libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity

ibox bsp add spi1 and fal support

This commit is contained in:
dingo1688@126.com 2019-04-07 02:07:12 +08:00
parent 7d2471c423
commit 1d152b18eb
8 changed files with 239 additions and 27 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
bsp/stm32/stm32f103-hw100k-ibox/README.md
View File

@ -41,8 +41,8 @@
| **板载外设** | **支持情况** | **备注** |
| :----------------- | :----------: | :------------------------------------- |
| 以太网 | 支持 | W5500 使用 SPI2 |
| RS485 | 支持 | 使用 UART4 |
| LoRa | 暂不支持 | 使用 SPI1 LSD4RF |
| RS485 | 支持 | MAX485 使用 UART4 |
| LoRa | 支持 | 利尔达 LSD4RF-2F717N30 使用 SPI1 |
| **片上外设** | **支持情况** | **备注** |
| GPIO | 支持 | PA0, PA1... PG15 ---> PIN: 0, 1...144 |
| UART | 支持 | UART1 |
@ -52,6 +52,7 @@
| ADC | 支持 | ADC1_CHANEL_10, ADC1_CHANNEL_11 |
| PWM | 暂不支持 | |
| IWG | 支持 | 命令：iwdg_sample wdt |
| FLASH | 支持 | 已适配 FAL |
| **扩展模块** | **支持情况** | **备注** |
| WIFI ESP8266 | 支持 | 硬十 ESP-02 使用 UART3 |
@ -114,6 +115,8 @@ msh >
- 此开发板外部高速晶振是 12MHz ;
- 使用 WIFI ESP8266 , 需将 CH_PD (PG1) 引脚拉高 ;
- 使用 W5500,需插上网线 ;
- 测试 Lora 模块，可直接使用 sx12xx 软件包 ;
- 使用 MAX485, 可使用 软件包中 串口例程，增加收发使能引脚的控制 ;
## 联系人信息

62
bsp/stm32/stm32f103-hw100k-ibox/board/CubeMX_Config/CubeMX_Config.ioc
View File

@ -10,41 +10,45 @@ KeepUserPlacement=false
Mcu.Family=STM32F1
Mcu.IP0=ADC1
Mcu.IP1=IWDG
Mcu.IP10=USART3
Mcu.IP10=USART2
Mcu.IP11=USART3
Mcu.IP2=NVIC
Mcu.IP3=RCC
Mcu.IP4=RTC
Mcu.IP5=SPI2
Mcu.IP6=SYS
Mcu.IP7=UART4
Mcu.IP8=USART1
Mcu.IP9=USART2
Mcu.IPNb=11
Mcu.IP5=SPI1
Mcu.IP6=SPI2
Mcu.IP7=SYS
Mcu.IP8=UART4
Mcu.IP9=USART1
Mcu.IPNb=12
Mcu.Name=STM32F103Z(C-D-E)Tx
Mcu.Package=LQFP144
Mcu.Pin0=PC14-OSC32_IN
Mcu.Pin1=PC15-OSC32_OUT
Mcu.Pin10=PB13
Mcu.Pin11=PB14
Mcu.Pin12=PB15
Mcu.Pin13=PA9
Mcu.Pin14=PA10
Mcu.Pin15=PA13
Mcu.Pin16=PA14
Mcu.Pin17=PC10
Mcu.Pin18=PC11
Mcu.Pin19=VP_IWDG_VS_IWDG
Mcu.Pin10=PA7
Mcu.Pin11=PB10
Mcu.Pin12=PB11
Mcu.Pin13=PB13
Mcu.Pin14=PB14
Mcu.Pin15=PB15
Mcu.Pin16=PA9
Mcu.Pin17=PA10
Mcu.Pin18=PA13
Mcu.Pin19=PA14
Mcu.Pin2=OSC_IN
Mcu.Pin20=VP_RTC_VS_RTC_Activate
Mcu.Pin21=VP_SYS_VS_Systick
Mcu.Pin20=PC10
Mcu.Pin21=PC11
Mcu.Pin22=VP_IWDG_VS_IWDG
Mcu.Pin23=VP_RTC_VS_RTC_Activate
Mcu.Pin24=VP_SYS_VS_Systick
Mcu.Pin3=OSC_OUT
Mcu.Pin4=PC0
Mcu.Pin5=PC1
Mcu.Pin6=PA2
Mcu.Pin7=PA3
Mcu.Pin8=PB10
Mcu.Pin9=PB11
Mcu.PinsNb=22
Mcu.Pin8=PA5
Mcu.Pin9=PA6
Mcu.PinsNb=25
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32F103ZETx
@ -74,6 +78,12 @@ PA2.Mode=Asynchronous
PA2.Signal=USART2_TX
PA3.Mode=Asynchronous
PA3.Signal=USART2_RX
PA5.Mode=Full_Duplex_Master
PA5.Signal=SPI1_SCK
PA6.Mode=Full_Duplex_Master
PA6.Signal=SPI1_MISO
PA7.Mode=Full_Duplex_Master
PA7.Signal=SPI1_MOSI
PA9.Mode=Asynchronous
PA9.Signal=USART1_TX
PB10.Mode=Asynchronous
@ -132,7 +142,7 @@ ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=MDK-ARM V5
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_ADC1_Init-ADC1-false-HAL-true,6-MX_IWDG_Init-IWDG-false-HAL-true,7-MX_USART3_UART_Init-USART3-false-HAL-true,8-MX_SPI2_Init-SPI2-false-HAL-true,9-MX_UART4_Init-UART4-false-HAL-true,10-MX_USART2_UART_Init-USART2-false-HAL-true
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_ADC1_Init-ADC1-false-HAL-true,6-MX_IWDG_Init-IWDG-false-HAL-true,7-MX_USART3_UART_Init-USART3-false-HAL-true,8-MX_SPI2_Init-SPI2-false-HAL-true,9-MX_UART4_Init-UART4-false-HAL-true,10-MX_USART2_UART_Init-USART2-false-HAL-true,11-MX_SPI1_Init-SPI1-false-HAL-true
RCC.ADCFreqValue=12000000
RCC.ADCPresc=RCC_ADCPCLK2_DIV6
RCC.AHBFreq_Value=72000000
@ -167,6 +177,12 @@ SH.ADCx_IN10.0=ADC1_IN10,IN10
SH.ADCx_IN10.ConfNb=1
SH.ADCx_IN11.0=ADC1_IN11,IN11
SH.ADCx_IN11.ConfNb=1
SPI1.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_8
SPI1.CalculateBaudRate=9.0 MBits/s
SPI1.Direction=SPI_DIRECTION_2LINES
SPI1.IPParameters=VirtualType,Mode,Direction,BaudRatePrescaler,CalculateBaudRate
SPI1.Mode=SPI_MODE_MASTER
SPI1.VirtualType=VM_MASTER
SPI2.CalculateBaudRate=18.0 MBits/s
SPI2.Direction=SPI_DIRECTION_2LINES
SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate

41
bsp/stm32/stm32f103-hw100k-ibox/board/CubeMX_Config/Src/main.c
View File

@ -68,6 +68,7 @@ IWDG_HandleTypeDef hiwdg;
RTC_HandleTypeDef hrtc;
SPI_HandleTypeDef hspi1;
SPI_HandleTypeDef hspi2;
UART_HandleTypeDef huart4;
@ -90,6 +91,7 @@ static void MX_USART3_UART_Init(void);
static void MX_SPI2_Init(void);
static void MX_UART4_Init(void);
static void MX_USART2_UART_Init(void);
static void MX_SPI1_Init(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
@ -135,6 +137,7 @@ int main(void)
MX_SPI2_Init();
MX_UART4_Init();
MX_USART2_UART_Init();
MX_SPI1_Init();
/* USER CODE BEGIN 2 */
/* USER CODE END 2 */
@ -301,6 +304,44 @@ static void MX_RTC_Init(void)
}
/**
* @brief SPI1 Initialization Function
* @param None
* @retval None
*/
static void MX_SPI1_Init(void)
{
/* USER CODE BEGIN SPI1_Init 0 */
/* USER CODE END SPI1_Init 0 */
/* USER CODE BEGIN SPI1_Init 1 */
/* USER CODE END SPI1_Init 1 */
/* SPI1 parameter configuration*/
hspi1.Instance = SPI1;
hspi1.Init.Mode = SPI_MODE_MASTER;
hspi1.Init.Direction = SPI_DIRECTION_2LINES;
hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
hspi1.Init.NSS = SPI_NSS_SOFT;
hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8;
hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
hspi1.Init.CRCPolynomial = 10;
if (HAL_SPI_Init(&hspi1) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN SPI1_Init 2 */
/* USER CODE END SPI1_Init 2 */
}
/**
* @brief SPI2 Initialization Function
* @param None

51
bsp/stm32/stm32f103-hw100k-ibox/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
View File

@ -226,7 +226,35 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hspi->Instance==SPI2)
if(hspi->Instance==SPI1)
{
/* USER CODE BEGIN SPI1_MspInit 0 */
/* USER CODE END SPI1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SPI1_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/**SPI1 GPIO Configuration
PA5 ------> SPI1_SCK
PA6 ------> SPI1_MISO
PA7 ------> SPI1_MOSI
*/
GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_6;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USER CODE BEGIN SPI1_MspInit 1 */
/* USER CODE END SPI1_MspInit 1 */
}
else if(hspi->Instance==SPI2)
{
/* USER CODE BEGIN SPI2_MspInit 0 */
@ -267,7 +295,26 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
{
if(hspi->Instance==SPI2)
if(hspi->Instance==SPI1)
{
/* USER CODE BEGIN SPI1_MspDeInit 0 */
/* USER CODE END SPI1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SPI1_CLK_DISABLE();
/**SPI1 GPIO Configuration
PA5 ------> SPI1_SCK
PA6 ------> SPI1_MISO
PA7 ------> SPI1_MOSI
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
/* USER CODE BEGIN SPI1_MspDeInit 1 */
/* USER CODE END SPI1_MspDeInit 1 */
}
else if(hspi->Instance==SPI2)
{
/* USER CODE BEGIN SPI2_MspDeInit 0 */

46
bsp/stm32/stm32f103-hw100k-ibox/board/Kconfig
View File

@ -36,6 +36,49 @@ menu "Onboard Peripheral Drivers"
default 0x00
endif
config BSP_USING_LORA
bool "Enable LoRa Driver (spi1)"
default n
select PKG_USING_SX12XX
select SX12XX_DEVICE_EXTERN_CONFIG
select BSP_USING_SPI1
if BSP_USING_LORA
if SX12XX_DEVICE_EXTERN_CONFIG
config SX12XX_SPI_DEVICE
string "SPI device name"
default "spi10"
config SX12XX_RST_PIN
int "Reset PIN number"
default 7
config SX12XX_DO0_PIN
int "DO0 PIN number"
default 103
config SX12XX_DO1_PIN
int "DO1 PIN number"
default 104
config SX12XX_DO2_PIN
int "DO2 PIN number"
default 105
config SX12XX_DO3_PIN
int "DO3 PIN number"
default 106
config SX12XX_DO4_PIN
int "DO4 PIN number"
default 107
config SX12XX_DO5_PIN
int "DO5 PIN number"
default 108
endif
endif
endmenu
menu "On-chip Peripheral Drivers"
@ -84,6 +127,9 @@ menu "On-chip Peripheral Drivers"
bool "Enable UART4 RX DMA"
depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA
endif
config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH"
default n
menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)"
default n

3
bsp/stm32/stm32f103-hw100k-ibox/board/SConscript
View File

@ -16,6 +16,9 @@ if GetDepend(['BSP_USING_ETH']):
if GetDepend(['BSP_USING_WIFI_OR_GPRS']):
src += Glob('ports/esp02_device.c')
if GetDepend(['BSP_USING_ON_CHIP_FLASH']):
src += Glob('ports/on_chip_flash_init.c')
path = [cwd]
path += [cwd + '/CubeMX_Config/Inc']
path += [cwd + '/ports']

34
bsp/stm32/stm32f103-hw100k-ibox/board/ports/fal_cfg.h Normal file
View File

@ -0,0 +1,34 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-12-5 SummerGift first version
*/
#ifndef _FAL_CFG_H_
#define _FAL_CFG_H_
#include <rtthread.h>
#include <board.h>
extern const struct fal_flash_dev stm32_onchip_flash;
/* flash device table */
#define FAL_FLASH_DEV_TABLE \
{ \
&stm32_onchip_flash, \
}
/* ====================== Partition Configuration ========================== */
#ifdef FAL_PART_HAS_TABLE_CFG
/* partition table */
#define FAL_PART_TABLE \
{ \
{FAL_PART_MAGIC_WROD, "app", "onchip_flash", 0, 496 * 1024, 0}, \
{FAL_PART_MAGIC_WROD, "param", "onchip_flash", 496* 1024 , 16 * 1024, 0}, \
}
#endif /* FAL_PART_HAS_TABLE_CFG */
#endif /* _FAL_CFG_H_ */

22
bsp/stm32/stm32f103-hw100k-ibox/board/ports/on_chip_flash_init.c Normal file
View File

@ -0,0 +1,22 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-11-27 SummerGift add spi flash port file
*/
#include <rtthread.h>
#include "fal.h"
#if defined(BSP_USING_ON_CHIP_FLASH)
static int rt_hw_on_chip_flash_init(void)
{
fal_init();
return RT_EOK;
}
INIT_COMPONENT_EXPORT(rt_hw_on_chip_flash_init);
#endif