!47 安富莱V5开发板BSP
Merge pull request !47 from Dozingfiretruck/gitee_master
This commit is contained in:
bernard
Gitee
commit
2b8ed5704c
|
|
@ -0,0 +1,351 @@
|
|||
#
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# RT-Thread Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# RT-Thread Kernel
|
||||
#
|
||||
CONFIG_RT_NAME_MAX=8
|
||||
# CONFIG_RT_USING_SMP is not set
|
||||
CONFIG_RT_ALIGN_SIZE=4
|
||||
# CONFIG_RT_THREAD_PRIORITY_8 is not set
|
||||
CONFIG_RT_THREAD_PRIORITY_32=y
|
||||
# CONFIG_RT_THREAD_PRIORITY_256 is not set
|
||||
CONFIG_RT_THREAD_PRIORITY_MAX=32
|
||||
CONFIG_RT_TICK_PER_SECOND=1000
|
||||
CONFIG_RT_USING_OVERFLOW_CHECK=y
|
||||
CONFIG_RT_USING_HOOK=y
|
||||
CONFIG_RT_USING_IDLE_HOOK=y
|
||||
CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
|
||||
CONFIG_IDLE_THREAD_STACK_SIZE=256
|
||||
# CONFIG_RT_USING_TIMER_SOFT is not set
|
||||
CONFIG_RT_DEBUG=y
|
||||
CONFIG_RT_DEBUG_COLOR=y
|
||||
# CONFIG_RT_DEBUG_INIT_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_IPC_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_MEM_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
|
||||
|
||||
#
|
||||
# Inter-Thread communication
|
||||
#
|
||||
CONFIG_RT_USING_SEMAPHORE=y
|
||||
CONFIG_RT_USING_MUTEX=y
|
||||
CONFIG_RT_USING_EVENT=y
|
||||
CONFIG_RT_USING_MAILBOX=y
|
||||
CONFIG_RT_USING_MESSAGEQUEUE=y
|
||||
# CONFIG_RT_USING_SIGNALS is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
CONFIG_RT_USING_MEMPOOL=y
|
||||
# CONFIG_RT_USING_MEMHEAP is not set
|
||||
# CONFIG_RT_USING_NOHEAP is not set
|
||||
CONFIG_RT_USING_SMALL_MEM=y
|
||||
# CONFIG_RT_USING_SLAB is not set
|
||||
# CONFIG_RT_USING_MEMTRACE is not set
|
||||
CONFIG_RT_USING_HEAP=y
|
||||
|
||||
#
|
||||
# Kernel Device Object
|
||||
#
|
||||
CONFIG_RT_USING_DEVICE=y
|
||||
# CONFIG_RT_USING_DEVICE_OPS is not set
|
||||
# CONFIG_RT_USING_INTERRUPT_INFO is not set
|
||||
CONFIG_RT_USING_CONSOLE=y
|
||||
CONFIG_RT_CONSOLEBUF_SIZE=128
|
||||
CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
|
||||
CONFIG_RT_VER_NUM=0x40000
|
||||
CONFIG_ARCH_ARM=y
|
||||
CONFIG_ARCH_ARM_CORTEX_M=y
|
||||
CONFIG_ARCH_ARM_CORTEX_M4=y
|
||||
# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
|
||||
|
||||
#
|
||||
# RT-Thread Components
|
||||
#
|
||||
CONFIG_RT_USING_COMPONENTS_INIT=y
|
||||
CONFIG_RT_USING_USER_MAIN=y
|
||||
CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
|
||||
CONFIG_RT_MAIN_THREAD_PRIORITY=10
|
||||
|
||||
#
|
||||
# C++ features
|
||||
#
|
||||
# CONFIG_RT_USING_CPLUSPLUS is not set
|
||||
|
||||
#
|
||||
# Command shell
|
||||
#
|
||||
CONFIG_RT_USING_FINSH=y
|
||||
CONFIG_FINSH_THREAD_NAME="tshell"
|
||||
CONFIG_FINSH_USING_HISTORY=y
|
||||
CONFIG_FINSH_HISTORY_LINES=5
|
||||
CONFIG_FINSH_USING_SYMTAB=y
|
||||
CONFIG_FINSH_USING_DESCRIPTION=y
|
||||
# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
|
||||
CONFIG_FINSH_THREAD_PRIORITY=20
|
||||
CONFIG_FINSH_THREAD_STACK_SIZE=4096
|
||||
CONFIG_FINSH_CMD_SIZE=80
|
||||
# CONFIG_FINSH_USING_AUTH is not set
|
||||
CONFIG_FINSH_USING_MSH=y
|
||||
CONFIG_FINSH_USING_MSH_DEFAULT=y
|
||||
CONFIG_FINSH_USING_MSH_ONLY=y
|
||||
CONFIG_FINSH_ARG_MAX=10
|
||||
|
||||
#
|
||||
# Device virtual file system
|
||||
#
|
||||
# CONFIG_RT_USING_DFS is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_RT_USING_DEVICE_IPC=y
|
||||
CONFIG_RT_PIPE_BUFSZ=512
|
||||
CONFIG_RT_USING_SERIAL=y
|
||||
CONFIG_RT_SERIAL_USING_DMA=y
|
||||
# CONFIG_RT_USING_CAN is not set
|
||||
# CONFIG_RT_USING_HWTIMER is not set
|
||||
# CONFIG_RT_USING_CPUTIME is not set
|
||||
# CONFIG_RT_USING_I2C is not set
|
||||
CONFIG_RT_USING_PIN=y
|
||||
# CONFIG_RT_USING_ADC is not set
|
||||
# CONFIG_RT_USING_PWM is not set
|
||||
# CONFIG_RT_USING_MTD_NOR is not set
|
||||
# CONFIG_RT_USING_MTD_NAND is not set
|
||||
# CONFIG_RT_USING_MTD is not set
|
||||
# CONFIG_RT_USING_PM is not set
|
||||
# CONFIG_RT_USING_RTC is not set
|
||||
# CONFIG_RT_USING_SDIO is not set
|
||||
# CONFIG_RT_USING_SPI is not set
|
||||
# CONFIG_RT_USING_WDT is not set
|
||||
# CONFIG_RT_USING_AUDIO is not set
|
||||
|
||||
#
|
||||
# Using WiFi
|
||||
#
|
||||
# CONFIG_RT_USING_WIFI is not set
|
||||
|
||||
#
|
||||
# Using USB
|
||||
#
|
||||
# CONFIG_RT_USING_USB_HOST is not set
|
||||
# CONFIG_RT_USING_USB_DEVICE is not set
|
||||
|
||||
#
|
||||
# POSIX layer and C standard library
|
||||
#
|
||||
# CONFIG_RT_USING_LIBC is not set
|
||||
# CONFIG_RT_USING_PTHREADS is not set
|
||||
|
||||
#
|
||||
# Network
|
||||
#
|
||||
|
||||
#
|
||||
# Socket abstraction layer
|
||||
#
|
||||
# CONFIG_RT_USING_SAL is not set
|
||||
|
||||
#
|
||||
# light weight TCP/IP stack
|
||||
#
|
||||
# CONFIG_RT_USING_LWIP is not set
|
||||
|
||||
#
|
||||
# Modbus master and slave stack
|
||||
#
|
||||
# CONFIG_RT_USING_MODBUS is not set
|
||||
|
||||
#
|
||||
# AT commands
|
||||
#
|
||||
# CONFIG_RT_USING_AT is not set
|
||||
|
||||
#
|
||||
# VBUS(Virtual Software BUS)
|
||||
#
|
||||
# CONFIG_RT_USING_VBUS is not set
|
||||
|
||||
#
|
||||
# Utilities
|
||||
#
|
||||
# CONFIG_RT_USING_LOGTRACE is not set
|
||||
# CONFIG_RT_USING_RYM is not set
|
||||
# CONFIG_RT_USING_ULOG is not set
|
||||
# CONFIG_RT_USING_UTEST is not set
|
||||
|
||||
#
|
||||
# ARM CMSIS
|
||||
#
|
||||
# CONFIG_RT_USING_CMSIS_OS is not set
|
||||
# CONFIG_RT_USING_RTT_CMSIS is not set
|
||||
# CONFIG_RT_USING_LWP is not set
|
||||
|
||||
#
|
||||
# RT-Thread online packages
|
||||
#
|
||||
|
||||
#
|
||||
# IoT - internet of things
|
||||
#
|
||||
# CONFIG_PKG_USING_PAHOMQTT is not set
|
||||
# CONFIG_PKG_USING_WEBCLIENT is not set
|
||||
# CONFIG_PKG_USING_WEBNET is not set
|
||||
# CONFIG_PKG_USING_MONGOOSE is not set
|
||||
# CONFIG_PKG_USING_WEBTERMINAL is not set
|
||||
# CONFIG_PKG_USING_CJSON is not set
|
||||
# CONFIG_PKG_USING_JSMN is not set
|
||||
# CONFIG_PKG_USING_LJSON is not set
|
||||
# CONFIG_PKG_USING_EZXML is not set
|
||||
# CONFIG_PKG_USING_NANOPB is not set
|
||||
|
||||
#
|
||||
# Wi-Fi
|
||||
#
|
||||
|
||||
#
|
||||
# Marvell WiFi
|
||||
#
|
||||
# CONFIG_PKG_USING_WLANMARVELL is not set
|
||||
|
||||
#
|
||||
# Wiced WiFi
|
||||
#
|
||||
# CONFIG_PKG_USING_WLAN_WICED is not set
|
||||
# CONFIG_PKG_USING_COAP is not set
|
||||
# CONFIG_PKG_USING_NOPOLL is not set
|
||||
# CONFIG_PKG_USING_NETUTILS is not set
|
||||
# CONFIG_PKG_USING_AT_DEVICE is not set
|
||||
# CONFIG_PKG_USING_WIZNET is not set
|
||||
|
||||
#
|
||||
# IoT Cloud
|
||||
#
|
||||
# CONFIG_PKG_USING_ONENET is not set
|
||||
# CONFIG_PKG_USING_GAGENT_CLOUD is not set
|
||||
# CONFIG_PKG_USING_ALI_IOTKIT is not set
|
||||
# CONFIG_PKG_USING_AZURE is not set
|
||||
# CONFIG_PKG_USING_TENCENT_IOTKIT is not set
|
||||
|
||||
#
|
||||
# security packages
|
||||
#
|
||||
# CONFIG_PKG_USING_MBEDTLS is not set
|
||||
# CONFIG_PKG_USING_libsodium is not set
|
||||
# CONFIG_PKG_USING_TINYCRYPT is not set
|
||||
|
||||
#
|
||||
# language packages
|
||||
#
|
||||
# CONFIG_PKG_USING_LUA is not set
|
||||
# CONFIG_PKG_USING_JERRYSCRIPT is not set
|
||||
# CONFIG_PKG_USING_MICROPYTHON is not set
|
||||
|
||||
#
|
||||
# multimedia packages
|
||||
#
|
||||
# CONFIG_PKG_USING_OPENMV is not set
|
||||
# CONFIG_PKG_USING_MUPDF is not set
|
||||
|
||||
#
|
||||
# tools packages
|
||||
#
|
||||
# CONFIG_PKG_USING_CMBACKTRACE is not set
|
||||
# CONFIG_PKG_USING_EASYFLASH is not set
|
||||
# CONFIG_PKG_USING_EASYLOGGER is not set
|
||||
# CONFIG_PKG_USING_SYSTEMVIEW is not set
|
||||
# CONFIG_PKG_USING_RDB is not set
|
||||
# CONFIG_PKG_USING_QRCODE is not set
|
||||
# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
|
||||
|
||||
#
|
||||
# system packages
|
||||
#
|
||||
# CONFIG_PKG_USING_GUIENGINE is not set
|
||||
# CONFIG_PKG_USING_PERSIMMON is not set
|
||||
# CONFIG_PKG_USING_CAIRO is not set
|
||||
# CONFIG_PKG_USING_PIXMAN is not set
|
||||
# CONFIG_PKG_USING_LWEXT4 is not set
|
||||
# CONFIG_PKG_USING_PARTITION is not set
|
||||
# CONFIG_PKG_USING_FAL is not set
|
||||
# CONFIG_PKG_USING_SQLITE is not set
|
||||
# CONFIG_PKG_USING_RTI is not set
|
||||
# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
|
||||
# CONFIG_PKG_USING_CMSIS is not set
|
||||
# CONFIG_PKG_USING_DFS_YAFFS is not set
|
||||
# CONFIG_PKG_USING_LITTLEFS is not set
|
||||
|
||||
#
|
||||
# peripheral libraries and drivers
|
||||
#
|
||||
# CONFIG_PKG_USING_REALTEK_AMEBA is not set
|
||||
# CONFIG_PKG_USING_SHT2X is not set
|
||||
# CONFIG_PKG_USING_AHT10 is not set
|
||||
# CONFIG_PKG_USING_AP3216C is not set
|
||||
# CONFIG_PKG_USING_STM32_SDIO is not set
|
||||
# CONFIG_PKG_USING_ICM20608 is not set
|
||||
# CONFIG_PKG_USING_U8G2 is not set
|
||||
# CONFIG_PKG_USING_BUTTON is not set
|
||||
# CONFIG_PKG_USING_MPU6XXX is not set
|
||||
# CONFIG_PKG_USING_PCF8574 is not set
|
||||
# CONFIG_PKG_USING_KENDRYTE_SDK is not set
|
||||
|
||||
#
|
||||
# miscellaneous packages
|
||||
#
|
||||
# CONFIG_PKG_USING_LIBCSV is not set
|
||||
# CONFIG_PKG_USING_OPTPARSE is not set
|
||||
# CONFIG_PKG_USING_FASTLZ is not set
|
||||
# CONFIG_PKG_USING_MINILZO is not set
|
||||
# CONFIG_PKG_USING_QUICKLZ is not set
|
||||
# CONFIG_PKG_USING_MULTIBUTTON is not set
|
||||
# CONFIG_PKG_USING_CANFESTIVAL is not set
|
||||
# CONFIG_PKG_USING_ZLIB is not set
|
||||
# CONFIG_PKG_USING_DSTR is not set
|
||||
# CONFIG_PKG_USING_TINYFRAME is not set
|
||||
# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
|
||||
|
||||
#
|
||||
# samples: kernel and components samples
|
||||
#
|
||||
# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
|
||||
# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
|
||||
# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
|
||||
# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
|
||||
# CONFIG_PKG_USING_HELLO is not set
|
||||
# CONFIG_PKG_USING_VI is not set
|
||||
CONFIG_SOC_FAMILY_STM32=y
|
||||
CONFIG_SOC_SERIES_STM32F4=y
|
||||
|
||||
#
|
||||
# Hardware Drivers Config
|
||||
#
|
||||
CONFIG_SOC_STM32F407ZG=y
|
||||
|
||||
#
|
||||
# Onboard Peripheral Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# On-chip Peripheral Drivers
|
||||
#
|
||||
CONFIG_BSP_USING_GPIO=y
|
||||
CONFIG_BSP_USING_UART=y
|
||||
CONFIG_BSP_USING_UART1=y
|
||||
# CONFIG_BSP_UART1_RX_USING_DMA is not set
|
||||
# CONFIG_BSP_USING_SPI is not set
|
||||
# CONFIG_BSP_USING_I2C1 is not set
|
||||
|
||||
#
|
||||
# Board extended module Drivers
|
||||
#
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
*.pyc
|
||||
*.map
|
||||
*.dblite
|
||||
*.elf
|
||||
*.bin
|
||||
*.hex
|
||||
*.axf
|
||||
*.exe
|
||||
*.pdb
|
||||
*.idb
|
||||
*.ilk
|
||||
*.old
|
||||
build
|
||||
Debug
|
||||
documentation/html
|
||||
packages/
|
||||
*~
|
||||
*.o
|
||||
*.obj
|
||||
*.out
|
||||
*.bak
|
||||
*.dep
|
||||
*.lib
|
||||
*.i
|
||||
*.d
|
||||
.DS_Stor*
|
||||
.config 3
|
||||
.config 4
|
||||
.config 5
|
||||
Midea-X1
|
||||
*.uimg
|
||||
GPATH
|
||||
GRTAGS
|
||||
GTAGS
|
||||
.vscode
|
||||
JLinkLog.txt
|
||||
JLinkSettings.ini
|
||||
DebugConfig/
|
||||
RTE/
|
||||
settings/
|
||||
*.uvguix*
|
||||
cconfig.h
|
||||
|
|
@ -0,0 +1,21 @@
|
|||
mainmenu "RT-Thread Configuration"
|
||||
|
||||
config BSP_DIR
|
||||
string
|
||||
option env="BSP_ROOT"
|
||||
default "."
|
||||
|
||||
config RTT_DIR
|
||||
string
|
||||
option env="RTT_ROOT"
|
||||
default "../../.."
|
||||
|
||||
config PKGS_DIR
|
||||
string
|
||||
option env="PKGS_ROOT"
|
||||
default "packages"
|
||||
|
||||
source "$RTT_DIR/Kconfig"
|
||||
source "$PKGS_DIR/Kconfig"
|
||||
source "../libraries/Kconfig"
|
||||
source "board/Kconfig"
|
||||
|
|
@ -0,0 +1,125 @@
|
|||
# STM32F429 armfly-v5 开发板 BSP 说明
|
||||
|
||||
## 简介
|
||||
|
||||
本文档为 STM32F429 armfly-v5 开发板的 BSP (板级支持包) 说明。
|
||||
|
||||
主要内容如下：
|
||||
|
||||
- 开发板资源介绍
|
||||
- BSP 快速上手
|
||||
- 进阶使用方法
|
||||
|
||||
通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。
|
||||
|
||||
## 开发板介绍
|
||||
|
||||
armfly-v5 STM32F407 是安富莱推出的一款基于 ARM Cortex-M4 内核的开发板，最高主频为 168Mhz，该开发板具有丰富的板载资源，可以充分发挥 STM32F407 的芯片性能。
|
||||
|
||||
开发板外观如下图所示：
|
||||
|
||||
|
||||
|
||||
该开发板常用 **板载资源** 如下：
|
||||
|
||||
- MCU：STM32F407IGT6，主频 168MHz，1024KB FLASH ，196KB RAM
|
||||
- 外部 RAM：IS61WV102416BLL-10TL（SRAM，20MB，16bit）
|
||||
- 外部 FLASH：W25Q64BVSSIG（SPI，8MB）、HY27UF081G2A（NAND，128MB）
|
||||
- 常用外设
|
||||
- LED：4个， LED1 - LED4
|
||||
- 按键：4个，k1（PI8），K2（PC13），k3（PI11），五向摇杆
|
||||
- 常用接口：USB 转串口、SD 卡接口、以太网接口、LCD 接口
|
||||
- 调试接口，SWD
|
||||
|
||||
开发板更多详细信息请参考【安富莱】 [STM32 v5开发板介绍](http://www.armbbs.cn/forum.php?mod=viewthread&tid=1285)。
|
||||
|
||||
## 外设支持
|
||||
|
||||
本 BSP 目前对外设的支持情况如下：
|
||||
|
||||
| **板载外设** | **支持情况** | **备注** |
|
||||
| :----------------- | :----------: | :------------------------------------- |
|
||||
| USB 转串口 | 支持 | UART1/2 |
|
||||
| SPI Flash | 支持 | W25Q64BVSSIG 8M FLASH SPI3 |
|
||||
| MPU6050 | 支持 | 软件 I2C2 |
|
||||
| SD卡 | 支持 | |
|
||||
| CAN | 暂不支持 | |
|
||||
| **片上外设** | **支持情况** | **备注** |
|
||||
| GPIO | 支持 | PA0, PA1... PK15 ---> PIN: 0, 1...176 |
|
||||
| UART | 支持 | UART1 |
|
||||
| SPI | 支持 | SPI3 |
|
||||
| I2C | 支持 | 软件 I2C2 |
|
||||
| ADC | 支持 | |
|
||||
| RTC | 支持 | 支持外部晶振和内部低速时钟 |
|
||||
| WDT | 支持 | |
|
||||
| FLASH | 支持 | 已适配 [FAL](https://github.com/RT-Thread-packages/fal) |
|
||||
| SDIO | 支持 | |
|
||||
| PWM | 支持 | |
|
||||
| USB Device | 暂不支持 | 即将支持 |
|
||||
| USB Host | 暂不支持 | 即将支持 |
|
||||
| **扩展模块** | **支持情况** | **备注** |
|
||||
| ad7606 | 暂不支持 | |
|
||||
|
||||
## 使用说明
|
||||
|
||||
使用说明分为如下两个章节：
|
||||
|
||||
- 快速上手
|
||||
|
||||
本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。
|
||||
|
||||
- 进阶使用
|
||||
|
||||
本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。
|
||||
|
||||
|
||||
### 快速上手
|
||||
|
||||
本 BSP 为开发者提供 MDK4、MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。
|
||||
|
||||
#### 硬件连接
|
||||
|
||||
使用数据线连接开发板到 PC，打开电源开关。
|
||||
|
||||
#### 编译下载
|
||||
|
||||
双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。
|
||||
|
||||
> 工程默认配置使用 STLink 仿真器下载程序，在通过 STLink 连接开发板的基础上，点击下载按钮即可下载程序到开发板
|
||||
|
||||
#### 运行结果
|
||||
|
||||
下载程序成功之后，系统会自动运行，【这里写开发板运行起来之后的现象，如：LED 闪烁等】。
|
||||
|
||||
连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息:
|
||||
|
||||
```bash
|
||||
\ | /
|
||||
- RT - Thread Operating System
|
||||
/ | \ 4.0.2 build Jul 13 2020
|
||||
2006 - 2019 Copyright by rt-thread team
|
||||
msh >
|
||||
```
|
||||
### 进阶使用
|
||||
|
||||
此 BSP 默认只开启了 GPIO 和 串口1 的功能，如果需使用 SD 卡、Flash 等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
|
||||
|
||||
1. 在 bsp 下打开 env 工具。
|
||||
|
||||
2. 输入`menuconfig`命令配置工程，配置好之后保存退出。
|
||||
|
||||
3. 输入`pkgs --update`命令更新软件包。
|
||||
|
||||
4. 输入`scons --target=mdk4/mdk5/iar` 命令重新生成工程。
|
||||
|
||||
本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。
|
||||
|
||||
## 注意事项
|
||||
|
||||
- 暂无
|
||||
|
||||
## 联系人信息
|
||||
|
||||
维护人:
|
||||
|
||||
- [Dozingfiretruck](https://gitee.com/Dozingfiretruck), 邮箱：<dozingfiretruck@qq.com>
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
# for module compiling
|
||||
import os
|
||||
Import('RTT_ROOT')
|
||||
from building import *
|
||||
|
||||
cwd = GetCurrentDir()
|
||||
objs = []
|
||||
list = os.listdir(cwd)
|
||||
|
||||
for d in list:
|
||||
path = os.path.join(cwd, d)
|
||||
if os.path.isfile(os.path.join(path, 'SConscript')):
|
||||
objs = objs + SConscript(os.path.join(d, 'SConscript'))
|
||||
|
||||
Return('objs')
|
||||
|
|
@ -0,0 +1,60 @@
|
|||
import os
|
||||
import sys
|
||||
import rtconfig
|
||||
|
||||
if os.getenv('RTT_ROOT'):
|
||||
RTT_ROOT = os.getenv('RTT_ROOT')
|
||||
else:
|
||||
RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..')
|
||||
|
||||
sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
|
||||
try:
|
||||
from building import *
|
||||
except:
|
||||
print('Cannot found RT-Thread root directory, please check RTT_ROOT')
|
||||
print(RTT_ROOT)
|
||||
exit(-1)
|
||||
|
||||
TARGET = 'rt-thread.' + rtconfig.TARGET_EXT
|
||||
|
||||
DefaultEnvironment(tools=[])
|
||||
env = Environment(tools = ['mingw'],
|
||||
AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
|
||||
CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
|
||||
AR = rtconfig.AR, ARFLAGS = '-rc',
|
||||
CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
|
||||
LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
|
||||
env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
|
||||
|
||||
if rtconfig.PLATFORM == 'iar':
|
||||
env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
|
||||
env.Replace(ARFLAGS = [''])
|
||||
env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map')
|
||||
|
||||
Export('RTT_ROOT')
|
||||
Export('rtconfig')
|
||||
|
||||
SDK_ROOT = os.path.abspath('./')
|
||||
|
||||
if os.path.exists(SDK_ROOT + '/libraries'):
|
||||
libraries_path_prefix = SDK_ROOT + '/libraries'
|
||||
else:
|
||||
libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries'
|
||||
|
||||
SDK_LIB = libraries_path_prefix
|
||||
Export('SDK_LIB')
|
||||
|
||||
# prepare building environment
|
||||
objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
|
||||
|
||||
stm32_library = 'STM32F4xx_HAL'
|
||||
rtconfig.BSP_LIBRARY_TYPE = stm32_library
|
||||
|
||||
# include libraries
|
||||
objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript')))
|
||||
|
||||
# include drivers
|
||||
objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript')))
|
||||
|
||||
# make a building
|
||||
DoBuilding(TARGET, objs)
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
import rtconfig
|
||||
from building import *
|
||||
|
||||
cwd = GetCurrentDir()
|
||||
CPPPATH = [cwd, str(Dir('#'))]
|
||||
src = Split("""
|
||||
main.c
|
||||
""")
|
||||
|
||||
group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
|
||||
|
||||
Return('group')
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
/*
|
||||
* Copyright (c) 2006-2018, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2020-07-13 Dozingfiretruck first version
|
||||
*/
|
||||
|
||||
#include <rtthread.h>
|
||||
#include <rtdevice.h>
|
||||
#include <board.h>
|
||||
|
||||
/* defined the LED4 pin: PC2 */
|
||||
#define LED0_PIN GET_PIN(C, 2)
|
||||
|
||||
int main(void)
|
||||
{
|
||||
int count = 1;
|
||||
/* set LED0 pin mode to output */
|
||||
rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT);
|
||||
|
||||
while (count++)
|
||||
{
|
||||
rt_pin_write(LED0_PIN, PIN_HIGH);
|
||||
rt_thread_mdelay(500);
|
||||
rt_pin_write(LED0_PIN, PIN_LOW);
|
||||
rt_thread_mdelay(500);
|
||||
}
|
||||
|
||||
return RT_EOK;
|
||||
}
|
||||
File diff suppressed because one or more lines are too long
|
|
@ -0,0 +1,234 @@
|
|||
#MicroXplorer Configuration settings - do not modify
|
||||
ADC1.Channel-3\#ChannelRegularConversion=ADC_CHANNEL_9
|
||||
ADC1.IPParameters=Rank-3\#ChannelRegularConversion,master,Channel-3\#ChannelRegularConversion,SamplingTime-3\#ChannelRegularConversion,NbrOfConversionFlag
|
||||
ADC1.NbrOfConversionFlag=1
|
||||
ADC1.Rank-3\#ChannelRegularConversion=1
|
||||
ADC1.SamplingTime-3\#ChannelRegularConversion=ADC_SAMPLETIME_3CYCLES
|
||||
ADC1.master=1
|
||||
File.Version=6
|
||||
GPIO.groupedBy=Group By Peripherals
|
||||
I2S2.ErrorAudioFreq=-0.27 %
|
||||
I2S2.FullDuplexMode=I2S_FULLDUPLEXMODE_ENABLE
|
||||
I2S2.IPParameters=Instance,VirtualMode,FullDuplexMode,RealAudioFreq,ErrorAudioFreq
|
||||
I2S2.Instance=SPI$Index
|
||||
I2S2.RealAudioFreq=7.978 KHz
|
||||
I2S2.VirtualMode=I2S_MODE_MASTER
|
||||
KeepUserPlacement=false
|
||||
Mcu.Family=STM32F4
|
||||
Mcu.IP0=ADC1
|
||||
Mcu.IP1=I2S2
|
||||
Mcu.IP10=TIM10
|
||||
Mcu.IP11=TIM11
|
||||
Mcu.IP12=TIM13
|
||||
Mcu.IP13=TIM14
|
||||
Mcu.IP14=USART1
|
||||
Mcu.IP15=USART2
|
||||
Mcu.IP2=IWDG
|
||||
Mcu.IP3=NVIC
|
||||
Mcu.IP4=RCC
|
||||
Mcu.IP5=RNG
|
||||
Mcu.IP6=RTC
|
||||
Mcu.IP7=SDIO
|
||||
Mcu.IP8=SPI3
|
||||
Mcu.IP9=SYS
|
||||
Mcu.IPNb=16
|
||||
Mcu.Name=STM32F407I(E-G)Tx
|
||||
Mcu.Package=LQFP176
|
||||
Mcu.Pin0=PC14-OSC32_IN
|
||||
Mcu.Pin1=PC15-OSC32_OUT
|
||||
Mcu.Pin10=PB15
|
||||
Mcu.Pin11=PC6
|
||||
Mcu.Pin12=PC8
|
||||
Mcu.Pin13=PC9
|
||||
Mcu.Pin14=PA9
|
||||
Mcu.Pin15=PA10
|
||||
Mcu.Pin16=PA13
|
||||
Mcu.Pin17=PI2
|
||||
Mcu.Pin18=PA14
|
||||
Mcu.Pin19=PC10
|
||||
Mcu.Pin2=PF6
|
||||
Mcu.Pin20=PC11
|
||||
Mcu.Pin21=PC12
|
||||
Mcu.Pin22=PD2
|
||||
Mcu.Pin23=PB3
|
||||
Mcu.Pin24=PB4
|
||||
Mcu.Pin25=PB5
|
||||
Mcu.Pin26=VP_IWDG_VS_IWDG
|
||||
Mcu.Pin27=VP_RNG_VS_RNG
|
||||
Mcu.Pin28=VP_RTC_VS_RTC_Activate
|
||||
Mcu.Pin29=VP_SYS_VS_Systick
|
||||
Mcu.Pin3=PH0-OSC_IN
|
||||
Mcu.Pin30=VP_TIM10_VS_ClockSourceINT
|
||||
Mcu.Pin31=VP_TIM11_VS_ClockSourceINT
|
||||
Mcu.Pin32=VP_TIM13_VS_ClockSourceINT
|
||||
Mcu.Pin33=VP_TIM14_VS_ClockSourceINT
|
||||
Mcu.Pin4=PH1-OSC_OUT
|
||||
Mcu.Pin5=PA2
|
||||
Mcu.Pin6=PA3
|
||||
Mcu.Pin7=PB1
|
||||
Mcu.Pin8=PB12
|
||||
Mcu.Pin9=PB13
|
||||
Mcu.PinsNb=34
|
||||
Mcu.ThirdPartyNb=0
|
||||
Mcu.UserConstants=
|
||||
Mcu.UserName=STM32F407IGTx
|
||||
MxCube.Version=5.6.1
|
||||
MxDb.Version=DB.5.0.60
|
||||
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||
NVIC.ForceEnableDMAVector=true
|
||||
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
|
||||
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
|
||||
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||
PA10.Mode=Asynchronous
|
||||
PA10.Signal=USART1_RX
|
||||
PA13.Mode=Serial_Wire
|
||||
PA13.Signal=SYS_JTMS-SWDIO
|
||||
PA14.Mode=Serial_Wire
|
||||
PA14.Signal=SYS_JTCK-SWCLK
|
||||
PA2.Mode=Asynchronous
|
||||
PA2.Signal=USART2_TX
|
||||
PA3.Mode=Asynchronous
|
||||
PA3.Signal=USART2_RX
|
||||
PA9.Mode=Asynchronous
|
||||
PA9.Signal=USART1_TX
|
||||
PB1.Signal=ADCx_IN9
|
||||
PB12.Mode=Full_Duplex_Master
|
||||
PB12.Signal=I2S2_WS
|
||||
PB13.Locked=true
|
||||
PB13.Mode=Full_Duplex_Master
|
||||
PB13.Signal=I2S2_CK
|
||||
PB15.Mode=Full_Duplex_Master
|
||||
PB15.Signal=I2S2_SD
|
||||
PB3.Mode=Full_Duplex_Master
|
||||
PB3.Signal=SPI3_SCK
|
||||
PB4.Mode=Full_Duplex_Master
|
||||
PB4.Signal=SPI3_MISO
|
||||
PB5.Mode=Full_Duplex_Master
|
||||
PB5.Signal=SPI3_MOSI
|
||||
PC10.Mode=SD_4_bits_Wide_bus
|
||||
PC10.Signal=SDIO_D2
|
||||
PC11.Mode=SD_4_bits_Wide_bus
|
||||
PC11.Signal=SDIO_D3
|
||||
PC12.Mode=SD_4_bits_Wide_bus
|
||||
PC12.Signal=SDIO_CK
|
||||
PC14-OSC32_IN.Mode=LSE-External-Oscillator
|
||||
PC14-OSC32_IN.Signal=RCC_OSC32_IN
|
||||
PC15-OSC32_OUT.Mode=LSE-External-Oscillator
|
||||
PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
|
||||
PC6.Mode=Master_Clock_Activated
|
||||
PC6.Signal=I2S2_MCK
|
||||
PC8.Mode=SD_4_bits_Wide_bus
|
||||
PC8.Signal=SDIO_D0
|
||||
PC9.Mode=SD_4_bits_Wide_bus
|
||||
PC9.Signal=SDIO_D1
|
||||
PD2.Mode=SD_4_bits_Wide_bus
|
||||
PD2.Signal=SDIO_CMD
|
||||
PF6.Signal=S_TIM10_CH1
|
||||
PH0-OSC_IN.Mode=HSE-External-Oscillator
|
||||
PH0-OSC_IN.Signal=RCC_OSC_IN
|
||||
PH1-OSC_OUT.Mode=HSE-External-Oscillator
|
||||
PH1-OSC_OUT.Signal=RCC_OSC_OUT
|
||||
PI2.Locked=true
|
||||
PI2.Mode=Full_Duplex_Master
|
||||
PI2.Signal=I2S2_ext_SD
|
||||
PinOutPanel.RotationAngle=0
|
||||
ProjectManager.AskForMigrate=true
|
||||
ProjectManager.BackupPrevious=false
|
||||
ProjectManager.CompilerOptimize=6
|
||||
ProjectManager.ComputerToolchain=false
|
||||
ProjectManager.CoupleFile=false
|
||||
ProjectManager.CustomerFirmwarePackage=
|
||||
ProjectManager.DefaultFWLocation=true
|
||||
ProjectManager.DeletePrevious=true
|
||||
ProjectManager.DeviceId=STM32F407IGTx
|
||||
ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.25.0
|
||||
ProjectManager.FreePins=false
|
||||
ProjectManager.HalAssertFull=false
|
||||
ProjectManager.HeapSize=0x200
|
||||
ProjectManager.KeepUserCode=true
|
||||
ProjectManager.LastFirmware=true
|
||||
ProjectManager.LibraryCopy=0
|
||||
ProjectManager.MainLocation=Src
|
||||
ProjectManager.NoMain=false
|
||||
ProjectManager.PreviousToolchain=
|
||||
ProjectManager.ProjectBuild=false
|
||||
ProjectManager.ProjectFileName=CubeMX_Config.ioc
|
||||
ProjectManager.ProjectName=CubeMX_Config
|
||||
ProjectManager.StackSize=0x400
|
||||
ProjectManager.TargetToolchain=MDK-ARM V5.27
|
||||
ProjectManager.ToolChainLocation=
|
||||
ProjectManager.UnderRoot=false
|
||||
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_I2S2_Init-I2S2-false-HAL-true,6-MX_IWDG_Init-IWDG-false-HAL-true,7-MX_RTC_Init-RTC-false-HAL-true,8-MX_SDIO_SD_Init-SDIO-false-HAL-true,9-MX_SPI3_Init-SPI3-false-HAL-true,10-MX_TIM10_Init-TIM10-false-HAL-true,11-MX_TIM11_Init-TIM11-false-HAL-true,12-MX_TIM13_Init-TIM13-false-HAL-true,13-MX_TIM14_Init-TIM14-false-HAL-true,14-MX_RNG_Init-RNG-false-HAL-true,15-MX_USART2_UART_Init-USART2-false-HAL-true
|
||||
RCC.48MHZClocksFreq_Value=48000000
|
||||
RCC.AHBFreq_Value=168000000
|
||||
RCC.APB1CLKDivider=RCC_HCLK_DIV4
|
||||
RCC.APB1Freq_Value=42000000
|
||||
RCC.APB1TimFreq_Value=84000000
|
||||
RCC.APB2CLKDivider=RCC_HCLK_DIV2
|
||||
RCC.APB2Freq_Value=84000000
|
||||
RCC.APB2TimFreq_Value=168000000
|
||||
RCC.CortexFreq_Value=168000000
|
||||
RCC.EthernetFreq_Value=168000000
|
||||
RCC.FCLKCortexFreq_Value=168000000
|
||||
RCC.FamilyName=M
|
||||
RCC.HCLKFreq_Value=168000000
|
||||
RCC.HSE_VALUE=25000000
|
||||
RCC.HSI_VALUE=16000000
|
||||
RCC.I2SClocksFreq_Value=96000000
|
||||
RCC.IPParameters=48MHZClocksFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2SClocksFreq_Value,LSI_VALUE,MCO2PinFreq_Value,PLLCLKFreq_Value,PLLM,PLLN,PLLQ,PLLQCLKFreq_Value,PLLSourceVirtual,RCC_RTC_Clock_Source,RCC_RTC_Clock_SourceVirtual,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VcooutputI2S
|
||||
RCC.LSI_VALUE=32000
|
||||
RCC.MCO2PinFreq_Value=168000000
|
||||
RCC.PLLCLKFreq_Value=168000000
|
||||
RCC.PLLM=25
|
||||
RCC.PLLN=336
|
||||
RCC.PLLQ=7
|
||||
RCC.PLLQCLKFreq_Value=48000000
|
||||
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
|
||||
RCC.RCC_RTC_Clock_Source=RCC_RTCCLKSOURCE_LSE
|
||||
RCC.RCC_RTC_Clock_SourceVirtual=RCC_RTCCLKSOURCE_LSE
|
||||
RCC.RTCFreq_Value=32768
|
||||
RCC.RTCHSEDivFreq_Value=12500000
|
||||
RCC.SYSCLKFreq_VALUE=168000000
|
||||
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
|
||||
RCC.VCOI2SOutputFreq_Value=192000000
|
||||
RCC.VCOInputFreq_Value=1000000
|
||||
RCC.VCOOutputFreq_Value=336000000
|
||||
RCC.VcooutputI2S=96000000
|
||||
SH.ADCx_IN9.0=ADC1_IN9,IN9
|
||||
SH.ADCx_IN9.ConfNb=1
|
||||
SH.S_TIM10_CH1.0=TIM10_CH1,PWM Generation1 CH1
|
||||
SH.S_TIM10_CH1.ConfNb=1
|
||||
SPI3.CalculateBaudRate=21.0 MBits/s
|
||||
SPI3.Direction=SPI_DIRECTION_2LINES
|
||||
SPI3.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
|
||||
SPI3.Mode=SPI_MODE_MASTER
|
||||
SPI3.VirtualType=VM_MASTER
|
||||
TIM10.Channel=TIM_CHANNEL_1
|
||||
TIM10.IPParameters=Channel
|
||||
USART1.IPParameters=VirtualMode
|
||||
USART1.VirtualMode=VM_ASYNC
|
||||
USART2.IPParameters=VirtualMode
|
||||
USART2.VirtualMode=VM_ASYNC
|
||||
VP_IWDG_VS_IWDG.Mode=IWDG_Activate
|
||||
VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
|
||||
VP_RNG_VS_RNG.Mode=RNG_Activate
|
||||
VP_RNG_VS_RNG.Signal=RNG_VS_RNG
|
||||
VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
|
||||
VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
|
||||
VP_SYS_VS_Systick.Mode=SysTick
|
||||
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
|
||||
VP_TIM10_VS_ClockSourceINT.Mode=Enable_Timer
|
||||
VP_TIM10_VS_ClockSourceINT.Signal=TIM10_VS_ClockSourceINT
|
||||
VP_TIM11_VS_ClockSourceINT.Mode=Enable_Timer
|
||||
VP_TIM11_VS_ClockSourceINT.Signal=TIM11_VS_ClockSourceINT
|
||||
VP_TIM13_VS_ClockSourceINT.Mode=Enable_Timer
|
||||
VP_TIM13_VS_ClockSourceINT.Signal=TIM13_VS_ClockSourceINT
|
||||
VP_TIM14_VS_ClockSourceINT.Mode=Enable_Timer
|
||||
VP_TIM14_VS_ClockSourceINT.Signal=TIM14_VS_ClockSourceINT
|
||||
board=custom
|
||||
|
|
@ -0,0 +1,73 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.h
|
||||
* @brief : Header for main.c file.
|
||||
* This file contains the common defines of the application.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __MAIN_H
|
||||
#define __MAIN_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void Error_Handler(void);
|
||||
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __MAIN_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,443 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_conf_template.h
|
||||
* @author MCD Application Team
|
||||
* @brief HAL configuration template file.
|
||||
* This file should be copied to the application folder and renamed
|
||||
* to stm32f4xx_hal_conf.h.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_CONF_H
|
||||
#define __STM32F4xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
|
||||
#define HAL_ADC_MODULE_ENABLED
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
/* #define HAL_CAN_MODULE_ENABLED */
|
||||
/* #define HAL_CRC_MODULE_ENABLED */
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
/* #define HAL_DAC_MODULE_ENABLED */
|
||||
/* #define HAL_DCMI_MODULE_ENABLED */
|
||||
/* #define HAL_DMA2D_MODULE_ENABLED */
|
||||
/* #define HAL_ETH_MODULE_ENABLED */
|
||||
/* #define HAL_NAND_MODULE_ENABLED */
|
||||
/* #define HAL_NOR_MODULE_ENABLED */
|
||||
/* #define HAL_PCCARD_MODULE_ENABLED */
|
||||
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||
/* #define HAL_HASH_MODULE_ENABLED */
|
||||
/* #define HAL_I2C_MODULE_ENABLED */
|
||||
#define HAL_I2S_MODULE_ENABLED
|
||||
#define HAL_IWDG_MODULE_ENABLED
|
||||
/* #define HAL_LTDC_MODULE_ENABLED */
|
||||
#define HAL_RNG_MODULE_ENABLED
|
||||
#define HAL_RTC_MODULE_ENABLED
|
||||
/* #define HAL_SAI_MODULE_ENABLED */
|
||||
#define HAL_SD_MODULE_ENABLED
|
||||
/* #define HAL_MMC_MODULE_ENABLED */
|
||||
#define HAL_SPI_MODULE_ENABLED
|
||||
#define HAL_TIM_MODULE_ENABLED
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_SMBUS_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
/* #define HAL_PCD_MODULE_ENABLED */
|
||||
/* #define HAL_HCD_MODULE_ENABLED */
|
||||
/* #define HAL_DSI_MODULE_ENABLED */
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
/* #define HAL_CEC_MODULE_ENABLED */
|
||||
/* #define HAL_FMPI2C_MODULE_ENABLED */
|
||||
/* #define HAL_SPDIFRX_MODULE_ENABLED */
|
||||
/* #define HAL_DFSDM_MODULE_ENABLED */
|
||||
/* #define HAL_LPTIM_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_EXTI_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
|
||||
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#if !defined (EXTERNAL_CLOCK_VALUE)
|
||||
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## Ethernet peripheral configuration ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2U
|
||||
#define MAC_ADDR1 0U
|
||||
#define MAC_ADDR2 0U
|
||||
#define MAC_ADDR3 0U
|
||||
#define MAC_ADDR4 0U
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848_PHY_ADDRESS Address*/
|
||||
#define DP83848_PHY_ADDRESS 0x01U
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
|
||||
|
||||
#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
|
||||
#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
|
||||
|
||||
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 0U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smbus.h"
|
||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma2d.h"
|
||||
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SDRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sdram.h"
|
||||
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_ltdc.h"
|
||||
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DSI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dsi.h"
|
||||
#endif /* HAL_DSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FMPI2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_fmpi2c.h"
|
||||
#endif /* HAL_FMPI2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPDIFRX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spdifrx.h"
|
||||
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dfsdm.h"
|
||||
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr: If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_CONF_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,69 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_it.h
|
||||
* @brief This file contains the headers of the interrupt handlers.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_IT_H
|
||||
#define __STM32F4xx_IT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void NMI_Handler(void);
|
||||
void HardFault_Handler(void);
|
||||
void MemManage_Handler(void);
|
||||
void BusFault_Handler(void);
|
||||
void UsageFault_Handler(void);
|
||||
void SVC_Handler(void);
|
||||
void DebugMon_Handler(void);
|
||||
void PendSV_Handler(void);
|
||||
void SysTick_Handler(void);
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_IT_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,708 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
ADC_HandleTypeDef hadc1;
|
||||
|
||||
I2S_HandleTypeDef hi2s2;
|
||||
|
||||
IWDG_HandleTypeDef hiwdg;
|
||||
|
||||
RNG_HandleTypeDef hrng;
|
||||
|
||||
RTC_HandleTypeDef hrtc;
|
||||
|
||||
SD_HandleTypeDef hsd;
|
||||
|
||||
SPI_HandleTypeDef hspi3;
|
||||
|
||||
TIM_HandleTypeDef htim10;
|
||||
TIM_HandleTypeDef htim11;
|
||||
TIM_HandleTypeDef htim13;
|
||||
TIM_HandleTypeDef htim14;
|
||||
|
||||
UART_HandleTypeDef huart1;
|
||||
UART_HandleTypeDef huart2;
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
static void MX_GPIO_Init(void);
|
||||
static void MX_USART1_UART_Init(void);
|
||||
static void MX_ADC1_Init(void);
|
||||
static void MX_I2S2_Init(void);
|
||||
static void MX_IWDG_Init(void);
|
||||
static void MX_RTC_Init(void);
|
||||
static void MX_SDIO_SD_Init(void);
|
||||
static void MX_SPI3_Init(void);
|
||||
static void MX_TIM10_Init(void);
|
||||
static void MX_TIM11_Init(void);
|
||||
static void MX_TIM13_Init(void);
|
||||
static void MX_TIM14_Init(void);
|
||||
static void MX_RNG_Init(void);
|
||||
static void MX_USART2_UART_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
MX_USART1_UART_Init();
|
||||
MX_ADC1_Init();
|
||||
MX_I2S2_Init();
|
||||
MX_IWDG_Init();
|
||||
MX_RTC_Init();
|
||||
MX_SDIO_SD_Init();
|
||||
MX_SPI3_Init();
|
||||
MX_TIM10_Init();
|
||||
MX_TIM11_Init();
|
||||
MX_TIM13_Init();
|
||||
MX_TIM14_Init();
|
||||
MX_RNG_Init();
|
||||
MX_USART2_UART_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
|
||||
|
||||
/** Configure the main internal regulator output voltage
|
||||
*/
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
/** Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE
|
||||
|RCC_OSCILLATORTYPE_LSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
|
||||
RCC_OscInitStruct.LSIState = RCC_LSI_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 25;
|
||||
RCC_OscInitStruct.PLL.PLLN = 336;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 7;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/** Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_I2S|RCC_PERIPHCLK_RTC;
|
||||
PeriphClkInitStruct.PLLI2S.PLLI2SN = 192;
|
||||
PeriphClkInitStruct.PLLI2S.PLLI2SR = 2;
|
||||
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ADC1 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_ADC1_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN ADC1_Init 0 */
|
||||
|
||||
/* USER CODE END ADC1_Init 0 */
|
||||
|
||||
ADC_ChannelConfTypeDef sConfig = {0};
|
||||
|
||||
/* USER CODE BEGIN ADC1_Init 1 */
|
||||
|
||||
/* USER CODE END ADC1_Init 1 */
|
||||
/** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||||
*/
|
||||
hadc1.Instance = ADC1;
|
||||
hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
||||
hadc1.Init.Resolution = ADC_RESOLUTION_12B;
|
||||
hadc1.Init.ScanConvMode = DISABLE;
|
||||
hadc1.Init.ContinuousConvMode = DISABLE;
|
||||
hadc1.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
||||
hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
|
||||
hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc1.Init.NbrOfConversion = 1;
|
||||
hadc1.Init.DMAContinuousRequests = DISABLE;
|
||||
hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||
if (HAL_ADC_Init(&hadc1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/** Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
|
||||
*/
|
||||
sConfig.Channel = ADC_CHANNEL_9;
|
||||
sConfig.Rank = 1;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN ADC1_Init 2 */
|
||||
|
||||
/* USER CODE END ADC1_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief I2S2 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_I2S2_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN I2S2_Init 0 */
|
||||
|
||||
/* USER CODE END I2S2_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN I2S2_Init 1 */
|
||||
|
||||
/* USER CODE END I2S2_Init 1 */
|
||||
hi2s2.Instance = SPI2;
|
||||
hi2s2.Init.Mode = I2S_MODE_MASTER_TX;
|
||||
hi2s2.Init.Standard = I2S_STANDARD_PHILIPS;
|
||||
hi2s2.Init.DataFormat = I2S_DATAFORMAT_16B;
|
||||
hi2s2.Init.MCLKOutput = I2S_MCLKOUTPUT_ENABLE;
|
||||
hi2s2.Init.AudioFreq = I2S_AUDIOFREQ_8K;
|
||||
hi2s2.Init.CPOL = I2S_CPOL_LOW;
|
||||
hi2s2.Init.ClockSource = I2S_CLOCK_PLL;
|
||||
hi2s2.Init.FullDuplexMode = I2S_FULLDUPLEXMODE_ENABLE;
|
||||
if (HAL_I2S_Init(&hi2s2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN I2S2_Init 2 */
|
||||
|
||||
/* USER CODE END I2S2_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief IWDG Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_IWDG_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN IWDG_Init 0 */
|
||||
|
||||
/* USER CODE END IWDG_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN IWDG_Init 1 */
|
||||
|
||||
/* USER CODE END IWDG_Init 1 */
|
||||
hiwdg.Instance = IWDG;
|
||||
hiwdg.Init.Prescaler = IWDG_PRESCALER_4;
|
||||
hiwdg.Init.Reload = 4095;
|
||||
if (HAL_IWDG_Init(&hiwdg) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN IWDG_Init 2 */
|
||||
|
||||
/* USER CODE END IWDG_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief RNG Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_RNG_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN RNG_Init 0 */
|
||||
|
||||
/* USER CODE END RNG_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN RNG_Init 1 */
|
||||
|
||||
/* USER CODE END RNG_Init 1 */
|
||||
hrng.Instance = RNG;
|
||||
if (HAL_RNG_Init(&hrng) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN RNG_Init 2 */
|
||||
|
||||
/* USER CODE END RNG_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief RTC Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_RTC_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN RTC_Init 0 */
|
||||
|
||||
/* USER CODE END RTC_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN RTC_Init 1 */
|
||||
|
||||
/* USER CODE END RTC_Init 1 */
|
||||
/** Initialize RTC Only
|
||||
*/
|
||||
hrtc.Instance = RTC;
|
||||
hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
|
||||
hrtc.Init.AsynchPrediv = 127;
|
||||
hrtc.Init.SynchPrediv = 255;
|
||||
hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
|
||||
hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
|
||||
hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
|
||||
if (HAL_RTC_Init(&hrtc) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN RTC_Init 2 */
|
||||
|
||||
/* USER CODE END RTC_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SDIO Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_SDIO_SD_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN SDIO_Init 0 */
|
||||
|
||||
/* USER CODE END SDIO_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN SDIO_Init 1 */
|
||||
|
||||
/* USER CODE END SDIO_Init 1 */
|
||||
hsd.Instance = SDIO;
|
||||
hsd.Init.ClockEdge = SDIO_CLOCK_EDGE_RISING;
|
||||
hsd.Init.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE;
|
||||
hsd.Init.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_DISABLE;
|
||||
hsd.Init.BusWide = SDIO_BUS_WIDE_1B;
|
||||
hsd.Init.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE;
|
||||
hsd.Init.ClockDiv = 0;
|
||||
if (HAL_SD_Init(&hsd) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_SD_ConfigWideBusOperation(&hsd, SDIO_BUS_WIDE_4B) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN SDIO_Init 2 */
|
||||
|
||||
/* USER CODE END SDIO_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SPI3 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_SPI3_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN SPI3_Init 0 */
|
||||
|
||||
/* USER CODE END SPI3_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN SPI3_Init 1 */
|
||||
|
||||
/* USER CODE END SPI3_Init 1 */
|
||||
/* SPI3 parameter configuration*/
|
||||
hspi3.Instance = SPI3;
|
||||
hspi3.Init.Mode = SPI_MODE_MASTER;
|
||||
hspi3.Init.Direction = SPI_DIRECTION_2LINES;
|
||||
hspi3.Init.DataSize = SPI_DATASIZE_8BIT;
|
||||
hspi3.Init.CLKPolarity = SPI_POLARITY_LOW;
|
||||
hspi3.Init.CLKPhase = SPI_PHASE_1EDGE;
|
||||
hspi3.Init.NSS = SPI_NSS_SOFT;
|
||||
hspi3.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
|
||||
hspi3.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||||
hspi3.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||
hspi3.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||||
hspi3.Init.CRCPolynomial = 10;
|
||||
if (HAL_SPI_Init(&hspi3) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN SPI3_Init 2 */
|
||||
|
||||
/* USER CODE END SPI3_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief TIM10 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_TIM10_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN TIM10_Init 0 */
|
||||
|
||||
/* USER CODE END TIM10_Init 0 */
|
||||
|
||||
TIM_OC_InitTypeDef sConfigOC = {0};
|
||||
|
||||
/* USER CODE BEGIN TIM10_Init 1 */
|
||||
|
||||
/* USER CODE END TIM10_Init 1 */
|
||||
htim10.Instance = TIM10;
|
||||
htim10.Init.Prescaler = 0;
|
||||
htim10.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim10.Init.Period = 0;
|
||||
htim10.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
htim10.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||
if (HAL_TIM_Base_Init(&htim10) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_TIM_PWM_Init(&htim10) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
||||
sConfigOC.Pulse = 0;
|
||||
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim10, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN TIM10_Init 2 */
|
||||
|
||||
/* USER CODE END TIM10_Init 2 */
|
||||
HAL_TIM_MspPostInit(&htim10);
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief TIM11 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_TIM11_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN TIM11_Init 0 */
|
||||
|
||||
/* USER CODE END TIM11_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN TIM11_Init 1 */
|
||||
|
||||
/* USER CODE END TIM11_Init 1 */
|
||||
htim11.Instance = TIM11;
|
||||
htim11.Init.Prescaler = 0;
|
||||
htim11.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim11.Init.Period = 0;
|
||||
htim11.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
htim11.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||
if (HAL_TIM_Base_Init(&htim11) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN TIM11_Init 2 */
|
||||
|
||||
/* USER CODE END TIM11_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief TIM13 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_TIM13_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN TIM13_Init 0 */
|
||||
|
||||
/* USER CODE END TIM13_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN TIM13_Init 1 */
|
||||
|
||||
/* USER CODE END TIM13_Init 1 */
|
||||
htim13.Instance = TIM13;
|
||||
htim13.Init.Prescaler = 0;
|
||||
htim13.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim13.Init.Period = 0;
|
||||
htim13.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
htim13.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||
if (HAL_TIM_Base_Init(&htim13) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN TIM13_Init 2 */
|
||||
|
||||
/* USER CODE END TIM13_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief TIM14 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_TIM14_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN TIM14_Init 0 */
|
||||
|
||||
/* USER CODE END TIM14_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN TIM14_Init 1 */
|
||||
|
||||
/* USER CODE END TIM14_Init 1 */
|
||||
htim14.Instance = TIM14;
|
||||
htim14.Init.Prescaler = 0;
|
||||
htim14.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim14.Init.Period = 0;
|
||||
htim14.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
htim14.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||
if (HAL_TIM_Base_Init(&htim14) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN TIM14_Init 2 */
|
||||
|
||||
/* USER CODE END TIM14_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USART1 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_USART1_UART_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN USART1_Init 0 */
|
||||
|
||||
/* USER CODE END USART1_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN USART1_Init 1 */
|
||||
|
||||
/* USER CODE END USART1_Init 1 */
|
||||
huart1.Instance = USART1;
|
||||
huart1.Init.BaudRate = 115200;
|
||||
huart1.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart1.Init.StopBits = UART_STOPBITS_1;
|
||||
huart1.Init.Parity = UART_PARITY_NONE;
|
||||
huart1.Init.Mode = UART_MODE_TX_RX;
|
||||
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
if (HAL_UART_Init(&huart1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN USART1_Init 2 */
|
||||
|
||||
/* USER CODE END USART1_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USART2 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_USART2_UART_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN USART2_Init 0 */
|
||||
|
||||
/* USER CODE END USART2_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN USART2_Init 1 */
|
||||
|
||||
/* USER CODE END USART2_Init 1 */
|
||||
huart2.Instance = USART2;
|
||||
huart2.Init.BaudRate = 115200;
|
||||
huart2.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart2.Init.StopBits = UART_STOPBITS_1;
|
||||
huart2.Init.Parity = UART_PARITY_NONE;
|
||||
huart2.Init.Mode = UART_MODE_TX_RX;
|
||||
huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart2.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
if (HAL_UART_Init(&huart2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN USART2_Init 2 */
|
||||
|
||||
/* USER CODE END USART2_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief GPIO Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_GPIO_Init(void)
|
||||
{
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOF_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOH_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOI_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,721 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : stm32f4xx_hal_msp.c
|
||||
* Description : This file provides code for the MSP Initialization
|
||||
* and de-Initialization codes.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Define */
|
||||
|
||||
/* USER CODE END Define */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Macro */
|
||||
|
||||
/* USER CODE END Macro */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* External functions --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ExternalFunctions */
|
||||
|
||||
/* USER CODE END ExternalFunctions */
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
|
||||
/**
|
||||
* Initializes the Global MSP.
|
||||
*/
|
||||
void HAL_MspInit(void)
|
||||
{
|
||||
/* USER CODE BEGIN MspInit 0 */
|
||||
|
||||
/* USER CODE END MspInit 0 */
|
||||
|
||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
/* System interrupt init*/
|
||||
|
||||
/* USER CODE BEGIN MspInit 1 */
|
||||
|
||||
/* USER CODE END MspInit 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ADC MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param hadc: ADC handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(hadc->Instance==ADC1)
|
||||
{
|
||||
/* USER CODE BEGIN ADC1_MspInit 0 */
|
||||
|
||||
/* USER CODE END ADC1_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_ADC1_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/**ADC1 GPIO Configuration
|
||||
PB1 ------> ADC1_IN9
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_1;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN ADC1_MspInit 1 */
|
||||
|
||||
/* USER CODE END ADC1_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ADC MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param hadc: ADC handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
|
||||
{
|
||||
if(hadc->Instance==ADC1)
|
||||
{
|
||||
/* USER CODE BEGIN ADC1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END ADC1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ADC1_CLK_DISABLE();
|
||||
|
||||
/**ADC1 GPIO Configuration
|
||||
PB1 ------> ADC1_IN9
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_1);
|
||||
|
||||
/* USER CODE BEGIN ADC1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END ADC1_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief I2S MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param hi2s: I2S handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_I2S_MspInit(I2S_HandleTypeDef* hi2s)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(hi2s->Instance==SPI2)
|
||||
{
|
||||
/* USER CODE BEGIN SPI2_MspInit 0 */
|
||||
|
||||
/* USER CODE END SPI2_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_SPI2_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOI_CLK_ENABLE();
|
||||
/**I2S2 GPIO Configuration
|
||||
PB12 ------> I2S2_WS
|
||||
PB13 ------> I2S2_CK
|
||||
PB15 ------> I2S2_SD
|
||||
PC6 ------> I2S2_MCK
|
||||
PI2 ------> I2S2_ext_SD
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_15;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_6;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_2;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF6_I2S2ext;
|
||||
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN SPI2_MspInit 1 */
|
||||
|
||||
/* USER CODE END SPI2_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief I2S MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param hi2s: I2S handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_I2S_MspDeInit(I2S_HandleTypeDef* hi2s)
|
||||
{
|
||||
if(hi2s->Instance==SPI2)
|
||||
{
|
||||
/* USER CODE BEGIN SPI2_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END SPI2_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_SPI2_CLK_DISABLE();
|
||||
|
||||
/**I2S2 GPIO Configuration
|
||||
PB12 ------> I2S2_WS
|
||||
PB13 ------> I2S2_CK
|
||||
PB15 ------> I2S2_SD
|
||||
PC6 ------> I2S2_MCK
|
||||
PI2 ------> I2S2_ext_SD
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_15);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_6);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOI, GPIO_PIN_2);
|
||||
|
||||
/* USER CODE BEGIN SPI2_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END SPI2_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief RNG MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param hrng: RNG handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_RNG_MspInit(RNG_HandleTypeDef* hrng)
|
||||
{
|
||||
if(hrng->Instance==RNG)
|
||||
{
|
||||
/* USER CODE BEGIN RNG_MspInit 0 */
|
||||
|
||||
/* USER CODE END RNG_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_RNG_CLK_ENABLE();
|
||||
/* USER CODE BEGIN RNG_MspInit 1 */
|
||||
|
||||
/* USER CODE END RNG_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief RNG MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param hrng: RNG handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_RNG_MspDeInit(RNG_HandleTypeDef* hrng)
|
||||
{
|
||||
if(hrng->Instance==RNG)
|
||||
{
|
||||
/* USER CODE BEGIN RNG_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END RNG_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_RNG_CLK_DISABLE();
|
||||
/* USER CODE BEGIN RNG_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END RNG_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief RTC MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param hrtc: RTC handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
|
||||
{
|
||||
if(hrtc->Instance==RTC)
|
||||
{
|
||||
/* USER CODE BEGIN RTC_MspInit 0 */
|
||||
|
||||
/* USER CODE END RTC_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_RTC_ENABLE();
|
||||
/* USER CODE BEGIN RTC_MspInit 1 */
|
||||
|
||||
/* USER CODE END RTC_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief RTC MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param hrtc: RTC handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
|
||||
{
|
||||
if(hrtc->Instance==RTC)
|
||||
{
|
||||
/* USER CODE BEGIN RTC_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END RTC_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_RTC_DISABLE();
|
||||
/* USER CODE BEGIN RTC_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END RTC_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SD MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param hsd: SD handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(hsd->Instance==SDIO)
|
||||
{
|
||||
/* USER CODE BEGIN SDIO_MspInit 0 */
|
||||
|
||||
/* USER CODE END SDIO_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_SDIO_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
/**SDIO GPIO Configuration
|
||||
PC8 ------> SDIO_D0
|
||||
PC9 ------> SDIO_D1
|
||||
PC10 ------> SDIO_D2
|
||||
PC11 ------> SDIO_D3
|
||||
PC12 ------> SDIO_CK
|
||||
PD2 ------> SDIO_CMD
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
|
||||
|GPIO_PIN_12;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_2;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
|
||||
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN SDIO_MspInit 1 */
|
||||
|
||||
/* USER CODE END SDIO_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SD MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param hsd: SD handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
|
||||
{
|
||||
if(hsd->Instance==SDIO)
|
||||
{
|
||||
/* USER CODE BEGIN SDIO_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END SDIO_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_SDIO_CLK_DISABLE();
|
||||
|
||||
/**SDIO GPIO Configuration
|
||||
PC8 ------> SDIO_D0
|
||||
PC9 ------> SDIO_D1
|
||||
PC10 ------> SDIO_D2
|
||||
PC11 ------> SDIO_D3
|
||||
PC12 ------> SDIO_CK
|
||||
PD2 ------> SDIO_CMD
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
|
||||
|GPIO_PIN_12);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
|
||||
|
||||
/* USER CODE BEGIN SDIO_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END SDIO_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SPI MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param hspi: SPI handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(hspi->Instance==SPI3)
|
||||
{
|
||||
/* USER CODE BEGIN SPI3_MspInit 0 */
|
||||
|
||||
/* USER CODE END SPI3_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_SPI3_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/**SPI3 GPIO Configuration
|
||||
PB3 ------> SPI3_SCK
|
||||
PB4 ------> SPI3_MISO
|
||||
PB5 ------> SPI3_MOSI
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN SPI3_MspInit 1 */
|
||||
|
||||
/* USER CODE END SPI3_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SPI MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param hspi: SPI handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
|
||||
{
|
||||
if(hspi->Instance==SPI3)
|
||||
{
|
||||
/* USER CODE BEGIN SPI3_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END SPI3_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_SPI3_CLK_DISABLE();
|
||||
|
||||
/**SPI3 GPIO Configuration
|
||||
PB3 ------> SPI3_SCK
|
||||
PB4 ------> SPI3_MISO
|
||||
PB5 ------> SPI3_MOSI
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5);
|
||||
|
||||
/* USER CODE BEGIN SPI3_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END SPI3_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief TIM_Base MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param htim_base: TIM_Base handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
|
||||
{
|
||||
if(htim_base->Instance==TIM10)
|
||||
{
|
||||
/* USER CODE BEGIN TIM10_MspInit 0 */
|
||||
|
||||
/* USER CODE END TIM10_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_TIM10_CLK_ENABLE();
|
||||
/* USER CODE BEGIN TIM10_MspInit 1 */
|
||||
|
||||
/* USER CODE END TIM10_MspInit 1 */
|
||||
}
|
||||
else if(htim_base->Instance==TIM11)
|
||||
{
|
||||
/* USER CODE BEGIN TIM11_MspInit 0 */
|
||||
|
||||
/* USER CODE END TIM11_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_TIM11_CLK_ENABLE();
|
||||
/* USER CODE BEGIN TIM11_MspInit 1 */
|
||||
|
||||
/* USER CODE END TIM11_MspInit 1 */
|
||||
}
|
||||
else if(htim_base->Instance==TIM13)
|
||||
{
|
||||
/* USER CODE BEGIN TIM13_MspInit 0 */
|
||||
|
||||
/* USER CODE END TIM13_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_TIM13_CLK_ENABLE();
|
||||
/* USER CODE BEGIN TIM13_MspInit 1 */
|
||||
|
||||
/* USER CODE END TIM13_MspInit 1 */
|
||||
}
|
||||
else if(htim_base->Instance==TIM14)
|
||||
{
|
||||
/* USER CODE BEGIN TIM14_MspInit 0 */
|
||||
|
||||
/* USER CODE END TIM14_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_TIM14_CLK_ENABLE();
|
||||
/* USER CODE BEGIN TIM14_MspInit 1 */
|
||||
|
||||
/* USER CODE END TIM14_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(htim->Instance==TIM10)
|
||||
{
|
||||
/* USER CODE BEGIN TIM10_MspPostInit 0 */
|
||||
|
||||
/* USER CODE END TIM10_MspPostInit 0 */
|
||||
|
||||
__HAL_RCC_GPIOF_CLK_ENABLE();
|
||||
/**TIM10 GPIO Configuration
|
||||
PF6 ------> TIM10_CH1
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_6;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF3_TIM10;
|
||||
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN TIM10_MspPostInit 1 */
|
||||
|
||||
/* USER CODE END TIM10_MspPostInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
/**
|
||||
* @brief TIM_Base MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param htim_base: TIM_Base handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
|
||||
{
|
||||
if(htim_base->Instance==TIM10)
|
||||
{
|
||||
/* USER CODE BEGIN TIM10_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END TIM10_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_TIM10_CLK_DISABLE();
|
||||
/* USER CODE BEGIN TIM10_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END TIM10_MspDeInit 1 */
|
||||
}
|
||||
else if(htim_base->Instance==TIM11)
|
||||
{
|
||||
/* USER CODE BEGIN TIM11_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END TIM11_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_TIM11_CLK_DISABLE();
|
||||
/* USER CODE BEGIN TIM11_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END TIM11_MspDeInit 1 */
|
||||
}
|
||||
else if(htim_base->Instance==TIM13)
|
||||
{
|
||||
/* USER CODE BEGIN TIM13_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END TIM13_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_TIM13_CLK_DISABLE();
|
||||
/* USER CODE BEGIN TIM13_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END TIM13_MspDeInit 1 */
|
||||
}
|
||||
else if(htim_base->Instance==TIM14)
|
||||
{
|
||||
/* USER CODE BEGIN TIM14_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END TIM14_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_TIM14_CLK_DISABLE();
|
||||
/* USER CODE BEGIN TIM14_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END TIM14_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief UART MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param huart: UART handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(huart->Instance==USART1)
|
||||
{
|
||||
/* USER CODE BEGIN USART1_MspInit 0 */
|
||||
|
||||
/* USER CODE END USART1_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_USART1_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
/**USART1 GPIO Configuration
|
||||
PA9 ------> USART1_TX
|
||||
PA10 ------> USART1_RX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN USART1_MspInit 1 */
|
||||
|
||||
/* USER CODE END USART1_MspInit 1 */
|
||||
}
|
||||
else if(huart->Instance==USART2)
|
||||
{
|
||||
/* USER CODE BEGIN USART2_MspInit 0 */
|
||||
|
||||
/* USER CODE END USART2_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_USART2_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
/**USART2 GPIO Configuration
|
||||
PA2 ------> USART2_TX
|
||||
PA3 ------> USART2_RX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN USART2_MspInit 1 */
|
||||
|
||||
/* USER CODE END USART2_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief UART MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param huart: UART handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
||||
{
|
||||
if(huart->Instance==USART1)
|
||||
{
|
||||
/* USER CODE BEGIN USART1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END USART1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_USART1_CLK_DISABLE();
|
||||
|
||||
/**USART1 GPIO Configuration
|
||||
PA9 ------> USART1_TX
|
||||
PA10 ------> USART1_RX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
|
||||
|
||||
/* USER CODE BEGIN USART1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END USART1_MspDeInit 1 */
|
||||
}
|
||||
else if(huart->Instance==USART2)
|
||||
{
|
||||
/* USER CODE BEGIN USART2_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END USART2_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_USART2_CLK_DISABLE();
|
||||
|
||||
/**USART2 GPIO Configuration
|
||||
PA2 ------> USART2_TX
|
||||
PA3 ------> USART2_RX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
|
||||
|
||||
/* USER CODE BEGIN USART2_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END USART2_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,203 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_it.c
|
||||
* @brief Interrupt Service Routines.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "stm32f4xx_it.h"
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN EV */
|
||||
|
||||
/* USER CODE END EV */
|
||||
|
||||
/******************************************************************************/
|
||||
/* Cortex-M4 Processor Interruption and Exception Handlers */
|
||||
/******************************************************************************/
|
||||
/**
|
||||
* @brief This function handles Non maskable interrupt.
|
||||
*/
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Hard fault interrupt.
|
||||
*/
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN HardFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END HardFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
|
||||
/* USER CODE END W1_HardFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Memory management fault.
|
||||
*/
|
||||
void MemManage_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN MemoryManagement_IRQn 0 */
|
||||
|
||||
/* USER CODE END MemoryManagement_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
|
||||
/* USER CODE END W1_MemoryManagement_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pre-fetch fault, memory access fault.
|
||||
*/
|
||||
void BusFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN BusFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END BusFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_BusFault_IRQn 0 */
|
||||
/* USER CODE END W1_BusFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Undefined instruction or illegal state.
|
||||
*/
|
||||
void UsageFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN UsageFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END UsageFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_UsageFault_IRQn 0 */
|
||||
/* USER CODE END W1_UsageFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System service call via SWI instruction.
|
||||
*/
|
||||
void SVC_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SVCall_IRQn 0 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 0 */
|
||||
/* USER CODE BEGIN SVCall_IRQn 1 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Debug monitor.
|
||||
*/
|
||||
void DebugMon_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 0 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 0 */
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pendable request for system service.
|
||||
*/
|
||||
void PendSV_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN PendSV_IRQn 0 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 0 */
|
||||
/* USER CODE BEGIN PendSV_IRQn 1 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System tick timer.
|
||||
*/
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SysTick_IRQn 0 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 0 */
|
||||
HAL_IncTick();
|
||||
/* USER CODE BEGIN SysTick_IRQn 1 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 1 */
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* STM32F4xx Peripheral Interrupt Handlers */
|
||||
/* Add here the Interrupt Handlers for the used peripherals. */
|
||||
/* For the available peripheral interrupt handler names, */
|
||||
/* please refer to the startup file (startup_stm32f4xx.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,727 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f4xx.c
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
|
||||
*
|
||||
* This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32f4xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
*
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f4xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
#include "stm32f4xx.h"
|
||||
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/************************* Miscellaneous Configuration ************************/
|
||||
/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
|
||||
|| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
|
||||
/* #define DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
|
||||
STM32F412Zx || STM32F412Vx */
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* #define DATA_IN_ExtSDRAM */
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
|
||||
STM32F479xx */
|
||||
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table in
|
||||
Internal SRAM. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
/* This variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
uint32_t SystemCoreClock = 16000000;
|
||||
const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
static void SystemInit_ExtMemCtl(void);
|
||||
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system
|
||||
* Initialize the FPU setting, vector table location and External memory
|
||||
* configuration.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit(void)
|
||||
{
|
||||
/* FPU settings ------------------------------------------------------------*/
|
||||
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
|
||||
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
|
||||
#endif
|
||||
|
||||
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
SystemInit_ExtMemCtl();
|
||||
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
|
||||
|
||||
/* Configure the Vector Table location add offset address ------------------*/
|
||||
#ifdef VECT_TAB_SRAM
|
||||
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
||||
#else
|
||||
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||
* be used by the user application to setup the SysTick timer or configure
|
||||
* other parameters.
|
||||
*
|
||||
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||
* based on this variable will be incorrect.
|
||||
*
|
||||
* @note - The system frequency computed by this function is not the real
|
||||
* frequency in the chip. It is calculated based on the predefined
|
||||
* constant and the selected clock source:
|
||||
*
|
||||
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
||||
*
|
||||
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
*
|
||||
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
|
||||
*
|
||||
* (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
|
||||
* 16 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
|
||||
* depends on the application requirements), user has to ensure that HSE_VALUE
|
||||
* is same as the real frequency of the crystal used. Otherwise, this function
|
||||
* may have wrong result.
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
*
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemCoreClockUpdate(void)
|
||||
{
|
||||
uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
|
||||
|
||||
/* Get SYSCLK source -------------------------------------------------------*/
|
||||
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
||||
|
||||
switch (tmp)
|
||||
{
|
||||
case 0x00: /* HSI used as system clock source */
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
case 0x04: /* HSE used as system clock source */
|
||||
SystemCoreClock = HSE_VALUE;
|
||||
break;
|
||||
case 0x08: /* PLL used as system clock source */
|
||||
|
||||
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
|
||||
SYSCLK = PLL_VCO / PLL_P
|
||||
*/
|
||||
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
|
||||
pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
|
||||
|
||||
if (pllsource != 0)
|
||||
{
|
||||
/* HSE used as PLL clock source */
|
||||
pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* HSI used as PLL clock source */
|
||||
pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
||||
}
|
||||
|
||||
pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
|
||||
SystemCoreClock = pllvco/pllp;
|
||||
break;
|
||||
default:
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
}
|
||||
/* Compute HCLK frequency --------------------------------------------------*/
|
||||
/* Get HCLK prescaler */
|
||||
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
|
||||
/* HCLK frequency */
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f4xx.s before jump to main.
|
||||
* This function configures the external memories (SRAM/SDRAM)
|
||||
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
__IO uint32_t tmp = 0x00;
|
||||
|
||||
register uint32_t tmpreg = 0, timeout = 0xFFFF;
|
||||
register __IO uint32_t index;
|
||||
|
||||
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
|
||||
RCC->AHB1ENR |= 0x000001F8;
|
||||
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
|
||||
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x00CCC0CC;
|
||||
GPIOD->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xAAAA0A8A;
|
||||
/* Configure PDx pins speed to 100 MHz */
|
||||
GPIOD->OSPEEDR = 0xFFFF0FCF;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00CC0CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA828A;
|
||||
/* Configure PEx pins speed to 100 MHz */
|
||||
GPIOE->OSPEEDR = 0xFFFFC3CF;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA800AAA;
|
||||
/* Configure PFx pins speed to 50 MHz */
|
||||
GPIOF->OSPEEDR = 0xAA800AAA;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOG->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0xAAAAAAAA;
|
||||
/* Configure PGx pins speed to 50 MHz */
|
||||
GPIOG->OSPEEDR = 0xAAAAAAAA;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PHx pins to FMC Alternate function */
|
||||
GPIOH->AFR[0] = 0x00C0CC00;
|
||||
GPIOH->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PHx pins in Alternate function mode */
|
||||
GPIOH->MODER = 0xAAAA08A0;
|
||||
/* Configure PHx pins speed to 50 MHz */
|
||||
GPIOH->OSPEEDR = 0xAAAA08A0;
|
||||
/* Configure PHx pins Output type to push-pull */
|
||||
GPIOH->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PHx pins */
|
||||
GPIOH->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PIx pins to FMC Alternate function */
|
||||
GPIOI->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOI->AFR[1] = 0x00000CC0;
|
||||
/* Configure PIx pins in Alternate function mode */
|
||||
GPIOI->MODER = 0x0028AAAA;
|
||||
/* Configure PIx pins speed to 50 MHz */
|
||||
GPIOI->OSPEEDR = 0x0028AAAA;
|
||||
/* Configure PIx pins Output type to push-pull */
|
||||
GPIOI->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PIx pins */
|
||||
GPIOI->PUPDR = 0x00000000;
|
||||
|
||||
/*-- FMC Configuration -------------------------------------------------------*/
|
||||
/* Enable the FMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
|
||||
FMC_Bank5_6->SDCR[0] = 0x000019E4;
|
||||
FMC_Bank5_6->SDTR[0] = 0x01115351;
|
||||
|
||||
/* SDRAM initialization sequence */
|
||||
/* Clock enable command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000011;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Delay */
|
||||
for (index = 0; index<1000; index++);
|
||||
|
||||
/* PALL command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000012;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Auto refresh command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000073;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* MRD register program */
|
||||
FMC_Bank5_6->SDCMR = 0x00046014;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Set refresh count */
|
||||
tmpreg = FMC_Bank5_6->SDRTR;
|
||||
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
|
||||
|
||||
/* Disable write protection */
|
||||
tmpreg = FMC_Bank5_6->SDCR[0];
|
||||
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
||||
#if defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001091;
|
||||
FMC_Bank1->BTCR[3] = 0x00110212;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F469xx || STM32F479xx */
|
||||
|
||||
(void)(tmp);
|
||||
}
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
||||
#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f4xx.s before jump to main.
|
||||
* This function configures the external memories (SRAM/SDRAM)
|
||||
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
__IO uint32_t tmp = 0x00;
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
#if defined (DATA_IN_ExtSDRAM)
|
||||
register uint32_t tmpreg = 0, timeout = 0xFFFF;
|
||||
register __IO uint32_t index;
|
||||
|
||||
#if defined(STM32F446xx)
|
||||
/* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
|
||||
clock */
|
||||
RCC->AHB1ENR |= 0x0000007D;
|
||||
#else
|
||||
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
|
||||
clock */
|
||||
RCC->AHB1ENR |= 0x000001F8;
|
||||
#endif /* STM32F446xx */
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
|
||||
|
||||
#if defined(STM32F446xx)
|
||||
/* Connect PAx pins to FMC Alternate function */
|
||||
GPIOA->AFR[0] |= 0xC0000000;
|
||||
GPIOA->AFR[1] |= 0x00000000;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOA->MODER |= 0x00008000;
|
||||
/* Configure PDx pins speed to 50 MHz */
|
||||
GPIOA->OSPEEDR |= 0x00008000;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOA->OTYPER |= 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOA->PUPDR |= 0x00000000;
|
||||
|
||||
/* Connect PCx pins to FMC Alternate function */
|
||||
GPIOC->AFR[0] |= 0x00CC0000;
|
||||
GPIOC->AFR[1] |= 0x00000000;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOC->MODER |= 0x00000A00;
|
||||
/* Configure PDx pins speed to 50 MHz */
|
||||
GPIOC->OSPEEDR |= 0x00000A00;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOC->OTYPER |= 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOC->PUPDR |= 0x00000000;
|
||||
#endif /* STM32F446xx */
|
||||
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x000000CC;
|
||||
GPIOD->AFR[1] = 0xCC000CCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xA02A000A;
|
||||
/* Configure PDx pins speed to 50 MHz */
|
||||
GPIOD->OSPEEDR = 0xA02A000A;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00000CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA800A;
|
||||
/* Configure PEx pins speed to 50 MHz */
|
||||
GPIOE->OSPEEDR = 0xAAAA800A;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA800AAA;
|
||||
/* Configure PFx pins speed to 50 MHz */
|
||||
GPIOF->OSPEEDR = 0xAA800AAA;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOG->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0xAAAAAAAA;
|
||||
/* Configure PGx pins speed to 50 MHz */
|
||||
GPIOG->OSPEEDR = 0xAAAAAAAA;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* Connect PHx pins to FMC Alternate function */
|
||||
GPIOH->AFR[0] = 0x00C0CC00;
|
||||
GPIOH->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PHx pins in Alternate function mode */
|
||||
GPIOH->MODER = 0xAAAA08A0;
|
||||
/* Configure PHx pins speed to 50 MHz */
|
||||
GPIOH->OSPEEDR = 0xAAAA08A0;
|
||||
/* Configure PHx pins Output type to push-pull */
|
||||
GPIOH->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PHx pins */
|
||||
GPIOH->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PIx pins to FMC Alternate function */
|
||||
GPIOI->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOI->AFR[1] = 0x00000CC0;
|
||||
/* Configure PIx pins in Alternate function mode */
|
||||
GPIOI->MODER = 0x0028AAAA;
|
||||
/* Configure PIx pins speed to 50 MHz */
|
||||
GPIOI->OSPEEDR = 0x0028AAAA;
|
||||
/* Configure PIx pins Output type to push-pull */
|
||||
GPIOI->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PIx pins */
|
||||
GPIOI->PUPDR = 0x00000000;
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
/*-- FMC Configuration -------------------------------------------------------*/
|
||||
/* Enable the FMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
|
||||
/* Configure and enable SDRAM bank1 */
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDCR[0] = 0x00001954;
|
||||
#else
|
||||
FMC_Bank5_6->SDCR[0] = 0x000019E4;
|
||||
#endif /* STM32F446xx */
|
||||
FMC_Bank5_6->SDTR[0] = 0x01115351;
|
||||
|
||||
/* SDRAM initialization sequence */
|
||||
/* Clock enable command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000011;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Delay */
|
||||
for (index = 0; index<1000; index++);
|
||||
|
||||
/* PALL command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000012;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Auto refresh command */
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDCMR = 0x000000F3;
|
||||
#else
|
||||
FMC_Bank5_6->SDCMR = 0x00000073;
|
||||
#endif /* STM32F446xx */
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* MRD register program */
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDCMR = 0x00044014;
|
||||
#else
|
||||
FMC_Bank5_6->SDCMR = 0x00046014;
|
||||
#endif /* STM32F446xx */
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Set refresh count */
|
||||
tmpreg = FMC_Bank5_6->SDRTR;
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
|
||||
#else
|
||||
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
|
||||
#endif /* STM32F446xx */
|
||||
|
||||
/* Disable write protection */
|
||||
tmpreg = FMC_Bank5_6->SDCR[0];
|
||||
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
|
||||
#endif /* DATA_IN_ExtSDRAM */
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
|
||||
|| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
|
||||
|
||||
#if defined(DATA_IN_ExtSRAM)
|
||||
/*-- GPIOs Configuration -----------------------------------------------------*/
|
||||
/* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
|
||||
RCC->AHB1ENR |= 0x00000078;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
|
||||
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x00CCC0CC;
|
||||
GPIOD->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xAAAA0A8A;
|
||||
/* Configure PDx pins speed to 100 MHz */
|
||||
GPIOD->OSPEEDR = 0xFFFF0FCF;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00CC0CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA828A;
|
||||
/* Configure PEx pins speed to 100 MHz */
|
||||
GPIOE->OSPEEDR = 0xFFFFC3CF;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0x00CCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCC0000;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA000AAA;
|
||||
/* Configure PFx pins speed to 100 MHz */
|
||||
GPIOF->OSPEEDR = 0xFF000FFF;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0x00CCCCCC;
|
||||
GPIOG->AFR[1] = 0x000000C0;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0x00085AAA;
|
||||
/* Configure PGx pins speed to 100 MHz */
|
||||
GPIOG->OSPEEDR = 0x000CAFFF;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
/*-- FMC/FSMC Configuration --------------------------------------------------*/
|
||||
/* Enable the FMC/FSMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
||||
#if defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001091;
|
||||
FMC_Bank1->BTCR[3] = 0x00110212;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F469xx || STM32F479xx */
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
|
||||
|| defined(STM32F412Zx) || defined(STM32F412Vx)
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FSMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FSMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
|
||||
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
|
||||
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
|
||||
STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx */
|
||||
(void)(tmp);
|
||||
}
|
||||
#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,199 @@
|
|||
menu "Hardware Drivers Config"
|
||||
|
||||
config SOC_STM32F407IG
|
||||
bool
|
||||
select SOC_SERIES_STM32F4
|
||||
select RT_USING_COMPONENTS_INIT
|
||||
select RT_USING_USER_MAIN
|
||||
default y
|
||||
|
||||
menu "Onboard Peripheral Drivers"
|
||||
|
||||
config BSP_USING_RS232_TO_USART
|
||||
bool "Enable RS232 TO USART (uart1)"
|
||||
select BSP_USING_UART
|
||||
select BSP_USING_UART1
|
||||
default y
|
||||
|
||||
config BSP_USING_SPI_FLASH
|
||||
bool "Enable SPI FLASH (W25Q64 spi3)"
|
||||
select BSP_USING_SPI
|
||||
select BSP_USING_SPI3
|
||||
select RT_USING_SFUD
|
||||
select RT_SFUD_USING_SFDP
|
||||
default n
|
||||
|
||||
config BSP_USING_SDCARD
|
||||
bool "Enable SDCARD (sdio)"
|
||||
select BSP_USING_SDIO
|
||||
select RT_USING_DFS
|
||||
select RT_USING_DFS_ELMFAT
|
||||
default n
|
||||
|
||||
config BSP_USING_MPU6050
|
||||
bool "Enable MPU6050(i2c2)"
|
||||
select BSP_USING_I2C2
|
||||
select PKG_USING_SENSORS_DRIVERS
|
||||
select PKG_USING_MPU6XXX
|
||||
select PKG_USING_MPU6XXX_SAMPLE
|
||||
select PKG_USING_MPU6XXX_LATEST_VERSION
|
||||
default n
|
||||
|
||||
endmenu
|
||||
|
||||
menu "On-chip Peripheral Drivers"
|
||||
|
||||
config BSP_USING_GPIO
|
||||
bool "Enable GPIO"
|
||||
select RT_USING_PIN
|
||||
default y
|
||||
|
||||
menuconfig BSP_USING_UART
|
||||
bool "Enable UART"
|
||||
default y
|
||||
select RT_USING_SERIAL
|
||||
if BSP_USING_UART
|
||||
config BSP_USING_UART1
|
||||
bool "Enable UART1"
|
||||
default y
|
||||
|
||||
config BSP_UART1_RX_USING_DMA
|
||||
bool "Enable UART1 RX DMA"
|
||||
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
|
||||
default n
|
||||
|
||||
config BSP_USING_UART2
|
||||
bool "Enable UART2"
|
||||
default y
|
||||
|
||||
config BSP_UART2_RX_USING_DMA
|
||||
bool "Enable UART2 RX DMA"
|
||||
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
|
||||
default n
|
||||
|
||||
endif
|
||||
|
||||
config BSP_USING_ON_CHIP_FLASH
|
||||
bool "Enable on-chip FLASH"
|
||||
default n
|
||||
|
||||
menuconfig BSP_USING_SPI
|
||||
bool "Enable SPI BUS"
|
||||
default n
|
||||
select RT_USING_SPI
|
||||
if BSP_USING_SPI
|
||||
config BSP_USING_SPI3
|
||||
bool "Enable SPI3 BUS"
|
||||
default n
|
||||
|
||||
config BSP_SPI3_TX_USING_DMA
|
||||
bool "Enable SPI3 TX DMA"
|
||||
depends on BSP_USING_SPI3
|
||||
default n
|
||||
|
||||
config BSP_SPI3_RX_USING_DMA
|
||||
bool "Enable SPI3 RX DMA"
|
||||
depends on BSP_USING_SPI3
|
||||
select BSP_SPI3_TX_USING_DMA
|
||||
default n
|
||||
endif
|
||||
|
||||
menuconfig BSP_USING_I2C2
|
||||
bool "Enable I2C2 BUS (software simulation)"
|
||||
default n
|
||||
select RT_USING_I2C
|
||||
select RT_USING_I2C_BITOPS
|
||||
select RT_USING_PIN
|
||||
if BSP_USING_I2C2
|
||||
comment "Notice: PH4 --> 116; PH5 --> 117"
|
||||
config BSP_I2C2_SCL_PIN
|
||||
int "i2c2 scl pin number"
|
||||
range 1 143
|
||||
default 116
|
||||
config BSP_I2C2_SDA_PIN
|
||||
int "I2C2 sda pin number"
|
||||
range 1 143
|
||||
default 117
|
||||
endif
|
||||
|
||||
menuconfig BSP_USING_TIM
|
||||
bool "Enable timer"
|
||||
default n
|
||||
select RT_USING_HWTIMER
|
||||
if BSP_USING_TIM
|
||||
config BSP_USING_TIM11
|
||||
bool "Enable TIM11"
|
||||
default n
|
||||
|
||||
config BSP_USING_TIM13
|
||||
bool "Enable TIM13"
|
||||
default n
|
||||
|
||||
config BSP_USING_TIM14
|
||||
bool "Enable TIM14"
|
||||
default n
|
||||
endif
|
||||
|
||||
menuconfig BSP_USING_PWM
|
||||
bool "Enable pwm"
|
||||
default n
|
||||
select RT_USING_PWM
|
||||
if BSP_USING_PWM
|
||||
menuconfig BSP_USING_PWM10
|
||||
bool "Enable timer10 output pwm"
|
||||
default n
|
||||
if BSP_USING_PWM10
|
||||
config BSP_USING_PWM10_CH1
|
||||
bool "Enable PWM10 channel1"
|
||||
default n
|
||||
endif
|
||||
endif
|
||||
|
||||
menuconfig BSP_USING_ADC
|
||||
bool "Enable ADC"
|
||||
default n
|
||||
select RT_USING_ADC
|
||||
if BSP_USING_ADC
|
||||
config BSP_USING_ADC1
|
||||
bool "Enable ADC1"
|
||||
default n
|
||||
endif
|
||||
|
||||
menuconfig BSP_USING_ONCHIP_RTC
|
||||
bool "Enable RTC"
|
||||
select RT_USING_RTC
|
||||
select RT_USING_LIBC
|
||||
default n
|
||||
if BSP_USING_ONCHIP_RTC
|
||||
choice
|
||||
prompt "Select clock source"
|
||||
default BSP_RTC_USING_LSE
|
||||
|
||||
config BSP_RTC_USING_LSE
|
||||
bool "RTC USING LSE"
|
||||
|
||||
config BSP_RTC_USING_LSI
|
||||
bool "RTC USING LSI"
|
||||
endchoice
|
||||
endif
|
||||
|
||||
config BSP_USING_WDT
|
||||
bool "Enable Watchdog Timer"
|
||||
select RT_USING_WDT
|
||||
default n
|
||||
|
||||
config BSP_USING_SDIO
|
||||
bool "Enable SDIO"
|
||||
select RT_USING_SDIO
|
||||
select RT_USING_DFS
|
||||
default n
|
||||
|
||||
source "../libraries/HAL_Drivers/Kconfig"
|
||||
|
||||
endmenu
|
||||
|
||||
menu "Board extended module Drivers"
|
||||
|
||||
endmenu
|
||||
|
||||
endmenu
|
||||
|
|
@ -0,0 +1,44 @@
|
|||
import os
|
||||
import rtconfig
|
||||
from building import *
|
||||
|
||||
Import('SDK_LIB')
|
||||
|
||||
cwd = GetCurrentDir()
|
||||
|
||||
# add general drivers
|
||||
src = Split('''
|
||||
board.c
|
||||
CubeMX_Config/Src/stm32f4xx_hal_msp.c
|
||||
''')
|
||||
|
||||
if GetDepend(['BSP_USING_SPI_FLASH']):
|
||||
src += Glob('ports/spi_flash_init.c')
|
||||
|
||||
if GetDepend(['BSP_USING_SDCARD']):
|
||||
src += Glob('ports/sdcard_port.c')
|
||||
|
||||
path = [cwd]
|
||||
path += [cwd + '/CubeMX_Config/Inc']
|
||||
path += [cwd + '/ports']
|
||||
|
||||
startup_path_prefix = SDK_LIB
|
||||
|
||||
if rtconfig.CROSS_TOOL == 'gcc':
|
||||
src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/startup_stm32f407xx.s']
|
||||
elif rtconfig.CROSS_TOOL == 'keil':
|
||||
src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/arm/startup_stm32f407xx.s']
|
||||
elif rtconfig.CROSS_TOOL == 'iar':
|
||||
src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/iar/startup_stm32f407xx.s']
|
||||
|
||||
# STM32F405xx) || STM32F415xx) || STM32F407xx) || STM32F417xx)
|
||||
# STM32F427xx) || STM32F437xx) || STM32F429xx) || STM32F439xx)
|
||||
# STM32F401xC) || STM32F401xE) || STM32F410Tx) || STM32F410Cx)
|
||||
# STM32F410Rx) || STM32F411xE) || STM32F446xx) || STM32F469xx)
|
||||
# STM32F479xx) || STM32F412Cx) || STM32F412Rx) || STM32F412Vx)
|
||||
# STM32F412Zx) || STM32F413xx) || STM32F423xx)
|
||||
# You can select chips from the list above
|
||||
CPPDEFINES = ['STM32F407xx']
|
||||
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
|
||||
|
||||
Return('group')
|
||||
|
|
@ -0,0 +1,61 @@
|
|||
/*
|
||||
* Copyright (c) 2006-2018, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2020-07-13 Dozingfiretruck first version
|
||||
*/
|
||||
|
||||
#include "board.h"
|
||||
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
|
||||
|
||||
/** Configure the main internal regulator output voltage
|
||||
*/
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
/** Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE
|
||||
|RCC_OSCILLATORTYPE_LSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
|
||||
RCC_OscInitStruct.LSIState = RCC_LSI_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 25;
|
||||
RCC_OscInitStruct.PLL.PLLN = 336;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 7;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/** Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_I2S|RCC_PERIPHCLK_RTC;
|
||||
PeriphClkInitStruct.PLLI2S.PLLI2SN = 192;
|
||||
PeriphClkInitStruct.PLLI2S.PLLI2SR = 2;
|
||||
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,50 @@
|
|||
/*
|
||||
* Copyright (c) 2006-2018, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2020-07-13 Dozingfiretruck first version
|
||||
*/
|
||||
|
||||
#ifndef __BOARD_H__
|
||||
#define __BOARD_H__
|
||||
|
||||
#include <rtthread.h>
|
||||
#include <stm32f4xx.h>
|
||||
#include "drv_common.h"
|
||||
#include "drv_gpio.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#define STM32_FLASH_START_ADRESS ((uint32_t)0x08000000)
|
||||
#define STM32_FLASH_SIZE (1024 * 1024)
|
||||
#define STM32_FLASH_END_ADDRESS ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE))
|
||||
|
||||
#define STM32_SRAM_SIZE 128
|
||||
#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024)
|
||||
|
||||
#if defined(__CC_ARM) || defined(__CLANG_ARM)
|
||||
extern int Image$$RW_IRAM1$$ZI$$Limit;
|
||||
#define HEAP_BEGIN (&Image$$RW_IRAM1$$ZI$$Limit)
|
||||
#elif __ICCARM__
|
||||
#pragma section="CSTACK"
|
||||
#define HEAP_BEGIN (__segment_end("CSTACK"))
|
||||
#else
|
||||
extern int __bss_end;
|
||||
#define HEAP_BEGIN (&__bss_end)
|
||||
#endif
|
||||
|
||||
#define HEAP_END STM32_SRAM_END
|
||||
|
||||
void SystemClock_Config(void);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
|
|
@ -0,0 +1,28 @@
|
|||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x0400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x0000;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite, last block CSTACK};
|
||||
|
|
@ -0,0 +1,157 @@
|
|||
/*
|
||||
* linker script for STM32F4xx with GNU ld
|
||||
* bernard.xiong 2009-10-14
|
||||
*/
|
||||
|
||||
/* Program Entry, set to mark it as "used" and avoid gc */
|
||||
MEMORY
|
||||
{
|
||||
ROM (rx) : ORIGIN = 0x08000000, LENGTH = 1024k /* 1024KB flash */
|
||||
RAM (rw) : ORIGIN = 0x20000000, LENGTH = 128k /* 128KB sram */
|
||||
}
|
||||
ENTRY(Reset_Handler)
|
||||
_system_stack_size = 0x200;
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_stext = .;
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
|
||||
. = ALIGN(4);
|
||||
*(.text) /* remaining code */
|
||||
*(.text.*) /* remaining code */
|
||||
*(.rodata) /* read-only data (constants) */
|
||||
*(.rodata*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.gnu.linkonce.t*)
|
||||
|
||||
/* section information for finsh shell */
|
||||
. = ALIGN(4);
|
||||
__fsymtab_start = .;
|
||||
KEEP(*(FSymTab))
|
||||
__fsymtab_end = .;
|
||||
|
||||
. = ALIGN(4);
|
||||
__vsymtab_start = .;
|
||||
KEEP(*(VSymTab))
|
||||
__vsymtab_end = .;
|
||||
|
||||
/* section information for initial. */
|
||||
. = ALIGN(4);
|
||||
__rt_init_start = .;
|
||||
KEEP(*(SORT(.rti_fn*)))
|
||||
__rt_init_end = .;
|
||||
|
||||
. = ALIGN(4);
|
||||
|
||||
PROVIDE(__ctors_start__ = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array))
|
||||
PROVIDE(__ctors_end__ = .);
|
||||
|
||||
. = ALIGN(4);
|
||||
|
||||
_etext = .;
|
||||
} > ROM = 0
|
||||
|
||||
/* .ARM.exidx is sorted, so has to go in its own output section. */
|
||||
__exidx_start = .;
|
||||
.ARM.exidx :
|
||||
{
|
||||
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
|
||||
|
||||
/* This is used by the startup in order to initialize the .data secion */
|
||||
_sidata = .;
|
||||
} > ROM
|
||||
__exidx_end = .;
|
||||
|
||||
/* .data section which is used for initialized data */
|
||||
|
||||
.data : AT (_sidata)
|
||||
{
|
||||
. = ALIGN(4);
|
||||
/* This is used by the startup in order to initialize the .data secion */
|
||||
_sdata = . ;
|
||||
|
||||
*(.data)
|
||||
*(.data.*)
|
||||
*(.gnu.linkonce.d*)
|
||||
|
||||
PROVIDE(__dtors_start__ = .);
|
||||
KEEP(*(SORT(.dtors.*)))
|
||||
KEEP(*(.dtors))
|
||||
PROVIDE(__dtors_end__ = .);
|
||||
|
||||
. = ALIGN(4);
|
||||
/* This is used by the startup in order to initialize the .data secion */
|
||||
_edata = . ;
|
||||
} >RAM
|
||||
|
||||
.stack :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sstack = .;
|
||||
. = . + _system_stack_size;
|
||||
. = ALIGN(4);
|
||||
_estack = .;
|
||||
} >RAM
|
||||
|
||||
__bss_start = .;
|
||||
.bss :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
/* This is used by the startup in order to initialize the .bss secion */
|
||||
_sbss = .;
|
||||
|
||||
*(.bss)
|
||||
*(.bss.*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
/* This is used by the startup in order to initialize the .bss secion */
|
||||
_ebss = . ;
|
||||
|
||||
*(.bss.init)
|
||||
} > RAM
|
||||
__bss_end = .;
|
||||
|
||||
_end = .;
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
/* DWARF debug sections.
|
||||
* Symbols in the DWARF debugging sections are relative to the beginning
|
||||
* of the section so we begin them at 0. */
|
||||
/* DWARF 1 */
|
||||
.debug 0 : { *(.debug) }
|
||||
.line 0 : { *(.line) }
|
||||
/* GNU DWARF 1 extensions */
|
||||
.debug_srcinfo 0 : { *(.debug_srcinfo) }
|
||||
.debug_sfnames 0 : { *(.debug_sfnames) }
|
||||
/* DWARF 1.1 and DWARF 2 */
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
/* DWARF 2 */
|
||||
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_frame 0 : { *(.debug_frame) }
|
||||
.debug_str 0 : { *(.debug_str) }
|
||||
.debug_loc 0 : { *(.debug_loc) }
|
||||
.debug_macinfo 0 : { *(.debug_macinfo) }
|
||||
/* SGI/MIPS DWARF 2 extensions */
|
||||
.debug_weaknames 0 : { *(.debug_weaknames) }
|
||||
.debug_funcnames 0 : { *(.debug_funcnames) }
|
||||
.debug_typenames 0 : { *(.debug_typenames) }
|
||||
.debug_varnames 0 : { *(.debug_varnames) }
|
||||
}
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
; *************************************************************
|
||||
; *** Scatter-Loading Description File generated by uVision ***
|
||||
; *************************************************************
|
||||
|
||||
LR_IROM1 0x08000000 0x00100000 { ; load region size_region
|
||||
ER_IROM1 0x08000000 0x00100000 { ; load address = execution address
|
||||
*.o (RESET, +First)
|
||||
*(InRoot$$Sections)
|
||||
.ANY (+RO)
|
||||
}
|
||||
RW_IRAM1 0x20000000 0x00020000 { ; RW data
|
||||
.ANY (+RW +ZI)
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -0,0 +1,48 @@
|
|||
/*
|
||||
* Copyright (c) 2006-2018, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2020-07-13 Dozingfiretruck first version
|
||||
*/
|
||||
|
||||
#ifndef _FAL_CFG_H_
|
||||
#define _FAL_CFG_H_
|
||||
|
||||
#include <rtthread.h>
|
||||
#include <board.h>
|
||||
|
||||
#define FLASH_SIZE_GRANULARITY_16K (4 * 16 * 1024)
|
||||
#define FLASH_SIZE_GRANULARITY_64K (64 * 1024)
|
||||
#define FLASH_SIZE_GRANULARITY_128K (7 * 128 * 1024)
|
||||
|
||||
#define STM32_FLASH_START_ADRESS_16K STM32_FLASH_START_ADRESS
|
||||
#define STM32_FLASH_START_ADRESS_64K (STM32_FLASH_START_ADRESS_16K + FLASH_SIZE_GRANULARITY_16K)
|
||||
#define STM32_FLASH_START_ADRESS_128K (STM32_FLASH_START_ADRESS_64K + FLASH_SIZE_GRANULARITY_64K)
|
||||
|
||||
extern const struct fal_flash_dev stm32_onchip_flash_16k;
|
||||
extern const struct fal_flash_dev stm32_onchip_flash_64k;
|
||||
extern const struct fal_flash_dev stm32_onchip_flash_128k;
|
||||
|
||||
/* flash device table */
|
||||
#define FAL_FLASH_DEV_TABLE \
|
||||
{ \
|
||||
&stm32_onchip_flash_16k, \
|
||||
&stm32_onchip_flash_64k, \
|
||||
&stm32_onchip_flash_128k, \
|
||||
}
|
||||
/* ====================== Partition Configuration ========================== */
|
||||
#ifdef FAL_PART_HAS_TABLE_CFG
|
||||
|
||||
/* partition table */
|
||||
#define FAL_PART_TABLE \
|
||||
{ \
|
||||
{FAL_PART_MAGIC_WROD, "bootloader", "onchip_flash_16k", 0 , FLASH_SIZE_GRANULARITY_16K , 0}, \
|
||||
{FAL_PART_MAGIC_WROD, "param", "onchip_flash_64k", 0 , FLASH_SIZE_GRANULARITY_64K , 0}, \
|
||||
{FAL_PART_MAGIC_WROD, "app", "onchip_flash_128k", 0 , FLASH_SIZE_GRANULARITY_128K, 0}, \
|
||||
}
|
||||
|
||||
#endif /* FAL_PART_HAS_TABLE_CFG */
|
||||
#endif /* _FAL_CFG_H_ */
|
||||
|
|
@ -0,0 +1,62 @@
|
|||
/*
|
||||
* Copyright (c) 2006-2018, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2020-07-13 Dozingfiretruck first version
|
||||
*/
|
||||
|
||||
#include <rtthread.h>
|
||||
|
||||
#ifdef BSP_USING_SDCARD
|
||||
|
||||
#include <dfs_elm.h>
|
||||
#include <dfs_fs.h>
|
||||
#include <dfs_posix.h>
|
||||
|
||||
#define DBG_TAG "app.card"
|
||||
#define DBG_LVL DBG_INFO
|
||||
#include <rtdbg.h>
|
||||
|
||||
void sd_mount(void *parameter)
|
||||
{
|
||||
while (1)
|
||||
{
|
||||
rt_thread_mdelay(500);
|
||||
if(rt_device_find("sd0") != RT_NULL)
|
||||
{
|
||||
if (dfs_mount("sd0", "/", "elm", 0, 0) == RT_EOK)
|
||||
{
|
||||
LOG_I("sd card mount to '/'");
|
||||
break;
|
||||
}
|
||||
else
|
||||
{
|
||||
LOG_W("sd card mount to '/' failed!");
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
int stm32_sdcard_mount(void)
|
||||
{
|
||||
rt_thread_t tid;
|
||||
|
||||
tid = rt_thread_create("sd_mount", sd_mount, RT_NULL,
|
||||
1024, RT_THREAD_PRIORITY_MAX - 2, 20);
|
||||
if (tid != RT_NULL)
|
||||
{
|
||||
rt_thread_startup(tid);
|
||||
}
|
||||
else
|
||||
{
|
||||
LOG_E("create sd_mount thread err!");
|
||||
}
|
||||
return RT_EOK;
|
||||
}
|
||||
INIT_APP_EXPORT(stm32_sdcard_mount);
|
||||
|
||||
#endif /* BSP_USING_SDCARD */
|
||||
|
||||
|
|
@ -0,0 +1,31 @@
|
|||
/*
|
||||
* Copyright (c) 2006-2018, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2020-07-13 Dozingfiretruck first version
|
||||
*/
|
||||
|
||||
#include <rtthread.h>
|
||||
#include "spi_flash.h"
|
||||
#include "spi_flash_sfud.h"
|
||||
#include "drv_spi.h"
|
||||
|
||||
#if defined(BSP_USING_SPI_FLASH)
|
||||
static int rt_hw_spi_flash_init(void)
|
||||
{
|
||||
__HAL_RCC_GPIOF_CLK_ENABLE();
|
||||
rt_hw_spi_device_attach("spi3", "spi30", GPIOF, GPIO_PIN_8);
|
||||
|
||||
if (RT_NULL == rt_sfud_flash_probe("W25Q64", "spi30"))
|
||||
{
|
||||
return -RT_ERROR;
|
||||
};
|
||||
|
||||
return RT_EOK;
|
||||
}
|
||||
INIT_COMPONENT_EXPORT(rt_hw_spi_flash_init);
|
||||
#endif
|
||||
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 395 KiB |
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,10 @@
|
|||
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||
|
||||
<workspace>
|
||||
<project>
|
||||
<path>$WS_DIR$\project.ewp</path>
|
||||
</project>
|
||||
<batchBuild/>
|
||||
</workspace>
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,162 @@
|
|||
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||
<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
|
||||
|
||||
<SchemaVersion>1.0</SchemaVersion>
|
||||
|
||||
<Header>### uVision Project, (C) Keil Software</Header>
|
||||
|
||||
<Extensions>
|
||||
<cExt>*.c</cExt>
|
||||
<aExt>*.s*; *.src; *.a*</aExt>
|
||||
<oExt>*.obj</oExt>
|
||||
<lExt>*.lib</lExt>
|
||||
<tExt>*.txt; *.h; *.inc</tExt>
|
||||
<pExt>*.plm</pExt>
|
||||
<CppX>*.cpp</CppX>
|
||||
</Extensions>
|
||||
|
||||
<DaveTm>
|
||||
<dwLowDateTime>0</dwLowDateTime>
|
||||
<dwHighDateTime>0</dwHighDateTime>
|
||||
</DaveTm>
|
||||
|
||||
<Target>
|
||||
<TargetName>rt-thread</TargetName>
|
||||
<ToolsetNumber>0x4</ToolsetNumber>
|
||||
<ToolsetName>ARM-ADS</ToolsetName>
|
||||
<TargetOption>
|
||||
<CLKADS>25000000</CLKADS>
|
||||
<OPTTT>
|
||||
<gFlags>1</gFlags>
|
||||
<BeepAtEnd>1</BeepAtEnd>
|
||||
<RunSim>1</RunSim>
|
||||
<RunTarget>0</RunTarget>
|
||||
</OPTTT>
|
||||
<OPTHX>
|
||||
<HexSelection>1</HexSelection>
|
||||
<FlashByte>65535</FlashByte>
|
||||
<HexRangeLowAddress>0</HexRangeLowAddress>
|
||||
<HexRangeHighAddress>0</HexRangeHighAddress>
|
||||
<HexOffset>0</HexOffset>
|
||||
</OPTHX>
|
||||
<OPTLEX>
|
||||
<PageWidth>79</PageWidth>
|
||||
<PageLength>66</PageLength>
|
||||
<TabStop>8</TabStop>
|
||||
<ListingPath>.\build\keil\List\</ListingPath>
|
||||
</OPTLEX>
|
||||
<ListingPage>
|
||||
<CreateCListing>1</CreateCListing>
|
||||
<CreateAListing>1</CreateAListing>
|
||||
<CreateLListing>1</CreateLListing>
|
||||
<CreateIListing>0</CreateIListing>
|
||||
<AsmCond>1</AsmCond>
|
||||
<AsmSymb>1</AsmSymb>
|
||||
<AsmXref>0</AsmXref>
|
||||
<CCond>1</CCond>
|
||||
<CCode>0</CCode>
|
||||
<CListInc>0</CListInc>
|
||||
<CSymb>0</CSymb>
|
||||
<LinkerCodeListing>0</LinkerCodeListing>
|
||||
</ListingPage>
|
||||
<OPTXL>
|
||||
<LMap>1</LMap>
|
||||
<LComments>1</LComments>
|
||||
<LGenerateSymbols>1</LGenerateSymbols>
|
||||
<LLibSym>1</LLibSym>
|
||||
<LLines>1</LLines>
|
||||
<LLocSym>1</LLocSym>
|
||||
<LPubSym>1</LPubSym>
|
||||
<LXref>0</LXref>
|
||||
<LExpSel>0</LExpSel>
|
||||
</OPTXL>
|
||||
<OPTFL>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<IsCurrentTarget>1</IsCurrentTarget>
|
||||
</OPTFL>
|
||||
<CpuCode>255</CpuCode>
|
||||
<DebugOpt>
|
||||
<uSim>0</uSim>
|
||||
<uTrg>1</uTrg>
|
||||
<sLdApp>1</sLdApp>
|
||||
<sGomain>1</sGomain>
|
||||
<sRbreak>1</sRbreak>
|
||||
<sRwatch>1</sRwatch>
|
||||
<sRmem>1</sRmem>
|
||||
<sRfunc>1</sRfunc>
|
||||
<sRbox>1</sRbox>
|
||||
<tLdApp>1</tLdApp>
|
||||
<tGomain>1</tGomain>
|
||||
<tRbreak>1</tRbreak>
|
||||
<tRwatch>1</tRwatch>
|
||||
<tRmem>1</tRmem>
|
||||
<tRfunc>0</tRfunc>
|
||||
<tRbox>1</tRbox>
|
||||
<tRtrace>0</tRtrace>
|
||||
<sRSysVw>1</sRSysVw>
|
||||
<tRSysVw>1</tRSysVw>
|
||||
<tPdscDbg>0</tPdscDbg>
|
||||
<sRunDeb>0</sRunDeb>
|
||||
<sLrtime>0</sLrtime>
|
||||
<nTsel>6</nTsel>
|
||||
<sDll></sDll>
|
||||
<sDllPa></sDllPa>
|
||||
<sDlgDll></sDlgDll>
|
||||
<sDlgPa></sDlgPa>
|
||||
<sIfile></sIfile>
|
||||
<tDll></tDll>
|
||||
<tDllPa></tDllPa>
|
||||
<tDlgDll></tDlgDll>
|
||||
<tDlgPa></tDlgPa>
|
||||
<tIfile></tIfile>
|
||||
<pMon>Segger\JL2CM3.dll</pMon>
|
||||
</DebugOpt>
|
||||
<TargetDriverDllRegistry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>JL2CM3</Key>
|
||||
<Name>-U30000299 -O207 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000</Name>
|
||||
</SetRegEntry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>UL2CM3</Key>
|
||||
<Name>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</Name>
|
||||
</SetRegEntry>
|
||||
</TargetDriverDllRegistry>
|
||||
<Breakpoint/>
|
||||
<Tracepoint>
|
||||
<THDelay>0</THDelay>
|
||||
</Tracepoint>
|
||||
<DebugFlag>
|
||||
<trace>0</trace>
|
||||
<periodic>0</periodic>
|
||||
<aLwin>0</aLwin>
|
||||
<aCover>0</aCover>
|
||||
<aSer1>0</aSer1>
|
||||
<aSer2>0</aSer2>
|
||||
<aPa>0</aPa>
|
||||
<viewmode>0</viewmode>
|
||||
<vrSel>0</vrSel>
|
||||
<aSym>0</aSym>
|
||||
<aTbox>0</aTbox>
|
||||
<AscS1>0</AscS1>
|
||||
<AscS2>0</AscS2>
|
||||
<AscS3>0</AscS3>
|
||||
<aSer3>0</aSer3>
|
||||
<eProf>0</eProf>
|
||||
<aLa>0</aLa>
|
||||
<aPa1>0</aPa1>
|
||||
<AscS4>0</AscS4>
|
||||
<aSer4>0</aSer4>
|
||||
<StkLoc>0</StkLoc>
|
||||
<TrcWin>0</TrcWin>
|
||||
<newCpu>0</newCpu>
|
||||
<uProt>0</uProt>
|
||||
</DebugFlag>
|
||||
<LintExecutable></LintExecutable>
|
||||
<LintConfigFile></LintConfigFile>
|
||||
</TargetOption>
|
||||
</Target>
|
||||
|
||||
</ProjectOpt>
|
||||
|
|
@ -0,0 +1,191 @@
|
|||
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||
<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
|
||||
|
||||
<SchemaVersion>1.0</SchemaVersion>
|
||||
|
||||
<Header>### uVision Project, (C) Keil Software</Header>
|
||||
|
||||
<Extensions>
|
||||
<cExt>*.c</cExt>
|
||||
<aExt>*.s*; *.src; *.a*</aExt>
|
||||
<oExt>*.obj; *.o</oExt>
|
||||
<lExt>*.lib</lExt>
|
||||
<tExt>*.txt; *.h; *.inc</tExt>
|
||||
<pExt>*.plm</pExt>
|
||||
<CppX>*.cpp</CppX>
|
||||
<nMigrate>0</nMigrate>
|
||||
</Extensions>
|
||||
|
||||
<DaveTm>
|
||||
<dwLowDateTime>0</dwLowDateTime>
|
||||
<dwHighDateTime>0</dwHighDateTime>
|
||||
</DaveTm>
|
||||
|
||||
<Target>
|
||||
<TargetName>rt-thread</TargetName>
|
||||
<ToolsetNumber>0x4</ToolsetNumber>
|
||||
<ToolsetName>ARM-ADS</ToolsetName>
|
||||
<TargetOption>
|
||||
<CLKADS>12000000</CLKADS>
|
||||
<OPTTT>
|
||||
<gFlags>1</gFlags>
|
||||
<BeepAtEnd>1</BeepAtEnd>
|
||||
<RunSim>0</RunSim>
|
||||
<RunTarget>1</RunTarget>
|
||||
<RunAbUc>0</RunAbUc>
|
||||
</OPTTT>
|
||||
<OPTHX>
|
||||
<HexSelection>1</HexSelection>
|
||||
<FlashByte>65535</FlashByte>
|
||||
<HexRangeLowAddress>0</HexRangeLowAddress>
|
||||
<HexRangeHighAddress>0</HexRangeHighAddress>
|
||||
<HexOffset>0</HexOffset>
|
||||
</OPTHX>
|
||||
<OPTLEX>
|
||||
<PageWidth>79</PageWidth>
|
||||
<PageLength>66</PageLength>
|
||||
<TabStop>8</TabStop>
|
||||
<ListingPath>.\build\keil\List\</ListingPath>
|
||||
</OPTLEX>
|
||||
<ListingPage>
|
||||
<CreateCListing>1</CreateCListing>
|
||||
<CreateAListing>1</CreateAListing>
|
||||
<CreateLListing>1</CreateLListing>
|
||||
<CreateIListing>0</CreateIListing>
|
||||
<AsmCond>1</AsmCond>
|
||||
<AsmSymb>1</AsmSymb>
|
||||
<AsmXref>0</AsmXref>
|
||||
<CCond>1</CCond>
|
||||
<CCode>0</CCode>
|
||||
<CListInc>0</CListInc>
|
||||
<CSymb>0</CSymb>
|
||||
<LinkerCodeListing>0</LinkerCodeListing>
|
||||
</ListingPage>
|
||||
<OPTXL>
|
||||
<LMap>1</LMap>
|
||||
<LComments>1</LComments>
|
||||
<LGenerateSymbols>1</LGenerateSymbols>
|
||||
<LLibSym>1</LLibSym>
|
||||
<LLines>1</LLines>
|
||||
<LLocSym>1</LLocSym>
|
||||
<LPubSym>1</LPubSym>
|
||||
<LXref>0</LXref>
|
||||
<LExpSel>0</LExpSel>
|
||||
</OPTXL>
|
||||
<OPTFL>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<IsCurrentTarget>1</IsCurrentTarget>
|
||||
</OPTFL>
|
||||
<CpuCode>18</CpuCode>
|
||||
<DebugOpt>
|
||||
<uSim>0</uSim>
|
||||
<uTrg>1</uTrg>
|
||||
<sLdApp>1</sLdApp>
|
||||
<sGomain>1</sGomain>
|
||||
<sRbreak>1</sRbreak>
|
||||
<sRwatch>1</sRwatch>
|
||||
<sRmem>1</sRmem>
|
||||
<sRfunc>1</sRfunc>
|
||||
<sRbox>1</sRbox>
|
||||
<tLdApp>1</tLdApp>
|
||||
<tGomain>1</tGomain>
|
||||
<tRbreak>1</tRbreak>
|
||||
<tRwatch>1</tRwatch>
|
||||
<tRmem>1</tRmem>
|
||||
<tRfunc>0</tRfunc>
|
||||
<tRbox>1</tRbox>
|
||||
<tRtrace>1</tRtrace>
|
||||
<sRSysVw>1</sRSysVw>
|
||||
<tRSysVw>1</tRSysVw>
|
||||
<sRunDeb>0</sRunDeb>
|
||||
<sLrtime>0</sLrtime>
|
||||
<bEvRecOn>1</bEvRecOn>
|
||||
<bSchkAxf>0</bSchkAxf>
|
||||
<bTchkAxf>0</bTchkAxf>
|
||||
<nTsel>4</nTsel>
|
||||
<sDll></sDll>
|
||||
<sDllPa></sDllPa>
|
||||
<sDlgDll></sDlgDll>
|
||||
<sDlgPa></sDlgPa>
|
||||
<sIfile></sIfile>
|
||||
<tDll></tDll>
|
||||
<tDllPa></tDllPa>
|
||||
<tDlgDll></tDlgDll>
|
||||
<tDlgPa></tDlgPa>
|
||||
<tIfile></tIfile>
|
||||
<pMon>Segger\JL2CM3.dll</pMon>
|
||||
</DebugOpt>
|
||||
<TargetDriverDllRegistry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>JL2CM3</Key>
|
||||
<Name>-U30000299 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024.FLM -FS08000000 -FL0100000 -FP0($$Device:STM32F407ZGTx$CMSIS\Flash\STM32F4xx_1024.FLM)</Name>
|
||||
</SetRegEntry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>UL2CM3</Key>
|
||||
<Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F407ZGTx$CMSIS\Flash\STM32F4xx_1024.FLM))</Name>
|
||||
</SetRegEntry>
|
||||
</TargetDriverDllRegistry>
|
||||
<Breakpoint/>
|
||||
<Tracepoint>
|
||||
<THDelay>0</THDelay>
|
||||
</Tracepoint>
|
||||
<DebugFlag>
|
||||
<trace>0</trace>
|
||||
<periodic>0</periodic>
|
||||
<aLwin>0</aLwin>
|
||||
<aCover>0</aCover>
|
||||
<aSer1>0</aSer1>
|
||||
<aSer2>0</aSer2>
|
||||
<aPa>0</aPa>
|
||||
<viewmode>0</viewmode>
|
||||
<vrSel>0</vrSel>
|
||||
<aSym>0</aSym>
|
||||
<aTbox>0</aTbox>
|
||||
<AscS1>0</AscS1>
|
||||
<AscS2>0</AscS2>
|
||||
<AscS3>0</AscS3>
|
||||
<aSer3>0</aSer3>
|
||||
<eProf>0</eProf>
|
||||
<aLa>0</aLa>
|
||||
<aPa1>0</aPa1>
|
||||
<AscS4>0</AscS4>
|
||||
<aSer4>0</aSer4>
|
||||
<StkLoc>0</StkLoc>
|
||||
<TrcWin>0</TrcWin>
|
||||
<newCpu>0</newCpu>
|
||||
<uProt>0</uProt>
|
||||
</DebugFlag>
|
||||
<LintExecutable></LintExecutable>
|
||||
<LintConfigFile></LintConfigFile>
|
||||
<bLintAuto>0</bLintAuto>
|
||||
<bAutoGenD>0</bAutoGenD>
|
||||
<LntExFlags>0</LntExFlags>
|
||||
<pMisraName></pMisraName>
|
||||
<pszMrule></pszMrule>
|
||||
<pSingCmds></pSingCmds>
|
||||
<pMultCmds></pMultCmds>
|
||||
<pMisraNamep></pMisraNamep>
|
||||
<pszMrulep></pszMrulep>
|
||||
<pSingCmdsp></pSingCmdsp>
|
||||
<pMultCmdsp></pMultCmdsp>
|
||||
<DebugDescription>
|
||||
<Enable>1</Enable>
|
||||
<EnableLog>0</EnableLog>
|
||||
<Protocol>2</Protocol>
|
||||
<DbgClock>10000000</DbgClock>
|
||||
</DebugDescription>
|
||||
</TargetOption>
|
||||
</Target>
|
||||
|
||||
<Group>
|
||||
<GroupName>Source Group 1</GroupName>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<cbSel>0</cbSel>
|
||||
<RteFlg>0</RteFlg>
|
||||
</Group>
|
||||
|
||||
</ProjectOpt>
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,753 @@
|
|||
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
|
||||
|
||||
<SchemaVersion>2.1</SchemaVersion>
|
||||
|
||||
<Header>### uVision Project, (C) Keil Software</Header>
|
||||
|
||||
<Targets>
|
||||
<Target>
|
||||
<TargetName>rt-thread</TargetName>
|
||||
<ToolsetNumber>0x4</ToolsetNumber>
|
||||
<ToolsetName>ARM-ADS</ToolsetName>
|
||||
<pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
|
||||
<uAC6>0</uAC6>
|
||||
<TargetOption>
|
||||
<TargetCommonOption>
|
||||
<Device>STM32F407IGTx</Device>
|
||||
<Vendor>STMicroelectronics</Vendor>
|
||||
<PackID>Keil.STM32F4xx_DFP.2.14.0</PackID>
|
||||
<PackURL>http://www.keil.com/pack/</PackURL>
|
||||
<Cpu>IRAM(0x20000000,0x00020000) IRAM2(0x10000000,0x00010000) IROM(0x08000000,0x00100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
|
||||
<FlashUtilSpec></FlashUtilSpec>
|
||||
<StartupFile></StartupFile>
|
||||
<FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F407IGTx$CMSIS\Flash\STM32F4xx_1024.FLM))</FlashDriverDll>
|
||||
<DeviceId>0</DeviceId>
|
||||
<RegisterFile>$$Device:STM32F407IGTx$Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h</RegisterFile>
|
||||
<MemoryEnv></MemoryEnv>
|
||||
<Cmp></Cmp>
|
||||
<Asm></Asm>
|
||||
<Linker></Linker>
|
||||
<OHString></OHString>
|
||||
<InfinionOptionDll></InfinionOptionDll>
|
||||
<SLE66CMisc></SLE66CMisc>
|
||||
<SLE66AMisc></SLE66AMisc>
|
||||
<SLE66LinkerMisc></SLE66LinkerMisc>
|
||||
<SFDFile>$$Device:STM32F407IGTx$CMSIS\SVD\STM32F40x.svd</SFDFile>
|
||||
<bCustSvd>0</bCustSvd>
|
||||
<UseEnv>0</UseEnv>
|
||||
<BinPath></BinPath>
|
||||
<IncludePath></IncludePath>
|
||||
<LibPath></LibPath>
|
||||
<RegisterFilePath></RegisterFilePath>
|
||||
<DBRegisterFilePath></DBRegisterFilePath>
|
||||
<TargetStatus>
|
||||
<Error>0</Error>
|
||||
<ExitCodeStop>0</ExitCodeStop>
|
||||
<ButtonStop>0</ButtonStop>
|
||||
<NotGenerated>0</NotGenerated>
|
||||
<InvalidFlash>1</InvalidFlash>
|
||||
</TargetStatus>
|
||||
<OutputDirectory>.\build\keil\Obj\</OutputDirectory>
|
||||
<OutputName>rt-thread</OutputName>
|
||||
<CreateExecutable>1</CreateExecutable>
|
||||
<CreateLib>0</CreateLib>
|
||||
<CreateHexFile>0</CreateHexFile>
|
||||
<DebugInformation>1</DebugInformation>
|
||||
<BrowseInformation>0</BrowseInformation>
|
||||
<ListingPath>.\build\keil\List\</ListingPath>
|
||||
<HexFormatSelection>1</HexFormatSelection>
|
||||
<Merge32K>0</Merge32K>
|
||||
<CreateBatchFile>0</CreateBatchFile>
|
||||
<BeforeCompile>
|
||||
<RunUserProg1>0</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name></UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopU1X>0</nStopU1X>
|
||||
<nStopU2X>0</nStopU2X>
|
||||
</BeforeCompile>
|
||||
<BeforeMake>
|
||||
<RunUserProg1>0</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name></UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopB1X>0</nStopB1X>
|
||||
<nStopB2X>0</nStopB2X>
|
||||
</BeforeMake>
|
||||
<AfterMake>
|
||||
<RunUserProg1>1</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopA1X>0</nStopA1X>
|
||||
<nStopA2X>0</nStopA2X>
|
||||
</AfterMake>
|
||||
<SelectedForBatchBuild>0</SelectedForBatchBuild>
|
||||
<SVCSIdString></SVCSIdString>
|
||||
</TargetCommonOption>
|
||||
<CommonProperty>
|
||||
<UseCPPCompiler>0</UseCPPCompiler>
|
||||
<RVCTCodeConst>0</RVCTCodeConst>
|
||||
<RVCTZI>0</RVCTZI>
|
||||
<RVCTOtherData>0</RVCTOtherData>
|
||||
<ModuleSelection>0</ModuleSelection>
|
||||
<IncludeInBuild>1</IncludeInBuild>
|
||||
<AlwaysBuild>0</AlwaysBuild>
|
||||
<GenerateAssemblyFile>0</GenerateAssemblyFile>
|
||||
<AssembleAssemblyFile>0</AssembleAssemblyFile>
|
||||
<PublicsOnly>0</PublicsOnly>
|
||||
<StopOnExitCode>3</StopOnExitCode>
|
||||
<CustomArgument></CustomArgument>
|
||||
<IncludeLibraryModules></IncludeLibraryModules>
|
||||
<ComprImg>1</ComprImg>
|
||||
</CommonProperty>
|
||||
<DllOption>
|
||||
<SimDllName>SARMCM3.DLL</SimDllName>
|
||||
<SimDllArguments> -REMAP -MPU</SimDllArguments>
|
||||
<SimDlgDll>DCM.DLL</SimDlgDll>
|
||||
<SimDlgDllArguments>-pCM4</SimDlgDllArguments>
|
||||
<TargetDllName>SARMCM3.DLL</TargetDllName>
|
||||
<TargetDllArguments> -MPU</TargetDllArguments>
|
||||
<TargetDlgDll>TCM.DLL</TargetDlgDll>
|
||||
<TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
|
||||
</DllOption>
|
||||
<DebugOption>
|
||||
<OPTHX>
|
||||
<HexSelection>1</HexSelection>
|
||||
<HexRangeLowAddress>0</HexRangeLowAddress>
|
||||
<HexRangeHighAddress>0</HexRangeHighAddress>
|
||||
<HexOffset>0</HexOffset>
|
||||
<Oh166RecLen>16</Oh166RecLen>
|
||||
</OPTHX>
|
||||
</DebugOption>
|
||||
<Utilities>
|
||||
<Flash1>
|
||||
<UseTargetDll>1</UseTargetDll>
|
||||
<UseExternalTool>0</UseExternalTool>
|
||||
<RunIndependent>0</RunIndependent>
|
||||
<UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
|
||||
<Capability>1</Capability>
|
||||
<DriverSelection>4101</DriverSelection>
|
||||
</Flash1>
|
||||
<bUseTDR>1</bUseTDR>
|
||||
<Flash2>STLink\ST-LINKIII-KEIL_SWO.dll</Flash2>
|
||||
<Flash3>"" ()</Flash3>
|
||||
<Flash4></Flash4>
|
||||
<pFcarmOut></pFcarmOut>
|
||||
<pFcarmGrp></pFcarmGrp>
|
||||
<pFcArmRoot></pFcArmRoot>
|
||||
<FcArmLst>0</FcArmLst>
|
||||
</Utilities>
|
||||
<TargetArmAds>
|
||||
<ArmAdsMisc>
|
||||
<GenerateListings>0</GenerateListings>
|
||||
<asHll>1</asHll>
|
||||
<asAsm>1</asAsm>
|
||||
<asMacX>1</asMacX>
|
||||
<asSyms>1</asSyms>
|
||||
<asFals>1</asFals>
|
||||
<asDbgD>1</asDbgD>
|
||||
<asForm>1</asForm>
|
||||
<ldLst>0</ldLst>
|
||||
<ldmm>1</ldmm>
|
||||
<ldXref>1</ldXref>
|
||||
<BigEnd>0</BigEnd>
|
||||
<AdsALst>1</AdsALst>
|
||||
<AdsACrf>1</AdsACrf>
|
||||
<AdsANop>0</AdsANop>
|
||||
<AdsANot>0</AdsANot>
|
||||
<AdsLLst>1</AdsLLst>
|
||||
<AdsLmap>1</AdsLmap>
|
||||
<AdsLcgr>1</AdsLcgr>
|
||||
<AdsLsym>1</AdsLsym>
|
||||
<AdsLszi>1</AdsLszi>
|
||||
<AdsLtoi>1</AdsLtoi>
|
||||
<AdsLsun>1</AdsLsun>
|
||||
<AdsLven>1</AdsLven>
|
||||
<AdsLsxf>1</AdsLsxf>
|
||||
<RvctClst>0</RvctClst>
|
||||
<GenPPlst>0</GenPPlst>
|
||||
<AdsCpuType>"Cortex-M4"</AdsCpuType>
|
||||
<RvctDeviceName></RvctDeviceName>
|
||||
<mOS>0</mOS>
|
||||
<uocRom>0</uocRom>
|
||||
<uocRam>0</uocRam>
|
||||
<hadIROM>1</hadIROM>
|
||||
<hadIRAM>1</hadIRAM>
|
||||
<hadXRAM>0</hadXRAM>
|
||||
<uocXRam>0</uocXRam>
|
||||
<RvdsVP>2</RvdsVP>
|
||||
<RvdsMve>0</RvdsMve>
|
||||
<RvdsCdeCp>0</RvdsCdeCp>
|
||||
<hadIRAM2>1</hadIRAM2>
|
||||
<hadIROM2>0</hadIROM2>
|
||||
<StupSel>8</StupSel>
|
||||
<useUlib>0</useUlib>
|
||||
<EndSel>0</EndSel>
|
||||
<uLtcg>0</uLtcg>
|
||||
<nSecure>0</nSecure>
|
||||
<RoSelD>3</RoSelD>
|
||||
<RwSelD>4</RwSelD>
|
||||
<CodeSel>0</CodeSel>
|
||||
<OptFeed>0</OptFeed>
|
||||
<NoZi1>0</NoZi1>
|
||||
<NoZi2>0</NoZi2>
|
||||
<NoZi3>0</NoZi3>
|
||||
<NoZi4>0</NoZi4>
|
||||
<NoZi5>0</NoZi5>
|
||||
<Ro1Chk>0</Ro1Chk>
|
||||
<Ro2Chk>0</Ro2Chk>
|
||||
<Ro3Chk>0</Ro3Chk>
|
||||
<Ir1Chk>1</Ir1Chk>
|
||||
<Ir2Chk>0</Ir2Chk>
|
||||
<Ra1Chk>0</Ra1Chk>
|
||||
<Ra2Chk>0</Ra2Chk>
|
||||
<Ra3Chk>0</Ra3Chk>
|
||||
<Im1Chk>1</Im1Chk>
|
||||
<Im2Chk>0</Im2Chk>
|
||||
<OnChipMemories>
|
||||
<Ocm1>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm1>
|
||||
<Ocm2>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm2>
|
||||
<Ocm3>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm3>
|
||||
<Ocm4>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm4>
|
||||
<Ocm5>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm5>
|
||||
<Ocm6>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm6>
|
||||
<IRAM>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x20000000</StartAddress>
|
||||
<Size>0x20000</Size>
|
||||
</IRAM>
|
||||
<IROM>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x8000000</StartAddress>
|
||||
<Size>0x100000</Size>
|
||||
</IROM>
|
||||
<XRAM>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</XRAM>
|
||||
<OCR_RVCT1>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT1>
|
||||
<OCR_RVCT2>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT2>
|
||||
<OCR_RVCT3>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT3>
|
||||
<OCR_RVCT4>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x8000000</StartAddress>
|
||||
<Size>0x100000</Size>
|
||||
</OCR_RVCT4>
|
||||
<OCR_RVCT5>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT5>
|
||||
<OCR_RVCT6>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT6>
|
||||
<OCR_RVCT7>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT7>
|
||||
<OCR_RVCT8>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT8>
|
||||
<OCR_RVCT9>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x20000000</StartAddress>
|
||||
<Size>0x20000</Size>
|
||||
</OCR_RVCT9>
|
||||
<OCR_RVCT10>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x10000000</StartAddress>
|
||||
<Size>0x10000</Size>
|
||||
</OCR_RVCT10>
|
||||
</OnChipMemories>
|
||||
<RvctStartVector></RvctStartVector>
|
||||
</ArmAdsMisc>
|
||||
<Cads>
|
||||
<interw>1</interw>
|
||||
<Optim>1</Optim>
|
||||
<oTime>0</oTime>
|
||||
<SplitLS>0</SplitLS>
|
||||
<OneElfS>1</OneElfS>
|
||||
<Strict>0</Strict>
|
||||
<EnumInt>0</EnumInt>
|
||||
<PlainCh>0</PlainCh>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<wLevel>2</wLevel>
|
||||
<uThumb>0</uThumb>
|
||||
<uSurpInc>0</uSurpInc>
|
||||
<uC99>1</uC99>
|
||||
<uGnu>0</uGnu>
|
||||
<useXO>0</useXO>
|
||||
<v6Lang>1</v6Lang>
|
||||
<v6LangP>1</v6LangP>
|
||||
<vShortEn>1</vShortEn>
|
||||
<vShortWch>1</vShortWch>
|
||||
<v6Lto>0</v6Lto>
|
||||
<v6WtE>0</v6WtE>
|
||||
<v6Rtti>0</v6Rtti>
|
||||
<VariousControls>
|
||||
<MiscControls></MiscControls>
|
||||
<Define>USE_HAL_DRIVER, STM32F407xx</Define>
|
||||
<Undefine></Undefine>
|
||||
<IncludePath>.;..\..\..\include;applications;.;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\..\..\components\libc\compilers\common;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\libraries\STM32F4xx_HAL\CMSIS\Include</IncludePath>
|
||||
</VariousControls>
|
||||
</Cads>
|
||||
<Aads>
|
||||
<interw>1</interw>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<thumb>0</thumb>
|
||||
<SplitLS>0</SplitLS>
|
||||
<SwStkChk>0</SwStkChk>
|
||||
<NoWarn>0</NoWarn>
|
||||
<uSurpInc>0</uSurpInc>
|
||||
<useXO>0</useXO>
|
||||
<ClangAsOpt>4</ClangAsOpt>
|
||||
<VariousControls>
|
||||
<MiscControls></MiscControls>
|
||||
<Define></Define>
|
||||
<Undefine></Undefine>
|
||||
<IncludePath></IncludePath>
|
||||
</VariousControls>
|
||||
</Aads>
|
||||
<LDads>
|
||||
<umfTarg>0</umfTarg>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<noStLib>0</noStLib>
|
||||
<RepFail>1</RepFail>
|
||||
<useFile>0</useFile>
|
||||
<TextAddressRange>0x08000000</TextAddressRange>
|
||||
<DataAddressRange>0x20000000</DataAddressRange>
|
||||
<pXoBase></pXoBase>
|
||||
<ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
|
||||
<IncludeLibs></IncludeLibs>
|
||||
<IncludeLibsPath></IncludeLibsPath>
|
||||
<Misc></Misc>
|
||||
<LinkerInputFile></LinkerInputFile>
|
||||
<DisabledWarnings></DisabledWarnings>
|
||||
</LDads>
|
||||
</TargetArmAds>
|
||||
</TargetOption>
|
||||
<Groups>
|
||||
<Group>
|
||||
<GroupName>Kernel</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>clock.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\src\clock.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>components.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\src\components.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>device.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\src\device.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>idle.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\src\idle.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>ipc.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\src\ipc.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>irq.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\src\irq.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>kservice.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\src\kservice.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>mem.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\src\mem.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>mempool.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\src\mempool.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>object.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\src\object.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>scheduler.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\src\scheduler.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>signal.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\src\signal.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>thread.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\src\thread.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>timer.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\src\timer.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>Applications</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>main.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>applications\main.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>Drivers</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>board.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>board\board.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_msp.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>board\CubeMX_Config\Src\stm32f4xx_hal_msp.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>startup_stm32f407xx.s</FileName>
|
||||
<FileType>2</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\arm\startup_stm32f407xx.s</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>drv_gpio.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>drv_usart.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>drv_hwtimer.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\HAL_Drivers\drv_hwtimer.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>drv_common.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>cpu</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>backtrace.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>div0.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>showmem.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>cpuport.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>context_rvds.S</FileName>
|
||||
<FileType>2</FileType>
|
||||
<FilePath>..\..\..\libcpu\arm\cortex-m4\context_rvds.S</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>DeviceDrivers</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>hwtimer.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\components\drivers\hwtimer\hwtimer.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>pin.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>serial.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\components\drivers\serial\serial.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>completion.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>dataqueue.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>pipe.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\components\drivers\src\pipe.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>ringblk_buf.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>ringbuffer.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>waitqueue.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>workqueue.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\components\drivers\src\workqueue.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>finsh</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>shell.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\components\finsh\shell.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>cmd.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\components\finsh\cmd.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>msh.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\components\finsh\msh.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>libc</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>time.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\components\libc\compilers\common\time.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>STM32_HAL</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>system_stm32f4xx.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_cec.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_cortex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_crc.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_cryp.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_cryp_ex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_dma.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_dma_ex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_pwr.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_pwr_ex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_rcc.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_rcc_ex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_rng.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_gpio.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_uart.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_usart.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_tim.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_tim_ex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32f4xx_hal_lptim.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_lptim.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
</Groups>
|
||||
</Target>
|
||||
</Targets>
|
||||
|
||||
<RTE>
|
||||
<apis/>
|
||||
<components/>
|
||||
<files/>
|
||||
</RTE>
|
||||
|
||||
<LayerInfo>
|
||||
<Layers>
|
||||
<Layer>
|
||||
<LayName><Project Info></LayName>
|
||||
<LayDesc></LayDesc>
|
||||
<LayUrl></LayUrl>
|
||||
<LayKeys></LayKeys>
|
||||
<LayCat></LayCat>
|
||||
<LayLic></LayLic>
|
||||
<LayTarg>0</LayTarg>
|
||||
<LayPrjMark>1</LayPrjMark>
|
||||
</Layer>
|
||||
</Layers>
|
||||
</LayerInfo>
|
||||
|
||||
</Project>
|
||||
|
|
@ -0,0 +1,173 @@
|
|||
#ifndef RT_CONFIG_H__
|
||||
#define RT_CONFIG_H__
|
||||
|
||||
/* Automatically generated file; DO NOT EDIT. */
|
||||
/* RT-Thread Configuration */
|
||||
|
||||
/* RT-Thread Kernel */
|
||||
|
||||
#define RT_NAME_MAX 8
|
||||
#define RT_ALIGN_SIZE 4
|
||||
#define RT_THREAD_PRIORITY_32
|
||||
#define RT_THREAD_PRIORITY_MAX 32
|
||||
#define RT_TICK_PER_SECOND 1000
|
||||
#define RT_USING_OVERFLOW_CHECK
|
||||
#define RT_USING_HOOK
|
||||
#define RT_USING_IDLE_HOOK
|
||||
#define RT_IDLE_HOOK_LIST_SIZE 4
|
||||
#define IDLE_THREAD_STACK_SIZE 256
|
||||
#define RT_DEBUG
|
||||
#define RT_DEBUG_COLOR
|
||||
|
||||
/* Inter-Thread communication */
|
||||
|
||||
#define RT_USING_SEMAPHORE
|
||||
#define RT_USING_MUTEX
|
||||
#define RT_USING_EVENT
|
||||
#define RT_USING_MAILBOX
|
||||
#define RT_USING_MESSAGEQUEUE
|
||||
|
||||
/* Memory Management */
|
||||
|
||||
#define RT_USING_MEMPOOL
|
||||
#define RT_USING_SMALL_MEM
|
||||
#define RT_USING_HEAP
|
||||
|
||||
/* Kernel Device Object */
|
||||
|
||||
#define RT_USING_DEVICE
|
||||
#define RT_USING_CONSOLE
|
||||
#define RT_CONSOLEBUF_SIZE 128
|
||||
#define RT_CONSOLE_DEVICE_NAME "uart1"
|
||||
#define RT_VER_NUM 0x40000
|
||||
#define ARCH_ARM
|
||||
#define ARCH_ARM_CORTEX_M
|
||||
#define ARCH_ARM_CORTEX_M4
|
||||
|
||||
/* RT-Thread Components */
|
||||
|
||||
#define RT_USING_COMPONENTS_INIT
|
||||
#define RT_USING_USER_MAIN
|
||||
#define RT_MAIN_THREAD_STACK_SIZE 2048
|
||||
#define RT_MAIN_THREAD_PRIORITY 10
|
||||
|
||||
/* C++ features */
|
||||
|
||||
|
||||
/* Command shell */
|
||||
|
||||
#define RT_USING_FINSH
|
||||
#define FINSH_THREAD_NAME "tshell"
|
||||
#define FINSH_USING_HISTORY
|
||||
#define FINSH_HISTORY_LINES 5
|
||||
#define FINSH_USING_SYMTAB
|
||||
#define FINSH_USING_DESCRIPTION
|
||||
#define FINSH_THREAD_PRIORITY 20
|
||||
#define FINSH_THREAD_STACK_SIZE 4096
|
||||
#define FINSH_CMD_SIZE 80
|
||||
#define FINSH_USING_MSH
|
||||
#define FINSH_USING_MSH_DEFAULT
|
||||
#define FINSH_USING_MSH_ONLY
|
||||
#define FINSH_ARG_MAX 10
|
||||
|
||||
/* Device virtual file system */
|
||||
|
||||
|
||||
/* Device Drivers */
|
||||
|
||||
#define RT_USING_DEVICE_IPC
|
||||
#define RT_PIPE_BUFSZ 512
|
||||
#define RT_USING_SERIAL
|
||||
#define RT_SERIAL_USING_DMA
|
||||
#define RT_USING_PIN
|
||||
|
||||
/* Using WiFi */
|
||||
|
||||
|
||||
/* Using USB */
|
||||
|
||||
|
||||
/* POSIX layer and C standard library */
|
||||
|
||||
|
||||
/* Network */
|
||||
|
||||
/* Socket abstraction layer */
|
||||
|
||||
|
||||
/* light weight TCP/IP stack */
|
||||
|
||||
|
||||
/* Modbus master and slave stack */
|
||||
|
||||
|
||||
/* AT commands */
|
||||
|
||||
|
||||
/* VBUS(Virtual Software BUS) */
|
||||
|
||||
|
||||
/* Utilities */
|
||||
|
||||
|
||||
/* ARM CMSIS */
|
||||
|
||||
|
||||
/* RT-Thread online packages */
|
||||
|
||||
/* IoT - internet of things */
|
||||
|
||||
|
||||
/* Wi-Fi */
|
||||
|
||||
/* Marvell WiFi */
|
||||
|
||||
|
||||
/* Wiced WiFi */
|
||||
|
||||
|
||||
/* IoT Cloud */
|
||||
|
||||
|
||||
/* security packages */
|
||||
|
||||
|
||||
/* language packages */
|
||||
|
||||
|
||||
/* multimedia packages */
|
||||
|
||||
|
||||
/* tools packages */
|
||||
|
||||
|
||||
/* system packages */
|
||||
|
||||
|
||||
/* peripheral libraries and drivers */
|
||||
|
||||
|
||||
/* miscellaneous packages */
|
||||
|
||||
|
||||
/* samples: kernel and components samples */
|
||||
|
||||
#define SOC_FAMILY_STM32
|
||||
#define SOC_SERIES_STM32F4
|
||||
|
||||
/* Hardware Drivers Config */
|
||||
|
||||
#define SOC_STM32F407ZG
|
||||
|
||||
/* Onboard Peripheral Drivers */
|
||||
|
||||
/* On-chip Peripheral Drivers */
|
||||
|
||||
#define BSP_USING_GPIO
|
||||
#define BSP_USING_UART
|
||||
#define BSP_USING_UART1
|
||||
|
||||
/* Board extended module Drivers */
|
||||
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,150 @@
|
|||
import os
|
||||
|
||||
# toolchains options
|
||||
ARCH='arm'
|
||||
CPU='cortex-m4'
|
||||
CROSS_TOOL='gcc'
|
||||
|
||||
# bsp lib config
|
||||
BSP_LIBRARY_TYPE = None
|
||||
|
||||
if os.getenv('RTT_CC'):
|
||||
CROSS_TOOL = os.getenv('RTT_CC')
|
||||
if os.getenv('RTT_ROOT'):
|
||||
RTT_ROOT = os.getenv('RTT_ROOT')
|
||||
|
||||
# cross_tool provides the cross compiler
|
||||
# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
|
||||
if CROSS_TOOL == 'gcc':
|
||||
PLATFORM = 'gcc'
|
||||
EXEC_PATH = r'C:\Users\XXYYZZ'
|
||||
elif CROSS_TOOL == 'keil':
|
||||
PLATFORM = 'armcc'
|
||||
EXEC_PATH = r'C:/Keil_v5'
|
||||
elif CROSS_TOOL == 'iar':
|
||||
PLATFORM = 'iar'
|
||||
EXEC_PATH = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.0'
|
||||
|
||||
if os.getenv('RTT_EXEC_PATH'):
|
||||
EXEC_PATH = os.getenv('RTT_EXEC_PATH')
|
||||
|
||||
BUILD = 'debug'
|
||||
|
||||
if PLATFORM == 'gcc':
|
||||
# toolchains
|
||||
PREFIX = 'arm-none-eabi-'
|
||||
CC = PREFIX + 'gcc'
|
||||
AS = PREFIX + 'gcc'
|
||||
AR = PREFIX + 'ar'
|
||||
CXX = PREFIX + 'g++'
|
||||
LINK = PREFIX + 'gcc'
|
||||
TARGET_EXT = 'elf'
|
||||
SIZE = PREFIX + 'size'
|
||||
OBJDUMP = PREFIX + 'objdump'
|
||||
OBJCPY = PREFIX + 'objcopy'
|
||||
|
||||
DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections'
|
||||
CFLAGS = DEVICE + ' -Dgcc'
|
||||
AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb '
|
||||
LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rt-thread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds'
|
||||
|
||||
CPATH = ''
|
||||
LPATH = ''
|
||||
|
||||
if BUILD == 'debug':
|
||||
CFLAGS += ' -O0 -gdwarf-2 -g'
|
||||
AFLAGS += ' -gdwarf-2'
|
||||
else:
|
||||
CFLAGS += ' -O2'
|
||||
|
||||
CXXFLAGS = CFLAGS
|
||||
|
||||
POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
|
||||
|
||||
elif PLATFORM == 'armcc':
|
||||
# toolchains
|
||||
CC = 'armcc'
|
||||
CXX = 'armcc'
|
||||
AS = 'armasm'
|
||||
AR = 'armar'
|
||||
LINK = 'armlink'
|
||||
TARGET_EXT = 'axf'
|
||||
|
||||
DEVICE = ' --cpu Cortex-M4.fp '
|
||||
CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99'
|
||||
AFLAGS = DEVICE + ' --apcs=interwork '
|
||||
LFLAGS = DEVICE + ' --scatter "board\linker_scripts\link.sct" --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict'
|
||||
CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include'
|
||||
LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib'
|
||||
|
||||
CFLAGS += ' -D__MICROLIB '
|
||||
AFLAGS += ' --pd "__MICROLIB SETA 1" '
|
||||
LFLAGS += ' --library_type=microlib '
|
||||
EXEC_PATH += '/ARM/ARMCC/bin/'
|
||||
|
||||
if BUILD == 'debug':
|
||||
CFLAGS += ' -g -O0'
|
||||
AFLAGS += ' -g'
|
||||
else:
|
||||
CFLAGS += ' -O2'
|
||||
|
||||
CXXFLAGS = CFLAGS
|
||||
CFLAGS += ' -std=c99'
|
||||
|
||||
POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
|
||||
|
||||
elif PLATFORM == 'iar':
|
||||
# toolchains
|
||||
CC = 'iccarm'
|
||||
CXX = 'iccarm'
|
||||
AS = 'iasmarm'
|
||||
AR = 'iarchive'
|
||||
LINK = 'ilinkarm'
|
||||
TARGET_EXT = 'out'
|
||||
|
||||
DEVICE = '-Dewarm'
|
||||
|
||||
CFLAGS = DEVICE
|
||||
CFLAGS += ' --diag_suppress Pa050'
|
||||
CFLAGS += ' --no_cse'
|
||||
CFLAGS += ' --no_unroll'
|
||||
CFLAGS += ' --no_inline'
|
||||
CFLAGS += ' --no_code_motion'
|
||||
CFLAGS += ' --no_tbaa'
|
||||
CFLAGS += ' --no_clustering'
|
||||
CFLAGS += ' --no_scheduling'
|
||||
CFLAGS += ' --endian=little'
|
||||
CFLAGS += ' --cpu=Cortex-M4'
|
||||
CFLAGS += ' -e'
|
||||
CFLAGS += ' --fpu=VFPv4_sp'
|
||||
CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"'
|
||||
CFLAGS += ' --silent'
|
||||
|
||||
AFLAGS = DEVICE
|
||||
AFLAGS += ' -s+'
|
||||
AFLAGS += ' -w+'
|
||||
AFLAGS += ' -r'
|
||||
AFLAGS += ' --cpu Cortex-M4'
|
||||
AFLAGS += ' --fpu VFPv4_sp'
|
||||
AFLAGS += ' -S'
|
||||
|
||||
if BUILD == 'debug':
|
||||
CFLAGS += ' --debug'
|
||||
CFLAGS += ' -On'
|
||||
else:
|
||||
CFLAGS += ' -Oh'
|
||||
|
||||
LFLAGS = ' --config "board/linker_scripts/link.icf"'
|
||||
LFLAGS += ' --entry __iar_program_start'
|
||||
|
||||
CXXFLAGS = CFLAGS
|
||||
|
||||
EXEC_PATH = EXEC_PATH + '/arm/bin/'
|
||||
POST_ACTION = 'ielftool --bin $TARGET rtthread.bin'
|
||||
|
||||
def dist_handle(BSP_ROOT, dist_dir):
|
||||
import sys
|
||||
cwd_path = os.getcwd()
|
||||
sys.path.append(os.path.join(os.path.dirname(BSP_ROOT), 'tools'))
|
||||
from sdk_dist import dist_do_building
|
||||
dist_do_building(BSP_ROOT, dist_dir)
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,10 @@
|
|||
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||
|
||||
<workspace>
|
||||
<project>
|
||||
<path>$WS_DIR$\template.ewp</path>
|
||||
</project>
|
||||
<batchBuild/>
|
||||
</workspace>
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,199 @@
|
|||
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||
<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
|
||||
|
||||
<SchemaVersion>1.0</SchemaVersion>
|
||||
|
||||
<Header>### uVision Project, (C) Keil Software</Header>
|
||||
|
||||
<Extensions>
|
||||
<cExt>*.c</cExt>
|
||||
<aExt>*.s*; *.src; *.a*</aExt>
|
||||
<oExt>*.obj</oExt>
|
||||
<lExt>*.lib</lExt>
|
||||
<tExt>*.txt; *.h; *.inc</tExt>
|
||||
<pExt>*.plm</pExt>
|
||||
<CppX>*.cpp</CppX>
|
||||
<nMigrate>0</nMigrate>
|
||||
</Extensions>
|
||||
|
||||
<DaveTm>
|
||||
<dwLowDateTime>0</dwLowDateTime>
|
||||
<dwHighDateTime>0</dwHighDateTime>
|
||||
</DaveTm>
|
||||
|
||||
<Target>
|
||||
<TargetName>rt-thread</TargetName>
|
||||
<ToolsetNumber>0x4</ToolsetNumber>
|
||||
<ToolsetName>ARM-ADS</ToolsetName>
|
||||
<TargetOption>
|
||||
<CLKADS>25000000</CLKADS>
|
||||
<OPTTT>
|
||||
<gFlags>1</gFlags>
|
||||
<BeepAtEnd>1</BeepAtEnd>
|
||||
<RunSim>1</RunSim>
|
||||
<RunTarget>0</RunTarget>
|
||||
<RunAbUc>0</RunAbUc>
|
||||
</OPTTT>
|
||||
<OPTHX>
|
||||
<HexSelection>1</HexSelection>
|
||||
<FlashByte>65535</FlashByte>
|
||||
<HexRangeLowAddress>0</HexRangeLowAddress>
|
||||
<HexRangeHighAddress>0</HexRangeHighAddress>
|
||||
<HexOffset>0</HexOffset>
|
||||
</OPTHX>
|
||||
<OPTLEX>
|
||||
<PageWidth>79</PageWidth>
|
||||
<PageLength>66</PageLength>
|
||||
<TabStop>8</TabStop>
|
||||
<ListingPath>.\build\keil\List\</ListingPath>
|
||||
</OPTLEX>
|
||||
<ListingPage>
|
||||
<CreateCListing>1</CreateCListing>
|
||||
<CreateAListing>1</CreateAListing>
|
||||
<CreateLListing>1</CreateLListing>
|
||||
<CreateIListing>0</CreateIListing>
|
||||
<AsmCond>1</AsmCond>
|
||||
<AsmSymb>1</AsmSymb>
|
||||
<AsmXref>0</AsmXref>
|
||||
<CCond>1</CCond>
|
||||
<CCode>0</CCode>
|
||||
<CListInc>0</CListInc>
|
||||
<CSymb>0</CSymb>
|
||||
<LinkerCodeListing>0</LinkerCodeListing>
|
||||
</ListingPage>
|
||||
<OPTXL>
|
||||
<LMap>1</LMap>
|
||||
<LComments>1</LComments>
|
||||
<LGenerateSymbols>1</LGenerateSymbols>
|
||||
<LLibSym>1</LLibSym>
|
||||
<LLines>1</LLines>
|
||||
<LLocSym>1</LLocSym>
|
||||
<LPubSym>1</LPubSym>
|
||||
<LXref>0</LXref>
|
||||
<LExpSel>0</LExpSel>
|
||||
</OPTXL>
|
||||
<OPTFL>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<IsCurrentTarget>1</IsCurrentTarget>
|
||||
</OPTFL>
|
||||
<CpuCode>255</CpuCode>
|
||||
<Books>
|
||||
<Book>
|
||||
<Number>0</Number>
|
||||
<Title>Datasheet</Title>
|
||||
<Path>DATASHTS\ST\STM32F4xx\DM00037051.pdf</Path>
|
||||
</Book>
|
||||
<Book>
|
||||
<Number>1</Number>
|
||||
<Title>Reference Manual</Title>
|
||||
<Path>DATASHTS\ST\STM32F4xx\DM00031020.pdf</Path>
|
||||
</Book>
|
||||
<Book>
|
||||
<Number>2</Number>
|
||||
<Title>Technical Reference Manual</Title>
|
||||
<Path>datashts\arm\cortex_m4\r0p1\DDI0439C_CORTEX_M4_R0P1_TRM.PDF</Path>
|
||||
</Book>
|
||||
<Book>
|
||||
<Number>3</Number>
|
||||
<Title>Generic User Guide</Title>
|
||||
<Path>datashts\arm\cortex_m4\r0p1\DUI0553A_CORTEX_M4_DGUG.PDF</Path>
|
||||
</Book>
|
||||
</Books>
|
||||
<DebugOpt>
|
||||
<uSim>0</uSim>
|
||||
<uTrg>1</uTrg>
|
||||
<sLdApp>1</sLdApp>
|
||||
<sGomain>1</sGomain>
|
||||
<sRbreak>1</sRbreak>
|
||||
<sRwatch>1</sRwatch>
|
||||
<sRmem>1</sRmem>
|
||||
<sRfunc>1</sRfunc>
|
||||
<sRbox>1</sRbox>
|
||||
<tLdApp>1</tLdApp>
|
||||
<tGomain>1</tGomain>
|
||||
<tRbreak>1</tRbreak>
|
||||
<tRwatch>1</tRwatch>
|
||||
<tRmem>1</tRmem>
|
||||
<tRfunc>0</tRfunc>
|
||||
<tRbox>1</tRbox>
|
||||
<tRtrace>0</tRtrace>
|
||||
<sRSysVw>1</sRSysVw>
|
||||
<tRSysVw>1</tRSysVw>
|
||||
<sRunDeb>0</sRunDeb>
|
||||
<sLrtime>0</sLrtime>
|
||||
<bEvRecOn>1</bEvRecOn>
|
||||
<bSchkAxf>0</bSchkAxf>
|
||||
<bTchkAxf>0</bTchkAxf>
|
||||
<nTsel>6</nTsel>
|
||||
<sDll></sDll>
|
||||
<sDllPa></sDllPa>
|
||||
<sDlgDll></sDlgDll>
|
||||
<sDlgPa></sDlgPa>
|
||||
<sIfile></sIfile>
|
||||
<tDll></tDll>
|
||||
<tDllPa></tDllPa>
|
||||
<tDlgDll></tDlgDll>
|
||||
<tDlgPa></tDlgPa>
|
||||
<tIfile></tIfile>
|
||||
<pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
|
||||
</DebugOpt>
|
||||
<TargetDriverDllRegistry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>UL2CM3</Key>
|
||||
<Name>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</Name>
|
||||
</SetRegEntry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>JL2CM3</Key>
|
||||
<Name>-U30000299 -O207 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000</Name>
|
||||
</SetRegEntry>
|
||||
</TargetDriverDllRegistry>
|
||||
<Breakpoint/>
|
||||
<Tracepoint>
|
||||
<THDelay>0</THDelay>
|
||||
</Tracepoint>
|
||||
<DebugFlag>
|
||||
<trace>0</trace>
|
||||
<periodic>0</periodic>
|
||||
<aLwin>0</aLwin>
|
||||
<aCover>0</aCover>
|
||||
<aSer1>0</aSer1>
|
||||
<aSer2>0</aSer2>
|
||||
<aPa>0</aPa>
|
||||
<viewmode>0</viewmode>
|
||||
<vrSel>0</vrSel>
|
||||
<aSym>0</aSym>
|
||||
<aTbox>0</aTbox>
|
||||
<AscS1>0</AscS1>
|
||||
<AscS2>0</AscS2>
|
||||
<AscS3>0</AscS3>
|
||||
<aSer3>0</aSer3>
|
||||
<eProf>0</eProf>
|
||||
<aLa>0</aLa>
|
||||
<aPa1>0</aPa1>
|
||||
<AscS4>0</AscS4>
|
||||
<aSer4>0</aSer4>
|
||||
<StkLoc>0</StkLoc>
|
||||
<TrcWin>0</TrcWin>
|
||||
<newCpu>0</newCpu>
|
||||
<uProt>0</uProt>
|
||||
</DebugFlag>
|
||||
<LintExecutable></LintExecutable>
|
||||
<LintConfigFile></LintConfigFile>
|
||||
<bLintAuto>0</bLintAuto>
|
||||
<bAutoGenD>0</bAutoGenD>
|
||||
<LntExFlags>0</LntExFlags>
|
||||
<pMisraName></pMisraName>
|
||||
<pszMrule></pszMrule>
|
||||
<pSingCmds></pSingCmds>
|
||||
<pMultCmds></pMultCmds>
|
||||
<pMisraNamep></pMisraNamep>
|
||||
<pszMrulep></pszMrulep>
|
||||
<pSingCmdsp></pSingCmdsp>
|
||||
<pMultCmdsp></pMultCmdsp>
|
||||
</TargetOption>
|
||||
</Target>
|
||||
|
||||
</ProjectOpt>
|
||||
|
|
@ -0,0 +1,187 @@
|
|||
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||
<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
|
||||
|
||||
<SchemaVersion>1.0</SchemaVersion>
|
||||
|
||||
<Header>### uVision Project, (C) Keil Software</Header>
|
||||
|
||||
<Extensions>
|
||||
<cExt>*.c</cExt>
|
||||
<aExt>*.s*; *.src; *.a*</aExt>
|
||||
<oExt>*.obj; *.o</oExt>
|
||||
<lExt>*.lib</lExt>
|
||||
<tExt>*.txt; *.h; *.inc</tExt>
|
||||
<pExt>*.plm</pExt>
|
||||
<CppX>*.cpp</CppX>
|
||||
<nMigrate>0</nMigrate>
|
||||
</Extensions>
|
||||
|
||||
<DaveTm>
|
||||
<dwLowDateTime>0</dwLowDateTime>
|
||||
<dwHighDateTime>0</dwHighDateTime>
|
||||
</DaveTm>
|
||||
|
||||
<Target>
|
||||
<TargetName>rt-thread</TargetName>
|
||||
<ToolsetNumber>0x4</ToolsetNumber>
|
||||
<ToolsetName>ARM-ADS</ToolsetName>
|
||||
<TargetOption>
|
||||
<CLKADS>24000000</CLKADS>
|
||||
<OPTTT>
|
||||
<gFlags>1</gFlags>
|
||||
<BeepAtEnd>1</BeepAtEnd>
|
||||
<RunSim>0</RunSim>
|
||||
<RunTarget>1</RunTarget>
|
||||
<RunAbUc>0</RunAbUc>
|
||||
</OPTTT>
|
||||
<OPTHX>
|
||||
<HexSelection>1</HexSelection>
|
||||
<FlashByte>65535</FlashByte>
|
||||
<HexRangeLowAddress>0</HexRangeLowAddress>
|
||||
<HexRangeHighAddress>0</HexRangeHighAddress>
|
||||
<HexOffset>0</HexOffset>
|
||||
</OPTHX>
|
||||
<OPTLEX>
|
||||
<PageWidth>79</PageWidth>
|
||||
<PageLength>66</PageLength>
|
||||
<TabStop>8</TabStop>
|
||||
<ListingPath>.\build\keil\List\</ListingPath>
|
||||
</OPTLEX>
|
||||
<ListingPage>
|
||||
<CreateCListing>1</CreateCListing>
|
||||
<CreateAListing>1</CreateAListing>
|
||||
<CreateLListing>1</CreateLListing>
|
||||
<CreateIListing>0</CreateIListing>
|
||||
<AsmCond>1</AsmCond>
|
||||
<AsmSymb>1</AsmSymb>
|
||||
<AsmXref>0</AsmXref>
|
||||
<CCond>1</CCond>
|
||||
<CCode>0</CCode>
|
||||
<CListInc>0</CListInc>
|
||||
<CSymb>0</CSymb>
|
||||
<LinkerCodeListing>0</LinkerCodeListing>
|
||||
</ListingPage>
|
||||
<OPTXL>
|
||||
<LMap>1</LMap>
|
||||
<LComments>1</LComments>
|
||||
<LGenerateSymbols>1</LGenerateSymbols>
|
||||
<LLibSym>1</LLibSym>
|
||||
<LLines>1</LLines>
|
||||
<LLocSym>1</LLocSym>
|
||||
<LPubSym>1</LPubSym>
|
||||
<LXref>0</LXref>
|
||||
<LExpSel>0</LExpSel>
|
||||
</OPTXL>
|
||||
<OPTFL>
|
||||
<tvExp>1</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<IsCurrentTarget>1</IsCurrentTarget>
|
||||
</OPTFL>
|
||||
<CpuCode>18</CpuCode>
|
||||
<DebugOpt>
|
||||
<uSim>0</uSim>
|
||||
<uTrg>1</uTrg>
|
||||
<sLdApp>1</sLdApp>
|
||||
<sGomain>1</sGomain>
|
||||
<sRbreak>1</sRbreak>
|
||||
<sRwatch>1</sRwatch>
|
||||
<sRmem>1</sRmem>
|
||||
<sRfunc>1</sRfunc>
|
||||
<sRbox>1</sRbox>
|
||||
<tLdApp>1</tLdApp>
|
||||
<tGomain>1</tGomain>
|
||||
<tRbreak>1</tRbreak>
|
||||
<tRwatch>1</tRwatch>
|
||||
<tRmem>1</tRmem>
|
||||
<tRfunc>0</tRfunc>
|
||||
<tRbox>1</tRbox>
|
||||
<tRtrace>1</tRtrace>
|
||||
<sRSysVw>1</sRSysVw>
|
||||
<tRSysVw>1</tRSysVw>
|
||||
<sRunDeb>0</sRunDeb>
|
||||
<sLrtime>0</sLrtime>
|
||||
<bEvRecOn>1</bEvRecOn>
|
||||
<bSchkAxf>0</bSchkAxf>
|
||||
<bTchkAxf>0</bTchkAxf>
|
||||
<nTsel>6</nTsel>
|
||||
<sDll></sDll>
|
||||
<sDllPa></sDllPa>
|
||||
<sDlgDll></sDlgDll>
|
||||
<sDlgPa></sDlgPa>
|
||||
<sIfile></sIfile>
|
||||
<tDll></tDll>
|
||||
<tDllPa></tDllPa>
|
||||
<tDlgDll></tDlgDll>
|
||||
<tDlgPa></tDlgPa>
|
||||
<tIfile></tIfile>
|
||||
<pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
|
||||
</DebugOpt>
|
||||
<TargetDriverDllRegistry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>UL2CM3</Key>
|
||||
<Name>UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32F4xx_1024 -FL0100000 -FS08000000 -FP0($$Device:STM32F407IGTx$CMSIS\Flash\STM32F4xx_1024.FLM)</Name>
|
||||
</SetRegEntry>
|
||||
</TargetDriverDllRegistry>
|
||||
<Breakpoint/>
|
||||
<Tracepoint>
|
||||
<THDelay>0</THDelay>
|
||||
</Tracepoint>
|
||||
<DebugFlag>
|
||||
<trace>0</trace>
|
||||
<periodic>0</periodic>
|
||||
<aLwin>0</aLwin>
|
||||
<aCover>0</aCover>
|
||||
<aSer1>0</aSer1>
|
||||
<aSer2>0</aSer2>
|
||||
<aPa>0</aPa>
|
||||
<viewmode>0</viewmode>
|
||||
<vrSel>0</vrSel>
|
||||
<aSym>0</aSym>
|
||||
<aTbox>0</aTbox>
|
||||
<AscS1>0</AscS1>
|
||||
<AscS2>0</AscS2>
|
||||
<AscS3>0</AscS3>
|
||||
<aSer3>0</aSer3>
|
||||
<eProf>0</eProf>
|
||||
<aLa>0</aLa>
|
||||
<aPa1>0</aPa1>
|
||||
<AscS4>0</AscS4>
|
||||
<aSer4>0</aSer4>
|
||||
<StkLoc>0</StkLoc>
|
||||
<TrcWin>0</TrcWin>
|
||||
<newCpu>0</newCpu>
|
||||
<uProt>0</uProt>
|
||||
</DebugFlag>
|
||||
<LintExecutable></LintExecutable>
|
||||
<LintConfigFile></LintConfigFile>
|
||||
<bLintAuto>0</bLintAuto>
|
||||
<bAutoGenD>0</bAutoGenD>
|
||||
<LntExFlags>0</LntExFlags>
|
||||
<pMisraName></pMisraName>
|
||||
<pszMrule></pszMrule>
|
||||
<pSingCmds></pSingCmds>
|
||||
<pMultCmds></pMultCmds>
|
||||
<pMisraNamep></pMisraNamep>
|
||||
<pszMrulep></pszMrulep>
|
||||
<pSingCmdsp></pSingCmdsp>
|
||||
<pMultCmdsp></pMultCmdsp>
|
||||
<DebugDescription>
|
||||
<Enable>1</Enable>
|
||||
<EnableFlashSeq>0</EnableFlashSeq>
|
||||
<EnableLog>0</EnableLog>
|
||||
<Protocol>2</Protocol>
|
||||
<DbgClock>10000000</DbgClock>
|
||||
</DebugDescription>
|
||||
</TargetOption>
|
||||
</Target>
|
||||
|
||||
<Group>
|
||||
<GroupName>Source Group 1</GroupName>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<cbSel>0</cbSel>
|
||||
<RteFlg>0</RteFlg>
|
||||
</Group>
|
||||
|
||||
</ProjectOpt>
|
||||
|
|
@ -0,0 +1,438 @@
|
|||
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
|
||||
|
||||
<SchemaVersion>1.1</SchemaVersion>
|
||||
|
||||
<Header>### uVision Project, (C) Keil Software</Header>
|
||||
|
||||
<Targets>
|
||||
<Target>
|
||||
<TargetName>rt-thread</TargetName>
|
||||
<ToolsetNumber>0x4</ToolsetNumber>
|
||||
<ToolsetName>ARM-ADS</ToolsetName>
|
||||
<uAC6>0</uAC6>
|
||||
<TargetOption>
|
||||
<TargetCommonOption>
|
||||
<Device>STM32F407IG</Device>
|
||||
<Vendor>STMicroelectronics</Vendor>
|
||||
<Cpu>IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
|
||||
<FlashUtilSpec></FlashUtilSpec>
|
||||
<StartupFile>"Startup\ST\STM32F4xx\startup_stm32f40_41xxx.s" ("STM32F40/41xxx Startup Code")</StartupFile>
|
||||
<FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</FlashDriverDll>
|
||||
<DeviceId>6104</DeviceId>
|
||||
<RegisterFile>stm32f4xx.h</RegisterFile>
|
||||
<MemoryEnv></MemoryEnv>
|
||||
<Cmp></Cmp>
|
||||
<Asm></Asm>
|
||||
<Linker></Linker>
|
||||
<OHString></OHString>
|
||||
<InfinionOptionDll></InfinionOptionDll>
|
||||
<SLE66CMisc>-DSTM32F40_41xxx</SLE66CMisc>
|
||||
<SLE66AMisc></SLE66AMisc>
|
||||
<SLE66LinkerMisc></SLE66LinkerMisc>
|
||||
<SFDFile>SFD\ST\STM32F4xx\STM32F40x.sfr</SFDFile>
|
||||
<bCustSvd>0</bCustSvd>
|
||||
<UseEnv>0</UseEnv>
|
||||
<BinPath></BinPath>
|
||||
<IncludePath></IncludePath>
|
||||
<LibPath></LibPath>
|
||||
<RegisterFilePath>ST\STM32F4xx\</RegisterFilePath>
|
||||
<DBRegisterFilePath>ST\STM32F4xx\</DBRegisterFilePath>
|
||||
<TargetStatus>
|
||||
<Error>0</Error>
|
||||
<ExitCodeStop>0</ExitCodeStop>
|
||||
<ButtonStop>0</ButtonStop>
|
||||
<NotGenerated>0</NotGenerated>
|
||||
<InvalidFlash>1</InvalidFlash>
|
||||
</TargetStatus>
|
||||
<OutputDirectory>.\build\keil\Obj\</OutputDirectory>
|
||||
<OutputName>rt-thread</OutputName>
|
||||
<CreateExecutable>1</CreateExecutable>
|
||||
<CreateLib>0</CreateLib>
|
||||
<CreateHexFile>0</CreateHexFile>
|
||||
<DebugInformation>1</DebugInformation>
|
||||
<BrowseInformation>0</BrowseInformation>
|
||||
<ListingPath>.\build\keil\List\</ListingPath>
|
||||
<HexFormatSelection>1</HexFormatSelection>
|
||||
<Merge32K>0</Merge32K>
|
||||
<CreateBatchFile>0</CreateBatchFile>
|
||||
<BeforeCompile>
|
||||
<RunUserProg1>0</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name></UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopU1X>0</nStopU1X>
|
||||
<nStopU2X>0</nStopU2X>
|
||||
</BeforeCompile>
|
||||
<BeforeMake>
|
||||
<RunUserProg1>0</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name></UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopB1X>0</nStopB1X>
|
||||
<nStopB2X>0</nStopB2X>
|
||||
</BeforeMake>
|
||||
<AfterMake>
|
||||
<RunUserProg1>1</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopA1X>0</nStopA1X>
|
||||
<nStopA2X>0</nStopA2X>
|
||||
</AfterMake>
|
||||
<SelectedForBatchBuild>0</SelectedForBatchBuild>
|
||||
<SVCSIdString></SVCSIdString>
|
||||
</TargetCommonOption>
|
||||
<CommonProperty>
|
||||
<UseCPPCompiler>0</UseCPPCompiler>
|
||||
<RVCTCodeConst>0</RVCTCodeConst>
|
||||
<RVCTZI>0</RVCTZI>
|
||||
<RVCTOtherData>0</RVCTOtherData>
|
||||
<ModuleSelection>0</ModuleSelection>
|
||||
<IncludeInBuild>1</IncludeInBuild>
|
||||
<AlwaysBuild>0</AlwaysBuild>
|
||||
<GenerateAssemblyFile>0</GenerateAssemblyFile>
|
||||
<AssembleAssemblyFile>0</AssembleAssemblyFile>
|
||||
<PublicsOnly>0</PublicsOnly>
|
||||
<StopOnExitCode>3</StopOnExitCode>
|
||||
<CustomArgument></CustomArgument>
|
||||
<IncludeLibraryModules></IncludeLibraryModules>
|
||||
<ComprImg>1</ComprImg>
|
||||
</CommonProperty>
|
||||
<DllOption>
|
||||
<SimDllName>SARMCM3.DLL</SimDllName>
|
||||
<SimDllArguments>-MPU -REMAP</SimDllArguments>
|
||||
<SimDlgDll>DCM.DLL</SimDlgDll>
|
||||
<SimDlgDllArguments>-pCM4</SimDlgDllArguments>
|
||||
<TargetDllName>SARMCM3.DLL</TargetDllName>
|
||||
<TargetDllArguments>-MPU</TargetDllArguments>
|
||||
<TargetDlgDll>TCM.DLL</TargetDlgDll>
|
||||
<TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
|
||||
</DllOption>
|
||||
<DebugOption>
|
||||
<OPTHX>
|
||||
<HexSelection>1</HexSelection>
|
||||
<HexRangeLowAddress>0</HexRangeLowAddress>
|
||||
<HexRangeHighAddress>0</HexRangeHighAddress>
|
||||
<HexOffset>0</HexOffset>
|
||||
<Oh166RecLen>16</Oh166RecLen>
|
||||
</OPTHX>
|
||||
<Simulator>
|
||||
<UseSimulator>0</UseSimulator>
|
||||
<LoadApplicationAtStartup>1</LoadApplicationAtStartup>
|
||||
<RunToMain>1</RunToMain>
|
||||
<RestoreBreakpoints>1</RestoreBreakpoints>
|
||||
<RestoreWatchpoints>1</RestoreWatchpoints>
|
||||
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
|
||||
<RestoreFunctions>1</RestoreFunctions>
|
||||
<RestoreToolbox>1</RestoreToolbox>
|
||||
<LimitSpeedToRealTime>0</LimitSpeedToRealTime>
|
||||
<RestoreSysVw>1</RestoreSysVw>
|
||||
</Simulator>
|
||||
<Target>
|
||||
<UseTarget>1</UseTarget>
|
||||
<LoadApplicationAtStartup>1</LoadApplicationAtStartup>
|
||||
<RunToMain>1</RunToMain>
|
||||
<RestoreBreakpoints>1</RestoreBreakpoints>
|
||||
<RestoreWatchpoints>1</RestoreWatchpoints>
|
||||
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
|
||||
<RestoreFunctions>0</RestoreFunctions>
|
||||
<RestoreToolbox>1</RestoreToolbox>
|
||||
<RestoreTracepoints>0</RestoreTracepoints>
|
||||
<RestoreSysVw>1</RestoreSysVw>
|
||||
</Target>
|
||||
<RunDebugAfterBuild>0</RunDebugAfterBuild>
|
||||
<TargetSelection>6</TargetSelection>
|
||||
<SimDlls>
|
||||
<CpuDll></CpuDll>
|
||||
<CpuDllArguments></CpuDllArguments>
|
||||
<PeripheralDll></PeripheralDll>
|
||||
<PeripheralDllArguments></PeripheralDllArguments>
|
||||
<InitializationFile></InitializationFile>
|
||||
</SimDlls>
|
||||
<TargetDlls>
|
||||
<CpuDll></CpuDll>
|
||||
<CpuDllArguments></CpuDllArguments>
|
||||
<PeripheralDll></PeripheralDll>
|
||||
<PeripheralDllArguments></PeripheralDllArguments>
|
||||
<InitializationFile></InitializationFile>
|
||||
<Driver>STLink\ST-LINKIII-KEIL_SWO.dll</Driver>
|
||||
</TargetDlls>
|
||||
</DebugOption>
|
||||
<Utilities>
|
||||
<Flash1>
|
||||
<UseTargetDll>1</UseTargetDll>
|
||||
<UseExternalTool>0</UseExternalTool>
|
||||
<RunIndependent>0</RunIndependent>
|
||||
<UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
|
||||
<Capability>1</Capability>
|
||||
<DriverSelection>4101</DriverSelection>
|
||||
</Flash1>
|
||||
<bUseTDR>1</bUseTDR>
|
||||
<Flash2>STLink\ST-LINKIII-KEIL_SWO.dll</Flash2>
|
||||
<Flash3>"" ()</Flash3>
|
||||
<Flash4></Flash4>
|
||||
<pFcarmOut></pFcarmOut>
|
||||
<pFcarmGrp></pFcarmGrp>
|
||||
<pFcArmRoot></pFcArmRoot>
|
||||
<FcArmLst>0</FcArmLst>
|
||||
</Utilities>
|
||||
<TargetArmAds>
|
||||
<ArmAdsMisc>
|
||||
<GenerateListings>0</GenerateListings>
|
||||
<asHll>1</asHll>
|
||||
<asAsm>1</asAsm>
|
||||
<asMacX>1</asMacX>
|
||||
<asSyms>1</asSyms>
|
||||
<asFals>1</asFals>
|
||||
<asDbgD>1</asDbgD>
|
||||
<asForm>1</asForm>
|
||||
<ldLst>0</ldLst>
|
||||
<ldmm>1</ldmm>
|
||||
<ldXref>1</ldXref>
|
||||
<BigEnd>0</BigEnd>
|
||||
<AdsALst>1</AdsALst>
|
||||
<AdsACrf>1</AdsACrf>
|
||||
<AdsANop>0</AdsANop>
|
||||
<AdsANot>0</AdsANot>
|
||||
<AdsLLst>1</AdsLLst>
|
||||
<AdsLmap>1</AdsLmap>
|
||||
<AdsLcgr>1</AdsLcgr>
|
||||
<AdsLsym>1</AdsLsym>
|
||||
<AdsLszi>1</AdsLszi>
|
||||
<AdsLtoi>1</AdsLtoi>
|
||||
<AdsLsun>1</AdsLsun>
|
||||
<AdsLven>1</AdsLven>
|
||||
<AdsLsxf>1</AdsLsxf>
|
||||
<RvctClst>0</RvctClst>
|
||||
<GenPPlst>0</GenPPlst>
|
||||
<AdsCpuType>"Cortex-M4"</AdsCpuType>
|
||||
<RvctDeviceName></RvctDeviceName>
|
||||
<mOS>0</mOS>
|
||||
<uocRom>0</uocRom>
|
||||
<uocRam>0</uocRam>
|
||||
<hadIROM>1</hadIROM>
|
||||
<hadIRAM>1</hadIRAM>
|
||||
<hadXRAM>0</hadXRAM>
|
||||
<uocXRam>0</uocXRam>
|
||||
<RvdsVP>2</RvdsVP>
|
||||
<RvdsMve>0</RvdsMve>
|
||||
<RvdsCdeCp>0</RvdsCdeCp>
|
||||
<hadIRAM2>1</hadIRAM2>
|
||||
<hadIROM2>0</hadIROM2>
|
||||
<StupSel>8</StupSel>
|
||||
<useUlib>0</useUlib>
|
||||
<EndSel>0</EndSel>
|
||||
<uLtcg>0</uLtcg>
|
||||
<nSecure>0</nSecure>
|
||||
<RoSelD>3</RoSelD>
|
||||
<RwSelD>3</RwSelD>
|
||||
<CodeSel>0</CodeSel>
|
||||
<OptFeed>0</OptFeed>
|
||||
<NoZi1>0</NoZi1>
|
||||
<NoZi2>0</NoZi2>
|
||||
<NoZi3>0</NoZi3>
|
||||
<NoZi4>0</NoZi4>
|
||||
<NoZi5>0</NoZi5>
|
||||
<Ro1Chk>0</Ro1Chk>
|
||||
<Ro2Chk>0</Ro2Chk>
|
||||
<Ro3Chk>0</Ro3Chk>
|
||||
<Ir1Chk>1</Ir1Chk>
|
||||
<Ir2Chk>0</Ir2Chk>
|
||||
<Ra1Chk>0</Ra1Chk>
|
||||
<Ra2Chk>0</Ra2Chk>
|
||||
<Ra3Chk>0</Ra3Chk>
|
||||
<Im1Chk>1</Im1Chk>
|
||||
<Im2Chk>0</Im2Chk>
|
||||
<OnChipMemories>
|
||||
<Ocm1>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm1>
|
||||
<Ocm2>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm2>
|
||||
<Ocm3>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm3>
|
||||
<Ocm4>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm4>
|
||||
<Ocm5>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm5>
|
||||
<Ocm6>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm6>
|
||||
<IRAM>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x20000000</StartAddress>
|
||||
<Size>0x20000</Size>
|
||||
</IRAM>
|
||||
<IROM>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x8000000</StartAddress>
|
||||
<Size>0x100000</Size>
|
||||
</IROM>
|
||||
<XRAM>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</XRAM>
|
||||
<OCR_RVCT1>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT1>
|
||||
<OCR_RVCT2>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT2>
|
||||
<OCR_RVCT3>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT3>
|
||||
<OCR_RVCT4>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x8000000</StartAddress>
|
||||
<Size>0x100000</Size>
|
||||
</OCR_RVCT4>
|
||||
<OCR_RVCT5>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT5>
|
||||
<OCR_RVCT6>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT6>
|
||||
<OCR_RVCT7>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT7>
|
||||
<OCR_RVCT8>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT8>
|
||||
<OCR_RVCT9>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x20000000</StartAddress>
|
||||
<Size>0x20000</Size>
|
||||
</OCR_RVCT9>
|
||||
<OCR_RVCT10>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x10000000</StartAddress>
|
||||
<Size>0x10000</Size>
|
||||
</OCR_RVCT10>
|
||||
</OnChipMemories>
|
||||
<RvctStartVector></RvctStartVector>
|
||||
</ArmAdsMisc>
|
||||
<Cads>
|
||||
<interw>1</interw>
|
||||
<Optim>1</Optim>
|
||||
<oTime>0</oTime>
|
||||
<SplitLS>0</SplitLS>
|
||||
<OneElfS>1</OneElfS>
|
||||
<Strict>0</Strict>
|
||||
<EnumInt>0</EnumInt>
|
||||
<PlainCh>0</PlainCh>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<wLevel>0</wLevel>
|
||||
<uThumb>0</uThumb>
|
||||
<uSurpInc>0</uSurpInc>
|
||||
<uC99>1</uC99>
|
||||
<uGnu>0</uGnu>
|
||||
<useXO>0</useXO>
|
||||
<v6Lang>1</v6Lang>
|
||||
<v6LangP>1</v6LangP>
|
||||
<vShortEn>1</vShortEn>
|
||||
<vShortWch>1</vShortWch>
|
||||
<v6Lto>0</v6Lto>
|
||||
<v6WtE>0</v6WtE>
|
||||
<v6Rtti>0</v6Rtti>
|
||||
<VariousControls>
|
||||
<MiscControls></MiscControls>
|
||||
<Define></Define>
|
||||
<Undefine></Undefine>
|
||||
<IncludePath></IncludePath>
|
||||
</VariousControls>
|
||||
</Cads>
|
||||
<Aads>
|
||||
<interw>1</interw>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<thumb>0</thumb>
|
||||
<SplitLS>0</SplitLS>
|
||||
<SwStkChk>0</SwStkChk>
|
||||
<NoWarn>0</NoWarn>
|
||||
<uSurpInc>0</uSurpInc>
|
||||
<useXO>0</useXO>
|
||||
<ClangAsOpt>1</ClangAsOpt>
|
||||
<VariousControls>
|
||||
<MiscControls></MiscControls>
|
||||
<Define></Define>
|
||||
<Undefine></Undefine>
|
||||
<IncludePath></IncludePath>
|
||||
</VariousControls>
|
||||
</Aads>
|
||||
<LDads>
|
||||
<umfTarg>0</umfTarg>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<noStLib>0</noStLib>
|
||||
<RepFail>1</RepFail>
|
||||
<useFile>0</useFile>
|
||||
<TextAddressRange>0x08000000</TextAddressRange>
|
||||
<DataAddressRange>0x20000000</DataAddressRange>
|
||||
<pXoBase></pXoBase>
|
||||
<ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
|
||||
<IncludeLibs></IncludeLibs>
|
||||
<IncludeLibsPath></IncludeLibsPath>
|
||||
<Misc></Misc>
|
||||
<LinkerInputFile></LinkerInputFile>
|
||||
<DisabledWarnings></DisabledWarnings>
|
||||
</LDads>
|
||||
</TargetArmAds>
|
||||
</TargetOption>
|
||||
</Target>
|
||||
</Targets>
|
||||
|
||||
<LayerInfo>
|
||||
<Layers>
|
||||
<Layer>
|
||||
<LayName><Project Info></LayName>
|
||||
<LayDesc></LayDesc>
|
||||
<LayUrl></LayUrl>
|
||||
<LayKeys></LayKeys>
|
||||
<LayCat></LayCat>
|
||||
<LayLic></LayLic>
|
||||
<LayTarg>0</LayTarg>
|
||||
<LayPrjMark>1</LayPrjMark>
|
||||
</Layer>
|
||||
</Layers>
|
||||
</LayerInfo>
|
||||
|
||||
</Project>
|
||||
|
|
@ -0,0 +1,411 @@
|
|||
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
|
||||
|
||||
<SchemaVersion>2.1</SchemaVersion>
|
||||
|
||||
<Header>### uVision Project, (C) Keil Software</Header>
|
||||
|
||||
<Targets>
|
||||
<Target>
|
||||
<TargetName>rt-thread</TargetName>
|
||||
<ToolsetNumber>0x4</ToolsetNumber>
|
||||
<ToolsetName>ARM-ADS</ToolsetName>
|
||||
<pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
|
||||
<uAC6>0</uAC6>
|
||||
<TargetOption>
|
||||
<TargetCommonOption>
|
||||
<Device>STM32F407IGTx</Device>
|
||||
<Vendor>STMicroelectronics</Vendor>
|
||||
<PackID>Keil.STM32F4xx_DFP.2.14.0</PackID>
|
||||
<PackURL>http://www.keil.com/pack/</PackURL>
|
||||
<Cpu>IRAM(0x20000000,0x00020000) IRAM2(0x10000000,0x00010000) IROM(0x08000000,0x00100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
|
||||
<FlashUtilSpec></FlashUtilSpec>
|
||||
<StartupFile></StartupFile>
|
||||
<FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F407IGTx$CMSIS\Flash\STM32F4xx_1024.FLM))</FlashDriverDll>
|
||||
<DeviceId>0</DeviceId>
|
||||
<RegisterFile>$$Device:STM32F407IGTx$Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h</RegisterFile>
|
||||
<MemoryEnv></MemoryEnv>
|
||||
<Cmp></Cmp>
|
||||
<Asm></Asm>
|
||||
<Linker></Linker>
|
||||
<OHString></OHString>
|
||||
<InfinionOptionDll></InfinionOptionDll>
|
||||
<SLE66CMisc></SLE66CMisc>
|
||||
<SLE66AMisc></SLE66AMisc>
|
||||
<SLE66LinkerMisc></SLE66LinkerMisc>
|
||||
<SFDFile>$$Device:STM32F407IGTx$CMSIS\SVD\STM32F40x.svd</SFDFile>
|
||||
<bCustSvd>0</bCustSvd>
|
||||
<UseEnv>0</UseEnv>
|
||||
<BinPath></BinPath>
|
||||
<IncludePath></IncludePath>
|
||||
<LibPath></LibPath>
|
||||
<RegisterFilePath></RegisterFilePath>
|
||||
<DBRegisterFilePath></DBRegisterFilePath>
|
||||
<TargetStatus>
|
||||
<Error>0</Error>
|
||||
<ExitCodeStop>0</ExitCodeStop>
|
||||
<ButtonStop>0</ButtonStop>
|
||||
<NotGenerated>0</NotGenerated>
|
||||
<InvalidFlash>1</InvalidFlash>
|
||||
</TargetStatus>
|
||||
<OutputDirectory>.\build\keil\Obj\</OutputDirectory>
|
||||
<OutputName>rt-thread</OutputName>
|
||||
<CreateExecutable>1</CreateExecutable>
|
||||
<CreateLib>0</CreateLib>
|
||||
<CreateHexFile>0</CreateHexFile>
|
||||
<DebugInformation>1</DebugInformation>
|
||||
<BrowseInformation>0</BrowseInformation>
|
||||
<ListingPath>.\build\keil\List\</ListingPath>
|
||||
<HexFormatSelection>1</HexFormatSelection>
|
||||
<Merge32K>0</Merge32K>
|
||||
<CreateBatchFile>0</CreateBatchFile>
|
||||
<BeforeCompile>
|
||||
<RunUserProg1>0</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name></UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopU1X>0</nStopU1X>
|
||||
<nStopU2X>0</nStopU2X>
|
||||
</BeforeCompile>
|
||||
<BeforeMake>
|
||||
<RunUserProg1>0</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name></UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopB1X>0</nStopB1X>
|
||||
<nStopB2X>0</nStopB2X>
|
||||
</BeforeMake>
|
||||
<AfterMake>
|
||||
<RunUserProg1>1</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopA1X>0</nStopA1X>
|
||||
<nStopA2X>0</nStopA2X>
|
||||
</AfterMake>
|
||||
<SelectedForBatchBuild>0</SelectedForBatchBuild>
|
||||
<SVCSIdString></SVCSIdString>
|
||||
</TargetCommonOption>
|
||||
<CommonProperty>
|
||||
<UseCPPCompiler>0</UseCPPCompiler>
|
||||
<RVCTCodeConst>0</RVCTCodeConst>
|
||||
<RVCTZI>0</RVCTZI>
|
||||
<RVCTOtherData>0</RVCTOtherData>
|
||||
<ModuleSelection>0</ModuleSelection>
|
||||
<IncludeInBuild>1</IncludeInBuild>
|
||||
<AlwaysBuild>0</AlwaysBuild>
|
||||
<GenerateAssemblyFile>0</GenerateAssemblyFile>
|
||||
<AssembleAssemblyFile>0</AssembleAssemblyFile>
|
||||
<PublicsOnly>0</PublicsOnly>
|
||||
<StopOnExitCode>3</StopOnExitCode>
|
||||
<CustomArgument></CustomArgument>
|
||||
<IncludeLibraryModules></IncludeLibraryModules>
|
||||
<ComprImg>1</ComprImg>
|
||||
</CommonProperty>
|
||||
<DllOption>
|
||||
<SimDllName>SARMCM3.DLL</SimDllName>
|
||||
<SimDllArguments> -REMAP -MPU</SimDllArguments>
|
||||
<SimDlgDll>DCM.DLL</SimDlgDll>
|
||||
<SimDlgDllArguments>-pCM4</SimDlgDllArguments>
|
||||
<TargetDllName>SARMCM3.DLL</TargetDllName>
|
||||
<TargetDllArguments> -MPU</TargetDllArguments>
|
||||
<TargetDlgDll>TCM.DLL</TargetDlgDll>
|
||||
<TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
|
||||
</DllOption>
|
||||
<DebugOption>
|
||||
<OPTHX>
|
||||
<HexSelection>1</HexSelection>
|
||||
<HexRangeLowAddress>0</HexRangeLowAddress>
|
||||
<HexRangeHighAddress>0</HexRangeHighAddress>
|
||||
<HexOffset>0</HexOffset>
|
||||
<Oh166RecLen>16</Oh166RecLen>
|
||||
</OPTHX>
|
||||
</DebugOption>
|
||||
<Utilities>
|
||||
<Flash1>
|
||||
<UseTargetDll>1</UseTargetDll>
|
||||
<UseExternalTool>0</UseExternalTool>
|
||||
<RunIndependent>0</RunIndependent>
|
||||
<UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
|
||||
<Capability>1</Capability>
|
||||
<DriverSelection>4101</DriverSelection>
|
||||
</Flash1>
|
||||
<bUseTDR>1</bUseTDR>
|
||||
<Flash2>STLink\ST-LINKIII-KEIL_SWO.dll</Flash2>
|
||||
<Flash3>"" ()</Flash3>
|
||||
<Flash4></Flash4>
|
||||
<pFcarmOut></pFcarmOut>
|
||||
<pFcarmGrp></pFcarmGrp>
|
||||
<pFcArmRoot></pFcArmRoot>
|
||||
<FcArmLst>0</FcArmLst>
|
||||
</Utilities>
|
||||
<TargetArmAds>
|
||||
<ArmAdsMisc>
|
||||
<GenerateListings>0</GenerateListings>
|
||||
<asHll>1</asHll>
|
||||
<asAsm>1</asAsm>
|
||||
<asMacX>1</asMacX>
|
||||
<asSyms>1</asSyms>
|
||||
<asFals>1</asFals>
|
||||
<asDbgD>1</asDbgD>
|
||||
<asForm>1</asForm>
|
||||
<ldLst>0</ldLst>
|
||||
<ldmm>1</ldmm>
|
||||
<ldXref>1</ldXref>
|
||||
<BigEnd>0</BigEnd>
|
||||
<AdsALst>1</AdsALst>
|
||||
<AdsACrf>1</AdsACrf>
|
||||
<AdsANop>0</AdsANop>
|
||||
<AdsANot>0</AdsANot>
|
||||
<AdsLLst>1</AdsLLst>
|
||||
<AdsLmap>1</AdsLmap>
|
||||
<AdsLcgr>1</AdsLcgr>
|
||||
<AdsLsym>1</AdsLsym>
|
||||
<AdsLszi>1</AdsLszi>
|
||||
<AdsLtoi>1</AdsLtoi>
|
||||
<AdsLsun>1</AdsLsun>
|
||||
<AdsLven>1</AdsLven>
|
||||
<AdsLsxf>1</AdsLsxf>
|
||||
<RvctClst>0</RvctClst>
|
||||
<GenPPlst>0</GenPPlst>
|
||||
<AdsCpuType>"Cortex-M4"</AdsCpuType>
|
||||
<RvctDeviceName></RvctDeviceName>
|
||||
<mOS>0</mOS>
|
||||
<uocRom>0</uocRom>
|
||||
<uocRam>0</uocRam>
|
||||
<hadIROM>1</hadIROM>
|
||||
<hadIRAM>1</hadIRAM>
|
||||
<hadXRAM>0</hadXRAM>
|
||||
<uocXRam>0</uocXRam>
|
||||
<RvdsVP>2</RvdsVP>
|
||||
<RvdsMve>0</RvdsMve>
|
||||
<RvdsCdeCp>0</RvdsCdeCp>
|
||||
<hadIRAM2>1</hadIRAM2>
|
||||
<hadIROM2>0</hadIROM2>
|
||||
<StupSel>8</StupSel>
|
||||
<useUlib>0</useUlib>
|
||||
<EndSel>0</EndSel>
|
||||
<uLtcg>0</uLtcg>
|
||||
<nSecure>0</nSecure>
|
||||
<RoSelD>3</RoSelD>
|
||||
<RwSelD>4</RwSelD>
|
||||
<CodeSel>0</CodeSel>
|
||||
<OptFeed>0</OptFeed>
|
||||
<NoZi1>0</NoZi1>
|
||||
<NoZi2>0</NoZi2>
|
||||
<NoZi3>0</NoZi3>
|
||||
<NoZi4>0</NoZi4>
|
||||
<NoZi5>0</NoZi5>
|
||||
<Ro1Chk>0</Ro1Chk>
|
||||
<Ro2Chk>0</Ro2Chk>
|
||||
<Ro3Chk>0</Ro3Chk>
|
||||
<Ir1Chk>1</Ir1Chk>
|
||||
<Ir2Chk>0</Ir2Chk>
|
||||
<Ra1Chk>0</Ra1Chk>
|
||||
<Ra2Chk>0</Ra2Chk>
|
||||
<Ra3Chk>0</Ra3Chk>
|
||||
<Im1Chk>1</Im1Chk>
|
||||
<Im2Chk>0</Im2Chk>
|
||||
<OnChipMemories>
|
||||
<Ocm1>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm1>
|
||||
<Ocm2>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm2>
|
||||
<Ocm3>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm3>
|
||||
<Ocm4>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm4>
|
||||
<Ocm5>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm5>
|
||||
<Ocm6>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm6>
|
||||
<IRAM>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x20000000</StartAddress>
|
||||
<Size>0x20000</Size>
|
||||
</IRAM>
|
||||
<IROM>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x8000000</StartAddress>
|
||||
<Size>0x100000</Size>
|
||||
</IROM>
|
||||
<XRAM>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</XRAM>
|
||||
<OCR_RVCT1>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT1>
|
||||
<OCR_RVCT2>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT2>
|
||||
<OCR_RVCT3>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT3>
|
||||
<OCR_RVCT4>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x8000000</StartAddress>
|
||||
<Size>0x100000</Size>
|
||||
</OCR_RVCT4>
|
||||
<OCR_RVCT5>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT5>
|
||||
<OCR_RVCT6>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT6>
|
||||
<OCR_RVCT7>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT7>
|
||||
<OCR_RVCT8>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT8>
|
||||
<OCR_RVCT9>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x20000000</StartAddress>
|
||||
<Size>0x20000</Size>
|
||||
</OCR_RVCT9>
|
||||
<OCR_RVCT10>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x10000000</StartAddress>
|
||||
<Size>0x10000</Size>
|
||||
</OCR_RVCT10>
|
||||
</OnChipMemories>
|
||||
<RvctStartVector></RvctStartVector>
|
||||
</ArmAdsMisc>
|
||||
<Cads>
|
||||
<interw>1</interw>
|
||||
<Optim>1</Optim>
|
||||
<oTime>0</oTime>
|
||||
<SplitLS>0</SplitLS>
|
||||
<OneElfS>1</OneElfS>
|
||||
<Strict>0</Strict>
|
||||
<EnumInt>0</EnumInt>
|
||||
<PlainCh>0</PlainCh>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<wLevel>2</wLevel>
|
||||
<uThumb>0</uThumb>
|
||||
<uSurpInc>0</uSurpInc>
|
||||
<uC99>1</uC99>
|
||||
<uGnu>0</uGnu>
|
||||
<useXO>0</useXO>
|
||||
<v6Lang>1</v6Lang>
|
||||
<v6LangP>1</v6LangP>
|
||||
<vShortEn>1</vShortEn>
|
||||
<vShortWch>1</vShortWch>
|
||||
<v6Lto>0</v6Lto>
|
||||
<v6WtE>0</v6WtE>
|
||||
<v6Rtti>0</v6Rtti>
|
||||
<VariousControls>
|
||||
<MiscControls></MiscControls>
|
||||
<Define></Define>
|
||||
<Undefine></Undefine>
|
||||
<IncludePath></IncludePath>
|
||||
</VariousControls>
|
||||
</Cads>
|
||||
<Aads>
|
||||
<interw>1</interw>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<thumb>0</thumb>
|
||||
<SplitLS>0</SplitLS>
|
||||
<SwStkChk>0</SwStkChk>
|
||||
<NoWarn>0</NoWarn>
|
||||
<uSurpInc>0</uSurpInc>
|
||||
<useXO>0</useXO>
|
||||
<ClangAsOpt>4</ClangAsOpt>
|
||||
<VariousControls>
|
||||
<MiscControls></MiscControls>
|
||||
<Define></Define>
|
||||
<Undefine></Undefine>
|
||||
<IncludePath></IncludePath>
|
||||
</VariousControls>
|
||||
</Aads>
|
||||
<LDads>
|
||||
<umfTarg>0</umfTarg>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<noStLib>0</noStLib>
|
||||
<RepFail>1</RepFail>
|
||||
<useFile>0</useFile>
|
||||
<TextAddressRange>0x08000000</TextAddressRange>
|
||||
<DataAddressRange>0x20000000</DataAddressRange>
|
||||
<pXoBase></pXoBase>
|
||||
<ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
|
||||
<IncludeLibs></IncludeLibs>
|
||||
<IncludeLibsPath></IncludeLibsPath>
|
||||
<Misc></Misc>
|
||||
<LinkerInputFile></LinkerInputFile>
|
||||
<DisabledWarnings></DisabledWarnings>
|
||||
</LDads>
|
||||
</TargetArmAds>
|
||||
</TargetOption>
|
||||
<Groups>
|
||||
<Group>
|
||||
<GroupName>Source Group 1</GroupName>
|
||||
</Group>
|
||||
</Groups>
|
||||
</Target>
|
||||
</Targets>
|
||||
|
||||
<RTE>
|
||||
<apis/>
|
||||
<components/>
|
||||
<files/>
|
||||
</RTE>
|
||||
|
||||
<LayerInfo>
|
||||
<Layers>
|
||||
<Layer>
|
||||
<LayName><Project Info></LayName>
|
||||
<LayDesc></LayDesc>
|
||||
<LayUrl></LayUrl>
|
||||
<LayKeys></LayKeys>
|
||||
<LayCat></LayCat>
|
||||
<LayLic></LayLic>
|
||||
<LayTarg>0</LayTarg>
|
||||
<LayPrjMark>1</LayPrjMark>
|
||||
</Layer>
|
||||
</Layers>
|
||||
</LayerInfo>
|
||||
|
||||
</Project>
|
||||
Loading…
Reference in New Issue