
+
+     rt_device_init(wdg_dev);
+
+    ret = rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_SET_TIMEOUT, &timeout);
+    if (ret != RT_EOK)
+    {
+        rt_kprintf("set %s timeout failed!\n", device_name);
+        return RT_ERROR;
+    }
+
+    ret = rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_START, RT_NULL);
+    if (ret != RT_EOK)
+    {
+        rt_kprintf("start %s failed!\n", device_name);
+        return -RT_ERROR;
+    }
+
+    rt_thread_idle_sethook(idle_hook);
+
+    return ret;
+}
+
+MSH_CMD_EXPORT(wdt_sample, wdt sample);

bsp/nxp/mcx/mcxn/frdm-mcxn236/board/MCUX_Config/board/pin_mux.c

@@ -21,13 +21,13 @@ void BOARD_InitBootPins(void)
 
 
 
-    /* UART */
+    /* MCU_LINK UART */
-    PORT1->PCR[8]   = PORT_PCR_MUX(2) | PORT_PCR_PS(0) | PORT_PCR_IBE(1);     /* FC4_P0 */
+    PORT1->PCR[8]   = PORT_PCR_MUX(2) | PORT_PCR_PS(0) | PORT_PCR_IBE(1);   /* FC4_P0 */
-    PORT1->PCR[9]   = PORT_PCR_MUX(2) | PORT_PCR_PS(0) | PORT_PCR_IBE(1);     /* FC4_P1 */
+    PORT1->PCR[9]   = PORT_PCR_MUX(2) | PORT_PCR_PS(0) | PORT_PCR_IBE(1);   /* FC4_P1 */
 
     /* Mikro Bus UART */
-    PORT1->PCR[16]  = PORT_PCR_MUX(2) | PORT_PCR_PS(0) | PORT_PCR_PE(1) | PORT_PCR_IBE(1);     /* FC5_UART */
+    PORT1->PCR[16]  = PORT_PCR_MUX(2) | PORT_PCR_PS(0) | PORT_PCR_PE(1) | PORT_PCR_IBE(1);  /* FC5_P0 UART */
-    PORT1->PCR[17]  = PORT_PCR_MUX(2) | PORT_PCR_PS(0) | PORT_PCR_PE(1) | PORT_PCR_IBE(1);     /* FC5_UART */
+    PORT1->PCR[17]  = PORT_PCR_MUX(2) | PORT_PCR_PS(0) | PORT_PCR_PE(1) | PORT_PCR_IBE(1);  /* FC5_P1 UART */
 
     /* MCX_RST UART */
     PORT4->PCR[2]  = PORT_PCR_MUX(2) | PORT_PCR_PS(0) | PORT_PCR_PE(1) | PORT_PCR_IBE(1);     /* FC2_UART */

bsp/nxp/mcx/mcxn/frdm-mcxn236/board/board.c

@@ -113,7 +113,7 @@ void rt_hw_board_init()
 #endif
 
 #ifdef RT_USING_HEAP
-    rt_kprintf("sram heap, begin: 0x%p, end: 0x%p\n", HEAP_BEGIN, HEAP_END);
+    rt_kprintf("sram heap, begin: %p, end: %p\n", HEAP_BEGIN, HEAP_END);
     rt_system_heap_init((void *)HEAP_BEGIN, (void *)(HEAP_END));
 #endif
 }

bsp/nxp/mcx/mcxn/frdm-mcxn236/rtconfig.h

@@ -15,7 +15,7 @@
 #define RT_HOOK_USING_FUNC_PTR
 #define RT_USING_IDLE_HOOK
 #define RT_IDLE_HOOK_LIST_SIZE 4
-#define IDLE_THREAD_STACK_SIZE 256
+#define IDLE_THREAD_STACK_SIZE 512
 #define RT_USING_TIMER_SOFT
 #define RT_TIMER_THREAD_PRIO 4
 #define RT_TIMER_THREAD_STACK_SIZE 512
@@ -97,6 +97,7 @@
 #define RT_USING_SERIAL_V1
 #define RT_SERIAL_USING_DMA
 #define RT_SERIAL_RB_BUFSZ 64
+#define RT_USING_WDT
 #define RT_USING_PIN
 #define RT_USING_HWTIMER
 /* end of Device Drivers */
@@ -355,6 +356,7 @@
 #define BSP_USING_UART4
 #define BSP_USING_UART5
 #define BSP_USING_UART2
+#define BSP_USING_WDT
 /* end of On-chip Peripheral Drivers */
 
 /* Board extended module Drivers */