[修改]: stm32f429-apollo 3.0 修改。

bsp/stm32f429-apollo/.config

@@ -26,6 +26,7 @@ CONFIG_RT_USING_MUTEX=y
 CONFIG_RT_USING_EVENT=y
 CONFIG_RT_USING_MAILBOX=y
 CONFIG_RT_USING_MESSAGEQUEUE=y
+# CONFIG_RT_USING_SIGNALS is not set
 
 #
 # Memory Management
@@ -60,33 +61,33 @@ CONFIG_RT_USING_COMPONENTS_INIT=y
 # Command shell
 #
 CONFIG_RT_USING_FINSH=y
+CONFIG_FINSH_USING_HISTORY=y
 CONFIG_FINSH_USING_SYMTAB=y
 CONFIG_FINSH_USING_DESCRIPTION=y
+CONFIG_FINSH_THREAD_PRIORITY=20
 CONFIG_FINSH_THREAD_STACK_SIZE=2048
+CONFIG_FINSH_CMD_SIZE=80
 # CONFIG_FINSH_USING_AUTH is not set
-CONFIG_FINSH_DEFAULT_PASSWORD="rtthread"
 # CONFIG_FINSH_USING_MSH is not set
-# CONFIG_FINSH_USING_MSH_DEFAULT is not set
-# CONFIG_FINSH_USING_MSH_ONLY is not set
 
 #
 # Device virtual file system
 #
 CONFIG_RT_USING_DFS=y
-# CONFIG_DFS_USING_WORKDIR is not set
-CONFIG_DFS_FILESYSTEMS_MAX=4
-CONFIG_DFS_FD_MAX=16
+CONFIG_DFS_USING_WORKDIR=y
+CONFIG_DFS_FILESYSTEMS_MAX=2
+CONFIG_DFS_FD_MAX=4
 CONFIG_RT_USING_DFS_ELMFAT=y
 CONFIG_RT_DFS_ELM_CODE_PAGE=437
 CONFIG_RT_DFS_ELM_WORD_ACCESS=y
-# CONFIG_RT_DFS_ELM_USE_LFN_0 is not set
+CONFIG_RT_DFS_ELM_USE_LFN_0=y
 # CONFIG_RT_DFS_ELM_USE_LFN_1 is not set
 # CONFIG_RT_DFS_ELM_USE_LFN_2 is not set
-CONFIG_RT_DFS_ELM_USE_LFN_3=y
-CONFIG_RT_DFS_ELM_USE_LFN=3
+# CONFIG_RT_DFS_ELM_USE_LFN_3 is not set
+CONFIG_RT_DFS_ELM_USE_LFN=0
 CONFIG_RT_DFS_ELM_MAX_LFN=255
 CONFIG_RT_DFS_ELM_DRIVES=2
-CONFIG_RT_DFS_ELM_MAX_SECTOR_SIZE=4096
+CONFIG_RT_DFS_ELM_MAX_SECTOR_SIZE=512
 # CONFIG_RT_DFS_ELM_USE_ERASE is not set
 CONFIG_RT_DFS_ELM_REENTRANT=y
 CONFIG_RT_USING_DFS_DEVFS=y
@@ -105,27 +106,20 @@ CONFIG_RT_USING_I2C_BITOPS=y
 # CONFIG_RT_USING_PIN is not set
 # CONFIG_RT_USING_MTD_NOR is not set
 CONFIG_RT_USING_MTD_NAND=y
-CONFIG_RT_MTD_NAND_DEBUG=y
+# CONFIG_RT_MTD_NAND_DEBUG is not set
 CONFIG_RT_USING_RTC=y
-CONFIG_RT_USING_SDIO=y
-CONFIG_RT_USING_SPI=y
-CONFIG_RT_USING_SFUD=y
-CONFIG_RT_SFUD_USING_SFDP=y
-CONFIG_RT_SFUD_USING_FLASH_INFO_TABLE=y
-CONFIG_RT_SFUD_DEBUG=y
-# CONFIG_RT_USING_W25QXX is not set
-# CONFIG_RT_USING_GD is not set
-# CONFIG_RT_USING_ENC28J60 is not set
-# CONFIG_RT_USING_SPI_WIFI is not set
+# CONFIG_RT_USING_SDIO is not set
+# CONFIG_RT_USING_SPI is not set
 # CONFIG_RT_USING_WDT is not set
 # CONFIG_RT_USING_USB_HOST is not set
 # CONFIG_RT_USING_USB_DEVICE is not set
 
 #
-# libc
+# POSIX layer and C standard library
 #
 CONFIG_RT_USING_LIBC=y
 # CONFIG_RT_USING_PTHREADS is not set
+# CONFIG_RT_USING_POSIX is not set
 
 #
 # Network stack
@@ -134,47 +128,99 @@ CONFIG_RT_USING_LIBC=y
 #
 # light weight TCP/IP stack
 #
-# CONFIG_RT_USING_LWIP is not set
+CONFIG_RT_USING_LWIP=y
+CONFIG_RT_USING_LWIP141=y
+# CONFIG_RT_USING_LWIP202 is not set
+# CONFIG_RT_LWIP_IGMP is not set
+CONFIG_RT_LWIP_ICMP=y
+# CONFIG_RT_LWIP_SNMP is not set
+CONFIG_RT_LWIP_DNS=y
+CONFIG_RT_LWIP_DHCP=y
+CONFIG_IP_SOF_BROADCAST=1
+CONFIG_IP_SOF_BROADCAST_RECV=1
+CONFIG_LWIP_USING_DHCPD=y
+CONFIG_RT_LWIP_UDP=y
+CONFIG_RT_LWIP_TCP=y
+# CONFIG_RT_LWIP_RAW is not set
+# CONFIG_RT_LWIP_PPP is not set
+# CONFIG_RT_LWIP_PPPOE is not set
+# CONFIG_RT_LWIP_PPPOS is not set
+CONFIG_RT_LWIP_PBUF_NUM=16
+CONFIG_RT_LWIP_RAW_PCB_NUM=4
+CONFIG_RT_LWIP_UDP_PCB_NUM=4
+CONFIG_RT_LWIP_TCP_PCB_NUM=4
+CONFIG_RT_LWIP_TCP_SEG_NUM=40
+CONFIG_RT_LWIP_TCP_SND_BUF=8196
+CONFIG_RT_LWIP_TCP_WND=8196
+CONFIG_RT_LWIP_TCPTHREAD_PRIORITY=10
+CONFIG_RT_LWIP_TCPTHREAD_MBOX_SIZE=8
+CONFIG_RT_LWIP_TCPTHREAD_STACKSIZE=1024
+CONFIG_RT_LWIP_ETHTHREAD_PRIORITY=12
+CONFIG_RT_LWIP_ETHTHREAD_STACKSIZE=1024
+CONFIG_RT_LWIP_ETHTHREAD_MBOX_SIZE=8
+# CONFIG_RT_LWIP_REASSEMBLY_FRAG is not set
+CONFIG_LWIP_NETIF_STATUS_CALLBACK=1
+CONFIG_SO_REUSE=1
+CONFIG_LWIP_SO_RCVTIMEO=1
+CONFIG_LWIP_SO_SNDTIMEO=1
+CONFIG_LWIP_SO_RCVBUF=1
 
 #
 # Modbus master and slave stack
 #
 # CONFIG_RT_USING_MODBUS is not set
+# CONFIG_RT_USING_NETUTILS is not set
+
+#
+# RT-Thread UI Engine
+#
+# CONFIG_RT_USING_GUIENGINE is not set
 
 #
 # RT-Thread online packages
 #
 
+#
+# system packages
+#
+# CONFIG_PKG_USING_PARTITION is not set
+# CONFIG_PKG_USING_SQLITE is not set
+
 #
 # IoT - internet of things
 #
 # CONFIG_PKG_USING_CJSON is not set
-# CONFIG_PKG_USING_PAHOMQTT is not set
+CONFIG_PKG_USING_PAHOMQTT=y
+CONFIG_PKG_PAHOMQTT_PATH="/packages/iot/pahomqtt"
+CONFIG_PKG_PAHOMQTT_VER="v1.0.0"
 # CONFIG_PKG_USING_WEBCLIENT is not set
+# CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_WEBTERMINAL is not set
+
+#
+# security packages
+#
+# CONFIG_PKG_USING_MBEDTLS is not set
 
 #
 # language packages
 #
 # CONFIG_PKG_USING_JERRYSCRIPT is not set
 
-#
-# miscellaneous packages
-#
-# CONFIG_PKG_USING_HELLO is not set
-
 #
 # multimedia packages
 #
 
 #
-# security packages
-#
-
-#
-# system packages
+# tools packages
 #
 # CONFIG_PKG_USING_CMBACKTRACE is not set
-# CONFIG_PKG_USING_PARTITION is not set
+# CONFIG_PKG_USING_EASYLOGGER is not set
+
+#
+# miscellaneous packages
+#
+# CONFIG_PKG_USING_HELLO is not set
 
 #
 # BSP_SPECIAL CONFIG
@@ -185,3 +231,22 @@ CONFIG_RT_USING_UART1=y
 CONFIG_RT_USING_UART2=y
 CONFIG_RT_USING_UART3=y
 CONFIG_RT_USING_SPI5=y
+
+#
+# BSP_LWIP CONFIG
+#
+CONFIG_RT_LWIP_IPADDR0=192
+CONFIG_RT_LWIP_IPADDR1=168
+CONFIG_RT_LWIP_IPADDR2=1
+CONFIG_RT_LWIP_IPADDR3=201
+CONFIG_RT_LWIP_GWADDR0=192
+CONFIG_RT_LWIP_GWADDR1=168
+CONFIG_RT_LWIP_GWADDR2=1
+CONFIG_RT_LWIP_GWADDR3=1
+CONFIG_RT_LWIP_MSKADDR0=255
+CONFIG_RT_LWIP_MSKADDR1=255
+CONFIG_RT_LWIP_MSKADDR2=255
+CONFIG_RT_LWIP_MSKADDR3=0
+CONFIG_CHECKSUM_CHECK_TCP=0
+CONFIG_CHECKSUM_CHECK_IP=0
+CONFIG_CHECKSUM_CHECK_UDP=0

bsp/stm32f429-apollo/KConfig

@@ -46,6 +46,70 @@ config RT_USING_SPI5
           
 endmenu
 
+menu "BSP_LWIP CONFIG"
+
+config RT_LWIP_IPADDR0
+    int "RT_LWIP_IPADDR0"
+    default 192 
+    
+config RT_LWIP_IPADDR1
+    int "RT_LWIP_IPADDR1"
+    default 168 
+    
+config RT_LWIP_IPADDR2
+    int "RT_LWIP_IPADDR2"
+    default 1 
+    
+config RT_LWIP_IPADDR3
+    int "RT_LWIP_IPADDR3"
+    default 201 
+    
+config RT_LWIP_GWADDR0
+    int "RT_LWIP_GWADDR0"
+    default 192 
+    
+config RT_LWIP_GWADDR1
+    int "RT_LWIP_GWADDR1"
+    default 168 
+    
+config RT_LWIP_GWADDR2
+    int "RT_LWIP_GWADDR2"
+    default 1 
+    
+config RT_LWIP_GWADDR3
+    int "RT_LWIP_GWADDR3"
+    default 1 
+
+config RT_LWIP_MSKADDR0
+    int "RT_LWIP_MSKADDR0"
+    default 255 
+    
+config RT_LWIP_MSKADDR1
+    int "RT_LWIP_MSKADDR1"
+    default 255 
+    
+config RT_LWIP_MSKADDR2
+    int "RT_LWIP_MSKADDR2"
+    default 255 
+    
+config RT_LWIP_MSKADDR3
+    int "RT_LWIP_MSKADDR3"
+    default 0 
+    
+config CHECKSUM_CHECK_TCP
+    int "CHECKSUM_CHECK_TCP"
+    default 0 
+    
+config CHECKSUM_CHECK_IP
+    int "The CHECKSUM_CHECK_IP"
+    default 0 
+    
+config CHECKSUM_CHECK_UDP
+    int "The CHECKSUM_CHECK_UDP"
+    default 0 
+    
+endmenu
+
 
 
     

bsp/stm32f429-apollo/applications/application.c

@@ -20,7 +20,7 @@
 #include "time.h"
 #ifdef RT_USING_DFS
 /* dfs init */
-#include <dfs_init.h>
+
 /* dfs filesystem:ELM filesystem init */
 #include <dfs_elm.h>
 /* dfs Filesystem APIs */

bsp/stm32f429-apollo/drivers/drv_eth.c

@@ -117,6 +117,17 @@ void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth)
 {
     rt_kprintf("eth err\n");
 }
+static void delay_ms(rt_uint32_t ms)
+{
+	if (ms < 1000 / RT_TICK_PER_SECOND) 
+	{
+		rt_thread_delay(1);
+	} 
+	else 
+	{
+		rt_thread_delay(ms/(1000 / RT_TICK_PER_SECOND));
+	}
+}
 
 static void phy_pin_reset(void)
 {

bsp/stm32f429-apollo/rtconfig.h

@@ -25,6 +25,7 @@
 #define RT_USING_EVENT
 #define RT_USING_MAILBOX
 #define RT_USING_MESSAGEQUEUE
+/* RT_USING_SIGNALS is not set */
 
 /* Memory Management */
 
@@ -54,32 +55,32 @@
 /* Command shell */
 
 #define RT_USING_FINSH
+#define FINSH_USING_HISTORY
 #define FINSH_USING_SYMTAB
 #define FINSH_USING_DESCRIPTION
+#define FINSH_THREAD_PRIORITY 20
 #define FINSH_THREAD_STACK_SIZE 2048
+#define FINSH_CMD_SIZE 80
 /* FINSH_USING_AUTH is not set */
-#define FINSH_DEFAULT_PASSWORD "rtthread"
 /* FINSH_USING_MSH is not set */
-/* FINSH_USING_MSH_DEFAULT is not set */
-/* FINSH_USING_MSH_ONLY is not set */
 
 /* Device virtual file system */
 
 #define RT_USING_DFS
-/* DFS_USING_WORKDIR is not set */
-#define DFS_FILESYSTEMS_MAX 4
-#define DFS_FD_MAX 16
+#define DFS_USING_WORKDIR
+#define DFS_FILESYSTEMS_MAX 2
+#define DFS_FD_MAX 4
 #define RT_USING_DFS_ELMFAT
 #define RT_DFS_ELM_CODE_PAGE 437
 #define RT_DFS_ELM_WORD_ACCESS
-/* RT_DFS_ELM_USE_LFN_0 is not set */
+#define RT_DFS_ELM_USE_LFN_0
 /* RT_DFS_ELM_USE_LFN_1 is not set */
 /* RT_DFS_ELM_USE_LFN_2 is not set */
-#define RT_DFS_ELM_USE_LFN_3
-#define RT_DFS_ELM_USE_LFN 3
+/* RT_DFS_ELM_USE_LFN_3 is not set */
+#define RT_DFS_ELM_USE_LFN 0
 #define RT_DFS_ELM_MAX_LFN 255
 #define RT_DFS_ELM_DRIVES 2
-#define RT_DFS_ELM_MAX_SECTOR_SIZE 4096
+#define RT_DFS_ELM_MAX_SECTOR_SIZE 512
 /* RT_DFS_ELM_USE_ERASE is not set */
 #define RT_DFS_ELM_REENTRANT
 #define RT_USING_DFS_DEVFS
@@ -97,62 +98,104 @@
 /* RT_USING_PIN is not set */
 /* RT_USING_MTD_NOR is not set */
 #define RT_USING_MTD_NAND
-#define RT_MTD_NAND_DEBUG
+/* RT_MTD_NAND_DEBUG is not set */
 #define RT_USING_RTC
-#define RT_USING_SDIO
-#define RT_USING_SPI
-#define RT_USING_SFUD
-#define RT_SFUD_USING_SFDP
-#define RT_SFUD_USING_FLASH_INFO_TABLE
-#define RT_SFUD_DEBUG
-/* RT_USING_W25QXX is not set */
-/* RT_USING_GD is not set */
-/* RT_USING_ENC28J60 is not set */
-/* RT_USING_SPI_WIFI is not set */
+/* RT_USING_SDIO is not set */
+/* RT_USING_SPI is not set */
 /* RT_USING_WDT is not set */
 /* RT_USING_USB_HOST is not set */
 /* RT_USING_USB_DEVICE is not set */
 
-/* libc */
+/* POSIX layer and C standard library */
 
 #define RT_USING_LIBC
 /* RT_USING_PTHREADS is not set */
+/* RT_USING_POSIX is not set */
 
 /* Network stack */
 
 /* light weight TCP/IP stack */
 
-/* RT_USING_LWIP is not set */
+#define RT_USING_LWIP
+#define RT_USING_LWIP141
+/* RT_USING_LWIP202 is not set */
+/* RT_LWIP_IGMP is not set */
+#define RT_LWIP_ICMP
+/* RT_LWIP_SNMP is not set */
+#define RT_LWIP_DNS
+#define RT_LWIP_DHCP
+#define IP_SOF_BROADCAST 1
+#define IP_SOF_BROADCAST_RECV 1
+#define LWIP_USING_DHCPD
+#define RT_LWIP_UDP
+#define RT_LWIP_TCP
+/* RT_LWIP_RAW is not set */
+/* RT_LWIP_PPP is not set */
+/* RT_LWIP_PPPOE is not set */
+/* RT_LWIP_PPPOS is not set */
+#define RT_LWIP_PBUF_NUM 16
+#define RT_LWIP_RAW_PCB_NUM 4
+#define RT_LWIP_UDP_PCB_NUM 4
+#define RT_LWIP_TCP_PCB_NUM 4
+#define RT_LWIP_TCP_SEG_NUM 40
+#define RT_LWIP_TCP_SND_BUF 8196
+#define RT_LWIP_TCP_WND 8196
+#define RT_LWIP_TCPTHREAD_PRIORITY 10
+#define RT_LWIP_TCPTHREAD_MBOX_SIZE 8
+#define RT_LWIP_TCPTHREAD_STACKSIZE 1024
+#define RT_LWIP_ETHTHREAD_PRIORITY 12
+#define RT_LWIP_ETHTHREAD_STACKSIZE 1024
+#define RT_LWIP_ETHTHREAD_MBOX_SIZE 8
+/* RT_LWIP_REASSEMBLY_FRAG is not set */
+#define LWIP_NETIF_STATUS_CALLBACK 1
+#define SO_REUSE 1
+#define LWIP_SO_RCVTIMEO 1
+#define LWIP_SO_SNDTIMEO 1
+#define LWIP_SO_RCVBUF 1
 
 /* Modbus master and slave stack */
 
 /* RT_USING_MODBUS is not set */
+/* RT_USING_NETUTILS is not set */
+
+/* RT-Thread UI Engine */
+
+/* RT_USING_GUIENGINE is not set */
 
 /* RT-Thread online packages */
 
+/* system packages */
+
+/* PKG_USING_PARTITION is not set */
+/* PKG_USING_SQLITE is not set */
+
 /* IoT - internet of things */
 
 /* PKG_USING_CJSON is not set */
-/* PKG_USING_PAHOMQTT is not set */
+#define PKG_USING_PAHOMQTT
 /* PKG_USING_WEBCLIENT is not set */
+/* PKG_USING_MONGOOSE is not set */
+/* PKG_USING_WEBTERMINAL is not set */
+
+/* security packages */
+
+/* PKG_USING_MBEDTLS is not set */
 
 /* language packages */
 
 /* PKG_USING_JERRYSCRIPT is not set */
 
+/* multimedia packages */
+
+/* tools packages */
+
+/* PKG_USING_CMBACKTRACE is not set */
+/* PKG_USING_EASYLOGGER is not set */
+
 /* miscellaneous packages */
 
 /* PKG_USING_HELLO is not set */
 
-/* multimedia packages */
-
-/* security packages */
-
-/* system packages */
-
-/* PKG_USING_CMBACKTRACE is not set */
-/* PKG_USING_PARTITION is not set */
-
 /* BSP_SPECIAL CONFIG */
 
 #define RT_RTC_NAME "rtc"
@@ -162,4 +205,22 @@
 #define RT_USING_UART3
 #define RT_USING_SPI5
 
+/* BSP_LWIP CONFIG */
+
+#define RT_LWIP_IPADDR0 192
+#define RT_LWIP_IPADDR1 168
+#define RT_LWIP_IPADDR2 1
+#define RT_LWIP_IPADDR3 201
+#define RT_LWIP_GWADDR0 192
+#define RT_LWIP_GWADDR1 168
+#define RT_LWIP_GWADDR2 1
+#define RT_LWIP_GWADDR3 1
+#define RT_LWIP_MSKADDR0 255
+#define RT_LWIP_MSKADDR1 255
+#define RT_LWIP_MSKADDR2 255
+#define RT_LWIP_MSKADDR3 0
+#define CHECKSUM_CHECK_TCP 0
+#define CHECKSUM_CHECK_IP 0
+#define CHECKSUM_CHECK_UDP 0
+
 #endif

bsp/stm32f429-apollo/rtconfig.py

@@ -1,4 +1,5 @@
 import os
+import scons_config
 
 # toolchains options
 ARCH='arm'