diff --git a/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/pins_arduino.h b/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/pins_arduino.h index 098f4245be..58f6993d57 100644 --- a/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/pins_arduino.h +++ b/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/pins_arduino.h @@ -63,16 +63,6 @@ #define LED_BUILTIN D22 /* Default Built-in LED */ -/* - * High accuracy timing is provided by hardware timer 7. - * ALL of the Cortex-M CPU don't need to provide extra hardware timer. - * RTduino will automatically use Cortex-M internal timer to provide the - * high accuracy timing. - * This is just an example to show how to use hardware timer to provide - * high accuracy timing for RTduino. - */ -#define RTDUINO_DEFAULT_HWTIMER_DEVICE_NAME "timer7" - /* Serial2 - PA2-TX PA3-RX */ #define RTDUINO_SERIAL2_DEVICE_NAME "uart2" diff --git a/bsp/stm32/stm32l475-atk-pandora/board/Kconfig b/bsp/stm32/stm32l475-atk-pandora/board/Kconfig index 61d4f2abfb..56a58ecbe1 100644 --- a/bsp/stm32/stm32l475-atk-pandora/board/Kconfig +++ b/bsp/stm32/stm32l475-atk-pandora/board/Kconfig @@ -24,8 +24,6 @@ menu "Onboard Peripheral Drivers" select PKG_USING_RTDUINO select BSP_USING_STLINK_TO_USART select BSP_USING_GPIO - select BSP_USING_TIM - select BSP_USING_TIM7 select BSP_USING_PWM select BSP_USING_PWM1 select BSP_USING_PWM1_CH1 diff --git a/bsp/stm32/stm32l476-st-nucleo/applications/arduino_pinout/pins_arduino.h b/bsp/stm32/stm32l476-st-nucleo/applications/arduino_pinout/pins_arduino.h index 68eebade8b..25108de7c3 100644 --- a/bsp/stm32/stm32l476-st-nucleo/applications/arduino_pinout/pins_arduino.h +++ b/bsp/stm32/stm32l476-st-nucleo/applications/arduino_pinout/pins_arduino.h @@ -43,4 +43,6 @@ /* i2c1 : PB9-SDA PB8-SCL */ #define RTDUINO_DEFAULT_IIC_BUS_NAME "i2c1" +#define RTDUINO_TONE_HWTIMER_DEVICE_NAME "timer7" + #endif /* Pins_Arduino_h */ diff --git a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/.mxproject b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/.mxproject index 7de78f1c9b..bdf4763f7c 100644 --- a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/.mxproject +++ b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/.mxproject @@ -6,12 +6,12 @@ SourceFiles=..\Src\main.c;..\Src\stm32l4xx_it.c;..\Src\stm32l4xx_hal_msp.c;F:\ST HeaderPath=F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers\STM32L4xx_HAL_Driver\Inc;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers\STM32L4xx_HAL_Driver\Inc\Legacy;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers\CMSIS\Device\ST\STM32L4xx\Include;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers\CMSIS\Include;..\Inc; CDefines=USE_HAL_DRIVER;STM32L476xx;USE_HAL_DRIVER;USE_HAL_DRIVER; +[] +SourceFiles=;; + [PreviousGenFiles] HeaderPath=..\Inc HeaderFiles=stm32l4xx_it.h;stm32l4xx_hal_conf.h;main.h; SourcePath=..\Src SourceFiles=stm32l4xx_it.c;stm32l4xx_hal_msp.c;main.c; -[] -SourceFiles=;; - diff --git a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc index 6813dccb99..4c20c17060 100644 --- a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc +++ b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc @@ -16,10 +16,11 @@ Mcu.CPN=STM32L476RGT3 Mcu.Family=STM32L4 Mcu.IP0=ADC1 Mcu.IP1=LPTIM1 -Mcu.IP10=TIM15 -Mcu.IP11=TIM16 -Mcu.IP12=TIM17 -Mcu.IP13=USART2 +Mcu.IP10=TIM7 +Mcu.IP11=TIM15 +Mcu.IP12=TIM16 +Mcu.IP13=TIM17 +Mcu.IP14=USART2 Mcu.IP2=NVIC Mcu.IP3=RCC Mcu.IP4=RTC @@ -28,7 +29,7 @@ Mcu.IP6=SYS Mcu.IP7=TIM2 Mcu.IP8=TIM3 Mcu.IP9=TIM4 -Mcu.IPNb=14 +Mcu.IPNb=15 Mcu.Name=STM32L476R(C-E-G)Tx Mcu.Package=LQFP64 Mcu.Pin0=PC14-OSC32_IN (PC14) @@ -48,9 +49,10 @@ Mcu.Pin20=PB6 Mcu.Pin21=VP_LPTIM1_VS_LPTIM_counterModeInternalClock Mcu.Pin22=VP_RTC_VS_RTC_Activate Mcu.Pin23=VP_SYS_VS_Systick -Mcu.Pin24=VP_TIM15_VS_ClockSourceINT -Mcu.Pin25=VP_TIM16_VS_ClockSourceINT -Mcu.Pin26=VP_TIM17_VS_ClockSourceINT +Mcu.Pin24=VP_TIM7_VS_ClockSourceINT +Mcu.Pin25=VP_TIM15_VS_ClockSourceINT +Mcu.Pin26=VP_TIM16_VS_ClockSourceINT +Mcu.Pin27=VP_TIM17_VS_ClockSourceINT Mcu.Pin3=PC1 Mcu.Pin4=PA0 Mcu.Pin5=PA1 @@ -58,7 +60,7 @@ Mcu.Pin6=PA2 Mcu.Pin7=PA3 Mcu.Pin8=PA4 Mcu.Pin9=PA7 -Mcu.PinsNb=27 +Mcu.PinsNb=28 Mcu.ThirdPartyNb=0 Mcu.UserConstants= Mcu.UserName=STM32L476RGTx @@ -147,7 +149,7 @@ ProjectManager.StackSize=0x400 ProjectManager.TargetToolchain=MDK-ARM V5 ProjectManager.ToolChainLocation= ProjectManager.UnderRoot=false -ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_SPI3_Init-SPI3-false-HAL-true,6-MX_TIM15_Init-TIM15-false-HAL-true,7-MX_TIM16_Init-TIM16-false-HAL-true,8-MX_TIM17_Init-TIM17-false-HAL-true,9-MX_ADC1_Init-ADC1-false-HAL-true,10-MX_ADC2_Init-ADC2-false-HAL-true,11-MX_ADC3_Init-ADC3-false-HAL-true,12-MX_LPTIM1_Init-LPTIM1-false-HAL-true,13-MX_TIM2_Init-TIM2-false-HAL-true,14-MX_TIM3_Init-TIM3-false-HAL-true,15-MX_TIM4_Init-TIM4-false-HAL-true +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_SPI3_Init-SPI3-false-HAL-true,6-MX_TIM15_Init-TIM15-false-HAL-true,7-MX_TIM16_Init-TIM16-false-HAL-true,8-MX_TIM17_Init-TIM17-false-HAL-true,9-MX_ADC1_Init-ADC1-false-HAL-true,10-MX_LPTIM1_Init-LPTIM1-false-HAL-true,11-MX_TIM2_Init-TIM2-false-HAL-true,12-MX_TIM3_Init-TIM3-false-HAL-true,13-MX_TIM4_Init-TIM4-false-HAL-true RCC.ADCFreq_Value=64000000 RCC.AHBFreq_Value=80000000 RCC.APB1Freq_Value=80000000 @@ -256,4 +258,6 @@ VP_TIM16_VS_ClockSourceINT.Mode=Enable_Timer VP_TIM16_VS_ClockSourceINT.Signal=TIM16_VS_ClockSourceINT VP_TIM17_VS_ClockSourceINT.Mode=Enable_Timer VP_TIM17_VS_ClockSourceINT.Signal=TIM17_VS_ClockSourceINT +VP_TIM7_VS_ClockSourceINT.Mode=Enable_Timer +VP_TIM7_VS_ClockSourceINT.Signal=TIM7_VS_ClockSourceINT board=custom diff --git a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c index 80379970b0..df4320baf7 100644 --- a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c +++ b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c @@ -433,7 +433,18 @@ void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef* htim_pwm) */ void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base) { - if(htim_base->Instance==TIM15) + if(htim_base->Instance==TIM7) + { + /* USER CODE BEGIN TIM7_MspInit 0 */ + + /* USER CODE END TIM7_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_TIM7_CLK_ENABLE(); + /* USER CODE BEGIN TIM7_MspInit 1 */ + + /* USER CODE END TIM7_MspInit 1 */ + } + else if(htim_base->Instance==TIM15) { /* USER CODE BEGIN TIM15_MspInit 0 */ @@ -619,7 +630,18 @@ void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef* htim_pwm) */ void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base) { - if(htim_base->Instance==TIM15) + if(htim_base->Instance==TIM7) + { + /* USER CODE BEGIN TIM7_MspDeInit 0 */ + + /* USER CODE END TIM7_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_TIM7_CLK_DISABLE(); + /* USER CODE BEGIN TIM7_MspDeInit 1 */ + + /* USER CODE END TIM7_MspDeInit 1 */ + } + else if(htim_base->Instance==TIM15) { /* USER CODE BEGIN TIM15_MspDeInit 0 */ diff --git a/bsp/stm32/stm32l476-st-nucleo/board/Kconfig b/bsp/stm32/stm32l476-st-nucleo/board/Kconfig index df4c5ec513..7c416de917 100644 --- a/bsp/stm32/stm32l476-st-nucleo/board/Kconfig +++ b/bsp/stm32/stm32l476-st-nucleo/board/Kconfig @@ -20,6 +20,8 @@ menu "Onboard Peripheral Drivers" select PKG_USING_RTDUINO select BSP_USING_STLINK_TO_USART select BSP_USING_GPIO + select BSP_USING_TIM + select BSP_USING_TIM7 select BSP_USING_ADC select BSP_USING_ADC1 select BSP_USING_PWM @@ -176,6 +178,10 @@ menu "On-chip Peripheral Drivers" default n select RT_USING_HWTIMER if BSP_USING_TIM + config BSP_USING_TIM7 + bool "Enable TIM7" + default n + config BSP_USING_TIM15 bool "Enable TIM15" default n