libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity

sync nrf52840 some config files to nrf52832

This commit is contained in:
chenyingchun0312 2020-09-27 23:25:08 +08:00
parent e3d1ed45c6
commit 0051092c81
3 changed files with 57 additions and 80 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

78
bsp/nrf5x/nrf52832/board/Kconfig
View File

@ -6,6 +6,16 @@ config SOC_NRF52832
select RT_USING_COMPONENTS_INIT
select RT_USING_USER_MAIN
default y
config NRFX_CLOCK_ENABLED
int
default 1
config NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY
int
default 7
config NRFX_CLOCK_CONFIG_LF_SRC
int
default 1
config SOC_NORDIC
bool
@ -26,6 +36,11 @@ menu "On-chip Peripheral Drivers"
bool "Enable GPIO"
select RT_USING_PIN
default y
if BSP_USING_GPIO
config NRFX_GPIOTE_ENABLED
int
default 1
endif
config BSP_USING_SAADC
bool "Enable SAADC"
select RT_USING_ADC
@ -140,47 +155,25 @@ menu "On-chip Peripheral Drivers"
default 16
endif
endif
menuconfig BSP_USING_SOFTDEVICE
bool "Enable NRF SOFTDEVICE"
select PKG_USING_NRF5X_SDK
select NRFX_CLOCK_ENABLED
default n
if BSP_USING_SOFTDEVICE
config NRFX_CLOCK_ENABLED
int
default 1
config NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY
int
default 7
config NRFX_RTC_ENABLED
int
default 1
config NRFX_RTC1_ENABLED
int
default 1
config NRF_CLOCK_ENABLED
int
default 1
config NRF_SDH_BLE_ENABLED
int
default 1
config NRF_SDH_ENABLED
int
default 1
config NRF_SDH_SOC_ENABLED
int
default 1
endif
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config NRFX_UART_ENABLED
int
default 1
config BSP_USING_UART0
bool "Enable UART0"
default y
if BSP_USING_UART0
config NRFX_UART0_ENABLED
int
default 1
config BSP_UART0_RX_PIN
int "uart0 rx pin number"
range 0 31
@ -201,6 +194,9 @@ endif
default y
if BSP_USING_SPI
config NRFX_SPI_ENABLED
int
default 1
config BSP_USING_SPI0
bool "Enable SPI0 bus"
default y
@ -348,4 +344,24 @@ endif
endif
endmenu
choice
prompt "BLE STACK"
default BLE_STACK_USING_NULL
help
Select the ble stack
config BLE_STACK_USING_NULL
bool "not use the ble stack"
config BSP_USING_SOFTDEVICE
select PKG_USING_NRF5X_SDK
bool "Nordic softdevice(perpheral)"
config BSP_USING_NIMBLE
select PKG_USING_NIMBLE
select PKG_NIMBLE_BSP_NRF52840
bool "use nimble stack(iot)"
endchoice
endmenu

53
bsp/nrf5x/nrf52832/board/board.c
View File

@ -14,25 +14,8 @@
#include "board.h"
#include "drv_uart.h"
#ifdef BSP_USING_SOFTDEVICE
#include <nrfx_rtc.h>
#include <nrfx_clock.h>
#include "app_error.h"
#include "nrf_drv_clock.h"
const nrfx_rtc_t rtc = NRFX_RTC_INSTANCE(1); /**< Declaring an instance of nrf_drv_rtc for RTC0. */
static void rtc_handler(nrfx_rtc_int_type_t int_type)
{
if (int_type == NRFX_RTC_INT_TICK)
{
rt_interrupt_enter();
rt_tick_increase();
rt_interrupt_leave();
}
}
#else
/**
* This is the timer interrupt service routine.
*
@ -47,36 +30,14 @@ void SysTick_Handler(void)
/* leave interrupt */
rt_interrupt_leave();
}
#endif
static void clk_event_handler(nrfx_clock_evt_type_t event){}
void SysTick_Configuration(void)
{
#ifdef BSP_USING_SOFTDEVICE
nrf_drv_clock_init();
nrf_drv_clock_lfclk_request(NULL);
uint32_t err_code;
#define TICK_RATE_HZ RT_TICK_PER_SECOND
#define SYSTICK_CLOCK_HZ ( 32768UL )
#define NRF_RTC_REG NRF_RTC1
/* IRQn used by the selected RTC */
#define NRF_RTC_IRQn RTC1_IRQn
/* Constants required to manipulate the NVIC. */
#define NRF_RTC_PRESCALER ( (uint32_t) (NRFX_ROUNDED_DIV(SYSTICK_CLOCK_HZ, TICK_RATE_HZ) - 1) )
nrfx_rtc_config_t config = NRFX_RTC_DEFAULT_CONFIG;
config.prescaler = NRF_RTC_PRESCALER;
err_code = nrfx_rtc_init(&rtc, &config, rtc_handler);
// APP_ERROR_CHECK(err_code);
nrfx_rtc_tick_enable(&rtc, true);
#define COMPARE_COUNTERTIME (3UL) /**< Get Compare event COMPARE_TIME seconds after the counter starts from 0. */
//Set compare channel to trigger interrupt after COMPARE_COUNTERTIME seconds
err_code = nrfx_rtc_cc_set(&rtc, 0, COMPARE_COUNTERTIME * 8, true);
// APP_ERROR_CHECK(err_code);
//Power on RTC instance
nrfx_rtc_enable(&rtc);
#else
nrfx_clock_init(clk_event_handler);
nrfx_clock_enable();
nrfx_clock_lfclk_start();
/* Set interrupt priority */
NVIC_SetPriority(SysTick_IRQn, 0xf);
@ -85,7 +46,7 @@ void SysTick_Configuration(void)
nrf_systick_val_clear();
nrf_systick_csr_set(NRF_SYSTICK_CSR_CLKSOURCE_CPU | NRF_SYSTICK_CSR_TICKINT_ENABLE
| NRF_SYSTICK_CSR_ENABLE);
#endif
}

6
bsp/nrf5x/nrf52832/board/sdk_config.h
View File

@ -1899,7 +1899,7 @@
// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
//==========================================================
#ifndef NRFX_GPIOTE_ENABLED
#define NRFX_GPIOTE_ENABLED 1
#define NRFX_GPIOTE_ENABLED 0
#endif
// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins
#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
@ -4382,11 +4382,11 @@
// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
//==========================================================
#ifndef NRFX_UART_ENABLED
#define NRFX_UART_ENABLED 1
#define NRFX_UART_ENABLED 0
#endif
// <o> NRFX_UART0_ENABLED - Enable UART0 instance
#ifndef NRFX_UART0_ENABLED
#define NRFX_UART0_ENABLED 1
#define NRFX_UART0_ENABLED 0
#endif
// <o> NRFX_UART_DEFAULT_CONFIG_HWFC - Hardware Flow Control