libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity

bsp/tm4c123: add hardware i2c support

This commit is contained in:
wirano 2024-04-11 16:59:10 +08:00 committed by Meco Man
parent 86f1a0d2b2
commit 5e9257fcd1
8 changed files with 429 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

80
bsp/tm4c123bsp/board/Kconfig
View File

@ -188,21 +188,75 @@ menu "On-chip Peripheral Drivers"
default n
endif
menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)"
menuconfig BSP_USING_I2C
bool "Enable I2C BUS"
default n
select RT_USING_I2C
select RT_USING_I2C_BITOPS
select RT_USING_PIN
if BSP_USING_I2C1
config BSP_I2C1_SCL_PIN
int "i2c1 scl pin number"
range 0 175
default 22
config BSP_I2C1_SDA_PIN
int "I2C1 sda pin number"
range 0 175
default 23
if BSP_USING_I2C
config BSP_USING_I2C0
bool "Enable I2C0 BUS"
default n
if BSP_USING_I2C0
choice
prompt "I2C0 CLK frequency"
default BSP_I2C0_CLK_100
config BSP_I2C0_CLK_100
bool "100kHz"
config BSP_I2C0_CLK_400
bool "400kHz"
endchoice
endif
config BSP_USING_I2C1
bool "Enable I2C1 BUS"
default n
if BSP_USING_I2C1
choice
prompt "I2C1 CLK frequency"
default BSP_I2C1_CLK_100
config BSP_I2C1_CLK_100
bool "100kHz"
config BSP_I2C1_CLK_400
bool "400kHz"
endchoice
endif
config BSP_USING_I2C2
bool "Enable I2C2 BUS"
default n
if BSP_USING_I2C2
choice
prompt "I2C2 CLK frequency"
default BSP_I2C3_CLK_100
config BSP_I2C2_CLK_100
bool "100kHz"
config BSP_I2C2_CLK_400
bool "400kHz"
endchoice
endif
config BSP_USING_I2C3
bool "Enable I2C3 BUS"
default n
if BSP_USING_I2C3
choice
prompt "I2C3 CLK frequency"
default BSP_I2C4_CLK_100
config BSP_I2C3_CLK_100
bool "100kHz"
config BSP_I2C3_CLK_400
bool "400kHz"
endchoice
endif
endif
menuconfig BSP_USING_TIM

3
bsp/tm4c123bsp/board/board.c
View File

@ -58,6 +58,9 @@ void rt_hw_board_init()
#endif
#ifdef RT_USING_PWM
rt_hw_pwm_init();
#endif
#ifdef RT_USING_I2C
rt_hw_i2c_init();
#endif
/* Call components board initial (use INIT_BOARD_EXPORT()) */
#ifdef RT_USING_COMPONENTS_INIT

4
bsp/tm4c123bsp/board/board.h
View File

@ -47,6 +47,10 @@
#include "drv_spi.h"
#endif /* RT_USING_SPI*/
#ifdef RT_USING_I2C
#include "drv_i2c.h"
#endif /* RT_USING_I2C*/
#endif /*__BOARD_H__*/
/************************** end of file ******************/

6
bsp/tm4c123bsp/libraries/Drivers/SConscript
View File

@ -26,9 +26,9 @@ if GetDepend(['RT_USING_SPI']):
if GetDepend(['RT_USING_QSPI']):
src += ['drv_qspi.c']
if GetDepend(['RT_USING_I2C', 'RT_USING_I2C_BITOPS']):
if GetDepend('BSP_USING_I2C1') or GetDepend('BSP_USING_I2C2') or GetDepend('BSP_USING_I2C3') or GetDepend('BSP_USING_I2C4'):
src += ['drv_soft_i2c.c']
if GetDepend(['RT_USING_I2C']):
if GetDepend('BSP_USING_I2C0') or GetDepend('BSP_USING_I2C1') or GetDepend('BSP_USING_I2C2') or GetDepend('BSP_USING_I2C3'):
src += ['drv_i2c.c']
if GetDepend(['BSP_USING_ETH', 'RT_USING_LWIP']):
src += ['drv_eth.c']

93
bsp/tm4c123bsp/libraries/Drivers/config/i2c_config.h Normal file
View File

@ -0,0 +1,93 @@
/*
* Copyright (c) 2006-2024, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2024-01-20 wirano first version
*/
#ifndef __I2C_CONFIG_H__
#define __I2C_CONFIG_H__
#include <rtthread.h>
#ifdef __cplusplus
extern "C" {
#endif
#if defined(BSP_I2C0_CLK_100)
#define I2C0_CLK 100000
#elif defined(BSP_I2C0_CLK_400)
#define I2C0_CLK 400000
#endif
#if defined(BSP_I2C1_CLK_100)
#define I2C1_CLK 100000
#elif defined(BSP_I2C1_CLK_400)
#define I2C1_CLK 400000
#endif
#if defined(BSP_I2C2_CLK_100)
#define I2C2_CLK 100000
#elif defined(BSP_I2C2_CLK_400)
#define I2C2_CLK 400000
#endif
#if defined(BSP_I2C3_CLK_100)
#define I2C3_CLK 100000
#elif defined(BSP_I2C3_CLK_400)
#define I2C3_CLK 400000
#endif
#ifdef BSP_USING_I2C0
#ifndef I2C0_BUS_CONFIG
#define I2C0_BUS_CONFIG \
{ \
.base = I2C0_BASE, \
.bus_name = "i2c0", \
.clk_freq = I2C0_CLK, \
}
#endif /* I2C0_BUS_CONFIG */
#endif /* BSP_USING_I2C0 */
#ifdef BSP_USING_I2C1
#ifndef I2C1_BUS_CONFIG
#define I2C1_BUS_CONFIG \
{ \
.base = I2C1_BASE, \
.bus_name = "i2c1", \
.clk_freq = I2C1_CLK, \
}
#endif /* I2C1_BUS_CONFIG */
#endif /* BSP_USING_I2C1 */
#ifdef BSP_USING_I2C2
#ifndef I2C2_BUS_CONFIG
#define I2C2_BUS_CONFIG \
{ \
.base = I2C2_BASE, \
.bus_name = "i2c2", \
.clk_freq = I2C2_CLK, \
}
#endif /* I2C2_BUS_CONFIG */
#endif /* BSP_USING_I2C2 */
#ifdef BSP_USING_I2C3
#ifndef I2C3_BUS_CONFIG
#define I2C3_BUS_CONFIG \
{ \
.base = I2C3_BASE, \
.bus_name = "i2c3", \
.clk_freq = I2C3_CLK, \
}
#endif /* I2C3_BUS_CONFIG */
#endif /* BSP_USING_I2C3 */
#ifdef __cplusplus
}
#endif
#endif //__I2C_CONFIG_H__

226
bsp/tm4c123bsp/libraries/Drivers/drv_i2c.c Normal file
View File

@ -0,0 +1,226 @@
/*
* Copyright (c) 2006-2024, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2024-01-20 wirano first version
*/
#include <rtthread.h>
#include <rtdevice.h>
#include <rtdbg.h>
#ifdef BSP_USING_I2C
#if defined(BSP_USING_I2C0) || defined(BSP_USING_I2C1) || defined(BSP_USING_I2C2) || defined(BSP_USING_I2C3)
#include "drv_i2c.h"
#include "inc/hw_memmap.h"
#include <stdbool.h>
#include "i2c_config.h"
#include "driverlib/rom.h"
#include "driverlib/sysctl.h"
#include "driverlib/pin_map.h"
#include "driverlib/gpio.h"
#include "driverlib/i2c.h"
enum {
#ifdef BSP_USING_I2C0
I2C0_INDEX,
#endif
#ifdef BSP_USING_I2C1
I2C1_INDEX,
#endif
#ifdef BSP_USING_I2C2
I2C2_INDEX,
#endif
#ifdef BSP_USING_I2C3
I2C3_INDEX,
#endif
};
static struct tm4c123_i2c tm4c123_i2cs[] =
{
#ifdef BSP_USING_I2C0
I2C0_BUS_CONFIG,
#endif
#ifdef BSP_USING_I2C1
I2C1_BUS_CONFIG,
#endif
#ifdef BSP_USING_I2C2
I2C2_BUS_CONFIG,
#endif
#ifdef BSP_USING_I2C3
I2C3_BUS_CONFIG,
#endif
};
static rt_ssize_t tm4c123_i2c_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg msgs[], rt_uint32_t num);
struct rt_i2c_bus_device_ops tm4c123_i2c_ops =
{
tm4c123_i2c_xfer,
RT_NULL,
RT_NULL
};
static rt_ssize_t tm4c123_i2c_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg msgs[], rt_uint32_t num) {
RT_ASSERT(bus != RT_NULL);
RT_ASSERT(msgs != RT_NULL);
struct rt_i2c_msg *msg;
struct tm4c123_i2c *i2c_info = (struct tm4c123_i2c *) bus;
rt_err_t ret = -RT_ERROR;
rt_uint32_t i;
for (i = 0; i < num; i++) {
msg = &msgs[i];
if (msg->flags & RT_I2C_ADDR_10BIT) {
LOG_E("does not support 10bits address!\n");
}
if (msg->flags & RT_I2C_RD) {
rt_uint8_t *data = msg->buf;
ROM_I2CMasterSlaveAddrSet(i2c_info->base, msg->addr, true);
if (msg->flags & RT_I2C_NO_START) {
ROM_I2CMasterControl(i2c_info->base, I2C_MASTER_CMD_BURST_RECEIVE_CONT);
while (ROM_I2CMasterBusy(i2c_info->base));
*data = ROM_I2CMasterDataGet(i2c_info->base);
} else {
ROM_I2CMasterControl(i2c_info->base, I2C_MASTER_CMD_BURST_RECEIVE_START);
while (ROM_I2CMasterBusy(i2c_info->base));
*data = ROM_I2CMasterDataGet(i2c_info->base);
}
if (msg->len > 1) {
data++;
for (int j = 1; j < msg->len - 1; ++j) {
ROM_I2CMasterControl(i2c_info->base, I2C_MASTER_CMD_BURST_RECEIVE_CONT);
while (ROM_I2CMasterBusy(i2c_info->base));
*data = ROM_I2CMasterDataGet(i2c_info->base);
data++;
}
if (msg->flags & RT_I2C_NO_STOP) {
ROM_I2CMasterControl(i2c_info->base, I2C_MASTER_CMD_BURST_RECEIVE_CONT);
while (ROM_I2CMasterBusy(i2c_info->base));
*data = ROM_I2CMasterDataGet(i2c_info->base);
} else {
ROM_I2CMasterControl(i2c_info->base, I2C_MASTER_CMD_BURST_RECEIVE_FINISH);
while (ROM_I2CMasterBusy(i2c_info->base));
*data = ROM_I2CMasterDataGet(i2c_info->base);
}
}
} else {
rt_uint8_t *data = msg->buf;
ROM_I2CMasterSlaveAddrSet(i2c_info->base, msg->addr, false);
// use single send when data len = 1
if (msg->len == 1) {
if (msg->flags & RT_I2C_NO_START) {
ROM_I2CMasterDataPut(i2c_info->base, *data);
ROM_I2CMasterControl(i2c_info->base, I2C_MASTER_CMD_BURST_SEND_CONT);
} else if (msg->flags & RT_I2C_NO_STOP) {
ROM_I2CMasterDataPut(i2c_info->base, *data);
ROM_I2CMasterControl(i2c_info->base, I2C_MASTER_CMD_BURST_SEND_CONT);
} else {
ROM_I2CMasterControl(i2c_info->base, I2C_MASTER_CMD_SINGLE_SEND);
ROM_I2CMasterDataPut(i2c_info->base, *data);
}
while (ROM_I2CMasterBusy(i2c_info->base));
// otherwise use burst send
} else {
if (msg->flags & RT_I2C_NO_START) {
ROM_I2CMasterDataPut(i2c_info->base, *data);
ROM_I2CMasterControl(i2c_info->base, I2C_MASTER_CMD_BURST_SEND_CONT);
while (ROM_I2CMasterBusy(i2c_info->base));
} else {
ROM_I2CMasterDataPut(i2c_info->base, *data);
ROM_I2CMasterControl(i2c_info->base, I2C_MASTER_CMD_BURST_SEND_START);
while (ROM_I2CMasterBusy(i2c_info->base));
}
data++;
for (int j = 1; j < msg->len - 1; ++j) {
ROM_I2CMasterDataPut(i2c_info->base, *data);
ROM_I2CMasterControl(i2c_info->base, I2C_MASTER_CMD_BURST_SEND_CONT);
while (ROM_I2CMasterBusy(i2c_info->base));
data++;
}
if (msg->flags & RT_I2C_NO_STOP) {
ROM_I2CMasterDataPut(i2c_info->base, *data);
ROM_I2CMasterControl(i2c_info->base, I2C_MASTER_CMD_BURST_SEND_CONT);
} else {
ROM_I2CMasterDataPut(i2c_info->base, *data);
ROM_I2CMasterControl(i2c_info->base, I2C_MASTER_CMD_BURST_SEND_FINISH);
}
while (ROM_I2CMasterBusy(i2c_info->base));
}
}
}
ret = i;
return ret;
}
int rt_hw_i2c_init(void) {
rt_err_t ret = RT_EOK;
for (uint32_t i = 0; i < sizeof(tm4c123_i2cs) / sizeof(tm4c123_i2cs[0]); i++) {
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOB);
ROM_GPIOPinConfigure(GPIO_PB2_I2C0SCL);
ROM_GPIOPinConfigure(GPIO_PB3_I2C0SDA);
ROM_GPIOPinTypeI2CSCL(GPIO_PORTB_BASE, GPIO_PIN_2);
ROM_GPIOPinTypeI2C(GPIO_PORTB_BASE, GPIO_PIN_3);
ROM_SysCtlPeripheralDisable(SYSCTL_PERIPH_I2C0);
ROM_SysCtlPeripheralReset(SYSCTL_PERIPH_I2C0);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_I2C0);
while (!SysCtlPeripheralReady(SYSCTL_PERIPH_I2C0));
// timeout:5ms
ROM_I2CMasterTimeoutSet(I2C0_BASE, 0x7d);
if (tm4c123_i2cs[i].clk_freq == 400000) {
ROM_I2CMasterInitExpClk(tm4c123_i2cs[i].base, ROM_SysCtlClockGet(), RT_TRUE);
} else {
ROM_I2CMasterInitExpClk(tm4c123_i2cs[i].base, ROM_SysCtlClockGet(), RT_FALSE);
}
ROM_I2CMasterEnable(tm4c123_i2cs[i].base);
tm4c123_i2cs[i].bus.ops = &tm4c123_i2c_ops;
ret = rt_i2c_bus_device_register(&tm4c123_i2cs[i].bus, tm4c123_i2cs[i].bus_name);
if (ret != RT_EOK) {
LOG_E("rt i2c device %s register failed, status=%d\n", tm4c123_i2cs[i].bus_name, ret);
}
}
return ret;
}
INIT_DEVICE_EXPORT(rt_hw_i2c_init);
#endif /* BSP_USING_I2C1 || BSP_USING_I2C2 || BSP_USING_I2C3 || BSP_USING_I2C4 */
#endif /* BSP_USING_I2C */

31
bsp/tm4c123bsp/libraries/Drivers/drv_i2c.h Normal file
View File

@ -0,0 +1,31 @@
/*
* Copyright (c) 2006-2024, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2024-01-20 wirano first version
*/
#ifndef __DRV_I2C_H__
#define __DRV_I2C_H__
#include <stdint.h>
#include <rtdevice.h>
#include <rthw.h>
struct tm4c123_i2c
{
struct rt_i2c_bus_device bus;
uint32_t base;
char *bus_name;
uint32_t clk_freq;
};
int rt_hw_i2c_init(void);
#endif /* __DRV_I2C_H__ */

3
bsp/tm4c123bsp/libraries/TivaWare_C_series/SConscript
View File

@ -20,7 +20,8 @@ tm4c123_driverlib/src/gpio.c
if GetDepend(['RT_USING_SERIAL']):
src += ['tm4c123_driverlib/src/uart.c']
#if GetDepend(['RT_USING_I2C']):
if GetDepend(['RT_USING_I2C']):
src += ['tm4c123_driverlib/src/i2c.c']
if GetDepend(['RT_USING_SPI']):