nuclei: update kconfig

Signed-off-by: Huaqi Fang <578567190@qq.com>

bsp/nuclei/gd32vf103/.config

@@ -435,12 +435,16 @@ CONFIG_SOC_GD32VF103V=y
 #
 # Onboard Peripheral Drivers
 #
-CONFIG_BSP_USING_USART=y
+CONFIG_BSP_USING_UART_CONSOLE=y
 
 #
 # On-chip Peripheral Drivers
 #
 CONFIG_BSP_USING_UART=y
+# CONFIG_BSP_USING_UART0 is not set
+# CONFIG_BSP_USING_UART1 is not set
+# CONFIG_BSP_USING_UART2 is not set
+# CONFIG_BSP_USING_UART3 is not set
 CONFIG_BSP_USING_UART4=y
 
 #

bsp/nuclei/gd32vf103/board/Kconfig

@@ -7,8 +7,8 @@ config SOC_GD32VF103V
 
 menu "Onboard Peripheral Drivers"
 
-    config BSP_USING_USART
-        bool "Enable USART (uart4)"
+    config BSP_USING_UART_CONSOLE
+        bool "Enable UART CONSOLE"
         select BSP_USING_UART
         select BSP_USING_UART4
         default y
@@ -21,9 +21,21 @@ menu "On-chip Peripheral Drivers"
         default y
         select RT_USING_SERIAL
         if BSP_USING_UART
+            config BSP_USING_UART0
+                bool "Enable UART0"
+                default n
+            config BSP_USING_UART1
+                bool "Enable UART1"
+                default n
+            config BSP_USING_UART2
+                bool "Enable UART2"
+                default n
+            config BSP_USING_UART3
+                bool "Enable UART3"
+                default n
             config BSP_USING_UART4
                 bool "Enable UART4"
-                default y
+                default n
         endif
 endmenu
 

bsp/nuclei/gd32vf103/drivers/drv_usart.c

@@ -14,14 +14,23 @@
 #ifdef RT_USING_SERIAL
 
 #if !defined(BSP_USING_UART0) && !defined(BSP_USING_UART1) && !defined(BSP_USING_UART2) \
-    && !defined(BSP_USING_UART3) && !defined(BSP_USING_UART4) && !defined(BSP_USING_UART5)
+    && !defined(BSP_USING_UART3) && !defined(BSP_USING_UART4)
     #error "Please define at least one BSP_USING_UARTx"
     /* this driver can be disabled at menuconfig -> RT-Thread Components -> Device Drivers */
 #endif
 
 enum {
 #ifdef BSP_USING_UART0
-    GDUSART0_INDEX,
+    GDUART0_INDEX,
+#endif
+#ifdef BSP_USING_UART1
+    GDUART1_INDEX,
+#endif
+#ifdef BSP_USING_UART2
+    GDUART2_INDEX,
+#endif
+#ifdef BSP_USING_UART3
+    GDUART3_INDEX,
 #endif
 #ifdef BSP_USING_UART4
     GDUART4_INDEX,
@@ -34,6 +43,21 @@ static struct gd32_uart_config uart_config[] = {
         USART0,
         USART0_IRQn, },
 #endif
+#ifdef BSP_USING_UART1
+        { "uart1",
+        USART1,
+        USART1_IRQn, },
+#endif
+#ifdef BSP_USING_UART2
+        { "uart2",
+        USART2,
+        USART2_IRQn, },
+#endif
+#ifdef BSP_USING_UART3
+        { "uart3",
+        USART3,
+        USART3_IRQn, },
+#endif
 #ifdef BSP_USING_UART4
         { "uart4",
         UART4,
@@ -202,7 +226,43 @@ static void usart_isr(struct rt_serial_device *serial) {
 void USART0_IRQHandler(void) {
     rt_interrupt_enter();
 
-    usart_isr(&uart_obj[GDUSART0_INDEX].serial);
+    usart_isr(&uart_obj[GDUART0_INDEX].serial);
+
+    rt_interrupt_leave();
+}
+
+#endif
+
+#ifdef BSP_USING_UART1
+
+void USART1_IRQHandler(void) {
+    rt_interrupt_enter();
+
+    usart_isr(&uart_obj[GDUART1_INDEX].serial);
+
+    rt_interrupt_leave();
+}
+
+#endif
+
+#ifdef BSP_USING_UART2
+
+void USART2_IRQHandler(void) {
+    rt_interrupt_enter();
+
+    usart_isr(&uart_obj[GDUART2_INDEX].serial);
+
+    rt_interrupt_leave();
+}
+
+#endif
+
+#ifdef BSP_USING_UART3
+
+void UART3_IRQHandler(void) {
+    rt_interrupt_enter();
+
+    usart_isr(&uart_obj[GDUART3_INDEX].serial);
 
     rt_interrupt_leave();
 }

bsp/nuclei/gd32vf103/rtconfig.h

@@ -167,7 +167,7 @@
 
 /* Onboard Peripheral Drivers */
 
-#define BSP_USING_USART
+#define BSP_USING_UART_CONSOLE
 
 /* On-chip Peripheral Drivers */