[bsp][w60x] 更新驱动，添加加解密及配网功能，增强稳定性。
1. 新增 crypto, onchip_Flash, soft_i2c 驱动 2. 新增 oneshot 配网功能 3. 完善 I2C, UART, SPI, WIFI 等基本驱动 4. 更新 Kconfig 配置，用户交互更加友好 5. 屏蔽 末尾 80 内存，无法作为栈使用。
This commit is contained in:
tangyuxin
parent
70cec89b58
commit
08656c3034
128
bsp/w60x/.config
128
bsp/w60x/.config
|
|
@ -131,47 +131,89 @@ CONFIG_RT_USING_SERIAL=y
|
||||||
CONFIG_RT_SERIAL_USING_DMA=y
|
CONFIG_RT_SERIAL_USING_DMA=y
|
||||||
CONFIG_RT_SERIAL_RB_BUFSZ=64
|
CONFIG_RT_SERIAL_RB_BUFSZ=64
|
||||||
# CONFIG_RT_USING_CAN is not set
|
# CONFIG_RT_USING_CAN is not set
|
||||||
# CONFIG_RT_USING_HWTIMER is not set
|
CONFIG_RT_USING_HWTIMER=y
|
||||||
# CONFIG_RT_USING_CPUTIME is not set
|
# CONFIG_RT_USING_CPUTIME is not set
|
||||||
# CONFIG_RT_USING_I2C is not set
|
CONFIG_RT_USING_I2C=y
|
||||||
|
CONFIG_RT_USING_I2C_BITOPS=y
|
||||||
CONFIG_RT_USING_PIN=y
|
CONFIG_RT_USING_PIN=y
|
||||||
# CONFIG_RT_USING_ADC is not set
|
# CONFIG_RT_USING_ADC is not set
|
||||||
# CONFIG_RT_USING_PWM is not set
|
CONFIG_RT_USING_PWM=y
|
||||||
# CONFIG_RT_USING_MTD_NOR is not set
|
# CONFIG_RT_USING_MTD_NOR is not set
|
||||||
# CONFIG_RT_USING_MTD_NAND is not set
|
# CONFIG_RT_USING_MTD_NAND is not set
|
||||||
# CONFIG_RT_USING_MTD is not set
|
|
||||||
# CONFIG_RT_USING_PM is not set
|
# CONFIG_RT_USING_PM is not set
|
||||||
# CONFIG_RT_USING_RTC is not set
|
CONFIG_RT_USING_RTC=y
|
||||||
|
# CONFIG_RT_USING_ALARM is not set
|
||||||
|
CONFIG_RT_USING_SOFT_RTC=y
|
||||||
|
CONFIG_RTC_SYNC_USING_NTP=y
|
||||||
|
CONFIG_RTC_NTP_FIRST_SYNC_DELAY=30
|
||||||
|
CONFIG_RTC_NTP_SYNC_PERIOD=3600
|
||||||
# CONFIG_RT_USING_SDIO is not set
|
# CONFIG_RT_USING_SDIO is not set
|
||||||
# CONFIG_RT_USING_SPI is not set
|
CONFIG_RT_USING_SPI=y
|
||||||
# CONFIG_RT_USING_WDT is not set
|
# CONFIG_RT_USING_QSPI is not set
|
||||||
|
# CONFIG_RT_USING_SPI_MSD is not set
|
||||||
|
# CONFIG_RT_USING_SFUD is not set
|
||||||
|
# CONFIG_RT_USING_ENC28J60 is not set
|
||||||
|
# CONFIG_RT_USING_SPI_WIFI is not set
|
||||||
|
CONFIG_RT_USING_WDT=y
|
||||||
# CONFIG_RT_USING_AUDIO is not set
|
# CONFIG_RT_USING_AUDIO is not set
|
||||||
# CONFIG_RT_USING_SENSOR is not set
|
# CONFIG_RT_USING_SENSOR is not set
|
||||||
# CONFIG_RT_USING_TOUCH is not set
|
# CONFIG_RT_USING_TOUCH is not set
|
||||||
|
CONFIG_RT_USING_HWCRYPTO=y
|
||||||
#
|
CONFIG_RT_HWCRYPTO_DEFAULT_NAME="hwcryto"
|
||||||
# Using Hardware Crypto drivers
|
CONFIG_RT_HWCRYPTO_IV_MAX_SIZE=16
|
||||||
#
|
CONFIG_RT_HWCRYPTO_KEYBIT_MAX_SIZE=256
|
||||||
# CONFIG_RT_USING_HWCRYPTO is not set
|
# CONFIG_RT_HWCRYPTO_USING_GCM is not set
|
||||||
|
CONFIG_RT_HWCRYPTO_USING_AES=y
|
||||||
#
|
CONFIG_RT_HWCRYPTO_USING_AES_ECB=y
|
||||||
# Using WiFi
|
CONFIG_RT_HWCRYPTO_USING_AES_CBC=y
|
||||||
#
|
# CONFIG_RT_HWCRYPTO_USING_AES_CFB is not set
|
||||||
|
# CONFIG_RT_HWCRYPTO_USING_AES_CTR is not set
|
||||||
|
# CONFIG_RT_HWCRYPTO_USING_AES_OFB is not set
|
||||||
|
# CONFIG_RT_HWCRYPTO_USING_DES is not set
|
||||||
|
# CONFIG_RT_HWCRYPTO_USING_3DES is not set
|
||||||
|
# CONFIG_RT_HWCRYPTO_USING_RC4 is not set
|
||||||
|
CONFIG_RT_HWCRYPTO_USING_MD5=y
|
||||||
|
CONFIG_RT_HWCRYPTO_USING_SHA1=y
|
||||||
|
# CONFIG_RT_HWCRYPTO_USING_SHA2 is not set
|
||||||
|
CONFIG_RT_HWCRYPTO_USING_RNG=y
|
||||||
|
CONFIG_RT_HWCRYPTO_USING_CRC=y
|
||||||
|
CONFIG_RT_HWCRYPTO_USING_CRC_07=y
|
||||||
|
CONFIG_RT_HWCRYPTO_USING_CRC_8005=y
|
||||||
|
CONFIG_RT_HWCRYPTO_USING_CRC_1021=y
|
||||||
|
# CONFIG_RT_HWCRYPTO_USING_CRC_3D65 is not set
|
||||||
|
CONFIG_RT_HWCRYPTO_USING_CRC_04C11DB7=y
|
||||||
|
CONFIG_RT_HWCRYPTO_USING_BIGNUM=y
|
||||||
|
CONFIG_RT_HWCRYPTO_USING_BIGNUM_EXPTMOD=y
|
||||||
|
CONFIG_RT_HWCRYPTO_USING_BIGNUM_MULMOD=y
|
||||||
|
# CONFIG_RT_HWCRYPTO_USING_BIGNUM_MUL is not set
|
||||||
|
# CONFIG_RT_HWCRYPTO_USING_BIGNUM_ADD is not set
|
||||||
|
# CONFIG_RT_HWCRYPTO_USING_BIGNUM_SUB is not set
|
||||||
CONFIG_RT_USING_WIFI=y
|
CONFIG_RT_USING_WIFI=y
|
||||||
CONFIG_RT_WLAN_DEVICE_STA_NAME="wlan0"
|
CONFIG_RT_WLAN_DEVICE_STA_NAME="wlan0"
|
||||||
CONFIG_RT_WLAN_DEVICE_AP_NAME="wlan1"
|
CONFIG_RT_WLAN_DEVICE_AP_NAME="wlan1"
|
||||||
CONFIG_RT_WLAN_DEFAULT_PROT="lwip"
|
|
||||||
CONFIG_RT_WLAN_SCAN_WAIT_MS=10000
|
|
||||||
CONFIG_RT_WLAN_CONNECT_WAIT_MS=10000
|
|
||||||
CONFIG_RT_WLAN_SSID_MAX_LENGTH=32
|
CONFIG_RT_WLAN_SSID_MAX_LENGTH=32
|
||||||
CONFIG_RT_WLAN_PASSWORD_MAX_LENGTH=32
|
CONFIG_RT_WLAN_PASSWORD_MAX_LENGTH=32
|
||||||
|
CONFIG_RT_WLAN_DEV_EVENT_NUM=2
|
||||||
|
CONFIG_RT_WLAN_MANAGE_ENABLE=y
|
||||||
|
CONFIG_RT_WLAN_SCAN_WAIT_MS=10000
|
||||||
|
CONFIG_RT_WLAN_CONNECT_WAIT_MS=10000
|
||||||
CONFIG_RT_WLAN_SCAN_SORT=y
|
CONFIG_RT_WLAN_SCAN_SORT=y
|
||||||
|
CONFIG_RT_WLAN_MSH_CMD_ENABLE=y
|
||||||
|
CONFIG_RT_WLAN_AUTO_CONNECT_ENABLE=y
|
||||||
|
CONFIG_AUTO_CONNECTION_PERIOD_MS=2000
|
||||||
|
CONFIG_RT_WLAN_CFG_ENABLE=y
|
||||||
CONFIG_RT_WLAN_CFG_INFO_MAX=3
|
CONFIG_RT_WLAN_CFG_INFO_MAX=3
|
||||||
|
CONFIG_RT_WLAN_PROT_ENABLE=y
|
||||||
|
CONFIG_RT_WLAN_PROT_NAME_LEN=8
|
||||||
|
CONFIG_RT_WLAN_PROT_MAX=2
|
||||||
|
CONFIG_RT_WLAN_DEFAULT_PROT="lwip"
|
||||||
|
CONFIG_RT_WLAN_PROT_LWIP_ENABLE=y
|
||||||
|
CONFIG_RT_WLAN_PROT_LWIP_NAME="lwip"
|
||||||
|
# CONFIG_RT_WLAN_PROT_LWIP_PBUF_FORCE is not set
|
||||||
|
CONFIG_RT_WLAN_WORK_THREAD_ENABLE=y
|
||||||
CONFIG_RT_WLAN_WORKQUEUE_THREAD_NAME="wlan_job"
|
CONFIG_RT_WLAN_WORKQUEUE_THREAD_NAME="wlan_job"
|
||||||
CONFIG_RT_WLAN_WORKQUEUE_THREAD_SIZE=2048
|
CONFIG_RT_WLAN_WORKQUEUE_THREAD_SIZE=2048
|
||||||
CONFIG_RT_WLAN_WORKQUEUE_THREAD_PRIO=22
|
CONFIG_RT_WLAN_WORKQUEUE_THREAD_PRIO=22
|
||||||
CONFIG_RT_WLAN_DEV_EVENT_NUM=2
|
|
||||||
# CONFIG_RT_WLAN_PROT_LWIP_PBUF_FORCE is not set
|
|
||||||
# CONFIG_RT_WLAN_DEBUG is not set
|
# CONFIG_RT_WLAN_DEBUG is not set
|
||||||
|
|
||||||
#
|
#
|
||||||
|
|
@ -275,11 +317,6 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
|
||||||
CONFIG_RT_LWIP_USING_PING=y
|
CONFIG_RT_LWIP_USING_PING=y
|
||||||
# CONFIG_RT_LWIP_DEBUG is not set
|
# CONFIG_RT_LWIP_DEBUG is not set
|
||||||
|
|
||||||
#
|
|
||||||
# Modbus master and slave stack
|
|
||||||
#
|
|
||||||
# CONFIG_RT_USING_MODBUS is not set
|
|
||||||
|
|
||||||
#
|
#
|
||||||
# AT commands
|
# AT commands
|
||||||
#
|
#
|
||||||
|
|
@ -340,6 +377,7 @@ CONFIG_ULOG_BACKEND_USING_CONSOLE=y
|
||||||
# CONFIG_PKG_USING_CJSON is not set
|
# CONFIG_PKG_USING_CJSON is not set
|
||||||
# CONFIG_PKG_USING_JSMN is not set
|
# CONFIG_PKG_USING_JSMN is not set
|
||||||
# CONFIG_PKG_USING_LIBMODBUS is not set
|
# CONFIG_PKG_USING_LIBMODBUS is not set
|
||||||
|
# CONFIG_PKG_USING_FREEMODBUS is not set
|
||||||
# CONFIG_PKG_USING_LJSON is not set
|
# CONFIG_PKG_USING_LJSON is not set
|
||||||
# CONFIG_PKG_USING_EZXML is not set
|
# CONFIG_PKG_USING_EZXML is not set
|
||||||
# CONFIG_PKG_USING_NANOPB is not set
|
# CONFIG_PKG_USING_NANOPB is not set
|
||||||
|
|
@ -360,7 +398,22 @@ CONFIG_ULOG_BACKEND_USING_CONSOLE=y
|
||||||
# CONFIG_PKG_USING_RW007 is not set
|
# CONFIG_PKG_USING_RW007 is not set
|
||||||
# CONFIG_PKG_USING_COAP is not set
|
# CONFIG_PKG_USING_COAP is not set
|
||||||
# CONFIG_PKG_USING_NOPOLL is not set
|
# CONFIG_PKG_USING_NOPOLL is not set
|
||||||
# CONFIG_PKG_USING_NETUTILS is not set
|
CONFIG_PKG_USING_NETUTILS=y
|
||||||
|
CONFIG_PKG_NETUTILS_PATH="/packages/iot/netutils"
|
||||||
|
# CONFIG_PKG_NETUTILS_TFTP is not set
|
||||||
|
# CONFIG_PKG_NETUTILS_IPERF is not set
|
||||||
|
# CONFIG_PKG_NETUTILS_NETIO is not set
|
||||||
|
CONFIG_PKG_NETUTILS_NTP=y
|
||||||
|
CONFIG_NETUTILS_NTP_TIMEZONE=8
|
||||||
|
CONFIG_NETUTILS_NTP_HOSTNAME="cn.ntp.org.cn"
|
||||||
|
CONFIG_NETUTILS_NTP_HOSTNAME2="ntp.rt-thread.org"
|
||||||
|
CONFIG_NETUTILS_NTP_HOSTNAME3="edu.ntp.org.cn"
|
||||||
|
# CONFIG_PKG_NETUTILS_TELNET is not set
|
||||||
|
# CONFIG_PKG_NETUTILS_TCPDUMP is not set
|
||||||
|
CONFIG_PKG_USING_NETUTILS_V110=y
|
||||||
|
# CONFIG_PKG_USING_NETUTILS_V100 is not set
|
||||||
|
# CONFIG_PKG_USING_NETUTILS_LATEST_VERSION is not set
|
||||||
|
CONFIG_PKG_NETUTILS_VER="v1.1.0"
|
||||||
# CONFIG_PKG_USING_AT_DEVICE is not set
|
# CONFIG_PKG_USING_AT_DEVICE is not set
|
||||||
# CONFIG_PKG_USING_ATSRV_SOCKET is not set
|
# CONFIG_PKG_USING_ATSRV_SOCKET is not set
|
||||||
# CONFIG_PKG_USING_WIZNET is not set
|
# CONFIG_PKG_USING_WIZNET is not set
|
||||||
|
|
@ -379,6 +432,9 @@ CONFIG_ULOG_BACKEND_USING_CONSOLE=y
|
||||||
# CONFIG_PKG_USING_LSSDP is not set
|
# CONFIG_PKG_USING_LSSDP is not set
|
||||||
# CONFIG_PKG_USING_AIRKISS_OPEN is not set
|
# CONFIG_PKG_USING_AIRKISS_OPEN is not set
|
||||||
# CONFIG_PKG_USING_LIBRWS is not set
|
# CONFIG_PKG_USING_LIBRWS is not set
|
||||||
|
# CONFIG_PKG_USING_TCPSERVER is not set
|
||||||
|
# CONFIG_PKG_USING_PROTOBUF_C is not set
|
||||||
|
# CONFIG_PKG_USING_ONNX_PARSER is not set
|
||||||
|
|
||||||
#
|
#
|
||||||
# security packages
|
# security packages
|
||||||
|
|
@ -400,6 +456,7 @@ CONFIG_ULOG_BACKEND_USING_CONSOLE=y
|
||||||
# CONFIG_PKG_USING_OPENMV is not set
|
# CONFIG_PKG_USING_OPENMV is not set
|
||||||
# CONFIG_PKG_USING_MUPDF is not set
|
# CONFIG_PKG_USING_MUPDF is not set
|
||||||
# CONFIG_PKG_USING_STEMWIN is not set
|
# CONFIG_PKG_USING_STEMWIN is not set
|
||||||
|
# CONFIG_PKG_USING_WAVPLAYER is not set
|
||||||
|
|
||||||
#
|
#
|
||||||
# tools packages
|
# tools packages
|
||||||
|
|
@ -429,6 +486,7 @@ CONFIG_ULOG_BACKEND_USING_CONSOLE=y
|
||||||
# CONFIG_PKG_USING_DFS_YAFFS is not set
|
# CONFIG_PKG_USING_DFS_YAFFS is not set
|
||||||
# CONFIG_PKG_USING_LITTLEFS is not set
|
# CONFIG_PKG_USING_LITTLEFS is not set
|
||||||
# CONFIG_PKG_USING_THREAD_POOL is not set
|
# CONFIG_PKG_USING_THREAD_POOL is not set
|
||||||
|
# CONFIG_PKG_USING_ROBOTS is not set
|
||||||
|
|
||||||
#
|
#
|
||||||
# peripheral libraries and drivers
|
# peripheral libraries and drivers
|
||||||
|
|
@ -459,6 +517,7 @@ CONFIG_PKG_WM_LIBRARIES_VER="latest"
|
||||||
# CONFIG_PKG_USING_I2C_TOOLS is not set
|
# CONFIG_PKG_USING_I2C_TOOLS is not set
|
||||||
# CONFIG_PKG_USING_NRF24L01 is not set
|
# CONFIG_PKG_USING_NRF24L01 is not set
|
||||||
# CONFIG_PKG_USING_TOUCH_DRIVERS is not set
|
# CONFIG_PKG_USING_TOUCH_DRIVERS is not set
|
||||||
|
# CONFIG_PKG_USING_LCD_DRIVERS is not set
|
||||||
|
|
||||||
#
|
#
|
||||||
# miscellaneous packages
|
# miscellaneous packages
|
||||||
|
|
@ -486,6 +545,7 @@ CONFIG_PKG_WM_LIBRARIES_VER="latest"
|
||||||
# CONFIG_PKG_USING_HELLO is not set
|
# CONFIG_PKG_USING_HELLO is not set
|
||||||
# CONFIG_PKG_USING_VI is not set
|
# CONFIG_PKG_USING_VI is not set
|
||||||
# CONFIG_PKG_USING_NNOM is not set
|
# CONFIG_PKG_USING_NNOM is not set
|
||||||
|
# CONFIG_PKG_USING_LIBANN is not set
|
||||||
|
|
||||||
#
|
#
|
||||||
# Env config
|
# Env config
|
||||||
|
|
@ -500,10 +560,8 @@ CONFIG_BSP_USING_WM_LIBRARIES=y
|
||||||
#
|
#
|
||||||
CONFIG_SOC_W600_A8xx=y
|
CONFIG_SOC_W600_A8xx=y
|
||||||
# CONFIG_SOC_W601_A8xx is not set
|
# CONFIG_SOC_W601_A8xx is not set
|
||||||
|
CONFIG_W600_EV_BOARD=y
|
||||||
#
|
# CONFIG_W60X_CUSTOM_BOARD is not set
|
||||||
# Hardware Drivers Config
|
|
||||||
#
|
|
||||||
|
|
||||||
#
|
#
|
||||||
# On-chip Peripheral Drivers
|
# On-chip Peripheral Drivers
|
||||||
|
|
@ -511,18 +569,20 @@ CONFIG_SOC_W600_A8xx=y
|
||||||
CONFIG_BSP_USING_UART=y
|
CONFIG_BSP_USING_UART=y
|
||||||
CONFIG_BSP_USING_UART0=y
|
CONFIG_BSP_USING_UART0=y
|
||||||
# CONFIG_BSP_USING_UART1 is not set
|
# CONFIG_BSP_USING_UART1 is not set
|
||||||
# CONFIG_BSP_USING_UART2 is not set
|
|
||||||
CONFIG_BSP_USING_PIN=y
|
CONFIG_BSP_USING_PIN=y
|
||||||
CONFIG_BSP_USING_WIFI=y
|
CONFIG_BSP_USING_WIFI=y
|
||||||
# CONFIG_BSP_USING_HWTIMER is not set
|
# CONFIG_BSP_USING_HWTIMER is not set
|
||||||
# CONFIG_BSP_USING_PWM is not set
|
# CONFIG_BSP_USING_PWM is not set
|
||||||
# CONFIG_BSP_USING_I2C is not set
|
# CONFIG_BSP_USING_I2C is not set
|
||||||
|
# CONFIG_BSP_USING_SOFT_I2C is not set
|
||||||
# CONFIG_BSP_USING_SPI is not set
|
# CONFIG_BSP_USING_SPI is not set
|
||||||
# CONFIG_BSP_USING_WDT is not set
|
# CONFIG_BSP_USING_WDT is not set
|
||||||
# CONFIG_BSP_USING_RTC is not set
|
# CONFIG_BSP_USING_RTC is not set
|
||||||
|
# CONFIG_BSP_USING_CRYPTO is not set
|
||||||
# CONFIG_BSP_USING_STANDBY is not set
|
# CONFIG_BSP_USING_STANDBY is not set
|
||||||
|
|
||||||
#
|
#
|
||||||
# Offboard Peripheral Drivers
|
# External Libraries
|
||||||
#
|
#
|
||||||
# CONFIG_BSP_USING_FLASH is not set
|
CONFIG_WM_USING_ONESHOT=y
|
||||||
|
# CONFIG_WM_USING_ONESHOT_DEMO is not set
|
||||||
|
|
|
||||||
|
|
@ -13,15 +13,15 @@ W60X 芯片是[联盛德微电子](http://www.winnermicro.com)推出的一款嵌
|
||||||
| UART | 支持 | UART0/UART1/UART2 |
|
| UART | 支持 | UART0/UART1/UART2 |
|
||||||
| GPIO | 支持 | 自动根据芯片型号选择引脚布局 |
|
| GPIO | 支持 | 自动根据芯片型号选择引脚布局 |
|
||||||
| SPI | 支持 | 低速 SPI，支持 SPI BUS，8/32bit 主机模式 |
|
| SPI | 支持 | 低速 SPI，支持 SPI BUS，8/32bit 主机模式 |
|
||||||
| SPI Flash | 支持 | 支持 W25QXX、SFUD |
|
|
||||||
| WDT | 支持 | 支持 |
|
| WDT | 支持 | 支持 |
|
||||||
| I2C | 支持 | 硬件 I2C |
|
| I2C | 支持 | 硬件 I2C 和 软件 I2C |
|
||||||
| RTC | 支持 | 支持 ntp 同步、支持 Alarm |
|
| RTC | 支持 | 支持 ntp 同步、支持 Alarm |
|
||||||
| ADC | 支持 | 8 channel ADC 采集 CPU 温度采集（W601 支持） |
|
| ADC | 支持 | 8 channel ADC 采集 CPU 温度采集（W601 支持） |
|
||||||
| PWM | 支持 | 5 channel PWM 输出 |
|
| PWM | 支持 | 5 channel PWM 输出 |
|
||||||
| Timer | 支持 | 5个Timers 独立工作 |
|
| Timer | 支持 | 5个Timers 独立工作 |
|
||||||
| WiFi | 支持 | 支持 IEEE802.11b/g/n，支持 sta、ap、ap+sta 模式 |
|
| Crypto | 支持 | 支持硬件 AES/DES/3DES/RC/SHA1/MD3/CRC 加解密算法|
|
||||||
| 低功耗 | 支持 | 支持 WiFi 协议节电，支持 standby 深度节电 |
|
| WiFi | 支持 | 支持 IEEE802.11b/g/n，支持 sta、ap、ap+sta 模式 |
|
||||||
|
| 低功耗 | 支持 | 支持 WiFi 协议节电，支持 standby 深度节电 |
|
||||||
|
|
||||||
## 使用说明
|
## 使用说明
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -4,30 +4,43 @@ config BSP_USING_WM_LIBRARIES
|
||||||
select PKG_USING_WM_LIBRARIES
|
select PKG_USING_WM_LIBRARIES
|
||||||
default y
|
default y
|
||||||
|
|
||||||
|
|
||||||
menu "W60x Device config"
|
menu "W60x Device config"
|
||||||
choice
|
choice
|
||||||
prompt "Device type"
|
prompt "SOC type"
|
||||||
default SOC_W600-A8xx
|
default SOC_W600_A8xx
|
||||||
config SOC_W600_A8xx
|
config SOC_W600_A8xx
|
||||||
bool "W600-A8xx"
|
bool "W600-A8xx"
|
||||||
config SOC_W601_A8xx
|
config SOC_W601_A8xx
|
||||||
bool "W601-A8xx"
|
bool "W601-A8xx"
|
||||||
endchoice
|
endchoice
|
||||||
|
|
||||||
|
choice
|
||||||
|
prompt "Board type"
|
||||||
|
if SOC_W600_A8xx
|
||||||
|
config W600_EV_BOARD
|
||||||
|
bool "W600_EV BOARD"
|
||||||
|
endif
|
||||||
|
if SOC_W601_A8xx
|
||||||
|
config W601_IOT_BOARD
|
||||||
|
bool "W601 IoT Board"
|
||||||
|
endif
|
||||||
|
config W60X_CUSTOM_BOARD
|
||||||
|
bool "Custom Board"
|
||||||
|
endchoice
|
||||||
endmenu
|
endmenu
|
||||||
|
|
||||||
menu "Hardware Drivers Config"
|
menu "On-chip Peripheral Drivers"
|
||||||
menu "On-chip Peripheral Drivers"
|
menuconfig BSP_USING_UART
|
||||||
menuconfig BSP_USING_UART
|
bool "Using UART"
|
||||||
bool "Using UART"
|
select RT_USING_SERIAL
|
||||||
select RT_USING_SERIAL
|
default y
|
||||||
|
|
||||||
|
if BSP_USING_UART
|
||||||
|
config BSP_USING_UART0
|
||||||
|
bool "Enabel UART 0"
|
||||||
default y
|
default y
|
||||||
|
|
||||||
if BSP_USING_UART
|
if W600_EV_BOARD || W60X_CUSTOM_BOARD
|
||||||
config BSP_USING_UART0
|
|
||||||
bool "Enabel UART 0"
|
|
||||||
default y
|
|
||||||
|
|
||||||
config BSP_USING_UART1
|
config BSP_USING_UART1
|
||||||
bool "Enabel UART 1"
|
bool "Enabel UART 1"
|
||||||
default n
|
default n
|
||||||
|
|
@ -36,14 +49,10 @@ menu "Hardware Drivers Config"
|
||||||
config WM_UART1_BAUDRATE
|
config WM_UART1_BAUDRATE
|
||||||
int "UART1 baudrate"
|
int "UART1 baudrate"
|
||||||
default 115200
|
default 115200
|
||||||
config WM_UART1_RX_PIN
|
|
||||||
int "UART1 RX pin number"
|
|
||||||
default 31
|
|
||||||
config WM_UART1_TX_PIN
|
|
||||||
int "UART1 TX pin number"
|
|
||||||
default 32
|
|
||||||
endif
|
endif
|
||||||
|
endif
|
||||||
|
|
||||||
|
if W601_IOT_BOARD || W60X_CUSTOM_BOARD
|
||||||
config BSP_USING_UART2
|
config BSP_USING_UART2
|
||||||
bool "Enabel UART 2"
|
bool "Enabel UART 2"
|
||||||
default n
|
default n
|
||||||
|
|
@ -52,192 +61,208 @@ menu "Hardware Drivers Config"
|
||||||
config WM_UART2_BAUDRATE
|
config WM_UART2_BAUDRATE
|
||||||
int "UART2 baudrate"
|
int "UART2 baudrate"
|
||||||
default 115200
|
default 115200
|
||||||
config WM_UART2_RX_PIN
|
|
||||||
int "UART2 RX pin number"
|
|
||||||
default 13
|
|
||||||
config WM_UART2_TX_PIN
|
|
||||||
int "UART2 TX pin number"
|
|
||||||
default 14
|
|
||||||
endif
|
endif
|
||||||
endif
|
endif
|
||||||
|
|
||||||
config BSP_USING_PIN
|
|
||||||
bool "Using PIN"
|
|
||||||
select RT_USING_PIN
|
|
||||||
default y
|
|
||||||
|
|
||||||
config BSP_USING_WIFI
|
|
||||||
bool "Using WIFI"
|
|
||||||
select RT_USING_WIFI
|
|
||||||
select RT_USING_LWIP
|
|
||||||
default y
|
|
||||||
|
|
||||||
if SOC_W601_A8xx
|
|
||||||
menuconfig BSP_USING_ADC
|
|
||||||
bool "Enable ADC"
|
|
||||||
select RT_USING_ADC
|
|
||||||
default n
|
|
||||||
|
|
||||||
if BSP_USING_ADC
|
|
||||||
config USING_CPU_TEMP
|
|
||||||
bool "Enable CPU Temperature"
|
|
||||||
config USING_ADC_CH1
|
|
||||||
bool "Enable ADC Channel 1"
|
|
||||||
config USING_ADC_CH2
|
|
||||||
bool "Enable ADC Channel 2"
|
|
||||||
config USING_ADC_CH3
|
|
||||||
bool "Enable ADC Channel 3"
|
|
||||||
config USING_ADC_CH4
|
|
||||||
bool "Enable ADC Channel 4"
|
|
||||||
config USING_ADC_CH5
|
|
||||||
bool "Enable ADC Channel 5"
|
|
||||||
config USING_ADC_CH6
|
|
||||||
bool "Enable ADC Channel 6"
|
|
||||||
config USING_ADC_CH7
|
|
||||||
bool "Enable ADC Channel 7"
|
|
||||||
config USING_ADC_CH8
|
|
||||||
bool "Enable ADC Channel 8"
|
|
||||||
endif
|
|
||||||
endif
|
endif
|
||||||
|
|
||||||
menuconfig BSP_USING_HWTIMER
|
config BSP_USING_PIN
|
||||||
bool "Enable HWTIMER"
|
bool "Using PIN"
|
||||||
select RT_USING_HWTIMER
|
select RT_USING_PIN
|
||||||
|
default y
|
||||||
|
|
||||||
|
config BSP_USING_WIFI
|
||||||
|
bool "Using WIFI"
|
||||||
|
select RT_USING_WIFI
|
||||||
|
select RT_USING_LWIP
|
||||||
|
select PKG_USING_NETUTILS
|
||||||
|
select PKG_NETUTILS_NTP
|
||||||
|
select RT_USING_RTC
|
||||||
|
select RT_USING_SOFT_RTC if !BSP_USING_RTC
|
||||||
|
default y
|
||||||
|
|
||||||
|
if SOC_W601_A8xx
|
||||||
|
menuconfig BSP_USING_ADC
|
||||||
|
bool "Enable ADC"
|
||||||
|
select RT_USING_ADC
|
||||||
default n
|
default n
|
||||||
|
|
||||||
if BSP_USING_HWTIMER
|
if BSP_USING_ADC
|
||||||
config USING_HW_TIMER1
|
config USING_CPU_TEMP
|
||||||
bool "Enable hw timer1"
|
bool "Enable CPU Temperature"
|
||||||
config USING_HW_TIMER2
|
config USING_ADC_CH1
|
||||||
bool "Enable hw timer2"
|
bool "Enable ADC Channel 1"
|
||||||
config USING_HW_TIMER3
|
config USING_ADC_CH2
|
||||||
bool "Enable hw timer3"
|
bool "Enable ADC Channel 2"
|
||||||
config USING_HW_TIMER4
|
config USING_ADC_CH3
|
||||||
bool "Enable hw timer4"
|
bool "Enable ADC Channel 3"
|
||||||
config USING_HW_TIMER5
|
config USING_ADC_CH4
|
||||||
bool "Enable hw timer5"
|
bool "Enable ADC Channel 4"
|
||||||
|
config USING_ADC_CH5
|
||||||
|
bool "Enable ADC Channel 5"
|
||||||
|
config USING_ADC_CH6
|
||||||
|
bool "Enable ADC Channel 6"
|
||||||
|
config USING_ADC_CH7
|
||||||
|
bool "Enable ADC Channel 7"
|
||||||
|
config USING_ADC_CH8
|
||||||
|
bool "Enable ADC Channel 8"
|
||||||
endif
|
endif
|
||||||
|
endif
|
||||||
|
|
||||||
menuconfig BSP_USING_PWM
|
menuconfig BSP_USING_HWTIMER
|
||||||
bool "Enable PWM"
|
bool "Enable HWTIMER"
|
||||||
select RT_USING_PWM
|
select RT_USING_HWTIMER
|
||||||
|
default n
|
||||||
|
|
||||||
|
if BSP_USING_HWTIMER
|
||||||
|
config USING_HW_TIMER1
|
||||||
|
bool "Enable hw timer1"
|
||||||
|
config USING_HW_TIMER2
|
||||||
|
bool "Enable hw timer2"
|
||||||
|
config USING_HW_TIMER3
|
||||||
|
bool "Enable hw timer3"
|
||||||
|
config USING_HW_TIMER4
|
||||||
|
bool "Enable hw timer4"
|
||||||
|
config USING_HW_TIMER5
|
||||||
|
bool "Enable hw timer5"
|
||||||
|
endif
|
||||||
|
|
||||||
|
menuconfig BSP_USING_PWM
|
||||||
|
bool "Enable PWM"
|
||||||
|
select RT_USING_PWM
|
||||||
|
default n
|
||||||
|
|
||||||
|
if BSP_USING_PWM
|
||||||
|
config USING_PWM_CH1
|
||||||
|
bool "Enable pwm channel 1"
|
||||||
default n
|
default n
|
||||||
|
if USING_PWM_CH1
|
||||||
if BSP_USING_PWM
|
config WM_PWM_CH1_PIN
|
||||||
config USING_PWM_CH1
|
int "wm pwm channel 1 pin number"
|
||||||
bool "Enable pwm channel 1"
|
|
||||||
default n
|
|
||||||
if USING_PWM_CH1
|
|
||||||
config WM_PWM_CH1_PIN
|
|
||||||
int "wm pwm channel 1 pin number"
|
|
||||||
default 23
|
|
||||||
endif
|
|
||||||
config USING_PWM_CH2
|
|
||||||
bool "Enable pwm channel 2"
|
|
||||||
default n
|
|
||||||
if USING_PWM_CH2
|
|
||||||
config WM_PWM_CH2_PIN
|
|
||||||
int "wm pwm channel 2 pin number"
|
|
||||||
default 22
|
|
||||||
endif
|
|
||||||
config USING_PWM_CH3
|
|
||||||
bool "Enable pwm channel 3"
|
|
||||||
default n
|
|
||||||
if USING_PWM_CH3
|
|
||||||
config WM_PWM_CH3_PIN
|
|
||||||
int "wm pwm channel 3 pin number"
|
|
||||||
default 21
|
|
||||||
endif
|
|
||||||
config USING_PWM_CH4
|
|
||||||
bool "Enable pwm channel 4"
|
|
||||||
default n
|
|
||||||
if USING_PWM_CH4
|
|
||||||
config WM_PWM_CH4_PIN
|
|
||||||
int "wm pwm channel 4 pin number"
|
|
||||||
default 20
|
|
||||||
endif
|
|
||||||
config USING_PWM_CH5
|
|
||||||
bool "Enable pwm channel 5"
|
|
||||||
default n
|
|
||||||
if USING_PWM_CH5
|
|
||||||
config WM_PWM_CH5_PIN
|
|
||||||
int "wm pwm channel 5 pin number"
|
|
||||||
default 19
|
|
||||||
endif
|
|
||||||
endif
|
|
||||||
|
|
||||||
menuconfig BSP_USING_I2C
|
|
||||||
bool "Enable I2C"
|
|
||||||
select RT_USING_I2C
|
|
||||||
default n
|
|
||||||
|
|
||||||
if BSP_USING_I2C
|
|
||||||
config WM_HW_I2C_FREQ
|
|
||||||
int "wm hardware I2C frequency(HZ)"
|
|
||||||
default 200000
|
|
||||||
config WM_I2C_DAT_PIN
|
|
||||||
int "wm I2C DAT pin number"
|
|
||||||
default 19
|
|
||||||
config WM_I2C_SCL_PIN
|
|
||||||
int "wm I2C SCL pin number"
|
|
||||||
default 18
|
|
||||||
endif
|
|
||||||
|
|
||||||
menuconfig BSP_USING_SPI
|
|
||||||
bool "Enable SPI"
|
|
||||||
select RT_USING_SPI
|
|
||||||
default n
|
|
||||||
|
|
||||||
if BSP_USING_SPI
|
|
||||||
config WM_SPI_CK_PIN
|
|
||||||
int "wm SPI CK pin number"
|
|
||||||
default 21
|
|
||||||
config WM_SPI_DO_PIN
|
|
||||||
int "wm SPI DO pin number"
|
|
||||||
default 23
|
default 23
|
||||||
config WM_SPI_DI_PIN
|
endif
|
||||||
int "wm SPI DI pin number"
|
config USING_PWM_CH2
|
||||||
|
bool "Enable pwm channel 2"
|
||||||
|
default n
|
||||||
|
if USING_PWM_CH2
|
||||||
|
config WM_PWM_CH2_PIN
|
||||||
|
int "wm pwm channel 2 pin number"
|
||||||
default 22
|
default 22
|
||||||
endif
|
endif
|
||||||
|
config USING_PWM_CH3
|
||||||
config BSP_USING_WDT
|
bool "Enable pwm channel 3"
|
||||||
bool "Enable WDT"
|
|
||||||
select RT_USING_WDT
|
|
||||||
default n
|
default n
|
||||||
|
if USING_PWM_CH3
|
||||||
menuconfig BSP_USING_RTC
|
config WM_PWM_CH3_PIN
|
||||||
bool "Enable RTC"
|
int "wm pwm channel 3 pin number"
|
||||||
select RT_USING_RTC
|
default 21
|
||||||
|
endif
|
||||||
|
config USING_PWM_CH4
|
||||||
|
bool "Enable pwm channel 4"
|
||||||
default n
|
default n
|
||||||
|
if USING_PWM_CH4
|
||||||
|
config WM_PWM_CH4_PIN
|
||||||
|
int "wm pwm channel 4 pin number"
|
||||||
|
default 37
|
||||||
|
endif
|
||||||
|
config USING_PWM_CH5
|
||||||
|
bool "Enable pwm channel 5"
|
||||||
|
default n
|
||||||
|
if USING_PWM_CH5
|
||||||
|
config WM_PWM_CH5_PIN
|
||||||
|
int "wm pwm channel 5 pin number"
|
||||||
|
default 19
|
||||||
|
endif
|
||||||
|
endif
|
||||||
|
|
||||||
|
config BSP_USING_I2C
|
||||||
|
bool "Enable I2C"
|
||||||
|
select RT_USING_I2C
|
||||||
|
default n
|
||||||
|
|
||||||
if BSP_USING_RTC
|
if BSP_USING_I2C
|
||||||
config BSP_USING_ALARM
|
config WM_HW_I2C_FREQ
|
||||||
bool "Enable Alarm"
|
int "wm hardware I2C frequency(HZ)"
|
||||||
select RT_USING_ALARM
|
default 200000
|
||||||
|
endif
|
||||||
|
|
||||||
|
menuconfig BSP_USING_SOFT_I2C
|
||||||
|
bool "Enable SOFT I2C"
|
||||||
|
select RT_USING_I2C
|
||||||
|
select RT_USING_I2C_BITOPS
|
||||||
|
default n
|
||||||
|
|
||||||
|
if BSP_USING_SOFT_I2C
|
||||||
|
config BSP_USING_SOFT_I2C1
|
||||||
|
bool "Enabel SOFT I2C1"
|
||||||
default n
|
default n
|
||||||
|
endif
|
||||||
|
|
||||||
|
if BSP_USING_SOFT_I2C
|
||||||
|
config BSP_USING_SOFT_I2C2
|
||||||
|
bool "Enabel SOFT I2C2"
|
||||||
|
default n
|
||||||
endif
|
endif
|
||||||
|
|
||||||
config BSP_USING_STANDBY
|
menuconfig BSP_USING_SPI
|
||||||
bool "Enable standby"
|
bool "Enable SPI"
|
||||||
|
select RT_USING_SPI
|
||||||
|
default n
|
||||||
|
|
||||||
|
if BSP_USING_SPI
|
||||||
|
config WM_SPI_BUS_NAME
|
||||||
|
string "Set SPI BUS name"
|
||||||
|
default "spi0"
|
||||||
|
endif
|
||||||
|
|
||||||
|
config BSP_USING_WDT
|
||||||
|
bool "Enable WDT"
|
||||||
|
select RT_USING_WDT
|
||||||
|
default n
|
||||||
|
|
||||||
|
menuconfig BSP_USING_RTC
|
||||||
|
bool "Enable RTC"
|
||||||
|
select RT_USING_RTC
|
||||||
|
default n
|
||||||
|
|
||||||
|
if BSP_USING_RTC
|
||||||
|
config BSP_USING_ALARM
|
||||||
|
bool "Enable Alarm"
|
||||||
|
select RT_USING_ALARM
|
||||||
default n
|
default n
|
||||||
|
endif
|
||||||
|
|
||||||
endmenu
|
config BSP_USING_CRYPTO
|
||||||
|
bool "Enable Hardware Crypto"
|
||||||
|
select RT_USING_HWCRYPTO
|
||||||
|
select RT_HWCRYPTO_USING_AES
|
||||||
|
select RT_HWCRYPTO_USING_AES_ECB
|
||||||
|
select RT_HWCRYPTO_USING_AES_CBC
|
||||||
|
select RT_HWCRYPTO_USING_MD5
|
||||||
|
select RT_HWCRYPTO_USING_SHA1
|
||||||
|
select RT_HWCRYPTO_USING_RNG
|
||||||
|
select RT_HWCRYPTO_USING_CRC
|
||||||
|
select RT_HWCRYPTO_USING_CRC_07
|
||||||
|
select RT_HWCRYPTO_USING_CRC_8005
|
||||||
|
select RT_HWCRYPTO_USING_CRC_1021
|
||||||
|
select RT_HWCRYPTO_USING_CRC_04C11DB7
|
||||||
|
select RT_HWCRYPTO_USING_BIGNUM
|
||||||
|
select RT_HWCRYPTO_USING_BIGNUM_EXPTMOD
|
||||||
|
default n
|
||||||
|
|
||||||
menu "Offboard Peripheral Drivers"
|
config BSP_USING_STANDBY
|
||||||
menuconfig BSP_USING_FLASH
|
bool "Enable standby"
|
||||||
bool "Enable Flash"
|
default n
|
||||||
select RT_USING_SFUD
|
endmenu
|
||||||
select BSP_USING_SPI
|
|
||||||
default n
|
menu "External Libraries"
|
||||||
|
config WM_USING_ONESHOT
|
||||||
if BSP_USING_FLASH
|
bool "Using winner micro Oneshot"
|
||||||
config SPI_Flash_BUS_NAME
|
select RT_USING_WIFI
|
||||||
string "SPI BUS Name"
|
default y
|
||||||
default "spi0"
|
|
||||||
|
if WM_USING_ONESHOT
|
||||||
config SPI_Flash_CS_PIN
|
config WM_USING_ONESHOT_DEMO
|
||||||
int "SPI Flash CS pin number"
|
bool "Using Oneshot Demo"
|
||||||
default 20
|
default y
|
||||||
endif
|
endif
|
||||||
endmenu
|
|
||||||
endmenu
|
endmenu
|
||||||
|
|
|
||||||
|
|
@ -7,6 +7,7 @@ objs = []
|
||||||
src = Split('''
|
src = Split('''
|
||||||
board.c
|
board.c
|
||||||
drv_uart.c
|
drv_uart.c
|
||||||
|
drv_flash.c
|
||||||
pin_map.c
|
pin_map.c
|
||||||
''')
|
''')
|
||||||
|
|
||||||
|
|
@ -19,17 +20,11 @@ if GetDepend(['BSP_USING_WIFI']):
|
||||||
if GetDepend('BSP_USING_PIN'):
|
if GetDepend('BSP_USING_PIN'):
|
||||||
src += ['drv_pin.c']
|
src += ['drv_pin.c']
|
||||||
|
|
||||||
if GetDepend('BSP_USING_SDIO'):
|
|
||||||
src += ['drv_sdio.c']
|
|
||||||
|
|
||||||
if GetDepend('BSP_USING_CAN'):
|
|
||||||
src += ['drv_can.c']
|
|
||||||
|
|
||||||
if GetDepend('BSP_USING_HWTIMER'):
|
if GetDepend('BSP_USING_HWTIMER'):
|
||||||
src += ['drv_hw_timer.c']
|
src += ['drv_hw_timer.c']
|
||||||
|
|
||||||
if GetDepend('BSP_USING_CPUTIME'):
|
if GetDepend('BSP_USING_SOFT_I2C'):
|
||||||
src += ['drv_cputime.c']
|
src += ['drv_soft_i2c.c']
|
||||||
|
|
||||||
if GetDepend('BSP_USING_I2C'):
|
if GetDepend('BSP_USING_I2C'):
|
||||||
src += ['drv_i2c.c']
|
src += ['drv_i2c.c']
|
||||||
|
|
@ -37,12 +32,6 @@ if GetDepend('BSP_USING_I2C'):
|
||||||
if GetDepend('BSP_USING_SPI'):
|
if GetDepend('BSP_USING_SPI'):
|
||||||
src += ['drv_spi.c']
|
src += ['drv_spi.c']
|
||||||
|
|
||||||
if GetDepend(['BSP_USING_FLASH']):
|
|
||||||
src += ['drv_spiflash.c']
|
|
||||||
|
|
||||||
if GetDepend('BSP_USING_LCD'):
|
|
||||||
src += ['drv_lcd.c']
|
|
||||||
|
|
||||||
if GetDepend('BSP_USING_PWM'):
|
if GetDepend('BSP_USING_PWM'):
|
||||||
src += ['drv_pwm.c']
|
src += ['drv_pwm.c']
|
||||||
|
|
||||||
|
|
@ -55,6 +44,9 @@ if GetDepend('BSP_USING_WDT'):
|
||||||
if GetDepend('BSP_USING_STANDBY'):
|
if GetDepend('BSP_USING_STANDBY'):
|
||||||
src += ['drv_standby.c']
|
src += ['drv_standby.c']
|
||||||
|
|
||||||
|
if GetDepend('BSP_USING_CRYPTO'):
|
||||||
|
src += ['drv_crypto.c']
|
||||||
|
|
||||||
CPPPATH = [cwd]
|
CPPPATH = [cwd]
|
||||||
|
|
||||||
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
|
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
|
||||||
|
|
|
||||||
|
|
@ -133,6 +133,21 @@ static void _idle_hook_callback(void)
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static void _thread_inited_hook(rt_thread_t thread)
|
||||||
|
{
|
||||||
|
rt_uint32_t stack_size, stk_start;
|
||||||
|
|
||||||
|
stack_size = (rt_uint32_t)thread->stack_size;
|
||||||
|
stk_start = (rt_uint32_t)thread->stack_addr;
|
||||||
|
|
||||||
|
if ((stk_start + stack_size) >= TASK_STACK_USING_MEM_UPPER_RANGE)
|
||||||
|
{
|
||||||
|
rt_kprintf("thread[%s] stack only between 0x%08x and 0x%08x, please use rt_create_thread()!!\n",
|
||||||
|
thread->name, TASK_STACK_USING_MEM_LOWER_RANGE, TASK_STACK_USING_MEM_UPPER_RANGE);
|
||||||
|
}
|
||||||
|
RT_ASSERT((stk_start + stack_size) < TASK_STACK_USING_MEM_UPPER_RANGE);
|
||||||
|
}
|
||||||
|
|
||||||
void wm_sys_clk_config(void)
|
void wm_sys_clk_config(void)
|
||||||
{
|
{
|
||||||
tls_sys_clk sysclk;
|
tls_sys_clk sysclk;
|
||||||
|
|
@ -188,6 +203,14 @@ void rt_hw_board_init(void)
|
||||||
|
|
||||||
NVIC_SystemLPConfig(NVIC_LP_SLEEPDEEP, ENABLE);
|
NVIC_SystemLPConfig(NVIC_LP_SLEEPDEEP, ENABLE);
|
||||||
rt_thread_idle_sethook(_idle_hook_callback);
|
rt_thread_idle_sethook(_idle_hook_callback);
|
||||||
|
rt_thread_inited_sethook(_thread_inited_hook);
|
||||||
|
}
|
||||||
|
|
||||||
|
#include <wm_watchdog.h>
|
||||||
|
void rt_hw_cpu_reset(void)
|
||||||
|
{
|
||||||
|
extern void tls_sys_reset(void);
|
||||||
|
tls_sys_reset();
|
||||||
}
|
}
|
||||||
|
|
||||||
#ifdef RT_USING_FINSH
|
#ifdef RT_USING_FINSH
|
||||||
|
|
|
||||||
|
|
@ -22,7 +22,10 @@ extern int __bss_end__;
|
||||||
#define HEAP_BEGIN (&__bss_end__)
|
#define HEAP_BEGIN (&__bss_end__)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define HEAP_END (0x20038000UL)
|
#define HEAP_END (0x20028000UL)
|
||||||
|
|
||||||
|
#define HARDWARE_VERSION 0x0003U
|
||||||
|
#include "pin_config.h"
|
||||||
|
|
||||||
void rt_hw_board_init(void);
|
void rt_hw_board_init(void);
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,738 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2019 Winner Microelectronics Co., Ltd.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2019-05-17 tyx 1st version
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <rtthread.h>
|
||||||
|
#include <rtdevice.h>
|
||||||
|
#include <stdlib.h>
|
||||||
|
#include <string.h>
|
||||||
|
#include "drv_crypto.h"
|
||||||
|
#include "wm_crypto_hard.h"
|
||||||
|
|
||||||
|
// #define WM_HWCRYPTO_NOT_LOCK
|
||||||
|
// #define WM_HWCRYPTO_NOT_ALIGN_CHECK
|
||||||
|
|
||||||
|
extern u32 tls_crypto_crc_update_adv(u32 crc_val, CRYPTO_CRC_TYPE type, u8 mode, const unsigned char *in, u32 len);
|
||||||
|
extern int tls_crypto_des_encrypt_decrypt_adv(unsigned char *key, unsigned char *IV, const unsigned char *in, unsigned char *out, u32 len, CRYPTO_MODE cbc, CRYPTO_WAY dec);
|
||||||
|
extern int tls_crypto_3des_encrypt_decrypt_adv(unsigned char *key, unsigned char *IV, const unsigned char *in, unsigned char *out, u32 len, CRYPTO_MODE cbc, CRYPTO_WAY dec);
|
||||||
|
extern int tls_crypto_aes_encrypt_decrypt_adv(unsigned char *key, unsigned char *IV, const unsigned char *in, unsigned char *out, u32 len, CRYPTO_MODE cbc, CRYPTO_WAY dec);
|
||||||
|
extern int tls_crypto_rc4_adv(unsigned char *key, u32 keylen, const unsigned char *in, unsigned char *out, u32 len);
|
||||||
|
|
||||||
|
struct wm_hwcrypto_device
|
||||||
|
{
|
||||||
|
struct rt_hwcrypto_device dev;
|
||||||
|
struct rt_mutex mutex;
|
||||||
|
};
|
||||||
|
|
||||||
|
struct hash_ctx_des
|
||||||
|
{
|
||||||
|
psDigestContext_t contex;
|
||||||
|
};
|
||||||
|
|
||||||
|
static rt_uint32_t _rng_rand(struct hwcrypto_rng *ctx)
|
||||||
|
{
|
||||||
|
rt_uint32_t rand_num;
|
||||||
|
struct wm_hwcrypto_device *_hwcrypto = (struct wm_hwcrypto_device *)ctx->parent.device;
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_LOCK)
|
||||||
|
rt_mutex_take(&_hwcrypto->mutex, RT_WAITING_FOREVER);
|
||||||
|
#endif
|
||||||
|
tls_crypto_random_init((u32)rt_tick_get(), CRYPTO_RNG_SWITCH_32);
|
||||||
|
tls_crypto_random_bytes((unsigned char *)&rand_num, sizeof(rand_num));
|
||||||
|
tls_crypto_random_stop();
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_LOCK)
|
||||||
|
rt_mutex_release(&_hwcrypto->mutex);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return rand_num;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_uint32_t _crc_update(struct hwcrypto_crc *ctx, const rt_uint8_t *in, rt_size_t length)
|
||||||
|
{
|
||||||
|
rt_uint32_t crc_result;
|
||||||
|
CRYPTO_CRC_TYPE type;
|
||||||
|
u8 mode = 0;
|
||||||
|
struct wm_hwcrypto_device *_hwcrypto = (struct wm_hwcrypto_device *)ctx->parent.device;
|
||||||
|
unsigned char align_flag = 0;
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_ALIGN_CHECK)
|
||||||
|
if (((rt_uint32_t)in % 4) != 0)
|
||||||
|
{
|
||||||
|
void *temp;
|
||||||
|
temp = rt_malloc(length);
|
||||||
|
if (temp)
|
||||||
|
{
|
||||||
|
memcpy(temp, in, length);
|
||||||
|
in = temp;
|
||||||
|
align_flag = 1;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
switch (ctx->crc_cfg.poly)
|
||||||
|
{
|
||||||
|
case 0x04C11DB7:
|
||||||
|
type = CRYPTO_CRC_TYPE_32;
|
||||||
|
break;
|
||||||
|
case 0x00001021:
|
||||||
|
type = CRYPTO_CRC_TYPE_16_CCITT;
|
||||||
|
break;
|
||||||
|
case 0x00008005:
|
||||||
|
type = CRYPTO_CRC_TYPE_16_MODBUS;
|
||||||
|
break;
|
||||||
|
case 0x00000007:
|
||||||
|
case 0x00000207:
|
||||||
|
type = CRYPTO_CRC_TYPE_8;
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
mode |= ctx->crc_cfg.flags & CRC_FLAG_REFOUT ? OUTPUT_REFLECT : 0;
|
||||||
|
mode |= ctx->crc_cfg.flags & CRC_FLAG_REFIN ? INPUT_REFLECT : 0;
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_LOCK)
|
||||||
|
rt_mutex_take(&_hwcrypto->mutex, RT_WAITING_FOREVER);
|
||||||
|
#endif
|
||||||
|
crc_result = tls_crypto_crc_update_adv(ctx->crc_cfg.last_val, type, mode, in, length);
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_LOCK)
|
||||||
|
rt_mutex_release(&_hwcrypto->mutex);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_ALIGN_CHECK)
|
||||||
|
if (align_flag)
|
||||||
|
{
|
||||||
|
rt_free((rt_uint8_t *)in);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
ctx->crc_cfg.last_val = crc_result;
|
||||||
|
return crc_result ^ 0x00 ^ ctx->crc_cfg.xorout;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_err_t _hash_update(struct hwcrypto_hash *ctx, const rt_uint8_t *in, rt_size_t length)
|
||||||
|
{
|
||||||
|
rt_err_t err = RT_EOK;
|
||||||
|
struct wm_hwcrypto_device *_hwcrypto = (struct wm_hwcrypto_device *)ctx->parent.device;
|
||||||
|
unsigned char align_flag = 0;
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_ALIGN_CHECK)
|
||||||
|
if (((rt_uint32_t)in % 4) != 0)
|
||||||
|
{
|
||||||
|
void *temp;
|
||||||
|
temp = rt_malloc(length);
|
||||||
|
if (temp)
|
||||||
|
{
|
||||||
|
memcpy(temp, in, length);
|
||||||
|
in = temp;
|
||||||
|
align_flag = 1;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
return -RT_ENOMEM;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_LOCK)
|
||||||
|
rt_mutex_take(&_hwcrypto->mutex, RT_WAITING_FOREVER);
|
||||||
|
#endif
|
||||||
|
switch (ctx->parent.type & HWCRYPTO_MAIN_TYPE_MASK)
|
||||||
|
{
|
||||||
|
case HWCRYPTO_TYPE_MD5:
|
||||||
|
tls_crypto_md5_update(&((struct hash_ctx_des *)(ctx->parent.contex))->contex, in, length);
|
||||||
|
break;
|
||||||
|
case HWCRYPTO_TYPE_SHA1:
|
||||||
|
tls_crypto_sha1_update(&((struct hash_ctx_des *)(ctx->parent.contex))->contex, in, length);
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
err = -RT_ERROR;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_LOCK)
|
||||||
|
rt_mutex_release(&_hwcrypto->mutex);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_ALIGN_CHECK)
|
||||||
|
if (align_flag)
|
||||||
|
{
|
||||||
|
rt_free((rt_uint8_t *)in);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_err_t _hash_finish(struct hwcrypto_hash *ctx, rt_uint8_t *out, rt_size_t length)
|
||||||
|
{
|
||||||
|
rt_err_t err = RT_EOK;
|
||||||
|
struct wm_hwcrypto_device *_hwcrypto = (struct wm_hwcrypto_device *)ctx->parent.device;
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_LOCK)
|
||||||
|
rt_mutex_take(&_hwcrypto->mutex, RT_WAITING_FOREVER);
|
||||||
|
#endif
|
||||||
|
switch (ctx->parent.type & HWCRYPTO_MAIN_TYPE_MASK)
|
||||||
|
{
|
||||||
|
case HWCRYPTO_TYPE_MD5:
|
||||||
|
tls_crypto_md5_final(&((struct hash_ctx_des *)(ctx->parent.contex))->contex, out);
|
||||||
|
break;
|
||||||
|
case HWCRYPTO_TYPE_SHA1:
|
||||||
|
tls_crypto_sha1_final(&((struct hash_ctx_des *)(ctx->parent.contex))->contex, out);
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
err = -RT_ERROR;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_LOCK)
|
||||||
|
rt_mutex_release(&_hwcrypto->mutex);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_err_t _des_crypt(struct hwcrypto_symmetric *symmetric_ctx, struct hwcrypto_symmetric_info *symmetric_info)
|
||||||
|
{
|
||||||
|
CRYPTO_WAY mode;
|
||||||
|
CRYPTO_MODE cbc;
|
||||||
|
struct wm_hwcrypto_device *_hwcrypto = (struct wm_hwcrypto_device *)symmetric_ctx->parent.device;
|
||||||
|
unsigned char *in, *out, align_flag = 0;
|
||||||
|
|
||||||
|
if ((symmetric_ctx->key_bitlen >> 3) != 8
|
||||||
|
|| (symmetric_info->length % 8) != 0)
|
||||||
|
{
|
||||||
|
return -RT_EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
in = (unsigned char *)symmetric_info->in;
|
||||||
|
out = (unsigned char *)symmetric_info->out;
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_ALIGN_CHECK)
|
||||||
|
if (((rt_uint32_t)in % 4) != 0 || ((rt_uint32_t)out % 4) != 0)
|
||||||
|
{
|
||||||
|
in = rt_malloc(symmetric_info->length);
|
||||||
|
if (in)
|
||||||
|
{
|
||||||
|
memcpy(in, symmetric_info->in, symmetric_info->length);
|
||||||
|
out = in;
|
||||||
|
align_flag = 1;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
return -RT_ENOMEM;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
mode = symmetric_info->mode == HWCRYPTO_MODE_ENCRYPT ? CRYPTO_WAY_ENCRYPT : CRYPTO_WAY_DECRYPT;
|
||||||
|
|
||||||
|
switch (symmetric_ctx->parent.type & (HWCRYPTO_MAIN_TYPE_MASK | HWCRYPTO_SUB_TYPE_MASK))
|
||||||
|
{
|
||||||
|
case HWCRYPTO_TYPE_DES_ECB:
|
||||||
|
cbc = CRYPTO_MODE_ECB;
|
||||||
|
break;
|
||||||
|
case HWCRYPTO_TYPE_DES_CBC:
|
||||||
|
cbc = CRYPTO_MODE_CBC;
|
||||||
|
break;
|
||||||
|
default :
|
||||||
|
return -RT_ERROR;
|
||||||
|
}
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_LOCK)
|
||||||
|
rt_mutex_take(&_hwcrypto->mutex, RT_WAITING_FOREVER);
|
||||||
|
#endif
|
||||||
|
tls_crypto_des_encrypt_decrypt_adv(symmetric_ctx->key, symmetric_ctx->iv,
|
||||||
|
symmetric_info->in, symmetric_info->out,
|
||||||
|
symmetric_info->length, cbc, mode);
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_LOCK)
|
||||||
|
rt_mutex_release(&_hwcrypto->mutex);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_ALIGN_CHECK)
|
||||||
|
if (align_flag)
|
||||||
|
{
|
||||||
|
memcpy(symmetric_info->out, out, symmetric_info->length);
|
||||||
|
rt_free(in);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return RT_EOK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_err_t _des3_crypt(struct hwcrypto_symmetric *symmetric_ctx, struct hwcrypto_symmetric_info *symmetric_info)
|
||||||
|
{
|
||||||
|
CRYPTO_WAY mode;
|
||||||
|
CRYPTO_MODE cbc;
|
||||||
|
struct wm_hwcrypto_device *_hwcrypto = (struct wm_hwcrypto_device *)symmetric_ctx->parent.device;
|
||||||
|
unsigned char *in, *out, align_flag = 0;
|
||||||
|
|
||||||
|
if ((symmetric_ctx->key_bitlen >> 3) != 24
|
||||||
|
|| (symmetric_info->length % 8) != 0)
|
||||||
|
{
|
||||||
|
return -RT_EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
in = (unsigned char *)symmetric_info->in;
|
||||||
|
out = (unsigned char *)symmetric_info->out;
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_ALIGN_CHECK)
|
||||||
|
if (((rt_uint32_t)in % 4) != 0 || ((rt_uint32_t)out % 4) != 0)
|
||||||
|
{
|
||||||
|
in = rt_malloc(symmetric_info->length);
|
||||||
|
if (in)
|
||||||
|
{
|
||||||
|
memcpy(in, symmetric_info->in, symmetric_info->length);
|
||||||
|
out = in;
|
||||||
|
align_flag = 1;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
return -RT_ENOMEM;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
mode = symmetric_info->mode == HWCRYPTO_MODE_ENCRYPT ? CRYPTO_WAY_ENCRYPT : CRYPTO_WAY_DECRYPT;
|
||||||
|
|
||||||
|
switch (symmetric_ctx->parent.type & (HWCRYPTO_MAIN_TYPE_MASK | HWCRYPTO_SUB_TYPE_MASK))
|
||||||
|
{
|
||||||
|
case HWCRYPTO_TYPE_3DES_ECB:
|
||||||
|
cbc = CRYPTO_MODE_ECB;
|
||||||
|
break;
|
||||||
|
case HWCRYPTO_TYPE_3DES_CBC:
|
||||||
|
cbc = CRYPTO_MODE_CBC;
|
||||||
|
break;
|
||||||
|
default :
|
||||||
|
return -RT_ERROR;
|
||||||
|
}
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_LOCK)
|
||||||
|
rt_mutex_take(&_hwcrypto->mutex, RT_WAITING_FOREVER);
|
||||||
|
#endif
|
||||||
|
tls_crypto_3des_encrypt_decrypt_adv(symmetric_ctx->key, symmetric_ctx->iv,
|
||||||
|
symmetric_info->in, symmetric_info->out,
|
||||||
|
symmetric_info->length, cbc, mode);
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_LOCK)
|
||||||
|
rt_mutex_release(&_hwcrypto->mutex);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_ALIGN_CHECK)
|
||||||
|
if (align_flag)
|
||||||
|
{
|
||||||
|
memcpy(symmetric_info->out, out, symmetric_info->length);
|
||||||
|
rt_free(in);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return RT_EOK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_err_t _rc4_crypt(struct hwcrypto_symmetric *symmetric_ctx, struct hwcrypto_symmetric_info *symmetric_info)
|
||||||
|
{
|
||||||
|
struct wm_hwcrypto_device *_hwcrypto = (struct wm_hwcrypto_device *)symmetric_ctx->parent.device;
|
||||||
|
unsigned char *in, *out, align_flag = 0;
|
||||||
|
|
||||||
|
if ((symmetric_ctx->key_bitlen >> 3) != 16)
|
||||||
|
{
|
||||||
|
return -RT_EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
in = (unsigned char *)symmetric_info->in;
|
||||||
|
out = (unsigned char *)symmetric_info->out;
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_ALIGN_CHECK)
|
||||||
|
if (((rt_uint32_t)in % 4) != 0 || ((rt_uint32_t)out % 4) != 0)
|
||||||
|
{
|
||||||
|
in = rt_malloc(symmetric_info->length);
|
||||||
|
if (in)
|
||||||
|
{
|
||||||
|
memcpy(in, symmetric_info->in, symmetric_info->length);
|
||||||
|
out = in;
|
||||||
|
align_flag = 1;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
return -RT_ENOMEM;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_LOCK)
|
||||||
|
rt_mutex_take(&_hwcrypto->mutex, RT_WAITING_FOREVER);
|
||||||
|
#endif
|
||||||
|
tls_crypto_rc4_adv(symmetric_ctx->key, symmetric_ctx->key_bitlen >> 3,
|
||||||
|
(unsigned char *)symmetric_info->in,
|
||||||
|
symmetric_info->out,
|
||||||
|
symmetric_info->length);
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_LOCK)
|
||||||
|
rt_mutex_release(&_hwcrypto->mutex);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_ALIGN_CHECK)
|
||||||
|
if (align_flag)
|
||||||
|
{
|
||||||
|
memcpy(symmetric_info->out, out, symmetric_info->length);
|
||||||
|
rt_free(in);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return RT_EOK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_err_t _aes_crypt(struct hwcrypto_symmetric *symmetric_ctx, struct hwcrypto_symmetric_info *symmetric_info)
|
||||||
|
{
|
||||||
|
CRYPTO_WAY mode;
|
||||||
|
CRYPTO_MODE cbc;
|
||||||
|
struct wm_hwcrypto_device *_hwcrypto = (struct wm_hwcrypto_device *)symmetric_ctx->parent.device;
|
||||||
|
unsigned char *in, *out, align_flag = 0;
|
||||||
|
|
||||||
|
if ((symmetric_ctx->key_bitlen >> 3) != 16
|
||||||
|
|| (symmetric_info->length % 16) != 0)
|
||||||
|
{
|
||||||
|
return -RT_EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
in = (unsigned char *)symmetric_info->in;
|
||||||
|
out = (unsigned char *)symmetric_info->out;
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_ALIGN_CHECK)
|
||||||
|
if (((rt_uint32_t)in % 4) != 0 || ((rt_uint32_t)out % 4) != 0)
|
||||||
|
{
|
||||||
|
in = rt_malloc(symmetric_info->length);
|
||||||
|
if (in)
|
||||||
|
{
|
||||||
|
memcpy(in, symmetric_info->in, symmetric_info->length);
|
||||||
|
out = in;
|
||||||
|
align_flag = 1;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
return -RT_ENOMEM;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
mode = symmetric_info->mode == HWCRYPTO_MODE_ENCRYPT ? CRYPTO_WAY_ENCRYPT : CRYPTO_WAY_DECRYPT;
|
||||||
|
|
||||||
|
switch (symmetric_ctx->parent.type & (HWCRYPTO_MAIN_TYPE_MASK | HWCRYPTO_SUB_TYPE_MASK))
|
||||||
|
{
|
||||||
|
case HWCRYPTO_TYPE_AES_ECB:
|
||||||
|
cbc = CRYPTO_MODE_ECB;
|
||||||
|
break;
|
||||||
|
case HWCRYPTO_TYPE_AES_CBC:
|
||||||
|
cbc = CRYPTO_MODE_CBC;
|
||||||
|
break;
|
||||||
|
case HWCRYPTO_TYPE_AES_CTR:
|
||||||
|
cbc = CRYPTO_MODE_CTR;
|
||||||
|
break;
|
||||||
|
default :
|
||||||
|
return -RT_ERROR;
|
||||||
|
}
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_LOCK)
|
||||||
|
rt_mutex_take(&_hwcrypto->mutex, RT_WAITING_FOREVER);
|
||||||
|
#endif
|
||||||
|
tls_crypto_aes_encrypt_decrypt_adv(symmetric_ctx->key, symmetric_ctx->iv,
|
||||||
|
in, out, symmetric_info->length, cbc, mode);
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_LOCK)
|
||||||
|
rt_mutex_release(&_hwcrypto->mutex);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if !defined(WM_HWCRYPTO_NOT_ALIGN_CHECK)
|
||||||
|
if (align_flag)
|
||||||
|
{
|
||||||
|
memcpy(symmetric_info->out, out, symmetric_info->length);
|
||||||
|
rt_free(in);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return RT_EOK;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**< a = b ^ c (mod d) */
|
||||||
|
static rt_err_t _bignum_exptmod(struct hwcrypto_bignum *bignum_ctx,
|
||||||
|
struct hw_bignum_mpi *x,
|
||||||
|
const struct hw_bignum_mpi *a,
|
||||||
|
const struct hw_bignum_mpi *b,
|
||||||
|
const struct hw_bignum_mpi *c)
|
||||||
|
{
|
||||||
|
pstm_int pa, pb, pm, pres;
|
||||||
|
u32 * buff_a = NULL;
|
||||||
|
u32 * buff_b = NULL;
|
||||||
|
u32 * buff_m = NULL;
|
||||||
|
int err = -1;
|
||||||
|
void *buff;
|
||||||
|
int buff_len;
|
||||||
|
|
||||||
|
pstm_init(NULL, &pres);
|
||||||
|
|
||||||
|
buff_a = tls_mem_alloc(a->total);
|
||||||
|
if(buff_a == NULL)
|
||||||
|
goto out;
|
||||||
|
buff_b = tls_mem_alloc(b->total);
|
||||||
|
if(buff_b == NULL)
|
||||||
|
goto out;
|
||||||
|
buff_m = tls_mem_alloc(c->total);
|
||||||
|
if(buff_m == NULL)
|
||||||
|
goto out;
|
||||||
|
|
||||||
|
memset(buff_a, 0, a->total);
|
||||||
|
memset(buff_b, 0, b->total);
|
||||||
|
memset(buff_m, 0, c->total);
|
||||||
|
|
||||||
|
memcpy(buff_a, a->p, a->total);
|
||||||
|
memcpy(buff_b, b->p, b->total);
|
||||||
|
memcpy(buff_m, c->p, c->total);
|
||||||
|
|
||||||
|
pstm_reverse((unsigned char *)buff_a, a->total);
|
||||||
|
pstm_reverse((unsigned char *)buff_b, b->total);
|
||||||
|
pstm_reverse((unsigned char *)buff_m, c->total);
|
||||||
|
|
||||||
|
// *((volatile unsigned int *)0x40000710) = *((volatile unsigned int *)0x40000710) | (0x1 << 28);
|
||||||
|
|
||||||
|
if ((err = pstm_init_for_read_unsigned_bin(NULL, &pa, a->total)) != PS_SUCCESS){
|
||||||
|
goto out;
|
||||||
|
}
|
||||||
|
if ((err = pstm_read_unsigned_bin(&pa, (unsigned char *)buff_a, a->total)) != PS_SUCCESS) {
|
||||||
|
goto out;
|
||||||
|
}
|
||||||
|
if ((err = pstm_init_for_read_unsigned_bin(NULL, &pb, b->total)) != PS_SUCCESS){
|
||||||
|
goto out;
|
||||||
|
}
|
||||||
|
if ((err = pstm_read_unsigned_bin(&pb, (unsigned char *)buff_b, b->total)) != PS_SUCCESS) {
|
||||||
|
goto out;
|
||||||
|
}
|
||||||
|
if ((err = pstm_init_for_read_unsigned_bin(NULL, &pm, c->total)) != PS_SUCCESS){
|
||||||
|
goto out;
|
||||||
|
}
|
||||||
|
if ((err = pstm_read_unsigned_bin(&pm, (unsigned char *)buff_m, c->total)) != PS_SUCCESS) {
|
||||||
|
goto out;
|
||||||
|
}
|
||||||
|
|
||||||
|
tls_crypto_exptmod(&pa, &pb, &pm, &pres);
|
||||||
|
buff_len = pstm_unsigned_bin_size(&pres);
|
||||||
|
buff = rt_malloc(buff_len);
|
||||||
|
pstm_to_unsigned_bin_nr(NULL, &pres, buff);
|
||||||
|
x->sign = pres.sign;
|
||||||
|
x->p = buff;
|
||||||
|
x->total = buff_len;
|
||||||
|
|
||||||
|
out:
|
||||||
|
if(buff_a)
|
||||||
|
tls_mem_free(buff_a);
|
||||||
|
if(buff_b)
|
||||||
|
tls_mem_free(buff_b);
|
||||||
|
if(buff_m)
|
||||||
|
tls_mem_free(buff_m);
|
||||||
|
|
||||||
|
pstm_clear(&pa);
|
||||||
|
pstm_clear(&pb);
|
||||||
|
pstm_clear(&pm);
|
||||||
|
pstm_clear(&pres);
|
||||||
|
|
||||||
|
if (a->sign < 0)
|
||||||
|
{
|
||||||
|
rt_kprintf("a->sign < 0\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
return err == PS_SUCCESS ? RT_EOK : -RT_ERROR;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct hwcrypto_symmetric_ops aes_ops =
|
||||||
|
{
|
||||||
|
.crypt = _aes_crypt,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct hwcrypto_symmetric_ops rc4_ops =
|
||||||
|
{
|
||||||
|
.crypt = _rc4_crypt,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct hwcrypto_symmetric_ops des_ops =
|
||||||
|
{
|
||||||
|
.crypt = _des_crypt,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct hwcrypto_symmetric_ops des3_ops =
|
||||||
|
{
|
||||||
|
.crypt = _des3_crypt,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct hwcrypto_hash_ops hash_ops =
|
||||||
|
{
|
||||||
|
.update = _hash_update,
|
||||||
|
.finish = _hash_finish,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct hwcrypto_rng_ops rng_ops =
|
||||||
|
{
|
||||||
|
.update = _rng_rand,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct hwcrypto_crc_ops crc_ops =
|
||||||
|
{
|
||||||
|
.update = _crc_update,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct hwcrypto_bignum_ops bignum_ops =
|
||||||
|
{
|
||||||
|
.add = RT_NULL,
|
||||||
|
.sub = RT_NULL,
|
||||||
|
.mul = RT_NULL,
|
||||||
|
.mulmod = RT_NULL,
|
||||||
|
.exptmod = _bignum_exptmod,
|
||||||
|
};
|
||||||
|
|
||||||
|
static rt_err_t _crypto_create(struct rt_hwcrypto_ctx *ctx)
|
||||||
|
{
|
||||||
|
rt_err_t res = RT_EOK;
|
||||||
|
void *contex;
|
||||||
|
|
||||||
|
switch (ctx->type & HWCRYPTO_MAIN_TYPE_MASK)
|
||||||
|
{
|
||||||
|
case HWCRYPTO_TYPE_AES :
|
||||||
|
ctx->contex = RT_NULL;
|
||||||
|
((struct hwcrypto_symmetric *)ctx)->ops = &aes_ops;
|
||||||
|
break;
|
||||||
|
case HWCRYPTO_TYPE_RC4 :
|
||||||
|
ctx->contex = RT_NULL;
|
||||||
|
((struct hwcrypto_symmetric *)ctx)->ops = &rc4_ops;
|
||||||
|
break;
|
||||||
|
case HWCRYPTO_TYPE_MD5:
|
||||||
|
case HWCRYPTO_TYPE_SHA1:
|
||||||
|
contex = rt_malloc(sizeof(struct hash_ctx_des));
|
||||||
|
if (contex == RT_NULL)
|
||||||
|
{
|
||||||
|
return -RT_ENOMEM;
|
||||||
|
}
|
||||||
|
memset(contex, 0, sizeof(struct hash_ctx_des));
|
||||||
|
ctx->contex = contex;
|
||||||
|
((struct hwcrypto_hash *)ctx)->ops = &hash_ops;
|
||||||
|
if ((ctx->type & HWCRYPTO_MAIN_TYPE_MASK) == HWCRYPTO_TYPE_MD5)
|
||||||
|
{
|
||||||
|
tls_crypto_md5_init(&((struct hash_ctx_des *)contex)->contex);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
tls_crypto_sha1_init(&((struct hash_ctx_des *)contex)->contex);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case HWCRYPTO_TYPE_DES:
|
||||||
|
ctx->contex = RT_NULL;
|
||||||
|
((struct hwcrypto_symmetric *)ctx)->ops = &des_ops;
|
||||||
|
break;
|
||||||
|
case HWCRYPTO_TYPE_3DES:
|
||||||
|
ctx->contex = RT_NULL;
|
||||||
|
((struct hwcrypto_symmetric *)ctx)->ops = &des3_ops;
|
||||||
|
break;
|
||||||
|
case HWCRYPTO_TYPE_RNG:
|
||||||
|
ctx->contex = RT_NULL;
|
||||||
|
((struct hwcrypto_rng *)ctx)->ops = &rng_ops;
|
||||||
|
ctx->contex = RT_NULL;
|
||||||
|
break;
|
||||||
|
case HWCRYPTO_TYPE_CRC:
|
||||||
|
ctx->contex = RT_NULL;
|
||||||
|
((struct hwcrypto_crc *)ctx)->ops = &crc_ops;
|
||||||
|
break;
|
||||||
|
case HWCRYPTO_TYPE_BIGNUM:
|
||||||
|
((struct hwcrypto_bignum *)ctx)->ops = &bignum_ops;
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
res = -RT_ERROR;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
return res;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void _crypto_destroy(struct rt_hwcrypto_ctx *ctx)
|
||||||
|
{
|
||||||
|
rt_free(ctx->contex);
|
||||||
|
}
|
||||||
|
|
||||||
|
static rt_err_t _crypto_clone(struct rt_hwcrypto_ctx *des, const struct rt_hwcrypto_ctx *src)
|
||||||
|
{
|
||||||
|
rt_err_t res = RT_EOK;
|
||||||
|
|
||||||
|
switch (src->type & HWCRYPTO_MAIN_TYPE_MASK)
|
||||||
|
{
|
||||||
|
case HWCRYPTO_TYPE_AES:
|
||||||
|
case HWCRYPTO_TYPE_RC4:
|
||||||
|
case HWCRYPTO_TYPE_RNG:
|
||||||
|
case HWCRYPTO_TYPE_CRC:
|
||||||
|
case HWCRYPTO_TYPE_BIGNUM:
|
||||||
|
break;
|
||||||
|
case HWCRYPTO_TYPE_MD5:
|
||||||
|
case HWCRYPTO_TYPE_SHA1:
|
||||||
|
if (des->contex && src->contex)
|
||||||
|
{
|
||||||
|
rt_memcpy(des->contex, src->contex, sizeof(struct hash_ctx_des));
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
res = -RT_ERROR;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
return res;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void _crypto_reset(struct rt_hwcrypto_ctx *ctx)
|
||||||
|
{
|
||||||
|
switch (ctx->type & HWCRYPTO_MAIN_TYPE_MASK)
|
||||||
|
{
|
||||||
|
case HWCRYPTO_TYPE_AES:
|
||||||
|
case HWCRYPTO_TYPE_RC4:
|
||||||
|
case HWCRYPTO_TYPE_RNG:
|
||||||
|
case HWCRYPTO_TYPE_CRC:
|
||||||
|
break;
|
||||||
|
case HWCRYPTO_TYPE_MD5:
|
||||||
|
tls_crypto_md5_init(&((struct hash_ctx_des *)(ctx->contex))->contex);
|
||||||
|
break;
|
||||||
|
case HWCRYPTO_TYPE_SHA1:
|
||||||
|
tls_crypto_sha1_init(&((struct hash_ctx_des *)(ctx->contex))->contex);
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct rt_hwcrypto_ops _ops =
|
||||||
|
{
|
||||||
|
.create = _crypto_create,
|
||||||
|
.destroy = _crypto_destroy,
|
||||||
|
.copy = _crypto_clone,
|
||||||
|
.reset = _crypto_reset,
|
||||||
|
};
|
||||||
|
|
||||||
|
extern u8 *wpa_supplicant_get_mac(void);
|
||||||
|
|
||||||
|
int wm_hw_crypto_device_init(void)
|
||||||
|
{
|
||||||
|
static struct wm_hwcrypto_device _crypto_dev;
|
||||||
|
|
||||||
|
_crypto_dev.dev.ops = &_ops;
|
||||||
|
_crypto_dev.dev.id = 0;
|
||||||
|
rt_memcpy(&_crypto_dev.dev.id, wpa_supplicant_get_mac(),
|
||||||
|
sizeof(_crypto_dev.dev.id) > 6 ?
|
||||||
|
6 : sizeof(_crypto_dev.dev.id));
|
||||||
|
_crypto_dev.dev.user_data = &_crypto_dev;
|
||||||
|
|
||||||
|
if (rt_hwcrypto_register(&_crypto_dev.dev,
|
||||||
|
RT_HWCRYPTO_DEFAULT_NAME) != RT_EOK)
|
||||||
|
{
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
rt_mutex_init(&_crypto_dev.mutex, RT_HWCRYPTO_DEFAULT_NAME, RT_IPC_FLAG_FIFO);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
INIT_DEVICE_EXPORT(wm_hw_crypto_device_init);
|
||||||
|
|
@ -5,12 +5,12 @@
|
||||||
*
|
*
|
||||||
* Change Logs:
|
* Change Logs:
|
||||||
* Date Author Notes
|
* Date Author Notes
|
||||||
* 2018-11-12 fanwenl 1st version
|
* 2019-05-17 tyx 1st version
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef __DRV_SPI_FLASH_H_
|
#ifndef __DRV_CRYPTO_H__
|
||||||
#define __DRV_SPI_FLASH_H_
|
#define __DRV_CRYPTO_H__
|
||||||
|
|
||||||
int wm_nor_flash_init(void);
|
int wm_hw_crypto_device_init(void);
|
||||||
|
|
||||||
#endif /* __DRV_SPI_FLASH_H_ */
|
#endif /* __DRV_CRYPTO_H__ */
|
||||||
|
|
@ -0,0 +1,158 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2019 Winner Microelectronics Co., Ltd.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2019-04-04 tyx 1st version
|
||||||
|
*/
|
||||||
|
#include <rtthread.h>
|
||||||
|
#include <rtdevice.h>
|
||||||
|
#include "wm_flash_map.h"
|
||||||
|
#include "wm_internal_flash.h"
|
||||||
|
#include "drv_flash.h"
|
||||||
|
|
||||||
|
#define FLASH_SECTOR (4096)
|
||||||
|
|
||||||
|
#ifdef RT_USING_SPI
|
||||||
|
static void *_spi0;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
extern unsigned int flashtotalsize;
|
||||||
|
|
||||||
|
rt_uint32_t wm_flash_total(void)
|
||||||
|
{
|
||||||
|
rt_uint32_t total = 0x100000;
|
||||||
|
|
||||||
|
if (flashtotalsize == 0x200000)
|
||||||
|
{
|
||||||
|
total = 0x200000;
|
||||||
|
}
|
||||||
|
|
||||||
|
return total;
|
||||||
|
}
|
||||||
|
|
||||||
|
rt_uint32_t wm_flash_addr(void)
|
||||||
|
{
|
||||||
|
return FLASH_BASE_ADDR;
|
||||||
|
}
|
||||||
|
|
||||||
|
rt_uint32_t wm_flash_blksize(void)
|
||||||
|
{
|
||||||
|
return FLASH_SECTOR;
|
||||||
|
}
|
||||||
|
|
||||||
|
int wm_flash_read(long offset, void *data, int size)
|
||||||
|
{
|
||||||
|
offset += FLASH_BASE_ADDR;
|
||||||
|
#ifdef RT_USING_SPI
|
||||||
|
if (_spi0)
|
||||||
|
{
|
||||||
|
rt_spi_take_bus(_spi0);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
if (tls_fls_read(offset, data, size) != TLS_FLS_STATUS_OK)
|
||||||
|
{
|
||||||
|
size = -1;
|
||||||
|
}
|
||||||
|
#ifdef RT_USING_SPI
|
||||||
|
if (_spi0)
|
||||||
|
{
|
||||||
|
rt_spi_release_bus(_spi0);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return size;
|
||||||
|
}
|
||||||
|
|
||||||
|
int wm_flash_write(long offset, void *data, int size)
|
||||||
|
{
|
||||||
|
offset += FLASH_BASE_ADDR;
|
||||||
|
#ifdef RT_USING_SPI
|
||||||
|
if (_spi0)
|
||||||
|
{
|
||||||
|
rt_spi_take_bus(_spi0);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
if (tls_fls_write(offset, data, size) != TLS_FLS_STATUS_OK)
|
||||||
|
{
|
||||||
|
size = -1;
|
||||||
|
}
|
||||||
|
#ifdef RT_USING_SPI
|
||||||
|
if (_spi0)
|
||||||
|
{
|
||||||
|
rt_spi_release_bus(_spi0);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return size;
|
||||||
|
}
|
||||||
|
|
||||||
|
int wm_flash_erase(long offset, int size)
|
||||||
|
{
|
||||||
|
int count, sector;
|
||||||
|
|
||||||
|
offset += FLASH_BASE_ADDR;
|
||||||
|
count = size / FLASH_SECTOR;
|
||||||
|
sector = offset / FLASH_SECTOR;
|
||||||
|
#ifdef RT_USING_SPI
|
||||||
|
if (_spi0)
|
||||||
|
{
|
||||||
|
rt_spi_take_bus(_spi0);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
while (count)
|
||||||
|
{
|
||||||
|
if (tls_fls_erase(sector) != TLS_FLS_STATUS_OK)
|
||||||
|
{
|
||||||
|
size = -1;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
count--;
|
||||||
|
sector++;
|
||||||
|
}
|
||||||
|
#ifdef RT_USING_SPI
|
||||||
|
if (_spi0)
|
||||||
|
{
|
||||||
|
rt_spi_release_bus(_spi0);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return size;
|
||||||
|
}
|
||||||
|
|
||||||
|
int wm_flash_init(void)
|
||||||
|
{
|
||||||
|
#ifdef RT_USING_SPI
|
||||||
|
rt_err_t ret;
|
||||||
|
|
||||||
|
if (_spi0 != RT_NULL)
|
||||||
|
{
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
_spi0 = (struct rt_spi_device *)rt_malloc(sizeof(struct rt_spi_device));
|
||||||
|
RT_ASSERT(_spi0 != RT_NULL);
|
||||||
|
|
||||||
|
#ifdef WM_SPI_BUS_NAME
|
||||||
|
ret = rt_spi_bus_attach_device(_spi0, "flash", WM_SPI_BUS_NAME, RT_NULL);
|
||||||
|
#else
|
||||||
|
ret = rt_spi_bus_attach_device(_spi0, "flash", "spi0", RT_NULL);
|
||||||
|
#endif
|
||||||
|
if (ret != RT_EOK)
|
||||||
|
{
|
||||||
|
rt_free(_spi0);
|
||||||
|
_spi0 = RT_NULL;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (_spi0)
|
||||||
|
{
|
||||||
|
((struct rt_spi_device *)_spi0)->config.mode = RT_SPI_MODE_0;
|
||||||
|
((struct rt_spi_device *)_spi0)->config.data_width = 8;
|
||||||
|
((struct rt_spi_device *)_spi0)->config.max_hz = 20 * 1000 * 1000;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2019 Winner Microelectronics Co., Ltd.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2019-04-04 tyx 1st version
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __DRV_FLASH_H__
|
||||||
|
#define __DRV_FLASH_H__
|
||||||
|
|
||||||
|
#include <rtthread.h>
|
||||||
|
|
||||||
|
int wm_flash_read(long offset, void *data, int size);
|
||||||
|
int wm_flash_write(long offset, void *data, int size);
|
||||||
|
int wm_flash_erase(long offset, int size);
|
||||||
|
int wm_flash_init(void);
|
||||||
|
rt_uint32_t wm_flash_total(void);
|
||||||
|
rt_uint32_t wm_flash_addr(void);
|
||||||
|
rt_uint32_t wm_flash_blksize(void);
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -63,6 +63,11 @@ static void wm_timer_stop(rt_hwtimer_t *timer)
|
||||||
tls_timer_stop(wm_timer->id);
|
tls_timer_stop(wm_timer->id);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static rt_uint32_t wm_timer_get(rt_hwtimer_t *timer)
|
||||||
|
{
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
static rt_err_t wm_timer_ctrl(rt_hwtimer_t *timer, rt_uint32_t cmd, void *arg)
|
static rt_err_t wm_timer_ctrl(rt_hwtimer_t *timer, rt_uint32_t cmd, void *arg)
|
||||||
{
|
{
|
||||||
/* The frequency value is an immutable value. */
|
/* The frequency value is an immutable value. */
|
||||||
|
|
@ -93,7 +98,7 @@ static const struct rt_hwtimer_ops _ops =
|
||||||
wm_timer_init,
|
wm_timer_init,
|
||||||
wm_timer_start,
|
wm_timer_start,
|
||||||
wm_timer_stop,
|
wm_timer_stop,
|
||||||
RT_NULL,
|
wm_timer_get,
|
||||||
wm_timer_ctrl,
|
wm_timer_ctrl,
|
||||||
};
|
};
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -10,6 +10,7 @@
|
||||||
|
|
||||||
#include <rtdevice.h>
|
#include <rtdevice.h>
|
||||||
#include <rtthread.h>
|
#include <rtthread.h>
|
||||||
|
#include "board.h"
|
||||||
#include "wm_i2c.h"
|
#include "wm_i2c.h"
|
||||||
#include "wm_io.h"
|
#include "wm_io.h"
|
||||||
#include "wm_gpio_afsel.h"
|
#include "wm_gpio_afsel.h"
|
||||||
|
|
@ -167,7 +168,11 @@ int wm_hw_i2c_init(void)
|
||||||
tls_i2c_init(WM_HW_I2C_FREQ);
|
tls_i2c_init(WM_HW_I2C_FREQ);
|
||||||
|
|
||||||
wm_i2c.parent.ops = &wm_i2c_ops;
|
wm_i2c.parent.ops = &wm_i2c_ops;
|
||||||
|
#ifdef WM_I2C_BUS_NAME
|
||||||
|
rt_i2c_bus_device_register(&wm_i2c.parent, WM_I2C_BUS_NAME);
|
||||||
|
#else
|
||||||
rt_i2c_bus_device_register(&wm_i2c.parent, "i2c");
|
rt_i2c_bus_device_register(&wm_i2c.parent, "i2c");
|
||||||
|
#endif
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
|
||||||
|
|
@ -20,6 +20,10 @@
|
||||||
|
|
||||||
#ifdef BSP_USING_RTC
|
#ifdef BSP_USING_RTC
|
||||||
|
|
||||||
|
#if defined(RT_USING_SOFT_RTC)
|
||||||
|
#error "Please CANCEL the RT_USING_SOFT_RTC option. Make sure there is only one RTC device on the system."
|
||||||
|
#endif
|
||||||
|
|
||||||
static struct rt_rtc_device rtc_device;
|
static struct rt_rtc_device rtc_device;
|
||||||
|
|
||||||
static time_t wm_get_timestamp(void)
|
static time_t wm_get_timestamp(void)
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,243 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2006-2019, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2019-03-22 balanceTWK first version
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <board.h>
|
||||||
|
#include "drv_soft_i2c.h"
|
||||||
|
|
||||||
|
#include "wm_regs.h"
|
||||||
|
#include "wm_gpio.h"
|
||||||
|
#include "pin_map.h"
|
||||||
|
|
||||||
|
#define DBG_SECTION_NAME "soft_i2c"
|
||||||
|
#define DBG_COLOR
|
||||||
|
#define DBG_LEVEL DBG_LOG
|
||||||
|
#include <rtdbg.h>
|
||||||
|
|
||||||
|
#ifdef BSP_USING_SOFT_I2C
|
||||||
|
|
||||||
|
#if !defined(BSP_USING_SOFT_I2C1) && !defined(BSP_USING_SOFT_I2C2) && !defined(BSP_USING_SOFT_I2C3)
|
||||||
|
#error "Please define at least one BSP_USING_SOFT_I2Cx"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
static const struct w60x_soft_i2c_config soft_i2c_config[] =
|
||||||
|
{
|
||||||
|
#ifdef BSP_USING_SOFT_I2C1
|
||||||
|
I2C1_BUS_CONFIG,
|
||||||
|
#endif
|
||||||
|
#ifdef BSP_USING_SOFT_I2C2
|
||||||
|
I2C2_BUS_CONFIG,
|
||||||
|
#endif
|
||||||
|
#ifdef BSP_USING_SOFT_I2C3
|
||||||
|
I2C3_BUS_CONFIG,
|
||||||
|
#endif
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct w60x_i2c i2c_obj[sizeof(soft_i2c_config) / sizeof(soft_i2c_config[0])];
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This function initializes the i2c pin.
|
||||||
|
*
|
||||||
|
* @param w60x i2c dirver class.
|
||||||
|
*/
|
||||||
|
static void w60x_i2c_gpio_init(struct w60x_i2c *i2c)
|
||||||
|
{
|
||||||
|
struct w60x_soft_i2c_config* cfg = (struct w60x_soft_i2c_config*)i2c->ops.data;
|
||||||
|
rt_int16_t scl,sda;
|
||||||
|
|
||||||
|
scl = wm_get_pin(cfg->scl);
|
||||||
|
sda = wm_get_pin(cfg->sda);
|
||||||
|
|
||||||
|
tls_gpio_cfg((enum tls_io_name)scl, WM_GPIO_DIR_OUTPUT, WM_GPIO_ATTR_PULLHIGH);
|
||||||
|
tls_gpio_cfg((enum tls_io_name)sda, WM_GPIO_DIR_OUTPUT, WM_GPIO_ATTR_PULLHIGH);
|
||||||
|
|
||||||
|
tls_gpio_write((enum tls_io_name)scl, 1);
|
||||||
|
tls_gpio_write((enum tls_io_name)sda, 1);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This function sets the sda pin.
|
||||||
|
*
|
||||||
|
* @param w60x config class.
|
||||||
|
* @param The sda pin state.
|
||||||
|
*/
|
||||||
|
static void w60x_set_sda(void *data, rt_int32_t state)
|
||||||
|
{
|
||||||
|
struct w60x_soft_i2c_config* cfg = (struct w60x_soft_i2c_config*)data;
|
||||||
|
rt_int16_t sda;
|
||||||
|
|
||||||
|
sda = wm_get_pin(cfg->sda);
|
||||||
|
|
||||||
|
if (state)
|
||||||
|
{
|
||||||
|
tls_gpio_cfg((enum tls_io_name)sda, WM_GPIO_DIR_INPUT, WM_GPIO_ATTR_PULLHIGH);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
tls_gpio_cfg((enum tls_io_name)sda, WM_GPIO_DIR_OUTPUT, WM_GPIO_ATTR_FLOATING);
|
||||||
|
tls_gpio_write((enum tls_io_name)sda, 0);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This function sets the scl pin.
|
||||||
|
*
|
||||||
|
* @param w60x config class.
|
||||||
|
* @param The scl pin state.
|
||||||
|
*/
|
||||||
|
static void w60x_set_scl(void *data, rt_int32_t state)
|
||||||
|
{
|
||||||
|
struct w60x_soft_i2c_config* cfg = (struct w60x_soft_i2c_config*)data;
|
||||||
|
rt_int16_t scl;
|
||||||
|
|
||||||
|
scl = wm_get_pin(cfg->scl);
|
||||||
|
|
||||||
|
if (state)
|
||||||
|
{
|
||||||
|
tls_gpio_cfg((enum tls_io_name)scl, WM_GPIO_DIR_INPUT, WM_GPIO_ATTR_PULLHIGH);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
tls_gpio_cfg((enum tls_io_name)scl, WM_GPIO_DIR_OUTPUT, WM_GPIO_ATTR_FLOATING);
|
||||||
|
tls_gpio_write((enum tls_io_name)scl, 0);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This function gets the sda pin state.
|
||||||
|
*
|
||||||
|
* @param The sda pin state.
|
||||||
|
*/
|
||||||
|
static rt_int32_t w60x_get_sda(void *data)
|
||||||
|
{
|
||||||
|
struct w60x_soft_i2c_config* cfg = (struct w60x_soft_i2c_config*)data;
|
||||||
|
rt_int16_t sda;
|
||||||
|
|
||||||
|
sda = wm_get_pin(cfg->sda);
|
||||||
|
|
||||||
|
return tls_gpio_read((enum tls_io_name)sda);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This function gets the scl pin state.
|
||||||
|
*
|
||||||
|
* @param The scl pin state.
|
||||||
|
*/
|
||||||
|
static rt_int32_t w60x_get_scl(void *data)
|
||||||
|
{
|
||||||
|
struct w60x_soft_i2c_config* cfg = (struct w60x_soft_i2c_config*)data;
|
||||||
|
rt_int16_t scl;
|
||||||
|
|
||||||
|
scl = wm_get_pin(cfg->scl);
|
||||||
|
|
||||||
|
return tls_gpio_read((enum tls_io_name)scl);
|
||||||
|
}
|
||||||
|
/**
|
||||||
|
* The time delay function.
|
||||||
|
*
|
||||||
|
* @param microseconds.
|
||||||
|
*/
|
||||||
|
static void w60x_udelay(rt_uint32_t us)
|
||||||
|
{
|
||||||
|
rt_uint32_t ticks;
|
||||||
|
rt_uint32_t told, tnow, tcnt = 0;
|
||||||
|
rt_uint32_t reload = SysTick->LOAD;
|
||||||
|
|
||||||
|
ticks = us * reload / (1000000 / RT_TICK_PER_SECOND);
|
||||||
|
told = SysTick->VAL;
|
||||||
|
while (1)
|
||||||
|
{
|
||||||
|
tnow = SysTick->VAL;
|
||||||
|
if (tnow != told)
|
||||||
|
{
|
||||||
|
if (tnow < told)
|
||||||
|
{
|
||||||
|
tcnt += told - tnow;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
tcnt += reload - tnow + told;
|
||||||
|
}
|
||||||
|
told = tnow;
|
||||||
|
if (tcnt >= ticks)
|
||||||
|
{
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct rt_i2c_bit_ops w60x_bit_ops_default =
|
||||||
|
{
|
||||||
|
.data = RT_NULL,
|
||||||
|
.set_sda = w60x_set_sda,
|
||||||
|
.set_scl = w60x_set_scl,
|
||||||
|
.get_sda = w60x_get_sda,
|
||||||
|
.get_scl = w60x_get_scl,
|
||||||
|
.udelay = w60x_udelay,
|
||||||
|
.delay_us = 1,
|
||||||
|
.timeout = 100
|
||||||
|
};
|
||||||
|
|
||||||
|
/**
|
||||||
|
* if i2c is locked, this function will unlock it
|
||||||
|
*
|
||||||
|
* @param w60x config class
|
||||||
|
*
|
||||||
|
* @return RT_EOK indicates successful unlock.
|
||||||
|
*/
|
||||||
|
static rt_err_t w60x_i2c_bus_unlock(const struct w60x_soft_i2c_config *cfg)
|
||||||
|
{
|
||||||
|
rt_int32_t i = 0;
|
||||||
|
|
||||||
|
if (PIN_LOW == rt_pin_read(cfg->sda))
|
||||||
|
{
|
||||||
|
while (i++ < 9)
|
||||||
|
{
|
||||||
|
rt_pin_write(cfg->scl, PIN_HIGH);
|
||||||
|
w60x_udelay(100);
|
||||||
|
rt_pin_write(cfg->scl, PIN_LOW);
|
||||||
|
w60x_udelay(100);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (PIN_LOW == rt_pin_read(cfg->sda))
|
||||||
|
{
|
||||||
|
return -RT_ERROR;
|
||||||
|
}
|
||||||
|
|
||||||
|
return RT_EOK;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* I2C initialization function */
|
||||||
|
int rt_soft_i2c_init(void)
|
||||||
|
{
|
||||||
|
rt_size_t obj_num = sizeof(i2c_obj) / sizeof(struct w60x_i2c);
|
||||||
|
rt_err_t result;
|
||||||
|
|
||||||
|
for (int i = 0; i < obj_num; i++)
|
||||||
|
{
|
||||||
|
i2c_obj[i].ops = w60x_bit_ops_default;
|
||||||
|
i2c_obj[i].ops.data = (void*)&soft_i2c_config[i];
|
||||||
|
i2c_obj[i].i2c2_bus.priv = &i2c_obj[i].ops;
|
||||||
|
w60x_i2c_gpio_init(&i2c_obj[i]);
|
||||||
|
result = rt_i2c_bit_add_bus(&i2c_obj[i].i2c2_bus, soft_i2c_config[i].bus_name);
|
||||||
|
RT_ASSERT(result == RT_EOK);
|
||||||
|
w60x_i2c_bus_unlock(&soft_i2c_config[i]);
|
||||||
|
|
||||||
|
LOG_D("software simulation %s init done, pin scl: %d, pin sda %d",
|
||||||
|
soft_i2c_config[i].bus_name,
|
||||||
|
soft_i2c_config[i].scl,
|
||||||
|
soft_i2c_config[i].sda);
|
||||||
|
}
|
||||||
|
|
||||||
|
return RT_EOK;
|
||||||
|
}
|
||||||
|
INIT_DEVICE_EXPORT(rt_soft_i2c_init);
|
||||||
|
|
||||||
|
#endif /* BSP_USING_SOFT_I2C */
|
||||||
|
|
@ -0,0 +1,61 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2006-2019, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2019-03-22 balanceTWK first version
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __DRV_SOFT_I2C__
|
||||||
|
#define __DRV_SOFT_I2C__
|
||||||
|
|
||||||
|
#include <rtthread.h>
|
||||||
|
#include <rthw.h>
|
||||||
|
#include <rtdevice.h>
|
||||||
|
|
||||||
|
/* w60x config class */
|
||||||
|
struct w60x_soft_i2c_config
|
||||||
|
{
|
||||||
|
rt_uint8_t scl;
|
||||||
|
rt_uint8_t sda;
|
||||||
|
const char *bus_name;
|
||||||
|
};
|
||||||
|
/* w60x i2c dirver class */
|
||||||
|
struct w60x_i2c
|
||||||
|
{
|
||||||
|
struct rt_i2c_bit_ops ops;
|
||||||
|
struct rt_i2c_bus_device i2c2_bus;
|
||||||
|
};
|
||||||
|
|
||||||
|
#ifdef BSP_USING_SOFT_I2C1
|
||||||
|
#define I2C1_BUS_CONFIG \
|
||||||
|
{ \
|
||||||
|
.scl = SOFT_I2C1_SCL_PIN, \
|
||||||
|
.sda = SOFT_I2C1_SDA_PIN, \
|
||||||
|
.bus_name = "i2c1soft", \
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef BSP_USING_SOFT_I2C2
|
||||||
|
#define I2C2_BUS_CONFIG \
|
||||||
|
{ \
|
||||||
|
.scl = SOFT_I2C2_SCL_PIN, \
|
||||||
|
.sda = SOFT_I2C2_SDA_PIN, \
|
||||||
|
.bus_name = "i2c2soft", \
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef BSP_USING_SOFT_I2C3
|
||||||
|
#define I2C3_BUS_CONFIG \
|
||||||
|
{ \
|
||||||
|
.scl = SOFT_I2C3_SCL_PIN, \
|
||||||
|
.sda = SOFT_I2C3_SDA_PIN, \
|
||||||
|
.bus_name = "i2c3soft", \
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
int rt_hw_i2c_init(void);
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -10,6 +10,7 @@
|
||||||
|
|
||||||
#include <rtthread.h>
|
#include <rtthread.h>
|
||||||
#include <rtdevice.h>
|
#include <rtdevice.h>
|
||||||
|
#include "board.h"
|
||||||
#include "wm_hostspi.h"
|
#include "wm_hostspi.h"
|
||||||
#include "wm_spi_hal.h"
|
#include "wm_spi_hal.h"
|
||||||
#include "wm_io.h"
|
#include "wm_io.h"
|
||||||
|
|
@ -92,10 +93,13 @@ static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message *
|
||||||
|
|
||||||
rt_int32_t length = 0;
|
rt_int32_t length = 0;
|
||||||
rt_int32_t remain_length = message->length;
|
rt_int32_t remain_length = message->length;
|
||||||
|
rt_int32_t int_status;
|
||||||
|
|
||||||
|
tls_irq_disable(SPI0_INT);
|
||||||
|
|
||||||
length = spi_fill_txfifo(&tls_transfer, remain_length);
|
length = spi_fill_txfifo(&tls_transfer, remain_length);
|
||||||
spi_set_sclk_length(length * 8, 0);
|
spi_set_sclk_length(length * 8, 0);
|
||||||
if (message->cs_take)
|
if (message->cs_take && cs)
|
||||||
{
|
{
|
||||||
tls_gpio_write((enum tls_io_name)cs->pin, 0);
|
tls_gpio_write((enum tls_io_name)cs->pin, 0);
|
||||||
}
|
}
|
||||||
|
|
@ -112,7 +116,7 @@ static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message *
|
||||||
{
|
{
|
||||||
while (spi_i2s_get_busy_status() == 1)
|
while (spi_i2s_get_busy_status() == 1)
|
||||||
;
|
;
|
||||||
if (message->cs_release)
|
if (message->cs_release && cs)
|
||||||
{
|
{
|
||||||
tls_gpio_write((enum tls_io_name)cs->pin, 1);
|
tls_gpio_write((enum tls_io_name)cs->pin, 1);
|
||||||
}
|
}
|
||||||
|
|
@ -129,10 +133,15 @@ static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message *
|
||||||
|
|
||||||
while (spi_i2s_get_busy_status() == 1)
|
while (spi_i2s_get_busy_status() == 1)
|
||||||
;
|
;
|
||||||
if (message->cs_release)
|
if (message->cs_release && cs)
|
||||||
{
|
{
|
||||||
tls_gpio_write((enum tls_io_name)cs->pin, 1);
|
tls_gpio_write((enum tls_io_name)cs->pin, 1);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
int_status = spi_get_int_status();
|
||||||
|
spi_clear_int_status(int_status);
|
||||||
|
tls_irq_enable(SPI0_INT);
|
||||||
|
|
||||||
return message->length - remain_length;
|
return message->length - remain_length;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
@ -193,7 +202,11 @@ int wm_hw_spi_bus_init(void)
|
||||||
}
|
}
|
||||||
|
|
||||||
wm_spi_bus.parent.user_data = &spi;
|
wm_spi_bus.parent.user_data = &spi;
|
||||||
|
#ifdef WM_SPI_BUS_NAME
|
||||||
|
rt_spi_bus_register(&wm_spi_bus, WM_SPI_BUS_NAME, &wm_spi_ops);
|
||||||
|
#else
|
||||||
rt_spi_bus_register(&wm_spi_bus, "spi0", &wm_spi_ops);
|
rt_spi_bus_register(&wm_spi_bus, "spi0", &wm_spi_ops);
|
||||||
|
#endif
|
||||||
|
|
||||||
return RT_EOK;
|
return RT_EOK;
|
||||||
}
|
}
|
||||||
|
|
|
||||||
|
|
@ -1,33 +0,0 @@
|
||||||
/*
|
|
||||||
* Copyright (c) 2019 Winner Microelectronics Co., Ltd.
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: Apache-2.0
|
|
||||||
*
|
|
||||||
* Change Logs:
|
|
||||||
* Date Author Notes
|
|
||||||
* 2018-11-12 fanwenl 1st version
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <rtthread.h>
|
|
||||||
#include <rtdevice.h>
|
|
||||||
|
|
||||||
#ifdef BSP_USING_FLASH
|
|
||||||
#include "drv_spi.h"
|
|
||||||
#include "string.h"
|
|
||||||
#include "spi_flash.h"
|
|
||||||
#include "spi_flash_sfud.h"
|
|
||||||
|
|
||||||
int wm_nor_flash_init(void)
|
|
||||||
{
|
|
||||||
rt_spi_flash_device_t spi_device;
|
|
||||||
|
|
||||||
wm_spi_bus_attach_device(SPI_Flash_BUS_NAME, "norspi", SPI_Flash_CS_PIN);
|
|
||||||
spi_device = rt_sfud_flash_probe("flash0", "norspi");
|
|
||||||
if (spi_device == RT_NULL)
|
|
||||||
{
|
|
||||||
return -RT_ERROR;
|
|
||||||
}
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
INIT_DEVICE_EXPORT(wm_nor_flash_init);
|
|
||||||
#endif
|
|
||||||
|
|
@ -10,6 +10,7 @@
|
||||||
|
|
||||||
#include <rtthread.h>
|
#include <rtthread.h>
|
||||||
#include <rtdevice.h>
|
#include <rtdevice.h>
|
||||||
|
#include "board.h"
|
||||||
#include "wm_io.h"
|
#include "wm_io.h"
|
||||||
#include "wm_uart.h"
|
#include "wm_uart.h"
|
||||||
#include "wm_gpio_afsel.h"
|
#include "wm_gpio_afsel.h"
|
||||||
|
|
|
||||||
|
|
@ -14,8 +14,10 @@
|
||||||
#include "wm_wifi.h"
|
#include "wm_wifi.h"
|
||||||
#include "drv_wifi.h"
|
#include "drv_wifi.h"
|
||||||
|
|
||||||
#define DBG_TAG "WIFI"
|
#define DBG_ENABLE
|
||||||
#define DBG_LVL DBG_INFO
|
#define DBG_LEVEL DBG_INFO
|
||||||
|
#define DBG_SECTION_NAME "WIFI"
|
||||||
|
#define DBG_COLOR
|
||||||
#include <rtdbg.h>
|
#include <rtdbg.h>
|
||||||
|
|
||||||
#include "wm_ram_config.h"
|
#include "wm_ram_config.h"
|
||||||
|
|
|
||||||
|
|
@ -7,9 +7,9 @@ define symbol __ICFEDIT_intvec_start__ = 0x08010100;
|
||||||
/* rom 959K */
|
/* rom 959K */
|
||||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08010100;
|
define symbol __ICFEDIT_region_ROM_start__ = 0x08010100;
|
||||||
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
|
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
|
||||||
/* ram 224k */
|
/* ram 160k */
|
||||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||||
define symbol __ICFEDIT_region_RAM_end__ = 0x2003C000;
|
define symbol __ICFEDIT_region_RAM_end__ = 0x20028000;
|
||||||
/*-Sizes-*/
|
/*-Sizes-*/
|
||||||
define symbol __ICFEDIT_size_cstack__ = 0xc00;
|
define symbol __ICFEDIT_size_cstack__ = 0xc00;
|
||||||
define symbol __ICFEDIT_size_heap__ = 0x1A000;
|
define symbol __ICFEDIT_size_heap__ = 0x1A000;
|
||||||
|
|
|
||||||
|
|
@ -8,8 +8,8 @@
|
||||||
|
|
||||||
MEMORY
|
MEMORY
|
||||||
{
|
{
|
||||||
FLASH (rx) : ORIGIN = 0x8010100, LENGTH = 959K /* 960K-256B */
|
FLASH (rx) : ORIGIN = 0x8010100, LENGTH = 959K /* 960K-256B */
|
||||||
RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x3C000 /* 240K */
|
RAM (rw) : ORIGIN = 0x20000000, LENGTH = 0x28000 /* 160K */
|
||||||
}
|
}
|
||||||
|
|
||||||
/* Linker script to place sections and symbol values. Should be used together
|
/* Linker script to place sections and symbol values. Should be used together
|
||||||
|
|
@ -78,6 +78,12 @@ SECTIONS
|
||||||
KEEP(*(SORT(.rti_fn*)))
|
KEEP(*(SORT(.rti_fn*)))
|
||||||
__rt_init_end = .;
|
__rt_init_end = .;
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
__rtatcmdtab_start = .;
|
||||||
|
KEEP(*(RtAtCmdTab))
|
||||||
|
__rtatcmdtab_end = .;
|
||||||
|
. = ALIGN(4);
|
||||||
|
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
KEEP(*(.init))
|
KEEP(*(.init))
|
||||||
KEEP(*(.fini))
|
KEEP(*(.fini))
|
||||||
|
|
|
||||||
|
|
@ -3,12 +3,13 @@
|
||||||
; *************************************************************
|
; *************************************************************
|
||||||
|
|
||||||
LR_IROM1 0x08010100 0x000EFEFF { ; load region size_region
|
LR_IROM1 0x08010100 0x000EFEFF { ; load region size_region
|
||||||
ER_IROM1 0x08010100 0x000EFEFF { ; load address = execution address
|
ER_IROM1 0x08010100 0x000EFEFF { ; load address = execution address
|
||||||
*.o (RESET, +First)
|
*.o (RESET, +First)
|
||||||
*(InRoot$$Sections)
|
*(InRoot$$Sections)
|
||||||
.ANY (+RO)
|
.ANY (+RO)
|
||||||
|
.ANY (+XO)
|
||||||
}
|
}
|
||||||
RW_IRAM1 0x20000000 0x0003C000 { ; RW data
|
RW_IRAM1 0x20000000 0x00028000 { ; RW data
|
||||||
.ANY (+RW +ZI)
|
.ANY (+RW +ZI)
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,36 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2006-2019, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2019-06-01 Ernest the first version
|
||||||
|
*/
|
||||||
|
#ifndef __PIN_CONFIG_H__
|
||||||
|
#define __PIN_CONFIG_H__
|
||||||
|
|
||||||
|
// UART
|
||||||
|
#define WM_UART2_RX_PIN 1 // PB19 : UART2_RX (W601)
|
||||||
|
#define WM_UART2_TX_PIN 2 // PB20 : UART2_TX (W601)
|
||||||
|
|
||||||
|
#define WM_UART1_RX_PIN 31 // PB11 : UART1_RX (W600)
|
||||||
|
#define WM_UART1_TX_PIN 32 // PB12 : UART1_TX (W600)
|
||||||
|
|
||||||
|
// spi
|
||||||
|
#define WM_SPI_CK_PIN 53 // PB27 : SPI_SCK
|
||||||
|
#define WM_SPI_DI_PIN 55 // PB1 : SPI_MISO
|
||||||
|
#define WM_SPI_DO_PIN 56 // PB2 : SPI_MOSI
|
||||||
|
|
||||||
|
// i2c
|
||||||
|
#define WM_I2C_SCL_PIN 18
|
||||||
|
#define WM_I2C_DAT_PIN 19
|
||||||
|
|
||||||
|
// soft i2c
|
||||||
|
#define SOFT_I2C1_SCL_PIN 23 // PA0 : I2C1_SCL
|
||||||
|
#define SOFT_I2C1_SDA_PIN 24 // PA1 : I2C1_SDA
|
||||||
|
#define SOFT_I2C2_SCL_PIN 25 // PA2 : I2C2_SCL
|
||||||
|
#define SOFT_I2C2_SDA_PIN 24 // PA1 : I2C2_SDA
|
||||||
|
|
||||||
|
#endif /* __PIN_CONFIG_H__ */
|
||||||
|
|
||||||
|
|
@ -0,0 +1,15 @@
|
||||||
|
Import('rtconfig')
|
||||||
|
from building import *
|
||||||
|
|
||||||
|
cwd = GetCurrentDir()
|
||||||
|
src = []
|
||||||
|
path = [cwd]
|
||||||
|
|
||||||
|
src += ['oneshot.c']
|
||||||
|
|
||||||
|
if GetDepend(['WM_USING_ONESHOT_DEMO']):
|
||||||
|
src += ['oneshot_demo.c']
|
||||||
|
|
||||||
|
group = DefineGroup('oneshot', src, depend = ['WM_USING_ONESHOT'], CPPPATH = path)
|
||||||
|
|
||||||
|
Return('group')
|
||||||
|
|
@ -0,0 +1,52 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2006-2018, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2019-01-25 winner micro
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <rtthread.h>
|
||||||
|
#include "oneshot.h"
|
||||||
|
#include "wm_wifi_oneshot.h"
|
||||||
|
#include "wm_wifi.h"
|
||||||
|
|
||||||
|
/* start oneshot */
|
||||||
|
int wm_oneshot_start(WM_ONESHOT_MODE mode, wm_oneshot_callback callback)
|
||||||
|
{
|
||||||
|
tls_wifi_oneshot_callback_register(callback);
|
||||||
|
if(mode == WM_UDP)
|
||||||
|
{
|
||||||
|
tls_wifi_set_oneshot_config_mode(0);
|
||||||
|
}
|
||||||
|
else if (mode == WM_APSOCKET)
|
||||||
|
{
|
||||||
|
tls_wifi_set_oneshot_config_mode(1);
|
||||||
|
}
|
||||||
|
else if(mode == WM_APWEB)
|
||||||
|
{
|
||||||
|
tls_wifi_set_oneshot_config_mode(2);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
tls_wifi_set_oneshot_flag(1);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* stop oneshot */
|
||||||
|
int wm_oneshot_stop(void)
|
||||||
|
{
|
||||||
|
tls_wifi_oneshot_callback_delete();
|
||||||
|
tls_wifi_set_oneshot_flag(0);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* get status */
|
||||||
|
int wm_oneshot_get(void)
|
||||||
|
{
|
||||||
|
return tls_wifi_get_oneshot_flag();
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,27 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2006-2018, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2019-01-25 winner micro
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef DRV_ONESHOT_H__
|
||||||
|
#define DRV_ONESHOT_H__
|
||||||
|
|
||||||
|
typedef enum{
|
||||||
|
WM_UDP,
|
||||||
|
WM_APSOCKET,
|
||||||
|
WM_APWEB
|
||||||
|
}WM_ONESHOT_MODE;
|
||||||
|
|
||||||
|
|
||||||
|
typedef void (*wm_oneshot_callback)(int state, unsigned char *ssid, unsigned char *key);
|
||||||
|
|
||||||
|
extern int wm_oneshot_start(WM_ONESHOT_MODE mode, wm_oneshot_callback callback);
|
||||||
|
extern int wm_oneshot_stop(void);
|
||||||
|
extern int wm_oneshot_get(void);
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,149 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2006-2018, RT-Thread Development Team
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*
|
||||||
|
* Change Logs:
|
||||||
|
* Date Author Notes
|
||||||
|
* 2019-01-25 tyx add w600
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <rtthread.h>
|
||||||
|
#include <rtdevice.h>
|
||||||
|
#include "oneshot.h"
|
||||||
|
|
||||||
|
#define NET_READY_TIME_OUT (rt_tick_from_millisecond(30 * 1000))
|
||||||
|
|
||||||
|
struct join_info
|
||||||
|
{
|
||||||
|
char ssid[64];
|
||||||
|
char passwd[64];
|
||||||
|
};
|
||||||
|
|
||||||
|
static int rt_wlan_device_connetct(char *ssid, char *passwd)
|
||||||
|
{
|
||||||
|
int result = RT_EOK;
|
||||||
|
rt_uint8_t time_cnt = 0;
|
||||||
|
|
||||||
|
result = rt_wlan_connect(ssid, passwd);
|
||||||
|
if (result != RT_EOK)
|
||||||
|
{
|
||||||
|
rt_kprintf("\nconnect ssid %s error:%d!\n", ssid, result);
|
||||||
|
return result;
|
||||||
|
};
|
||||||
|
|
||||||
|
do
|
||||||
|
{
|
||||||
|
rt_thread_mdelay(1000);
|
||||||
|
time_cnt ++;
|
||||||
|
if (rt_wlan_is_ready())
|
||||||
|
{
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
while (time_cnt <= (NET_READY_TIME_OUT / 1000));
|
||||||
|
|
||||||
|
if (time_cnt <= (NET_READY_TIME_OUT / 1000))
|
||||||
|
{
|
||||||
|
rt_kprintf("networking ready!\n");
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
rt_kprintf("wait ip got timeout!\n");
|
||||||
|
result = -RT_ETIMEOUT;
|
||||||
|
}
|
||||||
|
|
||||||
|
return result;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void join_wifi_thread(void *param)
|
||||||
|
{
|
||||||
|
struct join_info *info = param;
|
||||||
|
|
||||||
|
rt_kprintf("connect wifi:%s\n", info->ssid);
|
||||||
|
if (rt_strlen(info->passwd) > 0)
|
||||||
|
{
|
||||||
|
rt_wlan_device_connetct(info->ssid, info->passwd);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
rt_wlan_device_connetct(info->ssid, RT_NULL);
|
||||||
|
}
|
||||||
|
rt_free(info);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void wm_oneshot_result_cb(int state, unsigned char *ssid, unsigned char *passwd)
|
||||||
|
{
|
||||||
|
rt_thread_t tid;
|
||||||
|
struct join_info *info;
|
||||||
|
|
||||||
|
if (state != 0)
|
||||||
|
{
|
||||||
|
rt_kprintf("Receive wifi info timeout(%d). exit!\n", state);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
if (ssid == RT_NULL)
|
||||||
|
{
|
||||||
|
rt_kprintf("SSID is NULL. exit!\n");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
rt_kprintf("Receive ssid:%s passwd:%s\n", ssid == RT_NULL ? "" : ssid, passwd == RT_NULL ? "" : passwd);
|
||||||
|
info = rt_malloc(sizeof(struct join_info));
|
||||||
|
if (info == RT_NULL)
|
||||||
|
{
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
rt_memset(info, 0, sizeof(struct join_info));
|
||||||
|
rt_strncpy(info->ssid, ssid, sizeof(info->ssid));
|
||||||
|
if (passwd)
|
||||||
|
{
|
||||||
|
rt_strncpy(info->passwd, passwd, sizeof(info->passwd));
|
||||||
|
}
|
||||||
|
tid = rt_thread_create("join", join_wifi_thread, info, 2048, 22, 20);
|
||||||
|
if (tid == RT_NULL)
|
||||||
|
{
|
||||||
|
rt_free(info);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
rt_thread_startup(tid);
|
||||||
|
}
|
||||||
|
|
||||||
|
void oneshot_demo(int argc, char *argv[])
|
||||||
|
{
|
||||||
|
WM_ONESHOT_MODE mode = WM_UDP;
|
||||||
|
|
||||||
|
if (argc > 2)
|
||||||
|
{
|
||||||
|
rt_kprintf("use: %s [web]", __FUNCTION__);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
if (argc == 2)
|
||||||
|
{
|
||||||
|
if (rt_strcmp("web", argv[1]) == 0)
|
||||||
|
{
|
||||||
|
mode = WM_APWEB;
|
||||||
|
}
|
||||||
|
else if(rt_strcmp("udp", argv[1]) == 0)
|
||||||
|
{
|
||||||
|
mode = WM_UDP;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
rt_kprintf("use: %s [web]", __FUNCTION__);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (wm_oneshot_start(mode, wm_oneshot_result_cb) == 0)
|
||||||
|
{
|
||||||
|
rt_kprintf("oneshot start...\n");
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
rt_kprintf("oneshot start failed\n");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef RT_USING_FINSH
|
||||||
|
#include "finsh.h"
|
||||||
|
MSH_CMD_EXPORT(oneshot_demo, oneshot demo);
|
||||||
|
#endif
|
||||||
|
|
@ -221,7 +221,6 @@
|
||||||
<state>__inline__=inline</state>
|
<state>__inline__=inline</state>
|
||||||
<state>RT_USING_DLIBC</state>
|
<state>RT_USING_DLIBC</state>
|
||||||
<state>_DLIB_FILE_DESCRIPTOR</state>
|
<state>_DLIB_FILE_DESCRIPTOR</state>
|
||||||
<state>_DLIB_THREAD_SUPPORT</state>
|
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>CCPreprocFile</name>
|
<name>CCPreprocFile</name>
|
||||||
|
|
@ -350,6 +349,7 @@
|
||||||
<state>$PROJ_DIR$\..\..\components\net\sal_socket\include\socket</state>
|
<state>$PROJ_DIR$\..\..\components\net\sal_socket\include\socket</state>
|
||||||
<state>$PROJ_DIR$\..\..\components\net\lwip-2.0.2\src\include\ipv4</state>
|
<state>$PROJ_DIR$\..\..\components\net\lwip-2.0.2\src\include\ipv4</state>
|
||||||
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Boot\gcc</state>
|
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Boot\gcc</state>
|
||||||
|
<state>$PROJ_DIR$\oneshot</state>
|
||||||
<state>$PROJ_DIR$\..\..\components\net\sal_socket\include</state>
|
<state>$PROJ_DIR$\..\..\components\net\sal_socket\include</state>
|
||||||
<state>$PROJ_DIR$\..\..\include</state>
|
<state>$PROJ_DIR$\..\..\include</state>
|
||||||
<state>$PROJ_DIR$\..\..\components\net\lwip-2.0.2\src\include\netif</state>
|
<state>$PROJ_DIR$\..\..\components\net\lwip-2.0.2\src\include\netif</state>
|
||||||
|
|
@ -368,9 +368,11 @@
|
||||||
<state>$PROJ_DIR$\.</state>
|
<state>$PROJ_DIR$\.</state>
|
||||||
<state>$PROJ_DIR$\packages\wm_libraries-latest\Include\OS</state>
|
<state>$PROJ_DIR$\packages\wm_libraries-latest\Include\OS</state>
|
||||||
<state>$PROJ_DIR$\..\..\components\utilities\ulog</state>
|
<state>$PROJ_DIR$\..\..\components\utilities\ulog</state>
|
||||||
<state>$PROJ_DIR$\..\..\components\dfs\include</state>
|
|
||||||
<state>$PROJ_DIR$\packages\wm_libraries-latest\Include\Platform</state>
|
|
||||||
<state>$PROJ_DIR$\..\..\libcpu\arm\cortex-m3</state>
|
<state>$PROJ_DIR$\..\..\libcpu\arm\cortex-m3</state>
|
||||||
|
<state>$PROJ_DIR$\packages\netutils-v1.1.0\ntp</state>
|
||||||
|
<state>$PROJ_DIR$\packages\wm_libraries-latest\Include\Platform</state>
|
||||||
|
<state>$PROJ_DIR$\..\..\components\drivers\hwcrypto</state>
|
||||||
|
<state>$PROJ_DIR$\..\..\components\dfs\include</state>
|
||||||
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Inc</state>
|
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Inc</state>
|
||||||
<state>$PROJ_DIR$\..\..\components\net\sal_socket\include\socket\sys_socket</state>
|
<state>$PROJ_DIR$\..\..\components\net\sal_socket\include\socket\sys_socket</state>
|
||||||
<state>$PROJ_DIR$\..\..\components\net\lwip-2.0.2\src\include</state>
|
<state>$PROJ_DIR$\..\..\components\net\lwip-2.0.2\src\include</state>
|
||||||
|
|
@ -379,6 +381,7 @@
|
||||||
<state>$PROJ_DIR$\packages\wm_libraries-latest\Include\WiFi</state>
|
<state>$PROJ_DIR$\packages\wm_libraries-latest\Include\WiFi</state>
|
||||||
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto</state>
|
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto</state>
|
||||||
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Drivers\spi</state>
|
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Drivers\spi</state>
|
||||||
|
<state>$PROJ_DIR$\..\..\components\drivers\spi</state>
|
||||||
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\math</state>
|
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\math</state>
|
||||||
<state>$PROJ_DIR$\applications</state>
|
<state>$PROJ_DIR$\applications</state>
|
||||||
<state>$PROJ_DIR$\..\..\components\net\netdev\include</state>
|
<state>$PROJ_DIR$\..\..\components\net\netdev\include</state>
|
||||||
|
|
@ -774,7 +777,7 @@
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>IlinkMapFile</name>
|
<name>IlinkMapFile</name>
|
||||||
<state>0</state>
|
<state>1</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>IlinkLogFile</name>
|
<name>IlinkLogFile</name>
|
||||||
|
|
@ -1149,7 +1152,7 @@
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>GEndianModeBE</name>
|
<name>GEndianModeBE</name>
|
||||||
<state>0</state>
|
<state>1</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>OGBufferedTerminalOutput</name>
|
<name>OGBufferedTerminalOutput</name>
|
||||||
|
|
@ -1180,7 +1183,7 @@
|
||||||
<option>
|
<option>
|
||||||
<name>GBECoreSlave</name>
|
<name>GBECoreSlave</name>
|
||||||
<version>26</version>
|
<version>26</version>
|
||||||
<state>1</state>
|
<state>38</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>OGUseCmsis</name>
|
<name>OGUseCmsis</name>
|
||||||
|
|
@ -1197,7 +1200,7 @@
|
||||||
<option>
|
<option>
|
||||||
<name>CoreVariant</name>
|
<name>CoreVariant</name>
|
||||||
<version>26</version>
|
<version>26</version>
|
||||||
<state>0</state>
|
<state>38</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>GFPUDeviceSlave</name>
|
<name>GFPUDeviceSlave</name>
|
||||||
|
|
@ -1220,7 +1223,7 @@
|
||||||
<option>
|
<option>
|
||||||
<name>GFPUCoreSlave2</name>
|
<name>GFPUCoreSlave2</name>
|
||||||
<version>26</version>
|
<version>26</version>
|
||||||
<state>0</state>
|
<state>38</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>OGCMSISPackSelectDevice</name>
|
<name>OGCMSISPackSelectDevice</name>
|
||||||
|
|
@ -1285,7 +1288,6 @@
|
||||||
<state>__inline__=inline</state>
|
<state>__inline__=inline</state>
|
||||||
<state>RT_USING_DLIBC</state>
|
<state>RT_USING_DLIBC</state>
|
||||||
<state>_DLIB_FILE_DESCRIPTOR</state>
|
<state>_DLIB_FILE_DESCRIPTOR</state>
|
||||||
<state>_DLIB_THREAD_SUPPORT</state>
|
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>CCPreprocFile</name>
|
<name>CCPreprocFile</name>
|
||||||
|
|
@ -1374,7 +1376,7 @@
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>CCSignedPlainChar</name>
|
<name>CCSignedPlainChar</name>
|
||||||
<state>1</state>
|
<state>0</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>CCRequirePrototypes</name>
|
<name>CCRequirePrototypes</name>
|
||||||
|
|
@ -1414,6 +1416,7 @@
|
||||||
<state>$PROJ_DIR$\..\..\components\net\sal_socket\include\socket</state>
|
<state>$PROJ_DIR$\..\..\components\net\sal_socket\include\socket</state>
|
||||||
<state>$PROJ_DIR$\..\..\components\net\lwip-2.0.2\src\include\ipv4</state>
|
<state>$PROJ_DIR$\..\..\components\net\lwip-2.0.2\src\include\ipv4</state>
|
||||||
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Boot\gcc</state>
|
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Boot\gcc</state>
|
||||||
|
<state>$PROJ_DIR$\oneshot</state>
|
||||||
<state>$PROJ_DIR$\..\..\components\net\sal_socket\include</state>
|
<state>$PROJ_DIR$\..\..\components\net\sal_socket\include</state>
|
||||||
<state>$PROJ_DIR$\..\..\include</state>
|
<state>$PROJ_DIR$\..\..\include</state>
|
||||||
<state>$PROJ_DIR$\..\..\components\net\lwip-2.0.2\src\include\netif</state>
|
<state>$PROJ_DIR$\..\..\components\net\lwip-2.0.2\src\include\netif</state>
|
||||||
|
|
@ -1432,9 +1435,11 @@
|
||||||
<state>$PROJ_DIR$\.</state>
|
<state>$PROJ_DIR$\.</state>
|
||||||
<state>$PROJ_DIR$\packages\wm_libraries-latest\Include\OS</state>
|
<state>$PROJ_DIR$\packages\wm_libraries-latest\Include\OS</state>
|
||||||
<state>$PROJ_DIR$\..\..\components\utilities\ulog</state>
|
<state>$PROJ_DIR$\..\..\components\utilities\ulog</state>
|
||||||
<state>$PROJ_DIR$\..\..\components\dfs\include</state>
|
|
||||||
<state>$PROJ_DIR$\packages\wm_libraries-latest\Include\Platform</state>
|
|
||||||
<state>$PROJ_DIR$\..\..\libcpu\arm\cortex-m3</state>
|
<state>$PROJ_DIR$\..\..\libcpu\arm\cortex-m3</state>
|
||||||
|
<state>$PROJ_DIR$\packages\netutils-v1.1.0\ntp</state>
|
||||||
|
<state>$PROJ_DIR$\packages\wm_libraries-latest\Include\Platform</state>
|
||||||
|
<state>$PROJ_DIR$\..\..\components\drivers\hwcrypto</state>
|
||||||
|
<state>$PROJ_DIR$\..\..\components\dfs\include</state>
|
||||||
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Inc</state>
|
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Inc</state>
|
||||||
<state>$PROJ_DIR$\..\..\components\net\sal_socket\include\socket\sys_socket</state>
|
<state>$PROJ_DIR$\..\..\components\net\sal_socket\include\socket\sys_socket</state>
|
||||||
<state>$PROJ_DIR$\..\..\components\net\lwip-2.0.2\src\include</state>
|
<state>$PROJ_DIR$\..\..\components\net\lwip-2.0.2\src\include</state>
|
||||||
|
|
@ -1443,6 +1448,7 @@
|
||||||
<state>$PROJ_DIR$\packages\wm_libraries-latest\Include\WiFi</state>
|
<state>$PROJ_DIR$\packages\wm_libraries-latest\Include\WiFi</state>
|
||||||
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto</state>
|
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto</state>
|
||||||
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Drivers\spi</state>
|
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Drivers\spi</state>
|
||||||
|
<state>$PROJ_DIR$\..\..\components\drivers\spi</state>
|
||||||
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\math</state>
|
<state>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\math</state>
|
||||||
<state>$PROJ_DIR$\applications</state>
|
<state>$PROJ_DIR$\applications</state>
|
||||||
<state>$PROJ_DIR$\..\..\components\net\netdev\include</state>
|
<state>$PROJ_DIR$\..\..\components\net\netdev\include</state>
|
||||||
|
|
@ -1476,7 +1482,7 @@
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>CCOptLevelSlave</name>
|
<name>CCOptLevelSlave</name>
|
||||||
<state>1</state>
|
<state>3</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>CompilerMisraRules98</name>
|
<name>CompilerMisraRules98</name>
|
||||||
|
|
@ -1739,15 +1745,15 @@
|
||||||
<option>
|
<option>
|
||||||
<name>OOCOutputFormat</name>
|
<name>OOCOutputFormat</name>
|
||||||
<version>3</version>
|
<version>3</version>
|
||||||
<state>0</state>
|
<state>3</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>OCOutputOverride</name>
|
<name>OCOutputOverride</name>
|
||||||
<state>0</state>
|
<state>1</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>OOCOutputFile</name>
|
<name>OOCOutputFile</name>
|
||||||
<state />
|
<state>../../rtthread.bin</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>OOCCommandLineProducer</name>
|
<name>OOCCommandLineProducer</name>
|
||||||
|
|
@ -1755,7 +1761,7 @@
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>OOCObjCopyEnable</name>
|
<name>OOCObjCopyEnable</name>
|
||||||
<state>0</state>
|
<state>1</state>
|
||||||
</option>
|
</option>
|
||||||
</data>
|
</data>
|
||||||
</settings>
|
</settings>
|
||||||
|
|
@ -1778,7 +1784,7 @@
|
||||||
<archiveVersion>1</archiveVersion>
|
<archiveVersion>1</archiveVersion>
|
||||||
<data>
|
<data>
|
||||||
<prebuild />
|
<prebuild />
|
||||||
<postbuild />
|
<postbuild>cmd /c "$PROJ_DIR$\makeimg.bat"</postbuild>
|
||||||
</data>
|
</data>
|
||||||
</settings>
|
</settings>
|
||||||
<settings>
|
<settings>
|
||||||
|
|
@ -1838,7 +1844,7 @@
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>IlinkMapFile</name>
|
<name>IlinkMapFile</name>
|
||||||
<state>0</state>
|
<state>1</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>IlinkLogFile</name>
|
<name>IlinkLogFile</name>
|
||||||
|
|
@ -1862,11 +1868,11 @@
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>IlinkIcfOverride</name>
|
<name>IlinkIcfOverride</name>
|
||||||
<state>0</state>
|
<state>1</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>IlinkIcfFile</name>
|
<name>IlinkIcfFile</name>
|
||||||
<state>lnk0t.icf</state>
|
<state>$PROJ_DIR$\.\drivers\linker_scripts\link.icf</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>IlinkIcfFileSlave</name>
|
<name>IlinkIcfFileSlave</name>
|
||||||
|
|
@ -2190,6 +2196,9 @@
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\drivers\drv_uart.c</name>
|
<name>$PROJ_DIR$\drivers\drv_uart.c</name>
|
||||||
</file>
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\drivers\drv_flash.c</name>
|
||||||
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\drivers\pin_map.c</name>
|
<name>$PROJ_DIR$\drivers\pin_map.c</name>
|
||||||
</file>
|
</file>
|
||||||
|
|
@ -2200,6 +2209,18 @@
|
||||||
<name>$PROJ_DIR$\drivers\drv_pin.c</name>
|
<name>$PROJ_DIR$\drivers\drv_pin.c</name>
|
||||||
</file>
|
</file>
|
||||||
</group>
|
</group>
|
||||||
|
<group>
|
||||||
|
<name>oneshot</name>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\oneshot\oneshot.c</name>
|
||||||
|
</file>
|
||||||
|
</group>
|
||||||
|
<group>
|
||||||
|
<name>NetUtils</name>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\packages\netutils-v1.1.0\ntp\ntp.c</name>
|
||||||
|
</file>
|
||||||
|
</group>
|
||||||
<group>
|
<group>
|
||||||
<name>Libraries</name>
|
<name>Libraries</name>
|
||||||
<file>
|
<file>
|
||||||
|
|
@ -2266,13 +2287,13 @@
|
||||||
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\wm_crypto_hard.c</name>
|
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\wm_crypto_hard.c</name>
|
||||||
</file>
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\digest\hmac.c</name>
|
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\digest\wm_crypto_hmac.c</name>
|
||||||
</file>
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\digest\md2.c</name>
|
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\digest\wm_crypto_md2.c</name>
|
||||||
</file>
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\digest\md4.c</name>
|
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\digest\wm_crypto_md4.c</name>
|
||||||
</file>
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\digest\sha224.c</name>
|
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\digest\sha224.c</name>
|
||||||
|
|
@ -2281,16 +2302,16 @@
|
||||||
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\digest\sha384.c</name>
|
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\digest\sha384.c</name>
|
||||||
</file>
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\digest\sha512.c</name>
|
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\digest\wm_crypto_sha512.c</name>
|
||||||
</file>
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\keyformat\asn1.c</name>
|
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\keyformat\asn1.c</name>
|
||||||
</file>
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\keyformat\base64.c</name>
|
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\keyformat\wm_crypto_base64.c</name>
|
||||||
</file>
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\keyformat\x509.c</name>
|
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\keyformat\wm_crypto_x509.c</name>
|
||||||
</file>
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\math\pstm_mul_comba.c</name>
|
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\math\pstm_mul_comba.c</name>
|
||||||
|
|
@ -2314,7 +2335,7 @@
|
||||||
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\pubkey\pubkey.c</name>
|
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\pubkey\pubkey.c</name>
|
||||||
</file>
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\pubkey\rsa.c</name>
|
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\pubkey\wm_crypto_rsa.c</name>
|
||||||
</file>
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\symmetric\aesGCM.c</name>
|
<name>$PROJ_DIR$\packages\wm_libraries-latest\Platform\Common\crypto\symmetric\aesGCM.c</name>
|
||||||
|
|
@ -2388,12 +2409,57 @@
|
||||||
</group>
|
</group>
|
||||||
<group>
|
<group>
|
||||||
<name>DeviceDrivers</name>
|
<name>DeviceDrivers</name>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\hwcrypto\hwcrypto.c</name>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\hwcrypto\hw_symmetric.c</name>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\hwcrypto\hw_hash.c</name>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\hwcrypto\hw_rng.c</name>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\hwcrypto\hw_crc.c</name>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\hwcrypto\hw_bignum.c</name>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\hwtimer\hwtimer.c</name>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\i2c\i2c_core.c</name>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\i2c\i2c_dev.c</name>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\i2c\i2c-bit-ops.c</name>
|
||||||
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\..\..\components\drivers\misc\pin.c</name>
|
<name>$PROJ_DIR$\..\..\components\drivers\misc\pin.c</name>
|
||||||
</file>
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\misc\rt_drv_pwm.c</name>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\rtc\rtc.c</name>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\rtc\soft_rtc.c</name>
|
||||||
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\..\..\components\drivers\serial\serial.c</name>
|
<name>$PROJ_DIR$\..\..\components\drivers\serial\serial.c</name>
|
||||||
</file>
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\spi\spi_core.c</name>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\spi\spi_dev.c</name>
|
||||||
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\..\..\components\drivers\src\completion.c</name>
|
<name>$PROJ_DIR$\..\..\components\drivers\src\completion.c</name>
|
||||||
</file>
|
</file>
|
||||||
|
|
@ -2416,23 +2482,26 @@
|
||||||
<name>$PROJ_DIR$\..\..\components\drivers\src\workqueue.c</name>
|
<name>$PROJ_DIR$\..\..\components\drivers\src\workqueue.c</name>
|
||||||
</file>
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\..\..\components\drivers\wlan\wlan_cfg.c</name>
|
<name>$PROJ_DIR$\..\..\components\drivers\watchdog\watchdog.c</name>
|
||||||
</file>
|
|
||||||
<file>
|
|
||||||
<name>$PROJ_DIR$\..\..\components\drivers\wlan\wlan_cmd.c</name>
|
|
||||||
</file>
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\..\..\components\drivers\wlan\wlan_dev.c</name>
|
<name>$PROJ_DIR$\..\..\components\drivers\wlan\wlan_dev.c</name>
|
||||||
</file>
|
</file>
|
||||||
<file>
|
|
||||||
<name>$PROJ_DIR$\..\..\components\drivers\wlan\wlan_lwip.c</name>
|
|
||||||
</file>
|
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\..\..\components\drivers\wlan\wlan_mgnt.c</name>
|
<name>$PROJ_DIR$\..\..\components\drivers\wlan\wlan_mgnt.c</name>
|
||||||
</file>
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\wlan\wlan_cmd.c</name>
|
||||||
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\..\..\components\drivers\wlan\wlan_prot.c</name>
|
<name>$PROJ_DIR$\..\..\components\drivers\wlan\wlan_prot.c</name>
|
||||||
</file>
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\wlan\wlan_lwip.c</name>
|
||||||
|
</file>
|
||||||
|
<file>
|
||||||
|
<name>$PROJ_DIR$\..\..\components\drivers\wlan\wlan_cfg.c</name>
|
||||||
|
</file>
|
||||||
<file>
|
<file>
|
||||||
<name>$PROJ_DIR$\..\..\components\drivers\wlan\wlan_workqueue.c</name>
|
<name>$PROJ_DIR$\..\..\components\drivers\wlan\wlan_workqueue.c</name>
|
||||||
</file>
|
</file>
|
||||||
|
|
|
||||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
|
|
@ -89,27 +89,61 @@
|
||||||
#define RT_USING_SERIAL
|
#define RT_USING_SERIAL
|
||||||
#define RT_SERIAL_USING_DMA
|
#define RT_SERIAL_USING_DMA
|
||||||
#define RT_SERIAL_RB_BUFSZ 64
|
#define RT_SERIAL_RB_BUFSZ 64
|
||||||
|
#define RT_USING_HWTIMER
|
||||||
|
#define RT_USING_I2C
|
||||||
|
#define RT_USING_I2C_BITOPS
|
||||||
#define RT_USING_PIN
|
#define RT_USING_PIN
|
||||||
|
#define RT_USING_PWM
|
||||||
/* Using Hardware Crypto drivers */
|
#define RT_USING_RTC
|
||||||
|
#define RT_USING_SOFT_RTC
|
||||||
|
#define RTC_SYNC_USING_NTP
|
||||||
/* Using WiFi */
|
#define RTC_NTP_FIRST_SYNC_DELAY 30
|
||||||
|
#define RTC_NTP_SYNC_PERIOD 3600
|
||||||
|
#define RT_USING_SPI
|
||||||
|
#define RT_USING_WDT
|
||||||
|
#define RT_USING_HWCRYPTO
|
||||||
|
#define RT_HWCRYPTO_DEFAULT_NAME "hwcryto"
|
||||||
|
#define RT_HWCRYPTO_IV_MAX_SIZE 16
|
||||||
|
#define RT_HWCRYPTO_KEYBIT_MAX_SIZE 256
|
||||||
|
#define RT_HWCRYPTO_USING_AES
|
||||||
|
#define RT_HWCRYPTO_USING_AES_ECB
|
||||||
|
#define RT_HWCRYPTO_USING_AES_CBC
|
||||||
|
#define RT_HWCRYPTO_USING_MD5
|
||||||
|
#define RT_HWCRYPTO_USING_SHA1
|
||||||
|
#define RT_HWCRYPTO_USING_RNG
|
||||||
|
#define RT_HWCRYPTO_USING_CRC
|
||||||
|
#define RT_HWCRYPTO_USING_CRC_07
|
||||||
|
#define RT_HWCRYPTO_USING_CRC_8005
|
||||||
|
#define RT_HWCRYPTO_USING_CRC_1021
|
||||||
|
#define RT_HWCRYPTO_USING_CRC_04C11DB7
|
||||||
|
#define RT_HWCRYPTO_USING_BIGNUM
|
||||||
|
#define RT_HWCRYPTO_USING_BIGNUM_EXPTMOD
|
||||||
|
#define RT_HWCRYPTO_USING_BIGNUM_MULMOD
|
||||||
#define RT_USING_WIFI
|
#define RT_USING_WIFI
|
||||||
#define RT_WLAN_DEVICE_STA_NAME "wlan0"
|
#define RT_WLAN_DEVICE_STA_NAME "wlan0"
|
||||||
#define RT_WLAN_DEVICE_AP_NAME "wlan1"
|
#define RT_WLAN_DEVICE_AP_NAME "wlan1"
|
||||||
#define RT_WLAN_DEFAULT_PROT "lwip"
|
|
||||||
#define RT_WLAN_SCAN_WAIT_MS 10000
|
|
||||||
#define RT_WLAN_CONNECT_WAIT_MS 10000
|
|
||||||
#define RT_WLAN_SSID_MAX_LENGTH 32
|
#define RT_WLAN_SSID_MAX_LENGTH 32
|
||||||
#define RT_WLAN_PASSWORD_MAX_LENGTH 32
|
#define RT_WLAN_PASSWORD_MAX_LENGTH 32
|
||||||
|
#define RT_WLAN_DEV_EVENT_NUM 2
|
||||||
|
#define RT_WLAN_MANAGE_ENABLE
|
||||||
|
#define RT_WLAN_SCAN_WAIT_MS 10000
|
||||||
|
#define RT_WLAN_CONNECT_WAIT_MS 10000
|
||||||
#define RT_WLAN_SCAN_SORT
|
#define RT_WLAN_SCAN_SORT
|
||||||
|
#define RT_WLAN_MSH_CMD_ENABLE
|
||||||
|
#define RT_WLAN_AUTO_CONNECT_ENABLE
|
||||||
|
#define AUTO_CONNECTION_PERIOD_MS 2000
|
||||||
|
#define RT_WLAN_CFG_ENABLE
|
||||||
#define RT_WLAN_CFG_INFO_MAX 3
|
#define RT_WLAN_CFG_INFO_MAX 3
|
||||||
|
#define RT_WLAN_PROT_ENABLE
|
||||||
|
#define RT_WLAN_PROT_NAME_LEN 8
|
||||||
|
#define RT_WLAN_PROT_MAX 2
|
||||||
|
#define RT_WLAN_DEFAULT_PROT "lwip"
|
||||||
|
#define RT_WLAN_PROT_LWIP_ENABLE
|
||||||
|
#define RT_WLAN_PROT_LWIP_NAME "lwip"
|
||||||
|
#define RT_WLAN_WORK_THREAD_ENABLE
|
||||||
#define RT_WLAN_WORKQUEUE_THREAD_NAME "wlan_job"
|
#define RT_WLAN_WORKQUEUE_THREAD_NAME "wlan_job"
|
||||||
#define RT_WLAN_WORKQUEUE_THREAD_SIZE 2048
|
#define RT_WLAN_WORKQUEUE_THREAD_SIZE 2048
|
||||||
#define RT_WLAN_WORKQUEUE_THREAD_PRIO 22
|
#define RT_WLAN_WORKQUEUE_THREAD_PRIO 22
|
||||||
#define RT_WLAN_DEV_EVENT_NUM 2
|
|
||||||
|
|
||||||
/* Using USB */
|
/* Using USB */
|
||||||
|
|
||||||
|
|
@ -184,9 +218,6 @@
|
||||||
#define LWIP_NETIF_LOOPBACK 0
|
#define LWIP_NETIF_LOOPBACK 0
|
||||||
#define RT_LWIP_USING_PING
|
#define RT_LWIP_USING_PING
|
||||||
|
|
||||||
/* Modbus master and slave stack */
|
|
||||||
|
|
||||||
|
|
||||||
/* AT commands */
|
/* AT commands */
|
||||||
|
|
||||||
#define LWIP_USING_DHCPD
|
#define LWIP_USING_DHCPD
|
||||||
|
|
@ -224,6 +255,13 @@
|
||||||
|
|
||||||
/* Wiced WiFi */
|
/* Wiced WiFi */
|
||||||
|
|
||||||
|
#define PKG_USING_NETUTILS
|
||||||
|
#define PKG_NETUTILS_NTP
|
||||||
|
#define NETUTILS_NTP_TIMEZONE 8
|
||||||
|
#define NETUTILS_NTP_HOSTNAME "cn.ntp.org.cn"
|
||||||
|
#define NETUTILS_NTP_HOSTNAME2 "ntp.rt-thread.org"
|
||||||
|
#define NETUTILS_NTP_HOSTNAME3 "edu.ntp.org.cn"
|
||||||
|
#define PKG_USING_NETUTILS_V110
|
||||||
|
|
||||||
/* IoT Cloud */
|
/* IoT Cloud */
|
||||||
|
|
||||||
|
|
@ -262,8 +300,7 @@
|
||||||
/* W60x Device config */
|
/* W60x Device config */
|
||||||
|
|
||||||
#define SOC_W600_A8xx
|
#define SOC_W600_A8xx
|
||||||
|
#define W600_EV_BOARD
|
||||||
/* Hardware Drivers Config */
|
|
||||||
|
|
||||||
/* On-chip Peripheral Drivers */
|
/* On-chip Peripheral Drivers */
|
||||||
|
|
||||||
|
|
@ -272,7 +309,8 @@
|
||||||
#define BSP_USING_PIN
|
#define BSP_USING_PIN
|
||||||
#define BSP_USING_WIFI
|
#define BSP_USING_WIFI
|
||||||
|
|
||||||
/* Offboard Peripheral Drivers */
|
/* External Libraries */
|
||||||
|
|
||||||
|
#define WM_USING_ONESHOT
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
|
||||||
|
|
@ -1,4 +1,5 @@
|
||||||
import os
|
import os
|
||||||
|
import sys
|
||||||
|
|
||||||
# toolchains options
|
# toolchains options
|
||||||
ARCH='arm'
|
ARCH='arm'
|
||||||
|
|
@ -27,6 +28,15 @@ if os.getenv('RTT_EXEC_PATH'):
|
||||||
|
|
||||||
BUILD = 'debug'
|
BUILD = 'debug'
|
||||||
|
|
||||||
|
if os.path.exists(os.path.abspath('./') + '/drivers'):
|
||||||
|
gcc_linkscripts_path = 'drivers/linker_scripts/link.lds'
|
||||||
|
armcc_linkscripts_path = 'drivers/linker_scripts/link.sct'
|
||||||
|
iar_linkscripts_path = 'drivers/linker_scripts/link.icf'
|
||||||
|
else:
|
||||||
|
gcc_linkscripts_path = '../../drivers/linker_scripts/link.lds'
|
||||||
|
armcc_linkscripts_path = '../../drivers/linker_scripts/link.sct'
|
||||||
|
iar_linkscripts_path = '../../drivers/linker_scripts/link.icf'
|
||||||
|
|
||||||
if PLATFORM == 'gcc':
|
if PLATFORM == 'gcc':
|
||||||
# toolchains
|
# toolchains
|
||||||
PREFIX = 'arm-none-eabi-'
|
PREFIX = 'arm-none-eabi-'
|
||||||
|
|
@ -44,7 +54,7 @@ if PLATFORM == 'gcc':
|
||||||
DEVICE = ' -mcpu=cortex-m3 -mthumb -ffunction-sections -fdata-sections'
|
DEVICE = ' -mcpu=cortex-m3 -mthumb -ffunction-sections -fdata-sections'
|
||||||
CFLAGS = DEVICE + ' -std=gnu99 -w -fno-common -fomit-frame-pointer -fno-short-enums -fsigned-char'
|
CFLAGS = DEVICE + ' -std=gnu99 -w -fno-common -fomit-frame-pointer -fno-short-enums -fsigned-char'
|
||||||
AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb '
|
AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb '
|
||||||
LFLAGS = DEVICE + ' -lm -lgcc -lc' + ' -g --specs=nano.specs -nostartfiles -Wl,-Map=rtthread-w60x.map -Os -Wl,--gc-sections -Wl,--cref -Wl,--entry=Reset_Handler -Wl,--no-enum-size-warning -Wl,--no-wchar-size-warning -T ./drivers/linker_scripts/link.lds'
|
LFLAGS = DEVICE + ' -lm -lgcc -lc' + ' -g --specs=nano.specs -nostartfiles -Wl,-Map=rtthread-w60x.map -Os -Wl,--gc-sections -Wl,--cref -Wl,--entry=Reset_Handler -Wl,--no-enum-size-warning -Wl,--no-wchar-size-warning -T ' + gcc_linkscripts_path
|
||||||
|
|
||||||
CPATH = ''
|
CPATH = ''
|
||||||
LPATH = ''
|
LPATH = ''
|
||||||
|
|
@ -69,7 +79,7 @@ elif PLATFORM == 'armcc':
|
||||||
DEVICE = ' --cpu=Cortex-M3'
|
DEVICE = ' --cpu=Cortex-M3'
|
||||||
CFLAGS = DEVICE + ' --apcs=interwork --c99 --gnu'
|
CFLAGS = DEVICE + ' --apcs=interwork --c99 --gnu'
|
||||||
AFLAGS = DEVICE + ' --apcs=interwork '
|
AFLAGS = DEVICE + ' --apcs=interwork '
|
||||||
LFLAGS = DEVICE + ' --scatter "./drivers/linker_scripts/link.sct" --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict'
|
LFLAGS = DEVICE + ' --scatter ' + armcc_linkscripts_path + ' --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict'
|
||||||
LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib'
|
LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib'
|
||||||
|
|
||||||
EXEC_PATH += '/ARM/ARMCC/bin/'
|
EXEC_PATH += '/ARM/ARMCC/bin/'
|
||||||
|
|
@ -123,7 +133,7 @@ elif PLATFORM == 'iar':
|
||||||
else:
|
else:
|
||||||
CFLAGS += ' -Oh'
|
CFLAGS += ' -Oh'
|
||||||
|
|
||||||
LFLAGS = ' --config ./drivers/linker_scripts/link.icf'
|
LFLAGS = ' --config ' + iar_linkscripts_path
|
||||||
LFLAGS += ' --entry __iar_program_start'
|
LFLAGS += ' --entry __iar_program_start'
|
||||||
|
|
||||||
EXEC_PATH = EXEC_PATH + '/arm/bin/'
|
EXEC_PATH = EXEC_PATH + '/arm/bin/'
|
||||||
|
|
|
||||||
|
|
@ -728,7 +728,7 @@
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>IlinkMapFile</name>
|
<name>IlinkMapFile</name>
|
||||||
<state>0</state>
|
<state>1</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>IlinkLogFile</name>
|
<name>IlinkLogFile</name>
|
||||||
|
|
@ -1101,7 +1101,7 @@
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>GEndianModeBE</name>
|
<name>GEndianModeBE</name>
|
||||||
<state>0</state>
|
<state>1</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>OGBufferedTerminalOutput</name>
|
<name>OGBufferedTerminalOutput</name>
|
||||||
|
|
@ -1132,7 +1132,7 @@
|
||||||
<option>
|
<option>
|
||||||
<name>GBECoreSlave</name>
|
<name>GBECoreSlave</name>
|
||||||
<version>26</version>
|
<version>26</version>
|
||||||
<state>1</state>
|
<state>38</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>OGUseCmsis</name>
|
<name>OGUseCmsis</name>
|
||||||
|
|
@ -1149,7 +1149,7 @@
|
||||||
<option>
|
<option>
|
||||||
<name>CoreVariant</name>
|
<name>CoreVariant</name>
|
||||||
<version>26</version>
|
<version>26</version>
|
||||||
<state>0</state>
|
<state>38</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>GFPUDeviceSlave</name>
|
<name>GFPUDeviceSlave</name>
|
||||||
|
|
@ -1172,7 +1172,7 @@
|
||||||
<option>
|
<option>
|
||||||
<name>GFPUCoreSlave2</name>
|
<name>GFPUCoreSlave2</name>
|
||||||
<version>26</version>
|
<version>26</version>
|
||||||
<state>0</state>
|
<state>38</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>OGCMSISPackSelectDevice</name>
|
<name>OGCMSISPackSelectDevice</name>
|
||||||
|
|
@ -1320,7 +1320,7 @@
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>CCSignedPlainChar</name>
|
<name>CCSignedPlainChar</name>
|
||||||
<state>1</state>
|
<state>0</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>CCRequirePrototypes</name>
|
<name>CCRequirePrototypes</name>
|
||||||
|
|
@ -1381,7 +1381,7 @@
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>CCOptLevelSlave</name>
|
<name>CCOptLevelSlave</name>
|
||||||
<state>1</state>
|
<state>3</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>CompilerMisraRules98</name>
|
<name>CompilerMisraRules98</name>
|
||||||
|
|
@ -1644,15 +1644,15 @@
|
||||||
<option>
|
<option>
|
||||||
<name>OOCOutputFormat</name>
|
<name>OOCOutputFormat</name>
|
||||||
<version>3</version>
|
<version>3</version>
|
||||||
<state>0</state>
|
<state>3</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>OCOutputOverride</name>
|
<name>OCOutputOverride</name>
|
||||||
<state>0</state>
|
<state>1</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>OOCOutputFile</name>
|
<name>OOCOutputFile</name>
|
||||||
<state></state>
|
<state>../../rtthread.bin</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>OOCCommandLineProducer</name>
|
<name>OOCCommandLineProducer</name>
|
||||||
|
|
@ -1660,7 +1660,7 @@
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>OOCObjCopyEnable</name>
|
<name>OOCObjCopyEnable</name>
|
||||||
<state>0</state>
|
<state>1</state>
|
||||||
</option>
|
</option>
|
||||||
</data>
|
</data>
|
||||||
</settings>
|
</settings>
|
||||||
|
|
@ -1683,7 +1683,7 @@
|
||||||
<archiveVersion>1</archiveVersion>
|
<archiveVersion>1</archiveVersion>
|
||||||
<data>
|
<data>
|
||||||
<prebuild></prebuild>
|
<prebuild></prebuild>
|
||||||
<postbuild></postbuild>
|
<postbuild>cmd /c "$PROJ_DIR$\makeimg.bat"</postbuild>
|
||||||
</data>
|
</data>
|
||||||
</settings>
|
</settings>
|
||||||
<settings>
|
<settings>
|
||||||
|
|
@ -1743,7 +1743,7 @@
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>IlinkMapFile</name>
|
<name>IlinkMapFile</name>
|
||||||
<state>0</state>
|
<state>1</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>IlinkLogFile</name>
|
<name>IlinkLogFile</name>
|
||||||
|
|
@ -1767,11 +1767,11 @@
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>IlinkIcfOverride</name>
|
<name>IlinkIcfOverride</name>
|
||||||
<state>0</state>
|
<state>1</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>IlinkIcfFile</name>
|
<name>IlinkIcfFile</name>
|
||||||
<state>lnk0t.icf</state>
|
<state>$PROJ_DIR$\.\drivers\linker_scripts\link.icf</state>
|
||||||
</option>
|
</option>
|
||||||
<option>
|
<option>
|
||||||
<name>IlinkIcfFileSlave</name>
|
<name>IlinkIcfFileSlave</name>
|
||||||
|
|
|
||||||
|
|
@ -120,7 +120,7 @@
|
||||||
<SetRegEntry>
|
<SetRegEntry>
|
||||||
<Number>0</Number>
|
<Number>0</Number>
|
||||||
<Key>JL2CM3</Key>
|
<Key>JL2CM3</Key>
|
||||||
<Name>-U20090928 -O78 -S8 -ZTIFSpeedSel50000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0W600_QFlash -FS08000000 -FL0100000</Name>
|
<Name>-U20090928 -O78 -S8 -ZTIFSpeedSel50000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0W60X_QFlash -FS08000000 -FL0100000</Name>
|
||||||
</SetRegEntry>
|
</SetRegEntry>
|
||||||
<SetRegEntry>
|
<SetRegEntry>
|
||||||
<Number>0</Number>
|
<Number>0</Number>
|
||||||
|
|
|
||||||
|
|
@ -300,7 +300,7 @@
|
||||||
<OCR_RVCT9>
|
<OCR_RVCT9>
|
||||||
<Type>0</Type>
|
<Type>0</Type>
|
||||||
<StartAddress>0x20000000</StartAddress>
|
<StartAddress>0x20000000</StartAddress>
|
||||||
<Size>0x3c000</Size>
|
<Size>0x28000</Size>
|
||||||
</OCR_RVCT9>
|
</OCR_RVCT9>
|
||||||
<OCR_RVCT10>
|
<OCR_RVCT10>
|
||||||
<Type>0</Type>
|
<Type>0</Type>
|
||||||
|
|
@ -315,7 +315,7 @@
|
||||||
<Optim>1</Optim>
|
<Optim>1</Optim>
|
||||||
<oTime>0</oTime>
|
<oTime>0</oTime>
|
||||||
<SplitLS>0</SplitLS>
|
<SplitLS>0</SplitLS>
|
||||||
<OneElfS>0</OneElfS>
|
<OneElfS>1</OneElfS>
|
||||||
<Strict>0</Strict>
|
<Strict>0</Strict>
|
||||||
<EnumInt>0</EnumInt>
|
<EnumInt>0</EnumInt>
|
||||||
<PlainCh>0</PlainCh>
|
<PlainCh>0</PlainCh>
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue