[bsp] Add MB9BF618 porting.

bsp/mb9bf618s/CMSIS/DeviceSupport/fujitsu/mb9bf61x/startup/arm/startup_mb9bf61x.S

@@ -0,0 +1,333 @@
+;/************************************************************************/
+;/*               (C) Fujitsu Semiconductor Europe GmbH                  */
+;/*                                                                      */
+;/* The following software deliverable is intended for and must only be  */
+;/* used for reference and in an evaluation laboratory environment.      */
+;/* It is provided on an as-is basis without charge and is subject to    */
+;/* alterations.                                                         */
+;/* It is the user’s obligation to fully test the software in its        */
+;/* environment and to ensure proper functionality, qualification and    */
+;/* compliance with component specifications.                            */
+;/*                                                                      */
+;/* In the event the software deliverable includes the use of open       */
+;/* source components, the provisions of the governing open source       */
+;/* license agreement shall apply with respect to such software          */
+;/* deliverable.                                                         */
+;/* FSEU does not warrant that the deliverables do not infringe any      */
+;/* third party intellectual property right (IPR). In the event that     */
+;/* the deliverables infringe a third party IPR it is the sole           */
+;/* responsibility of the customer to obtain necessary licenses to       */
+;/* continue the usage of the deliverable.                               */
+;/*                                                                      */
+;/* To the maximum extent permitted by applicable law FSEU disclaims all */
+;/* warranties, whether express or implied, in particular, but not       */
+;/* limited to, warranties of merchantability and fitness for a          */
+;/* particular purpose for which the deliverable is not designated.      */
+;/*                                                                      */
+;/* To the maximum extent permitted by applicable law, FSEU's liability  */
+;/* is restricted to intention and gross negligence.                     */
+;/* FSEU is not liable for consequential damages.                        */
+;/*                                                                      */
+;/* (V1.4)                                                               */
+;/************************************************************************/
+;/*  Startup for ARM                                                     */
+;/*  Version     V1.02                                                   */
+;/*  Date        2011-07-25                                              */
+;/*  Target-mcu  MB9B61x                                                 */
+;/************************************************************************/
+
+; Stack Configuration
+;  Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; Heap Configuration
+;  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+
+Heap_Size       EQU     0x00000000
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     MemManage_Handler         ; MPU Fault Handler
+                DCD     BusFault_Handler          ; Bus Fault Handler
+                DCD     UsageFault_Handler        ; Usage Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     DebugMon_Handler          ; Debug Monitor Handler
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                DCD     CSV_Handler               ; 0: Clock Super Visor
+                DCD     SWDT_Handler              ; 1: Software Watchdog Timer
+                DCD     LVD_Handler               ; 2: Low Voltage Detector
+                DCD     MFT_WG_IRQHandler         ; 3: Wave Form Generator / DTIF
+                DCD     INT0_7_Handler            ; 4: External Interrupt Request ch.0 to ch.7
+                DCD     INT8_31_Handler           ; 5: External Interrupt Request ch.8 to ch.31
+                DCD     DT_Handler                ; 6: Dual Timer / Quad Decoder
+                DCD     MFS0RX_IRQHandler         ; 7: MultiFunction Serial ch.0
+                DCD     MFS0TX_IRQHandler         ; 8: MultiFunction Serial ch.0
+                DCD     MFS1RX_IRQHandler         ; 9: MultiFunction Serial ch.1
+                DCD     MFS1TX_IRQHandler         ; 10: MultiFunction Serial ch.1
+                DCD     MFS2RX_IRQHandler         ; 11: MultiFunction Serial ch.2
+                DCD     MFS2TX_IRQHandler         ; 12: MultiFunction Serial ch.2
+                DCD     MFS3RX_IRQHandler         ; 13: MultiFunction Serial ch.3
+                DCD     MFS3TX_IRQHandler         ; 14: MultiFunction Serial ch.3
+                DCD     MFS4RX_IRQHandler         ; 15: MultiFunction Serial ch.4
+                DCD     MFS4TX_IRQHandler         ; 16: MultiFunction Serial ch.4
+                DCD     MFS5RX_IRQHandler         ; 17: MultiFunction Serial ch.5
+                DCD     MFS5TX_IRQHandler         ; 18: MultiFunction Serial ch.5
+                DCD     MFS6RX_IRQHandler         ; 19: MultiFunction Serial ch.6
+                DCD     MFS6TX_IRQHandler         ; 20: MultiFunction Serial ch.6
+                DCD     MFS7RX_IRQHandler         ; 21: MultiFunction Serial ch.7
+                DCD     MFS7TX_IRQHandler         ; 22: MultiFunction Serial ch.7
+                DCD     PPG_Handler               ; 23: PPG
+                DCD     TIM_IRQHandler            ; 24: OSC / PLL / Watch Counter
+                DCD     ADC0_IRQHandler           ; 25: ADC0
+                DCD     ADC1_IRQHandler           ; 26: ADC1
+                DCD     ADC2_IRQHandler           ; 27: ADC2
+                DCD     MFT_FRT_IRQHandler        ; 28: Free-run Timer
+                DCD     MFT_IPC_IRQHandler        ; 29: Input Capture
+                DCD     MFT_OPC_IRQHandler        ; 30: Output Compare
+                DCD     BT0_7_IRQHandler          ; 31: Base Timer ch.0 to ch.7
+                DCD     ETHER_MAC0_IRQHandler     ; 32: Ethernet MAC ch.0
+                DCD     ETHER_MAC1_IRQHandler     ; 33: Ethernet MAC ch.1
+                DCD     USB0F_Handler             ; 34: USB0 Function
+                DCD     USB0_Handler              ; 35: USB0 Function / USB0 HOST
+                DCD     USB1F_Handler             ; 36: USB1 Function
+                DCD     USB1_Handler              ; 37: USB1 Function / USB1 HOST
+                DCD     DMAC0_Handler             ; 38: DMAC ch.0
+                DCD     DMAC1_Handler             ; 39: DMAC ch.1
+                DCD     DMAC2_Handler             ; 40: DMAC ch.2
+                DCD     DMAC3_Handler             ; 41: DMAC ch.3
+                DCD     DMAC4_Handler             ; 42: DMAC ch.4
+                DCD     DMAC5_Handler             ; 43: DMAC ch.5
+                DCD     DMAC6_Handler             ; 44: DMAC ch.6
+                DCD     DMAC7_Handler             ; 45: DMAC ch.7
+                DCD     BT8_15_IRQHandler         ; 46: Base Timer ch.8 to ch.15
+                DCD     DummyHandler              ; 47: Reserved
+__Vectors_End
+
+__Vectors_Size 	EQU 	__Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT  Reset_Handler             [WEAK]
+                IMPORT  SystemInit
+                IMPORT  __main
+                LDR     R0, =SystemInit
+                BLX     R0
+                LDR     R0, =__main
+                BX      R0
+                ENDP
+
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler               [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler         [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler         [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler          [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler        [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler               [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler          [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler            [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler           [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  CSV_Handler	          [WEAK]
+                EXPORT  SWDT_Handler              [WEAK]
+                EXPORT  LVD_Handler               [WEAK]
+                EXPORT  MFT_WG_IRQHandler         [WEAK]
+                EXPORT  INT0_7_Handler            [WEAK]
+                EXPORT  INT8_31_Handler           [WEAK]
+                EXPORT  DT_Handler                [WEAK]
+                EXPORT  MFS0RX_IRQHandler         [WEAK]
+                EXPORT  MFS0TX_IRQHandler         [WEAK]
+                EXPORT  MFS1RX_IRQHandler         [WEAK]
+                EXPORT  MFS1TX_IRQHandler         [WEAK]
+                EXPORT  MFS2RX_IRQHandler         [WEAK]
+                EXPORT  MFS2TX_IRQHandler         [WEAK]
+                EXPORT  MFS3RX_IRQHandler         [WEAK]
+                EXPORT  MFS3TX_IRQHandler         [WEAK]
+                EXPORT  MFS4RX_IRQHandler         [WEAK]
+                EXPORT  MFS4TX_IRQHandler         [WEAK]
+                EXPORT  MFS5RX_IRQHandler         [WEAK]
+                EXPORT  MFS5TX_IRQHandler         [WEAK]
+                EXPORT  MFS6RX_IRQHandler         [WEAK]
+                EXPORT  MFS6TX_IRQHandler         [WEAK]
+                EXPORT  MFS7RX_IRQHandler         [WEAK]
+                EXPORT  MFS7TX_IRQHandler         [WEAK]
+                EXPORT  PPG_Handler               [WEAK]
+                EXPORT  TIM_IRQHandler            [WEAK]
+                EXPORT  ADC0_IRQHandler           [WEAK]
+                EXPORT  ADC1_IRQHandler           [WEAK]
+                EXPORT  ADC2_IRQHandler           [WEAK]
+                EXPORT  MFT_FRT_IRQHandler        [WEAK]
+                EXPORT  MFT_IPC_IRQHandler        [WEAK]
+                EXPORT  MFT_OPC_IRQHandler        [WEAK]
+                EXPORT  BT0_7_IRQHandler          [WEAK]
+                EXPORT  ETHER_MAC0_IRQHandler     [WEAK]
+                EXPORT  ETHER_MAC1_IRQHandler     [WEAK]
+                EXPORT  USB0F_Handler             [WEAK]
+                EXPORT  USB0_Handler              [WEAK]
+                EXPORT  USB1F_Handler             [WEAK]
+                EXPORT  USB1_Handler              [WEAK]
+                EXPORT  DMAC0_Handler             [WEAK]
+                EXPORT  DMAC1_Handler             [WEAK]
+                EXPORT  DMAC2_Handler             [WEAK]
+                EXPORT  DMAC3_Handler             [WEAK]
+                EXPORT  DMAC4_Handler             [WEAK]
+                EXPORT  DMAC5_Handler             [WEAK]
+                EXPORT  DMAC6_Handler             [WEAK]
+                EXPORT  DMAC7_Handler             [WEAK]
+                EXPORT  BT8_15_IRQHandler         [WEAK]
+                EXPORT  DummyHandler              [WEAK]
+
+CSV_Handler
+SWDT_Handler
+LVD_Handler
+MFT_WG_IRQHandler
+INT0_7_Handler
+INT8_31_Handler
+DT_Handler
+MFS0RX_IRQHandler
+MFS0TX_IRQHandler
+MFS1RX_IRQHandler
+MFS1TX_IRQHandler
+MFS2RX_IRQHandler
+MFS2TX_IRQHandler
+MFS3RX_IRQHandler
+MFS3TX_IRQHandler
+MFS4RX_IRQHandler
+MFS4TX_IRQHandler
+MFS5RX_IRQHandler
+MFS5TX_IRQHandler
+MFS6RX_IRQHandler
+MFS6TX_IRQHandler
+MFS7RX_IRQHandler
+MFS7TX_IRQHandler
+PPG_Handler
+TIM_IRQHandler
+ADC0_IRQHandler
+ADC1_IRQHandler
+ADC2_IRQHandler
+MFT_FRT_IRQHandler
+MFT_IPC_IRQHandler
+MFT_OPC_IRQHandler
+BT0_7_IRQHandler
+DMAC0_Handler
+DMAC1_Handler
+DMAC2_Handler
+DMAC3_Handler
+DMAC4_Handler
+DMAC5_Handler
+DMAC6_Handler
+DMAC7_Handler
+ETHER_MAC0_IRQHandler
+ETHER_MAC1_IRQHandler
+USB0F_Handler
+USB0_Handler
+USB1F_Handler
+USB1_Handler
+BT8_15_IRQHandler
+DummyHandler
+
+                B       .
+
+                ENDP
+
+
+                ALIGN
+
+
+; User Initial Stack & Heap
+
+                IF      :DEF:__MICROLIB
+                
+                EXPORT  __initial_sp
+                EXPORT  __heap_base
+                EXPORT  __heap_limit
+                
+                ELSE
+                
+                IMPORT  __use_two_region_memory
+                EXPORT  __user_initial_stackheap
+__user_initial_stackheap
+
+                LDR     R0, =  Heap_Mem
+                LDR     R1, =(Stack_Mem + Stack_Size)
+                LDR     R2, = (Heap_Mem +  Heap_Size)
+                LDR     R3, = Stack_Mem
+                BX      LR
+
+                ALIGN
+
+                ENDIF
+
+
+                END

bsp/mb9bf618s/CMSIS/DeviceSupport/fujitsu/mb9bf61x/startup/gcc/startup_mb9bf61x.c

@@ -0,0 +1,244 @@
+/*
+ ****************************************************************************
+**
+**  File        : startup_mb9bf61x.c
+**
+**  Abstract    : This file contains interrupt vector and startup code.
+**
+**  Functions   : Reset_Handler
+**
+**  Target      : Fujitsu FM3 microcontrollers
+**
+**  Environment : Atollic TrueSTUDIO(R)
+**
+**  Distribution: The file is distributed “as is,” without any warranty
+**                of any kind.
+**
+**  (c)Copyright Atollic AB.
+**  You may use this file as-is or modify it according to the needs of your
+**  project. Distribution of this file (unmodified or modified) is not
+**  permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the
+**  rights to distribute the assembled, compiled & linked contents of this
+**  file as part of an application binary file, provided that it is built
+**  using the Atollic TrueSTUDIO(R) toolchain.
+**
+ ****************************************************************************
+*/
+
+/**
+**===========================================================================
+**  Revisions
+**===========================================================================
+**       Date        Modification
+**       2011-08-18  First issue.
+**===========================================================================
+*/
+
+/**
+**===========================================================================
+**  External declarations
+**===========================================================================
+*/
+extern unsigned long _sdata, _edata, _sidata, _sbss, _ebss, _isr_vector;
+extern unsigned long _estack;
+extern void __libc_init_array();
+extern void SystemInit();
+extern void main();
+
+/**
+**===========================================================================
+**  Default interrupt handler
+**===========================================================================
+*/
+void Default_Handler()
+{
+	/* Hang here */
+	while(1)
+	{
+	}
+}
+
+/**
+**===========================================================================
+**  Reset handler
+**===========================================================================
+*/
+__attribute__((naked)) void Reset_Handler()
+{
+	/* Data and BSS variables */
+	unsigned long *srcdata, *dstdata, *sbss;
+
+	/* Set up the stack pointer */
+	asm("ldr sp,=_estack\n\t");
+
+    /* Set up vector table offset register */
+	dstdata = (unsigned long *)0xe000ed08;
+	*dstdata = (unsigned long)&_isr_vector;
+
+	srcdata = &_sidata;
+	dstdata = &_sdata;
+	sbss = &_sbss;
+
+	/* Copy data */
+	while(dstdata != &_edata)
+	{
+		*(dstdata++) = *(srcdata++);
+	}
+
+	/* Clear BSS */
+	while(sbss != &_ebss)
+	{
+		*(sbss++) = '\0';
+	}
+
+	/* Run static constructors */
+	//__libc_init_array();
+
+	/* Call the clock system initialization function.*/
+	SystemInit();
+
+	/* Jump to main */
+	main();
+
+	/* In case main returns, use default handler */
+	Default_Handler();
+}
+
+/**
+**===========================================================================
+**  Weak definitions of handlers point to Default_Handler if not implemented
+**===========================================================================
+*/
+void NMI_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void HardFault_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void MemManage_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void BusFault_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void UsageFault_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void SVC_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void DebugMonitor_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void PendSV_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void SysTick_Handler() __attribute__ ((weak, alias("Default_Handler")));
+
+void CSV_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void SWDT_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void LVD_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void MFT_WG_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void INT0_7_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void INT8_31_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void DT_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void MFS0RX_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFS0TX_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFS1RX_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFS1TX_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFS2RX_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFS2TX_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFS3RX_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFS3TX_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFS4RX_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFS4TX_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFS5RX_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFS5TX_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFS6RX_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFS6TX_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFS7RX_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFS7TX_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void PPG_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void TIM_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void ADC0_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void ADC1_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void ADC2_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFT_FRT_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFT_IPC_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void MFT_OPC_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void BT0_7_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void ETHER_MAC0_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void ETHER_MAC1_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+void USB0F_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void USB0_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void USB1F_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void USB1_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void DMAC0_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void DMAC1_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void DMAC2_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void DMAC3_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void DMAC4_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void DMAC5_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void DMAC6_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void DMAC7_Handler() __attribute__ ((weak, alias("Default_Handler")));
+void BT8_15_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
+
+
+/**
+**===========================================================================
+**  Interrupt Vector Table
+**===========================================================================
+*/
+void (* const InterruptVector[])() __attribute__ ((section(".isr_vector"))) = {
+		/* Processor exceptions */
+		(void (*)(void))&_estack, /* 0 - Stack pointer */
+		Reset_Handler,            /* 1 - Reset */
+		NMI_Handler,              /* 2 - NMI  */
+		HardFault_Handler,        /* 3 - Hard fault */
+		MemManage_Handler,        /* 4 - Memory management fault */
+		BusFault_Handler,         /* 5 - Bus fault */
+		UsageFault_Handler,       /* 6 - Usage fault */
+		0,                        /* 7 - Reserved */
+		0,                        /* 8 - Reserved */
+		0,                        /* 9 - Reserved */
+		0,                        /* 10 - Reserved */
+		SVC_Handler,              /* 11 - SVCall */
+		DebugMonitor_Handler,     /* 12 - Reserved for Debug */
+		0,                        /* 13 - Reserved */
+		PendSV_Handler,           /* 14 - PendSV */
+		SysTick_Handler,          /* 15 - Systick */
+
+		/* External Interrupts */
+		CSV_Handler,              /* 0: Clock Super Visor */
+		SWDT_Handler,             /* 1: Software Watchdog Timer */
+		LVD_Handler,              /* 2: Low Voltage Detector */
+		MFT_WG_IRQHandler,        /* 3: Wave Form Generator / DTIF */
+		INT0_7_Handler,           /* 4: External Interrupt Request ch.0 to ch.7 */
+		INT8_31_Handler,          /* 5: External Interrupt Request ch.8 to ch.31 */
+		DT_Handler,               /* 6: Dual Timer / Quad Decoder */
+		MFS0RX_IRQHandler,        /* 7: MultiFunction Serial ch.0 */
+		MFS0TX_IRQHandler,        /* 8: MultiFunction Serial ch.0 */
+		MFS1RX_IRQHandler,        /* 9: MultiFunction Serial ch.1 */
+		MFS1TX_IRQHandler,        /* 10: MultiFunction Serial ch.1 */
+		MFS2RX_IRQHandler,        /* 11: MultiFunction Serial ch.2 */
+		MFS2TX_IRQHandler,        /* 12: MultiFunction Serial ch.2 */
+		MFS3RX_IRQHandler,        /* 13: MultiFunction Serial ch.3 */
+		MFS3TX_IRQHandler,        /* 14: MultiFunction Serial ch.3 */
+		MFS4RX_IRQHandler,        /* 15: MultiFunction Serial ch.4 */
+		MFS4TX_IRQHandler,        /* 16: MultiFunction Serial ch.4 */
+		MFS5RX_IRQHandler,        /* 17: MultiFunction Serial ch.5 */
+		MFS5TX_IRQHandler,        /* 18: MultiFunction Serial ch.5 */
+		MFS6RX_IRQHandler,        /* 19: MultiFunction Serial ch.6 */
+		MFS6TX_IRQHandler,        /* 20: MultiFunction Serial ch.6 */
+		MFS7RX_IRQHandler,        /* 21: MultiFunction Serial ch.7 */
+		MFS7TX_IRQHandler,        /* 22: MultiFunction Serial ch.7 */
+		PPG_Handler,              /* 23: PPG */
+		TIM_IRQHandler,           /* 24: OSC / PLL / Watch Counter */
+		ADC0_IRQHandler,          /* 25: ADC0 */
+		ADC1_IRQHandler,          /* 26: ADC1 */
+		ADC2_IRQHandler,          /* 27: ADC2 */
+		MFT_FRT_IRQHandler,       /* 28: Free-run Timer */
+		MFT_IPC_IRQHandler,       /* 29: Input Capture */
+		MFT_OPC_IRQHandler,       /* 30: Output Compare */
+		BT0_7_IRQHandler,         /* 31: Base Timer ch.0 to ch.7 */
+		ETHER_MAC0_IRQHandler,    /* 32: Ethernet MAC ch.0 */
+		ETHER_MAC1_IRQHandler,    /* 33: Ethernet MAC ch.1 */
+		USB0F_Handler,            /* 34: USB0 Function */
+		USB0_Handler,             /* 35: USB0 Function / USB0 HOST */
+		USB1F_Handler,            /* 36: USB1 Function */
+		USB1_Handler,             /* 37: USB1 Function / USB1 HOST */
+		DMAC0_Handler,            /* 38: DMAC ch.0 */
+		DMAC1_Handler,            /* 39: DMAC ch.1 */
+		DMAC2_Handler,            /* 40: DMAC ch.2 */
+		DMAC3_Handler,            /* 41: DMAC ch.3 */
+		DMAC4_Handler,            /* 42: DMAC ch.4 */
+		DMAC5_Handler,            /* 43: DMAC ch.5 */
+		DMAC6_Handler,            /* 44: DMAC ch.6 */
+		DMAC7_Handler,            /* 45: DMAC ch.7 */
+		BT8_15_IRQHandler,        /* 46: Base Timer ch.8 to ch.15 */
+		Default_Handler           /* 47: Reserved */
+};

bsp/mb9bf618s/CMSIS/DeviceSupport/fujitsu/mb9bf61x/startup/iar/startup_mb9bf61x.S

@@ -0,0 +1,417 @@
+;/************************************************************************/
+;/*               (C) Fujitsu Semiconductor Europe GmbH (FSEU)           */
+;/*                                                                      */
+;/* The following software deliverable is intended for and must only be  */
+;/* used for reference and in an evaluation laboratory environment.      */
+;/* It is provided on an as-is basis without charge and is subject to    */
+;/* alterations.                                                         */
+;/* It is the user's obligation to fully test the software in its        */
+;/* environment and to ensure proper functionality, qualification and    */
+;/* compliance with component specifications.                            */
+;/*                                                                      */
+;/* In the event the software deliverable includes the use of open       */
+;/* source components, the provisions of the governing open source       */
+;/* license agreement shall apply with respect to such software          */
+;/* deliverable.                                                         */
+;/* FSEU does not warrant that the deliverables do not infringe any      */
+;/* third party intellectual property right (IPR). In the event that     */
+;/* the deliverables infringe a third party IPR it is the sole           */
+;/* responsibility of the customer to obtain necessary licenses to       */
+;/* continue the usage of the deliverable.                               */
+;/*                                                                      */
+;/* To the maximum extent permitted by applicable law FSEU disclaims all */
+;/* warranties, whether express or implied, in particular, but not       */
+;/* limited to, warranties of merchantability and fitness for a          */
+;/* particular purpose for which the deliverable is not designated.      */
+;/*                                                                      */
+;/* To the maximum extent permitted by applicable law, FSEU's liability  */
+;/* is restricted to intentional misconduct and gross negligence.        */
+;/* FSEU is not liable for consequential damages.                        */
+;/*                                                                      */
+;/* (V1.5)                                                               */
+;/************************************************************************/
+;/*  Startup for IAR                                                     */
+;/*  Version     V1.00                                                   */
+;/*  Date        2011-07-25                                              */
+;/*  Target-mcu  MB9B610                                                 */
+;/************************************************************************/
+
+
+                MODULE  ?cstartup
+
+                ;; Forward declaration of sections.
+                SECTION CSTACK:DATA:NOROOT(3)
+
+                SECTION .intvec:CODE:NOROOT(2)
+
+                EXTERN  __iar_program_start
+                EXTERN  SystemInit
+                PUBLIC  __vector_table
+
+                DATA
+__vector_table  DCD     sfe(CSTACK)               ; Top of Stack
+		        DCD     Reset_Handler             ; Reset
+                DCD     NMI_Handler               ; NMI
+                DCD     HardFault_Handler         ; Hard Fault
+                DCD     MemManage_Handler         ; MPU Fault
+                DCD     BusFault_Handler          ; Bus Fault
+                DCD     UsageFault_Handler        ; Usage Fault
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall
+                DCD     DebugMon_Handler          ; Debug Monitor
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV
+                DCD     SysTick_Handler           ; SysTick
+
+                DCD     CSV_Handler               ; 0: Clock Super Visor
+                DCD     SWDT_Handler              ; 1: Software Watchdog Timer
+                DCD     LVD_Handler               ; 2: Low Voltage Detector
+                DCD     MFT_WG_IRQHandler         ; 3: Wave Form Generator / DTIF
+                DCD     INT0_7_Handler            ; 4: External Interrupt Request ch.0 to ch.7
+                DCD     INT8_31_Handler           ; 5: External Interrupt Request ch.8 to ch.31
+                DCD     DT_Handler                ; 6: Dual Timer / Quad Decoder
+                DCD     MFS0RX_IRQHandler         ; 7: MultiFunction Serial ch.0
+                DCD     MFS0TX_IRQHandler         ; 8: MultiFunction Serial ch.0
+                DCD     MFS1RX_IRQHandler         ; 9: MultiFunction Serial ch.1
+                DCD     MFS1TX_IRQHandler         ; 10: MultiFunction Serial ch.1
+                DCD     MFS2RX_IRQHandler         ; 11: MultiFunction Serial ch.2
+                DCD     MFS2TX_IRQHandler         ; 12: MultiFunction Serial ch.2
+                DCD     MFS3RX_IRQHandler         ; 13: MultiFunction Serial ch.3
+                DCD     MFS3TX_IRQHandler         ; 14: MultiFunction Serial ch.3
+                DCD     MFS4RX_IRQHandler         ; 15: MultiFunction Serial ch.4
+                DCD     MFS4TX_IRQHandler         ; 16: MultiFunction Serial ch.4
+                DCD     MFS5RX_IRQHandler         ; 17: MultiFunction Serial ch.5
+                DCD     MFS5TX_IRQHandler         ; 18: MultiFunction Serial ch.5
+                DCD     MFS6RX_IRQHandler         ; 19: MultiFunction Serial ch.6
+                DCD     MFS6TX_IRQHandler         ; 20: MultiFunction Serial ch.6
+                DCD     MFS7RX_IRQHandler         ; 21: MultiFunction Serial ch.7
+                DCD     MFS7TX_IRQHandler         ; 22: MultiFunction Serial ch.7
+                DCD     PPG_Handler               ; 23: PPG
+                DCD     TIM_IRQHandler            ; 24: OSC / PLL / Watch Counter
+                DCD     ADC0_IRQHandler           ; 25: ADC0
+                DCD     ADC1_IRQHandler           ; 26: ADC1
+                DCD     ADC2_IRQHandler           ; 27: ADC2
+                DCD     MFT_FRT_IRQHandler        ; 28: Free-run Timer
+                DCD     MFT_IPC_IRQHandler        ; 29: Input Capture
+                DCD     MFT_OPC_IRQHandler        ; 30: Output Compare
+                DCD     BT0_7_IRQHandler          ; 31: Base Timer ch.0 to ch.7
+                DCD     ETHER_MAC0_IRQHandler     ; 32: Ethernet MAC ch.0
+                DCD     ETHER_MAC1_IRQHandler     ; 33: Ethernet MAC ch.1
+                DCD     USB0F_Handler             ; 34: USB0 Function
+                DCD     USB0_Handler              ; 35: USB0 Function / USB0 HOST
+                DCD     USB1F_Handler             ; 36: USB1 Function
+                DCD     USB1_Handler              ; 37: USB1 Function / USB1 HOST
+                DCD     DMAC0_Handler             ; 38: DMAC ch.0
+                DCD     DMAC1_Handler             ; 39: DMAC ch.1
+                DCD     DMAC2_Handler             ; 40: DMAC ch.2
+                DCD     DMAC3_Handler             ; 41: DMAC ch.3
+                DCD     DMAC4_Handler             ; 42: DMAC ch.4
+                DCD     DMAC5_Handler             ; 43: DMAC ch.5
+                DCD     DMAC6_Handler             ; 44: DMAC ch.6
+                DCD     DMAC7_Handler             ; 45: DMAC ch.7
+                DCD     BT8_15_IRQHandler         ; 46: Base Timer ch.8 to ch.15
+                DCD     DummyHandler              ; 47: Reserved
+
+                THUMB
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+                PUBWEAK Reset_Handler
+                SECTION .text:CODE:REORDER(2)
+Reset_Handler
+                LDR     R0, =SystemInit
+                BLX     R0
+                LDR     R0, =__iar_program_start
+                BX      R0
+
+                PUBWEAK NMI_Handler
+                SECTION .text:CODE:REORDER(1)
+NMI_Handler
+                B       NMI_Handler
+
+                PUBWEAK HardFault_Handler
+                SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+                B       HardFault_Handler
+
+                PUBWEAK MemManage_Handler
+                SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+                B       MemManage_Handler
+
+                PUBWEAK BusFault_Handler
+                SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+                B       BusFault_Handler
+
+                PUBWEAK UsageFault_Handler
+                SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+                B       UsageFault_Handler
+
+                PUBWEAK SVC_Handler
+                SECTION .text:CODE:REORDER(1)
+SVC_Handler
+                B       SVC_Handler
+
+                PUBWEAK DebugMon_Handler
+                SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+                B       DebugMon_Handler
+
+                PUBWEAK PendSV_Handler
+                SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+                B       PendSV_Handler
+
+                PUBWEAK SysTick_Handler
+                SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+                B       SysTick_Handler
+
+
+
+                PUBWEAK CSV_Handler
+                SECTION .text:CODE:REORDER(1)
+CSV_Handler
+                B       CSV_Handler
+
+                PUBWEAK SWDT_Handler
+                SECTION .text:CODE:REORDER(1)
+SWDT_Handler
+                B       SWDT_Handler
+
+                PUBWEAK LVD_Handler
+                SECTION .text:CODE:REORDER(1)
+LVD_Handler
+                B       LVD_Handler
+
+                PUBWEAK MFT_WG_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFT_WG_IRQHandler
+                B       MFT_WG_IRQHandler
+                
+                PUBWEAK INT0_7_Handler
+                SECTION .text:CODE:REORDER(1)
+INT0_7_Handler
+                B       INT0_7_Handler
+
+                PUBWEAK INT8_31_Handler
+                SECTION .text:CODE:REORDER(1)
+INT8_31_Handler
+                B       INT8_31_Handler
+                
+                PUBWEAK DT_Handler
+                SECTION .text:CODE:REORDER(1)
+DT_Handler
+                B       DT_Handler
+
+                PUBWEAK MFS0RX_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFS0RX_IRQHandler
+                B       MFS0RX_IRQHandler
+
+                PUBWEAK MFS0TX_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFS0TX_IRQHandler
+                B       MFS0TX_IRQHandler
+
+                PUBWEAK MFS1RX_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFS1RX_IRQHandler
+                B       MFS1RX_IRQHandler
+
+                PUBWEAK MFS1TX_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFS1TX_IRQHandler
+                B       MFS1TX_IRQHandler
+
+                PUBWEAK MFS2RX_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFS2RX_IRQHandler
+                B       MFS2RX_IRQHandler
+
+                PUBWEAK MFS2TX_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFS2TX_IRQHandler
+                B       MFS2TX_IRQHandler
+
+                PUBWEAK MFS3RX_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFS3RX_IRQHandler
+                B       MFS3RX_IRQHandler
+
+                PUBWEAK MFS3TX_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFS3TX_IRQHandler
+                B       MFS3TX_IRQHandler
+
+                PUBWEAK MFS4RX_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFS4RX_IRQHandler
+                B       MFS4RX_IRQHandler
+
+                PUBWEAK MFS4TX_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFS4TX_IRQHandler
+                B       MFS4TX_IRQHandler
+
+                PUBWEAK MFS5RX_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFS5RX_IRQHandler
+                B       MFS5RX_IRQHandler
+
+                PUBWEAK MFS5TX_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFS5TX_IRQHandler
+                B       MFS5TX_IRQHandler
+
+                PUBWEAK MFS6RX_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFS6RX_IRQHandler
+                B       MFS6RX_IRQHandler
+
+                PUBWEAK MFS6TX_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFS6TX_IRQHandler
+                B       MFS6TX_IRQHandler
+
+                PUBWEAK MFS7RX_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFS7RX_IRQHandler
+                B       MFS7RX_IRQHandler
+
+                PUBWEAK MFS7TX_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFS7TX_IRQHandler
+                B       MFS7TX_IRQHandler
+
+                PUBWEAK PPG_Handler
+                SECTION .text:CODE:REORDER(1)
+PPG_Handler
+                B       PPG_Handler
+
+                PUBWEAK TIM_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+TIM_IRQHandler
+                B       TIM_IRQHandler
+
+                PUBWEAK ADC0_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+ADC0_IRQHandler
+                B       ADC0_IRQHandler
+
+                PUBWEAK ADC1_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+ADC1_IRQHandler
+                B       ADC1_IRQHandler
+
+                PUBWEAK ADC2_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+ADC2_IRQHandler
+                B       ADC2_IRQHandler
+
+                PUBWEAK MFT_FRT_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFT_FRT_IRQHandler
+                B       MFT_FRT_IRQHandler
+
+                PUBWEAK MFT_IPC_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFT_IPC_IRQHandler
+                B       MFT_IPC_IRQHandler
+
+                PUBWEAK MFT_OPC_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+MFT_OPC_IRQHandler
+                B       MFT_OPC_IRQHandler
+
+                PUBWEAK BT0_7_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+BT0_7_IRQHandler
+                B       BT0_7_IRQHandler
+
+                PUBWEAK ETHER_MAC0_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+ETHER_MAC0_IRQHandler
+                B       ETHER_MAC0_IRQHandler
+
+                PUBWEAK ETHER_MAC1_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+ETHER_MAC1_IRQHandler
+                B       ETHER_MAC1_IRQHandler
+
+                PUBWEAK USB0F_Handler
+                SECTION .text:CODE:REORDER(1)
+USB0F_Handler
+                B       USB0F_Handler
+
+                PUBWEAK USB0_Handler
+                SECTION .text:CODE:REORDER(1)
+USB0_Handler
+                B       USB0_Handler
+
+                PUBWEAK USB1F_Handler
+                SECTION .text:CODE:REORDER(1)
+USB1F_Handler
+                B       USB1F_Handler
+
+                PUBWEAK USB1_Handler
+                SECTION .text:CODE:REORDER(1)
+USB1_Handler
+                B       USB1_Handler
+
+                PUBWEAK DMAC0_Handler
+                SECTION .text:CODE:REORDER(1)
+DMAC0_Handler
+                B       DMAC0_Handler
+
+
+                PUBWEAK DMAC1_Handler
+                SECTION .text:CODE:REORDER(1)
+DMAC1_Handler
+                B       DMAC1_Handler
+
+                PUBWEAK DMAC2_Handler
+                SECTION .text:CODE:REORDER(1)
+DMAC2_Handler
+                B       DMAC2_Handler
+
+                PUBWEAK DMAC3_Handler
+                SECTION .text:CODE:REORDER(1)
+DMAC3_Handler
+                B       DMAC3_Handler
+
+                PUBWEAK DMAC4_Handler
+                SECTION .text:CODE:REORDER(1)
+DMAC4_Handler
+                B       DMAC4_Handler
+
+                PUBWEAK DMAC5_Handler
+                SECTION .text:CODE:REORDER(1)
+DMAC5_Handler
+                B       DMAC5_Handler
+
+                PUBWEAK DMAC6_Handler
+                SECTION .text:CODE:REORDER(1)
+DMAC6_Handler
+                B       DMAC6_Handler
+
+                PUBWEAK DMAC7_Handler
+                SECTION .text:CODE:REORDER(1)
+DMAC7_Handler
+                B       DMAC7_Handler
+
+                PUBWEAK BT8_15_IRQHandler
+                SECTION .text:CODE:REORDER(1)
+BT8_15_IRQHandler
+                B       BT8_15_IRQHandler
+
+                PUBWEAK DummyHandler
+                SECTION .text:CODE:REORDER(1)
+DummyHandler
+                B       DummyHandler
+
+                END

bsp/mb9bf618s/CMSIS/DeviceSupport/fujitsu/mb9bf61x/system_mb9bf61x.c

@@ -0,0 +1,206 @@
+/************************************************************************/
+/*               (C) Fujitsu Semiconductor Europe GmbH (FSEU)           */
+/*                                                                      */
+/* The following software deliverable is intended for and must only be  */
+/* used for reference and in an evaluation laboratory environment.      */
+/* It is provided on an as-is basis without charge and is subject to    */
+/* alterations.                                                         */
+/* It is the user's obligation to fully test the software in its        */
+/* environment and to ensure proper functionality, qualification and    */
+/* compliance with component specifications.                            */
+/*                                                                      */
+/* In the event the software deliverable includes the use of open       */
+/* source components, the provisions of the governing open source       */
+/* license agreement shall apply with respect to such software          */
+/* deliverable.                                                         */
+/* FSEU does not warrant that the deliverables do not infringe any      */
+/* third party intellectual property right (IPR). In the event that     */
+/* the deliverables infringe a third party IPR it is the sole           */
+/* responsibility of the customer to obtain necessary licenses to       */
+/* continue the usage of the deliverable.                               */
+/*                                                                      */
+/* To the maximum extent permitted by applicable law FSEU disclaims all */
+/* warranties, whether express or implied, in particular, but not       */
+/* limited to, warranties of merchantability and fitness for a          */
+/* particular purpose for which the deliverable is not designated.      */
+/*                                                                      */
+/* To the maximum extent permitted by applicable law, FSEU's liability  */
+/* is restricted to intentional misconduct and gross negligence.        */
+/* FSEU is not liable for consequential damages.                        */
+/*                                                                      */
+/* (V1.5)                                                               */
+/************************************************************************/
+
+#include "board.h"
+
+/** \file system_mb9bf61x.c
+ **
+ ** FM3 system initialization functions
+ ** All adjustments can be done in belonging header file.
+ **
+ ** History:
+ ** 2011-07-07 V1.0 MWi original version
+ ******************************************************************************/
+
+/**
+ ******************************************************************************
+ ** System Clock Frequency (Core Clock) Variable according CMSIS
+ ******************************************************************************/
+uint32_t SystemCoreClock = __HCLK;
+
+/**
+ ******************************************************************************
+ ** \brief  Update the System Core Clock with current core Clock retrieved from
+ ** cpu registers.
+ ** \param  none
+ ** \return none
+ ******************************************************************************/
+void SystemCoreClockUpdate (void) {
+  uint32_t masterClk;
+  uint32_t u32RegisterRead; // Workaround variable for MISRA C rule conformance
+
+  switch ((FM3_CRG->SCM_CTL >> 5) & 0x07) {
+    case 0:                                 /* internal High-speed Cr osc.    */
+      masterClk = __CLKHC;
+      break;
+
+    case 1:                                 /* external main osc.             */
+      masterClk = __CLKMO;
+      break;
+
+    case 2:                                 /* PLL clock                      */
+  // Workaround for preventing MISRA C:1998 Rule 46 (MISRA C:2004 Rule 12.2)
+  // violation:
+  //   "Unordered accesses to a volatile location"
+      u32RegisterRead = (__CLKMO  * (((FM3_CRG->PLL_CTL2) & 0x1F) + 1));
+      masterClk = (u32RegisterRead / (((FM3_CRG->PLL_CTL1 >> 4) & 0x0F) + 1));
+      break;
+
+    case 4:                                 /* internal Low-speed CR osc.     */
+      masterClk = __CLKLC;
+      break;
+
+    case 5:                                 /* external Sub osc.              */
+      masterClk = __CLKSO;
+      break;
+
+    default:
+      masterClk = 0Ul;
+      break;
+  }
+
+  switch (FM3_CRG->BSC_PSR & 0x07) {
+    case 0:
+      SystemCoreClock = masterClk;
+      break;
+
+    case 1:
+      SystemCoreClock = masterClk / 2;
+      break;
+
+    case 2:
+      SystemCoreClock = masterClk / 3;
+      break;
+
+    case 3:
+      SystemCoreClock = masterClk / 4;
+      break;
+
+    case 4:
+      SystemCoreClock = masterClk / 6;
+      break;
+
+    case 5:
+      SystemCoreClock = masterClk /8;
+      break;
+
+    case 6:
+      SystemCoreClock = masterClk /16;
+      break;
+
+    default:
+      SystemCoreClock = 0Ul;
+      break;
+  }
+
+}
+
+/**
+ ******************************************************************************
+ ** \brief  Setup the microcontroller system. Initialize the System and update
+ ** the SystemCoreClock variable.
+ **
+ ** \param  none
+ ** \return none
+ ******************************************************************************/
+void SystemInit (void) {
+
+  static uint32_t u32IoRegisterRead;  // Workaround variable for MISRA C rule conformance
+
+#if (HWWD_DISABLE)                                 /* HW Watchdog Disable */
+  FM3_HWWDT->WDG_LCK = 0x1ACCE551;                 /* HW Watchdog Unlock */
+  FM3_HWWDT->WDG_LCK = 0xE5331AAE;
+  FM3_HWWDT->WDG_CTL = 0;                          /* HW Watchdog stop */
+#endif
+
+#if (CLOCK_SETUP)                                   /* Clock Setup */
+  FM3_CRG->BSC_PSR   = BSC_PSR_Val;                /* set System Clock presacaler */
+  FM3_CRG->APBC0_PSR = APBC0_PSR_Val;              /* set APB0 presacaler */
+  FM3_CRG->APBC1_PSR = APBC1_PSR_Val;              /* set APB1 presacaler */
+  FM3_CRG->APBC2_PSR = APBC2_PSR_Val;              /* set APB2 presacaler */
+  FM3_CRG->SWC_PSR   = SWC_PSR_Val | (1UL << 7);   /* set SW Watchdog presacaler */
+  FM3_CRG->TTC_PSR   = TTC_PSR_Val;                /* set Trace Clock presacaler */
+
+  FM3_CRG->CSW_TMR   = CSW_TMR_Val;                /* set oscillation stabilization wait time */
+
+  if (SCM_CTL_Val & (1UL << 1)) {                    /* Main clock oscillator enabled ? */
+    FM3_CRG->SCM_CTL |= (1UL << 1);                /* enable main oscillator */
+    while (!(FM3_CRG->SCM_STR & (1UL << 1)));      /* wait for Main clock oscillation stable */
+  }
+
+  if (SCM_CTL_Val & (1UL << 3)) {                    /* Sub clock oscillator enabled ? */
+    FM3_CRG->SCM_CTL |= (1UL << 3);                /* enable sub oscillator */
+    while (!(FM3_CRG->SCM_STR & (1UL << 3)));      /* wait for Sub clock oscillation stable */
+  }
+
+  FM3_CRG->PSW_TMR   = PSW_TMR_Val;                /* set PLL stabilization wait time */
+  FM3_CRG->PLL_CTL1  = PLL_CTL1_Val;               /* set PLLM and PLLK */
+  FM3_CRG->PLL_CTL2  = PLL_CTL2_Val;               /* set PLLN          */
+
+  if (SCM_CTL_Val & (1UL << 4)) {                    /* PLL enabled ? */
+    FM3_CRG->SCM_CTL  |= (1UL << 4);               /* enable PLL */
+    while (!(FM3_CRG->SCM_STR & (1UL << 4)));      /* wait for PLL stable */
+  }
+
+  FM3_CRG->SCM_CTL  |= (SCM_CTL_Val & 0xE0);       /* Set Master Clock switch */
+
+  {
+      volatile unsigned int i;
+      for(i=0;i<200000;i++);
+  }
+  // Workaround for preventing MISRA C:1998 Rule 46 (MISRA C:2004 Rule 12.2)
+  // violations:
+  //   "Unordered reads and writes to or from same location" and
+  //   "Unordered accesses to a volatile location"
+  do
+  {
+    u32IoRegisterRead = (FM3_CRG->SCM_CTL & 0xE0);
+  }while ((FM3_CRG->SCM_STR & 0xE0) != u32IoRegisterRead);
+#endif // (CLOCK_SETUP)
+
+#if (CR_TRIM_SETUP)
+  /* CR Trimming Data  */
+  if( 0x000003FF != (FM3_FLASH_IF->CRTRMM & 0x000003FF) )
+  {
+    /* UnLock (MCR_FTRM) */
+    FM3_CRTRIM->MCR_RLR = 0x1ACCE554;
+    /* Set MCR_FTRM */
+    FM3_CRTRIM->MCR_FTRM = FM3_FLASH_IF->CRTRMM;
+    /* Lock (MCR_FTRM) */
+    FM3_CRTRIM->MCR_RLR = 0x00000000;
+  }
+#endif // (CR_TRIM_SETUP)
+}
+
+
+

bsp/mb9bf618s/CMSIS/DeviceSupport/fujitsu/mb9bf61x/system_mb9bf61x.h

@@ -0,0 +1,678 @@
+/************************************************************************/
+/*               (C) Fujitsu Semiconductor Europe GmbH (FSEU)           */
+/*                                                                      */
+/* The following software deliverable is intended for and must only be  */
+/* used for reference and in an evaluation laboratory environment.      */
+/* It is provided on an as-is basis without charge and is subject to    */
+/* alterations.                                                         */
+/* It is the user's obligation to fully test the software in its        */
+/* environment and to ensure proper functionality, qualification and    */
+/* compliance with component specifications.                            */
+/*                                                                      */
+/* In the event the software deliverable includes the use of open       */
+/* source components, the provisions of the governing open source       */
+/* license agreement shall apply with respect to such software          */
+/* deliverable.                                                         */
+/* FSEU does not warrant that the deliverables do not infringe any      */
+/* third party intellectual property right (IPR). In the event that     */
+/* the deliverables infringe a third party IPR it is the sole           */
+/* responsibility of the customer to obtain necessary licenses to       */
+/* continue the usage of the deliverable.                               */
+/*                                                                      */
+/* To the maximum extent permitted by applicable law FSEU disclaims all */
+/* warranties, whether express or implied, in particular, but not       */
+/* limited to, warranties of merchantability and fitness for a          */
+/* particular purpose for which the deliverable is not designated.      */
+/*                                                                      */
+/* To the maximum extent permitted by applicable law, FSEU's liability  */
+/* is restricted to intentional misconduct and gross negligence.        */
+/* FSEU is not liable for consequential damages.                        */
+/*                                                                      */
+/* (V1.5)                                                               */
+/************************************************************************/
+/** \file system_mb9bf61x.h
+ **
+ ** Headerfile for FM3 system parameters
+ **
+ ** User clock definitions can be done for the following clock settings:
+ ** - CLOCK_SETUP : Execute the clock settings form the settings below in
+ **                 SystemInit()
+ ** - __CLKMO : External clock frequency for main oscillion
+ ** - __CLKSO : External clock frequency for sub oscillion
+ ** - SCM_CTL : System Clock Mode Control Register
+ ** - BSC_PSR : Base Clock Prescaler Register
+ ** - APBC0_PSR : APB0 Prescaler Register
+ ** - APBC1_PSR : APB1 Prescaler Register
+ ** - APBC2_PSR : APB2 Prescaler Register
+ ** - SWC_PSR : Software Watchdog Clock Prescaler Register
+ ** - TTC_PSR : Trace Clock Prescaler Register
+ ** - CSW_TMR : Clock Stabilization Wait Time Register
+ ** - PSW_TMR : PLL Clock Stabilization Wait Time Setup Register
+ ** - PLL_CTL1 : PLL Control Register 1
+ ** - PLL_CTL2 : PLL Control Register 2
+ **
+ ** The register settings are check for correct values of reserved bits.
+ ** Otherwise a preprocessor error is output and stops the build process.
+ ** Furthermore the 'master clock' is retrieved from the register settings
+ ** and the system clock (HCLK) is calculated from the Base Clock Prescaler
+ ** Register (BSC_PSR). This value is used for the global CMSIS variable
+ ** #SystemCoreClock. Also the absolute external, PLL and HCL freqeuncy is
+ ** is checked. Note that not all possible wrong setting are checked! The
+ ** user has to take care to fulfill the settings stated in the according
+ ** device's data sheet!
+ **
+ ** User definition for Hardware Watchdog:
+ ** - HWWD_DISABLE : Disables Hardware Watchdog in SystemInit()
+ **
+ ** User definition for CR Trimming:
+ ** - CR_TRIM_SETUP : Enables CR trimming in SystemInit()
+ **
+ ** History:
+ ** 2011-05-16 V1.0 MWi original version
+ *****************************************************************************/
+
+#ifndef _SYSTEM_MB9BF61X_H_
+#define _SYSTEM_MB9BF61X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif 
+
+/******************************************************************************/
+/* Include files                                                              */
+/******************************************************************************/
+   
+#include <stdint.h>
+
+/******************************************************************************/
+/* Global pre-processor symbols/macros ('define')                             */
+/******************************************************************************/
+   
+/******************************************************************************/
+/*                                                                            */
+/*                      START OF USER SETTINGS HERE                           */
+/*                      ===========================                           */   
+/*                                                                            */
+/*                 All lines with '<<<' can be set by user.                   */
+/*                                                                            */
+/******************************************************************************/
+
+/**
+ ******************************************************************************
+ ** \brief Clock Setup Enable
+ **        <i>(USER SETTING)</i>
+ **
+ ** - 0 = No clock setup done by system_mb9xfxxx.c
+ ** - 1 = Clock setup done by system_mb9xfxxx.c
+ ******************************************************************************/ 
+#define CLOCK_SETUP               1   // <<< Define clock setup here
+
+/**
+ ******************************************************************************
+ ** \brief External Main Clock Frequency (in Hz, [value]UL)
+ **        <i>(USER SETTING)</i>
+ ******************************************************************************/    
+#define __CLKMO        ( 4000000UL)   // <<< External   4MHz Crystal
+
+/**
+ ******************************************************************************
+ ** \brief External Sub Clock Frequency (in Hz, [value]UL)
+ **        <i>(USER SETTING)</i>
+ ******************************************************************************/  
+#define __CLKSO        (   32768UL)   // <<<  External  32KHz Crystal
+
+/**
+ ******************************************************************************
+ ** \brief System Clock Mode Control Register value definition
+ **        <i>(USER SETTING)</i>
+ ** 
+ ** SCM_CTL
+ **
+ ** Bit#7-5 : RCS[2:0]
+ ** - 0 = Internal high-speed CR oscillation (default)
+ ** - 1 = Main oscillation clock
+ ** - 2 = PLL oscillation clock
+ ** - 3 = (not allowed)
+ ** - 4 = Internal low-speed CR oscillation
+ ** - 5 = Sub clock oscillation
+ ** - 6 = (not allowed)
+ ** - 7 = (not allowed)
+ **
+ ** Bit#4 : PLLE
+ ** - 0 = Disable PLL (default)
+ ** - 1 = Enable PLL
+ **
+ ** Bit#3 : SOSCE
+ ** - 0 = Disable sub oscillation (default)
+ ** - 1 = Enable sub oscillation
+ **
+ ** Bit#2 : (reserved)
+ **
+ ** Bit#1 : MOSCE
+ ** - 0 = Disable main oscillation (default)
+ ** - 1 = Enable main oscillation  
+ **
+ ** Bit#0 : (reserved)  
+ ******************************************************************************/ 
+#define SCM_CTL_Val           0x00000052    // <<< Define SCM_CTL here
+
+/**
+ ******************************************************************************
+ ** \brief Base Clock Prescaler Register value definition
+ **        <i>(USER SETTING)</i>
+ **
+ ** BSC_PSR
+ **
+ ** Bit#7-3 : (reserved)
+ **
+ ** Bit#2-0 : BSR[2:0]
+ ** - 0 = HCLK = Master Clock
+ ** - 1 = HCLK = Master Clock / 2
+ ** - 2 = HCLK = Master Clock / 3
+ ** - 3 = HCLK = Master Clock / 4
+ ** - 4 = HCLK = Master Clock / 6
+ ** - 5 = HCLK = Master Clock / 8
+ ** - 6 = HCLK = Master Clock / 16
+ ** - 7 = (reserved)
+ ******************************************************************************/    
+#define BSC_PSR_Val           0x00000000    // <<< Define BSC_PSR here
+ 
+/**
+ ******************************************************************************
+ ** \brief APB0 Prescaler Register value definition
+ **        <i>(USER SETTING)</i>
+ ** 
+ ** APBC0_PSR
+ **
+ ** Bit#7-2 : (reserved)
+ **
+ ** Bit#1-0 : BSR[2:0] 
+ ** - 0 = PCLK0 = HCLK
+ ** - 1 = PCLK0 = HCLK / 2
+ ** - 2 = PCLK0 = HCLK / 4
+ ** - 3 = PCLK0 = HCLK / 8
+ ******************************************************************************/    
+#define APBC0_PSR_Val         0x00000001     // <<< Define APBC0_PSR here
+   
+/**
+ ******************************************************************************
+ ** \brief APB1 Prescaler Register value definition
+ **        <i>(USER SETTING)</i>
+ ** 
+ ** APBC1_PSR
+ **
+ ** Bit#7 : APBC1EN
+ ** - 0 = Disable PCLK1 output
+ ** - 1 = Enables PCLK1 (default)
+ **
+ ** Bit#6-5 : (reserved)
+ **
+ ** Bit#4 : APBC1RST
+ ** - 0 = APB1 bus reset, inactive (default)
+ ** - 1 = APB1 bus reset, active  
+ **
+ ** Bit#3-2 : (reserved)
+ **
+ ** Bit#1-0 : APBC1[2:0]
+ ** - 0 = PCLK1 = HCLK
+ ** - 1 = PCLK1 = HCLK / 2
+ ** - 2 = PCLK1 = HCLK / 4
+ ** - 3 = PCLK1 = HCLK / 8
+ ******************************************************************************/     
+#define APBC1_PSR_Val         0x00000081    // <<< Define APBC1_PSR here
+   
+/**
+ ******************************************************************************
+ ** \brief APB2 Prescaler Register value definition
+ **        <i>(USER SETTING)</i>
+ ** 
+ ** APBC2_PSR
+ **
+ ** Bit#7 : APBC2EN
+ ** - 0 = Disable PCLK2 output
+ ** - 1 = Enables PCLK2 (default)
+ **
+ ** Bit#6-5 : (reserved)
+ ** 
+ ** Bit#4 : APBC2RST
+ ** - 0 = APB2 bus reset, inactive (default)
+ ** - 1 = APB2 bus reset, active  
+ **
+ ** Bit#3-2 : (reserved)
+ **
+ ** Bit#1-0 : APBC2[1:0]
+ ** - 0 = PCLK2 = HCLK
+ ** - 1 = PCLK2 = HCLK / 2
+ ** - 2 = PCLK2 = HCLK / 4
+ ** - 3 = PCLK2 = HCLK / 8
+ ******************************************************************************/    
+#define APBC2_PSR_Val         0x00000081    // <<< Define APBC2_PSR here
+
+/**
+ ******************************************************************************
+ ** \brief Software Watchdog Clock Prescaler Register value definition
+ **        <i>(USER SETTING)</i>
+ ** 
+ ** SWC_PSR
+ **
+ ** Bit#7 : TESTB
+ ** - 0 = (not allowed)
+ ** - 1 = (always write "1" to this bit)
+ **
+ ** Bit#6-2 : (reserved)
+ **
+ ** Bit#1-0 : SWDS[2:0]
+ ** - 0 = SWDGOGCLK = PCLK0
+ ** - 1 = SWDGOGCLK = PCLK0 / 2
+ ** - 2 = SWDGOGCLK = PCLK0 / 4
+ ** - 3 = SWDGOGCLK = PCLK0 / 8
+ ******************************************************************************/  
+#define SWC_PSR_Val           0x00000003    // <<< Define SWC_PSR here
+
+/**
+ ******************************************************************************
+ ** \brief Trace Clock Prescaler Register value definition
+ **        <i>(USER SETTING)</i>
+ ** 
+ ** TTC_PSR
+ **
+ ** Bit#7-1 : (reserved)
+ **
+ ** Bit#0 : TTC
+ ** - 0 = TPIUCLK = HCLK
+ ** - 1 = TPIUCLK = HCLK / 2
+ ******************************************************************************/  
+#define TTC_PSR_Val           0x00000000    // <<< Define TTC_PSR here
+ 
+/**
+ ******************************************************************************
+ ** \brief Clock Stabilization Wait Time Register value definition
+ **        <i>(USER SETTING)</i>
+ ** 
+ ** CSW_TMR
+ **
+ ** Bit#7 : (reserved)
+ **
+ ** Bit#6-4 : SOWT[2:0]
+ ** - 0 = ~10.3 ms (default)
+ ** - 1 = ~20.5 ms
+ ** - 2 = ~41 ms
+ ** - 3 = ~82 ms
+ ** - 4 = ~164 ms
+ ** - 5 = ~327 ms
+ ** - 6 = ~655 ms
+ ** - 7 = ~1.31 s 
+ **
+ ** Bit#3-0 : MOWT[3:0]
+ ** - 0 = ~500 ns (default)
+ ** - 1 = ~8 us
+ ** - 2 = ~16 us
+ ** - 3 = ~32 us
+ ** - 4 = ~64 us
+ ** - 5 = ~128 us
+ ** - 6 = ~256 us
+ ** - 7 = ~512 us
+ ** - 8 = ~1.0 ms
+ ** - 9 = ~2.0 ms
+ ** - 10 = ~4.0 ms
+ ** - 11 = ~8.0 ms
+ ** - 12 = ~33.0 ms
+ ** - 13 = ~131 ms
+ ** - 14 = ~524 ms
+ ** - 15 = ~2.0 s
+ ******************************************************************************/     
+#define CSW_TMR_Val           0x0000005C    // <<< Define CSW_TMR here
+
+/**
+ ******************************************************************************
+ ** \brief PLL Clock Stabilization Wait Time Setup Register value definition
+ **        <i>(USER SETTING)</i>
+ ** 
+ ** PSW_TMR
+ **
+ ** Bit#7-5 : (reserved)
+ **
+ ** Bit#4 : PINC
+ ** - 0 = Selects CLKMO (main oscillation) (default)
+ ** - 1 = (setting diabled)
+ **
+ ** Bit#3 : (reserved)
+ **
+ ** Bit#2-0 : POWT[2:0]
+ ** - 0 = ~128 us (default) 
+ ** - 1 = ~256 us
+ ** - 2 = ~512 us
+ ** - 3 = ~1.02 ms
+ ** - 4 = ~2.05 ms
+ ** - 5 = ~4.10 ms
+ ** - 6 = ~8.20 ms
+ ** - 7 = ~16.40 ms
+ ******************************************************************************/    
+#define PSW_TMR_Val           0x00000000    // <<< Define PSW_TMR here
+
+/**
+ ******************************************************************************
+ ** \brief PLL Control Register 1 value definition
+ **        <i>(USER SETTING)</i>
+ ** 
+ ** PLL_CTL1
+ **
+ ** Bit#7-4 : PLLK[3:0]
+ ** - 0 = Division(PLLK) = 1/1 (default)
+ ** - 1 = Division(PLLK) = 1/2
+ ** - 2 = Division(PLLK) = 1/3
+ ** - . . .
+ ** - 15 = Division(PLLK) = 1/16
+ **
+ ** Bit#3-0 : PLLM[3:0]
+ ** - 0 = Division(PLLM) = 1/1 (default)
+ ** - 1 = Division(PLLM) = 1/2
+ ** - 2 = Division(PLLM) = 1/3
+ ** - . . .
+ ** - 15 = Division(PLLM) = 1/16
+ ******************************************************************************/    
+#define PLL_CTL1_Val          0x00000001    // <<< Define PLL_CTL1 here
+
+/**
+ ******************************************************************************
+ ** \brief PLL Control Register 2 value definition
+ **        <i>(USER SETTING)</i>
+ ** 
+ ** PLL_CTL2
+ **
+ ** Bit#7-6 : (reserved)
+ **
+ ** Bit#5-0 : PLLN[5:0]
+ ** - 0 = Division(PLLN) = 1/1 (default)
+ ** - 1 = Division(PLLN) = 1/2
+ ** - 2 = Division(PLLN) = 1/3
+ ** - . . .
+ ** - 63 = Division(PLLN) = 1/64
+ ******************************************************************************/    
+#define PLL_CTL2_Val          0x00000023    // <<< Define PLL_CTL2 here
+   
+/**
+ ******************************************************************************
+ ** \brief Hardware Watchdog disable definition
+ **        <i>(USER SETTING)</i>
+ **
+ ** - 0 = Hardware Watchdog enable
+ ** - 1 = Hardware Watchdog disable
+ ******************************************************************************/  
+#define HWWD_DISABLE          1   // <<< Define HW Watach dog enable here
+
+/**
+ ******************************************************************************
+ ** \brief Trimming CR
+ **        <i>(USER SETTING)</i>
+ **
+ ** - 0 = CR is not trimmed at startup
+ ** - 1 = CR is trimmed at startup
+ ******************************************************************************/  
+#define CR_TRIM_SETUP         1   // <<< Define CR trimming at startup enable here
+
+   
+/******************************************************************************/
+/*                                                                            */
+/*                         END OF USER SETTINGS HERE                          */
+/*                         =========================                          */ 
+/*                                                                            */
+/******************************************************************************/
+
+/******************************************************************************/
+/* Device dependent System Clock absolute maximum ranges                      */
+/******************************************************************************/
+
+/**
+ ******************************************************************************
+ ** \brief Internal High-Speed CR Oscillator Frequency (in Hz, [value]UL)
+ **        <i>(USER SETTING)</i>
+ ******************************************************************************/    
+#define __CLKHC        ( 4000000UL)         /* Internal   4MHz CR Oscillator  */
+   
+/**
+ ******************************************************************************
+ ** \brief Internal Low-Speed CR Oscillator Frequency (in Hz, [value]UL)
+ **        <i>(USER SETTING)</i>
+ ******************************************************************************/ 
+#define __CLKLC        (  100000UL)         /* Internal 100KHz CR Oscillator  */  
+
+/**
+ ******************************************************************************
+ ** \brief Any case minimum Main Clock frequency (in Hz, [value]UL)
+ **        <i>(DEVICE DEPENDENT SETTING)</i>
+ ******************************************************************************/ 
+#define __CLKMOMIN    (  4000000UL)
+   
+/**
+ ******************************************************************************
+ ** \brief Maximum Main Clock frequency using external clock
+ **        <i>(DEVICE DEPENDENT SETTING)</i>
+ ******************************************************************************/ 
+#define __CLKMOMAX    ( 50000000UL)
+
+/**
+ ******************************************************************************
+ ** \brief Any case minimum Sub Clock frequency
+ **        <i>(DEVICE DEPENDENT SETTING)</i>
+ ******************************************************************************/ 
+#define __CLKSOMIN    (    32000UL)
+   
+/**
+ ******************************************************************************
+ ** \brief Maximum Sub Clock frequency using external clock
+ **        <i>(DEVICE DEPENDENT SETTING)</i>
+ ******************************************************************************/ 
+#define __CLKSOMAX    (   100000UL)
+   
+/**
+ ******************************************************************************
+ ** \brief Absolute minimum PLL input frequency
+ **        <i>(DEVICE DEPENDENT SETTING)</i>
+ ******************************************************************************/ 
+#define __PLLCLKINMIN (  4000000UL)
+   
+/**
+ ******************************************************************************
+ ** \brief Absolute maximum PLL input frequency
+ **        <i>(DEVICE DEPENDENT SETTING)</i>
+ ******************************************************************************/ 
+#define __PLLCLKINMAX ( 16000000UL)
+
+/**
+ ******************************************************************************
+ ** \brief Absolute minimum PLL oscillation frequency
+ **        <i>(DEVICE DEPENDENT SETTING)</i>
+ ******************************************************************************/ 
+#define __PLLCLKMIN   (200000000UL)
+   
+/**
+ ******************************************************************************
+ ** \brief Absolute maximum PLL oscillation  frequency
+ **        <i>(DEVICE DEPENDENT SETTING)</i>
+ ******************************************************************************/ 
+#define __PLLCLKMAX   (300000000UL)
+
+/**
+ ******************************************************************************
+ ** \brief Absolute maximum System Clock frequency (HCLK)
+ **        <i>(DEVICE DEPENDENT SETTING)</i>
+ ******************************************************************************/ 
+#define __HCLKMAX     (144000000UL)
+
+/**
+ ******************************************************************************
+ ** \brief Preprocessor macro for checking range (clock settings)
+ ******************************************************************************/ 
+#define CHECK_RANGE(val, min, max)                ((val < min) || (val > max))
+   
+/**
+ ******************************************************************************
+ ** \brief Preprocessor macro for checking bits with mask (clock settings)
+ ******************************************************************************/ 
+#define CHECK_RSVD(val, mask)                     (val & mask)
+
+
+/******************************************************************************/
+/* Check register settings                                                    */
+/******************************************************************************/
+#if (CHECK_RSVD((SCM_CTL_Val),    ~0x000000FA))
+   #error "SCM_CTL: Invalid values of reserved bits!"
+#endif
+
+#if ((SCM_CTL_Val & 0xE0) == 0x40) && ((SCM_CTL_Val & 0x10) != 0x10)
+   #error "SCM_CTL: CLKPLL is selected but PLL is not enabled!"
+#endif
+
+#if (CHECK_RSVD((CSW_TMR_Val),    ~0x0000007F))
+   #error "CSW_TMR: Invalid values of reserved bits!"
+#endif
+
+#if ((SCM_CTL_Val & 0x10))       /* if PLL is used */
+  #if (CHECK_RSVD((PSW_TMR_val),  ~0x00000007))
+     #error "PSW_TMR: Invalid values of reserved bits!"
+  #endif
+
+  #if (CHECK_RSVD((PLL_CTL1_Val), ~0x000000FF))
+     #error "PLL_CTL1: Invalid values of reserved bits!"
+  #endif
+
+  #if (CHECK_RSVD((PLL_CTL2_Val), ~0x0000003F))
+    #error "PLL_CTL2: Invalid values of reserved bits!"
+  #endif
+#endif
+
+#if (CHECK_RSVD((BSC_PSR_Val),    ~0x00000007))
+  #error "BSC_PSR: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RSVD((APBC0_PSR_Val),  ~0x00000003))
+  #error "APBC0_PSR: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RSVD((APBC1_PSR_Val),  ~0x00000083))
+  #error "APBC1_PSR: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RSVD((APBC2_PSR_Val),  ~0x00000083))
+  #error "APBC2_PSR: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RSVD((SWC_PSR_Val),    ~0x00000003))
+  #error "SWC_PSR: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RSVD((TTC_PSR_Val),    ~0x00000001))
+  #error "TTC_PSR: Invalid values of reserved bits!"
+#endif
+
+/******************************************************************************/
+/* Define clocks with checking settings                                       */
+/******************************************************************************/
+
+/**
+ ******************************************************************************
+ ** \brief Calculate PLL K factor from settings
+ ******************************************************************************/
+#define __PLLK         (((PLL_CTL1_Val >> 4) & 0x0F) + 1)
+
+/**
+ ******************************************************************************
+ ** \brief Calculate PLL N factor from settings
+ ******************************************************************************/
+#define __PLLN         (((PLL_CTL2_Val     ) & 0x3F) + 1)
+
+/**
+ ******************************************************************************
+ ** \brief Calculate PLL M factor from settings
+ ******************************************************************************/
+#define __PLLM         (((PLL_CTL1_Val     ) & 0x0F) + 1)
+
+/**
+ ******************************************************************************
+ ** \brief Calculate PLL output frequency from settings
+ ******************************************************************************/
+#define __PLLCLK       ((__CLKMO  * __PLLN) / __PLLK)
+
+/******************************************************************************/
+/* Determine core clock frequency according to settings                       */
+/******************************************************************************/
+
+/**
+ ******************************************************************************
+ ** \brief Define Master Clock from settings
+ ******************************************************************************/
+#if   (((SCM_CTL_Val >> 5) & 0x07) == 0)
+  #define __MASTERCLK     (__CLKHC)
+#elif (((SCM_CTL_Val >> 5) & 0x07) == 1)
+  #define __MASTERCLK     (__CLKMO)
+#elif (((SCM_CTL_Val >> 5) & 0x07) == 2)
+  #define __MASTERCLK     (__PLLCLK)
+#elif (((SCM_CTL_Val >> 5) & 0x07) == 4)
+  #define __MASTERCLK     (__CLKLC)
+#elif (((SCM_CTL_Val >> 5) & 0x07) == 5)
+  #define __MASTERCLK     (__CLKSO)
+#else
+  #define __MASTERCLK     (0UL)
+#endif
+
+/**
+ ******************************************************************************
+ ** \brief Define System Clock Frequency (Core Clock) from settings
+ ******************************************************************************/
+#if   ((BSC_PSR_Val & 0x07) == 0)
+  #define __HCLK         (__MASTERCLK / 1)
+#elif ((BSC_PSR_Val & 0x07) == 1)
+  #define __HCLK         (__MASTERCLK / 2)
+#elif ((BSC_PSR_Val & 0x07) == 2)
+  #define __HCLK         (__MASTERCLK / 3)
+#elif ((BSC_PSR_Val & 0x07) == 3)
+  #define __HCLK         (__MASTERCLK / 4)
+#elif ((BSC_PSR_Val & 0x07) == 4)
+  #define __HCLK         (__MASTERCLK / 6)
+#elif ((BSC_PSR_Val & 0x07) == 5)
+  #define __HCLK         (__MASTERCLK / 8)
+#elif ((BSC_PSR_Val & 0x07) == 6)
+  #define __HCLK         (__MASTERCLK /16)
+#else
+  #define __HCLK         (0UL)
+#endif
+
+/******************************************************************************/
+/* HCLK range check                                                           */
+/******************************************************************************/
+#if (CHECK_RANGE(__CLKMO, __CLKMOMIN, __CLKMOMAX) != 0)
+  #error "Main Oscillator Clock (CLKMO) out of range!"
+#endif   
+
+#if (CHECK_RANGE(__CLKSO, __CLKSOMIN, __CLKSOMAX) != 0)
+  #error "Sub Oscillator Clock (CLKMO) out of range!"
+#endif   
+
+#if (CHECK_RANGE((__CLKMO / __PLLK), __PLLCLKINMIN, __PLLCLKINMAX) != 0)
+  #error "PLL input frequency out of range!"
+#endif  
+
+#if (CHECK_RANGE(((__CLKMO * __PLLN * __PLLM) / __PLLK), __PLLCLKMIN, __PLLCLKMAX) != 0)
+  #error "PLL oscillation frequency out of range!"
+#endif  
+   
+#if (CHECK_RANGE(__HCLK, 0, __HCLKMAX) != 0)
+  #error "System Clock (HCLK) out of range!"
+#endif
+   
+/******************************************************************************/
+/* Global function prototypes ('extern', definition in C source)              */
+/******************************************************************************/
+
+extern uint32_t SystemCoreClock;          // System Clock Frequency (Core Clock)
+   
+extern void SystemInit (void);            // Initialize the system
+
+extern void SystemCoreClockUpdate (void); // Update SystemCoreClock variable
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __SYSTEM_MB9BF61X_H */

bsp/mb9bf618s/CMSIS/Include/arm_common_tables.h

@@ -0,0 +1,93 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2013 ARM Limited. All rights reserved.
+*
+* $Date:        17. January 2013
+* $Revision:    V1.4.1
+*
+* Project:      CMSIS DSP Library
+* Title:        arm_common_tables.h
+*
+* Description:  This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_COMMON_TABLES_H
+#define _ARM_COMMON_TABLES_H
+
+#include "arm_math.h"
+
+extern const uint16_t armBitRevTable[1024];
+extern const q15_t armRecipTableQ15[64];
+extern const q31_t armRecipTableQ31[64];
+extern const q31_t realCoefAQ31[1024];
+extern const q31_t realCoefBQ31[1024];
+extern const float32_t twiddleCoef_16[32];
+extern const float32_t twiddleCoef_32[64];
+extern const float32_t twiddleCoef_64[128];
+extern const float32_t twiddleCoef_128[256];
+extern const float32_t twiddleCoef_256[512];
+extern const float32_t twiddleCoef_512[1024];
+extern const float32_t twiddleCoef_1024[2048];
+extern const float32_t twiddleCoef_2048[4096];
+extern const float32_t twiddleCoef_4096[8192];
+#define twiddleCoef twiddleCoef_4096
+extern const q31_t twiddleCoefQ31[6144];
+extern const q15_t twiddleCoefQ15[6144];
+extern const float32_t twiddleCoef_rfft_32[32];
+extern const float32_t twiddleCoef_rfft_64[64];
+extern const float32_t twiddleCoef_rfft_128[128];
+extern const float32_t twiddleCoef_rfft_256[256];
+extern const float32_t twiddleCoef_rfft_512[512];
+extern const float32_t twiddleCoef_rfft_1024[1024];
+extern const float32_t twiddleCoef_rfft_2048[2048];
+extern const float32_t twiddleCoef_rfft_4096[4096];
+
+
+#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20  )
+#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48  )
+#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56  )
+#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 )
+#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 )
+#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 )
+#define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800)
+#define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808)
+#define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032)
+
+extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE__16_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE__32_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE__64_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE1024_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH];
+
+#endif /*  ARM_COMMON_TABLES_H */

bsp/mb9bf618s/CMSIS/Include/arm_const_structs.h

@@ -0,0 +1,85 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2013 ARM Limited. All rights reserved.
+*
+* $Date:        17. January 2013
+* $Revision:    V1.4.1
+*
+* Project:      CMSIS DSP Library
+* Title:        arm_const_structs.h
+*
+* Description:  This file has constant structs that are initialized for
+*               user convenience.  For example, some can be given as
+*               arguments to the arm_cfft_f32() function.
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_CONST_STRUCTS_H
+#define _ARM_CONST_STRUCTS_H
+
+#include "arm_math.h"
+#include "arm_common_tables.h"
+
+   const arm_cfft_instance_f32 arm_cfft_sR_f32_len16 = {
+      16, twiddleCoef_16, armBitRevIndexTable16, ARMBITREVINDEXTABLE__16_TABLE_LENGTH
+   };
+
+   const arm_cfft_instance_f32 arm_cfft_sR_f32_len32 = {
+      32, twiddleCoef_32, armBitRevIndexTable32, ARMBITREVINDEXTABLE__32_TABLE_LENGTH
+   };
+
+   const arm_cfft_instance_f32 arm_cfft_sR_f32_len64 = {
+      64, twiddleCoef_64, armBitRevIndexTable64, ARMBITREVINDEXTABLE__64_TABLE_LENGTH
+   };
+
+   const arm_cfft_instance_f32 arm_cfft_sR_f32_len128 = {
+      128, twiddleCoef_128, armBitRevIndexTable128, ARMBITREVINDEXTABLE_128_TABLE_LENGTH
+   };
+
+   const arm_cfft_instance_f32 arm_cfft_sR_f32_len256 = {
+      256, twiddleCoef_256, armBitRevIndexTable256, ARMBITREVINDEXTABLE_256_TABLE_LENGTH
+   };
+
+   const arm_cfft_instance_f32 arm_cfft_sR_f32_len512 = {
+      512, twiddleCoef_512, armBitRevIndexTable512, ARMBITREVINDEXTABLE_512_TABLE_LENGTH
+   };
+
+   const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024 = {
+      1024, twiddleCoef_1024, armBitRevIndexTable1024, ARMBITREVINDEXTABLE1024_TABLE_LENGTH
+   };
+
+   const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048 = {
+      2048, twiddleCoef_2048, armBitRevIndexTable2048, ARMBITREVINDEXTABLE2048_TABLE_LENGTH
+   };
+
+   const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096 = {
+      4096, twiddleCoef_4096, armBitRevIndexTable4096, ARMBITREVINDEXTABLE4096_TABLE_LENGTH
+   };
+
+#endif

bsp/mb9bf618s/CMSIS/Include/core_cm0.h

@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file     core_cm0.h
+ * @brief    CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version  V3.20
+ * @date     25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include  /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+  @{
+ */
+
+/*  CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN  (0x03)                                   /*!< [31:16] CMSIS HAL main version   */
+#define __CM0_CMSIS_VERSION_SUB   (0x20)                                   /*!< [15:0]  CMSIS HAL sub version    */
+#define __CM0_CMSIS_VERSION       ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+                                    __CM0_CMSIS_VERSION_SUB          )     /*!< CMSIS HAL version number         */
+
+#define __CORTEX_M                (0x00)                                   /*!< Cortex-M Core                    */
+
+
+#if   defined ( __CC_ARM )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler          */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler       */
+  #define __STATIC_INLINE  static __inline
+
+#elif defined ( __ICCARM__ )
+  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __GNUC__ )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TASKING__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler      */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED       0
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+#endif
+
+#include <stdint.h>                      /* standard types definitions                      */
+#include <core_cmInstr.h>                /* Core Instruction Access                         */
+#include <core_cmFunc.h>                 /* Core Function Access                            */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM0_REV
+    #define __CM0_REV               0x0000
+    #warning "__CM0_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions                 */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions                 */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions                */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions              */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+    \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_CORE  Status and Control Registers
+    \brief  Core Register type definitions.
+  @{
+ */
+
+/** \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+#if (__CORTEX_M != 0x04)
+    uint32_t _reserved0:27;              /*!< bit:  0..26  Reserved                           */
+#else
+    uint32_t _reserved0:16;              /*!< bit:  0..15  Reserved                           */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags        */
+    uint32_t _reserved1:7;               /*!< bit: 20..26  Reserved                           */
+#endif
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} APSR_Type;
+
+
+/** \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} IPSR_Type;
+
+
+/** \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+#if (__CORTEX_M != 0x04)
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved                           */
+#else
+    uint32_t _reserved0:7;               /*!< bit:  9..15  Reserved                           */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags        */
+    uint32_t _reserved1:4;               /*!< bit: 20..23  Reserved                           */
+#endif
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0)          */
+    uint32_t IT:2;                       /*!< bit: 25..26  saved IT state   (read 0)          */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} xPSR_Type;
+
+
+/** \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used                   */
+    uint32_t FPCA:1;                     /*!< bit:      2  FP extension active flag           */
+    uint32_t _reserved0:29;              /*!< bit:  3..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+    \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/** \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IO uint32_t ISER[1];                 /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register           */
+       uint32_t RESERVED0[31];
+  __IO uint32_t ICER[1];                 /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register          */
+       uint32_t RSERVED1[31];
+  __IO uint32_t ISPR[1];                 /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register           */
+       uint32_t RESERVED2[31];
+  __IO uint32_t ICPR[1];                 /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register         */
+       uint32_t RESERVED3[31];
+       uint32_t RESERVED4[64];
+  __IO uint32_t IP[8];                   /*!< Offset: 0x300 (R/W)  Interrupt Priority Register              */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCB     System Control Block (SCB)
+    \brief      Type definitions for the System Control Block Registers
+  @{
+ */
+
+/** \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __I  uint32_t CPUID;                   /*!< Offset: 0x000 (R/ )  CPUID Base Register                                   */
+  __IO uint32_t ICSR;                    /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register                  */
+       uint32_t RESERVED0;
+  __IO uint32_t AIRCR;                   /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register      */
+  __IO uint32_t SCR;                     /*!< Offset: 0x010 (R/W)  System Control Register                               */
+  __IO uint32_t CCR;                     /*!< Offset: 0x014 (R/W)  Configuration Control Register                        */
+       uint32_t RESERVED1;
+  __IO uint32_t SHP[2];                  /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED   */
+  __IO uint32_t SHCSR;                   /*!< Offset: 0x024 (R/W)  System Handler Control and State Register             */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24                                             /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20                                             /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16                                             /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4                                             /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0                                             /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL << SCB_CPUID_REVISION_Pos)              /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31                                             /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28                                             /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27                                             /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26                                             /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25                                             /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23                                             /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22                                             /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12                                             /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0                                             /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos)           /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16                                             /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16                                             /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15                                             /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2                                             /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1                                             /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4                                             /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2                                             /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1                                             /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9                                             /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3                                             /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15                                             /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+    \brief      Type definitions for the System Timer Registers.
+  @{
+ */
+
+/** \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IO uint32_t LOAD;                    /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register       */
+  __IO uint32_t VAL;                     /*!< Offset: 0x008 (R/W)  SysTick Current Value Register      */
+  __I  uint32_t CALIB;                   /*!< Offset: 0x00C (R/ )  SysTick Calibration Register        */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16                                             /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2                                             /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1                                             /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0                                             /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL << SysTick_CTRL_ENABLE_Pos)               /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0                                             /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos)        /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0                                             /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos)        /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31                                             /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30                                             /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0                                             /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos)        /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+    \brief      Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+                are only accessible over DAP and not via processor. Therefore
+                they are not covered by the Cortex-M0 header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_core_base     Core Definitions
+    \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address              */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address                 */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct           */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct       */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct          */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+    \brief      Functions that manage interrupts and exceptions via the NVIC.
+    @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M                   */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  (((uint32_t)(IRQn)       )    &  0x03) * 8 )
+#define _SHP_IDX(IRQn)           ( ((((uint32_t)(IRQn) & 0x0F)-8) >>    2)     )
+#define _IP_IDX(IRQn)            (   ((uint32_t)(IRQn)            >>    2)     )
+
+
+/** \brief  Enable External Interrupt
+
+    The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief  Disable External Interrupt
+
+    The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief  Get Pending Interrupt
+
+    The function reads the pending register in the NVIC and returns the pending bit
+    for the specified interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+
+    \return             0  Interrupt status is not pending.
+    \return             1  Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief  Set Pending Interrupt
+
+    The function sets the pending bit of an external interrupt.
+
+    \param [in]      IRQn  Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief  Clear Pending Interrupt
+
+    The function clears the pending bit of an external interrupt.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief  Set Interrupt Priority
+
+    The function sets the priority of an interrupt.
+
+    \note The priority cannot be set for every core interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+    \param [in]  priority  Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if(IRQn < 0) {
+    SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+        (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+  else {
+    NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+        (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief  Get Interrupt Priority
+
+    The function reads the priority of an interrupt. The interrupt
+    number can be positive to specify an external (device specific)
+    interrupt, or negative to specify an internal (core) interrupt.
+
+
+    \param [in]   IRQn  Interrupt number.
+    \return             Interrupt Priority. Value is aligned automatically to the implemented
+                        priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if(IRQn < 0) {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS)));  } /* get priority for Cortex-M0 system interrupts */
+  else {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS)));  } /* get priority for device specific interrupts  */
+}
+
+
+/** \brief  System Reset
+
+    The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+  __DSB();                                                     /* Ensure all outstanding memory accesses included
+                                                                  buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FA << SCB_AIRCR_VECTKEY_Pos)      |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                     /* Ensure completion of memory access */
+  while(1);                                                    /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+    \brief      Functions that configure the System.
+  @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief  System Tick Configuration
+
+    The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+    Counter is in free running mode to generate periodic interrupts.
+
+    \param [in]  ticks  Number of ticks between two interrupts.
+
+    \return          0  Function succeeded.
+    \return          1  Function failed.
+
+    \note     When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+    function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+    must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk)  return (1);      /* Reload value impossible */
+
+  SysTick->LOAD  = ticks - 1;                                  /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1);  /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0;                                          /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                    /* Enable SysTick IRQ and SysTick Timer */
+  return (0);                                                  /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif

bsp/mb9bf618s/CMSIS/Include/core_cm0plus.h

@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file     core_cm0plus.h
+ * @brief    CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version  V3.20
+ * @date     25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include  /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+  @{
+ */
+
+/*  CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03)                                /*!< [31:16] CMSIS HAL main version   */
+#define __CM0PLUS_CMSIS_VERSION_SUB  (0x20)                                /*!< [15:0]  CMSIS HAL sub version    */
+#define __CM0PLUS_CMSIS_VERSION      ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+                                       __CM0PLUS_CMSIS_VERSION_SUB)        /*!< CMSIS HAL version number         */
+
+#define __CORTEX_M                (0x00)                                   /*!< Cortex-M Core                    */
+
+
+#if   defined ( __CC_ARM )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler          */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler       */
+  #define __STATIC_INLINE  static __inline
+
+#elif defined ( __ICCARM__ )
+  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __GNUC__ )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TASKING__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler      */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED       0
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+#endif
+
+#include <stdint.h>                      /* standard types definitions                      */
+#include <core_cmInstr.h>                /* Core Instruction Access                         */
+#include <core_cmFunc.h>                 /* Core Function Access                            */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM0PLUS_REV
+    #define __CM0PLUS_REV             0x0000
+    #warning "__CM0PLUS_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __VTOR_PRESENT
+    #define __VTOR_PRESENT            0
+    #warning "__VTOR_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions                 */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions                 */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions                */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions              */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+    \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_CORE  Status and Control Registers
+    \brief  Core Register type definitions.
+  @{
+ */
+
+/** \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+#if (__CORTEX_M != 0x04)
+    uint32_t _reserved0:27;              /*!< bit:  0..26  Reserved                           */
+#else
+    uint32_t _reserved0:16;              /*!< bit:  0..15  Reserved                           */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags        */
+    uint32_t _reserved1:7;               /*!< bit: 20..26  Reserved                           */
+#endif
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} APSR_Type;
+
+
+/** \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} IPSR_Type;
+
+
+/** \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+#if (__CORTEX_M != 0x04)
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved                           */
+#else
+    uint32_t _reserved0:7;               /*!< bit:  9..15  Reserved                           */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags        */
+    uint32_t _reserved1:4;               /*!< bit: 20..23  Reserved                           */
+#endif
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0)          */
+    uint32_t IT:2;                       /*!< bit: 25..26  saved IT state   (read 0)          */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} xPSR_Type;
+
+
+/** \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used                   */
+    uint32_t FPCA:1;                     /*!< bit:      2  FP extension active flag           */
+    uint32_t _reserved0:29;              /*!< bit:  3..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+    \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/** \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IO uint32_t ISER[1];                 /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register           */
+       uint32_t RESERVED0[31];
+  __IO uint32_t ICER[1];                 /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register          */
+       uint32_t RSERVED1[31];
+  __IO uint32_t ISPR[1];                 /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register           */
+       uint32_t RESERVED2[31];
+  __IO uint32_t ICPR[1];                 /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register         */
+       uint32_t RESERVED3[31];
+       uint32_t RESERVED4[64];
+  __IO uint32_t IP[8];                   /*!< Offset: 0x300 (R/W)  Interrupt Priority Register              */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCB     System Control Block (SCB)
+    \brief      Type definitions for the System Control Block Registers
+  @{
+ */
+
+/** \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __I  uint32_t CPUID;                   /*!< Offset: 0x000 (R/ )  CPUID Base Register                                   */
+  __IO uint32_t ICSR;                    /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register                  */
+#if (__VTOR_PRESENT == 1)
+  __IO uint32_t VTOR;                    /*!< Offset: 0x008 (R/W)  Vector Table Offset Register                          */
+#else
+       uint32_t RESERVED0;
+#endif
+  __IO uint32_t AIRCR;                   /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register      */
+  __IO uint32_t SCR;                     /*!< Offset: 0x010 (R/W)  System Control Register                               */
+  __IO uint32_t CCR;                     /*!< Offset: 0x014 (R/W)  Configuration Control Register                        */
+       uint32_t RESERVED1;
+  __IO uint32_t SHP[2];                  /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED   */
+  __IO uint32_t SHCSR;                   /*!< Offset: 0x024 (R/W)  System Handler Control and State Register             */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24                                             /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20                                             /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16                                             /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4                                             /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0                                             /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL << SCB_CPUID_REVISION_Pos)              /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31                                             /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28                                             /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27                                             /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26                                             /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25                                             /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23                                             /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22                                             /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12                                             /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0                                             /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos)           /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 8                                             /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos)            /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16                                             /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16                                             /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15                                             /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2                                             /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1                                             /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4                                             /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2                                             /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1                                             /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9                                             /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3                                             /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15                                             /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+    \brief      Type definitions for the System Timer Registers.
+  @{
+ */
+
+/** \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IO uint32_t LOAD;                    /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register       */
+  __IO uint32_t VAL;                     /*!< Offset: 0x008 (R/W)  SysTick Current Value Register      */
+  __I  uint32_t CALIB;                   /*!< Offset: 0x00C (R/ )  SysTick Calibration Register        */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16                                             /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2                                             /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1                                             /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0                                             /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL << SysTick_CTRL_ENABLE_Pos)               /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0                                             /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos)        /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0                                             /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos)        /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31                                             /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30                                             /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0                                             /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos)        /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+    \brief      Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/** \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __I  uint32_t TYPE;                    /*!< Offset: 0x000 (R/ )  MPU Type Register                              */
+  __IO uint32_t CTRL;                    /*!< Offset: 0x004 (R/W)  MPU Control Register                           */
+  __IO uint32_t RNR;                     /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register                     */
+  __IO uint32_t RBAR;                    /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register               */
+  __IO uint32_t RASR;                    /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register         */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos               16                                             /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8                                             /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0                                             /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL << MPU_TYPE_SEPARATE_Pos)                 /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos             2                                             /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1                                             /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0                                             /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL << MPU_CTRL_ENABLE_Pos)                   /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos                  0                                             /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL << MPU_RNR_REGION_Pos)                 /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos                   8                                             /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0xFFFFFFUL << MPU_RBAR_ADDR_Pos)              /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4                                             /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0                                             /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL << MPU_RBAR_REGION_Pos)                 /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos                 16                                             /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28                                             /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24                                             /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19                                             /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18                                             /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17                                             /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16                                             /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8                                             /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1                                             /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0                                             /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL << MPU_RASR_ENABLE_Pos)                   /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+    \brief      Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+                are only accessible over DAP and not via processor. Therefore
+                they are not covered by the Cortex-M0 header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_core_base     Core Definitions
+    \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address              */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address                 */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct           */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct       */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct          */
+
+#if (__MPU_PRESENT == 1)
+  #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit             */
+  #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit             */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+    \brief      Functions that manage interrupts and exceptions via the NVIC.
+    @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M                   */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  (((uint32_t)(IRQn)       )    &  0x03) * 8 )
+#define _SHP_IDX(IRQn)           ( ((((uint32_t)(IRQn) & 0x0F)-8) >>    2)     )
+#define _IP_IDX(IRQn)            (   ((uint32_t)(IRQn)            >>    2)     )
+
+
+/** \brief  Enable External Interrupt
+
+    The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief  Disable External Interrupt
+
+    The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief  Get Pending Interrupt
+
+    The function reads the pending register in the NVIC and returns the pending bit
+    for the specified interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+
+    \return             0  Interrupt status is not pending.
+    \return             1  Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief  Set Pending Interrupt
+
+    The function sets the pending bit of an external interrupt.
+
+    \param [in]      IRQn  Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief  Clear Pending Interrupt
+
+    The function clears the pending bit of an external interrupt.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief  Set Interrupt Priority
+
+    The function sets the priority of an interrupt.
+
+    \note The priority cannot be set for every core interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+    \param [in]  priority  Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if(IRQn < 0) {
+    SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+        (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+  else {
+    NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+        (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief  Get Interrupt Priority
+
+    The function reads the priority of an interrupt. The interrupt
+    number can be positive to specify an external (device specific)
+    interrupt, or negative to specify an internal (core) interrupt.
+
+
+    \param [in]   IRQn  Interrupt number.
+    \return             Interrupt Priority. Value is aligned automatically to the implemented
+                        priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if(IRQn < 0) {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS)));  } /* get priority for Cortex-M0 system interrupts */
+  else {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS)));  } /* get priority for device specific interrupts  */
+}
+
+
+/** \brief  System Reset
+
+    The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+  __DSB();                                                     /* Ensure all outstanding memory accesses included
+                                                                  buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FA << SCB_AIRCR_VECTKEY_Pos)      |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                     /* Ensure completion of memory access */
+  while(1);                                                    /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+    \brief      Functions that configure the System.
+  @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief  System Tick Configuration
+
+    The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+    Counter is in free running mode to generate periodic interrupts.
+
+    \param [in]  ticks  Number of ticks between two interrupts.
+
+    \return          0  Function succeeded.
+    \return          1  Function failed.
+
+    \note     When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+    function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+    must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk)  return (1);      /* Reload value impossible */
+
+  SysTick->LOAD  = ticks - 1;                                  /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1);  /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0;                                          /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                    /* Enable SysTick IRQ and SysTick Timer */
+  return (0);                                                  /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif

bsp/mb9bf618s/CMSIS/Include/core_cm4_simd.h

@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file     core_cm4_simd.h
+ * @brief    CMSIS Cortex-M4 SIMD Header File
+ * @version  V3.20
+ * @date     25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ###################  Compiler specific Intrinsics  ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+  Access to dedicated SIMD instructions
+  @{
+*/
+
+#if   defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8                           __sadd8
+#define __QADD8                           __qadd8
+#define __SHADD8                          __shadd8
+#define __UADD8                           __uadd8
+#define __UQADD8                          __uqadd8
+#define __UHADD8                          __uhadd8
+#define __SSUB8                           __ssub8
+#define __QSUB8                           __qsub8
+#define __SHSUB8                          __shsub8
+#define __USUB8                           __usub8
+#define __UQSUB8                          __uqsub8
+#define __UHSUB8                          __uhsub8
+#define __SADD16                          __sadd16
+#define __QADD16                          __qadd16
+#define __SHADD16                         __shadd16
+#define __UADD16                          __uadd16
+#define __UQADD16                         __uqadd16
+#define __UHADD16                         __uhadd16
+#define __SSUB16                          __ssub16
+#define __QSUB16                          __qsub16
+#define __SHSUB16                         __shsub16
+#define __USUB16                          __usub16
+#define __UQSUB16                         __uqsub16
+#define __UHSUB16                         __uhsub16
+#define __SASX                            __sasx
+#define __QASX                            __qasx
+#define __SHASX                           __shasx
+#define __UASX                            __uasx
+#define __UQASX                           __uqasx
+#define __UHASX                           __uhasx
+#define __SSAX                            __ssax
+#define __QSAX                            __qsax
+#define __SHSAX                           __shsax
+#define __USAX                            __usax
+#define __UQSAX                           __uqsax
+#define __UHSAX                           __uhsax
+#define __USAD8                           __usad8
+#define __USADA8                          __usada8
+#define __SSAT16                          __ssat16
+#define __USAT16                          __usat16
+#define __UXTB16                          __uxtb16
+#define __UXTAB16                         __uxtab16
+#define __SXTB16                          __sxtb16
+#define __SXTAB16                         __sxtab16
+#define __SMUAD                           __smuad
+#define __SMUADX                          __smuadx
+#define __SMLAD                           __smlad
+#define __SMLADX                          __smladx
+#define __SMLALD                          __smlald
+#define __SMLALDX                         __smlaldx
+#define __SMUSD                           __smusd
+#define __SMUSDX                          __smusdx
+#define __SMLSD                           __smlsd
+#define __SMLSDX                          __smlsdx
+#define __SMLSLD                          __smlsld
+#define __SMLSLDX                         __smlsldx
+#define __SEL                             __sel
+#define __QADD                            __qadd
+#define __QSUB                            __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0x0000FFFFUL) |  \
+                                           ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL)  )
+
+#define __PKHTB(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0xFFFF0000UL) |  \
+                                           ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL)  )
+
+#define __SMMLA(ARG1,ARG2,ARG3)          ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+                                                      ((int64_t)(ARG3) << 32)      ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("usat16 %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+  uint32_t result;
+
+  __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+  uint32_t result;
+
+  __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+  uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+  __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+  (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+  uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+  __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+  (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+  uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+  __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+  (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+  uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+  __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+  (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+  __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2), "I" (ARG3)  ); \
+  __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+  if (ARG3 == 0) \
+    __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2)  ); \
+  else \
+    __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2), "I" (ARG3)  ); \
+  __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r"  (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif

bsp/mb9bf618s/CMSIS/Include/core_cmFunc.h

@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file     core_cmFunc.h
+ * @brief    CMSIS Cortex-M Core Function Access Header File
+ * @version  V3.20
+ * @date     25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ###########################  Core Function Access  ########################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+  @{
+ */
+
+#if   defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+  #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq();     */
+/* intrinsic void __disable_irq();    */
+
+/** \brief  Get Control Register
+
+    This function returns the content of the Control Register.
+
+    \return               Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+  register uint32_t __regControl         __ASM("control");
+  return(__regControl);
+}
+
+
+/** \brief  Set Control Register
+
+    This function writes the given value to the Control Register.
+
+    \param [in]    control  Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+  register uint32_t __regControl         __ASM("control");
+  __regControl = control;
+}
+
+
+/** \brief  Get IPSR Register
+
+    This function returns the content of the IPSR Register.
+
+    \return               IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+  register uint32_t __regIPSR          __ASM("ipsr");
+  return(__regIPSR);
+}
+
+
+/** \brief  Get APSR Register
+
+    This function returns the content of the APSR Register.
+
+    \return               APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+  register uint32_t __regAPSR          __ASM("apsr");
+  return(__regAPSR);
+}
+
+
+/** \brief  Get xPSR Register
+
+    This function returns the content of the xPSR Register.
+
+    \return               xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+  register uint32_t __regXPSR          __ASM("xpsr");
+  return(__regXPSR);
+}
+
+
+/** \brief  Get Process Stack Pointer
+
+    This function returns the current value of the Process Stack Pointer (PSP).
+
+    \return               PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+  register uint32_t __regProcessStackPointer  __ASM("psp");
+  return(__regProcessStackPointer);
+}
+
+
+/** \brief  Set Process Stack Pointer
+
+    This function assigns the given value to the Process Stack Pointer (PSP).
+
+    \param [in]    topOfProcStack  Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+  register uint32_t __regProcessStackPointer  __ASM("psp");
+  __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief  Get Main Stack Pointer
+
+    This function returns the current value of the Main Stack Pointer (MSP).
+
+    \return               MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+  register uint32_t __regMainStackPointer     __ASM("msp");
+  return(__regMainStackPointer);
+}
+
+
+/** \brief  Set Main Stack Pointer
+
+    This function assigns the given value to the Main Stack Pointer (MSP).
+
+    \param [in]    topOfMainStack  Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+  register uint32_t __regMainStackPointer     __ASM("msp");
+  __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief  Get Priority Mask
+
+    This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+    \return               Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  return(__regPriMask);
+}
+
+
+/** \brief  Set Priority Mask
+
+    This function assigns the given value to the Priority Mask Register.
+
+    \param [in]    priMask  Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  __regPriMask = (priMask);
+}
+
+
+#if       (__CORTEX_M >= 0x03)
+
+/** \brief  Enable FIQ
+
+    This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq                __enable_fiq
+
+
+/** \brief  Disable FIQ
+
+    This function disables FIQ interrupts by setting the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq               __disable_fiq
+
+
+/** \brief  Get Base Priority
+
+    This function returns the current value of the Base Priority register.
+
+    \return               Base Priority register value
+ */
+__STATIC_INLINE uint32_t  __get_BASEPRI(void)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  return(__regBasePri);
+}
+
+
+/** \brief  Set Base Priority
+
+    This function assigns the given value to the Base Priority register.
+
+    \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief  Get Fault Mask
+
+    This function returns the current value of the Fault Mask register.
+
+    \return               Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  return(__regFaultMask);
+}
+
+
+/** \brief  Set Fault Mask
+
+    This function assigns the given value to the Fault Mask register.
+
+    \param [in]    faultMask  Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if       (__CORTEX_M == 0x04)
+
+/** \brief  Get FPSCR
+
+    This function returns the current value of the Floating Point Status/Control register.
+
+    \return               Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  register uint32_t __regfpscr         __ASM("fpscr");
+  return(__regfpscr);
+#else
+   return(0);
+#endif
+}
+
+
+/** \brief  Set FPSCR
+
+    This function assigns the given value to the Floating Point Status/Control register.
+
+    \param [in]    fpscr  Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  register uint32_t __regfpscr         __ASM("fpscr");
+  __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief  Enable IRQ Interrupts
+
+  This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+  Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+  __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief  Disable IRQ Interrupts
+
+  This function disables IRQ interrupts by setting the I-bit in the CPSR.
+  Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+  __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief  Get Control Register
+
+    This function returns the content of the Control Register.
+
+    \return               Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, control" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Control Register
+
+    This function writes the given value to the Control Register.
+
+    \param [in]    control  Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+  __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief  Get IPSR Register
+
+    This function returns the content of the IPSR Register.
+
+    \return               IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Get APSR Register
+
+    This function returns the content of the APSR Register.
+
+    \return               APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Get xPSR Register
+
+    This function returns the content of the xPSR Register.
+
+    \return               xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Get Process Stack Pointer
+
+    This function returns the current value of the Process Stack Pointer (PSP).
+
+    \return               PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+  register uint32_t result;
+
+  __ASM volatile ("MRS %0, psp\n"  : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Process Stack Pointer
+
+    This function assigns the given value to the Process Stack Pointer (PSP).
+
+    \param [in]    topOfProcStack  Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+  __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief  Get Main Stack Pointer
+
+    This function returns the current value of the Main Stack Pointer (MSP).
+
+    \return               MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+  register uint32_t result;
+
+  __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Main Stack Pointer
+
+    This function assigns the given value to the Main Stack Pointer (MSP).
+
+    \param [in]    topOfMainStack  Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+  __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief  Get Priority Mask
+
+    This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+    \return               Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, primask" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Priority Mask
+
+    This function assigns the given value to the Priority Mask Register.
+
+    \param [in]    priMask  Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+  __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if       (__CORTEX_M >= 0x03)
+
+/** \brief  Enable FIQ
+
+    This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+  __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief  Disable FIQ
+
+    This function disables FIQ interrupts by setting the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+  __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief  Get Base Priority
+
+    This function returns the current value of the Base Priority register.
+
+    \return               Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Base Priority
+
+    This function assigns the given value to the Base Priority register.
+
+    \param [in]    basePri  Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+  __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief  Get Fault Mask
+
+    This function returns the current value of the Fault Mask register.
+
+    \return               Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Fault Mask
+
+    This function assigns the given value to the Fault Mask register.
+
+    \param [in]    faultMask  Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+  __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if       (__CORTEX_M == 0x04)
+
+/** \brief  Get FPSCR
+
+    This function returns the current value of the Floating Point Status/Control register.
+
+    \return               Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  uint32_t result;
+
+  /* Empty asm statement works as a scheduling barrier */
+  __ASM volatile ("");
+  __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+  __ASM volatile ("");
+  return(result);
+#else
+   return(0);
+#endif
+}
+
+
+/** \brief  Set FPSCR
+
+    This function assigns the given value to the Floating Point Status/Control register.
+
+    \param [in]    fpscr  Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  /* Empty asm statement works as a scheduling barrier */
+  __ASM volatile ("");
+  __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+  __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */

bsp/mb9bf618s/CMSIS/Include/core_cmInstr.h

@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file     core_cmInstr.h
+ * @brief    CMSIS Cortex-M Core Instruction Access Header File
+ * @version  V3.20
+ * @date     05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ##########################  Core Instruction Access  ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+  Access to dedicated instructions
+  @{
+*/
+
+#if   defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+  #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief  No Operation
+
+    No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP                             __nop
+
+
+/** \brief  Wait For Interrupt
+
+    Wait For Interrupt is a hint instruction that suspends execution
+    until one of a number of events occurs.
+ */
+#define __WFI                             __wfi
+
+
+/** \brief  Wait For Event
+
+    Wait For Event is a hint instruction that permits the processor to enter
+    a low-power state until one of a number of events occurs.
+ */
+#define __WFE                             __wfe
+
+
+/** \brief  Send Event
+
+    Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV                             __sev
+
+
+/** \brief  Instruction Synchronization Barrier
+
+    Instruction Synchronization Barrier flushes the pipeline in the processor,
+    so that all instructions following the ISB are fetched from cache or
+    memory, after the instruction has been completed.
+ */
+#define __ISB()                           __isb(0xF)
+
+
+/** \brief  Data Synchronization Barrier
+
+    This function acts as a special kind of Data Memory Barrier.
+    It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB()                           __dsb(0xF)
+
+
+/** \brief  Data Memory Barrier
+
+    This function ensures the apparent order of the explicit memory operations before
+    and after the instruction, without ensuring their completion.
+ */
+#define __DMB()                           __dmb(0xF)
+
+
+/** \brief  Reverse byte order (32 bit)
+
+    This function reverses the byte order in integer value.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+#define __REV                             __rev
+
+
+/** \brief  Reverse byte order (16 bit)
+
+    This function reverses the byte order in two unsigned short values.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+  rev16 r0, r0
+  bx lr
+}
+#endif
+
+/** \brief  Reverse byte order in signed short value
+
+    This function reverses the byte order in a signed short value with sign extension to integer.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+  revsh r0, r0
+  bx lr
+}
+#endif
+
+
+/** \brief  Rotate Right in unsigned value (32 bit)
+
+    This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+    \param [in]    value  Value to rotate
+    \param [in]    value  Number of Bits to rotate
+    \return               Rotated value
+ */
+#define __ROR                             __ror
+
+
+/** \brief  Breakpoint
+
+    This function causes the processor to enter Debug state.
+    Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+    \param [in]    value  is ignored by the processor.
+                   If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value)                       __breakpoint(value)
+
+
+#if       (__CORTEX_M >= 0x03)
+
+/** \brief  Reverse bit order of value
+
+    This function reverses the bit order of the given value.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+#define __RBIT                            __rbit
+
+
+/** \brief  LDR Exclusive (8 bit)
+
+    This function performs a exclusive LDR command for 8 bit value.
+
+    \param [in]    ptr  Pointer to data
+    \return             value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr)                     ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief  LDR Exclusive (16 bit)
+
+    This function performs a exclusive LDR command for 16 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr)                     ((uint16_t) __ldrex(ptr))
+
+
+/** \brief  LDR Exclusive (32 bit)
+
+    This function performs a exclusive LDR command for 32 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr)                     ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief  STR Exclusive (8 bit)
+
+    This function performs a exclusive STR command for 8 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+#define __STREXB(value, ptr)              __strex(value, ptr)
+
+
+/** \brief  STR Exclusive (16 bit)
+
+    This function performs a exclusive STR command for 16 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+#define __STREXH(value, ptr)              __strex(value, ptr)
+
+
+/** \brief  STR Exclusive (32 bit)
+
+    This function performs a exclusive STR command for 32 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+#define __STREXW(value, ptr)              __strex(value, ptr)
+
+
+/** \brief  Remove the exclusive lock
+
+    This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX                           __clrex
+
+
+/** \brief  Signed Saturate
+
+    This function saturates a signed value.
+
+    \param [in]  value  Value to be saturated
+    \param [in]    sat  Bit position to saturate to (1..32)
+    \return             Saturated value
+ */
+#define __SSAT                            __ssat
+
+
+/** \brief  Unsigned Saturate
+
+    This function saturates an unsigned value.
+
+    \param [in]  value  Value to be saturated
+    \param [in]    sat  Bit position to saturate to (0..31)
+    \return             Saturated value
+ */
+#define __USAT                            __usat
+
+
+/** \brief  Count leading zeros
+
+    This function counts the number of leading zeros of a data value.
+
+    \param [in]  value  Value to count the leading zeros
+    \return             number of leading zeros in value
+ */
+#define __CLZ                             __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief  No Operation
+
+    No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+  __ASM volatile ("nop");
+}
+
+
+/** \brief  Wait For Interrupt
+
+    Wait For Interrupt is a hint instruction that suspends execution
+    until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+  __ASM volatile ("wfi");
+}
+
+
+/** \brief  Wait For Event
+
+    Wait For Event is a hint instruction that permits the processor to enter
+    a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+  __ASM volatile ("wfe");
+}
+
+
+/** \brief  Send Event
+
+    Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+  __ASM volatile ("sev");
+}
+
+
+/** \brief  Instruction Synchronization Barrier
+
+    Instruction Synchronization Barrier flushes the pipeline in the processor,
+    so that all instructions following the ISB are fetched from cache or
+    memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+  __ASM volatile ("isb");
+}
+
+
+/** \brief  Data Synchronization Barrier
+
+    This function acts as a special kind of Data Memory Barrier.
+    It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+  __ASM volatile ("dsb");
+}
+
+
+/** \brief  Data Memory Barrier
+
+    This function ensures the apparent order of the explicit memory operations before
+    and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+  __ASM volatile ("dmb");
+}
+
+
+/** \brief  Reverse byte order (32 bit)
+
+    This function reverses the byte order in integer value.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+  return __builtin_bswap32(value);
+#else
+  uint32_t result;
+
+  __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return(result);
+#endif
+}
+
+
+/** \brief  Reverse byte order (16 bit)
+
+    This function reverses the byte order in two unsigned short values.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+  uint32_t result;
+
+  __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return(result);
+}
+
+
+/** \brief  Reverse byte order in signed short value
+
+    This function reverses the byte order in a signed short value with sign extension to integer.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+  return (short)__builtin_bswap16(value);
+#else
+  uint32_t result;
+
+  __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return(result);
+#endif
+}
+
+
+/** \brief  Rotate Right in unsigned value (32 bit)
+
+    This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+    \param [in]    value  Value to rotate
+    \param [in]    value  Number of Bits to rotate
+    \return               Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+  return (op1 >> op2) | (op1 << (32 - op2)); 
+}
+
+
+/** \brief  Breakpoint
+
+    This function causes the processor to enter Debug state.
+    Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+    \param [in]    value  is ignored by the processor.
+                   If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value)                       __ASM volatile ("bkpt "#value)
+
+
+#if       (__CORTEX_M >= 0x03)
+
+/** \brief  Reverse bit order of value
+
+    This function reverses the bit order of the given value.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+  uint32_t result;
+
+   __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+   return(result);
+}
+
+
+/** \brief  LDR Exclusive (8 bit)
+
+    This function performs a exclusive LDR command for 8 bit value.
+
+    \param [in]    ptr  Pointer to data
+    \return             value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+    uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+   __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+    /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+       accepted by assembler. So has to use following less efficient pattern.
+    */
+   __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+   return(result);
+}
+
+
+/** \brief  LDR Exclusive (16 bit)
+
+    This function performs a exclusive LDR command for 16 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+    uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+   __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+    /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+       accepted by assembler. So has to use following less efficient pattern.
+    */
+   __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+   return(result);
+}
+
+
+/** \brief  LDR Exclusive (32 bit)
+
+    This function performs a exclusive LDR command for 32 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+    uint32_t result;
+
+   __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+   return(result);
+}
+
+
+/** \brief  STR Exclusive (8 bit)
+
+    This function performs a exclusive STR command for 8 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+   uint32_t result;
+
+   __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+   return(result);
+}
+
+
+/** \brief  STR Exclusive (16 bit)
+
+    This function performs a exclusive STR command for 16 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+   uint32_t result;
+
+   __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+   return(result);
+}
+
+
+/** \brief  STR Exclusive (32 bit)
+
+    This function performs a exclusive STR command for 32 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+   uint32_t result;
+
+   __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+   return(result);
+}
+
+
+/** \brief  Remove the exclusive lock
+
+    This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+  __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief  Signed Saturate
+
+    This function saturates a signed value.
+
+    \param [in]  value  Value to be saturated
+    \param [in]    sat  Bit position to saturate to (1..32)
+    \return             Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("ssat %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+
+/** \brief  Unsigned Saturate
+
+    This function saturates an unsigned value.
+
+    \param [in]  value  Value to be saturated
+    \param [in]    sat  Bit position to saturate to (0..31)
+    \return             Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("usat %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+
+/** \brief  Count leading zeros
+
+    This function counts the number of leading zeros of a data value.
+
+    \param [in]  value  Value to count the leading zeros
+    \return             number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+   uint32_t result;
+
+  __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+  return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */

bsp/mb9bf618s/CMSIS/Include/core_sc000.h

@@ -0,0 +1,813 @@
+/**************************************************************************//**
+ * @file     core_sc000.h
+ * @brief    CMSIS SC000 Core Peripheral Access Layer Header File
+ * @version  V3.20
+ * @date     25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include  /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_SC000_H_GENERIC
+#define __CORE_SC000_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/** \ingroup SC000
+  @{
+ */
+
+/*  CMSIS SC000 definitions */
+#define __SC000_CMSIS_VERSION_MAIN  (0x03)                                   /*!< [31:16] CMSIS HAL main version */
+#define __SC000_CMSIS_VERSION_SUB   (0x20)                                   /*!< [15:0]  CMSIS HAL sub version  */
+#define __SC000_CMSIS_VERSION       ((__SC000_CMSIS_VERSION_MAIN << 16) | \
+                                      __SC000_CMSIS_VERSION_SUB          )   /*!< CMSIS HAL version number       */
+
+#define __CORTEX_SC                (0)                                       /*!< Cortex secure core             */
+
+
+#if   defined ( __CC_ARM )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler          */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler       */
+  #define __STATIC_INLINE  static __inline
+
+#elif defined ( __ICCARM__ )
+  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __GNUC__ )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TASKING__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler      */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED       0
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+#endif
+
+#include <stdint.h>                      /* standard types definitions                      */
+#include <core_cmInstr.h>                /* Core Instruction Access                         */
+#include <core_cmFunc.h>                 /* Core Function Access                            */
+
+#endif /* __CORE_SC000_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC000_H_DEPENDANT
+#define __CORE_SC000_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __SC000_REV
+    #define __SC000_REV             0x0000
+    #warning "__SC000_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions                 */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions                 */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions                */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions              */
+
+/*@} end of group SC000 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+    \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_CORE  Status and Control Registers
+    \brief  Core Register type definitions.
+  @{
+ */
+
+/** \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+#if (__CORTEX_M != 0x04)
+    uint32_t _reserved0:27;              /*!< bit:  0..26  Reserved                           */
+#else
+    uint32_t _reserved0:16;              /*!< bit:  0..15  Reserved                           */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags        */
+    uint32_t _reserved1:7;               /*!< bit: 20..26  Reserved                           */
+#endif
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} APSR_Type;
+
+
+/** \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} IPSR_Type;
+
+
+/** \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+#if (__CORTEX_M != 0x04)
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved                           */
+#else
+    uint32_t _reserved0:7;               /*!< bit:  9..15  Reserved                           */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags        */
+    uint32_t _reserved1:4;               /*!< bit: 20..23  Reserved                           */
+#endif
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0)          */
+    uint32_t IT:2;                       /*!< bit: 25..26  saved IT state   (read 0)          */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} xPSR_Type;
+
+
+/** \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used                   */
+    uint32_t FPCA:1;                     /*!< bit:      2  FP extension active flag           */
+    uint32_t _reserved0:29;              /*!< bit:  3..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+    \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/** \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IO uint32_t ISER[1];                 /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register           */
+       uint32_t RESERVED0[31];
+  __IO uint32_t ICER[1];                 /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register          */
+       uint32_t RSERVED1[31];
+  __IO uint32_t ISPR[1];                 /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register           */
+       uint32_t RESERVED2[31];
+  __IO uint32_t ICPR[1];                 /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register         */
+       uint32_t RESERVED3[31];
+       uint32_t RESERVED4[64];
+  __IO uint32_t IP[8];                   /*!< Offset: 0x300 (R/W)  Interrupt Priority Register              */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCB     System Control Block (SCB)
+    \brief      Type definitions for the System Control Block Registers
+  @{
+ */
+
+/** \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __I  uint32_t CPUID;                   /*!< Offset: 0x000 (R/ )  CPUID Base Register                                   */
+  __IO uint32_t ICSR;                    /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register                  */
+  __IO uint32_t VTOR;                    /*!< Offset: 0x008 (R/W)  Vector Table Offset Register                          */
+  __IO uint32_t AIRCR;                   /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register      */
+  __IO uint32_t SCR;                     /*!< Offset: 0x010 (R/W)  System Control Register                               */
+  __IO uint32_t CCR;                     /*!< Offset: 0x014 (R/W)  Configuration Control Register                        */
+       uint32_t RESERVED0[1];
+  __IO uint32_t SHP[2];                  /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED   */
+  __IO uint32_t SHCSR;                   /*!< Offset: 0x024 (R/W)  System Handler Control and State Register             */
+       uint32_t RESERVED1[154];
+  __IO uint32_t SFCR;                    /*!< Offset: 0x290 (R/W)  Security Features Register                            */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24                                             /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20                                             /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16                                             /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4                                             /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0                                             /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL << SCB_CPUID_REVISION_Pos)              /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31                                             /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28                                             /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27                                             /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26                                             /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25                                             /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23                                             /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22                                             /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12                                             /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0                                             /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos)           /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7                                             /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16                                             /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16                                             /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15                                             /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2                                             /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1                                             /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4                                             /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2                                             /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1                                             /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9                                             /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3                                             /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15                                             /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/* SCB Security Features Register Definitions */
+#define SCB_SFCR_UNIBRTIMING_Pos            0                                             /*!< SCB SFCR: UNIBRTIMING Position */
+#define SCB_SFCR_UNIBRTIMING_Msk           (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SFCR: UNIBRTIMING Mask */
+
+#define SCB_SFCR_SECKEY_Pos                16                                             /*!< SCB SFCR: SECKEY Position */
+#define SCB_SFCR_SECKEY_Msk               (0xFFFFUL << SCB_SHCSR_SVCALLPENDED_Pos)        /*!< SCB SFCR: SECKEY Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+    \brief      Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/** \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+       uint32_t RESERVED0[2];
+  __IO uint32_t ACTLR;                   /*!< Offset: 0x008 (R/W)  Auxiliary Control Register      */
+} SCnSCB_Type;
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISMCYCINT_Pos         0                                          /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk        (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos)        /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+    \brief      Type definitions for the System Timer Registers.
+  @{
+ */
+
+/** \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IO uint32_t LOAD;                    /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register       */
+  __IO uint32_t VAL;                     /*!< Offset: 0x008 (R/W)  SysTick Current Value Register      */
+  __I  uint32_t CALIB;                   /*!< Offset: 0x00C (R/ )  SysTick Calibration Register        */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16                                             /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2                                             /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1                                             /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0                                             /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL << SysTick_CTRL_ENABLE_Pos)               /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0                                             /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos)        /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0                                             /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos)        /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31                                             /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30                                             /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0                                             /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos)        /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+    \brief      Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/** \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __I  uint32_t TYPE;                    /*!< Offset: 0x000 (R/ )  MPU Type Register                              */
+  __IO uint32_t CTRL;                    /*!< Offset: 0x004 (R/W)  MPU Control Register                           */
+  __IO uint32_t RNR;                     /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register                     */
+  __IO uint32_t RBAR;                    /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register               */
+  __IO uint32_t RASR;                    /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register         */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos               16                                             /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8                                             /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0                                             /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL << MPU_TYPE_SEPARATE_Pos)                 /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos             2                                             /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1                                             /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0                                             /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL << MPU_CTRL_ENABLE_Pos)                   /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos                  0                                             /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL << MPU_RNR_REGION_Pos)                 /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos                   8                                             /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0xFFFFFFUL << MPU_RBAR_ADDR_Pos)              /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4                                             /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0                                             /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL << MPU_RBAR_REGION_Pos)                 /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos                 16                                             /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28                                             /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24                                             /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19                                             /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18                                             /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17                                             /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16                                             /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8                                             /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1                                             /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0                                             /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL << MPU_RASR_ENABLE_Pos)                   /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+    \brief      SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+                are only accessible over DAP and not via processor. Therefore
+                they are not covered by the Cortex-M0 header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_core_base     Core Definitions
+    \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of SC000 Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address              */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address                 */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct           */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct       */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct          */
+
+#if (__MPU_PRESENT == 1)
+  #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit             */
+  #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit             */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+    \brief      Functions that manage interrupts and exceptions via the NVIC.
+    @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M                   */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  (((uint32_t)(IRQn)       )    &  0x03) * 8 )
+#define _SHP_IDX(IRQn)           ( ((((uint32_t)(IRQn) & 0x0F)-8) >>    2)     )
+#define _IP_IDX(IRQn)            (   ((uint32_t)(IRQn)            >>    2)     )
+
+
+/** \brief  Enable External Interrupt
+
+    The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief  Disable External Interrupt
+
+    The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief  Get Pending Interrupt
+
+    The function reads the pending register in the NVIC and returns the pending bit
+    for the specified interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+
+    \return             0  Interrupt status is not pending.
+    \return             1  Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief  Set Pending Interrupt
+
+    The function sets the pending bit of an external interrupt.
+
+    \param [in]      IRQn  Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief  Clear Pending Interrupt
+
+    The function clears the pending bit of an external interrupt.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief  Set Interrupt Priority
+
+    The function sets the priority of an interrupt.
+
+    \note The priority cannot be set for every core interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+    \param [in]  priority  Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if(IRQn < 0) {
+    SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+        (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+  else {
+    NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+        (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief  Get Interrupt Priority
+
+    The function reads the priority of an interrupt. The interrupt
+    number can be positive to specify an external (device specific)
+    interrupt, or negative to specify an internal (core) interrupt.
+
+
+    \param [in]   IRQn  Interrupt number.
+    \return             Interrupt Priority. Value is aligned automatically to the implemented
+                        priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if(IRQn < 0) {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS)));  } /* get priority for Cortex-M0 system interrupts */
+  else {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS)));  } /* get priority for device specific interrupts  */
+}
+
+
+/** \brief  System Reset
+
+    The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+  __DSB();                                                     /* Ensure all outstanding memory accesses included
+                                                                  buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FA << SCB_AIRCR_VECTKEY_Pos)      |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                     /* Ensure completion of memory access */
+  while(1);                                                    /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+    \brief      Functions that configure the System.
+  @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief  System Tick Configuration
+
+    The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+    Counter is in free running mode to generate periodic interrupts.
+
+    \param [in]  ticks  Number of ticks between two interrupts.
+
+    \return          0  Function succeeded.
+    \return          1  Function failed.
+
+    \note     When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+    function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+    must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk)  return (1);      /* Reload value impossible */
+
+  SysTick->LOAD  = ticks - 1;                                  /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1);  /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0;                                          /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                    /* Enable SysTick IRQ and SysTick Timer */
+  return (0);                                                  /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_SC000_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif

bsp/mb9bf618s/CMSIS/README.txt

@@ -0,0 +1,37 @@
+* -------------------------------------------------------------------
+* Copyright (C) 2011-2013 ARM Limited. All rights reserved.  
+* 
+* Date:        18 March 2013  
+* Revision:    V3.20 
+*  
+* Project:     Cortex Microcontroller Software Interface Standard (CMSIS)
+* Title:       Release Note for CMSIS
+*
+* -------------------------------------------------------------------
+
+
+NOTE - Open the index.html file to access CMSIS documentation
+
+
+The Cortex Microcontroller Software Interface Standard (CMSIS) provides a single standard across all 
+Cortex-Mx processor series vendors. It enables code re-use and code sharing across software projects 
+and reduces time-to-market for new embedded applications.
+
+CMSIS is released under the terms of the end user license agreement ("CMSIS END USER LICENCE AGREEMENT.pdf").
+Any user of the software package is bound to the terms and conditions of the end user license agreement.
+
+
+You will find the following sub-directories:
+
+Documentation           - Contains CMSIS documentation.
+ 
+DSP_Lib                 - MDK project files, Examples and source files etc.. to build the 
+                          CMSIS DSP Software Library for Cortex-M0, Cortex-M3, Cortex-M4 processors.
+
+Include                 - CMSIS Core Support and CMSIS DSP Include Files.
+
+Lib                     - CMSIS DSP Libraries.
+
+RTOS                    - CMSIS RTOS API template header file.
+
+SVD                     - CMSIS SVD Schema files and Conversion Utility.

bsp/mb9bf618s/CMSIS/SConscript

@@ -0,0 +1,21 @@
+Import('RTT_ROOT')
+Import('rtconfig')
+from building import *
+
+cwd = GetCurrentDir()
+src = Glob('DeviceSupport/fujitsu/mb9bf61x/*.c')
+
+CPPPATH = [cwd + '/Include', cwd + '/DeviceSupport/fujitsu/mb9bf61x/']
+
+# add for startup script 
+if rtconfig.CROSS_TOOL == 'gcc':
+	src += ['DeviceSupport/fujitsu/mb9bf61x/startup/gcc/startup_mb9bf61x.c']
+elif rtconfig.CROSS_TOOL == 'keil':
+	src += ['DeviceSupport/fujitsu/mb9bf61x/startup/arm/startup_mb9bf61x.S']
+elif rtconfig.CROSS_TOOL == 'iar':
+	src += ['DeviceSupport/fujitsu/mb9bf61x/startup/iar/startup_mb9bf61x.S']
+
+CPPDEFINES = [rtconfig.FM3_TYPE]
+group = DefineGroup('CMSIS', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES = CPPDEFINES)
+
+Return('group')

bsp/mb9bf618s/SConscript

@@ -0,0 +1,14 @@
+# for module compiling
+import os
+Import('RTT_ROOT')
+
+cwd = str(Dir('#'))
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+Return('objs')

bsp/mb9bf618s/SConstruct

@@ -0,0 +1,34 @@
+import os
+import sys
+import rtconfig
+
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+else:
+    RTT_ROOT = os.path.normpath(os.getcwd() + '/../..')
+
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+from building import *
+
+TARGET = 'rtthread.' + rtconfig.TARGET_EXT
+
+env = Environment(tools = ['mingw'],
+	AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+	CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
+	AR = rtconfig.AR, ARFLAGS = '-rc',
+	LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+
+if rtconfig.PLATFORM == 'iar':
+	env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
+	env.Replace(LINKCOM = ['$LINK $SOURCES $LINKFLAGS -o $TARGET --map project.map'])
+	env.Replace(ARFLAGS = '')
+
+Export('RTT_ROOT')
+Export('rtconfig')
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT)
+
+# make a building
+DoBuilding(TARGET, objs)

bsp/mb9bf618s/applications/SConscript

@@ -0,0 +1,11 @@
+Import('RTT_ROOT')
+Import('rtconfig')
+from building import *
+
+cwd     = os.path.join(str(Dir('#')), 'applications')
+src	= Glob('*.c')
+CPPPATH = [cwd, str(Dir('#'))]
+
+group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')

bsp/mb9bf618s/applications/application.c

@@ -0,0 +1,58 @@
+/*
+ * File      : application.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2009 - 2011, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2011-05-24     Bernard      the first version
+ */
+
+/**
+ * @addtogroup FM3
+ */
+/*@{*/
+
+#include <rtthread.h>
+#include "board.h"
+
+#ifdef  RT_USING_COMPONENTS_INIT
+#include <components.h>
+#endif  /* RT_USING_COMPONENTS_INIT */
+
+void rt_init_thread_entry(void *parameter)
+{
+#ifdef RT_USING_COMPONENTS_INIT
+    /* initialization RT-Thread Components */
+    rt_components_init();
+#endif
+
+#ifdef  RT_USING_FINSH
+    finsh_set_device(RT_CONSOLE_DEVICE_NAME);
+#endif  /* RT_USING_FINSH */
+
+    /**< init led device */
+    {
+        extern void rt_led_hw_init(void);
+        rt_led_hw_init();
+    }
+
+}
+
+int rt_application_init()
+{
+    rt_thread_t tid;
+
+    tid = rt_thread_create("init",
+                           rt_init_thread_entry, RT_NULL,
+                           2048, 8, 20);
+    if (tid != RT_NULL) rt_thread_startup(tid);
+
+    return 0;
+}
+
+/*@}*/

bsp/mb9bf618s/applications/startup.c

@@ -0,0 +1,88 @@
+/*
+ * File      : startup.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2009 - 2011, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2011-02-24     Bernard      first implementation
+ */
+
+#include <rthw.h>
+#include <rtthread.h>
+
+#include "board.h"
+
+/**
+ * @addtogroup FM3
+ */
+
+/*@{*/
+
+extern int  rt_application_init(void);
+
+#ifdef __CC_ARM
+extern int Image$$RW_IRAM1$$ZI$$Limit;
+#elif __ICCARM__
+#pragma section="HEAP"
+#else
+extern int __bss_end;
+#endif
+
+/**
+ * This function will startup RT-Thread RTOS.
+ */
+void rtthread_startup(void)
+{
+    /* init board */
+    rt_hw_board_init();
+
+    /* show version */
+    rt_show_version();
+
+#ifdef RT_USING_HEAP
+#ifdef __CC_ARM
+    rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)FM3_SRAM_END);
+#elif __ICCARM__
+    rt_system_heap_init(__segment_end("HEAP"), (void*)FM3_SRAM_END);
+#else
+    /* init memory system */
+    rt_system_heap_init((void*)&__bss_end, (void*)FM3_SRAM_END);
+#endif
+#endif
+
+    /* init scheduler system */
+    rt_system_scheduler_init();
+
+    /* init timer thread */
+    rt_system_timer_thread_init();
+
+    /* init application */
+    rt_application_init();
+
+    /* init idle thread */
+    rt_thread_idle_init();
+
+    /* start scheduler */
+    rt_system_scheduler_start();
+
+    /* never reach here */
+    return ;
+}
+
+int main(void)
+{
+    /* disable interrupt first */
+    rt_hw_interrupt_disable();
+
+    /* startup RT-Thread RTOS */
+    rtthread_startup();
+
+    return 0;
+}
+
+/*@}*/

bsp/mb9bf618s/drivers/SConscript

@@ -0,0 +1,11 @@
+Import('RTT_ROOT')
+Import('rtconfig')
+from building import *
+
+cwd     = os.path.join(str(Dir('#')), 'drivers')
+src	= Glob('*.c')
+CPPPATH = [cwd]
+
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')

bsp/mb9bf618s/drivers/board.c

@@ -0,0 +1,100 @@
+/*
+ * File      : board.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2009 - 2011 RT-Thread Develop Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2011-02-24     Bernard      first implementation
+ */
+
+#include <rthw.h>
+#include <rtthread.h>
+
+#include "board.h"
+
+#include "serial.h"
+
+#ifdef  RT_USING_COMPONENTS_INIT
+#include <components.h>
+#endif  /* RT_USING_COMPONENTS_INIT */
+
+/**
+ * @addtogroup FM3
+ */
+
+/*@{*/
+
+/**
+ * This is the timer interrupt service routine.
+ *
+ */
+void SysTick_Handler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    rt_tick_increase();
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+/**
+ * This fucntion returns milliseconds since system passed
+ */
+rt_uint32_t rt_hw_tick_get_millisecond(void)
+{
+    rt_tick_t tick;
+    rt_uint32_t value;
+
+#define TICK_MS (1000/RT_TICK_PER_SECOND)
+
+    tick = rt_tick_get();
+    value = tick * TICK_MS + (SysTick->LOAD - SysTick->VAL) * TICK_MS / SysTick->LOAD;
+
+    return value;
+}
+
+/**
+ * This fucntion returns microseconds since system passed
+ */
+rt_uint32_t rt_hw_tick_get_microsecond(void)
+{
+    rt_tick_t tick;
+    rt_uint32_t value;
+
+#define TICK_US	(1000000/RT_TICK_PER_SECOND)
+
+    tick = rt_tick_get();
+    value = tick * TICK_US + (SysTick->LOAD - SysTick->VAL) * TICK_US / SysTick->LOAD;
+
+    return value;
+}
+
+/**
+* This function will initial FM3 Easy Kit board.
+ */
+void rt_hw_board_init(void)
+{
+    /* disable all analog input. */
+    FM3_GPIO->ADE = 0;
+
+    /* init systick */
+    SysTick_Config(SystemCoreClock/RT_TICK_PER_SECOND);
+
+    /* initialize UART device */
+    rt_hw_serial_init();
+    /* set console as UART device */
+    rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
+
+#ifdef RT_USING_COMPONENTS_INIT
+    rt_components_board_init();
+#endif
+}
+
+/*@}*/

bsp/mb9bf618s/drivers/board.h

@@ -0,0 +1,50 @@
+/*
+ * File      : board.h
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2009, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2009-09-22     Bernard      add board.h to this bsp
+ * 2011-03-04     lgnq         add board.h to FM3 bsp
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+#if   defined MB9B610S
+#   include <mb9b610s.h>
+#elif defined MB9B610T
+#   include <mb9b610t.h>
+#else
+#   warning "you must define CPU type. e.g: MB9B610S or MB9B610T"
+#   warning "define MB9B610S default"
+#   define MB9B610S /* default: MB9B610S */
+#   include <mb9b610s.h>
+#endif
+
+#include "serial.h"
+
+//Internal SRAM memory size[Kbytes] <8-64>
+//product  MB9BFx16S/T  MB9BFx17S/T  MB9BFx18S/T
+//FLASH  :    512           768          1024
+//SRAM0  :    32            48           64
+//SRAM1  :    32            48           64
+#define FM3_SRAM_SIZE         128
+#define FM3_SRAM_END          (0x1FFF0000 + FM3_SRAM_SIZE * 1024)
+
+/* RT_USING_UART */
+#define RT_USING_UART0
+//#define RT_USING_UART2
+//#define RT_USING_UART4
+#define RT_UART_RX_BUFFER_SIZE        64
+
+void rt_hw_board_init(void);
+rt_uint32_t rt_hw_tick_get_millisecond(void);
+rt_uint32_t rt_hw_tick_get_microsecond(void);
+
+#endif

bsp/mb9bf618s/drivers/led.c

@@ -0,0 +1,157 @@
+#include <rtthread.h>
+#include "board.h"
+
+#define RT_DEVICE_CTRL_RTC_GET_COUNT        0x81        /**< get count                                   */
+
+#define LED_NUM                             4
+struct fm3_gpio_ctrl
+{
+    uint32_t led_num;
+    volatile uint32_t * PDOR;
+    volatile uint32_t * PDIR;
+};
+
+struct fm3_led
+{
+    /* inherit from rt_device */
+    struct rt_device parent;
+
+    struct fm3_gpio_ctrl fm3_gpio_ctrl[LED_NUM];
+};
+
+static struct fm3_led fm3_led;
+
+static rt_err_t rt_led_init (rt_device_t dev)
+{
+    uint32_t i;
+
+    /* led0 : P54 */
+    FM3_GPIO->PFR5 &= ~((1<<7) | (1<<6) | (1<<5) |(1<<4));  /* set P54 fuction is GPIO. */
+    FM3_GPIO->DDR5 |=  (1<<7) | (1<<6) | (1<<5) |(1<<4);    /* set P54 output. */
+
+    /* LED0 */
+    i = 0;
+    fm3_led.fm3_gpio_ctrl[i].led_num = 4;
+    fm3_led.fm3_gpio_ctrl[i].PDOR = &FM3_GPIO->PDOR5;
+    fm3_led.fm3_gpio_ctrl[i].PDIR = &FM3_GPIO->PDIR5;
+
+    /* LED1 */
+    i++;
+    fm3_led.fm3_gpio_ctrl[i].led_num = 5;
+    fm3_led.fm3_gpio_ctrl[i].PDOR = &FM3_GPIO->PDOR5;
+    fm3_led.fm3_gpio_ctrl[i].PDIR = &FM3_GPIO->PDIR5;
+
+    /* LED2 */
+    i++;
+    fm3_led.fm3_gpio_ctrl[i].led_num = 6;
+    fm3_led.fm3_gpio_ctrl[i].PDOR = &FM3_GPIO->PDOR5;
+    fm3_led.fm3_gpio_ctrl[i].PDIR = &FM3_GPIO->PDIR5;
+
+    /* LED3 */
+    i++;
+    fm3_led.fm3_gpio_ctrl[i].led_num = 7;
+    fm3_led.fm3_gpio_ctrl[i].PDOR = &FM3_GPIO->PDOR5;
+    fm3_led.fm3_gpio_ctrl[i].PDIR = &FM3_GPIO->PDIR5;
+
+    return RT_EOK;
+}
+
+static rt_err_t rt_led_open(rt_device_t dev, rt_uint16_t oflag)
+{
+    return RT_EOK;
+}
+
+static rt_err_t rt_led_close(rt_device_t dev)
+{
+    return RT_EOK;
+}
+
+static rt_size_t rt_led_read (rt_device_t dev, rt_off_t pos, void* buffer,
+                              rt_size_t size)
+{
+    rt_ubase_t index = 0;
+    rt_ubase_t nr = size;
+    rt_uint8_t * value = buffer;
+
+    RT_ASSERT(dev == &fm3_led.parent);
+    RT_ASSERT((pos+size) <= LED_NUM );
+
+    for(index=0; index<nr; index++)
+    {
+        if(*fm3_led.fm3_gpio_ctrl[pos+index].PDIR & 1<<fm3_led.fm3_gpio_ctrl[pos+index].led_num)
+        {
+            *value = 0;
+        }
+        else
+        {
+            *value = 1;
+        }
+        value++;
+    }
+    return index;
+}
+
+static rt_size_t rt_led_write (rt_device_t dev, rt_off_t pos,
+                               const void* buffer, rt_size_t size)
+{
+    rt_ubase_t index = 0;
+    rt_ubase_t nw = size;
+    const rt_uint8_t * value = buffer;
+
+    RT_ASSERT(dev == &fm3_led.parent);
+    RT_ASSERT((pos+size) <= LED_NUM );
+
+    for(index=0; index<nw; index++)
+    {
+        if(*value++)
+        {
+            *fm3_led.fm3_gpio_ctrl[pos+index].PDOR &= ~(1<<fm3_led.fm3_gpio_ctrl[pos+index].led_num);
+        }
+        else
+        {
+            *fm3_led.fm3_gpio_ctrl[pos+index].PDOR |= (1<<fm3_led.fm3_gpio_ctrl[pos+index].led_num);
+        }
+    }
+    return index;
+}
+
+static rt_err_t rt_led_control (rt_device_t dev, rt_uint8_t cmd, void *args)
+{
+    RT_ASSERT(dev == &fm3_led.parent);
+
+    if(cmd == RT_DEVICE_CTRL_RTC_GET_COUNT)
+    {
+        rt_uint32_t * led_num = args;
+        *led_num = LED_NUM;
+    }
+    return RT_EOK;
+}
+
+void rt_led_hw_init(void)
+{
+    fm3_led.parent.type 		= RT_Device_Class_Char;
+    fm3_led.parent.rx_indicate  = RT_NULL;
+    fm3_led.parent.tx_complete  = RT_NULL;
+    fm3_led.parent.init 		= rt_led_init;
+    fm3_led.parent.open		    = rt_led_open;
+    fm3_led.parent.close		= rt_led_close;
+    fm3_led.parent.read         = rt_led_read;
+    fm3_led.parent.write 		= rt_led_write;
+    fm3_led.parent.control 	    = rt_led_control;
+    fm3_led.parent.user_data	= RT_NULL;
+
+    /* register a character device */
+    rt_device_register(&fm3_led.parent, "led", RT_DEVICE_FLAG_RDWR);
+    /* init led device */
+    rt_led_init(&fm3_led.parent);
+}
+
+#ifdef RT_USING_FINSH
+#include <finsh.h>
+void led(rt_uint32_t led, rt_uint32_t value)
+{
+    rt_uint8_t led_value = value;
+    rt_led_write(&fm3_led.parent, led, &led_value, 1);
+}
+FINSH_FUNCTION_EXPORT(led, e.g:led(0,100).)
+#endif

bsp/mb9bf618s/drivers/serial.c

@@ -0,0 +1,437 @@
+/*
+ * File      : serial.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2006-03-13     Bernard      first version
+ * 2011-05-15     lgnq         modified according bernard's implementaion.
+ */
+
+#include <rtthread.h>
+
+#include "serial.h"
+
+/**
+ * @addtogroup FM3 MB9B610
+ */
+/*@{*/
+
+/* RT-Thread Device Interface */
+/**
+ * This function initializes serial
+ */
+static rt_err_t rt_serial_init (rt_device_t dev)
+{
+    struct serial_device* uart = (struct serial_device*) dev->user_data;
+
+    if (!(dev->flag & RT_DEVICE_FLAG_ACTIVATED))
+    {
+        if (dev->flag & RT_DEVICE_FLAG_INT_RX)
+        {
+            rt_memset(uart->int_rx->rx_buffer, 0,
+                      sizeof(uart->int_rx->rx_buffer));
+            uart->int_rx->read_index = uart->int_rx->save_index = 0;
+        }
+
+        if (dev->flag & RT_DEVICE_FLAG_INT_TX)
+        {
+            rt_memset(uart->int_tx->tx_buffer, 0,
+                      sizeof(uart->int_tx->tx_buffer));
+            uart->int_tx->write_index = uart->int_tx->save_index = 0;
+        }
+
+        dev->flag |= RT_DEVICE_FLAG_ACTIVATED;
+    }
+
+    return RT_EOK;
+}
+
+/* save a char to serial buffer */
+static void rt_serial_savechar(struct serial_device* uart, char ch)
+{
+    rt_base_t level;
+
+    /* disable interrupt */
+    level = rt_hw_interrupt_disable();
+
+    uart->int_rx->rx_buffer[uart->int_rx->save_index] = ch;
+    uart->int_rx->save_index ++;
+    if (uart->int_rx->save_index >= UART_RX_BUFFER_SIZE)
+        uart->int_rx->save_index = 0;
+
+    /* if the next position is read index, discard this 'read char' */
+    if (uart->int_rx->save_index == uart->int_rx->read_index)
+    {
+        uart->int_rx->read_index ++;
+        if (uart->int_rx->read_index >= UART_RX_BUFFER_SIZE)
+            uart->int_rx->read_index = 0;
+    }
+
+    /* enable interrupt */
+    rt_hw_interrupt_enable(level);
+}
+
+static rt_err_t rt_serial_open(rt_device_t dev, rt_uint16_t oflag)
+{
+    struct serial_device* uart;
+
+    RT_ASSERT(dev != RT_NULL);
+    uart = (struct serial_device*) dev->user_data;
+
+    if (dev->flag & RT_DEVICE_FLAG_INT_RX)
+    {
+        /* enable interrupt */
+        UART_ENABLE_IRQ(uart->rx_irq);
+    }
+
+    return RT_EOK;
+}
+
+static rt_err_t rt_serial_close(rt_device_t dev)
+{
+    struct serial_device* uart;
+
+    RT_ASSERT(dev != RT_NULL);
+    uart = (struct serial_device*) dev->user_data;
+
+    if (dev->flag & RT_DEVICE_FLAG_INT_RX)
+    {
+        /* disable interrupt */
+        UART_DISABLE_IRQ(uart->rx_irq);
+    }
+
+    return RT_EOK;
+}
+
+static rt_size_t rt_serial_read (rt_device_t dev, rt_off_t pos, void* buffer,
+                                 rt_size_t size)
+{
+    rt_uint8_t* ptr;
+    rt_err_t err_code;
+    struct serial_device* uart;
+
+    ptr = buffer;
+    err_code = RT_EOK;
+    uart = (struct serial_device*)dev->user_data;
+
+    if (dev->flag & RT_DEVICE_FLAG_INT_RX)
+    {
+        rt_base_t level;
+
+        /* interrupt mode Rx */
+        while (size)
+        {
+            if (uart->int_rx->read_index != uart->int_rx->save_index)
+            {
+                *ptr++ = uart->int_rx->rx_buffer[uart->int_rx->read_index];
+                size --;
+
+                /* disable interrupt */
+                level = rt_hw_interrupt_disable();
+
+                uart->int_rx->read_index ++;
+                if (uart->int_rx->read_index >= UART_RX_BUFFER_SIZE)
+                    uart->int_rx->read_index = 0;
+
+                /* enable interrupt */
+                rt_hw_interrupt_enable(level);
+            }
+            else
+            {
+                /* set error code */
+                err_code = -RT_EEMPTY;
+                break;
+            }
+        }
+    }
+    else
+    {
+        /* polling mode */
+        while ((rt_uint32_t)ptr - (rt_uint32_t)buffer < size)
+        {
+            while (uart->uart_device->SSR & SSR_RDRF)
+            {
+                *ptr = uart->uart_device->RDR & 0xff;
+                ptr ++;
+            }
+        }
+    }
+
+    /* set error code */
+    rt_set_errno(err_code);
+    return (rt_uint32_t)ptr - (rt_uint32_t)buffer;
+}
+
+static rt_size_t rt_serial_write (rt_device_t dev, rt_off_t pos,
+                                  const void* buffer, rt_size_t size)
+{
+    rt_uint8_t* ptr;
+    rt_err_t err_code;
+    struct serial_device* uart;
+
+    err_code = RT_EOK;
+    ptr = (rt_uint8_t*)buffer;
+    uart = (struct serial_device*)dev->user_data;
+
+    if (dev->flag & RT_DEVICE_FLAG_INT_TX)
+    {
+        /* interrupt mode Tx */
+        while (uart->int_tx->save_index != uart->int_tx->write_index)
+        {
+            /* save on tx buffer */
+            uart->int_tx->tx_buffer[uart->int_tx->save_index] = *ptr++;
+
+            -- size;
+
+            /* move to next position */
+            uart->int_tx->save_index ++;
+
+            /* wrap save index */
+            if (uart->int_tx->save_index >= UART_TX_BUFFER_SIZE)
+                uart->int_tx->save_index = 0;
+        }
+
+        /* set error code */
+        if (size > 0)
+            err_code = -RT_EFULL;
+    }
+    else
+    {
+        /* polling mode */
+        while (size)
+        {
+            /*
+             * to be polite with serial console add a line feed
+             * to the carriage return character
+             */
+            if (*ptr == '\n' && (dev->flag & RT_DEVICE_FLAG_STREAM))
+            {
+                while (!(uart->uart_device->SSR & SSR_TDRE));
+                uart->uart_device->TDR = '\r';
+            }
+
+            while (!(uart->uart_device->SSR & SSR_TDRE));
+            uart->uart_device->TDR = (*ptr & 0x1FF);
+
+            ++ptr;
+            --size;
+        }
+    }
+
+    /* set error code */
+    rt_set_errno(err_code);
+
+    return (rt_uint32_t)ptr - (rt_uint32_t)buffer;
+}
+
+static rt_err_t rt_serial_control (rt_device_t dev, rt_uint8_t cmd, void *args)
+{
+    RT_ASSERT(dev != RT_NULL);
+
+    switch (cmd)
+    {
+    case RT_DEVICE_CTRL_SUSPEND:
+        /* suspend device */
+        dev->flag |= RT_DEVICE_FLAG_SUSPENDED;
+        break;
+
+    case RT_DEVICE_CTRL_RESUME:
+        /* resume device */
+        dev->flag &= ~RT_DEVICE_FLAG_SUSPENDED;
+        break;
+    }
+
+    return RT_EOK;
+}
+
+/*
+ * serial register
+ */
+rt_err_t rt_hw_serial_register(rt_device_t device, const char* name,
+                               rt_uint32_t flag, struct serial_device *serial)
+{
+    RT_ASSERT(device != RT_NULL);
+
+    device->type 		= RT_Device_Class_Char;
+    device->rx_indicate = RT_NULL;
+    device->tx_complete = RT_NULL;
+    device->init 		= rt_serial_init;
+    device->open		= rt_serial_open;
+    device->close		= rt_serial_close;
+    device->read 		= rt_serial_read;
+    device->write 		= rt_serial_write;
+    device->control 	= rt_serial_control;
+    device->user_data	= serial;
+
+    /* register a character device */
+    return rt_device_register(device, name, RT_DEVICE_FLAG_RDWR | flag);
+}
+
+/* ISR for serial interrupt */
+void rt_hw_serial_isr(rt_device_t device)
+{
+    struct serial_device* uart = (struct serial_device*) device->user_data;
+
+    /* interrupt mode receive */
+    RT_ASSERT(device->flag & RT_DEVICE_FLAG_INT_RX);
+
+    /* save on rx buffer */
+    while (uart->uart_device->SSR & SSR_RDRF)
+    {
+        rt_serial_savechar(uart, uart->uart_device->RDR & 0xff);
+    }
+
+    /* invoke callback */
+    if (device->rx_indicate != RT_NULL)
+    {
+        rt_size_t rx_length;
+
+        /* get rx length */
+        rx_length = uart->int_rx->read_index > uart->int_rx->save_index ?
+                    UART_RX_BUFFER_SIZE - uart->int_rx->read_index + uart->int_rx->save_index :
+                    uart->int_rx->save_index - uart->int_rx->read_index;
+
+        device->rx_indicate(device, rx_length);
+    }
+}
+
+#ifdef RT_USING_UART0
+/* UART0 device driver structure */
+#define UART0	FM3_MFS0_UART
+struct serial_int_rx uart0_int_rx;
+struct serial_device uart0 =
+{
+    UART0,
+    MFS0RX_IRQn,
+    MFS0TX_IRQn,
+    &uart0_int_rx,
+    RT_NULL
+};
+struct rt_device uart0_device;
+
+void MFS0RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+    rt_hw_serial_isr(&uart0_device);
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /**< #ifdef RT_USING_UART0 */
+
+#ifdef RT_USING_UART2
+/* UART2 device driver structure */
+#define UART2	FM3_MFS2_UART
+struct serial_int_rx uart2_int_rx;
+struct serial_device uart2 =
+{
+    UART2,
+    MFS2RX_IRQn,
+    MFS2TX_IRQn,
+    &uart2_int_rx,
+    RT_NULL
+};
+struct rt_device uart2_device;
+
+void MFS2RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+    rt_hw_serial_isr(&uart2_device);
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /**< #ifdef RT_USING_UART2 */
+
+#ifdef RT_USING_UART4
+/* UART4 device driver structure */
+#define UART4	FM3_MFS4_UART
+struct serial_int_rx uart4_int_rx;
+struct serial_device uart4 =
+{
+    (FM3_MFS03_UART_TypeDef*)UART4,
+    MFS4RX_IRQn,
+    MFS4TX_IRQn,
+    &uart4_int_rx,
+    RT_NULL
+};
+struct rt_device uart4_device;
+
+void MFS4RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+    rt_hw_serial_isr(&uart4_device);
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /**< #ifdef RT_USING_UART4 */
+
+void rt_hw_serial_init(void)
+{
+    uint32_t APB2_clock = (SystemCoreClock >> (APBC2_PSR_Val & 0x03));
+
+#ifdef RT_USING_UART0
+    /* initialize UART0 */
+    /* Set Uart Ch0 Port, SIN0_0:P21, SOT0_0:P22 */
+    FM3_GPIO->ADE &= ~(1UL<<31); /* disable P22 AN31 function */
+    FM3_GPIO->PFR2 = FM3_GPIO->PFR2 | (1<<1) | (1<<2);
+    FM3_GPIO->EPFR07 = FM3_GPIO->EPFR07 & ~(3<<4 | 3<<6) | (1<<4) | (1<<6);
+
+    uart0.uart_device->SMR = SMR_MD_UART | SMR_SOE;;
+    uart0.uart_device->BGR = (APB2_clock + (BPS/2))/BPS - 1; /* round */
+    uart0.uart_device->ESCR = ESCR_DATABITS_8;
+    uart0.uart_device->SCR = SCR_RXE | SCR_TXE | SCR_RIE;
+
+    /* register UART0 device */
+    rt_hw_serial_register(&uart0_device,
+                          "uart0",
+                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
+                          &uart0);
+#endif /**< #ifdef RT_USING_UART0 */
+
+#ifdef RT_USING_UART2
+    /* initialize UART2 */
+    /* Set Uart Ch2 Port, SIN2_2:P17, SOT2_2:P18 */
+    FM3_GPIO->ADE &= ~(1<<7 | 1<<8); /* disable P17 AN07 and P18 AN08 function */
+    FM3_GPIO->PFR1 = FM3_GPIO->PFR1 | (1<<7) | (1<<8) ;
+    FM3_GPIO->EPFR07 = FM3_GPIO->EPFR07 | (3<<16) | (3<<18) ;
+
+    uart2.uart_device->SMR = SMR_MD_UART | SMR_SOE;;
+    uart2.uart_device->BGR = (APB2_clock + (BPS/2))/BPS - 1; /* round */
+    uart2.uart_device->ESCR = ESCR_DATABITS_8;
+    uart2.uart_device->SCR = SCR_RXE | SCR_TXE | SCR_RIE;
+
+    /* register UART2 device */
+    rt_hw_serial_register(&uart2_device,
+                          "uart2",
+                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
+                          &uart2);
+#endif /**< #ifdef RT_USING_UART2 */
+
+#ifdef RT_USING_UART4
+    /* initialize UART4 */
+    /* Set Uart Ch4 Port, SIN4_2:P05, SOT4_2:P06 */
+    FM3_GPIO->PFR0 = FM3_GPIO->PFR0 | (1<<5) | (1<<6);
+    FM3_GPIO->EPFR08 = FM3_GPIO->EPFR08 | (3<<4) | (3<<6);
+
+    uart4.uart_device->SMR = SMR_MD_UART | SMR_SOE;;
+    uart4.uart_device->BGR = (APB2_clock + (BPS/2))/BPS - 1; /* round */
+    uart4.uart_device->ESCR = ESCR_DATABITS_8;
+    uart4.uart_device->SCR = SCR_RXE | SCR_TXE | SCR_RIE;
+
+    /* register UART4 device */
+    rt_hw_serial_register(&uart4_device,
+                          "uart4",
+                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
+                          &uart4);
+#endif /**< #ifdef RT_USING_UART4 */
+}
+
+/*@}*/

bsp/mb9bf618s/drivers/serial.h

@@ -0,0 +1,99 @@
+/*
+ * File      : serial.h
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2006-03-13     Bernard      first version
+ * 2011-05-15     lgnq         modified according bernard's implementaion.      	  	
+ */
+
+#ifndef __RT_HW_SERIAL_H__
+#define __RT_HW_SERIAL_H__
+
+#include <rthw.h>
+#include <rtthread.h>
+
+#include "board.h"
+
+#define SMR_SOE          0x01U
+#define SMR_BDS          0x04U
+#define SMR_SBL          0x08U
+#define SMR_WUCR         0x10U
+#define SMR_MD_UART      0x00U
+#define SMR_MD_UART_MP   0x20U
+#define SMR_MD_SIO       0x40U
+#define SMR_MD_LIN       0x60U
+#define SMR_MD_I2C       0x80U
+
+#define SCR_TXE          0x01U
+#define SCR_RXE          0x02U
+#define SCR_TBIE         0x04U
+#define SCR_TIE          0x08U
+#define SCR_RIE          0x10U
+#define SCR_UPGL         0x80U
+
+#define SSR_TBI          0x01U
+#define SSR_TDRE         0x02U
+#define SSR_RDRF         0x04U
+#define SSR_ORE          0x08U
+#define SSR_FRE          0x10U
+#define SSR_PE           0x20U
+#define SSR_REC          0x80U
+
+#define ESCR_P           0x08U
+#define ESCR_PEN         0x10U
+#define ESCR_INV         0x20U
+#define ESCR_ESBL        0x40U
+#define ESCR_FLWEN       0x80U
+#define ESCR_DATABITS_8  0x00U
+#define ESCR_DATABITS_5  0x01U
+#define ESCR_DATABITS_6  0x02U
+#define ESCR_DATABITS_7  0x03U
+#define ESCR_DATABITS_9  0x04U
+
+#define BPS					115200	/* serial baudrate */
+
+#define UART_RX_BUFFER_SIZE		64
+#define UART_TX_BUFFER_SIZE		64
+
+struct serial_int_rx
+{
+	rt_uint8_t  rx_buffer[UART_RX_BUFFER_SIZE];
+	rt_uint32_t read_index, save_index;
+};
+
+struct serial_int_tx
+{
+	rt_uint8_t  tx_buffer[UART_TX_BUFFER_SIZE];
+	rt_uint32_t write_index, save_index;
+};
+
+/*
+ *  Enable/DISABLE Interrupt Controller
+ */
+/* deviation from MISRA-C:2004 Rule 19.7 */
+#define UART_ENABLE_IRQ(n)            NVIC_EnableIRQ((n))
+#define UART_DISABLE_IRQ(n)           NVIC_DisableIRQ((n))
+
+struct serial_device
+{
+	FM3_MFS03_UART_TypeDef* uart_device;
+	/* irq number */
+	IRQn_Type rx_irq, tx_irq;
+
+	/* rx structure */
+	struct serial_int_rx* int_rx;
+	/* tx structure */
+	struct serial_int_tx* int_tx;
+};
+
+void rt_hw_serial_isr(rt_device_t device);
+void rt_hw_serial_init(void);
+
+#endif

bsp/mb9bf618s/rtconfig.h

@@ -0,0 +1,74 @@
+/* RT-Thread config file */
+#ifndef __RTTHREAD_CFG_H__
+#define __RTTHREAD_CFG_H__
+
+/* RT_NAME_MAX*/
+#define RT_NAME_MAX				        8
+
+/* RT_ALIGN_SIZE*/
+#define RT_ALIGN_SIZE			        4
+
+/* PRIORITY_MAX */
+#define RT_THREAD_PRIORITY_MAX	        32
+
+/* Tick per Second */
+#define RT_TICK_PER_SECOND		        100
+
+/* SECTION: RT_DEBUG */
+/* Thread Debug */
+#define RT_DEBUG
+#define RT_USING_OVERFLOW_CHECK
+
+/* Using Hook */
+#define RT_USING_HOOK
+
+/* SECTION: IPC */
+/* Using Semaphore */
+#define RT_USING_SEMAPHORE
+
+/* Using Mutex */
+#define RT_USING_MUTEX
+
+/* Using Event */
+#define RT_USING_EVENT
+
+/* Using MailBox */
+#define RT_USING_MAILBOX
+
+/* Using Message Queue */
+#define RT_USING_MESSAGEQUEUE
+
+/* SECTION: Memory Management */
+/* Using Memory Pool Management*/
+#define RT_USING_MEMPOOL
+
+/* Using Dynamic Heap Management */
+#define RT_USING_HEAP
+
+/* Using Small MM */
+#define RT_USING_SMALL_MEM
+
+// <bool name="RT_USING_COMPONENTS_INIT" description="Using RT-Thread components initialization" default="true" />
+#define RT_USING_COMPONENTS_INIT
+
+/* SECTION: Device System */
+/* Using Device System */
+#define RT_USING_DEVICE
+
+/* SECTION: Console options */
+/* #define RT_TINY_SIZE */
+#define RT_USING_CONSOLE
+/* the buffer size of console */
+#define RT_CONSOLEBUF_SIZE	128
+// <string name="RT_CONSOLE_DEVICE_NAME" description="The device name for console" default="uart1" />
+#define RT_CONSOLE_DEVICE_NAME	        "uart0"
+
+/* SECTION: finsh, a C-Express shell */
+/* Using FinSH as Shell*/
+#define RT_USING_FINSH
+/* Using symbol table */
+#define FINSH_USING_SYMTAB
+#define FINSH_USING_DESCRIPTION
+#define FINSH_THREAD_STACK_SIZE         1024
+
+#endif

bsp/mb9bf618s/rtconfig.py

@@ -0,0 +1,118 @@
+# toolchains options
+ARCH='arm'
+CPU='cortex-m3'
+CROSS_TOOL='keil'
+
+#device options
+# FM3_TYPE = 
+# 'MB9B610S','MB9B610T',
+FM3_TYPE = 'MB9B610S'
+
+# cross_tool provides the cross compiler
+# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
+
+if  CROSS_TOOL == 'gcc':
+	PLATFORM 	= 'gcc'
+	EXEC_PATH 	= r'F:\Program Files\CodeSourcery\Sourcery_CodeBench_Lite_for_ARM_EABI_2013.05.23\bin'
+elif CROSS_TOOL == 'keil':
+	PLATFORM 	= 'armcc'
+	EXEC_PATH 	= r'E:/Keil'
+elif CROSS_TOOL == 'iar':
+	PLATFORM 	= 'iar'
+	IAR_PATH 	= r'C:\Program Files\IAR Systems\Embedded Workbench 6.0 Evaluation'
+
+BUILD = 'debug'
+
+if PLATFORM == 'gcc':
+    # toolchains
+    PREFIX = 'arm-none-eabi-'
+    CC = PREFIX + 'gcc'
+    AS = PREFIX + 'gcc'
+    AR = PREFIX + 'ar'
+    LINK = PREFIX + 'gcc'
+    TARGET_EXT = 'axf'
+    SIZE = PREFIX + 'size'
+    OBJDUMP = PREFIX + 'objdump'
+    OBJCPY = PREFIX + 'objcopy'
+
+    DEVICE = ' -mcpu=cortex-m3 -mthumb -ffunction-sections -fdata-sections'
+    CFLAGS = DEVICE
+    AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp'
+    LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rtthread-fm3.map,-cref,-u,Reset_Handler -T rtthread-fm3.ld'
+
+    CPATH = ''
+    LPATH = ''
+
+    if BUILD == 'debug':
+        CFLAGS += ' -O0 -gdwarf-2'
+        AFLAGS += ' -gdwarf-2'
+    else:
+        CFLAGS += ' -O2'
+
+    POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
+elif PLATFORM == 'armcc':
+    # toolchains
+    CC = 'armcc'
+    AS = 'armasm'
+    AR = 'armar'
+    LINK = 'armlink'
+    TARGET_EXT = 'axf'
+
+    DEVICE = ' --device DARMSTM'
+    CFLAGS = DEVICE + ' --apcs=interwork'
+    AFLAGS = DEVICE
+    LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers --list rtthread.map --scatter rtthread-fm3.sct'
+
+    CFLAGS += ' -I' + EXEC_PATH + '/ARM/RV31/INC'
+    LFLAGS += ' --libpath ' + EXEC_PATH + '/ARM/RV31/LIB'
+
+    EXEC_PATH += '/arm/bin40/'
+
+    if BUILD == 'debug':
+        CFLAGS += ' -g -O0'
+        AFLAGS += ' -g'
+    else:
+        CFLAGS += ' -O2'
+
+    POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
+
+elif PLATFORM == 'iar':
+    # toolchains
+    CC = 'iccarm'
+    AS = 'iasmarm'
+    AR = 'iarchive'
+    LINK = 'ilinkarm'
+    TARGET_EXT = 'out'
+
+    CFLAGS = ''
+    CFLAGS += ' --diag_suppress Pa050'
+    CFLAGS += ' --no_cse' 
+    CFLAGS += ' --no_unroll' 
+    CFLAGS += ' --no_inline' 
+    CFLAGS += ' --no_code_motion' 
+    CFLAGS += ' --no_tbaa' 
+    CFLAGS += ' --no_clustering' 
+    CFLAGS += ' --no_scheduling' 
+    CFLAGS += ' --debug' 
+    CFLAGS += ' --endian=little' 
+    CFLAGS += ' --cpu=Cortex-M3' 
+    CFLAGS += ' -e' 
+    CFLAGS += ' --fpu=None'
+    CFLAGS += ' --dlib_config "' + IAR_PATH + '/arm/INC/c/DLib_Config_Normal.h"'    
+    CFLAGS += ' -Ol'    
+    CFLAGS += ' --use_c++_inline'    
+        
+    AFLAGS = ''
+    AFLAGS += ' -s+' 
+    AFLAGS += ' -w+' 
+    AFLAGS += ' -r' 
+    AFLAGS += ' --cpu Cortex-M3' 
+    AFLAGS += ' --fpu None' 
+    AFLAGS += ' -I"' + IAR_PATH + '/arm/INC"'
+
+    LFLAGS = ' --config mb9bf506.icf'
+    LFLAGS += ' --semihosting' 
+    LFLAGS += ' --entry __iar_program_start'    
+
+    EXEC_PATH = IAR_PATH + '/arm/bin/'
+    POST_ACTION = 'ielftool.exe --srec --verbose $TARGET rtthread.srec' 

bsp/mb9bf618s/rtthread-fm3.icf

@@ -0,0 +1,33 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x0;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x0;
+define symbol __ICFEDIT_region_ROM_end__   = 0x000FFFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x1FFF0000;
+define symbol __ICFEDIT_region_RAM_end__   = 0x2000FFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__   = 0x000;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section FSymTab };
+keep { section VSymTab };
+keep { section .rti_fn* };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite, block CSTACK, last block HEAP };

bsp/mb9bf618s/rtthread-fm3.ld

@@ -0,0 +1,143 @@
+/*
+ * linker script for Fujitsu with GNU ld
+ * aozima 2013-07-13
+ */
+
+/* Program Entry, set to mark it as "used" and avoid gc */
+MEMORY
+{
+    CODE (rx) : ORIGIN = 0x00000000, LENGTH =   1M /*   1MB flash */
+    DATA (rw) : ORIGIN = 0x20000000, LENGTH = 128k /* 128KB sram, 64KB SRAM0 + 64KB SRAM1 */
+}
+ENTRY(Reset_Handler)
+_system_stack_size = 0x400;
+
+SECTIONS
+{
+    .text :
+    {
+        . = ALIGN(4);
+        _isr_vector = .;     /* define isr_vector start address */
+        _stext = .;
+        KEEP(*(.isr_vector))            /* Startup code */
+        . = ALIGN(4);
+        *(.text)                        /* remaining code */
+        *(.text.*)                      /* remaining code */
+        *(.rodata)                      /* read-only data (constants) */
+        *(.rodata*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.gnu.linkonce.t*)
+
+        /* section information for finsh shell */
+        . = ALIGN(4);
+        __fsymtab_start = .;
+        KEEP(*(FSymTab))
+        __fsymtab_end = .;
+        . = ALIGN(4);
+        __vsymtab_start = .;
+        KEEP(*(VSymTab))
+        __vsymtab_end = .;
+        . = ALIGN(4);
+
+        /* section information for initial. */
+        . = ALIGN(4);
+        __rt_init_start = .;
+        KEEP(*(SORT(.rti_fn*)))
+        __rt_init_end = .;
+        . = ALIGN(4);
+
+        . = ALIGN(4);
+        _etext = .;
+    } > CODE = 0
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+
+        /* This is used by the startup in order to initialize the .data secion */
+        _sidata = .;
+    } > CODE
+    __exidx_end = .;
+
+    /* .data section which is used for initialized data */
+
+    .data : AT (_sidata)
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _sdata = . ;
+
+        *(.data)
+        *(.data.*)
+        *(.gnu.linkonce.d*)
+
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _edata = . ;
+    } >DATA
+
+    .stack : 
+    {
+        . = . + _system_stack_size;
+        . = ALIGN(4);
+        _estack = .;
+    } >DATA
+
+    __bss_start = .;
+    .bss :
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _sbss = .;
+
+        *(.bss)
+        *(.bss.*)
+        *(COMMON)
+
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _ebss = . ;
+        
+        *(.bss.init)
+    } > DATA
+    __bss_end = .;
+
+    _end = .;
+
+    /* Stabs debugging sections.  */
+    .stab          0 : { *(.stab) }
+    .stabstr       0 : { *(.stabstr) }
+    .stab.excl     0 : { *(.stab.excl) }
+    .stab.exclstr  0 : { *(.stab.exclstr) }
+    .stab.index    0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment       0 : { *(.comment) }
+    /* DWARF debug sections.
+     * Symbols in the DWARF debugging sections are relative to the beginning
+     * of the section so we begin them at 0.  */
+    /* DWARF 1 */
+    .debug          0 : { *(.debug) }
+    .line           0 : { *(.line) }
+    /* GNU DWARF 1 extensions */
+    .debug_srcinfo  0 : { *(.debug_srcinfo) }
+    .debug_sfnames  0 : { *(.debug_sfnames) }
+    /* DWARF 1.1 and DWARF 2 */
+    .debug_aranges  0 : { *(.debug_aranges) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    /* DWARF 2 */
+    .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+    .debug_abbrev   0 : { *(.debug_abbrev) }
+    .debug_line     0 : { *(.debug_line) }
+    .debug_frame    0 : { *(.debug_frame) }
+    .debug_str      0 : { *(.debug_str) }
+    .debug_loc      0 : { *(.debug_loc) }
+    .debug_macinfo  0 : { *(.debug_macinfo) }
+    /* SGI/MIPS DWARF 2 extensions */
+    .debug_weaknames 0 : { *(.debug_weaknames) }
+    .debug_funcnames 0 : { *(.debug_funcnames) }
+    .debug_typenames 0 : { *(.debug_typenames) }
+    .debug_varnames  0 : { *(.debug_varnames) }
+}

bsp/mb9bf618s/rtthread-fm3.sct

@@ -0,0 +1,15 @@
+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x00000000 0x00100000  {    ; load region size_region
+  ER_IROM1 0x00000000 0x00100000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+  RW_IRAM1 0x1FFF0000 0x00020000  {  ; RW data
+   .ANY (+RW +ZI)
+  }
+}
+

bsp/mb9bf618s/template.uvproj

@@ -0,0 +1,394 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>rtthread</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>MB9BF618S</Device>
+          <Vendor>Fujitsu Semiconductors</Vendor>
+          <Cpu>IRAM(0x20000000-0x2000FFFF) IRAM2(0x1FFF0000-0x1FFFFFFF) IROM(0x00000000-0x000FFFFF) CLOCK(4000000) CPUTYPE("Cortex-M3")</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile>"Startup\Fujitsu\MB9BF610\startup_mb9bf61x.s" ("Fujitsu MB9BF610 Startup Code")</StartupFile>
+          <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0MB9BFx08_1024 -FS00 -FL0100000)</FlashDriverDll>
+          <DeviceId>6149</DeviceId>
+          <RegisterFile>mb9bf618s.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>SFD\Fujitsu\MB9BF610\MB9BF618S.SFR</SFDFile>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath>Fujitsu\MB9BF610\</RegisterFilePath>
+          <DBRegisterFilePath>Fujitsu\MB9BF610\</DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\build\</OutputDirectory>
+          <OutputName>rtthread-fm3</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>0</BrowseInformation>
+          <ListingPath>.\build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>1</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments>-MPU</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM3</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM3</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>7</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4099</DriverSelection>
+          </Flash1>
+          <bUseTDR>0</bUseTDR>
+          <Flash2>Segger\JL2CM3.dll</Flash2>
+          <Flash3>"" ()</Flash3>
+          <Flash4></Flash4>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M3"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>0</RvdsVP>
+            <hadIRAM2>1</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x100000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x100000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x1fff0000</StartAddress>
+                <Size>0x20000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>0</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <ScatterFile>rtthread-fm3.sct</ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+    </Target>
+  </Targets>
+
+</Project>