Merge pull request #5470 from supperthomas/dd_master
[bsp/stm32] add sdram for openmv
This commit is contained in:
guo
GitHub
commit
5e24acf7fa
|
|
@ -38,7 +38,8 @@ OPENMV4-H7-PLUS 是 OPENMV公司推出的一款针对 STM32H7系列设计的 Cor
|
|||
| **片上外设** | **支持情况** | **备注** |
|
||||
| :----------------- | :----------: | :------------------------------------- |
|
||||
| GPIO | 支持 | |
|
||||
| UART | 支持 | UART1 （console） |
|
||||
| UART | 支持 | UART1(PB14 TX)(PB15 RX) |
|
||||
| SDRAM | 支持 | IS42S32800 BANK1 |
|
||||
|
||||
## 使用说明
|
||||
|
||||
|
|
|
|||
|
|
@ -12,7 +12,6 @@
|
|||
#include <rtdevice.h>
|
||||
#include <board.h>
|
||||
|
||||
/* defined the LED2 pin: PB7 */
|
||||
#define LED1_PIN GET_PIN(C, 0)
|
||||
|
||||
int main(void)
|
||||
|
|
|
|||
|
|
@ -50,7 +50,7 @@
|
|||
/* #define HAL_NOR_MODULE_ENABLED */
|
||||
/* #define HAL_OTFDEC_MODULE_ENABLED */
|
||||
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||
#define HAL_SDRAM_MODULE_ENABLED
|
||||
/* #define HAL_HASH_MODULE_ENABLED */
|
||||
/* #define HAL_HRTIM_MODULE_ENABLED */
|
||||
/* #define HAL_HSEM_MODULE_ENABLED */
|
||||
|
|
@ -168,7 +168,7 @@
|
|||
#define TICK_INT_PRIORITY (15UL) /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0
|
||||
#define USE_SD_TRANSCEIVER 0U /*!< use uSD Transceiver */
|
||||
#define USE_SPI_CRC 0U /*!< use CRC in SPI */
|
||||
#define USE_SPI_CRC 0U /*!< use CRC in SPI */
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||
|
|
|
|||
|
|
@ -42,6 +42,8 @@
|
|||
|
||||
UART_HandleTypeDef huart1;
|
||||
|
||||
SDRAM_HandleTypeDef hsdram1;
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
|
@ -50,6 +52,7 @@ UART_HandleTypeDef huart1;
|
|||
void SystemClock_Config(void);
|
||||
static void MX_GPIO_Init(void);
|
||||
static void MX_USART1_UART_Init(void);
|
||||
static void MX_FMC_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
|
@ -88,6 +91,7 @@ int main(void)
|
|||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
MX_USART1_UART_Init();
|
||||
MX_FMC_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
|
@ -117,7 +121,7 @@ void SystemClock_Config(void)
|
|||
HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);
|
||||
/** Configure the main internal regulator output voltage
|
||||
*/
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0);
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
|
||||
while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
|
|
@ -127,12 +131,12 @@ void SystemClock_Config(void)
|
|||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 1;
|
||||
RCC_OscInitStruct.PLL.PLLN = 80;
|
||||
RCC_OscInitStruct.PLL.PLLM = 3;
|
||||
RCC_OscInitStruct.PLL.PLLN = 200;
|
||||
RCC_OscInitStruct.PLL.PLLP = 2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 2;
|
||||
RCC_OscInitStruct.PLL.PLLR = 2;
|
||||
RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_3;
|
||||
RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2;
|
||||
RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
|
||||
RCC_OscInitStruct.PLL.PLLFRACN = 0;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
|
|
@ -152,7 +156,7 @@ void SystemClock_Config(void)
|
|||
RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
|
||||
RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
|
@ -206,6 +210,53 @@ static void MX_USART1_UART_Init(void)
|
|||
|
||||
}
|
||||
|
||||
/* FMC initialization function */
|
||||
static void MX_FMC_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN FMC_Init 0 */
|
||||
|
||||
/* USER CODE END FMC_Init 0 */
|
||||
|
||||
FMC_SDRAM_TimingTypeDef SdramTiming = {0};
|
||||
|
||||
/* USER CODE BEGIN FMC_Init 1 */
|
||||
|
||||
/* USER CODE END FMC_Init 1 */
|
||||
|
||||
/** Perform the SDRAM1 memory initialization sequence
|
||||
*/
|
||||
hsdram1.Instance = FMC_SDRAM_DEVICE;
|
||||
/* hsdram1.Init */
|
||||
hsdram1.Init.SDBank = FMC_SDRAM_BANK1;
|
||||
hsdram1.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_9;
|
||||
hsdram1.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_12;
|
||||
hsdram1.Init.MemoryDataWidth = FMC_SDRAM_MEM_BUS_WIDTH_32;
|
||||
hsdram1.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4;
|
||||
hsdram1.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_2;
|
||||
hsdram1.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE;
|
||||
hsdram1.Init.SDClockPeriod = FMC_SDRAM_CLOCK_PERIOD_2;
|
||||
hsdram1.Init.ReadBurst = FMC_SDRAM_RBURST_DISABLE;
|
||||
hsdram1.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0;
|
||||
/* SdramTiming */
|
||||
SdramTiming.LoadToActiveDelay = 2;
|
||||
SdramTiming.ExitSelfRefreshDelay = 7;
|
||||
SdramTiming.SelfRefreshTime = 5;
|
||||
SdramTiming.RowCycleDelay = 6;
|
||||
SdramTiming.WriteRecoveryTime = 3;
|
||||
SdramTiming.RPDelay = 2;
|
||||
SdramTiming.RCDDelay = 2;
|
||||
|
||||
if (HAL_SDRAM_Init(&hsdram1, &SdramTiming) != HAL_OK)
|
||||
{
|
||||
Error_Handler( );
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN FMC_Init 2 */
|
||||
|
||||
/* USER CODE END FMC_Init 2 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief GPIO Initialization Function
|
||||
* @param None
|
||||
|
|
@ -216,7 +267,12 @@ static void MX_GPIO_Init(void)
|
|||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOI_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOH_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOF_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
|
||||
|
|
|
|||
|
|
@ -21,7 +21,9 @@
|
|||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
/* USER CODE BEGIN Includes */
|
||||
#ifdef __RTTHREAD__
|
||||
#include "drv_common.h"
|
||||
#endif
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
|
|
@ -150,6 +152,273 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
|||
|
||||
}
|
||||
|
||||
static uint32_t FMC_Initialized = 0;
|
||||
|
||||
static void HAL_FMC_MspInit(void){
|
||||
/* USER CODE BEGIN FMC_MspInit 0 */
|
||||
|
||||
/* USER CODE END FMC_MspInit 0 */
|
||||
GPIO_InitTypeDef GPIO_InitStruct ={0};
|
||||
if (FMC_Initialized) {
|
||||
return;
|
||||
}
|
||||
FMC_Initialized = 1;
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
|
||||
|
||||
/** Initializes the peripherals clock
|
||||
*/
|
||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_FMC;
|
||||
PeriphClkInitStruct.FmcClockSelection = RCC_FMCCLKSOURCE_D1HCLK;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_FMC_CLK_ENABLE();
|
||||
|
||||
/** FMC GPIO Configuration
|
||||
PE1 ------> FMC_NBL1
|
||||
PE0 ------> FMC_NBL0
|
||||
PG15 ------> FMC_SDNCAS
|
||||
PD0 ------> FMC_D2
|
||||
PI7 ------> FMC_D29
|
||||
PI6 ------> FMC_D28
|
||||
PI5 ------> FMC_NBL3
|
||||
PD1 ------> FMC_D3
|
||||
PI3 ------> FMC_D27
|
||||
PI2 ------> FMC_D26
|
||||
PI9 ------> FMC_D30
|
||||
PI4 ------> FMC_NBL2
|
||||
PH15 ------> FMC_D23
|
||||
PI1 ------> FMC_D25
|
||||
PF0 ------> FMC_A0
|
||||
PI10 ------> FMC_D31
|
||||
PH13 ------> FMC_D21
|
||||
PH14 ------> FMC_D22
|
||||
PI0 ------> FMC_D24
|
||||
PF2 ------> FMC_A2
|
||||
PF1 ------> FMC_A1
|
||||
PG8 ------> FMC_SDCLK
|
||||
PF3 ------> FMC_A3
|
||||
PF4 ------> FMC_A4
|
||||
PH5 ------> FMC_SDNWE
|
||||
PF5 ------> FMC_A5
|
||||
PH12 ------> FMC_D20
|
||||
PG5 ------> FMC_BA1
|
||||
PG4 ------> FMC_BA0
|
||||
PH11 ------> FMC_D19
|
||||
PH10 ------> FMC_D18
|
||||
PD15 ------> FMC_D1
|
||||
PG1 ------> FMC_A11
|
||||
PH8 ------> FMC_D16
|
||||
PH9 ------> FMC_D17
|
||||
PD14 ------> FMC_D0
|
||||
PC4 ------> FMC_SDNE0
|
||||
PF13 ------> FMC_A7
|
||||
PG0 ------> FMC_A10
|
||||
PE13 ------> FMC_D10
|
||||
PD10 ------> FMC_D15
|
||||
PC5 ------> FMC_SDCKE0
|
||||
PF12 ------> FMC_A6
|
||||
PF15 ------> FMC_A9
|
||||
PE8 ------> FMC_D5
|
||||
PE9 ------> FMC_D6
|
||||
PE11 ------> FMC_D8
|
||||
PE14 ------> FMC_D11
|
||||
PD9 ------> FMC_D14
|
||||
PD8 ------> FMC_D13
|
||||
PF11 ------> FMC_SDNRAS
|
||||
PF14 ------> FMC_A8
|
||||
PE7 ------> FMC_D4
|
||||
PE10 ------> FMC_D7
|
||||
PE12 ------> FMC_D9
|
||||
PE15 ------> FMC_D12
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_0|GPIO_PIN_13|GPIO_PIN_8
|
||||
|GPIO_PIN_9|GPIO_PIN_11|GPIO_PIN_14|GPIO_PIN_7
|
||||
|GPIO_PIN_10|GPIO_PIN_12|GPIO_PIN_15;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
|
||||
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_15|GPIO_PIN_8|GPIO_PIN_5|GPIO_PIN_4
|
||||
|GPIO_PIN_1|GPIO_PIN_0;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
|
||||
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_15|GPIO_PIN_14
|
||||
|GPIO_PIN_10|GPIO_PIN_9|GPIO_PIN_8;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
|
||||
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_6|GPIO_PIN_5|GPIO_PIN_3
|
||||
|GPIO_PIN_2|GPIO_PIN_9|GPIO_PIN_4|GPIO_PIN_1
|
||||
|GPIO_PIN_10|GPIO_PIN_0;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
|
||||
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_15|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_5
|
||||
|GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_8
|
||||
|GPIO_PIN_9;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
|
||||
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_2|GPIO_PIN_1|GPIO_PIN_3
|
||||
|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_13|GPIO_PIN_12
|
||||
|GPIO_PIN_15|GPIO_PIN_11|GPIO_PIN_14;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
|
||||
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN FMC_MspInit 1 */
|
||||
|
||||
/* USER CODE END FMC_MspInit 1 */
|
||||
}
|
||||
|
||||
void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef* hsdram){
|
||||
/* USER CODE BEGIN SDRAM_MspInit 0 */
|
||||
|
||||
/* USER CODE END SDRAM_MspInit 0 */
|
||||
HAL_FMC_MspInit();
|
||||
/* USER CODE BEGIN SDRAM_MspInit 1 */
|
||||
|
||||
/* USER CODE END SDRAM_MspInit 1 */
|
||||
}
|
||||
|
||||
static uint32_t FMC_DeInitialized = 0;
|
||||
|
||||
static void HAL_FMC_MspDeInit(void){
|
||||
/* USER CODE BEGIN FMC_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END FMC_MspDeInit 0 */
|
||||
if (FMC_DeInitialized) {
|
||||
return;
|
||||
}
|
||||
FMC_DeInitialized = 1;
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_FMC_CLK_DISABLE();
|
||||
|
||||
/** FMC GPIO Configuration
|
||||
PE1 ------> FMC_NBL1
|
||||
PE0 ------> FMC_NBL0
|
||||
PG15 ------> FMC_SDNCAS
|
||||
PD0 ------> FMC_D2
|
||||
PI7 ------> FMC_D29
|
||||
PI6 ------> FMC_D28
|
||||
PI5 ------> FMC_NBL3
|
||||
PD1 ------> FMC_D3
|
||||
PI3 ------> FMC_D27
|
||||
PI2 ------> FMC_D26
|
||||
PI9 ------> FMC_D30
|
||||
PI4 ------> FMC_NBL2
|
||||
PH15 ------> FMC_D23
|
||||
PI1 ------> FMC_D25
|
||||
PF0 ------> FMC_A0
|
||||
PI10 ------> FMC_D31
|
||||
PH13 ------> FMC_D21
|
||||
PH14 ------> FMC_D22
|
||||
PI0 ------> FMC_D24
|
||||
PF2 ------> FMC_A2
|
||||
PF1 ------> FMC_A1
|
||||
PG8 ------> FMC_SDCLK
|
||||
PF3 ------> FMC_A3
|
||||
PF4 ------> FMC_A4
|
||||
PH5 ------> FMC_SDNWE
|
||||
PF5 ------> FMC_A5
|
||||
PH12 ------> FMC_D20
|
||||
PG5 ------> FMC_BA1
|
||||
PG4 ------> FMC_BA0
|
||||
PH11 ------> FMC_D19
|
||||
PH10 ------> FMC_D18
|
||||
PD15 ------> FMC_D1
|
||||
PG1 ------> FMC_A11
|
||||
PH8 ------> FMC_D16
|
||||
PH9 ------> FMC_D17
|
||||
PD14 ------> FMC_D0
|
||||
PC4 ------> FMC_SDNE0
|
||||
PF13 ------> FMC_A7
|
||||
PG0 ------> FMC_A10
|
||||
PE13 ------> FMC_D10
|
||||
PD10 ------> FMC_D15
|
||||
PC5 ------> FMC_SDCKE0
|
||||
PF12 ------> FMC_A6
|
||||
PF15 ------> FMC_A9
|
||||
PE8 ------> FMC_D5
|
||||
PE9 ------> FMC_D6
|
||||
PE11 ------> FMC_D8
|
||||
PE14 ------> FMC_D11
|
||||
PD9 ------> FMC_D14
|
||||
PD8 ------> FMC_D13
|
||||
PF11 ------> FMC_SDNRAS
|
||||
PF14 ------> FMC_A8
|
||||
PE7 ------> FMC_D4
|
||||
PE10 ------> FMC_D7
|
||||
PE12 ------> FMC_D9
|
||||
PE15 ------> FMC_D12
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOE, GPIO_PIN_1|GPIO_PIN_0|GPIO_PIN_13|GPIO_PIN_8
|
||||
|GPIO_PIN_9|GPIO_PIN_11|GPIO_PIN_14|GPIO_PIN_7
|
||||
|GPIO_PIN_10|GPIO_PIN_12|GPIO_PIN_15);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOG, GPIO_PIN_15|GPIO_PIN_8|GPIO_PIN_5|GPIO_PIN_4
|
||||
|GPIO_PIN_1|GPIO_PIN_0);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_15|GPIO_PIN_14
|
||||
|GPIO_PIN_10|GPIO_PIN_9|GPIO_PIN_8);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOI, GPIO_PIN_7|GPIO_PIN_6|GPIO_PIN_5|GPIO_PIN_3
|
||||
|GPIO_PIN_2|GPIO_PIN_9|GPIO_PIN_4|GPIO_PIN_1
|
||||
|GPIO_PIN_10|GPIO_PIN_0);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOH, GPIO_PIN_15|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_5
|
||||
|GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_8
|
||||
|GPIO_PIN_9);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_2|GPIO_PIN_1|GPIO_PIN_3
|
||||
|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_13|GPIO_PIN_12
|
||||
|GPIO_PIN_15|GPIO_PIN_11|GPIO_PIN_14);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_4|GPIO_PIN_5);
|
||||
|
||||
/* USER CODE BEGIN FMC_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END FMC_MspDeInit 1 */
|
||||
}
|
||||
|
||||
void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef* hsdram){
|
||||
/* USER CODE BEGIN SDRAM_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END SDRAM_MspDeInit 0 */
|
||||
HAL_FMC_MspDeInit();
|
||||
/* USER CODE BEGIN SDRAM_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END SDRAM_MspDeInit 1 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
|
|
|||
|
|
@ -1,23 +1,93 @@
|
|||
#MicroXplorer Configuration settings - do not modify
|
||||
FMC.BankMapConfig=FMC_SWAPBMAP_DISABLE
|
||||
FMC.CASLatency1=FMC_SDRAM_CAS_LATENCY_2
|
||||
FMC.ColumnBitsNumber1=FMC_SDRAM_COLUMN_BITS_NUM_9
|
||||
FMC.ExitSelfRefreshDelay1=7
|
||||
FMC.IPParameters=ColumnBitsNumber1,CASLatency1,SDClockPeriod1,LoadToActiveDelay1,RCDDelay1,ExitSelfRefreshDelay1,SelfRefreshTime1,RowCycleDelay1,RPDelay1,BankMapConfig,WriteRecoveryTime1,ReadBurst1
|
||||
FMC.LoadToActiveDelay1=2
|
||||
FMC.RCDDelay1=2
|
||||
FMC.RPDelay1=2
|
||||
FMC.ReadBurst1=FMC_SDRAM_RBURST_ENABLE
|
||||
FMC.RowCycleDelay1=6
|
||||
FMC.SDClockPeriod1=FMC_SDRAM_CLOCK_PERIOD_2
|
||||
FMC.SelfRefreshTime1=5
|
||||
FMC.WriteRecoveryTime1=3
|
||||
File.Version=6
|
||||
GPIO.groupedBy=
|
||||
GPIO.groupedBy=Group By Peripherals
|
||||
KeepUserPlacement=false
|
||||
Mcu.Family=STM32H7
|
||||
Mcu.IP0=CORTEX_M7
|
||||
Mcu.IP1=NVIC
|
||||
Mcu.IP2=RCC
|
||||
Mcu.IP3=SYS
|
||||
Mcu.IP4=USART1
|
||||
Mcu.IPNb=5
|
||||
Mcu.IP1=FMC
|
||||
Mcu.IP2=NVIC
|
||||
Mcu.IP3=RCC
|
||||
Mcu.IP4=SYS
|
||||
Mcu.IP5=USART1
|
||||
Mcu.IPNb=6
|
||||
Mcu.Name=STM32H743IIKx
|
||||
Mcu.Package=UFBGA176
|
||||
Mcu.Pin0=PH0-OSC_IN (PH0)
|
||||
Mcu.Pin1=PH1-OSC_OUT (PH1)
|
||||
Mcu.Pin2=PC0
|
||||
Mcu.Pin3=PB14
|
||||
Mcu.Pin4=PB15
|
||||
Mcu.Pin5=VP_SYS_VS_Systick
|
||||
Mcu.PinsNb=6
|
||||
Mcu.Pin0=PE1
|
||||
Mcu.Pin1=PE0
|
||||
Mcu.Pin10=PI9
|
||||
Mcu.Pin11=PI4
|
||||
Mcu.Pin12=PH15
|
||||
Mcu.Pin13=PI1
|
||||
Mcu.Pin14=PF0
|
||||
Mcu.Pin15=PI10
|
||||
Mcu.Pin16=PH13
|
||||
Mcu.Pin17=PH14
|
||||
Mcu.Pin18=PI0
|
||||
Mcu.Pin19=PH0-OSC_IN (PH0)
|
||||
Mcu.Pin2=PG15
|
||||
Mcu.Pin20=PH1-OSC_OUT (PH1)
|
||||
Mcu.Pin21=PF2
|
||||
Mcu.Pin22=PF1
|
||||
Mcu.Pin23=PG8
|
||||
Mcu.Pin24=PF3
|
||||
Mcu.Pin25=PF4
|
||||
Mcu.Pin26=PH5
|
||||
Mcu.Pin27=PF5
|
||||
Mcu.Pin28=PH12
|
||||
Mcu.Pin29=PG5
|
||||
Mcu.Pin3=PD0
|
||||
Mcu.Pin30=PG4
|
||||
Mcu.Pin31=PH11
|
||||
Mcu.Pin32=PH10
|
||||
Mcu.Pin33=PD15
|
||||
Mcu.Pin34=PC0
|
||||
Mcu.Pin35=PG1
|
||||
Mcu.Pin36=PH8
|
||||
Mcu.Pin37=PH9
|
||||
Mcu.Pin38=PD14
|
||||
Mcu.Pin39=PC4
|
||||
Mcu.Pin4=PI7
|
||||
Mcu.Pin40=PF13
|
||||
Mcu.Pin41=PG0
|
||||
Mcu.Pin42=PE13
|
||||
Mcu.Pin43=PD10
|
||||
Mcu.Pin44=PC5
|
||||
Mcu.Pin45=PF12
|
||||
Mcu.Pin46=PF15
|
||||
Mcu.Pin47=PE8
|
||||
Mcu.Pin48=PE9
|
||||
Mcu.Pin49=PE11
|
||||
Mcu.Pin5=PI6
|
||||
Mcu.Pin50=PE14
|
||||
Mcu.Pin51=PD9
|
||||
Mcu.Pin52=PD8
|
||||
Mcu.Pin53=PF11
|
||||
Mcu.Pin54=PF14
|
||||
Mcu.Pin55=PE7
|
||||
Mcu.Pin56=PE10
|
||||
Mcu.Pin57=PE12
|
||||
Mcu.Pin58=PE15
|
||||
Mcu.Pin59=PB14
|
||||
Mcu.Pin6=PI5
|
||||
Mcu.Pin60=PB15
|
||||
Mcu.Pin61=VP_SYS_VS_Systick
|
||||
Mcu.Pin7=PD1
|
||||
Mcu.Pin8=PI3
|
||||
Mcu.Pin9=PI2
|
||||
Mcu.PinsNb=62
|
||||
Mcu.ThirdPartyNb=0
|
||||
Mcu.UserConstants=
|
||||
Mcu.UserName=STM32H743IIKx
|
||||
|
|
@ -44,10 +114,182 @@ PC0.GPIOParameters=GPIO_Label
|
|||
PC0.GPIO_Label=LED_RED
|
||||
PC0.Locked=true
|
||||
PC0.Signal=GPIO_Output
|
||||
PC4.GPIOParameters=GPIO_PuPd
|
||||
PC4.GPIO_PuPd=GPIO_PULLUP
|
||||
PC4.Locked=true
|
||||
PC4.Mode=SdramChipSelect1_1
|
||||
PC4.Signal=FMC_SDNE0
|
||||
PC5.GPIOParameters=GPIO_PuPd
|
||||
PC5.GPIO_PuPd=GPIO_PULLUP
|
||||
PC5.Locked=true
|
||||
PC5.Mode=SdramChipSelect1_1
|
||||
PC5.Signal=FMC_SDCKE0
|
||||
PD0.GPIOParameters=GPIO_PuPd
|
||||
PD0.GPIO_PuPd=GPIO_PULLUP
|
||||
PD0.Signal=FMC_D2_DA2
|
||||
PD1.GPIOParameters=GPIO_PuPd
|
||||
PD1.GPIO_PuPd=GPIO_PULLUP
|
||||
PD1.Signal=FMC_D3_DA3
|
||||
PD10.GPIOParameters=GPIO_PuPd
|
||||
PD10.GPIO_PuPd=GPIO_PULLUP
|
||||
PD10.Signal=FMC_D15_DA15
|
||||
PD14.GPIOParameters=GPIO_PuPd
|
||||
PD14.GPIO_PuPd=GPIO_PULLUP
|
||||
PD14.Signal=FMC_D0_DA0
|
||||
PD15.GPIOParameters=GPIO_PuPd
|
||||
PD15.GPIO_PuPd=GPIO_PULLUP
|
||||
PD15.Signal=FMC_D1_DA1
|
||||
PD8.GPIOParameters=GPIO_PuPd
|
||||
PD8.GPIO_PuPd=GPIO_PULLUP
|
||||
PD8.Signal=FMC_D13_DA13
|
||||
PD9.GPIOParameters=GPIO_PuPd
|
||||
PD9.GPIO_PuPd=GPIO_PULLUP
|
||||
PD9.Signal=FMC_D14_DA14
|
||||
PE0.GPIOParameters=GPIO_PuPd
|
||||
PE0.GPIO_PuPd=GPIO_PULLUP
|
||||
PE0.Signal=FMC_NBL0
|
||||
PE1.GPIOParameters=GPIO_PuPd
|
||||
PE1.GPIO_PuPd=GPIO_PULLUP
|
||||
PE1.Signal=FMC_NBL1
|
||||
PE10.GPIOParameters=GPIO_PuPd
|
||||
PE10.GPIO_PuPd=GPIO_PULLUP
|
||||
PE10.Signal=FMC_D7_DA7
|
||||
PE11.GPIOParameters=GPIO_PuPd
|
||||
PE11.GPIO_PuPd=GPIO_PULLUP
|
||||
PE11.Signal=FMC_D8_DA8
|
||||
PE12.GPIOParameters=GPIO_PuPd
|
||||
PE12.GPIO_PuPd=GPIO_PULLUP
|
||||
PE12.Signal=FMC_D9_DA9
|
||||
PE13.GPIOParameters=GPIO_PuPd
|
||||
PE13.GPIO_PuPd=GPIO_PULLUP
|
||||
PE13.Signal=FMC_D10_DA10
|
||||
PE14.GPIOParameters=GPIO_PuPd
|
||||
PE14.GPIO_PuPd=GPIO_PULLUP
|
||||
PE14.Signal=FMC_D11_DA11
|
||||
PE15.GPIOParameters=GPIO_PuPd
|
||||
PE15.GPIO_PuPd=GPIO_PULLUP
|
||||
PE15.Signal=FMC_D12_DA12
|
||||
PE7.GPIOParameters=GPIO_PuPd
|
||||
PE7.GPIO_PuPd=GPIO_PULLUP
|
||||
PE7.Signal=FMC_D4_DA4
|
||||
PE8.GPIOParameters=GPIO_PuPd
|
||||
PE8.GPIO_PuPd=GPIO_PULLUP
|
||||
PE8.Signal=FMC_D5_DA5
|
||||
PE9.GPIOParameters=GPIO_PuPd
|
||||
PE9.GPIO_PuPd=GPIO_PULLUP
|
||||
PE9.Signal=FMC_D6_DA6
|
||||
PF0.GPIOParameters=GPIO_PuPd
|
||||
PF0.GPIO_PuPd=GPIO_PULLUP
|
||||
PF0.Signal=FMC_A0
|
||||
PF1.GPIOParameters=GPIO_PuPd
|
||||
PF1.GPIO_PuPd=GPIO_PULLUP
|
||||
PF1.Signal=FMC_A1
|
||||
PF11.GPIOParameters=GPIO_PuPd
|
||||
PF11.GPIO_PuPd=GPIO_PULLUP
|
||||
PF11.Signal=FMC_SDNRAS
|
||||
PF12.GPIOParameters=GPIO_PuPd
|
||||
PF12.GPIO_PuPd=GPIO_PULLUP
|
||||
PF12.Signal=FMC_A6
|
||||
PF13.GPIOParameters=GPIO_PuPd
|
||||
PF13.GPIO_PuPd=GPIO_PULLUP
|
||||
PF13.Signal=FMC_A7
|
||||
PF14.GPIOParameters=GPIO_PuPd
|
||||
PF14.GPIO_PuPd=GPIO_PULLUP
|
||||
PF14.Signal=FMC_A8
|
||||
PF15.GPIOParameters=GPIO_PuPd
|
||||
PF15.GPIO_PuPd=GPIO_PULLUP
|
||||
PF15.Signal=FMC_A9
|
||||
PF2.GPIOParameters=GPIO_PuPd
|
||||
PF2.GPIO_PuPd=GPIO_PULLUP
|
||||
PF2.Signal=FMC_A2
|
||||
PF3.GPIOParameters=GPIO_PuPd
|
||||
PF3.GPIO_PuPd=GPIO_PULLUP
|
||||
PF3.Signal=FMC_A3
|
||||
PF4.GPIOParameters=GPIO_PuPd
|
||||
PF4.GPIO_PuPd=GPIO_PULLUP
|
||||
PF4.Signal=FMC_A4
|
||||
PF5.GPIOParameters=GPIO_PuPd
|
||||
PF5.GPIO_PuPd=GPIO_PULLUP
|
||||
PF5.Signal=FMC_A5
|
||||
PG0.GPIOParameters=GPIO_PuPd
|
||||
PG0.GPIO_PuPd=GPIO_PULLUP
|
||||
PG0.Signal=FMC_A10
|
||||
PG1.GPIOParameters=GPIO_PuPd
|
||||
PG1.GPIO_PuPd=GPIO_PULLUP
|
||||
PG1.Signal=FMC_A11
|
||||
PG15.GPIOParameters=GPIO_PuPd
|
||||
PG15.GPIO_PuPd=GPIO_PULLUP
|
||||
PG15.Signal=FMC_SDNCAS
|
||||
PG4.GPIOParameters=GPIO_PuPd
|
||||
PG4.GPIO_PuPd=GPIO_PULLUP
|
||||
PG4.Signal=FMC_A14_BA0
|
||||
PG5.GPIOParameters=GPIO_PuPd
|
||||
PG5.GPIO_PuPd=GPIO_PULLUP
|
||||
PG5.Signal=FMC_A15_BA1
|
||||
PG8.GPIOParameters=GPIO_PuPd
|
||||
PG8.GPIO_PuPd=GPIO_PULLUP
|
||||
PG8.Signal=FMC_SDCLK
|
||||
PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator
|
||||
PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
|
||||
PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator
|
||||
PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT
|
||||
PH10.GPIOParameters=GPIO_PuPd
|
||||
PH10.GPIO_PuPd=GPIO_PULLUP
|
||||
PH10.Signal=FMC_D18
|
||||
PH11.GPIOParameters=GPIO_PuPd
|
||||
PH11.GPIO_PuPd=GPIO_PULLUP
|
||||
PH11.Signal=FMC_D19
|
||||
PH12.GPIOParameters=GPIO_PuPd
|
||||
PH12.GPIO_PuPd=GPIO_PULLUP
|
||||
PH12.Signal=FMC_D20
|
||||
PH13.GPIOParameters=GPIO_PuPd
|
||||
PH13.GPIO_PuPd=GPIO_PULLUP
|
||||
PH13.Signal=FMC_D21
|
||||
PH14.GPIOParameters=GPIO_PuPd
|
||||
PH14.GPIO_PuPd=GPIO_PULLUP
|
||||
PH14.Signal=FMC_D22
|
||||
PH15.GPIOParameters=GPIO_PuPd
|
||||
PH15.GPIO_PuPd=GPIO_PULLUP
|
||||
PH15.Signal=FMC_D23
|
||||
PH5.GPIOParameters=GPIO_PuPd
|
||||
PH5.GPIO_PuPd=GPIO_PULLUP
|
||||
PH5.Signal=FMC_SDNWE
|
||||
PH8.GPIOParameters=GPIO_PuPd
|
||||
PH8.GPIO_PuPd=GPIO_PULLUP
|
||||
PH8.Signal=FMC_D16
|
||||
PH9.GPIOParameters=GPIO_PuPd
|
||||
PH9.GPIO_PuPd=GPIO_PULLUP
|
||||
PH9.Signal=FMC_D17
|
||||
PI0.GPIOParameters=GPIO_PuPd
|
||||
PI0.GPIO_PuPd=GPIO_PULLUP
|
||||
PI0.Signal=FMC_D24
|
||||
PI1.GPIOParameters=GPIO_PuPd
|
||||
PI1.GPIO_PuPd=GPIO_PULLUP
|
||||
PI1.Signal=FMC_D25
|
||||
PI10.GPIOParameters=GPIO_PuPd
|
||||
PI10.GPIO_PuPd=GPIO_PULLUP
|
||||
PI10.Signal=FMC_D31
|
||||
PI2.GPIOParameters=GPIO_PuPd
|
||||
PI2.GPIO_PuPd=GPIO_PULLUP
|
||||
PI2.Signal=FMC_D26
|
||||
PI3.GPIOParameters=GPIO_PuPd
|
||||
PI3.GPIO_PuPd=GPIO_PULLUP
|
||||
PI3.Signal=FMC_D27
|
||||
PI4.GPIOParameters=GPIO_PuPd
|
||||
PI4.GPIO_PuPd=GPIO_PULLUP
|
||||
PI4.Signal=FMC_NBL2
|
||||
PI5.GPIOParameters=GPIO_PuPd
|
||||
PI5.GPIO_PuPd=GPIO_PULLUP
|
||||
PI5.Signal=FMC_NBL3
|
||||
PI6.GPIOParameters=GPIO_PuPd
|
||||
PI6.GPIO_PuPd=GPIO_PULLUP
|
||||
PI6.Signal=FMC_D28
|
||||
PI7.GPIOParameters=GPIO_PuPd
|
||||
PI7.GPIO_PuPd=GPIO_PULLUP
|
||||
PI7.Signal=FMC_D29
|
||||
PI9.GPIOParameters=GPIO_PuPd
|
||||
PI9.GPIO_PuPd=GPIO_PULLUP
|
||||
PI9.Signal=FMC_D30
|
||||
PinOutPanel.CurrentBGAView=Top
|
||||
PinOutPanel.RotationAngle=0
|
||||
ProjectManager.AskForMigrate=true
|
||||
|
|
@ -64,7 +306,7 @@ ProjectManager.FreePins=false
|
|||
ProjectManager.HalAssertFull=false
|
||||
ProjectManager.HeapSize=0x200
|
||||
ProjectManager.KeepUserCode=true
|
||||
ProjectManager.LastFirmware=true
|
||||
ProjectManager.LastFirmware=false
|
||||
ProjectManager.LibraryCopy=1
|
||||
ProjectManager.MainLocation=Core/Src
|
||||
ProjectManager.NoMain=false
|
||||
|
|
@ -77,86 +319,194 @@ ProjectManager.StackSize=0x400
|
|||
ProjectManager.TargetToolchain=MDK-ARM V5.32
|
||||
ProjectManager.ToolChainLocation=
|
||||
ProjectManager.UnderRoot=false
|
||||
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true
|
||||
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_FMC_Init-FMC-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true
|
||||
RCC.ADCFreq_Value=24187500
|
||||
RCC.AHB12Freq_Value=240000000
|
||||
RCC.AHB4Freq_Value=240000000
|
||||
RCC.APB1Freq_Value=120000000
|
||||
RCC.APB2Freq_Value=120000000
|
||||
RCC.APB3Freq_Value=120000000
|
||||
RCC.APB4Freq_Value=120000000
|
||||
RCC.AXIClockFreq_Value=240000000
|
||||
RCC.AHB12Freq_Value=200000000
|
||||
RCC.AHB4Freq_Value=200000000
|
||||
RCC.APB1Freq_Value=100000000
|
||||
RCC.APB2Freq_Value=100000000
|
||||
RCC.APB3Freq_Value=100000000
|
||||
RCC.APB4Freq_Value=100000000
|
||||
RCC.AXIClockFreq_Value=200000000
|
||||
RCC.CECFreq_Value=32000
|
||||
RCC.CKPERFreq_Value=64000000
|
||||
RCC.CortexFreq_Value=480000000
|
||||
RCC.CpuClockFreq_Value=480000000
|
||||
RCC.D1CPREFreq_Value=480000000
|
||||
RCC.CortexFreq_Value=400000000
|
||||
RCC.CpuClockFreq_Value=400000000
|
||||
RCC.D1CPREFreq_Value=400000000
|
||||
RCC.D1PPRE=RCC_APB3_DIV2
|
||||
RCC.D2PPRE1=RCC_APB1_DIV2
|
||||
RCC.D2PPRE2=RCC_APB2_DIV2
|
||||
RCC.D3PPRE=RCC_APB4_DIV2
|
||||
RCC.DFSDMACLkFreq_Value=480000000
|
||||
RCC.DFSDMFreq_Value=120000000
|
||||
RCC.DIVM1=1
|
||||
RCC.DIVN1=80
|
||||
RCC.DIVP1Freq_Value=480000000
|
||||
RCC.DFSDMACLkFreq_Value=400000000
|
||||
RCC.DFSDMFreq_Value=100000000
|
||||
RCC.DIVM1=3
|
||||
RCC.DIVN1=200
|
||||
RCC.DIVP1Freq_Value=400000000
|
||||
RCC.DIVP2Freq_Value=24187500
|
||||
RCC.DIVP3Freq_Value=24187500
|
||||
RCC.DIVQ1Freq_Value=480000000
|
||||
RCC.DIVQ1Freq_Value=400000000
|
||||
RCC.DIVQ2Freq_Value=24187500
|
||||
RCC.DIVQ3Freq_Value=24187500
|
||||
RCC.DIVR1Freq_Value=480000000
|
||||
RCC.DIVR1Freq_Value=400000000
|
||||
RCC.DIVR2Freq_Value=24187500
|
||||
RCC.DIVR3Freq_Value=24187500
|
||||
RCC.FDCANFreq_Value=480000000
|
||||
RCC.FMCFreq_Value=240000000
|
||||
RCC.FDCANFreq_Value=400000000
|
||||
RCC.FMCFreq_Value=200000000
|
||||
RCC.FamilyName=M
|
||||
RCC.HCLK3ClockFreq_Value=240000000
|
||||
RCC.HCLKFreq_Value=240000000
|
||||
RCC.HCLK3ClockFreq_Value=200000000
|
||||
RCC.HCLKFreq_Value=200000000
|
||||
RCC.HPRE=RCC_HCLK_DIV2
|
||||
RCC.HRTIMFreq_Value=240000000
|
||||
RCC.HRTIMFreq_Value=200000000
|
||||
RCC.HSE_VALUE=12000000
|
||||
RCC.I2C123Freq_Value=120000000
|
||||
RCC.I2C4Freq_Value=120000000
|
||||
RCC.I2C123Freq_Value=100000000
|
||||
RCC.I2C4Freq_Value=100000000
|
||||
RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,D1PPRE,D2PPRE1,D2PPRE2,D3PPRE,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVN1,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1Freq_Value,DIVQ2Freq_Value,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2Freq_Value,DIVR3Freq_Value,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,HPRE,HRTIMFreq_Value,HSE_VALUE,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL2FRACN,PLL3FRACN,PLLFRACN,PLLSourceVirtual,QSPIFreq_Value,RNGFreq_Value,RTCFreq_Value,SAI1Freq_Value,SAI23Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16Freq_Value,USART234578Freq_Value,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value
|
||||
RCC.LPTIM1Freq_Value=120000000
|
||||
RCC.LPTIM2Freq_Value=120000000
|
||||
RCC.LPTIM345Freq_Value=120000000
|
||||
RCC.LPUART1Freq_Value=120000000
|
||||
RCC.LPTIM1Freq_Value=100000000
|
||||
RCC.LPTIM2Freq_Value=100000000
|
||||
RCC.LPTIM345Freq_Value=100000000
|
||||
RCC.LPUART1Freq_Value=100000000
|
||||
RCC.LTDCFreq_Value=24187500
|
||||
RCC.MCO1PinFreq_Value=64000000
|
||||
RCC.MCO2PinFreq_Value=480000000
|
||||
RCC.MCO2PinFreq_Value=400000000
|
||||
RCC.PLL2FRACN=0
|
||||
RCC.PLL3FRACN=0
|
||||
RCC.PLLFRACN=0
|
||||
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
|
||||
RCC.QSPIFreq_Value=240000000
|
||||
RCC.QSPIFreq_Value=200000000
|
||||
RCC.RNGFreq_Value=48000000
|
||||
RCC.RTCFreq_Value=32000
|
||||
RCC.SAI1Freq_Value=480000000
|
||||
RCC.SAI23Freq_Value=480000000
|
||||
RCC.SAI4AFreq_Value=480000000
|
||||
RCC.SAI4BFreq_Value=480000000
|
||||
RCC.SDMMCFreq_Value=480000000
|
||||
RCC.SPDIFRXFreq_Value=480000000
|
||||
RCC.SPI123Freq_Value=480000000
|
||||
RCC.SPI45Freq_Value=120000000
|
||||
RCC.SPI6Freq_Value=120000000
|
||||
RCC.SWPMI1Freq_Value=120000000
|
||||
RCC.SYSCLKFreq_VALUE=480000000
|
||||
RCC.SAI1Freq_Value=400000000
|
||||
RCC.SAI23Freq_Value=400000000
|
||||
RCC.SAI4AFreq_Value=400000000
|
||||
RCC.SAI4BFreq_Value=400000000
|
||||
RCC.SDMMCFreq_Value=400000000
|
||||
RCC.SPDIFRXFreq_Value=400000000
|
||||
RCC.SPI123Freq_Value=400000000
|
||||
RCC.SPI45Freq_Value=100000000
|
||||
RCC.SPI6Freq_Value=100000000
|
||||
RCC.SWPMI1Freq_Value=100000000
|
||||
RCC.SYSCLKFreq_VALUE=400000000
|
||||
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
|
||||
RCC.Tim1OutputFreq_Value=240000000
|
||||
RCC.Tim2OutputFreq_Value=240000000
|
||||
RCC.Tim1OutputFreq_Value=200000000
|
||||
RCC.Tim2OutputFreq_Value=200000000
|
||||
RCC.TraceFreq_Value=64000000
|
||||
RCC.USART16Freq_Value=120000000
|
||||
RCC.USART234578Freq_Value=120000000
|
||||
RCC.USBFreq_Value=480000000
|
||||
RCC.VCO1OutputFreq_Value=960000000
|
||||
RCC.USART16Freq_Value=100000000
|
||||
RCC.USART234578Freq_Value=100000000
|
||||
RCC.USBFreq_Value=400000000
|
||||
RCC.VCO1OutputFreq_Value=800000000
|
||||
RCC.VCO2OutputFreq_Value=48375000
|
||||
RCC.VCO3OutputFreq_Value=48375000
|
||||
RCC.VCOInput1Freq_Value=12000000
|
||||
RCC.VCOInput1Freq_Value=4000000
|
||||
RCC.VCOInput2Freq_Value=375000
|
||||
RCC.VCOInput3Freq_Value=375000
|
||||
SH.FMC_A0.0=FMC_A0,12b-sda1
|
||||
SH.FMC_A0.ConfNb=1
|
||||
SH.FMC_A1.0=FMC_A1,12b-sda1
|
||||
SH.FMC_A1.ConfNb=1
|
||||
SH.FMC_A10.0=FMC_A10,12b-sda1
|
||||
SH.FMC_A10.ConfNb=1
|
||||
SH.FMC_A11.0=FMC_A11,12b-sda1
|
||||
SH.FMC_A11.ConfNb=1
|
||||
SH.FMC_A14_BA0.0=FMC_BA0,FourSdramBanks1
|
||||
SH.FMC_A14_BA0.ConfNb=1
|
||||
SH.FMC_A15_BA1.0=FMC_BA1,FourSdramBanks1
|
||||
SH.FMC_A15_BA1.ConfNb=1
|
||||
SH.FMC_A2.0=FMC_A2,12b-sda1
|
||||
SH.FMC_A2.ConfNb=1
|
||||
SH.FMC_A3.0=FMC_A3,12b-sda1
|
||||
SH.FMC_A3.ConfNb=1
|
||||
SH.FMC_A4.0=FMC_A4,12b-sda1
|
||||
SH.FMC_A4.ConfNb=1
|
||||
SH.FMC_A5.0=FMC_A5,12b-sda1
|
||||
SH.FMC_A5.ConfNb=1
|
||||
SH.FMC_A6.0=FMC_A6,12b-sda1
|
||||
SH.FMC_A6.ConfNb=1
|
||||
SH.FMC_A7.0=FMC_A7,12b-sda1
|
||||
SH.FMC_A7.ConfNb=1
|
||||
SH.FMC_A8.0=FMC_A8,12b-sda1
|
||||
SH.FMC_A8.ConfNb=1
|
||||
SH.FMC_A9.0=FMC_A9,12b-sda1
|
||||
SH.FMC_A9.ConfNb=1
|
||||
SH.FMC_D0_DA0.0=FMC_D0,sd-32b-d1
|
||||
SH.FMC_D0_DA0.ConfNb=1
|
||||
SH.FMC_D10_DA10.0=FMC_D10,sd-32b-d1
|
||||
SH.FMC_D10_DA10.ConfNb=1
|
||||
SH.FMC_D11_DA11.0=FMC_D11,sd-32b-d1
|
||||
SH.FMC_D11_DA11.ConfNb=1
|
||||
SH.FMC_D12_DA12.0=FMC_D12,sd-32b-d1
|
||||
SH.FMC_D12_DA12.ConfNb=1
|
||||
SH.FMC_D13_DA13.0=FMC_D13,sd-32b-d1
|
||||
SH.FMC_D13_DA13.ConfNb=1
|
||||
SH.FMC_D14_DA14.0=FMC_D14,sd-32b-d1
|
||||
SH.FMC_D14_DA14.ConfNb=1
|
||||
SH.FMC_D15_DA15.0=FMC_D15,sd-32b-d1
|
||||
SH.FMC_D15_DA15.ConfNb=1
|
||||
SH.FMC_D16.0=FMC_D16,sd-32b-d1
|
||||
SH.FMC_D16.ConfNb=1
|
||||
SH.FMC_D17.0=FMC_D17,sd-32b-d1
|
||||
SH.FMC_D17.ConfNb=1
|
||||
SH.FMC_D18.0=FMC_D18,sd-32b-d1
|
||||
SH.FMC_D18.ConfNb=1
|
||||
SH.FMC_D19.0=FMC_D19,sd-32b-d1
|
||||
SH.FMC_D19.ConfNb=1
|
||||
SH.FMC_D1_DA1.0=FMC_D1,sd-32b-d1
|
||||
SH.FMC_D1_DA1.ConfNb=1
|
||||
SH.FMC_D20.0=FMC_D20,sd-32b-d1
|
||||
SH.FMC_D20.ConfNb=1
|
||||
SH.FMC_D21.0=FMC_D21,sd-32b-d1
|
||||
SH.FMC_D21.ConfNb=1
|
||||
SH.FMC_D22.0=FMC_D22,sd-32b-d1
|
||||
SH.FMC_D22.ConfNb=1
|
||||
SH.FMC_D23.0=FMC_D23,sd-32b-d1
|
||||
SH.FMC_D23.ConfNb=1
|
||||
SH.FMC_D24.0=FMC_D24,sd-32b-d1
|
||||
SH.FMC_D24.ConfNb=1
|
||||
SH.FMC_D25.0=FMC_D25,sd-32b-d1
|
||||
SH.FMC_D25.ConfNb=1
|
||||
SH.FMC_D26.0=FMC_D26,sd-32b-d1
|
||||
SH.FMC_D26.ConfNb=1
|
||||
SH.FMC_D27.0=FMC_D27,sd-32b-d1
|
||||
SH.FMC_D27.ConfNb=1
|
||||
SH.FMC_D28.0=FMC_D28,sd-32b-d1
|
||||
SH.FMC_D28.ConfNb=1
|
||||
SH.FMC_D29.0=FMC_D29,sd-32b-d1
|
||||
SH.FMC_D29.ConfNb=1
|
||||
SH.FMC_D2_DA2.0=FMC_D2,sd-32b-d1
|
||||
SH.FMC_D2_DA2.ConfNb=1
|
||||
SH.FMC_D30.0=FMC_D30,sd-32b-d1
|
||||
SH.FMC_D30.ConfNb=1
|
||||
SH.FMC_D31.0=FMC_D31,sd-32b-d1
|
||||
SH.FMC_D31.ConfNb=1
|
||||
SH.FMC_D3_DA3.0=FMC_D3,sd-32b-d1
|
||||
SH.FMC_D3_DA3.ConfNb=1
|
||||
SH.FMC_D4_DA4.0=FMC_D4,sd-32b-d1
|
||||
SH.FMC_D4_DA4.ConfNb=1
|
||||
SH.FMC_D5_DA5.0=FMC_D5,sd-32b-d1
|
||||
SH.FMC_D5_DA5.ConfNb=1
|
||||
SH.FMC_D6_DA6.0=FMC_D6,sd-32b-d1
|
||||
SH.FMC_D6_DA6.ConfNb=1
|
||||
SH.FMC_D7_DA7.0=FMC_D7,sd-32b-d1
|
||||
SH.FMC_D7_DA7.ConfNb=1
|
||||
SH.FMC_D8_DA8.0=FMC_D8,sd-32b-d1
|
||||
SH.FMC_D8_DA8.ConfNb=1
|
||||
SH.FMC_D9_DA9.0=FMC_D9,sd-32b-d1
|
||||
SH.FMC_D9_DA9.ConfNb=1
|
||||
SH.FMC_NBL0.0=FMC_NBL0,Sd4ByteEnable1
|
||||
SH.FMC_NBL0.ConfNb=1
|
||||
SH.FMC_NBL1.0=FMC_NBL1,Sd4ByteEnable1
|
||||
SH.FMC_NBL1.ConfNb=1
|
||||
SH.FMC_NBL2.0=FMC_NBL2,Sd4ByteEnable1
|
||||
SH.FMC_NBL2.ConfNb=1
|
||||
SH.FMC_NBL3.0=FMC_NBL3,Sd4ByteEnable1
|
||||
SH.FMC_NBL3.ConfNb=1
|
||||
SH.FMC_SDCLK.0=FMC_SDCLK,12b-sda1
|
||||
SH.FMC_SDCLK.ConfNb=1
|
||||
SH.FMC_SDNCAS.0=FMC_SDNCAS,12b-sda1
|
||||
SH.FMC_SDNCAS.ConfNb=1
|
||||
SH.FMC_SDNRAS.0=FMC_SDNRAS,12b-sda1
|
||||
SH.FMC_SDNRAS.ConfNb=1
|
||||
SH.FMC_SDNWE.0=FMC_SDNWE,12b-sda1
|
||||
SH.FMC_SDNWE.ConfNb=1
|
||||
USART1.IPParameters=VirtualMode-Asynchronous
|
||||
USART1.VirtualMode-Asynchronous=VM_ASYNC
|
||||
VP_SYS_VS_Systick.Mode=SysTick
|
||||
|
|
|
|||
|
|
@ -45,7 +45,10 @@ menu "On-chip Peripheral Drivers"
|
|||
depends on BSP_USING_LPUART1 && RT_SERIAL_USING_DMA
|
||||
default n
|
||||
endif
|
||||
|
||||
config BSP_USING_SDRAM
|
||||
bool "Enable SDRAM"
|
||||
default n
|
||||
|
||||
source "../libraries/HAL_Drivers/Kconfig"
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -14,6 +14,7 @@ CubeMX_Config/Core/Src/stm32h7xx_hal_msp.c
|
|||
|
||||
path = [cwd]
|
||||
path += [cwd + '/CubeMX_Config/Core/Inc']
|
||||
path += [cwd + '/ports']
|
||||
|
||||
startup_path_prefix = SDK_LIB
|
||||
|
||||
|
|
|
|||
|
|
@ -14,7 +14,7 @@
|
|||
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Supply configuration update enable
|
||||
|
|
@ -22,7 +22,7 @@ void SystemClock_Config(void)
|
|||
HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);
|
||||
/** Configure the main internal regulator output voltage
|
||||
*/
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0);
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
|
||||
while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
|
|
@ -32,12 +32,12 @@ void SystemClock_Config(void)
|
|||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 1;
|
||||
RCC_OscInitStruct.PLL.PLLN = 80;
|
||||
RCC_OscInitStruct.PLL.PLLM = 3;
|
||||
RCC_OscInitStruct.PLL.PLLN = 200;
|
||||
RCC_OscInitStruct.PLL.PLLP = 2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 2;
|
||||
RCC_OscInitStruct.PLL.PLLR = 2;
|
||||
RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_3;
|
||||
RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2;
|
||||
RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
|
||||
RCC_OscInitStruct.PLL.PLLFRACN = 0;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
|
|
@ -57,7 +57,7 @@ void SystemClock_Config(void)
|
|||
RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
|
||||
RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
|
|
|||
|
|
@ -0,0 +1,68 @@
|
|||
/*
|
||||
* Copyright (c) 2006-2021, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2021-12-14 supperthomas The first version for STM32H7xx
|
||||
*/
|
||||
|
||||
#ifndef __SDRAM_PORT_H__
|
||||
#define __SDRAM_PORT_H__
|
||||
|
||||
/* parameters for sdram peripheral */
|
||||
/* Bank1 or Bank2 */
|
||||
#define SDRAM_TARGET_BANK 1
|
||||
/* stm32h7 Bank1:0XC0000000 Bank2:0XD0000000 */
|
||||
#define SDRAM_BANK_ADDR ((uint32_t)0XC0000000)
|
||||
/* data width: 8, 16, 32 */
|
||||
#define SDRAM_DATA_WIDTH 32
|
||||
/* column bit numbers: 8, 9, 10, 11 */
|
||||
#define SDRAM_COLUMN_BITS 9
|
||||
/* row bit numbers: 11, 12, 13 */
|
||||
#define SDRAM_ROW_BITS 12
|
||||
/* cas latency clock number: 1, 2, 3 */
|
||||
#define SDRAM_CAS_LATENCY 2
|
||||
/* read pipe delay: 0, 1, 2 */
|
||||
#define SDRAM_RPIPE_DELAY 0
|
||||
/* clock divid: 2, 3 */
|
||||
#define SDCLOCK_PERIOD 2
|
||||
/* refresh rate counter */
|
||||
#define SDRAM_REFRESH_RATE (64) // ms
|
||||
#define SDRAM_FREQUENCY (100000) // 100 MHz
|
||||
#define SDRAM_REFRESH_CYCLES 4096
|
||||
#define SDRAM_REFRESH_COUNT (SDRAM_REFRESH_RATE * SDRAM_FREQUENCY / SDRAM_REFRESH_CYCLES - 20) //((uint32_t)0x02A5)
|
||||
#define SDRAM_SIZE (32 * 1024 * 1024)
|
||||
|
||||
/* Timing configuration for W9825G6KH-6 */
|
||||
/* 100 MHz of HCKL3 clock frequency (200MHz/2) */
|
||||
/* TMRD: 2 Clock cycles */
|
||||
#define LOADTOACTIVEDELAY 2
|
||||
/* TXSR: 8x10ns */
|
||||
#define EXITSELFREFRESHDELAY 7
|
||||
/* TRAS: 5x10ns */
|
||||
#define SELFREFRESHTIME 5
|
||||
/* TRC: 7x10ns */
|
||||
#define ROWCYCLEDELAY 6
|
||||
/* TWR: 2 Clock cycles */
|
||||
#define WRITERECOVERYTIME 3
|
||||
/* TRP: 2x10ns */
|
||||
#define RPDELAY 2
|
||||
/* TRCD: 2x10ns */
|
||||
#define RCDDELAY 2
|
||||
|
||||
/* memory mode register */
|
||||
#define SDRAM_MODEREG_BURST_LENGTH_1 ((uint16_t)0x0000)
|
||||
#define SDRAM_MODEREG_BURST_LENGTH_2 ((uint16_t)0x0001)
|
||||
#define SDRAM_MODEREG_BURST_LENGTH_4 ((uint16_t)0x0002)
|
||||
#define SDRAM_MODEREG_BURST_LENGTH_8 ((uint16_t)0x0004)
|
||||
#define SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL ((uint16_t)0x0000)
|
||||
#define SDRAM_MODEREG_BURST_TYPE_INTERLEAVED ((uint16_t)0x0008)
|
||||
#define SDRAM_MODEREG_CAS_LATENCY_2 ((uint16_t)0x0020)
|
||||
#define SDRAM_MODEREG_CAS_LATENCY_3 ((uint16_t)0x0030)
|
||||
#define SDRAM_MODEREG_OPERATING_MODE_STANDARD ((uint16_t)0x0000)
|
||||
#define SDRAM_MODEREG_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000)
|
||||
#define SDRAM_MODEREG_WRITEBURST_MODE_SINGLE ((uint16_t)0x0200)
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue