diff --git a/bsp/simulator/applications/application.c b/bsp/simulator/applications/application.c index a3b1a14b67..2fca5dd121 100644 --- a/bsp/simulator/applications/application.c +++ b/bsp/simulator/applications/application.c @@ -20,6 +20,11 @@ void rt_init_thread_entry(void* parameter) { +#ifdef RT_USING_LWIP + extern void pcap_netif_hw_init(void); + pcap_netif_hw_init(); +#endif + /* initialization RT-Thread Components */ rt_components_init(); diff --git a/bsp/simulator/pcap/Include/Packet32.h b/bsp/simulator/pcap/Include/Packet32.h new file mode 100644 index 0000000000..1e0eacd77d --- /dev/null +++ b/bsp/simulator/pcap/Include/Packet32.h @@ -0,0 +1,359 @@ +/* + * Copyright (c) 1999 - 2005 NetGroup, Politecnico di Torino (Italy) + * Copyright (c) 2005 - 2007 CACE Technologies, Davis (California) + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Politecnico di Torino, CACE Technologies + * nor the names of its contributors may be used to endorse or promote + * products derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/** @ingroup packetapi + * @{ + */ + +/** @defgroup packet32h Packet.dll definitions and data structures + * Packet32.h contains the data structures and the definitions used by packet.dll. + * The file is used both by the Win9x and the WinNTx versions of packet.dll, and can be included + * by the applications that use the functions of this library + * @{ + */ + +#ifndef __PACKET32 +#define __PACKET32 + +#include + +#ifdef HAVE_AIRPCAP_API +#include +#else +#if !defined(AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_) +#define AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_ +typedef struct _AirpcapHandle *PAirpcapHandle; +#endif /* AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_ */ +#endif /* HAVE_AIRPCAP_API */ + +#ifdef HAVE_DAG_API +#include +#endif /* HAVE_DAG_API */ + +// Working modes +#define PACKET_MODE_CAPT 0x0 ///< Capture mode +#define PACKET_MODE_STAT 0x1 ///< Statistical mode +#define PACKET_MODE_MON 0x2 ///< Monitoring mode +#define PACKET_MODE_DUMP 0x10 ///< Dump mode +#define PACKET_MODE_STAT_DUMP MODE_DUMP | MODE_STAT ///< Statistical dump Mode + + +/// Alignment macro. Defines the alignment size. +#define Packet_ALIGNMENT sizeof(int) +/// Alignment macro. Rounds up to the next even multiple of Packet_ALIGNMENT. +#define Packet_WORDALIGN(x) (((x)+(Packet_ALIGNMENT-1))&~(Packet_ALIGNMENT-1)) + +#define NdisMediumNull -1 ///< Custom linktype: NDIS doesn't provide an equivalent +#define NdisMediumCHDLC -2 ///< Custom linktype: NDIS doesn't provide an equivalent +#define NdisMediumPPPSerial -3 ///< Custom linktype: NDIS doesn't provide an equivalent +#define NdisMediumBare80211 -4 ///< Custom linktype: NDIS doesn't provide an equivalent +#define NdisMediumRadio80211 -5 ///< Custom linktype: NDIS doesn't provide an equivalent +#define NdisMediumPpi -6 ///< Custom linktype: NDIS doesn't provide an equivalent + +// Loopback behaviour definitions +#define NPF_DISABLE_LOOPBACK 1 ///< Drop the packets sent by the NPF driver +#define NPF_ENABLE_LOOPBACK 2 ///< Capture the packets sent by the NPF driver + +/*! + \brief Network type structure. + + This structure is used by the PacketGetNetType() function to return information on the current adapter's type and speed. +*/ +typedef struct NetType +{ + UINT LinkType; ///< The MAC of the current network adapter (see function PacketGetNetType() for more information) + ULONGLONG LinkSpeed; ///< The speed of the network in bits per second +}NetType; + + +//some definitions stolen from libpcap + +#ifndef BPF_MAJOR_VERSION + +/*! + \brief A BPF pseudo-assembly program. + + The program will be injected in the kernel by the PacketSetBPF() function and applied to every incoming packet. +*/ +struct bpf_program +{ + UINT bf_len; ///< Indicates the number of instructions of the program, i.e. the number of struct bpf_insn that will follow. + struct bpf_insn *bf_insns; ///< A pointer to the first instruction of the program. +}; + +/*! + \brief A single BPF pseudo-instruction. + + bpf_insn contains a single instruction for the BPF register-machine. It is used to send a filter program to the driver. +*/ +struct bpf_insn +{ + USHORT code; ///< Instruction type and addressing mode. + UCHAR jt; ///< Jump if true + UCHAR jf; ///< Jump if false + int k; ///< Generic field used for various purposes. +}; + +/*! + \brief Structure that contains a couple of statistics values on the current capture. + + It is used by packet.dll to return statistics about a capture session. +*/ +struct bpf_stat +{ + UINT bs_recv; ///< Number of packets that the driver received from the network adapter + ///< from the beginning of the current capture. This value includes the packets + ///< lost by the driver. + UINT bs_drop; ///< number of packets that the driver lost from the beginning of a capture. + ///< Basically, a packet is lost when the the buffer of the driver is full. + ///< In this situation the packet cannot be stored and the driver rejects it. + UINT ps_ifdrop; ///< drops by interface. XXX not yet supported + UINT bs_capt; ///< number of packets that pass the filter, find place in the kernel buffer and + ///< thus reach the application. +}; + +/*! + \brief Packet header. + + This structure defines the header associated with every packet delivered to the application. +*/ +struct bpf_hdr +{ + struct timeval bh_tstamp; ///< The timestamp associated with the captured packet. + ///< It is stored in a TimeVal structure. + UINT bh_caplen; ///< Length of captured portion. The captured portion can be different + ///< from the original packet, because it is possible (with a proper filter) + ///< to instruct the driver to capture only a portion of the packets. + UINT bh_datalen; ///< Original length of packet + USHORT bh_hdrlen; ///< Length of bpf header (this struct plus alignment padding). In some cases, + ///< a padding could be added between the end of this structure and the packet + ///< data for performance reasons. This filed can be used to retrieve the actual data + ///< of the packet. +}; + +/*! + \brief Dump packet header. + + This structure defines the header associated with the packets in a buffer to be used with PacketSendPackets(). + It is simpler than the bpf_hdr, because it corresponds to the header associated by WinPcap and libpcap to a + packet in a dump file. This makes straightforward sending WinPcap dump files to the network. +*/ +struct dump_bpf_hdr{ + struct timeval ts; ///< Time stamp of the packet + UINT caplen; ///< Length of captured portion. The captured portion can smaller than the + ///< the original packet, because it is possible (with a proper filter) to + ///< instruct the driver to capture only a portion of the packets. + UINT len; ///< Length of the original packet (off wire). +}; + + +#endif + +struct bpf_stat; + +#define DOSNAMEPREFIX TEXT("Packet_") ///< Prefix added to the adapters device names to create the WinPcap devices +#define MAX_LINK_NAME_LENGTH 64 //< Maximum length of the devices symbolic links +#define NMAX_PACKET 65535 + +/*! + \brief Addresses of a network adapter. + + This structure is used by the PacketGetNetInfoEx() function to return the IP addresses associated with + an adapter. +*/ +typedef struct npf_if_addr { + struct sockaddr_storage IPAddress; ///< IP address. + struct sockaddr_storage SubnetMask; ///< Netmask for that address. + struct sockaddr_storage Broadcast; ///< Broadcast address. +}npf_if_addr; + + +#define ADAPTER_NAME_LENGTH 256 + 12 ///< Maximum length for the name of an adapter. The value is the same used by the IP Helper API. +#define ADAPTER_DESC_LENGTH 128 ///< Maximum length for the description of an adapter. The value is the same used by the IP Helper API. +#define MAX_MAC_ADDR_LENGTH 8 ///< Maximum length for the link layer address of an adapter. The value is the same used by the IP Helper API. +#define MAX_NETWORK_ADDRESSES 16 ///< Maximum length for the link layer address of an adapter. The value is the same used by the IP Helper API. + + +typedef struct WAN_ADAPTER_INT WAN_ADAPTER; ///< Describes an opened wan (dialup, VPN...) network adapter using the NetMon API +typedef WAN_ADAPTER *PWAN_ADAPTER; ///< Describes an opened wan (dialup, VPN...) network adapter using the NetMon API + +#define INFO_FLAG_NDIS_ADAPTER 0 ///< Flag for ADAPTER_INFO: this is a traditional ndis adapter +#define INFO_FLAG_NDISWAN_ADAPTER 1 ///< Flag for ADAPTER_INFO: this is a NdisWan adapter, and it's managed by WANPACKET +#define INFO_FLAG_DAG_CARD 2 ///< Flag for ADAPTER_INFO: this is a DAG card +#define INFO_FLAG_DAG_FILE 6 ///< Flag for ADAPTER_INFO: this is a DAG file +#define INFO_FLAG_DONT_EXPORT 8 ///< Flag for ADAPTER_INFO: when this flag is set, the adapter will not be listed or openend by winpcap. This allows to prevent exporting broken network adapters, like for example FireWire ones. +#define INFO_FLAG_AIRPCAP_CARD 16 ///< Flag for ADAPTER_INFO: this is an airpcap card +#define INFO_FLAG_NPFIM_DEVICE 32 + +/*! + \brief Describes an opened network adapter. + + This structure is the most important for the functioning of packet.dll, but the great part of its fields + should be ignored by the user, since the library offers functions that avoid to cope with low-level parameters +*/ +typedef struct _ADAPTER { + HANDLE hFile; ///< \internal Handle to an open instance of the NPF driver. + CHAR SymbolicLink[MAX_LINK_NAME_LENGTH]; ///< \internal A string containing the name of the network adapter currently opened. + int NumWrites; ///< \internal Number of times a packets written on this adapter will be repeated + ///< on the wire. + HANDLE ReadEvent; ///< A notification event associated with the read calls on the adapter. + ///< It can be passed to standard Win32 functions (like WaitForSingleObject + ///< or WaitForMultipleObjects) to wait until the driver's buffer contains some + ///< data. It is particularly useful in GUI applications that need to wait + ///< concurrently on several events. In Windows NT/2000 the PacketSetMinToCopy() + ///< function can be used to define the minimum amount of data in the kernel buffer + ///< that will cause the event to be signalled. + + UINT ReadTimeOut; ///< \internal The amount of time after which a read on the driver will be released and + ///< ReadEvent will be signaled, also if no packets were captured + CHAR Name[ADAPTER_NAME_LENGTH]; + PWAN_ADAPTER pWanAdapter; + UINT Flags; ///< Adapter's flags. Tell if this adapter must be treated in a different way, using the Netmon API or the dagc API. + +#ifdef HAVE_AIRPCAP_API + PAirpcapHandle AirpcapAd; +#endif // HAVE_AIRPCAP_API + +#ifdef HAVE_NPFIM_API + void* NpfImHandle; +#endif // HAVE_NPFIM_API + +#ifdef HAVE_DAG_API + dagc_t *pDagCard; ///< Pointer to the dagc API adapter descriptor for this adapter + PCHAR DagBuffer; ///< Pointer to the buffer with the packets that is received from the DAG card + struct timeval DagReadTimeout; ///< Read timeout. The dagc API requires a timeval structure + unsigned DagFcsLen; ///< Length of the frame check sequence attached to any packet by the card. Obtained from the registry + DWORD DagFastProcess; ///< True if the user requests fast capture processing on this card. Higher level applications can use this value to provide a faster but possibly unprecise capture (for example, libpcap doesn't convert the timestamps). +#endif // HAVE_DAG_API +} ADAPTER, *LPADAPTER; + +/*! + \brief Structure that contains a group of packets coming from the driver. + + This structure defines the header associated with every packet delivered to the application. +*/ +typedef struct _PACKET { + HANDLE hEvent; ///< \deprecated Still present for compatibility with old applications. + OVERLAPPED OverLapped; ///< \deprecated Still present for compatibility with old applications. + PVOID Buffer; ///< Buffer with containing the packets. See the PacketReceivePacket() for + ///< details about the organization of the data in this buffer + UINT Length; ///< Length of the buffer + DWORD ulBytesReceived; ///< Number of valid bytes present in the buffer, i.e. amount of data + ///< received by the last call to PacketReceivePacket() + BOOLEAN bIoComplete; ///< \deprecated Still present for compatibility with old applications. +} PACKET, *LPPACKET; + +/*! + \brief Structure containing an OID request. + + It is used by the PacketRequest() function to send an OID to the interface card driver. + It can be used, for example, to retrieve the status of the error counters on the adapter, its MAC address, + the list of the multicast groups defined on it, and so on. +*/ +struct _PACKET_OID_DATA { + ULONG Oid; ///< OID code. See the Microsoft DDK documentation or the file ntddndis.h + ///< for a complete list of valid codes. + ULONG Length; ///< Length of the data field + UCHAR Data[1]; ///< variable-lenght field that contains the information passed to or received + ///< from the adapter. +}; +typedef struct _PACKET_OID_DATA PACKET_OID_DATA, *PPACKET_OID_DATA; + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @} + */ + +/* +BOOLEAN QueryWinPcapRegistryStringA(CHAR *SubKeyName, + CHAR *Value, + UINT *pValueLen, + CHAR *DefaultVal); + +BOOLEAN QueryWinPcapRegistryStringW(WCHAR *SubKeyName, + WCHAR *Value, + UINT *pValueLen, + WCHAR *DefaultVal); +*/ + +//--------------------------------------------------------------------------- +// EXPORTED FUNCTIONS +//--------------------------------------------------------------------------- + +PCHAR PacketGetVersion(); +PCHAR PacketGetDriverVersion(); +BOOLEAN PacketSetMinToCopy(LPADAPTER AdapterObject,int nbytes); +BOOLEAN PacketSetNumWrites(LPADAPTER AdapterObject,int nwrites); +BOOLEAN PacketSetMode(LPADAPTER AdapterObject,int mode); +BOOLEAN PacketSetReadTimeout(LPADAPTER AdapterObject,int timeout); +BOOLEAN PacketSetBpf(LPADAPTER AdapterObject,struct bpf_program *fp); +BOOLEAN PacketSetLoopbackBehavior(LPADAPTER AdapterObject, UINT LoopbackBehavior); +INT PacketSetSnapLen(LPADAPTER AdapterObject,int snaplen); +BOOLEAN PacketGetStats(LPADAPTER AdapterObject,struct bpf_stat *s); +BOOLEAN PacketGetStatsEx(LPADAPTER AdapterObject,struct bpf_stat *s); +BOOLEAN PacketSetBuff(LPADAPTER AdapterObject,int dim); +BOOLEAN PacketGetNetType (LPADAPTER AdapterObject,NetType *type); +LPADAPTER PacketOpenAdapter(PCHAR AdapterName); +BOOLEAN PacketSendPacket(LPADAPTER AdapterObject,LPPACKET pPacket,BOOLEAN Sync); +INT PacketSendPackets(LPADAPTER AdapterObject,PVOID PacketBuff,ULONG Size, BOOLEAN Sync); +LPPACKET PacketAllocatePacket(void); +VOID PacketInitPacket(LPPACKET lpPacket,PVOID Buffer,UINT Length); +VOID PacketFreePacket(LPPACKET lpPacket); +BOOLEAN PacketReceivePacket(LPADAPTER AdapterObject,LPPACKET lpPacket,BOOLEAN Sync); +BOOLEAN PacketSetHwFilter(LPADAPTER AdapterObject,ULONG Filter); +BOOLEAN PacketGetAdapterNames(PTSTR pStr,PULONG BufferSize); +BOOLEAN PacketGetNetInfoEx(PCHAR AdapterName, npf_if_addr* buffer, PLONG NEntries); +BOOLEAN PacketRequest(LPADAPTER AdapterObject,BOOLEAN Set,PPACKET_OID_DATA OidData); +HANDLE PacketGetReadEvent(LPADAPTER AdapterObject); +BOOLEAN PacketSetDumpName(LPADAPTER AdapterObject, void *name, int len); +BOOLEAN PacketSetDumpLimits(LPADAPTER AdapterObject, UINT maxfilesize, UINT maxnpacks); +BOOLEAN PacketIsDumpEnded(LPADAPTER AdapterObject, BOOLEAN sync); +BOOL PacketStopDriver(); +VOID PacketCloseAdapter(LPADAPTER lpAdapter); +BOOLEAN PacketStartOem(PCHAR errorString, UINT errorStringLength); +BOOLEAN PacketStartOemEx(PCHAR errorString, UINT errorStringLength, ULONG flags); +PAirpcapHandle PacketGetAirPcapHandle(LPADAPTER AdapterObject); + +// +// Used by PacketStartOemEx +// +#define PACKET_START_OEM_NO_NETMON 0x00000001 + +#ifdef __cplusplus +} +#endif + +#endif //__PACKET32 diff --git a/bsp/simulator/pcap/Include/Win32-Extensions.h b/bsp/simulator/pcap/Include/Win32-Extensions.h new file mode 100644 index 0000000000..d3b063b0fd --- /dev/null +++ b/bsp/simulator/pcap/Include/Win32-Extensions.h @@ -0,0 +1,113 @@ +/* + * Copyright (c) 1999 - 2005 NetGroup, Politecnico di Torino (Italy) + * Copyright (c) 2005 - 2006 CACE Technologies, Davis (California) + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Politecnico di Torino, CACE Technologies + * nor the names of its contributors may be used to endorse or promote + * products derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef __WIN32_EXTENSIONS_H__ +#define __WIN32_EXTENSIONS_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Definitions */ + +/*! + \brief A queue of raw packets that will be sent to the network with pcap_sendqueue_transmit(). +*/ +struct pcap_send_queue +{ + u_int maxlen; ///< Maximum size of the the queue, in bytes. This variable contains the size of the buffer field. + u_int len; ///< Current size of the queue, in bytes. + char *buffer; ///< Buffer containing the packets to be sent. +}; + +typedef struct pcap_send_queue pcap_send_queue; + +/*! + \brief This typedef is a support for the pcap_get_airpcap_handle() function +*/ +#if !defined(AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_) +#define AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_ +typedef struct _AirpcapHandle *PAirpcapHandle; +#endif + +#define BPF_MEM_EX_IMM 0xc0 +#define BPF_MEM_EX_IND 0xe0 + +/*used for ST*/ +#define BPF_MEM_EX 0xc0 +#define BPF_TME 0x08 + +#define BPF_LOOKUP 0x90 +#define BPF_EXECUTE 0xa0 +#define BPF_INIT 0xb0 +#define BPF_VALIDATE 0xc0 +#define BPF_SET_ACTIVE 0xd0 +#define BPF_RESET 0xe0 +#define BPF_SET_MEMORY 0x80 +#define BPF_GET_REGISTER_VALUE 0x70 +#define BPF_SET_REGISTER_VALUE 0x60 +#define BPF_SET_WORKING 0x50 +#define BPF_SET_ACTIVE_READ 0x40 +#define BPF_SET_AUTODELETION 0x30 +#define BPF_SEPARATION 0xff + +/* Prototypes */ +pcap_send_queue* pcap_sendqueue_alloc(u_int memsize); + +void pcap_sendqueue_destroy(pcap_send_queue* queue); + +int pcap_sendqueue_queue(pcap_send_queue* queue, const struct pcap_pkthdr *pkt_header, const u_char *pkt_data); + +u_int pcap_sendqueue_transmit(pcap_t *p, pcap_send_queue* queue, int sync); + +HANDLE pcap_getevent(pcap_t *p); + +struct pcap_stat *pcap_stats_ex(pcap_t *p, int *pcap_stat_size); + +int pcap_setuserbuffer(pcap_t *p, int size); + +int pcap_live_dump(pcap_t *p, char *filename, int maxsize, int maxpacks); + +int pcap_live_dump_ended(pcap_t *p, int sync); + +int pcap_offline_filter(struct bpf_program *prog, const struct pcap_pkthdr *header, const u_char *pkt_data); + +int pcap_start_oem(char* err_str, int flags); + +PAirpcapHandle pcap_get_airpcap_handle(pcap_t *p); + +#ifdef __cplusplus +} +#endif + +#endif //__WIN32_EXTENSIONS_H__ diff --git a/bsp/simulator/pcap/Include/bittypes.h b/bsp/simulator/pcap/Include/bittypes.h new file mode 100644 index 0000000000..558a0b5c0d --- /dev/null +++ b/bsp/simulator/pcap/Include/bittypes.h @@ -0,0 +1,137 @@ +/* + * Copyright (C) 1999 WIDE Project. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the project nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ +#ifndef _BITTYPES_H +#define _BITTYPES_H + +#ifndef HAVE_U_INT8_T + +#if SIZEOF_CHAR == 1 +typedef unsigned char u_int8_t; +typedef signed char int8_t; +#elif SIZEOF_INT == 1 +typedef unsigned int u_int8_t; +typedef signed int int8_t; +#else /* XXX */ +#error "there's no appropriate type for u_int8_t" +#endif +#define HAVE_U_INT8_T 1 +#define HAVE_INT8_T 1 + +#endif /* HAVE_U_INT8_T */ + +#ifndef HAVE_U_INT16_T + +#if SIZEOF_SHORT == 2 +typedef unsigned short u_int16_t; +typedef signed short int16_t; +#elif SIZEOF_INT == 2 +typedef unsigned int u_int16_t; +typedef signed int int16_t; +#elif SIZEOF_CHAR == 2 +typedef unsigned char u_int16_t; +typedef signed char int16_t; +#else /* XXX */ +#error "there's no appropriate type for u_int16_t" +#endif +#define HAVE_U_INT16_T 1 +#define HAVE_INT16_T 1 + +#endif /* HAVE_U_INT16_T */ + +#ifndef HAVE_U_INT32_T + +#if SIZEOF_INT == 4 +typedef unsigned int u_int32_t; +typedef signed int int32_t; +#elif SIZEOF_LONG == 4 +typedef unsigned long u_int32_t; +typedef signed long int32_t; +#elif SIZEOF_SHORT == 4 +typedef unsigned short u_int32_t; +typedef signed short int32_t; +#else /* XXX */ +#error "there's no appropriate type for u_int32_t" +#endif +#define HAVE_U_INT32_T 1 +#define HAVE_INT32_T 1 + +#endif /* HAVE_U_INT32_T */ + +#ifndef HAVE_U_INT64_T +#if SIZEOF_LONG_LONG == 8 +typedef unsigned long long u_int64_t; +typedef long long int64_t; +#elif defined(_MSC_EXTENSIONS) +typedef unsigned _int64 u_int64_t; +typedef _int64 int64_t; +#elif SIZEOF_INT == 8 +typedef unsigned int u_int64_t; +#elif SIZEOF_LONG == 8 +typedef unsigned long u_int64_t; +#elif SIZEOF_SHORT == 8 +typedef unsigned short u_int64_t; +#else /* XXX */ +#error "there's no appropriate type for u_int64_t" +#endif + +#endif /* HAVE_U_INT64_T */ + +#ifndef PRId64 +#ifdef _MSC_EXTENSIONS +#define PRId64 "I64d" +#else /* _MSC_EXTENSIONS */ +#define PRId64 "lld" +#endif /* _MSC_EXTENSIONS */ +#endif /* PRId64 */ + +#ifndef PRIo64 +#ifdef _MSC_EXTENSIONS +#define PRIo64 "I64o" +#else /* _MSC_EXTENSIONS */ +#define PRIo64 "llo" +#endif /* _MSC_EXTENSIONS */ +#endif /* PRIo64 */ + +#ifndef PRIx64 +#ifdef _MSC_EXTENSIONS +#define PRIx64 "I64x" +#else /* _MSC_EXTENSIONS */ +#define PRIx64 "llx" +#endif /* _MSC_EXTENSIONS */ +#endif /* PRIx64 */ + +#ifndef PRIu64 +#ifdef _MSC_EXTENSIONS +#define PRIu64 "I64u" +#else /* _MSC_EXTENSIONS */ +#define PRIu64 "llu" +#endif /* _MSC_EXTENSIONS */ +#endif /* PRIu64 */ + +#endif /* _BITTYPES_H */ diff --git a/bsp/simulator/pcap/Include/ip6_misc.h b/bsp/simulator/pcap/Include/ip6_misc.h new file mode 100644 index 0000000000..562fa6184e --- /dev/null +++ b/bsp/simulator/pcap/Include/ip6_misc.h @@ -0,0 +1,163 @@ +/* + * Copyright (c) 1993, 1994, 1997 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that: (1) source code distributions + * retain the above copyright notice and this paragraph in its entirety, (2) + * distributions including binary code include the above copyright notice and + * this paragraph in its entirety in the documentation or other materials + * provided with the distribution, and (3) all advertising materials mentioning + * features or use of this software display the following acknowledgement: + * ``This product includes software developed by the University of California, + * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of + * the University nor the names of its contributors may be used to endorse + * or promote products derived from this software without specific prior + * written permission. + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. + * + * @(#) $Header: /tcpdump/master/libpcap/Win32/Include/ip6_misc.h,v 1.5 2006-01-22 18:02:18 gianluca Exp $ (LBL) + */ + +/* + * This file contains a collage of declarations for IPv6 from FreeBSD not present in Windows + */ + +#include + +#include + +#ifndef __MINGW32__ +#define IN_MULTICAST(a) IN_CLASSD(a) +#endif + +#define IN_EXPERIMENTAL(a) ((((u_int32_t) (a)) & 0xf0000000) == 0xf0000000) + +#define IN_LOOPBACKNET 127 + +#if defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF) +/* IPv6 address */ +struct in6_addr + { + union + { + u_int8_t u6_addr8[16]; + u_int16_t u6_addr16[8]; + u_int32_t u6_addr32[4]; + } in6_u; +#define s6_addr in6_u.u6_addr8 +#define s6_addr16 in6_u.u6_addr16 +#define s6_addr32 in6_u.u6_addr32 +#define s6_addr64 in6_u.u6_addr64 + }; + +#define IN6ADDR_ANY_INIT { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } +#define IN6ADDR_LOOPBACK_INIT { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1 } +#endif /* __MINGW32__ */ + + +#if (defined _MSC_VER) || (defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF)) +typedef unsigned short sa_family_t; +#endif + + +#if defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF) + +#define __SOCKADDR_COMMON(sa_prefix) \ + sa_family_t sa_prefix##family + +/* Ditto, for IPv6. */ +struct sockaddr_in6 + { + __SOCKADDR_COMMON (sin6_); + u_int16_t sin6_port; /* Transport layer port # */ + u_int32_t sin6_flowinfo; /* IPv6 flow information */ + struct in6_addr sin6_addr; /* IPv6 address */ + }; + +#define IN6_IS_ADDR_V4MAPPED(a) \ + ((((u_int32_t *) (a))[0] == 0) && (((u_int32_t *) (a))[1] == 0) && \ + (((u_int32_t *) (a))[2] == htonl (0xffff))) + +#define IN6_IS_ADDR_MULTICAST(a) (((u_int8_t *) (a))[0] == 0xff) + +#define IN6_IS_ADDR_LINKLOCAL(a) \ + ((((u_int32_t *) (a))[0] & htonl (0xffc00000)) == htonl (0xfe800000)) + +#define IN6_IS_ADDR_LOOPBACK(a) \ + (((u_int32_t *) (a))[0] == 0 && ((u_int32_t *) (a))[1] == 0 && \ + ((u_int32_t *) (a))[2] == 0 && ((u_int32_t *) (a))[3] == htonl (1)) +#endif /* __MINGW32__ */ + +#define ip6_vfc ip6_ctlun.ip6_un2_vfc +#define ip6_flow ip6_ctlun.ip6_un1.ip6_un1_flow +#define ip6_plen ip6_ctlun.ip6_un1.ip6_un1_plen +#define ip6_nxt ip6_ctlun.ip6_un1.ip6_un1_nxt +#define ip6_hlim ip6_ctlun.ip6_un1.ip6_un1_hlim +#define ip6_hops ip6_ctlun.ip6_un1.ip6_un1_hlim + +#define nd_rd_type nd_rd_hdr.icmp6_type +#define nd_rd_code nd_rd_hdr.icmp6_code +#define nd_rd_cksum nd_rd_hdr.icmp6_cksum +#define nd_rd_reserved nd_rd_hdr.icmp6_data32[0] + +/* + * IPV6 extension headers + */ +#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */ +#define IPPROTO_IPV6 41 /* IPv6 header. */ +#define IPPROTO_ROUTING 43 /* IPv6 routing header */ +#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */ +#define IPPROTO_ESP 50 /* encapsulating security payload */ +#define IPPROTO_AH 51 /* authentication header */ +#define IPPROTO_ICMPV6 58 /* ICMPv6 */ +#define IPPROTO_NONE 59 /* IPv6 no next header */ +#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */ +#define IPPROTO_PIM 103 /* Protocol Independent Multicast. */ + +#define IPV6_RTHDR_TYPE_0 0 + +/* Option types and related macros */ +#define IP6OPT_PAD1 0x00 /* 00 0 00000 */ +#define IP6OPT_PADN 0x01 /* 00 0 00001 */ +#define IP6OPT_JUMBO 0xC2 /* 11 0 00010 = 194 */ +#define IP6OPT_JUMBO_LEN 6 +#define IP6OPT_ROUTER_ALERT 0x05 /* 00 0 00101 */ + +#define IP6OPT_RTALERT_LEN 4 +#define IP6OPT_RTALERT_MLD 0 /* Datagram contains an MLD message */ +#define IP6OPT_RTALERT_RSVP 1 /* Datagram contains an RSVP message */ +#define IP6OPT_RTALERT_ACTNET 2 /* contains an Active Networks msg */ +#define IP6OPT_MINLEN 2 + +#define IP6OPT_BINDING_UPDATE 0xc6 /* 11 0 00110 */ +#define IP6OPT_BINDING_ACK 0x07 /* 00 0 00111 */ +#define IP6OPT_BINDING_REQ 0x08 /* 00 0 01000 */ +#define IP6OPT_HOME_ADDRESS 0xc9 /* 11 0 01001 */ +#define IP6OPT_EID 0x8a /* 10 0 01010 */ + +#define IP6OPT_TYPE(o) ((o) & 0xC0) +#define IP6OPT_TYPE_SKIP 0x00 +#define IP6OPT_TYPE_DISCARD 0x40 +#define IP6OPT_TYPE_FORCEICMP 0x80 +#define IP6OPT_TYPE_ICMP 0xC0 + +#define IP6OPT_MUTABLE 0x20 + + +#if defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF) +#ifndef EAI_ADDRFAMILY +struct addrinfo { + int ai_flags; /* AI_PASSIVE, AI_CANONNAME */ + int ai_family; /* PF_xxx */ + int ai_socktype; /* SOCK_xxx */ + int ai_protocol; /* 0 or IPPROTO_xxx for IPv4 and IPv6 */ + size_t ai_addrlen; /* length of ai_addr */ + char *ai_canonname; /* canonical name for hostname */ + struct sockaddr *ai_addr; /* binary address */ + struct addrinfo *ai_next; /* next structure in linked list */ +}; +#endif +#endif /* __MINGW32__ */ diff --git a/bsp/simulator/pcap/Include/pcap-bpf.h b/bsp/simulator/pcap/Include/pcap-bpf.h new file mode 100644 index 0000000000..5fe129dbb4 --- /dev/null +++ b/bsp/simulator/pcap/Include/pcap-bpf.h @@ -0,0 +1,47 @@ +/*- + * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 + * The Regents of the University of California. All rights reserved. + * + * This code is derived from the Stanford/CMU enet packet filter, + * (net/enet.c) distributed as part of 4.3BSD, and code contributed + * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence + * Berkeley Laboratory. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#) $Header: /tcpdump/master/libpcap/pcap-bpf.h,v 1.50 2007/04/01 21:43:55 guy Exp $ (LBL) + */ + +/* + * For backwards compatibility. + * + * Note to OS vendors: do NOT get rid of this file! Some applications + * might expect to be able to include . + */ +#include diff --git a/bsp/simulator/pcap/Include/pcap-namedb.h b/bsp/simulator/pcap/Include/pcap-namedb.h new file mode 100644 index 0000000000..80a2f00401 --- /dev/null +++ b/bsp/simulator/pcap/Include/pcap-namedb.h @@ -0,0 +1,42 @@ +/* + * Copyright (c) 1994, 1996 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the Computer Systems + * Engineering Group at Lawrence Berkeley Laboratory. + * 4. Neither the name of the University nor of the Laboratory may be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#) $Header: /tcpdump/master/libpcap/pcap-namedb.h,v 1.13 2006/10/04 18:13:32 guy Exp $ (LBL) + */ + +/* + * For backwards compatibility. + * + * Note to OS vendors: do NOT get rid of this file! Some applications + * might expect to be able to include . + */ +#include diff --git a/bsp/simulator/pcap/Include/pcap-stdinc.h b/bsp/simulator/pcap/Include/pcap-stdinc.h new file mode 100644 index 0000000000..417604177b --- /dev/null +++ b/bsp/simulator/pcap/Include/pcap-stdinc.h @@ -0,0 +1,93 @@ +/* + * Copyright (c) 2002 - 2005 NetGroup, Politecnico di Torino (Italy) + * Copyright (c) 2005 - 2009 CACE Technologies, Inc. Davis (California) + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Politecnico di Torino nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * @(#) $Header: /tcpdump/master/libpcap/pcap-stdinc.h,v 1.10.2.1 2008-10-06 15:38:39 gianluca Exp $ (LBL) + */ + +#define SIZEOF_CHAR 1 +#define SIZEOF_SHORT 2 +#define SIZEOF_INT 4 +#ifndef _MSC_EXTENSIONS +#define SIZEOF_LONG_LONG 8 +#endif + +/* + * Avoids a compiler warning in case this was already defined + * (someone defined _WINSOCKAPI_ when including 'windows.h', in order + * to prevent it from including 'winsock.h') + */ +#ifdef _WINSOCKAPI_ +#undef _WINSOCKAPI_ +#endif +#include + +#include + +#include "bittypes.h" +#include +#include + +#ifndef __MINGW32__ +#include "IP6_misc.h" +#endif + +#define caddr_t char* + +#if _MSC_VER < 1500 +#define snprintf _snprintf +#define vsnprintf _vsnprintf +#define strdup _strdup +#endif + +#define inline __inline + +#ifdef __MINGW32__ +#include +#else /*__MINGW32__*/ +/* MSVC compiler */ +#ifndef _UINTPTR_T_DEFINED +#ifdef _WIN64 +typedef unsigned __int64 uintptr_t; +#else +typedef _W64 unsigned int uintptr_t; +#endif +#define _UINTPTR_T_DEFINED +#endif + +#ifndef _INTPTR_T_DEFINED +#ifdef _WIN64 +typedef __int64 intptr_t; +#else +typedef _W64 int intptr_t; +#endif +#define _INTPTR_T_DEFINED +#endif + +#endif /*__MINGW32__*/ diff --git a/bsp/simulator/pcap/Include/pcap.h b/bsp/simulator/pcap/Include/pcap.h new file mode 100644 index 0000000000..935f9494c1 --- /dev/null +++ b/bsp/simulator/pcap/Include/pcap.h @@ -0,0 +1,45 @@ +/* + * Copyright (c) 1993, 1994, 1995, 1996, 1997 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the Computer Systems + * Engineering Group at Lawrence Berkeley Laboratory. + * 4. Neither the name of the University nor of the Laboratory may be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#) $Header: /tcpdump/master/libpcap/pcap.h,v 1.59 2006/10/04 18:09:22 guy Exp $ (LBL) + */ + +/* + * For backwards compatibility. + * + * Note to OS vendors: do NOT get rid of this file! Many applications + * expect to be able to include , and at least some of them + * go through contortions in their configure scripts to try to detect + * OSes that have "helpfully" moved pcap.h to without + * leaving behind a file. + */ +#include diff --git a/bsp/simulator/pcap/Include/pcap/bluetooth.h b/bsp/simulator/pcap/Include/pcap/bluetooth.h new file mode 100644 index 0000000000..7bf65df034 --- /dev/null +++ b/bsp/simulator/pcap/Include/pcap/bluetooth.h @@ -0,0 +1,48 @@ +/* + * Copyright (c) 2006 Paolo Abeni (Italy) + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * bluetooth data struct + * By Paolo Abeni + * + * @(#) $Header: /tcpdump/master/libpcap/pcap/bluetooth.h,v 1.1 2007/09/22 02:10:17 guy Exp $ + */ + +#ifndef _PCAP_BLUETOOTH_STRUCTS_H__ +#define _PCAP_BLUETOOTH_STRUCTS_H__ + +/* + * Header prepended libpcap to each bluetooth h:4 frame. + * fields are in network byte order + */ +typedef struct _pcap_bluetooth_h4_header { + u_int32_t direction; /* if first bit is set direction is incoming */ +} pcap_bluetooth_h4_header; + + +#endif diff --git a/bsp/simulator/pcap/Include/pcap/bpf.h b/bsp/simulator/pcap/Include/pcap/bpf.h new file mode 100644 index 0000000000..9f4ca33e35 --- /dev/null +++ b/bsp/simulator/pcap/Include/pcap/bpf.h @@ -0,0 +1,934 @@ +/*- + * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 + * The Regents of the University of California. All rights reserved. + * + * This code is derived from the Stanford/CMU enet packet filter, + * (net/enet.c) distributed as part of 4.3BSD, and code contributed + * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence + * Berkeley Laboratory. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#)bpf.h 7.1 (Berkeley) 5/7/91 + * + * @(#) $Header: /tcpdump/master/libpcap/pcap/bpf.h,v 1.19.2.8 2008-09-22 20:16:01 guy Exp $ (LBL) + */ + +/* + * This is libpcap's cut-down version of bpf.h; it includes only + * the stuff needed for the code generator and the userland BPF + * interpreter, and the libpcap APIs for setting filters, etc.. + * + * "pcap-bpf.c" will include the native OS version, as it deals with + * the OS's BPF implementation. + * + * XXX - should this all just be moved to "pcap.h"? + */ + +#ifndef BPF_MAJOR_VERSION + +#ifdef __cplusplus +extern "C" { +#endif + +/* BSD style release date */ +#define BPF_RELEASE 199606 + +#ifdef MSDOS /* must be 32-bit */ +typedef long bpf_int32; +typedef unsigned long bpf_u_int32; +#else +typedef int bpf_int32; +typedef u_int bpf_u_int32; +#endif + +/* + * Alignment macros. BPF_WORDALIGN rounds up to the next + * even multiple of BPF_ALIGNMENT. + */ +#ifndef __NetBSD__ +#define BPF_ALIGNMENT sizeof(bpf_int32) +#else +#define BPF_ALIGNMENT sizeof(long) +#endif +#define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1)) + +#define BPF_MAXBUFSIZE 0x8000 +#define BPF_MINBUFSIZE 32 + +/* + * Structure for "pcap_compile()", "pcap_setfilter()", etc.. + */ +struct bpf_program { + u_int bf_len; + struct bpf_insn *bf_insns; +}; + +/* + * Struct return by BIOCVERSION. This represents the version number of + * the filter language described by the instruction encodings below. + * bpf understands a program iff kernel_major == filter_major && + * kernel_minor >= filter_minor, that is, if the value returned by the + * running kernel has the same major number and a minor number equal + * equal to or less than the filter being downloaded. Otherwise, the + * results are undefined, meaning an error may be returned or packets + * may be accepted haphazardly. + * It has nothing to do with the source code version. + */ +struct bpf_version { + u_short bv_major; + u_short bv_minor; +}; +/* Current version number of filter architecture. */ +#define BPF_MAJOR_VERSION 1 +#define BPF_MINOR_VERSION 1 + +/* + * Data-link level type codes. + * + * Do *NOT* add new values to this list without asking + * "tcpdump-workers@lists.tcpdump.org" for a value. Otherwise, you run + * the risk of using a value that's already being used for some other + * purpose, and of having tools that read libpcap-format captures not + * being able to handle captures with your new DLT_ value, with no hope + * that they will ever be changed to do so (as that would destroy their + * ability to read captures using that value for that other purpose). + */ + +/* + * These are the types that are the same on all platforms, and that + * have been defined by for ages. + */ +#define DLT_NULL 0 /* BSD loopback encapsulation */ +#define DLT_EN10MB 1 /* Ethernet (10Mb) */ +#define DLT_EN3MB 2 /* Experimental Ethernet (3Mb) */ +#define DLT_AX25 3 /* Amateur Radio AX.25 */ +#define DLT_PRONET 4 /* Proteon ProNET Token Ring */ +#define DLT_CHAOS 5 /* Chaos */ +#define DLT_IEEE802 6 /* 802.5 Token Ring */ +#define DLT_ARCNET 7 /* ARCNET, with BSD-style header */ +#define DLT_SLIP 8 /* Serial Line IP */ +#define DLT_PPP 9 /* Point-to-point Protocol */ +#define DLT_FDDI 10 /* FDDI */ + +/* + * These are types that are different on some platforms, and that + * have been defined by for ages. We use #ifdefs to + * detect the BSDs that define them differently from the traditional + * libpcap + * + * XXX - DLT_ATM_RFC1483 is 13 in BSD/OS, and DLT_RAW is 14 in BSD/OS, + * but I don't know what the right #define is for BSD/OS. + */ +#define DLT_ATM_RFC1483 11 /* LLC-encapsulated ATM */ + +#ifdef __OpenBSD__ +#define DLT_RAW 14 /* raw IP */ +#else +#define DLT_RAW 12 /* raw IP */ +#endif + +/* + * Given that the only OS that currently generates BSD/OS SLIP or PPP + * is, well, BSD/OS, arguably everybody should have chosen its values + * for DLT_SLIP_BSDOS and DLT_PPP_BSDOS, which are 15 and 16, but they + * didn't. So it goes. + */ +#if defined(__NetBSD__) || defined(__FreeBSD__) +#ifndef DLT_SLIP_BSDOS +#define DLT_SLIP_BSDOS 13 /* BSD/OS Serial Line IP */ +#define DLT_PPP_BSDOS 14 /* BSD/OS Point-to-point Protocol */ +#endif +#else +#define DLT_SLIP_BSDOS 15 /* BSD/OS Serial Line IP */ +#define DLT_PPP_BSDOS 16 /* BSD/OS Point-to-point Protocol */ +#endif + +/* + * 17 is used for DLT_OLD_PFLOG in OpenBSD; + * OBSOLETE: DLT_PFLOG is 117 in OpenBSD now as well. See below. + * 18 is used for DLT_PFSYNC in OpenBSD; don't use it for anything else. + */ + +#define DLT_ATM_CLIP 19 /* Linux Classical-IP over ATM */ + +/* + * Apparently Redback uses this for its SmartEdge 400/800. I hope + * nobody else decided to use it, too. + */ +#define DLT_REDBACK_SMARTEDGE 32 + +/* + * These values are defined by NetBSD; other platforms should refrain from + * using them for other purposes, so that NetBSD savefiles with link + * types of 50 or 51 can be read as this type on all platforms. + */ +#define DLT_PPP_SERIAL 50 /* PPP over serial with HDLC encapsulation */ +#define DLT_PPP_ETHER 51 /* PPP over Ethernet */ + +/* + * The Axent Raptor firewall - now the Symantec Enterprise Firewall - uses + * a link-layer type of 99 for the tcpdump it supplies. The link-layer + * header has 6 bytes of unknown data, something that appears to be an + * Ethernet type, and 36 bytes that appear to be 0 in at least one capture + * I've seen. + */ +#define DLT_SYMANTEC_FIREWALL 99 + +/* + * Values between 100 and 103 are used in capture file headers as + * link-layer types corresponding to DLT_ types that differ + * between platforms; don't use those values for new DLT_ new types. + */ + +/* + * This value was defined by libpcap 0.5; platforms that have defined + * it with a different value should define it here with that value - + * a link type of 104 in a save file will be mapped to DLT_C_HDLC, + * whatever value that happens to be, so programs will correctly + * handle files with that link type regardless of the value of + * DLT_C_HDLC. + * + * The name DLT_C_HDLC was used by BSD/OS; we use that name for source + * compatibility with programs written for BSD/OS. + * + * libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well, + * for source compatibility with programs written for libpcap 0.5. + */ +#define DLT_C_HDLC 104 /* Cisco HDLC */ +#define DLT_CHDLC DLT_C_HDLC + +#define DLT_IEEE802_11 105 /* IEEE 802.11 wireless */ + +/* + * 106 is reserved for Linux Classical IP over ATM; it's like DLT_RAW, + * except when it isn't. (I.e., sometimes it's just raw IP, and + * sometimes it isn't.) We currently handle it as DLT_LINUX_SLL, + * so that we don't have to worry about the link-layer header.) + */ + +/* + * Frame Relay; BSD/OS has a DLT_FR with a value of 11, but that collides + * with other values. + * DLT_FR and DLT_FRELAY packets start with the Q.922 Frame Relay header + * (DLCI, etc.). + */ +#define DLT_FRELAY 107 + +/* + * OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except + * that the AF_ type in the link-layer header is in network byte order. + * + * DLT_LOOP is 12 in OpenBSD, but that's DLT_RAW in other OSes, so + * we don't use 12 for it in OSes other than OpenBSD. + */ +#ifdef __OpenBSD__ +#define DLT_LOOP 12 +#else +#define DLT_LOOP 108 +#endif + +/* + * Encapsulated packets for IPsec; DLT_ENC is 13 in OpenBSD, but that's + * DLT_SLIP_BSDOS in NetBSD, so we don't use 13 for it in OSes other + * than OpenBSD. + */ +#ifdef __OpenBSD__ +#define DLT_ENC 13 +#else +#define DLT_ENC 109 +#endif + +/* + * Values between 110 and 112 are reserved for use in capture file headers + * as link-layer types corresponding to DLT_ types that might differ + * between platforms; don't use those values for new DLT_ types + * other than the corresponding DLT_ types. + */ + +/* + * This is for Linux cooked sockets. + */ +#define DLT_LINUX_SLL 113 + +/* + * Apple LocalTalk hardware. + */ +#define DLT_LTALK 114 + +/* + * Acorn Econet. + */ +#define DLT_ECONET 115 + +/* + * Reserved for use with OpenBSD ipfilter. + */ +#define DLT_IPFILTER 116 + +/* + * OpenBSD DLT_PFLOG; DLT_PFLOG is 17 in OpenBSD, but that's DLT_LANE8023 + * in SuSE 6.3, so we can't use 17 for it in capture-file headers. + * + * XXX: is there a conflict with DLT_PFSYNC 18 as well? + */ +#ifdef __OpenBSD__ +#define DLT_OLD_PFLOG 17 +#define DLT_PFSYNC 18 +#endif +#define DLT_PFLOG 117 + +/* + * Registered for Cisco-internal use. + */ +#define DLT_CISCO_IOS 118 + +/* + * For 802.11 cards using the Prism II chips, with a link-layer + * header including Prism monitor mode information plus an 802.11 + * header. + */ +#define DLT_PRISM_HEADER 119 + +/* + * Reserved for Aironet 802.11 cards, with an Aironet link-layer header + * (see Doug Ambrisko's FreeBSD patches). + */ +#define DLT_AIRONET_HEADER 120 + +/* + * Reserved for Siemens HiPath HDLC. + */ +#define DLT_HHDLC 121 + +/* + * This is for RFC 2625 IP-over-Fibre Channel. + * + * This is not for use with raw Fibre Channel, where the link-layer + * header starts with a Fibre Channel frame header; it's for IP-over-FC, + * where the link-layer header starts with an RFC 2625 Network_Header + * field. + */ +#define DLT_IP_OVER_FC 122 + +/* + * This is for Full Frontal ATM on Solaris with SunATM, with a + * pseudo-header followed by an AALn PDU. + * + * There may be other forms of Full Frontal ATM on other OSes, + * with different pseudo-headers. + * + * If ATM software returns a pseudo-header with VPI/VCI information + * (and, ideally, packet type information, e.g. signalling, ILMI, + * LANE, LLC-multiplexed traffic, etc.), it should not use + * DLT_ATM_RFC1483, but should get a new DLT_ value, so tcpdump + * and the like don't have to infer the presence or absence of a + * pseudo-header and the form of the pseudo-header. + */ +#define DLT_SUNATM 123 /* Solaris+SunATM */ + +/* + * Reserved as per request from Kent Dahlgren + * for private use. + */ +#define DLT_RIO 124 /* RapidIO */ +#define DLT_PCI_EXP 125 /* PCI Express */ +#define DLT_AURORA 126 /* Xilinx Aurora link layer */ + +/* + * Header for 802.11 plus a number of bits of link-layer information + * including radio information, used by some recent BSD drivers as + * well as the madwifi Atheros driver for Linux. + */ +#define DLT_IEEE802_11_RADIO 127 /* 802.11 plus radiotap radio header */ + +/* + * Reserved for the TZSP encapsulation, as per request from + * Chris Waters + * TZSP is a generic encapsulation for any other link type, + * which includes a means to include meta-information + * with the packet, e.g. signal strength and channel + * for 802.11 packets. + */ +#define DLT_TZSP 128 /* Tazmen Sniffer Protocol */ + +/* + * BSD's ARCNET headers have the source host, destination host, + * and type at the beginning of the packet; that's what's handed + * up to userland via BPF. + * + * Linux's ARCNET headers, however, have a 2-byte offset field + * between the host IDs and the type; that's what's handed up + * to userland via PF_PACKET sockets. + * + * We therefore have to have separate DLT_ values for them. + */ +#define DLT_ARCNET_LINUX 129 /* ARCNET */ + +/* + * Juniper-private data link types, as per request from + * Hannes Gredler . The DLT_s are used + * for passing on chassis-internal metainformation such as + * QOS profiles, etc.. + */ +#define DLT_JUNIPER_MLPPP 130 +#define DLT_JUNIPER_MLFR 131 +#define DLT_JUNIPER_ES 132 +#define DLT_JUNIPER_GGSN 133 +#define DLT_JUNIPER_MFR 134 +#define DLT_JUNIPER_ATM2 135 +#define DLT_JUNIPER_SERVICES 136 +#define DLT_JUNIPER_ATM1 137 + +/* + * Apple IP-over-IEEE 1394, as per a request from Dieter Siegmund + * . The header that's presented is an Ethernet-like + * header: + * + * #define FIREWIRE_EUI64_LEN 8 + * struct firewire_header { + * u_char firewire_dhost[FIREWIRE_EUI64_LEN]; + * u_char firewire_shost[FIREWIRE_EUI64_LEN]; + * u_short firewire_type; + * }; + * + * with "firewire_type" being an Ethernet type value, rather than, + * for example, raw GASP frames being handed up. + */ +#define DLT_APPLE_IP_OVER_IEEE1394 138 + +/* + * Various SS7 encapsulations, as per a request from Jeff Morriss + * and subsequent discussions. + */ +#define DLT_MTP2_WITH_PHDR 139 /* pseudo-header with various info, followed by MTP2 */ +#define DLT_MTP2 140 /* MTP2, without pseudo-header */ +#define DLT_MTP3 141 /* MTP3, without pseudo-header or MTP2 */ +#define DLT_SCCP 142 /* SCCP, without pseudo-header or MTP2 or MTP3 */ + +/* + * DOCSIS MAC frames. + */ +#define DLT_DOCSIS 143 + +/* + * Linux-IrDA packets. Protocol defined at http://www.irda.org. + * Those packets include IrLAP headers and above (IrLMP...), but + * don't include Phy framing (SOF/EOF/CRC & byte stuffing), because Phy + * framing can be handled by the hardware and depend on the bitrate. + * This is exactly the format you would get capturing on a Linux-IrDA + * interface (irdaX), but not on a raw serial port. + * Note the capture is done in "Linux-cooked" mode, so each packet include + * a fake packet header (struct sll_header). This is because IrDA packet + * decoding is dependant on the direction of the packet (incomming or + * outgoing). + * When/if other platform implement IrDA capture, we may revisit the + * issue and define a real DLT_IRDA... + * Jean II + */ +#define DLT_LINUX_IRDA 144 + +/* + * Reserved for IBM SP switch and IBM Next Federation switch. + */ +#define DLT_IBM_SP 145 +#define DLT_IBM_SN 146 + +/* + * Reserved for private use. If you have some link-layer header type + * that you want to use within your organization, with the capture files + * using that link-layer header type not ever be sent outside your + * organization, you can use these values. + * + * No libpcap release will use these for any purpose, nor will any + * tcpdump release use them, either. + * + * Do *NOT* use these in capture files that you expect anybody not using + * your private versions of capture-file-reading tools to read; in + * particular, do *NOT* use them in products, otherwise you may find that + * people won't be able to use tcpdump, or snort, or Ethereal, or... to + * read capture files from your firewall/intrusion detection/traffic + * monitoring/etc. appliance, or whatever product uses that DLT_ value, + * and you may also find that the developers of those applications will + * not accept patches to let them read those files. + * + * Also, do not use them if somebody might send you a capture using them + * for *their* private type and tools using them for *your* private type + * would have to read them. + * + * Instead, ask "tcpdump-workers@lists.tcpdump.org" for a new DLT_ value, + * as per the comment above, and use the type you're given. + */ +#define DLT_USER0 147 +#define DLT_USER1 148 +#define DLT_USER2 149 +#define DLT_USER3 150 +#define DLT_USER4 151 +#define DLT_USER5 152 +#define DLT_USER6 153 +#define DLT_USER7 154 +#define DLT_USER8 155 +#define DLT_USER9 156 +#define DLT_USER10 157 +#define DLT_USER11 158 +#define DLT_USER12 159 +#define DLT_USER13 160 +#define DLT_USER14 161 +#define DLT_USER15 162 + +/* + * For future use with 802.11 captures - defined by AbsoluteValue + * Systems to store a number of bits of link-layer information + * including radio information: + * + * http://www.shaftnet.org/~pizza/software/capturefrm.txt + * + * but it might be used by some non-AVS drivers now or in the + * future. + */ +#define DLT_IEEE802_11_RADIO_AVS 163 /* 802.11 plus AVS radio header */ + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler . The DLT_s are used + * for passing on chassis-internal metainformation such as + * QOS profiles, etc.. + */ +#define DLT_JUNIPER_MONITOR 164 + +/* + * Reserved for BACnet MS/TP. + */ +#define DLT_BACNET_MS_TP 165 + +/* + * Another PPP variant as per request from Karsten Keil . + * + * This is used in some OSes to allow a kernel socket filter to distinguish + * between incoming and outgoing packets, on a socket intended to + * supply pppd with outgoing packets so it can do dial-on-demand and + * hangup-on-lack-of-demand; incoming packets are filtered out so they + * don't cause pppd to hold the connection up (you don't want random + * input packets such as port scans, packets from old lost connections, + * etc. to force the connection to stay up). + * + * The first byte of the PPP header (0xff03) is modified to accomodate + * the direction - 0x00 = IN, 0x01 = OUT. + */ +#define DLT_PPP_PPPD 166 + +/* + * Names for backwards compatibility with older versions of some PPP + * software; new software should use DLT_PPP_PPPD. + */ +#define DLT_PPP_WITH_DIRECTION DLT_PPP_PPPD +#define DLT_LINUX_PPP_WITHDIRECTION DLT_PPP_PPPD + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler . The DLT_s are used + * for passing on chassis-internal metainformation such as + * QOS profiles, cookies, etc.. + */ +#define DLT_JUNIPER_PPPOE 167 +#define DLT_JUNIPER_PPPOE_ATM 168 + +#define DLT_GPRS_LLC 169 /* GPRS LLC */ +#define DLT_GPF_T 170 /* GPF-T (ITU-T G.7041/Y.1303) */ +#define DLT_GPF_F 171 /* GPF-F (ITU-T G.7041/Y.1303) */ + +/* + * Requested by Oolan Zimmer for use in Gcom's T1/E1 line + * monitoring equipment. + */ +#define DLT_GCOM_T1E1 172 +#define DLT_GCOM_SERIAL 173 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler . The DLT_ is used + * for internal communication to Physical Interface Cards (PIC) + */ +#define DLT_JUNIPER_PIC_PEER 174 + +/* + * Link types requested by Gregor Maier of Endace + * Measurement Systems. They add an ERF header (see + * http://www.endace.com/support/EndaceRecordFormat.pdf) in front of + * the link-layer header. + */ +#define DLT_ERF_ETH 175 /* Ethernet */ +#define DLT_ERF_POS 176 /* Packet-over-SONET */ + +/* + * Requested by Daniele Orlandi for raw LAPD + * for vISDN (http://www.orlandi.com/visdn/). Its link-layer header + * includes additional information before the LAPD header, so it's + * not necessarily a generic LAPD header. + */ +#define DLT_LINUX_LAPD 177 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler . + * The DLT_ are used for prepending meta-information + * like interface index, interface name + * before standard Ethernet, PPP, Frelay & C-HDLC Frames + */ +#define DLT_JUNIPER_ETHER 178 +#define DLT_JUNIPER_PPP 179 +#define DLT_JUNIPER_FRELAY 180 +#define DLT_JUNIPER_CHDLC 181 + +/* + * Multi Link Frame Relay (FRF.16) + */ +#define DLT_MFR 182 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler . + * The DLT_ is used for internal communication with a + * voice Adapter Card (PIC) + */ +#define DLT_JUNIPER_VP 183 + +/* + * Arinc 429 frames. + * DLT_ requested by Gianluca Varenni . + * Every frame contains a 32bit A429 label. + * More documentation on Arinc 429 can be found at + * http://www.condoreng.com/support/downloads/tutorials/ARINCTutorial.pdf + */ +#define DLT_A429 184 + +/* + * Arinc 653 Interpartition Communication messages. + * DLT_ requested by Gianluca Varenni . + * Please refer to the A653-1 standard for more information. + */ +#define DLT_A653_ICM 185 + +/* + * USB packets, beginning with a USB setup header; requested by + * Paolo Abeni . + */ +#define DLT_USB 186 + +/* + * Bluetooth HCI UART transport layer (part H:4); requested by + * Paolo Abeni. + */ +#define DLT_BLUETOOTH_HCI_H4 187 + +/* + * IEEE 802.16 MAC Common Part Sublayer; requested by Maria Cruz + * . + */ +#define DLT_IEEE802_16_MAC_CPS 188 + +/* + * USB packets, beginning with a Linux USB header; requested by + * Paolo Abeni . + */ +#define DLT_USB_LINUX 189 + +/* + * Controller Area Network (CAN) v. 2.0B packets. + * DLT_ requested by Gianluca Varenni . + * Used to dump CAN packets coming from a CAN Vector board. + * More documentation on the CAN v2.0B frames can be found at + * http://www.can-cia.org/downloads/?269 + */ +#define DLT_CAN20B 190 + +/* + * IEEE 802.15.4, with address fields padded, as is done by Linux + * drivers; requested by Juergen Schimmer. + */ +#define DLT_IEEE802_15_4_LINUX 191 + +/* + * Per Packet Information encapsulated packets. + * DLT_ requested by Gianluca Varenni . + */ +#define DLT_PPI 192 + +/* + * Header for 802.16 MAC Common Part Sublayer plus a radiotap radio header; + * requested by Charles Clancy. + */ +#define DLT_IEEE802_16_MAC_CPS_RADIO 193 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler . + * The DLT_ is used for internal communication with a + * integrated service module (ISM). + */ +#define DLT_JUNIPER_ISM 194 + +/* + * IEEE 802.15.4, exactly as it appears in the spec (no padding, no + * nothing); requested by Mikko Saarnivala . + */ +#define DLT_IEEE802_15_4 195 + +/* + * Various link-layer types, with a pseudo-header, for SITA + * (http://www.sita.aero/); requested by Fulko Hew (fulko.hew@gmail.com). + */ +#define DLT_SITA 196 + +/* + * Various link-layer types, with a pseudo-header, for Endace DAG cards; + * encapsulates Endace ERF records. Requested by Stephen Donnelly + * . + */ +#define DLT_ERF 197 + +/* + * Special header prepended to Ethernet packets when capturing from a + * u10 Networks board. Requested by Phil Mulholland + * . + */ +#define DLT_RAIF1 198 + +/* + * IPMB packet for IPMI, beginning with the I2C slave address, followed + * by the netFn and LUN, etc.. Requested by Chanthy Toeung + * . + */ +#define DLT_IPMB 199 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler . + * The DLT_ is used for capturing data on a secure tunnel interface. + */ +#define DLT_JUNIPER_ST 200 + +/* + * Bluetooth HCI UART transport layer (part H:4), with pseudo-header + * that includes direction information; requested by Paolo Abeni. + */ +#define DLT_BLUETOOTH_HCI_H4_WITH_PHDR 201 + +/* + * AX.25 packet with a 1-byte KISS header; see + * + * http://www.ax25.net/kiss.htm + * + * as per Richard Stearn . + */ +#define DLT_AX25_KISS 202 + +/* + * LAPD packets from an ISDN channel, starting with the address field, + * with no pseudo-header. + * Requested by Varuna De Silva . + */ +#define DLT_LAPD 203 + +/* + * Variants of various link-layer headers, with a one-byte direction + * pseudo-header prepended - zero means "received by this host", + * non-zero (any non-zero value) means "sent by this host" - as per + * Will Barker . + */ +#define DLT_PPP_WITH_DIR 204 /* PPP - don't confuse with DLT_PPP_WITH_DIRECTION */ +#define DLT_C_HDLC_WITH_DIR 205 /* Cisco HDLC */ +#define DLT_FRELAY_WITH_DIR 206 /* Frame Relay */ +#define DLT_LAPB_WITH_DIR 207 /* LAPB */ + +/* + * 208 is reserved for an as-yet-unspecified proprietary link-layer + * type, as requested by Will Barker. + */ + +/* + * IPMB with a Linux-specific pseudo-header; as requested by Alexey Neyman + * . + */ +#define DLT_IPMB_LINUX 209 + +/* + * FlexRay automotive bus - http://www.flexray.com/ - as requested + * by Hannes Kaelber . + */ +#define DLT_FLEXRAY 210 + +/* + * Media Oriented Systems Transport (MOST) bus for multimedia + * transport - http://www.mostcooperation.com/ - as requested + * by Hannes Kaelber . + */ +#define DLT_MOST 211 + +/* + * Local Interconnect Network (LIN) bus for vehicle networks - + * http://www.lin-subbus.org/ - as requested by Hannes Kaelber + * . + */ +#define DLT_LIN 212 + +/* + * X2E-private data link type used for serial line capture, + * as requested by Hannes Kaelber . + */ +#define DLT_X2E_SERIAL 213 + +/* + * X2E-private data link type used for the Xoraya data logger + * family, as requested by Hannes Kaelber . + */ +#define DLT_X2E_XORAYA 214 + +/* + * IEEE 802.15.4, exactly as it appears in the spec (no padding, no + * nothing), but with the PHY-level data for non-ASK PHYs (4 octets + * of 0 as preamble, one octet of SFD, one octet of frame length+ + * reserved bit, and then the MAC-layer data, starting with the + * frame control field). + * + * Requested by Max Filippov . + */ +#define DLT_IEEE802_15_4_NONASK_PHY 215 + + +/* + * DLT and savefile link type values are split into a class and + * a member of that class. A class value of 0 indicates a regular + * DLT_/LINKTYPE_ value. + */ +#define DLT_CLASS(x) ((x) & 0x03ff0000) + +/* + * NetBSD-specific generic "raw" link type. The class value indicates + * that this is the generic raw type, and the lower 16 bits are the + * address family we're dealing with. Those values are NetBSD-specific; + * do not assume that they correspond to AF_ values for your operating + * system. + */ +#define DLT_CLASS_NETBSD_RAWAF 0x02240000 +#define DLT_NETBSD_RAWAF(af) (DLT_CLASS_NETBSD_RAWAF | (af)) +#define DLT_NETBSD_RAWAF_AF(x) ((x) & 0x0000ffff) +#define DLT_IS_NETBSD_RAWAF(x) (DLT_CLASS(x) == DLT_CLASS_NETBSD_RAWAF) + + +/* + * The instruction encodings. + */ +/* instruction classes */ +#define BPF_CLASS(code) ((code) & 0x07) +#define BPF_LD 0x00 +#define BPF_LDX 0x01 +#define BPF_ST 0x02 +#define BPF_STX 0x03 +#define BPF_ALU 0x04 +#define BPF_JMP 0x05 +#define BPF_RET 0x06 +#define BPF_MISC 0x07 + +/* ld/ldx fields */ +#define BPF_SIZE(code) ((code) & 0x18) +#define BPF_W 0x00 +#define BPF_H 0x08 +#define BPF_B 0x10 +#define BPF_MODE(code) ((code) & 0xe0) +#define BPF_IMM 0x00 +#define BPF_ABS 0x20 +#define BPF_IND 0x40 +#define BPF_MEM 0x60 +#define BPF_LEN 0x80 +#define BPF_MSH 0xa0 + +/* alu/jmp fields */ +#define BPF_OP(code) ((code) & 0xf0) +#define BPF_ADD 0x00 +#define BPF_SUB 0x10 +#define BPF_MUL 0x20 +#define BPF_DIV 0x30 +#define BPF_OR 0x40 +#define BPF_AND 0x50 +#define BPF_LSH 0x60 +#define BPF_RSH 0x70 +#define BPF_NEG 0x80 +#define BPF_JA 0x00 +#define BPF_JEQ 0x10 +#define BPF_JGT 0x20 +#define BPF_JGE 0x30 +#define BPF_JSET 0x40 +#define BPF_SRC(code) ((code) & 0x08) +#define BPF_K 0x00 +#define BPF_X 0x08 + +/* ret - BPF_K and BPF_X also apply */ +#define BPF_RVAL(code) ((code) & 0x18) +#define BPF_A 0x10 + +/* misc */ +#define BPF_MISCOP(code) ((code) & 0xf8) +#define BPF_TAX 0x00 +#define BPF_TXA 0x80 + +/* + * The instruction data structure. + */ +struct bpf_insn { + u_short code; + u_char jt; + u_char jf; + bpf_u_int32 k; +}; + +/* + * Macros for insn array initializers. + */ +#define BPF_STMT(code, k) { (u_short)(code), 0, 0, k } +#define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k } + +#if __STDC__ || defined(__cplusplus) +extern int bpf_validate(const struct bpf_insn *, int); +extern u_int bpf_filter(const struct bpf_insn *, const u_char *, u_int, u_int); +#else +extern int bpf_validate(); +extern u_int bpf_filter(); +#endif + +/* + * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST). + */ +#define BPF_MEMWORDS 16 + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/bsp/simulator/pcap/Include/pcap/namedb.h b/bsp/simulator/pcap/Include/pcap/namedb.h new file mode 100644 index 0000000000..9002c75093 --- /dev/null +++ b/bsp/simulator/pcap/Include/pcap/namedb.h @@ -0,0 +1,89 @@ +/* + * Copyright (c) 1994, 1996 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the Computer Systems + * Engineering Group at Lawrence Berkeley Laboratory. + * 4. Neither the name of the University nor of the Laboratory may be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#) $Header: /tcpdump/master/libpcap/pcap/namedb.h,v 1.1 2006/10/04 18:09:22 guy Exp $ (LBL) + */ + +#ifndef lib_pcap_namedb_h +#define lib_pcap_namedb_h + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * As returned by the pcap_next_etherent() + * XXX this stuff doesn't belong in this interface, but this + * library already must do name to address translation, so + * on systems that don't have support for /etc/ethers, we + * export these hooks since they'll + */ +struct pcap_etherent { + u_char addr[6]; + char name[122]; +}; +#ifndef PCAP_ETHERS_FILE +#define PCAP_ETHERS_FILE "/etc/ethers" +#endif +struct pcap_etherent *pcap_next_etherent(FILE *); +u_char *pcap_ether_hostton(const char*); +u_char *pcap_ether_aton(const char *); + +bpf_u_int32 **pcap_nametoaddr(const char *); +#ifdef INET6 +struct addrinfo *pcap_nametoaddrinfo(const char *); +#endif +bpf_u_int32 pcap_nametonetaddr(const char *); + +int pcap_nametoport(const char *, int *, int *); +int pcap_nametoportrange(const char *, int *, int *, int *); +int pcap_nametoproto(const char *); +int pcap_nametoeproto(const char *); +int pcap_nametollc(const char *); +/* + * If a protocol is unknown, PROTO_UNDEF is returned. + * Also, pcap_nametoport() returns the protocol along with the port number. + * If there are ambiguous entried in /etc/services (i.e. domain + * can be either tcp or udp) PROTO_UNDEF is returned. + */ +#define PROTO_UNDEF -1 + +/* XXX move these to pcap-int.h? */ +int __pcap_atodn(const char *, bpf_u_int32 *); +int __pcap_atoin(const char *, bpf_u_int32 *); +u_short __pcap_nametodnaddr(const char *); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/bsp/simulator/pcap/Include/pcap/pcap.h b/bsp/simulator/pcap/Include/pcap/pcap.h new file mode 100644 index 0000000000..ad8fc40ac1 --- /dev/null +++ b/bsp/simulator/pcap/Include/pcap/pcap.h @@ -0,0 +1,407 @@ +/* -*- Mode: c; tab-width: 8; indent-tabs-mode: 1; c-basic-offset: 8; -*- */ +/* + * Copyright (c) 1993, 1994, 1995, 1996, 1997 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the Computer Systems + * Engineering Group at Lawrence Berkeley Laboratory. + * 4. Neither the name of the University nor of the Laboratory may be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#) $Header: /tcpdump/master/libpcap/pcap/pcap.h,v 1.4.2.11 2008-10-06 15:38:39 gianluca Exp $ (LBL) + */ + +#ifndef lib_pcap_pcap_h +#define lib_pcap_pcap_h + +#if defined(WIN32) + #include +#elif defined(MSDOS) + #include + #include /* u_int, u_char etc. */ +#else /* UN*X */ + #include + #include +#endif /* WIN32/MSDOS/UN*X */ + +#ifndef PCAP_DONT_INCLUDE_PCAP_BPF_H +#include +#endif + +#include + +#ifdef HAVE_REMOTE + // We have to define the SOCKET here, although it has been defined in sockutils.h + // This is to avoid the distribution of the 'sockutils.h' file around + // (for example in the WinPcap developer's pack) + #ifndef SOCKET + #ifdef WIN32 + #define SOCKET unsigned int + #else + #define SOCKET int + #endif + #endif +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +#define PCAP_VERSION_MAJOR 2 +#define PCAP_VERSION_MINOR 4 + +#define PCAP_ERRBUF_SIZE 256 + +/* + * Compatibility for systems that have a bpf.h that + * predates the bpf typedefs for 64-bit support. + */ +#if BPF_RELEASE - 0 < 199406 +typedef int bpf_int32; +typedef u_int bpf_u_int32; +#endif + +typedef struct pcap pcap_t; +typedef struct pcap_dumper pcap_dumper_t; +typedef struct pcap_if pcap_if_t; +typedef struct pcap_addr pcap_addr_t; + +/* + * The first record in the file contains saved values for some + * of the flags used in the printout phases of tcpdump. + * Many fields here are 32 bit ints so compilers won't insert unwanted + * padding; these files need to be interchangeable across architectures. + * + * Do not change the layout of this structure, in any way (this includes + * changes that only affect the length of fields in this structure). + * + * Also, do not change the interpretation of any of the members of this + * structure, in any way (this includes using values other than + * LINKTYPE_ values, as defined in "savefile.c", in the "linktype" + * field). + * + * Instead: + * + * introduce a new structure for the new format, if the layout + * of the structure changed; + * + * send mail to "tcpdump-workers@lists.tcpdump.org", requesting + * a new magic number for your new capture file format, and, when + * you get the new magic number, put it in "savefile.c"; + * + * use that magic number for save files with the changed file + * header; + * + * make the code in "savefile.c" capable of reading files with + * the old file header as well as files with the new file header + * (using the magic number to determine the header format). + * + * Then supply the changes as a patch at + * + * http://sourceforge.net/projects/libpcap/ + * + * so that future versions of libpcap and programs that use it (such as + * tcpdump) will be able to read your new capture file format. + */ +struct pcap_file_header { + bpf_u_int32 magic; + u_short version_major; + u_short version_minor; + bpf_int32 thiszone; /* gmt to local correction */ + bpf_u_int32 sigfigs; /* accuracy of timestamps */ + bpf_u_int32 snaplen; /* max length saved portion of each pkt */ + bpf_u_int32 linktype; /* data link type (LINKTYPE_*) */ +}; + +/* + * Macros for the value returned by pcap_datalink_ext(). + * + * If LT_FCS_LENGTH_PRESENT(x) is true, the LT_FCS_LENGTH(x) macro + * gives the FCS length of packets in the capture. + */ +#define LT_FCS_LENGTH_PRESENT(x) ((x) & 0x04000000) +#define LT_FCS_LENGTH(x) (((x) & 0xF0000000) >> 28) +#define LT_FCS_DATALINK_EXT(x) ((((x) & 0xF) << 28) | 0x04000000) + +typedef enum { + PCAP_D_INOUT = 0, + PCAP_D_IN, + PCAP_D_OUT +} pcap_direction_t; + +/* + * Generic per-packet information, as supplied by libpcap. + * + * The time stamp can and should be a "struct timeval", regardless of + * whether your system supports 32-bit tv_sec in "struct timeval", + * 64-bit tv_sec in "struct timeval", or both if it supports both 32-bit + * and 64-bit applications. The on-disk format of savefiles uses 32-bit + * tv_sec (and tv_usec); this structure is irrelevant to that. 32-bit + * and 64-bit versions of libpcap, even if they're on the same platform, + * should supply the appropriate version of "struct timeval", even if + * that's not what the underlying packet capture mechanism supplies. + */ +struct pcap_pkthdr { + struct timeval ts; /* time stamp */ + bpf_u_int32 caplen; /* length of portion present */ + bpf_u_int32 len; /* length this packet (off wire) */ +}; + +/* + * As returned by the pcap_stats() + */ +struct pcap_stat { + u_int ps_recv; /* number of packets received */ + u_int ps_drop; /* number of packets dropped */ + u_int ps_ifdrop; /* drops by interface XXX not yet supported */ +#ifdef HAVE_REMOTE + u_int ps_capt; /* number of packets that are received by the application; please get rid off the Win32 ifdef */ + u_int ps_sent; /* number of packets sent by the server on the network */ + u_int ps_netdrop; /* number of packets lost on the network */ +#endif /* HAVE_REMOTE */ +}; + +#ifdef MSDOS +/* + * As returned by the pcap_stats_ex() + */ +struct pcap_stat_ex { + u_long rx_packets; /* total packets received */ + u_long tx_packets; /* total packets transmitted */ + u_long rx_bytes; /* total bytes received */ + u_long tx_bytes; /* total bytes transmitted */ + u_long rx_errors; /* bad packets received */ + u_long tx_errors; /* packet transmit problems */ + u_long rx_dropped; /* no space in Rx buffers */ + u_long tx_dropped; /* no space available for Tx */ + u_long multicast; /* multicast packets received */ + u_long collisions; + + /* detailed rx_errors: */ + u_long rx_length_errors; + u_long rx_over_errors; /* receiver ring buff overflow */ + u_long rx_crc_errors; /* recv'd pkt with crc error */ + u_long rx_frame_errors; /* recv'd frame alignment error */ + u_long rx_fifo_errors; /* recv'r fifo overrun */ + u_long rx_missed_errors; /* recv'r missed packet */ + + /* detailed tx_errors */ + u_long tx_aborted_errors; + u_long tx_carrier_errors; + u_long tx_fifo_errors; + u_long tx_heartbeat_errors; + u_long tx_window_errors; + }; +#endif + +/* + * Item in a list of interfaces. + */ +struct pcap_if { + struct pcap_if *next; + char *name; /* name to hand to "pcap_open_live()" */ + char *description; /* textual description of interface, or NULL */ + struct pcap_addr *addresses; + bpf_u_int32 flags; /* PCAP_IF_ interface flags */ +}; + +#define PCAP_IF_LOOPBACK 0x00000001 /* interface is loopback */ + +/* + * Representation of an interface address. + */ +struct pcap_addr { + struct pcap_addr *next; + struct sockaddr *addr; /* address */ + struct sockaddr *netmask; /* netmask for that address */ + struct sockaddr *broadaddr; /* broadcast address for that address */ + struct sockaddr *dstaddr; /* P2P destination address for that address */ +}; + +typedef void (*pcap_handler)(u_char *, const struct pcap_pkthdr *, + const u_char *); + +/* + * Error codes for the pcap API. + * These will all be negative, so you can check for the success or + * failure of a call that returns these codes by checking for a + * negative value. + */ +#define PCAP_ERROR -1 /* generic error code */ +#define PCAP_ERROR_BREAK -2 /* loop terminated by pcap_breakloop */ +#define PCAP_ERROR_NOT_ACTIVATED -3 /* the capture needs to be activated */ +#define PCAP_ERROR_ACTIVATED -4 /* the operation can't be performed on already activated captures */ +#define PCAP_ERROR_NO_SUCH_DEVICE -5 /* no such device exists */ +#define PCAP_ERROR_RFMON_NOTSUP -6 /* this device doesn't support rfmon (monitor) mode */ +#define PCAP_ERROR_NOT_RFMON -7 /* operation supported only in monitor mode */ +#define PCAP_ERROR_PERM_DENIED -8 /* no permission to open the device */ +#define PCAP_ERROR_IFACE_NOT_UP -9 /* interface isn't up */ + +/* + * Warning codes for the pcap API. + * These will all be positive and non-zero, so they won't look like + * errors. + */ +#define PCAP_WARNING 1 /* generic warning code */ +#define PCAP_WARNING_PROMISC_NOTSUP 2 /* this device doesn't support promiscuous mode */ + +char *pcap_lookupdev(char *); +int pcap_lookupnet(const char *, bpf_u_int32 *, bpf_u_int32 *, char *); + +pcap_t *pcap_create(const char *, char *); +int pcap_set_snaplen(pcap_t *, int); +int pcap_set_promisc(pcap_t *, int); +int pcap_can_set_rfmon(pcap_t *); +int pcap_set_rfmon(pcap_t *, int); +int pcap_set_timeout(pcap_t *, int); +int pcap_set_buffer_size(pcap_t *, int); +int pcap_activate(pcap_t *); + +pcap_t *pcap_open_live(const char *, int, int, int, char *); +pcap_t *pcap_open_dead(int, int); +pcap_t *pcap_open_offline(const char *, char *); +#if defined(WIN32) +pcap_t *pcap_hopen_offline(intptr_t, char *); +#if !defined(LIBPCAP_EXPORTS) +#define pcap_fopen_offline(f,b) \ + pcap_hopen_offline(_get_osfhandle(_fileno(f)), b) +#else /*LIBPCAP_EXPORTS*/ +static pcap_t *pcap_fopen_offline(FILE *, char *); +#endif +#else /*WIN32*/ +pcap_t *pcap_fopen_offline(FILE *, char *); +#endif /*WIN32*/ + +void pcap_close(pcap_t *); +int pcap_loop(pcap_t *, int, pcap_handler, u_char *); +int pcap_dispatch(pcap_t *, int, pcap_handler, u_char *); +const u_char* + pcap_next(pcap_t *, struct pcap_pkthdr *); +int pcap_next_ex(pcap_t *, struct pcap_pkthdr **, const u_char **); +void pcap_breakloop(pcap_t *); +int pcap_stats(pcap_t *, struct pcap_stat *); +int pcap_setfilter(pcap_t *, struct bpf_program *); +int pcap_setdirection(pcap_t *, pcap_direction_t); +int pcap_getnonblock(pcap_t *, char *); +int pcap_setnonblock(pcap_t *, int, char *); +int pcap_inject(pcap_t *, const void *, size_t); +int pcap_sendpacket(pcap_t *, const u_char *, int); +const char *pcap_statustostr(int); +const char *pcap_strerror(int); +char *pcap_geterr(pcap_t *); +void pcap_perror(pcap_t *, char *); +int pcap_compile(pcap_t *, struct bpf_program *, const char *, int, + bpf_u_int32); +int pcap_compile_nopcap(int, int, struct bpf_program *, + const char *, int, bpf_u_int32); +void pcap_freecode(struct bpf_program *); +int pcap_offline_filter(struct bpf_program *, const struct pcap_pkthdr *, + const u_char *); +int pcap_datalink(pcap_t *); +int pcap_datalink_ext(pcap_t *); +int pcap_list_datalinks(pcap_t *, int **); +int pcap_set_datalink(pcap_t *, int); +void pcap_free_datalinks(int *); +int pcap_datalink_name_to_val(const char *); +const char *pcap_datalink_val_to_name(int); +const char *pcap_datalink_val_to_description(int); +int pcap_snapshot(pcap_t *); +int pcap_is_swapped(pcap_t *); +int pcap_major_version(pcap_t *); +int pcap_minor_version(pcap_t *); + +/* XXX */ +FILE *pcap_file(pcap_t *); +int pcap_fileno(pcap_t *); + +pcap_dumper_t *pcap_dump_open(pcap_t *, const char *); +pcap_dumper_t *pcap_dump_fopen(pcap_t *, FILE *fp); +FILE *pcap_dump_file(pcap_dumper_t *); +long pcap_dump_ftell(pcap_dumper_t *); +int pcap_dump_flush(pcap_dumper_t *); +void pcap_dump_close(pcap_dumper_t *); +void pcap_dump(u_char *, const struct pcap_pkthdr *, const u_char *); + +int pcap_findalldevs(pcap_if_t **, char *); +void pcap_freealldevs(pcap_if_t *); + +const char *pcap_lib_version(void); + +/* XXX this guy lives in the bpf tree */ +u_int bpf_filter(const struct bpf_insn *, const u_char *, u_int, u_int); +int bpf_validate(const struct bpf_insn *f, int len); +char *bpf_image(const struct bpf_insn *, int); +void bpf_dump(const struct bpf_program *, int); + +#if defined(WIN32) + +/* + * Win32 definitions + */ + +int pcap_setbuff(pcap_t *p, int dim); +int pcap_setmode(pcap_t *p, int mode); +int pcap_setmintocopy(pcap_t *p, int size); + +#ifdef WPCAP +/* Include file with the wpcap-specific extensions */ +#include +#endif /* WPCAP */ + +#define MODE_CAPT 0 +#define MODE_STAT 1 +#define MODE_MON 2 + +#elif defined(MSDOS) + +/* + * MS-DOS definitions + */ + +int pcap_stats_ex (pcap_t *, struct pcap_stat_ex *); +void pcap_set_wait (pcap_t *p, void (*yield)(void), int wait); +u_long pcap_mac_packets (void); + +#else /* UN*X */ + +/* + * UN*X definitions + */ + +int pcap_get_selectable_fd(pcap_t *); + +#endif /* WIN32/MSDOS/UN*X */ + +#ifdef HAVE_REMOTE +/* Includes most of the public stuff that is needed for the remote capture */ +#include +#endif /* HAVE_REMOTE */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/bsp/simulator/pcap/Include/pcap/sll.h b/bsp/simulator/pcap/Include/pcap/sll.h new file mode 100644 index 0000000000..e9d5452af7 --- /dev/null +++ b/bsp/simulator/pcap/Include/pcap/sll.h @@ -0,0 +1,129 @@ +/*- + * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 + * The Regents of the University of California. All rights reserved. + * + * This code is derived from the Stanford/CMU enet packet filter, + * (net/enet.c) distributed as part of 4.3BSD, and code contributed + * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence + * Berkeley Laboratory. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#) $Header: /tcpdump/master/libpcap/pcap/sll.h,v 1.2.2.1 2008-05-30 01:36:06 guy Exp $ (LBL) + */ + +/* + * For captures on Linux cooked sockets, we construct a fake header + * that includes: + * + * a 2-byte "packet type" which is one of: + * + * LINUX_SLL_HOST packet was sent to us + * LINUX_SLL_BROADCAST packet was broadcast + * LINUX_SLL_MULTICAST packet was multicast + * LINUX_SLL_OTHERHOST packet was sent to somebody else + * LINUX_SLL_OUTGOING packet was sent *by* us; + * + * a 2-byte Ethernet protocol field; + * + * a 2-byte link-layer type; + * + * a 2-byte link-layer address length; + * + * an 8-byte source link-layer address, whose actual length is + * specified by the previous value. + * + * All fields except for the link-layer address are in network byte order. + * + * DO NOT change the layout of this structure, or change any of the + * LINUX_SLL_ values below. If you must change the link-layer header + * for a "cooked" Linux capture, introduce a new DLT_ type (ask + * "tcpdump-workers@lists.tcpdump.org" for one, so that you don't give it + * a value that collides with a value already being used), and use the + * new header in captures of that type, so that programs that can + * handle DLT_LINUX_SLL captures will continue to handle them correctly + * without any change, and so that capture files with different headers + * can be told apart and programs that read them can dissect the + * packets in them. + */ + +#ifndef lib_pcap_sll_h +#define lib_pcap_sll_h + +/* + * A DLT_LINUX_SLL fake link-layer header. + */ +#define SLL_HDR_LEN 16 /* total header length */ +#define SLL_ADDRLEN 8 /* length of address field */ + +struct sll_header { + u_int16_t sll_pkttype; /* packet type */ + u_int16_t sll_hatype; /* link-layer address type */ + u_int16_t sll_halen; /* link-layer address length */ + u_int8_t sll_addr[SLL_ADDRLEN]; /* link-layer address */ + u_int16_t sll_protocol; /* protocol */ +}; + +/* + * The LINUX_SLL_ values for "sll_pkttype"; these correspond to the + * PACKET_ values on Linux, but are defined here so that they're + * available even on systems other than Linux, and so that they + * don't change even if the PACKET_ values change. + */ +#define LINUX_SLL_HOST 0 +#define LINUX_SLL_BROADCAST 1 +#define LINUX_SLL_MULTICAST 2 +#define LINUX_SLL_OTHERHOST 3 +#define LINUX_SLL_OUTGOING 4 + +/* + * The LINUX_SLL_ values for "sll_protocol"; these correspond to the + * ETH_P_ values on Linux, but are defined here so that they're + * available even on systems other than Linux. We assume, for now, + * that the ETH_P_ values won't change in Linux; if they do, then: + * + * if we don't translate them in "pcap-linux.c", capture files + * won't necessarily be readable if captured on a system that + * defines ETH_P_ values that don't match these values; + * + * if we do translate them in "pcap-linux.c", that makes life + * unpleasant for the BPF code generator, as the values you test + * for in the kernel aren't the values that you test for when + * reading a capture file, so the fixup code run on BPF programs + * handed to the kernel ends up having to do more work. + * + * Add other values here as necessary, for handling packet types that + * might show up on non-Ethernet, non-802.x networks. (Not all the ones + * in the Linux "if_ether.h" will, I suspect, actually show up in + * captures.) + */ +#define LINUX_SLL_P_802_3 0x0001 /* Novell 802.3 frames without 802.2 LLC header */ +#define LINUX_SLL_P_802_2 0x0004 /* 802.2 frames (not D/I/X Ethernet) */ + +#endif diff --git a/bsp/simulator/pcap/Include/pcap/usb.h b/bsp/simulator/pcap/Include/pcap/usb.h new file mode 100644 index 0000000000..adcd19c058 --- /dev/null +++ b/bsp/simulator/pcap/Include/pcap/usb.h @@ -0,0 +1,90 @@ +/* + * Copyright (c) 2006 Paolo Abeni (Italy) + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Basic USB data struct + * By Paolo Abeni + * + * @(#) $Header: /tcpdump/master/libpcap/pcap/usb.h,v 1.6 2007/09/22 02:06:08 guy Exp $ + */ + +#ifndef _PCAP_USB_STRUCTS_H__ +#define _PCAP_USB_STRUCTS_H__ + +/* + * possible transfer mode + */ +#define URB_TRANSFER_IN 0x80 +#define URB_ISOCHRONOUS 0x0 +#define URB_INTERRUPT 0x1 +#define URB_CONTROL 0x2 +#define URB_BULK 0x3 + +/* + * possible event type + */ +#define URB_SUBMIT 'S' +#define URB_COMPLETE 'C' +#define URB_ERROR 'E' + +/* + * USB setup header as defined in USB specification. + * Appears at the front of each packet in DLT_USB captures. + */ +typedef struct _usb_setup { + u_int8_t bmRequestType; + u_int8_t bRequest; + u_int16_t wValue; + u_int16_t wIndex; + u_int16_t wLength; +} pcap_usb_setup; + + +/* + * Header prepended by linux kernel to each event. + * Appears at the front of each packet in DLT_USB_LINUX captures. + */ +typedef struct _usb_header { + u_int64_t id; + u_int8_t event_type; + u_int8_t transfer_type; + u_int8_t endpoint_number; + u_int8_t device_address; + u_int16_t bus_id; + char setup_flag;/*if !=0 the urb setup header is not present*/ + char data_flag; /*if !=0 no urb data is present*/ + int64_t ts_sec; + int32_t ts_usec; + int32_t status; + u_int32_t urb_len; + u_int32_t data_len; /* amount of urb data really present in this event*/ + pcap_usb_setup setup; +} pcap_usb_header; + + +#endif diff --git a/bsp/simulator/pcap/Include/pcap/vlan.h b/bsp/simulator/pcap/Include/pcap/vlan.h new file mode 100644 index 0000000000..b0cb7949be --- /dev/null +++ b/bsp/simulator/pcap/Include/pcap/vlan.h @@ -0,0 +1,46 @@ +/*- + * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#) $Header: /tcpdump/master/libpcap/pcap/vlan.h,v 1.1.2.2 2008-08-06 07:45:59 guy Exp $ + */ + +#ifndef lib_pcap_vlan_h +#define lib_pcap_vlan_h + +struct vlan_tag { + u_int16_t vlan_tpid; /* ETH_P_8021Q */ + u_int16_t vlan_tci; /* VLAN TCI */ +}; + +#define VLAN_TAG_LEN 4 + +#endif diff --git a/bsp/simulator/pcap/Include/remote-ext.h b/bsp/simulator/pcap/Include/remote-ext.h new file mode 100644 index 0000000000..9f54d6974c --- /dev/null +++ b/bsp/simulator/pcap/Include/remote-ext.h @@ -0,0 +1,444 @@ +/* + * Copyright (c) 2002 - 2003 + * NetGroup, Politecnico di Torino (Italy) + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Politecnico di Torino nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + + +#ifndef __REMOTE_EXT_H__ +#define __REMOTE_EXT_H__ + + +#ifndef HAVE_REMOTE +#error Please do not include this file directly. Just define HAVE_REMOTE and then include pcap.h +#endif + +// Definition for Microsoft Visual Studio +#if _MSC_VER > 1000 +#pragma once +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +/*! + \file remote-ext.h + + The goal of this file it to include most of the new definitions that should be + placed into the pcap.h file. + + It includes all new definitions (structures and functions like pcap_open(). + Some of the functions are not really a remote feature, but, right now, + they are placed here. +*/ + + + +// All this stuff is public +/*! \addtogroup remote_struct + \{ +*/ + + + + +/*! + \brief Defines the maximum buffer size in which address, port, interface names are kept. + + In case the adapter name or such is larger than this value, it is truncated. + This is not used by the user; however it must be aware that an hostname / interface + name longer than this value will be truncated. +*/ +#define PCAP_BUF_SIZE 1024 + + +/*! \addtogroup remote_source_ID + \{ +*/ + + +/*! + \brief Internal representation of the type of source in use (file, + remote/local interface). + + This indicates a file, i.e. the user want to open a capture from a local file. +*/ +#define PCAP_SRC_FILE 2 +/*! + \brief Internal representation of the type of source in use (file, + remote/local interface). + + This indicates a local interface, i.e. the user want to open a capture from + a local interface. This does not involve the RPCAP protocol. +*/ +#define PCAP_SRC_IFLOCAL 3 +/*! + \brief Internal representation of the type of source in use (file, + remote/local interface). + + This indicates a remote interface, i.e. the user want to open a capture from + an interface on a remote host. This does involve the RPCAP protocol. +*/ +#define PCAP_SRC_IFREMOTE 4 + +/*! + \} +*/ + + + +/*! \addtogroup remote_source_string + + The formats allowed by the pcap_open() are the following: + - file://path_and_filename [opens a local file] + - rpcap://devicename [opens the selected device devices available on the local host, without using the RPCAP protocol] + - rpcap://host/devicename [opens the selected device available on a remote host] + - rpcap://host:port/devicename [opens the selected device available on a remote host, using a non-standard port for RPCAP] + - adaptername [to open a local adapter; kept for compability, but it is strongly discouraged] + - (NULL) [to open the first local adapter; kept for compability, but it is strongly discouraged] + + The formats allowed by the pcap_findalldevs_ex() are the following: + - file://folder/ [lists all the files in the given folder] + - rpcap:// [lists all local adapters] + - rpcap://host:port/ [lists the devices available on a remote host] + + Referring to the 'host' and 'port' paramters, they can be either numeric or literal. Since + IPv6 is fully supported, these are the allowed formats: + + - host (literal): e.g. host.foo.bar + - host (numeric IPv4): e.g. 10.11.12.13 + - host (numeric IPv4, IPv6 style): e.g. [10.11.12.13] + - host (numeric IPv6): e.g. [1:2:3::4] + - port: can be either numeric (e.g. '80') or literal (e.g. 'http') + + Here you find some allowed examples: + - rpcap://host.foo.bar/devicename [everything literal, no port number] + - rpcap://host.foo.bar:1234/devicename [everything literal, with port number] + - rpcap://10.11.12.13/devicename [IPv4 numeric, no port number] + - rpcap://10.11.12.13:1234/devicename [IPv4 numeric, with port number] + - rpcap://[10.11.12.13]:1234/devicename [IPv4 numeric with IPv6 format, with port number] + - rpcap://[1:2:3::4]/devicename [IPv6 numeric, no port number] + - rpcap://[1:2:3::4]:1234/devicename [IPv6 numeric, with port number] + - rpcap://[1:2:3::4]:http/devicename [IPv6 numeric, with literal port number] + + \{ +*/ + + +/*! + \brief String that will be used to determine the type of source in use (file, + remote/local interface). + + This string will be prepended to the interface name in order to create a string + that contains all the information required to open the source. + + This string indicates that the user wants to open a capture from a local file. +*/ +#define PCAP_SRC_FILE_STRING "file://" +/*! + \brief String that will be used to determine the type of source in use (file, + remote/local interface). + + This string will be prepended to the interface name in order to create a string + that contains all the information required to open the source. + + This string indicates that the user wants to open a capture from a network interface. + This string does not necessarily involve the use of the RPCAP protocol. If the + interface required resides on the local host, the RPCAP protocol is not involved + and the local functions are used. +*/ +#define PCAP_SRC_IF_STRING "rpcap://" + +/*! + \} +*/ + + + + + +/*! + \addtogroup remote_open_flags + \{ +*/ + +/*! + \brief Defines if the adapter has to go in promiscuous mode. + + It is '1' if you have to open the adapter in promiscuous mode, '0' otherwise. + Note that even if this parameter is false, the interface could well be in promiscuous + mode for some other reason (for example because another capture process with + promiscuous mode enabled is currently using that interface). + On on Linux systems with 2.2 or later kernels (that have the "any" device), this + flag does not work on the "any" device; if an argument of "any" is supplied, + the 'promisc' flag is ignored. +*/ +#define PCAP_OPENFLAG_PROMISCUOUS 1 + +/*! + \brief Defines if the data trasfer (in case of a remote + capture) has to be done with UDP protocol. + + If it is '1' if you want a UDP data connection, '0' if you want + a TCP data connection; control connection is always TCP-based. + A UDP connection is much lighter, but it does not guarantee that all + the captured packets arrive to the client workstation. Moreover, + it could be harmful in case of network congestion. + This flag is meaningless if the source is not a remote interface. + In that case, it is simply ignored. +*/ +#define PCAP_OPENFLAG_DATATX_UDP 2 + + +/*! + \brief Defines if the remote probe will capture its own generated traffic. + + In case the remote probe uses the same interface to capture traffic and to send + data back to the caller, the captured traffic includes the RPCAP traffic as well. + If this flag is turned on, the RPCAP traffic is excluded from the capture, so that + the trace returned back to the collector is does not include this traffic. +*/ +#define PCAP_OPENFLAG_NOCAPTURE_RPCAP 4 + +/*! + \brief Defines if the local adapter will capture its own generated traffic. + + This flag tells the underlying capture driver to drop the packets that were sent by itself. + This is usefult when building applications like bridges, that should ignore the traffic + they just sent. +*/ +#define PCAP_OPENFLAG_NOCAPTURE_LOCAL 8 + +/*! + \brief This flag configures the adapter for maximum responsiveness. + + In presence of a large value for nbytes, WinPcap waits for the arrival of several packets before + copying the data to the user. This guarantees a low number of system calls, i.e. lower processor usage, + i.e. better performance, which is good for applications like sniffers. If the user sets the + PCAP_OPENFLAG_MAX_RESPONSIVENESS flag, the capture driver will copy the packets as soon as the application + is ready to receive them. This is suggested for real time applications (like, for example, a bridge) + that need the best responsiveness.*/ +#define PCAP_OPENFLAG_MAX_RESPONSIVENESS 16 + +/*! + \} +*/ + + +/*! + \addtogroup remote_samp_methods + \{ +*/ + +/*! + \brief No sampling has to be done on the current capture. + + In this case, no sampling algorithms are applied to the current capture. +*/ +#define PCAP_SAMP_NOSAMP 0 + +/*! + \brief It defines that only 1 out of N packets must be returned to the user. + + In this case, the 'value' field of the 'pcap_samp' structure indicates the + number of packets (minus 1) that must be discarded before one packet got accepted. + In other words, if 'value = 10', the first packet is returned to the caller, while + the following 9 are discarded. +*/ +#define PCAP_SAMP_1_EVERY_N 1 + +/*! + \brief It defines that we have to return 1 packet every N milliseconds. + + In this case, the 'value' field of the 'pcap_samp' structure indicates the 'waiting + time' in milliseconds before one packet got accepted. + In other words, if 'value = 10', the first packet is returned to the caller; the next + returned one will be the first packet that arrives when 10ms have elapsed. +*/ +#define PCAP_SAMP_FIRST_AFTER_N_MS 2 + +/*! + \} +*/ + + +/*! + \addtogroup remote_auth_methods + \{ +*/ + +/*! + \brief It defines the NULL authentication. + + This value has to be used within the 'type' member of the pcap_rmtauth structure. + The 'NULL' authentication has to be equal to 'zero', so that old applications + can just put every field of struct pcap_rmtauth to zero, and it does work. +*/ +#define RPCAP_RMTAUTH_NULL 0 +/*! + \brief It defines the username/password authentication. + + With this type of authentication, the RPCAP protocol will use the username/ + password provided to authenticate the user on the remote machine. If the + authentication is successful (and the user has the right to open network devices) + the RPCAP connection will continue; otherwise it will be dropped. + + This value has to be used within the 'type' member of the pcap_rmtauth structure. +*/ +#define RPCAP_RMTAUTH_PWD 1 + +/*! + \} +*/ + + + + +/*! + + \brief This structure keeps the information needed to autheticate + the user on a remote machine. + + The remote machine can either grant or refuse the access according + to the information provided. + In case the NULL authentication is required, both 'username' and + 'password' can be NULL pointers. + + This structure is meaningless if the source is not a remote interface; + in that case, the functions which requires such a structure can accept + a NULL pointer as well. +*/ +struct pcap_rmtauth +{ + /*! + \brief Type of the authentication required. + + In order to provide maximum flexibility, we can support different types + of authentication based on the value of this 'type' variable. The currently + supported authentication methods are defined into the + \link remote_auth_methods Remote Authentication Methods Section\endlink. + + */ + int type; + /*! + \brief Zero-terminated string containing the username that has to be + used on the remote machine for authentication. + + This field is meaningless in case of the RPCAP_RMTAUTH_NULL authentication + and it can be NULL. + */ + char *username; + /*! + \brief Zero-terminated string containing the password that has to be + used on the remote machine for authentication. + + This field is meaningless in case of the RPCAP_RMTAUTH_NULL authentication + and it can be NULL. + */ + char *password; +}; + + +/*! + \brief This structure defines the information related to sampling. + + In case the sampling is requested, the capturing device should read + only a subset of the packets coming from the source. The returned packets depend + on the sampling parameters. + + \warning The sampling process is applied after the filtering process. + In other words, packets are filtered first, then the sampling process selects a + subset of the 'filtered' packets and it returns them to the caller. +*/ +struct pcap_samp +{ + /*! + Method used for sampling. Currently, the supported methods are listed in the + \link remote_samp_methods Sampling Methods Section\endlink. + */ + int method; + + /*! + This value depends on the sampling method defined. For its meaning, please check + at the \link remote_samp_methods Sampling Methods Section\endlink. + */ + int value; +}; + + + + +//! Maximum lenght of an host name (needed for the RPCAP active mode) +#define RPCAP_HOSTLIST_SIZE 1024 + + +/*! + \} +*/ // end of public documentation + + +// Exported functions + + + +/** \name New WinPcap functions + + This section lists the new functions that are able to help considerably in writing + WinPcap programs because of their easiness of use. + */ +//\{ +pcap_t *pcap_open(const char *source, int snaplen, int flags, int read_timeout, struct pcap_rmtauth *auth, char *errbuf); +int pcap_createsrcstr(char *source, int type, const char *host, const char *port, const char *name, char *errbuf); +int pcap_parsesrcstr(const char *source, int *type, char *host, char *port, char *name, char *errbuf); +int pcap_findalldevs_ex(char *source, struct pcap_rmtauth *auth, pcap_if_t **alldevs, char *errbuf); +struct pcap_samp *pcap_setsampling(pcap_t *p); + +//\} +// End of new winpcap functions + + + +/** \name Remote Capture functions + */ +//\{ +SOCKET pcap_remoteact_accept(const char *address, const char *port, const char *hostlist, char *connectinghost, struct pcap_rmtauth *auth, char *errbuf); +int pcap_remoteact_list(char *hostlist, char sep, int size, char *errbuf); +int pcap_remoteact_close(const char *host, char *errbuf); +void pcap_remoteact_cleanup(); +//\} +// End of remote capture functions + +#ifdef __cplusplus +} +#endif + + +#endif + diff --git a/bsp/simulator/pcap/Lib/Packet.lib b/bsp/simulator/pcap/Lib/Packet.lib new file mode 100644 index 0000000000..81618bc8ca Binary files /dev/null and b/bsp/simulator/pcap/Lib/Packet.lib differ diff --git a/bsp/simulator/pcap/Lib/wpcap.lib b/bsp/simulator/pcap/Lib/wpcap.lib new file mode 100644 index 0000000000..f832e0445b Binary files /dev/null and b/bsp/simulator/pcap/Lib/wpcap.lib differ diff --git a/bsp/simulator/pcap/Lib/x64/Packet.lib b/bsp/simulator/pcap/Lib/x64/Packet.lib new file mode 100644 index 0000000000..30c1540503 Binary files /dev/null and b/bsp/simulator/pcap/Lib/x64/Packet.lib differ diff --git a/bsp/simulator/pcap/Lib/x64/wpcap.lib b/bsp/simulator/pcap/Lib/x64/wpcap.lib new file mode 100644 index 0000000000..d5559f802b Binary files /dev/null and b/bsp/simulator/pcap/Lib/x64/wpcap.lib differ diff --git a/bsp/simulator/pcap/SConscript b/bsp/simulator/pcap/SConscript new file mode 100644 index 0000000000..2e5ad4fdcc --- /dev/null +++ b/bsp/simulator/pcap/SConscript @@ -0,0 +1,13 @@ +from building import * + +cwd = GetCurrentDir() +src = Glob('*.c') + +CPPPATH = [cwd + '/Include'] +LIBPATH = [cwd + '/Lib'] +CPPDEFINES = ['WIN32'] +LIBS = ['wpcap'] + +group = DefineGroup('Pcap', src, depend = ['RT_USING_LWIP'], CPPPATH = CPPPATH, LIBPATH=LIBPATH, CPPDEFINES=CPPDEFINES, LIBS=LIBS) + +Return('group') diff --git a/bsp/simulator/pcap/pcap_netif.c b/bsp/simulator/pcap/pcap_netif.c new file mode 100644 index 0000000000..7ddfe4a1b5 --- /dev/null +++ b/bsp/simulator/pcap/pcap_netif.c @@ -0,0 +1,280 @@ +#ifdef _TIME_T_DEFINED +#undef _TIME_T_DEFINED +#endif + +#ifdef _MSC_VER +/* + * we do not want the warnings about the old deprecated and unsecure CRT functions + * since these examples can be compiled under *nix as well + */ +#define _CRT_SECURE_NO_WARNINGS +#endif +#include + +#include +#include + +#define MAX_ADDR_LEN 6 + +#define NETIF_DEVICE(netif) ((struct pcap_netif*)(netif)) +#define NETIF_PCAP(netif) (NETIF_DEVICE(netif)->tap) + +struct pcap_netif +{ + /* inherit from ethernet device */ + struct eth_device parent; + + pcap_t *tap; + /* interface address info. */ + rt_uint8_t dev_addr[MAX_ADDR_LEN]; /* hw address */ +}; +static struct pcap_netif pcap_netif_device; +static struct rt_semaphore sem_lock; +static rt_mailbox_t packet_mb = RT_NULL; + +static void pcap_thread_entry(void* parameter) +{ + pcap_if_t *netif; + pcap_t *tap; + char errbuf[PCAP_ERRBUF_SIZE]; + struct pcap_pkthdr *header; + const u_char *pkt_data; + int res; + + netif = (pcap_if_t *) parameter; + + /* Open the adapter */ + if ((tap = pcap_open_live(netif->name, + 65536, // portion of the packet to capture. + 1, // promiscuous mode (nonzero means promiscuous) + 1, // read timeout, 0 blocked, -1 no timeout + errbuf )) == NULL) + { + rt_kprintf("Unable to open the adapter. %s is not supported by WinPcap\n", netif->name); + return; + } + + NETIF_PCAP(&pcap_netif_device) = tap; + + // pcap_loop(tap, 0, packet_handler, NULL); + /* Read the packets */ + while((res = pcap_next_ex(tap, &header, &pkt_data)) >= 0) + { + struct eth_device* eth; + struct pbuf *p; + + if (res == 0) continue; + + eth = (struct eth_device*) &pcap_netif_device; + + p = pbuf_alloc(PBUF_LINK, header->len, PBUF_RAM); + pbuf_take(p, pkt_data, header->len); + + /* send to packet mailbox */ + rt_mb_send_wait(packet_mb, (rt_uint32_t)p, RT_WAITING_FOREVER); + /* notify eth rx thread to receive packet */ + eth_device_ready(eth); + } +} + +static rt_err_t pcap_netif_init(rt_device_t dev) +{ + rt_thread_t tid; + pcap_if_t *alldevs; + pcap_if_t *d; + pcap_t *tap; + int inum, i=0; + char errbuf[PCAP_ERRBUF_SIZE]; + + /* Retrieve the device list */ + if(pcap_findalldevs(&alldevs, errbuf) == -1) + { + rt_kprintf("Error in pcap_findalldevs: %s\n", errbuf); + return -RT_ERROR; + } + + /* Print the list */ + for(d = alldevs; d; d = d->next) + { + rt_kprintf("%d. %s", ++i, d->name); + if (d->description) + rt_kprintf(" (%s)\n", d->description); + else + rt_kprintf(" (No description available)\n"); + } + if(i == 0) + { + rt_kprintf("\nNo interfaces found! Make sure WinPcap is installed.\n"); + return -RT_ERROR; + } + + inum = 1; + /* Jump to the selected adapter */ + for(d = alldevs, i = 0; i < inum-1 ;d = d->next, i++); + + { + packet_mb = rt_mb_create("pcap", 64, RT_IPC_FLAG_FIFO); + tid = rt_thread_create("pcap", pcap_thread_entry, d, + 2048, RT_THREAD_PRIORITY_MAX - 1, 10); + if (tid != RT_NULL) + { + rt_thread_startup(tid); + } + + rt_thread_delay(100); + } + + pcap_freealldevs(alldevs); + + return RT_EOK; +} + +static rt_err_t pcap_netif_open(rt_device_t dev, rt_uint16_t oflag) +{ + return RT_EOK; +} + +static rt_err_t pcap_netif_close(rt_device_t dev) +{ + pcap_t *tap; + + tap = NETIF_PCAP(dev); + + pcap_close(tap); + return RT_EOK; +} + +static rt_size_t pcap_netif_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size) +{ + rt_set_errno(-RT_ENOSYS); + return 0; +} + +static rt_size_t pcap_netif_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size) +{ + rt_set_errno(-RT_ENOSYS); + return 0; +} + +static rt_err_t pcap_netif_control(rt_device_t dev, rt_uint8_t cmd, void *args) +{ + switch (cmd) + { + case NIOCTL_GADDR: + /* get mac address */ + if (args) rt_memcpy(args, pcap_netif_device.dev_addr, 6); + else return -RT_ERROR; + break; + + default : + break; + } + + return RT_EOK; +} + +rt_err_t pcap_netif_tx( rt_device_t dev, struct pbuf* p) +{ + struct pbuf *q; + rt_uint8_t *ptr; + rt_uint8_t buf[2048]; + rt_err_t result = RT_EOK; + pcap_t *tap; + + tap = NETIF_PCAP(dev); + + /* lock EMAC device */ + rt_sem_take(&sem_lock, RT_WAITING_FOREVER); + + /* copy data to tx buffer */ + q = p; + ptr = (rt_uint8_t*)buf; + while (q) + { + memcpy(ptr, q->payload, q->len); + ptr += q->len; + q = q->next; + } + + if (pcap_sendpacket(tap, buf, p->tot_len) != 0) + { + rt_kprintf("Error sending the packet: \n", pcap_geterr(tap)); + result = -RT_ERROR; + } + + /* unlock EMAC device */ + rt_sem_release(&sem_lock); + + return result; +} + +struct pbuf *pcap_netif_rx(rt_device_t dev) +{ + struct pbuf* p = RT_NULL; + + rt_mb_recv(packet_mb, (rt_uint32_t*)&p, 0); + + return p; +} + +void pcap_netif_hw_init(void) +{ + rt_sem_init(&sem_lock, "eth_lock", 1, RT_IPC_FLAG_FIFO); + + pcap_netif_device.dev_addr[0] = 0x00; + pcap_netif_device.dev_addr[1] = 0x60; + pcap_netif_device.dev_addr[2] = 0x37; + /* set mac address: (only for test) */ + pcap_netif_device.dev_addr[3] = 0x12; + pcap_netif_device.dev_addr[4] = 0x34; + pcap_netif_device.dev_addr[5] = 0x56; + + pcap_netif_device.parent.parent.init = pcap_netif_init; + pcap_netif_device.parent.parent.open = pcap_netif_open; + pcap_netif_device.parent.parent.close = pcap_netif_close; + pcap_netif_device.parent.parent.read = pcap_netif_read; + pcap_netif_device.parent.parent.write = pcap_netif_write; + pcap_netif_device.parent.parent.control = pcap_netif_control; + pcap_netif_device.parent.parent.user_data = RT_NULL; + + pcap_netif_device.parent.eth_rx = pcap_netif_rx; + pcap_netif_device.parent.eth_tx = pcap_netif_tx; + + eth_device_init(&(pcap_netif_device.parent), "e0"); +} + +#include +void list_pcap(void) +{ + int i=0; + pcap_if_t *alldevs; + pcap_if_t *d; + char errbuf[PCAP_ERRBUF_SIZE]; + + /* Retrieve the device list */ + if(pcap_findalldevs(&alldevs, errbuf) == -1) + { + rt_kprintf("Error in pcap_findalldevs: %s\n", errbuf); + return -RT_ERROR; + } + + /* Print the list */ + for(d = alldevs; d; d = d->next) + { + rt_kprintf("%d. %s", ++i, d->name); + if (d->description) + rt_kprintf(" (%s)\n", d->description); + else + rt_kprintf(" (No description available)\n"); + } + if(i == 0) + { + rt_kprintf("\nNo interfaces found! Make sure WinPcap is installed.\n"); + return -RT_ERROR; + } + + pcap_freealldevs(alldevs); + + return ; +} +FINSH_FUNCTION_EXPORT(list_pcap, show host netif adapter); diff --git a/bsp/simulator/rtconfig.h b/bsp/simulator/rtconfig.h index 24941a0ae8..d7901ae467 100644 --- a/bsp/simulator/rtconfig.h +++ b/bsp/simulator/rtconfig.h @@ -109,7 +109,7 @@ #define DFS_FD_MAX 4 /* SECTION: lwip, a lighwight TCP/IP protocol stack */ -/* #define RT_USING_LWIP */ +#define RT_USING_LWIP /* LwIP uses RT-Thread Memory Management */ #define RT_LWIP_USING_RT_MEM /* Enable ICMP protocol*/