libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity

[errno code][-RT_ERROR] fix that use RT_ERROR without -

This commit is contained in:
Meco Man 2023-03-17 00:12:16 -04:00 committed by Man, Jianting (Meco)
parent de963feef4
commit 0f461e870c
272 changed files with 639 additions and 644 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
bsp/Infineon/libraries/HAL_Drivers/drv_hwtimer.c
View File

@ -198,7 +198,7 @@ static rt_err_t timer_ctrl(rt_hwtimer_t *timer, rt_uint32_t cmd, void *arg)
if (result != CY_RSLT_SUCCESS)
{
LOG_E("cyhal_timer_set_frequency error\r\n");
return RT_ERROR;
return -RT_ERROR;
}
}
break;
@ -301,7 +301,7 @@ int hwtimer_sample()
if (hw_dev == RT_NULL)
{
rt_kprintf("hwtimer sample run failed! can't find %s device!\n", HWTIMER_DEV_NAME);
return RT_ERROR;
return -RT_ERROR;
}
ret = rt_device_open(hw_dev, RT_DEVICE_OFLAG_RDWR);
@ -329,7 +329,7 @@ int hwtimer_sample()
if (rt_device_write(hw_dev, 0, &timeout_s, sizeof(timeout_s)) != sizeof(timeout_s))
{
rt_kprintf("set timeout value failed\n");
return RT_ERROR;
return -RT_ERROR;
}
while (1)

2
bsp/Infineon/libraries/HAL_Drivers/drv_pwm.c
View File

@ -243,7 +243,7 @@ static int pwm_sample(int argc, char *argv[])
if (pwm_dev == RT_NULL)
{
rt_kprintf("pwm sample run failed! can't find %s device!\n", PWM_DEV_NAME);
return RT_ERROR;
return -RT_ERROR;
}
rt_pwm_set(pwm_dev, PWM_DEV_CHANNEL, period, pulse);

2
bsp/Infineon/libraries/HAL_Drivers/drv_rtc.c
View File

@ -153,7 +153,7 @@ static int rt_hw_rtc_init(void)
if (rt_hw_rtc_register(&ifx32_rtc_dev, "rtc", RT_DEVICE_FLAG_RDWR, RT_NULL) != RT_EOK)
{
LOG_E("rtc init failed");
result = RT_ERROR;
result = -RT_ERROR;
}
else
{

2
bsp/Infineon/libraries/HAL_Drivers/drv_spi.c
View File

@ -60,7 +60,7 @@ static void ifx_spi_init(struct ifx_spi *ifx_spi)
result = cyhal_spi_init(ifx_spi->spi_obj, ifx_spi->mosi_pin, ifx_spi->miso_pin, ifx_spi->sck_pin,
NC, NULL, ifx_spi->spi_obj->data_bits, ifx_spi->spi_obj->mode, false);
RT_ASSERT(result != RT_ERROR);
RT_ASSERT(result == RT_EOK);
rt_kprintf("[%s] Freq:[%d]HZ\n", ifx_spi->bus_name, ifx_spi->freq);

2
bsp/Infineon/libraries/HAL_Drivers/drv_uart.c
View File

@ -182,7 +182,7 @@ static rt_err_t ifx_configure(struct rt_serial_device *serial, struct serial_con
result = cyhal_uart_set_baud(uart->config->uart_obj, cfg->baud_rate, NULL);
}
RT_ASSERT(result != RT_ERROR);
RT_ASSERT(result == RT_EOK);
return RT_EOK;
}

2
bsp/Infineon/libraries/HAL_Drivers/drv_wdt.c
View File

@ -60,7 +60,7 @@ static rt_err_t wdt_control(rt_watchdog_t *wdt_device, int cmd, void *arg)
/* Initialize the WDT */
int result = cyhal_wdt_init(cfg->WDTx, (rt_uint32_t)timeout_ms);
/* WDT initialization failed. Stop program execution */
RT_ASSERT(result != RT_ERROR);
RT_ASSERT(result == RT_EOK);
}
break;

2
bsp/Infineon/libraries/templates/PSOC62/board/ports/slider_sample.c
View File

@ -234,7 +234,7 @@ int Slider_ctrl_sample(void)
}
else
{
ret = RT_ERROR;
ret = -RT_ERROR;
}
return ret;

2
bsp/Infineon/libraries/templates/PSOC62/board/ports/spi_sample.c
View File

@ -32,7 +32,7 @@ static int rt_spi_device_init(void)
if (RT_NULL == spi_dev)
{
rt_kprintf("spi sample run failed! can't find %s device!\n", SPI_NAME);
return RT_ERROR;
return -RT_ERROR;
}
rt_spi_configure(spi_dev, &cfg);

2
bsp/Infineon/psoc6-cy8ckit-062-BLE/board/ports/slider_sample.c
View File

@ -234,7 +234,7 @@ int Slider_ctrl_sample(void)
}
else
{
ret = RT_ERROR;
ret = -RT_ERROR;
}
return ret;

2
bsp/Infineon/psoc6-cy8ckit-062-BLE/board/ports/spi_sample.c
View File

@ -32,7 +32,7 @@ static int rt_spi_device_init(void)
if (RT_NULL == spi_dev)
{
rt_kprintf("spi sample run failed! can't find %s device!\n", SPI_NAME);
return RT_ERROR;
return -RT_ERROR;
}
rt_spi_configure(spi_dev, &cfg);

2
bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/board/ports/slider_sample.c
View File

@ -234,7 +234,7 @@ int Slider_ctrl_sample(void)
}
else
{
ret = RT_ERROR;
ret = -RT_ERROR;
}
return ret;

2
bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/board/ports/spi_sample.c
View File

@ -32,7 +32,7 @@ static int rt_spi_device_init(void)
if (RT_NULL == spi_dev)
{
rt_kprintf("spi sample run failed! can't find %s device!\n", SPI_NAME);
return RT_ERROR;
return -RT_ERROR;
}
rt_spi_configure(spi_dev, &cfg);

2
bsp/Infineon/psoc6-cy8ckit-062S2-43012/board/ports/slider_sample.c
View File

@ -235,7 +235,7 @@ int Slider_ctrl_sample(void)
}
else
{
ret = RT_ERROR;
ret = -RT_ERROR;
}
return ret;

2
bsp/Infineon/psoc6-cy8ckit-062S2-43012/board/ports/spi_sample.c
View File

@ -32,7 +32,7 @@ static int rt_spi_device_init(void)
if (RT_NULL == spi_dev)
{
rt_kprintf("spi sample run failed! can't find %s device!\n", SPI_NAME);
return RT_ERROR;
return -RT_ERROR;
}
rt_spi_configure(spi_dev, &cfg);

2
bsp/Infineon/psoc6-cy8ckit-062s4/board/ports/slider_sample.c
View File

@ -234,7 +234,7 @@ int Slider_ctrl_sample(void)
}
else
{
ret = RT_ERROR;
ret = -RT_ERROR;
}
return ret;

2
bsp/Infineon/psoc6-cy8ckit-062s4/board/ports/spi_sample.c
View File

@ -32,7 +32,7 @@ static int rt_spi_device_init(void)
if (RT_NULL == spi_dev)
{
rt_kprintf("spi sample run failed! can't find %s device!\n", SPI_NAME);
return RT_ERROR;
return -RT_ERROR;
}
rt_spi_configure(spi_dev, &cfg);

2
bsp/Infineon/psoc6-cy8cproto-062S3-4343W/board/ports/slider_sample.c
View File

@ -235,7 +235,7 @@ int Slider_ctrl_sample(void)
}
else
{
ret = RT_ERROR;
ret = -RT_ERROR;
}
return ret;

2
bsp/Infineon/psoc6-cy8cproto-062S3-4343W/board/ports/spi_sample.c
View File

@ -32,7 +32,7 @@ static int rt_spi_device_init(void)
if (RT_NULL == spi_dev)
{
rt_kprintf("spi sample run failed! can't find %s device!\n", SPI_NAME);
return RT_ERROR;
return -RT_ERROR;
}
rt_spi_configure(spi_dev, &cfg);

2
bsp/Infineon/psoc6-evaluationkit-062S2/board/ports/slider_sample.c
View File

@ -235,7 +235,7 @@ int Slider_ctrl_sample(void)
}
else
{
ret = RT_ERROR;
ret = -RT_ERROR;
}
return ret;

2
bsp/Infineon/psoc6-evaluationkit-062S2/board/ports/spi_sample.c
View File

@ -32,7 +32,7 @@ static int rt_spi_device_init(void)
if (RT_NULL == spi_dev)
{
rt_kprintf("spi sample run failed! can't find %s device!\n", SPI_NAME);
return RT_ERROR;
return -RT_ERROR;
}
rt_spi_configure(spi_dev, &cfg);

4
bsp/airm2m/air105/board/wdt_feed.c
View File

@ -30,14 +30,14 @@ static int wdt_feed_init(void)
if (!wdg_dev)
{
rt_kprintf("find %s failed!\n", device_name);
return RT_ERROR;
return -RT_ERROR;
}
ret = rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_SET_TIMEOUT, &timeout);
if (ret != RT_EOK)
{
rt_kprintf("set %s timeout failed!\n", device_name);
return RT_ERROR;
return -RT_ERROR;
}
ret = rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_START, RT_NULL);
if (ret != RT_EOK)

2
bsp/airm2m/air105/libraries/rt_drivers/drv_i2c.c
View File

@ -85,7 +85,7 @@ static rt_ssize_t air105_i2c_slv_xfer(struct rt_i2c_bus_device *bus,
struct rt_i2c_msg msgs[],
rt_uint32_t num)
{
return RT_ERROR;
return -RT_ENOSYS;
}
static rt_err_t air105_i2c_bus_control(struct rt_i2c_bus_device *bus,
rt_uint32_t cmd,

2
bsp/airm2m/air105/libraries/rt_drivers/drv_usart_v2.c
View File

@ -232,7 +232,7 @@ static rt_err_t air105_control(struct rt_serial_device *serial, int cmd, void *a
}
break;
default:
return RT_ERROR;
return -RT_EINVAL;
}
return RT_EOK;

14
bsp/allwinner/libraries/drivers/drv_pin.c
View File

@ -51,7 +51,7 @@ static rt_err_t hal_pin_attach_irq(struct rt_device *device, rt_int32_t pin,
if (ret < 0)
{
rt_kprintf("gpio to irq error, irq num:%lu error num: %d", irq, ret);
return RT_ERROR;
return -RT_ERROR;
}
level = rt_hw_interrupt_disable();
@ -61,7 +61,7 @@ static rt_err_t hal_pin_attach_irq(struct rt_device *device, rt_int32_t pin,
{
rt_hw_interrupt_enable(level);
rt_kprintf("request irq error, irq num:%lu error num: %d", irq, ret);
return RT_ERROR;
return -RT_ERROR;
}
rt_hw_interrupt_enable(level);
@ -78,7 +78,7 @@ static rt_err_t hal_pin_detach_irq(struct rt_device *device, rt_int32_t pin)
if (ret < 0)
{
rt_kprintf("gpio to irq error, irq num:%lu error num: %d", irq, ret);
return RT_ERROR;
return -RT_ERROR;
}
level = rt_hw_interrupt_disable();
@ -87,7 +87,7 @@ static rt_err_t hal_pin_detach_irq(struct rt_device *device, rt_int32_t pin)
{
rt_hw_interrupt_enable(level);
rt_kprintf("free irq error, error num: %d", ret);
return RT_ERROR;
return -RT_ERROR;
}
return RT_EOK;
}
@ -101,7 +101,7 @@ static rt_err_t hal_pin_irq_enable(struct rt_device *device, rt_base_t pin, rt_u
if (ret < 0)
{
rt_kprintf("gpio to irq error, irq num:%lu error num: %d", irq, ret);
return RT_ERROR;
return -RT_ERROR;
}
if (enabled == PIN_IRQ_ENABLE)
@ -110,7 +110,7 @@ static rt_err_t hal_pin_irq_enable(struct rt_device *device, rt_base_t pin, rt_u
if (ret < 0)
{
rt_kprintf("request irq error, error num: %d", ret);
return RT_ERROR;
return -RT_ERROR;
}
}
else
@ -119,7 +119,7 @@ static rt_err_t hal_pin_irq_enable(struct rt_device *device, rt_base_t pin, rt_u
if (ret < 0)
{
rt_kprintf("disable irq error, irq num:%lu, error num: %d", irq, ret);
return RT_ERROR;
return -RT_ERROR;
}
}

10
bsp/allwinner/libraries/sunxi-hal/hal/source/gmac/hal_geth.c
View File

@ -262,7 +262,7 @@ int is_enough_desc_available(struct dma_desc *entry)
if(desc->desc0.tx.own != 0)
{
printf("desc %08x desc0 %08x desc1 %08x\n",desc,desc->desc0,desc->desc1);
return RT_ERROR;
return -RT_ERROR;
}
return RT_EOK;
@ -284,7 +284,7 @@ int wait_tx_completed(struct dma_desc *entry)
if(timeout_cnt > 1000)
{
printf("emac send data timeout \n");
return RT_ERROR;
return -RT_ERROR;
}
}
desc_tag_clean(desc);
@ -307,13 +307,13 @@ static rt_err_t rt_geth_xmit(rt_device_t dev, struct pbuf *p)
unsigned int i = 0;
unsigned int copy_offset = 0;
if (!rt_geth_dev.phy_link_status) return RT_ERROR;
if (!rt_geth_dev.phy_link_status) return -RT_ERROR;
first = rt_geth_dev.get_buffer_config.dma_desc_tx + tx_dirty;
ret = is_enough_desc_available(first);
if(ret < 0)
{
return RT_ERROR;
return -RT_ERROR;
}
copy_offset = 0;
@ -326,7 +326,7 @@ static rt_err_t rt_geth_xmit(rt_device_t dev, struct pbuf *p)
if(copy_offset >= ((1 << 11) - 1))
{
printf("send data exceed max len copy_offset %d\n",copy_offset);
return RT_ERROR;
return -RT_ERROR;
}
}

20
bsp/allwinner_tina/drivers/drv_clock.c
View File

@ -230,7 +230,7 @@ rt_err_t cpu_set_pll_clk(int clk)
//PLL1 rate = ((24000000 * n * k) >> 0) / m (p is ignored)
CCU->pll_cpu_ctrl = (0x1 << 31) | (m << 0) | (k << 4) | (n << 8) | (p << 16);
if (wait_pll_stable((rt_uint32_t)(&CCU->pll_cpu_ctrl)))
return RT_ERROR;
return -RT_ERROR;
CCU->cpu_clk_src = cpu_src << 16;
@ -267,7 +267,7 @@ rt_err_t audio_set_pll_clk(int clk)
n = clk / n_temp;
m = _24MHZ_ * 2 / m_temp;
if ((n > 128) || (m > 32) || (clk != (_24MHZ_ * n * 2) / m))
return RT_ERROR;
return -RT_ERROR;
CCU->pll_audio_ctrl &= ~(0x1 << 31);
n = (n - 1) & 0x7f;
@ -276,7 +276,7 @@ rt_err_t audio_set_pll_clk(int clk)
CCU->pll_audio_ctrl = (0x1 << 31) | (0x0 << 24) | (n << 8) | m;
if (wait_pll_stable((rt_uint32_t)(&CCU->pll_audio_ctrl)))
return RT_ERROR;
return -RT_ERROR;
else
return RT_EOK;
}
@ -312,7 +312,7 @@ rt_err_t video_set_pll_clk(int clk)
m = _24MHZ_ / m_temp;
if ((n > 128) || (m > 16) || (clk != (_24MHZ_ * n) / m))
return RT_ERROR;
return -RT_ERROR;
CCU->pll_video_ctrl &= ~(0x1 << 31);
n = (n - 1) & 0x7f;
@ -321,7 +321,7 @@ rt_err_t video_set_pll_clk(int clk)
CCU->pll_video_ctrl = (0x1 << 31) | (0x0 << 30) | (0x1 << 24) | (n << 8) | m;
if (wait_pll_stable((rt_uint32_t)(&CCU->pll_video_ctrl)))
return RT_ERROR;
return -RT_ERROR;
else
return RT_EOK;
}
@ -357,7 +357,7 @@ rt_err_t ve_set_pll_clk(int clk)
m = _24MHZ_ / m_temp;
if ((n > 128) || (m > 16) || (clk != (_24MHZ_ * n) / m))
return RT_ERROR;
return -RT_ERROR;
CCU->pll_ve_ctrl &= ~(0x1 << 31);
n = (n - 1) & 0x7f;
@ -365,7 +365,7 @@ rt_err_t ve_set_pll_clk(int clk)
//clk = (24 * n) / m
CCU->pll_ve_ctrl = (0x1 << 31) | (0x1 << 24) | (n << 8) | m;
if (wait_pll_stable((rt_uint32_t)(&CCU->pll_ve_ctrl)))
return RT_ERROR;
return -RT_ERROR;
else
return RT_EOK;
}
@ -388,7 +388,7 @@ rt_err_t periph_set_pll_clk(int clk)
}
if ((n > 32) || (k > 4) || (clk != (_24MHZ_ * n * k)))
return RT_ERROR;
return -RT_ERROR;
temp_data = CCU->ahb_apb_hclkc_cfg;
clk_src = (temp_data >> 12) & 0x3;
temp_data &= ~(0x3 << 12);
@ -400,7 +400,7 @@ rt_err_t periph_set_pll_clk(int clk)
//clk = 24 * n *k
CCU->pll_periph_ctrl = (0x1 << 31) | (0x1 << 18) | (n << 8) | (k << 4) || (0x1);
if (wait_pll_stable((rt_uint32_t)(&CCU->pll_periph_ctrl)))
return RT_ERROR;
return -RT_ERROR;
temp_data = CCU->ahb_apb_hclkc_cfg;
temp_data &= ~(0x3 << 12);
@ -423,7 +423,7 @@ rt_err_t cpu_set_clk(int clk)
return RT_EOK;
if (cpu_set_pll_clk(clk))
return RT_ERROR;
return -RT_ERROR;
CCU->ahb_apb_hclkc_cfg &= ~(0x3 << 16);
CCU->cpu_clk_src = CLK_PLL_SRC << 16;

6
bsp/allwinner_tina/drivers/drv_gpio.c
View File

@ -469,7 +469,7 @@ static rt_err_t pin_attach_irq(struct rt_device *device, rt_int32_t pin, rt_uint
if ((pin > PIN_NUM(pin_index)) || (pin_index[pin].magic != PIN_MAGIC))
{
LOG_E("pin:%d value wrongful", pin);
return RT_ERROR;
return -RT_ERROR;
}
gpio_set_irq_callback(pin_index[pin].pin_port, pin_index[pin].pin, hdr, args);
@ -481,7 +481,7 @@ static rt_err_t pin_detach_irq(struct rt_device *device, rt_int32_t pin)
if ((pin > PIN_NUM(pin_index)) || (pin_index[pin].magic != PIN_MAGIC))
{
LOG_E("pin:%d value wrongful", pin);
return RT_ERROR;
return -RT_ERROR;
}
gpio_clear_irq_callback(pin_index[pin].pin_port, pin_index[pin].pin);
@ -494,7 +494,7 @@ rt_err_t pin_irq_enable(struct rt_device *device, rt_base_t pin, rt_uint32_t ena
if ((pin > PIN_NUM(pin_index)) || (pin_index[pin].magic != PIN_MAGIC))
{
LOG_E("pin:%d value wrongful", pin);
return RT_ERROR;
return -RT_ERROR;
}
if (enabled)

2
bsp/allwinner_tina/drivers/drv_sdio.c
View File

@ -774,7 +774,7 @@ err:
rt_free(host);
}
return RT_ERROR;
return -RT_ERROR;
}
INIT_APP_EXPORT(tina_sdio_init);
#endif

2
bsp/allwinner_tina/drivers/spi/drv_spi.c
View File

@ -680,7 +680,7 @@ rt_err_t tina_spi_bus_register(SPI_T *spi, const char *spi_bus_name)
LOG_D("%s -> %d", __FUNCTION__, __LINE__);
return RT_ERROR;
return -RT_ERROR;
}
int rt_hw_spi_init(void)

14
bsp/allwinner_tina/drivers/spi/drv_spi_flash.c
View File

@ -27,12 +27,9 @@
#define DEBUG_PRINTF(...)
#endif
#ifdef TINA_USING_SPI_FLASH
#if defined(TINA_USING_SPI_FLASH) && defined(RT_USING_SFUD)
#include "spi_flash.h"
#if defined(RT_USING_SFUD)
#include "spi_flash_sfud.h"
#include <spi_flash_sfud.h>
rt_spi_flash_device_t spi_device;
int rt_hw_spi_flash_with_sfud_init(void)
{
@ -41,14 +38,11 @@ int rt_hw_spi_flash_with_sfud_init(void)
if (spi_device == NULL)
{
DEBUG_PRINTF("%s -> %d\n", __FUNCTION__, __LINE__);
return RT_ERROR;
return -RT_ERROR;
};
DEBUG_PRINTF("%s -> %d\n", __FUNCTION__, __LINE__);
return RT_EOK;
}
INIT_PREV_EXPORT(rt_hw_spi_flash_with_sfud_init);
#endif
#endif
#endif /* defined(TINA_USING_SPI_FLASH) && defined(RT_USING_SFUD) */

2
bsp/apm32/libraries/Drivers/drv_rtc.c
View File

@ -301,7 +301,7 @@ static int rt_hw_rtc_init(void)
if (rt_hw_rtc_register(&apm32_rtc_dev, "rtc", RT_DEVICE_FLAG_RDWR, RT_NULL) != RT_EOK)
{
LOG_E("rtc init failed");
result = RT_ERROR;
result = -RT_ERROR;
}
else
{

14
bsp/at32/at32f425-start/applications/main.c
View File

@ -93,7 +93,7 @@ static int uart_sample(int argc, char *argv[])
if (!serial)
{
rt_kprintf("find %s failed!\n", uart_name);
return RT_ERROR;
return -RT_ERROR;
}
rt_sem_init(&rx_sem, "rx_sem", 0, RT_IPC_FLAG_FIFO);
@ -110,7 +110,7 @@ static int uart_sample(int argc, char *argv[])
}
else
{
ret = RT_ERROR;
ret = -RT_ERROR;
}
return ret;
@ -253,14 +253,14 @@ static int wdt_sample(int argc, char *argv[])
if (!wdt_dev)
{
rt_kprintf("find %s failed!\n", device_name);
return RT_ERROR;
return -RT_ERROR;
}
ret = rt_device_control(wdt_dev, RT_DEVICE_CTRL_WDT_SET_TIMEOUT, &timeout);
if (ret != RT_EOK)
{
rt_kprintf("set %s timeout failed!\n", device_name);
return RT_ERROR;
return -RT_ERROR;
}
ret = rt_device_control(wdt_dev, RT_DEVICE_CTRL_WDT_START, RT_NULL);
@ -351,7 +351,7 @@ int can_sample(int argc, char *argv[])
if (!can_dev)
{
rt_kprintf("find %s failed!\n", can_name);
return RT_ERROR;
return -RT_ERROR;
}
rt_sem_init(&rx_sem, "rx_sem", 0, RT_IPC_FLAG_FIFO);
@ -500,7 +500,7 @@ static int hwtimer_sample(int argc, char *argv[])
if (hw_dev == RT_NULL)
{
rt_kprintf("hwtimer sample run failed! can't find %s device!\n", HWTIMER_DEV_NAME);
return RT_ERROR;
return -RT_ERROR;
}
ret = rt_device_open(hw_dev, RT_DEVICE_OFLAG_RDWR);
@ -526,7 +526,7 @@ static int hwtimer_sample(int argc, char *argv[])
if (rt_device_write(hw_dev, 0, &timeout_s, sizeof(timeout_s)) != sizeof(timeout_s))
{
rt_kprintf("set timeout value failed\n");
return RT_ERROR;
return -RT_ERROR;
}
rt_thread_mdelay(1000);

2
bsp/at32/libraries/rt_drivers/drv_emac.c
View File

@ -455,7 +455,7 @@ static rt_err_t rt_at32_emac_control(rt_device_t dev, int cmd, void *args)
*/
rt_err_t rt_at32_emac_tx(rt_device_t dev, struct pbuf *p)
{
rt_err_t ret = RT_ERROR;
rt_err_t ret = -RT_ERROR;
struct pbuf *q;
rt_uint32_t offset;

2
bsp/efm32/drv_sdcard.c
View File

@ -445,7 +445,7 @@ static rt_err_t efm_spiSd_writeBlock(void *buffer, rt_uint8_t token)
rt_uint8_t buf_res[8]; /* Expect a byte for data response */
rt_uint8_t i;
ret = RT_ERROR;
ret = -RT_ERROR;
sdcard_debug("SPISD: Write block\n");
do
{

2
bsp/essemi/es32f0654/drivers/drv_i2c.c
View File

@ -112,7 +112,7 @@ static rt_ssize_t es32f0_master_xfer(struct rt_i2c_bus_device *bus,
{
struct rt_i2c_msg *msg;
rt_uint32_t i;
rt_err_t ret = RT_ERROR;
rt_err_t ret = -RT_ERROR;
for (i = 0; i < num; i++)
{

4
bsp/essemi/es32f0654/drivers/drv_spi.c
View File

@ -162,7 +162,7 @@ rt_err_t spi_configure(struct rt_spi_device *device,
return RT_EOK;
}
static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message *message)
static rt_ssize_t spixfer(struct rt_spi_device *device, struct rt_spi_message *message)
{
rt_err_t res;
spi_handle_t *hspi;
@ -208,7 +208,7 @@ static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message *
}
if (res != RT_EOK)
return RT_ERROR;
return -RT_ERROR;
else
return message->length;

2
bsp/essemi/es32f369x/drivers/drv_i2c.c
View File

@ -271,7 +271,7 @@ static rt_ssize_t es32f3_master_xfer(struct rt_i2c_bus_device *bus,
{
struct rt_i2c_msg *msg;
rt_uint32_t i;
rt_err_t ret = RT_ERROR;
rt_err_t ret = -RT_ERROR;
for (i = 0; i < num; i++)
{

4
bsp/essemi/es32f369x/drivers/drv_spi.c
View File

@ -162,7 +162,7 @@ rt_err_t spi_configure(struct rt_spi_device *device,
return RT_EOK;
}
static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message *message)
static rt_ssize_t spixfer(struct rt_spi_device *device, struct rt_spi_message *message)
{
rt_err_t res;
spi_handle_t *hspi;
@ -208,7 +208,7 @@ static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message *
}
if (res != RT_EOK)
return RT_ERROR;
return -RT_ERROR;
else
return message->length;

10
bsp/ft2004/drivers/drv_qspi.c
View File

@ -62,7 +62,7 @@ static rt_err_t ft2004_cmdOperation(struct ft2004_qspi_bus *qspi_bus_p, struct r
if (qspi_message->instruction.qspi_lines == 0)
{
LOG_E("instruction is not valid");
return RT_ERROR;
return -RT_ERROR;
}
cmd_pack.cmd = qspi_message->instruction.content;
@ -130,13 +130,13 @@ static rt_err_t ft2004_cmdOperation(struct ft2004_qspi_bus *qspi_bus_p, struct r
}
#endif
return (ret == FQSPI_SUCCESS) ? RT_EOK : RT_ERROR;
return (ret == FQSPI_SUCCESS) ? RT_EOK : -RT_ERROR;
}
static rt_uint32_t ft2004_qspi_xfer(struct ft2004_qspi_bus *qspi_bus_p, struct rt_spi_message *message)
static rt_ssize_t ft2004_qspi_xfer(struct ft2004_qspi_bus *qspi_bus_p, struct rt_spi_message *message)
{
struct rt_qspi_message *qspi_message = (struct rt_qspi_message *)message;
rt_uint32_t ret_length = 0;
rt_ssize_t ret_length = 0;
const rt_uint8_t *sndb = message->send_buf;
rt_uint8_t *rcvb = message->recv_buf;
rt_int32_t length = message->length;
@ -159,7 +159,7 @@ static rt_uint32_t ft2004_qspi_xfer(struct ft2004_qspi_bus *qspi_bus_p, struct r
if (qspi_config_p->channel >= FT_QSPI_MAX_CS_NUM)
{
LOG_E("invalid channel[%x] ", qspi_config_p->channel);
return RT_ERROR;
return -RT_ERROR;
}
switch (cmd)
{

4
bsp/ft2004/drivers/drv_sdcard.c
View File

@ -38,7 +38,7 @@ static rt_err_t _sdcard_mount(void)
if (mmcsd_wait_cd_changed(rt_tick_from_millisecond(5000)) == -RT_ETIMEOUT)
{
rt_kprintf("timeout \r\n");
return RT_ERROR;
return -RT_ERROR;
}
device = rt_device_find("sd0");
}
@ -54,7 +54,7 @@ static rt_err_t _sdcard_mount(void)
else
{
LOG_W("sd card mount to '/' failed!");
return RT_ERROR;
return -RT_ERROR;
}
}

20
bsp/fujitsu/mb9x/mb9bf506r/drivers/fm3_uart.c
View File

@ -408,7 +408,7 @@ static rt_err_t uart03_configure(struct rt_serial_device *serial, struct serial_
uart->uart_regs->ESCR_f.ESBL = 1;
break;
default:
return RT_ERROR;
return -RT_ERROR;
}
/* set data bits */
@ -440,7 +440,7 @@ static rt_err_t uart03_configure(struct rt_serial_device *serial, struct serial_
uart->uart_regs->ESCR_f.L2 = 1;
break;
default:
return RT_ERROR;
return -RT_ERROR;
}
/* set parity */
@ -458,7 +458,7 @@ static rt_err_t uart03_configure(struct rt_serial_device *serial, struct serial_
uart->uart_regs->ESCR_f.P = 1;
break;
default:
return RT_ERROR;
return -RT_ERROR;
}
/* set bit order */
@ -471,7 +471,7 @@ static rt_err_t uart03_configure(struct rt_serial_device *serial, struct serial_
uart->uart_regs->SMR_f.BDS = 1;
break;
default:
return RT_ERROR;
return -RT_ERROR;
}
/* set NRZ mode */
@ -484,7 +484,7 @@ static rt_err_t uart03_configure(struct rt_serial_device *serial, struct serial_
uart->uart_regs->ESCR_f.INV = 1;
break;
default:
return RT_ERROR;
return -RT_ERROR;
}
uart->uart_regs->SCR = SCR_RXE | SCR_TXE | SCR_RIE;
@ -588,7 +588,7 @@ static rt_err_t uart47_configure(struct rt_serial_device *serial, struct serial_
uart->uart_regs->ESCR_f.ESBL = 1;
break;
default:
return RT_ERROR;
return -RT_ERROR;
}
/* set data bits */
@ -620,7 +620,7 @@ static rt_err_t uart47_configure(struct rt_serial_device *serial, struct serial_
uart->uart_regs->ESCR_f.L2 = 1;
break;
default:
return RT_ERROR;
return -RT_ERROR;
}
/* set parity */
@ -638,7 +638,7 @@ static rt_err_t uart47_configure(struct rt_serial_device *serial, struct serial_
uart->uart_regs->ESCR_f.P = 1;
break;
default:
return RT_ERROR;
return -RT_ERROR;
}
/* set bit order */
@ -651,7 +651,7 @@ static rt_err_t uart47_configure(struct rt_serial_device *serial, struct serial_
uart->uart_regs->SMR_f.BDS = 1;
break;
default:
return RT_ERROR;
return -RT_ERROR;
}
/* set NRZ mode */
@ -664,7 +664,7 @@ static rt_err_t uart47_configure(struct rt_serial_device *serial, struct serial_
uart->uart_regs->ESCR_f.INV = 1;
break;
default:
return RT_ERROR;
return -RT_ERROR;
}
/* configure fifo */

2
bsp/gd32/arm/libraries/gd32_drivers/drv_spi_flash.c
View File

@ -59,7 +59,7 @@ static int rt_hw_spi_flash_with_sfud_init(void)
{
if (RT_NULL == rt_sfud_flash_probe(SPI_FLASH_CHIP, SPI_FLASH_DEVICE_NAME))
{
return RT_ERROR;
return -RT_ERROR;
};
return RT_EOK;

2
bsp/gd32105c-eval/drivers/drv_i2c.c
View File

@ -229,7 +229,7 @@ static rt_ssize_t gd32_i2c_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg
{
struct rt_i2c_msg *msg;
rt_uint32_t i;
rt_err_t ret = RT_ERROR;
rt_err_t ret = -RT_ERROR;
struct gd32_i2c_bus *gd32_i2c = (struct gd32_i2c_bus *)bus;

2
bsp/gd32105c-eval/drivers/drv_spi_flash.c
View File

@ -43,7 +43,7 @@ static int rt_hw_spi_flash_with_sfud_init(void)
{
if (RT_NULL == rt_sfud_flash_probe(SPI_FLASH_DEVICE_NAME, SPI_DEVICE_NAME))
{
return RT_ERROR;
return -RT_ERROR;
}
return RT_EOK;

2
bsp/gd32107c-eval/drivers/drv_i2c.c
View File

@ -229,7 +229,7 @@ static rt_ssize_t gd32_i2c_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg
{
struct rt_i2c_msg *msg;
rt_uint32_t i;
rt_err_t ret = RT_ERROR;
rt_err_t ret = -RT_ERROR;
struct gd32_i2c_bus *gd32_i2c = (struct gd32_i2c_bus *)bus;

2
bsp/gd32107c-eval/drivers/drv_spi_flash.c
View File

@ -43,7 +43,7 @@ static int rt_hw_spi_flash_with_sfud_init(void)
{
if (RT_NULL == rt_sfud_flash_probe(SPI_FLASH_DEVICE_NAME, SPI_DEVICE_NAME))
{
return RT_ERROR;
return -RT_ERROR;
}
return RT_EOK;

2
bsp/gd32303e-eval/drivers/drv_i2c.c
View File

@ -230,7 +230,7 @@ static rt_ssize_t gd32_i2c_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg
{
struct rt_i2c_msg *msg;
rt_uint32_t i;
rt_err_t ret = RT_ERROR;
rt_err_t ret = -RT_ERROR;
struct gd32_i2c_bus *gd32_i2c = (struct gd32_i2c_bus *)bus;

2
bsp/gd32303e-eval/drivers/drv_spi_flash.c
View File

@ -44,7 +44,7 @@ static int rt_hw_spi_flash_with_sfud_init(void)
{
if (RT_NULL == rt_sfud_flash_probe(SPI_FLASH_DEVICE_NAME, SPI_DEVICE_NAME))
{
return RT_ERROR;
return -RT_ERROR;
}
return RT_EOK;

2
bsp/gd32450z-eval/drivers/drv_spi.c
View File

@ -320,6 +320,6 @@ rt_err_t gd32_spi_bus_register(uint32_t spi_periph,
}
}
return RT_ERROR;
return -RT_ERROR;
}
#endif

2
bsp/gd32450z-eval/drivers/drv_spi_flash.c
View File

@ -76,7 +76,7 @@ static int rt_hw_spi_flash_with_sfud_init(void)
{
if (RT_NULL == rt_sfud_flash_probe(SPI_FLASH_CHIP, SPI_FLASH_DEVICE_NAME))
{
return RT_ERROR;
return -RT_ERROR;
};
return RT_EOK;

2
bsp/gd32e230k-start/drivers/drv_i2c.c
View File

@ -231,7 +231,7 @@ static rt_ssize_t gd32_i2c_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg
{
struct rt_i2c_msg *msg;
rt_uint32_t i;
rt_err_t ret = RT_ERROR;
rt_err_t ret = -RT_ERROR;
struct gd32_i2c_bus *gd32_i2c = (struct gd32_i2c_bus *)bus;

26
bsp/hc32/ev_hc32f4a0_lqfp176/board/ports/tca9539.c
View File

@ -156,7 +156,7 @@ rt_err_t TCA9539_WritePin(uint8_t u8Port, uint8_t u8Pin, uint8_t u8PinState)
u8TempData[0] = u8Port + TCA9539_REG_OUTPUT_PORT0;
if (RT_EOK != BSP_TCA9539_I2C_Read(i2c_bus, u8TempData[0], &u8TempData[1], 1U))
{
return RT_ERROR;
return -RT_ERROR;
}
if (0U == u8PinState)
{
@ -168,7 +168,7 @@ rt_err_t TCA9539_WritePin(uint8_t u8Port, uint8_t u8Pin, uint8_t u8PinState)
}
if (RT_EOK != BSP_TCA9539_I2C_Write(i2c_bus, u8TempData[0], &u8TempData[1], 1U))
{
return RT_ERROR;
return -RT_ERROR;
}
return RT_EOK;
@ -196,7 +196,7 @@ rt_err_t TCA9539_ReadPin(uint8_t u8Port, uint8_t u8Pin, uint8_t *pu8PinState)
u8TempData[0] = u8Port + TCA9539_REG_INPUT_PORT0;
if (RT_EOK != BSP_TCA9539_I2C_Read(i2c_bus, u8TempData[0], &u8TempData[1], 1U))
{
return RT_ERROR;
return -RT_ERROR;
}
if (0U != (u8TempData[1] & u8Pin))
{
@ -219,7 +219,7 @@ rt_err_t TCA9539_ReadPin(uint8_t u8Port, uint8_t u8Pin, uint8_t *pu8PinState)
* This parameter can be one or any combination of the following values:
* @arg @ref TCA9539_Pin_Definition
* @retval rt_err_t:
* - RT_ERROR
* - -RT_ERROR
* - RT_EOK
*/
rt_err_t TCA9539_TogglePin(uint8_t u8Port, uint8_t u8Pin)
@ -229,12 +229,12 @@ rt_err_t TCA9539_TogglePin(uint8_t u8Port, uint8_t u8Pin)
u8TempData[0] = u8Port + TCA9539_REG_OUTPUT_PORT0;
if (RT_EOK != BSP_TCA9539_I2C_Read(i2c_bus, u8TempData[0], &u8TempData[1], 1U))
{
return RT_ERROR;
return -RT_ERROR;
}
u8TempData[1] ^= u8Pin;
if (RT_EOK != BSP_TCA9539_I2C_Write(i2c_bus, u8TempData[0], &u8TempData[1], 1U))
{
return RT_ERROR;
return -RT_ERROR;
}
return RT_EOK;
@ -252,7 +252,7 @@ rt_err_t TCA9539_TogglePin(uint8_t u8Port, uint8_t u8Pin)
* This parameter can be one of the following values:
* @arg @ref TCA9539_Direction_Definition
* @retval rt_err_t:
* - RT_ERROR
* - -RT_ERROR
* - RT_EOK
*/
rt_err_t TCA9539_ConfigPin(uint8_t u8Port, uint8_t u8Pin, uint8_t u8Dir)
@ -262,7 +262,7 @@ rt_err_t TCA9539_ConfigPin(uint8_t u8Port, uint8_t u8Pin, uint8_t u8Dir)
u8TempData[0] = u8Port + TCA9539_REG_CONFIG_PORT0;
if (RT_EOK != BSP_TCA9539_I2C_Read(i2c_bus, u8TempData[0], &u8TempData[1], 1U))
{
return RT_ERROR;
return -RT_ERROR;
}
if (TCA9539_DIR_OUT == u8Dir)
{
@ -274,7 +274,7 @@ rt_err_t TCA9539_ConfigPin(uint8_t u8Port, uint8_t u8Pin, uint8_t u8Dir)
}
if (RT_EOK != BSP_TCA9539_I2C_Write(i2c_bus, u8TempData[0], &u8TempData[1], 1U))
{
return RT_ERROR;
return -RT_ERROR;
}
return RT_EOK;
@ -284,7 +284,7 @@ rt_err_t TCA9539_ConfigPin(uint8_t u8Port, uint8_t u8Pin, uint8_t u8Dir)
* @brief Initialize TCA9539.
* @param [in] None
* @retval rt_err_t:
* - RT_ERROR
* - -RT_ERROR
* - RT_EOK
*/
int TCA9539_Init(void)
@ -298,19 +298,19 @@ int TCA9539_Init(void)
if (i2c_bus == RT_NULL)
{
rt_kprintf("can't find %s device!\n", BSP_TCA9539_I2C_BUS_NAME);
return RT_ERROR;
return -RT_ERROR;
}
/* All Pins are input as default */
u8TempData[0] = TCA9539_REG_CONFIG_PORT0;
u8TempData[1] = 0xFFU;
if (RT_EOK != BSP_TCA9539_I2C_Write(i2c_bus, u8TempData[0], &u8TempData[1], 1U))
{
return RT_ERROR;
return -RT_ERROR;
}
u8TempData[0] = TCA9539_REG_CONFIG_PORT1;
if (RT_EOK != BSP_TCA9539_I2C_Write(i2c_bus, u8TempData[0], &u8TempData[1], 1U))
{
return RT_ERROR;
return -RT_ERROR;
}
return RT_EOK;

2
bsp/hc32/libraries/hc32_drivers/drv_adc.c
View File

@ -160,7 +160,7 @@ static rt_err_t _adc_enable(struct rt_adc_device *device, rt_uint32_t channel, r
static rt_err_t _adc_convert(struct rt_adc_device *device, rt_uint32_t channel, rt_uint32_t *value)
{
rt_err_t rt_ret = RT_ERROR;
rt_err_t rt_ret = -RT_ERROR;
if (!value)
{

2
bsp/hc32/libraries/hc32_drivers/drv_can.c
View File

@ -390,7 +390,7 @@ static int _can_sendmsg(struct rt_can_device *can, const void *buf, rt_uint32_t
ll_ret = CAN_FillTxFrame(p_can_dev->instance, CAN_TX_BUF_PTB, &stc_tx_frame);
if (ll_ret != LL_OK)
{
return RT_ERROR;
return -RT_ERROR;
}
/* Request transmission */
CAN_StartTx(p_can_dev->instance, CAN_TX_REQ_PTB);

2
bsp/hc32/libraries/hc32_drivers/drv_eth.c
View File

@ -219,7 +219,7 @@ static rt_err_t rt_hc32_eth_control(rt_device_t dev, int cmd, void *args)
/* transmit data*/
rt_err_t rt_hc32_eth_tx(rt_device_t dev, struct pbuf *p)
{
rt_err_t errval = RT_ERROR;
rt_err_t errval = -RT_ERROR;
struct pbuf *q;
uint8_t *txBuffer;
__IO stc_eth_dma_desc_t *DmaTxDesc;

2
bsp/hc32/libraries/hc32_drivers/drv_pwm_tmra.c
View File

@ -176,7 +176,7 @@ static rt_err_t drv_pwm_set(CM_TMRA_TypeDef *TMRAx, struct rt_pwm_configuration
if (u64val < 0xFFFF) break;
u64val /= 2;
}
if (div_bit > 10) return RT_ERROR;
if (div_bit > 10) return -RT_ERROR;
//
TMRA_SetClockDiv(TMRAx, div_bit << TMRA_BCSTR_CKDIV_POS);
u32clkFreq = get_tmra_clk_freq(TMRAx);

4
bsp/hpmicro/hpm6750evk/board/eth_phy_port.c
View File

@ -272,7 +272,7 @@ static void phy_monitor_thread_entry(void *args)
int phy_device_register(void)
{
rt_err_t err = RT_ERROR;
rt_err_t err = -RT_ERROR;
rt_thread_t thread_phy_monitor;
/* Set ops for PHY */
@ -308,7 +308,7 @@ int phy_device_register(void)
}
else
{
err = RT_ERROR;
err = -RT_ERROR;
}
return err;

4
bsp/hpmicro/hpm6750evkmini/board/eth_phy_port.c
View File

@ -251,7 +251,7 @@ static void phy_monitor_thread_entry(void *args)
int phy_device_register(void)
{
rt_err_t err = RT_ERROR;
rt_err_t err = -RT_ERROR;
rt_thread_t thread_phy_monitor;
/* Set ops for PHY */
@ -287,7 +287,7 @@ int phy_device_register(void)
}
else
{
err = RT_ERROR;
err = -RT_ERROR;
}
return err;

14
bsp/hpmicro/libraries/drivers/drv_adc.c
View File

@ -99,7 +99,7 @@ static rt_err_t init_adc_config(hpm_rtt_adc *adc)
cfg.adc_clk_div = 1;
ret = adc12_init(adc->adc_base, &cfg);
if (ret != status_success) {
return RT_ERROR;
return -RT_ERROR;
}
#endif
@ -113,7 +113,7 @@ static rt_err_t init_adc_config(hpm_rtt_adc *adc)
cfg.sel_sync_ahb = true;
ret = adc16_init(adc->adc_base, &cfg);
if (ret != status_success) {
return RT_ERROR;
return -RT_ERROR;
}
#endif
return RT_EOK;
@ -131,7 +131,7 @@ static rt_err_t init_channel_config(hpm_rtt_adc *adc)
ret = adc12_init_channel(adc->adc_base, &ch_cfg);
if (ret != status_success) {
return RT_ERROR;
return -RT_ERROR;
}
#endif
@ -145,7 +145,7 @@ static rt_err_t init_channel_config(hpm_rtt_adc *adc)
ret = adc16_init_channel(adc->adc_base, &ch_cfg);
if (ret != status_success) {
return RT_ERROR;
return -RT_ERROR;
}
#endif
return RT_EOK;
@ -160,12 +160,12 @@ static rt_err_t hpm_adc_enabled(struct rt_adc_device *device, rt_uint32_t channe
hpm_adc_handler = (hpm_rtt_adc *)device->parent.user_data;
ret = init_adc_config(hpm_adc_handler);
if (ret != RT_EOK) {
return RT_ERROR;
return -RT_ERROR;
}
hpm_adc_handler->channel = channel;
ret = init_channel_config(hpm_adc_handler);
if (ret != RT_EOK) {
return RT_ERROR;
return -RT_ERROR;
}
return RT_EOK;
@ -208,7 +208,7 @@ int rt_hw_adc_init(void)
for (uint32_t i = 0; i < adc_nums; i++) {
ret = rt_hw_adc_register(&hpm_adc_config_tbl[i].hpm_adc_device, hpm_adc_config_tbl[i].adc_name, &hpm_adc_ops, &hpm_adc_config_tbl[i]);
if (ret != RT_EOK) {
ret = RT_ERROR;
ret = -RT_ERROR;
break;
}
}

4
bsp/hpmicro/libraries/drivers/drv_enet.c
View File

@ -239,7 +239,7 @@ static rt_err_t rt_hpm_eth_control(rt_device_t dev, int cmd, void * args)
static rt_err_t rt_hpm_eth_tx(rt_device_t dev, struct pbuf * p)
{
rt_err_t ret = RT_ERROR;
rt_err_t ret = -RT_ERROR;
uint32_t status;
enet_device *enet_dev = (enet_device *)dev->user_data;
uint32_t tx_buff_size = enet_dev->desc.tx_buff_cfg.size;
@ -436,7 +436,7 @@ SDK_DECLARE_EXT_ISR_M(IRQn_ENET1, isr_enet1)
int rt_hw_eth_init(void)
{
rt_err_t err = RT_ERROR;
rt_err_t err = -RT_ERROR;
for (uint32_t i = 0; i < ARRAY_SIZE(s_geths); i++)
{

2
bsp/hpmicro/libraries/drivers/drv_i2c.c
View File

@ -74,7 +74,7 @@ static rt_ssize_t hpm_i2c_master_transfer(struct rt_i2c_bus_device *bus, struct
struct hpm_i2c *i2c_info = (struct hpm_i2c *)bus;
hpm_stat_t i2c_stat = status_success;
rt_err_t ret = RT_ERROR;
rt_err_t ret = -RT_ERROR;
rt_uint32_t i;
for (i = 0; i < num; i++)

2
bsp/hpmicro/libraries/drivers/drv_i2s.c
View File

@ -434,7 +434,7 @@ static rt_err_t hpm_i2s_start(struct rt_audio_device* audio, int stream)
}
if (RT_EOK != hpm_i2s_transmit(&hpm_audio->audio, NULL, hpm_audio->rx_buff, I2S_FIFO_SIZE)) {
return RT_ERROR;
return -RT_ERROR;
}
} else {
return -RT_ERROR;

4
bsp/hpmicro/libraries/drivers/drv_pdm.c
View File

@ -217,7 +217,7 @@ static rt_err_t hpm_pdm_start(struct rt_audio_device* audio, int stream)
}
if (RT_EOK != hpm_pdm_dma_transmit()) {
return RT_ERROR;
return -RT_ERROR;
}
}
@ -254,7 +254,7 @@ static rt_err_t hpm_pdm_dma_transmit()
if (status_success != dma_setup_channel(dma_resource.base, dma_resource.channel, &ch_config)) {
LOG_E("dma setup channel failed\n");
return RT_ERROR;
return -RT_ERROR;
}
if (l1c_dc_is_enabled()) {

6
bsp/hpmicro/libraries/drivers/drv_uart_v2.c
View File

@ -704,7 +704,7 @@ hpm_stat_t hpm_uart_dma_tx_init(struct hpm_uart *uart_ctx)
return status;
}
static int hpm_uart_dma_config(struct rt_serial_device *serial, void *arg)
static rt_err_t hpm_uart_dma_config(struct rt_serial_device *serial, void *arg)
{
rt_ubase_t ctrl_arg = (rt_ubase_t) arg;
struct hpm_uart *uart = (struct hpm_uart *)serial->parent.user_data;
@ -720,7 +720,7 @@ static int hpm_uart_dma_config(struct rt_serial_device *serial, void *arg)
config.src_fixed = true;
config.size_in_byte = serial->config.rx_bufsz;
if (status_success != dma_setup_handshake(uart->rx_chn_ctx.resource.base, &config)) {
return RT_ERROR;
return -RT_ERROR;
}
uint32_t mux = DMA_SOC_CHN_TO_DMAMUX_CHN(uart->rx_chn_ctx.resource.base, uart->rx_dma_mux);
dmamux_config(BOARD_UART_DMAMUX, uart->rx_chn_ctx.resource.channel, mux, true);
@ -1288,7 +1288,7 @@ int rt_hw_uart_init(void)
}
if (RT_EOK != hpm_uart_config()) {
return RT_ERROR;
return -RT_ERROR;
}
for (uint32_t i = 0; i < sizeof(uarts) / sizeof(uarts[0]); i++) {

20
bsp/imxrt/libraries/drivers/drv_can.c
View File

@ -263,7 +263,7 @@ static rt_err_t can_control(struct rt_can_device *can_dev, int cmd, void *arg)
if (filter_mask == 0xffffffff)
{
LOG_E("%s filter is full!\n", can->name);
res = RT_ERROR;
res = -RT_ERROR;
break;
}
else if (filter_mask == 0)
@ -316,7 +316,7 @@ static rt_err_t can_control(struct rt_can_device *can_dev, int cmd, void *arg)
{
if (filter_mask & (1 << item->hdr_bank))
{
res = RT_ERROR;
res = -RT_ERROR;
LOG_E("%s hdr%d filter already set!\n", can->name, item->hdr_bank);
break;
}
@ -338,28 +338,28 @@ static rt_err_t can_control(struct rt_can_device *can_dev, int cmd, void *arg)
break;
case RT_CAN_CMD_SET_BAUD:
res = RT_ERROR;
res = -RT_ERROR;
break;
case RT_CAN_CMD_SET_MODE:
res = RT_ERROR;
res = -RT_ERROR;
break;
case RT_CAN_CMD_SET_PRIV:
res = RT_ERROR;
res = -RT_ERROR;
break;
case RT_CAN_CMD_GET_STATUS:
FLEXCAN_GetBusErrCount(can->base, (rt_uint8_t *)(&can->can_dev.status.snderrcnt), (rt_uint8_t *)(&can->can_dev.status.rcverrcnt));
rt_memcpy(arg, &can->can_dev.status, sizeof(can->can_dev.status));
break;
default:
res = RT_ERROR;
res = -RT_ERROR;
break;
}
return res;
}
static int can_send(struct rt_can_device *can_dev, const void *buf, rt_uint32_t boxno)
static rt_ssize_t can_send(struct rt_can_device *can_dev, const void *buf, rt_uint32_t boxno)
{
struct imxrt_can *can;
struct rt_can_msg *msg;
@ -420,14 +420,14 @@ static int can_send(struct rt_can_device *can_dev, const void *buf, rt_uint32_t
ret = RT_EOK;
break;
case kStatus_Fail:
ret = RT_ERROR;
ret = -RT_ERROR;
break;
case kStatus_FLEXCAN_TxBusy:
ret = RT_EBUSY;
ret = -RT_EBUSY;
break;
}
return ret;
return (rt_ssize_t)ret;
}
static int can_recv(struct rt_can_device *can_dev, void *buf, rt_uint32_t boxno)

2
bsp/imxrt/libraries/drivers/drv_i2c.c
View File

@ -375,7 +375,7 @@ static rt_err_t imxrt_i2c_bus_control(struct rt_i2c_bus_device *bus,
rt_uint32_t cmd,
rt_uint32_t arg)
{
return RT_ERROR;
return -RT_ERROR;
}
#endif

2
bsp/imxrt/libraries/drivers/drv_rtc.c
View File

@ -183,7 +183,7 @@ static int rtc_sample(int argc, char *argv[])
if (!device)
{
LOG_E("find %s failed!", RTC_NAME);
return RT_ERROR;
return -RT_ERROR;
}
if(rt_device_open(device, 0) != RT_EOK)

2
bsp/imxrt/libraries/drivers/drv_usbd.c
View File

@ -220,7 +220,7 @@ static rt_err_t drv_ehci0_usbd_init(rt_device_t device)
else
{
rt_kprintf("USB_DeviceInit ehci0 error\r\n");
return RT_ERROR;
return -RT_ERROR;
}
return RT_EOK;
}

2
bsp/k210/drivers/drv_lcd.c
View File

@ -390,7 +390,7 @@ static rt_err_t drv_lcd_init(rt_device_t dev)
if(!lcd)
{
return RT_ERROR;
return -RT_ERROR;
}
drv_lcd_hw_init(lcd);
/* reset LCD */

2
bsp/loongson/ls1cdev/drivers/display_controller.c
View File

@ -134,7 +134,7 @@ static rt_err_t rt_dc_init(rt_device_t dev)
if (mode<0)
{
rt_kprintf("\n\n\nunsupported framebuffer resolution\n\n\n");
return RT_ERROR;
return -RT_ERROR;
}
DC_FB_CONFIG = 0x0;

4
bsp/loongson/ls1cdev/drivers/drv_can.c
View File

@ -276,7 +276,7 @@ static rt_err_t control(struct rt_can_device *can, int cmd, void *arg)
argval != RT_CAN_MODE_LOOPBACK ||
argval != RT_CAN_MODE_LOOPBACKANLISTEN)
{
return RT_ERROR;
return -RT_ERROR;
}
if (argval != can->config.mode)
{
@ -294,7 +294,7 @@ static rt_err_t control(struct rt_can_device *can, int cmd, void *arg)
argval != CAN100kBaud &&
argval != CAN50kBaud )
{
return RT_ERROR;
return -RT_ERROR;
}
if (argval != can->config.baud_rate)
{

2
bsp/loongson/ls1cdev/drivers/drv_touch.c
View File

@ -229,7 +229,7 @@ static int rt_touch_init(void)
return rt_thread_startup(thread);
}
return RT_ERROR;
return -RT_ERROR;
}
INIT_APP_EXPORT(rt_touch_init);

10
bsp/loongson/ls1cdev/drivers/drv_wdt.c
View File

@ -36,7 +36,7 @@ static rt_err_t wdt_stop(void)
if (ret != RT_EOK)
{
rt_kprintf("Wdog_Disable error!\n");
return RT_ERROR;
return -RT_ERROR;
}
return ret;
}
@ -50,7 +50,7 @@ static rt_err_t wdt_start(int mode)
if (ret != RT_EOK)
{
rt_kprintf("Wdog_Disable error!\n");
return RT_ERROR;
return -RT_ERROR;
}
if((mode == RESTENABLE) || (mode == INTERRUPTENABLE))
@ -62,7 +62,7 @@ static rt_err_t wdt_start(int mode)
if (ret != RT_EOK)
{
rt_kprintf("Wdog_Enable error!\n");
return RT_ERROR;
return -RT_ERROR;
}
return ret;
@ -79,7 +79,7 @@ static rt_err_t wdt_keepalive(void)
if (ret != 0)
{
rt_kprintf("LS1C_Wdog_ClrTimeout error!\n");
return RT_ERROR;
return -RT_ERROR;
}
return ret;
@ -106,7 +106,7 @@ static rt_err_t wdt_set_timeout(rt_uint32_t second)
if (ret != RT_EOK)
{
rt_kprintf("Wdog_LoadValue error!\n");
return RT_ERROR;
return -RT_ERROR;
}
return ret;
}

2
bsp/loongson/ls2kdev/drivers/drv_uart.c
View File

@ -44,7 +44,7 @@ static rt_err_t ls2k_uart_set_buad(struct rt_serial_device *serial, struct seria
UART_LCR(uart_dev->base) = 0x80; // Activate buadcfg
UART_LSB(uart_dev->base) = brtc & 0xff;
UART_MSB(uart_dev->base) = brtc >> 8;
if (((((short)UART_MSB(uart_dev->base)) << 8) | UART_LSB(uart_dev->base)) != brtc) ret = RT_ERROR;
if (((((short)UART_MSB(uart_dev->base)) << 8) | UART_LSB(uart_dev->base)) != brtc) ret = -RT_ERROR;
UART_LCR(uart_dev->base) = CFCR_8BITS; // Back to normal
UART_MCR(uart_dev->base) = MCR_IENABLE/* | MCR_DTR | MCR_RTS*/;
UART_IER(uart_dev->base) = 0;

12
bsp/lpc54114-lite/drivers/drv_gpio.c
View File

@ -146,7 +146,7 @@ static int lpc_pin_read(rt_device_t dev, rt_base_t pin)
int portx, piny, value;
if(pin > PIN_MAX_VAL)
return RT_ERROR;
return -RT_ERROR;
portx = get_port(pin);
piny = get_pin(pin);
@ -187,7 +187,7 @@ static rt_err_t lpc_pin_attach_irq(struct rt_device *device, rt_int32_t pin,
int portx, piny, trigger_mode, pin_initx, pintsel, pin_cfg, i;
if(pin > PIN_MAX_VAL)
return RT_ERROR;
return -RT_ERROR;
portx = get_port(pin);
piny = get_pin(pin);
@ -228,7 +228,7 @@ static rt_err_t lpc_pin_attach_irq(struct rt_device *device, rt_int32_t pin,
}
if(i >= IRQ_MAX_VAL)
return RT_ERROR;
return -RT_ERROR;
/* open clk */
CLOCK_EnableClock(kCLOCK_InputMux);
@ -258,7 +258,7 @@ static rt_err_t lpc_pin_detach_irq(struct rt_device *device, rt_int32_t pin)
int i;
if(pin > PIN_MAX_VAL)
return RT_ERROR;
return -RT_ERROR;
for(i = 0; i < IRQ_MAX_VAL; i++)
{
@ -280,7 +280,7 @@ static rt_err_t lpc_pin_irq_enable(struct rt_device *device, rt_base_t pin,
int irqn_type, i;
if(pin > PIN_MAX_VAL)
return RT_ERROR;
return -RT_ERROR;
for(i = 0; i < IRQ_MAX_VAL; i++)
{
@ -318,7 +318,7 @@ static rt_err_t lpc_pin_irq_enable(struct rt_device *device, rt_base_t pin,
}
if(i >= IRQ_MAX_VAL)
return RT_ERROR;
return -RT_ERROR;
return RT_EOK;
}

2
bsp/lpc54114-lite/drivers/drv_spi_flash.c
View File

@ -26,7 +26,7 @@ int rt_hw_flash_init(void)
if(rt_sfud_flash_probe("flash0", "spi20") == RT_NULL)
{
return RT_ERROR;
return -RT_ERROR;
}
return RT_EOK;

8
bsp/lpc54608-LPCXpresso/drivers/drv_emac.c
View File

@ -288,7 +288,7 @@ static rt_err_t lpc_emac_phy_init(phy_speed_t * speed, phy_duplex_t * duplex)
eth_device_linkchange(&lpc_emac_device.parent, RT_FALSE);
ETH_PRINTF("PHY_Init failed!\n");
return RT_ERROR;
return -RT_ERROR;
}
/* Wait for link up and get the actual PHY link speed. */
@ -428,7 +428,7 @@ rt_err_t lpc_emac_tx(rt_device_t dev, struct pbuf *p)
if (p->tot_len > ENET_TXBUFF_SIZE)
{
return RT_ERROR;
return -RT_ERROR;
}
packet_dump("TX dump", p);
@ -439,7 +439,7 @@ rt_err_t lpc_emac_tx(rt_device_t dev, struct pbuf *p)
result = rt_sem_take(&lpc_emac_device.tx_wait, RT_TICK_PER_SECOND/10);
if (result != RT_EOK)
{
return RT_ERROR;
return -RT_ERROR;
}
}
@ -453,7 +453,7 @@ rt_err_t lpc_emac_tx(rt_device_t dev, struct pbuf *p)
if ((result == kStatus_ENET_TxFrameFail) || (result == kStatus_ENET_TxFrameOverLen) || (result == kStatus_ENET_TxFrameBusy))
{
return RT_ERROR;
return -RT_ERROR;
}
return RT_EOK;

2
bsp/lpc54608-LPCXpresso/drivers/drv_i2c.c
View File

@ -149,7 +149,7 @@ static rt_ssize_t lpc_i2c_xfer(struct rt_i2c_bus_device *bus,
struct rt_i2c_msg *msg;
i2c_master_transfer_t xfer = {0};
rt_uint32_t i;
rt_err_t ret = RT_ERROR;
rt_err_t ret = -RT_ERROR;
struct lpc_i2c_bus *lpc_i2c = (struct lpc_i2c_bus *)bus;

2
bsp/lpc55sxx/Libraries/drivers/drv_i2c.c
View File

@ -89,7 +89,7 @@ static rt_ssize_t lpc_i2c_xfer(struct rt_i2c_bus_device *bus,
struct rt_i2c_msg *msg;
i2c_master_transfer_t xfer = {0};
rt_uint32_t i;
rt_err_t ret = RT_ERROR;
rt_err_t ret = -RT_ERROR;
struct lpc_i2c_bus *lpc_i2c = (struct lpc_i2c_bus *)bus;

2
bsp/lpc55sxx/Libraries/drivers/drv_mma8562.c
View File

@ -118,7 +118,7 @@ int mma8562_hw_init(void)
if (val != kMMA8562_WHO_AM_I_Device_ID)
{
rt_kprintf("MMA8562: Unexpected result from WHO_AM_I (0x%02x)\n", val);
return RT_ERROR;
return -RT_ERROR;
}
/* please refer to the "example FXOS8700CQ Driver Code" in FXOS8700 datasheet. */

12
bsp/lpc55sxx/Libraries/drivers/drv_pin.c
View File

@ -206,7 +206,7 @@ static rt_int8_t lpc_pin_read(rt_device_t dev, rt_base_t pin)
int value;
if ((pin > __ARRAY_LEN(lpc_pin_map)) || (pin == 0))
{
return RT_ERROR;
return -RT_ERROR;
}
value = GPIO_PinRead(lpc_pin_map[pin].gpio, lpc_pin_map[pin].gpio_port, lpc_pin_map[pin].gpio_pin);
@ -268,7 +268,7 @@ static rt_err_t lpc_pin_attach_irq(struct rt_device *device,
if ((pin > __ARRAY_LEN(lpc_pin_map)) || (pin == 0))
{
return RT_ERROR;
return -RT_ERROR;
}
switch (mode)
@ -307,7 +307,7 @@ static rt_err_t lpc_pin_attach_irq(struct rt_device *device,
}
if(i >= IRQ_MAX_VAL)
return RT_ERROR;
return -RT_ERROR;
/* Initialize PINT */
PINT_Init(PINT);
@ -342,7 +342,7 @@ static rt_err_t lpc_pin_detach_irq(struct rt_device *device, rt_base_t pin)
if ((pin > __ARRAY_LEN(lpc_pin_map)) || (pin == 0))
{
return RT_ERROR;
return -RT_ERROR;
}
for(i = 0; i < IRQ_MAX_VAL; i++)
@ -365,7 +365,7 @@ static rt_err_t lpc_pin_irq_enable(struct rt_device *device, rt_base_t pin, rt_u
if ((pin > __ARRAY_LEN(lpc_pin_map)) || (pin == 0))
{
return RT_ERROR;
return -RT_ERROR;
}
for(i = 0; i < IRQ_MAX_VAL; i++)
@ -404,7 +404,7 @@ static rt_err_t lpc_pin_irq_enable(struct rt_device *device, rt_base_t pin, rt_u
}
if(i >= IRQ_MAX_VAL)
return RT_ERROR;
return -RT_ERROR;
return RT_EOK;
}

8
bsp/maxim/libraries/HAL_Drivers/drv_spi.c
View File

@ -38,7 +38,7 @@ static struct mcu_drv_spi spi_bus_obj[sizeof(spi_config) / sizeof(spi_config[0])
* @brief This function config spi bus
* @param device
* @param configuration
* @retval RT_EOK / RT_ERROR
* @retval RT_EOK / -RT_ERROR
*/
static rt_err_t spi_configure(struct rt_spi_device *device,
struct rt_spi_configuration *configuration)
@ -63,7 +63,7 @@ static rt_err_t spi_configure(struct rt_spi_device *device,
break;
default:
LOG_E("spi_configure mode error %x\n", configuration->mode);
return RT_ERROR;
return -RT_ERROR;
}
tmp_spi->spixfer_req.width = SPI17Y_WIDTH_1;
@ -119,7 +119,7 @@ static const struct rt_spi_ops nrfx_spi_ops =
/*spi bus init*/
static int rt_hw_spi_bus_init(void)
{
rt_err_t result = RT_ERROR;
rt_err_t result = -RT_ERROR;
for (int i = 0; i < sizeof(spi_config) / sizeof(spi_config[0]); i++)
{
spi_bus_obj[i].spi_instance = spi_config[i].spi_instance;
@ -155,7 +155,7 @@ rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name,
if (result != RT_EOK)
{
LOG_E("%s attach to %s faild, %d", device_name, bus_name, result);
result = RT_ERROR;
result = -RT_ERROR;
}
/* TODO: SET THE GPIO */

2
bsp/maxim/libraries/HAL_Drivers/drv_spi.h
View File

@ -22,7 +22,7 @@
* @param bus_name spi bus name "spi0"/"spi1"/"spi2"
* @param device_name spi device name "spi0x"/"spi1x"/"spi2x"
* @param ss_pin spi ss pin number
* @retval RT_ERROR / RT_EOK
* @retval -RT_ERROR / RT_EOK
*/
rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name, rt_uint32_t ss_pin);

4
bsp/microchip/common/applications/can_demo.c
View File

@ -266,7 +266,7 @@ static void can_thread_entry(void* parameter)
*
* @param msg - message to be sent, timeouts - wait timeouts for Tx completion.
*
* @return RT_OK or RT_ERROR.
* @return RT_OK or -RT_ERROR.
*/
rt_err_t can_send_message(struct can_message *msg, rt_uint32_t timeouts)
@ -276,7 +276,7 @@ rt_err_t can_send_message(struct can_message *msg, rt_uint32_t timeouts)
if (RT_NULL == msg)
{
rt_kprintf("can_send_message input message error\r\n");
return RT_ERROR;
return -RT_ERROR;
}
can_async_write(&CAN_0, msg);

2
bsp/microchip/common/board/sam_gmac.c
View File

@ -332,7 +332,7 @@ static void rt_sam_eth_monitor(void *parameter)
*
* @param
*
* @return RT_OK or RT_ERROR.
* @return RT_OK or -RT_ERROR.
*/
static int rt_hw_sam_eth_init(void)

2
bsp/microchip/common/board/sam_i2c.c
View File

@ -93,7 +93,7 @@ static rt_err_t sam_i2c_bus_control(struct rt_i2c_bus_device *bus,
rt_uint32_t cmd,
rt_uint32_t arg)
{
return RT_ERROR;
return -RT_ERROR;
struct sam_i2c_bus *sam_i2c = (struct sam_i2c_bus *)bus;
RT_ASSERT(bus != RT_NULL);

2
bsp/n32/libraries/n32_drivers/drv_i2c.c
View File

@ -340,7 +340,7 @@ static rt_ssize_t rt_i2c_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg m
{
struct rt_i2c_msg *msg;
rt_uint32_t i;
rt_err_t ret = RT_ERROR;
rt_err_t ret = -RT_ERROR;
struct rt_i2c_bus *rt_i2c = (struct rt_i2c_bus *)bus;

2
bsp/n32g452xx/Libraries/rt_drivers/drv_spi.c
View File

@ -103,7 +103,7 @@ static rt_err_t n32_spi_init(struct n32_spi *spi_drv, struct rt_spi_configuratio
if (cfg->mode & RT_SPI_SLAVE)
{
/* SPI_InitStructure->SpiMode = SPI_MODE_SLAVE; */
return RT_ERROR;
return -RT_ERROR;
}
else
{

6
bsp/n32g452xx/n32g452xx-mini-system/board/msp/n32_msp.c
View File

@ -864,7 +864,7 @@ static int adc_vol_sample(int argc, char *argv[])
if (adc_dev == RT_NULL)
{
rt_kprintf("adc sample run failed! can't find %s device!\n", ADC_DEV_NAME);
return RT_ERROR;
return -RT_ERROR;
}
for (int i = 1; i <= 18; ++i)
@ -900,7 +900,7 @@ static int hwtimer_init(const char *name)
if (hw_dev == RT_NULL)
{
rt_kprintf("hwtimer sample run failed! can't find %s device!\n", name);
return RT_ERROR;
return -RT_ERROR;
}
ret = rt_device_open(hw_dev, RT_DEVICE_OFLAG_RDWR);
if (ret != RT_EOK)
@ -921,7 +921,7 @@ static int hwtimer_init(const char *name)
if (rt_device_write(hw_dev, 0, &timeout_s, sizeof(timeout_s)) != sizeof(timeout_s))
{
rt_kprintf("set timeout value failed\n");
return RT_ERROR;
return -RT_ERROR;
}
rt_thread_mdelay(3500);

2
bsp/nrf5x/libraries/drivers/drv_gpio.c
View File

@ -266,7 +266,7 @@ static rt_err_t nrf5x_pin_attach_irq(struct rt_device *device, rt_int32_t pin,
case NRFX_ERROR_NO_MEM:
return RT_ENOMEM;
default:
return RT_ERROR;
return -RT_ERROR;
}
}

2
bsp/nrf5x/libraries/drivers/drv_pwm.c
View File

@ -397,7 +397,7 @@ static int pwm_led_sample(int argc, char *argv[])
if (pwm_dev == RT_NULL)
{
rt_kprintf("pwm sample run failed! can't find %s device!\n", PWM_DEV_NAME);
return RT_ERROR;
return -RT_ERROR;
}
rt_pwm_set(pwm_dev, PWM_DEV_CHANNEL, period, pulse);

20
bsp/nrf5x/libraries/drivers/drv_spi.c
View File

@ -143,7 +143,7 @@ nrfx_spim_evt_handler_t spi_handler[] = {spi0_handler, spi1_handler, spi2_handle
* @brief This function config spi bus
* @param device
* @param configuration
* @retval RT_EOK / RT_ERROR
* @retval RT_EOK / -RT_ERROR
*/
static rt_err_t spi_configure(struct rt_spi_device *device,
struct rt_spi_configuration *configuration)
@ -191,7 +191,7 @@ static rt_err_t spi_configure(struct rt_spi_device *device,
break;
default:
LOG_E("spi_configure mode error %x\n",configuration->mode);
return RT_ERROR;
return -RT_ERROR;
}
/* spi frequency config */
switch (configuration->max_hz / 1000)
@ -229,7 +229,7 @@ static rt_err_t spi_configure(struct rt_spi_device *device,
if(NRFX_SUCCESS == nrf_ret)
return RT_EOK;
return RT_ERROR;
return -RT_ERROR;
}
static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message *message)
@ -288,7 +288,7 @@ static const struct rt_spi_ops nrfx_spi_ops =
/*spi bus init*/
static int rt_hw_spi_bus_init(void)
{
rt_err_t result = RT_ERROR;
rt_err_t result = -RT_ERROR;
for (int i = 0; i < sizeof(spi_config) / sizeof(spi_config[0]); i++)
{
spi_bus_obj[i].spi = spi_config[i].spi;
@ -324,7 +324,7 @@ rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name,
if (result != RT_EOK)
{
LOG_E("%s attach to %s faild, %d", device_name, bus_name, result);
result = RT_ERROR;
result = -RT_ERROR;
}
RT_ASSERT(result == RT_EOK);
return result;
@ -453,7 +453,7 @@ nrfx_spi_evt_handler_t spi_handler[] = {spi0_handler, spi1_handler, spi2_handler
* @brief This function config spi bus
* @param device
* @param configuration
* @retval RT_EOK / RT_ERROR
* @retval RT_EOK / -RT_ERROR
*/
static rt_err_t spi_configure(struct rt_spi_device *device,
struct rt_spi_configuration *configuration)
@ -501,7 +501,7 @@ static rt_err_t spi_configure(struct rt_spi_device *device,
break;
default:
LOG_E("spi_configure mode error %x\n",configuration->mode);
return RT_ERROR;
return -RT_ERROR;
}
/* spi frequency config */
switch (configuration->max_hz / 1000)
@ -539,7 +539,7 @@ static rt_err_t spi_configure(struct rt_spi_device *device,
if(NRFX_SUCCESS == nrf_ret)
return RT_EOK;
return RT_ERROR;
return -RT_ERROR;
}
static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message *message)
@ -598,7 +598,7 @@ static const struct rt_spi_ops nrfx_spi_ops =
/*spi bus init*/
static int rt_hw_spi_bus_init(void)
{
rt_err_t result = RT_ERROR;
rt_err_t result = -RT_ERROR;
for (int i = 0; i < sizeof(spi_config) / sizeof(spi_config[0]); i++)
{
spi_bus_obj[i].spi = spi_config[i].spi;
@ -634,7 +634,7 @@ rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name,
if (result != RT_EOK)
{
LOG_E("%s attach to %s faild, %d", device_name, bus_name, result);
result = RT_ERROR;
result = -RT_ERROR;
}
RT_ASSERT(result == RT_EOK);
return result;

4
bsp/nrf5x/libraries/drivers/drv_spi.h
View File

@ -25,7 +25,7 @@
* @param bus_name spi bus name "spi0"/"spi1"/"spi2"
* @param device_name spi device name "spi0x"/"spi1x"/"spi2x"
* @param ss_pin spi ss pin number
* @retval RT_ERROR / RT_EOK
* @retval -RT_ERROR / RT_EOK
*/
rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name, rt_uint32_t ss_pin);
@ -97,7 +97,7 @@ struct nrfx_drv_spi_pin_config
* @param bus_name spi bus name "spi0"/"spi1"/"spi2"
* @param device_name spi device name "spi0x"/"spi1x"/"spi2x"
* @param ss_pin spi ss pin number
* @retval RT_ERROR / RT_EOK
* @retval -RT_ERROR / RT_EOK
*/
rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name, rt_uint32_t ss_pin);

2
bsp/nrf5x/libraries/drivers/drv_uart.c
View File

@ -161,7 +161,7 @@ static rt_err_t _uart_ctrl(struct rt_serial_device *serial, int cmd, void *arg)
break;
default:
return RT_ERROR;
return -RT_ERROR;
}
return RT_EOK;

2
bsp/nuclei/libraries/gd32vf103/HAL_Drivers/drv_i2c.c
View File

@ -123,7 +123,7 @@ static rt_ssize_t gd32_i2c_xfer(struct rt_i2c_bus_device *device, struct rt_i2c_
{
struct rt_i2c_msg *msg;
rt_uint32_t i;
rt_err_t ret = RT_ERROR;
rt_err_t ret = -RT_ERROR;
rt_uint16_t last_flags;
RT_ASSERT(device != RT_NULL);

2
bsp/nuvoton/libraries/m031/rtt_port/drv_adc.c
View File

@ -134,7 +134,7 @@ static rt_err_t nu_get_adc_value(struct rt_adc_device *device, rt_uint32_t chann
int rt_hw_adc_init(void)
{
rt_err_t result = RT_ERROR;
rt_err_t result = -RT_ERROR;
int nu_sel = 0;
while (nu_adc_arr[nu_sel].name != 0)

6
bsp/nuvoton/libraries/m031/rtt_port/drv_bpwm_capture.c
View File

@ -179,7 +179,7 @@ static rt_err_t nu_capture_get_pulsewidth(struct rt_inputcapture_device *inputca
}
else
{
ret = RT_ERROR;
ret = -RT_ERROR;
}
return -(ret);
}
@ -201,7 +201,7 @@ static void bpwm_config(nu_capture_t *nu_capture)
static rt_err_t nu_bpwm_init(nu_capture_t *nu_capture)
{
rt_err_t ret = RT_ERROR;
rt_err_t ret = -RT_ERROR;
static rt_bool_t bBPWM0Inited = RT_FALSE;
static rt_bool_t bBPWM1Inited = RT_FALSE;
@ -249,7 +249,7 @@ static rt_err_t nu_capture_init(struct rt_inputcapture_device *inputcapture)
if (nu_bpwm_init(nu_capture) != RT_EOK)
{
rt_kprintf("Failed to initialize BPWM.\n");
ret = RT_ERROR;
ret = -RT_ERROR;
}
return -(ret);

2
bsp/nuvoton/libraries/m031/rtt_port/drv_gpio.c
View File

@ -239,7 +239,7 @@ static rt_err_t nu_gpio_irq_enable(struct rt_device *device, rt_base_t pin, rt_u
irqindex = nu_find_irqindex(pin);
if (irqindex == -(RT_ERROR))
{
ret = RT_ERROR;
ret = -RT_ERROR;
goto exit_nu_gpio_irq_enable;
}

2
bsp/nuvoton/libraries/m031/rtt_port/drv_i2c.c
View File

@ -301,7 +301,7 @@ static rt_ssize_t nu_i2c_mst_xfer(struct rt_i2c_bus_device *bus,
/* Public functions -------------------------------------------------------------*/
int rt_hw_i2c_init(void)
{
rt_err_t ret = RT_ERROR;
rt_err_t ret = -RT_ERROR;
SYS_UnlockReg();

2
bsp/nuvoton/libraries/m031/rtt_port/drv_pdma.c
View File

@ -681,7 +681,7 @@ static rt_err_t nu_pdma_sgtbls_valid(nu_pdma_desc_t head)
{
rt_kprintf("The distance is over %d between 0x%08x and 0x%08x. \n", NU_PDMA_SG_LIMITED_DISTANCE, PDMA->SCATBA, node);
rt_kprintf("Please use nu_pdma_sgtbl_allocate to allocate valid sg-table.\n");
return RT_ERROR;
return -RT_ERROR;
}
node = (nu_pdma_desc_t)(node->NEXT + PDMA->SCATBA);

Some files were not shown because too many files have changed in this diff Show More