rt-thread-official/bsp/tm4c129x/libraries/inc/hw_ints.h

492 lines
29 KiB
C
Raw Normal View History

//*****************************************************************************
//
// hw_ints.h - Macros that define the interrupt assignment on Tiva C Series
// MCUs.
//
// Copyright (c) 2005-2020 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 2.2.0.295 of the Tiva Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_INTS_H__
#define __HW_INTS_H__
//*****************************************************************************
//
// The following are defines for the fault assignments.
//
//*****************************************************************************
#define FAULT_NMI 2 // NMI fault
#define FAULT_HARD 3 // Hard fault
#define FAULT_MPU 4 // MPU fault
#define FAULT_BUS 5 // Bus fault
#define FAULT_USAGE 6 // Usage fault
#define FAULT_SVCALL 11 // SVCall
#define FAULT_DEBUG 12 // Debug monitor
#define FAULT_PENDSV 14 // PendSV
#define FAULT_SYSTICK 15 // System Tick
//*****************************************************************************
//
// TM4C123 Class Interrupts
//
//*****************************************************************************
#define INT_GPIOA_TM4C123 16 // GPIO Port A
#define INT_GPIOB_TM4C123 17 // GPIO Port B
#define INT_GPIOC_TM4C123 18 // GPIO Port C
#define INT_GPIOD_TM4C123 19 // GPIO Port D
#define INT_GPIOE_TM4C123 20 // GPIO Port E
#define INT_UART0_TM4C123 21 // UART0
#define INT_UART1_TM4C123 22 // UART1
#define INT_SSI0_TM4C123 23 // SSI0
#define INT_I2C0_TM4C123 24 // I2C0
#define INT_PWM0_FAULT_TM4C123 25 // PWM0 Fault
#define INT_PWM0_0_TM4C123 26 // PWM0 Generator 0
#define INT_PWM0_1_TM4C123 27 // PWM0 Generator 1
#define INT_PWM0_2_TM4C123 28 // PWM0 Generator 2
#define INT_QEI0_TM4C123 29 // QEI0
#define INT_ADC0SS0_TM4C123 30 // ADC0 Sequence 0
#define INT_ADC0SS1_TM4C123 31 // ADC0 Sequence 1
#define INT_ADC0SS2_TM4C123 32 // ADC0 Sequence 2
#define INT_ADC0SS3_TM4C123 33 // ADC0 Sequence 3
#define INT_WATCHDOG_TM4C123 34 // Watchdog Timers 0 and 1
#define INT_TIMER0A_TM4C123 35 // 16/32-Bit Timer 0A
#define INT_TIMER0B_TM4C123 36 // 16/32-Bit Timer 0B
#define INT_TIMER1A_TM4C123 37 // 16/32-Bit Timer 1A
#define INT_TIMER1B_TM4C123 38 // 16/32-Bit Timer 1B
#define INT_TIMER2A_TM4C123 39 // 16/32-Bit Timer 2A
#define INT_TIMER2B_TM4C123 40 // 16/32-Bit Timer 2B
#define INT_COMP0_TM4C123 41 // Analog Comparator 0
#define INT_COMP1_TM4C123 42 // Analog Comparator 1
#define INT_COMP2_TM4C123 43 // Analog Comparator 2
#define INT_SYSCTL_TM4C123 44 // System Control
#define INT_FLASH_TM4C123 45 // Flash Memory Control and EEPROM
// Control
#define INT_GPIOF_TM4C123 46 // GPIO Port F
#define INT_GPIOG_TM4C123 47 // GPIO Port G
#define INT_GPIOH_TM4C123 48 // GPIO Port H
#define INT_UART2_TM4C123 49 // UART2
#define INT_SSI1_TM4C123 50 // SSI1
#define INT_TIMER3A_TM4C123 51 // 16/32-Bit Timer 3A
#define INT_TIMER3B_TM4C123 52 // Timer 3B
#define INT_I2C1_TM4C123 53 // I2C1
#define INT_QEI1_TM4C123 54 // QEI1
#define INT_CAN0_TM4C123 55 // CAN0
#define INT_CAN1_TM4C123 56 // CAN1
#define INT_HIBERNATE_TM4C123 59 // Hibernation Module
#define INT_USB0_TM4C123 60 // USB
#define INT_PWM0_3_TM4C123 61 // PWM Generator 3
#define INT_UDMA_TM4C123 62 // uDMA Software
#define INT_UDMAERR_TM4C123 63 // uDMA Error
#define INT_ADC1SS0_TM4C123 64 // ADC1 Sequence 0
#define INT_ADC1SS1_TM4C123 65 // ADC1 Sequence 1
#define INT_ADC1SS2_TM4C123 66 // ADC1 Sequence 2
#define INT_ADC1SS3_TM4C123 67 // ADC1 Sequence 3
#define INT_GPIOJ_TM4C123 70 // GPIO Port J
#define INT_GPIOK_TM4C123 71 // GPIO Port K
#define INT_GPIOL_TM4C123 72 // GPIO Port L
#define INT_SSI2_TM4C123 73 // SSI2
#define INT_SSI3_TM4C123 74 // SSI3
#define INT_UART3_TM4C123 75 // UART3
#define INT_UART4_TM4C123 76 // UART4
#define INT_UART5_TM4C123 77 // UART5
#define INT_UART6_TM4C123 78 // UART6
#define INT_UART7_TM4C123 79 // UART7
#define INT_I2C2_TM4C123 84 // I2C2
#define INT_I2C3_TM4C123 85 // I2C3
#define INT_TIMER4A_TM4C123 86 // 16/32-Bit Timer 4A
#define INT_TIMER4B_TM4C123 87 // 16/32-Bit Timer 4B
#define INT_TIMER5A_TM4C123 108 // 16/32-Bit Timer 5A
#define INT_TIMER5B_TM4C123 109 // 16/32-Bit Timer 5B
#define INT_WTIMER0A_TM4C123 110 // 32/64-Bit Timer 0A
#define INT_WTIMER0B_TM4C123 111 // 32/64-Bit Timer 0B
#define INT_WTIMER1A_TM4C123 112 // 32/64-Bit Timer 1A
#define INT_WTIMER1B_TM4C123 113 // 32/64-Bit Timer 1B
#define INT_WTIMER2A_TM4C123 114 // 32/64-Bit Timer 2A
#define INT_WTIMER2B_TM4C123 115 // 32/64-Bit Timer 2B
#define INT_WTIMER3A_TM4C123 116 // 32/64-Bit Timer 3A
#define INT_WTIMER3B_TM4C123 117 // 32/64-Bit Timer 3B
#define INT_WTIMER4A_TM4C123 118 // 32/64-Bit Timer 4A
#define INT_WTIMER4B_TM4C123 119 // 32/64-Bit Timer 4B
#define INT_WTIMER5A_TM4C123 120 // 32/64-Bit Timer 5A
#define INT_WTIMER5B_TM4C123 121 // 32/64-Bit Timer 5B
#define INT_SYSEXC_TM4C123 122 // System Exception (imprecise)
#define INT_I2C4_TM4C123 125 // I2C4
#define INT_I2C5_TM4C123 126 // I2C5
#define INT_GPIOM_TM4C123 127 // GPIO Port M
#define INT_GPION_TM4C123 128 // GPIO Port N
#define INT_GPIOP0_TM4C123 132 // GPIO Port P (Summary or P0)
#define INT_GPIOP1_TM4C123 133 // GPIO Port P1
#define INT_GPIOP2_TM4C123 134 // GPIO Port P2
#define INT_GPIOP3_TM4C123 135 // GPIO Port P3
#define INT_GPIOP4_TM4C123 136 // GPIO Port P4
#define INT_GPIOP5_TM4C123 137 // GPIO Port P5
#define INT_GPIOP6_TM4C123 138 // GPIO Port P6
#define INT_GPIOP7_TM4C123 139 // GPIO Port P7
#define INT_GPIOQ0_TM4C123 140 // GPIO Port Q (Summary or Q0)
#define INT_GPIOQ1_TM4C123 141 // GPIO Port Q1
#define INT_GPIOQ2_TM4C123 142 // GPIO Port Q2
#define INT_GPIOQ3_TM4C123 143 // GPIO Port Q3
#define INT_GPIOQ4_TM4C123 144 // GPIO Port Q4
#define INT_GPIOQ5_TM4C123 145 // GPIO Port Q5
#define INT_GPIOQ6_TM4C123 146 // GPIO Port Q6
#define INT_GPIOQ7_TM4C123 147 // GPIO Port Q7
#define INT_PWM1_0_TM4C123 150 // PWM1 Generator 0
#define INT_PWM1_1_TM4C123 151 // PWM1 Generator 1
#define INT_PWM1_2_TM4C123 152 // PWM1 Generator 2
#define INT_PWM1_3_TM4C123 153 // PWM1 Generator 3
#define INT_PWM1_FAULT_TM4C123 154 // PWM1 Fault
#define NUM_INTERRUPTS_TM4C123 155
//*****************************************************************************
//
// TM4C129 Class Interrupts
//
//*****************************************************************************
#define INT_GPIOA_TM4C129 16 // GPIO Port A
#define INT_GPIOB_TM4C129 17 // GPIO Port B
#define INT_GPIOC_TM4C129 18 // GPIO Port C
#define INT_GPIOD_TM4C129 19 // GPIO Port D
#define INT_GPIOE_TM4C129 20 // GPIO Port E
#define INT_UART0_TM4C129 21 // UART0
#define INT_UART1_TM4C129 22 // UART1
#define INT_SSI0_TM4C129 23 // SSI0
#define INT_I2C0_TM4C129 24 // I2C0
#define INT_PWM0_FAULT_TM4C129 25 // PWM Fault
#define INT_PWM0_0_TM4C129 26 // PWM Generator 0
#define INT_PWM0_1_TM4C129 27 // PWM Generator 1
#define INT_PWM0_2_TM4C129 28 // PWM Generator 2
#define INT_QEI0_TM4C129 29 // QEI0
#define INT_ADC0SS0_TM4C129 30 // ADC0 Sequence 0
#define INT_ADC0SS1_TM4C129 31 // ADC0 Sequence 1
#define INT_ADC0SS2_TM4C129 32 // ADC0 Sequence 2
#define INT_ADC0SS3_TM4C129 33 // ADC0 Sequence 3
#define INT_WATCHDOG_TM4C129 34 // Watchdog Timers 0 and 1
#define INT_TIMER0A_TM4C129 35 // 16/32-Bit Timer 0A
#define INT_TIMER0B_TM4C129 36 // 16/32-Bit Timer 0B
#define INT_TIMER1A_TM4C129 37 // 16/32-Bit Timer 1A
#define INT_TIMER1B_TM4C129 38 // 16/32-Bit Timer 1B
#define INT_TIMER2A_TM4C129 39 // 16/32-Bit Timer 2A
#define INT_TIMER2B_TM4C129 40 // 16/32-Bit Timer 2B
#define INT_COMP0_TM4C129 41 // Analog Comparator 0
#define INT_COMP1_TM4C129 42 // Analog Comparator 1
#define INT_COMP2_TM4C129 43 // Analog Comparator 2
#define INT_SYSCTL_TM4C129 44 // System Control
#define INT_FLASH_TM4C129 45 // Flash Memory Control
#define INT_GPIOF_TM4C129 46 // GPIO Port F
#define INT_GPIOG_TM4C129 47 // GPIO Port G
#define INT_GPIOH_TM4C129 48 // GPIO Port H
#define INT_UART2_TM4C129 49 // UART2
#define INT_SSI1_TM4C129 50 // SSI1
#define INT_TIMER3A_TM4C129 51 // 16/32-Bit Timer 3A
#define INT_TIMER3B_TM4C129 52 // 16/32-Bit Timer 3B
#define INT_I2C1_TM4C129 53 // I2C1
#define INT_CAN0_TM4C129 54 // CAN 0
#define INT_CAN1_TM4C129 55 // CAN1
#define INT_EMAC0_TM4C129 56 // Ethernet MAC
#define INT_HIBERNATE_TM4C129 57 // HIB
#define INT_USB0_TM4C129 58 // USB MAC
#define INT_PWM0_3_TM4C129 59 // PWM Generator 3
#define INT_UDMA_TM4C129 60 // uDMA 0 Software
#define INT_UDMAERR_TM4C129 61 // uDMA 0 Error
#define INT_ADC1SS0_TM4C129 62 // ADC1 Sequence 0
#define INT_ADC1SS1_TM4C129 63 // ADC1 Sequence 1
#define INT_ADC1SS2_TM4C129 64 // ADC1 Sequence 2
#define INT_ADC1SS3_TM4C129 65 // ADC1 Sequence 3
#define INT_EPI0_TM4C129 66 // EPI 0
#define INT_GPIOJ_TM4C129 67 // GPIO Port J
#define INT_GPIOK_TM4C129 68 // GPIO Port K
#define INT_GPIOL_TM4C129 69 // GPIO Port L
#define INT_SSI2_TM4C129 70 // SSI 2
#define INT_SSI3_TM4C129 71 // SSI 3
#define INT_UART3_TM4C129 72 // UART 3
#define INT_UART4_TM4C129 73 // UART 4
#define INT_UART5_TM4C129 74 // UART 5
#define INT_UART6_TM4C129 75 // UART 6
#define INT_UART7_TM4C129 76 // UART 7
#define INT_I2C2_TM4C129 77 // I2C 2
#define INT_I2C3_TM4C129 78 // I2C 3
#define INT_TIMER4A_TM4C129 79 // Timer 4A
#define INT_TIMER4B_TM4C129 80 // Timer 4B
#define INT_TIMER5A_TM4C129 81 // Timer 5A
#define INT_TIMER5B_TM4C129 82 // Timer 5B
#define INT_SYSEXC_TM4C129 83 // Floating-Point Exception
// (imprecise)
#define INT_I2C4_TM4C129 86 // I2C 4
#define INT_I2C5_TM4C129 87 // I2C 5
#define INT_GPIOM_TM4C129 88 // GPIO Port M
#define INT_GPION_TM4C129 89 // GPIO Port N
#define INT_TAMPER0_TM4C129 91 // Tamper
#define INT_GPIOP0_TM4C129 92 // GPIO Port P (Summary or P0)
#define INT_GPIOP1_TM4C129 93 // GPIO Port P1
#define INT_GPIOP2_TM4C129 94 // GPIO Port P2
#define INT_GPIOP3_TM4C129 95 // GPIO Port P3
#define INT_GPIOP4_TM4C129 96 // GPIO Port P4
#define INT_GPIOP5_TM4C129 97 // GPIO Port P5
#define INT_GPIOP6_TM4C129 98 // GPIO Port P6
#define INT_GPIOP7_TM4C129 99 // GPIO Port P7
#define INT_GPIOQ0_TM4C129 100 // GPIO Port Q (Summary or Q0)
#define INT_GPIOQ1_TM4C129 101 // GPIO Port Q1
#define INT_GPIOQ2_TM4C129 102 // GPIO Port Q2
#define INT_GPIOQ3_TM4C129 103 // GPIO Port Q3
#define INT_GPIOQ4_TM4C129 104 // GPIO Port Q4
#define INT_GPIOQ5_TM4C129 105 // GPIO Port Q5
#define INT_GPIOQ6_TM4C129 106 // GPIO Port Q6
#define INT_GPIOQ7_TM4C129 107 // GPIO Port Q7
#define INT_GPIOR_TM4C129 108 // GPIO Port R
#define INT_GPIOS_TM4C129 109 // GPIO Port S
#define INT_SHA0_TM4C129 110 // SHA/MD5
#define INT_AES0_TM4C129 111 // AES
#define INT_DES0_TM4C129 112 // DES
#define INT_LCD0_TM4C129 113 // LCD
#define INT_TIMER6A_TM4C129 114 // 16/32-Bit Timer 6A
#define INT_TIMER6B_TM4C129 115 // 16/32-Bit Timer 6B
#define INT_TIMER7A_TM4C129 116 // 16/32-Bit Timer 7A
#define INT_TIMER7B_TM4C129 117 // 16/32-Bit Timer 7B
#define INT_I2C6_TM4C129 118 // I2C 6
#define INT_I2C7_TM4C129 119 // I2C 7
#define INT_ONEWIRE0_TM4C129 121 // 1-Wire
#define INT_I2C8_TM4C129 125 // I2C 8
#define INT_I2C9_TM4C129 126 // I2C 9
#define INT_GPIOT_TM4C129 127 // GPIO T
#define NUM_INTERRUPTS_TM4C129 129
//*****************************************************************************
//
// TM4C123 Interrupt Class Definition
//
//*****************************************************************************
#if defined(TARGET_IS_TM4C123_RA1) || defined(TARGET_IS_TM4C123_RA2) || \
defined(TARGET_IS_TM4C123_RA3) || defined(TARGET_IS_TM4C123_RB0) || \
defined(TARGET_IS_TM4C123_RB1) || defined(PART_TM4C1230C3PM) || \
defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) || \
defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || \
defined(PART_TM4C1231D5PM) || defined(PART_TM4C1231D5PZ) || \
defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) || \
defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) || \
defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || \
defined(PART_TM4C1232E6PM) || defined(PART_TM4C1232H6PM) || \
defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) || \
defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || \
defined(PART_TM4C1233E6PZ) || defined(PART_TM4C1233H6PM) || \
defined(PART_TM4C1233H6PZ) || defined(PART_TM4C1236D5PM) || \
defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) || \
defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || \
defined(PART_TM4C1237E6PM) || defined(PART_TM4C1237E6PZ) || \
defined(PART_TM4C1237H6PM) || defined(PART_TM4C1237H6PZ) || \
defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) || \
defined(PART_TM4C123BE6PM) || defined(PART_TM4C123BE6PZ) || \
defined(PART_TM4C123BH6PM) || defined(PART_TM4C123BH6PZ) || \
defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) || \
defined(PART_TM4C123GE6PM) || defined(PART_TM4C123GE6PZ) || \
defined(PART_TM4C123GH6PM) || defined(PART_TM4C123GH6PZ) || \
defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1233H6PGE) || \
defined(PART_TM4C1237H6PGE) || defined(PART_TM4C123BH6PGE) || \
defined(PART_TM4C123BH6ZRB) || defined(PART_TM4C123GH6PGE) || \
defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH6ZXR)
#define INT_RESOLVE(intname, class) intname##TM4C123
//*****************************************************************************
//
// TM4C129 Interrupt Class Definition
//
//*****************************************************************************
#elif defined(TARGET_IS_TM4C129_RA0) || defined(PART_TM4C1290NCPDT) || \
defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT) || \
defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || \
defined(PART_TM4C1294NCPDT) || defined(PART_TM4C1294NCZAD) || \
defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD) || \
defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || \
defined(PART_TM4C129CNCZAD) || defined(PART_TM4C129DNCPDT) || \
defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT) || \
defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || \
defined(PART_TM4C129LNCZAD) || defined(PART_TM4C129XKCZAD) || \
defined(PART_TM4C129XNCZAD)
#define INT_RESOLVE(intname, class) intname##TM4C129
#else
#define INT_DEVICE_CLASS "UNKNOWN"
#endif
//*****************************************************************************
//
// Macros to resolve the INT_PERIPH_CLASS name to a common INT_PERIPH name.
//
//*****************************************************************************
#define INT_CONCAT(intname, class) INT_RESOLVE(intname, class)
//*****************************************************************************
//
// The following are defines for the interrupt assignments.
//
//*****************************************************************************
#define INT_ADC0SS0 INT_CONCAT(INT_ADC0SS0_, INT_DEVICE_CLASS)
#define INT_ADC0SS1 INT_CONCAT(INT_ADC0SS1_, INT_DEVICE_CLASS)
#define INT_ADC0SS2 INT_CONCAT(INT_ADC0SS2_, INT_DEVICE_CLASS)
#define INT_ADC0SS3 INT_CONCAT(INT_ADC0SS3_, INT_DEVICE_CLASS)
#define INT_ADC1SS0 INT_CONCAT(INT_ADC1SS0_, INT_DEVICE_CLASS)
#define INT_ADC1SS1 INT_CONCAT(INT_ADC1SS1_, INT_DEVICE_CLASS)
#define INT_ADC1SS2 INT_CONCAT(INT_ADC1SS2_, INT_DEVICE_CLASS)
#define INT_ADC1SS3 INT_CONCAT(INT_ADC1SS3_, INT_DEVICE_CLASS)
#define INT_AES0 INT_CONCAT(INT_AES0_, INT_DEVICE_CLASS)
#define INT_CAN0 INT_CONCAT(INT_CAN0_, INT_DEVICE_CLASS)
#define INT_CAN1 INT_CONCAT(INT_CAN1_, INT_DEVICE_CLASS)
#define INT_COMP0 INT_CONCAT(INT_COMP0_, INT_DEVICE_CLASS)
#define INT_COMP1 INT_CONCAT(INT_COMP1_, INT_DEVICE_CLASS)
#define INT_COMP2 INT_CONCAT(INT_COMP2_, INT_DEVICE_CLASS)
#define INT_DES0 INT_CONCAT(INT_DES0_, INT_DEVICE_CLASS)
#define INT_EMAC0 INT_CONCAT(INT_EMAC0_, INT_DEVICE_CLASS)
#define INT_EPI0 INT_CONCAT(INT_EPI0_, INT_DEVICE_CLASS)
#define INT_FLASH INT_CONCAT(INT_FLASH_, INT_DEVICE_CLASS)
#define INT_GPIOA INT_CONCAT(INT_GPIOA_, INT_DEVICE_CLASS)
#define INT_GPIOB INT_CONCAT(INT_GPIOB_, INT_DEVICE_CLASS)
#define INT_GPIOC INT_CONCAT(INT_GPIOC_, INT_DEVICE_CLASS)
#define INT_GPIOD INT_CONCAT(INT_GPIOD_, INT_DEVICE_CLASS)
#define INT_GPIOE INT_CONCAT(INT_GPIOE_, INT_DEVICE_CLASS)
#define INT_GPIOF INT_CONCAT(INT_GPIOF_, INT_DEVICE_CLASS)
#define INT_GPIOG INT_CONCAT(INT_GPIOG_, INT_DEVICE_CLASS)
#define INT_GPIOH INT_CONCAT(INT_GPIOH_, INT_DEVICE_CLASS)
#define INT_GPIOJ INT_CONCAT(INT_GPIOJ_, INT_DEVICE_CLASS)
#define INT_GPIOK INT_CONCAT(INT_GPIOK_, INT_DEVICE_CLASS)
#define INT_GPIOL INT_CONCAT(INT_GPIOL_, INT_DEVICE_CLASS)
#define INT_GPIOM INT_CONCAT(INT_GPIOM_, INT_DEVICE_CLASS)
#define INT_GPION INT_CONCAT(INT_GPION_, INT_DEVICE_CLASS)
#define INT_GPIOP0 INT_CONCAT(INT_GPIOP0_, INT_DEVICE_CLASS)
#define INT_GPIOP1 INT_CONCAT(INT_GPIOP1_, INT_DEVICE_CLASS)
#define INT_GPIOP2 INT_CONCAT(INT_GPIOP2_, INT_DEVICE_CLASS)
#define INT_GPIOP3 INT_CONCAT(INT_GPIOP3_, INT_DEVICE_CLASS)
#define INT_GPIOP4 INT_CONCAT(INT_GPIOP4_, INT_DEVICE_CLASS)
#define INT_GPIOP5 INT_CONCAT(INT_GPIOP5_, INT_DEVICE_CLASS)
#define INT_GPIOP6 INT_CONCAT(INT_GPIOP6_, INT_DEVICE_CLASS)
#define INT_GPIOP7 INT_CONCAT(INT_GPIOP7_, INT_DEVICE_CLASS)
#define INT_GPIOQ0 INT_CONCAT(INT_GPIOQ0_, INT_DEVICE_CLASS)
#define INT_GPIOQ1 INT_CONCAT(INT_GPIOQ1_, INT_DEVICE_CLASS)
#define INT_GPIOQ2 INT_CONCAT(INT_GPIOQ2_, INT_DEVICE_CLASS)
#define INT_GPIOQ3 INT_CONCAT(INT_GPIOQ3_, INT_DEVICE_CLASS)
#define INT_GPIOQ4 INT_CONCAT(INT_GPIOQ4_, INT_DEVICE_CLASS)
#define INT_GPIOQ5 INT_CONCAT(INT_GPIOQ5_, INT_DEVICE_CLASS)
#define INT_GPIOQ6 INT_CONCAT(INT_GPIOQ6_, INT_DEVICE_CLASS)
#define INT_GPIOQ7 INT_CONCAT(INT_GPIOQ7_, INT_DEVICE_CLASS)
#define INT_GPIOR INT_CONCAT(INT_GPIOR_, INT_DEVICE_CLASS)
#define INT_GPIOS INT_CONCAT(INT_GPIOS_, INT_DEVICE_CLASS)
#define INT_GPIOT INT_CONCAT(INT_GPIOT_, INT_DEVICE_CLASS)
#define INT_HIBERNATE INT_CONCAT(INT_HIBERNATE_, INT_DEVICE_CLASS)
#define INT_I2C0 INT_CONCAT(INT_I2C0_, INT_DEVICE_CLASS)
#define INT_I2C1 INT_CONCAT(INT_I2C1_, INT_DEVICE_CLASS)
#define INT_I2C2 INT_CONCAT(INT_I2C2_, INT_DEVICE_CLASS)
#define INT_I2C3 INT_CONCAT(INT_I2C3_, INT_DEVICE_CLASS)
#define INT_I2C4 INT_CONCAT(INT_I2C4_, INT_DEVICE_CLASS)
#define INT_I2C5 INT_CONCAT(INT_I2C5_, INT_DEVICE_CLASS)
#define INT_I2C6 INT_CONCAT(INT_I2C6_, INT_DEVICE_CLASS)
#define INT_I2C7 INT_CONCAT(INT_I2C7_, INT_DEVICE_CLASS)
#define INT_I2C8 INT_CONCAT(INT_I2C8_, INT_DEVICE_CLASS)
#define INT_I2C9 INT_CONCAT(INT_I2C9_, INT_DEVICE_CLASS)
#define INT_LCD0 INT_CONCAT(INT_LCD0_, INT_DEVICE_CLASS)
#define INT_ONEWIRE0 INT_CONCAT(INT_ONEWIRE0_, INT_DEVICE_CLASS)
#define INT_PWM0_0 INT_CONCAT(INT_PWM0_0_, INT_DEVICE_CLASS)
#define INT_PWM0_1 INT_CONCAT(INT_PWM0_1_, INT_DEVICE_CLASS)
#define INT_PWM0_2 INT_CONCAT(INT_PWM0_2_, INT_DEVICE_CLASS)
#define INT_PWM0_3 INT_CONCAT(INT_PWM0_3_, INT_DEVICE_CLASS)
#define INT_PWM0_FAULT INT_CONCAT(INT_PWM0_FAULT_, INT_DEVICE_CLASS)
#define INT_PWM1_0 INT_CONCAT(INT_PWM1_0_, INT_DEVICE_CLASS)
#define INT_PWM1_1 INT_CONCAT(INT_PWM1_1_, INT_DEVICE_CLASS)
#define INT_PWM1_2 INT_CONCAT(INT_PWM1_2_, INT_DEVICE_CLASS)
#define INT_PWM1_3 INT_CONCAT(INT_PWM1_3_, INT_DEVICE_CLASS)
#define INT_PWM1_FAULT INT_CONCAT(INT_PWM1_FAULT_, INT_DEVICE_CLASS)
#define INT_QEI0 INT_CONCAT(INT_QEI0_, INT_DEVICE_CLASS)
#define INT_QEI1 INT_CONCAT(INT_QEI1_, INT_DEVICE_CLASS)
#define INT_SHA0 INT_CONCAT(INT_SHA0_, INT_DEVICE_CLASS)
#define INT_SSI0 INT_CONCAT(INT_SSI0_, INT_DEVICE_CLASS)
#define INT_SSI1 INT_CONCAT(INT_SSI1_, INT_DEVICE_CLASS)
#define INT_SSI2 INT_CONCAT(INT_SSI2_, INT_DEVICE_CLASS)
#define INT_SSI3 INT_CONCAT(INT_SSI3_, INT_DEVICE_CLASS)
#define INT_SYSCTL INT_CONCAT(INT_SYSCTL_, INT_DEVICE_CLASS)
#define INT_SYSEXC INT_CONCAT(INT_SYSEXC_, INT_DEVICE_CLASS)
#define INT_TAMPER0 INT_CONCAT(INT_TAMPER0_, INT_DEVICE_CLASS)
#define INT_TIMER0A INT_CONCAT(INT_TIMER0A_, INT_DEVICE_CLASS)
#define INT_TIMER0B INT_CONCAT(INT_TIMER0B_, INT_DEVICE_CLASS)
#define INT_TIMER1A INT_CONCAT(INT_TIMER1A_, INT_DEVICE_CLASS)
#define INT_TIMER1B INT_CONCAT(INT_TIMER1B_, INT_DEVICE_CLASS)
#define INT_TIMER2A INT_CONCAT(INT_TIMER2A_, INT_DEVICE_CLASS)
#define INT_TIMER2B INT_CONCAT(INT_TIMER2B_, INT_DEVICE_CLASS)
#define INT_TIMER3A INT_CONCAT(INT_TIMER3A_, INT_DEVICE_CLASS)
#define INT_TIMER3B INT_CONCAT(INT_TIMER3B_, INT_DEVICE_CLASS)
#define INT_TIMER4A INT_CONCAT(INT_TIMER4A_, INT_DEVICE_CLASS)
#define INT_TIMER4B INT_CONCAT(INT_TIMER4B_, INT_DEVICE_CLASS)
#define INT_TIMER5A INT_CONCAT(INT_TIMER5A_, INT_DEVICE_CLASS)
#define INT_TIMER5B INT_CONCAT(INT_TIMER5B_, INT_DEVICE_CLASS)
#define INT_TIMER6A INT_CONCAT(INT_TIMER6A_, INT_DEVICE_CLASS)
#define INT_TIMER6B INT_CONCAT(INT_TIMER6B_, INT_DEVICE_CLASS)
#define INT_TIMER7A INT_CONCAT(INT_TIMER7A_, INT_DEVICE_CLASS)
#define INT_TIMER7B INT_CONCAT(INT_TIMER7B_, INT_DEVICE_CLASS)
#define INT_UART0 INT_CONCAT(INT_UART0_, INT_DEVICE_CLASS)
#define INT_UART1 INT_CONCAT(INT_UART1_, INT_DEVICE_CLASS)
#define INT_UART2 INT_CONCAT(INT_UART2_, INT_DEVICE_CLASS)
#define INT_UART3 INT_CONCAT(INT_UART3_, INT_DEVICE_CLASS)
#define INT_UART4 INT_CONCAT(INT_UART4_, INT_DEVICE_CLASS)
#define INT_UART5 INT_CONCAT(INT_UART5_, INT_DEVICE_CLASS)
#define INT_UART6 INT_CONCAT(INT_UART6_, INT_DEVICE_CLASS)
#define INT_UART7 INT_CONCAT(INT_UART7_, INT_DEVICE_CLASS)
#define INT_UDMA INT_CONCAT(INT_UDMA_, INT_DEVICE_CLASS)
#define INT_UDMAERR INT_CONCAT(INT_UDMAERR_, INT_DEVICE_CLASS)
#define INT_USB0 INT_CONCAT(INT_USB0_, INT_DEVICE_CLASS)
#define INT_WATCHDOG INT_CONCAT(INT_WATCHDOG_, INT_DEVICE_CLASS)
#define INT_WTIMER0A INT_CONCAT(INT_WTIMER0A_, INT_DEVICE_CLASS)
#define INT_WTIMER0B INT_CONCAT(INT_WTIMER0B_, INT_DEVICE_CLASS)
#define INT_WTIMER1A INT_CONCAT(INT_WTIMER1A_, INT_DEVICE_CLASS)
#define INT_WTIMER1B INT_CONCAT(INT_WTIMER1B_, INT_DEVICE_CLASS)
#define INT_WTIMER2A INT_CONCAT(INT_WTIMER2A_, INT_DEVICE_CLASS)
#define INT_WTIMER2B INT_CONCAT(INT_WTIMER2B_, INT_DEVICE_CLASS)
#define INT_WTIMER3A INT_CONCAT(INT_WTIMER3A_, INT_DEVICE_CLASS)
#define INT_WTIMER3B INT_CONCAT(INT_WTIMER3B_, INT_DEVICE_CLASS)
#define INT_WTIMER4A INT_CONCAT(INT_WTIMER4A_, INT_DEVICE_CLASS)
#define INT_WTIMER4B INT_CONCAT(INT_WTIMER4B_, INT_DEVICE_CLASS)
#define INT_WTIMER5A INT_CONCAT(INT_WTIMER5A_, INT_DEVICE_CLASS)
#define INT_WTIMER5B INT_CONCAT(INT_WTIMER5B_, INT_DEVICE_CLASS)
//*****************************************************************************
//
// The following are defines for the total number of interrupts.
//
//*****************************************************************************
#define NUM_INTERRUPTS INT_CONCAT(NUM_INTERRUPTS_, INT_DEVICE_CLASS)
//*****************************************************************************
//
// The following are defines for the total number of priority levels.
//
//*****************************************************************************
#define NUM_PRIORITY 8
#define NUM_PRIORITY_BITS 3
#endif // __HW_INTS_H__