Add the driver of UART1
This commit is contained in:
parent
187a860e17
commit
67ffb94360
|
@ -54,7 +54,7 @@ msh />
|
|||
| 驱动 | 支持情况 | 备注 |
|
||||
| ------ | ---- | :------ |
|
||||
| UART | 支持 | UART0, RX(PTC7), TX(PTC8) |
|
||||
| | 未支持 | UART1, RX(PTA25), TX(PTA26) |
|
||||
| | 支持 | UART1, RX(PTA25), TX(PTA26) |
|
||||
| clock | 支持 | |
|
||||
| GPIO | 支持(列表可能不完善,同时也需要按照使用到的IO调整pinmux、clock) | |
|
||||
| MMC/SD | 支持 | |
|
||||
|
@ -67,6 +67,8 @@ msh />
|
|||
| PTA23 | LED_GREEN |
|
||||
| PTA24 | LED_RED |
|
||||
| PTA24 | LED_STS |
|
||||
| PTA25 | UART1_RX |
|
||||
| PTA26 | UART1_TX |
|
||||
| PTE8 | BTN_SW3 |
|
||||
| PTE9 | BTN_SW4 |
|
||||
| PTE12 | BTN_SW5 |
|
||||
|
|
|
@ -39,6 +39,8 @@ void BOARD_InitBootPins(void) {
|
|||
#define PIN22_IDX 22u /*!< Pin number for pin 22 in a port */
|
||||
#define PIN23_IDX 23u /*!< Pin number for pin 23 in a port */
|
||||
#define PIN24_IDX 24u /*!< Pin number for pin 24 in a port */
|
||||
#define PIN25_IDX 25u /*!< Pin number for pin 25 in a port */
|
||||
#define PIN26_IDX 26u /*!< Pin number for pin 26 in a port */
|
||||
#define PIN27_IDX 27u /*!< Pin number for pin 27 in a port */
|
||||
|
||||
/*
|
||||
|
@ -48,6 +50,8 @@ BOARD_InitPins:
|
|||
- pin_list:
|
||||
- {pin_num: N2, peripheral: LPUART0, signal: RX, pin_signal: LPCMP0_IN0/PTC7/LLWU_P15/LPSPI0_PCS3/LPUART0_RX/LPI2C1_HREQ/TPM0_CH0/LPTMR1_ALT1}
|
||||
- {pin_num: P3, peripheral: LPUART0, signal: TX, pin_signal: LPCMP0_IN1/PTC8/LPSPI0_SCK/LPUART0_TX/LPI2C0_HREQ/TPM0_CH1}
|
||||
- {pin_num: B5, peripheral: LPUART1, signal: RX, pin_signal: PTA25/LPUART1_RX/LPSPI3_SOUT/LPI2C2_SDAS/FB_AD31}
|
||||
- {pin_num: A5, peripheral: LPUART1, signal: TX, pin_signal: PTA26/LPUART1_TX/LPSPI3_PCS2/LPI2C2_SCLS/FB_AD30}
|
||||
- {pin_num: U11, peripheral: SDHC0, signal: CMD, pin_signal: ADC0_SE12/PTD9/SDHC0_CMD/LPSPI2_SIN/LPI2C1_SCLS/TRACE_DATA0/TPM2_CH2/FXIO0_D29, slew_rate: fast, open_drain: disable,
|
||||
drive_strength: low, pull_select: up, pull_enable: enable}
|
||||
- {pin_num: P10, peripheral: SDHC0, signal: 'DATA, 0', pin_signal: ADC0_SE10/PTD7/SDHC0_D0/LPSPI2_SOUT/EMVSIM0_PD/TRACE_DATA2/TPM2_CH4/FXIO0_D27, slew_rate: fast,
|
||||
|
@ -87,6 +91,7 @@ void BOARD_InitPins(void) {
|
|||
PORT_SetPinConfig(PORTC, PIN27_IDX, &portc27_pinP6_config); /* PORTC27 (pin P6) is configured as PTC27 */
|
||||
PORT_SetPinMux(PORTC, PIN7_IDX, kPORT_MuxAlt3); /* PORTC7 (pin N2) is configured as LPUART0_RX */
|
||||
PORT_SetPinMux(PORTC, PIN8_IDX, kPORT_MuxAlt3); /* PORTC8 (pin P3) is configured as LPUART0_TX */
|
||||
|
||||
const port_pin_config_t portd10_pinP11_config = {
|
||||
kPORT_PullUp, /* Internal pull-up resistor is enabled */
|
||||
kPORT_FastSlewRate, /* Fast slew rate is configured */
|
||||
|
@ -151,6 +156,8 @@ void BOARD_InitPins(void) {
|
|||
PORT_SetPinMux(PORTA, PIN22_IDX, kPORT_MuxAsGpio); /* PORTA22 (pin D6) is configured as PTA24 */
|
||||
PORT_SetPinMux(PORTA, PIN23_IDX, kPORT_MuxAsGpio); /* PORTA23 (pin D6) is configured as PTA24 */
|
||||
PORT_SetPinMux(PORTA, PIN24_IDX, kPORT_MuxAsGpio); /* PORTA24 (pin D6) is configured as PTA24 */
|
||||
PORT_SetPinMux(PORTA, PIN25_IDX, kPORT_MuxAlt2); /* PORTA25 (pin B5) is configured as LPUART1_RX */
|
||||
PORT_SetPinMux(PORTA, PIN26_IDX, kPORT_MuxAlt2); /* PORTA26 (pin A5) is configured as LPUART1_TX */
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
|
|
|
@ -1,3 +1,6 @@
|
|||
config BSP_USING_UART0
|
||||
bool "Enable UART0 (PTC7/PTC8)"
|
||||
default y
|
||||
config BSP_USING_UART1
|
||||
bool "Enable UART1 (PTA25/PTA26)"
|
||||
default y
|
||||
|
|
|
@ -4,8 +4,9 @@
|
|||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2018/10/28 Bernard Unify UART driver for FSL library.
|
||||
* Date Author Notes
|
||||
* 2018/10/28 Bernard Unify UART driver for FSL library.
|
||||
* 2019/09/07 niannianyouyu Add the driver of UART1
|
||||
*/
|
||||
|
||||
#include <rthw.h>
|
||||
|
@ -54,6 +55,15 @@ void LPUART0_IRQHandler(void)
|
|||
}
|
||||
#endif
|
||||
|
||||
#if defined(BSP_USING_UART1)
|
||||
struct rt_serial_device serial1;
|
||||
|
||||
void LPUART1_IRQHandler(void)
|
||||
{
|
||||
uart_isr(&serial1);
|
||||
}
|
||||
#endif
|
||||
|
||||
static const struct fsl_uart uarts[] =
|
||||
{
|
||||
#ifdef BSP_USING_UART0
|
||||
|
@ -63,9 +73,18 @@ static const struct fsl_uart uarts[] =
|
|||
&serial0,
|
||||
"uart0",
|
||||
},
|
||||
#ifdef BSP_USING_UART1
|
||||
{
|
||||
LPUART1,
|
||||
LPUART1_IRQn,
|
||||
&serial1,
|
||||
"uart1",
|
||||
},
|
||||
#endif
|
||||
#endif
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* UART Initiation
|
||||
*/
|
||||
|
@ -146,8 +165,14 @@ static rt_err_t uart_configure(struct rt_serial_device *serial, struct serial_co
|
|||
|
||||
CLOCK_SetIpSrc(kCLOCK_Lpuart0, kCLOCK_IpSrcFircAsync);
|
||||
|
||||
uint32_t uartClkSrcFreq = CLOCK_GetIpFreq(kCLOCK_Lpuart0);
|
||||
LPUART_Init(uart->uart_base, &config, uartClkSrcFreq);
|
||||
uint32_t uartClkSrcFreq0 = CLOCK_GetIpFreq(kCLOCK_Lpuart0);
|
||||
LPUART_Init(uart->uart_base, &config, uartClkSrcFreq0);
|
||||
LPUART_EnableInterrupts(uart->uart_base, kLPUART_RxDataRegFullInterruptEnable);
|
||||
|
||||
CLOCK_SetIpSrc(kCLOCK_Lpuart1, kCLOCK_IpSrcFircAsync);
|
||||
|
||||
uint32_t uartClkSrcFreq1 = CLOCK_GetIpFreq(kCLOCK_Lpuart1);
|
||||
LPUART_Init(uart->uart_base, &config, uartClkSrcFreq1);
|
||||
LPUART_EnableInterrupts(uart->uart_base, kLPUART_RxDataRegFullInterruptEnable);
|
||||
|
||||
return RT_EOK;
|
||||
|
|
Loading…
Reference in New Issue