bsp:cvitek: add pinmux for uart
Board level UART pinmux summary, following capability should be controlled by pinname whitelist. Duo: NAME UART CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- GP13 UART0_RX XGPIOA[17] UART0_RX__UART0_RX GP12 UART0_TX XGPIOA[16] UART0_TX__UART0_TX GP1 UART1_RX XGPIOA[29] IIC0_SDA__UART1_RX GP13 UART1_RX XGPIOA[17] UART0_RX__UART1_RX GP0 UART1_TX XGPIOA[28] IIC0_SCL__UART1_TX GP12 UART1_TX XGPIOA[16] UART0_TX__UART1_TX GP1 UART2_RX XGPIOA[29] IIC0_SDA__UART2_RX GP5 UART2_RX PWR_GPIO[20] SD1_D1__UART2_RX GP0 UART2_TX XGPIOA[28] IIC0_SCL__UART2_TX GP4 UART2_TX PWR_GPIO[19] SD1_D2__UART2_TX GP5 UART3_RX PWR_GPIO[20] SD1_D1__UART3_RX GP4 UART3_TX PWR_GPIO[19] SD1_D2__UART3_TX GP3 UART4_RX PWR_GPIO[25] SD1_GPIO0__UART4_RX GP2 UART4_TX PWR_GPIO[26] SD1_GPIO1__UART4_TX Duo 256m: NAME UART CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- GP13 UART0_RX XGPIOA[17] UART0_RX__UART0_RX GP12 UART0_TX XGPIOA[16] UART0_TX__UART0_TX GP1 UART1_RX XGPIOA[29] IIC0_SDA__UART1_RX GP3 UART1_RX XGPIOA[18] JTAG_CPU_TCK__UART1_RX GP13 UART1_RX XGPIOA[17] UART0_RX__UART1_RX GP0 UART1_TX XGPIOA[28] IIC0_SCL__UART1_TX GP2 UART1_TX XGPIOA[19] JTAG_CPU_TMS__UART1_TX GP12 UART1_TX XGPIOA[16] UART0_TX__UART1_TX GP1 UART2_RX XGPIOA[29] IIC0_SDA__UART2_RX GP5 UART2_RX PWR_GPIO[20] SD1_D1__UART2_RX GP0 UART2_TX XGPIOA[28] IIC0_SCL__UART2_TX GP4 UART2_TX PWR_GPIO[19] SD1_D2__UART2_TX GP5 UART3_RX PWR_GPIO[20] SD1_D1__UART3_RX GP4 UART3_TX PWR_GPIO[19] SD1_D2__UART3_TX Note: this patch also update the .config and rtconfig.h because this patch modify some configuration items's name, for example: RT_USIMG_UART0 -> BSP_USING_UART0. FIXME: only handle RISC-V related, no ARM. Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
This commit is contained in:
Chen Wang
Rbb666
parent
e1eb3d3217
commit
114e143d56
|
|
@ -15,7 +15,6 @@ CONFIG_RT_THREAD_PRIORITY_32=y
|
|||
# CONFIG_RT_THREAD_PRIORITY_256 is not set
|
||||
CONFIG_RT_THREAD_PRIORITY_MAX=32
|
||||
CONFIG_RT_TICK_PER_SECOND=1000
|
||||
CONFIG_RT_USING_OVERFLOW_CHECK=y
|
||||
CONFIG_RT_USING_HOOK=y
|
||||
CONFIG_RT_HOOK_USING_FUNC_PTR=y
|
||||
# CONFIG_RT_USING_HOOKLIST is not set
|
||||
|
|
@ -25,6 +24,8 @@ CONFIG_IDLE_THREAD_STACK_SIZE=1024
|
|||
CONFIG_RT_USING_TIMER_SOFT=y
|
||||
CONFIG_RT_TIMER_THREAD_PRIO=4
|
||||
CONFIG_RT_TIMER_THREAD_STACK_SIZE=2048
|
||||
# CONFIG_RT_USING_TIMER_ALL_SOFT is not set
|
||||
# CONFIG_RT_USING_CPU_USAGE_TRACER is not set
|
||||
|
||||
#
|
||||
# kservice optimization
|
||||
|
|
@ -45,6 +46,7 @@ CONFIG_RT_DEBUGING_ASSERT=y
|
|||
CONFIG_RT_DEBUGING_COLOR=y
|
||||
CONFIG_RT_DEBUGING_CONTEXT=y
|
||||
# CONFIG_RT_DEBUGING_AUTO_INIT is not set
|
||||
CONFIG_RT_USING_OVERFLOW_CHECK=y
|
||||
|
||||
#
|
||||
# Inter-Thread communication
|
||||
|
|
@ -131,6 +133,7 @@ CONFIG_FINSH_USING_OPTION_COMPLETION=y
|
|||
# Device Drivers
|
||||
#
|
||||
# CONFIG_RT_USING_DM is not set
|
||||
# CONFIG_RT_USING_DEV_BUS is not set
|
||||
CONFIG_RT_USING_DEVICE_IPC=y
|
||||
CONFIG_RT_UNAMED_PIPE_NUMBER=64
|
||||
# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
|
||||
|
|
@ -149,6 +152,8 @@ CONFIG_RT_SERIAL_RB_BUFSZ=64
|
|||
# CONFIG_RT_USING_ZERO is not set
|
||||
# CONFIG_RT_USING_RANDOM is not set
|
||||
# CONFIG_RT_USING_PWM is not set
|
||||
# CONFIG_RT_USING_PULSE_ENCODER is not set
|
||||
# CONFIG_RT_USING_INPUT_CAPTURE is not set
|
||||
# CONFIG_RT_USING_MTD_NOR is not set
|
||||
# CONFIG_RT_USING_MTD_NAND is not set
|
||||
# CONFIG_RT_USING_PM is not set
|
||||
|
|
@ -161,21 +166,12 @@ CONFIG_RT_SERIAL_RB_BUFSZ=64
|
|||
# CONFIG_RT_USING_TOUCH is not set
|
||||
# CONFIG_RT_USING_LCD is not set
|
||||
# CONFIG_RT_USING_HWCRYPTO is not set
|
||||
# CONFIG_RT_USING_PULSE_ENCODER is not set
|
||||
# CONFIG_RT_USING_INPUT_CAPTURE is not set
|
||||
# CONFIG_RT_USING_DEV_BUS is not set
|
||||
# CONFIG_RT_USING_WIFI is not set
|
||||
# CONFIG_RT_USING_VIRTIO is not set
|
||||
CONFIG_RT_USING_PIN=y
|
||||
# CONFIG_RT_USING_KTIME is not set
|
||||
# CONFIG_RT_USING_HWTIMER is not set
|
||||
|
||||
#
|
||||
# Using USB
|
||||
#
|
||||
# CONFIG_RT_USING_USB_HOST is not set
|
||||
# CONFIG_RT_USING_USB_DEVICE is not set
|
||||
# end of Using USB
|
||||
# CONFIG_RT_USING_CHERRYUSB is not set
|
||||
# end of Device Drivers
|
||||
|
||||
#
|
||||
|
|
@ -252,6 +248,15 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
|
|||
# end of Utilities
|
||||
|
||||
# CONFIG_RT_USING_VBUS is not set
|
||||
|
||||
#
|
||||
# Using USB legacy version
|
||||
#
|
||||
# CONFIG_RT_USING_USB_HOST is not set
|
||||
# CONFIG_RT_USING_USB_DEVICE is not set
|
||||
# end of Using USB legacy version
|
||||
|
||||
# CONFIG_RT_USING_FDT is not set
|
||||
# end of RT-Thread Components
|
||||
|
||||
#
|
||||
|
|
@ -279,6 +284,7 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
|
|||
# CONFIG_PKG_USING_WEBTERMINAL is not set
|
||||
# CONFIG_PKG_USING_FREEMODBUS is not set
|
||||
# CONFIG_PKG_USING_NANOPB is not set
|
||||
# CONFIG_PKG_USING_WIFI_HOST_DRIVER is not set
|
||||
|
||||
#
|
||||
# Wi-Fi
|
||||
|
|
@ -383,6 +389,7 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
|
|||
# CONFIG_PKG_USING_ZEPHYR_POLLING is not set
|
||||
# CONFIG_PKG_USING_MATTER_ADAPTATION_LAYER is not set
|
||||
# CONFIG_PKG_USING_LHC_MODBUS is not set
|
||||
# CONFIG_PKG_USING_QMODBUS is not set
|
||||
# end of IoT - internet of things
|
||||
|
||||
#
|
||||
|
|
@ -528,6 +535,8 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
|
|||
# CONFIG_PKG_USING_RT_VSNPRINTF_FULL is not set
|
||||
# end of enhanced kernel services
|
||||
|
||||
# CONFIG_PKG_USING_AUNITY is not set
|
||||
|
||||
#
|
||||
# acceleration: Assembly language or algorithmic acceleration packages
|
||||
#
|
||||
|
|
@ -618,11 +627,27 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
|
|||
#
|
||||
# STM32 HAL & SDK Drivers
|
||||
#
|
||||
# CONFIG_PKG_USING_STM32L4XX_HAL_DRIVER is not set
|
||||
# CONFIG_PKG_USING_STM32L4_HAL_DRIVER is not set
|
||||
# CONFIG_PKG_USING_STM32L4_CMSIS_DRIVER is not set
|
||||
# CONFIG_PKG_USING_STM32WB55_SDK is not set
|
||||
# CONFIG_PKG_USING_STM32_SDIO is not set
|
||||
# end of STM32 HAL & SDK Drivers
|
||||
|
||||
#
|
||||
# Infineon HAL Packages
|
||||
#
|
||||
# CONFIG_PKG_USING_INFINEON_CAT1CM0P is not set
|
||||
# CONFIG_PKG_USING_INFINEON_CMSIS is not set
|
||||
# CONFIG_PKG_USING_INFINEON_CORE_LIB is not set
|
||||
# CONFIG_PKG_USING_INFINEON_MTB_HAL_CAT1 is not set
|
||||
# CONFIG_PKG_USING_INFINEON_MTB_PDL_CAT1 is not set
|
||||
# CONFIG_PKG_USING_INFINEON_RETARGET_IO is not set
|
||||
# CONFIG_PKG_USING_INFINEON_CAPSENSE is not set
|
||||
# CONFIG_PKG_USING_INFINEON_CSDIDAC is not set
|
||||
# CONFIG_PKG_USING_INFINEON_SERIAL_FLASH is not set
|
||||
# CONFIG_PKG_USING_INFINEON_USBDEV is not set
|
||||
# end of Infineon HAL Packages
|
||||
|
||||
# CONFIG_PKG_USING_BLUETRUM_SDK is not set
|
||||
# CONFIG_PKG_USING_EMBARC_BSP is not set
|
||||
# CONFIG_PKG_USING_ESP_IDF is not set
|
||||
|
|
@ -817,6 +842,7 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
|
|||
#
|
||||
# Signal Processing and Control Algorithm Packages
|
||||
#
|
||||
# CONFIG_PKG_USING_APID is not set
|
||||
# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
|
||||
# CONFIG_PKG_USING_QPID is not set
|
||||
# CONFIG_PKG_USING_UKAL is not set
|
||||
|
|
@ -1133,8 +1159,13 @@ CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
|
|||
# General Drivers Configuration
|
||||
#
|
||||
CONFIG_BSP_USING_UART=y
|
||||
# CONFIG_RT_USING_UART0 is not set
|
||||
CONFIG_RT_USING_UART1=y
|
||||
# CONFIG_BSP_USING_UART0 is not set
|
||||
CONFIG_BSP_USING_UART1=y
|
||||
CONFIG_BSP_UART1_RX_PINNAME="IIC0_SDA"
|
||||
CONFIG_BSP_UART1_TX_PINNAME="IIC0_SCL"
|
||||
# CONFIG_BSP_USING_UART2 is not set
|
||||
# CONFIG_BSP_USING_UART3 is not set
|
||||
# CONFIG_BSP_USING_UART4 is not set
|
||||
CONFIG_UART_IRQ_BASE=30
|
||||
# CONFIG_BSP_USING_I2C is not set
|
||||
# CONFIG_BSP_USING_ADC is not set
|
||||
|
|
|
|||
|
|
@ -6,14 +6,71 @@ menu "General Drivers Configuration"
|
|||
default y
|
||||
|
||||
if BSP_USING_UART
|
||||
config RT_USING_UART0
|
||||
config BSP_USING_UART0
|
||||
bool "Enable UART 0"
|
||||
default n
|
||||
|
||||
config RT_USING_UART1
|
||||
if BSP_USING_UART0
|
||||
config BSP_UART0_RX_PINNAME
|
||||
string "uart0 rx pin name"
|
||||
default ""
|
||||
config BSP_UART0_TX_PINNAME
|
||||
string "uart0 tx pin name"
|
||||
default ""
|
||||
endif
|
||||
|
||||
config BSP_USING_UART1
|
||||
bool "Enable UART 1"
|
||||
default y
|
||||
|
||||
if BSP_USING_UART1
|
||||
config BSP_UART1_RX_PINNAME
|
||||
string "uart1 rx pin name"
|
||||
default "IIC0_SDA"
|
||||
config BSP_UART1_TX_PINNAME
|
||||
string "uart1 tx pin name"
|
||||
default "IIC0_SCL"
|
||||
endif
|
||||
|
||||
config BSP_USING_UART2
|
||||
bool "Enable UART 2"
|
||||
default n
|
||||
|
||||
if BSP_USING_UART2
|
||||
config BSP_UART2_RX_PINNAME
|
||||
string "uart2 rx pin name"
|
||||
default ""
|
||||
config BSP_UART2_TX_PINNAME
|
||||
string "uart2 tx pin name"
|
||||
default ""
|
||||
endif
|
||||
|
||||
config BSP_USING_UART3
|
||||
bool "Enable UART 3"
|
||||
default n
|
||||
|
||||
if BSP_USING_UART3
|
||||
config BSP_UART3_RX_PINNAME
|
||||
string "uart3 rx pin name"
|
||||
default ""
|
||||
config BSP_UART3_TX_PINNAME
|
||||
string "uart3 tx pin name"
|
||||
default ""
|
||||
endif
|
||||
|
||||
config BSP_USING_UART4
|
||||
bool "Enable UART 4"
|
||||
default n
|
||||
|
||||
if BSP_USING_UART4
|
||||
config BSP_UART4_RX_PINNAME
|
||||
string "uart4 rx pin name"
|
||||
default ""
|
||||
config BSP_UART4_TX_PINNAME
|
||||
string "uart4 tx pin name"
|
||||
default ""
|
||||
endif
|
||||
|
||||
config UART_IRQ_BASE
|
||||
int
|
||||
default 30
|
||||
|
|
|
|||
|
|
@ -9,7 +9,6 @@
|
|||
#define RT_THREAD_PRIORITY_32
|
||||
#define RT_THREAD_PRIORITY_MAX 32
|
||||
#define RT_TICK_PER_SECOND 1000
|
||||
#define RT_USING_OVERFLOW_CHECK
|
||||
#define RT_USING_HOOK
|
||||
#define RT_HOOK_USING_FUNC_PTR
|
||||
#define RT_USING_IDLE_HOOK
|
||||
|
|
@ -31,6 +30,7 @@
|
|||
#define RT_DEBUGING_ASSERT
|
||||
#define RT_DEBUGING_COLOR
|
||||
#define RT_DEBUGING_CONTEXT
|
||||
#define RT_USING_OVERFLOW_CHECK
|
||||
|
||||
/* Inter-Thread communication */
|
||||
|
||||
|
|
@ -95,10 +95,6 @@
|
|||
#define RT_SERIAL_USING_DMA
|
||||
#define RT_SERIAL_RB_BUFSZ 64
|
||||
#define RT_USING_PIN
|
||||
|
||||
/* Using USB */
|
||||
|
||||
/* end of Using USB */
|
||||
/* end of Device Drivers */
|
||||
|
||||
/* C/C++ and POSIX layer */
|
||||
|
|
@ -137,6 +133,10 @@
|
|||
/* Utilities */
|
||||
|
||||
/* end of Utilities */
|
||||
|
||||
/* Using USB legacy version */
|
||||
|
||||
/* end of Using USB legacy version */
|
||||
/* end of RT-Thread Components */
|
||||
|
||||
/* RT-Thread Utestcases */
|
||||
|
|
@ -233,6 +233,10 @@
|
|||
|
||||
/* end of STM32 HAL & SDK Drivers */
|
||||
|
||||
/* Infineon HAL Packages */
|
||||
|
||||
/* end of Infineon HAL Packages */
|
||||
|
||||
/* Kendryte SDK */
|
||||
|
||||
/* end of Kendryte SDK */
|
||||
|
|
@ -319,7 +323,9 @@
|
|||
/* General Drivers Configuration */
|
||||
|
||||
#define BSP_USING_UART
|
||||
#define RT_USING_UART1
|
||||
#define BSP_USING_UART1
|
||||
#define BSP_UART1_RX_PINNAME "IIC0_SDA"
|
||||
#define BSP_UART1_TX_PINNAME "IIC0_SCL"
|
||||
#define UART_IRQ_BASE 30
|
||||
/* end of General Drivers Configuration */
|
||||
#define BSP_USING_C906_LITTLE
|
||||
|
|
|
|||
|
|
@ -15,7 +15,6 @@ CONFIG_RT_THREAD_PRIORITY_32=y
|
|||
# CONFIG_RT_THREAD_PRIORITY_256 is not set
|
||||
CONFIG_RT_THREAD_PRIORITY_MAX=32
|
||||
CONFIG_RT_TICK_PER_SECOND=1000
|
||||
CONFIG_RT_USING_OVERFLOW_CHECK=y
|
||||
CONFIG_RT_USING_HOOK=y
|
||||
CONFIG_RT_HOOK_USING_FUNC_PTR=y
|
||||
# CONFIG_RT_USING_HOOKLIST is not set
|
||||
|
|
@ -25,6 +24,8 @@ CONFIG_IDLE_THREAD_STACK_SIZE=8192
|
|||
CONFIG_RT_USING_TIMER_SOFT=y
|
||||
CONFIG_RT_TIMER_THREAD_PRIO=4
|
||||
CONFIG_RT_TIMER_THREAD_STACK_SIZE=8192
|
||||
# CONFIG_RT_USING_TIMER_ALL_SOFT is not set
|
||||
# CONFIG_RT_USING_CPU_USAGE_TRACER is not set
|
||||
|
||||
#
|
||||
# kservice optimization
|
||||
|
|
@ -46,6 +47,7 @@ CONFIG_RT_DEBUGING_COLOR=y
|
|||
CONFIG_RT_DEBUGING_CONTEXT=y
|
||||
# CONFIG_RT_DEBUGING_AUTO_INIT is not set
|
||||
# CONFIG_RT_DEBUGING_PAGE_LEAK is not set
|
||||
CONFIG_RT_USING_OVERFLOW_CHECK=y
|
||||
|
||||
#
|
||||
# Inter-Thread communication
|
||||
|
|
@ -170,6 +172,7 @@ CONFIG_RT_USING_DFS_ROMFS=y
|
|||
# Device Drivers
|
||||
#
|
||||
# CONFIG_RT_USING_DM is not set
|
||||
# CONFIG_RT_USING_DEV_BUS is not set
|
||||
CONFIG_RT_USING_DEVICE_IPC=y
|
||||
CONFIG_RT_UNAMED_PIPE_NUMBER=64
|
||||
CONFIG_RT_USING_SYSTEM_WORKQUEUE=y
|
||||
|
|
@ -190,6 +193,8 @@ CONFIG_RT_USING_NULL=y
|
|||
CONFIG_RT_USING_ZERO=y
|
||||
CONFIG_RT_USING_RANDOM=y
|
||||
# CONFIG_RT_USING_PWM is not set
|
||||
# CONFIG_RT_USING_PULSE_ENCODER is not set
|
||||
# CONFIG_RT_USING_INPUT_CAPTURE is not set
|
||||
# CONFIG_RT_USING_MTD_NOR is not set
|
||||
# CONFIG_RT_USING_MTD_NAND is not set
|
||||
# CONFIG_RT_USING_PM is not set
|
||||
|
|
@ -210,21 +215,12 @@ CONFIG_RT_MMCSD_MAX_PARTITION=16
|
|||
# CONFIG_RT_USING_TOUCH is not set
|
||||
# CONFIG_RT_USING_LCD is not set
|
||||
# CONFIG_RT_USING_HWCRYPTO is not set
|
||||
# CONFIG_RT_USING_PULSE_ENCODER is not set
|
||||
# CONFIG_RT_USING_INPUT_CAPTURE is not set
|
||||
# CONFIG_RT_USING_DEV_BUS is not set
|
||||
# CONFIG_RT_USING_WIFI is not set
|
||||
# CONFIG_RT_USING_VIRTIO is not set
|
||||
CONFIG_RT_USING_PIN=y
|
||||
CONFIG_RT_USING_KTIME=y
|
||||
# CONFIG_RT_USING_HWTIMER is not set
|
||||
|
||||
#
|
||||
# Using USB
|
||||
#
|
||||
# CONFIG_RT_USING_USB_HOST is not set
|
||||
# CONFIG_RT_USING_USB_DEVICE is not set
|
||||
# end of Using USB
|
||||
# CONFIG_RT_USING_CHERRYUSB is not set
|
||||
# end of Device Drivers
|
||||
|
||||
#
|
||||
|
|
@ -393,6 +389,15 @@ CONFIG_RT_USING_ADT_REF=y
|
|||
# end of Utilities
|
||||
|
||||
# CONFIG_RT_USING_VBUS is not set
|
||||
|
||||
#
|
||||
# Using USB legacy version
|
||||
#
|
||||
# CONFIG_RT_USING_USB_HOST is not set
|
||||
# CONFIG_RT_USING_USB_DEVICE is not set
|
||||
# end of Using USB legacy version
|
||||
|
||||
# CONFIG_RT_USING_FDT is not set
|
||||
# end of RT-Thread Components
|
||||
|
||||
#
|
||||
|
|
@ -420,6 +425,7 @@ CONFIG_RT_USING_ADT_REF=y
|
|||
# CONFIG_PKG_USING_WEBTERMINAL is not set
|
||||
# CONFIG_PKG_USING_FREEMODBUS is not set
|
||||
# CONFIG_PKG_USING_NANOPB is not set
|
||||
# CONFIG_PKG_USING_WIFI_HOST_DRIVER is not set
|
||||
|
||||
#
|
||||
# Wi-Fi
|
||||
|
|
@ -524,6 +530,7 @@ CONFIG_RT_USING_ADT_REF=y
|
|||
# CONFIG_PKG_USING_ZEPHYR_POLLING is not set
|
||||
# CONFIG_PKG_USING_MATTER_ADAPTATION_LAYER is not set
|
||||
# CONFIG_PKG_USING_LHC_MODBUS is not set
|
||||
# CONFIG_PKG_USING_QMODBUS is not set
|
||||
# end of IoT - internet of things
|
||||
|
||||
#
|
||||
|
|
@ -669,6 +676,8 @@ CONFIG_RT_USING_ADT_REF=y
|
|||
# CONFIG_PKG_USING_RT_VSNPRINTF_FULL is not set
|
||||
# end of enhanced kernel services
|
||||
|
||||
# CONFIG_PKG_USING_AUNITY is not set
|
||||
|
||||
#
|
||||
# acceleration: Assembly language or algorithmic acceleration packages
|
||||
#
|
||||
|
|
@ -759,11 +768,27 @@ CONFIG_RT_USING_ADT_REF=y
|
|||
#
|
||||
# STM32 HAL & SDK Drivers
|
||||
#
|
||||
# CONFIG_PKG_USING_STM32L4XX_HAL_DRIVER is not set
|
||||
# CONFIG_PKG_USING_STM32L4_HAL_DRIVER is not set
|
||||
# CONFIG_PKG_USING_STM32L4_CMSIS_DRIVER is not set
|
||||
# CONFIG_PKG_USING_STM32WB55_SDK is not set
|
||||
# CONFIG_PKG_USING_STM32_SDIO is not set
|
||||
# end of STM32 HAL & SDK Drivers
|
||||
|
||||
#
|
||||
# Infineon HAL Packages
|
||||
#
|
||||
# CONFIG_PKG_USING_INFINEON_CAT1CM0P is not set
|
||||
# CONFIG_PKG_USING_INFINEON_CMSIS is not set
|
||||
# CONFIG_PKG_USING_INFINEON_CORE_LIB is not set
|
||||
# CONFIG_PKG_USING_INFINEON_MTB_HAL_CAT1 is not set
|
||||
# CONFIG_PKG_USING_INFINEON_MTB_PDL_CAT1 is not set
|
||||
# CONFIG_PKG_USING_INFINEON_RETARGET_IO is not set
|
||||
# CONFIG_PKG_USING_INFINEON_CAPSENSE is not set
|
||||
# CONFIG_PKG_USING_INFINEON_CSDIDAC is not set
|
||||
# CONFIG_PKG_USING_INFINEON_SERIAL_FLASH is not set
|
||||
# CONFIG_PKG_USING_INFINEON_USBDEV is not set
|
||||
# end of Infineon HAL Packages
|
||||
|
||||
# CONFIG_PKG_USING_BLUETRUM_SDK is not set
|
||||
# CONFIG_PKG_USING_EMBARC_BSP is not set
|
||||
# CONFIG_PKG_USING_ESP_IDF is not set
|
||||
|
|
@ -958,6 +983,7 @@ CONFIG_RT_USING_ADT_REF=y
|
|||
#
|
||||
# Signal Processing and Control Algorithm Packages
|
||||
#
|
||||
# CONFIG_PKG_USING_APID is not set
|
||||
# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
|
||||
# CONFIG_PKG_USING_QPID is not set
|
||||
# CONFIG_PKG_USING_UKAL is not set
|
||||
|
|
@ -1274,12 +1300,14 @@ CONFIG_RT_USING_ADT_REF=y
|
|||
# General Drivers Configuration
|
||||
#
|
||||
CONFIG_BSP_USING_UART=y
|
||||
CONFIG_RT_USING_UART0=y
|
||||
CONFIG_BSP_USING_UART0=y
|
||||
CONFIG_BSP_UART0_RX_PINNAME="UART0_RX"
|
||||
CONFIG_BSP_UART0_TX_PINNAME="UART0_TX"
|
||||
# CONFIG_BSP_USING_UART1 is not set
|
||||
# CONFIG_BSP_USING_UART2 is not set
|
||||
# CONFIG_BSP_USING_UART3 is not set
|
||||
# CONFIG_BSP_USING_UART4 is not set
|
||||
CONFIG_UART_IRQ_BASE=44
|
||||
# CONFIG_RT_USING_UART1 is not set
|
||||
# CONFIG_RT_USING_UART2 is not set
|
||||
# CONFIG_RT_USING_UART3 is not set
|
||||
# CONFIG_RT_USING_UART4 is not set
|
||||
# CONFIG_BSP_USING_I2C is not set
|
||||
# CONFIG_BSP_USING_ADC is not set
|
||||
# CONFIG_BSP_USING_SPI is not set
|
||||
|
|
|
|||
|
|
@ -6,30 +6,74 @@ menu "General Drivers Configuration"
|
|||
default y
|
||||
|
||||
if BSP_USING_UART
|
||||
config RT_USING_UART0
|
||||
config BSP_USING_UART0
|
||||
bool "Enable UART 0"
|
||||
default y
|
||||
|
||||
if BSP_USING_UART0
|
||||
config BSP_UART0_RX_PINNAME
|
||||
string "uart0 rx pin name"
|
||||
default "UART0_RX"
|
||||
config BSP_UART0_TX_PINNAME
|
||||
string "uart0 tx pin name"
|
||||
default "UART0_TX"
|
||||
endif
|
||||
|
||||
config BSP_USING_UART1
|
||||
bool "Enable UART 1"
|
||||
default n
|
||||
|
||||
if BSP_USING_UART1
|
||||
config BSP_UART1_RX_PINNAME
|
||||
string "uart1 rx pin name"
|
||||
default ""
|
||||
config BSP_UART1_TX_PINNAME
|
||||
string "uart1 tx pin name"
|
||||
default ""
|
||||
endif
|
||||
|
||||
config BSP_USING_UART2
|
||||
bool "Enable UART 2"
|
||||
default n
|
||||
|
||||
if BSP_USING_UART2
|
||||
config BSP_UART2_RX_PINNAME
|
||||
string "uart2 rx pin name"
|
||||
default ""
|
||||
config BSP_UART2_TX_PINNAME
|
||||
string "uart2 tx pin name"
|
||||
default ""
|
||||
endif
|
||||
|
||||
config BSP_USING_UART3
|
||||
bool "Enable UART 3"
|
||||
default n
|
||||
|
||||
if BSP_USING_UART3
|
||||
config BSP_UART3_RX_PINNAME
|
||||
string "uart3 rx pin name"
|
||||
default ""
|
||||
config BSP_UART3_TX_PINNAME
|
||||
string "uart3 tx pin name"
|
||||
default ""
|
||||
endif
|
||||
|
||||
config BSP_USING_UART4
|
||||
bool "Enable UART 4"
|
||||
default n
|
||||
|
||||
if BSP_USING_UART4
|
||||
config BSP_UART4_RX_PINNAME
|
||||
string "uart4 rx pin name"
|
||||
default ""
|
||||
config BSP_UART4_TX_PINNAME
|
||||
string "uart4 tx pin name"
|
||||
default ""
|
||||
endif
|
||||
|
||||
config UART_IRQ_BASE
|
||||
int
|
||||
default 44
|
||||
|
||||
config RT_USING_UART1
|
||||
bool "Enable UART 1"
|
||||
default n
|
||||
|
||||
config RT_USING_UART2
|
||||
bool "Enable UART 2"
|
||||
default n
|
||||
|
||||
config RT_USING_UART3
|
||||
bool "Enable UART 3"
|
||||
default n
|
||||
|
||||
config RT_USING_UART4
|
||||
bool "Enable UART 4"
|
||||
default n
|
||||
|
||||
endif
|
||||
|
||||
menuconfig BSP_USING_I2C
|
||||
|
|
|
|||
|
|
@ -9,7 +9,6 @@
|
|||
#define RT_THREAD_PRIORITY_32
|
||||
#define RT_THREAD_PRIORITY_MAX 32
|
||||
#define RT_TICK_PER_SECOND 1000
|
||||
#define RT_USING_OVERFLOW_CHECK
|
||||
#define RT_USING_HOOK
|
||||
#define RT_HOOK_USING_FUNC_PTR
|
||||
#define RT_USING_IDLE_HOOK
|
||||
|
|
@ -31,6 +30,7 @@
|
|||
#define RT_DEBUGING_ASSERT
|
||||
#define RT_DEBUGING_COLOR
|
||||
#define RT_DEBUGING_CONTEXT
|
||||
#define RT_USING_OVERFLOW_CHECK
|
||||
|
||||
/* Inter-Thread communication */
|
||||
|
||||
|
|
@ -135,10 +135,6 @@
|
|||
#define RT_MMCSD_MAX_PARTITION 16
|
||||
#define RT_USING_PIN
|
||||
#define RT_USING_KTIME
|
||||
|
||||
/* Using USB */
|
||||
|
||||
/* end of Using USB */
|
||||
/* end of Device Drivers */
|
||||
|
||||
/* C/C++ and POSIX layer */
|
||||
|
|
@ -252,6 +248,10 @@
|
|||
#define RT_USING_ADT_HASHMAP
|
||||
#define RT_USING_ADT_REF
|
||||
/* end of Utilities */
|
||||
|
||||
/* Using USB legacy version */
|
||||
|
||||
/* end of Using USB legacy version */
|
||||
/* end of RT-Thread Components */
|
||||
|
||||
/* RT-Thread Utestcases */
|
||||
|
|
@ -348,6 +348,10 @@
|
|||
|
||||
/* end of STM32 HAL & SDK Drivers */
|
||||
|
||||
/* Infineon HAL Packages */
|
||||
|
||||
/* end of Infineon HAL Packages */
|
||||
|
||||
/* Kendryte SDK */
|
||||
|
||||
/* end of Kendryte SDK */
|
||||
|
|
@ -434,7 +438,9 @@
|
|||
/* General Drivers Configuration */
|
||||
|
||||
#define BSP_USING_UART
|
||||
#define RT_USING_UART0
|
||||
#define BSP_USING_UART0
|
||||
#define BSP_UART0_RX_PINNAME "UART0_RX"
|
||||
#define BSP_UART0_TX_PINNAME "UART0_TX"
|
||||
#define UART_IRQ_BASE 44
|
||||
/* end of General Drivers Configuration */
|
||||
#define BSP_USING_CV18XX
|
||||
|
|
|
|||
|
|
@ -13,6 +13,7 @@
|
|||
|
||||
#include "board.h"
|
||||
#include "drv_uart.h"
|
||||
#include "drv_pinmux.h"
|
||||
|
||||
#define DBG_TAG "DRV.UART"
|
||||
#define DBG_LVL DBG_WARNING
|
||||
|
|
@ -50,19 +51,19 @@ static struct hw_uart_device _uart##no##_device = \
|
|||
}; \
|
||||
static struct rt_serial_device _serial##no;
|
||||
|
||||
#ifdef RT_USING_UART0
|
||||
#ifdef BSP_USING_UART0
|
||||
BSP_DEFINE_UART_DEVICE(0);
|
||||
#endif
|
||||
|
||||
#ifdef RT_USING_UART1
|
||||
#ifdef BSP_USING_UART1
|
||||
BSP_DEFINE_UART_DEVICE(1);
|
||||
#endif
|
||||
|
||||
#ifdef RT_USING_UART2
|
||||
#ifdef BSP_USING_UART2
|
||||
BSP_DEFINE_UART_DEVICE(2);
|
||||
#endif
|
||||
|
||||
#ifdef RT_USING_UART3
|
||||
#ifdef BSP_USING_UART3
|
||||
BSP_DEFINE_UART_DEVICE(3);
|
||||
#endif
|
||||
|
||||
|
|
@ -234,6 +235,132 @@ static void rt_hw_uart_isr(int irqno, void *param)
|
|||
}
|
||||
}
|
||||
|
||||
#if defined(BOARD_TYPE_MILKV_DUO) || defined(BOARD_TYPE_MILKV_DUO_SPINOR)
|
||||
|
||||
#ifdef BSP_USING_UART0
|
||||
static const char *pinname_whitelist_uart0_rx[] = {
|
||||
"UART0_RX",
|
||||
NULL,
|
||||
};
|
||||
static const char *pinname_whitelist_uart0_tx[] = {
|
||||
"UART0_TX",
|
||||
NULL,
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef BSP_USING_UART1
|
||||
static const char *pinname_whitelist_uart1_rx[] = {
|
||||
"IIC0_SDA",
|
||||
"UART0_RX",
|
||||
NULL,
|
||||
};
|
||||
static const char *pinname_whitelist_uart1_tx[] = {
|
||||
"IIC0_SCL",
|
||||
"UART0_TX",
|
||||
NULL,
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef BSP_USING_UART2
|
||||
static const char *pinname_whitelist_uart2_rx[] = {
|
||||
"IIC0_SDA",
|
||||
"SD1_D1",
|
||||
NULL,
|
||||
};
|
||||
static const char *pinname_whitelist_uart2_tx[] = {
|
||||
"IIC0_SCL",
|
||||
"SD1_D2",
|
||||
NULL,
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef BSP_USING_UART3
|
||||
static const char *pinname_whitelist_uart3_rx[] = {
|
||||
"SD1_D1",
|
||||
NULL,
|
||||
};
|
||||
static const char *pinname_whitelist_uart3_tx[] = {
|
||||
"SD1_D2",
|
||||
NULL,
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef BSP_USING_UART4
|
||||
static const char *pinname_whitelist_uart4_rx[] = {
|
||||
"SD1_GPIO0",
|
||||
NULL,
|
||||
};
|
||||
static const char *pinname_whitelist_uart4_tx[] = {
|
||||
"SD1_GPIO1",
|
||||
NULL,
|
||||
};
|
||||
#endif
|
||||
|
||||
#elif defined(BOARD_TYPE_MILKV_DUO256M) || defined(BOARD_TYPE_MILKV_DUO256M_SPINOR)
|
||||
|
||||
#ifdef BSP_USING_UART0
|
||||
static const char *pinname_whitelist_uart0_rx[] = {
|
||||
"UART0_RX",
|
||||
NULL,
|
||||
};
|
||||
static const char *pinname_whitelist_uart0_tx[] = {
|
||||
"UART0_TX",
|
||||
NULL,
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef BSP_USING_UART1
|
||||
static const char *pinname_whitelist_uart1_rx[] = {
|
||||
"IIC0_SDA",
|
||||
"JTAG_CPU_TCK",
|
||||
"UART0_RX",
|
||||
NULL,
|
||||
};
|
||||
static const char *pinname_whitelist_uart1_tx[] = {
|
||||
"IIC0_SCL",
|
||||
"JTAG_CPU_TMS",
|
||||
"UART0_TX",
|
||||
NULL,
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef BSP_USING_UART2
|
||||
static const char *pinname_whitelist_uart2_rx[] = {
|
||||
"IIC0_SDA",
|
||||
"SD1_D1",
|
||||
NULL,
|
||||
};
|
||||
static const char *pinname_whitelist_uart2_tx[] = {
|
||||
"IIC0_SCL",
|
||||
"SD1_D2",
|
||||
NULL,
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef BSP_USING_UART3
|
||||
static const char *pinname_whitelist_uart3_rx[] = {
|
||||
"SD1_D1",
|
||||
NULL,
|
||||
};
|
||||
static const char *pinname_whitelist_uart3_tx[] = {
|
||||
"SD1_D2",
|
||||
NULL,
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef BSP_USING_UART4
|
||||
static const char *pinname_whitelist_uart4_rx[] = {
|
||||
NULL,
|
||||
};
|
||||
static const char *pinname_whitelist_uart4_tx[] = {
|
||||
NULL,
|
||||
};
|
||||
#endif
|
||||
|
||||
#else
|
||||
#error "Unsupported board type!"
|
||||
#endif
|
||||
|
||||
int rt_hw_uart_init(void)
|
||||
{
|
||||
struct hw_uart_device* uart;
|
||||
|
|
@ -248,45 +375,45 @@ int rt_hw_uart_init(void)
|
|||
rt_hw_serial_register(&_serial##no, "uart" #no, RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX, uart); \
|
||||
rt_hw_interrupt_install(uart->irqno, rt_hw_uart_isr, &_serial##no, "uart" #no);
|
||||
|
||||
#ifdef RT_USING_UART0
|
||||
PINMUX_CONFIG(UART0_RX, UART0_RX);
|
||||
PINMUX_CONFIG(UART0_TX, UART0_TX);
|
||||
#ifdef BSP_USING_UART0
|
||||
pinmux_config(BSP_UART0_RX_PINNAME, UART0_RX, pinname_whitelist_uart0_rx);
|
||||
pinmux_config(BSP_UART0_TX_PINNAME, UART0_TX, pinname_whitelist_uart0_tx);
|
||||
BSP_INSTALL_UART_DEVICE(0);
|
||||
#if defined(ARCH_ARM)
|
||||
uart->hw_base = (rt_size_t)rt_ioremap((void*)uart->hw_base, 0x10000);
|
||||
#endif /* defined(ARCH_ARM) */
|
||||
#endif
|
||||
|
||||
#ifdef RT_USING_UART1
|
||||
PINMUX_CONFIG(IIC0_SDA, UART1_RX);
|
||||
PINMUX_CONFIG(IIC0_SCL, UART1_TX);
|
||||
#ifdef BSP_USING_UART1
|
||||
pinmux_config(BSP_UART1_RX_PINNAME, UART1_RX, pinname_whitelist_uart1_rx);
|
||||
pinmux_config(BSP_UART1_TX_PINNAME, UART1_TX, pinname_whitelist_uart1_tx);
|
||||
BSP_INSTALL_UART_DEVICE(1);
|
||||
#if defined(ARCH_ARM)
|
||||
uart->hw_base = (rt_size_t)rt_ioremap((void*)uart->hw_base, 0x10000);
|
||||
#endif /* defined(ARCH_ARM) */
|
||||
#endif
|
||||
|
||||
#ifdef RT_USING_UART2
|
||||
PINMUX_CONFIG(SD1_D1, UART2_RX);
|
||||
PINMUX_CONFIG(SD1_D2, UART2_TX);
|
||||
#ifdef BSP_USING_UART2
|
||||
pinmux_config(BSP_UART2_RX_PINNAME, UART2_RX, pinname_whitelist_uart2_rx);
|
||||
pinmux_config(BSP_UART2_TX_PINNAME, UART2_TX, pinname_whitelist_uart2_tx);
|
||||
BSP_INSTALL_UART_DEVICE(2);
|
||||
#if defined(ARCH_ARM)
|
||||
uart->hw_base = (rt_size_t)rt_ioremap((void*)uart->hw_base, 0x10000);
|
||||
#endif /* defined(ARCH_ARM) */
|
||||
#endif
|
||||
|
||||
#ifdef RT_USING_UART3
|
||||
PINMUX_CONFIG(SD1_D1, UART3_RX);
|
||||
PINMUX_CONFIG(SD1_D2, UART3_TX);
|
||||
#ifdef BSP_USING_UART3
|
||||
pinmux_config(BSP_UART3_RX_PINNAME, UART3_RX, pinname_whitelist_uart3_rx);
|
||||
pinmux_config(BSP_UART3_TX_PINNAME, UART3_TX, pinname_whitelist_uart3_tx);
|
||||
BSP_INSTALL_UART_DEVICE(3);
|
||||
#if defined(ARCH_ARM)
|
||||
uart->hw_base = (rt_size_t)rt_ioremap((void*)uart->hw_base, 0x10000);
|
||||
#endif /* defined(ARCH_ARM) */
|
||||
#endif
|
||||
|
||||
#ifdef RT_USING_UART4
|
||||
PINMUX_CONFIG(SD1_GP0, UART4_RX);
|
||||
PINMUX_CONFIG(SD1_GP1, UART4_TX);
|
||||
#ifdef BSP_USING_UART4
|
||||
pinmux_config(BSP_UART4_RX_PINNAME, UART4_RX, pinname_whitelist_uart4_rx);
|
||||
pinmux_config(BSP_UART4_TX_PINNAME, UART4_TX, pinname_whitelist_uart4_tx);
|
||||
BSP_INSTALL_UART_DEVICE(4);
|
||||
#if defined(ARCH_ARM)
|
||||
uart->hw_base = (rt_size_t)rt_ioremap((void*)uart->hw_base, 0x10000);
|
||||
|
|
|
|||
Loading…
Reference in New Issue