libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity

[ht32][drv]新增adc、wdt、soft_i2c驱动

This commit is contained in:
QTbin 2024-06-19 23:00:12 +08:00 committed by GitHub
parent 3b1ce1e4b6
commit 6bd6317f77
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
30 changed files with 3818 additions and 480 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

42
bsp/ht32/ht32f12366/.config
View File

@ -76,7 +76,7 @@ CONFIG_RT_USING_DEVICE=y
CONFIG_RT_USING_CONSOLE=y
CONFIG_RT_CONSOLEBUF_SIZE=128
CONFIG_RT_CONSOLE_DEVICE_NAME="usart0"
CONFIG_RT_VER_NUM=0x50100
CONFIG_RT_VER_NUM=0x50200
# CONFIG_RT_USING_STDC_ATOMIC is not set
CONFIG_RT_BACKTRACE_LEVEL_MAX_NR=32
# CONFIG_RT_USING_CACHE is not set
@ -139,7 +139,7 @@ CONFIG_RT_USING_I2C_BITOPS=y
# CONFIG_RT_I2C_BITOPS_DEBUG is not set
# CONFIG_RT_USING_SOFT_I2C is not set
# CONFIG_RT_USING_PHY is not set
# CONFIG_RT_USING_ADC is not set
CONFIG_RT_USING_ADC=y
# CONFIG_RT_USING_DAC is not set
# CONFIG_RT_USING_NULL is not set
# CONFIG_RT_USING_ZERO is not set
@ -157,7 +157,7 @@ CONFIG_RT_USING_SPI=y
# CONFIG_RT_USING_SFUD is not set
# CONFIG_RT_USING_ENC28J60 is not set
# CONFIG_RT_USING_SPI_WIFI is not set
# CONFIG_RT_USING_WDT is not set
CONFIG_RT_USING_WDT=y
# CONFIG_RT_USING_AUDIO is not set
# CONFIG_RT_USING_SENSOR is not set
# CONFIG_RT_USING_TOUCH is not set
@ -269,6 +269,7 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
# CONFIG_PKG_USING_WEBTERMINAL is not set
# CONFIG_PKG_USING_FREEMODBUS is not set
# CONFIG_PKG_USING_NANOPB is not set
# CONFIG_PKG_USING_WIFI_HOST_DRIVER is not set
#
# Wi-Fi
@ -363,6 +364,7 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
# CONFIG_PKG_USING_ZEPHYR_POLLING is not set
# CONFIG_PKG_USING_MATTER_ADAPTATION_LAYER is not set
# CONFIG_PKG_USING_LHC_MODBUS is not set
# CONFIG_PKG_USING_QMODBUS is not set
#
# security packages
@ -496,6 +498,7 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set
# CONFIG_PKG_USING_RT_VSNPRINTF_FULL is not set
# CONFIG_PKG_USING_AUNITY is not set
#
# acceleration: Assembly language or algorithmic acceleration packages
@ -582,9 +585,24 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
#
# STM32 HAL & SDK Drivers
#
# CONFIG_PKG_USING_STM32L4XX_HAL_DRIVER is not set
# CONFIG_PKG_USING_STM32L4_HAL_DRIVER is not set
# CONFIG_PKG_USING_STM32L4_CMSIS_DRIVER is not set
# CONFIG_PKG_USING_STM32WB55_SDK is not set
# CONFIG_PKG_USING_STM32_SDIO is not set
#
# Infineon HAL Packages
#
# CONFIG_PKG_USING_INFINEON_CAT1CM0P is not set
# CONFIG_PKG_USING_INFINEON_CMSIS is not set
# CONFIG_PKG_USING_INFINEON_CORE_LIB is not set
# CONFIG_PKG_USING_INFINEON_MTB_HAL_CAT1 is not set
# CONFIG_PKG_USING_INFINEON_MTB_PDL_CAT1 is not set
# CONFIG_PKG_USING_INFINEON_RETARGET_IO is not set
# CONFIG_PKG_USING_INFINEON_CAPSENSE is not set
# CONFIG_PKG_USING_INFINEON_CSDIDAC is not set
# CONFIG_PKG_USING_INFINEON_SERIAL_FLASH is not set
# CONFIG_PKG_USING_INFINEON_USBDEV is not set
# CONFIG_PKG_USING_BLUETRUM_SDK is not set
# CONFIG_PKG_USING_EMBARC_BSP is not set
# CONFIG_PKG_USING_ESP_IDF is not set
@ -771,6 +789,7 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
#
# Signal Processing and Control Algorithm Packages
#
# CONFIG_PKG_USING_APID is not set
# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
# CONFIG_PKG_USING_QPID is not set
# CONFIG_PKG_USING_UKAL is not set
@ -1072,11 +1091,23 @@ CONFIG_SOC_SERIES_HT32F1=y
#
# Hardware Drivers Config
#
#
# Chip Configuration
#
CONFIG_SOC_KERNEL=y
# CONFIG_CORTEX_M0 is not set
CONFIG_CORTEX_M3=y
# CONFIG_SOC_HT32F1654 is not set
# CONFIG_SOC_HT32F1656 is not set
# CONFIG_SOC_HT32F12345 is not set
# CONFIG_SOC_HT32F12364 is not set
CONFIG_SOC_HT32F12366=y
#
# Onboard Peripheral Drivers
#
# CONFIG_BSP_USING_TEST is not set
#
# On-chip Peripheral Drivers
@ -1084,11 +1115,14 @@ CONFIG_SOC_HT32F12366=y
CONFIG_BSP_USING_GPIO=y
CONFIG_BSP_USING_UART=y
CONFIG_BSP_USING_USART0=y
CONFIG_BSP_USING_USART0_NAME="usart0"
# CONFIG_BSP_USING_USART1 is not set
# CONFIG_BSP_USING_UART0 is not set
# CONFIG_BSP_USING_UART1 is not set
# CONFIG_BSP_USING_SPI is not set
# CONFIG_BSP_USING_I2C is not set
# CONFIG_BSP_USING_ADC is not set
# CONFIG_BSP_USING_WDT is not set
#
# Board extended module Drivers

7
bsp/ht32/ht32f12366/applications/SConscript
View File

@ -9,7 +9,12 @@ from building import *
cwd = GetCurrentDir()
#创建一个列表，用于保存需要使用到的C文件路径
src = Glob('*c')
#src = Glob('*.c')
src = Split("""
main.c
""")
if GetDepend(['BSP_USING_TEST']):
src += ['test.c']
#创建一个列表，用于保存需要包含的H文件路径
path = [cwd]

716
bsp/ht32/ht32f12366/applications/test.c Normal file
View File

@ -0,0 +1,716 @@
/*
* Copyright (c) 2006-2024, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2024-06-17 QT-one first version
*/
#include "board.h"
#ifdef BSP_USING_TEST
/* Task stack */
#define THREAD_PRIORITY 25
#define THREAD_STACK_SIZE 512
#define THREAD_TIMESLICE 5
/* Test pins */
#define TEST_LED0_PIN GET_PIN(D, 15)
#define TEST_LED1_PIN GET_PIN(E, 0)
#define TEST_LED2_PIN GET_PIN(E, 2)
#define TEST_WAKEUP_PIN GET_PIN(C, 15)
#define TEST_KEY1_PIN GET_PIN(D, 13)
#define TEST_KEY2_PIN GET_PIN(D, 14)
#define TEST_OTHER_PIN GET_PIN(C, 15)
#define TEST_OUTPUT_PIN GET_PIN(E, 2)
#define TEST_INPUT_PIN GET_PIN(D, 13)
#define TEST_INT_PIN GET_PIN(D, 14)
#define TEST_RES_PIN GET_PIN(E, 2)
/* Event flags */
#define TEST_GPIO_INT_ENV (1 << 10)
#define TEST_GPIO_KEY_ENV (1 << 15)
static struct rt_event led_event; /* LED event */
#define TASK_KILL_FLAG (1 << 10)
static struct rt_event task_event; /* Task event */
/* EEPROM Read/Write Data Structure */
typedef union
{
rt_uint8_t data[30];
struct
{
rt_uint8_t write_addr;
char write_date[29];
}in_data;
}eeprom_write_type;
/* Semaphore variables */
static struct rt_semaphore rx_sem;
/* Mutually exclusive variables */
static rt_mutex_t task_mutex = RT_NULL; /* task mutex */
/* device handle */
static rt_device_t serial;
static rt_device_t wdt_dev;
struct rt_i2c_bus_device *i2c_dev;
static struct rt_spi_device *spi_dev;
/* In-file function declarations */
static void sys_run_dir(void *parameter);
static void gpio_output_test(void *parameter);
static void gpio_input_test(void *parameter);
static void key_iqr_handle(void *args);
/* Task registration */
int task_registration(void)
{
/* Create a dynamic mutex */
task_mutex = rt_mutex_create("task_mutex", RT_IPC_FLAG_FIFO);
if (task_mutex == RT_NULL)
{
rt_kprintf("rt_mutex_create error.\n");
return -1;
}
/* Create a task event */
if(rt_event_init(&task_event,"task_event",RT_IPC_FLAG_FIFO) != RT_EOK)
{
rt_kprintf("rt_mutex_create error.\n");
return -1;
}
return 0;
}
INIT_BOARD_EXPORT(task_registration);
/* System operation indicator */
static void sys_run_dir(void *parameter)
{
rt_uint32_t e;
rt_pin_mode(TEST_LED2_PIN, PIN_MODE_OUTPUT);
while(1)
{
if(rt_event_recv(&task_event,TASK_KILL_FLAG,
RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR,
RT_WAITING_NO, &e) == RT_EOK)
{
rt_thread_t tid = rt_thread_self();
rt_thread_delete(tid);
}
rt_pin_write(TEST_LED2_PIN, PIN_LOW);
rt_thread_mdelay(500);
rt_pin_write(TEST_LED2_PIN, PIN_HIGH);
rt_thread_mdelay(500);
}
}
static int sys_run_task(int argc, char *argv[])
{
if(argc == 2)
{
if(rt_strcmp(argv[1],"start") == 0)
{
if(rt_mutex_take(task_mutex, RT_WAITING_NO) != RT_EOK)
{
rt_kprintf("The test thread is occupied.\n");
return -RT_ERROR;
}
else
{
/* Register the system indicator task */
rt_thread_t sys_led_task = rt_thread_create("sys_led_task",
sys_run_dir, RT_NULL,
THREAD_STACK_SIZE,
THREAD_PRIORITY, THREAD_TIMESLICE);
if (sys_led_task != RT_NULL)
rt_thread_startup(sys_led_task);
rt_kprintf("The sys run task is registered.\n");
}
}
else if(rt_strcmp(argv[1],"end") == 0)
{
rt_event_send(&task_event,TASK_KILL_FLAG);
rt_mutex_release(task_mutex);
rt_kprintf("The sys run task has been deleted.\n");
}
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s start\n",__func__);
rt_kprintf("%s end\n",__func__);
return -1;
}
return -1;
}
MSH_CMD_EXPORT(sys_run_task, sys run task operation);
/* Gpio output test */
static void gpio_output_test(void *parameter)
{
rt_uint32_t e;
rt_pin_mode(TEST_OUTPUT_PIN, PIN_MODE_OUTPUT);
while(1)
{
if(rt_event_recv(&task_event,TASK_KILL_FLAG,
RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR,
RT_WAITING_NO, &e) == RT_EOK)
{
rt_thread_t tid = rt_thread_self();
rt_thread_delete(tid);
}
rt_pin_write(TEST_OUTPUT_PIN, PIN_LOW);
rt_thread_mdelay(500);
rt_pin_write(TEST_OUTPUT_PIN, PIN_HIGH);
rt_thread_mdelay(500);
}
}
static int gpio_output_task(int argc, char *argv[])
{
if(argc == 2)
{
if(rt_strcmp(argv[1],"start") == 0)
{
if(rt_mutex_take(task_mutex, RT_WAITING_NO) != RT_EOK)
{
rt_kprintf("The test thread is occupied.\n");
return -RT_ERROR;
}
else
{
/* Gpio output test tasks */
rt_thread_t gpio_output_task = rt_thread_create("gpio_output_task",
gpio_output_test, RT_NULL,
THREAD_STACK_SIZE,
THREAD_PRIORITY, THREAD_TIMESLICE);
if (gpio_output_task != RT_NULL)
rt_thread_startup(gpio_output_task);
rt_kprintf("The gpio output task is registered.\n");
}
}
else if(rt_strcmp(argv[1],"end") == 0)
{
rt_event_send(&task_event,TASK_KILL_FLAG);
rt_mutex_release(task_mutex);
rt_kprintf("The gpio output task has been deleted.\n");
}
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s start\n",__func__);
rt_kprintf("%s end\n",__func__);
return -1;
}
return -1;
}
MSH_CMD_EXPORT(gpio_output_task, gpio output task operation);
/* Gpio input test */
static void key_iqr_handle(void *args)
{
/* gpio iqr fun */
rt_event_send(&led_event,TEST_GPIO_INT_ENV);
}
static void gpio_input_test(void *parameter)
{
uint8_t led_flag = PIN_LOW;
rt_uint32_t e;
rt_pin_mode(TEST_RES_PIN, PIN_MODE_OUTPUT);
rt_pin_write(TEST_RES_PIN, PIN_LOW);
rt_pin_mode(TEST_WAKEUP_PIN,PIN_MODE_INPUT_PULLDOWN);
rt_pin_mode(TEST_INPUT_PIN,PIN_MODE_INPUT_PULLUP);
rt_pin_attach_irq(TEST_INT_PIN,PIN_IRQ_MODE_FALLING,key_iqr_handle,RT_NULL);
rt_pin_irq_enable(TEST_INT_PIN,PIN_IRQ_ENABLE);
if(rt_event_init(&led_event,"led_event",RT_IPC_FLAG_FIFO) != RT_EOK)
{
rt_kprintf("rt_mutex_create error.\n");
}
while(1)
{
if(PIN_LOW == rt_pin_read(TEST_INPUT_PIN))
{
while(PIN_LOW == rt_pin_read(TEST_INPUT_PIN));
rt_event_send(&led_event,TEST_GPIO_KEY_ENV);
}
if(rt_event_recv(&led_event,(TEST_GPIO_INT_ENV|TEST_GPIO_KEY_ENV),
RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR,
RT_WAITING_NO, &e) == RT_EOK)
{
led_flag = (led_flag == PIN_LOW)?PIN_HIGH:PIN_LOW;
rt_pin_write(TEST_RES_PIN, led_flag);
}
if(rt_event_recv(&task_event,TASK_KILL_FLAG,
RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR,
RT_WAITING_NO, &e) == RT_EOK)
{
rt_thread_t tid = rt_thread_self();
rt_thread_delete(tid);
}
}
}
static int gpio_input_task(int argc, char *argv[])
{
if(argc == 2)
{
if(rt_strcmp(argv[1],"start") == 0)
{
if(rt_mutex_take(task_mutex, RT_WAITING_NO) != RT_EOK)
{
rt_kprintf("The test thread is occupied.\n");
return -RT_ERROR;
}
/* Gpio input test tasks */
rt_thread_t gpio_input_task = rt_thread_create("gpio_input_task",
gpio_input_test, RT_NULL,
THREAD_STACK_SIZE,
THREAD_PRIORITY, THREAD_TIMESLICE);
if (gpio_input_task != RT_NULL)
rt_thread_startup(gpio_input_task);
rt_kprintf("The gpio input task is registered.\n");
}
else if(rt_strcmp(argv[1],"end") == 0)
{
rt_event_send(&task_event,TASK_KILL_FLAG);
rt_mutex_release(task_mutex);
rt_kprintf("The gpio input task has been deleted.\n");
}
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s start\n",__func__);
rt_kprintf("%s end\n",__func__);
return -1;
}
return -1;
}
MSH_CMD_EXPORT(gpio_input_task, gpio input task operation);
/* uart test */
static rt_err_t uart_iqr_handle(rt_device_t dev, rt_size_t size)
{
/* Serial port callback function */
rt_sem_release(&rx_sem);
return RT_EOK;
}
static void uart_thread(void *parameter)
{
char ch;
while (1)
{
/* Serial port readout */
while (rt_device_read(serial, -1, &ch, 1) != 1)
{
/* semaphore blocking */
rt_sem_take(&rx_sem, RT_WAITING_FOREVER);
}
/* Output the data obtained from the serial port */
rt_device_write(serial, 0, &ch, 1);
rt_device_write(serial,0,"\n",1);
}
}
static int uart_task(int argc, char *argv[])
{
rt_err_t ret = RT_EOK;
char uart_name[RT_NAME_MAX] = "uart1";
char str[] = "hello RT-Thread!\r\n";
if (argc == 3)
{
if(rt_strcmp(argv[2],"start") == 0)
{
rt_strncpy(uart_name, argv[1], RT_NAME_MAX);
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s <uart name> start\n",__func__);
rt_kprintf("%s <uart name> end\n",__func__);
return -1;
}
}
else if(argc == 2)
{
if(rt_strcmp(argv[1],"start") == 0)
{
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s start\n",__func__);
rt_kprintf("%s end\n",__func__);
return -1;
}
}
else
{
rt_kprintf("Incomplete instruction.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s <uart name> start/end\n",__func__);
rt_kprintf("or\n");
rt_kprintf("%s start/end\n",__func__);
return -1;
}
/* Find Serial Devices */
serial = rt_device_find(uart_name);
if (!serial)
{
rt_kprintf("find %s failed!\n", uart_name);
return -RT_ERROR;
}
/* Initializing a Signal */
rt_sem_init(&rx_sem, "rx_sem", 0, RT_IPC_FLAG_FIFO);
/* Open the serial device with read/write and interrupt reception. */
rt_device_open(serial, RT_DEVICE_OFLAG_RDWR | RT_DEVICE_FLAG_INT_RX);
/* Setting the receive callback function */
rt_device_set_rx_indicate(serial, uart_iqr_handle);
/* Send String */
rt_device_write(serial, 0, str, (sizeof(str) - 1));
/* Creating a serial thread */
rt_thread_t thread = rt_thread_create("serial",
uart_thread, RT_NULL,
THREAD_STACK_SIZE,
THREAD_PRIORITY, THREAD_TIMESLICE);
if (thread != RT_NULL)
rt_thread_startup(thread);
return ret;
}
MSH_CMD_EXPORT(uart_task, uart device sample);
/* hw/sw iic test */
static void i2c_thread(void *parameter)
{
uint8_t write_addr = 0x00;
eeprom_write_type eeprom_date;
char send_dat[] = "i2c write eeprom";
char read_dat[20] = {0};
struct rt_i2c_msg msg1[2];
eeprom_date.in_data.write_addr = write_addr;
rt_strncpy(eeprom_date.in_data.write_date, send_dat, rt_strlen(send_dat));
msg1[0].addr = 0x51;
msg1[0].flags = RT_I2C_WR;
msg1[0].buf = eeprom_date.data;
msg1[0].len = (rt_strlen(send_dat) + 1);
if (rt_i2c_transfer(i2c_dev, msg1, 1) == 1)
{
rt_kprintf("eeprom write succeed!\n");
rt_kprintf("write_dat = %s\r\n",send_dat);
}
else
{
rt_kprintf("eeprom write error!\n");
}
msg1[0].addr = 0x51;
msg1[0].flags = RT_I2C_WR;
msg1[0].buf = &write_addr;
msg1[0].len = 1;
msg1[1].addr = 0x51;
msg1[1].flags = RT_I2C_RD;
msg1[1].buf = (uint8_t *)read_dat;
msg1[1].len = rt_strlen(send_dat);
if (rt_i2c_transfer(i2c_dev, msg1, 2) == 2)
{
rt_kprintf("eeprom read succeed!\n");
rt_kprintf("read_dat = %s\r\n",read_dat);
}
else
{
rt_kprintf("eeprom read error!\n");
}
}
static int i2c_task(int argc, char *argv[])
{
rt_err_t ret = RT_EOK;
char i2c_name[RT_NAME_MAX] = "hw_i2c0";
if (argc == 3)
{
if(rt_strcmp(argv[2],"start") == 0)
{
rt_strncpy(i2c_name, argv[1], RT_NAME_MAX);
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s <i2c name> start\n",__func__);
rt_kprintf("%s <i2c name> end\n",__func__);
return -1;
}
}
else if(argc == 2)
{
if(rt_strcmp(argv[1],"start") == 0)
{
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s start\n",__func__);
rt_kprintf("%s end\n",__func__);
return -1;
}
}
else
{
rt_kprintf("Incomplete instruction.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s <i2c name> start/end\n",__func__);
rt_kprintf("or\n");
rt_kprintf("%s start/end\n",__func__);
return -1;
}
/* Find I2C Devices */
i2c_dev = (struct rt_i2c_bus_device *)rt_device_find(i2c_name);
if (!i2c_dev)
{
rt_kprintf("find %s failed!\n", i2c_name);
return -RT_ERROR;
}
/* Execute I2C read/write eeprom function */
i2c_thread(RT_NULL);
return ret;
}
MSH_CMD_EXPORT(i2c_task, i2c device sample);
/* spi test */
static void spi_thread(void *parameter)
{
rt_uint8_t w25x_read_id = 0x9F;
rt_uint8_t id[5] = {0};
/* Use rt_spi_send_then_recv() to send commands to read IDs */
rt_spi_take_bus(spi_dev);
rt_spi_take(spi_dev);
rt_spi_send_then_recv(spi_dev, &w25x_read_id, 1, id, 3);
rt_spi_release(spi_dev);
rt_spi_release_bus(spi_dev);
rt_kprintf("use rt_spi_send_then_recv() read MX25L6406 ID is:0x%X%X%X\n", id[0], id[1], id[2]);
}
static int spi_task(int argc, char *argv[])
{
rt_err_t ret = RT_EOK;
struct rt_spi_configuration cfg;
char spi_name[RT_NAME_MAX] = "spi0";
char flash_name[RT_NAME_MAX] = "flash";
if (argc == 3)
{
if(rt_strcmp(argv[2],"start") == 0)
{
rt_strncpy(spi_name, argv[1], RT_NAME_MAX);
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s <spi name> start\n",__func__);
rt_kprintf("%s <spi name> end\n",__func__);
return -1;
}
}
else if(argc == 2)
{
if(rt_strcmp(argv[1],"start") == 0)
{
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s start\n",__func__);
rt_kprintf("%s end\n",__func__);
return -1;
}
}
else
{
rt_kprintf("Incomplete instruction.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s <spi name> start/end\n",__func__);
rt_kprintf("or\n");
rt_kprintf("%s start/end\n",__func__);
return -1;
}
/* Binding CS pin */
ret = rt_hw_spi_device_attach(spi_name,flash_name,HT_GPIOD,GPIO_PIN_9);
if(ret != RT_EOK)
{
rt_kprintf("Failed CS pin binding for %s!\n", spi_name);
return -RT_ERROR;
}
/* Find flash devices */
spi_dev = (struct rt_spi_device*)rt_device_find(flash_name);
if (!spi_dev)
{
rt_kprintf("find %s failed!\n", spi_name);
return -RT_ERROR;
}
/* Configuring the SPI Bus */
cfg.data_width = 8;
cfg.mode = RT_SPI_MASTER | RT_SPI_MODE_3 | RT_SPI_MSB;
cfg.max_hz = 8;
rt_spi_configure(spi_dev,&cfg);
rt_kprintf("SPI0 initialization succeeded!\n");
/* Execute flash read and write functions */
spi_thread(RT_NULL);
rt_device_unregister((rt_device_t)spi_dev);
return ret;
}
MSH_CMD_EXPORT(spi_task, spi device sample);
/* adc test */
static void adc_test(void *parameter)
{
rt_uint32_t adc0_ch11_val,adc0_ch12_val;
rt_adc_device_t adc_dev = (rt_adc_device_t)rt_device_find("adc0");
if (!adc_dev)
{
rt_kprintf("No ADC0 device found!\n");
}
else
{
rt_adc_enable(adc_dev,ADC_CH_11);
rt_adc_enable(adc_dev,ADC_CH_12);
}
while(1)
{
adc0_ch11_val = rt_adc_read(adc_dev,11);
adc0_ch12_val = rt_adc_read(adc_dev,12);
rt_kprintf("adc0_ch6_val = %d\n",adc0_ch11_val);
rt_kprintf("adc0_ch7_val = %d\n",adc0_ch12_val);
rt_thread_mdelay(50);
}
}
static int adc_task(int argc, char *argv[])
{
if(argc == 2)
{
if(rt_strcmp(argv[1],"start") == 0)
{
/* Adc test tasks */
rt_thread_t adc_task = rt_thread_create("adc_task",
adc_test, RT_NULL,
THREAD_STACK_SIZE,
THREAD_PRIORITY, THREAD_TIMESLICE);
if (adc_task != RT_NULL)
rt_thread_startup(adc_task);
rt_kprintf("The adc task is registered.\n");
}
else if(rt_strcmp(argv[1],"end") == 0)
{
rt_event_send(&task_event,TASK_KILL_FLAG);
rt_kprintf("The adc task has been deleted.\n");
}
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s start\n",__func__);
rt_kprintf("%s end\n",__func__);
return -1;
}
return -1;
}
MSH_CMD_EXPORT(adc_task, adc task operation);
/* wdt test */
static void wdt_test(void)
{
rt_device_control(wdt_dev, RT_DEVICE_CTRL_WDT_KEEPALIVE, RT_NULL);
}
static int wdt_task(int argc, char *argv[])
{
rt_err_t ret = -RT_ERROR;
rt_uint16_t wdt_time = 5;
char dev_name[] = "wdt";
if(argc == 2)
{
if(rt_strcmp(argv[1],"start") == 0)
{
/* Find wdt devices */
wdt_dev = rt_device_find(dev_name);
if(wdt_dev == RT_NULL)
{
rt_kprintf("No corresponding equipment found.\n");
return -1;
}
/* Configuring the Watchdog */
ret = rt_device_control(wdt_dev, RT_DEVICE_CTRL_WDT_SET_TIMEOUT, &wdt_time);
if(ret != RT_EOK)
{
rt_kprintf("wdt configuration failed.\n");
return -1;
}
/* Start the Watchdog */
ret = rt_device_control(wdt_dev, RT_DEVICE_CTRL_WDT_START, RT_NULL);
if(ret != RT_EOK)
{
rt_kprintf("wdt start failed.\n");
return -1;
}
/* Setting up idle threads */
rt_thread_idle_sethook(wdt_test);
rt_kprintf("Watchdog started successfully.\n");
}
else if(rt_strcmp(argv[1],"stop") == 0)
{
/* Verify device handle */
if(wdt_dev == RT_NULL)
{
rt_kprintf("Device handle does not exist.\n");
return -1;
}
/* Stop the Watchdog */
ret = rt_device_control(wdt_dev, RT_DEVICE_CTRL_WDT_STOP, RT_NULL);
if(ret != RT_EOK)
{
rt_kprintf("wdt start failed.\n");
return -1;
}
/* Hook function to delete idle threads */
rt_thread_idle_delhook(wdt_test);
rt_kprintf("Watchdog has stopped.\n");
}
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s start\n",__func__);
rt_kprintf("%s stop\n",__func__);
return -1;
}
return -1;
}
MSH_CMD_EXPORT(wdt_task, wdt task operation);
#endif /* BSP_USING_TEST */

330
bsp/ht32/ht32f12366/board/Kconfig
View File

@ -1,73 +1,311 @@
menu "Hardware Drivers Config"
config SOC_HT32F12366
bool
select SOC_SERIES_HT32F1
select RT_USING_COMPONENTS_INIT
select RT_USING_USER_MAIN
default y
menu "Chip Configuration"
config SOC_KERNEL
bool
select SOC_SERIES_HT32F5 if CORTEX_M0
select SOC_SERIES_HT32F1 if CORTEX_M3
select RT_USING_COMPONENTS_INIT
select RT_USING_USER_MAIN
default y
choice
prompt "Select the kernel"
default CORTEX_M0
config CORTEX_M0
bool "CORTEX_M0"
config CORTEX_M3
bool "CORTEX_M3"
endchoice
choice
prompt "Select the chip you are using"
depends on CORTEX_M0
default HT32F52352
config SOC_HT32F0006
bool "HT32F0006"
config SOC_HT32F0008
bool "HT32F0008"
config SOC_HT32F50241
bool "HT32F50241"
config SOC_HT32F50343
bool "HT32F50343"
config SOC_HT32F50441
bool "HT32F50441"
config SOC_HT32F50452
bool "HT32F50452"
config SOC_HT32F52241
bool "HT32F52241"
config SOC_HT32F52244
bool "HT32F52244"
config SOC_HT32F52253
bool "HT32F52253"
config SOC_HT32F52341
bool "HT32F52341"
config SOC_HT32F52352
bool "HT32F52352"
config SOC_HT32F52354
bool "HT32F52354"
config SOC_HT32F52367
bool "HT32F52367"
config SOC_HT32F53241
bool "HT32F53241"
config SOC_HT32F53252
bool "HT32F53252"
config SOC_HT32F54241
bool "HT32F54241"
config SOC_HT32F54253
bool "HT32F54253"
config SOC_HT32F57341
bool "HT32F57341"
config SOC_HT32F57352
bool "HT32F57352"
config SOC_HT32F5828
bool "HT32F5828"
config SOC_HT32F59041
bool "HT32F59041"
config SOC_HT32F59741
bool "HT32F59741"
config SOC_HT32F61141
bool "HT32F61141"
config SOC_HT32F61245
bool "HT32F61245"
config SOC_HT32F61355
bool "HT32F61355"
config SOC_HT32F61356
bool "HT32F61356"
config SOC_HT32F61357
bool "HT32F61357"
config SOC_HT32F61641
bool "HT32F61641"
config SOC_HT32F65240
bool "HT32F65240"
config SOC_HT32F67051
bool "HT32F67051"
config SOC_HT32F67741
bool "HT32F67741"
endchoice
choice
prompt "Select the chip you are using"
depends on CORTEX_M3
default HT32F52352
config SOC_HT32F1654
bool "HT32F1654"
config SOC_HT32F1656
bool "HT32F1656"
config SOC_HT32F12345
bool "HT32F12345"
config SOC_HT32F12364
bool "HT32F12364"
config SOC_HT32F12366
bool "HT32F12366"
endchoice
endmenu
menu "Onboard Peripheral Drivers"
config BSP_USING_TEST
bool "Enable test"
default n
if RT_USING_CONSOLE
config RT_CONSOLE_DEVICE_NAME
string "the device name for console"
default "usart0"
endif
endmenu
menu "On-chip Peripheral Drivers"
config BSP_USING_GPIO
config BSP_USING_GPIO
bool "Enable GPIO"
select RT_USING_PIN
select RT_USING_PIN if BSP_USING_GPIO
default n
    menuconfig BSP_USING_UART
menuconfig BSP_USING_UART
bool "Enable UART"
default n
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_USART0
bool "Enable USART0"
default n
config BSP_USING_USART0
bool "Enable USART0"
default n
config BSP_USING_USART0_NAME
depends on BSP_USING_USART0
string "usart0 bus name"
default "usart0"
config BSP_USING_USART1
bool "Enable USART1"
default n
config BSP_USING_USART1
bool "Enable USART1"
default n
config BSP_USING_USART1_NAME
depends on BSP_USING_USART1
string "usart1 bus name"
default "usart1"
config BSP_USING_UART0
bool "Enable UART0"
default n
config BSP_USING_UART0
bool "Enable UART0"
default n
config BSP_USING_UART0_NAME
depends on BSP_USING_UART0
string "uart0 bus name"
default "uart0"
config BSP_USING_UART1
bool "Enable UART1"
default n
        endif
config BSP_USING_UART1
bool "Enable UART1"
default n
config BSP_USING_UART1_NAME
depends on BSP_USING_UART1
string "uart1 bus name"
default "uart1"
endif
menuconfig BSP_USING_SPI
bool "Enable SPI Bus"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI0
bool "Enable SPI0 Bus"
default n
menuconfig BSP_USING_SPI
bool "Enable SPI Bus"
default n
select RT_USING_SPI if BSP_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI0
bool "Enable SPI0 Bus"
default n
config BSP_USING_SPI0_NAME
depends on BSP_USING_SPI0
string "spi0 bus name"
default "spi0"
config BSP_USING_SPI1
bool "Enable SPI1 Bus"
default n 
endif
config BSP_USING_SPI1
bool "Enable SPI1 Bus"
default n
config BSP_USING_SPI1_NAME
depends on BSP_USING_SPI1
string "spi1 bus name"
default "spi1"
endif
menuconfig BSP_USING_I2C
bool "Enable I2C Bus"
default n
select RT_USING_I2C
if BSP_USING_I2C
config BSP_USING_I2C0
bool "Enable I2C0 Bus"
default n
menuconfig BSP_USING_I2C
bool "Enable I2C Bus"
default n
if BSP_USING_I2C
menuconfig BSP_USING_I2C_HW
bool "Enable I2C Bus(hardware)"
default n
select RT_USING_I2C if BSP_USING_I2C_HW
if BSP_USING_I2C_HW
config BSP_USING_I2C0_HW
bool "Enable Hardware I2C0 Bus"
default n
config BSP_USING_I2C0_HW_NAME
depends on BSP_USING_I2C0_HW
string "hardware i2c0 name"
default "hw_i2c0"
config BSP_USING_I2C1
bool "Enable I2C1 Bus"
default n
endif
config BSP_USING_I2C1_HW
bool "Enable Hardware I2C1 Bus"
default n
config BSP_USING_I2C1_HW_NAME
depends on BSP_USING_I2C1_HW
string "hardware i2c1 name"
default "hw_i2c1"
endif
menuconfig BSP_USING_I2C_SW
bool "Enable I2C Bus(software)"
default n
select BSP_USING_GPIO if BSP_USING_I2C_SW
select RT_USING_I2C if BSP_USING_I2C_SW
if BSP_USING_I2C_SW
config BSP_USING_I2C0_SW
bool "Enable Software I2C0 Bus"
default n
config BSP_USING_I2C0_SW_NAME
depends on BSP_USING_I2C0_SW
string "software i2c0 name"
default "sw_i2c0"
if BSP_USING_I2C0_SW
config BSP_I2C0_SLC_PIN
int "i2c0 slc pin number"
range 0 51
default 22
config BSP_I2C0_SDA_PIN
int "i2c0 sda pin number"
range 0 51
default 23
endif
config BSP_USING_I2C1_SW
bool "Enable Software I2C1 Bus"
default n
config BSP_USING_I2C1_SW_NAME
depends on BSP_USING_I2C1_SW
string "software i2c1 name"
default "sw_i2c1"
if BSP_USING_I2C1_SW
config BSP_I2C1_SLC_PIN
int "i2c1 slc pin number"
range 0 51
default 24
config BSP_I2C1_SDA_PIN
int "i2c1 sda pin number"
range 0 51
default 25
endif
config BSP_USING_I2C2_SW
bool "Enable Software I2C2 Bus"
default n
config BSP_USING_I2C2_SW_NAME
depends on BSP_USING_I2C2_SW
string "software i2c2 name"
default "sw_i2c2"
if BSP_USING_I2C2_SW
config BSP_I2C2_SLC_PIN
int "i2c2 slc pin number"
range 0 51
default 26
config BSP_I2C2_SDA_PIN
int "i2c2 sda pin number"
range 0 51
default 27
endif
endif
endif
menuconfig BSP_USING_ADC
bool "Enable ADC"
default n
select RT_USING_ADC if BSP_USING_ADC
if BSP_USING_ADC
config BSP_USING_ADC0
bool "Enable ADC0"
default n
config BSP_USING_ADC0_NAME
depends on BSP_USING_ADC0
string "adc0 device name"
default "adc0"
config BSP_USING_ADC1
bool "Enable ADC1"
depends on SOC_HT32F65240
default n
config BSP_USING_ADC1_NAME
depends on BSP_USING_ADC1
string "adc1 device name"
default "adc1"
endif
menuconfig BSP_USING_WDT
bool "Enable WDT"
default n
select RT_USING_WDT if BSP_USING_WDT
config BSP_USING_WDT_NAME
depends on BSP_USING_WDT
string "wdt device name"
default "wdt"
endmenu
menu "Board extended module Drivers"

8
bsp/ht32/ht32f12366/board/inc/board.h
View File

@ -19,18 +19,10 @@
#include "drv_gpio.h"
#endif
#ifdef BSP_USING_UART
#include "drv_usart.h"
#endif
#ifdef BSP_USING_SPI
#include "drv_spi.h"
#endif
#ifdef BSP_USING_I2C
#include "drv_i2c.h"
#endif
#ifdef __cplusplus
extern "C" {
#endif

158
bsp/ht32/ht32f12366/board/inc/ht32_msp.h
View File

@ -108,14 +108,14 @@ extern "C" {
#define HTCFG_SPI0_IPN SPI0
#define _HTCFG_SPI0_SCK_GPIOX B
#define _HTCFG_SPI0_SCK_GPION 3
#define _HTCFG_SPI0_SCK_GPIOX D
#define _HTCFG_SPI0_SCK_GPION 10
#define _HTCFG_SPI0_MISO_GPIOX B
#define _HTCFG_SPI0_MISO_GPION 5
#define _HTCFG_SPI0_MISO_GPIOX D
#define _HTCFG_SPI0_MISO_GPION 12
#define _HTCFG_SPI0_MOSI_GPIOX B
#define _HTCFG_SPI0_MOSI_GPION 4
#define _HTCFG_SPI0_MOSI_GPIOX D
#define _HTCFG_SPI0_MOSI_GPION 11
#define HTCFG_SPI0_SCK_GPIO_CLK STRCAT2(P, _HTCFG_SPI0_SCK_GPIOX)
#define HTCFG_SPI0_SCK_GPIO_ID STRCAT2(GPIO_P, _HTCFG_SPI0_SCK_GPIOX)
@ -159,8 +159,8 @@ extern "C" {
#endif
/* I2C gpio */
#ifdef BSP_USING_I2C
#ifdef BSP_USING_I2C0
#ifdef BSP_USING_I2C_HW
#ifdef BSP_USING_I2C0_HW
#define HTCFG_I2C0_IPN I2C0
@ -179,7 +179,7 @@ extern "C" {
#define HTCFG_I2C0_SDA_GPIO_PIN STRCAT2(GPIO_PIN_, _HTCFG_I2C0_SDA_GPION)
#endif
#ifdef BSP_USING_I2C1
#ifdef BSP_USING_I2C1_HW
#define HTCFG_I2C1_IPN I2C1
@ -197,12 +197,150 @@ extern "C" {
#define HTCFG_I2C1_SDA_GPIO_ID STRCAT2(GPIO_P, _HTCFG_I2C1_SDA_GPIOX)
#define HTCFG_I2C1_SDA_GPIO_PIN STRCAT2(GPIO_PIN_, _HTCFG_I2C1_SDA_GPION)
#endif
#endif
/* ADC gpio */
#ifdef BSP_USING_ADC
#ifdef BSP_USING_ADC0
#define HTCFG_ADC0_IPN ADC0
#define _HTCFG_ADC0CH0_GPIOX A
#define _HTCFG_ADC0CH0_AFION 0
#define _HTCFG_ADC0CH1_GPIOX A
#define _HTCFG_ADC0CH1_AFION 1
#define _HTCFG_ADC0CH2_GPIOX A
#define _HTCFG_ADC0CH2_AFION 2
#define _HTCFG_ADC0CH3_GPIOX A
#define _HTCFG_ADC0CH3_AFION 3
#define _HTCFG_ADC0CH4_GPIOX A
#define _HTCFG_ADC0CH4_AFION 4
#define _HTCFG_ADC0CH5_GPIOX A
#define _HTCFG_ADC0CH5_AFION 5
#define _HTCFG_ADC0CH6_GPIOX A
#define _HTCFG_ADC0CH6_AFION 6
#define _HTCFG_ADC0CH7_GPIOX A
#define _HTCFG_ADC0CH7_AFION 7
#define _HTCFG_ADC0CH8_GPIOX E
#define _HTCFG_ADC0CH8_AFION 8
#define _HTCFG_ADC0CH9_GPIOX E
#define _HTCFG_ADC0CH9_AFION 9
#define _HTCFG_ADC0CH10_GPIOX E
#define _HTCFG_ADC0CH10_AFION 10
#define _HTCFG_ADC0CH11_GPIOX E
#define _HTCFG_ADC0CH11_AFION 11
#define _HTCFG_ADC0CH12_GPIOX E
#define _HTCFG_ADC0CH12_AFION 12
#define _HTCFG_ADC0CH13_GPIOX C
#define _HTCFG_ADC0CH13_AFION 9
#define _HTCFG_ADC0CH14_GPIOX C
#define _HTCFG_ADC0CH14_AFION 10
#define _HTCFG_ADC0CH15_GPIOX C
#define _HTCFG_ADC0CH15_AFION 11
#define HTCFG_ADC0CH0_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH0_GPIOX)
#define HTCFG_ADC0CH1_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH1_GPIOX)
#define HTCFG_ADC0CH2_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH2_GPIOX)
#define HTCFG_ADC0CH3_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH3_GPIOX)
#define HTCFG_ADC0CH4_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH4_GPIOX)
#define HTCFG_ADC0CH5_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH5_GPIOX)
#define HTCFG_ADC0CH6_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH6_GPIOX)
#define HTCFG_ADC0CH7_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH7_GPIOX)
#define HTCFG_ADC0CH8_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH8_GPIOX)
#define HTCFG_ADC0CH9_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH9_GPIOX)
#define HTCFG_ADC0CH10_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH10_GPIOX)
#define HTCFG_ADC0CH11_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH11_GPIOX)
#define HTCFG_ADC0CH12_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH12_GPIOX)
#define HTCFG_ADC0CH13_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH13_GPIOX)
#define HTCFG_ADC0CH14_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH14_GPIOX)
#define HTCFG_ADC0CH15_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH15_GPIOX)
#define HTCFG_ADC0CH0_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH0_AFION)
#define HTCFG_ADC0CH1_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH1_AFION)
#define HTCFG_ADC0CH2_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH2_AFION)
#define HTCFG_ADC0CH3_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH3_AFION)
#define HTCFG_ADC0CH4_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH4_AFION)
#define HTCFG_ADC0CH5_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH5_AFION)
#define HTCFG_ADC0CH6_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH6_AFION)
#define HTCFG_ADC0CH7_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH7_AFION)
#define HTCFG_ADC0CH8_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH8_AFION)
#define HTCFG_ADC0CH9_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH9_AFION)
#define HTCFG_ADC0CH10_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH10_AFION)
#define HTCFG_ADC0CH11_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH11_AFION)
#define HTCFG_ADC0CH12_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH12_AFION)
#define HTCFG_ADC0CH13_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH13_AFION)
#define HTCFG_ADC0CH14_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH14_AFION)
#define HTCFG_ADC0CH15_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH15_AFION)
#endif
#ifdef BSP_USING_ADC1
#define HTCFG_ADC1_IPN ADC1
#define _HTCFG_ADC1CH0_GPIOX B
#define _HTCFG_ADC1CH0_AFION 8
#define _HTCFG_ADC1CH1_GPIOX A
#define _HTCFG_ADC1CH1_AFION 0
#define _HTCFG_ADC1CH2_GPIOX A
#define _HTCFG_ADC1CH2_AFION 1
#define _HTCFG_ADC1CH3_GPIOX A
#define _HTCFG_ADC1CH3_AFION 2
#define _HTCFG_ADC1CH4_GPIOX A
#define _HTCFG_ADC1CH4_AFION 3
#define _HTCFG_ADC1CH5_GPIOX A
#define _HTCFG_ADC1CH5_AFION 4
#define _HTCFG_ADC1CH6_GPIOX A
#define _HTCFG_ADC1CH6_AFION 5
#define _HTCFG_ADC1CH7_GPIOX A
#define _HTCFG_ADC1CH7_AFION 6
#define HTCFG_ADC1CH0_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC1CH0_GPIOX)
#define HTCFG_ADC1CH1_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC1CH1_GPIOX)
#define HTCFG_ADC1CH2_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC1CH2_GPIOX)
#define HTCFG_ADC1CH3_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC1CH3_GPIOX)
#define HTCFG_ADC1CH4_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC1CH4_GPIOX)
#define HTCFG_ADC1CH5_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC1CH5_GPIOX)
#define HTCFG_ADC1CH6_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC1CH6_GPIOX)
#define HTCFG_ADC1CH7_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC1CH7_GPIOX)
#define HTCFG_ADC1CH0_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC1CH0_AFION)
#define HTCFG_ADC1CH1_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC1CH1_AFION)
#define HTCFG_ADC1CH2_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC1CH2_AFION)
#define HTCFG_ADC1CH3_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC1CH3_AFION)
#define HTCFG_ADC1CH4_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC1CH4_AFION)
#define HTCFG_ADC1CH5_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC1CH5_AFION)
#define HTCFG_ADC1CH6_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC1CH6_AFION)
#define HTCFG_ADC1CH7_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC1CH7_AFION)
#endif
#endif
void ht32_usart_gpio_init(void *instance);
void ht32_spi_gpio_init(void *instance);
void ht32_i2c_gpio_init(void *instance);
void ht32_hardware_i2c_gpio_init(void *instance);
void ht32_adc_gpio_init(void *instance,int8_t channel);
#ifdef __cplusplus
}

120
bsp/ht32/ht32f12366/board/src/ht32_msp.c
View File

@ -107,12 +107,12 @@ void ht32_spi_gpio_init(void *instance)
#endif
/* GPIO configuration for I2C */
#ifdef BSP_USING_I2C
void ht32_i2c_gpio_init(void *instance)
#ifdef BSP_USING_I2C_HW
void ht32_hardware_i2c_gpio_init(void *instance)
{
CKCU_PeripClockConfig_TypeDef CKCUClock = {{0}};
HT_I2C_TypeDef *i2c_x = (HT_I2C_TypeDef *)instance;
#ifdef BSP_USING_I2C0
#ifdef BSP_USING_I2C0_HW
if(HT_I2C0 == i2c_x)
{
CKCUClock.Bit.HTCFG_I2C0_SCL_GPIO_CLK = 1;
@ -123,7 +123,7 @@ void ht32_i2c_gpio_init(void *instance)
AFIO_GPxConfig(HTCFG_I2C0_SDA_GPIO_ID,HTCFG_I2C0_SDA_GPIO_PIN,AFIO_FUN_I2C);
}
#endif
#ifdef BSP_USING_I2C1
#ifdef BSP_USING_I2C1_HW
if(HT_I2C1 == i2c_x)
{
CKCUClock.Bit.HTCFG_I2C1_SCL_GPIO_CLK = 1;
@ -136,3 +136,115 @@ void ht32_i2c_gpio_init(void *instance)
#endif
}
#endif
/* GPIO configuration for ADC */
#ifdef BSP_USING_ADC
void ht32_adc_gpio_init(void *instance,int8_t channel)
{
CKCU_PeripClockConfig_TypeDef CKCUClock = {{ 0 }};
HT_ADC_TypeDef *adc_x = (HT_ADC_TypeDef *)instance;
#ifdef BSP_USING_ADC0
if (HT_ADC0 == adc_x)
{
/* Enable peripheral clock */
CKCUClock.Bit.AFIO = 1;
CKCUClock.Bit.ADC0 = 1;
CKCU_PeripClockConfig(CKCUClock, ENABLE);
/* Configure AFIO mode as ADC function */
switch(channel)
{
case 0:
AFIO_GPxConfig(HTCFG_ADC0CH0_GPIO_ID, HTCFG_ADC0CH0_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 1:
AFIO_GPxConfig(HTCFG_ADC0CH1_GPIO_ID, HTCFG_ADC0CH1_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 2:
AFIO_GPxConfig(HTCFG_ADC0CH2_GPIO_ID, HTCFG_ADC0CH2_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 3:
AFIO_GPxConfig(HTCFG_ADC0CH3_GPIO_ID, HTCFG_ADC0CH3_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 4:
AFIO_GPxConfig(HTCFG_ADC0CH4_GPIO_ID, HTCFG_ADC0CH4_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 5:
AFIO_GPxConfig(HTCFG_ADC0CH5_GPIO_ID, HTCFG_ADC0CH5_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 6:
AFIO_GPxConfig(HTCFG_ADC0CH6_GPIO_ID, HTCFG_ADC0CH6_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 7:
AFIO_GPxConfig(HTCFG_ADC0CH7_GPIO_ID, HTCFG_ADC0CH7_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 8:
AFIO_GPxConfig(HTCFG_ADC0CH8_GPIO_ID, HTCFG_ADC0CH8_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 9:
AFIO_GPxConfig(HTCFG_ADC0CH9_GPIO_ID, HTCFG_ADC0CH9_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 10:
AFIO_GPxConfig(HTCFG_ADC0CH10_GPIO_ID, HTCFG_ADC0CH10_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 11:
AFIO_GPxConfig(HTCFG_ADC0CH11_GPIO_ID, HTCFG_ADC0CH11_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 12:
AFIO_GPxConfig(HTCFG_ADC0CH12_GPIO_ID, HTCFG_ADC0CH12_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 13:
AFIO_GPxConfig(HTCFG_ADC0CH13_GPIO_ID, HTCFG_ADC0CH13_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 14:
AFIO_GPxConfig(HTCFG_ADC0CH14_GPIO_ID, HTCFG_ADC0CH14_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 15:
AFIO_GPxConfig(HTCFG_ADC0CH15_GPIO_ID, HTCFG_ADC0CH15_AFIO_PIN, AFIO_FUN_ADC0);
break;
default:
break;
}
}
#endif
#ifdef BSP_USING_ADC1
if (HT_ADC1 == adc_x)
{
/* Enable peripheral clock */
CKCUClock.Bit.AFIO = 1;
CKCUClock.Bit.ADC1 = 1;
CKCU_PeripClockConfig(CKCUClock, ENABLE);
/* Configure AFIO mode as ADC function */
switch(channel)
{
case 0:
AFIO_GPxConfig(HTCFG_ADC1CH0_GPIO_ID, HTCFG_ADC1CH0_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 1:
AFIO_GPxConfig(HTCFG_ADC1CH1_GPIO_ID, HTCFG_ADC1CH1_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 2:
AFIO_GPxConfig(HTCFG_ADC1CH2_GPIO_ID, HTCFG_ADC1CH2_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 3:
AFIO_GPxConfig(HTCFG_ADC1CH3_GPIO_ID, HTCFG_ADC1CH3_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 4:
AFIO_GPxConfig(HTCFG_ADC1CH4_GPIO_ID, HTCFG_ADC1CH4_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 5:
AFIO_GPxConfig(HTCFG_ADC1CH5_GPIO_ID, HTCFG_ADC1CH5_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 6:
AFIO_GPxConfig(HTCFG_ADC1CH6_GPIO_ID, HTCFG_ADC1CH6_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 7:
AFIO_GPxConfig(HTCFG_ADC1CH7_GPIO_ID, HTCFG_ADC1CH7_AFIO_PIN, AFIO_FUN_ADC0);
break;
default:
break;
}
}
#endif
}
#endif

212
bsp/ht32/ht32f12366/project.uvoptx
View File

@ -186,6 +186,18 @@
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>2</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>applications\test.c</PathWithFileName>
<FilenameWithoutPath>test.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
@ -196,7 +208,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>2</FileNumber>
<FileNumber>3</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -208,7 +220,7 @@
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>3</FileNumber>
<FileNumber>4</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -220,7 +232,7 @@
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>4</FileNumber>
<FileNumber>5</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -232,7 +244,7 @@
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>5</FileNumber>
<FileNumber>6</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -244,7 +256,7 @@
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>6</FileNumber>
<FileNumber>7</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -256,7 +268,7 @@
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>7</FileNumber>
<FileNumber>8</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -268,7 +280,7 @@
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>8</FileNumber>
<FileNumber>9</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -280,7 +292,7 @@
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>9</FileNumber>
<FileNumber>10</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -300,7 +312,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>10</FileNumber>
<FileNumber>11</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -312,7 +324,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>11</FileNumber>
<FileNumber>12</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -324,7 +336,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>12</FileNumber>
<FileNumber>13</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -336,7 +348,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>13</FileNumber>
<FileNumber>14</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -348,7 +360,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>14</FileNumber>
<FileNumber>15</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -360,7 +372,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>15</FileNumber>
<FileNumber>16</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -372,7 +384,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>16</FileNumber>
<FileNumber>17</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -384,7 +396,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>17</FileNumber>
<FileNumber>18</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -396,7 +408,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>18</FileNumber>
<FileNumber>19</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -408,7 +420,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>19</FileNumber>
<FileNumber>20</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -420,7 +432,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>20</FileNumber>
<FileNumber>21</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -432,7 +444,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>21</FileNumber>
<FileNumber>22</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -444,7 +456,19 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>22</FileNumber>
<FileNumber>23</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\misc\adc.c</PathWithFileName>
<FilenameWithoutPath>adc.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>24</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -456,7 +480,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>23</FileNumber>
<FileNumber>25</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -468,7 +492,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>24</FileNumber>
<FileNumber>26</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -480,7 +504,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>25</FileNumber>
<FileNumber>27</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -490,6 +514,18 @@
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>28</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\watchdog\watchdog.c</PathWithFileName>
<FilenameWithoutPath>watchdog.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
@ -500,7 +536,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>26</FileNumber>
<FileNumber>29</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -512,7 +548,7 @@
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>27</FileNumber>
<FileNumber>30</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -524,7 +560,7 @@
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>28</FileNumber>
<FileNumber>31</FileNumber>
<FileType>2</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -536,7 +572,7 @@
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>29</FileNumber>
<FileNumber>32</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -548,7 +584,7 @@
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>30</FileNumber>
<FileNumber>33</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -560,7 +596,7 @@
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>31</FileNumber>
<FileNumber>34</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -580,7 +616,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>32</FileNumber>
<FileNumber>35</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -592,7 +628,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>33</FileNumber>
<FileNumber>36</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -604,7 +640,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>34</FileNumber>
<FileNumber>37</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -616,7 +652,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>35</FileNumber>
<FileNumber>38</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -636,7 +672,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>36</FileNumber>
<FileNumber>39</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -648,7 +684,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>37</FileNumber>
<FileNumber>40</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -660,19 +696,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>38</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\cpu_up.c</PathWithFileName>
<FilenameWithoutPath>cpu_up.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>39</FileNumber>
<FileNumber>41</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -684,7 +708,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>40</FileNumber>
<FileNumber>42</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -696,7 +720,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>41</FileNumber>
<FileNumber>43</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -708,7 +732,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>42</FileNumber>
<FileNumber>44</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -720,7 +744,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>43</FileNumber>
<FileNumber>45</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -732,7 +756,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>44</FileNumber>
<FileNumber>46</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -744,7 +768,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>45</FileNumber>
<FileNumber>47</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -756,7 +780,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>46</FileNumber>
<FileNumber>48</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -768,7 +792,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>47</FileNumber>
<FileNumber>49</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -780,7 +804,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>48</FileNumber>
<FileNumber>50</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -792,7 +816,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>49</FileNumber>
<FileNumber>51</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -804,7 +828,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>50</FileNumber>
<FileNumber>52</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -816,7 +840,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>51</FileNumber>
<FileNumber>53</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -828,7 +852,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>52</FileNumber>
<FileNumber>54</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -848,7 +872,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>53</FileNumber>
<FileNumber>55</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -860,7 +884,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>54</FileNumber>
<FileNumber>56</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -872,7 +896,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>55</FileNumber>
<FileNumber>57</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -884,7 +908,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>56</FileNumber>
<FileNumber>58</FileNumber>
<FileType>2</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -896,7 +920,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>57</FileNumber>
<FileNumber>59</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -916,7 +940,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>58</FileNumber>
<FileNumber>60</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -928,7 +952,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>59</FileNumber>
<FileNumber>61</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -940,7 +964,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>60</FileNumber>
<FileNumber>62</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -952,7 +976,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>61</FileNumber>
<FileNumber>63</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -964,7 +988,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>62</FileNumber>
<FileNumber>64</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -976,7 +1000,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>63</FileNumber>
<FileNumber>65</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -988,7 +1012,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>64</FileNumber>
<FileNumber>66</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1000,7 +1024,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>65</FileNumber>
<FileNumber>67</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1012,7 +1036,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>66</FileNumber>
<FileNumber>68</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1024,7 +1048,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>67</FileNumber>
<FileNumber>69</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1036,7 +1060,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>68</FileNumber>
<FileNumber>70</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1048,7 +1072,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>69</FileNumber>
<FileNumber>71</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1060,7 +1084,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>70</FileNumber>
<FileNumber>72</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1072,7 +1096,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>71</FileNumber>
<FileNumber>73</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1084,7 +1108,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>72</FileNumber>
<FileNumber>74</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1096,7 +1120,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>73</FileNumber>
<FileNumber>75</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1108,7 +1132,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>74</FileNumber>
<FileNumber>76</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1120,7 +1144,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>75</FileNumber>
<FileNumber>77</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1132,7 +1156,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>76</FileNumber>
<FileNumber>78</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1144,7 +1168,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>77</FileNumber>
<FileNumber>79</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1156,7 +1180,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>78</FileNumber>
<FileNumber>80</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1168,7 +1192,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>79</FileNumber>
<FileNumber>81</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1180,7 +1204,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>80</FileNumber>
<FileNumber>82</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1192,7 +1216,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>81</FileNumber>
<FileNumber>83</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1204,7 +1228,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>82</FileNumber>
<FileNumber>84</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1216,7 +1240,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>83</FileNumber>
<FileNumber>85</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1228,7 +1252,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>84</FileNumber>
<FileNumber>86</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>

172
bsp/ht32/ht32f12366/project.uvprojx
View File

@ -335,7 +335,7 @@
<MiscControls></MiscControls>
<Define>__STDC_LIMIT_MACROS, RT_USING_ARMLIBC, RT_USING_LIBC, USE_HT32F12366_SK, USE_HT32F12365_66, USE_MEM_HT32F12366, __CLK_TCK=RT_TICK_PER_SECOND, USE_HT32_DRIVER, __RTTHREAD__</Define>
<Undefine></Undefine>
<IncludePath>..\..\..\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\..\..\components\drivers\spi;..\..\..\libcpu\arm\cortex-m3;..\libraries\HT32_STD_1xxxx_FWLib\library\HT32F1xxxx_Driver\inc;..\..\..\components\drivers\include;..\..\..\components\libc\posix\io\eventfd;..\..\..\components\drivers\include;..\..\..\components\drivers\include;applications;..\libraries\HT32_STD_1xxxx_FWLib\library\CMSIS\Include;..\..\..\components\finsh;..\..\..\components\libc\posix\io\epoll;.;board\inc;..\..\..\components\libc\posix\ipc;..\..\..\components\drivers\include;..\libraries\HT32_STD_1xxxx_FWLib\library\Device\Holtek\HT32F1xxxx\Include;..\libraries\ht32_drivers;..\..\..\libcpu\arm\common;..\..\..\components\libc\posix\io\poll;..\..\..\components\libc\compilers\common\extension;..\..\..\components\libc\compilers\common\include</IncludePath>
<IncludePath>..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\libc\compilers\common\extension;..\..\..\include;..\libraries\HT32_STD_1xxxx_FWLib\library\HT32F1xxxx_Driver\inc;..\..\..\components\libc\posix\ipc;..\..\..\components\drivers\include;..\libraries\ht32_drivers;board\inc;..\..\..\libcpu\arm\common;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\..\..\components\libc\posix\io\epoll;..\..\..\components\drivers\include;applications;..\libraries\HT32_STD_1xxxx_FWLib\library\CMSIS\Include;..\..\..\components\libc\posix\io\eventfd;..\..\..\components\drivers\include;.;..\..\..\components\drivers\include;..\..\..\components\libc\posix\io\poll;..\..\..\components\drivers\include;..\..\..\components\libc\compilers\common\include;..\libraries\HT32_STD_1xxxx_FWLib\library\Device\Holtek\HT32F1xxxx\Include;..\..\..\components\finsh;..\..\..\components\drivers\spi;..\..\..\components\drivers\include;..\..\..\libcpu\arm\cortex-m3</IncludePath>
</VariousControls>
</Cads>
<Aads>
@ -384,6 +384,11 @@
<FileType>1</FileType>
<FilePath>applications\main.c</FilePath>
</File>
<File>
<FileName>test.c</FileName>
<FileType>1</FileType>
<FilePath>applications\test.c</FilePath>
</File>
</Files>
</Group>
<Group>
@ -1094,6 +1099,61 @@
</FileArmAds>
</FileOption>
</File>
<File>
<FileName>adc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\misc\adc.c</FilePath>
<FileOption>
<CommonProperty>
<UseCPPCompiler>2</UseCPPCompiler>
<RVCTCodeConst>0</RVCTCodeConst>
<RVCTZI>0</RVCTZI>
<RVCTOtherData>0</RVCTOtherData>
<ModuleSelection>0</ModuleSelection>
<IncludeInBuild>1</IncludeInBuild>
<AlwaysBuild>0</AlwaysBuild>
<GenerateAssemblyFile>0</GenerateAssemblyFile>
<AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode>
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<ComprImg>1</ComprImg>
</CommonProperty>
<FileArmAds>
<Cads>
<interw>2</interw>
<Optim>0</Optim>
<oTime>2</oTime>
<SplitLS>2</SplitLS>
<OneElfS>2</OneElfS>
<Strict>2</Strict>
<EnumInt>2</EnumInt>
<PlainCh>2</PlainCh>
<Ropi>2</Ropi>
<Rwpi>2</Rwpi>
<wLevel>0</wLevel>
<uThumb>2</uThumb>
<uSurpInc>2</uSurpInc>
<uC99>2</uC99>
<useXO>2</useXO>
<v6Lang>0</v6Lang>
<v6LangP>0</v6LangP>
<vShortEn>2</vShortEn>
<vShortWch>2</vShortWch>
<v6Lto>2</v6Lto>
<v6WtE>2</v6WtE>
<v6Rtti>2</v6Rtti>
<VariousControls>
<MiscControls> </MiscControls>
<Define>__RT_IPC_SOURCE__</Define>
<Undefine> </Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Cads>
</FileArmAds>
</FileOption>
</File>
<File>
<FileName>pin.c</FileName>
<FileType>1</FileType>
@ -1314,6 +1374,61 @@
</FileArmAds>
</FileOption>
</File>
<File>
<FileName>watchdog.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\watchdog\watchdog.c</FilePath>
<FileOption>
<CommonProperty>
<UseCPPCompiler>2</UseCPPCompiler>
<RVCTCodeConst>0</RVCTCodeConst>
<RVCTZI>0</RVCTZI>
<RVCTOtherData>0</RVCTOtherData>
<ModuleSelection>0</ModuleSelection>
<IncludeInBuild>1</IncludeInBuild>
<AlwaysBuild>0</AlwaysBuild>
<GenerateAssemblyFile>0</GenerateAssemblyFile>
<AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode>
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<ComprImg>1</ComprImg>
</CommonProperty>
<FileArmAds>
<Cads>
<interw>2</interw>
<Optim>0</Optim>
<oTime>2</oTime>
<SplitLS>2</SplitLS>
<OneElfS>2</OneElfS>
<Strict>2</Strict>
<EnumInt>2</EnumInt>
<PlainCh>2</PlainCh>
<Ropi>2</Ropi>
<Rwpi>2</Rwpi>
<wLevel>0</wLevel>
<uThumb>2</uThumb>
<uSurpInc>2</uSurpInc>
<uC99>2</uC99>
<useXO>2</useXO>
<v6Lang>0</v6Lang>
<v6LangP>0</v6LangP>
<vShortEn>2</vShortEn>
<vShortWch>2</vShortWch>
<v6Lto>2</v6Lto>
<v6WtE>2</v6WtE>
<v6Rtti>2</v6Rtti>
<VariousControls>
<MiscControls> </MiscControls>
<Define>__RT_IPC_SOURCE__</Define>
<Undefine> </Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Cads>
</FileArmAds>
</FileOption>
</File>
</Files>
</Group>
<Group>
@ -1489,61 +1604,6 @@
</FileArmAds>
</FileOption>
</File>
<File>
<FileName>cpu_up.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\cpu_up.c</FilePath>
<FileOption>
<CommonProperty>
<UseCPPCompiler>2</UseCPPCompiler>
<RVCTCodeConst>0</RVCTCodeConst>
<RVCTZI>0</RVCTZI>
<RVCTOtherData>0</RVCTOtherData>
<ModuleSelection>0</ModuleSelection>
<IncludeInBuild>1</IncludeInBuild>
<AlwaysBuild>0</AlwaysBuild>
<GenerateAssemblyFile>0</GenerateAssemblyFile>
<AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode>
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<ComprImg>1</ComprImg>
</CommonProperty>
<FileArmAds>
<Cads>
<interw>2</interw>
<Optim>0</Optim>
<oTime>2</oTime>
<SplitLS>2</SplitLS>
<OneElfS>2</OneElfS>
<Strict>2</Strict>
<EnumInt>2</EnumInt>
<PlainCh>2</PlainCh>
<Ropi>2</Ropi>
<Rwpi>2</Rwpi>
<wLevel>0</wLevel>
<uThumb>2</uThumb>
<uSurpInc>2</uSurpInc>
<uC99>2</uC99>
<useXO>2</useXO>
<v6Lang>0</v6Lang>
<v6LangP>0</v6LangP>
<vShortEn>2</vShortEn>
<vShortWch>2</vShortWch>
<v6Lto>2</v6Lto>
<v6WtE>2</v6WtE>
<v6Rtti>2</v6Rtti>
<VariousControls>
<MiscControls> </MiscControls>
<Define>__RT_KERNEL_SOURCE__</Define>
<Undefine> </Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Cads>
</FileArmAds>
</FileOption>
</File>
<File>
<FileName>idle.c</FileName>
<FileType>1</FileType>

13
bsp/ht32/ht32f12366/rtconfig.h
View File

@ -45,7 +45,7 @@
#define RT_USING_CONSOLE
#define RT_CONSOLEBUF_SIZE 128
#define RT_CONSOLE_DEVICE_NAME "usart0"
#define RT_VER_NUM 0x50100
#define RT_VER_NUM 0x50200
#define RT_BACKTRACE_LEVEL_MAX_NR 32
#define RT_USING_HW_ATOMIC
#define RT_USING_CPU_FFS
@ -87,7 +87,9 @@
#define RT_SERIAL_RB_BUFSZ 64
#define RT_USING_I2C
#define RT_USING_I2C_BITOPS
#define RT_USING_ADC
#define RT_USING_SPI
#define RT_USING_WDT
#define RT_USING_PIN
/* Using USB */
@ -193,6 +195,9 @@
/* STM32 HAL & SDK Drivers */
/* Infineon HAL Packages */
/* Kendryte SDK */
@ -257,15 +262,21 @@
/* Hardware Drivers Config */
/* Chip Configuration */
#define SOC_KERNEL
#define CORTEX_M3
#define SOC_HT32F12366
/* Onboard Peripheral Drivers */
/* On-chip Peripheral Drivers */
#define BSP_USING_GPIO
#define BSP_USING_UART
#define BSP_USING_USART0
#define BSP_USING_USART0_NAME "usart0"
/* Board extended module Drivers */

79
bsp/ht32/ht32f52352/.config
View File

@ -35,10 +35,7 @@ CONFIG_IDLE_THREAD_STACK_SIZE=256
# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
# CONFIG_RT_USING_TINY_FFS is not set
# CONFIG_RT_KPRINTF_USING_LONGLONG is not set
CONFIG_RT_USING_DEBUG=y
CONFIG_RT_DEBUGING_COLOR=y
CONFIG_RT_DEBUGING_CONTEXT=y
# CONFIG_RT_DEBUGING_AUTO_INIT is not set
# CONFIG_RT_USING_DEBUG is not set
#
# Inter-Thread communication
@ -76,7 +73,7 @@ CONFIG_RT_USING_DEVICE=y
CONFIG_RT_USING_CONSOLE=y
CONFIG_RT_CONSOLEBUF_SIZE=128
CONFIG_RT_CONSOLE_DEVICE_NAME="usart1"
CONFIG_RT_VER_NUM=0x50100
CONFIG_RT_VER_NUM=0x50200
# CONFIG_RT_USING_STDC_ATOMIC is not set
CONFIG_RT_BACKTRACE_LEVEL_MAX_NR=32
# CONFIG_RT_USING_CACHE is not set
@ -101,11 +98,11 @@ CONFIG_RT_USING_FINSH=y
CONFIG_FINSH_USING_MSH=y
CONFIG_FINSH_THREAD_NAME="tshell"
CONFIG_FINSH_THREAD_PRIORITY=20
CONFIG_FINSH_THREAD_STACK_SIZE=4096
CONFIG_FINSH_THREAD_STACK_SIZE=1024
CONFIG_FINSH_USING_HISTORY=y
CONFIG_FINSH_HISTORY_LINES=5
CONFIG_FINSH_USING_SYMTAB=y
CONFIG_FINSH_CMD_SIZE=80
CONFIG_FINSH_CMD_SIZE=32
CONFIG_MSH_USING_BUILT_IN_COMMANDS=y
CONFIG_FINSH_USING_DESCRIPTION=y
# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
@ -129,7 +126,7 @@ CONFIG_RT_UNAMED_PIPE_NUMBER=64
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_USING_SERIAL_V1=y
# CONFIG_RT_USING_SERIAL_V2 is not set
CONFIG_RT_SERIAL_USING_DMA=y
# CONFIG_RT_SERIAL_USING_DMA is not set
CONFIG_RT_SERIAL_RB_BUFSZ=64
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_CPUTIME is not set
@ -139,7 +136,7 @@ CONFIG_RT_USING_I2C_BITOPS=y
# CONFIG_RT_I2C_BITOPS_DEBUG is not set
# CONFIG_RT_USING_SOFT_I2C is not set
# CONFIG_RT_USING_PHY is not set
# CONFIG_RT_USING_ADC is not set
CONFIG_RT_USING_ADC=y
# CONFIG_RT_USING_DAC is not set
# CONFIG_RT_USING_NULL is not set
# CONFIG_RT_USING_ZERO is not set
@ -157,7 +154,7 @@ CONFIG_RT_USING_SPI=y
# CONFIG_RT_USING_SFUD is not set
# CONFIG_RT_USING_ENC28J60 is not set
# CONFIG_RT_USING_SPI_WIFI is not set
# CONFIG_RT_USING_WDT is not set
CONFIG_RT_USING_WDT=y
# CONFIG_RT_USING_AUDIO is not set
# CONFIG_RT_USING_SENSOR is not set
# CONFIG_RT_USING_TOUCH is not set
@ -269,6 +266,7 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
# CONFIG_PKG_USING_WEBTERMINAL is not set
# CONFIG_PKG_USING_FREEMODBUS is not set
# CONFIG_PKG_USING_NANOPB is not set
# CONFIG_PKG_USING_WIFI_HOST_DRIVER is not set
#
# Wi-Fi
@ -363,6 +361,7 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
# CONFIG_PKG_USING_ZEPHYR_POLLING is not set
# CONFIG_PKG_USING_MATTER_ADAPTATION_LAYER is not set
# CONFIG_PKG_USING_LHC_MODBUS is not set
# CONFIG_PKG_USING_QMODBUS is not set
#
# security packages
@ -496,6 +495,7 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set
# CONFIG_PKG_USING_RT_VSNPRINTF_FULL is not set
# CONFIG_PKG_USING_AUNITY is not set
#
# acceleration: Assembly language or algorithmic acceleration packages
@ -582,9 +582,24 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
#
# STM32 HAL & SDK Drivers
#
# CONFIG_PKG_USING_STM32L4XX_HAL_DRIVER is not set
# CONFIG_PKG_USING_STM32L4_HAL_DRIVER is not set
# CONFIG_PKG_USING_STM32L4_CMSIS_DRIVER is not set
# CONFIG_PKG_USING_STM32WB55_SDK is not set
# CONFIG_PKG_USING_STM32_SDIO is not set
#
# Infineon HAL Packages
#
# CONFIG_PKG_USING_INFINEON_CAT1CM0P is not set
# CONFIG_PKG_USING_INFINEON_CMSIS is not set
# CONFIG_PKG_USING_INFINEON_CORE_LIB is not set
# CONFIG_PKG_USING_INFINEON_MTB_HAL_CAT1 is not set
# CONFIG_PKG_USING_INFINEON_MTB_PDL_CAT1 is not set
# CONFIG_PKG_USING_INFINEON_RETARGET_IO is not set
# CONFIG_PKG_USING_INFINEON_CAPSENSE is not set
# CONFIG_PKG_USING_INFINEON_CSDIDAC is not set
# CONFIG_PKG_USING_INFINEON_SERIAL_FLASH is not set
# CONFIG_PKG_USING_INFINEON_USBDEV is not set
# CONFIG_PKG_USING_BLUETRUM_SDK is not set
# CONFIG_PKG_USING_EMBARC_BSP is not set
# CONFIG_PKG_USING_ESP_IDF is not set
@ -770,6 +785,7 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
#
# Signal Processing and Control Algorithm Packages
#
# CONFIG_PKG_USING_APID is not set
# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
# CONFIG_PKG_USING_QPID is not set
# CONFIG_PKG_USING_UKAL is not set
@ -1071,11 +1087,49 @@ CONFIG_SOC_SERIES_HT32F5=y
#
# Hardware Drivers Config
#
#
# Chip Configuration
#
CONFIG_SOC_KERNEL=y
CONFIG_CORTEX_M0=y
# CONFIG_CORTEX_M3 is not set
# CONFIG_SOC_HT32F0006 is not set
# CONFIG_SOC_HT32F0008 is not set
# CONFIG_SOC_HT32F50241 is not set
# CONFIG_SOC_HT32F50343 is not set
# CONFIG_SOC_HT32F50441 is not set
# CONFIG_SOC_HT32F50452 is not set
# CONFIG_SOC_HT32F52241 is not set
# CONFIG_SOC_HT32F52244 is not set
# CONFIG_SOC_HT32F52253 is not set
# CONFIG_SOC_HT32F52341 is not set
CONFIG_SOC_HT32F52352=y
# CONFIG_SOC_HT32F52354 is not set
# CONFIG_SOC_HT32F52367 is not set
# CONFIG_SOC_HT32F53241 is not set
# CONFIG_SOC_HT32F53252 is not set
# CONFIG_SOC_HT32F54241 is not set
# CONFIG_SOC_HT32F54253 is not set
# CONFIG_SOC_HT32F57341 is not set
# CONFIG_SOC_HT32F57352 is not set
# CONFIG_SOC_HT32F5828 is not set
# CONFIG_SOC_HT32F59041 is not set
# CONFIG_SOC_HT32F59741 is not set
# CONFIG_SOC_HT32F61141 is not set
# CONFIG_SOC_HT32F61245 is not set
# CONFIG_SOC_HT32F61355 is not set
# CONFIG_SOC_HT32F61356 is not set
# CONFIG_SOC_HT32F61357 is not set
# CONFIG_SOC_HT32F61641 is not set
# CONFIG_SOC_HT32F65240 is not set
# CONFIG_SOC_HT32F67051 is not set
# CONFIG_SOC_HT32F67741 is not set
#
# Onboard Peripheral Drivers
#
# CONFIG_BSP_USING_TEST is not set
#
# On-chip Peripheral Drivers
@ -1084,10 +1138,13 @@ CONFIG_BSP_USING_GPIO=y
CONFIG_BSP_USING_UART=y
# CONFIG_BSP_USING_USART0 is not set
CONFIG_BSP_USING_USART1=y
CONFIG_BSP_USING_USART1_NAME="usart1"
# CONFIG_BSP_USING_UART0 is not set
# CONFIG_BSP_USING_UART1 is not set
# CONFIG_BSP_USING_SPI is not set
# CONFIG_BSP_USING_I2C is not set
# CONFIG_BSP_USING_ADC is not set
# CONFIG_BSP_USING_WDT is not set
#
# Board extended module Drivers

7
bsp/ht32/ht32f52352/applications/SConscript
View File

@ -9,7 +9,12 @@ from building import *
cwd = GetCurrentDir()
#创建一个列表，用于保存需要使用到的C文件路径
src = Glob('*c')
#src = Glob('*.c')
src = Split("""
main.c
""")
if GetDepend(['BSP_USING_TEST']):
src += ['test.c']
#创建一个列表，用于保存需要包含的H文件路径
path = [cwd]

716
bsp/ht32/ht32f52352/applications/test.c Normal file
View File

@ -0,0 +1,716 @@
/*
* Copyright (c) 2006-2024, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2024-06-17 QT-one first version
*/
#include "board.h"
#ifdef BSP_USING_TEST
/* Task stack */
#define THREAD_PRIORITY 25
#define THREAD_STACK_SIZE 512
#define THREAD_TIMESLICE 5
/* Test pins */
#define TEST_LED0_PIN GET_PIN(C, 14)
#define TEST_LED1_PIN GET_PIN(C, 15)
#define TEST_LED2_PIN GET_PIN(C, 1)
#define TEST_WAKEUP_PIN GET_PIN(B, 12)
#define TEST_KEY1_PIN GET_PIN(D, 1)
#define TEST_KEY2_PIN GET_PIN(D, 2)
#define TEST_OTHER_PIN GET_PIN(B, 12)
#define TEST_OUTPUT_PIN GET_PIN(C, 1)
#define TEST_INPUT_PIN GET_PIN(D, 1)
#define TEST_INT_PIN GET_PIN(D, 2)
#define TEST_RES_PIN GET_PIN(C, 1)
/* Event flags */
#define TEST_GPIO_INT_ENV (1 << 10)
#define TEST_GPIO_KEY_ENV (1 << 15)
static struct rt_event led_event; /* LED event */
#define TASK_KILL_FLAG (1 << 10)
static struct rt_event task_event; /* Task event */
/* EEPROM Read/Write Data Structure */
typedef union
{
rt_uint8_t data[30];
struct
{
rt_uint8_t write_addr;
char write_date[29];
}in_data;
}eeprom_write_type;
/* Semaphore variables */
static struct rt_semaphore rx_sem;
/* Mutually exclusive variables */
static rt_mutex_t task_mutex = RT_NULL; /* task mutex */
/* device handle */
static rt_device_t serial;
static rt_device_t wdt_dev;
struct rt_i2c_bus_device *i2c_dev;
static struct rt_spi_device *spi_dev;
/* In-file function declarations */
static void sys_run_dir(void *parameter);
static void gpio_output_test(void *parameter);
static void gpio_input_test(void *parameter);
static void key_iqr_handle(void *args);
/* Task registration */
int task_registration(void)
{
/* Create a dynamic mutex */
task_mutex = rt_mutex_create("task_mutex", RT_IPC_FLAG_FIFO);
if (task_mutex == RT_NULL)
{
rt_kprintf("rt_mutex_create error.\n");
return -1;
}
/* Create a task event */
if(rt_event_init(&task_event,"task_event",RT_IPC_FLAG_FIFO) != RT_EOK)
{
rt_kprintf("rt_mutex_create error.\n");
return -1;
}
return 0;
}
INIT_BOARD_EXPORT(task_registration);
/* System operation indicator */
static void sys_run_dir(void *parameter)
{
rt_uint32_t e;
rt_pin_mode(TEST_LED2_PIN, PIN_MODE_OUTPUT);
while(1)
{
if(rt_event_recv(&task_event,TASK_KILL_FLAG,
RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR,
RT_WAITING_NO, &e) == RT_EOK)
{
rt_thread_t tid = rt_thread_self();
rt_thread_delete(tid);
}
rt_pin_write(TEST_LED2_PIN, PIN_LOW);
rt_thread_mdelay(500);
rt_pin_write(TEST_LED2_PIN, PIN_HIGH);
rt_thread_mdelay(500);
}
}
static int sys_run_task(int argc, char *argv[])
{
if(argc == 2)
{
if(rt_strcmp(argv[1],"start") == 0)
{
if(rt_mutex_take(task_mutex, RT_WAITING_NO) != RT_EOK)
{
rt_kprintf("The test thread is occupied.\n");
return -RT_ERROR;
}
else
{
/* Register the system indicator task */
rt_thread_t sys_led_task = rt_thread_create("sys_led_task",
sys_run_dir, RT_NULL,
THREAD_STACK_SIZE,
THREAD_PRIORITY, THREAD_TIMESLICE);
if (sys_led_task != RT_NULL)
rt_thread_startup(sys_led_task);
rt_kprintf("The sys run task is registered.\n");
}
}
else if(rt_strcmp(argv[1],"end") == 0)
{
rt_event_send(&task_event,TASK_KILL_FLAG);
rt_mutex_release(task_mutex);
rt_kprintf("The sys run task has been deleted.\n");
}
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s start\n",__func__);
rt_kprintf("%s end\n",__func__);
return -1;
}
return -1;
}
MSH_CMD_EXPORT(sys_run_task, sys run task operation);
/* Gpio output test */
static void gpio_output_test(void *parameter)
{
rt_uint32_t e;
rt_pin_mode(TEST_OUTPUT_PIN, PIN_MODE_OUTPUT);
while(1)
{
if(rt_event_recv(&task_event,TASK_KILL_FLAG,
RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR,
RT_WAITING_NO, &e) == RT_EOK)
{
rt_thread_t tid = rt_thread_self();
rt_thread_delete(tid);
}
rt_pin_write(TEST_OUTPUT_PIN, PIN_LOW);
rt_thread_mdelay(500);
rt_pin_write(TEST_OUTPUT_PIN, PIN_HIGH);
rt_thread_mdelay(500);
}
}
static int gpio_output_task(int argc, char *argv[])
{
if(argc == 2)
{
if(rt_strcmp(argv[1],"start") == 0)
{
if(rt_mutex_take(task_mutex, RT_WAITING_NO) != RT_EOK)
{
rt_kprintf("The test thread is occupied.\n");
return -RT_ERROR;
}
else
{
/* Gpio output test tasks */
rt_thread_t gpio_output_task = rt_thread_create("gpio_output_task",
gpio_output_test, RT_NULL,
THREAD_STACK_SIZE,
THREAD_PRIORITY, THREAD_TIMESLICE);
if (gpio_output_task != RT_NULL)
rt_thread_startup(gpio_output_task);
rt_kprintf("The gpio output task is registered.\n");
}
}
else if(rt_strcmp(argv[1],"end") == 0)
{
rt_event_send(&task_event,TASK_KILL_FLAG);
rt_mutex_release(task_mutex);
rt_kprintf("The gpio output task has been deleted.\n");
}
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s start\n",__func__);
rt_kprintf("%s end\n",__func__);
return -1;
}
return -1;
}
MSH_CMD_EXPORT(gpio_output_task, gpio output task operation);
/* Gpio input test */
static void key_iqr_handle(void *args)
{
/* gpio iqr fun */
rt_event_send(&led_event,TEST_GPIO_INT_ENV);
}
static void gpio_input_test(void *parameter)
{
uint8_t led_flag = PIN_LOW;
rt_uint32_t e;
rt_pin_mode(TEST_RES_PIN, PIN_MODE_OUTPUT);
rt_pin_write(TEST_RES_PIN, PIN_LOW);
rt_pin_mode(TEST_WAKEUP_PIN,PIN_MODE_INPUT_PULLDOWN);
rt_pin_mode(TEST_INPUT_PIN,PIN_MODE_INPUT_PULLUP);
rt_pin_attach_irq(TEST_INT_PIN,PIN_IRQ_MODE_FALLING,key_iqr_handle,RT_NULL);
rt_pin_irq_enable(TEST_INT_PIN,PIN_IRQ_ENABLE);
if(rt_event_init(&led_event,"led_event",RT_IPC_FLAG_FIFO) != RT_EOK)
{
rt_kprintf("rt_mutex_create error.\n");
}
while(1)
{
if(PIN_LOW == rt_pin_read(TEST_INPUT_PIN))
{
while(PIN_LOW == rt_pin_read(TEST_INPUT_PIN));
rt_event_send(&led_event,TEST_GPIO_KEY_ENV);
}
if(rt_event_recv(&led_event,(TEST_GPIO_INT_ENV|TEST_GPIO_KEY_ENV),
RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR,
RT_WAITING_NO, &e) == RT_EOK)
{
led_flag = (led_flag == PIN_LOW)?PIN_HIGH:PIN_LOW;
rt_pin_write(TEST_RES_PIN, led_flag);
}
if(rt_event_recv(&task_event,TASK_KILL_FLAG,
RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR,
RT_WAITING_NO, &e) == RT_EOK)
{
rt_thread_t tid = rt_thread_self();
rt_thread_delete(tid);
}
}
}
static int gpio_input_task(int argc, char *argv[])
{
if(argc == 2)
{
if(rt_strcmp(argv[1],"start") == 0)
{
if(rt_mutex_take(task_mutex, RT_WAITING_NO) != RT_EOK)
{
rt_kprintf("The test thread is occupied.\n");
return -RT_ERROR;
}
/* Gpio input test tasks */
rt_thread_t gpio_input_task = rt_thread_create("gpio_input_task",
gpio_input_test, RT_NULL,
THREAD_STACK_SIZE,
THREAD_PRIORITY, THREAD_TIMESLICE);
if (gpio_input_task != RT_NULL)
rt_thread_startup(gpio_input_task);
rt_kprintf("The gpio input task is registered.\n");
}
else if(rt_strcmp(argv[1],"end") == 0)
{
rt_event_send(&task_event,TASK_KILL_FLAG);
rt_mutex_release(task_mutex);
rt_kprintf("The gpio input task has been deleted.\n");
}
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s start\n",__func__);
rt_kprintf("%s end\n",__func__);
return -1;
}
return -1;
}
MSH_CMD_EXPORT(gpio_input_task, gpio input task operation);
/* uart test */
static rt_err_t uart_iqr_handle(rt_device_t dev, rt_size_t size)
{
/* Serial port callback function */
rt_sem_release(&rx_sem);
return RT_EOK;
}
static void uart_thread(void *parameter)
{
char ch;
while (1)
{
/* Serial port readout */
while (rt_device_read(serial, -1, &ch, 1) != 1)
{
/* semaphore blocking */
rt_sem_take(&rx_sem, RT_WAITING_FOREVER);
}
/* Output the data obtained from the serial port */
rt_device_write(serial, 0, &ch, 1);
rt_device_write(serial,0,"\n",1);
}
}
static int uart_task(int argc, char *argv[])
{
rt_err_t ret = RT_EOK;
char uart_name[RT_NAME_MAX] = "uart1";
char str[] = "hello RT-Thread!\r\n";
if (argc == 3)
{
if(rt_strcmp(argv[2],"start") == 0)
{
rt_strncpy(uart_name, argv[1], RT_NAME_MAX);
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s <uart name> start\n",__func__);
rt_kprintf("%s <uart name> end\n",__func__);
return -1;
}
}
else if(argc == 2)
{
if(rt_strcmp(argv[1],"start") == 0)
{
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s start\n",__func__);
rt_kprintf("%s end\n",__func__);
return -1;
}
}
else
{
rt_kprintf("Incomplete instruction.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s <uart name> start/end\n",__func__);
rt_kprintf("or\n");
rt_kprintf("%s start/end\n",__func__);
return -1;
}
/* Find Serial Devices */
serial = rt_device_find(uart_name);
if (!serial)
{
rt_kprintf("find %s failed!\n", uart_name);
return -RT_ERROR;
}
/* Initializing a Signal */
rt_sem_init(&rx_sem, "rx_sem", 0, RT_IPC_FLAG_FIFO);
/* Open the serial device with read/write and interrupt reception. */
rt_device_open(serial, RT_DEVICE_OFLAG_RDWR | RT_DEVICE_FLAG_INT_RX);
/* Setting the receive callback function */
rt_device_set_rx_indicate(serial, uart_iqr_handle);
/* Send String */
rt_device_write(serial, 0, str, (sizeof(str) - 1));
/* Creating a serial thread */
rt_thread_t thread = rt_thread_create("serial",
uart_thread, RT_NULL,
THREAD_STACK_SIZE,
THREAD_PRIORITY, THREAD_TIMESLICE);
if (thread != RT_NULL)
rt_thread_startup(thread);
return ret;
}
MSH_CMD_EXPORT(uart_task, uart device sample);
/* hw/sw iic test */
static void i2c_thread(void *parameter)
{
uint8_t write_addr = 0x00;
eeprom_write_type eeprom_date;
char send_dat[] = "i2c write eeprom";
char read_dat[20] = {0};
struct rt_i2c_msg msg1[2];
eeprom_date.in_data.write_addr = write_addr;
rt_strncpy(eeprom_date.in_data.write_date, send_dat, rt_strlen(send_dat));
msg1[0].addr = 0x51;
msg1[0].flags = RT_I2C_WR;
msg1[0].buf = eeprom_date.data;
msg1[0].len = (rt_strlen(send_dat) + 1);
if (rt_i2c_transfer(i2c_dev, msg1, 1) == 1)
{
rt_kprintf("eeprom write succeed!\n");
rt_kprintf("write_dat = %s\r\n",send_dat);
}
else
{
rt_kprintf("eeprom write error!\n");
}
msg1[0].addr = 0x51;
msg1[0].flags = RT_I2C_WR;
msg1[0].buf = &write_addr;
msg1[0].len = 1;
msg1[1].addr = 0x51;
msg1[1].flags = RT_I2C_RD;
msg1[1].buf = (uint8_t *)read_dat;
msg1[1].len = rt_strlen(send_dat);
if (rt_i2c_transfer(i2c_dev, msg1, 2) == 2)
{
rt_kprintf("eeprom read succeed!\n");
rt_kprintf("read_dat = %s\r\n",read_dat);
}
else
{
rt_kprintf("eeprom read error!\n");
}
}
static int i2c_task(int argc, char *argv[])
{
rt_err_t ret = RT_EOK;
char i2c_name[RT_NAME_MAX] = "hw_i2c1";
if (argc == 3)
{
if(rt_strcmp(argv[2],"start") == 0)
{
rt_strncpy(i2c_name, argv[1], RT_NAME_MAX);
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s <i2c name> start\n",__func__);
rt_kprintf("%s <i2c name> end\n",__func__);
return -1;
}
}
else if(argc == 2)
{
if(rt_strcmp(argv[1],"start") == 0)
{
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s start\n",__func__);
rt_kprintf("%s end\n",__func__);
return -1;
}
}
else
{
rt_kprintf("Incomplete instruction.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s <i2c name> start/end\n",__func__);
rt_kprintf("or\n");
rt_kprintf("%s start/end\n",__func__);
return -1;
}
/* Find I2C Devices */
i2c_dev = (struct rt_i2c_bus_device *)rt_device_find(i2c_name);
if (!i2c_dev)
{
rt_kprintf("find %s failed!\n", i2c_name);
return -RT_ERROR;
}
/* Execute I2C read/write eeprom function */
i2c_thread(RT_NULL);
return ret;
}
MSH_CMD_EXPORT(i2c_task, i2c device sample);
/* spi test */
static void spi_thread(void *parameter)
{
rt_uint8_t w25x_read_id = 0x9F;
rt_uint8_t id[5] = {0};
/* Use rt_spi_send_then_recv() to send commands to read IDs */
rt_spi_take_bus(spi_dev);
rt_spi_take(spi_dev);
rt_spi_send_then_recv(spi_dev, &w25x_read_id, 1, id, 3);
rt_spi_release(spi_dev);
rt_spi_release_bus(spi_dev);
rt_kprintf("use rt_spi_send_then_recv() read MX25L6406 ID is:0x%X%X%X\n", id[0], id[1], id[2]);
}
static int spi_task(int argc, char *argv[])
{
rt_err_t ret = RT_EOK;
struct rt_spi_configuration cfg;
char spi_name[RT_NAME_MAX] = "spi1";
char flash_name[RT_NAME_MAX] = "flash";
if (argc == 3)
{
if(rt_strcmp(argv[2],"start") == 0)
{
rt_strncpy(spi_name, argv[1], RT_NAME_MAX);
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s <spi name> start\n",__func__);
rt_kprintf("%s <spi name> end\n",__func__);
return -1;
}
}
else if(argc == 2)
{
if(rt_strcmp(argv[1],"start") == 0)
{
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s start\n",__func__);
rt_kprintf("%s end\n",__func__);
return -1;
}
}
else
{
rt_kprintf("Incomplete instruction.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s <spi name> start/end\n",__func__);
rt_kprintf("or\n");
rt_kprintf("%s start/end\n",__func__);
return -1;
}
/* Binding CS pin */
ret = rt_hw_spi_device_attach(spi_name,flash_name,HT_GPIOD,GPIO_PIN_0);
if(ret != RT_EOK)
{
rt_kprintf("Failed CS pin binding for %s!\n", spi_name);
return -RT_ERROR;
}
/* Find flash devices */
spi_dev = (struct rt_spi_device*)rt_device_find(flash_name);
if (!spi_dev)
{
rt_kprintf("find %s failed!\n", spi_name);
return -RT_ERROR;
}
/* Configuring the SPI Bus */
cfg.data_width = 8;
cfg.mode = RT_SPI_MASTER | RT_SPI_MODE_3 | RT_SPI_MSB;
cfg.max_hz = 8;
rt_spi_configure(spi_dev,&cfg);
rt_kprintf("SPI0 initialization succeeded!\n");
/* Execute flash read and write functions */
spi_thread(RT_NULL);
rt_device_unregister((rt_device_t)spi_dev);
return ret;
}
MSH_CMD_EXPORT(spi_task, spi device sample);
/* adc test */
static void adc_test(void *parameter)
{
rt_uint32_t adc0_ch6_val,adc0_ch7_val;
rt_adc_device_t adc_dev = (rt_adc_device_t)rt_device_find("adc0");
if (!adc_dev)
{
rt_kprintf("No ADC0 device found!\n");
}
else
{
rt_adc_enable(adc_dev,ADC_CH_6);
rt_adc_enable(adc_dev,ADC_CH_7);
}
while(1)
{
adc0_ch6_val = rt_adc_read(adc_dev,6);
adc0_ch7_val = rt_adc_read(adc_dev,7);
rt_kprintf("adc0_ch6_val = %d\n",adc0_ch6_val);
rt_kprintf("adc0_ch7_val = %d\n",adc0_ch7_val);
rt_thread_mdelay(50);
}
}
static int adc_task(int argc, char *argv[])
{
if(argc == 2)
{
if(rt_strcmp(argv[1],"start") == 0)
{
/* Adc test tasks */
rt_thread_t adc_task = rt_thread_create("adc_task",
adc_test, RT_NULL,
THREAD_STACK_SIZE,
THREAD_PRIORITY, THREAD_TIMESLICE);
if (adc_task != RT_NULL)
rt_thread_startup(adc_task);
rt_kprintf("The adc task is registered.\n");
}
else if(rt_strcmp(argv[1],"end") == 0)
{
rt_event_send(&task_event,TASK_KILL_FLAG);
rt_kprintf("The adc task has been deleted.\n");
}
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s start\n",__func__);
rt_kprintf("%s end\n",__func__);
return -1;
}
return -1;
}
MSH_CMD_EXPORT(adc_task, adc task operation);
/* wdt test */
static void wdt_test(void)
{
rt_device_control(wdt_dev, RT_DEVICE_CTRL_WDT_KEEPALIVE, RT_NULL);
}
static int wdt_task(int argc, char *argv[])
{
rt_err_t ret = -RT_ERROR;
rt_uint16_t wdt_time = 5;
char dev_name[] = "wdt";
if(argc == 2)
{
if(rt_strcmp(argv[1],"start") == 0)
{
/* Find wdt devices */
wdt_dev = rt_device_find(dev_name);
if(wdt_dev == RT_NULL)
{
rt_kprintf("No corresponding equipment found.\n");
return -1;
}
/* Configuring the Watchdog */
ret = rt_device_control(wdt_dev, RT_DEVICE_CTRL_WDT_SET_TIMEOUT, &wdt_time);
if(ret != RT_EOK)
{
rt_kprintf("wdt configuration failed.\n");
return -1;
}
/* Start the Watchdog */
ret = rt_device_control(wdt_dev, RT_DEVICE_CTRL_WDT_START, RT_NULL);
if(ret != RT_EOK)
{
rt_kprintf("wdt start failed.\n");
return -1;
}
/* Setting up idle threads */
rt_thread_idle_sethook(wdt_test);
rt_kprintf("Watchdog started successfully.\n");
}
else if(rt_strcmp(argv[1],"stop") == 0)
{
/* Verify device handle */
if(wdt_dev == RT_NULL)
{
rt_kprintf("Device handle does not exist.\n");
return -1;
}
/* Stop the Watchdog */
ret = rt_device_control(wdt_dev, RT_DEVICE_CTRL_WDT_STOP, RT_NULL);
if(ret != RT_EOK)
{
rt_kprintf("wdt start failed.\n");
return -1;
}
/* Hook function to delete idle threads */
rt_thread_idle_delhook(wdt_test);
rt_kprintf("Watchdog has stopped.\n");
}
}
else
{
rt_kprintf("Necessary parameters are missing.\n");
rt_kprintf("You can use the following commands.\n");
rt_kprintf("%s start\n",__func__);
rt_kprintf("%s stop\n",__func__);
return -1;
}
return -1;
}
MSH_CMD_EXPORT(wdt_task, wdt task operation);
#endif /* BSP_USING_TEST */

330
bsp/ht32/ht32f52352/board/Kconfig
View File

@ -1,73 +1,311 @@
menu "Hardware Drivers Config"
config SOC_HT32F52352
bool
select SOC_SERIES_HT32F5
select RT_USING_COMPONENTS_INIT
select RT_USING_USER_MAIN
default y
menu "Chip Configuration"
config SOC_KERNEL
bool
select SOC_SERIES_HT32F5 if CORTEX_M0
select SOC_SERIES_HT32F1 if CORTEX_M3
select RT_USING_COMPONENTS_INIT
select RT_USING_USER_MAIN
default y
choice
prompt "Select the kernel"
default CORTEX_M0
config CORTEX_M0
bool "CORTEX_M0"
config CORTEX_M3
bool "CORTEX_M3"
endchoice
choice
prompt "Select the chip you are using"
depends on CORTEX_M0
default HT32F52352
config SOC_HT32F0006
bool "HT32F0006"
config SOC_HT32F0008
bool "HT32F0008"
config SOC_HT32F50241
bool "HT32F50241"
config SOC_HT32F50343
bool "HT32F50343"
config SOC_HT32F50441
bool "HT32F50441"
config SOC_HT32F50452
bool "HT32F50452"
config SOC_HT32F52241
bool "HT32F52241"
config SOC_HT32F52244
bool "HT32F52244"
config SOC_HT32F52253
bool "HT32F52253"
config SOC_HT32F52341
bool "HT32F52341"
config SOC_HT32F52352
bool "HT32F52352"
config SOC_HT32F52354
bool "HT32F52354"
config SOC_HT32F52367
bool "HT32F52367"
config SOC_HT32F53241
bool "HT32F53241"
config SOC_HT32F53252
bool "HT32F53252"
config SOC_HT32F54241
bool "HT32F54241"
config SOC_HT32F54253
bool "HT32F54253"
config SOC_HT32F57341
bool "HT32F57341"
config SOC_HT32F57352
bool "HT32F57352"
config SOC_HT32F5828
bool "HT32F5828"
config SOC_HT32F59041
bool "HT32F59041"
config SOC_HT32F59741
bool "HT32F59741"
config SOC_HT32F61141
bool "HT32F61141"
config SOC_HT32F61245
bool "HT32F61245"
config SOC_HT32F61355
bool "HT32F61355"
config SOC_HT32F61356
bool "HT32F61356"
config SOC_HT32F61357
bool "HT32F61357"
config SOC_HT32F61641
bool "HT32F61641"
config SOC_HT32F65240
bool "HT32F65240"
config SOC_HT32F67051
bool "HT32F67051"
config SOC_HT32F67741
bool "HT32F67741"
endchoice
choice
prompt "Select the chip you are using"
depends on CORTEX_M3
default HT32F52352
config SOC_HT32F1654
bool "HT32F1654"
config SOC_HT32F1656
bool "HT32F1656"
config SOC_HT32F12345
bool "HT32F12345"
config SOC_HT32F12364
bool "HT32F12364"
config SOC_HT32F12366
bool "HT32F12366"
endchoice
endmenu
menu "Onboard Peripheral Drivers"
config BSP_USING_TEST
bool "Enable test"
default n
if RT_USING_CONSOLE
config RT_CONSOLE_DEVICE_NAME
string "the device name for console"
default "usart1"
endif
endmenu
menu "On-chip Peripheral Drivers"
config BSP_USING_GPIO
config BSP_USING_GPIO
bool "Enable GPIO"
select RT_USING_PIN
select RT_USING_PIN if BSP_USING_GPIO
default n
    menuconfig BSP_USING_UART
menuconfig BSP_USING_UART
bool "Enable UART"
default n
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_USART0
bool "Enable USART0"
default n
config BSP_USING_USART0
bool "Enable USART0"
default n
config BSP_USING_USART0_NAME
depends on BSP_USING_USART0
string "usart0 bus name"
default "usart0"
config BSP_USING_USART1
bool "Enable USART1"
default n
config BSP_USING_USART1
bool "Enable USART1"
default n
config BSP_USING_USART1_NAME
depends on BSP_USING_USART1
string "usart1 bus name"
default "usart1"
config BSP_USING_UART0
bool "Enable UART0"
default n
config BSP_USING_UART0
bool "Enable UART0"
default n
config BSP_USING_UART0_NAME
depends on BSP_USING_UART0
string "uart0 bus name"
default "uart0"
config BSP_USING_UART1
bool "Enable UART1"
default n
        endif
config BSP_USING_UART1
bool "Enable UART1"
default n
config BSP_USING_UART1_NAME
depends on BSP_USING_UART1
string "uart1 bus name"
default "uart1"
endif
menuconfig BSP_USING_SPI
bool "Enable SPI Bus"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI0
bool "Enable SPI0 Bus"
default n
menuconfig BSP_USING_SPI
bool "Enable SPI Bus"
default n
select RT_USING_SPI if BSP_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI0
bool "Enable SPI0 Bus"
default n
config BSP_USING_SPI0_NAME
depends on BSP_USING_SPI0
string "spi0 bus name"
default "spi0"
config BSP_USING_SPI1
bool "Enable SPI1 Bus"
default n
endif
config BSP_USING_SPI1
bool "Enable SPI1 Bus"
default n
config BSP_USING_SPI1_NAME
depends on BSP_USING_SPI1
string "spi1 bus name"
default "spi1"
endif
menuconfig BSP_USING_I2C
bool "Enable I2C Bus"
default n
select RT_USING_I2C
if BSP_USING_I2C
config BSP_USING_I2C0
bool "Enable I2C0 Bus"
default n
menuconfig BSP_USING_I2C
bool "Enable I2C Bus"
default n
if BSP_USING_I2C
menuconfig BSP_USING_I2C_HW
bool "Enable I2C Bus(hardware)"
default n
select RT_USING_I2C if BSP_USING_I2C_HW
if BSP_USING_I2C_HW
config BSP_USING_I2C0_HW
bool "Enable Hardware I2C0 Bus"
default n
config BSP_USING_I2C0_HW_NAME
depends on BSP_USING_I2C0_HW
string "hardware i2c0 name"
default "hw_i2c0"
config BSP_USING_I2C1
bool "Enable I2C1 Bus"
default n
endif
config BSP_USING_I2C1_HW
bool "Enable Hardware I2C1 Bus"
default n
config BSP_USING_I2C1_HW_NAME
depends on BSP_USING_I2C1_HW
string "hardware i2c1 name"
default "hw_i2c1"
endif
menuconfig BSP_USING_I2C_SW
bool "Enable I2C Bus(software)"
default n
select BSP_USING_GPIO if BSP_USING_I2C_SW
select RT_USING_I2C if BSP_USING_I2C_SW
if BSP_USING_I2C_SW
config BSP_USING_I2C0_SW
bool "Enable Software I2C0 Bus"
default n
config BSP_USING_I2C0_SW_NAME
depends on BSP_USING_I2C0_SW
string "software i2c0 name"
default "sw_i2c0"
if BSP_USING_I2C0_SW
config BSP_I2C0_SLC_PIN
int "i2c0 slc pin number"
range 0 51
default 22
config BSP_I2C0_SDA_PIN
int "i2c0 sda pin number"
range 0 51
default 23
endif
config BSP_USING_I2C1_SW
bool "Enable Software I2C1 Bus"
default n
config BSP_USING_I2C1_SW_NAME
depends on BSP_USING_I2C1_SW
string "software i2c1 name"
default "sw_i2c1"
if BSP_USING_I2C1_SW
config BSP_I2C1_SLC_PIN
int "i2c1 slc pin number"
range 0 51
default 24
config BSP_I2C1_SDA_PIN
int "i2c1 sda pin number"
range 0 51
default 25
endif
config BSP_USING_I2C2_SW
bool "Enable Software I2C2 Bus"
default n
config BSP_USING_I2C2_SW_NAME
depends on BSP_USING_I2C2_SW
string "software i2c2 name"
default "sw_i2c2"
if BSP_USING_I2C2_SW
config BSP_I2C2_SLC_PIN
int "i2c2 slc pin number"
range 0 51
default 26
config BSP_I2C2_SDA_PIN
int "i2c2 sda pin number"
range 0 51
default 27
endif
endif
endif
menuconfig BSP_USING_ADC
bool "Enable ADC"
default n
select RT_USING_ADC if BSP_USING_ADC
if BSP_USING_ADC
config BSP_USING_ADC0
bool "Enable ADC0"
default n
config BSP_USING_ADC0_NAME
depends on BSP_USING_ADC0
string "adc0 device name"
default "adc0"
config BSP_USING_ADC1
bool "Enable ADC1"
depends on SOC_HT32F65240
default n
config BSP_USING_ADC1_NAME
depends on BSP_USING_ADC1
string "adc1 device name"
default "adc1"
endif
menuconfig BSP_USING_WDT
bool "Enable WDT"
default n
select RT_USING_WDT if BSP_USING_WDT
config BSP_USING_WDT_NAME
depends on BSP_USING_WDT
string "wdt device name"
default "wdt"
endmenu
menu "Board extended module Drivers"

8
bsp/ht32/ht32f52352/board/inc/board.h
View File

@ -19,18 +19,10 @@
#include "drv_gpio.h"
#endif
#ifdef BSP_USING_UART
#include "drv_usart.h"
#endif
#ifdef BSP_USING_SPI
#include "drv_spi.h"
#endif
#ifdef BSP_USING_I2C
#include "drv_i2c.h"
#endif
#ifdef __cplusplus
extern "C" {
#endif

160
bsp/ht32/ht32f52352/board/inc/ht32_msp.h
View File

@ -133,14 +133,14 @@ extern "C" {
#define HTCFG_SPI1_IPN SPI1
#define _HTCFG_SPI1_SCK_GPIOX A
#define _HTCFG_SPI1_SCK_GPION 15
#define _HTCFG_SPI1_SCK_GPIOX C
#define _HTCFG_SPI1_SCK_GPION 5
#define _HTCFG_SPI1_MISO_GPIOX B
#define _HTCFG_SPI1_MISO_GPION 1
#define _HTCFG_SPI1_MISO_GPIOX C
#define _HTCFG_SPI1_MISO_GPION 9
#define _HTCFG_SPI1_MOSI_GPIOX B
#define _HTCFG_SPI1_MOSI_GPION 0
#define _HTCFG_SPI1_MOSI_GPIOX C
#define _HTCFG_SPI1_MOSI_GPION 8
#define HTCFG_SPI1_SCK_GPIO_CLK STRCAT2(P, _HTCFG_SPI1_SCK_GPIOX)
#define HTCFG_SPI1_SCK_GPIO_ID STRCAT2(GPIO_P, _HTCFG_SPI1_SCK_GPIOX)
@ -158,8 +158,8 @@ extern "C" {
#endif
/* I2C gpio */
#ifdef BSP_USING_I2C
#ifdef BSP_USING_I2C0
#ifdef BSP_USING_I2C_HW
#ifdef BSP_USING_I2C0_HW
#define HTCFG_I2C0_IPN I2C0
@ -178,7 +178,7 @@ extern "C" {
#define HTCFG_I2C0_SDA_GPIO_PIN STRCAT2(GPIO_PIN_, _HTCFG_I2C0_SDA_GPION)
#endif
#ifdef BSP_USING_I2C1
#ifdef BSP_USING_I2C1_HW
#define HTCFG_I2C1_IPN I2C1
@ -199,9 +199,149 @@ extern "C" {
#endif
#endif
/* ADC gpio */
#ifdef BSP_USING_ADC
#ifdef BSP_USING_ADC0
#define HTCFG_ADC0_IPN ADC0
#define _HTCFG_ADC0CH0_GPIOX A
#define _HTCFG_ADC0CH0_AFION 0
#define _HTCFG_ADC0CH1_GPIOX A
#define _HTCFG_ADC0CH1_AFION 1
#define _HTCFG_ADC0CH2_GPIOX A
#define _HTCFG_ADC0CH2_AFION 2
#define _HTCFG_ADC0CH3_GPIOX A
#define _HTCFG_ADC0CH3_AFION 3
#define _HTCFG_ADC0CH4_GPIOX A
#define _HTCFG_ADC0CH4_AFION 4
#define _HTCFG_ADC0CH5_GPIOX A
#define _HTCFG_ADC0CH5_AFION 5
#define _HTCFG_ADC0CH6_GPIOX A
#define _HTCFG_ADC0CH6_AFION 6
#define _HTCFG_ADC0CH7_GPIOX A
#define _HTCFG_ADC0CH7_AFION 7
#define _HTCFG_ADC0CH8_GPIOX C
#define _HTCFG_ADC0CH8_AFION 4
#define _HTCFG_ADC0CH9_GPIOX C
#define _HTCFG_ADC0CH9_AFION 5
#define _HTCFG_ADC0CH10_GPIOX C
#define _HTCFG_ADC0CH10_AFION 8
#define _HTCFG_ADC0CH11_GPIOX C
#define _HTCFG_ADC0CH11_AFION 9
#define _HTCFG_ADC0CH12_GPIOX C
#define _HTCFG_ADC0CH12_AFION 1
#define _HTCFG_ADC0CH13_GPIOX C
#define _HTCFG_ADC0CH13_AFION 1
#define _HTCFG_ADC0CH14_GPIOX C
#define _HTCFG_ADC0CH14_AFION 1
#define _HTCFG_ADC0CH15_GPIOX C
#define _HTCFG_ADC0CH15_AFION 1
#define HTCFG_ADC0CH0_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH0_GPIOX)
#define HTCFG_ADC0CH1_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH1_GPIOX)
#define HTCFG_ADC0CH2_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH2_GPIOX)
#define HTCFG_ADC0CH3_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH3_GPIOX)
#define HTCFG_ADC0CH4_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH4_GPIOX)
#define HTCFG_ADC0CH5_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH5_GPIOX)
#define HTCFG_ADC0CH6_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH6_GPIOX)
#define HTCFG_ADC0CH7_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH7_GPIOX)
#define HTCFG_ADC0CH8_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH8_GPIOX)
#define HTCFG_ADC0CH9_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH9_GPIOX)
#define HTCFG_ADC0CH10_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH10_GPIOX)
#define HTCFG_ADC0CH11_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH11_GPIOX)
#define HTCFG_ADC0CH12_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH12_GPIOX)
#define HTCFG_ADC0CH13_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH13_GPIOX)
#define HTCFG_ADC0CH14_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH14_GPIOX)
#define HTCFG_ADC0CH15_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC0CH15_GPIOX)
#define HTCFG_ADC0CH0_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH0_AFION)
#define HTCFG_ADC0CH1_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH1_AFION)
#define HTCFG_ADC0CH2_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH2_AFION)
#define HTCFG_ADC0CH3_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH3_AFION)
#define HTCFG_ADC0CH4_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH4_AFION)
#define HTCFG_ADC0CH5_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH5_AFION)
#define HTCFG_ADC0CH6_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH6_AFION)
#define HTCFG_ADC0CH7_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH7_AFION)
#define HTCFG_ADC0CH8_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH8_AFION)
#define HTCFG_ADC0CH9_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH9_AFION)
#define HTCFG_ADC0CH10_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH10_AFION)
#define HTCFG_ADC0CH11_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH11_AFION)
#define HTCFG_ADC0CH12_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH12_AFION)
#define HTCFG_ADC0CH13_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH13_AFION)
#define HTCFG_ADC0CH14_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH14_AFION)
#define HTCFG_ADC0CH15_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC0CH15_AFION)
#endif
#ifdef BSP_USING_ADC1
#define HTCFG_ADC1_IPN ADC1
#define _HTCFG_ADC1CH0_GPIOX B
#define _HTCFG_ADC1CH0_AFION 8
#define _HTCFG_ADC1CH1_GPIOX A
#define _HTCFG_ADC1CH1_AFION 0
#define _HTCFG_ADC1CH2_GPIOX A
#define _HTCFG_ADC1CH2_AFION 1
#define _HTCFG_ADC1CH3_GPIOX A
#define _HTCFG_ADC1CH3_AFION 2
#define _HTCFG_ADC1CH4_GPIOX A
#define _HTCFG_ADC1CH4_AFION 3
#define _HTCFG_ADC1CH5_GPIOX A
#define _HTCFG_ADC1CH5_AFION 4
#define _HTCFG_ADC1CH6_GPIOX A
#define _HTCFG_ADC1CH6_AFION 5
#define _HTCFG_ADC1CH7_GPIOX A
#define _HTCFG_ADC1CH7_AFION 6
#define HTCFG_ADC1CH0_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC1CH0_GPIOX)
#define HTCFG_ADC1CH1_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC1CH1_GPIOX)
#define HTCFG_ADC1CH2_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC1CH2_GPIOX)
#define HTCFG_ADC1CH3_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC1CH3_GPIOX)
#define HTCFG_ADC1CH4_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC1CH4_GPIOX)
#define HTCFG_ADC1CH5_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC1CH5_GPIOX)
#define HTCFG_ADC1CH6_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC1CH6_GPIOX)
#define HTCFG_ADC1CH7_GPIO_ID STRCAT2(GPIO_P, _HTCFG_ADC1CH7_GPIOX)
#define HTCFG_ADC1CH0_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC1CH0_AFION)
#define HTCFG_ADC1CH1_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC1CH1_AFION)
#define HTCFG_ADC1CH2_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC1CH2_AFION)
#define HTCFG_ADC1CH3_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC1CH3_AFION)
#define HTCFG_ADC1CH4_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC1CH4_AFION)
#define HTCFG_ADC1CH5_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC1CH5_AFION)
#define HTCFG_ADC1CH6_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC1CH6_AFION)
#define HTCFG_ADC1CH7_AFIO_PIN STRCAT2(AFIO_PIN_, _HTCFG_ADC1CH7_AFION)
#endif
#endif
void ht32_usart_gpio_init(void *instance);
void ht32_spi_gpio_init(void *instance);
void ht32_i2c_gpio_init(void *instance);
void ht32_hardware_i2c_gpio_init(void *instance);
void ht32_adc_gpio_init(void *instance,int8_t channel);
#ifdef __cplusplus
}

121
bsp/ht32/ht32f52352/board/src/ht32_msp.c
View File

@ -107,12 +107,12 @@ void ht32_spi_gpio_init(void *instance)
#endif
/* GPIO configuration for I2C */
#ifdef BSP_USING_I2C
void ht32_i2c_gpio_init(void *instance)
#ifdef BSP_USING_I2C_HW
void ht32_hardware_i2c_gpio_init(void *instance)
{
CKCU_PeripClockConfig_TypeDef CKCUClock = {{0}};
HT_I2C_TypeDef *i2c_x = (HT_I2C_TypeDef *)instance;
#ifdef BSP_USING_I2C0
#ifdef BSP_USING_I2C0_HW
if (HT_I2C0 == i2c_x)
{
CKCUClock.Bit.HTCFG_I2C0_SCL_GPIO_CLK = 1;
@ -123,7 +123,7 @@ void ht32_i2c_gpio_init(void *instance)
AFIO_GPxConfig(HTCFG_I2C0_SDA_GPIO_ID, HTCFG_I2C0_SDA_GPIO_PIN, AFIO_FUN_I2C);
}
#endif
#ifdef BSP_USING_I2C1
#ifdef BSP_USING_I2C1_HW
if (HT_I2C1 == i2c_x)
{
CKCUClock.Bit.HTCFG_I2C1_SCL_GPIO_CLK = 1;
@ -136,3 +136,116 @@ void ht32_i2c_gpio_init(void *instance)
#endif
}
#endif
/* GPIO configuration for ADC */
#ifdef BSP_USING_ADC
void ht32_adc_gpio_init(void *instance,int8_t channel)
{
CKCU_PeripClockConfig_TypeDef CKCUClock = {{ 0 }};
HT_ADC_TypeDef *adc_x = (HT_ADC_TypeDef *)instance;
#ifdef BSP_USING_ADC0
if (HT_ADC0 == adc_x)
{
/* Enable peripheral clock */
CKCUClock.Bit.AFIO = 1;
CKCUClock.Bit.ADC0 = 1;
CKCU_PeripClockConfig(CKCUClock, ENABLE);
/* Configure AFIO mode as ADC function */
switch(channel)
{
case 0:
AFIO_GPxConfig(HTCFG_ADC0CH0_GPIO_ID, HTCFG_ADC0CH0_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 1:
AFIO_GPxConfig(HTCFG_ADC0CH1_GPIO_ID, HTCFG_ADC0CH1_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 2:
AFIO_GPxConfig(HTCFG_ADC0CH2_GPIO_ID, HTCFG_ADC0CH2_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 3:
AFIO_GPxConfig(HTCFG_ADC0CH3_GPIO_ID, HTCFG_ADC0CH3_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 4:
AFIO_GPxConfig(HTCFG_ADC0CH4_GPIO_ID, HTCFG_ADC0CH4_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 5:
AFIO_GPxConfig(HTCFG_ADC0CH5_GPIO_ID, HTCFG_ADC0CH5_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 6:
AFIO_GPxConfig(HTCFG_ADC0CH6_GPIO_ID, HTCFG_ADC0CH6_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 7:
AFIO_GPxConfig(HTCFG_ADC0CH7_GPIO_ID, HTCFG_ADC0CH7_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 8:
AFIO_GPxConfig(HTCFG_ADC0CH8_GPIO_ID, HTCFG_ADC0CH8_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 9:
AFIO_GPxConfig(HTCFG_ADC0CH9_GPIO_ID, HTCFG_ADC0CH9_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 10:
AFIO_GPxConfig(HTCFG_ADC0CH10_GPIO_ID, HTCFG_ADC0CH10_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 11:
AFIO_GPxConfig(HTCFG_ADC0CH11_GPIO_ID, HTCFG_ADC0CH11_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 12:
AFIO_GPxConfig(HTCFG_ADC0CH12_GPIO_ID, HTCFG_ADC0CH12_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 13:
AFIO_GPxConfig(HTCFG_ADC0CH13_GPIO_ID, HTCFG_ADC0CH13_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 14:
AFIO_GPxConfig(HTCFG_ADC0CH14_GPIO_ID, HTCFG_ADC0CH14_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 15:
AFIO_GPxConfig(HTCFG_ADC0CH15_GPIO_ID, HTCFG_ADC0CH15_AFIO_PIN, AFIO_FUN_ADC0);
break;
default:
break;
}
}
#endif
#ifdef BSP_USING_ADC1
if (HT_ADC1 == adc_x)
{
/* Enable peripheral clock */
CKCUClock.Bit.AFIO = 1;
CKCUClock.Bit.ADC1 = 1;
CKCU_PeripClockConfig(CKCUClock, ENABLE);
/* Configure AFIO mode as ADC function */
switch(channel)
{
case 0:
AFIO_GPxConfig(HTCFG_ADC1CH0_GPIO_ID, HTCFG_ADC1CH0_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 1:
AFIO_GPxConfig(HTCFG_ADC1CH1_GPIO_ID, HTCFG_ADC1CH1_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 2:
AFIO_GPxConfig(HTCFG_ADC1CH2_GPIO_ID, HTCFG_ADC1CH2_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 3:
AFIO_GPxConfig(HTCFG_ADC1CH3_GPIO_ID, HTCFG_ADC1CH3_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 4:
AFIO_GPxConfig(HTCFG_ADC1CH4_GPIO_ID, HTCFG_ADC1CH4_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 5:
AFIO_GPxConfig(HTCFG_ADC1CH5_GPIO_ID, HTCFG_ADC1CH5_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 6:
AFIO_GPxConfig(HTCFG_ADC1CH6_GPIO_ID, HTCFG_ADC1CH6_AFIO_PIN, AFIO_FUN_ADC0);
break;
case 7:
AFIO_GPxConfig(HTCFG_ADC1CH7_GPIO_ID, HTCFG_ADC1CH7_AFIO_PIN, AFIO_FUN_ADC0);
break;
default:
break;
}
}
#endif
}
#endif

154
bsp/ht32/ht32f52352/project.uvoptx
View File

@ -170,7 +170,7 @@
<Group>
<GroupName>Applications</GroupName>
<tvExp>0</tvExp>
<tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
@ -449,6 +449,18 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\misc\adc.c</PathWithFileName>
<FilenameWithoutPath>adc.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>23</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\pin\pin.c</PathWithFileName>
<FilenameWithoutPath>pin.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
@ -456,7 +468,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>23</FileNumber>
<FileNumber>24</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -468,7 +480,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>24</FileNumber>
<FileNumber>25</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -480,7 +492,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>25</FileNumber>
<FileNumber>26</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -490,17 +502,29 @@
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>27</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\watchdog\watchdog.c</PathWithFileName>
<FilenameWithoutPath>watchdog.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>Drivers</GroupName>
<tvExp>0</tvExp>
<tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>26</FileNumber>
<FileNumber>28</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -512,7 +536,7 @@
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>27</FileNumber>
<FileNumber>29</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -524,7 +548,7 @@
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>28</FileNumber>
<FileNumber>30</FileNumber>
<FileType>2</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -536,7 +560,7 @@
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>29</FileNumber>
<FileNumber>31</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -548,7 +572,7 @@
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>30</FileNumber>
<FileNumber>32</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -560,7 +584,7 @@
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>31</FileNumber>
<FileNumber>33</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -580,7 +604,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>32</FileNumber>
<FileNumber>34</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -592,7 +616,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>33</FileNumber>
<FileNumber>35</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -604,7 +628,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>34</FileNumber>
<FileNumber>36</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -616,7 +640,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>35</FileNumber>
<FileNumber>37</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -636,7 +660,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>36</FileNumber>
<FileNumber>38</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -648,7 +672,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>37</FileNumber>
<FileNumber>39</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -660,19 +684,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>38</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\cpu_up.c</PathWithFileName>
<FilenameWithoutPath>cpu_up.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>39</FileNumber>
<FileNumber>40</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -684,7 +696,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>40</FileNumber>
<FileNumber>41</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -696,7 +708,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>41</FileNumber>
<FileNumber>42</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -708,7 +720,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>42</FileNumber>
<FileNumber>43</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -720,7 +732,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>43</FileNumber>
<FileNumber>44</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -732,7 +744,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>44</FileNumber>
<FileNumber>45</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -744,7 +756,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>45</FileNumber>
<FileNumber>46</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -756,7 +768,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>46</FileNumber>
<FileNumber>47</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -768,7 +780,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>47</FileNumber>
<FileNumber>48</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -780,7 +792,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>48</FileNumber>
<FileNumber>49</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -792,7 +804,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>49</FileNumber>
<FileNumber>50</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -804,7 +816,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>50</FileNumber>
<FileNumber>51</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -816,7 +828,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>51</FileNumber>
<FileNumber>52</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -828,7 +840,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>52</FileNumber>
<FileNumber>53</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -848,7 +860,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>53</FileNumber>
<FileNumber>54</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -860,7 +872,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>54</FileNumber>
<FileNumber>55</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -872,7 +884,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>55</FileNumber>
<FileNumber>56</FileNumber>
<FileType>2</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -884,7 +896,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>56</FileNumber>
<FileNumber>57</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -904,7 +916,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>57</FileNumber>
<FileNumber>58</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -916,7 +928,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>58</FileNumber>
<FileNumber>59</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -928,7 +940,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>59</FileNumber>
<FileNumber>60</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -940,7 +952,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>60</FileNumber>
<FileNumber>61</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -952,7 +964,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>61</FileNumber>
<FileNumber>62</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -964,7 +976,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>62</FileNumber>
<FileNumber>63</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -976,7 +988,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>63</FileNumber>
<FileNumber>64</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -988,7 +1000,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>64</FileNumber>
<FileNumber>65</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1000,7 +1012,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>65</FileNumber>
<FileNumber>66</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1012,7 +1024,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>66</FileNumber>
<FileNumber>67</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1024,7 +1036,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>67</FileNumber>
<FileNumber>68</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1036,7 +1048,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>68</FileNumber>
<FileNumber>69</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1048,7 +1060,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>69</FileNumber>
<FileNumber>70</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1060,7 +1072,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>70</FileNumber>
<FileNumber>71</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1072,7 +1084,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>71</FileNumber>
<FileNumber>72</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1084,7 +1096,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>72</FileNumber>
<FileNumber>73</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1096,7 +1108,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>73</FileNumber>
<FileNumber>74</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1108,7 +1120,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>74</FileNumber>
<FileNumber>75</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1120,7 +1132,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>75</FileNumber>
<FileNumber>76</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1132,7 +1144,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>76</FileNumber>
<FileNumber>77</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1144,7 +1156,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>77</FileNumber>
<FileNumber>78</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1156,7 +1168,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>78</FileNumber>
<FileNumber>79</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1168,7 +1180,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>79</FileNumber>
<FileNumber>80</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1180,7 +1192,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>80</FileNumber>
<FileNumber>81</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>

167
bsp/ht32/ht32f52352/project.uvprojx
View File

@ -335,7 +335,7 @@
<MiscControls></MiscControls>
<Define>__STDC_LIMIT_MACROS, RT_USING_ARMLIBC, RT_USING_LIBC, __CLK_TCK=RT_TICK_PER_SECOND, USE_HT32_DRIVER, __RTTHREAD__, USE_HT32F52352_SK, USE_HT32F52342_52, USE_MEM_HT32F52352</Define>
<Undefine></Undefine>
<IncludePath>..\..\..\include;..\..\..\components\drivers\include;.;..\..\..\components\drivers\include;..\libraries\HT32_STD_5xxxx_FWLib\library\HT32F5xxxx_Driver\inc;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\libraries\HT32_STD_5xxxx_FWLib\library\CMSIS\Include;..\..\..\components\drivers\spi;..\..\..\libcpu\arm\cortex-m0;..\..\..\components\drivers\include;..\..\..\components\libc\posix\io\eventfd;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\libc\compilers\common\extension;..\..\..\components\finsh;..\..\..\components\libc\posix\io\epoll;applications;..\..\..\components\libc\posix\ipc;..\..\..\components\drivers\include;..\libraries\HT32_STD_5xxxx_FWLib\library\Device\Holtek\HT32F5xxxx\Include;..\libraries\ht32_drivers;..\..\..\libcpu\arm\common;..\..\..\components\libc\posix\io\poll;board\inc;..\..\..\components\libc\compilers\common\include</IncludePath>
<IncludePath>..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\libc\compilers\common\extension;..\..\..\include;..\..\..\components\libc\posix\ipc;..\..\..\components\drivers\include;..\libraries\ht32_drivers;..\libraries\HT32_STD_5xxxx_FWLib\library\Device\Holtek\HT32F5xxxx\Include;..\libraries\HT32_STD_5xxxx_FWLib\library\HT32F5xxxx_Driver\inc;..\..\..\libcpu\arm\common;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\libraries\HT32_STD_5xxxx_FWLib\library\CMSIS\Include;..\..\..\components\libc\posix\io\epoll;..\..\..\components\drivers\include;..\..\..\components\libc\posix\io\eventfd;board\inc;..\..\..\components\drivers\include;..\..\..\components\drivers\include;.;..\..\..\components\libc\posix\io\poll;..\..\..\components\libc\compilers\common\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;applications;..\..\..\components\drivers\spi;..\..\..\libcpu\arm\cortex-m0</IncludePath>
</VariousControls>
</Cads>
<Aads>
@ -1094,6 +1094,61 @@
</FileArmAds>
</FileOption>
</File>
<File>
<FileName>adc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\misc\adc.c</FilePath>
<FileOption>
<CommonProperty>
<UseCPPCompiler>2</UseCPPCompiler>
<RVCTCodeConst>0</RVCTCodeConst>
<RVCTZI>0</RVCTZI>
<RVCTOtherData>0</RVCTOtherData>
<ModuleSelection>0</ModuleSelection>
<IncludeInBuild>1</IncludeInBuild>
<AlwaysBuild>0</AlwaysBuild>
<GenerateAssemblyFile>0</GenerateAssemblyFile>
<AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode>
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<ComprImg>1</ComprImg>
</CommonProperty>
<FileArmAds>
<Cads>
<interw>2</interw>
<Optim>0</Optim>
<oTime>2</oTime>
<SplitLS>2</SplitLS>
<OneElfS>2</OneElfS>
<Strict>2</Strict>
<EnumInt>2</EnumInt>
<PlainCh>2</PlainCh>
<Ropi>2</Ropi>
<Rwpi>2</Rwpi>
<wLevel>0</wLevel>
<uThumb>2</uThumb>
<uSurpInc>2</uSurpInc>
<uC99>2</uC99>
<useXO>2</useXO>
<v6Lang>0</v6Lang>
<v6LangP>0</v6LangP>
<vShortEn>2</vShortEn>
<vShortWch>2</vShortWch>
<v6Lto>2</v6Lto>
<v6WtE>2</v6WtE>
<v6Rtti>2</v6Rtti>
<VariousControls>
<MiscControls> </MiscControls>
<Define>__RT_IPC_SOURCE__</Define>
<Undefine> </Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Cads>
</FileArmAds>
</FileOption>
</File>
<File>
<FileName>pin.c</FileName>
<FileType>1</FileType>
@ -1314,6 +1369,61 @@
</FileArmAds>
</FileOption>
</File>
<File>
<FileName>watchdog.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\watchdog\watchdog.c</FilePath>
<FileOption>
<CommonProperty>
<UseCPPCompiler>2</UseCPPCompiler>
<RVCTCodeConst>0</RVCTCodeConst>
<RVCTZI>0</RVCTZI>
<RVCTOtherData>0</RVCTOtherData>
<ModuleSelection>0</ModuleSelection>
<IncludeInBuild>1</IncludeInBuild>
<AlwaysBuild>0</AlwaysBuild>
<GenerateAssemblyFile>0</GenerateAssemblyFile>
<AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode>
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<ComprImg>1</ComprImg>
</CommonProperty>
<FileArmAds>
<Cads>
<interw>2</interw>
<Optim>0</Optim>
<oTime>2</oTime>
<SplitLS>2</SplitLS>
<OneElfS>2</OneElfS>
<Strict>2</Strict>
<EnumInt>2</EnumInt>
<PlainCh>2</PlainCh>
<Ropi>2</Ropi>
<Rwpi>2</Rwpi>
<wLevel>0</wLevel>
<uThumb>2</uThumb>
<uSurpInc>2</uSurpInc>
<uC99>2</uC99>
<useXO>2</useXO>
<v6Lang>0</v6Lang>
<v6LangP>0</v6LangP>
<vShortEn>2</vShortEn>
<vShortWch>2</vShortWch>
<v6Lto>2</v6Lto>
<v6WtE>2</v6WtE>
<v6Rtti>2</v6Rtti>
<VariousControls>
<MiscControls> </MiscControls>
<Define>__RT_IPC_SOURCE__</Define>
<Undefine> </Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Cads>
</FileArmAds>
</FileOption>
</File>
</Files>
</Group>
<Group>
@ -1489,61 +1599,6 @@
</FileArmAds>
</FileOption>
</File>
<File>
<FileName>cpu_up.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\cpu_up.c</FilePath>
<FileOption>
<CommonProperty>
<UseCPPCompiler>2</UseCPPCompiler>
<RVCTCodeConst>0</RVCTCodeConst>
<RVCTZI>0</RVCTZI>
<RVCTOtherData>0</RVCTOtherData>
<ModuleSelection>0</ModuleSelection>
<IncludeInBuild>1</IncludeInBuild>
<AlwaysBuild>0</AlwaysBuild>
<GenerateAssemblyFile>0</GenerateAssemblyFile>
<AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode>
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<ComprImg>1</ComprImg>
</CommonProperty>
<FileArmAds>
<Cads>
<interw>2</interw>
<Optim>0</Optim>
<oTime>2</oTime>
<SplitLS>2</SplitLS>
<OneElfS>2</OneElfS>
<Strict>2</Strict>
<EnumInt>2</EnumInt>
<PlainCh>2</PlainCh>
<Ropi>2</Ropi>
<Rwpi>2</Rwpi>
<wLevel>0</wLevel>
<uThumb>2</uThumb>
<uSurpInc>2</uSurpInc>
<uC99>2</uC99>
<useXO>2</useXO>
<v6Lang>0</v6Lang>
<v6LangP>0</v6LangP>
<vShortEn>2</vShortEn>
<vShortWch>2</vShortWch>
<v6Lto>2</v6Lto>
<v6WtE>2</v6WtE>
<v6Rtti>2</v6Rtti>
<VariousControls>
<MiscControls> </MiscControls>
<Define>__RT_KERNEL_SOURCE__</Define>
<Undefine> </Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Cads>
</FileArmAds>
</FileOption>
</File>
<File>
<FileName>idle.c</FileName>
<FileType>1</FileType>

21
bsp/ht32/ht32f52352/rtconfig.h
View File

@ -21,9 +21,6 @@
/* kservice optimization */
#define RT_USING_DEBUG
#define RT_DEBUGING_COLOR
#define RT_DEBUGING_CONTEXT
/* Inter-Thread communication */
@ -45,7 +42,7 @@
#define RT_USING_CONSOLE
#define RT_CONSOLEBUF_SIZE 128
#define RT_CONSOLE_DEVICE_NAME "usart1"
#define RT_VER_NUM 0x50100
#define RT_VER_NUM 0x50200
#define RT_BACKTRACE_LEVEL_MAX_NR 32
#define ARCH_ARM
#define ARCH_ARM_CORTEX_M
@ -62,11 +59,11 @@
#define FINSH_USING_MSH
#define FINSH_THREAD_NAME "tshell"
#define FINSH_THREAD_PRIORITY 20
#define FINSH_THREAD_STACK_SIZE 4096
#define FINSH_THREAD_STACK_SIZE 1024
#define FINSH_USING_HISTORY
#define FINSH_HISTORY_LINES 5
#define FINSH_USING_SYMTAB
#define FINSH_CMD_SIZE 80
#define FINSH_CMD_SIZE 32
#define MSH_USING_BUILT_IN_COMMANDS
#define FINSH_USING_DESCRIPTION
#define FINSH_ARG_MAX 10
@ -81,11 +78,12 @@
#define RT_UNAMED_PIPE_NUMBER 64
#define RT_USING_SERIAL
#define RT_USING_SERIAL_V1
#define RT_SERIAL_USING_DMA
#define RT_SERIAL_RB_BUFSZ 64
#define RT_USING_I2C
#define RT_USING_I2C_BITOPS
#define RT_USING_ADC
#define RT_USING_SPI
#define RT_USING_WDT
#define RT_USING_PIN
/* Using USB */
@ -191,6 +189,9 @@
/* STM32 HAL & SDK Drivers */
/* Infineon HAL Packages */
/* Kendryte SDK */
@ -255,15 +256,21 @@
/* Hardware Drivers Config */
/* Chip Configuration */
#define SOC_KERNEL
#define CORTEX_M0
#define SOC_HT32F52352
/* Onboard Peripheral Drivers */
/* On-chip Peripheral Drivers */
#define BSP_USING_GPIO
#define BSP_USING_UART
#define BSP_USING_USART1
#define BSP_USING_USART1_NAME "usart1"
/* Board extended module Drivers */

11
bsp/ht32/libraries/ht32_drivers/SConscript
View File

@ -23,8 +23,17 @@ if GetDepend(['BSP_USING_UART']):
if GetDepend(['BSP_USING_SPI']):
src += ['drv_spi.c']
if GetDepend(['BSP_USING_I2C']):
if GetDepend(['BSP_USING_I2C_HW']):
src += ['drv_i2c.c']
if GetDepend(['BSP_USING_I2C_SW']):
src += ['drv_soft_i2c.c']
if GetDepend(['BSP_USING_ADC']):
src += ['drv_adc.c']
if GetDepend(['BSP_USING_WDT']):
src += ['drv_wdt.c']
#创建一个列表，用于保存需要包含的H文件路径
path = [cwd]

174
bsp/ht32/libraries/ht32_drivers/drv_adc.c Normal file
View File

@ -0,0 +1,174 @@
/*
* Copyright (c) 2006-2024, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2024-05-17 QT-one first version
*/
#include <rtdbg.h>
#include "drv_adc.h"
#ifdef RT_USING_ADC
#if !defined(BSP_USING_ADC0) && !defined(BSP_USING_ADC1)
#error "Please define at least one BSP_USING_ADCx"
/* this driver can be disabled at menuconfig RT-Thread Components Device Drivers */
#endif
struct ht32_adc
{
struct rt_adc_device ht32_adc_device;
HT_ADC_TypeDef *adc_x;
char *name;
};
/* ADC Peripheral List */
static struct ht32_adc ht32_adc_obj[] =
{
#ifdef BSP_USING_ADC0
{
.adc_x = HT_ADC0,
.name = BSP_USING_ADC0_NAME,
},
#endif
#ifdef BSP_USING_ADC1
{
.adc_x = HT_ADC1,
.name = BSP_USING_ADC1_NAME,
},
#endif
};
static rt_err_t ht32_adc_enabled(struct rt_adc_device *device, rt_int8_t channel, rt_bool_t enabled)
{
HT_ADC_TypeDef *adc_x;
RT_ASSERT(device != RT_NULL);
adc_x = (HT_ADC_TypeDef*)device->parent.user_data;
if(enabled)
{
ht32_adc_gpio_init(adc_x,channel);
/* Configure the CK_ADCn prescaler */
#ifdef BSP_USING_ADC0
if(HT_ADC0 == adc_x)
{
CKCU_SetADCnPrescaler(CKCU_ADCPRE_ADC0,CKCU_ADCPRE_DIV64);
}
#endif
#ifdef BSP_USING_ADC1
if(HT_ADC1 == adc_x)
{
CKCU_SetADCnPrescaler(CKCU_ADCPRE_ADC1,CKCU_ADCPRE_DIV64);
}
#endif
/* Configure conversion mode and sequence length (number of conversion channels) */
ADC_RegularGroupConfig(adc_x,ONE_SHOT_MODE,1,0);
#ifdef SOC_SERIES_HT32F5
/* Configuring the Sampling Time */
ADC_SamplingTimeConfig(adc_x,0);
/* Configuring Channel Priority */
ADC_RegularChannelConfig(adc_x,channel,0);
#endif
#ifdef SOC_SERIES_HT32F1
/* Configuring Channel Priority */
ADC_RegularChannelConfig(adc_x,channel,0,0);
#endif
/* Configuring the Trigger Source */
ADC_RegularTrigConfig(adc_x,ADC_TRIG_SOFTWARE);
/* Enable ADC */
ADC_Cmd(adc_x,ENABLE);
}
else
{
/* Disable ADC */
ADC_Cmd(adc_x,DISABLE);
}
return RT_EOK;
}
static rt_err_t ht32_adc_convert(struct rt_adc_device *device, rt_int8_t channel, rt_uint32_t *value)
{
HT_ADC_TypeDef *adc_x;
rt_uint32_t timeout = 0;
FlagStatus adc_writ_flag = RESET;
RT_ASSERT(device != RT_NULL);
adc_x = (HT_ADC_TypeDef*)device->parent.user_data;
/* Toggle the acquisition channel */
#ifdef SOC_SERIES_HT32F5
ADC_RegularChannelConfig(adc_x,channel,0);
#endif
#ifdef SOC_SERIES_HT32F1
ADC_RegularChannelConfig(adc_x,channel,0,0);
#endif
/* enable Software triggered */
ADC_SoftwareStartConvCmd(adc_x,ENABLE);
while((!adc_writ_flag) && (timeout < 0xFFFF))
{
/* Wait for the conversion to complete */
adc_writ_flag = ADC_GetFlagStatus(adc_x,ADC_FLAG_SINGLE_EOC);
timeout++;
}
if(timeout >= 0xFFFF)
{
LOG_D("channel%d converts timeout, please confirm adc_x enabled or not", channel);
/* disable Software triggered */
ADC_SoftwareStartConvCmd(adc_x,DISABLE);
return -RT_ERROR;
}
/* clear ADC_FLAG_SINGLE_EOC flag */
ADC_ClearIntPendingBit(adc_x,ADC_FLAG_SINGLE_EOC);
/* get adc value */
*value = ADC_GetConversionData(adc_x,ADC_REGULAR_DATA0);
/* disable Software triggered */
ADC_SoftwareStartConvCmd(adc_x,DISABLE);
return RT_EOK;
}
static rt_uint8_t ht32_adc_get_resolution(struct rt_adc_device *device)
{
return 0;
}
static rt_int16_t ht32_adc_get_vref(struct rt_adc_device *device)
{
return 0;
}
/* ADC Device Operation Function Interface */
static const struct rt_adc_ops ht32_adc_ops =
{
.enabled = ht32_adc_enabled,
.convert = ht32_adc_convert,
.get_resolution = ht32_adc_get_resolution,
.get_vref = ht32_adc_get_vref,
};
static int rt_hw_adc_init(void)
{
int result = RT_EOK;
int i = 0;
for (i = 0; i < sizeof(ht32_adc_obj) / sizeof(ht32_adc_obj[0]); i++)
{
/* register ADC device */
if (rt_hw_adc_register(&ht32_adc_obj[i].ht32_adc_device, ht32_adc_obj[i].name, &ht32_adc_ops, ht32_adc_obj[i].adc_x) == RT_EOK)
{
LOG_D("%s register success", ht32_adc_obj[i].name);
}
else
{
LOG_E("%s register failed", ht32_adc_obj[i].name);
result = -RT_ERROR;
}
}
return result;
}
INIT_BOARD_EXPORT(rt_hw_adc_init);
#endif /* RT_USING_ADC */

30
bsp/ht32/libraries/ht32_drivers/drv_adc.h Normal file
View File

@ -0,0 +1,30 @@
/*
* Copyright (c) 2006-2024, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2024-05-17 QT-one first version
*/
#ifndef __DRV_ADC_H__
#define __DRV_ADC_H__
#include <rtthread.h>
#include <rthw.h>
#ifdef RT_USING_DEVICE
#include <rtdevice.h>
#endif
#include "drv_common.h"
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __DRV_ADC_H__ */

40
bsp/ht32/libraries/ht32_drivers/drv_i2c.c
View File

@ -11,8 +11,8 @@
#include "drv_i2c.h"
#ifdef RT_USING_I2C
#if !defined(BSP_USING_I2C0) && !defined(BSP_USING_I2C1)
#error "Please define at least one BSP_USING_I2Cx"
#if !defined(BSP_USING_I2C0_HW) && !defined(BSP_USING_I2C1_HW)
#error "Please define at least one BSP_USING_I2Cx_HW"
/* this driver can be disabled at menuconfig RT-Thread Components Device Drivers */
#endif
@ -31,21 +31,29 @@ struct ht32_i2c
enum
{
#ifdef BSP_USING_I2C0
#ifdef BSP_USING_I2C0_HW
I2C0_INDEX,
#endif
#ifdef BSP_USING_I2C1
#ifdef BSP_USING_I2C1_HW
I2C1_INDEX,
#endif
};
static struct ht32_i2c_config i2c_config[] =
{
#ifdef BSP_USING_I2C0
{HT_I2C0, "i2c0", I2C0_IRQn},
#ifdef BSP_USING_I2C0_HW
{
.i2c_x = HT_I2C0,
.i2c_name = BSP_USING_I2C0_HW_NAME,
.irq = I2C0_IRQn
},
#endif
#ifdef BSP_USING_I2C1
{HT_I2C1, "i2c1", I2C1_IRQn},
#ifdef BSP_USING_I2C1_HW
{
.i2c_x = HT_I2C1,
.i2c_name = BSP_USING_I2C1_HW_NAME,
.irq = I2C1_IRQn
},
#endif
};
@ -56,13 +64,13 @@ static rt_size_t ht32_i2c_init(struct ht32_i2c *i2c_drv)
struct ht32_i2c_config *i2c_config = i2c_drv->config;
CKCU_PeripClockConfig_TypeDef CKCUClock = {{0}};
#ifdef BSP_USING_I2C0
#ifdef BSP_USING_I2C0_HW
if (HT_I2C0 == i2c_config->i2c_x)
{
CKCUClock.Bit.I2C0 = 1;
}
#endif
#ifdef BSP_USING_I2C1
#ifdef BSP_USING_I2C1_HW
if (HT_I2C1 == i2c_config->i2c_x)
{
CKCUClock.Bit.I2C1 = 1;
@ -71,7 +79,7 @@ static rt_size_t ht32_i2c_init(struct ht32_i2c *i2c_drv)
CKCUClock.Bit.AFIO = 1;
CKCU_PeripClockConfig(CKCUClock, ENABLE);
ht32_i2c_gpio_init(i2c_config->i2c_x);
ht32_hardware_i2c_gpio_init(i2c_config->i2c_x);
I2C_InitTypeDef I2C_InitStructure;
I2C_InitStructure.I2C_GeneralCall = DISABLE;
@ -95,7 +103,11 @@ static int ht32_i2c_read(struct ht32_i2c_config *hi2c,
uint16_t date_num = 0;
uint8_t data = 0xFF;
/* Determine if the bus is idle */
while (I2C_GetFlagStatus(hi2c->i2c_x, I2C_FLAG_BUSBUSY));
/* Send start bit, slave address and read/write bit */
I2C_TargetAddressConfig(hi2c->i2c_x, slave_address, I2C_MASTER_READ);
while (!I2C_CheckStatus(hi2c->i2c_x, I2C_MASTER_SEND_START));
while (!I2C_CheckStatus(hi2c->i2c_x, I2C_MASTER_RECEIVER_MODE));
I2C_AckCmd(hi2c->i2c_x, ENABLE);
@ -128,6 +140,9 @@ static int ht32_i2c_write(struct ht32_i2c_config *hi2c,
{
uint16_t date_num = data_byte;
/* Determine if the bus is idle */
while (I2C_GetFlagStatus(hi2c->i2c_x, I2C_FLAG_BUSBUSY));
/* Send start bit, slave address and read/write bit */
I2C_TargetAddressConfig(hi2c->i2c_x, slave_address, I2C_MASTER_WRITE);
while (!I2C_CheckStatus(hi2c->i2c_x, I2C_MASTER_SEND_START));
@ -136,7 +151,8 @@ static int ht32_i2c_write(struct ht32_i2c_config *hi2c,
while (date_num--)
{
while (!I2C_CheckStatus(hi2c->i2c_x, I2C_MASTER_TX_EMPTY));
I2C_SendData(hi2c->i2c_x, *p_buffer++);
I2C_SendData(hi2c->i2c_x, *p_buffer);
p_buffer++;
}
while (!I2C_CheckStatus(hi2c->i2c_x, I2C_MASTER_TX_EMPTY));

228
bsp/ht32/libraries/ht32_drivers/drv_soft_i2c.c Normal file
View File

@ -0,0 +1,228 @@
/*
* Copyright (c) 2006-2024, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2024-05-29 QT-one first version
*/
#include <rtdbg.h>
#include "drv_soft_i2c.h"
#ifdef RT_USING_I2C
#if !defined(BSP_USING_I2C0_SW) && !defined(BSP_USING_I2C1_SW) && !defined(BSP_USING_I2C2_SW)
#error "Please define at least one BSP_USING_I2Cx_SW"
/* this driver can be disabled at menuconfig RT-Thread Components Device Drivers */
#endif
/* ht32 software i2c config class */
struct ht32_soft_i2c_config
{
rt_uint8_t scl;
rt_uint8_t sda;
const char *bus_name;
};
/* ht32 software i2c dirver class */
struct ht32_soft_i2c
{
struct rt_i2c_bit_ops ops;
struct rt_i2c_bus_device i2c_bus;
};
static rt_uint8_t scl_rw_flag = 0;
static rt_uint8_t sda_rw_flag = 0;
static const struct ht32_soft_i2c_config soft_i2c_config[] =
{
#ifdef BSP_USING_I2C0_SW
{
.scl = BSP_I2C0_SLC_PIN,
.sda = BSP_I2C0_SDA_PIN,
.bus_name = BSP_USING_I2C0_SW_NAME,
},
#endif
#ifdef BSP_USING_I2C1_SW
{
.scl = BSP_I2C1_SLC_PIN,
.sda = BSP_I2C1_SDA_PIN,
.bus_name = BSP_USING_I2C1_SW_NAME,
},
#endif
#ifdef BSP_USING_I2C2_SW
{
.scl = BSP_I2C2_SLC_PIN,
.sda = BSP_I2C2_SDA_PIN,
.bus_name = BSP_USING_I2C2_SW_NAME,
},
#endif
};
static struct ht32_soft_i2c i2c_obj[sizeof(soft_i2c_config) / sizeof(soft_i2c_config[0])];
/* this function initializes the software i2c pin */
static void ht32_soft_i2c_gpio_init(struct ht32_soft_i2c *i2c)
{
struct ht32_soft_i2c_config* cfg = (struct ht32_soft_i2c_config*)i2c->ops.data;
rt_pin_mode(cfg->scl, PIN_MODE_OUTPUT_OD);
rt_pin_mode(cfg->sda, PIN_MODE_OUTPUT_OD);
rt_pin_write(cfg->scl, PIN_HIGH);
rt_pin_write(cfg->sda, PIN_HIGH);
}
/* this function sets the sda pin */
void ht32_set_sda(void *data, rt_int32_t state)
{
struct ht32_soft_i2c_config* cfg = (struct ht32_soft_i2c_config*)data;
if(sda_rw_flag != 0)
{
sda_rw_flag = 0;
rt_pin_mode(cfg->sda, PIN_MODE_OUTPUT_OD);
}
if (state)
{
rt_pin_write(cfg->sda, PIN_HIGH);
}
else
{
rt_pin_write(cfg->sda, PIN_LOW);
}
}
/* this function sets the scl pin */
void ht32_set_scl(void *data, rt_int32_t state)
{
struct ht32_soft_i2c_config* cfg = (struct ht32_soft_i2c_config*)data;
if(scl_rw_flag != 0)
{
scl_rw_flag = 0;
rt_pin_mode(cfg->scl, PIN_MODE_OUTPUT_OD);
}
if (state)
{
rt_pin_write(cfg->scl, PIN_HIGH);
}
else
{
rt_pin_write(cfg->scl, PIN_LOW);
}
}
/* this function gets the sda pin state */
rt_int32_t ht32_get_sda(void *data)
{
struct ht32_soft_i2c_config* cfg = (struct ht32_soft_i2c_config*)data;
if(sda_rw_flag == 0)
{
sda_rw_flag = 1;
rt_pin_mode(cfg->sda, PIN_MODE_INPUT);
}
return rt_pin_read(cfg->sda);
}
/* this function gets the scl pin state */
rt_int32_t ht32_get_scl(void *data)
{
struct ht32_soft_i2c_config* cfg = (struct ht32_soft_i2c_config*)data;
if(scl_rw_flag == 0)
{
scl_rw_flag = 1;
rt_pin_mode(cfg->scl, PIN_MODE_INPUT);
}
return rt_pin_read(cfg->scl);
}
void ht32_udelay(rt_uint32_t us)
{
rt_uint32_t ticks;
rt_uint32_t told, tnow, tcnt = 0;
rt_uint32_t reload = SysTick->LOAD;
ticks = us * reload / (1000000 / RT_TICK_PER_SECOND);
told = SysTick->VAL;
while (1)
{
tnow = SysTick->VAL;
if (tnow != told)
{
if (tnow < told)
{
tcnt += told - tnow;
}
else
{
tcnt += reload - tnow + told;
}
told = tnow;
if (tcnt >= ticks)
{
break;
}
}
}
}
static const struct rt_i2c_bit_ops ht32_bit_ops_default =
{
.data = RT_NULL,
.set_sda = ht32_set_sda,
.set_scl = ht32_set_scl,
.get_sda = ht32_get_sda,
.get_scl = ht32_get_scl,
.udelay = ht32_udelay,
.delay_us = 1,
.timeout = 100
};
/* if i2c is locked, this function will unlock it */
static rt_err_t ht32_soft_i2c_bus_unlock(const struct ht32_soft_i2c_config *cfg)
{
rt_int32_t i = 0;
rt_pin_mode(cfg->sda, PIN_MODE_INPUT_PULLUP);
if (PIN_LOW == rt_pin_read(cfg->sda))
{
while (i++ < 9)
{
rt_pin_write(cfg->scl, PIN_HIGH);
ht32_udelay(100);
rt_pin_write(cfg->scl, PIN_LOW);
ht32_udelay(100);
}
}
if (PIN_LOW == rt_pin_read(cfg->sda))
{
return -RT_ERROR;
}
rt_pin_mode(cfg->sda, PIN_MODE_OUTPUT_OD);
return RT_EOK;
}
/* i2c initialization function */
int rt_sw_i2c_init(void)
{
rt_size_t obj_num = sizeof(i2c_obj) / sizeof(struct ht32_soft_i2c);
rt_err_t result;
for (int i = 0; i < obj_num; i++)
{
i2c_obj[i].ops = ht32_bit_ops_default;
i2c_obj[i].ops.data = (void*)&soft_i2c_config[i];
i2c_obj[i].i2c_bus.priv = &i2c_obj[i].ops;
ht32_soft_i2c_gpio_init(&i2c_obj[i]);
result = rt_i2c_bit_add_bus(&i2c_obj[i].i2c_bus, soft_i2c_config[i].bus_name);
RT_ASSERT(result == RT_EOK);
ht32_soft_i2c_bus_unlock(&soft_i2c_config[i]);
LOG_D("software simulation %s init done, pin scl: %d, pin sda %d",
soft_i2c_config[i].bus_name,
soft_i2c_config[i].scl,
soft_i2c_config[i].sda);
}
return result;
}
INIT_BOARD_EXPORT(rt_sw_i2c_init);
#endif /* RT_USING_I2C */

30
bsp/ht32/libraries/ht32_drivers/drv_soft_i2c.h Normal file
View File

@ -0,0 +1,30 @@
/*
* Copyright (c) 2006-2024, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2024-05-29 QT-one first version
*/
#ifndef __DRV_I2C_H__
#define __DRV_I2C_H__
#include <rtthread.h>
#include <rthw.h>
#ifdef RT_USING_DEVICE
#include <rtdevice.h>
#endif
#include "drv_common.h"
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __DRV_I2C_H__ */

16
bsp/ht32/libraries/ht32_drivers/drv_spi.c
View File

@ -48,10 +48,18 @@ enum
static struct ht32_spi_config spi_config[] =
{
#ifdef BSP_USING_SPI0
{HT_SPI0, "spi0", SPI0_IRQn},
{
.spi_x = HT_SPI0,
.spi_name = BSP_USING_SPI0_NAME,
.irq = SPI0_IRQn
},
#endif
#ifdef BSP_USING_SPI1
{HT_SPI1, "spi1", SPI1_IRQn},
{
.spi_x = HT_SPI1,
.spi_name = BSP_USING_SPI1_NAME,
.irq = SPI1_IRQn
},
#endif
};
@ -176,7 +184,7 @@ static rt_err_t ht32_configure(struct rt_spi_device *device, struct rt_spi_confi
}
else
{
return RT_ERROR;
return -RT_ERROR;
}
/* Set the polarity and phase of the SPI */
@ -219,7 +227,7 @@ static rt_err_t ht32_configure(struct rt_spi_device *device, struct rt_spi_confi
}
else
{
return RT_ERROR;
return -RT_ERROR;
}
SPI_InitStructure.SPI_FIFO = SPI_FIFO_DISABLE;

50
bsp/ht32/libraries/ht32_drivers/drv_usart.c
View File

@ -52,50 +52,50 @@ static struct ht32_usart usart_config[] =
{
#ifdef BSP_USING_USART0
{
"usart0",
HT_USART0,
USART0_IRQn,
RT_NULL
.name = BSP_USING_USART0_NAME,
.usart_x = HT_USART0,
.irq = USART0_IRQn,
.serial = RT_NULL
},
#endif
#ifdef BSP_USING_USART1
{
"usart1",
HT_USART1,
USART1_IRQn,
RT_NULL
.name = BSP_USING_USART1_NAME,
.usart_x = HT_USART1,
.irq = USART1_IRQn,
.serial = RT_NULL
},
#endif
#ifdef BSP_USING_UART0
{
"uart0",
HT_UART0,
UART0_IRQn,
RT_NULL
.name = BSP_USING_UART0_NAME,
.usart_x = HT_UART0,
.irq = UART0_IRQn,
.serial = RT_NULL
},
#endif
#ifdef BSP_USING_UART1
{
"uart1",
HT_UART1,
UART1_IRQn,
RT_NULL
.name = BSP_USING_UART1_NAME,
.usart_x = HT_UART1,
.irq = UART1_IRQn,
.serial = RT_NULL
},
#endif
#ifdef BSP_USING_UART2
{
"uart2",
HT_UART2,
UART0_UART2_IRQn,
RT_NULL
.name = BSP_USING_UART2_NAME,
.usart_x = HT_UART2,
.irq = UART0_UART2_IRQn,
.serial = RT_NULL
},
#endif
#ifdef BSP_USING_UART3
{
"uart3",
HT_UART3,
UART1_UART3_IRQn,
RT_NULL
.name = BSP_USING_UART3_NAME,
.usart_x = HT_UART3,
.irq = UART1_UART3_IRQn,
.serial = RT_NULL
},
#endif
};
@ -256,7 +256,7 @@ static int ht32_getc(struct rt_serial_device *serial)
static rt_ssize_t ht32_dma_transmit(struct rt_serial_device *serial, rt_uint8_t *buf, rt_size_t size, int direction)
{
return RT_ERROR;
return -RT_ERROR;
}
static const struct rt_uart_ops ht32_usart_ops =

149
bsp/ht32/libraries/ht32_drivers/drv_wdt.c Normal file
View File

@ -0,0 +1,149 @@
/*
* Copyright (c) 2006-2024, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2024-05-24 QT-one first version
*/
#include <rtdbg.h>
#include "drv_wdt.h"
#ifdef BSP_USING_WDT
struct ht32_wdt
{
struct rt_watchdog_device ht32_wdt_device;
rt_uint8_t ht32_wdt_start_flag;
};
static struct ht32_wdt ht32_wdt_obj;
/* Initialization functions for wdt */
static rt_err_t ht32_wdt_init(rt_watchdog_t *wdt)
{
return -RT_ERROR;
}
/* Control function for wdt */
static rt_err_t ht32_wdt_control(rt_watchdog_t *wdt, int cmd, void *arg)
{
rt_uint16_t wdt_time_val = (*((rt_uint16_t*)arg));
switch(cmd)
{
/* get timeout(in seconds) */
case RT_DEVICE_CTRL_WDT_GET_TIMEOUT:
(*((rt_uint16_t*)arg)) = (WDT_GetReloadValue())/250;
break;
/* set timeout(in seconds) */
case RT_DEVICE_CTRL_WDT_SET_TIMEOUT:
if(ht32_wdt_obj.ht32_wdt_start_flag)
{
LOG_W("Please stop the WDT device first.");
}
else
{
if(wdt_time_val > 16)
{
LOG_W("Parameter out of settable range.");
}
else
{
/* Disable WDT Protection */
WDT_ProtectCmd(DISABLE);
/* Reset WDT */
WDT_DeInit();
/* Set Prescaler Value, 32K/128 = 250Hz 4ms */
WDT_SetPrescaler(WDT_PRESCALER_128);
/* Set Prescaler Value, 250Hz*wdt_time_val*250 = nms */
WDT_SetReloadValue((wdt_time_val*250));
/* Set Delta Value, 250Hz*wdt_time_val*250 = nms */
WDT_SetDeltaValue((wdt_time_val*250));
/* Enable the WDT Reset when WDT meets underflow or error */
WDT_ResetCmd(ENABLE);
/* Reload Counter as WDTV Value */
WDT_Restart();
}
}
break;
/* get the left time before reboot(in seconds) */
case RT_DEVICE_CTRL_WDT_GET_TIMELEFT:
return -RT_ERROR;
/* refresh watchdog */
case RT_DEVICE_CTRL_WDT_KEEPALIVE:
if(ht32_wdt_obj.ht32_wdt_start_flag)
{
/* Enable WDT Restart (Reload WDT Counter) */
WDT_Restart();
}
else
{
LOG_W("WDT device not activated.");
}
break;
/* start watchdog */
case RT_DEVICE_CTRL_WDT_START:
if(ht32_wdt_obj.ht32_wdt_start_flag)
{
LOG_W("The WDT device has been activated.");
}
else
{
/* Enable WDT */
WDT_Cmd(ENABLE);
/* Enable WDT Protection */
WDT_ProtectCmd(ENABLE);
ht32_wdt_obj.ht32_wdt_start_flag = 1;
}
break;
/* stop watchdog */
case RT_DEVICE_CTRL_WDT_STOP:
if(ht32_wdt_obj.ht32_wdt_start_flag)
{
/* Disable WDT Protection */
WDT_ProtectCmd(DISABLE);
/* Disable WDT */
WDT_Cmd(DISABLE);
ht32_wdt_obj.ht32_wdt_start_flag = 0;
}
else
{
LOG_W("WDT is not activated and does not need to be shut down.");
}
break;
default:
LOG_W("This command is not supported.");
return -RT_ERROR;
}
return RT_EOK;
}
static struct rt_watchdog_ops ht32_wdt_ops =
{
.init = ht32_wdt_init,
.control = ht32_wdt_control,
};
static int rt_hw_wdt_init(void)
{
CKCU_PeripClockConfig_TypeDef CKCUClock = {{0}};
CKCUClock.Bit.WDT = 1;
CKCU_PeripClockConfig(CKCUClock, ENABLE);
/* wdt operator function */
ht32_wdt_obj.ht32_wdt_device.ops = &ht32_wdt_ops;
/* wdt activation flag bit */
ht32_wdt_obj.ht32_wdt_start_flag = 0;
/* register watchdog device */
if (rt_hw_watchdog_register(&ht32_wdt_obj.ht32_wdt_device, BSP_USING_WDT_NAME, RT_DEVICE_FLAG_DEACTIVATE, &ht32_wdt_obj) != RT_EOK)
{
LOG_E("wdt device register failed.");
return -RT_ERROR;
}
LOG_D("wdt device register success.");
return RT_EOK;
}
INIT_BOARD_EXPORT(rt_hw_wdt_init);
#endif

29
bsp/ht32/libraries/ht32_drivers/drv_wdt.h Normal file
View File

@ -0,0 +1,29 @@
/*
* Copyright (c) 2006-2024, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2024-05-24 QT-one first version
*/
#ifndef __DRV_WDT_H__
#define __DRV_WDT_H__
#include <rtthread.h>
#include <rthw.h>
#ifdef RT_USING_DEVICE
#include <rtdevice.h>
#endif
#include "drv_common.h"
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __DRV_WDT_H__ */