rt-thread-official/bsp/renesas/rzt2m_rsk/rzt_gen/hal_data.c

111 lines
4.3 KiB
C
Raw Normal View History

/* generated HAL source file - do not edit */
#include "hal_data.h"
sci_uart_instance_ctrl_t g_uart0_ctrl;
#define FSP_NOT_DEFINED (1)
#if (FSP_NOT_DEFINED) != (FSP_NOT_DEFINED)
/* If the transfer module is DMAC, define a DMAC transfer callback. */
extern void sci_uart_tx_dmac_callback(sci_uart_instance_ctrl_t * p_instance_ctrl);
void g_uart0_tx_transfer_callback (transfer_callback_args_t * p_args)
{
FSP_PARAMETER_NOT_USED(p_args);
sci_uart_tx_dmac_callback(&g_uart0_ctrl);
}
#endif
#if (FSP_NOT_DEFINED) != (FSP_NOT_DEFINED)
/* If the transfer module is DMAC, define a DMAC transfer callback. */
extern void sci_uart_rx_dmac_callback(sci_uart_instance_ctrl_t * p_instance_ctrl);
void g_uart0_rx_transfer_callback (transfer_callback_args_t * p_args)
{
FSP_PARAMETER_NOT_USED(p_args);
sci_uart_rx_dmac_callback(&g_uart0_ctrl);
}
#endif
#undef FSP_NOT_DEFINED
sci_baud_setting_t g_uart0_baud_setting =
{
/* Baud rate calculated with 0.160% error. */ .baudrate_bits_b.abcse = 0, .baudrate_bits_b.abcs = 0, .baudrate_bits_b.bgdm = 1, .baudrate_bits_b.cks = 0, .baudrate_bits_b.brr = 51, .baudrate_bits_b.mddr = (uint8_t) 256, .baudrate_bits_b.brme = false
};
/** UART extended configuration for UARTonSCI HAL driver */
const sci_uart_extended_cfg_t g_uart0_cfg_extend =
{
.clock = SCI_UART_CLOCK_INT,
.rx_edge_start = SCI_UART_START_BIT_FALLING_EDGE,
.noise_cancel = SCI_UART_NOISE_CANCELLATION_DISABLE,
.rx_fifo_trigger = SCI_UART_RX_FIFO_TRIGGER_MAX,
.p_baud_setting = &g_uart0_baud_setting,
#if 1
.clock_source = SCI_UART_CLOCK_SOURCE_SCI0ASYNCCLK,
#else
.clock_source = SCI_UART_CLOCK_SOURCE_PCLKM,
#endif
.flow_control = SCI_UART_FLOW_CONTROL_RTS,
#if 0xFF != 0xFF
.flow_control_pin = BSP_IO_PORT_FF_PIN_0xFF,
#else
.flow_control_pin = (bsp_io_port_pin_t) UINT16_MAX,
#endif
.rs485_setting = {
.enable = SCI_UART_RS485_DISABLE,
.polarity = SCI_UART_RS485_DE_POLARITY_HIGH,
.assertion_time = 1,
.negation_time = 1,
},
};
/** UART interface configuration */
const uart_cfg_t g_uart0_cfg =
{
.channel = 0,
.data_bits = UART_DATA_BITS_8,
.parity = UART_PARITY_OFF,
.stop_bits = UART_STOP_BITS_1,
.p_callback = user_uart0_callback,
.p_context = NULL,
.p_extend = &g_uart0_cfg_extend,
.p_transfer_tx = g_uart0_P_TRANSFER_TX,
.p_transfer_rx = g_uart0_P_TRANSFER_RX,
.rxi_ipl = (12),
.txi_ipl = (12),
.tei_ipl = (12),
.eri_ipl = (12),
#if defined(VECTOR_NUMBER_SCI0_RXI)
.rxi_irq = VECTOR_NUMBER_SCI0_RXI,
#else
.rxi_irq = FSP_INVALID_VECTOR,
#endif
#if defined(VECTOR_NUMBER_SCI0_TXI)
.txi_irq = VECTOR_NUMBER_SCI0_TXI,
#else
.txi_irq = FSP_INVALID_VECTOR,
#endif
#if defined(VECTOR_NUMBER_SCI0_TEI)
.tei_irq = VECTOR_NUMBER_SCI0_TEI,
#else
.tei_irq = FSP_INVALID_VECTOR,
#endif
#if defined(VECTOR_NUMBER_SCI0_ERI)
.eri_irq = VECTOR_NUMBER_SCI0_ERI,
#else
.eri_irq = FSP_INVALID_VECTOR,
#endif
};
/* Instance structure to use this module. */
const uart_instance_t g_uart0 =
{
.p_ctrl = &g_uart0_ctrl,
.p_cfg = &g_uart0_cfg,
.p_api = &g_uart_on_sci
};
void g_hal_init(void) {
g_common_init();
}