libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity

[gd32][drivers] auto formatted

This commit is contained in:
Meco Man 2021-03-12 00:03:36 +08:00
parent 849c99d2fa
commit 2e99d2855b
43 changed files with 559 additions and 559 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
bsp/gd32103c-eval/drivers/drv_gpio.h
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2020, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*

2
bsp/gd32303e-eval/drivers/board.c
View File

@ -79,7 +79,7 @@ void rt_hw_board_init()
rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
#endif
#ifdef RT_USING_HEAP
#ifdef RT_USING_HEAP
rt_system_heap_init((void*)HEAP_BEGIN, (void*)HEAP_END);
#endif
}

2
bsp/gd32303e-eval/drivers/board.h
View File

@ -19,7 +19,7 @@
#include <gd32f30x.h>
// <o> Internal SRAM memory size[Kbytes] <8-64>
// <i>Default: 64
// <i>Default: 64
#ifdef __ICCARM__
// Use *.icf ram symbal, to avoid hardcode.
extern char __ICFEDIT_region_RAM_end__;

12
bsp/gd32303e-eval/drivers/drv_gpio.c
View File

@ -261,7 +261,7 @@ void gd32_pin_mode(rt_device_t dev, rt_base_t pin, rt_base_t mode)
/* GPIO Periph clock enable */
rcu_periph_clock_enable(index->clk);
pin_mode = GPIO_MODE_OUT_PP;
switch(mode)
{
case PIN_MODE_OUTPUT:
@ -442,7 +442,7 @@ rt_err_t gd32_pin_irq_enable(struct rt_device *device, rt_base_t pin, rt_uint32_
return RT_EINVAL;
}
irqmap = &pin_irq_map[hdr_index];
switch (pin_irq_hdr_tab[hdr_index].mode)
{
case PIN_IRQ_MODE_RISING:
@ -463,14 +463,14 @@ rt_err_t gd32_pin_irq_enable(struct rt_device *device, rt_base_t pin, rt_uint32_
/* enable and set interrupt priority */
nvic_irq_enable(irqmap->irqno, 5U, 0U);
/* connect EXTI line to GPIO pin */
gpio_exti_source_select(index->port_src, index->pin_src);
/* configure EXTI line */
exti_init((exti_line_enum)(index->pin), EXTI_INTERRUPT, trigger_mode);
exti_interrupt_flag_clear((exti_line_enum)(index->pin));
rt_hw_interrupt_enable(level);
}
else if (enabled == PIN_IRQ_DISABLE)
@ -505,7 +505,7 @@ int rt_hw_pin_init(void)
int result;
result = rt_device_pin_register("pin", &_gd32_pin_ops, RT_NULL);
return result;
}
INIT_BOARD_EXPORT(rt_hw_pin_init);
@ -524,7 +524,7 @@ void GD32_GPIO_EXTI_IRQHandler(rt_int8_t exti_line)
{
pin_irq_hdr(exti_line);
exti_interrupt_flag_clear((exti_line_enum)(1 << exti_line));
}
}
}
void EXTI0_IRQHandler(void)
{

8
bsp/gd32303e-eval/drivers/drv_i2c.c
View File

@ -168,7 +168,7 @@ static int gd32_i2c_read(rt_uint32_t i2c_periph, rt_uint16_t slave_address, rt_u
*p_buffer = i2c_data_receive(i2c_periph);
/* point to the next location where the byte read will be saved */
p_buffer++;
p_buffer++;
/* decrement the read bytes counter */
data_byte--;
@ -277,7 +277,7 @@ static rt_size_t gd32_i2c_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg
}
}
}
ret = i;
out:
@ -287,7 +287,7 @@ out:
}
static const struct rt_i2c_bus_device_ops i2c_ops =
{
{
gd32_i2c_xfer,
RT_NULL,
RT_NULL
@ -324,7 +324,7 @@ int rt_hw_i2c_init(void)
i2c_device.priv = (void *)&_i2c_bit_ops;
rt_i2c_bit_add_bus(&i2c_device, I2C_BUS_NAME);
}
}
#else /* register hardware I2C */

16
bsp/gd32303e-eval/drivers/drv_spi.c
View File

@ -119,7 +119,7 @@ static rt_err_t configure(struct rt_spi_device* device, struct rt_spi_configurat
spi_init_struct.prescale = SPI_PSC_256;
}
} /* baudrate */
switch(configuration->mode & RT_SPI_MODE_3)
{
case RT_SPI_MODE_0:
@ -135,7 +135,7 @@ static rt_err_t configure(struct rt_spi_device* device, struct rt_spi_configurat
spi_init_struct.clock_polarity_phase = SPI_CK_PL_HIGH_PH_2EDGE;
break;
}
/* MSB or LSB */
if(configuration->mode & RT_SPI_MSB)
{
@ -145,7 +145,7 @@ static rt_err_t configure(struct rt_spi_device* device, struct rt_spi_configurat
{
spi_init_struct.endian = SPI_ENDIAN_LSB;
}
spi_init_struct.trans_mode = SPI_TRANSMODE_FULLDUPLEX;
spi_init_struct.device_mode = SPI_MASTER;
spi_init_struct.nss = SPI_NSS_SOFT;
@ -181,7 +181,7 @@ static rt_uint32_t xfer(struct rt_spi_device* device, struct rt_spi_message* mes
const rt_uint8_t * send_ptr = message->send_buf;
rt_uint8_t * recv_ptr = message->recv_buf;
rt_uint32_t size = message->length;
DEBUG_PRINTF("spi poll transfer start: %d\n", size);
while(size--)
@ -192,7 +192,7 @@ static rt_uint32_t xfer(struct rt_spi_device* device, struct rt_spi_message* mes
{
data = *send_ptr++;
}
// Todo: replace register read/write by gd32f3 lib
//Wait until the transmit buffer is empty
while(RESET == spi_i2s_flag_get(spi_periph, SPI_FLAG_TBE));
@ -267,8 +267,8 @@ int gd32_hw_spi_init(void)
rcu_periph_clock_enable(RCU_SPI0);
/* SPI0_SCK(PA5), SPI0_MISO(PA6) and SPI0_MOSI(PA7) GPIO pin configuration */
gpio_init(GPIOA, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_5 | GPIO_PIN_7);
gpio_init(GPIOA, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_50MHZ, GPIO_PIN_6);
gpio_init(GPIOA, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_50MHZ, GPIO_PIN_6);
#endif
#ifdef RT_USING_SPI1
static struct rt_spi_bus spi_bus1;
@ -287,7 +287,7 @@ int gd32_hw_spi_init(void)
static struct rt_spi_bus spi_bus2;
spi_bus2.parent.user_data = (void *)SPI2;
result = rt_spi_bus_register(&spi_bus2, "spi2", &gd32_spi_ops);
result = rt_spi_bus_register(&spi_bus2, "spi2", &gd32_spi_ops);
rcu_periph_clock_enable(RCU_SPI2);
rcu_periph_clock_enable(RCU_GPIOB);

2
bsp/gd32303e-eval/drivers/drv_spi_flash.c
View File

@ -30,7 +30,7 @@ static int rt_hw_gd25q40_init(void)
static rt_base_t gd25q_cs_pin; /* SPI设备CS片选引脚 */
gd25q_cs_pin = GD25Q_SPI_CS_PIN;
rt_pin_mode(GD25Q_SPI_CS_PIN, GPIO_MODE_OUT_PP);
res = rt_spi_bus_attach_device(&spi_dev_gd25q, SPI_DEVICE_NAME, SPI_BUS_NAME, (void*)gd25q_cs_pin);

16
bsp/gd32303e-eval/drivers/drv_usart.c
View File

@ -44,7 +44,7 @@ struct gd32_uart
uint32_t tx_port;
uint16_t tx_pin;
uint32_t rx_port;
uint16_t rx_pin;
uint16_t rx_pin;
struct rt_serial_device * serial;
char *device_name;
@ -143,7 +143,7 @@ static const struct gd32_uart uarts[] = {
"uart0",
},
#endif
#ifdef RT_USING_USART1
{
USART1, // uart peripheral index
@ -155,7 +155,7 @@ static const struct gd32_uart uarts[] = {
"uart1",
},
#endif
#ifdef RT_USING_USART2
{
USART2, // uart peripheral index
@ -167,7 +167,7 @@ static const struct gd32_uart uarts[] = {
"uart2",
},
#endif
#ifdef RT_USING_UART3
{
UART3, // uart peripheral index
@ -179,7 +179,7 @@ static const struct gd32_uart uarts[] = {
"uart3",
},
#endif
#ifdef RT_USING_UART4
{
UART4, // uart peripheral index
@ -228,9 +228,9 @@ static rt_err_t gd32_configure(struct rt_serial_device *serial, struct serial_co
RT_ASSERT(cfg != RT_NULL);
uart = (struct gd32_uart *)serial->parent.user_data;
gd32_uart_gpio_init(uart);
usart_baudrate_set(uart->uart_periph, cfg->baud_rate);
switch (cfg->data_bits)
@ -310,7 +310,7 @@ static int gd32_putc(struct rt_serial_device *serial, char ch)
usart_data_transmit(uart->uart_periph, ch);
while((usart_flag_get(uart->uart_periph, USART_FLAG_TC) == RESET));
return 1;
}

14
bsp/gd32303e-eval/drivers/gd32f303e_eval.c
View File

@ -23,15 +23,15 @@ static uint32_t COM_RX_PIN[COMn] = {EVAL_COM1_RX_PIN, EVAL_COM2_RX_PIN};
static uint32_t COM_GPIO_PORT[COMn] = {EVAL_COM1_GPIO_PORT, EVAL_COM2_GPIO_PORT};
static rcu_periph_enum COM_GPIO_CLK[COMn] = {EVAL_COM1_GPIO_CLK, EVAL_COM2_GPIO_CLK};
static rcu_periph_enum GPIO_CLK[LEDn] = {LED2_GPIO_CLK, LED3_GPIO_CLK,
static rcu_periph_enum GPIO_CLK[LEDn] = {LED2_GPIO_CLK, LED3_GPIO_CLK,
LED4_GPIO_CLK, LED5_GPIO_CLK};
static uint32_t KEY_PORT[KEYn] = {WAKEUP_KEY_GPIO_PORT,
static uint32_t KEY_PORT[KEYn] = {WAKEUP_KEY_GPIO_PORT,
TAMPER_KEY_GPIO_PORT,
USER_KEY1_GPIO_PORT,
USER_KEY2_GPIO_PORT};
static uint32_t KEY_PIN[KEYn] = {WAKEUP_KEY_PIN, TAMPER_KEY_PIN,USER_KEY1_PIN,USER_KEY2_PIN};
static rcu_periph_enum KEY_CLK[KEYn] = {WAKEUP_KEY_GPIO_CLK,
static rcu_periph_enum KEY_CLK[KEYn] = {WAKEUP_KEY_GPIO_CLK,
TAMPER_KEY_GPIO_CLK,
USER_KEY1_GPIO_CLK,
USER_KEY2_GPIO_CLK};
@ -47,7 +47,7 @@ static uint8_t KEY_PIN_SOURCE[KEYn] = {WAKEUP_KEY_EXTI_PIN_SOURCE,
TAMPER_KEY_EXTI_PIN_SOURCE,
USER_KEY1_EXTI_PIN_SOURCE,
USER_KEY2_EXTI_PIN_SOURCE};
static uint8_t KEY_IRQn[KEYn] = {WAKEUP_KEY_EXTI_IRQn,
static uint8_t KEY_IRQn[KEYn] = {WAKEUP_KEY_EXTI_IRQn,
TAMPER_KEY_EXTI_IRQn,
USER_KEY1_EXTI_IRQn,
USER_KEY2_EXTI_IRQn};
@ -66,7 +66,7 @@ void gd_eval_led_init (led_typedef_enum lednum)
{
/* enable the led clock */
rcu_periph_clock_enable(GPIO_CLK[lednum]);
/* configure led GPIO port */
/* configure led GPIO port */
gpio_init(GPIO_PORT[lednum], GPIO_MODE_OUT_PP, GPIO_OSPEED_50MHZ,GPIO_PIN[lednum]);
GPIO_BC(GPIO_PORT[lednum]) = GPIO_PIN[lednum];
@ -114,7 +114,7 @@ void gd_eval_led_off(led_typedef_enum lednum)
*/
void gd_eval_led_toggle(led_typedef_enum lednum)
{
gpio_bit_write(GPIO_PORT[lednum], GPIO_PIN[lednum],
gpio_bit_write(GPIO_PORT[lednum], GPIO_PIN[lednum],
(bit_status)(1-gpio_input_bit_get(GPIO_PORT[lednum], GPIO_PIN[lednum])));
}
@ -184,7 +184,7 @@ void gd_eval_com_init(uint32_t com)
}else if(EVAL_COM2 == com){
com_id = 1U;
}
/* enable GPIO clock */
rcu_periph_clock_enable(COM_GPIO_CLK[com_id]);

16
bsp/gd32303e-eval/drivers/gd32f303e_eval.h
View File

@ -17,9 +17,9 @@
#endif
#include "gd32f30x.h"
/* exported types */
typedef enum
typedef enum
{
LED2 = 0,
LED3 = 1,
@ -27,7 +27,7 @@ typedef enum
LED5 = 3
} led_typedef_enum;
typedef enum
typedef enum
{
KEY_WAKEUP = 0,
KEY_TAMPER = 1,
@ -35,7 +35,7 @@ typedef enum
KEY_USER2 = 3
} key_typedef_enum;
typedef enum
typedef enum
{
KEY_MODE_GPIO = 0,
KEY_MODE_EXTI = 1
@ -47,15 +47,15 @@ typedef enum
#define LED2_PIN GPIO_PIN_0
#define LED2_GPIO_PORT GPIOF
#define LED2_GPIO_CLK RCU_GPIOF
#define LED3_PIN GPIO_PIN_1
#define LED3_GPIO_PORT GPIOF
#define LED3_GPIO_CLK RCU_GPIOF
#define LED4_PIN GPIO_PIN_2
#define LED4_GPIO_PORT GPIOF
#define LED4_GPIO_CLK RCU_GPIOF
#define LED5_PIN GPIO_PIN_3
#define LED5_GPIO_PORT GPIOF
#define LED5_GPIO_CLK RCU_GPIOF
@ -85,7 +85,7 @@ typedef enum
#define WAKEUP_KEY_EXTI_LINE EXTI_0
#define WAKEUP_KEY_EXTI_PORT_SOURCE GPIO_PORT_SOURCE_GPIOA
#define WAKEUP_KEY_EXTI_PIN_SOURCE GPIO_PIN_SOURCE_0
#define WAKEUP_KEY_EXTI_IRQn EXTI0_IRQn
#define WAKEUP_KEY_EXTI_IRQn EXTI0_IRQn
/* tamper push-button */
#define TAMPER_KEY_PIN GPIO_PIN_13

32
bsp/gd32303e-eval/drivers/gd32f303e_lcd_eval.c
View File

@ -15,7 +15,7 @@
/*!
\brief lcd peripheral initialize
\param[in] none
\param[in] none
\param[out] none
\retval none
*/
@ -37,15 +37,15 @@ void exmc_lcd_init(void)
gpio_init(GPIOD, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_0 | GPIO_PIN_1| GPIO_PIN_8 | GPIO_PIN_9 |
GPIO_PIN_10 | GPIO_PIN_14 | GPIO_PIN_15);
/* PE7(EXMC_D4), PE8(EXMC_D5), PE9(EXMC_D6), PE10(EXMC_D7), PE11(EXMC_D8), PE12(EXMC_D9),
/* PE7(EXMC_D4), PE8(EXMC_D5), PE9(EXMC_D6), PE10(EXMC_D7), PE11(EXMC_D8), PE12(EXMC_D9),
PE13(EXMC_D10), PE14(EXMC_D11), PE15(EXMC_D12) */
gpio_init(GPIOE, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_7 | GPIO_PIN_8 | GPIO_PIN_9 |
GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 |
gpio_init(GPIOE, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_7 | GPIO_PIN_8 | GPIO_PIN_9 |
GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 |
GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15);
/* configure PE2(EXMC_A23) */
/* configure PE2(EXMC_A23) */
gpio_init(GPIOE, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_2);
/* configure NOE and NWE */
gpio_init(GPIOD, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_4 | GPIO_PIN_5);
@ -106,7 +106,7 @@ uint16_t lcd_register_read(uint8_t register_id)
{
uint16_t data;
*(__IO uint16_t *) (BANK0_LCD_C)= register_id;
data = *(__IO uint16_t *) (BANK0_LCD_D);
data = *(__IO uint16_t *) (BANK0_LCD_D);
return data;
}
@ -154,13 +154,13 @@ void lcd_gram_write(uint16_t rgb_code)
uint16_t lcd_gram_read(void)
{
uint16_t data;
/* write GRAM register (R22h) */
*(__IO uint16_t *) (BANK0_LCD_C) = 0x0022;
/* dummy read (invalid data) */
*(__IO uint16_t *) (BANK0_LCD_D);
*(__IO uint16_t *) (BANK0_LCD_D);
data = *(__IO uint16_t *) (BANK0_LCD_D);
data = *(__IO uint16_t *) (BANK0_LCD_D);
return data;
}
@ -219,7 +219,7 @@ void lcd_init(void)
}else{
return;
}
for(i=50000;i>0;i--);
}
@ -277,16 +277,16 @@ void lcd_point_set(uint16_t x,uint16_t y,uint16_t point)
\param[in] x: the row-coordinate
\param[in] y: the column-coordinate
\param[out] none
\retval GRAM value of point
\retval GRAM value of point
*/
uint16_t lcd_point_get(uint16_t x,uint16_t y)
{
uint16_t data;
if ((x > 240)||(y > 320)){
return 0;
}
lcd_cursor_set(x,y);
data = lcd_gram_read();
@ -410,7 +410,7 @@ void lcd_picture_draw(uint16_t start_x,uint16_t start_y,uint16_t end_x,uint16_t
y = start_y;
total = (end_x - start_x + 1) * (end_y - start_y + 1);
for(i = 0; i < total; i ++){
/* set point according to the specified position and color */
lcd_point_set(x,y,*picturepointer++);
@ -441,7 +441,7 @@ void lcd_char_display(uint16_t x,uint16_t y,uint8_t c,char_format_struct c_forma
uint16_t i = 0, j = 0;
uint8_t temp_char = 0;
uint16_t temp_char_16 = 0;
if(CHAR_FONT_8_16 == c_format.font){ /* 8x16 ASCII */
for (i = 0; i < 16; i++) {
temp_char = ascii_8x16[((c - 0x20) * 16) + i];

2
bsp/gd32303e-eval/drivers/gd32f303e_lcd_eval.h
View File

@ -155,7 +155,7 @@
/* char format struct definitions */
typedef struct
{
{
uint16_t font; /*!< the type of font */
uint16_t direction; /*!< the direction of char */
uint16_t char_color; /*!< the color of char */

2
bsp/gd32450z-eval/drivers/board.h
View File

@ -22,7 +22,7 @@
#define EXT_SDRAM_END (EXT_SDRAM_BEGIN + (32U * 1024 * 1024)) /* the end address of external SDRAM */
// <o> Internal SRAM memory size[Kbytes] <8-64>
// <i>Default: 64
// <i>Default: 64
#ifdef __ICCARM__
// Use *.icf ram symbal, to avoid hardcode.
extern char __ICFEDIT_region_RAM_end__;

72
bsp/gd32450z-eval/drivers/drv_enet.c
View File

@ -35,16 +35,16 @@
//#define EMAC_TX_DUMP
#ifdef EMAC_DEBUG
#define EMAC_TRACE rt_kprintf
#define EMAC_TRACE rt_kprintf
#else
#define EMAC_TRACE(...)
#endif
#define EMAC_RXBUFNB 4
#define EMAC_TXBUFNB 2
#define EMAC_RXBUFNB 4
#define EMAC_TXBUFNB 2
#define EMAC_PHY_AUTO 0
#define EMAC_PHY_10MBIT 1
#define EMAC_PHY_AUTO 0
#define EMAC_PHY_10MBIT 1
#define EMAC_PHY_100MBIT 2
#define MAX_ADDR_LEN 6
@ -55,14 +55,14 @@ struct gd32_emac
rt_uint8_t phy_mode;
/* interface address info. */
rt_uint8_t dev_addr[MAX_ADDR_LEN]; /* hw address */
rt_uint8_t dev_addr[MAX_ADDR_LEN]; /* hw address */
struct rt_synopsys_eth * ETHERNET_MAC;
IRQn_Type ETHER_MAC_IRQ;
EMAC_DMADESCTypeDef *DMATxDescToSet;
EMAC_DMADESCTypeDef *DMARxDescToGet;
#pragma pack(4)
EMAC_DMADESCTypeDef DMARxDscrTab[EMAC_RXBUFNB];
#pragma pack(4)
@ -71,7 +71,7 @@ struct gd32_emac
rt_uint8_t Rx_Buff[EMAC_RXBUFNB][EMAC_MAX_PACKET_SIZE];
#pragma pack(4)
rt_uint8_t Tx_Buff[EMAC_TXBUFNB][EMAC_MAX_PACKET_SIZE];
struct rt_semaphore tx_buf_free;
};
@ -548,14 +548,14 @@ static void enet_gpio_config(void)
rcu_periph_clock_enable(RCU_GPIOG);
rcu_periph_clock_enable(RCU_GPIOH);
rcu_periph_clock_enable(RCU_GPIOI);
gpio_af_set(GPIOA, GPIO_AF_0, GPIO_PIN_8);
gpio_mode_set(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO_PIN_8);
gpio_output_options_set(GPIOA, GPIO_OTYPE_PP, GPIO_OSPEED_200MHZ,GPIO_PIN_8);
/* enable SYSCFG clock */
rcu_periph_clock_enable(RCU_SYSCFG);
/* choose DIV2 to get 50MHz from 200MHz on CKOUT0 pin (PA8) to clock the PHY */
rcu_ckout0_config(RCU_CKOUT0SRC_PLLP, RCU_CKOUT0_DIV4);
syscfg_enet_phy_interface_config(SYSCFG_ENET_PHY_RMII);
@ -563,31 +563,31 @@ static void enet_gpio_config(void)
/* PA1: ETH_RMII_REF_CLK */
gpio_mode_set(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO_PIN_1);
gpio_output_options_set(GPIOA, GPIO_OTYPE_PP, GPIO_OSPEED_200MHZ,GPIO_PIN_1);
/* PA2: ETH_MDIO */
gpio_mode_set(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO_PIN_2);
gpio_output_options_set(GPIOA, GPIO_OTYPE_PP, GPIO_OSPEED_200MHZ,GPIO_PIN_2);
/* PA7: ETH_RMII_CRS_DV */
gpio_mode_set(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO_PIN_7);
gpio_output_options_set(GPIOA, GPIO_OTYPE_PP, GPIO_OSPEED_200MHZ,GPIO_PIN_7);
gpio_output_options_set(GPIOA, GPIO_OTYPE_PP, GPIO_OSPEED_200MHZ,GPIO_PIN_7);
gpio_af_set(GPIOA, GPIO_AF_11, GPIO_PIN_1);
gpio_af_set(GPIOA, GPIO_AF_11, GPIO_PIN_2);
gpio_af_set(GPIOA, GPIO_AF_11, GPIO_PIN_7);
/* PB11: ETH_RMII_TX_EN */
gpio_mode_set(GPIOB, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO_PIN_11);
gpio_output_options_set(GPIOB, GPIO_OTYPE_PP, GPIO_OSPEED_200MHZ,GPIO_PIN_11);
/* PB12: ETH_RMII_TXD0 */
gpio_mode_set(GPIOB, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO_PIN_12);
gpio_output_options_set(GPIOB, GPIO_OTYPE_PP, GPIO_OSPEED_200MHZ,GPIO_PIN_12);
/* PB13: ETH_RMII_TXD1 */
gpio_mode_set(GPIOB, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO_PIN_13);
gpio_output_options_set(GPIOB, GPIO_OTYPE_PP, GPIO_OSPEED_200MHZ,GPIO_PIN_13);
gpio_output_options_set(GPIOB, GPIO_OTYPE_PP, GPIO_OSPEED_200MHZ,GPIO_PIN_13);
gpio_af_set(GPIOB, GPIO_AF_11, GPIO_PIN_11);
gpio_af_set(GPIOB, GPIO_AF_11, GPIO_PIN_12);
gpio_af_set(GPIOB, GPIO_AF_11, GPIO_PIN_13);
@ -599,11 +599,11 @@ static void enet_gpio_config(void)
/* PC4: ETH_RMII_RXD0 */
gpio_mode_set(GPIOC, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO_PIN_4);
gpio_output_options_set(GPIOC, GPIO_OTYPE_PP, GPIO_OSPEED_200MHZ,GPIO_PIN_4);
/* PC5: ETH_RMII_RXD1 */
gpio_mode_set(GPIOC, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO_PIN_5);
gpio_output_options_set(GPIOC, GPIO_OTYPE_PP, GPIO_OSPEED_200MHZ,GPIO_PIN_5);
gpio_output_options_set(GPIOC, GPIO_OTYPE_PP, GPIO_OSPEED_200MHZ,GPIO_PIN_5);
gpio_af_set(GPIOC, GPIO_AF_11, GPIO_PIN_1);
gpio_af_set(GPIOC, GPIO_AF_11, GPIO_PIN_4);
gpio_af_set(GPIOC, GPIO_AF_11, GPIO_PIN_5);
@ -613,17 +613,17 @@ static void enet_gpio_config(void)
int rt_hw_gd32_eth_init(void)
{
rt_kprintf("rt_gd32_eth_init...\n");
/* enable ethernet clock */
rcu_periph_clock_enable(RCU_ENET);
rcu_periph_clock_enable(RCU_ENETTX);
rcu_periph_clock_enable(RCU_ENETRX);
nvic_configuration();
/* configure the GPIO ports for ethernet pins */
enet_gpio_config();
/* set autonegotiation mode */
gd32_emac_device0.phy_mode = EMAC_PHY_AUTO;
gd32_emac_device0.ETHERNET_MAC = ETHERNET_MAC0;
@ -638,16 +638,16 @@ int rt_hw_gd32_eth_init(void)
gd32_emac_device0.dev_addr[4] = 0x34;
gd32_emac_device0.dev_addr[5] = 0x56;
gd32_emac_device0.parent.parent.init = gd32_emac_init;
gd32_emac_device0.parent.parent.open = gd32_emac_open;
gd32_emac_device0.parent.parent.close = gd32_emac_close;
gd32_emac_device0.parent.parent.read = gd32_emac_read;
gd32_emac_device0.parent.parent.write = gd32_emac_write;
gd32_emac_device0.parent.parent.control = gd32_emac_control;
gd32_emac_device0.parent.parent.init = gd32_emac_init;
gd32_emac_device0.parent.parent.open = gd32_emac_open;
gd32_emac_device0.parent.parent.close = gd32_emac_close;
gd32_emac_device0.parent.parent.read = gd32_emac_read;
gd32_emac_device0.parent.parent.write = gd32_emac_write;
gd32_emac_device0.parent.parent.control = gd32_emac_control;
gd32_emac_device0.parent.parent.user_data = RT_NULL;
gd32_emac_device0.parent.eth_rx = gd32_emac_rx;
gd32_emac_device0.parent.eth_tx = gd32_emac_tx;
gd32_emac_device0.parent.eth_rx = gd32_emac_rx;
gd32_emac_device0.parent.eth_tx = gd32_emac_tx;
/* init tx buffer free semaphore */
rt_sem_init(&gd32_emac_device0.tx_buf_free, "tx_buf0", EMAC_TXBUFNB, RT_IPC_FLAG_FIFO);

44
bsp/gd32450z-eval/drivers/drv_exmc_sdram.c
View File

@ -47,7 +47,7 @@ static void delay_1ms(volatile uint32_t count)
/*!
\brief sdram peripheral initialize
\param[in] sdram_device: specifie the SDRAM device
\param[in] sdram_device: specifie the SDRAM device
\param[out] none
\retval none
*/
@ -71,7 +71,7 @@ void exmc_synchronous_dynamic_ram_init(uint32_t sdram_device)
rcu_periph_clock_enable(RCU_GPIOH);
/* common GPIO configuration */
/* SDNWE(PC0),SDNE0(PC2),SDCKE0(PC3) pin configuration */
/* SDNWE(PC0),SDNE0(PC2),SDCKE0(PC3) pin configuration */
gpio_af_set(GPIOC, GPIO_AF_12, GPIO_PIN_0 | GPIO_PIN_2 | GPIO_PIN_3);
gpio_mode_set(GPIOC, GPIO_MODE_AF, GPIO_PUPD_PULLUP, GPIO_PIN_0 | GPIO_PIN_2 | GPIO_PIN_3);
gpio_output_options_set(GPIOC, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_0 | GPIO_PIN_2 | GPIO_PIN_3);
@ -107,11 +107,11 @@ void exmc_synchronous_dynamic_ram_init(uint32_t sdram_device)
GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15);
/* A10(PG0),A11(PG1),A12(PG2),A14(PG4),A15(PG5),SDCLK(PG8),NCAS(PG15) pin configuration */
gpio_af_set(GPIOG, GPIO_AF_12, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_4 |
gpio_af_set(GPIOG, GPIO_AF_12, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_4 |
GPIO_PIN_5 | GPIO_PIN_8 | GPIO_PIN_15);
gpio_mode_set(GPIOG, GPIO_MODE_AF, GPIO_PUPD_PULLUP, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_4 |
gpio_mode_set(GPIOG, GPIO_MODE_AF, GPIO_PUPD_PULLUP, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_4 |
GPIO_PIN_5 | GPIO_PIN_8 | GPIO_PIN_15);
gpio_output_options_set(GPIOG, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_4 |
gpio_output_options_set(GPIOG, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_4 |
GPIO_PIN_5 | GPIO_PIN_8 | GPIO_PIN_15);
/* specify which SDRAM to read and write */
@ -126,7 +126,7 @@ void exmc_synchronous_dynamic_ram_init(uint32_t sdram_device)
/* LMRD: 2 clock cycles */
sdram_timing_init_struct.load_mode_register_delay = 2;
/* XSRD: min = 67ns */
sdram_timing_init_struct.exit_selfrefresh_delay = 7;
sdram_timing_init_struct.exit_selfrefresh_delay = 7;
/* RASD: min=42ns , max=120k (ns) */
sdram_timing_init_struct.row_address_select_delay = 5;
/* ARFD: min=60ns */
@ -144,9 +144,9 @@ void exmc_synchronous_dynamic_ram_init(uint32_t sdram_device)
sdram_init_struct.row_address_width = EXMC_SDRAM_ROW_ADDRESS_13;
sdram_init_struct.data_width = EXMC_SDRAM_DATABUS_WIDTH_16B;
sdram_init_struct.internal_bank_number = EXMC_SDRAM_4_INTER_BANK;
sdram_init_struct.cas_latency = EXMC_CAS_LATENCY_3_SDCLK;
sdram_init_struct.cas_latency = EXMC_CAS_LATENCY_3_SDCLK;
sdram_init_struct.write_protection = DISABLE;
sdram_init_struct.sdclock_config = EXMC_SDCLK_PERIODS_2_HCLK;
sdram_init_struct.sdclock_config = EXMC_SDCLK_PERIODS_2_HCLK;
sdram_init_struct.brust_read_switch = ENABLE;
sdram_init_struct.pipeline_read_delay = EXMC_PIPELINE_DELAY_1_HCLK;
sdram_init_struct.timing = &sdram_timing_init_struct;
@ -158,7 +158,7 @@ void exmc_synchronous_dynamic_ram_init(uint32_t sdram_device)
sdram_command_init_struct.bank_select = bank_select;
sdram_command_init_struct.auto_refresh_number = EXMC_SDRAM_AUTO_REFLESH_1_SDCLK;
sdram_command_init_struct.mode_register_content = 0;
/* wait until the SDRAM controller is ready */
/* wait until the SDRAM controller is ready */
while((exmc_flag_get(sdram_device, EXMC_SDRAM_FLAG_NREADY) != RESET) && (timeout > 0)){
timeout--;
}
@ -174,7 +174,7 @@ void exmc_synchronous_dynamic_ram_init(uint32_t sdram_device)
sdram_command_init_struct.auto_refresh_number = EXMC_SDRAM_AUTO_REFLESH_1_SDCLK;
sdram_command_init_struct.mode_register_content = 0;
/* wait until the SDRAM controller is ready */
timeout = SDRAM_TIMEOUT;
timeout = SDRAM_TIMEOUT;
while((exmc_flag_get(sdram_device, EXMC_SDRAM_FLAG_NREADY) != RESET) && (timeout > 0)){
timeout--;
}
@ -186,8 +186,8 @@ void exmc_synchronous_dynamic_ram_init(uint32_t sdram_device)
sdram_command_init_struct.bank_select = bank_select;
sdram_command_init_struct.auto_refresh_number = EXMC_SDRAM_AUTO_REFLESH_8_SDCLK;
sdram_command_init_struct.mode_register_content = 0;
/* wait until the SDRAM controller is ready */
timeout = SDRAM_TIMEOUT;
/* wait until the SDRAM controller is ready */
timeout = SDRAM_TIMEOUT;
while((exmc_flag_get(sdram_device, EXMC_SDRAM_FLAG_NREADY) != RESET) && (timeout > 0)){
timeout--;
}
@ -207,8 +207,8 @@ void exmc_synchronous_dynamic_ram_init(uint32_t sdram_device)
sdram_command_init_struct.auto_refresh_number = EXMC_SDRAM_AUTO_REFLESH_1_SDCLK;
sdram_command_init_struct.mode_register_content = command_content;
/* wait until the SDRAM controller is ready */
timeout = SDRAM_TIMEOUT;
/* wait until the SDRAM controller is ready */
timeout = SDRAM_TIMEOUT;
while((exmc_flag_get(sdram_device, EXMC_SDRAM_FLAG_NREADY) != RESET) && (timeout > 0)){
timeout--;
}
@ -221,8 +221,8 @@ void exmc_synchronous_dynamic_ram_init(uint32_t sdram_device)
/* (7.81 us * SDCLK_Freq) - 20 */
exmc_sdram_refresh_count_set(761);
/* wait until the SDRAM controller is ready */
timeout = SDRAM_TIMEOUT;
/* wait until the SDRAM controller is ready */
timeout = SDRAM_TIMEOUT;
while((exmc_flag_get(sdram_device, EXMC_SDRAM_FLAG_NREADY) != RESET) && (timeout > 0)){
timeout--;
}
@ -258,20 +258,20 @@ void fill_buffer(uint8_t *pbuffer, uint16_t buffer_lengh, uint16_t offset)
void sdram_writebuffer_8(uint32_t sdram_device,uint8_t* pbuffer, uint32_t writeaddr, uint32_t numbytetowrite)
{
uint32_t temp_addr;
/* Select the base address according to EXMC_Bank */
if(sdram_device == EXMC_SDRAM_DEVICE0){
temp_addr = SDRAM_DEVICE0_ADDR;
}else{
temp_addr = SDRAM_DEVICE1_ADDR;
}
/* While there is data to write */
for(; numbytetowrite != 0; numbytetowrite--) {
/* Transfer data to the memory */
*(uint8_t *) (temp_addr + writeaddr) = *pbuffer++;
/* Increment the address*/
/* Increment the address*/
writeaddr += 1;
}
}
@ -288,19 +288,19 @@ void sdram_writebuffer_8(uint32_t sdram_device,uint8_t* pbuffer, uint32_t writea
void sdram_readbuffer_8(uint32_t sdram_device,uint8_t* pbuffer, uint32_t readaddr, uint32_t numbytetoread)
{
uint32_t temp_addr;
/* select the base address according to EXMC_Bank */
if(sdram_device == EXMC_SDRAM_DEVICE0){
temp_addr = SDRAM_DEVICE0_ADDR;
}else{
temp_addr = SDRAM_DEVICE1_ADDR;
}
/* while there is data to read */
for(; numbytetoread != 0; numbytetoread--){
/* read a byte from the memory */
*pbuffer++ = *(uint8_t*) (temp_addr + readaddr);
/* increment the address */
readaddr += 1;
}

114
bsp/gd32450z-eval/drivers/drv_lcd.c
View File

@ -41,7 +41,7 @@ static struct rt_device_graphic_info _lcd_info;
static struct rt_device lcd;
/*!
\brief configure TLI GPIO
\brief configure TLI GPIO
\param[in] none
\param[out] none
\retval none
@ -57,34 +57,34 @@ static void tli_gpio_config(void)
rcu_periph_clock_enable(RCU_GPIOG);
/* configure HSYNC(PC6), VSYNC(PA4), PCLK(PG7), DE(PF10) */
/* configure LCD_R7(PG6), LCD_R6(PA8), LCD_R5(PA12), LCD_R4(PA11), LCD_R3(PB0),
/* configure LCD_R7(PG6), LCD_R6(PA8), LCD_R5(PA12), LCD_R4(PA11), LCD_R3(PB0),
LCD_G7(PD3), LCD_G6(PC7), LCD_G5(PB11), LCD_G4(PB10), LCD_G3(PG10), LCD_G2(PA6),
LCD_B7(PB9), LCD_B6(PB8), LCD_B5(PA3), LCD_B4(PG12), LCD_B3(PG11) */
gpio_af_set(GPIOA,GPIO_AF_14,GPIO_PIN_3);
gpio_af_set(GPIOA,GPIO_AF_14,GPIO_PIN_3);
gpio_af_set(GPIOA,GPIO_AF_14,GPIO_PIN_4);
gpio_af_set(GPIOA,GPIO_AF_14,GPIO_PIN_6);
gpio_af_set(GPIOA,GPIO_AF_14,GPIO_PIN_12);
gpio_af_set(GPIOA,GPIO_AF_14,GPIO_PIN_11);
gpio_af_set(GPIOA,GPIO_AF_14,GPIO_PIN_8);
gpio_af_set(GPIOB,GPIO_AF_9,GPIO_PIN_0);
gpio_af_set(GPIOB,GPIO_AF_14,GPIO_PIN_10);
//gpio_af_set(GPIOB,GPIO_AF_14,GPIO_PIN_11);
gpio_af_set(GPIOB,GPIO_AF_14,GPIO_PIN_8);
gpio_af_set(GPIOB,GPIO_AF_14,GPIO_PIN_9);
gpio_af_set(GPIOC,GPIO_AF_14,GPIO_PIN_6);
gpio_af_set(GPIOC,GPIO_AF_14,GPIO_PIN_7);
gpio_af_set(GPIOD,GPIO_AF_14,GPIO_PIN_3);
gpio_af_set(GPIOA,GPIO_AF_14,GPIO_PIN_6);
gpio_af_set(GPIOA,GPIO_AF_14,GPIO_PIN_12);
gpio_af_set(GPIOA,GPIO_AF_14,GPIO_PIN_11);
gpio_af_set(GPIOA,GPIO_AF_14,GPIO_PIN_8);
gpio_af_set(GPIOF,GPIO_AF_14,GPIO_PIN_10);
gpio_af_set(GPIOG,GPIO_AF_14,GPIO_PIN_6);
gpio_af_set(GPIOB,GPIO_AF_9,GPIO_PIN_0);
gpio_af_set(GPIOB,GPIO_AF_14,GPIO_PIN_10);
//gpio_af_set(GPIOB,GPIO_AF_14,GPIO_PIN_11);
gpio_af_set(GPIOB,GPIO_AF_14,GPIO_PIN_8);
gpio_af_set(GPIOB,GPIO_AF_14,GPIO_PIN_9);
gpio_af_set(GPIOC,GPIO_AF_14,GPIO_PIN_6);
gpio_af_set(GPIOC,GPIO_AF_14,GPIO_PIN_7);
gpio_af_set(GPIOD,GPIO_AF_14,GPIO_PIN_3);
gpio_af_set(GPIOF,GPIO_AF_14,GPIO_PIN_10);
gpio_af_set(GPIOG,GPIO_AF_14,GPIO_PIN_6);
gpio_af_set(GPIOG,GPIO_AF_14,GPIO_PIN_7);
gpio_af_set(GPIOG,GPIO_AF_9,GPIO_PIN_10);
gpio_af_set(GPIOG,GPIO_AF_14,GPIO_PIN_11);
gpio_af_set(GPIOG,GPIO_AF_9,GPIO_PIN_12);
gpio_af_set(GPIOG,GPIO_AF_14,GPIO_PIN_11);
gpio_af_set(GPIOG,GPIO_AF_9,GPIO_PIN_12);
gpio_mode_set(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO_PIN_4|GPIO_PIN_3|GPIO_PIN_6
|GPIO_PIN_8|GPIO_PIN_11|GPIO_PIN_12);
@ -123,15 +123,15 @@ static void lcd_config(void)
lcd_ctrl_line_config();
lcd_disable();
lcd_enable();
/* configure the GPIO of TLI */
tli_gpio_config();
/* configure the LCD_SPI */
lcd_spi_config();
lcd_spi_config();
/* power on the LCD */
//lcd_power_on();
lcd_power_on3(); //New Version 3.5" TFT RGB Hardware needs use this initilize funtion ---By xufei 2016.10.21
lcd_power_on3(); //New Version 3.5" TFT RGB Hardware needs use this initilize funtion ---By xufei 2016.10.21
}
/*!
@ -144,7 +144,7 @@ static void tli_config(void)
{
tli_parameter_struct tli_init_struct;
tli_layer_parameter_struct tli_layer_init_struct;
rcu_periph_clock_enable(RCU_TLI);
/* configure the PLLSAI clock to generate lcd clock */
@ -156,52 +156,52 @@ static void tli_config(void)
if(ERROR == rcu_osci_stab_wait(RCU_PLLSAI_CK)){
while(1);
}
/* TLI initialization */
tli_init_struct.signalpolarity_hs = TLI_HSYN_ACTLIVE_LOW;
tli_init_struct.signalpolarity_vs = TLI_VSYN_ACTLIVE_LOW;
tli_init_struct.signalpolarity_de = TLI_DE_ACTLIVE_LOW;
tli_init_struct.signalpolarity_pixelck = TLI_PIXEL_CLOCK_TLI;
/* LCD display timing configuration */
tli_init_struct.synpsz_hpsz = LCD_480_320_HSYNC;
tli_init_struct.synpsz_vpsz = LCD_480_320_VSYNC;
tli_init_struct.backpsz_hbpsz = LCD_480_320_HSYNC + LCD_480_320_HBP;
tli_init_struct.backpsz_vbpsz = LCD_480_320_VSYNC + LCD_480_320_VBP;
tli_init_struct.backpsz_hbpsz = LCD_480_320_HSYNC + LCD_480_320_HBP;
tli_init_struct.backpsz_vbpsz = LCD_480_320_VSYNC + LCD_480_320_VBP;
tli_init_struct.activesz_hasz = RT_HW_LCD_WIDTH + LCD_480_320_HSYNC + LCD_480_320_HBP;
tli_init_struct.activesz_vasz = RT_HW_LCD_HEIGHT + LCD_480_320_VSYNC + LCD_480_320_VBP;
tli_init_struct.totalsz_htsz = RT_HW_LCD_WIDTH + LCD_480_320_HSYNC + LCD_480_320_HBP + LCD_480_320_HFP;
tli_init_struct.totalsz_htsz = RT_HW_LCD_WIDTH + LCD_480_320_HSYNC + LCD_480_320_HBP + LCD_480_320_HFP;
tli_init_struct.totalsz_vtsz = RT_HW_LCD_HEIGHT + LCD_480_320_VSYNC + LCD_480_320_VBP + LCD_480_320_VFP;
/* LCD background color configure*/
tli_init_struct.backcolor_red = 0x00;
tli_init_struct.backcolor_green = 0x00;
tli_init_struct.backcolor_blue = 0x00;
tli_init_struct.backcolor_blue = 0x00;
tli_init(&tli_init_struct);
lcd_framebuffer = rt_malloc(sizeof(rt_uint16_t) * RT_HW_LCD_HEIGHT * RT_HW_LCD_WIDTH);
RT_ASSERT(lcd_framebuffer != NULL);
rt_memset(lcd_framebuffer, 0, sizeof(rt_uint16_t) * RT_HW_LCD_WIDTH * RT_HW_LCD_HEIGHT);
/* TLI layer0 configuration */
tli_layer_init_struct.layer_window_leftpos = tli_init_struct.backpsz_hbpsz + 1;
tli_layer_init_struct.layer_window_rightpos = tli_init_struct.backpsz_hbpsz + RT_HW_LCD_WIDTH;
tli_layer_init_struct.layer_window_rightpos = tli_init_struct.backpsz_hbpsz + RT_HW_LCD_WIDTH;
tli_layer_init_struct.layer_window_toppos = tli_init_struct.backpsz_vbpsz + 1;
tli_layer_init_struct.layer_window_bottompos = tli_init_struct.backpsz_vbpsz + RT_HW_LCD_HEIGHT;
tli_layer_init_struct.layer_ppf = LAYER_PPF_RGB565;
tli_layer_init_struct.layer_sa = 0xFF;
tli_layer_init_struct.layer_default_blue = 0x00;
tli_layer_init_struct.layer_default_green = 0x00;
tli_layer_init_struct.layer_default_red = 0x00;
tli_layer_init_struct.layer_default_blue = 0x00;
tli_layer_init_struct.layer_default_green = 0x00;
tli_layer_init_struct.layer_default_red = 0x00;
tli_layer_init_struct.layer_default_alpha = 0x00;
tli_layer_init_struct.layer_acf1 = LAYER_ACF1_PASA;
tli_layer_init_struct.layer_acf1 = LAYER_ACF1_PASA;
tli_layer_init_struct.layer_acf2 = LAYER_ACF2_PASA;
tli_layer_init_struct.layer_frame_bufaddr = (uint32_t)lcd_framebuffer;
tli_layer_init_struct.layer_frame_line_length = ((RT_HW_LCD_WIDTH * 2) + 3);
tli_layer_init_struct.layer_frame_bufaddr = (uint32_t)lcd_framebuffer;
tli_layer_init_struct.layer_frame_line_length = ((RT_HW_LCD_WIDTH * 2) + 3);
tli_layer_init_struct.layer_frame_buf_stride_offset = (RT_HW_LCD_WIDTH * 2);
tli_layer_init_struct.layer_frame_total_line_number = RT_HW_LCD_HEIGHT;
tli_layer_init_struct.layer_frame_total_line_number = RT_HW_LCD_HEIGHT;
tli_layer_init(LAYER0, &tli_layer_init_struct);
}
@ -210,21 +210,21 @@ static rt_err_t rt_lcd_control(rt_device_t dev, int cmd, void *args)
switch (cmd)
{
case RTGRAPHIC_CTRL_RECT_UPDATE:
{
{
memcpy((void *)lcd_framebuffer, _rt_framebuffer, sizeof(rt_uint16_t)*RT_HW_LCD_HEIGHT * RT_HW_LCD_WIDTH);
}
break;
case RTGRAPHIC_CTRL_POWERON:
break;
case RTGRAPHIC_CTRL_POWEROFF:
break;
case RTGRAPHIC_CTRL_GET_INFO:
memcpy(args, &_lcd_info, sizeof(_lcd_info));
break;
case RTGRAPHIC_CTRL_SET_MODE:
break;
}
@ -235,21 +235,21 @@ static rt_err_t rt_lcd_control(rt_device_t dev, int cmd, void *args)
int gd32_hw_lcd_init(void)
{
_rt_framebuffer = rt_malloc_align(sizeof(rt_uint16_t) * RT_HW_LCD_WIDTH * RT_HW_LCD_HEIGHT, 32);
if (_rt_framebuffer == RT_NULL)
if (_rt_framebuffer == RT_NULL)
return -1; /* no memory yet */
lcd_config();
tli_config();
tli_layer_enable(LAYER0);
tli_layer_enable(LAYER0);
tli_reload_config(TLI_FRAME_BLANK_RELOAD_EN);
tli_enable();
_lcd_info.bits_per_pixel = LCD_BITS_PER_PIXEL;
_lcd_info.pixel_format = RTGRAPHIC_PIXEL_FORMAT_RGB565;
_lcd_info.framebuffer = (void *)_rt_framebuffer;
_lcd_info.width = RT_HW_LCD_WIDTH;
_lcd_info.height = RT_HW_LCD_HEIGHT;
lcd.type = RT_Device_Class_Graphic;
lcd.init = NULL;
lcd.open = NULL;
@ -258,10 +258,10 @@ int gd32_hw_lcd_init(void)
lcd.write = NULL;
lcd.control = rt_lcd_control;
lcd.user_data = (void *)&_lcd_info;
/* register lcd device to RT-Thread */
rt_device_register(&lcd, "lcd", RT_DEVICE_FLAG_RDWR);
return 0;
}
INIT_DEVICE_EXPORT(gd32_hw_lcd_init);

56
bsp/gd32450z-eval/drivers/drv_spi.c
View File

@ -11,7 +11,7 @@
* Date Author Notes
* 2017-06-05 tanek first implementation.
*/
#include "drv_spi.h"
#include <board.h>
@ -32,7 +32,7 @@
#ifdef DEBUG
#define DEBUG_PRINTF(...) rt_kprintf(__VA_ARGS__)
#else
#define DEBUG_PRINTF(...)
#define DEBUG_PRINTF(...)
#endif
/* private rt-thread spi ops function */
@ -48,16 +48,16 @@ static struct rt_spi_ops gd32_spi_ops =
static rt_err_t configure(struct rt_spi_device* device,
struct rt_spi_configuration* configuration)
{
struct rt_spi_bus * spi_bus = (struct rt_spi_bus *)device->bus;
struct rt_spi_bus * spi_bus = (struct rt_spi_bus *)device->bus;
struct gd32f4_spi *f4_spi = (struct gd32f4_spi *)spi_bus->parent.user_data;
spi_parameter_struct spi_init_struct;
uint32_t spi_periph = f4_spi->spi_periph;
RT_ASSERT(device != RT_NULL);
RT_ASSERT(configuration != RT_NULL);
RT_ASSERT(device != RT_NULL);
RT_ASSERT(configuration != RT_NULL);
/* data_width */
if(configuration->data_width <= 8)
@ -129,7 +129,7 @@ static rt_err_t configure(struct rt_spi_device* device,
spi_init_struct.prescale = SPI_PSC_256;
}
} /* baudrate */
switch(configuration->mode & RT_SPI_MODE_3)
{
case RT_SPI_MODE_0:
@ -137,15 +137,15 @@ static rt_err_t configure(struct rt_spi_device* device,
break;
case RT_SPI_MODE_1:
spi_init_struct.clock_polarity_phase = SPI_CK_PL_LOW_PH_2EDGE;
break;
break;
case RT_SPI_MODE_2:
spi_init_struct.clock_polarity_phase = SPI_CK_PL_HIGH_PH_1EDGE;
break;
break;
case RT_SPI_MODE_3:
spi_init_struct.clock_polarity_phase = SPI_CK_PL_HIGH_PH_2EDGE;
break;
}
/* MSB or LSB */
if(configuration->mode & RT_SPI_MSB)
{
@ -155,18 +155,18 @@ static rt_err_t configure(struct rt_spi_device* device,
{
spi_init_struct.endian = SPI_ENDIAN_LSB;
}
spi_init_struct.trans_mode = SPI_TRANSMODE_FULLDUPLEX;
spi_init_struct.device_mode = SPI_MASTER;
spi_init_struct.nss = SPI_NSS_SOFT;
spi_crc_off(spi_periph);
/* init SPI */
spi_init(spi_periph, &spi_init_struct);
/* Enable SPI_MASTER */
spi_enable(spi_periph);
spi_enable(spi_periph);
return RT_EOK;
};
@ -178,9 +178,9 @@ static rt_uint32_t xfer(struct rt_spi_device* device, struct rt_spi_message* mes
struct gd32_spi_cs * gd32_spi_cs = device->parent.user_data;
uint32_t spi_periph = f4_spi->spi_periph;
RT_ASSERT(device != NULL);
RT_ASSERT(message != NULL);
RT_ASSERT(device != NULL);
RT_ASSERT(message != NULL);
/* take CS */
if(message->cs_take)
{
@ -194,7 +194,7 @@ static rt_uint32_t xfer(struct rt_spi_device* device, struct rt_spi_message* mes
const rt_uint8_t * send_ptr = message->send_buf;
rt_uint8_t * recv_ptr = message->recv_buf;
rt_uint32_t size = message->length;
DEBUG_PRINTF("spi poll transfer start: %d\n", size);
while(size--)
@ -205,12 +205,12 @@ static rt_uint32_t xfer(struct rt_spi_device* device, struct rt_spi_message* mes
{
data = *send_ptr++;
}
// Todo: replace register read/write by gd32f4 lib
//Wait until the transmit buffer is empty
while(RESET == spi_i2s_flag_get(spi_periph, SPI_FLAG_TBE));
// Send the byte
spi_i2s_data_transmit(spi_periph, data);
spi_i2s_data_transmit(spi_periph, data);
//Wait until a data is received
while(RESET == spi_i2s_flag_get(spi_periph, SPI_FLAG_RBNE));
@ -242,7 +242,7 @@ static rt_uint32_t xfer(struct rt_spi_device* device, struct rt_spi_message* mes
//Wait until the transmit buffer is empty
while(RESET == spi_i2s_flag_get(spi_periph, SPI_FLAG_TBE));
// Send the byte
spi_i2s_data_transmit(spi_periph, data);
spi_i2s_data_transmit(spi_periph, data);
//Wait until a data is received
while(RESET == spi_i2s_flag_get(spi_periph, SPI_FLAG_RBNE));
@ -260,7 +260,7 @@ static rt_uint32_t xfer(struct rt_spi_device* device, struct rt_spi_message* mes
/* release CS */
if(message->cs_release)
{
gpio_bit_set(gd32_spi_cs->GPIOx, gd32_spi_cs->GPIO_Pin);
gpio_bit_set(gd32_spi_cs->GPIOx, gd32_spi_cs->GPIO_Pin);
DEBUG_PRINTF("spi release cs\n");
}
@ -274,7 +274,7 @@ static const struct gd32f4_spi spis[] = {
#ifdef RT_USING_SPI0
{SPI0, RCU_SPI0, &spi_bus[0]},
#endif
#ifdef RT_USING_SPI1
{SPI1, RCU_SPI1, &spi_bus[1]},
#endif
@ -286,11 +286,11 @@ static const struct gd32f4_spi spis[] = {
#ifdef RT_USING_SPI3
{SPI3, RCU_SPI3, &spi_bus[3]},
#endif
#ifdef RT_USING_SPI4
{SPI4, RCU_SPI4, &spi_bus[4]},
#endif
#ifdef RT_USING_SPI5
{SPI5, RCU_SPI5, &spi_bus[5]},
#endif
@ -310,9 +310,9 @@ rt_err_t gd32_spi_bus_register(uint32_t spi_periph,
const char * spi_bus_name)
{
int i;
RT_ASSERT(spi_bus_name != RT_NULL);
for (i = 0; i < ARR_LEN(spis); i++)
{
if (spi_periph == spis[i].spi_periph)
@ -323,7 +323,7 @@ rt_err_t gd32_spi_bus_register(uint32_t spi_periph,
return RT_EOK;
}
}
return RT_ERROR;
}
#endif

4
bsp/gd32450z-eval/drivers/drv_spi.h
View File

@ -36,7 +36,7 @@ struct gd32_spi_cs
/* public function */
rt_err_t gd32_spi_bus_register(uint32_t spi_periph,
//struct gd32_spi_bus * gd32_spi,
const char * spi_bus_name);
//struct gd32_spi_bus * gd32_spi,
const char * spi_bus_name);
#endif // gd32F20X_40X_SPI_H_INCLUDED

32
bsp/gd32450z-eval/drivers/drv_spi_flash.c
View File

@ -32,8 +32,8 @@ static int rt_hw_spi5_init(void)
{
/* register spi bus */
{
rt_err_t result;
rt_err_t result;
rcu_periph_clock_enable(RCU_GPIOG);
rcu_periph_clock_enable(RCU_SPI5);
@ -42,36 +42,36 @@ static int rt_hw_spi5_init(void)
gpio_mode_set(GPIOG, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO_PIN_10|GPIO_PIN_11| GPIO_PIN_12|GPIO_PIN_13| GPIO_PIN_14);
gpio_output_options_set(GPIOG, GPIO_OTYPE_PP, GPIO_OSPEED_200MHZ, GPIO_PIN_10|GPIO_PIN_11| GPIO_PIN_12|GPIO_PIN_13| GPIO_PIN_14);
result = gd32_spi_bus_register(SPI5, SPI_BUS_NAME);
result = gd32_spi_bus_register(SPI5, SPI_BUS_NAME);
if (result != RT_EOK)
{
return result;
}
{
return result;
}
}
/* attach cs */
{
static struct rt_spi_device spi_device;
static struct gd32_spi_cs spi_cs;
rt_err_t result;
rt_err_t result;
spi_cs.GPIOx = GPIOG;
spi_cs.GPIO_Pin = GPIO_PIN_9;
/* SPI5_CS(PG9) GPIO pin configuration */
gpio_mode_set(GPIOG, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO_PIN_9);
gpio_output_options_set(GPIOG, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_9);
gpio_bit_set(GPIOG,GPIO_PIN_9);
result = rt_spi_bus_attach_device(&spi_device, SPI_FLASH_DEVICE_NAME, SPI_BUS_NAME, (void*)&spi_cs);
if (result != RT_EOK)
{
return result;
}
if (result != RT_EOK)
{
return result;
}
}
return RT_EOK;
return RT_EOK;
}
INIT_DEVICE_EXPORT(rt_hw_spi5_init);
@ -83,7 +83,7 @@ static int rt_hw_spi_flash_with_sfud_init(void)
return RT_ERROR;
};
return RT_EOK;
return RT_EOK;
}
INIT_COMPONENT_EXPORT(rt_hw_spi_flash_with_sfud_init)
#endif

24
bsp/gd32450z-eval/drivers/drv_usart.c
View File

@ -37,7 +37,7 @@
struct gd32_uart
{
uint32_t uart_periph; //Todo: 3bits
IRQn_Type irqn; //Todo: 7bits
IRQn_Type irqn; //Todo: 7bits
rcu_periph_enum per_clk; //Todo: 5bits
rcu_periph_enum tx_gpio_clk; //Todo: 5bits
rcu_periph_enum rx_gpio_clk; //Todo: 5bits
@ -48,7 +48,7 @@ struct gd32_uart
uint16_t rx_af; //Todo: 4bits
uint16_t rx_pin; //Todo: 4bits
struct rt_serial_device * serial;
struct rt_serial_device * serial;
char *device_name;
};
@ -193,7 +193,7 @@ static const struct gd32_uart uarts[] = {
"uart0",
},
#endif
#ifdef BSP_USING_UART1
{
USART1, // uart peripheral index
@ -205,7 +205,7 @@ static const struct gd32_uart uarts[] = {
"uart1",
},
#endif
#ifdef BSP_USING_UART2
{
USART2, // uart peripheral index
@ -217,7 +217,7 @@ static const struct gd32_uart uarts[] = {
"uart2",
},
#endif
#ifdef BSP_USING_UART3
{
UART3, // uart peripheral index
@ -229,7 +229,7 @@ static const struct gd32_uart uarts[] = {
"uart3",
},
#endif
#ifdef BSP_USING_UART4
{
UART4, // uart peripheral index
@ -253,7 +253,7 @@ static const struct gd32_uart uarts[] = {
"uart5",
},
#endif
#ifdef BSP_USING_UART6
{
UART6, // uart peripheral index
@ -309,7 +309,7 @@ void gd32_uart_gpio_init(struct gd32_uart *uart)
/* configure USART Rx as alternate function push-pull */
gpio_mode_set(uart->rx_port, GPIO_MODE_AF, GPIO_PUPD_PULLUP, uart->rx_pin);
gpio_output_options_set(uart->rx_port, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, uart->rx_pin);
NVIC_SetPriority(uart->irqn, 0);
NVIC_EnableIRQ(uart->irqn);
}
@ -322,9 +322,9 @@ static rt_err_t gd32_configure(struct rt_serial_device *serial, struct serial_co
RT_ASSERT(cfg != RT_NULL);
uart = (struct gd32_uart *)serial->parent.user_data;
gd32_uart_gpio_init(uart);
usart_baudrate_set(uart->uart_periph, cfg->baud_rate);
switch (cfg->data_bits)
@ -404,7 +404,7 @@ static int gd32_putc(struct rt_serial_device *serial, char ch)
usart_data_transmit(uart->uart_periph, ch);
while((usart_flag_get(uart->uart_periph, USART_FLAG_TC) == RESET));
return 1;
}
@ -456,7 +456,7 @@ int gd32_hw_usart_init(void)
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
int i;
for (i = 0; i < sizeof(uarts) / sizeof(uarts[0]); i++)
{
uarts[i].serial->ops = &gd32_uart_ops;

14
bsp/gd32450z-eval/drivers/gd32f450z_eval.h
View File

@ -17,23 +17,23 @@
#endif
#include "gd32f4xx.h"
/* exported types */
typedef enum
typedef enum
{
LED1 = 0,
LED2 = 1,
LED3 = 2
} led_typedef_enum;
typedef enum
typedef enum
{
KEY_WAKEUP = 0,
KEY_TAMPER = 1,
KEY_USER = 2
} key_typedef_enum;
typedef enum
typedef enum
{
KEY_MODE_GPIO = 0,
KEY_MODE_EXTI = 1
@ -45,11 +45,11 @@ typedef enum
#define LED1_PIN GPIO_PIN_4
#define LED1_GPIO_PORT GPIOD
#define LED1_GPIO_CLK RCU_GPIOD
#define LED2_PIN GPIO_PIN_5
#define LED2_GPIO_PORT GPIOD
#define LED2_GPIO_CLK RCU_GPIOD
#define LED3_PIN GPIO_PIN_3
#define LED3_GPIO_PORT GPIOG
#define LED3_GPIO_CLK RCU_GPIOG
@ -83,7 +83,7 @@ typedef enum
#define WAKEUP_KEY_EXTI_LINE EXTI_0
#define WAKEUP_KEY_EXTI_PORT_SOURCE EXTI_SOURCE_GPIOA
#define WAKEUP_KEY_EXTI_PIN_SOURCE EXTI_SOURCE_PIN0
#define WAKEUP_KEY_EXTI_IRQn EXTI0_IRQn
#define WAKEUP_KEY_EXTI_IRQn EXTI0_IRQn
/* user push-button */
#define USER_KEY_PIN GPIO_PIN_14

142
bsp/gd32450z-eval/drivers/gd32f450z_lcd_eval.c
View File

@ -108,8 +108,8 @@ void lcd_spi_config(void)
gpio_mode_set(GPIOG, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO_PIN_13|GPIO_PIN_14);
gpio_output_options_set(GPIOG, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_13|GPIO_PIN_14);
spi_i2s_deinit(SPI5);
if(0 == (SPI_CTL0(LCD_SPI) & SPI_CTL0_SPIEN)){
if(0 == (SPI_CTL0(LCD_SPI) & SPI_CTL0_SPIEN)){
spi_init_struct.trans_mode = SPI_TRANSMODE_FULLDUPLEX;
spi_init_struct.device_mode = SPI_MASTER;
spi_init_struct.frame_size = SPI_FRAMESIZE_8BIT;
@ -155,7 +155,7 @@ void lcd_data_write(uint8_t value)
/* set LCD_RS to send data */
lcd_ctrl_line_set(LCD_RS_GPIO_PORT, LCD_RS_PIN);
/* reset LCD control line and send data */
/* reset LCD control line and send data */
lcd_disable();
while(RESET == spi_i2s_flag_get(LCD_SPI, SPI_FLAG_TBE)) ;
@ -228,80 +228,80 @@ void lcd_power_on(void)
}
/**
* @brief New Version 3.5" TFT RGB Hardware needs add this initilize funtion ---By xufei 2016.10.21
Modified by GAO HAIYANG, test pass, 17, Nov, 2016
Modified by GAO HAIYANG, test pass, 17, Nov, 2016
* @param None
* @retval None
*/
void lcd_power_on3(void)
{
lcd_command_write(0xC0);//power control1 command/w/
lcd_data_write(0x0A); // P-Gamma level//4.1875v
lcd_data_write(0x0A); // N-Gamma level
lcd_command_write(0xC1); // BT & VC Setting//power contrl2 command/w/
lcd_data_write(0x41);
lcd_data_write(0x07); // VCI1 = 2.5V
lcd_command_write(0xC2); // DC1.DC0 Setting//power control3 for normal mode
lcd_data_write(0x33);
lcd_command_write(0xC5);//VCOM control
lcd_data_write(0x00); //NV memory is not programmed
lcd_data_write(0x42); // VCM Setting
lcd_data_write(0x80); // VCM Register Enable
lcd_command_write(0xB0); //interface mode control //Polarity Setting
lcd_data_write(0x02);
lcd_command_write(0xB1);//frame rate control for normal mode
lcd_data_write(0xB0); // Frame Rate Setting//70 frame per second//no division for internal clocks
lcd_data_write(0x11);//17 clocks per line period for idle mode at cpu interface
lcd_command_write(0xB4);//dispaly inversion control
lcd_data_write(0x00); // disable Z-inversion , column inversion
lcd_command_write(0xB6); //display function control// RM.DM Setting
lcd_data_write(0x70);////0xF0
lcd_data_write(0x02);//direction of gate scan: G1->G480 one by one, source scan: S1->S960, scan cycle if interval scan in non-display area
lcd_data_write(0x3B); // number of lines to drive LCD: 8*(0x3C) = 480
lcd_command_write(0xB7); // Entry Mode
lcd_data_write(0x07); // disable low voltage detection, normal display,
lcd_command_write(0xF0); // Enter ENG , must be set before gamma setting
lcd_data_write(0x36);
lcd_data_write(0xA5);
lcd_data_write(0xD3);
lcd_command_write(0xE5); // Open gamma function , must be set before gamma setting
lcd_data_write(0x80);
lcd_command_write(0xE5); // Page 1
lcd_data_write(0x01);
lcd_command_write(0XB3); // WEMODE=0(Page 1) , pixels over window setting will be ignored.//frame rate control in partial mode/full colors
lcd_data_write(0x00);
lcd_command_write(0xE5); // Page 0
lcd_data_write(0x00);
lcd_command_write(0xF0); // Exit ENG , must be set before gamma setting
lcd_data_write(0x36);
lcd_data_write(0xA5);
lcd_data_write(0x53);
lcd_command_write(0xE0); // Gamma setting
//y fine adjustment register for positive polarity
lcd_data_write(0x00);
lcd_data_write(0x35);
lcd_data_write(0x33);
//y gradient adjustment register for positive polarity
lcd_data_write(0x00);
//y amplitude adjustment register for positive polarity
lcd_data_write(0x00);
lcd_data_write(0x00);
//y fine adjustment register for negative polarity
lcd_data_write(0x00);
lcd_data_write(0x35);
lcd_data_write(0x33);
//y gradient adjustment register for negative polarity
lcd_data_write(0x00);
//y amplitude adjustment register for negative polarity
lcd_data_write(0x00);
lcd_data_write(0x00);
lcd_command_write(0x36); // memory data access control //
lcd_data_write(0x48);//
lcd_command_write(0x3A); // interface pixel format setting
lcd_data_write(0x55);//16-bits
lcd_command_write(0x11); // Exit sleep mode
lcd_command_write(0x29); // Display on
lcd_command_write(0xC0);//power control1 command/w/
lcd_data_write(0x0A); // P-Gamma level//4.1875v
lcd_data_write(0x0A); // N-Gamma level
lcd_command_write(0xC1); // BT & VC Setting//power contrl2 command/w/
lcd_data_write(0x41);
lcd_data_write(0x07); // VCI1 = 2.5V
lcd_command_write(0xC2); // DC1.DC0 Setting//power control3 for normal mode
lcd_data_write(0x33);
lcd_command_write(0xC5);//VCOM control
lcd_data_write(0x00); //NV memory is not programmed
lcd_data_write(0x42); // VCM Setting
lcd_data_write(0x80); // VCM Register Enable
lcd_command_write(0xB0); //interface mode control //Polarity Setting
lcd_data_write(0x02);
lcd_command_write(0xB1);//frame rate control for normal mode
lcd_data_write(0xB0); // Frame Rate Setting//70 frame per second//no division for internal clocks
lcd_data_write(0x11);//17 clocks per line period for idle mode at cpu interface
lcd_command_write(0xB4);//dispaly inversion control
lcd_data_write(0x00); // disable Z-inversion , column inversion
lcd_command_write(0xB6); //display function control// RM.DM Setting
lcd_data_write(0x70);////0xF0
lcd_data_write(0x02);//direction of gate scan: G1->G480 one by one, source scan: S1->S960, scan cycle if interval scan in non-display area
lcd_data_write(0x3B); // number of lines to drive LCD: 8*(0x3C) = 480
lcd_command_write(0xB7); // Entry Mode
lcd_data_write(0x07); // disable low voltage detection, normal display,
lcd_command_write(0xF0); // Enter ENG , must be set before gamma setting
lcd_data_write(0x36);
lcd_data_write(0xA5);
lcd_data_write(0xD3);
lcd_command_write(0xE5); // Open gamma function , must be set before gamma setting
lcd_data_write(0x80);
lcd_command_write(0xE5); // Page 1
lcd_data_write(0x01);
lcd_command_write(0XB3); // WEMODE=0(Page 1) , pixels over window setting will be ignored.//frame rate control in partial mode/full colors
lcd_data_write(0x00);
lcd_command_write(0xE5); // Page 0
lcd_data_write(0x00);
lcd_command_write(0xF0); // Exit ENG , must be set before gamma setting
lcd_data_write(0x36);
lcd_data_write(0xA5);
lcd_data_write(0x53);
lcd_command_write(0xE0); // Gamma setting
//y fine adjustment register for positive polarity
lcd_data_write(0x00);
lcd_data_write(0x35);
lcd_data_write(0x33);
//y gradient adjustment register for positive polarity
lcd_data_write(0x00);
//y amplitude adjustment register for positive polarity
lcd_data_write(0x00);
lcd_data_write(0x00);
//y fine adjustment register for negative polarity
lcd_data_write(0x00);
lcd_data_write(0x35);
lcd_data_write(0x33);
//y gradient adjustment register for negative polarity
lcd_data_write(0x00);
//y amplitude adjustment register for negative polarity
lcd_data_write(0x00);
lcd_data_write(0x00);
lcd_command_write(0x36); // memory data access control //
lcd_data_write(0x48);//
lcd_command_write(0x3A); // interface pixel format setting
lcd_data_write(0x55);//16-bits
lcd_command_write(0x11); // Exit sleep mode
lcd_command_write(0x29); // Display on
delay(10);
delay(10);
}
/*!
\brief insert a delay time

8
bsp/gd32450z-eval/drivers/gd32f450z_lcd_eval.h
View File

@ -13,10 +13,10 @@
#define GD32F450Z_LCD_EVAL_H
#include "gd32f450z_eval.h"
#define LCD_CS_PIN GPIO_PIN_11
#define LCD_CS_GPIO_PORT GPIOD
#define LCD_CS_GPIO_CLK RCU_GPIOD
#define LCD_CS_GPIO_CLK RCU_GPIOD
#define LCD_RS_PIN GPIO_PIN_3
#define LCD_RS_GPIO_PORT GPIOE
@ -28,7 +28,7 @@
#define LCD_SPI_MOSI_PIN GPIO_PIN_14
#define LCD_SPI_MOSI_GPIO_PORT GPIOG
#define LCD_SPI_MOSI_GPIO_CLK RCU_GPIOG
#define LCD_SPI_MOSI_GPIO_CLK RCU_GPIOG
#define LCD_SPI SPI5
#define LCD_SPI_CLK RCU_SPI5
@ -52,4 +52,4 @@ void lcd_data_write(uint8_t value);
/* configure the LCD based on the power on sequence */
void lcd_power_on(void);
void lcd_power_on3(void);
#endif /* GD32F450Z_LCD_EVAL_H */
#endif /* GD32F450Z_LCD_EVAL_H */

290
bsp/gd32450z-eval/drivers/synopsys_emac.h
View File

@ -22,7 +22,7 @@
#define __SYNOPSYS_EMAC_H__
#include <rtthread.h>
/******************************************************************************/
/* Ethernet MAC Registers bits definitions */
@ -48,8 +48,8 @@
#define EMAC_MACCR_RD ((rt_uint32_t)0x00000200) /* Retry disable */
#define EMAC_MACCR_APCS ((rt_uint32_t)0x00000080) /* Automatic Pad/CRC stripping */
#define EMAC_MACCR_BL ((rt_uint32_t)0x00000060) /* Back-off limit: random integer number (r) of slot time delays before rescheduling
a transmission attempt during retries after a collision: 0 =< r <2^k */
#define EMAC_MACCR_BL_10 ((rt_uint32_t)0x00000000) /* k = min (n, 10) */
a transmission attempt during retries after a collision: 0 =< r <2^k */
#define EMAC_MACCR_BL_10 ((rt_uint32_t)0x00000000) /* k = min (n, 10) */
#define EMAC_MACCR_BL_8 ((rt_uint32_t)0x00000020) /* k = min (n, 8) */
#define EMAC_MACCR_BL_4 ((rt_uint32_t)0x00000040) /* k = min (n, 4) */
#define EMAC_MACCR_BL_1 ((rt_uint32_t)0x00000060) /* k = min (n, 1) */
@ -60,45 +60,45 @@
/* Bit definition for Ethernet MAC Frame Filter Register */
#define EMAC_MACFFR_RA ((rt_uint32_t)0x80000000) /* Receive all */
#define EMAC_MACFFR_HPF ((rt_uint32_t)0x00000400) /* Hash or perfect filter */
#define EMAC_MACFFR_SAF ((rt_uint32_t)0x00000200) /* Source address filter enable */
#define EMAC_MACFFR_SAF ((rt_uint32_t)0x00000200) /* Source address filter enable */
#define EMAC_MACFFR_SAIF ((rt_uint32_t)0x00000100) /* SA inverse filtering */
#define EMAC_MACFFR_PCF ((rt_uint32_t)0x000000C0) /* Pass control frames: 3 cases */
#define EMAC_MACFFR_PCF_BlockAll ((rt_uint32_t)0x00000040) /* MAC filters all control frames from reaching the application */
#define EMAC_MACFFR_PCF_ForwardAll ((rt_uint32_t)0x00000080) /* MAC forwards all control frames to application even if they fail the Address Filter */
#define EMAC_MACFFR_PCF_ForwardPassedAddrFilter ((rt_uint32_t)0x000000C0) /* MAC forwards control frames that pass the Address Filter. */
#define EMAC_MACFFR_BFD ((rt_uint32_t)0x00000020) /* Broadcast frame disable */
#define EMAC_MACFFR_PAM ((rt_uint32_t)0x00000010) /* Pass all mutlicast */
#define EMAC_MACFFR_PAM ((rt_uint32_t)0x00000010) /* Pass all mutlicast */
#define EMAC_MACFFR_DAIF ((rt_uint32_t)0x00000008) /* DA Inverse filtering */
#define EMAC_MACFFR_HM ((rt_uint32_t)0x00000004) /* Hash multicast */
#define EMAC_MACFFR_HU ((rt_uint32_t)0x00000002) /* Hash unicast */
#define EMAC_MACFFR_PM ((rt_uint32_t)0x00000001) /* Promiscuous mode */
#define EMAC_MACFFR_HM ((rt_uint32_t)0x00000004) /* Hash multicast */
#define EMAC_MACFFR_HU ((rt_uint32_t)0x00000002) /* Hash unicast */
#define EMAC_MACFFR_PM ((rt_uint32_t)0x00000001) /* Promiscuous mode */
/* Bit definition for Ethernet MAC Hash Table High Register */
#define EMAC_MACHTHR_HTH ((rt_uint32_t)0xFFFFFFFF) /* Hash table high */
#define EMAC_MACHTHR_HTH ((rt_uint32_t)0xFFFFFFFF) /* Hash table high */
/* Bit definition for Ethernet MAC Hash Table Low Register */
#define EMAC_MACHTLR_HTL ((rt_uint32_t)0xFFFFFFFF) /* Hash table low */
#define EMAC_MACHTLR_HTL ((rt_uint32_t)0xFFFFFFFF) /* Hash table low */
/* Bit definition for Ethernet MAC MII Address Register */
#define EMAC_MACMIIAR_PA ((rt_uint32_t)0x0000F800) /* Physical layer address */
#define EMAC_MACMIIAR_MR ((rt_uint32_t)0x000007C0) /* MII register in the selected PHY */
#define EMAC_MACMIIAR_CR ((rt_uint32_t)0x0000001C) /* CR clock range: 6 cases */
#define EMAC_MACMIIAR_PA ((rt_uint32_t)0x0000F800) /* Physical layer address */
#define EMAC_MACMIIAR_MR ((rt_uint32_t)0x000007C0) /* MII register in the selected PHY */
#define EMAC_MACMIIAR_CR ((rt_uint32_t)0x0000001C) /* CR clock range: 6 cases */
#define EMAC_MACMIIAR_CR_Div42 ((rt_uint32_t)0x00000000) /* HCLK:60-100 MHz; MDC clock= HCLK/42 */
#define EMAC_MACMIIAR_CR_Div62 ((rt_uint32_t)0x00000004) /* HCLK:100-150 MHz; MDC clock= HCLK/62 */
#define EMAC_MACMIIAR_CR_Div16 ((rt_uint32_t)0x00000008) /* HCLK:20-35 MHz; MDC clock= HCLK/16 */
#define EMAC_MACMIIAR_CR_Div26 ((rt_uint32_t)0x0000000C) /* HCLK:35-60 MHz; MDC clock= HCLK/26 */
#define EMAC_MACMIIAR_CR_Div102 ((rt_uint32_t)0x00000010) /* HCLK:150-250 MHz; MDC clock= HCLK/102 */
#define EMAC_MACMIIAR_CR_Div122 ((rt_uint32_t)0x00000014) /* HCLK:250-300 MHz; MDC clock= HCLK/122*/
#define EMAC_MACMIIAR_MW ((rt_uint32_t)0x00000002) /* MII write */
#define EMAC_MACMIIAR_MB ((rt_uint32_t)0x00000001) /* MII busy */
#define EMAC_MACMIIAR_MW ((rt_uint32_t)0x00000002) /* MII write */
#define EMAC_MACMIIAR_MB ((rt_uint32_t)0x00000001) /* MII busy */
/* Bit definition for Ethernet MAC MII Data Register */
#define EMAC_MACMIIDR_MD ((rt_uint32_t)0x0000FFFF) /* MII data: read/write data from/to PHY */
#define EMAC_MACMIIDR_MD ((rt_uint32_t)0x0000FFFF) /* MII data: read/write data from/to PHY */
/* Bit definition for Ethernet MAC Flow Control Register */
#define EMAC_MACFCR_PT ((rt_uint32_t)0xFFFF0000) /* Pause time */
#define EMAC_MACFCR_ZQPD ((rt_uint32_t)0x00000080) /* Zero-quanta pause disable */
#define EMAC_MACFCR_PLT ((rt_uint32_t)0x00000030) /* Pause low threshold: 4 cases */
#define EMAC_MACFCR_PT ((rt_uint32_t)0xFFFF0000) /* Pause time */
#define EMAC_MACFCR_ZQPD ((rt_uint32_t)0x00000080) /* Zero-quanta pause disable */
#define EMAC_MACFCR_PLT ((rt_uint32_t)0x00000030) /* Pause low threshold: 4 cases */
#define EMAC_MACFCR_PLT_Minus4 ((rt_uint32_t)0x00000000) /* Pause time minus 4 slot times */
#define EMAC_MACFCR_PLT_Minus28 ((rt_uint32_t)0x00000010) /* Pause time minus 28 slot times */
#define EMAC_MACFCR_PLT_Minus144 ((rt_uint32_t)0x00000020) /* Pause time minus 144 slot times */
@ -441,7 +441,7 @@
#define EMAC_DMACHRBAR_HRBAP ((rt_uint32_t)0xFFFFFFFF) /* Host receive buffer address pointer */
//typedef enum {
// RESET = 0, SET = !RESET
// RESET = 0, SET = !RESET
//} FlagStatus, ITStatus;
//typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
@ -450,165 +450,165 @@
*/
typedef struct
{
/**
* MAC
*/
rt_uint32_t EMAC_AutoNegotiation; /* Selects or not the AutoNegotiation mode for the external PHY
The AutoNegotiation allows an automatic setting of the Speed (10/100Mbps)
and the mode (half/full-duplex).
This parameter can be a value of @ref EMAC_AutoNegotiation */
/**
* MAC
*/
rt_uint32_t EMAC_AutoNegotiation; /* Selects or not the AutoNegotiation mode for the external PHY
The AutoNegotiation allows an automatic setting of the Speed (10/100Mbps)
and the mode (half/full-duplex).
This parameter can be a value of @ref EMAC_AutoNegotiation */
rt_uint32_t EMAC_Watchdog; /* Selects or not the Watchdog timer
When enabled, the MAC allows no more then 2048 bytes to be received.
When disabled, the MAC can receive up to 16384 bytes.
This parameter can be a value of @ref EMAC_watchdog */
rt_uint32_t EMAC_Watchdog; /* Selects or not the Watchdog timer
When enabled, the MAC allows no more then 2048 bytes to be received.
When disabled, the MAC can receive up to 16384 bytes.
This parameter can be a value of @ref EMAC_watchdog */
rt_uint32_t EMAC_Jabber; /* Selects or not Jabber timer
When enabled, the MAC allows no more then 2048 bytes to be sent.
When disabled, the MAC can send up to 16384 bytes.
This parameter can be a value of @ref EMAC_Jabber */
rt_uint32_t EMAC_Jabber; /* Selects or not Jabber timer
When enabled, the MAC allows no more then 2048 bytes to be sent.
When disabled, the MAC can send up to 16384 bytes.
This parameter can be a value of @ref EMAC_Jabber */
rt_uint32_t EMAC_InterFrameGap; /* Selects the minimum IFG between frames during transmission
This parameter can be a value of @ref EMAC_Inter_Frame_Gap */
rt_uint32_t EMAC_InterFrameGap; /* Selects the minimum IFG between frames during transmission
This parameter can be a value of @ref EMAC_Inter_Frame_Gap */
rt_uint32_t EMAC_CarrierSense; /* Selects or not the Carrier Sense
This parameter can be a value of @ref EMAC_Carrier_Sense */
rt_uint32_t EMAC_CarrierSense; /* Selects or not the Carrier Sense
This parameter can be a value of @ref EMAC_Carrier_Sense */
rt_uint32_t EMAC_Speed; /* Sets the Ethernet speed: 10/100 Mbps
This parameter can be a value of @ref EMAC_Speed */
rt_uint32_t EMAC_Speed; /* Sets the Ethernet speed: 10/100 Mbps
This parameter can be a value of @ref EMAC_Speed */
rt_uint32_t EMAC_ReceiveOwn; /* Selects or not the ReceiveOwn
ReceiveOwn allows the reception of frames when the TX_EN signal is asserted
in Half-Duplex mode
This parameter can be a value of @ref EMAC_Receive_Own */
rt_uint32_t EMAC_ReceiveOwn; /* Selects or not the ReceiveOwn
ReceiveOwn allows the reception of frames when the TX_EN signal is asserted
in Half-Duplex mode
This parameter can be a value of @ref EMAC_Receive_Own */
rt_uint32_t EMAC_LoopbackMode; /* Selects or not the internal MAC MII Loopback mode
This parameter can be a value of @ref EMAC_Loop_Back_Mode */
rt_uint32_t EMAC_LoopbackMode; /* Selects or not the internal MAC MII Loopback mode
This parameter can be a value of @ref EMAC_Loop_Back_Mode */
rt_uint32_t EMAC_Mode; /* Selects the MAC duplex mode: Half-Duplex or Full-Duplex mode
This parameter can be a value of @ref EMAC_Duplex_Mode */
rt_uint32_t EMAC_Mode; /* Selects the MAC duplex mode: Half-Duplex or Full-Duplex mode
This parameter can be a value of @ref EMAC_Duplex_Mode */
rt_uint32_t EMAC_ChecksumOffload; /* Selects or not the IPv4 checksum checking for received frame payloads' TCP/UDP/ICMP headers.
This parameter can be a value of @ref EMAC_Checksum_Offload */
rt_uint32_t EMAC_ChecksumOffload; /* Selects or not the IPv4 checksum checking for received frame payloads' TCP/UDP/ICMP headers.
This parameter can be a value of @ref EMAC_Checksum_Offload */
rt_uint32_t EMAC_RetryTransmission; /* Selects or not the MAC attempt retries transmission, based on the settings of BL,
when a colision occurs (Half-Duplex mode)
This parameter can be a value of @ref EMAC_Retry_Transmission */
rt_uint32_t EMAC_RetryTransmission; /* Selects or not the MAC attempt retries transmission, based on the settings of BL,
when a colision occurs (Half-Duplex mode)
This parameter can be a value of @ref EMAC_Retry_Transmission */
rt_uint32_t EMAC_AutomaticPadCRCStrip; /* Selects or not the Automatic MAC Pad/CRC Stripping
This parameter can be a value of @ref EMAC_Automatic_Pad_CRC_Strip */
rt_uint32_t EMAC_AutomaticPadCRCStrip; /* Selects or not the Automatic MAC Pad/CRC Stripping
This parameter can be a value of @ref EMAC_Automatic_Pad_CRC_Strip */
rt_uint32_t EMAC_BackOffLimit; /* Selects the BackOff limit value
This parameter can be a value of @ref EMAC_Back_Off_Limit */
rt_uint32_t EMAC_BackOffLimit; /* Selects the BackOff limit value
This parameter can be a value of @ref EMAC_Back_Off_Limit */
rt_uint32_t EMAC_DeferralCheck; /* Selects or not the deferral check function (Half-Duplex mode)
This parameter can be a value of @ref EMAC_Deferral_Check */
rt_uint32_t EMAC_DeferralCheck; /* Selects or not the deferral check function (Half-Duplex mode)
This parameter can be a value of @ref EMAC_Deferral_Check */
rt_uint32_t EMAC_ReceiveAll; /* Selects or not all frames reception by the MAC (No fitering)
This parameter can be a value of @ref EMAC_Receive_All */
rt_uint32_t EMAC_ReceiveAll; /* Selects or not all frames reception by the MAC (No fitering)
This parameter can be a value of @ref EMAC_Receive_All */
rt_uint32_t EMAC_SourceAddrFilter; /* Selects the Source Address Filter mode
This parameter can be a value of @ref EMAC_Source_Addr_Filter */
rt_uint32_t EMAC_SourceAddrFilter; /* Selects the Source Address Filter mode
This parameter can be a value of @ref EMAC_Source_Addr_Filter */
rt_uint32_t EMAC_PassControlFrames; /* Sets the forwarding mode of the control frames (including unicast and multicast PAUSE frames)
This parameter can be a value of @ref EMAC_Pass_Control_Frames */
rt_uint32_t EMAC_PassControlFrames; /* Sets the forwarding mode of the control frames (including unicast and multicast PAUSE frames)
This parameter can be a value of @ref EMAC_Pass_Control_Frames */
rt_uint32_t EMAC_BroadcastFramesReception; /* Selects or not the reception of Broadcast Frames
This parameter can be a value of @ref EMAC_Broadcast_Frames_Reception */
rt_uint32_t EMAC_BroadcastFramesReception; /* Selects or not the reception of Broadcast Frames
This parameter can be a value of @ref EMAC_Broadcast_Frames_Reception */
rt_uint32_t EMAC_DestinationAddrFilter; /* Sets the destination filter mode for both unicast and multicast frames
This parameter can be a value of @ref EMAC_Destination_Addr_Filter */
rt_uint32_t EMAC_DestinationAddrFilter; /* Sets the destination filter mode for both unicast and multicast frames
This parameter can be a value of @ref EMAC_Destination_Addr_Filter */
rt_uint32_t EMAC_PromiscuousMode; /* Selects or not the Promiscuous Mode
This parameter can be a value of @ref EMAC_Promiscuous_Mode */
rt_uint32_t EMAC_PromiscuousMode; /* Selects or not the Promiscuous Mode
This parameter can be a value of @ref EMAC_Promiscuous_Mode */
rt_uint32_t EMAC_MulticastFramesFilter; /* Selects the Multicast Frames filter mode: None/HashTableFilter/PerfectFilter/PerfectHashTableFilter
This parameter can be a value of @ref EMAC_Multicast_Frames_Filter */
rt_uint32_t EMAC_MulticastFramesFilter; /* Selects the Multicast Frames filter mode: None/HashTableFilter/PerfectFilter/PerfectHashTableFilter
This parameter can be a value of @ref EMAC_Multicast_Frames_Filter */
rt_uint32_t EMAC_UnicastFramesFilter; /* Selects the Unicast Frames filter mode: HashTableFilter/PerfectFilter/PerfectHashTableFilter
This parameter can be a value of @ref EMAC_Unicast_Frames_Filter */
rt_uint32_t EMAC_UnicastFramesFilter; /* Selects the Unicast Frames filter mode: HashTableFilter/PerfectFilter/PerfectHashTableFilter
This parameter can be a value of @ref EMAC_Unicast_Frames_Filter */
rt_uint32_t EMAC_HashTableHigh; /* This field holds the higher 32 bits of Hash table. */
rt_uint32_t EMAC_HashTableHigh; /* This field holds the higher 32 bits of Hash table. */
rt_uint32_t EMAC_HashTableLow; /* This field holds the lower 32 bits of Hash table. */
rt_uint32_t EMAC_HashTableLow; /* This field holds the lower 32 bits of Hash table. */
rt_uint32_t EMAC_PauseTime; /* This field holds the value to be used in the Pause Time field in the
transmit control frame */
rt_uint32_t EMAC_PauseTime; /* This field holds the value to be used in the Pause Time field in the
transmit control frame */
rt_uint32_t EMAC_ZeroQuantaPause; /* Selects or not the automatic generation of Zero-Quanta Pause Control frames
This parameter can be a value of @ref EMAC_Zero_Quanta_Pause */
rt_uint32_t EMAC_ZeroQuantaPause; /* Selects or not the automatic generation of Zero-Quanta Pause Control frames
This parameter can be a value of @ref EMAC_Zero_Quanta_Pause */
rt_uint32_t EMAC_PauseLowThreshold; /* This field configures the threshold of the PAUSE to be checked for
automatic retransmission of PAUSE Frame
This parameter can be a value of @ref EMAC_Pause_Low_Threshold */
rt_uint32_t EMAC_PauseLowThreshold; /* This field configures the threshold of the PAUSE to be checked for
automatic retransmission of PAUSE Frame
This parameter can be a value of @ref EMAC_Pause_Low_Threshold */
rt_uint32_t EMAC_UnicastPauseFrameDetect; /* Selects or not the MAC detection of the Pause frames (with MAC Address0
unicast address and unique multicast address)
This parameter can be a value of @ref EMAC_Unicast_Pause_Frame_Detect */
rt_uint32_t EMAC_UnicastPauseFrameDetect; /* Selects or not the MAC detection of the Pause frames (with MAC Address0
unicast address and unique multicast address)
This parameter can be a value of @ref EMAC_Unicast_Pause_Frame_Detect */
rt_uint32_t EMAC_ReceiveFlowControl; /* Enables or disables the MAC to decode the received Pause frame and
disable its transmitter for a specified time (Pause Time)
This parameter can be a value of @ref EMAC_Receive_Flow_Control */
rt_uint32_t EMAC_ReceiveFlowControl; /* Enables or disables the MAC to decode the received Pause frame and
disable its transmitter for a specified time (Pause Time)
This parameter can be a value of @ref EMAC_Receive_Flow_Control */
rt_uint32_t EMAC_TransmitFlowControl; /* Enables or disables the MAC to transmit Pause frames (Full-Duplex mode)
or the MAC back-pressure operation (Half-Duplex mode)
This parameter can be a value of @ref EMAC_Transmit_Flow_Control */
rt_uint32_t EMAC_TransmitFlowControl; /* Enables or disables the MAC to transmit Pause frames (Full-Duplex mode)
or the MAC back-pressure operation (Half-Duplex mode)
This parameter can be a value of @ref EMAC_Transmit_Flow_Control */
rt_uint32_t EMAC_VLANTagComparison; /* Selects the 12-bit VLAN identifier or the complete 16-bit VLAN tag for
comparison and filtering
This parameter can be a value of @ref EMAC_VLAN_Tag_Comparison */
rt_uint32_t EMAC_VLANTagComparison; /* Selects the 12-bit VLAN identifier or the complete 16-bit VLAN tag for
comparison and filtering
This parameter can be a value of @ref EMAC_VLAN_Tag_Comparison */
rt_uint32_t EMAC_VLANTagIdentifier; /* Holds the VLAN tag identifier for receive frames */
rt_uint32_t EMAC_VLANTagIdentifier; /* Holds the VLAN tag identifier for receive frames */
/**
* DMA
*/
/**
* DMA
*/
rt_uint32_t EMAC_DropTCPIPChecksumErrorFrame; /* Selects or not the Dropping of TCP/IP Checksum Error Frames
This parameter can be a value of @ref EMAC_Drop_TCP_IP_Checksum_Error_Frame */
rt_uint32_t EMAC_DropTCPIPChecksumErrorFrame; /* Selects or not the Dropping of TCP/IP Checksum Error Frames
This parameter can be a value of @ref EMAC_Drop_TCP_IP_Checksum_Error_Frame */
rt_uint32_t EMAC_ReceiveStoreForward; /* Enables or disables the Receive store and forward mode
This parameter can be a value of @ref EMAC_Receive_Store_Forward */
rt_uint32_t EMAC_ReceiveStoreForward; /* Enables or disables the Receive store and forward mode
This parameter can be a value of @ref EMAC_Receive_Store_Forward */
rt_uint32_t EMAC_FlushReceivedFrame; /* Enables or disables the flushing of received frames
This parameter can be a value of @ref EMAC_Flush_Received_Frame */
rt_uint32_t EMAC_FlushReceivedFrame; /* Enables or disables the flushing of received frames
This parameter can be a value of @ref EMAC_Flush_Received_Frame */
rt_uint32_t EMAC_TransmitStoreForward; /* Enables or disables Transmit store and forward mode
This parameter can be a value of @ref EMAC_Transmit_Store_Forward */
rt_uint32_t EMAC_TransmitStoreForward; /* Enables or disables Transmit store and forward mode
This parameter can be a value of @ref EMAC_Transmit_Store_Forward */
rt_uint32_t EMAC_TransmitThresholdControl; /* Selects or not the Transmit Threshold Control
This parameter can be a value of @ref EMAC_Transmit_Threshold_Control */
rt_uint32_t EMAC_TransmitThresholdControl; /* Selects or not the Transmit Threshold Control
This parameter can be a value of @ref EMAC_Transmit_Threshold_Control */
rt_uint32_t EMAC_ForwardErrorFrames; /* Selects or not the forward to the DMA of erroneous frames
This parameter can be a value of @ref EMAC_Forward_Error_Frames */
rt_uint32_t EMAC_ForwardErrorFrames; /* Selects or not the forward to the DMA of erroneous frames
This parameter can be a value of @ref EMAC_Forward_Error_Frames */
rt_uint32_t EMAC_ForwardUndersizedGoodFrames; /* Enables or disables the Rx FIFO to forward Undersized frames (frames with no Error
and length less than 64 bytes) including pad-bytes and CRC)
This parameter can be a value of @ref EMAC_Forward_Undersized_Good_Frames */
rt_uint32_t EMAC_ForwardUndersizedGoodFrames; /* Enables or disables the Rx FIFO to forward Undersized frames (frames with no Error
and length less than 64 bytes) including pad-bytes and CRC)
This parameter can be a value of @ref EMAC_Forward_Undersized_Good_Frames */
rt_uint32_t EMAC_ReceiveThresholdControl; /* Selects the threshold level of the Receive FIFO
This parameter can be a value of @ref EMAC_Receive_Threshold_Control */
rt_uint32_t EMAC_ReceiveThresholdControl; /* Selects the threshold level of the Receive FIFO
This parameter can be a value of @ref EMAC_Receive_Threshold_Control */
rt_uint32_t EMAC_SecondFrameOperate; /* Selects or not the Operate on second frame mode, which allows the DMA to process a second
frame of Transmit data even before obtaining the status for the first frame.
This parameter can be a value of @ref EMAC_Second_Frame_Operate */
rt_uint32_t EMAC_SecondFrameOperate; /* Selects or not the Operate on second frame mode, which allows the DMA to process a second
frame of Transmit data even before obtaining the status for the first frame.
This parameter can be a value of @ref EMAC_Second_Frame_Operate */
rt_uint32_t EMAC_AddressAlignedBeats; /* Enables or disables the Address Aligned Beats
This parameter can be a value of @ref EMAC_Address_Aligned_Beats */
rt_uint32_t EMAC_AddressAlignedBeats; /* Enables or disables the Address Aligned Beats
This parameter can be a value of @ref EMAC_Address_Aligned_Beats */
rt_uint32_t EMAC_FixedBurst; /* Enables or disables the AHB Master interface fixed burst transfers
This parameter can be a value of @ref EMAC_Fixed_Burst */
rt_uint32_t EMAC_FixedBurst; /* Enables or disables the AHB Master interface fixed burst transfers
This parameter can be a value of @ref EMAC_Fixed_Burst */
rt_uint32_t EMAC_RxDMABurstLength; /* Indicates the maximum number of beats to be transferred in one Rx DMA transaction
This parameter can be a value of @ref EMAC_Rx_DMA_Burst_Length */
rt_uint32_t EMAC_RxDMABurstLength; /* Indicates the maximum number of beats to be transferred in one Rx DMA transaction
This parameter can be a value of @ref EMAC_Rx_DMA_Burst_Length */
rt_uint32_t EMAC_TxDMABurstLength; /* Indicates sthe maximum number of beats to be transferred in one Tx DMA transaction
This parameter can be a value of @ref EMAC_Tx_DMA_Burst_Length */
rt_uint32_t EMAC_TxDMABurstLength; /* Indicates sthe maximum number of beats to be transferred in one Tx DMA transaction
This parameter can be a value of @ref EMAC_Tx_DMA_Burst_Length */
rt_uint32_t EMAC_DescriptorSkipLength; /* Specifies the number of word to skip between two unchained int (Ring mode) */
rt_uint32_t EMAC_DescriptorSkipLength; /* Specifies the number of word to skip between two unchained int (Ring mode) */
rt_uint32_t EMAC_DMAArbitration; /* Selects the DMA Tx/Rx arbitration
This parameter can be a value of @ref EMAC_DMA_Arbitration */
rt_uint32_t EMAC_DMAArbitration; /* Selects the DMA Tx/Rx arbitration
This parameter can be a value of @ref EMAC_DMA_Arbitration */
} EMAC_InitTypeDef;
/**--------------------------------------------------------------------------**/
@ -622,10 +622,10 @@ typedef struct
*/
typedef struct
{
rt_uint32_t Status; /* Status */
rt_uint32_t ControlBufferSize; /* Control and Buffer1, Buffer2 lengths */
rt_uint32_t Buffer1Addr; /* Buffer1 address pointer */
rt_uint32_t Buffer2NextDescAddr; /* Buffer2 or next descriptor address pointer */
rt_uint32_t Status; /* Status */
rt_uint32_t ControlBufferSize; /* Control and Buffer1, Buffer2 lengths */
rt_uint32_t Buffer1Addr; /* Buffer1 address pointer */
rt_uint32_t Buffer2NextDescAddr; /* Buffer2 or next descriptor address pointer */
} EMAC_DMADESCTypeDef;
/**--------------------------------------------------------------------------**/
@ -634,14 +634,14 @@ typedef struct
*/
/**--------------------------------------------------------------------------**/
#define EMAC_MAX_PACKET_SIZE 1520 /* EMAC_HEADER + EMAC_EXTRA + MAX_EMAC_PAYLOAD + EMAC_CRC */
#define EMAC_HEADER 14 /* 6 byte Dest addr, 6 byte Src addr, 2 byte length/type */
#define EMAC_CRC 4 /* Ethernet CRC */
#define EMAC_EXTRA 2 /* Extra bytes in some cases */
#define VLAN_TAG 4 /* optional 802.1q VLAN Tag */
#define MIN_EMAC_PAYLOAD 46 /* Minimum Ethernet payload size */
#define MAX_EMAC_PAYLOAD 1500 /* Maximum Ethernet payload size */
#define JUMBO_FRAME_PAYLOAD 9000 /* Jumbo frame payload size */
#define EMAC_MAX_PACKET_SIZE 1520 /* EMAC_HEADER + EMAC_EXTRA + MAX_EMAC_PAYLOAD + EMAC_CRC */
#define EMAC_HEADER 14 /* 6 byte Dest addr, 6 byte Src addr, 2 byte length/type */
#define EMAC_CRC 4 /* Ethernet CRC */
#define EMAC_EXTRA 2 /* Extra bytes in some cases */
#define VLAN_TAG 4 /* optional 802.1q VLAN Tag */
#define MIN_EMAC_PAYLOAD 46 /* Minimum Ethernet payload size */
#define MAX_EMAC_PAYLOAD 1500 /* Maximum Ethernet payload size */
#define JUMBO_FRAME_PAYLOAD 9000 /* Jumbo frame payload size */
/**--------------------------------------------------------------------------**/
/**
@ -1098,7 +1098,7 @@ struct rt_synopsys_eth
volatile rt_uint32_t FCR;
volatile rt_uint32_t VTR;
rt_uint8_t RESERVED0[8];
volatile rt_uint32_t RWFFR;
volatile rt_uint32_t PMTR;
volatile rt_uint32_t LPICSR;

2
bsp/gd32e230k-start/applications/main.c
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2019, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*

4
bsp/gd32e230k-start/drivers/board.c
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2019, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
@ -75,7 +75,7 @@ void rt_hw_board_init()
rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
#endif
#ifdef RT_USING_HEAP
#ifdef RT_USING_HEAP
rt_system_heap_init((void*)HEAP_BEGIN, (void*)HEAP_END);
#endif
}

4
bsp/gd32e230k-start/drivers/board.h
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2019, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
@ -15,7 +15,7 @@
#include <gd32e230.h>
// <o> Internal SRAM memory size[Kbytes] <8-64>
// <i>Default: 64
// <i>Default: 64
#ifdef __ICCARM__
// Use *.icf ram symbal, to avoid hardcode.
extern char __ICFEDIT_region_RAM_end__;

46
bsp/gd32e230k-start/drivers/drv_gpio.c
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2019, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
@ -29,8 +29,8 @@ struct pin_index
rcu_periph_enum clk;
rt_uint32_t gpio_periph;
rt_uint32_t pin;
rt_uint32_t port_src;
rt_uint32_t pin_src;
rt_uint32_t port_src;
rt_uint32_t pin_src;
};
static const struct pin_index pins[] =
@ -38,8 +38,8 @@ static const struct pin_index pins[] =
__GD32_PIN_DEFAULT,
__GD32_PIN(2, F, 0),
__GD32_PIN(3, F, 1),
__GD32_PIN_DEFAULT,
__GD32_PIN_DEFAULT,
__GD32_PIN_DEFAULT,
__GD32_PIN_DEFAULT,
__GD32_PIN(6, A, 0),
__GD32_PIN(7, A, 1),
__GD32_PIN(8, A, 2),
@ -51,7 +51,7 @@ static const struct pin_index pins[] =
__GD32_PIN(14, B, 0),
__GD32_PIN(15, B, 1),
__GD32_PIN(16, B, 2),
__GD32_PIN_DEFAULT,
__GD32_PIN_DEFAULT,
__GD32_PIN(18, A, 8),
__GD32_PIN(19, A, 9),
__GD32_PIN(20, A, 10),
@ -136,8 +136,8 @@ void gd32_pin_mode(rt_device_t dev, rt_base_t pin, rt_base_t mode)
{
const struct pin_index *index;
rt_uint32_t pin_mode;
rt_uint32_t otype;
rt_uint32_t pull_up_down;
rt_uint32_t otype;
rt_uint32_t pull_up_down;
index = get_pin(pin);
if (index == RT_NULL)
{
@ -147,9 +147,9 @@ void gd32_pin_mode(rt_device_t dev, rt_base_t pin, rt_base_t mode)
/* GPIO Periph clock enable */
rcu_periph_clock_enable(index->clk);
pin_mode = GPIO_MODE_OUTPUT;
otype = GPIO_OTYPE_PP;
pull_up_down = GPIO_PUPD_NONE;
otype = GPIO_OTYPE_PP;
pull_up_down = GPIO_PUPD_NONE;
switch(mode)
{
case PIN_MODE_OUTPUT:
@ -157,7 +157,7 @@ void gd32_pin_mode(rt_device_t dev, rt_base_t pin, rt_base_t mode)
break;
case PIN_MODE_OUTPUT_OD:
/* output setting: od. */
otype = GPIO_OTYPE_OD;
otype = GPIO_OTYPE_OD;
break;
case PIN_MODE_INPUT:
/* input setting: not pull. */
@ -166,20 +166,20 @@ void gd32_pin_mode(rt_device_t dev, rt_base_t pin, rt_base_t mode)
case PIN_MODE_INPUT_PULLUP:
/* input setting: pull up. */
pin_mode = GPIO_MODE_INPUT;
pull_up_down = GPIO_PUPD_PULLUP;
pull_up_down = GPIO_PUPD_PULLUP;
break;
case PIN_MODE_INPUT_PULLDOWN:
/* input setting: pull down. */
pin_mode = GPIO_MODE_INPUT;
pull_up_down = GPIO_PUPD_PULLDOWN;
pin_mode = GPIO_MODE_INPUT;
pull_up_down = GPIO_PUPD_PULLDOWN;
break;
default:
break;
}
gpio_mode_set(index->gpio_periph, pin_mode, pull_up_down, index->pin);
gpio_mode_set(index->gpio_periph, pin_mode, pull_up_down, index->pin);
gpio_output_options_set(index->gpio_periph, otype, GPIO_OSPEED_50MHZ, index->pin);
}
void gd32_pin_write(rt_device_t dev, rt_base_t pin, rt_base_t value)
@ -333,7 +333,7 @@ rt_err_t gd32_pin_irq_enable(struct rt_device *device, rt_base_t pin, rt_uint32_
return RT_EINVAL;
}
irqmap = &pin_irq_map[hdr_index];
switch (pin_irq_hdr_tab[hdr_index].mode)
{
case PIN_IRQ_MODE_RISING:
@ -354,14 +354,14 @@ rt_err_t gd32_pin_irq_enable(struct rt_device *device, rt_base_t pin, rt_uint32_
/* enable and set interrupt priority */
nvic_irq_enable(irqmap->irqno, 5U);
/* connect EXTI line to GPIO pin */
syscfg_exti_line_config(index->port_src, index->pin_src);
syscfg_exti_line_config(index->port_src, index->pin_src);
/* configure EXTI line */
exti_init((exti_line_enum)(index->pin), EXTI_INTERRUPT, trigger_mode);
exti_interrupt_flag_clear((exti_line_enum)(index->pin));
rt_hw_interrupt_enable(level);
}
else if (enabled == PIN_IRQ_DISABLE)
@ -396,7 +396,7 @@ int rt_hw_pin_init(void)
int result;
result = rt_device_pin_register("pin", &_gd32_pin_ops, RT_NULL);
return result;
}
INIT_BOARD_EXPORT(rt_hw_pin_init);
@ -415,7 +415,7 @@ void GD32_GPIO_EXTI_IRQHandler(rt_int8_t exti_line)
{
pin_irq_hdr(exti_line);
exti_interrupt_flag_clear((exti_line_enum)(1 << exti_line));
}
}
}
void EXTI0_IRQHandler(void)
{

2
bsp/gd32e230k-start/drivers/drv_gpio.h
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2019, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*

10
bsp/gd32e230k-start/drivers/drv_i2c.c
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2019, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
@ -155,7 +155,7 @@ static int gd32_i2c_read(rt_uint32_t i2c_periph, rt_uint16_t slave_address, rt_u
*p_buffer = i2c_data_receive(i2c_periph);
/* point to the next location where the byte read will be saved */
p_buffer++;
p_buffer++;
/* decrement the read bytes counter */
data_byte--;
@ -264,7 +264,7 @@ static rt_size_t gd32_i2c_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg
}
}
}
ret = i;
out:
@ -274,7 +274,7 @@ out:
}
static const struct rt_i2c_bus_device_ops i2c_ops =
{
{
gd32_i2c_xfer,
RT_NULL,
RT_NULL
@ -311,7 +311,7 @@ int rt_hw_i2c_init(void)
i2c_device.priv = (void *)&_i2c_bit_ops;
rt_i2c_bit_add_bus(&i2c_device, I2C_BUS_NAME);
}
}
#else /* register hardware I2C */

2
bsp/gd32e230k-start/drivers/drv_i2c.h
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2019, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*

12
bsp/gd32e230k-start/drivers/drv_spi.c
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2019, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
@ -115,7 +115,7 @@ static rt_err_t configure(struct rt_spi_device* device, struct rt_spi_configurat
spi_init_struct.prescale = SPI_PSC_256;
}
} /* baudrate */
switch(configuration->mode & RT_SPI_MODE_3)
{
case RT_SPI_MODE_0:
@ -131,7 +131,7 @@ static rt_err_t configure(struct rt_spi_device* device, struct rt_spi_configurat
spi_init_struct.clock_polarity_phase = SPI_CK_PL_HIGH_PH_2EDGE;
break;
}
/* MSB or LSB */
if(configuration->mode & RT_SPI_MSB)
{
@ -141,7 +141,7 @@ static rt_err_t configure(struct rt_spi_device* device, struct rt_spi_configurat
{
spi_init_struct.endian = SPI_ENDIAN_LSB;
}
spi_init_struct.trans_mode = SPI_TRANSMODE_FULLDUPLEX;
spi_init_struct.device_mode = SPI_MASTER;
spi_init_struct.nss = SPI_NSS_SOFT;
@ -177,7 +177,7 @@ static rt_uint32_t xfer(struct rt_spi_device* device, struct rt_spi_message* mes
const rt_uint8_t * send_ptr = message->send_buf;
rt_uint8_t * recv_ptr = message->recv_buf;
rt_uint32_t size = message->length;
DEBUG_PRINTF("spi poll transfer start: %d\n", size);
while(size--)
@ -188,7 +188,7 @@ static rt_uint32_t xfer(struct rt_spi_device* device, struct rt_spi_message* mes
{
data = *send_ptr++;
}
// Todo: replace register read/write by gd32f3 lib
//Wait until the transmit buffer is empty
while(RESET == spi_i2s_flag_get(spi_periph, SPI_FLAG_TBE));

2
bsp/gd32e230k-start/drivers/drv_spi.h
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2019, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*

18
bsp/gd32e230k-start/drivers/drv_usart.c
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2019, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
@ -41,7 +41,7 @@ struct gd32_uart
uint16_t tx_pin;
uint32_t rx_port;
uint32_t rx_af;
uint16_t rx_pin;
uint16_t rx_pin;
struct rt_serial_device * serial;
char *device_name;
@ -93,7 +93,7 @@ static const struct gd32_uart uarts[] = {
"uart0",
},
#endif
#ifdef RT_USING_USART1
{
USART1, // uart peripheral index
@ -122,18 +122,18 @@ void gd32_uart_gpio_init(struct gd32_uart *uart)
/* enable USART clock */
rcu_periph_clock_enable(uart->tx_gpio_clk);
rcu_periph_clock_enable(uart->rx_gpio_clk);
rcu_periph_clock_enable(uart->per_clk);
rcu_periph_clock_enable(uart->per_clk);
/* connect port to USARTx_Tx */
gpio_af_set(uart->tx_port, uart->tx_af, uart->tx_pin);
gpio_mode_set(uart->tx_port, GPIO_MODE_AF, GPIO_PUPD_NONE, uart->tx_pin);
gpio_output_options_set(uart->tx_port, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, uart->tx_pin);
/* connect port to USARTx_Rx */
gpio_af_set(uart->rx_port, uart->rx_af, uart->rx_pin);
gpio_mode_set(uart->rx_port, GPIO_MODE_AF, GPIO_PUPD_NONE, uart->rx_pin);
gpio_output_options_set(uart->rx_port, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, uart->rx_pin);
NVIC_SetPriority(uart->irqn, 0);
NVIC_EnableIRQ(uart->irqn);
}
@ -146,9 +146,9 @@ static rt_err_t gd32_configure(struct rt_serial_device *serial, struct serial_co
RT_ASSERT(cfg != RT_NULL);
uart = (struct gd32_uart *)serial->parent.user_data;
gd32_uart_gpio_init(uart);
usart_baudrate_set(uart->uart_periph, cfg->baud_rate);
switch (cfg->data_bits)
@ -228,7 +228,7 @@ static int gd32_putc(struct rt_serial_device *serial, char ch)
usart_data_transmit(uart->uart_periph, ch);
while((usart_flag_get(uart->uart_periph, USART_FLAG_TC) == RESET));
return 1;
}

2
bsp/gd32e230k-start/drivers/drv_usart.h
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2019, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*

32
bsp/gd32e230k-start/drivers/gd32e230_libopt.h
View File

@ -1,7 +1,7 @@
/*!
\file gd32e230_libopt.h
\brief library optional for gd32e230
\version 2018-06-19, V1.0.0, firmware for GD32E230
*/
@ -10,27 +10,27 @@
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/

2
bsp/gd32vf103v-eval/applications/main.c
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*

2
bsp/gd32vf103v-eval/board/board.c
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*

2
bsp/gd32vf103v-eval/board/board.h
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*

30
bsp/gd32vf103v-eval/board/gd32vf103_libopt.h
View File

@ -8,27 +8,27 @@
/*
Copyright (c) 2019, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/

12
bsp/gd32vf103v-eval/drivers/drv_gpio.c
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
@ -15,7 +15,7 @@
#define EXTI_(x) BIT(x)
static const struct pin_index pins[] =
static const struct pin_index pins[] =
{
#if defined(GPIOA)
__GD32VF_PIN(0 , A, 0 ),
@ -126,7 +126,7 @@ static const struct pin_irq_map pin_irq_map[] =
{GPIO_PIN_12, EXTI10_15_IRQn},
{GPIO_PIN_13, EXTI10_15_IRQn},
{GPIO_PIN_14, EXTI10_15_IRQn},
{GPIO_PIN_15, EXTI10_15_IRQn},
{GPIO_PIN_15, EXTI10_15_IRQn},
};
static struct rt_pin_irq_hdr pin_irq_hdr_tab[] =
@ -406,11 +406,11 @@ static rt_err_t gd32vf_pin_irq_enable(struct rt_device *device, rt_base_t pin,
gpio_bit_reset(index->gpio_periph, index->pin);
pin_irq_enable_mask &= ~irqmap->pinbit;
eclic_irq_disable(irqmap->irqno);
exti_interrupt_flag_clear(EXTI_(index->pin));
rt_hw_interrupt_enable(level);
rt_hw_interrupt_enable(level);
}
else
{

4
bsp/gd32vf103v-eval/drivers/drv_gpio.h
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
@ -38,4 +38,4 @@ int rt_hw_gpio_init(void);
#endif /* __DRV_GPIO__H__ */
/******************* end of file *******************/
/******************* end of file *******************/

4
bsp/gd32vf103v-eval/drivers/drv_usart.c
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
@ -15,7 +15,7 @@
#if !defined(BSP_USING_UART0) && !defined(BSP_USING_UART1) && !defined(BSP_USING_UART2) \
&& !defined(BSP_USING_UART3) && !defined(BSP_USING_UART4) && !defined(BSP_USING_UART5)
#error "Please define at least one BSP_USING_UARTx"
/* this driver can be disabled at menuconfig ¡ú RT-Thread Components ¡ú Device Drivers */
/* this driver can be disabled at menuconfig → RT-Thread Components → Device Drivers */
#endif
struct gd32_usart {