update dm9000 driver, init and isr.

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@293 bbd45198-f89e-11dd-88c7-29a3b14d5316
This commit is contained in:
aganhx@gmail.com 2010-01-08 14:35:52 +00:00
parent 0d6cd9bf51
commit 582dd70930
2 changed files with 86 additions and 70 deletions

View File

@ -24,8 +24,6 @@
//-------------------------------------------------------- //--------------------------------------------------------
#define DM9000_PHY 0x40 /* PHY address 0x01 */ #define DM9000_PHY 0x40 /* PHY address 0x01 */
#define RST_1() GPIO_SetBits(GPIOF,GPIO_Pin_6)
#define RST_0() GPIO_ResetBits(GPIOF,GPIO_Pin_6)
#define MAX_ADDR_LEN 6 #define MAX_ADDR_LEN 6
enum DM9000_PHY_mode enum DM9000_PHY_mode
@ -155,70 +153,80 @@ void rt_dm9000_isr(int irqno)
{ {
rt_uint16_t int_status; rt_uint16_t int_status;
rt_uint16_t last_io; rt_uint16_t last_io;
rt_uint32_t eint_pend;
last_io = DM9000_IO; eint_pend = EINTPEND;
/* EINT7 for DM9000 */
/* Disable all interrupts */ if((eint_pend & 0x80) == 0x80)
dm9000_io_write(DM9000_IMR, IMR_PAR);
/* Got DM9000 interrupt status */
int_status = dm9000_io_read(DM9000_ISR); /* Got ISR */
dm9000_io_write(DM9000_ISR, int_status); /* Clear ISR status */
DM9000_TRACE("dm9000 isr: int status %04x\n", int_status);
/* receive overflow */
if (int_status & ISR_ROS)
{ {
rt_kprintf("overflow\n");
last_io = DM9000_IO;
/* Disable all interrupts */
dm9000_io_write(DM9000_IMR, IMR_PAR);
/* Got DM9000 interrupt status */
int_status = dm9000_io_read(DM9000_ISR); /* Got ISR */
dm9000_io_write(DM9000_ISR, int_status); /* Clear ISR status */
DM9000_TRACE("dm9000 isr: int status %04x\n", int_status);
/* receive overflow */
if (int_status & ISR_ROS)
{
rt_kprintf("overflow\n");
}
if (int_status & ISR_ROOS)
{
rt_kprintf("overflow counter overflow\n");
}
/* Received the coming packet */
if (int_status & ISR_PRS)
{
/* disable receive interrupt */
dm9000_device.imr_all = IMR_PAR | IMR_PTM;
/* a frame has been received */
eth_device_ready(&(dm9000_device.parent));
}
/* Transmit Interrupt check */
if (int_status & ISR_PTS)
{
/* transmit done */
int tx_status = dm9000_io_read(DM9000_NSR); /* Got TX status */
if (tx_status & (NSR_TX2END | NSR_TX1END))
{
dm9000_device.packet_cnt --;
if (dm9000_device.packet_cnt > 0)
{
DM9000_TRACE("dm9000 isr: tx second packet\n");
/* transmit packet II */
/* Set TX length to DM9000 */
dm9000_io_write(DM9000_TXPLL, dm9000_device.queue_packet_len & 0xff);
dm9000_io_write(DM9000_TXPLH, (dm9000_device.queue_packet_len >> 8) & 0xff);
/* Issue TX polling command */
dm9000_io_write(DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
}
/* One packet sent complete */
rt_sem_release(&sem_ack);
}
}
/* Re-enable interrupt mask */
dm9000_io_write(DM9000_IMR, dm9000_device.imr_all);
DM9000_IO = last_io;
} }
if (int_status & ISR_ROOS) /* clear EINT pending bit */
{ EINTPEND = eint_pend;
rt_kprintf("overflow counter overflow\n");
}
/* Received the coming packet */
if (int_status & ISR_PRS)
{
/* disable receive interrupt */
dm9000_device.imr_all = IMR_PAR | IMR_PTM;
/* a frame has been received */
eth_device_ready(&(dm9000_device.parent));
}
/* Transmit Interrupt check */
if (int_status & ISR_PTS)
{
/* transmit done */
int tx_status = dm9000_io_read(DM9000_NSR); /* Got TX status */
if (tx_status & (NSR_TX2END | NSR_TX1END))
{
dm9000_device.packet_cnt --;
if (dm9000_device.packet_cnt > 0)
{
DM9000_TRACE("dm9000 isr: tx second packet\n");
/* transmit packet II */
/* Set TX length to DM9000 */
dm9000_io_write(DM9000_TXPLL, dm9000_device.queue_packet_len & 0xff);
dm9000_io_write(DM9000_TXPLH, (dm9000_device.queue_packet_len >> 8) & 0xff);
/* Issue TX polling command */
dm9000_io_write(DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
}
/* One packet sent complete */
rt_sem_release(&sem_ack);
}
}
/* Re-enable interrupt mask */
dm9000_io_write(DM9000_IMR, dm9000_device.imr_all);
DM9000_IO = last_io;
} }
/* RT-Thread Device Interface */ /* RT-Thread Device Interface */
@ -575,10 +583,18 @@ struct pbuf *rt_dm9000_rx(rt_device_t dev)
void rt_hw_dm9000_init() void rt_hw_dm9000_init()
{ {
// GPFCON = 0x000055AA; /* Set GPF7 as EINT7 */
// GPFUP = 0x000000FF; GPFCON = GPFCON & (~(3 << 14)) | (2 << 14);
GPFUP = GPFUP | (1 << 7);
// BANKCON4 = ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)); /* EINT7 High level interrupt */
EXTINT0 = (EXTINT0 & (~(0x7 << 28))) | (0x1 << 28);
/* Enable EINT7 */
EINTMASK = EINTMASK & (~(1<<7));
/* Set GPA15 as nGCS4 */
//GPACON |= 1 << 15;
/* DM9000 width 16, wait enable */
//BWSCON = BWSCON & (~(0x7<<16)) | (0x5<<16);
//BANKCON4 = (1<<13) | (1<<11) | (0x6<<8) | (1<<6) | (1<<4) | (0<<2) | (0);
rt_sem_init(&sem_ack, "tx_ack", 1, RT_IPC_FLAG_FIFO); rt_sem_init(&sem_ack, "tx_ack", 1, RT_IPC_FLAG_FIFO);
rt_sem_init(&sem_lock, "eth_lock", 1, RT_IPC_FLAG_FIFO); rt_sem_init(&sem_lock, "eth_lock", 1, RT_IPC_FLAG_FIFO);
@ -615,8 +631,8 @@ void rt_hw_dm9000_init()
eth_device_init(&(dm9000_device.parent), "e0"); eth_device_init(&(dm9000_device.parent), "e0");
/* instal interrupt */ /* instal interrupt */
// rt_hw_interrupt_install(INT_EXIT7, rt_dm9000_isr, RT_NULL); rt_hw_interrupt_install(INTEINT4_7, rt_dm9000_isr, RT_NULL);
// rt_hw_interrupt_umask(INT_EXIT7); rt_hw_interrupt_umask(INTEINT4_7);
} }
void dm9000a(void) void dm9000a(void)

View File

@ -1,8 +1,8 @@
#ifndef __DM9000_H__ #ifndef __DM9000_H__
#define __DM9000_H__ #define __DM9000_H__
#define DM9000_IO_BASE 0x20000000 #define DM9000_IO_BASE 0x20000300
#define DM9000_DATA_BASE 0x20000004 #define DM9000_DATA_BASE 0x20000304
#define DM9000_IO (*((volatile rt_uint16_t *) DM9000_IO_BASE)) // CMD = 0 #define DM9000_IO (*((volatile rt_uint16_t *) DM9000_IO_BASE)) // CMD = 0
#define DM9000_DATA (*((volatile rt_uint16_t *) DM9000_DATA_BASE)) // CMD = 1 #define DM9000_DATA (*((volatile rt_uint16_t *) DM9000_DATA_BASE)) // CMD = 1