diff --git a/.gitee/ISSUE_TEMPLATE.en.md b/.gitee/ISSUE_TEMPLATE.en.md new file mode 100644 index 0000000000..59af654ae2 --- /dev/null +++ b/.gitee/ISSUE_TEMPLATE.en.md @@ -0,0 +1,9 @@ +### How is this problem caused? + + + +### Steps to reproduce + + + +### Error message \ No newline at end of file diff --git a/.gitee/ISSUE_TEMPLATE.zh-CN.md b/.gitee/ISSUE_TEMPLATE.zh-CN.md new file mode 100644 index 0000000000..b6cf8cdbad --- /dev/null +++ b/.gitee/ISSUE_TEMPLATE.zh-CN.md @@ -0,0 +1,9 @@ +### 该问题是怎么引起的？ + + + +### 重现步骤 + + + +### 报错信息 \ No newline at end of file diff --git a/.gitee/ISSUE_TEMPLATE.zh-TW.md b/.gitee/ISSUE_TEMPLATE.zh-TW.md new file mode 100644 index 0000000000..7621fba54e --- /dev/null +++ b/.gitee/ISSUE_TEMPLATE.zh-TW.md @@ -0,0 +1,9 @@ +### 該問題是怎麽引起的？ + + + +### 重現步驟 + + + +### 報錯信息 \ No newline at end of file diff --git a/.gitee/PULL_REQUEST_TEMPLATE.en.md b/.gitee/PULL_REQUEST_TEMPLATE.en.md new file mode 100644 index 0000000000..c9ee760db1 --- /dev/null +++ b/.gitee/PULL_REQUEST_TEMPLATE.en.md @@ -0,0 +1,29 @@ +## PR description + +[ +The content in this square bracket must be filled in and replaced, otherwise PR can not be merged. The contents outside square brackets need not be changed, but please read them carefully. + +Please fill in your PR description here, which can include one of the following items: why to submit this PR; what is the problem solved and what is your solution; + +And confirm in which case or board have been tested. +] + +The following content must not be changed in submitted PR message. Otherwise, the PR will be closed immediately. After submitted PR, please use web browser to visit PR, and check items one by one, and ticked them if no problem. + +### Intent for your PR + +Choose one (Mandatory): + +- [ ] This PR is for a code-review and is intended to get feedback +- [ ] This PR is mature, and ready to be integrated into the repo + +### Code Quality： + +As part of this pull request, I've considered the following: + +- [ ] Already check the difference between PR and old code +- [ ] Style guide is adhered to, including spacing, naming and other style +- [ ] All redundant code is removed and cleaned up +- [ ] BSP All modifications are justified and not affect other components or BSP +- [ ] I've commented appropriately where code is tricky +- [ ] Code in this PR is of high quality diff --git a/.gitee/PULL_REQUEST_TEMPLATE.zh-CN.md b/.gitee/PULL_REQUEST_TEMPLATE.zh-CN.md new file mode 100644 index 0000000000..a992458ef4 --- /dev/null +++ b/.gitee/PULL_REQUEST_TEMPLATE.zh-CN.md @@ -0,0 +1,29 @@ +## 拉取/合并请求描述： + +[ +这段方括号里的内容是您**必须填写并替换掉**的，否则PR不可能被合并。**方括号外面的内容不需要修改，但请仔细阅读。** + +请在这里填写您的PR描述，可以包括以下之一的内容：为什么提交这份PR；解决的问题是什么，你的解决方案是什么； + +并确认并列出已经在什么情况或板卡上进行了测试。 +] + +以下的内容不应该在提交PR时的message修改，修改下述message，PR会被直接关闭。请在提交PR后，浏览器查看PR并对以下检查项逐项check，没问题后逐条在页面上打钩。 + +### 当前拉取/合并请求的状态： + +必须选择一项: + +- [ ] 本拉取/合并请求是一个草稿版本 +- [ ] 本拉取/合并请求是一个成熟版本 + +### 代码质量： + +我在这个拉取/合并请求中已经考虑了: + +- [ ] 已经仔细查看过代码改动的对比 +- [ ] 代码风格正确，包括缩进空格，命名及其他风格 +- [ ] 没有垃圾代码，代码尽量精简，不包含`#if 0`代码，不包含已经被注释了的代码 +- [ ] 所有变更均有原因及合理的，并且不会影响到其他软件组件代码或 +- [ ] 对难懂代码均提供对应的注释 +- [ ] 本拉取/合并请求代码是高质量的 diff --git a/.gitee/PULL_REQUEST_TEMPLATE.zh-TW.md b/.gitee/PULL_REQUEST_TEMPLATE.zh-TW.md new file mode 100644 index 0000000000..9788e1a39f --- /dev/null +++ b/.gitee/PULL_REQUEST_TEMPLATE.zh-TW.md @@ -0,0 +1,29 @@ +## 拉取/合並請求描述： + +[ +這段方括號裏的內容是您**必須填寫並替換掉**的，否則PR不可能被合並。**方括號外面的內容不需要修改，但請仔細閱讀。** + +請在這裏填寫您的PR描述，可以包括以下之壹的內容：為什麽提交這份PR；解決的問題是什麽，妳的解決方案是什麽； + +並確認並列出已經在什麽情況或板卡上進行了測試。 +] + +以下的內容不應該在提交PR時的message修改，修改下述message，PR會被直接關閉。請在提交PR後，瀏覽器查看PR並對以下檢查項逐項check，沒問題後逐條在頁面上打鉤。 + +### 當前拉取/合並請求的狀態： + +必須選擇壹項: + +- [ ] 本拉取/合並請求是壹個草稿版本 +- [ ] 本拉取/合並請求是壹個成熟版本 + +### 代碼質量： + +我在這個拉取/合並請求中已經考慮了: + +- [ ] 已經仔細查看過代碼改動的對比 +- [ ] 代碼風格正確，包括縮進空格，命名及其他風格 +- [ ] 沒有垃圾代碼，代碼盡量精簡，不包含`#if 0`代碼，不包含已經被註釋了的代碼 +- [ ] 所有變更均有原因及合理的，並且不會影響到其他軟件組件代碼或 +- [ ] 對難懂代碼均提供對應的註釋 +- [ ] 本拉取/合並請求代碼是高質量的 diff --git a/.travis.yml b/.travis.yml index 362ee0d73e..43a1753e32 100644 --- a/.travis.yml +++ b/.travis.yml @@ -90,6 +90,7 @@ env: - RTT_BSP='stm32/stm32f407-atk-explorer' RTT_TOOL_CHAIN='sourcery-arm' - RTT_BSP='stm32/stm32f407-st-discovery' RTT_TOOL_CHAIN='sourcery-arm' - RTT_BSP='stm32/stm32f410-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm' + - RTT_BSP='stm32/stm32f411-atk-nano' RTT_TOOL_CHAIN='sourcery-arm' - RTT_BSP='stm32/stm32f411-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm' - RTT_BSP='stm32/stm32f411-weact-MiniF4' RTT_TOOL_CHAIN='sourcery-arm' - RTT_BSP='stm32/stm32f413-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm' diff --git a/Jenkinsfile b/Jenkinsfile new file mode 100644 index 0000000000..a106793bbb --- /dev/null +++ b/Jenkinsfile @@ -0,0 +1,158 @@ +pipeline { + agent { + docker { + image 'ubuntu_ci:latest' + } + } + stages { + stage('build') { + steps { + sh ''' + + uname -a + cat /etc/issue + apt-get update + apt-get install -y -qq lib32ncurses5 lib32z1 > /dev/null + + curl -s http://download.isrc.rt-thread.com/download/gcc-arm-none-eabi-5_4-2016q3-20160926-linux.tar.bz2 | sudo tar xjf - -C /opt + /opt/gcc-arm-none-eabi-5_4-2016q3/bin/arm-none-eabi-gcc --version + ''' + + script { + def bsp_array = [ + ['CME_M7', 'sourcery-arm'], + // ['apollo2', 'sourcery-arm'], /* CI compile not support */ + ['asm9260t', 'sourcery-arm'], + ['at91sam9260', 'sourcery-arm'], + ['allwinner_tina', 'sourcery-arm'], + ['efm32', 'sourcery-arm'], + // ['gd32e230k-start', 'sourcery-arm'], /* CI compile not support */ + ['gd32303e-eval', 'sourcery-arm'], + // ['gd32450z-eval', 'sourcery-arm'], /* CI link not support */ + ['gkipc', 'sourcery-arm'], + ['imx6sx/cortex-a9', 'sourcery-arm'], + // ['imxrt/imxrt1052-atk-commander', 'sourcery-arm'], /* CI compile not support */ + // ['imxrt/imxrt1052-fire-pro', 'sourcery-arm'], /* CI compile not support */ + // ['imxrt/imxrt1052-nxp-evk', 'sourcery-arm'], /* CI compile not support */ + ['lm3s8962', 'sourcery-arm'], + ['lm3s9b9x', 'sourcery-arm'], + ['lm4f232', 'sourcery-arm'], + ['tm4c129x', 'sourcery-arm'], + // ['lpc43xx/M4', 'sourcery-arm'], /* CI compile not support */ + ['lpc176x', 'sourcery-arm'], + ['lpc178x', 'sourcery-arm'], + ['lpc408x', 'sourcery-arm'], + ['lpc1114', 'sourcery-arm'], + ['lpc2148', 'sourcery-arm'], + ['lpc2478', 'sourcery-arm'], + ['lpc5410x', 'sourcery-arm'], + // ['lpc54114-lite', 'sourcery-arm'], /* CI link not support */ + ['mb9bf500r', 'sourcery-arm'], + ['mb9bf506r', 'sourcery-arm'], + ['mb9bf618s', 'sourcery-arm'], + ['mb9bf568r', 'sourcery-arm'], + ['mini2440', 'sourcery-arm'], + ['nuvoton_nuc472', 'sourcery-arm'], + ['nuvoton_m05x', 'sourcery-arm'], + ['qemu-vexpress-a9', 'sourcery-arm'], + ['qemu-vexpress-gemini', 'sourcery-arm'], + ['sam7x', 'sourcery-arm'], + // ['stm32/stm32f072-st-nucleo', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f091-st-nucleo', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f103-atk-nano', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f103-atk-warshipv3', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f103-dofly-lyc8', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f103-dofly-M3S', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f103-fire-arbitrary', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f103-hw100k-ibox', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f103-mini-system', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f103-onenet-nbiot', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f103-yf-ufun', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f107-uc-eval', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f401-st-nucleo', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f405-smdz-breadfruit', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f407-atk-explorer', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f407-st-discovery', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f410-st-nucleo', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f411-st-nucleo', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f411-weact-MiniF4', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f413-st-nucleo', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f427-robomaster-a', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f429-armfly-v6', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f429-atk-apollo', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f429-fire-challenger', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f429-st-disco', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f446-st-nucleo', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f469-st-disco', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32f746-st-disco', 'sourcery-arm'], /* CI compile -mcpu= not support */ + // ['stm32/stm32f767-atk-apollo', 'sourcery-arm'], /* CI compile -mcpu= not support */ + // ['stm32/stm32f767-fire-challenger', 'sourcery-arm'], /* CI compile -mcpu= not support */ + // ['stm32/stm32f767-st-nucleo', 'sourcery-arm'], /* CI compile -mcpu= not support */ + // ['stm32/stm32g071-st-nucleo', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32g431-st-nucleo', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32h743-atk-apollo', 'sourcery-arm'], /* CI compile -mcpu= not support */ + // ['stm32/stm32h743-st-nucleo', 'sourcery-arm'], /* CI compile -mcpu= not support */ + // ['stm32/stm32h747-st-discovery', 'sourcery-arm'], /* CI compile -mcpu= not support */ + // ['stm32/stm32l4r9-st-eval', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32l010-st-nucleo', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32l053-st-nucleo', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32l412-st-nucleo', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32l432-st-nucleo', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32l433-st-nucleo', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32l475-atk-pandora', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32l475-st-discovery', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32l476-st-nucleo', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32l496-ali-developer', 'sourcery-arm'], /* CI compile C99 not support */ + // ['stm32/stm32l496-st-nucleo', 'sourcery-arm'], /* CI compile C99 not support */ + ['stm32f20x', 'sourcery-arm'], + ['swm320-lq100', 'sourcery-arm'], + ['beaglebone', 'sourcery-arm'], + ['zynq7000', 'sourcery-arm'], + ['frdm-k64f', 'sourcery-arm'], + ['fh8620', 'sourcery-arm'], + ['xplorer4330/M4', 'sourcery-arm'], + // ['at32/at32f403a-start', 'sourcery-arm'],/* CI link not support */ + // ['at32/at32f407-start', 'sourcery-arm']/* CI compile C99 not support */ + ] + + for (int i in bsp_array) { + + sh """ + + export RTT_BSP=${i.getAt(0)} + export RTT_TOOL_CHAIN=${i.getAt(1)} + export RTT_EXEC_PATH=/opt/gcc-arm-none-eabi-5_4-2016q3/bin/ + export RTT_CC='gcc' + export RTT_ROOT=`pwd` + + echo \$RTT_EXEC_PATH + + export CPUS=\$(cat /proc/cpuinfo | grep "processor" | sort | uniq | wc -l) + scons -j\${CPUS} -C bsp/\$RTT_BSP + """ + } + } + } + } + } + post { + failure { + addGiteeMRComment(comment: """:x: Jenkins CI 构建失败。\n\n \ +查看更多日志详细信息： \ +Jenkins[${env.JOB_NAME} # ${env.BUILD_NUMBER}] \ +
\ +:x: The Jenkins CI build failed.\n\n \ +Results available at: \ +Jenkins[${env.JOB_NAME} # ${env.BUILD_NUMBER}]""") + } + success { + addGiteeMRComment(comment: """:white_check_mark: Jenkins CI 构建通过。\n\n \ +查看更多日志详细信息： \ +Jenkins[${env.JOB_NAME} # ${env.BUILD_NUMBER}] \ +
\ +:white_check_mark: The Jenkins CI build passed.\n\n \ +Results available at: \ +Jenkins[${env.JOB_NAME} # ${env.BUILD_NUMBER}]""") + } + } +} diff --git a/bsp/k210/.config b/bsp/k210/.config index 77ebb4aa8c..705dc78652 100644 --- a/bsp/k210/.config +++ b/bsp/k210/.config @@ -15,7 +15,7 @@ CONFIG_RT_ALIGN_SIZE=8 CONFIG_RT_THREAD_PRIORITY_32=y # CONFIG_RT_THREAD_PRIORITY_256 is not set CONFIG_RT_THREAD_PRIORITY_MAX=32 -CONFIG_RT_TICK_PER_SECOND=100 +CONFIG_RT_TICK_PER_SECOND=1000 CONFIG_RT_USING_OVERFLOW_CHECK=y CONFIG_RT_USING_HOOK=y CONFIG_RT_USING_IDLE_HOOK=y @@ -50,10 +50,11 @@ CONFIG_RT_USING_SIGNALS=y # Memory Management # CONFIG_RT_USING_MEMPOOL=y -# CONFIG_RT_USING_MEMHEAP is not set +CONFIG_RT_USING_MEMHEAP=y # CONFIG_RT_USING_NOHEAP is not set # CONFIG_RT_USING_SMALL_MEM is not set CONFIG_RT_USING_SLAB=y +# CONFIG_RT_USING_MEMHEAP_AS_HEAP is not set CONFIG_RT_USING_HEAP=y # @@ -65,8 +66,9 @@ CONFIG_RT_USING_DEVICE=y CONFIG_RT_USING_CONSOLE=y CONFIG_RT_CONSOLEBUF_SIZE=128 CONFIG_RT_CONSOLE_DEVICE_NAME="uarths" -CONFIG_RT_VER_NUM=0x40001 +CONFIG_RT_VER_NUM=0x40003 CONFIG_ARCH_CPU_64BIT=y +# CONFIG_RT_USING_CPU_FFS is not set CONFIG_ARCH_RISCV=y CONFIG_ARCH_RISCV64=y # CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set @@ -153,7 +155,6 @@ CONFIG_RT_USING_PIN=y # CONFIG_RT_USING_PWM is not set # CONFIG_RT_USING_MTD_NOR is not set # CONFIG_RT_USING_MTD_NAND is not set -# CONFIG_RT_USING_MTD is not set # CONFIG_RT_USING_PM is not set # CONFIG_RT_USING_RTC is not set # CONFIG_RT_USING_SDIO is not set @@ -164,18 +165,17 @@ CONFIG_RT_USING_SFUD=y CONFIG_RT_SFUD_USING_SFDP=y CONFIG_RT_SFUD_USING_FLASH_INFO_TABLE=y # CONFIG_RT_SFUD_USING_QSPI is not set +CONFIG_RT_SFUD_SPI_MAX_HZ=50000000 CONFIG_RT_DEBUG_SFUD=y -# CONFIG_RT_USING_W25QXX is not set -# CONFIG_RT_USING_GD is not set # CONFIG_RT_USING_ENC28J60 is not set # CONFIG_RT_USING_SPI_WIFI is not set # CONFIG_RT_USING_WDT is not set # CONFIG_RT_USING_AUDIO is not set # CONFIG_RT_USING_SENSOR is not set - -# -# Using WiFi -# +# CONFIG_RT_USING_TOUCH is not set +# CONFIG_RT_USING_HWCRYPTO is not set +# CONFIG_RT_USING_PULSE_ENCODER is not set +# CONFIG_RT_USING_INPUT_CAPTURE is not set # CONFIG_RT_USING_WIFI is not set # @@ -214,11 +214,6 @@ CONFIG_RT_USING_POSIX=y # # CONFIG_RT_USING_LWIP is not set -# -# Modbus master and slave stack -# -# CONFIG_RT_USING_MODBUS is not set - # # AT commands # @@ -233,7 +228,31 @@ CONFIG_RT_USING_POSIX=y # Utilities # # CONFIG_RT_USING_RYM is not set -# CONFIG_RT_USING_ULOG is not set +CONFIG_RT_USING_ULOG=y +# CONFIG_ULOG_OUTPUT_LVL_A is not set +# CONFIG_ULOG_OUTPUT_LVL_E is not set +# CONFIG_ULOG_OUTPUT_LVL_W is not set +# CONFIG_ULOG_OUTPUT_LVL_I is not set +CONFIG_ULOG_OUTPUT_LVL_D=y +CONFIG_ULOG_OUTPUT_LVL=7 +# CONFIG_ULOG_USING_ISR_LOG is not set +CONFIG_ULOG_ASSERT_ENABLE=y +CONFIG_ULOG_LINE_BUF_SIZE=128 +# CONFIG_ULOG_USING_ASYNC_OUTPUT is not set + +# +# log format +# +# CONFIG_ULOG_OUTPUT_FLOAT is not set +CONFIG_ULOG_USING_COLOR=y +CONFIG_ULOG_OUTPUT_TIME=y +# CONFIG_ULOG_TIME_USING_TIMESTAMP is not set +CONFIG_ULOG_OUTPUT_LEVEL=y +CONFIG_ULOG_OUTPUT_TAG=y +# CONFIG_ULOG_OUTPUT_THREAD_NAME is not set +CONFIG_ULOG_BACKEND_USING_CONSOLE=y +# CONFIG_ULOG_USING_FILTER is not set +# CONFIG_ULOG_USING_SYSLOG is not set # CONFIG_RT_USING_UTEST is not set # @@ -247,10 +266,14 @@ CONFIG_RT_USING_POSIX=y # CONFIG_PKG_USING_WEBCLIENT is not set # CONFIG_PKG_USING_WEBNET is not set # CONFIG_PKG_USING_MONGOOSE is not set +# CONFIG_PKG_USING_MYMQTT is not set +# CONFIG_PKG_USING_KAWAII_MQTT is not set +# CONFIG_PKG_USING_BC28_MQTT is not set # CONFIG_PKG_USING_WEBTERMINAL is not set # CONFIG_PKG_USING_CJSON is not set # CONFIG_PKG_USING_JSMN is not set # CONFIG_PKG_USING_LIBMODBUS is not set +# CONFIG_PKG_USING_FREEMODBUS is not set # CONFIG_PKG_USING_LJSON is not set # CONFIG_PKG_USING_EZXML is not set # CONFIG_PKG_USING_NANOPB is not set @@ -272,6 +295,8 @@ CONFIG_RT_USING_POSIX=y # CONFIG_PKG_USING_COAP is not set # CONFIG_PKG_USING_NOPOLL is not set # CONFIG_PKG_USING_NETUTILS is not set +# CONFIG_PKG_USING_CMUX is not set +# CONFIG_PKG_USING_PPP_DEVICE is not set # CONFIG_PKG_USING_AT_DEVICE is not set # CONFIG_PKG_USING_ATSRV_SOCKET is not set # CONFIG_PKG_USING_WIZNET is not set @@ -283,10 +308,28 @@ CONFIG_RT_USING_POSIX=y # CONFIG_PKG_USING_GAGENT_CLOUD is not set # CONFIG_PKG_USING_ALI_IOTKIT is not set # CONFIG_PKG_USING_AZURE is not set -# CONFIG_PKG_USING_TENCENT_IOTKIT is not set +# CONFIG_PKG_USING_TENCENT_IOTHUB is not set +# CONFIG_PKG_USING_JIOT-C-SDK is not set +# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set +# CONFIG_PKG_USING_JOYLINK is not set # CONFIG_PKG_USING_NIMBLE is not set # CONFIG_PKG_USING_OTA_DOWNLOADER is not set # CONFIG_PKG_USING_IPMSG is not set +# CONFIG_PKG_USING_LSSDP is not set +# CONFIG_PKG_USING_AIRKISS_OPEN is not set +# CONFIG_PKG_USING_LIBRWS is not set +# CONFIG_PKG_USING_TCPSERVER is not set +# CONFIG_PKG_USING_PROTOBUF_C is not set +# CONFIG_PKG_USING_ONNX_PARSER is not set +# CONFIG_PKG_USING_ONNX_BACKEND is not set +# CONFIG_PKG_USING_DLT645 is not set +# CONFIG_PKG_USING_QXWZ is not set +# CONFIG_PKG_USING_SMTP_CLIENT is not set +# CONFIG_PKG_USING_ABUP_FOTA is not set +# CONFIG_PKG_USING_LIBCURL2RTT is not set +# CONFIG_PKG_USING_CAPNP is not set +# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set +# CONFIG_PKG_USING_AGILE_TELNET is not set # # security packages @@ -294,6 +337,7 @@ CONFIG_RT_USING_POSIX=y # CONFIG_PKG_USING_MBEDTLS is not set # CONFIG_PKG_USING_libsodium is not set # CONFIG_PKG_USING_TINYCRYPT is not set +# CONFIG_PKG_USING_TFM is not set # # language packages @@ -308,6 +352,8 @@ CONFIG_RT_USING_POSIX=y # CONFIG_PKG_USING_OPENMV is not set # CONFIG_PKG_USING_MUPDF is not set # CONFIG_PKG_USING_STEMWIN is not set +# CONFIG_PKG_USING_WAVPLAYER is not set +# CONFIG_PKG_USING_TJPGD is not set # # tools packages @@ -320,6 +366,13 @@ CONFIG_RT_USING_POSIX=y # CONFIG_PKG_USING_QRCODE is not set # CONFIG_PKG_USING_ULOG_EASYFLASH is not set # CONFIG_PKG_USING_ADBD is not set +# CONFIG_PKG_USING_COREMARK is not set +# CONFIG_PKG_USING_DHRYSTONE is not set +# CONFIG_PKG_USING_NR_MICRO_SHELL is not set +# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set +# CONFIG_PKG_USING_LUNAR_CALENDAR is not set +# CONFIG_PKG_USING_BS8116A is not set +# CONFIG_PKG_USING_URLENCODE is not set # # system packages @@ -330,6 +383,7 @@ CONFIG_RT_USING_POSIX=y # CONFIG_PKG_USING_LWEXT4 is not set # CONFIG_PKG_USING_PARTITION is not set # CONFIG_PKG_USING_FAL is not set +# CONFIG_PKG_USING_FLASHDB is not set # CONFIG_PKG_USING_SQLITE is not set # CONFIG_PKG_USING_RTI is not set # CONFIG_PKG_USING_LITTLEVGL2RTT is not set @@ -337,6 +391,11 @@ CONFIG_RT_USING_POSIX=y # CONFIG_PKG_USING_DFS_YAFFS is not set # CONFIG_PKG_USING_LITTLEFS is not set # CONFIG_PKG_USING_THREAD_POOL is not set +# CONFIG_PKG_USING_ROBOTS is not set +# CONFIG_PKG_USING_EV is not set +# CONFIG_PKG_USING_SYSWATCH is not set +# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set +# CONFIG_PKG_USING_PLCCORE is not set # # peripheral libraries and drivers @@ -344,13 +403,20 @@ CONFIG_RT_USING_POSIX=y # CONFIG_PKG_USING_SENSORS_DRIVERS is not set # CONFIG_PKG_USING_REALTEK_AMEBA is not set # CONFIG_PKG_USING_SHT2X is not set -# CONFIG_PKG_USING_AP3216C is not set +# CONFIG_PKG_USING_SHT3X is not set # CONFIG_PKG_USING_STM32_SDIO is not set # CONFIG_PKG_USING_ICM20608 is not set # CONFIG_PKG_USING_U8G2 is not set # CONFIG_PKG_USING_BUTTON is not set # CONFIG_PKG_USING_PCF8574 is not set # CONFIG_PKG_USING_SX12XX is not set +# CONFIG_PKG_USING_SIGNAL_LED is not set +# CONFIG_PKG_USING_LEDBLINK is not set +# CONFIG_PKG_USING_LITTLED is not set +# CONFIG_PKG_USING_LKDGUI is not set +# CONFIG_PKG_USING_NRF5X_SDK is not set +# CONFIG_PKG_USING_NRFX is not set +# CONFIG_PKG_USING_WM_LIBRARIES is not set CONFIG_PKG_USING_KENDRYTE_SDK=y CONFIG_PKG_KENDRYTE_SDK_PATH="/packages/peripherals/kendryte-sdk" # CONFIG_PKG_USING_KENDRYTE_SDK_V052 is not set @@ -362,8 +428,28 @@ CONFIG_PKG_KENDRYTE_SDK_VER="v0.5.5" CONFIG_PKG_KENDRYTE_SDK_VERNUM=0x0055 # CONFIG_PKG_USING_INFRARED is not set # CONFIG_PKG_USING_ROSSERIAL is not set +# CONFIG_PKG_USING_AGILE_BUTTON is not set +# CONFIG_PKG_USING_AGILE_LED is not set # CONFIG_PKG_USING_AT24CXX is not set # CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set +# CONFIG_PKG_USING_AD7746 is not set +# CONFIG_PKG_USING_PCA9685 is not set +# CONFIG_PKG_USING_I2C_TOOLS is not set +# CONFIG_PKG_USING_NRF24L01 is not set +# CONFIG_PKG_USING_TOUCH_DRIVERS is not set +# CONFIG_PKG_USING_MAX17048 is not set +# CONFIG_PKG_USING_RPLIDAR is not set +# CONFIG_PKG_USING_AS608 is not set +# CONFIG_PKG_USING_RC522 is not set +# CONFIG_PKG_USING_EMBARC_BSP is not set +# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set +# CONFIG_PKG_USING_MULTI_RTIMER is not set +# CONFIG_PKG_USING_MAX7219 is not set +# CONFIG_PKG_USING_BEEP is not set +# CONFIG_PKG_USING_EASYBLINK is not set +# CONFIG_PKG_USING_PMS_SERIES is not set +# CONFIG_PKG_USING_NUCLEI_SDK is not set +# CONFIG_PKG_USING_CAN_YMODEM is not set # # miscellaneous packages @@ -374,11 +460,15 @@ CONFIG_PKG_KENDRYTE_SDK_VERNUM=0x0055 # CONFIG_PKG_USING_MINILZO is not set # CONFIG_PKG_USING_QUICKLZ is not set # CONFIG_PKG_USING_MULTIBUTTON is not set +# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set # CONFIG_PKG_USING_CANFESTIVAL is not set # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set # CONFIG_PKG_USING_KENDRYTE_DEMO is not set +# CONFIG_PKG_USING_DIGITALCTRL is not set +# CONFIG_PKG_USING_UPACKER is not set +# CONFIG_PKG_USING_UPARAM is not set # # samples: kernel and components samples @@ -389,54 +479,39 @@ CONFIG_PKG_KENDRYTE_SDK_VERNUM=0x0055 # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set # CONFIG_PKG_USING_HELLO is not set # CONFIG_PKG_USING_VI is not set - -# -# Privated Packages of RealThread -# -# CONFIG_PKG_USING_CODEC is not set -# CONFIG_PKG_USING_PLAYER is not set -# CONFIG_PKG_USING_MPLAYER is not set -# CONFIG_PKG_USING_PERSIMMON_SRC is not set -# CONFIG_PKG_USING_JS_PERSIMMON is not set -# CONFIG_PKG_USING_JERRYSCRIPT_WIN32 is not set - -# -# Network Utilities -# -# CONFIG_PKG_USING_WICED is not set -# CONFIG_PKG_USING_CLOUDSDK is not set -# CONFIG_PKG_USING_COREMARK is not set -# CONFIG_PKG_USING_POWER_MANAGER is not set -# CONFIG_PKG_USING_RT_OTA is not set -# CONFIG_PKG_USING_RDBD_SRC is not set -# CONFIG_PKG_USING_RTINSIGHT is not set -# CONFIG_PKG_USING_SMARTCONFIG is not set -# CONFIG_PKG_USING_RTX is not set -# CONFIG_RT_USING_TESTCASE is not set -# CONFIG_PKG_USING_NGHTTP2 is not set -# CONFIG_PKG_USING_AVS is not set -# CONFIG_PKG_USING_STS is not set -# CONFIG_PKG_USING_DLMS is not set +# CONFIG_PKG_USING_NNOM is not set +# CONFIG_PKG_USING_LIBANN is not set +# CONFIG_PKG_USING_ELAPACK is not set +# CONFIG_PKG_USING_ARMv7M_DWT is not set +# CONFIG_PKG_USING_VT100 is not set +# CONFIG_PKG_USING_ULAPACK is not set +# CONFIG_PKG_USING_UKAL is not set CONFIG_BOARD_K210_EVB=y CONFIG_BSP_USING_UART_HS=y -# CONFIG_BSP_USING_UART1 is not set + +# +# General Purpose UARTs +# +CONFIG_BSP_USING_UART1=y +CONFIG_BSP_UART1_TXD_PIN=20 +CONFIG_BSP_UART1_RXD_PIN=21 # CONFIG_BSP_USING_UART2 is not set # CONFIG_BSP_USING_UART3 is not set # CONFIG_BSP_USING_I2C1 is not set CONFIG_BSP_USING_SPI1=y # CONFIG_BSP_USING_SPI1_AS_QSPI is not set -CONFIG_BSP_SPI1_CLK_PIN=29 -CONFIG_BSP_SPI1_D0_PIN=30 -CONFIG_BSP_SPI1_D1_PIN=31 +CONFIG_BSP_SPI1_CLK_PIN=27 +CONFIG_BSP_SPI1_D0_PIN=28 +CONFIG_BSP_SPI1_D1_PIN=26 CONFIG_BSP_SPI1_USING_SS0=y -CONFIG_BSP_SPI1_SS0_PIN=32 +CONFIG_BSP_SPI1_SS0_PIN=29 # CONFIG_BSP_SPI1_USING_SS1 is not set # CONFIG_BSP_SPI1_USING_SS2 is not set # CONFIG_BSP_SPI1_USING_SS3 is not set CONFIG_BSP_USING_LCD=y -CONFIG_BSP_LCD_CS_PIN=6 -CONFIG_BSP_LCD_WR_PIN=7 -CONFIG_BSP_LCD_DC_PIN=8 +CONFIG_BSP_LCD_CS_PIN=36 +CONFIG_BSP_LCD_WR_PIN=39 +CONFIG_BSP_LCD_DC_PIN=38 CONFIG_BSP_LCD_X_MAX=240 CONFIG_BSP_LCD_Y_MAX=320 CONFIG_BSP_USING_CAMERA=y diff --git a/bsp/k210/README.md b/bsp/k210/README.md index 6862b5f0a8..cdf0848444 100644 --- a/bsp/k210/README.md +++ b/bsp/k210/README.md @@ -46,14 +46,22 @@ Kendryte中文含义为勘智，而勘智取自勘物探智。这颗芯片主要 cd bsp/k210 pkgs --update +下载risc-v的工具链，[下载地址](https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack/releases) + +更新完软件包后，在`rtconfig.py`中将risc-v工具链的本地路径加入文档。 +注： +1. 工具链建议使用上方提供的，`kendryte的官方工具链`会报浮点类型不兼容的错误，`risc-v工具链8.2.0之前的版本`会出现头文件不兼容的问题。 +2. 网上传需要开启C++ 17,认为k210的神经网络编译器nncase多数语法由C++ 17,故需要开启C++ 17。个人认为没有必要，nncase是在PC端独立使用的， +作用是将神经网络模型转为kmodel格式，此格式文件为已经编译的二进制文件。（[shentalon](13212105191@163.com)注） -更新完软件包后，设置risc-v的工具链，然后执行scons编译： +然后执行scons编译： set RTT_EXEC_PATH=your_toolchains scons -来编译这个板级支持包。如果编译正确无误，会产生rtthread.elf、rtthread.bin文件。其中rtthread.bin需要烧写到设备中进行运行。 - +来编译这个板级支持包。如果编译正确无误，会产生rtthread.elf、rtthread.bin文件。其中rtthread.bin需要烧写到设备中进行运行。 +注：如果初次使用编译报错，可能是使用的SDK过老，使用`menuconfig`命令，在→ RT-Thread online packages → peripheral libraries +and drivers → the kendryte-sdk package for rt-thread中将SDK改为latest版本即可。 ## 3. 烧写及执行 连接好串口，然后使用[K-Flash](https://kendryte.com/downloads/)工具进行烧写bin文件。 diff --git a/bsp/k210/driver/Kconfig b/bsp/k210/driver/Kconfig index 8acbf5202c..f5eda34fb8 100644 --- a/bsp/k210/driver/Kconfig +++ b/bsp/k210/driver/Kconfig @@ -114,7 +114,7 @@ if BSP_USING_LCD int "CS pin number of 8080 interface" default 6 config BSP_LCD_WR_PIN - int "DC pin number of 8080 interface" + int "WR pin number of 8080 interface" default 7 config BSP_LCD_DC_PIN int "DC pin number of 8080 interface" diff --git a/bsp/k210/driver/drv_uart.c b/bsp/k210/driver/drv_uart.c index 830b14cbbc..883b5cad67 100644 --- a/bsp/k210/driver/drv_uart.c +++ b/bsp/k210/driver/drv_uart.c @@ -74,7 +74,7 @@ volatile uart_t* const _uart[3] = (volatile uart_t*)UART3_BASE_ADDR }; -void uart_init(uart_device_number_t channel) +void _uart_init(uart_device_number_t channel) { sysctl_clock_enable(SYSCTL_CLOCK_UART1 + channel); sysctl_reset(SYSCTL_RESET_UART1 + channel); @@ -142,7 +142,7 @@ int rt_hw_uart_init(void) uart->hw_base = UART1_BASE_ADDR; uart->irqno = IRQN_UART1_INTERRUPT; - uart_init(UART_DEVICE_1); + _uart_init(UART_DEVICE_1); rt_hw_serial_register(serial, "uart1", @@ -166,7 +166,7 @@ int rt_hw_uart_init(void) uart->hw_base = UART2_BASE_ADDR; uart->irqno = IRQN_UART2_INTERRUPT; - uart_init(UART_DEVICE_2); + _uart_init(UART_DEVICE_2); rt_hw_serial_register(serial, "uart2", @@ -190,7 +190,7 @@ int rt_hw_uart_init(void) uart->hw_base = UART3_BASE_ADDR; uart->irqno = IRQN_UART3_INTERRUPT; - uart_init(UART_DEVICE_3); + _uart_init(UART_DEVICE_3); rt_hw_serial_register(serial, "uart3", diff --git a/bsp/k210/rtconfig.h b/bsp/k210/rtconfig.h index 5be6b571fd..5f87d58a1d 100644 --- a/bsp/k210/rtconfig.h +++ b/bsp/k210/rtconfig.h @@ -7,34 +7,21 @@ /* RT-Thread Kernel */ #define RT_NAME_MAX 8 -/* RT_USING_ARCH_DATA_TYPE is not set */ #define RT_USING_SMP #define RT_CPUS_NR 2 #define RT_ALIGN_SIZE 8 -/* RT_THREAD_PRIORITY_8 is not set */ #define RT_THREAD_PRIORITY_32 -/* RT_THREAD_PRIORITY_256 is not set */ #define RT_THREAD_PRIORITY_MAX 32 -#define RT_TICK_PER_SECOND 100 +#define RT_TICK_PER_SECOND 1000 #define RT_USING_OVERFLOW_CHECK #define RT_USING_HOOK #define RT_USING_IDLE_HOOK #define RT_IDLE_HOOK_LIST_SIZE 4 #define IDLE_THREAD_STACK_SIZE 4096 -/* RT_USING_TIMER_SOFT is not set */ #define RT_DEBUG #define RT_DEBUG_COLOR #define RT_DEBUG_INIT_CONFIG #define RT_DEBUG_INIT 1 -/* RT_DEBUG_THREAD_CONFIG is not set */ -/* RT_DEBUG_SCHEDULER_CONFIG is not set */ -/* RT_DEBUG_IPC_CONFIG is not set */ -/* RT_DEBUG_TIMER_CONFIG is not set */ -/* RT_DEBUG_IRQ_CONFIG is not set */ -/* RT_DEBUG_MEM_CONFIG is not set */ -/* RT_DEBUG_SLAB_CONFIG is not set */ -/* RT_DEBUG_MEMHEAP_CONFIG is not set */ -/* RT_DEBUG_MODULE_CONFIG is not set */ /* Inter-Thread communication */ @@ -48,25 +35,20 @@ /* Memory Management */ #define RT_USING_MEMPOOL -/* RT_USING_MEMHEAP is not set */ -/* RT_USING_NOHEAP is not set */ -/* RT_USING_SMALL_MEM is not set */ +#define RT_USING_MEMHEAP #define RT_USING_SLAB #define RT_USING_HEAP /* Kernel Device Object */ #define RT_USING_DEVICE -/* RT_USING_DEVICE_OPS is not set */ -/* RT_USING_INTERRUPT_INFO is not set */ #define RT_USING_CONSOLE #define RT_CONSOLEBUF_SIZE 128 #define RT_CONSOLE_DEVICE_NAME "uarths" -#define RT_VER_NUM 0x40001 +#define RT_VER_NUM 0x40003 #define ARCH_CPU_64BIT #define ARCH_RISCV #define ARCH_RISCV64 -/* ARCH_CPU_STACK_GROWS_UPWARD is not set */ /* RT-Thread Components */ @@ -77,7 +59,6 @@ /* C++ features */ -/* RT_USING_CPLUSPLUS is not set */ /* Command shell */ @@ -87,11 +68,9 @@ #define FINSH_HISTORY_LINES 5 #define FINSH_USING_SYMTAB #define FINSH_USING_DESCRIPTION -/* FINSH_ECHO_DISABLE_DEFAULT is not set */ #define FINSH_THREAD_PRIORITY 20 #define FINSH_THREAD_STACK_SIZE 16384 #define FINSH_CMD_SIZE 80 -/* FINSH_USING_AUTH is not set */ #define FINSH_USING_MSH #define FINSH_USING_MSH_DEFAULT #define FINSH_USING_MSH_ONLY @@ -104,298 +83,137 @@ #define DFS_FILESYSTEMS_MAX 16 #define DFS_FILESYSTEM_TYPES_MAX 16 #define DFS_FD_MAX 64 -/* RT_USING_DFS_MNTTABLE is not set */ #define RT_USING_DFS_ELMFAT /* elm-chan's FatFs, Generic FAT Filesystem Module */ #define RT_DFS_ELM_CODE_PAGE 437 #define RT_DFS_ELM_WORD_ACCESS -/* RT_DFS_ELM_USE_LFN_0 is not set */ -/* RT_DFS_ELM_USE_LFN_1 is not set */ -/* RT_DFS_ELM_USE_LFN_2 is not set */ #define RT_DFS_ELM_USE_LFN_3 #define RT_DFS_ELM_USE_LFN 3 #define RT_DFS_ELM_MAX_LFN 255 #define RT_DFS_ELM_DRIVES 2 #define RT_DFS_ELM_MAX_SECTOR_SIZE 4096 -/* RT_DFS_ELM_USE_ERASE is not set */ #define RT_DFS_ELM_REENTRANT #define RT_USING_DFS_DEVFS -/* RT_USING_DFS_ROMFS is not set */ -/* RT_USING_DFS_RAMFS is not set */ -/* RT_USING_DFS_UFFS is not set */ -/* RT_USING_DFS_JFFS2 is not set */ /* Device Drivers */ #define RT_USING_DEVICE_IPC #define RT_PIPE_BUFSZ 512 -/* RT_USING_SYSTEM_WORKQUEUE is not set */ #define RT_USING_SERIAL #define RT_SERIAL_USING_DMA #define RT_SERIAL_RB_BUFSZ 64 -/* RT_USING_CAN is not set */ -/* RT_USING_HWTIMER is not set */ -/* RT_USING_CPUTIME is not set */ -/* RT_USING_I2C is not set */ #define RT_USING_PIN -/* RT_USING_ADC is not set */ -/* RT_USING_PWM is not set */ -/* RT_USING_MTD_NOR is not set */ -/* RT_USING_MTD_NAND is not set */ -/* RT_USING_MTD is not set */ -/* RT_USING_PM is not set */ -/* RT_USING_RTC is not set */ -/* RT_USING_SDIO is not set */ #define RT_USING_SPI -/* RT_USING_QSPI is not set */ #define RT_USING_SPI_MSD #define RT_USING_SFUD #define RT_SFUD_USING_SFDP #define RT_SFUD_USING_FLASH_INFO_TABLE -/* RT_SFUD_USING_QSPI is not set */ +#define RT_SFUD_SPI_MAX_HZ 50000000 #define RT_DEBUG_SFUD -/* RT_USING_W25QXX is not set */ -/* RT_USING_GD is not set */ -/* RT_USING_ENC28J60 is not set */ -/* RT_USING_SPI_WIFI is not set */ -/* RT_USING_WDT is not set */ -/* RT_USING_AUDIO is not set */ -/* RT_USING_SENSOR is not set */ - -/* Using WiFi */ - -/* RT_USING_WIFI is not set */ /* Using USB */ -/* RT_USING_USB_HOST is not set */ -/* RT_USING_USB_DEVICE is not set */ /* POSIX layer and C standard library */ #define RT_USING_LIBC -/* RT_USING_PTHREADS is not set */ #define RT_USING_POSIX -/* RT_USING_POSIX_MMAP is not set */ -/* RT_USING_POSIX_TERMIOS is not set */ -/* RT_USING_POSIX_AIO is not set */ -/* RT_USING_MODULE is not set */ /* Network */ /* Socket abstraction layer */ -/* RT_USING_SAL is not set */ /* Network interface device */ -/* RT_USING_NETDEV is not set */ /* light weight TCP/IP stack */ -/* RT_USING_LWIP is not set */ - -/* Modbus master and slave stack */ - -/* RT_USING_MODBUS is not set */ /* AT commands */ -/* RT_USING_AT is not set */ /* VBUS(Virtual Software BUS) */ -/* RT_USING_VBUS is not set */ /* Utilities */ -/* RT_USING_RYM is not set */ -/* RT_USING_ULOG is not set */ -/* RT_USING_UTEST is not set */ +#define RT_USING_ULOG +#define ULOG_OUTPUT_LVL_D +#define ULOG_OUTPUT_LVL 7 +#define ULOG_ASSERT_ENABLE +#define ULOG_LINE_BUF_SIZE 128 + +/* log format */ + +#define ULOG_USING_COLOR +#define ULOG_OUTPUT_TIME +#define ULOG_OUTPUT_LEVEL +#define ULOG_OUTPUT_TAG +#define ULOG_BACKEND_USING_CONSOLE /* RT-Thread online packages */ /* IoT - internet of things */ -/* PKG_USING_PAHOMQTT is not set */ -/* PKG_USING_WEBCLIENT is not set */ -/* PKG_USING_WEBNET is not set */ -/* PKG_USING_MONGOOSE is not set */ -/* PKG_USING_WEBTERMINAL is not set */ -/* PKG_USING_CJSON is not set */ -/* PKG_USING_JSMN is not set */ -/* PKG_USING_LIBMODBUS is not set */ -/* PKG_USING_LJSON is not set */ -/* PKG_USING_EZXML is not set */ -/* PKG_USING_NANOPB is not set */ /* Wi-Fi */ /* Marvell WiFi */ -/* PKG_USING_WLANMARVELL is not set */ /* Wiced WiFi */ -/* PKG_USING_WLAN_WICED is not set */ -/* PKG_USING_RW007 is not set */ -/* PKG_USING_COAP is not set */ -/* PKG_USING_NOPOLL is not set */ -/* PKG_USING_NETUTILS is not set */ -/* PKG_USING_AT_DEVICE is not set */ -/* PKG_USING_ATSRV_SOCKET is not set */ -/* PKG_USING_WIZNET is not set */ /* IoT Cloud */ -/* PKG_USING_ONENET is not set */ -/* PKG_USING_GAGENT_CLOUD is not set */ -/* PKG_USING_ALI_IOTKIT is not set */ -/* PKG_USING_AZURE is not set */ -/* PKG_USING_TENCENT_IOTKIT is not set */ -/* PKG_USING_NIMBLE is not set */ -/* PKG_USING_OTA_DOWNLOADER is not set */ -/* PKG_USING_IPMSG is not set */ /* security packages */ -/* PKG_USING_MBEDTLS is not set */ -/* PKG_USING_libsodium is not set */ -/* PKG_USING_TINYCRYPT is not set */ /* language packages */ -/* PKG_USING_LUA is not set */ -/* PKG_USING_JERRYSCRIPT is not set */ -/* PKG_USING_MICROPYTHON is not set */ /* multimedia packages */ -/* PKG_USING_OPENMV is not set */ -/* PKG_USING_MUPDF is not set */ -/* PKG_USING_STEMWIN is not set */ /* tools packages */ -/* PKG_USING_CMBACKTRACE is not set */ -/* PKG_USING_EASYFLASH is not set */ -/* PKG_USING_EASYLOGGER is not set */ -/* PKG_USING_SYSTEMVIEW is not set */ -/* PKG_USING_RDB is not set */ -/* PKG_USING_QRCODE is not set */ -/* PKG_USING_ULOG_EASYFLASH is not set */ -/* PKG_USING_ADBD is not set */ /* system packages */ -/* PKG_USING_GUIENGINE is not set */ -/* PKG_USING_CAIRO is not set */ -/* PKG_USING_PIXMAN is not set */ -/* PKG_USING_LWEXT4 is not set */ -/* PKG_USING_PARTITION is not set */ -/* PKG_USING_FAL is not set */ -/* PKG_USING_SQLITE is not set */ -/* PKG_USING_RTI is not set */ -/* PKG_USING_LITTLEVGL2RTT is not set */ -/* PKG_USING_CMSIS is not set */ -/* PKG_USING_DFS_YAFFS is not set */ -/* PKG_USING_LITTLEFS is not set */ -/* PKG_USING_THREAD_POOL is not set */ /* peripheral libraries and drivers */ -/* PKG_USING_SENSORS_DRIVERS is not set */ -/* PKG_USING_REALTEK_AMEBA is not set */ -/* PKG_USING_SHT2X is not set */ -/* PKG_USING_AP3216C is not set */ -/* PKG_USING_STM32_SDIO is not set */ -/* PKG_USING_ICM20608 is not set */ -/* PKG_USING_U8G2 is not set */ -/* PKG_USING_BUTTON is not set */ -/* PKG_USING_PCF8574 is not set */ -/* PKG_USING_SX12XX is not set */ #define PKG_USING_KENDRYTE_SDK -/* PKG_USING_KENDRYTE_SDK_V052 is not set */ -/* PKG_USING_KENDRYTE_SDK_V053 is not set */ -/* PKG_USING_KENDRYTE_SDK_V054 is not set */ #define PKG_USING_KENDRYTE_SDK_V055 -/* PKG_USING_KENDRYTE_SDK_LATEST_VERSION is not set */ #define PKG_KENDRYTE_SDK_VERNUM 0x0055 -/* PKG_USING_INFRARED is not set */ -/* PKG_USING_ROSSERIAL is not set */ -/* PKG_USING_AT24CXX is not set */ -/* PKG_USING_MOTIONDRIVER2RTT is not set */ /* miscellaneous packages */ -/* PKG_USING_LIBCSV is not set */ -/* PKG_USING_OPTPARSE is not set */ -/* PKG_USING_FASTLZ is not set */ -/* PKG_USING_MINILZO is not set */ -/* PKG_USING_QUICKLZ is not set */ -/* PKG_USING_MULTIBUTTON is not set */ -/* PKG_USING_CANFESTIVAL is not set */ -/* PKG_USING_ZLIB is not set */ -/* PKG_USING_DSTR is not set */ -/* PKG_USING_TINYFRAME is not set */ -/* PKG_USING_KENDRYTE_DEMO is not set */ /* samples: kernel and components samples */ -/* PKG_USING_KERNEL_SAMPLES is not set */ -/* PKG_USING_FILESYSTEM_SAMPLES is not set */ -/* PKG_USING_NETWORK_SAMPLES is not set */ -/* PKG_USING_PERIPHERAL_SAMPLES is not set */ -/* PKG_USING_HELLO is not set */ -/* PKG_USING_VI is not set */ - -/* Privated Packages of RealThread */ - -/* PKG_USING_CODEC is not set */ -/* PKG_USING_PLAYER is not set */ -/* PKG_USING_MPLAYER is not set */ -/* PKG_USING_PERSIMMON_SRC is not set */ -/* PKG_USING_JS_PERSIMMON is not set */ -/* PKG_USING_JERRYSCRIPT_WIN32 is not set */ - -/* Network Utilities */ - -/* PKG_USING_WICED is not set */ -/* PKG_USING_CLOUDSDK is not set */ -/* PKG_USING_COREMARK is not set */ -/* PKG_USING_POWER_MANAGER is not set */ -/* PKG_USING_RT_OTA is not set */ -/* PKG_USING_RDBD_SRC is not set */ -/* PKG_USING_RTINSIGHT is not set */ -/* PKG_USING_SMARTCONFIG is not set */ -/* PKG_USING_RTX is not set */ -/* RT_USING_TESTCASE is not set */ -/* PKG_USING_NGHTTP2 is not set */ -/* PKG_USING_AVS is not set */ -/* PKG_USING_STS is not set */ -/* PKG_USING_DLMS is not set */ #define BOARD_K210_EVB #define BSP_USING_UART_HS -/* BSP_USING_UART1 is not set */ -/* BSP_USING_UART2 is not set */ -/* BSP_USING_UART3 is not set */ -/* BSP_USING_I2C1 is not set */ + +/* General Purpose UARTs */ + +#define BSP_USING_UART1 +#define BSP_UART1_TXD_PIN 20 +#define BSP_UART1_RXD_PIN 21 #define BSP_USING_SPI1 -/* BSP_USING_SPI1_AS_QSPI is not set */ -#define BSP_SPI1_CLK_PIN 29 -#define BSP_SPI1_D0_PIN 30 -#define BSP_SPI1_D1_PIN 31 +#define BSP_SPI1_CLK_PIN 27 +#define BSP_SPI1_D0_PIN 28 +#define BSP_SPI1_D1_PIN 26 #define BSP_SPI1_USING_SS0 -#define BSP_SPI1_SS0_PIN 32 -/* BSP_SPI1_USING_SS1 is not set */ -/* BSP_SPI1_USING_SS2 is not set */ -/* BSP_SPI1_USING_SS3 is not set */ +#define BSP_SPI1_SS0_PIN 29 #define BSP_USING_LCD -#define BSP_LCD_CS_PIN 6 -#define BSP_LCD_WR_PIN 7 -#define BSP_LCD_DC_PIN 8 +#define BSP_LCD_CS_PIN 36 +#define BSP_LCD_WR_PIN 39 +#define BSP_LCD_DC_PIN 38 #define BSP_LCD_X_MAX 240 #define BSP_LCD_Y_MAX 320 #define BSP_USING_CAMERA diff --git a/bsp/stm32/README.md b/bsp/stm32/README.md index d0e2ed8ad0..684d57e783 100644 --- a/bsp/stm32/README.md +++ b/bsp/stm32/README.md @@ -21,6 +21,7 @@ STM32 系列 BSP 目前支持情况如下表所示： | [stm32f405-smdz-breadfruit](stm32f405-smdz-breadfruit) | 三木电子 SM1432F405 开发板 | | [stm32f407-st-discovery](stm32f407-st-discovery) | ST 官方 STM32F407-discovery 开发板 | | [stm32f407-atk-explorer](stm32f407-atk-explorer) | 正点原子 F407 探索者开发板 | +| [stm32f411-atk-nano](stm32f411-atk-nano/) | 正点原子 F411 NANO 开发板 | | [stm32f411-st-nucleo](stm32f411-st-nucleo/) | ST 官方 STM32F411-Nucleo-64 开发板 | | [stm32f427-robomaster-a](stm32f427-robomaster-a/) |大疆公司 RoboMaster A型开发板| | [stm32f429-st-disco](stm32f429-st-disco) | ST 官方 STM32F429-discovery 开发板 | diff --git a/bsp/stm32/stm32f411-atk-nano/.config b/bsp/stm32/stm32f411-atk-nano/.config new file mode 100644 index 0000000000..2b1ce1e252 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/.config @@ -0,0 +1,467 @@ +# +# Automatically generated file; DO NOT EDIT. +# RT-Thread Configuration +# + +# +# RT-Thread Kernel +# +CONFIG_RT_NAME_MAX=8 +# CONFIG_RT_USING_ARCH_DATA_TYPE is not set +# CONFIG_RT_USING_SMP is not set +CONFIG_RT_ALIGN_SIZE=4 +# CONFIG_RT_THREAD_PRIORITY_8 is not set +CONFIG_RT_THREAD_PRIORITY_32=y +# CONFIG_RT_THREAD_PRIORITY_256 is not set +CONFIG_RT_THREAD_PRIORITY_MAX=32 +CONFIG_RT_TICK_PER_SECOND=1000 +CONFIG_RT_USING_OVERFLOW_CHECK=y +CONFIG_RT_USING_HOOK=y +CONFIG_RT_USING_IDLE_HOOK=y +CONFIG_RT_IDLE_HOOK_LIST_SIZE=4 +CONFIG_IDLE_THREAD_STACK_SIZE=256 +# CONFIG_RT_USING_TIMER_SOFT is not set +CONFIG_RT_DEBUG=y +CONFIG_RT_DEBUG_COLOR=y +# CONFIG_RT_DEBUG_INIT_CONFIG is not set +# CONFIG_RT_DEBUG_THREAD_CONFIG is not set +# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set +# CONFIG_RT_DEBUG_IPC_CONFIG is not set +# CONFIG_RT_DEBUG_TIMER_CONFIG is not set +# CONFIG_RT_DEBUG_IRQ_CONFIG is not set +# CONFIG_RT_DEBUG_MEM_CONFIG is not set +# CONFIG_RT_DEBUG_SLAB_CONFIG is not set +# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set +# CONFIG_RT_DEBUG_MODULE_CONFIG is not set + +# +# Inter-Thread communication +# +CONFIG_RT_USING_SEMAPHORE=y +CONFIG_RT_USING_MUTEX=y +CONFIG_RT_USING_EVENT=y +CONFIG_RT_USING_MAILBOX=y +CONFIG_RT_USING_MESSAGEQUEUE=y +# CONFIG_RT_USING_SIGNALS is not set + +# +# Memory Management +# +CONFIG_RT_USING_MEMPOOL=y +# CONFIG_RT_USING_MEMHEAP is not set +# CONFIG_RT_USING_NOHEAP is not set +CONFIG_RT_USING_SMALL_MEM=y +# CONFIG_RT_USING_SLAB is not set +# CONFIG_RT_USING_MEMTRACE is not set +CONFIG_RT_USING_HEAP=y + +# +# Kernel Device Object +# +CONFIG_RT_USING_DEVICE=y +# CONFIG_RT_USING_DEVICE_OPS is not set +# CONFIG_RT_USING_INTERRUPT_INFO is not set +CONFIG_RT_USING_CONSOLE=y +CONFIG_RT_CONSOLEBUF_SIZE=128 +CONFIG_RT_CONSOLE_DEVICE_NAME="uart1" +CONFIG_RT_VER_NUM=0x40003 +CONFIG_ARCH_ARM=y +CONFIG_RT_USING_CPU_FFS=y +CONFIG_ARCH_ARM_CORTEX_M=y +CONFIG_ARCH_ARM_CORTEX_M4=y +# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set + +# +# RT-Thread Components +# +CONFIG_RT_USING_COMPONENTS_INIT=y +CONFIG_RT_USING_USER_MAIN=y +CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048 +CONFIG_RT_MAIN_THREAD_PRIORITY=10 + +# +# C++ features +# +# CONFIG_RT_USING_CPLUSPLUS is not set + +# +# Command shell +# +CONFIG_RT_USING_FINSH=y +CONFIG_FINSH_THREAD_NAME="tshell" +CONFIG_FINSH_USING_HISTORY=y +CONFIG_FINSH_HISTORY_LINES=5 +CONFIG_FINSH_USING_SYMTAB=y +CONFIG_FINSH_USING_DESCRIPTION=y +# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set +CONFIG_FINSH_THREAD_PRIORITY=20 +CONFIG_FINSH_THREAD_STACK_SIZE=4096 +CONFIG_FINSH_CMD_SIZE=80 +# CONFIG_FINSH_USING_AUTH is not set +CONFIG_FINSH_USING_MSH=y +CONFIG_FINSH_USING_MSH_DEFAULT=y +CONFIG_FINSH_USING_MSH_ONLY=y +CONFIG_FINSH_ARG_MAX=10 + +# +# Device virtual file system +# +# CONFIG_RT_USING_DFS is not set + +# +# Device Drivers +# +CONFIG_RT_USING_DEVICE_IPC=y +CONFIG_RT_PIPE_BUFSZ=512 +# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set +CONFIG_RT_USING_SERIAL=y +CONFIG_RT_SERIAL_USING_DMA=y +CONFIG_RT_SERIAL_RB_BUFSZ=64 +# CONFIG_RT_USING_CAN is not set +# CONFIG_RT_USING_HWTIMER is not set +# CONFIG_RT_USING_CPUTIME is not set +CONFIG_RT_USING_I2C=y +# CONFIG_RT_I2C_DEBUG is not set +CONFIG_RT_USING_I2C_BITOPS=y +# CONFIG_RT_I2C_BITOPS_DEBUG is not set +CONFIG_RT_USING_PIN=y +# CONFIG_RT_USING_ADC is not set +# CONFIG_RT_USING_PWM is not set +# CONFIG_RT_USING_MTD_NOR is not set +# CONFIG_RT_USING_MTD_NAND is not set +# CONFIG_RT_USING_PM is not set +CONFIG_RT_USING_RTC=y +# CONFIG_RT_USING_ALARM is not set +# CONFIG_RT_USING_SOFT_RTC is not set +# CONFIG_RT_USING_SDIO is not set +CONFIG_RT_USING_SPI=y +# CONFIG_RT_USING_QSPI is not set +# CONFIG_RT_USING_SPI_MSD is not set +CONFIG_RT_USING_SFUD=y +CONFIG_RT_SFUD_USING_SFDP=y +CONFIG_RT_SFUD_USING_FLASH_INFO_TABLE=y +# CONFIG_RT_SFUD_USING_QSPI is not set +CONFIG_RT_SFUD_SPI_MAX_HZ=50000000 +# CONFIG_RT_DEBUG_SFUD is not set +# CONFIG_RT_USING_ENC28J60 is not set +# CONFIG_RT_USING_SPI_WIFI is not set +CONFIG_RT_USING_WDT=y +# CONFIG_RT_USING_AUDIO is not set +# CONFIG_RT_USING_SENSOR is not set +# CONFIG_RT_USING_TOUCH is not set +# CONFIG_RT_USING_HWCRYPTO is not set +# CONFIG_RT_USING_PULSE_ENCODER is not set +# CONFIG_RT_USING_INPUT_CAPTURE is not set +# CONFIG_RT_USING_WIFI is not set + +# +# Using USB +# +# CONFIG_RT_USING_USB_HOST is not set +# CONFIG_RT_USING_USB_DEVICE is not set + +# +# POSIX layer and C standard library +# +CONFIG_RT_USING_LIBC=y +# CONFIG_RT_USING_PTHREADS is not set +# CONFIG_RT_USING_MODULE is not set + +# +# Network +# + +# +# Socket abstraction layer +# +# CONFIG_RT_USING_SAL is not set + +# +# Network interface device +# +# CONFIG_RT_USING_NETDEV is not set + +# +# light weight TCP/IP stack +# +# CONFIG_RT_USING_LWIP is not set + +# +# AT commands +# +# CONFIG_RT_USING_AT is not set + +# +# VBUS(Virtual Software BUS) +# +# CONFIG_RT_USING_VBUS is not set + +# +# Utilities +# +# CONFIG_RT_USING_RYM is not set +# CONFIG_RT_USING_ULOG is not set +# CONFIG_RT_USING_UTEST is not set +# CONFIG_RT_USING_LWP is not set + +# +# RT-Thread online packages +# + +# +# IoT - internet of things +# +# CONFIG_PKG_USING_PAHOMQTT is not set +# CONFIG_PKG_USING_WEBCLIENT is not set +# CONFIG_PKG_USING_WEBNET is not set +# CONFIG_PKG_USING_MONGOOSE is not set +# CONFIG_PKG_USING_MYMQTT is not set +# CONFIG_PKG_USING_KAWAII_MQTT is not set +# CONFIG_PKG_USING_BC28_MQTT is not set +# CONFIG_PKG_USING_WEBTERMINAL is not set +# CONFIG_PKG_USING_CJSON is not set +# CONFIG_PKG_USING_JSMN is not set +# CONFIG_PKG_USING_LIBMODBUS is not set +# CONFIG_PKG_USING_FREEMODBUS is not set +# CONFIG_PKG_USING_LJSON is not set +# CONFIG_PKG_USING_EZXML is not set +# CONFIG_PKG_USING_NANOPB is not set + +# +# Wi-Fi +# + +# +# Marvell WiFi +# +# CONFIG_PKG_USING_WLANMARVELL is not set + +# +# Wiced WiFi +# +# CONFIG_PKG_USING_WLAN_WICED is not set +# CONFIG_PKG_USING_RW007 is not set +# CONFIG_PKG_USING_COAP is not set +# CONFIG_PKG_USING_NOPOLL is not set +# CONFIG_PKG_USING_NETUTILS is not set +# CONFIG_PKG_USING_CMUX is not set +# CONFIG_PKG_USING_PPP_DEVICE is not set +# CONFIG_PKG_USING_AT_DEVICE is not set +# CONFIG_PKG_USING_ATSRV_SOCKET is not set +# CONFIG_PKG_USING_WIZNET is not set + +# +# IoT Cloud +# +# CONFIG_PKG_USING_ONENET is not set +# CONFIG_PKG_USING_GAGENT_CLOUD is not set +# CONFIG_PKG_USING_ALI_IOTKIT is not set +# CONFIG_PKG_USING_AZURE is not set +# CONFIG_PKG_USING_TENCENT_IOTHUB is not set +# CONFIG_PKG_USING_JIOT-C-SDK is not set +# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set +# CONFIG_PKG_USING_JOYLINK is not set +# CONFIG_PKG_USING_NIMBLE is not set +# CONFIG_PKG_USING_OTA_DOWNLOADER is not set +# CONFIG_PKG_USING_IPMSG is not set +# CONFIG_PKG_USING_LSSDP is not set +# CONFIG_PKG_USING_AIRKISS_OPEN is not set +# CONFIG_PKG_USING_LIBRWS is not set +# CONFIG_PKG_USING_TCPSERVER is not set +# CONFIG_PKG_USING_PROTOBUF_C is not set +# CONFIG_PKG_USING_ONNX_PARSER is not set +# CONFIG_PKG_USING_ONNX_BACKEND is not set +# CONFIG_PKG_USING_DLT645 is not set +# CONFIG_PKG_USING_QXWZ is not set +# CONFIG_PKG_USING_SMTP_CLIENT is not set +# CONFIG_PKG_USING_ABUP_FOTA is not set +# CONFIG_PKG_USING_LIBCURL2RTT is not set +# CONFIG_PKG_USING_CAPNP is not set +# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set +# CONFIG_PKG_USING_AGILE_TELNET is not set + +# +# security packages +# +# CONFIG_PKG_USING_MBEDTLS is not set +# CONFIG_PKG_USING_libsodium is not set +# CONFIG_PKG_USING_TINYCRYPT is not set +# CONFIG_PKG_USING_TFM is not set + +# +# language packages +# +# CONFIG_PKG_USING_LUA is not set +# CONFIG_PKG_USING_JERRYSCRIPT is not set +# CONFIG_PKG_USING_MICROPYTHON is not set + +# +# multimedia packages +# +# CONFIG_PKG_USING_OPENMV is not set +# CONFIG_PKG_USING_MUPDF is not set +# CONFIG_PKG_USING_STEMWIN is not set +# CONFIG_PKG_USING_WAVPLAYER is not set +# CONFIG_PKG_USING_TJPGD is not set + +# +# tools packages +# +# CONFIG_PKG_USING_CMBACKTRACE is not set +# CONFIG_PKG_USING_EASYFLASH is not set +# CONFIG_PKG_USING_EASYLOGGER is not set +# CONFIG_PKG_USING_SYSTEMVIEW is not set +# CONFIG_PKG_USING_RDB is not set +# CONFIG_PKG_USING_QRCODE is not set +# CONFIG_PKG_USING_ULOG_EASYFLASH is not set +# CONFIG_PKG_USING_ADBD is not set +# CONFIG_PKG_USING_COREMARK is not set +# CONFIG_PKG_USING_DHRYSTONE is not set +# CONFIG_PKG_USING_NR_MICRO_SHELL is not set +# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set +# CONFIG_PKG_USING_LUNAR_CALENDAR is not set +# CONFIG_PKG_USING_BS8116A is not set +# CONFIG_PKG_USING_URLENCODE is not set + +# +# system packages +# +# CONFIG_PKG_USING_GUIENGINE is not set +# CONFIG_PKG_USING_PERSIMMON is not set +# CONFIG_PKG_USING_CAIRO is not set +# CONFIG_PKG_USING_PIXMAN is not set +# CONFIG_PKG_USING_LWEXT4 is not set +# CONFIG_PKG_USING_PARTITION is not set +# CONFIG_PKG_USING_FAL is not set +# CONFIG_PKG_USING_SQLITE is not set +# CONFIG_PKG_USING_RTI is not set +# CONFIG_PKG_USING_LITTLEVGL2RTT is not set +# CONFIG_PKG_USING_CMSIS is not set +# CONFIG_PKG_USING_DFS_YAFFS is not set +# CONFIG_PKG_USING_LITTLEFS is not set +# CONFIG_PKG_USING_THREAD_POOL is not set +# CONFIG_PKG_USING_ROBOTS is not set +# CONFIG_PKG_USING_EV is not set +# CONFIG_PKG_USING_SYSWATCH is not set +# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set +# CONFIG_PKG_USING_PLCCORE is not set + +# +# peripheral libraries and drivers +# +# CONFIG_PKG_USING_SENSORS_DRIVERS is not set +# CONFIG_PKG_USING_REALTEK_AMEBA is not set +# CONFIG_PKG_USING_SHT2X is not set +# CONFIG_PKG_USING_SHT3X is not set +# CONFIG_PKG_USING_STM32_SDIO is not set +# CONFIG_PKG_USING_ICM20608 is not set +# CONFIG_PKG_USING_U8G2 is not set +# CONFIG_PKG_USING_BUTTON is not set +# CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_SX12XX is not set +# CONFIG_PKG_USING_SIGNAL_LED is not set +# CONFIG_PKG_USING_LEDBLINK is not set +# CONFIG_PKG_USING_LITTLED is not set +# CONFIG_PKG_USING_LKDGUI is not set +# CONFIG_PKG_USING_NRF5X_SDK is not set +# CONFIG_PKG_USING_NRFX is not set +# CONFIG_PKG_USING_WM_LIBRARIES is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set +# CONFIG_PKG_USING_INFRARED is not set +# CONFIG_PKG_USING_ROSSERIAL is not set +# CONFIG_PKG_USING_AGILE_BUTTON is not set +# CONFIG_PKG_USING_AGILE_LED is not set +# CONFIG_PKG_USING_AT24CXX is not set +# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set +# CONFIG_PKG_USING_AD7746 is not set +# CONFIG_PKG_USING_PCA9685 is not set +# CONFIG_PKG_USING_I2C_TOOLS is not set +# CONFIG_PKG_USING_NRF24L01 is not set +# CONFIG_PKG_USING_TOUCH_DRIVERS is not set +# CONFIG_PKG_USING_MAX17048 is not set +# CONFIG_PKG_USING_RPLIDAR is not set +# CONFIG_PKG_USING_AS608 is not set +# CONFIG_PKG_USING_RC522 is not set +# CONFIG_PKG_USING_EMBARC_BSP is not set +# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set +# CONFIG_PKG_USING_MULTI_RTIMER is not set +# CONFIG_PKG_USING_MAX7219 is not set +# CONFIG_PKG_USING_BEEP is not set +# CONFIG_PKG_USING_EASYBLINK is not set +# CONFIG_PKG_USING_PMS_SERIES is not set +# CONFIG_PKG_USING_CAN_YMODEM is not set + +# +# miscellaneous packages +# +# CONFIG_PKG_USING_LIBCSV is not set +# CONFIG_PKG_USING_OPTPARSE is not set +# CONFIG_PKG_USING_FASTLZ is not set +# CONFIG_PKG_USING_MINILZO is not set +# CONFIG_PKG_USING_QUICKLZ is not set +# CONFIG_PKG_USING_MULTIBUTTON is not set +# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set +# CONFIG_PKG_USING_CANFESTIVAL is not set +# CONFIG_PKG_USING_ZLIB is not set +# CONFIG_PKG_USING_DSTR is not set +# CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set +# CONFIG_PKG_USING_DIGITALCTRL is not set +# CONFIG_PKG_USING_UPACKER is not set +# CONFIG_PKG_USING_UPARAM is not set + +# +# samples: kernel and components samples +# +# CONFIG_PKG_USING_KERNEL_SAMPLES is not set +# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set +# CONFIG_PKG_USING_NETWORK_SAMPLES is not set +# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set +# CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set +# CONFIG_PKG_USING_NNOM is not set +# CONFIG_PKG_USING_LIBANN is not set +# CONFIG_PKG_USING_ELAPACK is not set +# CONFIG_PKG_USING_ARMv7M_DWT is not set +# CONFIG_PKG_USING_VT100 is not set +# CONFIG_PKG_USING_ULAPACK is not set +# CONFIG_PKG_USING_UKAL is not set +CONFIG_SOC_FAMILY_STM32=y +CONFIG_SOC_SERIES_STM32F4=y + +# +# Hardware Drivers Config +# +CONFIG_SOC_STM32F411RC=y + +# +# Onboard Peripheral Drivers +# +CONFIG_BSP_USING_USB_TO_USART=y +# CONFIG_BSP_USING_EEPROM is not set +# CONFIG_BSP_USING_SPI_FLASH is not set +# CONFIG_BSP_USING_POT is not set + +# +# On-chip Peripheral Drivers +# +CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y +CONFIG_BSP_USING_UART1=y +CONFIG_BSP_UART1_RX_USING_DMA=y +# CONFIG_BSP_USING_UART2 is not set +# CONFIG_BSP_USING_TIM is not set +# CONFIG_BSP_USING_SPI is not set +# CONFIG_BSP_USING_I2C1 is not set +# CONFIG_BSP_USING_ADC is not set +# CONFIG_BSP_USING_ON_CHIP_FLASH is not set +# CONFIG_BSP_USING_ONCHIP_RTC is not set +# CONFIG_BSP_RTC_USING_LSE is not set +# CONFIG_BSP_RTC_USING_LSI is not set +# CONFIG_BSP_USING_WDT is not set +# CONFIG_BSP_USING_RNG is not set +# CONFIG_BSP_USING_UDID is not set + +# +# Board extended module Drivers +# diff --git a/bsp/stm32/stm32f411-atk-nano/.gitignore b/bsp/stm32/stm32f411-atk-nano/.gitignore new file mode 100644 index 0000000000..7221bde019 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/.gitignore @@ -0,0 +1,42 @@ +*.pyc +*.map +*.dblite +*.elf +*.bin +*.hex +*.axf +*.exe +*.pdb +*.idb +*.ilk +*.old +build +Debug +documentation/html +packages/ +*~ +*.o +*.obj +*.out +*.bak +*.dep +*.lib +*.i +*.d +.DS_Stor* +.config 3 +.config 4 +.config 5 +Midea-X1 +*.uimg +GPATH +GRTAGS +GTAGS +.vscode +JLinkLog.txt +JLinkSettings.ini +DebugConfig/ +RTE/ +settings/ +*.uvguix* +cconfig.h diff --git a/bsp/stm32/stm32f411-atk-nano/Kconfig b/bsp/stm32/stm32f411-atk-nano/Kconfig new file mode 100644 index 0000000000..8cbc7b71a8 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/Kconfig @@ -0,0 +1,21 @@ +mainmenu "RT-Thread Configuration" + +config BSP_DIR + string + option env="BSP_ROOT" + default "." + +config RTT_DIR + string + option env="RTT_ROOT" + default "../../.." + +config PKGS_DIR + string + option env="PKGS_ROOT" + default "packages" + +source "$RTT_DIR/Kconfig" +source "$PKGS_DIR/Kconfig" +source "../libraries/Kconfig" +source "board/Kconfig" diff --git a/bsp/stm32/stm32f411-atk-nano/README.md b/bsp/stm32/stm32f411-atk-nano/README.md new file mode 100644 index 0000000000..917675cc4c --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/README.md @@ -0,0 +1,117 @@ +# STM32F411RCT ATK-NANO 开发板 BSP 说明 + +## 简介 + +本文档为正点原子 STM32F411RCT NANO 开发板提供的 BSP (板级支持包) 说明。 + +主要内容如下： + +- 开发板资源介绍 +- BSP 快速上手 +- 进阶使用方法 + +通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。 + +## 开发板介绍 + +ATK-NANO STM32F411RCT 是正点原子推出的一款基于 ARM Cortex-M4 内核的开发板，最高主频为 100Mhz，该开发板具有丰富的板载资源，可以充分发挥 STM32F411RCT 的芯片性能。 + +开发板外观如下图所示： + +![board](figures/board.png) + +该开发板常用 **板载资源** 如下： + +- MCU：STM32F411RCT6，主频 100MHz，256KB FLASH ，128KB RAM +- 外部 FLASH：W25Q16（SPI，2MB）、EEPROM（24c02） +- 常用外设 + - LED：8个，（红色，PC0-PC7） + - 按键：4个，KEY_UP（兼具唤醒功能，PA0），KEY0（PC8），KEY1（PC9），KEY2（PD2） +- 常用接口：USB 转串口、DS18B20/DHT11 接口 、USB SLAVE +- 调试接口：板载的 ST-LINK SWD 下载 + +开发板更多详细信息请参考正点原子 [STM32F411RCT ATK NANO 开发板介绍](https://item.taobao.com/item.htm?&id=608105447281)。 + +## 外设支持 + +本 BSP 目前对外设的支持情况如下： + +| **板载外设** | **支持情况** | **备注** | +| :----------------- | :----------: | -------------------------------------- | +| USB 转串口 | 支持 | 使用 UART1 | +| SPI Flash | 支持 | 使用 SPI2 | +| 电位器 | 支持 | 使用 ADC1 | +| **片上外设** | **支持情况** | **备注** | +| GPIO | 支持 | PA0, PA1...PD2 ---> PIN: 0, 1...63 | +| UART | 支持 | UART1/2 | +| SPI | 支持 | SPI2 | +| I2C | 支持 | 软件 I2C | +| RTC | 支持 | 支持外部晶振和内部低速时钟 | +| WDT | 支持 | | +| ADC | 支持 | | +| **扩展模块** | **支持情况** | **备注** | +| DS18B20/DHT11 | 暂不支持 | | + +## 使用说明 + +使用说明分为如下两个章节： + +- 快速上手 + + 本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。 + +- 进阶使用 + + 本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。 + + +### 快速上手 + +本 BSP 为开发者提供 MDK4、MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。 + +#### 硬件连接 + +使用数据线连接开发板到 PC，打开电源开关。 + +#### 编译下载 + +双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。 + +> 工程默认配置使用 JLink 仿真器下载程序，在通过 JLink 连接开发板的基础上，点击下载按钮即可下载程序到开发板 + +#### 运行结果 + +下载程序成功之后，系统会自动运行，观察开发板上 LED 的运行效果，红色 LED0 会周期性闪烁。 + +连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息: + +```bash + \ | / +- RT - Thread Operating System + / | \ 3.1.1 build Nov 19 2018 + 2006 - 2018 Copyright by rt-thread team +msh > +``` +### 进阶使用 + +此 BSP 默认只开启了 GPIO 和 串口1 的功能，如果需使用Flash 等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下： + +1. 在 bsp 下打开 env 工具。 + +2. 输入`menuconfig`命令配置工程，配置好之后保存退出。 + +3. 输入`pkgs --update`命令更新软件包。 + +4. 输入`scons --target=mdk4/mdk5/iar` 命令重新生成工程。 + +本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。 + +## 注意事项 + +- N/A + +## 联系人信息 + +维护人: + +- bigaij, 邮箱： \ No newline at end of file diff --git a/bsp/stm32/stm32f411-atk-nano/SConscript b/bsp/stm32/stm32f411-atk-nano/SConscript new file mode 100644 index 0000000000..20f7689c53 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/SConscript @@ -0,0 +1,15 @@ +# for module compiling +import os +Import('RTT_ROOT') +from building import * + +cwd = GetCurrentDir() +objs = [] +list = os.listdir(cwd) + +for d in list: + path = os.path.join(cwd, d) + if os.path.isfile(os.path.join(path, 'SConscript')): + objs = objs + SConscript(os.path.join(d, 'SConscript')) + +Return('objs') diff --git a/bsp/stm32/stm32f411-atk-nano/SConstruct b/bsp/stm32/stm32f411-atk-nano/SConstruct new file mode 100644 index 0000000000..945cb55a52 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/SConstruct @@ -0,0 +1,60 @@ +import os +import sys +import rtconfig + +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') +else: + RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..') + +sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')] +try: + from building import * +except: + print('Cannot found RT-Thread root directory, please check RTT_ROOT') + print(RTT_ROOT) + exit(-1) + +TARGET = 'rt-thread.' + rtconfig.TARGET_EXT + +DefaultEnvironment(tools=[]) +env = Environment(tools = ['mingw'], + AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS, + CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS, + AR = rtconfig.AR, ARFLAGS = '-rc', + CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS, + LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS) +env.PrependENVPath('PATH', rtconfig.EXEC_PATH) + +if rtconfig.PLATFORM == 'iar': + env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES']) + env.Replace(ARFLAGS = ['']) + env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map') + +Export('RTT_ROOT') +Export('rtconfig') + +SDK_ROOT = os.path.abspath('./') + +if os.path.exists(SDK_ROOT + '/libraries'): + libraries_path_prefix = SDK_ROOT + '/libraries' +else: + libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries' + +SDK_LIB = libraries_path_prefix +Export('SDK_LIB') + +# prepare building environment +objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False) + +stm32_library = 'STM32F4xx_HAL' +rtconfig.BSP_LIBRARY_TYPE = stm32_library + +# include libraries +objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript'))) + +# include drivers +objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript'))) + +# make a building +DoBuilding(TARGET, objs) diff --git a/bsp/stm32/stm32f411-atk-nano/applications/SConscript b/bsp/stm32/stm32f411-atk-nano/applications/SConscript new file mode 100644 index 0000000000..6f66f7ab73 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/applications/SConscript @@ -0,0 +1,12 @@ +import rtconfig +from building import * + +cwd = GetCurrentDir() +CPPPATH = [cwd, str(Dir('#'))] +src = Split(""" +main.c +""") + +group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/stm32/stm32f411-atk-nano/applications/main.c b/bsp/stm32/stm32f411-atk-nano/applications/main.c new file mode 100644 index 0000000000..943b08cf15 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/applications/main.c @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2020-05-11 bigaij first version + */ + +#include +#include +#include + +/* defined the LED0 pin: PC0 */ +#define LED0_PIN GET_PIN(C, 0) + +int main(void) +{ + int count = 1; + /* set LED0 pin mode to output */ + rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT); + + while (count++) + { + rt_pin_write(LED0_PIN, PIN_HIGH); + rt_thread_mdelay(500); + rt_pin_write(LED0_PIN, PIN_LOW); + rt_thread_mdelay(500); + } + + return RT_EOK; +} diff --git a/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/.mxproject b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/.mxproject new file mode 100644 index 0000000000..cc96a382b8 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/.mxproject @@ -0,0 +1,18 @@ +[PreviousGenFiles] +HeaderPath=D:/Repo/rt-thread-git/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Inc +HeaderFiles=stm32f4xx_it.h;stm32f4xx_hal_conf.h;main.h; +SourcePath=D:/Repo/rt-thread-git/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src +SourceFiles=stm32f4xx_it.c;stm32f4xx_hal_msp.c;main.c; + +[PreviousLibFiles] +LibFiles=Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_iwdg.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_iwdg.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f411xe.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/system_stm32f4xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h; + +[PreviousUsedIarFiles] +SourceFiles=..\Src\main.c;..\Src\stm32f4xx_it.c;..\Src\stm32f4xx_hal_msp.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;../\Src/system_stm32f4xx.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;../\Src/system_stm32f4xx.c;../Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;null; +HeaderPath=..\Drivers\STM32F4xx_HAL_Driver\Inc;..\Drivers\STM32F4xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32F4xx\Include;..\Drivers\CMSIS\Include;..\Inc; + +[PreviousUsedKeilFiles] +SourceFiles=..\Src\main.c;..\Src\stm32f4xx_it.c;..\Src\stm32f4xx_hal_msp.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;..\\Src/system_stm32f4xx.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;..\\Src/system_stm32f4xx.c;..\Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;; +HeaderPath=..\Drivers\STM32F4xx_HAL_Driver\Inc;..\Drivers\STM32F4xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32F4xx\Include;..\Drivers\CMSIS\Include;..\Inc; +CDefines=USE_HAL_DRIVER;STM32F411xE;USE_HAL_DRIVER;USE_HAL_DRIVER; + diff --git a/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/CubeMX_Config.ioc new file mode 100644 index 0000000000..1791e31d5e --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/CubeMX_Config.ioc @@ -0,0 +1,169 @@ +#MicroXplorer Configuration settings - do not modify +ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_9 +ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,master +ADC1.NbrOfConversionFlag=1 +ADC1.Rank-0\#ChannelRegularConversion=1 +ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_3CYCLES +ADC1.master=1 +File.Version=6 +KeepUserPlacement=false +Mcu.Family=STM32F4 +Mcu.IP0=ADC1 +Mcu.IP1=I2C1 +Mcu.IP2=IWDG +Mcu.IP3=NVIC +Mcu.IP4=RCC +Mcu.IP5=RTC +Mcu.IP6=SPI2 +Mcu.IP7=SYS +Mcu.IP8=USART1 +Mcu.IP9=USART2 +Mcu.IPNb=10 +Mcu.Name=STM32F411R(C-E)Tx +Mcu.Package=LQFP64 +Mcu.Pin0=PC14-OSC32_IN +Mcu.Pin1=PC15-OSC32_OUT +Mcu.Pin10=PA9 +Mcu.Pin11=PA10 +Mcu.Pin12=PA13 +Mcu.Pin13=PA14 +Mcu.Pin14=PB6 +Mcu.Pin15=PB7 +Mcu.Pin16=VP_IWDG_VS_IWDG +Mcu.Pin17=VP_RTC_VS_RTC_Activate +Mcu.Pin18=VP_SYS_VS_Systick +Mcu.Pin2=PH0 - OSC_IN +Mcu.Pin3=PH1 - OSC_OUT +Mcu.Pin4=PA2 +Mcu.Pin5=PA3 +Mcu.Pin6=PB1 +Mcu.Pin7=PB13 +Mcu.Pin8=PB14 +Mcu.Pin9=PB15 +Mcu.PinsNb=19 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32F411RCTx +MxCube.Version=5.0.0 +MxDb.Version=DB.5.0.0 +NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.ForceEnableDMAVector=true +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 +NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true +NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +PA10.Mode=Asynchronous +PA10.Signal=USART1_RX +PA13.Mode=Serial_Wire +PA13.Signal=SYS_JTMS-SWDIO +PA14.Mode=Serial_Wire +PA14.Signal=SYS_JTCK-SWCLK +PA2.Mode=Asynchronous +PA2.Signal=USART2_TX +PA3.Mode=Asynchronous +PA3.Signal=USART2_RX +PA9.Mode=Asynchronous +PA9.Signal=USART1_TX +PB1.Locked=true +PB1.Signal=ADCx_IN9 +PB13.Locked=true +PB13.Mode=Full_Duplex_Master +PB13.Signal=SPI2_SCK +PB14.Locked=true +PB14.Mode=Full_Duplex_Master +PB14.Signal=SPI2_MISO +PB15.Locked=true +PB15.Mode=Full_Duplex_Master +PB15.Signal=SPI2_MOSI +PB6.Mode=I2C +PB6.Signal=I2C1_SCL +PB7.Mode=I2C +PB7.Signal=I2C1_SDA +PC14-OSC32_IN.Mode=LSE-External-Oscillator +PC14-OSC32_IN.Signal=RCC_OSC32_IN +PC15-OSC32_OUT.Mode=LSE-External-Oscillator +PC15-OSC32_OUT.Signal=RCC_OSC32_OUT +PH0\ -\ OSC_IN.Mode=HSE-External-Oscillator +PH0\ -\ OSC_IN.Signal=RCC_OSC_IN +PH1\ -\ OSC_OUT.Mode=HSE-External-Oscillator +PH1\ -\ OSC_OUT.Signal=RCC_OSC_OUT +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32F411RCTx +ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.23.0 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=0 +ProjectManager.MainLocation=Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain= +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=CubeMX_Config.ioc +ProjectManager.ProjectName=CubeMX_Config +ProjectManager.StackSize=0x400 +ProjectManager.TargetToolchain=MDK-ARM V5 +ProjectManager.ToolChainLocation= +ProjectManager.UnderRoot=false +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_SPI2_Init-SPI2-false-HAL-true,5-MX_I2C1_Init-I2C1-false-HAL-true,6-MX_ADC1_Init-ADC1-false-HAL-true,7-MX_USART2_UART_Init-USART2-false-HAL-true,8-MX_IWDG_Init-IWDG-false-HAL-true +RCC.48MHZClocksFreq_Value=48000000 +RCC.AHBFreq_Value=96000000 +RCC.APB1CLKDivider=RCC_HCLK_DIV2 +RCC.APB1Freq_Value=48000000 +RCC.APB1TimFreq_Value=96000000 +RCC.APB2Freq_Value=96000000 +RCC.APB2TimFreq_Value=96000000 +RCC.CortexFreq_Value=96000000 +RCC.EthernetFreq_Value=96000000 +RCC.FCLKCortexFreq_Value=96000000 +RCC.FamilyName=M +RCC.HCLKFreq_Value=96000000 +RCC.HSE_VALUE=25000000 +RCC.HSI_VALUE=16000000 +RCC.I2SClocksFreq_Value=96000000 +RCC.IPParameters=48MHZClocksFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2SClocksFreq_Value,LSI_VALUE,MCO2PinFreq_Value,PLLCLKFreq_Value,PLLQCLKFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOInputMFreq_Value,VCOOutputFreq_Value,VcooutputI2S +RCC.LSI_VALUE=32000 +RCC.MCO2PinFreq_Value=96000000 +RCC.PLLCLKFreq_Value=96000000 +RCC.PLLQCLKFreq_Value=48000000 +RCC.RTCFreq_Value=32000 +RCC.RTCHSEDivFreq_Value=12500000 +RCC.SYSCLKFreq_VALUE=96000000 +RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK +RCC.VCOI2SOutputFreq_Value=192000000 +RCC.VCOInputFreq_Value=1000000 +RCC.VCOInputMFreq_Value=1000000 +RCC.VCOOutputFreq_Value=192000000 +RCC.VcooutputI2S=96000000 +SH.ADCx_IN9.0=ADC1_IN9,IN9 +SH.ADCx_IN9.ConfNb=1 +SPI2.CalculateBaudRate=24.0 MBits/s +SPI2.Direction=SPI_DIRECTION_2LINES +SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate +SPI2.Mode=SPI_MODE_MASTER +SPI2.VirtualType=VM_MASTER +USART1.IPParameters=VirtualMode +USART1.VirtualMode=VM_ASYNC +USART2.IPParameters=VirtualMode +USART2.VirtualMode=VM_ASYNC +VP_IWDG_VS_IWDG.Mode=IWDG_Activate +VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG +VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled +VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate +VP_SYS_VS_Systick.Mode=SysTick +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +board=custom diff --git a/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Inc/main.h b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Inc/main.h new file mode 100644 index 0000000000..9d41187606 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Inc/main.h @@ -0,0 +1,91 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + ** This notice applies to any and all portions of this file + * that are not between comment pairs USER CODE BEGIN and + * USER CODE END. Other portions of this file, whether + * inserted by the user or by software development tools + * are owned by their respective copyright owners. + * + * COPYRIGHT(c) 2018 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h new file mode 100644 index 0000000000..fb44bd3733 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h @@ -0,0 +1,451 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf.h + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2020 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED + +#define HAL_ADC_MODULE_ENABLED +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_I2C_MODULE_ENABLED +/* #define HAL_I2S_MODULE_ENABLED */ +#define HAL_IWDG_MODULE_ENABLED +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_RNG_MODULE_ENABLED */ +#define HAL_RTC_MODULE_ENABLED +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ +#define HAL_SPI_MODULE_ENABLED +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_FMPI2C_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_EXTI_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848_PHY_ADDRESS Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) + +#define PHY_READ_TO ((uint32_t)0x0000FFFFU) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ +#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f4xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_FMPI2C_MODULE_ENABLED + #include "stm32f4xx_hal_fmpi2c.h" +#endif /* HAL_FMPI2C_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f4xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Inc/stm32f4xx_it.h b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Inc/stm32f4xx_it.h new file mode 100644 index 0000000000..7a788c296b --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Inc/stm32f4xx_it.h @@ -0,0 +1,84 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32f4xx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * + * COPYRIGHT(c) 2018 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_IT_H +#define __STM32F4xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_IT_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src/main.c b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src/main.c new file mode 100644 index 0000000000..27fc81afd2 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src/main.c @@ -0,0 +1,501 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.c + * @brief : Main program body + ****************************************************************************** + ** This notice applies to any and all portions of this file + * that are not between comment pairs USER CODE BEGIN and + * USER CODE END. Other portions of this file, whether + * inserted by the user or by software development tools + * are owned by their respective copyright owners. + * + * COPYRIGHT(c) 2018 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN PTD */ + +/* USER CODE END PTD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +ADC_HandleTypeDef hadc1; + +I2C_HandleTypeDef hi2c1; + +IWDG_HandleTypeDef hiwdg; + +RTC_HandleTypeDef hrtc; + +SPI_HandleTypeDef hspi2; + +UART_HandleTypeDef huart1; +UART_HandleTypeDef huart2; + +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +void SystemClock_Config(void); +static void MX_GPIO_Init(void); +static void MX_USART1_UART_Init(void); +static void MX_SPI2_Init(void); +static void MX_I2C1_Init(void); +static void MX_ADC1_Init(void); +static void MX_USART2_UART_Init(void); +static void MX_IWDG_Init(void); +static void MX_RTC_Init(void); +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + /* USER CODE BEGIN 1 */ + + /* USER CODE END 1 */ + + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); + + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + MX_USART1_UART_Init(); + MX_SPI2_Init(); + MX_I2C1_Init(); + MX_ADC1_Init(); + MX_USART2_UART_Init(); + MX_IWDG_Init(); + MX_RTC_Init(); + /* USER CODE BEGIN 2 */ + + /* USER CODE END 2 */ + + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + /* USER CODE END WHILE */ + + /* USER CODE BEGIN 3 */ + } + /* USER CODE END 3 */ +} + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + + /**Configure the main internal regulator output voltage + */ + __HAL_RCC_PWR_CLK_ENABLE(); + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + /**Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.LSIState = RCC_LSI_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLM = 16; + RCC_OscInitStruct.PLL.PLLN = 192; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 4; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /**Initializes the CPU, AHB and APB busses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK) + { + Error_Handler(); + } + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } +} + +/** + * @brief ADC1 Initialization Function + * @param None + * @retval None + */ +static void MX_ADC1_Init(void) +{ + + /* USER CODE BEGIN ADC1_Init 0 */ + + /* USER CODE END ADC1_Init 0 */ + + ADC_ChannelConfTypeDef sConfig = {0}; + + /* USER CODE BEGIN ADC1_Init 1 */ + + /* USER CODE END ADC1_Init 1 */ + /**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion) + */ + hadc1.Instance = ADC1; + hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4; + hadc1.Init.Resolution = ADC_RESOLUTION_12B; + hadc1.Init.ScanConvMode = DISABLE; + hadc1.Init.ContinuousConvMode = DISABLE; + hadc1.Init.DiscontinuousConvMode = DISABLE; + hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE; + hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START; + hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT; + hadc1.Init.NbrOfConversion = 1; + hadc1.Init.DMAContinuousRequests = DISABLE; + hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV; + if (HAL_ADC_Init(&hadc1) != HAL_OK) + { + Error_Handler(); + } + /**Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time. + */ + sConfig.Channel = ADC_CHANNEL_9; + sConfig.Rank = 1; + sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES; + if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN ADC1_Init 2 */ + + /* USER CODE END ADC1_Init 2 */ + +} + +/** + * @brief I2C1 Initialization Function + * @param None + * @retval None + */ +static void MX_I2C1_Init(void) +{ + + /* USER CODE BEGIN I2C1_Init 0 */ + + /* USER CODE END I2C1_Init 0 */ + + /* USER CODE BEGIN I2C1_Init 1 */ + + /* USER CODE END I2C1_Init 1 */ + hi2c1.Instance = I2C1; + hi2c1.Init.ClockSpeed = 100000; + hi2c1.Init.DutyCycle = I2C_DUTYCYCLE_2; + hi2c1.Init.OwnAddress1 = 0; + hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; + hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; + hi2c1.Init.OwnAddress2 = 0; + hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE; + hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE; + if (HAL_I2C_Init(&hi2c1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN I2C1_Init 2 */ + + /* USER CODE END I2C1_Init 2 */ + +} + +/** + * @brief IWDG Initialization Function + * @param None + * @retval None + */ +static void MX_IWDG_Init(void) +{ + + /* USER CODE BEGIN IWDG_Init 0 */ + + /* USER CODE END IWDG_Init 0 */ + + /* USER CODE BEGIN IWDG_Init 1 */ + + /* USER CODE END IWDG_Init 1 */ + hiwdg.Instance = IWDG; + hiwdg.Init.Prescaler = IWDG_PRESCALER_4; + hiwdg.Init.Reload = 4095; + if (HAL_IWDG_Init(&hiwdg) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN IWDG_Init 2 */ + + /* USER CODE END IWDG_Init 2 */ + +} + +/** + * @brief RTC Initialization Function + * @param None + * @retval None + */ +static void MX_RTC_Init(void) +{ + + /* USER CODE BEGIN RTC_Init 0 */ + + /* USER CODE END RTC_Init 0 */ + + /* USER CODE BEGIN RTC_Init 1 */ + + /* USER CODE END RTC_Init 1 */ + /**Initialize RTC Only + */ + hrtc.Instance = RTC; + hrtc.Init.HourFormat = RTC_HOURFORMAT_24; + hrtc.Init.AsynchPrediv = 127; + hrtc.Init.SynchPrediv = 255; + hrtc.Init.OutPut = RTC_OUTPUT_DISABLE; + hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; + hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; + if (HAL_RTC_Init(&hrtc) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN RTC_Init 2 */ + + /* USER CODE END RTC_Init 2 */ + +} + +/** + * @brief SPI2 Initialization Function + * @param None + * @retval None + */ +static void MX_SPI2_Init(void) +{ + + /* USER CODE BEGIN SPI2_Init 0 */ + + /* USER CODE END SPI2_Init 0 */ + + /* USER CODE BEGIN SPI2_Init 1 */ + + /* USER CODE END SPI2_Init 1 */ + /* SPI2 parameter configuration*/ + hspi2.Instance = SPI2; + hspi2.Init.Mode = SPI_MODE_MASTER; + hspi2.Init.Direction = SPI_DIRECTION_2LINES; + hspi2.Init.DataSize = SPI_DATASIZE_8BIT; + hspi2.Init.CLKPolarity = SPI_POLARITY_LOW; + hspi2.Init.CLKPhase = SPI_PHASE_1EDGE; + hspi2.Init.NSS = SPI_NSS_SOFT; + hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; + hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB; + hspi2.Init.TIMode = SPI_TIMODE_DISABLE; + hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; + hspi2.Init.CRCPolynomial = 10; + if (HAL_SPI_Init(&hspi2) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN SPI2_Init 2 */ + + /* USER CODE END SPI2_Init 2 */ + +} + +/** + * @brief USART1 Initialization Function + * @param None + * @retval None + */ +static void MX_USART1_UART_Init(void) +{ + + /* USER CODE BEGIN USART1_Init 0 */ + + /* USER CODE END USART1_Init 0 */ + + /* USER CODE BEGIN USART1_Init 1 */ + + /* USER CODE END USART1_Init 1 */ + huart1.Instance = USART1; + huart1.Init.BaudRate = 115200; + huart1.Init.WordLength = UART_WORDLENGTH_8B; + huart1.Init.StopBits = UART_STOPBITS_1; + huart1.Init.Parity = UART_PARITY_NONE; + huart1.Init.Mode = UART_MODE_TX_RX; + huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart1.Init.OverSampling = UART_OVERSAMPLING_16; + if (HAL_UART_Init(&huart1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USART1_Init 2 */ + + /* USER CODE END USART1_Init 2 */ + +} + +/** + * @brief USART2 Initialization Function + * @param None + * @retval None + */ +static void MX_USART2_UART_Init(void) +{ + + /* USER CODE BEGIN USART2_Init 0 */ + + /* USER CODE END USART2_Init 0 */ + + /* USER CODE BEGIN USART2_Init 1 */ + + /* USER CODE END USART2_Init 1 */ + huart2.Instance = USART2; + huart2.Init.BaudRate = 115200; + huart2.Init.WordLength = UART_WORDLENGTH_8B; + huart2.Init.StopBits = UART_STOPBITS_1; + huart2.Init.Parity = UART_PARITY_NONE; + huart2.Init.Mode = UART_MODE_TX_RX; + huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart2.Init.OverSampling = UART_OVERSAMPLING_16; + if (HAL_UART_Init(&huart2) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USART2_Init 2 */ + + /* USER CODE END USART2_Init 2 */ + +} + +/** + * @brief GPIO Initialization Function + * @param None + * @retval None + */ +static void MX_GPIO_Init(void) +{ + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOH_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + +} + +/* USER CODE BEGIN 4 */ + +/* USER CODE END 4 */ + +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + + /* USER CODE END Error_Handler_Debug */ +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c new file mode 100644 index 0000000000..ac3d0bf3f5 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c @@ -0,0 +1,463 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * File Name : stm32f4xx_hal_msp.c + * Description : This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + ** This notice applies to any and all portions of this file + * that are not between comment pairs USER CODE BEGIN and + * USER CODE END. Other portions of this file, whether + * inserted by the user or by software development tools + * are owned by their respective copyright owners. + * + * COPYRIGHT(c) 2018 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +/** +* @brief ADC MSP Initialization +* This function configures the hardware resources used in this example +* @param hadc: ADC handle pointer +* @retval None +*/ +void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc) +{ + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(hadc->Instance==ADC1) + { + /* USER CODE BEGIN ADC1_MspInit 0 */ + + /* USER CODE END ADC1_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_ADC1_CLK_ENABLE(); + + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**ADC1 GPIO Configuration + PB1 ------> ADC1_IN9 + */ + GPIO_InitStruct.Pin = GPIO_PIN_1; + GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* USER CODE BEGIN ADC1_MspInit 1 */ + + /* USER CODE END ADC1_MspInit 1 */ + } + +} + +/** +* @brief ADC MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hadc: ADC handle pointer +* @retval None +*/ + +void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc) +{ + + if(hadc->Instance==ADC1) + { + /* USER CODE BEGIN ADC1_MspDeInit 0 */ + + /* USER CODE END ADC1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_ADC1_CLK_DISABLE(); + + /**ADC1 GPIO Configuration + PB1 ------> ADC1_IN9 + */ + HAL_GPIO_DeInit(GPIOB, GPIO_PIN_1); + + /* USER CODE BEGIN ADC1_MspDeInit 1 */ + + /* USER CODE END ADC1_MspDeInit 1 */ + } + +} + +/** +* @brief I2C MSP Initialization +* This function configures the hardware resources used in this example +* @param hi2c: I2C handle pointer +* @retval None +*/ +void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c) +{ + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(hi2c->Instance==I2C1) + { + /* USER CODE BEGIN I2C1_MspInit 0 */ + + /* USER CODE END I2C1_MspInit 0 */ + + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**I2C1 GPIO Configuration + PB6 ------> I2C1_SCL + PB7 ------> I2C1_SDA + */ + GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF4_I2C1; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* Peripheral clock enable */ + __HAL_RCC_I2C1_CLK_ENABLE(); + /* USER CODE BEGIN I2C1_MspInit 1 */ + + /* USER CODE END I2C1_MspInit 1 */ + } + +} + +/** +* @brief I2C MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hi2c: I2C handle pointer +* @retval None +*/ + +void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c) +{ + + if(hi2c->Instance==I2C1) + { + /* USER CODE BEGIN I2C1_MspDeInit 0 */ + + /* USER CODE END I2C1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_I2C1_CLK_DISABLE(); + + /**I2C1 GPIO Configuration + PB6 ------> I2C1_SCL + PB7 ------> I2C1_SDA + */ + HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_7); + + /* USER CODE BEGIN I2C1_MspDeInit 1 */ + + /* USER CODE END I2C1_MspDeInit 1 */ + } + +} + +/** +* @brief RTC MSP Initialization +* This function configures the hardware resources used in this example +* @param hrtc: RTC handle pointer +* @retval None +*/ +void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc) +{ + + if(hrtc->Instance==RTC) + { + /* USER CODE BEGIN RTC_MspInit 0 */ + + /* USER CODE END RTC_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_RTC_ENABLE(); + /* USER CODE BEGIN RTC_MspInit 1 */ + + /* USER CODE END RTC_MspInit 1 */ + } + +} + +/** +* @brief RTC MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hrtc: RTC handle pointer +* @retval None +*/ + +void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc) +{ + + if(hrtc->Instance==RTC) + { + /* USER CODE BEGIN RTC_MspDeInit 0 */ + + /* USER CODE END RTC_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_RTC_DISABLE(); + /* USER CODE BEGIN RTC_MspDeInit 1 */ + + /* USER CODE END RTC_MspDeInit 1 */ + } + +} + +/** +* @brief SPI MSP Initialization +* This function configures the hardware resources used in this example +* @param hspi: SPI handle pointer +* @retval None +*/ +void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi) +{ + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(hspi->Instance==SPI2) + { + /* USER CODE BEGIN SPI2_MspInit 0 */ + + /* USER CODE END SPI2_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_SPI2_CLK_ENABLE(); + + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**SPI2 GPIO Configuration + PB13 ------> SPI2_SCK + PB14 ------> SPI2_MISO + PB15 ------> SPI2_MOSI + */ + GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF5_SPI2; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* USER CODE BEGIN SPI2_MspInit 1 */ + + /* USER CODE END SPI2_MspInit 1 */ + } + +} + +/** +* @brief SPI MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hspi: SPI handle pointer +* @retval None +*/ + +void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi) +{ + + if(hspi->Instance==SPI2) + { + /* USER CODE BEGIN SPI2_MspDeInit 0 */ + + /* USER CODE END SPI2_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_SPI2_CLK_DISABLE(); + + /**SPI2 GPIO Configuration + PB13 ------> SPI2_SCK + PB14 ------> SPI2_MISO + PB15 ------> SPI2_MOSI + */ + HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15); + + /* USER CODE BEGIN SPI2_MspDeInit 1 */ + + /* USER CODE END SPI2_MspDeInit 1 */ + } + +} + +/** +* @brief UART MSP Initialization +* This function configures the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspInit 0 */ + + /* USER CODE END USART1_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USART1_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**USART1 GPIO Configuration + PA9 ------> USART1_TX + PA10 ------> USART1_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF7_USART1; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN USART1_MspInit 1 */ + + /* USER CODE END USART1_MspInit 1 */ + } + else if(huart->Instance==USART2) + { + /* USER CODE BEGIN USART2_MspInit 0 */ + + /* USER CODE END USART2_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USART2_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF7_USART2; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN USART2_MspInit 1 */ + + /* USER CODE END USART2_MspInit 1 */ + } + +} + +/** +* @brief UART MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ + +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + + if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspDeInit 0 */ + + /* USER CODE END USART1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART1_CLK_DISABLE(); + + /**USART1 GPIO Configuration + PA9 ------> USART1_TX + PA10 ------> USART1_RX + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10); + + /* USER CODE BEGIN USART1_MspDeInit 1 */ + + /* USER CODE END USART1_MspDeInit 1 */ + } + else if(huart->Instance==USART2) + { + /* USER CODE BEGIN USART2_MspDeInit 0 */ + + /* USER CODE END USART2_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART2_CLK_DISABLE(); + + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3); + + /* USER CODE BEGIN USART2_MspDeInit 1 */ + + /* USER CODE END USART2_MspDeInit 1 */ + } + +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src/stm32f4xx_it.c b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src/stm32f4xx_it.c new file mode 100644 index 0000000000..5973f7fddb --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src/stm32f4xx_it.c @@ -0,0 +1,217 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32f4xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * + * COPYRIGHT(c) 2018 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32f4xx_it.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex-M4 Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Memory management fault. + */ +void MemManage_Handler(void) +{ + /* USER CODE BEGIN MemoryManagement_IRQn 0 */ + + /* USER CODE END MemoryManagement_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ + /* USER CODE END W1_MemoryManagement_IRQn 0 */ + } +} + +/** + * @brief This function handles Pre-fetch fault, memory access fault. + */ +void BusFault_Handler(void) +{ + /* USER CODE BEGIN BusFault_IRQn 0 */ + + /* USER CODE END BusFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_BusFault_IRQn 0 */ + /* USER CODE END W1_BusFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Undefined instruction or illegal state. + */ +void UsageFault_Handler(void) +{ + /* USER CODE BEGIN UsageFault_IRQn 0 */ + + /* USER CODE END UsageFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ + /* USER CODE END W1_UsageFault_IRQn 0 */ + } +} + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + /* USER CODE BEGIN SVCall_IRQn 0 */ + + /* USER CODE END SVCall_IRQn 0 */ + /* USER CODE BEGIN SVCall_IRQn 1 */ + + /* USER CODE END SVCall_IRQn 1 */ +} + +/** + * @brief This function handles Debug monitor. + */ +void DebugMon_Handler(void) +{ + /* USER CODE BEGIN DebugMonitor_IRQn 0 */ + + /* USER CODE END DebugMonitor_IRQn 0 */ + /* USER CODE BEGIN DebugMonitor_IRQn 1 */ + + /* USER CODE END DebugMonitor_IRQn 1 */ +} + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + /* USER CODE BEGIN PendSV_IRQn 0 */ + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32F4xx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32f4xx.s). */ +/******************************************************************************/ + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src/system_stm32f4xx.c b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src/system_stm32f4xx.c new file mode 100644 index 0000000000..3303f969d9 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src/system_stm32f4xx.c @@ -0,0 +1,761 @@ +/** + ****************************************************************************** + * @file system_stm32f4xx.c + * @author MCD Application Team + * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File. + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f4xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2017 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f4xx_system + * @{ + */ + +/** @addtogroup STM32F4xx_System_Private_Includes + * @{ + */ + + +#include "stm32f4xx.h" + +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */ +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\ + || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) +/* #define DATA_IN_ExtSRAM */ +#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\ + STM32F412Zx || STM32F412Vx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) +/* #define DATA_IN_ExtSDRAM */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\ + STM32F479xx */ + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/******************************************************************************/ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +uint32_t SystemCoreClock = 16000000; +const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; +const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4}; +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes + * @{ + */ + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the FPU setting, vector table location and External memory + * configuration. + * @param None + * @retval None + */ +void SystemInit(void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ + #endif + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000; + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x24003010; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Disable all interrupts */ + RCC->CIR = 0x00000000; + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + SystemInit_ExtMemCtl(); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value + * depends on the application requirements), user has to ensure that HSE_VALUE + * is same as the real frequency of the crystal used. Otherwise, this function + * may have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N + SYSCLK = PLL_VCO / PLL_P + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; + pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; + + if (pllsource != 0) + { + /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + else + { + /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + + pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2; + SystemCoreClock = pllvco/pllp; + break; + default: + SystemCoreClock = HSI_VALUE; + break; + } + /* Compute HCLK frequency --------------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK frequency */ + SystemCoreClock >>= tmp; +} + +#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM) +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F469xx) || defined(STM32F479xx) +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f4xx.s before jump to main. + * This function configures the external memories (SRAM/SDRAM) + * This SRAM/SDRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ + __IO uint32_t tmp = 0x00; + + register uint32_t tmpreg = 0, timeout = 0xFFFF; + register __IO uint32_t index; + + /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */ + RCC->AHB1ENR |= 0x000001F8; + + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN); + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x00CCC0CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAA0A8A; + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xFFFF0FCF; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00CC0CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA828A; + /* Configure PEx pins speed to 100 MHz */ + GPIOE->OSPEEDR = 0xFFFFC3CF; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0xCCCCCCCC; + GPIOF->AFR[1] = 0xCCCCCCCC; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA800AAA; + /* Configure PFx pins speed to 50 MHz */ + GPIOF->OSPEEDR = 0xAA800AAA; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0xCCCCCCCC; + GPIOG->AFR[1] = 0xCCCCCCCC; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0xAAAAAAAA; + /* Configure PGx pins speed to 50 MHz */ + GPIOG->OSPEEDR = 0xAAAAAAAA; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + + /* Connect PHx pins to FMC Alternate function */ + GPIOH->AFR[0] = 0x00C0CC00; + GPIOH->AFR[1] = 0xCCCCCCCC; + /* Configure PHx pins in Alternate function mode */ + GPIOH->MODER = 0xAAAA08A0; + /* Configure PHx pins speed to 50 MHz */ + GPIOH->OSPEEDR = 0xAAAA08A0; + /* Configure PHx pins Output type to push-pull */ + GPIOH->OTYPER = 0x00000000; + /* No pull-up, pull-down for PHx pins */ + GPIOH->PUPDR = 0x00000000; + + /* Connect PIx pins to FMC Alternate function */ + GPIOI->AFR[0] = 0xCCCCCCCC; + GPIOI->AFR[1] = 0x00000CC0; + /* Configure PIx pins in Alternate function mode */ + GPIOI->MODER = 0x0028AAAA; + /* Configure PIx pins speed to 50 MHz */ + GPIOI->OSPEEDR = 0x0028AAAA; + /* Configure PIx pins Output type to push-pull */ + GPIOI->OTYPER = 0x00000000; + /* No pull-up, pull-down for PIx pins */ + GPIOI->PUPDR = 0x00000000; + +/*-- FMC Configuration -------------------------------------------------------*/ + /* Enable the FMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + + FMC_Bank5_6->SDCR[0] = 0x000019E4; + FMC_Bank5_6->SDTR[0] = 0x01115351; + + /* SDRAM initialization sequence */ + /* Clock enable command */ + FMC_Bank5_6->SDCMR = 0x00000011; + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Delay */ + for (index = 0; index<1000; index++); + + /* PALL command */ + FMC_Bank5_6->SDCMR = 0x00000012; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Auto refresh command */ + FMC_Bank5_6->SDCMR = 0x00000073; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* MRD register program */ + FMC_Bank5_6->SDCMR = 0x00046014; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Set refresh count */ + tmpreg = FMC_Bank5_6->SDRTR; + FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1)); + + /* Disable write protection */ + tmpreg = FMC_Bank5_6->SDCR[0]; + FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF); + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001011; + FMC_Bank1->BTCR[3] = 0x00000201; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ +#if defined(STM32F469xx) || defined(STM32F479xx) + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001091; + FMC_Bank1->BTCR[3] = 0x00110212; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F469xx || STM32F479xx */ + + (void)(tmp); +} +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ +#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f4xx.s before jump to main. + * This function configures the external memories (SRAM/SDRAM) + * This SRAM/SDRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ + __IO uint32_t tmp = 0x00; +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) +#if defined (DATA_IN_ExtSDRAM) + register uint32_t tmpreg = 0, timeout = 0xFFFF; + register __IO uint32_t index; + +#if defined(STM32F446xx) + /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface + clock */ + RCC->AHB1ENR |= 0x0000007D; +#else + /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface + clock */ + RCC->AHB1ENR |= 0x000001F8; +#endif /* STM32F446xx */ + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN); + +#if defined(STM32F446xx) + /* Connect PAx pins to FMC Alternate function */ + GPIOA->AFR[0] |= 0xC0000000; + GPIOA->AFR[1] |= 0x00000000; + /* Configure PDx pins in Alternate function mode */ + GPIOA->MODER |= 0x00008000; + /* Configure PDx pins speed to 50 MHz */ + GPIOA->OSPEEDR |= 0x00008000; + /* Configure PDx pins Output type to push-pull */ + GPIOA->OTYPER |= 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOA->PUPDR |= 0x00000000; + + /* Connect PCx pins to FMC Alternate function */ + GPIOC->AFR[0] |= 0x00CC0000; + GPIOC->AFR[1] |= 0x00000000; + /* Configure PDx pins in Alternate function mode */ + GPIOC->MODER |= 0x00000A00; + /* Configure PDx pins speed to 50 MHz */ + GPIOC->OSPEEDR |= 0x00000A00; + /* Configure PDx pins Output type to push-pull */ + GPIOC->OTYPER |= 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOC->PUPDR |= 0x00000000; +#endif /* STM32F446xx */ + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x000000CC; + GPIOD->AFR[1] = 0xCC000CCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xA02A000A; + /* Configure PDx pins speed to 50 MHz */ + GPIOD->OSPEEDR = 0xA02A000A; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00000CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA800A; + /* Configure PEx pins speed to 50 MHz */ + GPIOE->OSPEEDR = 0xAAAA800A; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0xCCCCCCCC; + GPIOF->AFR[1] = 0xCCCCCCCC; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA800AAA; + /* Configure PFx pins speed to 50 MHz */ + GPIOF->OSPEEDR = 0xAA800AAA; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0xCCCCCCCC; + GPIOG->AFR[1] = 0xCCCCCCCC; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0xAAAAAAAA; + /* Configure PGx pins speed to 50 MHz */ + GPIOG->OSPEEDR = 0xAAAAAAAA; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F469xx) || defined(STM32F479xx) + /* Connect PHx pins to FMC Alternate function */ + GPIOH->AFR[0] = 0x00C0CC00; + GPIOH->AFR[1] = 0xCCCCCCCC; + /* Configure PHx pins in Alternate function mode */ + GPIOH->MODER = 0xAAAA08A0; + /* Configure PHx pins speed to 50 MHz */ + GPIOH->OSPEEDR = 0xAAAA08A0; + /* Configure PHx pins Output type to push-pull */ + GPIOH->OTYPER = 0x00000000; + /* No pull-up, pull-down for PHx pins */ + GPIOH->PUPDR = 0x00000000; + + /* Connect PIx pins to FMC Alternate function */ + GPIOI->AFR[0] = 0xCCCCCCCC; + GPIOI->AFR[1] = 0x00000CC0; + /* Configure PIx pins in Alternate function mode */ + GPIOI->MODER = 0x0028AAAA; + /* Configure PIx pins speed to 50 MHz */ + GPIOI->OSPEEDR = 0x0028AAAA; + /* Configure PIx pins Output type to push-pull */ + GPIOI->OTYPER = 0x00000000; + /* No pull-up, pull-down for PIx pins */ + GPIOI->PUPDR = 0x00000000; +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +/*-- FMC Configuration -------------------------------------------------------*/ + /* Enable the FMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + + /* Configure and enable SDRAM bank1 */ +#if defined(STM32F446xx) + FMC_Bank5_6->SDCR[0] = 0x00001954; +#else + FMC_Bank5_6->SDCR[0] = 0x000019E4; +#endif /* STM32F446xx */ + FMC_Bank5_6->SDTR[0] = 0x01115351; + + /* SDRAM initialization sequence */ + /* Clock enable command */ + FMC_Bank5_6->SDCMR = 0x00000011; + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Delay */ + for (index = 0; index<1000; index++); + + /* PALL command */ + FMC_Bank5_6->SDCMR = 0x00000012; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Auto refresh command */ +#if defined(STM32F446xx) + FMC_Bank5_6->SDCMR = 0x000000F3; +#else + FMC_Bank5_6->SDCMR = 0x00000073; +#endif /* STM32F446xx */ + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* MRD register program */ +#if defined(STM32F446xx) + FMC_Bank5_6->SDCMR = 0x00044014; +#else + FMC_Bank5_6->SDCMR = 0x00046014; +#endif /* STM32F446xx */ + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Set refresh count */ + tmpreg = FMC_Bank5_6->SDRTR; +#if defined(STM32F446xx) + FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1)); +#else + FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1)); +#endif /* STM32F446xx */ + + /* Disable write protection */ + tmpreg = FMC_Bank5_6->SDCR[0]; + FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF); +#endif /* DATA_IN_ExtSDRAM */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\ + || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) + +#if defined(DATA_IN_ExtSRAM) +/*-- GPIOs Configuration -----------------------------------------------------*/ + /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ + RCC->AHB1ENR |= 0x00000078; + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN); + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x00CCC0CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAA0A8A; + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xFFFF0FCF; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00CC0CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA828A; + /* Configure PEx pins speed to 100 MHz */ + GPIOE->OSPEEDR = 0xFFFFC3CF; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCC0000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA000AAA; + /* Configure PFx pins speed to 100 MHz */ + GPIOF->OSPEEDR = 0xFF000FFF; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0x00CCCCCC; + GPIOG->AFR[1] = 0x000000C0; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0x00085AAA; + /* Configure PGx pins speed to 100 MHz */ + GPIOG->OSPEEDR = 0x000CAFFF; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + +/*-- FMC/FSMC Configuration --------------------------------------------------*/ + /* Enable the FMC/FSMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001011; + FMC_Bank1->BTCR[3] = 0x00000201; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ +#if defined(STM32F469xx) || defined(STM32F479xx) + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001091; + FMC_Bank1->BTCR[3] = 0x00110212; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F469xx || STM32F479xx */ +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\ + || defined(STM32F412Zx) || defined(STM32F412Vx) + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN); + /* Configure and enable Bank1_SRAM2 */ + FSMC_Bank1->BTCR[2] = 0x00001011; + FSMC_Bank1->BTCR[3] = 0x00000201; + FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF; +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */ + +#endif /* DATA_IN_ExtSRAM */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\ + STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx */ + (void)(tmp); +} +#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f411-atk-nano/board/Kconfig b/bsp/stm32/stm32f411-atk-nano/board/Kconfig new file mode 100644 index 0000000000..e6418e12bd --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/Kconfig @@ -0,0 +1,171 @@ +menu "Hardware Drivers Config" + +config SOC_STM32F411RC + bool + select SOC_SERIES_STM32F4 + select RT_USING_COMPONENTS_INIT + select RT_USING_USER_MAIN + default y + +menu "Onboard Peripheral Drivers" + + config BSP_USING_USB_TO_USART + bool "Enable USB TO USART (uart1)" + select BSP_USING_UART + select BSP_USING_UART1 + default y + + config BSP_USING_EEPROM + bool "Enable I2C EEPROM (i2c1)" + select BSP_USING_I2C1 + default n + + config BSP_USING_SPI_FLASH + bool "Enable SPI FLASH (W25Q16 spi2)" + select BSP_USING_SPI + select BSP_USING_SPI2 + select RT_USING_SFUD + select RT_SFUD_USING_SFDP + default n + + config BSP_USING_POT + bool "Enable potentiometer" + select BSP_USING_ADC + select BSP_USING_ADC1 + default n + +endmenu + +menu "On-chip Peripheral Drivers" + + config BSP_USING_GPIO + bool "Enable GPIO" + select RT_USING_PIN + default y + + menuconfig BSP_USING_UART + bool "Enable UART" + default y + select RT_USING_SERIAL + if BSP_USING_UART + config BSP_USING_UART1 + bool "Enable UART1" + default y + + config BSP_UART1_RX_USING_DMA + bool "Enable UART1 RX DMA" + depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA + default n + + config BSP_USING_UART2 + bool "Enable UART2" + default n + + config BSP_UART2_RX_USING_DMA + bool "Enable UART2 RX DMA" + depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA + default n + endif + + menuconfig BSP_USING_TIM + bool "Enable timer" + default n + select RT_USING_HWTIMER + if BSP_USING_TIM + config BSP_USING_TIM2 + bool "Enable TIM2" + default n + + config BSP_USING_TIM3 + bool "Enable TIM3" + default n + + config BSP_USING_TIM4 + bool "Enable TIM4" + default n + endif + + menuconfig BSP_USING_SPI + bool "Enable SPI BUS" + default n + select RT_USING_SPI + if BSP_USING_SPI + config BSP_USING_SPI2 + bool "Enable SPI2 BUS" + default n + + config BSP_SPI2_TX_USING_DMA + bool "Enable SPI2 TX DMA" + depends on BSP_USING_SPI2 + default n + + config BSP_SPI2_RX_USING_DMA + bool "Enable SPI2 RX DMA" + depends on BSP_USING_SPI2 + select BSP_SPI2_TX_USING_DMA + default n + endif + + menuconfig BSP_USING_I2C1 + bool "Enable I2C1 BUS (software simulation)" + default n + select RT_USING_I2C + select RT_USING_I2C_BITOPS + select RT_USING_PIN + if BSP_USING_I2C1 + config BSP_I2C1_SCL_PIN + int "i2c1 scl pin number" + range 0 63 + default 22 + config BSP_I2C1_SDA_PIN + int "I2C1 sda pin number" + range 0 63 + default 23 + endif + + menuconfig BSP_USING_ADC + bool "Enable ADC" + default n + select RT_USING_ADC + if BSP_USING_ADC + config BSP_USING_ADC1 + bool "Enable ADC1" + default n + endif + + config BSP_USING_ON_CHIP_FLASH + bool "Enable on-chip FLASH" + default n + + menuconfig BSP_USING_ONCHIP_RTC + bool "Enable RTC" + select RT_USING_RTC + select RT_USING_LIBC + default n + if BSP_USING_ONCHIP_RTC + choice + prompt "Select clock source" + default BSP_RTC_USING_LSE + + config BSP_RTC_USING_LSE + bool "RTC USING LSE" + + config BSP_RTC_USING_LSI + bool "RTC USING LSI" + endchoice + endif + + config BSP_USING_WDT + bool "Enable Watchdog Timer" + select RT_USING_WDT + default n + + source "../libraries/HAL_Drivers/Kconfig" + +endmenu + +menu "Board extended module Drivers" + +endmenu + +endmenu diff --git a/bsp/stm32/stm32f411-atk-nano/board/SConscript b/bsp/stm32/stm32f411-atk-nano/board/SConscript new file mode 100644 index 0000000000..2993a9fb6f --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/SConscript @@ -0,0 +1,41 @@ +import os +import rtconfig +from building import * + +Import('SDK_LIB') + +cwd = GetCurrentDir() + +# add general drivers +src = Split(''' +board.c +CubeMX_Config/Src/stm32f4xx_hal_msp.c +''') + +if GetDepend(['BSP_USING_SPI_FLASH']): + src += Glob('ports/spi_flash_init.c') + +path = [cwd] +path += [cwd + '/CubeMX_Config/Inc'] +path += [cwd + '/ports'] + +startup_path_prefix = SDK_LIB + +if rtconfig.CROSS_TOOL == 'gcc': + src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/startup_stm32f411xe.s'] +elif rtconfig.CROSS_TOOL == 'keil': + src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/arm/startup_stm32f411xe.s'] +elif rtconfig.CROSS_TOOL == 'iar': + src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/iar/startup_stm32f411xe.s'] + +# STM32F405xx) || STM32F415xx) || STM32F407xx) || STM32F417xx) +# STM32F427xx) || STM32F437xx) || STM32F429xx) || STM32F439xx) +# STM32F401xC) || STM32F401xE) || STM32F410Tx) || STM32F410Cx) +# STM32F410Rx) || STM32F411xE) || STM32F446xx) || STM32F469xx) +# STM32F479xx) || STM32F412Cx) || STM32F412Rx) || STM32F412Vx) +# STM32F412Zx) || STM32F413xx) || STM32F423xx) +# You can select chips from the list above +CPPDEFINES = ['STM32F411xE'] +group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES) + +Return('group') diff --git a/bsp/stm32/stm32f411-atk-nano/board/board.c b/bsp/stm32/stm32f411-atk-nano/board/board.c new file mode 100644 index 0000000000..2ca06e13bf --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/board.c @@ -0,0 +1,50 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-11-06 SummerGift first version + */ + +#include "board.h" + +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + + /**Configure the main internal regulator output voltage + */ + __HAL_RCC_PWR_CLK_ENABLE(); + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + /**Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLM = 16; + RCC_OscInitStruct.PLL.PLLN = 192; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 4; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /**Initializes the CPU, AHB and APB busses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK) + { + Error_Handler(); + } +} diff --git a/bsp/stm32/stm32f411-atk-nano/board/board.h b/bsp/stm32/stm32f411-atk-nano/board/board.h new file mode 100644 index 0000000000..452aa7420c --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/board.h @@ -0,0 +1,50 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-11-5 SummerGift first version + */ + +#ifndef __BOARD_H__ +#define __BOARD_H__ + +#include +#include +#include "drv_common.h" +#include "drv_gpio.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define STM32_FLASH_START_ADRESS ((uint32_t)0x08000000) +#define STM32_FLASH_SIZE (256 * 1024) +#define STM32_FLASH_END_ADDRESS ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE)) + +#define STM32_SRAM_SIZE 128 +#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024) + +#if defined(__CC_ARM) || defined(__CLANG_ARM) +extern int Image$$RW_IRAM1$$ZI$$Limit; +#define HEAP_BEGIN (&Image$$RW_IRAM1$$ZI$$Limit) +#elif __ICCARM__ +#pragma section="CSTACK" +#define HEAP_BEGIN (__segment_end("CSTACK")) +#else +extern int __bss_end; +#define HEAP_BEGIN (&__bss_end) +#endif + +#define HEAP_END STM32_SRAM_END + +void SystemClock_Config(void); + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/bsp/stm32/stm32f411-atk-nano/board/linker_scripts/link.icf b/bsp/stm32/stm32f411-atk-nano/board/linker_scripts/link.icf new file mode 100644 index 0000000000..9d46a5bd77 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/linker_scripts/link.icf @@ -0,0 +1,28 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0803FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x0400; +define symbol __ICFEDIT_size_heap__ = 0x0000; +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, last block CSTACK}; diff --git a/bsp/stm32/stm32f411-atk-nano/board/linker_scripts/link.lds b/bsp/stm32/stm32f411-atk-nano/board/linker_scripts/link.lds new file mode 100644 index 0000000000..a2dc692d06 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/linker_scripts/link.lds @@ -0,0 +1,157 @@ +/* + * linker script for STM32F4xx with GNU ld + * bernard.xiong 2009-10-14 + */ + +/* Program Entry, set to mark it as "used" and avoid gc */ +MEMORY +{ + ROM (rx) : ORIGIN = 0x08000000, LENGTH = 256k /* 256KB flash */ + RAM (rw) : ORIGIN = 0x20000000, LENGTH = 128k /* 128K sram */ +} +ENTRY(Reset_Handler) +_system_stack_size = 0x200; + +SECTIONS +{ + .text : + { + . = ALIGN(4); + _stext = .; + KEEP(*(.isr_vector)) /* Startup code */ + + . = ALIGN(4); + *(.text) /* remaining code */ + *(.text.*) /* remaining code */ + *(.rodata) /* read-only data (constants) */ + *(.rodata*) + *(.glue_7) + *(.glue_7t) + *(.gnu.linkonce.t*) + + /* section information for finsh shell */ + . = ALIGN(4); + __fsymtab_start = .; + KEEP(*(FSymTab)) + __fsymtab_end = .; + + . = ALIGN(4); + __vsymtab_start = .; + KEEP(*(VSymTab)) + __vsymtab_end = .; + + /* section information for initial. */ + . = ALIGN(4); + __rt_init_start = .; + KEEP(*(SORT(.rti_fn*))) + __rt_init_end = .; + + . = ALIGN(4); + + PROVIDE(__ctors_start__ = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + PROVIDE(__ctors_end__ = .); + + . = ALIGN(4); + + _etext = .; + } > ROM = 0 + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + + /* This is used by the startup in order to initialize the .data secion */ + _sidata = .; + } > ROM + __exidx_end = .; + + /* .data section which is used for initialized data */ + + .data : AT (_sidata) + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _sdata = . ; + + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + + PROVIDE(__dtors_start__ = .); + KEEP(*(SORT(.dtors.*))) + KEEP(*(.dtors)) + PROVIDE(__dtors_end__ = .); + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _edata = . ; + } >RAM + + .stack : + { + . = ALIGN(4); + _sstack = .; + . = . + _system_stack_size; + . = ALIGN(4); + _estack = .; + } >RAM + + __bss_start = .; + .bss : + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; + + *(.bss) + *(.bss.*) + *(COMMON) + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _ebss = . ; + + *(.bss.init) + } > RAM + __bss_end = .; + + _end = .; + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + * Symbols in the DWARF debugging sections are relative to the beginning + * of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +} diff --git a/bsp/stm32/stm32f411-atk-nano/board/linker_scripts/link.sct b/bsp/stm32/stm32f411-atk-nano/board/linker_scripts/link.sct new file mode 100644 index 0000000000..f314c4bd58 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/linker_scripts/link.sct @@ -0,0 +1,15 @@ +; ************************************************************* +; *** Scatter-Loading Description File generated by uVision *** +; ************************************************************* + +LR_IROM1 0x08000000 0x00040000 { ; load region size_region + ER_IROM1 0x08000000 0x00040000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + RW_IRAM1 0x20000000 0x00020000 { ; RW data + .ANY (+RW +ZI) + } +} + diff --git a/bsp/stm32/stm32f411-atk-nano/board/ports/spi_flash_init.c b/bsp/stm32/stm32f411-atk-nano/board/ports/spi_flash_init.c new file mode 100644 index 0000000000..43f726525b --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/board/ports/spi_flash_init.c @@ -0,0 +1,31 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-11-27 SummerGift add spi flash port file + */ + +#include +#include "spi_flash.h" +#include "spi_flash_sfud.h" +#include "drv_spi.h" + +#if defined(BSP_USING_SPI_FLASH) +static int rt_hw_spi_flash_init(void) +{ + __HAL_RCC_GPIOB_CLK_ENABLE(); + rt_hw_spi_device_attach("spi2", "spi20", GPIOB, GPIO_PIN_12); + + if (RT_NULL == rt_sfud_flash_probe("W25Q16", "spi20")) + { + return -RT_ERROR; + }; + + return RT_EOK; +} +INIT_COMPONENT_EXPORT(rt_hw_spi_flash_init); +#endif + diff --git a/bsp/stm32/stm32f411-atk-nano/figures/board.png b/bsp/stm32/stm32f411-atk-nano/figures/board.png new file mode 100644 index 0000000000..09fa834b96 Binary files /dev/null and b/bsp/stm32/stm32f411-atk-nano/figures/board.png differ diff --git a/bsp/stm32/stm32f411-atk-nano/project.ewd b/bsp/stm32/stm32f411-atk-nano/project.ewd new file mode 100644 index 0000000000..e94c83ed06 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/project.ewd @@ -0,0 +1,2834 @@ + + + 3 + + rt-thread + + ARM + + 1 + + C-SPY + 2 + + 29 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 1 + + + + + + + + CADI_ID + 2 + + 0 + 1 + 1 + + + + + + + + + CMSISDAP_ID + 2 + + 4 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + IJET_ID + 2 + + 8 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + JLINK_ID + 2 + + 16 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + PEMICRO_ID + 2 + + 3 + 1 + 1 + + + + + + + + STLINK_ID + 2 + + 4 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 1 + + + + + + + + TIFET_ID + 2 + + 1 + 1 + 1 + + + + + + + + + + + + + + + + + + + XDS100_ID + 2 + + 6 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\IARProbe\IarProbePlugin.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin + 0 + + + + + Release + + ARM + + 0 + + C-SPY + 2 + + 29 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 0 + + + + + + + + CADI_ID + 2 + + 0 + 1 + 0 + + + + + + + + + CMSISDAP_ID + 2 + + 4 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 0 + + + + + + + + + + + IJET_ID + 2 + + 8 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + JLINK_ID + 2 + + 16 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 2 + 1 + 0 + + + + + + + + + + PEMICRO_ID + 2 + + 3 + 1 + 0 + + + + + + + + STLINK_ID + 2 + + 4 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 0 + + + + + + + + TIFET_ID + 2 + + 1 + 1 + 0 + + + + + + + + + + + + + + + + + + + XDS100_ID + 2 + + 6 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\IARProbe\IarProbePlugin.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin + 0 + + + + diff --git a/bsp/stm32/stm32f411-atk-nano/project.ewp b/bsp/stm32/stm32f411-atk-nano/project.ewp new file mode 100644 index 0000000000..eb736f7ff9 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/project.ewp @@ -0,0 +1,2256 @@ + + 3 + + rt-thread + + ARM + + 1 + + General + 3 + + 29 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 34 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 20 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + Release + + ARM + + 0 + + General + 3 + + 29 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 34 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 0 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 20 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 0 + + + + + + + BILINK + 0 + + + + + Kernel + + $PROJ_DIR$\..\..\..\src\clock.c + + + $PROJ_DIR$\..\..\..\src\components.c + + + $PROJ_DIR$\..\..\..\src\device.c + + + $PROJ_DIR$\..\..\..\src\idle.c + + + $PROJ_DIR$\..\..\..\src\ipc.c + + + $PROJ_DIR$\..\..\..\src\irq.c + + + $PROJ_DIR$\..\..\..\src\kservice.c + + + $PROJ_DIR$\..\..\..\src\mem.c + + + $PROJ_DIR$\..\..\..\src\mempool.c + + + $PROJ_DIR$\..\..\..\src\object.c + + + $PROJ_DIR$\..\..\..\src\scheduler.c + + + $PROJ_DIR$\..\..\..\src\signal.c + + + $PROJ_DIR$\..\..\..\src\thread.c + + + $PROJ_DIR$\..\..\..\src\timer.c + + + + Applications + + $PROJ_DIR$\applications\main.c + + + + Drivers + + $PROJ_DIR$\board\board.c + + + $PROJ_DIR$\board\CubeMX_Config\Src\stm32f4xx_hal_msp.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\iar\startup_stm32f411xe.s + + + $PROJ_DIR$\..\libraries\HAL_Drivers\drv_gpio.c + + + $PROJ_DIR$\..\libraries\HAL_Drivers\drv_usart.c + + + $PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c + + + + cpu + + $PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\cpuport.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\context_iar.S + + + + DeviceDrivers + + $PROJ_DIR$\..\..\..\components\drivers\misc\pin.c + + + $PROJ_DIR$\..\..\..\components\drivers\serial\serial.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\completion.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\dataqueue.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\pipe.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\ringblk_buf.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\ringbuffer.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\waitqueue.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c + + + + finsh + + $PROJ_DIR$\..\..\..\components\finsh\shell.c + + + $PROJ_DIR$\..\..\..\components\finsh\cmd.c + + + $PROJ_DIR$\..\..\..\components\finsh\msh.c + + + + libc + + $PROJ_DIR$\..\..\..\components\libc\compilers\common\time.c + + + + STM32_HAL + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c + + + diff --git a/bsp/stm32/stm32f411-atk-nano/project.eww b/bsp/stm32/stm32f411-atk-nano/project.eww new file mode 100644 index 0000000000..c2cb02eb1e --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/project.eww @@ -0,0 +1,10 @@ + + + + + $WS_DIR$\project.ewp + + + + + diff --git a/bsp/stm32/stm32f411-atk-nano/project.uvopt b/bsp/stm32/stm32f411-atk-nano/project.uvopt new file mode 100644 index 0000000000..b53d69d5df --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/project.uvopt @@ -0,0 +1,162 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + + + + 0 + 0 + + + + rt-thread + 0x4 + ARM-ADS + + 25000000 + + 1 + 1 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\keil\List\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 0 + 0 + 1 + + 255 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 0 + 1 + 1 + 0 + 0 + 0 + 6 + + + + + + + + + + + Segger\JL2CM3.dll + + + + 0 + JL2CM3 + -U30000299 -O207 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000 + + + 0 + UL2CM3 + UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + diff --git a/bsp/stm32/stm32f411-atk-nano/project.uvoptx b/bsp/stm32/stm32f411-atk-nano/project.uvoptx new file mode 100644 index 0000000000..f6af53c4a0 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/project.uvoptx @@ -0,0 +1,189 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + rt-thread + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\keil\List\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 0 + 0 + 1 + + 18 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 5 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + ST-LINKIII-KEIL_SWO + -U-O206 -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_256.FLM -FS08000000 -FL040000 -FP0($$Device:STM32F411RCTx$CMSIS\Flash\STM32F4xx_256.FLM) + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32F4xx_256 -FL040000 -FS08000000 -FP0($$Device:STM32F411RCTx$CMSIS\Flash\STM32F4xx_256.FLM) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + 1 + 0 + 2 + 10000000 + + + + + + Source Group 1 + 0 + 0 + 0 + 0 + + + diff --git a/bsp/stm32/stm32f411-atk-nano/project.uvprojx b/bsp/stm32/stm32f411-atk-nano/project.uvprojx new file mode 100644 index 0000000000..7e1140e589 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/project.uvprojx @@ -0,0 +1,869 @@ + + + 2.1 +
### uVision Project, (C) Keil Software
+ + + rt-thread + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::ARMCC + 0 + + + STM32F411RCTx + STMicroelectronics + Keil.STM32F4xx_DFP.2.14.0 + http://www.keil.com/pack/ + IRAM(0x20000000,0x00020000) IROM(0x08000000,0x00040000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_256 -FS08000000 -FL040000 -FP0($$Device:STM32F411RCTx$CMSIS\Flash\STM32F4xx_256.FLM)) + 0 + $$Device:STM32F411RCTx$Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h + + + + + + + + + + $$Device:STM32F411RCTx$CMSIS\SVD\STM32F411xx.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\keil\Obj\ + rt-thread + 1 + 0 + 0 + 1 + 0 + .\build\keil\List\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin !L --output rtthread.bin + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + "" () + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 2 + 0 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x20000 + + + 1 + 0x8000000 + 0x40000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x40000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x20000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + 0 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + USE_HAL_DRIVER, STM32F411xE + + .;..\..\..\include;applications;.;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\spi;..\..\..\components\drivers\include;..\..\..\components\drivers\spi\sfud\inc;..\..\..\components\drivers\include;..\..\..\components\finsh;..\..\..\components\libc\compilers\common;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\libraries\STM32F4xx_HAL\CMSIS\Include + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + .\board\linker_scripts\link.sct + + + + + + + + + + + Kernel + + + clock.c + 1 + ..\..\..\src\clock.c + + + + + components.c + 1 + ..\..\..\src\components.c + + + + + device.c + 1 + ..\..\..\src\device.c + + + + + idle.c + 1 + ..\..\..\src\idle.c + + + + + ipc.c + 1 + ..\..\..\src\ipc.c + + + + + irq.c + 1 + ..\..\..\src\irq.c + + + + + kservice.c + 1 + ..\..\..\src\kservice.c + + + + + mem.c + 1 + ..\..\..\src\mem.c + + + + + mempool.c + 1 + ..\..\..\src\mempool.c + + + + + object.c + 1 + ..\..\..\src\object.c + + + + + scheduler.c + 1 + ..\..\..\src\scheduler.c + + + + + signal.c + 1 + ..\..\..\src\signal.c + + + + + thread.c + 1 + ..\..\..\src\thread.c + + + + + timer.c + 1 + ..\..\..\src\timer.c + + + + + Applications + + + main.c + 1 + applications\main.c + + + + + Drivers + + + board.c + 1 + board\board.c + + + + + stm32f4xx_hal_msp.c + 1 + board\CubeMX_Config\Src\stm32f4xx_hal_msp.c + + + + + startup_stm32f411xe.s + 2 + ..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\arm\startup_stm32f411xe.s + + + + + drv_gpio.c + 1 + ..\libraries\HAL_Drivers\drv_gpio.c + + + + + drv_usart.c + 1 + ..\libraries\HAL_Drivers\drv_usart.c + + + + + drv_spi.c + 1 + ..\libraries\HAL_Drivers\drv_spi.c + + + + + drv_common.c + 1 + ..\libraries\HAL_Drivers\drv_common.c + + + + + cpu + + + backtrace.c + 1 + ..\..\..\libcpu\arm\common\backtrace.c + + + + + div0.c + 1 + ..\..\..\libcpu\arm\common\div0.c + + + + + showmem.c + 1 + ..\..\..\libcpu\arm\common\showmem.c + + + + + cpuport.c + 1 + ..\..\..\libcpu\arm\cortex-m4\cpuport.c + + + + + context_rvds.S + 2 + ..\..\..\libcpu\arm\cortex-m4\context_rvds.S + + + + + DeviceDrivers + + + pin.c + 1 + ..\..\..\components\drivers\misc\pin.c + + + + + serial.c + 1 + ..\..\..\components\drivers\serial\serial.c + + + + + spi_core.c + 1 + ..\..\..\components\drivers\spi\spi_core.c + + + + + spi_dev.c + 1 + ..\..\..\components\drivers\spi\spi_dev.c + + + + + spi_flash_sfud.c + 1 + ..\..\..\components\drivers\spi\spi_flash_sfud.c + + + + + sfud.c + 1 + ..\..\..\components\drivers\spi\sfud\src\sfud.c + + + + + sfud_sfdp.c + 1 + ..\..\..\components\drivers\spi\sfud\src\sfud_sfdp.c + + + + + completion.c + 1 + ..\..\..\components\drivers\src\completion.c + + + + + dataqueue.c + 1 + ..\..\..\components\drivers\src\dataqueue.c + + + + + pipe.c + 1 + ..\..\..\components\drivers\src\pipe.c + + + + + ringblk_buf.c + 1 + ..\..\..\components\drivers\src\ringblk_buf.c + + + + + ringbuffer.c + 1 + ..\..\..\components\drivers\src\ringbuffer.c + + + + + waitqueue.c + 1 + ..\..\..\components\drivers\src\waitqueue.c + + + + + workqueue.c + 1 + ..\..\..\components\drivers\src\workqueue.c + + + + + + + --c99 + + + + + + + + + + finsh + + + shell.c + 1 + ..\..\..\components\finsh\shell.c + + + + + cmd.c + 1 + ..\..\..\components\finsh\cmd.c + + + + + msh.c + 1 + ..\..\..\components\finsh\msh.c + + + + + libc + + + time.c + 1 + ..\..\..\components\libc\compilers\common\time.c + + + + + STM32_HAL + + + system_stm32f4xx.c + 1 + ..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c + + + + + stm32f4xx_hal.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c + + + + + stm32f4xx_hal_cec.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c + + + + + stm32f4xx_hal_cortex.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c + + + + + stm32f4xx_hal_crc.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c + + + + + stm32f4xx_hal_cryp.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c + + + + + stm32f4xx_hal_cryp_ex.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c + + + + + stm32f4xx_hal_dma.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c + + + + + stm32f4xx_hal_dma_ex.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c + + + + + stm32f4xx_hal_pwr.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c + + + + + stm32f4xx_hal_pwr_ex.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c + + + + + stm32f4xx_hal_rcc.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c + + + + + stm32f4xx_hal_rcc_ex.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c + + + + + stm32f4xx_hal_rng.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c + + + + + stm32f4xx_hal_gpio.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c + + + + + stm32f4xx_hal_uart.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c + + + + + stm32f4xx_hal_usart.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c + + + + + stm32f4xx_hal_spi.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c + + + + + stm32f4xx_hal_qspi.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_qspi.c + + + + + + + + + + + + diff --git a/bsp/stm32/stm32f411-atk-nano/rtconfig.h b/bsp/stm32/stm32f411-atk-nano/rtconfig.h new file mode 100644 index 0000000000..2b88874a76 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/rtconfig.h @@ -0,0 +1,182 @@ +#ifndef RT_CONFIG_H__ +#define RT_CONFIG_H__ + +/* Automatically generated file; DO NOT EDIT. */ +/* RT-Thread Configuration */ + +/* RT-Thread Kernel */ + +#define RT_NAME_MAX 8 +#define RT_ALIGN_SIZE 4 +#define RT_THREAD_PRIORITY_32 +#define RT_THREAD_PRIORITY_MAX 32 +#define RT_TICK_PER_SECOND 1000 +#define RT_USING_OVERFLOW_CHECK +#define RT_USING_HOOK +#define RT_USING_IDLE_HOOK +#define RT_IDLE_HOOK_LIST_SIZE 4 +#define IDLE_THREAD_STACK_SIZE 256 +#define RT_DEBUG +#define RT_DEBUG_COLOR + +/* Inter-Thread communication */ + +#define RT_USING_SEMAPHORE +#define RT_USING_MUTEX +#define RT_USING_EVENT +#define RT_USING_MAILBOX +#define RT_USING_MESSAGEQUEUE + +/* Memory Management */ + +#define RT_USING_MEMPOOL +#define RT_USING_SMALL_MEM +#define RT_USING_HEAP + +/* Kernel Device Object */ + +#define RT_USING_DEVICE +#define RT_USING_CONSOLE +#define RT_CONSOLEBUF_SIZE 128 +#define RT_CONSOLE_DEVICE_NAME "uart1" +#define RT_VER_NUM 0x40003 +#define ARCH_ARM +#define RT_USING_CPU_FFS +#define ARCH_ARM_CORTEX_M +#define ARCH_ARM_CORTEX_M4 + +/* RT-Thread Components */ + +#define RT_USING_COMPONENTS_INIT +#define RT_USING_USER_MAIN +#define RT_MAIN_THREAD_STACK_SIZE 2048 +#define RT_MAIN_THREAD_PRIORITY 10 + +/* C++ features */ + + +/* Command shell */ + +#define RT_USING_FINSH +#define FINSH_THREAD_NAME "tshell" +#define FINSH_USING_HISTORY +#define FINSH_HISTORY_LINES 5 +#define FINSH_USING_SYMTAB +#define FINSH_USING_DESCRIPTION +#define FINSH_THREAD_PRIORITY 20 +#define FINSH_THREAD_STACK_SIZE 4096 +#define FINSH_CMD_SIZE 80 +#define FINSH_USING_MSH +#define FINSH_USING_MSH_DEFAULT +#define FINSH_USING_MSH_ONLY +#define FINSH_ARG_MAX 10 + +/* Device virtual file system */ + + +/* Device Drivers */ + +#define RT_USING_DEVICE_IPC +#define RT_PIPE_BUFSZ 512 +#define RT_USING_SERIAL +#define RT_SERIAL_USING_DMA +#define RT_SERIAL_RB_BUFSZ 64 +#define RT_USING_I2C +#define RT_USING_I2C_BITOPS +#define RT_USING_PIN +#define RT_USING_RTC +#define RT_USING_SPI +#define RT_USING_SFUD +#define RT_SFUD_USING_SFDP +#define RT_SFUD_USING_FLASH_INFO_TABLE +#define RT_SFUD_SPI_MAX_HZ 50000000 +#define RT_USING_WDT + +/* Using USB */ + + +/* POSIX layer and C standard library */ + +#define RT_USING_LIBC + +/* Network */ + +/* Socket abstraction layer */ + + +/* Network interface device */ + + +/* light weight TCP/IP stack */ + + +/* AT commands */ + + +/* VBUS(Virtual Software BUS) */ + + +/* Utilities */ + + +/* RT-Thread online packages */ + +/* IoT - internet of things */ + + +/* Wi-Fi */ + +/* Marvell WiFi */ + + +/* Wiced WiFi */ + + +/* IoT Cloud */ + + +/* security packages */ + + +/* language packages */ + + +/* multimedia packages */ + + +/* tools packages */ + + +/* system packages */ + + +/* peripheral libraries and drivers */ + + +/* miscellaneous packages */ + + +/* samples: kernel and components samples */ + +#define SOC_FAMILY_STM32 +#define SOC_SERIES_STM32F4 + +/* Hardware Drivers Config */ + +#define SOC_STM32F411RC + +/* Onboard Peripheral Drivers */ + +#define BSP_USING_USB_TO_USART + +/* On-chip Peripheral Drivers */ + +#define BSP_USING_GPIO +#define BSP_USING_UART +#define BSP_USING_UART1 +#define BSP_UART1_RX_USING_DMA + +/* Board extended module Drivers */ + + +#endif diff --git a/bsp/stm32/stm32f411-atk-nano/rtconfig.py b/bsp/stm32/stm32f411-atk-nano/rtconfig.py new file mode 100644 index 0000000000..638f59502a --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/rtconfig.py @@ -0,0 +1,143 @@ +import os + +# toolchains options +ARCH='arm' +CPU='cortex-m4' +CROSS_TOOL='gcc' + +# bsp lib config +BSP_LIBRARY_TYPE = None + +if os.getenv('RTT_CC'): + CROSS_TOOL = os.getenv('RTT_CC') +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') + +# cross_tool provides the cross compiler +# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR +if CROSS_TOOL == 'gcc': + PLATFORM = 'gcc' + EXEC_PATH = r'C:\Users\XXYYZZ' +elif CROSS_TOOL == 'keil': + PLATFORM = 'armcc' + EXEC_PATH = r'C:/Keil_v5' +elif CROSS_TOOL == 'iar': + PLATFORM = 'iar' + EXEC_PATH = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.0' + +if os.getenv('RTT_EXEC_PATH'): + EXEC_PATH = os.getenv('RTT_EXEC_PATH') + +BUILD = 'debug' + +if PLATFORM == 'gcc': + # toolchains + PREFIX = 'arm-none-eabi-' + CC = PREFIX + 'gcc' + AS = PREFIX + 'gcc' + AR = PREFIX + 'ar' + CXX = PREFIX + 'g++' + LINK = PREFIX + 'gcc' + TARGET_EXT = 'elf' + SIZE = PREFIX + 'size' + OBJDUMP = PREFIX + 'objdump' + OBJCPY = PREFIX + 'objcopy' + + DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections' + CFLAGS = DEVICE + ' -Dgcc' + AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb ' + LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rt-thread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds' + + CPATH = '' + LPATH = '' + + if BUILD == 'debug': + CFLAGS += ' -O0 -gdwarf-2 -g' + AFLAGS += ' -gdwarf-2' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + + POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n' + +elif PLATFORM == 'armcc': + # toolchains + CC = 'armcc' + CXX = 'armcc' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --cpu Cortex-M4.fp ' + CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99' + AFLAGS = DEVICE + ' --apcs=interwork ' + LFLAGS = DEVICE + ' --scatter "board\linker_scripts\link.sct" --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict' + CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include' + LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib' + + CFLAGS += ' -D__MICROLIB ' + AFLAGS += ' --pd "__MICROLIB SETA 1" ' + LFLAGS += ' --library_type=microlib ' + EXEC_PATH += '/ARM/ARMCC/bin/' + + if BUILD == 'debug': + CFLAGS += ' -g -O0' + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + CFLAGS += ' -std=c99' + + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' + +elif PLATFORM == 'iar': + # toolchains + CC = 'iccarm' + CXX = 'iccarm' + AS = 'iasmarm' + AR = 'iarchive' + LINK = 'ilinkarm' + TARGET_EXT = 'out' + + DEVICE = '-Dewarm' + + CFLAGS = DEVICE + CFLAGS += ' --diag_suppress Pa050' + CFLAGS += ' --no_cse' + CFLAGS += ' --no_unroll' + CFLAGS += ' --no_inline' + CFLAGS += ' --no_code_motion' + CFLAGS += ' --no_tbaa' + CFLAGS += ' --no_clustering' + CFLAGS += ' --no_scheduling' + CFLAGS += ' --endian=little' + CFLAGS += ' --cpu=Cortex-M4' + CFLAGS += ' -e' + CFLAGS += ' --fpu=VFPv4_sp' + CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"' + CFLAGS += ' --silent' + + AFLAGS = DEVICE + AFLAGS += ' -s+' + AFLAGS += ' -w+' + AFLAGS += ' -r' + AFLAGS += ' --cpu Cortex-M4' + AFLAGS += ' --fpu VFPv4_sp' + AFLAGS += ' -S' + + if BUILD == 'debug': + CFLAGS += ' --debug' + CFLAGS += ' -On' + else: + CFLAGS += ' -Oh' + + LFLAGS = ' --config "board/linker_scripts/link.icf"' + LFLAGS += ' --entry __iar_program_start' + + CXXFLAGS = CFLAGS + + EXEC_PATH = EXEC_PATH + '/arm/bin/' + POST_ACTION = 'ielftool --bin $TARGET rtthread.bin' diff --git a/bsp/stm32/stm32f411-atk-nano/template.ewp b/bsp/stm32/stm32f411-atk-nano/template.ewp new file mode 100644 index 0000000000..21c66ca0d0 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/template.ewp @@ -0,0 +1,2031 @@ + + + 3 + + rt-thread + + ARM + + 1 + + General + 3 + + 29 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 34 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 20 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + Release + + ARM + + 0 + + General + 3 + + 29 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 34 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 0 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 20 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 0 + + + + + + + BILINK + 0 + + + + diff --git a/bsp/stm32/stm32f411-atk-nano/template.eww b/bsp/stm32/stm32f411-atk-nano/template.eww new file mode 100644 index 0000000000..bd036bb4c9 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/template.eww @@ -0,0 +1,10 @@ + + + + + $WS_DIR$\template.ewp + + + + + diff --git a/bsp/stm32/stm32f411-atk-nano/template.uvopt b/bsp/stm32/stm32f411-atk-nano/template.uvopt new file mode 100644 index 0000000000..b53d69d5df --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/template.uvopt @@ -0,0 +1,162 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + + + + 0 + 0 + + + + rt-thread + 0x4 + ARM-ADS + + 25000000 + + 1 + 1 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\keil\List\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 0 + 0 + 1 + + 255 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 0 + 1 + 1 + 0 + 0 + 0 + 6 + + + + + + + + + + + Segger\JL2CM3.dll + + + + 0 + JL2CM3 + -U30000299 -O207 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000 + + + 0 + UL2CM3 + UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + diff --git a/bsp/stm32/stm32f411-atk-nano/template.uvoptx b/bsp/stm32/stm32f411-atk-nano/template.uvoptx new file mode 100644 index 0000000000..f6af53c4a0 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/template.uvoptx @@ -0,0 +1,189 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + rt-thread + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\keil\List\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 0 + 0 + 1 + + 18 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 5 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + ST-LINKIII-KEIL_SWO + -U-O206 -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_256.FLM -FS08000000 -FL040000 -FP0($$Device:STM32F411RCTx$CMSIS\Flash\STM32F4xx_256.FLM) + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32F4xx_256 -FL040000 -FS08000000 -FP0($$Device:STM32F411RCTx$CMSIS\Flash\STM32F4xx_256.FLM) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + 1 + 0 + 2 + 10000000 + + + + + + Source Group 1 + 0 + 0 + 0 + 0 + + + diff --git a/bsp/stm32/stm32f411-atk-nano/template.uvprojx b/bsp/stm32/stm32f411-atk-nano/template.uvprojx new file mode 100644 index 0000000000..c84b6659b2 --- /dev/null +++ b/bsp/stm32/stm32f411-atk-nano/template.uvprojx @@ -0,0 +1,393 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + rt-thread + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::ARMCC + 0 + + + STM32F411RCTx + STMicroelectronics + Keil.STM32F4xx_DFP.2.14.0 + http://www.keil.com/pack/ + IRAM(0x20000000,0x00020000) IROM(0x08000000,0x00040000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_256 -FS08000000 -FL040000 -FP0($$Device:STM32F411RCTx$CMSIS\Flash\STM32F4xx_256.FLM)) + 0 + $$Device:STM32F411RCTx$Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h + + + + + + + + + + $$Device:STM32F411RCTx$CMSIS\SVD\STM32F411xx.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\keil\Obj\ + rt-thread + 1 + 0 + 0 + 1 + 0 + .\build\keil\List\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin !L --output rtthread.bin + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + "" () + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 2 + 0 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x20000 + + + 1 + 0x8000000 + 0x40000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x40000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x20000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + 0 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + .\board\linker_scripts\link.sct + + + + + + + + + + + Source Group 1 + + + + + + + + + + + + diff --git a/bsp/stm32/stm32l475-atk-pandora/rtconfig.py b/bsp/stm32/stm32l475-atk-pandora/rtconfig.py index 573c1f7492..f09dfbc3b7 100644 --- a/bsp/stm32/stm32l475-atk-pandora/rtconfig.py +++ b/bsp/stm32/stm32l475-atk-pandora/rtconfig.py @@ -44,7 +44,7 @@ if PLATFORM == 'gcc': OBJCPY = PREFIX + 'objcopy' DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections' - CFLAGS = DEVICE + ' -Dgcc' + CFLAGS = DEVICE + ' -Dgcc -fstack-usage -fdump-rtl-dfinish' AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb ' LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rt-thread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds' diff --git a/tools/WCS.py b/tools/WCS.py new file mode 100644 index 0000000000..8625d6fff5 --- /dev/null +++ b/tools/WCS.py @@ -0,0 +1,440 @@ +import re +import pprint +import os +from subprocess import check_output +from optparse import OptionParser + +# Constants +rtl_ext_end = ".dfinish" +rtl_ext = None # e.g. '.c.270r.dfinish'. The number '270' will change with gcc version and is auto-detected by the + # function find_rtl_ext +dir = r'.' # Working directory +su_ext = '.su' +obj_ext = '.o' +manual_ext = '.msu' +read_elf_path = "arm-none-eabi-readelf.exe" # You may need to enter the full path here +stdout_encoding = "utf-8" # System dependant + + +class Printable: + def __repr__(self): + return "<" + type(self).__name__ + "> " + pprint.pformat(vars(self), indent=4, width=1) + + +class Symbol(Printable): + pass + + +def read_symbols(file): + from subprocess import check_output + + def to_symbol(read_elf_line): + v = read_elf_line.split() + + s2 = Symbol() + s2.value = int(v[1], 16) + s2.size = int(v[2]) + s2.type = v[3] + s2.binding = v[4] + if len(v) >= 8: + s2.name = v[7] + else: + s2.name = "" + + return s2 + + output = check_output([read_elf_path, "-s", "-W", file]).decode(stdout_encoding) + lines = output.splitlines()[3:] + return [to_symbol(line) for line in lines] + + +def read_obj(tu, call_graph): + """ + Reads the file tu.o and gets the binding (global or local) for each function + :param tu: name of the translation unit (e.g. for main.c, this would be 'main') + :param call_graph: a object used to store information about each function, results go here + """ + symbols = read_symbols(tu[0:tu.rindex(".")] + obj_ext) + + for s in symbols: + + if s.type == 'FUNC': + if s.binding == 'GLOBAL': + # Check for multiple declarations + if s.name in call_graph['globals'] or s.name in call_graph['locals']: + raise Exception('Multiple declarations of {}'.format(s.name)) + call_graph['globals'][s.name] = {'tu': tu, 'name': s.name, 'binding': s.binding} + elif s.binding == 'LOCAL': + # Check for multiple declarations + if s.name in call_graph['locals'] and tu in call_graph['locals'][s.name]: + raise Exception('Multiple declarations of {}'.format(s.name)) + + if s.name not in call_graph['locals']: + call_graph['locals'][s.name] = {} + + call_graph['locals'][s.name][tu] = {'tu': tu, 'name': s.name, 'binding': s.binding} + elif s.binding == 'WEAK': + if s.name in call_graph['weak']: + raise Exception('Multiple declarations of {}'.format(s.name)) + call_graph['weak'][s.name] = {'tu': tu, 'name': s.name, 'binding': s.binding} + else: + raise Exception('Error Unknown Binding "{}" for symbol: {}'.format(s.binding, s.name)) + + +def find_fxn(tu, fxn, call_graph): + """ + Looks up the dictionary associated with the function. + :param tu: The translation unit in which to look for locals functions + :param fxn: The function name + :param call_graph: a object used to store information about each function + :return: the dictionary for the given function or None + """ + + if fxn in call_graph['globals']: + return call_graph['globals'][fxn] + else: + try: + return call_graph['locals'][fxn][tu] + except KeyError: + return None + + +def find_demangled_fxn(tu, fxn, call_graph): + """ + Looks up the dictionary associated with the function. + :param tu: The translation unit in which to look for locals functions + :param fxn: The function name + :param call_graph: a object used to store information about each function + :return: the dictionary for the given function or None + """ + for f in call_graph['globals'].values(): + if 'demangledName' in f: + if f['demangledName'] == fxn: + return f + for f in call_graph['locals'].values(): + if tu in f: + if 'demangledName' in f[tu]: + if f[tu]['demangledName'] == fxn: + return f[tu] + return None + + +def read_rtl(tu, call_graph): + """ + Read an RTL file and finds callees for each function and if there are calls via function pointer. + :param tu: the translation unit + :param call_graph: a object used to store information about each function, results go here + """ + + # Construct A Call Graph + function = re.compile(r'^;; Function (.*) \((\S+), funcdef_no=\d+(, [a-z_]+=\d+)*\)( \([a-z ]+\))?$') + static_call = re.compile(r'^.*\(call.*"(.*)".*$') + other_call = re.compile(r'^.*call .*$') + + for line_ in open(tu + rtl_ext).readlines(): + m = function.match(line_) + if m: + fxn_name = m.group(2) + fxn_dict2 = find_fxn(tu, fxn_name, call_graph) + if not fxn_dict2: + pprint.pprint(call_graph) + raise Exception("Error locating function {} in {}".format(fxn_name, tu)) + + fxn_dict2['demangledName'] = m.group(1) + fxn_dict2['calls'] = set() + fxn_dict2['has_ptr_call'] = False + continue + + m = static_call.match(line_) + if m: + fxn_dict2['calls'].add(m.group(1)) + # print("Call: {0} -> {1}".format(current_fxn, m.group(1))) + continue + + m = other_call.match(line_) + if m: + fxn_dict2['has_ptr_call'] = True + continue + + +def read_su(tu, call_graph): + """ + Reads the 'local_stack' for each function. Local stack ignores stack used by callees. + :param tu: the translation unit + :param call_graph: a object used to store information about each function, results go here + :return: + """ + + su_line = re.compile(r'^([^ :]+):([\d]+):([\d]+):(.+)\t(\d+)\t(\S+)$') + i = 1 + + for line in open(tu[0:tu.rindex(".")] + su_ext).readlines(): + m = su_line.match(line) + if m: + fxn = m.group(4) + fxn_dict2 = find_demangled_fxn(tu, fxn, call_graph) + fxn_dict2['local_stack'] = int(m.group(5)) + else: + print("error parsing line {} in file {}".format(i, tu)) + i += 1 + + +def read_manual(file, call_graph): + """ + reads the manual stack useage files. + :param file: the file name + :param call_graph: a object used to store information about each function, results go here + """ + + for line in open(file).readlines(): + fxn, stack_sz = line.split() + if fxn in call_graph: + raise Exception("Redeclared Function {}".format(fxn)) + call_graph['globals'][fxn] = {'wcs': int(stack_sz), + 'calls': set(), + 'has_ptr_call': False, + 'local_stack': int(stack_sz), + 'is_manual': True, + 'name': fxn, + 'tu': '#MANUAL', + 'binding': 'GLOBAL'} + + +def validate_all_data(call_graph): + """ + Check that every entry in the call graph has the following fields: + .calls, .has_ptr_call, .local_stack, .scope, .src_line + """ + + def validate_dict(d): + if not ('calls' in d and 'has_ptr_call' in d and 'local_stack' in d + and 'name' in d and 'tu' in d): + print("Error data is missing in fxn dictionary {}".format(d)) + + # Loop through every global and local function + # and resolve each call, save results in r_calls + for fxn_dict2 in call_graph['globals'].values(): + validate_dict(fxn_dict2) + + for l_dict in call_graph['locals'].values(): + for fxn_dict2 in l_dict.values(): + validate_dict(fxn_dict2) + +def resolve_all_calls(call_graph): + def resolve_calls(fxn_dict2): + fxn_dict2['r_calls'] = [] + fxn_dict2['unresolved_calls'] = set() + + for call in fxn_dict2['calls']: + call_dict = find_fxn(fxn_dict2['tu'], call, call_graph) + if call_dict: + fxn_dict2['r_calls'].append(call_dict) + else: + fxn_dict2['unresolved_calls'].add(call) + + # Loop through every global and local function + # and resolve each call, save results in r_calls + for fxn_dict in call_graph['globals'].values(): + resolve_calls(fxn_dict) + + for l_dict in call_graph['locals'].values(): + for fxn_dict in l_dict.values(): + resolve_calls(fxn_dict) + + +def calc_all_wcs(call_graph): + def calc_wcs(fxn_dict2, call_graph1, parents): + """ + Calculates the worst case stack for a fxn that is declared (or called from) in a given file. + :param parents: This function gets called recursively through the call graph. If a function has recursion the + tuple file, fxn will be in the parents stack and everything between the top of the stack and the matching entry + has recursion. + :return: + """ + + # If the wcs is already known, then nothing to do + if 'wcs' in fxn_dict2: + return + + # Check for pointer calls + if fxn_dict2['has_ptr_call']: + fxn_dict2['wcs'] = 'unbounded' + return + + # Check for recursion + if fxn_dict2 in parents: + fxn_dict2['wcs'] = 'unbounded' + return + + # Calculate WCS + call_max = 0 + for call_dict in fxn_dict2['r_calls']: + + # Calculate the WCS for the called function + parents.append(fxn_dict2) + calc_wcs(call_dict, call_graph1, parents) + parents.pop() + + # If the called function is unbounded, so is this function + if call_dict['wcs'] == 'unbounded': + fxn_dict2['wcs'] = 'unbounded' + return + + # Keep track of the call with the largest stack use + call_max = max(call_max, call_dict['wcs']) + + # Propagate Unresolved Calls + for unresolved_call in call_dict['unresolved_calls']: + fxn_dict2['unresolved_calls'].add(unresolved_call) + + fxn_dict2['wcs'] = call_max + fxn_dict2['local_stack'] + + # Loop through every global and local function + # and resolve each call, save results in r_calls + for fxn_dict in call_graph['globals'].values(): + calc_wcs(fxn_dict, call_graph, []) + + for l_dict in call_graph['locals'].values(): + for fxn_dict in l_dict.values(): + calc_wcs(fxn_dict, call_graph, []) + + +def print_all_fxns(call_graph): + + def print_fxn(row_format, fxn_dict2): + unresolved = fxn_dict2['unresolved_calls'] + stack = str(fxn_dict2['wcs']) + if unresolved: + unresolved_str = '({})'.format(' ,'.join(unresolved)) + if stack != 'unbounded': + stack = "unbounded:" + stack + else: + unresolved_str = '' + + print(row_format.format(fxn_dict2['tu'], fxn_dict2['demangledName'], stack, unresolved_str)) + + def get_order(val): + if val == 'unbounded': + return 1 + else: + return -val + + # Loop through every global and local function + # and resolve each call, save results in r_calls + d_list = [] + for fxn_dict in call_graph['globals'].values(): + d_list.append(fxn_dict) + + for l_dict in call_graph['locals'].values(): + for fxn_dict in l_dict.values(): + d_list.append(fxn_dict) + + d_list.sort(key=lambda item: get_order(item['wcs'])) + + # Calculate table width + tu_width = max(max([len(d['tu']) for d in d_list]), 16) + name_width = max(max([len(d['name']) for d in d_list]), 13) + row_format = "{:<" + str(tu_width + 2) + "} {:<" + str(name_width + 2) + "} {:>14} {:<17}" + + # Print out the table + print("") + print(row_format.format('Translation Unit', 'Function Name', 'Stack', 'Unresolved Dependencies')) + for d in d_list: + print_fxn(row_format, d) + + +def find_rtl_ext(): + # Find the rtl_extension + global rtl_ext + + for root, directories, filenames in os.walk('.'): + for f in filenames: + if (f.endswith(rtl_ext_end)): + rtl_ext = f[f[:-len(rtl_ext_end)].rindex("."):] + print("rtl_ext = " + rtl_ext) + return + + print("Could not find any files ending with '.dfinish'. Check that the script is being run from the correct " + "directory. Check that the code was compiled with the correct flags") + exit(-1) + + +def find_files(): + tu = [] + manual = [] + all_files = [] + for root, directories, filenames in os.walk(dir): + for filename in filenames: + all_files.append(os.path.join(root,filename)) + + files = [f for f in all_files if os.path.isfile(f) and f.endswith(rtl_ext)] + for f in files: + base = f[0:-len(rtl_ext)] + short_base = base[0:base.rindex(".")] + if short_base + su_ext in all_files and short_base + obj_ext in all_files: + tu.append(base) + print('Reading: {}{}, {}{}, {}{}'.format(base, rtl_ext, short_base, su_ext, short_base, obj_ext)) + + files = [f for f in all_files if os.path.isfile(f) and f.endswith(manual_ext)] + for f in files: + manual.append(f) + print('Reading: {}'.format(f)) + + # Print some diagnostic messages + if not tu: + print("Could not find any translation units to analyse") + exit(-1) + + return tu, manual + + +def main(): + + # Find the appropriate RTL extension + find_rtl_ext() + + # Find all input files + call_graph = {'locals': {}, 'globals': {}, 'weak': {}} + tu_list, manual_list = find_files() + + # Read the input files + for tu in tu_list: + read_obj(tu, call_graph) # This must be first + + for fxn in call_graph['weak'].values(): + if fxn['name'] not in call_graph['globals'].keys(): + call_graph['globals'][fxn['name']] = fxn + + for tu in tu_list: + read_rtl(tu, call_graph) + for tu in tu_list: + read_su(tu, call_graph) + + # Read manual files + for m in manual_list: + read_manual(m, call_graph) + + # Validate Data + validate_all_data(call_graph) + + # Resolve All Function Calls + resolve_all_calls(call_graph) + + # Calculate Worst Case Stack For Each Function + calc_all_wcs(call_graph) + + # Print A Nice Message With Each Function and the WCS + print_all_fxns(call_graph) + + + + +def ThreadStackStaticAnalysis(env): + print('Start thread stack static analysis...') + + import rtconfig + read_elf_path = rtconfig.EXEC_PATH + r'\readelf.exe' + main() + + print('\nThread stack static analysis done!') + return \ No newline at end of file diff --git a/tools/building.py b/tools/building.py index 2ddeb9669b..1de54e236b 100644 --- a/tools/building.py +++ b/tools/building.py @@ -209,6 +209,11 @@ def PrepareBuilding(env, root_directory, has_libcpu=False, remove_components = [ dest = 'target', type = 'string', help = 'set target project: mdk/mdk4/mdk5/iar/vs/vsc/ua/cdk/ses/makefile/eclipse') + AddOption('--stackanalysis', + dest = 'stackanalysis', + action = 'store_true', + default = False, + help = 'thread stack static analysis') AddOption('--genconfig', dest = 'genconfig', action = 'store_true', @@ -363,6 +368,11 @@ def PrepareBuilding(env, root_directory, has_libcpu=False, remove_components = [ genconfig() exit(0) + if GetOption('stackanalysis'): + from WCS import ThreadStackStaticAnalysis + ThreadStackStaticAnalysis(Env) + exit(0) + if env['PLATFORM'] != 'win32': AddOption('--menuconfig', dest = 'menuconfig',